dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

Merge branch 'for-rmk' of git://git.marvell.com/orion into devel

This commit is contained in:
Russell King 2009-06-08 19:27:13 +01:00 committed by Russell King
parent 2d8d24935d ae5c8c8373
commit 7698fdedcf
264 changed files with 3622 additions and 1516 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
Documentation/hwmon/sysfs-interface
View File

@ -150,6 +150,11 @@ fan[1-*]_min Fan minimum value
Unit: revolution/min (RPM)
RW
fan[1-*]_max Fan maximum value
Unit: revolution/min (RPM)
Only rarely supported by the hardware.
RW
fan[1-*]_input Fan input value.
Unit: revolution/min (RPM)
RO
@ -390,6 +395,7 @@ OR
in[0-*]_min_alarm
in[0-*]_max_alarm
fan[1-*]_min_alarm
fan[1-*]_max_alarm
temp[1-*]_min_alarm
temp[1-*]_max_alarm
temp[1-*]_crit_alarm

103
Documentation/input/multi-touch-protocol.txt
View File

@ -18,8 +18,12 @@ Usage
Anonymous finger details are sent sequentially as separate packets of ABS
events. Only the ABS_MT events are recognized as part of a finger
packet. The end of a packet is marked by calling the input_mt_sync()
function, which generates a SYN_MT_REPORT event. The end of multi-touch
transfer is marked by calling the usual input_sync() function.
function, which generates a SYN_MT_REPORT event. This instructs the
receiver to accept the data for the current finger and prepare to receive
another. The end of a multi-touch transfer is marked by calling the usual
input_sync() function. This instructs the receiver to act upon events
accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new
set of events/packets.
A set of ABS_MT events with the desired properties is defined. The events
are divided into categories, to allow for partial implementation. The
@ -27,11 +31,26 @@ minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the
device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
of the approaching finger. Anisotropy and direction may be specified with
ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with
more granular information may specify general shapes as blobs, i.e., as a
sequence of rectangular shapes grouped together by an
ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify
whether the touching tool is a finger or a pen or something else.
ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. The
ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
finger or a pen or something else. Devices with more granular information
may specify general shapes as blobs, i.e., as a sequence of rectangular
shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
that currently support it, the ABS_MT_TRACKING_ID event may be used to
report finger tracking from hardware [5].
Here is what a minimal event sequence for a two-finger touch would look
like:
ABS_MT_TOUCH_MAJOR
ABS_MT_POSITION_X
ABS_MT_POSITION_Y
SYN_MT_REPORT
ABS_MT_TOUCH_MAJOR
ABS_MT_POSITION_X
ABS_MT_POSITION_Y
SYN_MT_REPORT
SYN_REPORT
Event Semantics
@ -44,24 +63,24 @@ ABS_MT_TOUCH_MAJOR
The length of the major axis of the contact. The length should be given in
surface units. If the surface has an X times Y resolution, the largest
possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal.
possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal [4].
ABS_MT_TOUCH_MINOR
The length, in surface units, of the minor axis of the contact. If the
contact is circular, this event can be omitted.
contact is circular, this event can be omitted [4].
ABS_MT_WIDTH_MAJOR
The length, in surface units, of the major axis of the approaching
tool. This should be understood as the size of the tool itself. The
orientation of the contact and the approaching tool are assumed to be the
same.
same [4].
ABS_MT_WIDTH_MINOR
The length, in surface units, of the minor axis of the approaching
tool. Omit if circular.
tool. Omit if circular [4].
The above four values can be used to derive additional information about
the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
@ -70,14 +89,17 @@ different characteristic widths [1].
ABS_MT_ORIENTATION
The orientation of the ellipse. The value should describe half a revolution
clockwise around the touch center. The scale of the value is arbitrary, but
zero should be returned for an ellipse aligned along the Y axis of the
surface. As an example, an index finger placed straight onto the axis could
return zero orientation, something negative when twisted to the left, and
something positive when twisted to the right. This value can be omitted if
the touching object is circular, or if the information is not available in
the kernel driver.
The orientation of the ellipse. The value should describe a signed quarter
of a revolution clockwise around the touch center. The signed value range
is arbitrary, but zero should be returned for a finger aligned along the Y
axis of the surface, a negative value when finger is turned to the left, and
a positive value when finger turned to the right. When completely aligned with
the X axis, the range max should be returned. Orientation can be omitted
if the touching object is circular, or if the information is not available
in the kernel driver. Partial orientation support is possible if the device
can distinguish between the two axis, but not (uniquely) any values in
between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1]
[4].
ABS_MT_POSITION_X
@ -98,8 +120,35 @@ ABS_MT_BLOB_ID
The BLOB_ID groups several packets together into one arbitrarily shaped
contact. This is a low-level anonymous grouping, and should not be confused
with the high-level contactID, explained below. Most kernel drivers will
not have this capability, and can safely omit the event.
with the high-level trackingID [5]. Most kernel drivers will not have blob
capability, and can safely omit the event.
ABS_MT_TRACKING_ID
The TRACKING_ID identifies an initiated contact throughout its life cycle
[5]. There are currently only a few devices that support it, so this event
should normally be omitted.
Event Computation
-----------------
The flora of different hardware unavoidably leads to some devices fitting
better to the MT protocol than others. To simplify and unify the mapping,
this section gives recipes for how to compute certain events.
For devices reporting contacts as rectangular shapes, signed orientation
cannot be obtained. Assuming X and Y are the lengths of the sides of the
touching rectangle, here is a simple formula that retains the most
information possible:
ABS_MT_TOUCH_MAJOR := max(X, Y)
ABS_MT_TOUCH_MINOR := min(X, Y)
ABS_MT_ORIENTATION := bool(X > Y)
The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that
the device can distinguish between a finger along the Y axis (0) and a
finger along the X axis (1).
Finger Tracking
@ -109,14 +158,18 @@ The kernel driver should generate an arbitrary enumeration of the set of
anonymous contacts currently on the surface. The order in which the packets
appear in the event stream is not important.
The process of finger tracking, i.e., to assign a unique contactID to each
The process of finger tracking, i.e., to assign a unique trackingID to each
initiated contact on the surface, is left to user space; preferably the
multi-touch X driver [3]. In that driver, the contactID stays the same and
multi-touch X driver [3]. In that driver, the trackingID stays the same and
unique until the contact vanishes (when the finger leaves the surface). The
problem of assigning a set of anonymous fingers to a set of identified
fingers is a euclidian bipartite matching problem at each event update, and
relies on a sufficiently rapid update rate.
There are a few devices that support trackingID in hardware. User space can
make use of these native identifiers to reduce bandwidth and cpu usage.
Notes
-----
@ -136,5 +189,7 @@ could be used to derive tilt.
time of writing (April 2009), the MT protocol is not yet merged, and the
prototype implements finger matching, basic mouse support and two-finger
scrolling. The project aims at improving the quality of current multi-touch
functionality available in the synaptics X driver, and in addition
functionality available in the Synaptics X driver, and in addition
implement more advanced gestures.
[4] See the section on event computation.
[5] See the section on finger tracking.

4
Documentation/kernel-parameters.txt
View File

@ -1535,6 +1535,10 @@ and is between 256 and 4096 characters. It is defined in the file
register save and restore. The kernel will only save
legacy floating-point registers on task switch.
noxsave [BUGS=X86] Disables x86 extended register state save
and restore using xsave. The kernel will fallback to
enabling legacy floating-point and sse state.
nohlt [BUGS=ARM,SH] Tells the kernel that the sleep(SH) or
wfi(ARM) instruction doesn't work correctly and not to
use it. This is also useful when using JTAG debugger.

1
Documentation/sound/alsa/HD-Audio-Models.txt
View File

@ -334,6 +334,7 @@ STAC9227/9228/9229/927x
ref-no-jd Reference board without HP/Mic jack detection
3stack D965 3stack
5stack D965 5stack + SPDIF
5stack-no-fp D965 5stack without front panel
dell-3stack Dell Dimension E520
dell-bios Fixes with Dell BIOS setup
auto BIOS setup (default)

5
Documentation/sound/alsa/Procfile.txt
View File

@ -104,6 +104,11 @@ card*/pcm*/xrun_debug
When this value is greater than 1, the driver will show the
stack trace additionally. This may help the debugging.
Since 2.6.30, this option also enables the hwptr check using
jiffies. This detects spontaneous invalid pointer callback
values, but can be lead to too much corrections for a (mostly
buggy) hardware that doesn't give smooth pointer updates.
card*/pcm*/sub*/info
The general information of this PCM sub-stream.

33
MAINTAINERS
View File

@ -434,7 +434,7 @@ F: arch/alpha/
AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
P: Thomas Dahlmann
M: thomas.dahlmann@amd.com
M: dahlmann.thomas@arcor.de
L: linux-geode@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: drivers/usb/gadget/amd5536udc.*
@ -624,6 +624,7 @@ M: paulius.zaleckas@teltonika.lt
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
T: git git://gitorious.org/linux-gemini/mainline.git
S: Maintained
F: arch/arm/mach-gemini/
ARM/EBSA110 MACHINE SUPPORT
P: Russell King
@ -650,6 +651,7 @@ P: Paulius Zaleckas
M: paulius.zaleckas@teltonika.lt
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
F: arch/arm/mm/*-fa*
ARM/FOOTBRIDGE ARCHITECTURE
P: Russell King
@ -1132,17 +1134,17 @@ F: fs/bfs/
F: include/linux/bfs_fs.h
BLACKFIN ARCHITECTURE
P: Bryan Wu
M: cooloney@kernel.org
P: Mike Frysinger
M: vapier@gentoo.org
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: arch/blackfin/
BLACKFIN EMAC DRIVER
P: Bryan Wu
M: cooloney@kernel.org
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
P: Michael Hennerich
M: michael.hennerich@analog.com
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/net/bfin_mac.*
@ -1150,7 +1152,7 @@ F: drivers/net/bfin_mac.*
BLACKFIN RTC DRIVER
P: Mike Frysinger
M: vapier.adi@gmail.com
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/rtc/rtc-bfin.c
@ -1158,7 +1160,7 @@ F: drivers/rtc/rtc-bfin.c
BLACKFIN SERIAL DRIVER
P: Sonic Zhang
M: sonic.zhang@analog.com
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/serial/bfin_5xx.c
@ -1166,7 +1168,7 @@ F: drivers/serial/bfin_5xx.c
BLACKFIN WATCHDOG DRIVER
P: Mike Frysinger
M: vapier.adi@gmail.com
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/watchdog/bfin_wdt.c
@ -1174,7 +1176,7 @@ F: drivers/watchdog/bfin_wdt.c
BLACKFIN I2C TWI DRIVER
P: Sonic Zhang
M: sonic.zhang@analog.com
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org/
S: Supported
F: drivers/i2c/busses/i2c-bfin-twi.c
@ -1540,6 +1542,13 @@ W: http://www.fi.muni.cz/~kas/cosa/
S: Maintained
F: drivers/net/wan/cosa*
CPMAC ETHERNET DRIVER
P: Florian Fainelli
M: florian@openwrt.org
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/cpmac.c
CPU FREQUENCY DRIVERS
P: Dave Jones
M: davej@redhat.com
@ -1971,8 +1980,8 @@ F: include/linux/edac.h
EDAC-E752X
P: Mark Gross
P: Doug Thompson
M: mark.gross@intel.com
P: Doug Thompson
M: dougthompson@xmission.com
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
@ -2249,7 +2258,7 @@ P: Li Yang
M: leoli@freescale.com
P: Zhang Wei
M: zw@zh-kernel.org
L: linuxppc-embedded@ozlabs.org
L: linuxppc-dev@ozlabs.org
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/dma/fsldma.*

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 30
EXTRAVERSION = -rc7
EXTRAVERSION = -rc8
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*

3
arch/arm/Kconfig
View File

@ -394,6 +394,7 @@ config ARCH_KIRKWOOD
select CPU_FEROCEON
select PCI
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
@ -415,6 +416,7 @@ config ARCH_MV78XX0
select CPU_FEROCEON
select PCI
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
@ -428,6 +430,7 @@ config ARCH_ORION5X
select CPU_FEROCEON
select PCI
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION

5
arch/arm/configs/kirkwood_defconfig
View File

@ -182,6 +182,7 @@ CONFIG_ARCH_KIRKWOOD=y
CONFIG_MACH_DB88F6281_BP=y
CONFIG_MACH_RD88F6192_NAS=y
CONFIG_MACH_RD88F6281=y
CONFIG_MACH_MV88F6281GTW_GE=y
CONFIG_MACH_SHEEVAPLUG=y
CONFIG_MACH_TS219=y
CONFIG_PLAT_ORION=y
@ -270,7 +271,9 @@ CONFIG_CMDLINE=""
#
# CPU Power Management
#
# CONFIG_CPU_IDLE is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Floating point emulation

3
arch/arm/configs/orion5x_defconfig
View File

@ -903,7 +903,8 @@ CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set

13
arch/arm/include/asm/assembler.h
View File

@ -114,3 +114,16 @@
.align 3; \
.long 9999b,9001f; \
.previous
/*
* SMP data memory barrier
*/
.macro smp_dmb
#ifdef CONFIG_SMP
#if __LINUX_ARM_ARCH__ >= 7
dmb
#elif __LINUX_ARM_ARCH__ == 6
mcr p15, 0, r0, c7, c10, 5 @ dmb
#endif
#endif
.endm

61
arch/arm/include/asm/atomic.h
View File

@ -44,11 +44,29 @@ static inline void atomic_set(atomic_t *v, int i)
: "cc");
}
static inline void atomic_add(int i, atomic_t *v)
{
unsigned long tmp;
int result;
__asm__ __volatile__("@ atomic_add\n"
"1: ldrex %0, [%2]\n"
" add %0, %0, %3\n"
" strex %1, %0, [%2]\n"
" teq %1, #0\n"
" bne 1b"
: "=&r" (result), "=&r" (tmp)
: "r" (&v->counter), "Ir" (i)
: "cc");
}
static inline int atomic_add_return(int i, atomic_t *v)
{
unsigned long tmp;
int result;
smp_mb();
__asm__ __volatile__("@ atomic_add_return\n"
"1: ldrex %0, [%2]\n"
" add %0, %0, %3\n"
@ -59,14 +77,34 @@ static inline int atomic_add_return(int i, atomic_t *v)
: "r" (&v->counter), "Ir" (i)
: "cc");
smp_mb();
return result;
}
static inline void atomic_sub(int i, atomic_t *v)
{
unsigned long tmp;
int result;
__asm__ __volatile__("@ atomic_sub\n"
"1: ldrex %0, [%2]\n"
" sub %0, %0, %3\n"
" strex %1, %0, [%2]\n"
" teq %1, #0\n"
" bne 1b"
: "=&r" (result), "=&r" (tmp)
: "r" (&v->counter), "Ir" (i)
: "cc");
}
static inline int atomic_sub_return(int i, atomic_t *v)
{
unsigned long tmp;
int result;
smp_mb();
__asm__ __volatile__("@ atomic_sub_return\n"
"1: ldrex %0, [%2]\n"
" sub %0, %0, %3\n"
@ -77,6 +115,8 @@ static inline int atomic_sub_return(int i, atomic_t *v)
: "r" (&v->counter), "Ir" (i)
: "cc");
smp_mb();
return result;
}
@ -84,6 +124,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
{
unsigned long oldval, res;
smp_mb();
do {
__asm__ __volatile__("@ atomic_cmpxchg\n"
"ldrex %1, [%2]\n"
@ -95,6 +137,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
: "cc");
} while (res);
smp_mb();
return oldval;
}
@ -135,6 +179,7 @@ static inline int atomic_add_return(int i, atomic_t *v)
return val;
}
#define atomic_add(i, v) (void) atomic_add_return(i, v)
static inline int atomic_sub_return(int i, atomic_t *v)
{
@ -148,6 +193,7 @@ static inline int atomic_sub_return(int i, atomic_t *v)
return val;
}
#define atomic_sub(i, v) (void) atomic_sub_return(i, v)
static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
{
@ -187,10 +233,8 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
}
#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
#define atomic_add(i, v) (void) atomic_add_return(i, v)
#define atomic_inc(v) (void) atomic_add_return(1, v)
#define atomic_sub(i, v) (void) atomic_sub_return(i, v)
#define atomic_dec(v) (void) atomic_sub_return(1, v)
#define atomic_inc(v) atomic_add(1, v)
#define atomic_dec(v) atomic_sub(1, v)
#define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0)
#define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0)
@ -200,11 +244,10 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
/* Atomic operations are already serializing on ARM */
#define smp_mb__before_atomic_dec() barrier()
#define smp_mb__after_atomic_dec() barrier()
#define smp_mb__before_atomic_inc() barrier()
#define smp_mb__after_atomic_inc() barrier()
#define smp_mb__before_atomic_dec() smp_mb()
#define smp_mb__after_atomic_dec() smp_mb()
#define smp_mb__before_atomic_inc() smp_mb()
#define smp_mb__after_atomic_inc() smp_mb()
#include <asm-generic/atomic.h>
#endif

3
arch/arm/include/asm/flat.h
View File

@ -5,9 +5,6 @@
#ifndef __ARM_FLAT_H__
#define __ARM_FLAT_H__
/* An odd number of words will be pushed after this alignment, so
deliberately misalign the value. */
#define flat_stack_align(sp) sp = (void *)(((unsigned long)(sp) - 4) | 4)
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))

