dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

Merge /spare/repo/linux-2.6/

This commit is contained in:
Jeff Garzik 2005-08-29 19:10:39 -04:00
parent 83bbecc905 8f3d17fb7b
commit 739cdbf1d8
462 changed files with 15667 additions and 8144 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
CREDITS
View File

@ -2423,8 +2423,7 @@ S: Toronto, Ontario
S: Canada
N: Zwane Mwaikambo
E: zwane@linuxpower.ca
W: http://function.linuxpower.ca
E: zwane@arm.linux.org.uk
D: Various driver hacking
D: Lowlevel x86 kernel hacking
D: General debugging

288
Documentation/networking/phy.txt Normal file
View File

@ -0,0 +1,288 @@
-------
PHY Abstraction Layer
(Updated 2005-07-21)
Purpose
Most network devices consist of set of registers which provide an interface
to a MAC layer, which communicates with the physical connection through a
PHY. The PHY concerns itself with negotiating link parameters with the link
partner on the other side of the network connection (typically, an ethernet
cable), and provides a register interface to allow drivers to determine what
settings were chosen, and to configure what settings are allowed.
While these devices are distinct from the network devices, and conform to a
standard layout for the registers, it has been common practice to integrate
the PHY management code with the network driver. This has resulted in large
amounts of redundant code. Also, on embedded systems with multiple (and
sometimes quite different) ethernet controllers connected to the same
management bus, it is difficult to ensure safe use of the bus.
Since the PHYs are devices, and the management busses through which they are
accessed are, in fact, busses, the PHY Abstraction Layer treats them as such.
In doing so, it has these goals:
1) Increase code-reuse
2) Increase overall code-maintainability
3) Speed development time for new network drivers, and for new systems
Basically, this layer is meant to provide an interface to PHY devices which
allows network driver writers to write as little code as possible, while
still providing a full feature set.
The MDIO bus
Most network devices are connected to a PHY by means of a management bus.
Different devices use different busses (though some share common interfaces).
In order to take advantage of the PAL, each bus interface needs to be
registered as a distinct device.
1) read and write functions must be implemented. Their prototypes are:
int write(struct mii_bus *bus, int mii_id, int regnum, u16 value);
int read(struct mii_bus *bus, int mii_id, int regnum);
mii_id is the address on the bus for the PHY, and regnum is the register
number. These functions are guaranteed not to be called from interrupt
time, so it is safe for them to block, waiting for an interrupt to signal
the operation is complete
2) A reset function is necessary. This is used to return the bus to an
initialized state.
3) A probe function is needed. This function should set up anything the bus
driver needs, setup the mii_bus structure, and register with the PAL using
mdiobus_register. Similarly, there's a remove function to undo all of
that (use mdiobus_unregister).
4) Like any driver, the device_driver structure must be configured, and init
exit functions are used to register the driver.
5) The bus must also be declared somewhere as a device, and registered.
As an example for how one driver implemented an mdio bus driver, see
drivers/net/gianfar_mii.c and arch/ppc/syslib/mpc85xx_devices.c
Connecting to a PHY
Sometime during startup, the network driver needs to establish a connection
between the PHY device, and the network device. At this time, the PHY's bus
and drivers need to all have been loaded, so it is ready for the connection.
At this point, there are several ways to connect to the PHY:
1) The PAL handles everything, and only calls the network driver when
the link state changes, so it can react.
2) The PAL handles everything except interrupts (usually because the
controller has the interrupt registers).
3) The PAL handles everything, but checks in with the driver every second,
allowing the network driver to react first to any changes before the PAL
does.
4) The PAL serves only as a library of functions, with the network device
manually calling functions to update status, and configure the PHY
Letting the PHY Abstraction Layer do Everything
If you choose option 1 (The hope is that every driver can, but to still be
useful to drivers that can't), connecting to the PHY is simple:
First, you need a function to react to changes in the link state. This
function follows this protocol:
static void adjust_link(struct net_device *dev);
Next, you need to know the device name of the PHY connected to this device.
The name will look something like, "phy0:0", where the first number is the
bus id, and the second is the PHY's address on that bus.
Now, to connect, just call this function:
phydev = phy_connect(dev, phy_name, &adjust_link, flags);
phydev is a pointer to the phy_device structure which represents the PHY. If
phy_connect is successful, it will return the pointer. dev, here, is the
pointer to your net_device. Once done, this function will have started the
PHY's software state machine, and registered for the PHY's interrupt, if it
has one. The phydev structure will be populated with information about the
current state, though the PHY will not yet be truly operational at this
point.
flags is a u32 which can optionally contain phy-specific flags.
This is useful if the system has put hardware restrictions on
the PHY/controller, of which the PHY needs to be aware.
Now just make sure that phydev->supported and phydev->advertising have any
values pruned from them which don't make sense for your controller (a 10/100
controller may be connected to a gigabit capable PHY, so you would need to
mask off SUPPORTED_1000baseT*). See include/linux/ethtool.h for definitions
for these bitfields. Note that you should not SET any bits, or the PHY may
get put into an unsupported state.
Lastly, once the controller is ready to handle network traffic, you call
phy_start(phydev). This tells the PAL that you are ready, and configures the
PHY to connect to the network. If you want to handle your own interrupts,