1
arch/arm/include/asm/sizes.h
View File

@ -29,6 +29,7 @@
#define SZ_512 0x00000200
#define SZ_1K 0x00000400
#define SZ_2K 0x00000800
#define SZ_4K 0x00001000
#define SZ_8K 0x00002000
#define SZ_16K 0x00004000

176
arch/arm/include/asm/system.h
View File

@ -248,6 +248,8 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
unsigned int tmp;
#endif
smp_mb();
switch (size) {
#if __LINUX_ARM_ARCH__ >= 6
case 1:
@ -307,6 +309,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
__bad_xchg(ptr, size), ret = 0;
break;
}
smp_mb();
return ret;
}
@ -316,6 +319,12 @@ extern void enable_hlt(void);
#include <asm-generic/cmpxchg-local.h>
#if __LINUX_ARM_ARCH__ < 6
#ifdef CONFIG_SMP
#error "SMP is not supported on this platform"
#endif
/*
* cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
* them available.
@ -329,6 +338,173 @@ extern void enable_hlt(void);
#include <asm-generic/cmpxchg.h>
#endif
#else /* __LINUX_ARM_ARCH__ >= 6 */
extern void __bad_cmpxchg(volatile void *ptr, int size);
/*
* cmpxchg only support 32-bits operands on ARMv6.
*/
static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
unsigned long new, int size)
{
unsigned long oldval, res;
switch (size) {
#ifdef CONFIG_CPU_32v6K
case 1:
do {
asm volatile("@ __cmpxchg1\n"
" ldrexb %1, [%2]\n"
" mov %0, #0\n"
" teq %1, %3\n"
" strexbeq %0, %4, [%2]\n"
: "=&r" (res), "=&r" (oldval)
: "r" (ptr), "Ir" (old), "r" (new)
: "memory", "cc");
} while (res);
break;
case 2:
do {
asm volatile("@ __cmpxchg1\n"
" ldrexh %1, [%2]\n"
" mov %0, #0\n"
" teq %1, %3\n"
" strexheq %0, %4, [%2]\n"
: "=&r" (res), "=&r" (oldval)
: "r" (ptr), "Ir" (old), "r" (new)
: "memory", "cc");
} while (res);
break;
#endif /* CONFIG_CPU_32v6K */
case 4:
do {
asm volatile("@ __cmpxchg4\n"
" ldrex %1, [%2]\n"
" mov %0, #0\n"
" teq %1, %3\n"
" strexeq %0, %4, [%2]\n"
: "=&r" (res), "=&r" (oldval)
: "r" (ptr), "Ir" (old), "r" (new)
: "memory", "cc");
} while (res);
break;
default:
__bad_cmpxchg(ptr, size);
oldval = 0;
}
return oldval;
}
static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old,
unsigned long new, int size)
{
unsigned long ret;
smp_mb();
ret = __cmpxchg(ptr, old, new, size);
smp_mb();
return ret;
}
#define cmpxchg(ptr,o,n) \
((__typeof__(*(ptr)))__cmpxchg_mb((ptr), \
(unsigned long)(o), \
(unsigned long)(n), \
sizeof(*(ptr))))
static inline unsigned long __cmpxchg_local(volatile void *ptr,
unsigned long old,
unsigned long new, int size)
{
unsigned long ret;
switch (size) {
#ifndef CONFIG_CPU_32v6K
case 1:
case 2:
ret = __cmpxchg_local_generic(ptr, old, new, size);
break;
#endif /* !CONFIG_CPU_32v6K */
default:
ret = __cmpxchg(ptr, old, new, size);
}
return ret;
}
#define cmpxchg_local(ptr,o,n) \
((__typeof__(*(ptr)))__cmpxchg_local((ptr), \
(unsigned long)(o), \
(unsigned long)(n), \
sizeof(*(ptr))))
#ifdef CONFIG_CPU_32v6K
/*
* Note : ARMv7-M (currently unsupported by Linux) does not support
* ldrexd/strexd. If ARMv7-M is ever supported by the Linux kernel, it should
* not be allowed to use __cmpxchg64.
*/
static inline unsigned long long __cmpxchg64(volatile void *ptr,
unsigned long long old,
unsigned long long new)
{
register unsigned long long oldval asm("r0");
register unsigned long long __old asm("r2") = old;
register unsigned long long __new asm("r4") = new;
unsigned long res;
do {
asm volatile(
" @ __cmpxchg8\n"
" ldrexd %1, %H1, [%2]\n"
" mov %0, #0\n"
" teq %1, %3\n"
" teqeq %H1, %H3\n"
" strexdeq %0, %4, %H4, [%2]\n"
: "=&r" (res), "=&r" (oldval)
: "r" (ptr), "Ir" (__old), "r" (__new)
: "memory", "cc");
} while (res);
return oldval;
}
static inline unsigned long long __cmpxchg64_mb(volatile void *ptr,
unsigned long long old,
unsigned long long new)
{
unsigned long long ret;
smp_mb();
ret = __cmpxchg64(ptr, old, new);
smp_mb();
return ret;
}
#define cmpxchg64(ptr,o,n) \
((__typeof__(*(ptr)))__cmpxchg64_mb((ptr), \
(unsigned long long)(o), \
(unsigned long long)(n)))
#define cmpxchg64_local(ptr,o,n) \
((__typeof__(*(ptr)))__cmpxchg64((ptr), \
(unsigned long long)(o), \
(unsigned long long)(n)))
#else /* !CONFIG_CPU_32v6K */
#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
#endif /* CONFIG_CPU_32v6K */
#endif /* __LINUX_ARM_ARCH__ >= 6 */
#endif /* __ASSEMBLY__ */
#define arch_align_stack(x) (x)

9
arch/arm/kernel/elf.c
View File

@ -78,6 +78,15 @@ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
return 1;
if (cpu_architecture() < CPU_ARCH_ARMv6)
return 1;
#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
/*
* If we have support for OABI programs, we can never allow NX
* support - our signal syscall restart mechanism relies upon
* being able to execute code placed on the user stack.
*/
return 1;
#else
return 0;
#endif
}
EXPORT_SYMBOL(arm_elf_read_implies_exec);

5
arch/arm/kernel/entry-armv.S
View File

@ -815,10 +815,7 @@ __kuser_helper_start:
*/
__kuser_memory_barrier: @ 0xffff0fa0
#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_SMP)
mcr p15, 0, r0, c7, c10, 5 @ dmb
#endif
smp_dmb
usr_ret lr
.align 5

2
arch/arm/lib/bitops.h
View File

@ -18,12 +18,14 @@
mov r2, #1
add r1, r1, r0, lsr #3 @ Get byte offset
mov r3, r2, lsl r3 @ create mask
smp_dmb
1: ldrexb r2, [r1]
ands r0, r2, r3 @ save old value of bit
\instr r2, r2, r3 @ toggle bit
strexb ip, r2, [r1]
cmp ip, #0
bne 1b
smp_dmb
cmp r0, #0
movne r0, #1
2: mov pc, lr

3
arch/arm/mach-gemini/include/mach/hardware.h
View File

@ -15,10 +15,9 @@
/*
* Memory Map definitions
*/
/* FIXME: Does it really swap SRAM like this? */
#ifdef CONFIG_GEMINI_MEM_SWAP
# define GEMINI_DRAM_BASE 0x00000000
# define GEMINI_SRAM_BASE 0x20000000
# define GEMINI_SRAM_BASE 0x70000000
#else
# define GEMINI_SRAM_BASE 0x00000000
# define GEMINI_DRAM_BASE 0x10000000

6
arch/arm/mach-kirkwood/Kconfig
View File

@ -20,6 +20,12 @@ config MACH_RD88F6281
Say 'Y' here if you want your kernel to support the
Marvell RD-88F6281 Reference Board.
config MACH_MV88F6281GTW_GE
bool "Marvell 88F6281 GTW GE Board"
help
Say 'Y' here if you want your kernel to support the
Marvell 88F6281 GTW GE Board.
config MACH_SHEEVAPLUG
bool "Marvell SheevaPlug Reference Board"
help

3
arch/arm/mach-kirkwood/Makefile
View File

@ -3,5 +3,8 @@ obj-y += common.o addr-map.o irq.o pcie.o mpp.o
obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o
obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
obj-$(CONFIG_MACH_TS219) += ts219-setup.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o

14
arch/arm/mach-kirkwood/addr-map.c
View File

@ -20,6 +20,7 @@
*/
#define TARGET_DDR 0
#define TARGET_DEV_BUS 1
#define TARGET_SRAM 3
#define TARGET_PCIE 4
#define ATTR_DEV_SPI_ROM 0x1e
#define ATTR_DEV_BOOT 0x1d
@ -30,6 +31,7 @@
#define ATTR_DEV_CS0 0x3e
#define ATTR_PCIE_IO 0xe0
#define ATTR_PCIE_MEM 0xe8
#define ATTR_SRAM 0x01
/*
* Helpers to get DDR bank info
@ -48,7 +50,6 @@
struct mbus_dram_target_info kirkwood_mbus_dram_info;
static int __initdata win_alloc_count;
static int __init cpu_win_can_remap(int win)
{
@ -112,7 +113,11 @@ void __init kirkwood_setup_cpu_mbus(void)
setup_cpu_win(2, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
TARGET_DEV_BUS, ATTR_DEV_NAND, -1);
win_alloc_count = 3;
/*
* Setup window for SRAM.
*/
setup_cpu_win(3, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
TARGET_SRAM, ATTR_SRAM, -1);
/*
* Setup MBUS dram target info.
@ -140,8 +145,3 @@ void __init kirkwood_setup_cpu_mbus(void)
}
kirkwood_mbus_dram_info.num_cs = cs;
}
void __init kirkwood_setup_sram_win(u32 base, u32 size)
{
setup_cpu_win(win_alloc_count++, base, size, 0x03, 0x00, -1);
}

167
arch/arm/mach-kirkwood/common.c
View File

@ -16,6 +16,7 @@
#include <linux/mv643xx_eth.h>
#include <linux/mv643xx_i2c.h>
#include <linux/ata_platform.h>
#include <linux/mtd/nand.h>
#include <linux/spi/orion_spi.h>
#include <net/dsa.h>
#include <asm/page.h>
@ -29,6 +30,7 @@
#include <plat/mvsdio.h>
#include <plat/mv_xor.h>
#include <plat/orion_nand.h>
#include <plat/orion_wdt.h>
#include <plat/time.h>
#include "common.h"
@ -54,6 +56,13 @@ void __init kirkwood_map_io(void)
iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
}
/*
* Default clock control bits. Any bit _not_ set in this variable
* will be cleared from the hardware after platform devices have been
* registered. Some reserved bits must be set to 1.
*/
unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED;
/*****************************************************************************
* EHCI
@ -95,6 +104,7 @@ static struct platform_device kirkwood_ehci = {
void __init kirkwood_ehci_init(void)
{
kirkwood_clk_ctrl |= CGC_USB0;
platform_device_register(&kirkwood_ehci);
}
@ -144,10 +154,14 @@ static struct platform_device kirkwood_ge00 = {
.id = 0,
.num_resources = 1,
.resource = kirkwood_ge00_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
{
kirkwood_clk_ctrl |= CGC_GE0;
eth_data->shared = &kirkwood_ge00_shared;
kirkwood_ge00.dev.platform_data = eth_data;
@ -202,10 +216,14 @@ static struct platform_device kirkwood_ge01 = {
.id = 1,
.num_resources = 1,
.resource = kirkwood_ge01_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
{
kirkwood_clk_ctrl |= CGC_GE1;
eth_data->shared = &kirkwood_ge01_shared;
kirkwood_ge01.dev.platform_data = eth_data;
@ -251,6 +269,43 @@ void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq)
}
/*****************************************************************************
* NAND flash
****************************************************************************/
static struct resource kirkwood_nand_resource = {
.flags = IORESOURCE_MEM,
.start = KIRKWOOD_NAND_MEM_PHYS_BASE,
.end = KIRKWOOD_NAND_MEM_PHYS_BASE +
KIRKWOOD_NAND_MEM_SIZE - 1,
};
static struct orion_nand_data kirkwood_nand_data = {
.cle = 0,
.ale = 1,
.width = 8,
};
static struct platform_device kirkwood_nand_flash = {
.name = "orion_nand",
.id = -1,
.dev = {
.platform_data = &kirkwood_nand_data,
},
.resource = &kirkwood_nand_resource,
.num_resources = 1,
};
void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts,
int chip_delay)
{
kirkwood_clk_ctrl |= CGC_RUNIT;
kirkwood_nand_data.parts = parts;
kirkwood_nand_data.nr_parts = nr_parts;
kirkwood_nand_data.chip_delay = chip_delay;
platform_device_register(&kirkwood_nand_flash);
}
/*****************************************************************************
* SoC RTC
****************************************************************************/
@ -295,6 +350,9 @@ static struct platform_device kirkwood_sata = {
void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
{
kirkwood_clk_ctrl |= CGC_SATA0;
if (sata_data->n_ports > 1)
kirkwood_clk_ctrl |= CGC_SATA1;
sata_data->dram = &kirkwood_mbus_dram_info;
kirkwood_sata.dev.platform_data = sata_data;
platform_device_register(&kirkwood_sata);
@ -340,6 +398,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
else
mvsdio_data->clock = 200000000;
mvsdio_data->dram = &kirkwood_mbus_dram_info;
kirkwood_clk_ctrl |= CGC_SDIO;
kirkwood_sdio.dev.platform_data = mvsdio_data;
platform_device_register(&kirkwood_sdio);
}
@ -371,6 +430,7 @@ static struct platform_device kirkwood_spi = {
void __init kirkwood_spi_init()
{
kirkwood_clk_ctrl |= CGC_RUNIT;
platform_device_register(&kirkwood_spi);
}
@ -386,12 +446,10 @@ static struct mv64xxx_i2c_pdata kirkwood_i2c_pdata = {
static struct resource kirkwood_i2c_resources[] = {
{
.name = "i2c",
.start = I2C_PHYS_BASE,
.end = I2C_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
.name = "i2c",
.start = IRQ_KIRKWOOD_TWSI,
.end = IRQ_KIRKWOOD_TWSI,
.flags = IORESOURCE_IRQ,
@ -502,6 +560,43 @@ void __init kirkwood_uart1_init(void)
}
/*****************************************************************************
* Cryptographic Engines and Security Accelerator (CESA)
****************************************************************************/
static struct resource kirkwood_crypto_res[] = {
{
.name = "regs",
.start = CRYPTO_PHYS_BASE,
.end = CRYPTO_PHYS_BASE + 0xffff,
.flags = IORESOURCE_MEM,
}, {
.name = "sram",
.start = KIRKWOOD_SRAM_PHYS_BASE,
.end = KIRKWOOD_SRAM_PHYS_BASE + KIRKWOOD_SRAM_SIZE - 1,
.flags = IORESOURCE_MEM,
}, {
.name = "crypto interrupt",
.start = IRQ_KIRKWOOD_CRYPTO,
.end = IRQ_KIRKWOOD_CRYPTO,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device kirkwood_crypto_device = {
.name = "mv_crypto",
.id = -1,
.num_resources = ARRAY_SIZE(kirkwood_crypto_res),
.resource = kirkwood_crypto_res,
};
void __init kirkwood_crypto_init(void)
{
kirkwood_clk_ctrl |= CGC_CRYPTO;
platform_device_register(&kirkwood_crypto_device);
}
/*****************************************************************************
* XOR
****************************************************************************/
@ -593,6 +688,7 @@ static struct platform_device kirkwood_xor01_channel = {
static void __init kirkwood_xor0_init(void)
{
kirkwood_clk_ctrl |= CGC_XOR0;
platform_device_register(&kirkwood_xor0_shared);
/*
@ -691,6 +787,7 @@ static struct platform_device kirkwood_xor11_channel = {
static void __init kirkwood_xor1_init(void)
{
kirkwood_clk_ctrl |= CGC_XOR1;
platform_device_register(&kirkwood_xor1_shared);
/*
@ -708,6 +805,29 @@ static void __init kirkwood_xor1_init(void)
}
/*****************************************************************************
* Watchdog
****************************************************************************/
static struct orion_wdt_platform_data kirkwood_wdt_data = {
.tclk = 0,
};
static struct platform_device kirkwood_wdt_device = {
.name = "orion_wdt",
.id = -1,
.dev = {
.platform_data = &kirkwood_wdt_data,
},
.num_resources = 0,
};
static void __init kirkwood_wdt_init(void)
{
kirkwood_wdt_data.tclk = kirkwood_tclk;
platform_device_register(&kirkwood_wdt_device);
}
/*****************************************************************************
* Time handling
****************************************************************************/
@ -800,6 +920,49 @@ void __init kirkwood_init(void)
/* internal devices that every board has */
kirkwood_rtc_init();
kirkwood_wdt_init();
kirkwood_xor0_init();
kirkwood_xor1_init();
kirkwood_crypto_init();
}
static int __init kirkwood_clock_gate(void)
{
unsigned int curr = readl(CLOCK_GATING_CTRL);
printk(KERN_DEBUG "Gating clock of unused units\n");
printk(KERN_DEBUG "before: 0x%08x\n", curr);
/* Make sure those units are accessible */
writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0, CLOCK_GATING_CTRL);
/* For SATA: first shutdown the phy */
if (!(kirkwood_clk_ctrl & CGC_SATA0)) {
/* Disable PLL and IVREF */
writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2);
/* Disable PHY */
writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL);
}
if (!(kirkwood_clk_ctrl & CGC_SATA1)) {
/* Disable PLL and IVREF */
writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2);
/* Disable PHY */
writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL);
}
/* For PCIe: first shutdown the phy */
if (!(kirkwood_clk_ctrl & CGC_PEX0)) {
writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL);
while (1)
if (readl(PCIE_STATUS) & 0x1)
break;
writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
}
/* Now gate clock the required units */
writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL);
printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL));
return 0;
}
late_initcall(kirkwood_clock_gate);

4
arch/arm/mach-kirkwood/common.h
View File

@ -15,6 +15,7 @@ struct dsa_platform_data;
struct mv643xx_eth_platform_data;
struct mv_sata_platform_data;
struct mvsdio_platform_data;
struct mtd_partition;
/*
* Basic Kirkwood init functions used early by machine-setup.
@ -25,7 +26,6 @@ void kirkwood_init_irq(void);
extern struct mbus_dram_target_info kirkwood_mbus_dram_info;
void kirkwood_setup_cpu_mbus(void);
void kirkwood_setup_sram_win(u32 base, u32 size);
void kirkwood_pcie_id(u32 *dev, u32 *rev);
@ -40,9 +40,11 @@ void kirkwood_spi_init(void);
void kirkwood_i2c_init(void);
void kirkwood_uart0_init(void);
void kirkwood_uart1_init(void);
void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
extern int kirkwood_tclk;
extern struct sys_timer kirkwood_timer;
#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
#endif

96
arch/arm/mach-kirkwood/cpuidle.c Normal file
View File

@ -0,0 +1,96 @@
/*
* arch/arm/mach-kirkwood/cpuidle.c
*
* CPU idle Marvell Kirkwood SoCs
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
* The cpu idle uses wait-for-interrupt and DDR self refresh in order
* to implement two idle states -
* #1 wait-for-interrupt
* #2 wait-for-interrupt and DDR self refresh
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/cpuidle.h>
#include <linux/io.h>
#include <asm/proc-fns.h>
#include <mach/kirkwood.h>
#define KIRKWOOD_MAX_STATES 2
static struct cpuidle_driver kirkwood_idle_driver = {
.name = "kirkwood_idle",
.owner = THIS_MODULE,
};
static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device);
/* Actual code that puts the SoC in different idle states */
static int kirkwood_enter_idle(struct cpuidle_device *dev,
struct cpuidle_state *state)
{
struct timeval before, after;
int idle_time;
local_irq_disable();
do_gettimeofday(&before);
if (state == &dev->states[0])
/* Wait for interrupt state */
cpu_do_idle();
else if (state == &dev->states[1]) {
/*
* Following write will put DDR in self refresh.
* Note that we have 256 cycles before DDR puts it
* self in self-refresh, so the wait-for-interrupt
* call afterwards won't get the DDR from self refresh
* mode.
*/
writel(0x7, DDR_OPERATION_BASE);
cpu_do_idle();
}
do_gettimeofday(&after);
local_irq_enable();
idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
(after.tv_usec - before.tv_usec);
return idle_time;
}
/* Initialize CPU idle by registering the idle states */
static int kirkwood_init_cpuidle(void)
{
struct cpuidle_device *device;
cpuidle_register_driver(&kirkwood_idle_driver);
device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id());
device->state_count = KIRKWOOD_MAX_STATES;
/* Wait for interrupt state */
device->states[0].enter = kirkwood_enter_idle;
device->states[0].exit_latency = 1;
device->states[0].target_residency = 10000;
device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
strcpy(device->states[0].name, "WFI");
strcpy(device->states[0].desc, "Wait for interrupt");
/* Wait for interrupt and DDR self refresh state */
device->states[1].enter = kirkwood_enter_idle;
device->states[1].exit_latency = 10;
device->states[1].target_residency = 10000;
device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
strcpy(device->states[1].name, "DDR SR");
strcpy(device->states[1].desc, "WFI and DDR Self Refresh");
if (cpuidle_register_device(device)) {
printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n");
return -EIO;
}
return 0;
}
device_initcall(kirkwood_init_cpuidle);

31
arch/arm/mach-kirkwood/db88f6281-bp-setup.c
View File

@ -11,14 +11,12 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include <plat/orion_nand.h>
#include <plat/mvsdio.h>
#include "common.h"
#include "mpp.h"
@ -39,32 +37,6 @@ static struct mtd_partition db88f6281_nand_parts[] = {
},
};
static struct resource db88f6281_nand_resource = {
.flags = IORESOURCE_MEM,
.start = KIRKWOOD_NAND_MEM_PHYS_BASE,
.end = KIRKWOOD_NAND_MEM_PHYS_BASE +
KIRKWOOD_NAND_MEM_SIZE - 1,
};
static struct orion_nand_data db88f6281_nand_data = {
.parts = db88f6281_nand_parts,
.nr_parts = ARRAY_SIZE(db88f6281_nand_parts),
.cle = 0,
.ale = 1,
.width = 8,
.chip_delay = 25,
};
static struct platform_device db88f6281_nand_flash = {
.name = "orion_nand",
.id = -1,
.dev = {
.platform_data = &db88f6281_nand_data,
},
.resource = &db88f6281_nand_resource,
.num_resources = 1,
};
static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
@ -92,13 +64,12 @@ static void __init db88f6281_init(void)
kirkwood_init();
kirkwood_mpp_conf(db88f6281_mpp_config);
kirkwood_nand_init(ARRAY_AND_SIZE(db88f6281_nand_parts), 25);
kirkwood_ehci_init();
kirkwood_ge00_init(&db88f6281_ge00_data);
kirkwood_sata_init(&db88f6281_sata_data);
kirkwood_uart0_init();
kirkwood_sdio_init(&db88f6281_mvsdio_data);
platform_device_register(&db88f6281_nand_flash);
}
static int __init db88f6281_pci_init(void)

21
arch/arm/mach-kirkwood/include/mach/bridge-regs.h
View File

@ -17,12 +17,15 @@
#define CPU_RESET 0x00000002
#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
#define WDT_RESET_OUT_EN 0x00000002
#define SOFT_RESET_OUT_EN 0x00000004
#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
#define SOFT_RESET 0x00000001
#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
#define WDT_INT_REQ 0x0008
#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
#define BRIDGE_INT_TIMER0 0x0002
#define BRIDGE_INT_TIMER1 0x0004
@ -39,4 +42,22 @@
#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
#define L2_WRITETHROUGH 0x00000010
#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE | 0x11c)
#define CGC_GE0 (1 << 0)
#define CGC_PEX0 (1 << 2)
#define CGC_USB0 (1 << 3)
#define CGC_SDIO (1 << 4)
#define CGC_TSU (1 << 5)
#define CGC_DUNIT (1 << 6)
#define CGC_RUNIT (1 << 7)
#define CGC_XOR0 (1 << 8)
#define CGC_AUDIO (1 << 9)
#define CGC_SATA0 (1 << 14)
#define CGC_SATA1 (1 << 15)
#define CGC_XOR1 (1 << 16)
#define CGC_CRYPTO (1 << 17)
#define CGC_GE1 (1 << 19)
#define CGC_TDM (1 << 20)
#define CGC_RESERVED ((1 << 18) | (0x6 << 21))
#endif

25
arch/arm/mach-kirkwood/include/mach/io.h
View File

@ -19,6 +19,31 @@ static inline void __iomem *__io(unsigned long addr)
+ KIRKWOOD_PCIE_IO_VIRT_BASE);
}
static inline void __iomem *
__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
{
void __iomem *retval;
unsigned long offs = paddr - KIRKWOOD_REGS_PHYS_BASE;
if (mtype == MT_DEVICE && size && offs < KIRKWOOD_REGS_SIZE &&
size <= KIRKWOOD_REGS_SIZE && offs + size <= KIRKWOOD_REGS_SIZE) {
retval = (void __iomem *)KIRKWOOD_REGS_VIRT_BASE + offs;
} else {
retval = __arm_ioremap(paddr, size, mtype);
}
return retval;
}
static inline void
__arch_iounmap(void __iomem *addr)
{
if (addr < (void __iomem *)KIRKWOOD_REGS_VIRT_BASE ||
addr >= (void __iomem *)(KIRKWOOD_REGS_VIRT_BASE + KIRKWOOD_REGS_SIZE))
__iounmap(addr);
}
#define __arch_ioremap(p, s, m) __arch_ioremap(p, s, m)
#define __arch_iounmap(a) __arch_iounmap(a)
#define __io(a) __io(a)
#define __mem_pci(a) (a)

18
arch/arm/mach-kirkwood/include/mach/kirkwood.h
View File

@ -20,16 +20,18 @@
* f1000000 on-chip peripheral registers
* f2000000 PCIe I/O space
* f3000000 NAND controller address window
* f4000000 Security Accelerator SRAM
*
* virt phys size
* fee00000 f1000000 1M on-chip peripheral registers
* fef00000 f2000000 1M PCIe I/O space
*/
#define KIRKWOOD_SRAM_PHYS_BASE 0xf4000000
#define KIRKWOOD_SRAM_SIZE SZ_2K
#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf3000000
#define KIRKWOOD_NAND_MEM_SIZE SZ_64K /* 1K is sufficient, but 64K
* is the minimal window size
*/
#define KIRKWOOD_NAND_MEM_SIZE SZ_1K
#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000
#define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfef00000
@ -48,6 +50,7 @@
*/
#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000)
#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500)
#define DDR_OPERATION_BASE (DDR_VIRT_BASE | 0x1418)
#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000)
#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000)
@ -63,7 +66,11 @@
#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000)
#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000)
#define PCIE_LINK_CTRL (PCIE_VIRT_BASE | 0x70)
#define PCIE_STATUS (PCIE_VIRT_BASE | 0x1a04)
#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000)
@ -80,6 +87,11 @@
#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000)
#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000)
#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x80000)
#define SATA0_IF_CTRL (SATA_VIRT_BASE | 0x2050)
#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE | 0x2330)
#define SATA1_IF_CTRL (SATA_VIRT_BASE | 0x4050)
#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE | 0x4330)
#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000)

3
arch/arm/mach-kirkwood/mpp.c
View File

@ -48,6 +48,9 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list)
if (!variant_mask)
return;
/* Initialize gpiolib. */
orion_gpio_init();
printk(KERN_DEBUG "initial MPP regs:");
for (i = 0; i < MPP_NR_REGS; i++) {
mpp_ctrl[i] = readl(MPP_CTRL(i));

173
arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c Normal file
View File

@ -0,0 +1,173 @@
/*
* arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
*
* Marvell 88F6281 GTW GE Board Setup
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
#include <linux/timer.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <linux/spi/orion_spi.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/kirkwood.h>
#include "common.h"
#include "mpp.h"
static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_NONE,
.speed = SPEED_1000,
.duplex = DUPLEX_FULL,
};
static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
.port_names[0] = "lan1",
.port_names[1] = "lan2",
.port_names[2] = "lan3",
.port_names[3] = "lan4",
.port_names[4] = "wan",
.port_names[5] = "cpu",
};
static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
.nr_chips = 1,
.chip = &mv88f6281gtw_ge_switch_chip_data,
};
static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = {
.type = "mx25l12805d",
};
static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = {
{
.modalias = "m25p80",
.platform_data = &mv88f6281gtw_ge_spi_slave_data,
.irq = -1,
.max_speed_hz = 50000000,
.bus_num = 0,
.chip_select = 0,
},
};
static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = {
{
.code = KEY_RESTART,
.gpio = 47,
.desc = "SWR Button",
.active_low = 1,
}, {
.code = KEY_F1,
.gpio = 46,
.desc = "WPS Button(F1)",
.active_low = 1,
},
};
static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = {
.buttons = mv88f6281gtw_ge_button_pins,
.nbuttons = ARRAY_SIZE(mv88f6281gtw_ge_button_pins),
};
static struct platform_device mv88f6281gtw_ge_buttons = {
.name = "gpio-keys",
.id = -1,
.num_resources = 0,
.dev = {
.platform_data = &mv88f6281gtw_ge_button_data,
},
};
static struct gpio_led mv88f6281gtw_ge_led_pins[] = {
{
.name = "gtw:green:Status",
.gpio = 20,
.active_low = 0,
}, {
.name = "gtw:red:Status",
.gpio = 21,
.active_low = 0,
}, {
.name = "gtw:green:USB",
.gpio = 12,
.active_low = 0,
},
};
static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = {
.leds = mv88f6281gtw_ge_led_pins,
.num_leds = ARRAY_SIZE(mv88f6281gtw_ge_led_pins),
};
static struct platform_device mv88f6281gtw_ge_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &mv88f6281gtw_ge_led_data,
},
};
static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = {
MPP12_GPO, /* Status#_USB pin */
MPP20_GPIO, /* Status#_GLED pin */
MPP21_GPIO, /* Status#_RLED pin */
MPP46_GPIO, /* WPS_Switch pin */
MPP47_GPIO, /* SW_Init pin */
0
};
static void __init mv88f6281gtw_ge_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_init();
kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config);
kirkwood_ehci_init();
kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
spi_register_board_info(mv88f6281gtw_ge_spi_slave_info,
ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info));
kirkwood_spi_init();
kirkwood_uart0_init();
platform_device_register(&mv88f6281gtw_ge_leds);
platform_device_register(&mv88f6281gtw_ge_buttons);
}
static int __init mv88f6281gtw_ge_pci_init(void)
{
if (machine_is_mv88f6281gtw_ge())
kirkwood_pcie_init();
return 0;
}
subsys_initcall(mv88f6281gtw_ge_pci_init);
MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
.io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.init_machine = mv88f6281gtw_ge_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END

4
arch/arm/mach-kirkwood/pcie.c
View File

@ -14,6 +14,7 @@
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <plat/pcie.h>
#include <mach/bridge-regs.h>
#include "common.h"
@ -95,6 +96,7 @@ static struct pci_ops pcie_ops = {
static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
{
struct resource *res;
extern unsigned int kirkwood_clk_ctrl;
/*
* Generic PCIe unit setup.
@ -133,6 +135,8 @@ static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
sys->resource[2] = NULL;
sys->io_offset = 0;
kirkwood_clk_ctrl |= CGC_PEX0;
return 1;
}

2
arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
View File

@ -11,8 +11,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/spi/flash.h>

31
arch/arm/mach-kirkwood/rd88f6281-setup.c
View File

@ -12,7 +12,6 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
@ -22,7 +21,6 @@
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include <plat/mvsdio.h>
#include <plat/orion_nand.h>
#include "common.h"
#include "mpp.h"
@ -42,32 +40,6 @@ static struct mtd_partition rd88f6281_nand_parts[] = {
},
};
static struct resource rd88f6281_nand_resource = {
.flags = IORESOURCE_MEM,
.start = KIRKWOOD_NAND_MEM_PHYS_BASE,
.end = KIRKWOOD_NAND_MEM_PHYS_BASE +
KIRKWOOD_NAND_MEM_SIZE - 1,
};
static struct orion_nand_data rd88f6281_nand_data = {
.parts = rd88f6281_nand_parts,
.nr_parts = ARRAY_SIZE(rd88f6281_nand_parts),
.cle = 0,
.ale = 1,
.width = 8,
.chip_delay = 25,
};
static struct platform_device rd88f6281_nand_flash = {
.name = "orion_nand",
.id = -1,
.dev = {
.platform_data = &rd88f6281_nand_data,
},
.resource = &rd88f6281_nand_resource,
.num_resources = 1,
};
static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_NONE,
.speed = SPEED_1000,
@ -114,6 +86,7 @@ static void __init rd88f6281_init(void)
kirkwood_init();
kirkwood_mpp_conf(rd88f6281_mpp_config);
kirkwood_nand_init(ARRAY_AND_SIZE(rd88f6281_nand_parts), 25);
kirkwood_ehci_init();
kirkwood_ge00_init(&rd88f6281_ge00_data);
@ -129,8 +102,6 @@ static void __init rd88f6281_init(void)
kirkwood_sata_init(&rd88f6281_sata_data);
kirkwood_sdio_init(&rd88f6281_mvsdio_data);
kirkwood_uart0_init();
platform_device_register(&rd88f6281_nand_flash);
}
static int __init rd88f6281_pci_init(void)