just set phydev->irq to PHY_IGNORE_INTERRUPT before you call phy_start.
Similarly, if you don't want to use interrupts, set phydev->irq to PHY_POLL.
When you want to disconnect from the network (even if just briefly), you call
phy_stop(phydev).
Keeping Close Tabs on the PAL
It is possible that the PAL's built-in state machine needs a little help to
keep your network device and the PHY properly in sync. If so, you can
register a helper function when connecting to the PHY, which will be called
every second before the state machine reacts to any changes. To do this, you
need to manually call phy_attach() and phy_prepare_link(), and then call
phy_start_machine() with the second argument set to point to your special
handler.
Currently there are no examples of how to use this functionality, and testing
on it has been limited because the author does not have any drivers which use
it (they all use option 1). So Caveat Emptor.
Doing it all yourself
There's a remote chance that the PAL's built-in state machine cannot track
the complex interactions between the PHY and your network device. If this is
so, you can simply call phy_attach(), and not call phy_start_machine or
phy_prepare_link(). This will mean that phydev->state is entirely yours to
handle (phy_start and phy_stop toggle between some of the states, so you
might need to avoid them).
An effort has been made to make sure that useful functionality can be
accessed without the state-machine running, and most of these functions are
descended from functions which did not interact with a complex state-machine.
However, again, no effort has been made so far to test running without the
state machine, so tryer beware.
Here is a brief rundown of the functions:
int phy_read(struct phy_device *phydev, u16 regnum);
int phy_write(struct phy_device *phydev, u16 regnum, u16 val);
Simple read/write primitives. They invoke the bus's read/write function
pointers.
void phy_print_status(struct phy_device *phydev);
A convenience function to print out the PHY status neatly.
int phy_clear_interrupt(struct phy_device *phydev);
int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
Clear the PHY's interrupt, and configure which ones are allowed,
respectively. Currently only supports all on, or all off.
int phy_enable_interrupts(struct phy_device *phydev);
int phy_disable_interrupts(struct phy_device *phydev);
Functions which enable/disable PHY interrupts, clearing them
before and after, respectively.
int phy_start_interrupts(struct phy_device *phydev);
int phy_stop_interrupts(struct phy_device *phydev);
Requests the IRQ for the PHY interrupts, then enables them for
start, or disables then frees them for stop.
struct phy_device * phy_attach(struct net_device *dev, const char *phy_id,
u32 flags);
Attaches a network device to a particular PHY, binding the PHY to a generic
driver if none was found during bus initialization. Passes in
any phy-specific flags as needed.
int phy_start_aneg(struct phy_device *phydev);
Using variables inside the phydev structure, either configures advertising
and resets autonegotiation, or disables autonegotiation, and configures
forced settings.
static inline int phy_read_status(struct phy_device *phydev);
Fills the phydev structure with up-to-date information about the current
settings in the PHY.
void phy_sanitize_settings(struct phy_device *phydev)
Resolves differences between currently desired settings, and
supported settings for the given PHY device. Does not make
the changes in the hardware, though.
int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
Ethtool convenience functions.
int phy_mii_ioctl(struct phy_device *phydev,
struct mii_ioctl_data *mii_data, int cmd);
The MII ioctl. Note that this function will completely screw up the state
machine if you write registers like BMCR, BMSR, ADVERTISE, etc. Best to
use this only to write registers which are not standard, and don't set off
a renegotiation.
PHY Device Drivers
With the PHY Abstraction Layer, adding support for new PHYs is
quite easy. In some cases, no work is required at all! However,
many PHYs require a little hand-holding to get up-and-running.
Generic PHY driver
If the desired PHY doesn't have any errata, quirks, or special
features you want to support, then it may be best to not add
support, and let the PHY Abstraction Layer's Generic PHY Driver
do all of the work.
Writing a PHY driver
If you do need to write a PHY driver, the first thing to do is
make sure it can be matched with an appropriate PHY device.
This is done during bus initialization by reading the device's
UID (stored in registers 2 and 3), then comparing it to each
driver's phy_id field by ANDing it with each driver's
phy_id_mask field. Also, it needs a name. Here's an example:
static struct phy_driver dm9161_driver = {
.phy_id = 0x0181b880,
.name = "Davicom DM9161E",
.phy_id_mask = 0x0ffffff0,
...
}
Next, you need to specify what features (speed, duplex, autoneg,
etc) your PHY device and driver support. Most PHYs support
PHY_BASIC_FEATURES, but you can look in include/mii.h for other
features.
Each driver consists of a number of function pointers:
config_init: configures PHY into a sane state after a reset.
For instance, a Davicom PHY requires descrambling disabled.
probe: Does any setup needed by the driver
suspend/resume: power management
config_aneg: Changes the speed/duplex/negotiation settings
read_status: Reads the current speed/duplex/negotiation settings
ack_interrupt: Clear a pending interrupt
config_intr: Enable or disable interrupts
remove: Does any driver take-down
Of these, only config_aneg and read_status are required to be
assigned by the driver code. The rest are optional. Also, it is
preferred to use the generic phy driver's versions of these two
functions if at all possible: genphy_read_status and
genphy_config_aneg. If this is not possible, it is likely that
you only need to perform some actions before and after invoking
these functions, and so your functions will wrap the generic
ones.
Feel free to look at the Marvell, Cicada, and Davicom drivers in
drivers/net/phy/ for examples (the lxt and qsemi drivers have
not been tested as of this writing)