32
arch/arm/mach-kirkwood/sheevaplug-setup.c
View File

@ -11,7 +11,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
@ -20,7 +19,6 @@
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include <plat/mvsdio.h>
#include <plat/orion_nand.h>
#include "common.h"
#include "mpp.h"
@ -40,38 +38,12 @@ static struct mtd_partition sheevaplug_nand_parts[] = {
},
};
static struct resource sheevaplug_nand_resource = {
.flags = IORESOURCE_MEM,
.start = KIRKWOOD_NAND_MEM_PHYS_BASE,
.end = KIRKWOOD_NAND_MEM_PHYS_BASE +
KIRKWOOD_NAND_MEM_SIZE - 1,
};
static struct orion_nand_data sheevaplug_nand_data = {
.parts = sheevaplug_nand_parts,
.nr_parts = ARRAY_SIZE(sheevaplug_nand_parts),
.cle = 0,
.ale = 1,
.width = 8,
.chip_delay = 25,
};
static struct platform_device sheevaplug_nand_flash = {
.name = "orion_nand",
.id = -1,
.dev = {
.platform_data = &sheevaplug_nand_data,
},
.resource = &sheevaplug_nand_resource,
.num_resources = 1,
};
static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
// unfortunately the CD signal has not been connected */
/* unfortunately the CD signal has not been connected */
};
static struct gpio_led sheevaplug_led_pins[] = {
@ -111,6 +83,7 @@ static void __init sheevaplug_init(void)
kirkwood_mpp_conf(sheevaplug_mpp_config);
kirkwood_uart0_init();
kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
if (gpio_request(29, "USB Power Enable") != 0 ||
gpio_direction_output(29, 1) != 0)
@ -120,7 +93,6 @@ static void __init sheevaplug_init(void)
kirkwood_ge00_init(&sheevaplug_ge00_data);
kirkwood_sdio_init(&sheevaplug_mvsdio_data);
platform_device_register(&sheevaplug_nand_flash);
platform_device_register(&sheevaplug_leds);
}

6
arch/arm/mach-kirkwood/ts219-setup.c
View File

@ -142,6 +142,8 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
MPP1_SPI_MOSI,
MPP2_SPI_SCK,
MPP3_SPI_MISO,
MPP4_SATA1_ACTn,
MPP5_SATA0_ACTn,
MPP8_TW_SDA,
MPP9_TW_SCK,
MPP10_UART0_TXD,
@ -150,10 +152,6 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
MPP14_UART1_RXD, /* PIC controller */
MPP15_GPIO, /* USB Copy button */
MPP16_GPIO, /* Reset button */
MPP20_SATA1_ACTn,
MPP21_SATA0_ACTn,
MPP22_SATA1_PRESENTn,
MPP23_SATA0_PRESENTn,
0
};

6
arch/arm/mach-loki/common.c
View File

@ -82,6 +82,9 @@ static struct platform_device loki_ge0 = {
.id = 0,
.num_resources = 1,
.resource = loki_ge0_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data)
@ -136,6 +139,9 @@ static struct platform_device loki_ge1 = {
.id = 1,
.num_resources = 1,
.resource = loki_ge1_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data)

5
arch/arm/mach-mmp/include/mach/mfp-pxa168.h
View File

@ -3,6 +3,11 @@
#include <mach/mfp.h>
#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
#define MFP_DRIVE_SLOW (0x1 << 13)
#define MFP_DRIVE_MEDIUM (0x2 << 13)
#define MFP_DRIVE_FAST (0x3 << 13)
/* GPIO */
#define GPIO0_GPIO MFP_CFG(GPIO0, AF5)
#define GPIO1_GPIO MFP_CFG(GPIO1, AF5)

5
arch/arm/mach-mmp/include/mach/mfp-pxa910.h
View File

@ -3,6 +3,11 @@
#include <mach/mfp.h>
#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
#define MFP_DRIVE_SLOW (0x2 << 13)
#define MFP_DRIVE_MEDIUM (0x4 << 13)
#define MFP_DRIVE_FAST (0x8 << 13)
/* UART2 */
#define GPIO47_UART2_RXD MFP_CFG(GPIO47, AF6)
#define GPIO48_UART2_TXD MFP_CFG(GPIO48, AF6)

9
arch/arm/mach-mmp/include/mach/mfp.h
View File

@ -12,16 +12,13 @@
* possible, we make the following compromise:
*
* 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT)
* 2. DRIVE strength definitions redefined to include the reserved bit10
* 2. DRIVE strength definitions redefined to include the reserved bit
* - the reserved bit differs between pxa168 and pxa910, and the
* MFP_DRIVE_* macros are individually defined in mfp-pxa{168,910}.h
* 3. Override MFP_CFG() and MFP_CFG_DRV()
* 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X()
*/
#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
#define MFP_DRIVE_SLOW (0x2 << 13)
#define MFP_DRIVE_MEDIUM (0x4 << 13)
#define MFP_DRIVE_FAST (0x8 << 13)
#undef MFP_CFG
#undef MFP_CFG_DRV
#undef MFP_CFG_LPM

2
arch/arm/mach-mmp/time.c
View File

@ -136,7 +136,7 @@ static struct clock_event_device ckevt = {
.set_mode = timer_set_mode,
};
static cycle_t clksrc_read(void)
static cycle_t clksrc_read(struct clocksource *cs)
{
return timer_read();
}

16
arch/arm/mach-mv78xx0/common.c
View File

@ -321,6 +321,9 @@ static struct platform_device mv78xx0_ge00 = {
.id = 0,
.num_resources = 1,
.resource = mv78xx0_ge00_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
@ -375,6 +378,9 @@ static struct platform_device mv78xx0_ge01 = {
.id = 1,
.num_resources = 1,
.resource = mv78xx0_ge01_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
@ -429,6 +435,9 @@ static struct platform_device mv78xx0_ge10 = {
.id = 2,
.num_resources = 1,
.resource = mv78xx0_ge10_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
@ -496,6 +505,9 @@ static struct platform_device mv78xx0_ge11 = {
.id = 3,
.num_resources = 1,
.resource = mv78xx0_ge11_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
@ -532,12 +544,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_0_pdata = {
static struct resource mv78xx0_i2c_0_resources[] = {
{
.name = "i2c 0 base",
.start = I2C_0_PHYS_BASE,
.end = I2C_0_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
.name = "i2c 0 irq",
.start = IRQ_MV78XX0_I2C_0,
.end = IRQ_MV78XX0_I2C_0,
.flags = IORESOURCE_IRQ,
@ -567,12 +577,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_1_pdata = {
static struct resource mv78xx0_i2c_1_resources[] = {
{
.name = "i2c 1 base",
.start = I2C_1_PHYS_BASE,
.end = I2C_1_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
.name = "i2c 1 irq",
.start = IRQ_MV78XX0_I2C_1,
.end = IRQ_MV78XX0_I2C_1,
.flags = IORESOURCE_IRQ,

3
arch/arm/mach-mv78xx0/irq.c
View File

@ -28,6 +28,9 @@ void __init mv78xx0_init_irq(void)
{
int i;
/* Initialize gpiolib. */
orion_gpio_init();
orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF));

14
arch/arm/mach-orion5x/addr-map.c
View File

@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
#include <linux/errno.h>
#include <mach/hardware.h>
#include "common.h"
@ -44,6 +45,7 @@
#define TARGET_DEV_BUS 1
#define TARGET_PCI 3
#define TARGET_PCIE 4
#define TARGET_SRAM 9
#define ATTR_PCIE_MEM 0x59
#define ATTR_PCIE_IO 0x51
#define ATTR_PCIE_WA 0x79
@ -53,6 +55,7 @@
#define ATTR_DEV_CS1 0x1d
#define ATTR_DEV_CS2 0x1b
#define ATTR_DEV_BOOT 0xf
#define ATTR_SRAM 0x0
/*
* Helpers to get DDR bank info
@ -87,13 +90,13 @@ static int __init orion5x_cpu_win_can_remap(int win)
return 0;
}
static void __init setup_cpu_win(int win, u32 base, u32 size,
static int __init setup_cpu_win(int win, u32 base, u32 size,
u8 target, u8 attr, int remap)
{
if (win >= 8) {
printk(KERN_ERR "setup_cpu_win: trying to allocate "
"window %d\n", win);
return;
return -ENOSPC;
}
writel(base & 0xffff0000, CPU_WIN_BASE(win));
@ -107,6 +110,7 @@ static void __init setup_cpu_win(int win, u32 base, u32 size,
writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win));
writel(0, CPU_WIN_REMAP_HI(win));
}
return 0;
}
void __init orion5x_setup_cpu_mbus_bridge(void)
@ -193,3 +197,9 @@ void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
setup_cpu_win(win_alloc_count++, base, size,
TARGET_PCIE, ATTR_PCIE_WA, -1);
}
int __init orion5x_setup_sram_win(void)
{
return setup_cpu_win(win_alloc_count, ORION5X_SRAM_PHYS_BASE,
ORION5X_SRAM_SIZE, TARGET_SRAM, ATTR_SRAM, -1);
}

47
arch/arm/mach-orion5x/common.c
View File

@ -31,7 +31,7 @@
#include <plat/ehci-orion.h>
#include <plat/mv_xor.h>
#include <plat/orion_nand.h>
#include <plat/orion5x_wdt.h>
#include <plat/orion_wdt.h>
#include <plat/time.h>
#include "common.h"
@ -188,6 +188,9 @@ static struct platform_device orion5x_eth = {
.id = 0,
.num_resources = 1,
.resource = orion5x_eth_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
@ -248,12 +251,10 @@ static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = {
static struct resource orion5x_i2c_resources[] = {
{
.name = "i2c base",
.start = I2C_PHYS_BASE,
.end = I2C_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
.name = "i2c irq",
.start = IRQ_ORION5X_I2C,
.end = IRQ_ORION5X_I2C,
.flags = IORESOURCE_IRQ,
@ -535,16 +536,52 @@ void __init orion5x_xor_init(void)
platform_device_register(&orion5x_xor1_channel);
}
static struct resource orion5x_crypto_res[] = {
{
.name = "regs",
.start = ORION5X_CRYPTO_PHYS_BASE,
.end = ORION5X_CRYPTO_PHYS_BASE + 0xffff,
.flags = IORESOURCE_MEM,
}, {
.name = "sram",
.start = ORION5X_SRAM_PHYS_BASE,
.end = ORION5X_SRAM_PHYS_BASE + SZ_8K - 1,
.flags = IORESOURCE_MEM,
}, {
.name = "crypto interrupt",
.start = IRQ_ORION5X_CESA,
.end = IRQ_ORION5X_CESA,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device orion5x_crypto_device = {
.name = "mv_crypto",
.id = -1,
.num_resources = ARRAY_SIZE(orion5x_crypto_res),
.resource = orion5x_crypto_res,
};
int __init orion5x_crypto_init(void)
{
int ret;
ret = orion5x_setup_sram_win();
if (ret)
return ret;
return platform_device_register(&orion5x_crypto_device);
}
/*****************************************************************************
* Watchdog
****************************************************************************/
static struct orion5x_wdt_platform_data orion5x_wdt_data = {
static struct orion_wdt_platform_data orion5x_wdt_data = {
.tclk = 0,
};
static struct platform_device orion5x_wdt_device = {
.name = "orion5x_wdt",
.name = "orion_wdt",
.id = -1,
.dev = {
.platform_data = &orion5x_wdt_data,

2
arch/arm/mach-orion5x/common.h
View File

@ -26,6 +26,7 @@ void orion5x_setup_dev0_win(u32 base, u32 size);
void orion5x_setup_dev1_win(u32 base, u32 size);
void orion5x_setup_dev2_win(u32 base, u32 size);
void orion5x_setup_pcie_wa_win(u32 base, u32 size);
int orion5x_setup_sram_win(void);
void orion5x_ehci0_init(void);
void orion5x_ehci1_init(void);
@ -37,6 +38,7 @@ void orion5x_spi_init(void);
void orion5x_uart0_init(void);
void orion5x_uart1_init(void);
void orion5x_xor_init(void);
int orion5x_crypto_init(void);
/*
* PCIe/PCI functions.

4
arch/arm/mach-orion5x/include/mach/bridge-regs.h
View File

@ -17,8 +17,8 @@
#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE | 0x104)
#define CPU_RESET_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108)
#define WDT_RESET 0x0002
#define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108)
#define WDT_RESET_OUT_EN 0x0002
#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE | 0x10c)

6
arch/arm/mach-orion5x/include/mach/orion5x.h
View File

@ -24,6 +24,7 @@
* f1000000 on-chip peripheral registers
* f2000000 PCIe I/O space
* f2100000 PCI I/O space
* f2200000 SRAM dedicated for the crypto unit
* f4000000 device bus mappings (boot)
* fa000000 device bus mappings (cs0)
* fa800000 device bus mappings (cs2)
@ -49,6 +50,9 @@
#define ORION5X_PCI_IO_BUS_BASE 0x00100000
#define ORION5X_PCI_IO_SIZE SZ_1M
#define ORION5X_SRAM_PHYS_BASE (0xf2200000)
#define ORION5X_SRAM_SIZE SZ_8K
/* Relevant only for Orion-1/Orion-NAS */
#define ORION5X_PCIE_WA_PHYS_BASE 0xf0000000
#define ORION5X_PCIE_WA_VIRT_BASE 0xfe000000
@ -94,6 +98,8 @@
#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000)
#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000)
#define ORION5X_CRYPTO_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x90000)
#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000)
#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000)

2
arch/arm/mach-orion5x/include/mach/system.h
View File

@ -23,7 +23,7 @@ static inline void arch_reset(char mode, const char *cmd)
/*
* Enable and issue soft reset
*/
orion5x_setbits(CPU_RESET_MASK, (1 << 2));
orion5x_setbits(RSTOUTn_MASK, (1 << 2));
orion5x_setbits(CPU_SOFT_RESET, 1);
}

3
arch/arm/mach-orion5x/mpp.c
View File

@ -124,6 +124,9 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
u32 mpp_8_15_ctrl = readl(MPP_8_15_CTRL);
u32 mpp_16_19_ctrl = readl(MPP_16_19_CTRL);
/* Initialize gpiolib. */
orion_gpio_init();
while (mode->mpp >= 0) {
u32 *reg;
int num_type;

4
arch/arm/mach-orion5x/mss2-setup.c
View File

@ -181,9 +181,9 @@ static void mss2_power_off(void)
/*
* Enable and issue soft reset
*/
reg = readl(CPU_RESET_MASK);
reg = readl(RSTOUTn_MASK);
reg |= 1 << 2;
writel(reg, CPU_RESET_MASK);
writel(reg, RSTOUTn_MASK);
reg = readl(CPU_SOFT_RESET);
reg |= 1;

1
arch/arm/mach-orion5x/ts78xx-fpga.h
View File

@ -25,6 +25,7 @@ struct fpga_devices {
/* Technologic Systems */
struct fpga_device ts_rtc;
struct fpga_device ts_nand;
struct fpga_device ts_rng;
};
struct ts78xx_fpga_data {

58
arch/arm/mach-orion5x/ts78xx-setup.c
View File

@ -17,6 +17,7 @@
#include <linux/m48t86.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/timeriomem-rng.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@ -269,6 +270,50 @@ static void ts78xx_ts_nand_unload(void)
platform_device_del(&ts78xx_ts_nand_device);
}
/*****************************************************************************
* HW RNG
****************************************************************************/
#define TS_RNG_DATA (TS78XX_FPGA_REGS_PHYS_BASE | 0x044)
static struct resource ts78xx_ts_rng_resource = {
.flags = IORESOURCE_MEM,
.start = TS_RNG_DATA,
.end = TS_RNG_DATA + 4 - 1,
};
static struct timeriomem_rng_data ts78xx_ts_rng_data = {
.period = 1000000, /* one second */
};
static struct platform_device ts78xx_ts_rng_device = {
.name = "timeriomem_rng",
.id = -1,
.dev = {
.platform_data = &ts78xx_ts_rng_data,
},
.resource = &ts78xx_ts_rng_resource,
.num_resources = 1,
};
static int ts78xx_ts_rng_load(void)
{
int rc;
if (ts78xx_fpga.supports.ts_rng.init == 0) {
rc = platform_device_register(&ts78xx_ts_rng_device);
if (!rc)
ts78xx_fpga.supports.ts_rng.init = 1;
} else
rc = platform_device_add(&ts78xx_ts_rng_device);
return rc;
};
static void ts78xx_ts_rng_unload(void)
{
platform_device_del(&ts78xx_ts_rng_device);
}
/*****************************************************************************
* FPGA 'hotplug' support code
****************************************************************************/
@ -276,6 +321,7 @@ static void ts78xx_fpga_devices_zero_init(void)
{
ts78xx_fpga.supports.ts_rtc.init = 0;
ts78xx_fpga.supports.ts_nand.init = 0;
ts78xx_fpga.supports.ts_rng.init = 0;
}
static void ts78xx_fpga_supports(void)
@ -289,10 +335,12 @@ static void ts78xx_fpga_supports(void)
case TS7800_REV_5:
ts78xx_fpga.supports.ts_rtc.present = 1;
ts78xx_fpga.supports.ts_nand.present = 1;
ts78xx_fpga.supports.ts_rng.present = 1;
break;
default:
ts78xx_fpga.supports.ts_rtc.present = 0;
ts78xx_fpga.supports.ts_nand.present = 0;
ts78xx_fpga.supports.ts_rng.present = 0;
}
}
@ -316,6 +364,14 @@ static int ts78xx_fpga_load_devices(void)
}
ret |= tmp;
}
if (ts78xx_fpga.supports.ts_rng.present == 1) {
tmp = ts78xx_ts_rng_load();
if (tmp) {
printk(KERN_INFO "TS-78xx: RNG not registered\n");
ts78xx_fpga.supports.ts_rng.present = 0;
}
ret |= tmp;
}
return ret;
}
@ -328,6 +384,8 @@ static int ts78xx_fpga_unload_devices(void)
ts78xx_ts_rtc_unload();
if (ts78xx_fpga.supports.ts_nand.present == 1)
ts78xx_ts_nand_unload();
if (ts78xx_fpga.supports.ts_rng.present == 1)
ts78xx_ts_rng_unload();
return ret;
}