4
MAINTAINERS
View File

@ -1739,7 +1739,7 @@ S: Maintained
OPL3-SA2, SA3, and SAx DRIVER
P: Zwane Mwaikambo
M: zwane@commfireservices.com
M: zwane@arm.linux.org.uk
L: linux-sound@vger.kernel.org
S: Maintained
@ -1995,7 +1995,7 @@ S: Maintained
SC1200 WDT DRIVER
P: Zwane Mwaikambo
M: zwane@commfireservices.com
M: zwane@arm.linux.org.uk
S: Maintained
SCHEDULER

4
Makefile
View File

@ -1,8 +1,8 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 13
EXTRAVERSION =-rc6
NAME=Woozy Numbat
EXTRAVERSION =
NAME=Affluent Albatross
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"

2
arch/alpha/Kconfig
View File

@ -522,7 +522,7 @@ source "mm/Kconfig"
config NUMA
bool "NUMA Support (EXPERIMENTAL)"
depends on DISCONTIGMEM
depends on DISCONTIGMEM && BROKEN
help
Say Y to compile the kernel to support NUMA (Non-Uniform Memory
Access). This option is for configuring high-end multiprocessor

11
arch/alpha/kernel/signal.c
View File

@ -566,13 +566,12 @@ handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info,
if (ka->sa.sa_flags & SA_RESETHAND)
ka->sa.sa_handler = SIG_DFL;
if (!(ka->sa.sa_flags & SA_NODEFER)) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked,sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
static inline void

6
arch/alpha/kernel/smp.c
View File

@ -1036,7 +1036,7 @@ debug_spin_lock(spinlock_t * lock, const char *base_file, int line_no)
" br 1b\n"
".previous"
: "=r" (tmp), "=m" (lock->lock), "=r" (stuck)
: "1" (lock->lock), "2" (stuck) : "memory");
: "m" (lock->lock), "2" (stuck) : "memory");
if (stuck < 0) {
printk(KERN_WARNING
@ -1115,7 +1115,7 @@ void _raw_write_lock(rwlock_t * lock)
".previous"
: "=m" (*(volatile int *)lock), "=&r" (regx), "=&r" (regy),
"=&r" (stuck_lock), "=&r" (stuck_reader)
: "0" (*(volatile int *)lock), "3" (stuck_lock), "4" (stuck_reader) : "memory");
: "m" (*(volatile int *)lock), "3" (stuck_lock), "4" (stuck_reader) : "memory");
if (stuck_lock < 0) {
printk(KERN_WARNING "write_lock stuck at %p\n", inline_pc);
@ -1153,7 +1153,7 @@ void _raw_read_lock(rwlock_t * lock)
" br 1b\n"
".previous"
: "=m" (*(volatile int *)lock), "=&r" (regx), "=&r" (stuck_lock)
: "0" (*(volatile int *)lock), "2" (stuck_lock) : "memory");
: "m" (*(volatile int *)lock), "2" (stuck_lock) : "memory");
if (stuck_lock < 0) {
printk(KERN_WARNING "read_lock stuck at %p\n", inline_pc);

6
arch/alpha/oprofile/common.c
View File

@ -65,7 +65,7 @@ op_axp_setup(void)
model->reg_setup(&reg, ctr, &sys);
/* Configure the registers on all cpus. */
smp_call_function(model->cpu_setup, &reg, 0, 1);
(void)smp_call_function(model->cpu_setup, &reg, 0, 1);
model->cpu_setup(&reg);
return 0;
}
@ -86,7 +86,7 @@ op_axp_cpu_start(void *dummy)
static int
op_axp_start(void)
{
smp_call_function(op_axp_cpu_start, NULL, 0, 1);
(void)smp_call_function(op_axp_cpu_start, NULL, 0, 1);
op_axp_cpu_start(NULL);
return 0;
}
@ -101,7 +101,7 @@ op_axp_cpu_stop(void *dummy)
static void
op_axp_stop(void)
{
smp_call_function(op_axp_cpu_stop, NULL, 0, 1);
(void)smp_call_function(op_axp_cpu_stop, NULL, 0, 1);
op_axp_cpu_stop(NULL);
}

41
arch/arm/Kconfig
View File

@ -310,7 +310,7 @@ menu "Kernel Features"
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
depends on EXPERIMENTAL #&& n
depends on EXPERIMENTAL && BROKEN #&& n
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
@ -635,10 +635,6 @@ config PM
and the Battery Powered Linux mini-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that, even if you say N here, Linux on the x86 architecture
will issue the hlt instruction if nothing is to be done, thereby
sending the processor to sleep and saving power.
config APM
tristate "Advanced Power Management Emulation"
depends on PM
@ -650,12 +646,6 @@ config APM
battery status information, and user-space programs will receive
notification of APM "events" (e.g. battery status change).
If you select "Y" here, you can disable actual use of the APM
BIOS by passing the "apm=off" option to the kernel at boot time.
Note that the APM support is almost completely disabled for
machines with more than one CPU.
In order to use APM, you will need supporting software. For location
and more information, read <file:Documentation/pm.txt> and the
Battery Powered Linux mini-HOWTO, available from
@ -665,39 +655,12 @@ config APM
manpage ("man 8 hdparm") for that), and it doesn't turn off
VESA-compliant "green" monitors.
This driver does not support the TI 4000M TravelMate and the ACER
486/DX4/75 because they don't have compliant BIOSes. Many "green"
desktop machines also don't have compliant BIOSes, and this driver
may cause those machines to panic during the boot phase.
Generally, if you don't have a battery in your machine, there isn't
much point in using this driver and you should say N. If you get
random kernel OOPSes or reboots that don't seem to be related to
anything, try disabling/enabling this option (or disabling/enabling
APM in your BIOS).
Some other things you should try when experiencing seemingly random,
"weird" problems:
1) make sure that you have enough swap space and that it is
enabled.
2) pass the "no-hlt" option to the kernel
3) switch on floating point emulation in the kernel and pass
the "no387" option to the kernel
4) pass the "floppy=nodma" option to the kernel
5) pass the "mem=4M" option to the kernel (thereby disabling
all but the first 4 MB of RAM)
6) make sure that the CPU is not over clocked.
7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
8) disable the cache from your BIOS settings
9) install a fan for the video card or exchange video RAM
10) install a better fan for the CPU
11) exchange RAM chips
12) exchange the motherboard.
To compile this driver as a module, choose M here: the
module will be called apm.
endmenu
source "net/Kconfig"
@ -752,6 +715,8 @@ source "drivers/hwmon/Kconfig"
source "drivers/misc/Kconfig"
source "drivers/mfd/Kconfig"
source "drivers/media/Kconfig"
source "drivers/video/Kconfig"