16
arch/arm/mach-orion5x/wnr854t-setup.c
View File

@ -15,6 +15,7 @@
#include <linux/mtd/physmap.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
#include <asm/mach/arch.h>
@ -97,6 +98,20 @@ static struct mv643xx_eth_platform_data wnr854t_eth_data = {
.duplex = DUPLEX_FULL,
};
static struct dsa_chip_data wnr854t_switch_chip_data = {
.port_names[0] = "lan3",
.port_names[1] = "lan4",
.port_names[2] = "wan",
.port_names[3] = "cpu",
.port_names[5] = "lan1",
.port_names[7] = "lan2",
};
static struct dsa_platform_data wnr854t_switch_plat_data = {
.nr_chips = 1,
.chip = &wnr854t_switch_chip_data,
};
static void __init wnr854t_init(void)
{
/*
@ -110,6 +125,7 @@ static void __init wnr854t_init(void)
* Configure peripherals.
*/
orion5x_eth_init(&wnr854t_eth_data);
orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ);
orion5x_uart0_init();
orion5x_setup_dev_boot_win(WNR854T_NOR_BOOT_BASE,

36
arch/arm/mach-pxa/ezx.c
View File

@ -111,9 +111,9 @@ static unsigned long ezx_pin_config[] __initdata = {
GPIO25_SSP1_TXD,
GPIO26_SSP1_RXD,
GPIO24_GPIO, /* pcap chip select */
GPIO1_GPIO, /* pcap interrupt */
GPIO4_GPIO, /* WDI_AP */
GPIO55_GPIO, /* SYS_RESTART */
GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* pcap interrupt */
GPIO4_GPIO | MFP_LPM_DRIVE_HIGH, /* WDI_AP */
GPIO55_GPIO | MFP_LPM_DRIVE_HIGH, /* SYS_RESTART */
/* MMC */
GPIO32_MMC_CLK,
@ -144,20 +144,20 @@ static unsigned long ezx_pin_config[] __initdata = {
#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
static unsigned long gen1_pin_config[] __initdata = {
/* flip / lockswitch */
GPIO12_GPIO,
GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
/* bluetooth (bcm2035) */
GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
GPIO14_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
GPIO48_GPIO, /* RESET */
GPIO28_GPIO, /* WAKEUP */
/* Neptune handshake */
GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */
GPIO57_GPIO, /* AP_RDY */
GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */
GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI2 */
GPIO82_GPIO, /* RESET */
GPIO99_GPIO, /* TC_MM_EN */
GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
GPIO57_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI */
GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI2 */
GPIO82_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
GPIO99_GPIO | MFP_LPM_DRIVE_HIGH, /* TC_MM_EN */
/* sound */
GPIO52_SSP3_SCLK,
@ -199,21 +199,21 @@ static unsigned long gen1_pin_config[] __initdata = {
defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
static unsigned long gen2_pin_config[] __initdata = {
/* flip / lockswitch */
GPIO15_GPIO,
GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
/* EOC */
GPIO10_GPIO,
GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
/* bluetooth (bcm2045) */
GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
GPIO13_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
GPIO37_GPIO, /* RESET */
GPIO57_GPIO, /* WAKEUP */
/* Neptune handshake */
GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */
GPIO96_GPIO, /* AP_RDY */
GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */
GPIO116_GPIO, /* RESET */
GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
GPIO96_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* WDI */
GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
GPIO41_GPIO, /* BP_FLASH */
/* sound */

5
arch/arm/mach-pxa/include/mach/reset.h
View File

@ -13,8 +13,9 @@ extern void clear_reset_status(unsigned int mask);
/**
* init_gpio_reset() - register GPIO as reset generator
* @gpio: gpio nr
* @output: set gpio as out/low instead of input during normal work
* @output: set gpio as output instead of input during normal work
* @level: output level
*/
extern int init_gpio_reset(int gpio, int output);
extern int init_gpio_reset(int gpio, int output, int level);
#endif /* __ASM_ARCH_RESET_H */

6
arch/arm/mach-pxa/mfp-pxa2xx.c
View File

@ -322,6 +322,7 @@ static inline void pxa27x_mfp_init(void) {}
#ifdef CONFIG_PM
static unsigned long saved_gafr[2][4];
static unsigned long saved_gpdr[4];
static unsigned long saved_pgsr[4];
static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
{
@ -332,6 +333,7 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
saved_gafr[0][i] = GAFR_L(i);
saved_gafr[1][i] = GAFR_U(i);
saved_gpdr[i] = GPDR(i * 32);
saved_pgsr[i] = PGSR(i);
GPDR(i * 32) = gpdr_lpm[i];
}
@ -346,6 +348,7 @@ static int pxa2xx_mfp_resume(struct sys_device *d)
GAFR_L(i) = saved_gafr[0][i];
GAFR_U(i) = saved_gafr[1][i];
GPDR(i * 32) = saved_gpdr[i];
PGSR(i) = saved_pgsr[i];
}
PSSR = PSSR_RDH | PSSR_PH;
return 0;
@ -374,6 +377,9 @@ static int __init pxa2xx_mfp_init(void)
if (cpu_is_pxa27x())
pxa27x_mfp_init();
/* clear RDH bit to enable GPIO receivers after reset/sleep exit */
PSSR = PSSR_RDH;
/* initialize gafr_run[], pgsr_lpm[] from existing values */
for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
gpdr_lpm[i] = GPDR(i * 32);

2
arch/arm/mach-pxa/palmld.c
View File

@ -62,6 +62,8 @@ static unsigned long palmld_pin_config[] __initdata = {
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
GPIO89_AC97_SYSCLK,
GPIO95_AC97_nRESET,
/* IrDA */
GPIO108_GPIO, /* ir disable */

1
arch/arm/mach-pxa/palmt5.c
View File

@ -64,6 +64,7 @@ static unsigned long palmt5_pin_config[] __initdata = {
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
GPIO89_AC97_SYSCLK,
GPIO95_AC97_nRESET,
/* IrDA */

1
arch/arm/mach-pxa/palmtx.c
View File

@ -65,6 +65,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
GPIO89_AC97_SYSCLK,
GPIO95_AC97_nRESET,
/* IrDA */

4
arch/arm/mach-pxa/reset.c
View File

@ -20,7 +20,7 @@ static void do_hw_reset(void);
static int reset_gpio = -1;
int init_gpio_reset(int gpio, int output)
int init_gpio_reset(int gpio, int output, int level)
{
int rc;
@ -31,7 +31,7 @@ int init_gpio_reset(int gpio, int output)
}
if (output)
rc = gpio_direction_output(gpio, 0);
rc = gpio_direction_output(gpio, level);
else
rc = gpio_direction_input(gpio);
if (rc) {

8
arch/arm/mach-pxa/spitz.c
View File

@ -531,9 +531,15 @@ static int spitz_ohci_init(struct device *dev)
return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
}
static void spitz_ohci_exit(struct device *dev)
{
gpio_free(SPITZ_GPIO_USB_HOST);
}
static struct pxaohci_platform_data spitz_ohci_platform_data = {
.port_mode = PMM_NPS_MODE,
.init = spitz_ohci_init,
.exit = spitz_ohci_exit,
.flags = ENABLE_PORT_ALL | NO_OC_PROTECTION,
.power_budget = 150,
};
@ -731,7 +737,7 @@ static void spitz_restart(char mode, const char *cmd)
static void __init common_init(void)
{
init_gpio_reset(SPITZ_GPIO_ON_RESET, 1);
init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
pm_power_off = spitz_poweroff;
arm_pm_restart = spitz_restart;

2
arch/arm/mach-pxa/tosa.c
View File

@ -897,7 +897,7 @@ static void __init tosa_init(void)
gpio_set_wake(MFP_PIN_GPIO1, 1);
/* We can't pass to gpio-keys since it will drop the Reset altfunc */
init_gpio_reset(TOSA_GPIO_ON_RESET, 0);
init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
pm_power_off = tosa_poweroff;
arm_pm_restart = tosa_restart;

206
arch/arm/plat-orion/gpio.c
View File

@ -15,10 +15,9 @@
#include <linux/spinlock.h>
#include <linux/bitops.h>
#include <linux/io.h>
#include <asm/gpio.h>
#include <linux/gpio.h>
static DEFINE_SPINLOCK(gpio_lock);
static const char *gpio_label[GPIO_MAX]; /* non null for allocated GPIOs */
static unsigned long gpio_valid_input[BITS_TO_LONGS(GPIO_MAX)];
static unsigned long gpio_valid_output[BITS_TO_LONGS(GPIO_MAX)];
@ -46,82 +45,54 @@ static void __set_level(unsigned pin, int high)
writel(u, GPIO_OUT(pin));
}
static inline void __set_blinking(unsigned pin, int blink)
{
u32 u;
u = readl(GPIO_BLINK_EN(pin));
if (blink)
u |= 1 << (pin & 31);
else
u &= ~(1 << (pin & 31));
writel(u, GPIO_BLINK_EN(pin));
}
static inline int orion_gpio_is_valid(unsigned pin, int mode)
{
if (pin < GPIO_MAX) {
if ((mode & GPIO_INPUT_OK) && !test_bit(pin, gpio_valid_input))
goto err_out;
if ((mode & GPIO_OUTPUT_OK) && !test_bit(pin, gpio_valid_output))
goto err_out;
return true;
}
err_out:
pr_debug("%s: invalid GPIO %d\n", __func__, pin);
return false;
}
/*
* GENERIC_GPIO primitives.
*/
int gpio_direction_input(unsigned pin)
static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin)
{
unsigned long flags;
if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_input)) {
pr_debug("%s: invalid GPIO %d\n", __func__, pin);
if (!orion_gpio_is_valid(pin, GPIO_INPUT_OK))
return -EINVAL;
}
spin_lock_irqsave(&gpio_lock, flags);
/*
* Some callers might not have used gpio_request(),
* so flag this pin as requested now.
*/
if (gpio_label[pin] == NULL)
gpio_label[pin] = "?";
/*
* Configure GPIO direction.
*/
/* Configure GPIO direction. */
__set_direction(pin, 1);
spin_unlock_irqrestore(&gpio_lock, flags);
return 0;
}
EXPORT_SYMBOL(gpio_direction_input);
int gpio_direction_output(unsigned pin, int value)
{
unsigned long flags;
u32 u;
if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_output)) {
pr_debug("%s: invalid GPIO %d\n", __func__, pin);
return -EINVAL;
}
spin_lock_irqsave(&gpio_lock, flags);
/*
* Some callers might not have used gpio_request(),
* so flag this pin as requested now.
*/
if (gpio_label[pin] == NULL)
gpio_label[pin] = "?";
/*
* Disable blinking.
*/
u = readl(GPIO_BLINK_EN(pin));
u &= ~(1 << (pin & 31));
writel(u, GPIO_BLINK_EN(pin));
/*
* Configure GPIO output value.
*/
__set_level(pin, value);
/*
* Configure GPIO direction.
*/
__set_direction(pin, 0);
spin_unlock_irqrestore(&gpio_lock, flags);
return 0;
}
EXPORT_SYMBOL(gpio_direction_output);
int gpio_get_value(unsigned pin)
static int orion_gpio_get_value(struct gpio_chip *chip, unsigned pin)
{
int val;
@ -132,83 +103,75 @@ int gpio_get_value(unsigned pin)
return (val >> (pin & 31)) & 1;
}
EXPORT_SYMBOL(gpio_get_value);
void gpio_set_value(unsigned pin, int value)
static int orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin,
int value)
{
unsigned long flags;
u32 u;
if (!orion_gpio_is_valid(pin, GPIO_OUTPUT_OK))
return -EINVAL;
spin_lock_irqsave(&gpio_lock, flags);
/*
* Disable blinking.
*/
u = readl(GPIO_BLINK_EN(pin));
u &= ~(1 << (pin & 31));
writel(u, GPIO_BLINK_EN(pin));
/* Disable blinking. */
__set_blinking(pin, 0);
/*
* Configure GPIO output value.
*/
/* Configure GPIO output value. */
__set_level(pin, value);
/* Configure GPIO direction. */
__set_direction(pin, 0);
spin_unlock_irqrestore(&gpio_lock, flags);
return 0;
}
static void orion_gpio_set_value(struct gpio_chip *chip, unsigned pin,
int value)
{
unsigned long flags;
spin_lock_irqsave(&gpio_lock, flags);
/* Configure GPIO output value. */
__set_level(pin, value);
spin_unlock_irqrestore(&gpio_lock, flags);
}
EXPORT_SYMBOL(gpio_set_value);
int gpio_request(unsigned pin, const char *label)
static int orion_gpio_request(struct gpio_chip *chip, unsigned pin)
{
unsigned long flags;
int ret;
if (pin >= GPIO_MAX ||
!(test_bit(pin, gpio_valid_input) ||
test_bit(pin, gpio_valid_output))) {
pr_debug("%s: invalid GPIO %d\n", __func__, pin);
return -EINVAL;
}
spin_lock_irqsave(&gpio_lock, flags);
if (gpio_label[pin] == NULL) {
gpio_label[pin] = label ? label : "?";
ret = 0;
} else {
pr_debug("%s: GPIO %d already used as %s\n",
__func__, pin, gpio_label[pin]);
ret = -EBUSY;
}
spin_unlock_irqrestore(&gpio_lock, flags);
return ret;
if (orion_gpio_is_valid(pin, GPIO_INPUT_OK) ||
orion_gpio_is_valid(pin, GPIO_OUTPUT_OK))
return 0;
return -EINVAL;
}
EXPORT_SYMBOL(gpio_request);
void gpio_free(unsigned pin)
static struct gpio_chip orion_gpiochip = {
.label = "orion_gpio",
.direction_input = orion_gpio_direction_input,
.get = orion_gpio_get_value,
.direction_output = orion_gpio_direction_output,
.set = orion_gpio_set_value,
.request = orion_gpio_request,
.base = 0,
.ngpio = GPIO_MAX,
.can_sleep = 0,
};
void __init orion_gpio_init(void)
{
if (pin >= GPIO_MAX ||
!(test_bit(pin, gpio_valid_input) ||
test_bit(pin, gpio_valid_output))) {
pr_debug("%s: invalid GPIO %d\n", __func__, pin);
return;
}
if (gpio_label[pin] == NULL)
pr_warning("%s: GPIO %d already freed\n", __func__, pin);
else
gpio_label[pin] = NULL;
gpiochip_add(&orion_gpiochip);
}
EXPORT_SYMBOL(gpio_free);
/*
* Orion-specific GPIO API extensions.
*/
void __init orion_gpio_set_unused(unsigned pin)
{
/*
* Configure as output, drive low.
*/
/* Configure as output, drive low. */
__set_level(pin, 0);
__set_direction(pin, 0);
}
@ -230,21 +193,14 @@ void __init orion_gpio_set_valid(unsigned pin, int mode)
void orion_gpio_set_blink(unsigned pin, int blink)
{
unsigned long flags;
u32 u;
spin_lock_irqsave(&gpio_lock, flags);
/*
* Set output value to zero.
*/
/* Set output value to zero. */
__set_level(pin, 0);
u = readl(GPIO_BLINK_EN(pin));
if (blink)
u |= 1 << (pin & 31);
else
u &= ~(1 << (pin & 31));
writel(u, GPIO_BLINK_EN(pin));
/* Set blinking. */
__set_blinking(pin, blink);
spin_unlock_irqrestore(&gpio_lock, flags);
}
@ -368,7 +324,7 @@ static int gpio_irq_set_type(u32 irq, u32 type)
}
struct irq_chip orion_gpio_irq_chip = {
.name = "orion_gpio",
.name = "orion_gpio_irq",
.ack = gpio_irq_ack,
.mask = gpio_irq_mask,
.unmask = gpio_irq_unmask,

17
arch/arm/plat-orion/include/plat/gpio.h
View File

@ -14,12 +14,9 @@
/*
* GENERIC_GPIO primitives.
*/
int gpio_request(unsigned pin, const char *label);
void gpio_free(unsigned pin);
int gpio_direction_input(unsigned pin);
int gpio_direction_output(unsigned pin, int value);
int gpio_get_value(unsigned pin);
void gpio_set_value(unsigned pin, int value);
#define gpio_get_value __gpio_get_value
#define gpio_set_value __gpio_set_value
#define gpio_cansleep __gpio_cansleep
/*
* Orion-specific GPIO API extensions.
@ -27,11 +24,13 @@ void gpio_set_value(unsigned pin, int value);
void orion_gpio_set_unused(unsigned pin);
void orion_gpio_set_blink(unsigned pin, int blink);
#define GPIO_BIDI_OK (1 << 0)
#define GPIO_INPUT_OK (1 << 1)
#define GPIO_OUTPUT_OK (1 << 2)
#define GPIO_INPUT_OK (1 << 0)
#define GPIO_OUTPUT_OK (1 << 1)
void orion_gpio_set_valid(unsigned pin, int mode);
/* Initialize gpiolib. */
void __init orion_gpio_init(void);
/*
* GPIO interrupt handling.
*/

8
arch/arm/plat-orion/include/plat/orion5x_wdt.h → arch/arm/plat-orion/include/plat/orion_wdt.h
View File

@ -1,15 +1,15 @@
/*
* arch/arm/plat-orion/include/plat/orion5x_wdt.h
* arch/arm/plat-orion/include/plat/orion_wdt.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __PLAT_ORION5X_WDT_H
#define __PLAT_ORION5X_WDT_H
#ifndef __PLAT_ORION_WDT_H
#define __PLAT_ORION_WDT_H
struct orion5x_wdt_platform_data {
struct orion_wdt_platform_data {
u32 tclk; /* no <linux/clk.h> support yet */
};

59
arch/arm/plat-orion/time.c
View File

@ -12,11 +12,15 @@
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/cnt32_to_63.h>
#include <linux/timer.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/mach/time.h>
#include <mach/bridge-regs.h>
#include <mach/hardware.h>
/*
* Number of timer ticks per jiffy.
@ -38,6 +42,56 @@ static u32 ticks_per_jiffy;
#define TIMER1_VAL (TIMER_VIRT_BASE + 0x001c)
/*
* Orion's sched_clock implementation. It has a resolution of
* at least 7.5ns (133MHz TCLK) and a maximum value of 834 days.
*
* Because the hardware timer period is quite short (21 secs if
* 200MHz TCLK) and because cnt32_to_63() needs to be called at
* least once per half period to work properly, a kernel timer is
* set up to ensure this requirement is always met.
*/
#define TCLK2NS_SCALE_FACTOR 8
static unsigned long tclk2ns_scale;
unsigned long long sched_clock(void)
{
unsigned long long v = cnt32_to_63(0xffffffff - readl(TIMER0_VAL));
return (v * tclk2ns_scale) >> TCLK2NS_SCALE_FACTOR;
}
static struct timer_list cnt32_to_63_keepwarm_timer;
static void cnt32_to_63_keepwarm(unsigned long data)
{
mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
(void) sched_clock();
}
static void __init setup_sched_clock(unsigned long tclk)
{
unsigned long long v;
unsigned long data;
v = NSEC_PER_SEC;
v <<= TCLK2NS_SCALE_FACTOR;
v += tclk/2;
do_div(v, tclk);
/*
* We want an even value to automatically clear the top bit
* returned by cnt32_to_63() without an additional run time
* instruction. So if the LSB is 1 then round it up.
*/
if (v & 1)
v++;
tclk2ns_scale = v;
data = (0xffffffffUL / tclk / 2 - 2) * HZ;
setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, data);
mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
}
/*
* Clocksource handling.
*/
@ -176,6 +230,10 @@ void __init orion_time_init(unsigned int irq, unsigned int tclk)
ticks_per_jiffy = (tclk + HZ/2) / HZ;
/*
* Set scale and timer for sched_clock
*/
setup_sched_clock(tclk);
/*
* Setup free-running clocksource timer (interrupts
@ -190,7 +248,6 @@ void __init orion_time_init(unsigned int irq, unsigned int tclk)
orion_clksrc.mult = clocksource_hz2mult(tclk, orion_clksrc.shift);
clocksource_register(&orion_clksrc);
/*
* Setup clockevent timer (interrupt-driven.)
*/

131
arch/arm/tools/mach-types
View File

@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
# Last update: Mon Mar 23 20:09:01 2009
# Last update: Fri May 29 10:14:20 2009
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@ -916,7 +916,7 @@ nxdb500 MACH_NXDB500 NXDB500 905
apf9328 MACH_APF9328 APF9328 906
omap_wipoq MACH_OMAP_WIPOQ OMAP_WIPOQ 907
omap_twip MACH_OMAP_TWIP OMAP_TWIP 908
palmt650 MACH_PALMT650 PALMT650 909
treo650 MACH_TREO650 TREO650 909
acumen MACH_ACUMEN ACUMEN 910
xp100 MACH_XP100 XP100 911
fs2410 MACH_FS2410 FS2410 912
@ -1232,7 +1232,7 @@ ql202b MACH_QL202B QL202B 1226
vpac270 MACH_VPAC270 VPAC270 1227
rd129 MACH_RD129 RD129 1228
htcwizard MACH_HTCWIZARD HTCWIZARD 1229
xscale_treo680 MACH_XSCALE_TREO680 XSCALE_TREO680 1230
treo680 MACH_TREO680 TREO680 1230
tecon_tmezon MACH_TECON_TMEZON TECON_TMEZON 1231
zylonite MACH_ZYLONITE ZYLONITE 1233
gene1270 MACH_GENE1270 GENE1270 1234
@ -1418,10 +1418,10 @@ looxc550 MACH_LOOXC550 LOOXC550 1417
cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418
app3xx MACH_APP3XX APP3XX 1419
sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420
palmtreo700p MACH_PALMTREO700P PALMTREO700P 1421
palmtreo700w MACH_PALMTREO700W PALMTREO700W 1422
palmtreo750 MACH_PALMTREO750 PALMTREO750 1423
palmtreo755p MACH_PALMTREO755P PALMTREO755P 1424
treo700p MACH_TREO700P TREO700P 1421
treo700w MACH_TREO700W TREO700W 1422
treo750 MACH_TREO750 TREO750 1423
treo755p MACH_TREO755P TREO755P 1424
ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425
sarge MACH_SARGE SARGE 1426
a696 MACH_A696 A696 1427
@ -1721,7 +1721,7 @@ sapphire MACH_SAPPHIRE SAPPHIRE 1729
csb637xo MACH_CSB637XO CSB637XO 1730
evisiong MACH_EVISIONG EVISIONG 1731
stmp37xx MACH_STMP37XX STMP37XX 1732
stmp378x MACH_STMP38XX STMP38XX 1733
stmp378x MACH_STMP378X STMP378X 1733
tnt MACH_TNT TNT 1734
tbxt MACH_TBXT TBXT 1735
playmate MACH_PLAYMATE PLAYMATE 1736
@ -1817,7 +1817,7 @@ smdkc100 MACH_SMDKC100 SMDKC100 1826
tavorevb MACH_TAVOREVB TAVOREVB 1827
saar MACH_SAAR SAAR 1828
deister_eyecam MACH_DEISTER_EYECAM DEISTER_EYECAM 1829
at91sam9m10ek MACH_AT91SAM9M10EK AT91SAM9M10EK 1830
at91sam9m10g45ek MACH_AT91SAM9M10G45EK AT91SAM9M10G45EK 1830
linkstation_produo MACH_LINKSTATION_PRODUO LINKSTATION_PRODUO 1831
hit_b0 MACH_HIT_B0 HIT_B0 1832
adx_rmu MACH_ADX_RMU ADX_RMU 1833
@ -2132,3 +2132,116 @@ apollo MACH_APOLLO APOLLO 2141
at91cap9stk MACH_AT91CAP9STK AT91CAP9STK 2142
spc300 MACH_SPC300 SPC300 2143
eko MACH_EKO EKO 2144
ccw9m2443 MACH_CCW9M2443 CCW9M2443 2145
ccw9m2443js MACH_CCW9M2443JS CCW9M2443JS 2146
m2m_router_device MACH_M2M_ROUTER_DEVICE M2M_ROUTER_DEVICE 2147
str9104nas MACH_STAR9104NAS STAR9104NAS 2148
pca100 MACH_PCA100 PCA100 2149
z3_dm365_mod_01 MACH_Z3_DM365_MOD_01 Z3_DM365_MOD_01 2150
hipox MACH_HIPOX HIPOX 2151
omap3_piteds MACH_OMAP3_PITEDS OMAP3_PITEDS 2152
bm150r MACH_BM150R BM150R 2153
tbone MACH_TBONE TBONE 2154
merlin MACH_MERLIN MERLIN 2155
falcon MACH_FALCON FALCON 2156
davinci_da850_evm MACH_DAVINCI_DA850_EVM DAVINCI_DA850_EVM 2157
s5p6440 MACH_S5P6440 S5P6440 2158
at91sam9g10ek MACH_AT91SAM9G10EK AT91SAM9G10EK 2159
omap_4430sdp MACH_OMAP_4430SDP OMAP_4430SDP 2160
lpc313x MACH_LPC313X LPC313X 2161
magx_zn5 MACH_MAGX_ZN5 MAGX_ZN5 2162
magx_em30 MACH_MAGX_EM30 MAGX_EM30 2163
magx_ve66 MACH_MAGX_VE66 MAGX_VE66 2164
meesc MACH_MEESC MEESC 2165
otc570 MACH_OTC570 OTC570 2166
bcu2412 MACH_BCU2412 BCU2412 2167
beacon MACH_BEACON BEACON 2168
actia_tgw MACH_ACTIA_TGW ACTIA_TGW 2169
e4430 MACH_E4430 E4430 2170
ql300 MACH_QL300 QL300 2171
btmavb101 MACH_BTMAVB101 BTMAVB101 2172
btmawb101 MACH_BTMAWB101 BTMAWB101 2173
sq201 MACH_SQ201 SQ201 2174
quatro45xx MACH_QUATRO45XX QUATRO45XX 2175
openpad MACH_OPENPAD OPENPAD 2176
tx25 MACH_TX25 TX25 2177
omap3_torpedo MACH_OMAP3_TORPEDO OMAP3_TORPEDO 2178
htcraphael_k MACH_HTCRAPHAEL_K HTCRAPHAEL_K 2179
lal43 MACH_LAL43 LAL43 2181
htcraphael_cdma500 MACH_HTCRAPHAEL_CDMA500 HTCRAPHAEL_CDMA500 2182
anw6410 MACH_ANW6410 ANW6410 2183
htcprophet MACH_HTCPROPHET HTCPROPHET 2185
cfa_10022 MACH_CFA_10022 CFA_10022 2186
imx27_visstrim_m10 MACH_IMX27_VISSTRIM_M10 IMX27_VISSTRIM_M10 2187
px2imx27 MACH_PX2IMX27 PX2IMX27 2188
stm3210e_eval MACH_STM3210E_EVAL STM3210E_EVAL 2189
dvs10 MACH_DVS10 DVS10 2190
portuxg20 MACH_PORTUXG20 PORTUXG20 2191
arm_spv MACH_ARM_SPV ARM_SPV 2192
smdkc110 MACH_SMDKC110 SMDKC110 2193
cabespresso MACH_CABESPRESSO CABESPRESSO 2194
hmc800 MACH_HMC800 HMC800 2195
sholes MACH_SHOLES SHOLES 2196
btmxc31 MACH_BTMXC31 BTMXC31 2197
dt501 MACH_DT501 DT501 2198
ktx MACH_KTX KTX 2199
omap3517evm MACH_OMAP3517EVM OMAP3517EVM 2200
netspace_v2 MACH_NETSPACE_V2 NETSPACE_V2 2201
netspace_max_v2 MACH_NETSPACE_MAX_V2 NETSPACE_MAX_V2 2202
d2net_v2 MACH_D2NET_V2 D2NET_V2 2203
net2big_v2 MACH_NET2BIG_V2 NET2BIG_V2 2204
net4big_v2 MACH_NET4BIG_V2 NET4BIG_V2 2205
net5big_v2 MACH_NET5BIG_V2 NET5BIG_V2 2206
endb2443 MACH_ENDB2443 ENDB2443 2207
inetspace_v2 MACH_INETSPACE_V2 INETSPACE_V2 2208
tros MACH_TROS TROS 2209
pelco_homer MACH_PELCO_HOMER PELCO_HOMER 2210
ofsp8 MACH_OFSP8 OFSP8 2211
at91sam9g45ekes MACH_AT91SAM9G45EKES AT91SAM9G45EKES 2212
guf_cupid MACH_GUF_CUPID GUF_CUPID 2213
eab1r MACH_EAB1R EAB1R 2214
desirec MACH_DESIREC DESIREC 2215
cordoba MACH_CORDOBA CORDOBA 2216
irvine MACH_IRVINE IRVINE 2217
sff772 MACH_SFF772 SFF772 2218
pelco_milano MACH_PELCO_MILANO PELCO_MILANO 2219
pc7302 MACH_PC7302 PC7302 2220
bip6000 MACH_BIP6000 BIP6000 2221
silvermoon MACH_SILVERMOON SILVERMOON 2222
vc0830 MACH_VC0830 VC0830 2223
dt430 MACH_DT430 DT430 2224
ji42pf MACH_JI42PF JI42PF 2225
gnet_ksm MACH_GNET_KSM GNET_KSM 2226
gnet_sgm MACH_GNET_SGM GNET_SGM 2227
gnet_sgr MACH_GNET_SGR GNET_SGR 2228
omap3_icetekevm MACH_OMAP3_ICETEKEVM OMAP3_ICETEKEVM 2229
pnp MACH_PNP PNP 2230
ctera_2bay_k MACH_CTERA_2BAY_K CTERA_2BAY_K 2231
ctera_2bay_u MACH_CTERA_2BAY_U CTERA_2BAY_U 2232
sas_c MACH_SAS_C SAS_C 2233
vma2315 MACH_VMA2315 VMA2315 2234
vcs MACH_VCS VCS 2235
spear600 MACH_SPEAR600 SPEAR600 2236
spear300 MACH_SPEAR300 SPEAR300 2237
spear1300 MACH_SPEAR1300 SPEAR1300 2238
lilly1131 MACH_LILLY1131 LILLY1131 2239
arvoo_ax301 MACH_ARVOO_AX301 ARVOO_AX301 2240
mapphone MACH_MAPPHONE MAPPHONE 2241
legend MACH_LEGEND LEGEND 2242
salsa MACH_SALSA SALSA 2243
lounge MACH_LOUNGE LOUNGE 2244
vision MACH_VISION VISION 2245
vmb20 MACH_VMB20 VMB20 2246
hy2410 MACH_HY2410 HY2410 2247
hy9315 MACH_HY9315 HY9315 2248
bullwinkle MACH_BULLWINKLE BULLWINKLE 2249
arm_ultimator2 MACH_ARM_ULTIMATOR2 ARM_ULTIMATOR2 2250
vs_v210 MACH_VS_V210 VS_V210 2252
vs_v212 MACH_VS_V212 VS_V212 2253
hmt MACH_HMT HMT 2254
suen3 MACH_SUEN3 SUEN3 2255
vesper MACH_VESPER VESPER 2256
str9 MACH_STR9 STR9 2257
omap3_wl_ff MACH_OMAP3_WL_FF OMAP3_WL_FF 2258
simcom MACH_SIMCOM SIMCOM 2259
mcwebio MACH_MCWEBIO MCWEBIO 2260

1
arch/blackfin/include/asm/.gitignore vendored
View File

@ -1 +0,0 @@
+mach

1
arch/blackfin/include/asm/flat.h
View File

@ -10,7 +10,6 @@
#include <asm/unaligned.h>
#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)

4
arch/blackfin/include/asm/unistd.h
View File

@ -378,8 +378,10 @@
#define __NR_dup3 363
#define __NR_pipe2 364
#define __NR_inotify_init1 365
#define __NR_preadv 366
#define __NR_pwritev 367
#define __NR_syscall 366
#define __NR_syscall 368
#define NR_syscalls __NR_syscall
/* Old optional stuff no one actually uses */

1
arch/blackfin/kernel/.gitignore vendored Normal file
View File

@ -0,0 +1 @@
vmlinux.lds

3
arch/blackfin/lib/strncmp.c
View File

@ -8,9 +8,8 @@
#define strncmp __inline_strncmp
#include <asm/string.h>
#undef strncmp
#include <linux/module.h>
#undef strncmp
int strncmp(const char *cs, const char *ct, size_t count)
{

2
arch/blackfin/mach-common/entry.S
View File

@ -1581,6 +1581,8 @@ ENTRY(_sys_call_table)
.long _sys_dup3
.long _sys_pipe2
.long _sys_inotify_init1 /* 365 */
.long _sys_preadv
.long _sys_pwritev
.rept NR_syscalls-(.-_sys_call_table)/4
.long _sys_ni_syscall

1
arch/h8300/include/asm/flat.h
View File

@ -5,7 +5,6 @@
#ifndef __H8300_FLAT_H__
#define __H8300_FLAT_H__
#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) 1
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))

1
arch/m32r/include/asm/flat.h
View File

@ -12,7 +12,6 @@
#ifndef __ASM_M32R_FLAT_H
#define __ASM_M32R_FLAT_H
#define flat_stack_align(sp) (*sp += (*sp & 3 ? (4 - (*sp & 3)): 0))
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define flat_set_persistent(relval, p) 0

1
arch/m68k/include/asm/flat.h
View File

@ -5,7 +5,6 @@
#ifndef __M68KNOMMU_FLAT_H__
#define __M68KNOMMU_FLAT_H__
#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))

12
arch/powerpc/Kconfig
View File

@ -868,6 +868,18 @@ config TASK_SIZE
default "0x80000000" if PPC_PREP || PPC_8xx
default "0xc0000000"
config CONSISTENT_SIZE_BOOL
bool "Set custom consistent memory pool size"
depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
help
This option allows you to set the size of the
consistent memory pool. This pool of virtual memory
is used to make consistent memory allocations.
config CONSISTENT_SIZE
hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
default "0x00200000" if NOT_COHERENT_CACHE
config PIN_TLB
bool "Pinned Kernel TLBs (860 ONLY)"
depends on ADVANCED_OPTIONS && 8xx

278
arch/powerpc/configs/pmac32_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28-rc3
# Tue Nov 11 19:36:51 2008
# Linux kernel version: 2.6.30-rc7
# Mon May 25 14:53:25 2009
#
# CONFIG_PPC64 is not set
@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
@ -43,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
@ -52,12 +53,14 @@ CONFIG_OF=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_HIBERNATE_32=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@ -72,14 +75,24 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@ -88,23 +101,27 @@ CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@ -114,10 +131,12 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
@ -127,10 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@ -138,11 +157,8 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_LSF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
@ -158,14 +174,11 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
CONFIG_FREEZER=y
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@ -178,7 +191,9 @@ CONFIG_PPC_PMAC=y
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_AMIGAONE is not set
CONFIG_PPC_NATIVE=y
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@ -212,11 +227,12 @@ CONFIG_CPU_FREQ_PMAC=y
CONFIG_PPC601_SYNC_FIX=y
# CONFIG_TAU is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
CONFIG_HIGHMEM=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
@ -239,6 +255,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@ -250,12 +267,17 @@ CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MIGRATION is not set
# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@ -288,6 +310,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
@ -397,6 +421,8 @@ CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@ -405,6 +431,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@ -415,6 +442,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@ -478,17 +506,15 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=m
CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
@ -508,13 +534,16 @@ CONFIG_IP_DCCP_TFRC_LIB=m
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_IRDA=m
@ -577,8 +606,6 @@ CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
# CONFIG_BT_HCIUSB_SCO is not set
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=m
@ -590,31 +617,27 @@ CONFIG_BT_HCIBFUSB=m
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
CONFIG_NL80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@ -662,17 +685,27 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
@ -684,7 +717,6 @@ CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
@ -714,6 +746,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
@ -728,7 +761,6 @@ CONFIG_BLK_DEV_SL82C105=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDE_PMAC=y
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
CONFIG_BLK_DEV_IDEDMA=y
#
@ -772,6 +804,7 @@ CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@ -791,8 +824,12 @@ CONFIG_SCSI_AIC7XXX_OLD=m
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
@ -822,6 +859,7 @@ CONFIG_SCSI_MAC53C94=y
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
@ -881,6 +919,7 @@ CONFIG_THERM_ADT746X=m
# CONFIG_ANSLCD is not set
CONFIG_PMAC_RACKMETER=m
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@ -898,6 +937,8 @@ CONFIG_BMAC=y
CONFIG_SUNGEM=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@ -913,7 +954,6 @@ CONFIG_PCNET32=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
@ -923,6 +963,7 @@ CONFIG_PCNET32=y
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
@ -935,6 +976,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@ -945,18 +987,20 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@ -966,6 +1010,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@ -974,20 +1019,11 @@ CONFIG_NETDEV_10000=y
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
CONFIG_HERMES=m
CONFIG_APPLE_AIRPORT=m
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_NORTEL_HERMES is not set
CONFIG_PCI_HERMES=m
CONFIG_PCMCIA_HERMES=m
# CONFIG_PCMCIA_SPECTRUM is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
CONFIG_PRISM54=m
@ -997,15 +1033,17 @@ CONFIG_PRISM54=m
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
CONFIG_P54_COMMON=m
# CONFIG_P54_USB is not set
# CONFIG_P54_PCI is not set
CONFIG_P54_LEDS=y
# CONFIG_ATH5K is not set
# CONFIG_ATH9K is not set
# CONFIG_IWLCORE is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_IWLAGN is not set
# CONFIG_IWL3945 is not set
# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
@ -1025,6 +1063,19 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_PIO_MODE is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
CONFIG_HERMES=m
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_APPLE_AIRPORT=m
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_NORTEL_HERMES is not set
CONFIG_PCI_HERMES=m
CONFIG_PCMCIA_HERMES=m
# CONFIG_PCMCIA_SPECTRUM is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
@ -1036,6 +1087,7 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
@ -1099,7 +1151,7 @@ CONFIG_INPUT_KEYBOARD=y
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
CONFIG_MOUSE_APPLETOUCH=y
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
@ -1150,10 +1202,13 @@ CONFIG_SERIAL_PMACZILOG_TTYS=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_NVRAM=y
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
@ -1232,12 +1287,9 @@ CONFIG_I2C_POWERMAC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@ -1259,11 +1311,11 @@ CONFIG_BATTERY_PMU=y
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
@ -1281,18 +1333,13 @@ CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
#
# Voltage and Current regulators
#
# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
@ -1390,6 +1437,7 @@ CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_KYRO is not set
CONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_3DFX_I2C=y
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
@ -1399,12 +1447,14 @@ CONFIG_FB_3DFX=y
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
CONFIG_BACKLIGHT_GENERIC=y
#
# Display device support
@ -1444,11 +1494,13 @@ CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
# CONFIG_SND_VIRMIDI is not set
@ -1486,6 +1538,8 @@ CONFIG_SND_PCI=y
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
@ -1551,28 +1605,31 @@ CONFIG_USB_HID=y
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DELL=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_TOPSEED=y
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
@ -1603,6 +1660,7 @@ CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
@ -1625,24 +1683,23 @@ CONFIG_USB_PRINTER=m
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# may also be needed; see USB_STORAGE Help for more information
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_ONETOUCH=m
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
@ -1665,7 +1722,7 @@ CONFIG_USB_EZUSB=y
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
@ -1701,15 +1758,19 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
@ -1726,7 +1787,6 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=m
@ -1738,6 +1798,11 @@ CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@ -1748,7 +1813,9 @@ CONFIG_LEDS_CLASS=y
# LED drivers
#
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
@ -1759,11 +1826,16 @@ CONFIG_LEDS_TRIGGER_IDE_DISK=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@ -1774,6 +1846,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
@ -1783,7 +1856,9 @@ CONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
@ -1792,6 +1867,7 @@ CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@ -1800,6 +1876,11 @@ CONFIG_INOTIFY_USER=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
@ -1831,10 +1912,7 @@ CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
@ -1843,6 +1921,7 @@ CONFIG_HFSPLUS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@ -1851,6 +1930,7 @@ CONFIG_HFSPLUS_FS=m
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@ -1868,7 +1948,6 @@ CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
@ -1940,11 +2019,13 @@ CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
@ -1954,15 +2035,18 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
#
# Kernel hacking
@ -1973,13 +2057,16 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
@ -1994,6 +2081,7 @@ CONFIG_SCHEDSTATS=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
@ -2001,6 +2089,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
@ -2009,7 +2098,14 @@ CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
@ -2017,12 +2113,19 @@ CONFIG_HAVE_FUNCTION_TRACER=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
@ -2033,6 +2136,7 @@ CONFIG_XMON_DEFAULT=y
CONFIG_XMON_DISASSEMBLY=y
CONFIG_DEBUGGER=y
CONFIG_IRQSTACKS=y
# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
@ -2051,13 +2155,20 @@ CONFIG_CRYPTO=y
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
@ -2127,6 +2238,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#

6
arch/powerpc/include/asm/dma-mapping.h
View File

@ -26,7 +26,9 @@
* allocate the space "normally" and use the cache management functions
* to ensure it is consistent.
*/
extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp);
struct device;
extern void *__dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *handle, gfp_t gfp);
extern void __dma_free_coherent(size_t size, void *vaddr);
extern void __dma_sync(void *vaddr, size_t size, int direction);
extern void __dma_sync_page(struct page *page, unsigned long offset,
@ -37,7 +39,7 @@ extern void __dma_sync_page(struct page *page, unsigned long offset,
* Cache coherent cores.
*/
#define __dma_alloc_coherent(gfp, size, handle) NULL
#define __dma_alloc_coherent(dev, gfp, size, handle) NULL
#define __dma_free_coherent(size, addr) ((void)0)
#define __dma_sync(addr, size, rw) ((void)0)
#define __dma_sync_page(pg, off, sz, rw) ((void)0)

4
arch/powerpc/include/asm/fixmap.h
View File

@ -14,8 +14,6 @@
#ifndef _ASM_FIXMAP_H
#define _ASM_FIXMAP_H
extern unsigned long FIXADDR_TOP;
#ifndef __ASSEMBLY__
#include <linux/kernel.h>
#include <asm/page.h>
@ -24,6 +22,8 @@ extern unsigned long FIXADDR_TOP;
#include <asm/kmap_types.h>
#endif
#define FIXADDR_TOP ((unsigned long)(-PAGE_SIZE))
/*
* Here we define all the compile-time 'special' virtual
* addresses. The point is to have a constant address at

26
arch/powerpc/include/asm/pgtable-ppc32.h
View File

@ -10,7 +10,7 @@
extern unsigned long va_to_phys(unsigned long address);
extern pte_t *va_to_pte(unsigned long address);
extern unsigned long ioremap_bot, ioremap_base;
extern unsigned long ioremap_bot;
#ifdef CONFIG_44x
extern int icache_44x_need_flush;
@ -55,9 +55,31 @@ extern int icache_44x_need_flush;
#define pgd_ERROR(e) \
printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
/*
* This is the bottom of the PKMAP area with HIGHMEM or an arbitrary
* value (for now) on others, from where we can start layout kernel
* virtual space that goes below PKMAP and FIXMAP
*/
#ifdef CONFIG_HIGHMEM
#define KVIRT_TOP PKMAP_BASE
#else
#define KVIRT_TOP (0xfe000000UL) /* for now, could be FIXMAP_BASE ? */
#endif
/*
* ioremap_bot starts at that address. Early ioremaps move down from there,
* until mem_init() at which point this becomes the top of the vmalloc
* and ioremap space
*/
#ifdef CONFIG_NOT_COHERENT_CACHE
#define IOREMAP_TOP ((KVIRT_TOP - CONFIG_CONSISTENT_SIZE) & PAGE_MASK)
#else
#define IOREMAP_TOP KVIRT_TOP
#endif
/*
* Just any arbitrary offset to the start of the vmalloc VM area: the
* current 64MB value just means that there will be a 64MB "hole" after the
* current 16MB value just means that there will be a 64MB "hole" after the
* physical memory until the kernel virtual memory starts. That means that
* any out-of-bounds memory accesses will hopefully be caught.
* The vmalloc() routines leaves a hole of 4kB between each vmalloced

2
arch/powerpc/kernel/dma.c
View File

@ -32,7 +32,7 @@ void *dma_direct_alloc_coherent(struct device *dev, size_t size,
{
void *ret;
#ifdef CONFIG_NOT_COHERENT_CACHE
ret = __dma_alloc_coherent(size, dma_handle, flag);
ret = __dma_alloc_coherent(dev, size, dma_handle, flag);
if (ret == NULL)
return NULL;
*dma_handle += get_dma_direct_offset(dev);

1
arch/powerpc/lib/Makefile
View File

@ -18,7 +18,6 @@ obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \
memcpy_64.o usercopy_64.o mem_64.o string.o
obj-$(CONFIG_XMON) += sstep.o
obj-$(CONFIG_KPROBES) += sstep.o
obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
ifeq ($(CONFIG_PPC64),y)
obj-$(CONFIG_SMP) += locks.o

237
arch/powerpc/lib/dma-noncoherent.c
View File

@ -1,237 +0,0 @@
/*
* PowerPC version derived from arch/arm/mm/consistent.c
* Copyright (C) 2001 Dan Malek (dmalek@jlc.net)
*
* Copyright (C) 2000 Russell King
*
* Consistent memory allocators. Used for DMA devices that want to
* share uncached memory with the processor core. The function return
* is the virtual address and 'dma_handle' is the physical address.
* Mostly stolen from the ARM port, with some changes for PowerPC.
* -- Dan
*
* Reorganized to get rid of the arch-specific consistent_* functions
* and provide non-coherent implementations for the DMA API. -Matt
*
* Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent()
* implementation. This is pulled straight from ARM and barely
* modified. -Matt
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/highmem.h>
#include <linux/dma-mapping.h>
#include <linux/vmalloc.h>
#include <asm/tlbflush.h>
/*
* Allocate DMA-coherent memory space and return both the kernel remapped
* virtual and bus address for that space.
*/
void *
__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp)
{
struct page *page;
unsigned long order;
int i;
unsigned int nr_pages = PAGE_ALIGN(size)>>PAGE_SHIFT;
unsigned int array_size = nr_pages * sizeof(struct page *);
struct page **pages;
struct page *end;
u64 mask = 0x00ffffff, limit; /* ISA default */
struct vm_struct *area;
BUG_ON(!mem_init_done);
size = PAGE_ALIGN(size);
limit = (mask + 1) & ~mask;
if (limit && size >= limit) {
printk(KERN_WARNING "coherent allocation too big (requested "
"%#x mask %#Lx)\n", size, mask);
return NULL;
}
order = get_order(size);
if (mask != 0xffffffff)
gfp |= GFP_DMA;
page = alloc_pages(gfp, order);
if (!page)
goto no_page;
end = page + (1 << order);
/*
* Invalidate any data that might be lurking in the
* kernel direct-mapped region for device DMA.
*/
{
unsigned long kaddr = (unsigned long)page_address(page);
memset(page_address(page), 0, size);
flush_dcache_range(kaddr, kaddr + size);
}
split_page(page, order);
/*
* Set the "dma handle"
*/
*handle = page_to_phys(page);
area = get_vm_area_caller(size, VM_IOREMAP,
__builtin_return_address(1));
if (!area)
goto out_free_pages;
if (array_size > PAGE_SIZE) {
pages = vmalloc(array_size);
area->flags |= VM_VPAGES;
} else {
pages = kmalloc(array_size, GFP_KERNEL);
}
if (!pages)
goto out_free_area;
area->pages = pages;
area->nr_pages = nr_pages;
for (i = 0; i < nr_pages; i++)
pages[i] = page + i;
if (map_vm_area(area, pgprot_noncached(PAGE_KERNEL), &pages))
goto out_unmap;
/*
* Free the otherwise unused pages.
*/
page += nr_pages;
while (page < end) {
__free_page(page);
page++;
}
return area->addr;
out_unmap:
vunmap(area->addr);
if (array_size > PAGE_SIZE)
vfree(pages);
else
kfree(pages);
goto out_free_pages;
out_free_area:
free_vm_area(area);
out_free_pages:
if (page)
__free_pages(page, order);
no_page:
return NULL;
}
EXPORT_SYMBOL(__dma_alloc_coherent);
/*
* free a page as defined by the above mapping.
*/
void __dma_free_coherent(size_t size, void *vaddr)
{
vfree(vaddr);
}
EXPORT_SYMBOL(__dma_free_coherent);
/*
* make an area consistent.
*/
void __dma_sync(void *vaddr, size_t size, int direction)
{
unsigned long start = (unsigned long)vaddr;
unsigned long end = start + size;
switch (direction) {
case DMA_NONE:
BUG();
case DMA_FROM_DEVICE:
/*
* invalidate only when cache-line aligned otherwise there is
* the potential for discarding uncommitted data from the cache
*/
if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1)))
flush_dcache_range(start, end);
else
invalidate_dcache_range(start, end);
break;
case DMA_TO_DEVICE: /* writeback only */
clean_dcache_range(start, end);
break;
case DMA_BIDIRECTIONAL: /* writeback and invalidate */
flush_dcache_range(start, end);
break;
}
}
EXPORT_SYMBOL(__dma_sync);
#ifdef CONFIG_HIGHMEM
/*
* __dma_sync_page() implementation for systems using highmem.
* In this case, each page of a buffer must be kmapped/kunmapped
* in order to have a virtual address for __dma_sync(). This must
* not sleep so kmap_atomic()/kunmap_atomic() are used.
*
* Note: yes, it is possible and correct to have a buffer extend
* beyond the first page.
*/
static inline void __dma_sync_page_highmem(struct page *page,
unsigned long offset, size_t size, int direction)
{
size_t seg_size = min((size_t)(PAGE_SIZE - offset), size);
size_t cur_size = seg_size;
unsigned long flags, start, seg_offset = offset;
int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE;
int seg_nr = 0;
local_irq_save(flags);
do {
start = (unsigned long)kmap_atomic(page + seg_nr,
KM_PPC_SYNC_PAGE) + seg_offset;
/* Sync this buffer segment */
__dma_sync((void *)start, seg_size, direction);
kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE);
seg_nr++;
/* Calculate next buffer segment size */
seg_size = min((size_t)PAGE_SIZE, size - cur_size);
/* Add the segment size to our running total */
cur_size += seg_size;
seg_offset = 0;
} while (seg_nr < nr_segs);
local_irq_restore(flags);
}
#endif /* CONFIG_HIGHMEM */
/*
* __dma_sync_page makes memory consistent. identical to __dma_sync, but
* takes a struct page instead of a virtual address
*/
void __dma_sync_page(struct page *page, unsigned long offset,
size_t size, int direction)
{
#ifdef CONFIG_HIGHMEM
__dma_sync_page_highmem(page, offset, size, direction);
#else
unsigned long start = (unsigned long)page_address(page) + offset;
__dma_sync((void *)start, size, direction);
#endif
}
EXPORT_SYMBOL(__dma_sync_page);

1
arch/powerpc/mm/Makefile
View File

@ -26,3 +26,4 @@ obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o
obj-$(CONFIG_PPC_MM_SLICES) += slice.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o
obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o

400
arch/powerpc/mm/dma-noncoherent.c Normal file
View File

@ -0,0 +1,400 @@
/*
* PowerPC version derived from arch/arm/mm/consistent.c
* Copyright (C) 2001 Dan Malek (dmalek@jlc.net)
*
* Copyright (C) 2000 Russell King
*
* Consistent memory allocators. Used for DMA devices that want to
* share uncached memory with the processor core. The function return
* is the virtual address and 'dma_handle' is the physical address.
* Mostly stolen from the ARM port, with some changes for PowerPC.
* -- Dan
*
* Reorganized to get rid of the arch-specific consistent_* functions
* and provide non-coherent implementations for the DMA API. -Matt
*
* Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent()
* implementation. This is pulled straight from ARM and barely
* modified. -Matt
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/highmem.h>
#include <linux/dma-mapping.h>
#include <asm/tlbflush.h>
#include "mmu_decl.h"
/*
* This address range defaults to a value that is safe for all
* platforms which currently set CONFIG_NOT_COHERENT_CACHE. It
* can be further configured for specific applications under
* the "Advanced Setup" menu. -Matt
*/
#define CONSISTENT_BASE (IOREMAP_TOP)
#define CONSISTENT_END (CONSISTENT_BASE + CONFIG_CONSISTENT_SIZE)
#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
/*
* This is the page table (2MB) covering uncached, DMA consistent allocations
*/
static DEFINE_SPINLOCK(consistent_lock);
/*
* VM region handling support.
*
* This should become something generic, handling VM region allocations for
* vmalloc and similar (ioremap, module space, etc).
*
* I envisage vmalloc()'s supporting vm_struct becoming:
*
* struct vm_struct {
* struct vm_region region;
* unsigned long flags;
* struct page **pages;
* unsigned int nr_pages;
* unsigned long phys_addr;
* };
*
* get_vm_area() would then call vm_region_alloc with an appropriate
* struct vm_region head (eg):
*
* struct vm_region vmalloc_head = {
* .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list),
* .vm_start = VMALLOC_START,
* .vm_end = VMALLOC_END,
* };
*
* However, vmalloc_head.vm_start is variable (typically, it is dependent on
* the amount of RAM found at boot time.) I would imagine that get_vm_area()
* would have to initialise this each time prior to calling vm_region_alloc().
*/
struct ppc_vm_region {
struct list_head vm_list;
unsigned long vm_start;
unsigned long vm_end;
};
static struct ppc_vm_region consistent_head = {
.vm_list = LIST_HEAD_INIT(consistent_head.vm_list),
.vm_start = CONSISTENT_BASE,
.vm_end = CONSISTENT_END,
};
static struct ppc_vm_region *
ppc_vm_region_alloc(struct ppc_vm_region *head, size_t size, gfp_t gfp)
{
unsigned long addr = head->vm_start, end = head->vm_end - size;
unsigned long flags;
struct ppc_vm_region *c, *new;
new = kmalloc(sizeof(struct ppc_vm_region), gfp);
if (!new)
goto out;
spin_lock_irqsave(&consistent_lock, flags);
list_for_each_entry(c, &head->vm_list, vm_list) {
if ((addr + size) < addr)
goto nospc;
if ((addr + size) <= c->vm_start)
goto found;
addr = c->vm_end;
if (addr > end)
goto nospc;
}
found:
/*
* Insert this entry _before_ the one we found.
*/
list_add_tail(&new->vm_list, &c->vm_list);
new->vm_start = addr;
new->vm_end = addr + size;
spin_unlock_irqrestore(&consistent_lock, flags);
return new;
nospc:
spin_unlock_irqrestore(&consistent_lock, flags);
kfree(new);
out:
return NULL;
}
static struct ppc_vm_region *ppc_vm_region_find(struct ppc_vm_region *head, unsigned long addr)
{
struct ppc_vm_region *c;
list_for_each_entry(c, &head->vm_list, vm_list) {
if (c->vm_start == addr)
goto out;
}
c = NULL;
out:
return c;
}
/*
* Allocate DMA-coherent memory space and return both the kernel remapped
* virtual and bus address for that space.
*/
void *
__dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
{
struct page *page;
struct ppc_vm_region *c;
unsigned long order;
u64 mask = ISA_DMA_THRESHOLD, limit;
if (dev) {
mask = dev->coherent_dma_mask;
/*
* Sanity check the DMA mask - it must be non-zero, and
* must be able to be satisfied by a DMA allocation.
*/
if (mask == 0) {
dev_warn(dev, "coherent DMA mask is unset\n");
goto no_page;
}
if ((~mask) & ISA_DMA_THRESHOLD) {
dev_warn(dev, "coherent DMA mask %#llx is smaller "
"than system GFP_DMA mask %#llx\n",
mask, (unsigned long long)ISA_DMA_THRESHOLD);
goto no_page;
}
}
size = PAGE_ALIGN(size);
limit = (mask + 1) & ~mask;
if ((limit && size >= limit) ||
size >= (CONSISTENT_END - CONSISTENT_BASE)) {
printk(KERN_WARNING "coherent allocation too big (requested %#x mask %#Lx)\n",
size, mask);
return NULL;
}
order = get_order(size);
/* Might be useful if we ever have a real legacy DMA zone... */
if (mask != 0xffffffff)
gfp |= GFP_DMA;
page = alloc_pages(gfp, order);
if (!page)
goto no_page;
/*
* Invalidate any data that might be lurking in the
* kernel direct-mapped region for device DMA.
*/
{
unsigned long kaddr = (unsigned long)page_address(page);
memset(page_address(page), 0, size);
flush_dcache_range(kaddr, kaddr + size);
}
/*
* Allocate a virtual address in the consistent mapping region.
*/
c = ppc_vm_region_alloc(&consistent_head, size,
gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
if (c) {
unsigned long vaddr = c->vm_start;
struct page *end = page + (1 << order);
split_page(page, order);
/*
* Set the "dma handle"
*/
*handle = page_to_phys(page);
do {
SetPageReserved(page);
map_page(vaddr, page_to_phys(page),
pgprot_noncached(PAGE_KERNEL));
page++;
vaddr += PAGE_SIZE;
} while (size -= PAGE_SIZE);
/*
* Free the otherwise unused pages.
*/
while (page < end) {
__free_page(page);
page++;
}
return (void *)c->vm_start;
}
if (page)
__free_pages(page, order);
no_page:
return NULL;
}
EXPORT_SYMBOL(__dma_alloc_coherent);
/*
* free a page as defined by the above mapping.
*/
void __dma_free_coherent(size_t size, void *vaddr)
{
struct ppc_vm_region *c;
unsigned long flags, addr;
size = PAGE_ALIGN(size);
spin_lock_irqsave(&consistent_lock, flags);
c = ppc_vm_region_find(&consistent_head, (unsigned long)vaddr);
if (!c)
goto no_area;
if ((c->vm_end - c->vm_start) != size) {
printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
__func__, c->vm_end - c->vm_start, size);
dump_stack();
size = c->vm_end - c->vm_start;
}
addr = c->vm_start;
do {
pte_t *ptep;
unsigned long pfn;
ptep = pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(addr),
addr),
addr),
addr);
if (!pte_none(*ptep) && pte_present(*ptep)) {
pfn = pte_pfn(*ptep);
pte_clear(&init_mm, addr, ptep);
if (pfn_valid(pfn)) {
struct page *page = pfn_to_page(pfn);
ClearPageReserved(page);
__free_page(page);
}
}
addr += PAGE_SIZE;
} while (size -= PAGE_SIZE);
flush_tlb_kernel_range(c->vm_start, c->vm_end);
list_del(&c->vm_list);
spin_unlock_irqrestore(&consistent_lock, flags);
kfree(c);
return;
no_area:
spin_unlock_irqrestore(&consistent_lock, flags);
printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
__func__, vaddr);
dump_stack();
}
EXPORT_SYMBOL(__dma_free_coherent);
/*
* make an area consistent.
*/
void __dma_sync(void *vaddr, size_t size, int direction)
{
unsigned long start = (unsigned long)vaddr;
unsigned long end = start + size;
switch (direction) {
case DMA_NONE:
BUG();
case DMA_FROM_DEVICE:
/*
* invalidate only when cache-line aligned otherwise there is
* the potential for discarding uncommitted data from the cache
*/
if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1)))
flush_dcache_range(start, end);
else
invalidate_dcache_range(start, end);
break;
case DMA_TO_DEVICE: /* writeback only */
clean_dcache_range(start, end);
break;
case DMA_BIDIRECTIONAL: /* writeback and invalidate */
flush_dcache_range(start, end);
break;
}
}
EXPORT_SYMBOL(__dma_sync);
#ifdef CONFIG_HIGHMEM
/*
* __dma_sync_page() implementation for systems using highmem.
* In this case, each page of a buffer must be kmapped/kunmapped
* in order to have a virtual address for __dma_sync(). This must
* not sleep so kmap_atomic()/kunmap_atomic() are used.
*
* Note: yes, it is possible and correct to have a buffer extend
* beyond the first page.
*/
static inline void __dma_sync_page_highmem(struct page *page,
unsigned long offset, size_t size, int direction)
{
size_t seg_size = min((size_t)(PAGE_SIZE - offset), size);
size_t cur_size = seg_size;
unsigned long flags, start, seg_offset = offset;
int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE;
int seg_nr = 0;
local_irq_save(flags);
do {
start = (unsigned long)kmap_atomic(page + seg_nr,
KM_PPC_SYNC_PAGE) + seg_offset;
/* Sync this buffer segment */
__dma_sync((void *)start, seg_size, direction);
kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE);
seg_nr++;
/* Calculate next buffer segment size */
seg_size = min((size_t)PAGE_SIZE, size - cur_size);
/* Add the segment size to our running total */
cur_size += seg_size;
seg_offset = 0;
} while (seg_nr < nr_segs);
local_irq_restore(flags);
}
#endif /* CONFIG_HIGHMEM */
/*
* __dma_sync_page makes memory consistent. identical to __dma_sync, but
* takes a struct page instead of a virtual address
*/
void __dma_sync_page(struct page *page, unsigned long offset,
size_t size, int direction)
{
#ifdef CONFIG_HIGHMEM
__dma_sync_page_highmem(page, offset, size, direction);
#else
unsigned long start = (unsigned long)page_address(page) + offset;
__dma_sync((void *)start, size, direction);
#endif
}
EXPORT_SYMBOL(__dma_sync_page);

8
arch/powerpc/mm/init_32.c
View File

@ -168,12 +168,8 @@ void __init MMU_init(void)
ppc_md.progress("MMU:mapin", 0x301);
mapin_ram();
#ifdef CONFIG_HIGHMEM
ioremap_base = PKMAP_BASE;
#else
ioremap_base = 0xfe000000UL; /* for now, could be 0xfffff000 */
#endif /* CONFIG_HIGHMEM */
ioremap_bot = ioremap_base;
/* Initialize early top-down ioremap allocator */
ioremap_bot = IOREMAP_TOP;
/* Map in I/O resources */
if (ppc_md.progress)

17
arch/powerpc/mm/mem.c
View File

@ -380,6 +380,23 @@ void __init mem_init(void)
bsssize >> 10,
initsize >> 10);
#ifdef CONFIG_PPC32
pr_info("Kernel virtual memory layout:\n");
pr_info(" * 0x%08lx..0x%08lx : fixmap\n", FIXADDR_START, FIXADDR_TOP);
#ifdef CONFIG_HIGHMEM
pr_info(" * 0x%08lx..0x%08lx : highmem PTEs\n",
PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP));
#endif /* CONFIG_HIGHMEM */
#ifdef CONFIG_NOT_COHERENT_CACHE
pr_info(" * 0x%08lx..0x%08lx : consistent mem\n",
IOREMAP_TOP, IOREMAP_TOP + CONFIG_CONSISTENT_SIZE);
#endif /* CONFIG_NOT_COHERENT_CACHE */
pr_info(" * 0x%08lx..0x%08lx : early ioremap\n",
ioremap_bot, IOREMAP_TOP);
pr_info(" * 0x%08lx..0x%08lx : vmalloc & ioremap\n",
VMALLOC_START, VMALLOC_END);
#endif /* CONFIG_PPC32 */
mem_init_done = 1;
}

6
arch/powerpc/mm/mmu_context_nohash.c
View File

@ -127,12 +127,12 @@ static unsigned int steal_context_up(unsigned int id)
pr_debug("[%d] steal context %d from mm @%p\n", cpu, id, mm);
/* Mark this mm has having no context anymore */
mm->context.id = MMU_NO_CONTEXT;
/* Flush the TLB for that context */
local_flush_tlb_mm(mm);
/* Mark this mm has having no context anymore */
mm->context.id = MMU_NO_CONTEXT;
/* XXX This clear should ultimately be part of local_flush_tlb_mm */
__clear_bit(id, stale_map[cpu]);

2
arch/powerpc/mm/pgtable_32.c
View File

@ -399,8 +399,6 @@ void kernel_map_pages(struct page *page, int numpages, int enable)
#endif /* CONFIG_DEBUG_PAGEALLOC */
static int fixmaps;
unsigned long FIXADDR_TOP = (-PAGE_SIZE);
EXPORT_SYMBOL(FIXADDR_TOP);
void __set_fixmap (enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags)
{

1
arch/sh/include/asm/flat.h
View File

@ -12,7 +12,6 @@
#ifndef __ASM_SH_FLAT_H
#define __ASM_SH_FLAT_H
#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))

5
arch/sparc/include/asm/elf_64.h
View File

@ -208,8 +208,9 @@ do { unsigned long new_flags = current_thread_info()->flags; \
else \
clear_thread_flag(TIF_ABI_PENDING); \
/* flush_thread will update pgd cache */ \
if (current->personality != PER_LINUX32) \
set_personality(PER_LINUX); \
if (personality(current->personality) != PER_LINUX32) \
set_personality(PER_LINUX | \
(current->personality & (~PER_MASK))); \
} while (0)
#endif /* !(__ASM_SPARC64_ELF_H) */

2
arch/sparc/lib/csum_copy_from_user.S
View File

@ -5,7 +5,7 @@
#define EX_LD(x) \
98: x; \
.section .fixup; \
.section .fixup, "ax"; \
.align 4; \
99: retl; \
mov -1, %o0; \

2
arch/sparc/lib/csum_copy_to_user.S
View File

@ -5,7 +5,7 @@
#define EX_ST(x) \
98: x; \
.section .fixup; \
.section .fixup,"ax"; \
.align 4; \
99: retl; \
mov -1, %o0; \

7
arch/x86/boot/compressed/relocs.c
View File

@ -504,8 +504,11 @@ static void walk_relocs(void (*visit)(Elf32_Rel *rel, Elf32_Sym *sym))
if (sym->st_shndx == SHN_ABS) {
continue;
}
if (r_type == R_386_PC32) {
/* PC relative relocations don't need to be adjusted */
if (r_type == R_386_NONE || r_type == R_386_PC32) {
/*
* NONE can be ignored and and PC relative
* relocations don't need to be adjusted.
*/
}
else if (r_type == R_386_32) {
/* Visit relocations that need to be adjusted */

29
arch/x86/boot/memory.c
View File

@ -17,11 +17,6 @@
#define SMAP 0x534d4150 /* ASCII "SMAP" */
struct e820_ext_entry {
struct e820entry std;
u32 ext_flags;
} __attribute__((packed));
static int detect_memory_e820(void)
{
int count = 0;
@ -29,13 +24,21 @@ static int detect_memory_e820(void)
u32 size, id, edi;
u8 err;
struct e820entry *desc = boot_params.e820_map;
static struct e820_ext_entry buf; /* static so it is zeroed */
static struct e820entry buf; /* static so it is zeroed */
/*
* Set this here so that if the BIOS doesn't change this field
* but still doesn't change %ecx, we're still okay...
* Note: at least one BIOS is known which assumes that the
* buffer pointed to by one e820 call is the same one as
* the previous call, and only changes modified fields. Therefore,
* we use a temporary buffer and copy the results entry by entry.
*
* This routine deliberately does not try to account for
* ACPI 3+ extended attributes. This is because there are
* BIOSes in the field which report zero for the valid bit for
* all ranges, and we don't currently make any use of the
* other attribute bits. Revisit this if we see the extended
* attribute bits deployed in a meaningful way in the future.
*/
buf.ext_flags = 1;
do {
size = sizeof buf;
@ -66,13 +69,7 @@ static int detect_memory_e820(void)
break;
}
/* ACPI 3.0 added the extended flags support. If bit 0
in the extended flags is zero, we're supposed to simply
ignore the entry -- a backwards incompatible change! */
if (size > 20 && !(buf.ext_flags & 1))
continue;
*desc++ = buf.std;
*desc++ = buf;
count++;
} while (next && count < ARRAY_SIZE(boot_params.e820_map));

7
arch/x86/kernel/cpu/common.c
View File

@ -114,6 +114,13 @@ DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
} };
EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
static int __init x86_xsave_setup(char *s)
{
setup_clear_cpu_cap(X86_FEATURE_XSAVE);
return 1;
}
__setup("noxsave", x86_xsave_setup);
#ifdef CONFIG_X86_32
static int cachesize_override __cpuinitdata = -1;
static int disable_x86_serial_nr __cpuinitdata = 1;

4
arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
View File

@ -693,8 +693,8 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE &&
policy->cpuinfo.transition_latency > 20 * 1000) {
policy->cpuinfo.transition_latency = 20 * 1000;
printk_once(KERN_INFO "Capping off P-state tranision"
" latency at 20 uS\n");
printk_once(KERN_INFO
"P-state transition latency capped at 20 uS\n");
}
/* table init */

1
arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
View File

@ -168,6 +168,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
case 0x0E: /* Core */
case 0x0F: /* Core Duo */
case 0x16: /* Celeron Core */
case 0x1C: /* Atom */
p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE);
case 0x0D: /* Pentium M (Dothan) */

Some files were not shown because too many files have changed in this diff Show More