3
arch/arm/common/Kconfig
View File

@ -1,6 +1,9 @@
config ICST525
bool
config ARM_GIC
bool
config ICST307
bool

1
arch/arm/common/Makefile
View File

@ -4,6 +4,7 @@
obj-y += rtctime.o
obj-$(CONFIG_ARM_AMBA) += amba.o
obj-$(CONFIG_ARM_GIC) += gic.o
obj-$(CONFIG_ICST525) += icst525.o
obj-$(CONFIG_ICST307) += icst307.o
obj-$(CONFIG_SA1111) += sa1111.o

166
arch/arm/common/gic.c Normal file
View File

@ -0,0 +1,166 @@
/*
* linux/arch/arm/common/gic.c
*
* Copyright (C) 2002 ARM Limited, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Interrupt architecture for the GIC:
*
* o There is one Interrupt Distributor, which receives interrupts
* from system devices and sends them to the Interrupt Controllers.
*
* o There is one CPU Interface per CPU, which sends interrupts sent
* by the Distributor, and interrupts generated locally, to the
* associated CPU.
*
* Note that IRQs 0-31 are special - they are local to each CPU.
* As such, the enable set/clear, pending set/clear and active bit
* registers are banked per-cpu for these sources.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/smp.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/mach/irq.h>
#include <asm/hardware/gic.h>
static void __iomem *gic_dist_base;
static void __iomem *gic_cpu_base;
/*
* Routines to acknowledge, disable and enable interrupts
*
* Linux assumes that when we're done with an interrupt we need to
* unmask it, in the same way we need to unmask an interrupt when
* we first enable it.
*
* The GIC has a seperate notion of "end of interrupt" to re-enable
* an interrupt after handling, in order to support hardware
* prioritisation.
*
* We can make the GIC behave in the way that Linux expects by making
* our "acknowledge" routine disable the interrupt, then mark it as
* complete.
*/
static void gic_ack_irq(unsigned int irq)
{
u32 mask = 1 << (irq % 32);
writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
writel(irq, gic_cpu_base + GIC_CPU_EOI);
}
static void gic_mask_irq(unsigned int irq)
{
u32 mask = 1 << (irq % 32);
writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
}
static void gic_unmask_irq(unsigned int irq)
{
u32 mask = 1 << (irq % 32);
writel(mask, gic_dist_base + GIC_DIST_ENABLE_SET + (irq / 32) * 4);
}
static void gic_set_cpu(struct irqdesc *desc, unsigned int irq, unsigned int cpu)
{
void __iomem *reg = gic_dist_base + GIC_DIST_TARGET + (irq & ~3);
unsigned int shift = (irq % 4) * 8;
u32 val;
val = readl(reg) & ~(0xff << shift);
val |= 1 << (cpu + shift);
writel(val, reg);
}
static struct irqchip gic_chip = {
.ack = gic_ack_irq,
.mask = gic_mask_irq,
.unmask = gic_unmask_irq,
#ifdef CONFIG_SMP
.set_cpu = gic_set_cpu,
#endif
};
void __init gic_dist_init(void __iomem *base)
{
unsigned int max_irq, i;
u32 cpumask = 1 << smp_processor_id();
cpumask |= cpumask << 8;
cpumask |= cpumask << 16;
gic_dist_base = base;
writel(0, base + GIC_DIST_CTRL);
/*
* Find out how many interrupts are supported.
*/
max_irq = readl(base + GIC_DIST_CTR) & 0x1f;
max_irq = (max_irq + 1) * 32;
/*
* The GIC only supports up to 1020 interrupt sources.
* Limit this to either the architected maximum, or the
* platform maximum.
*/
if (max_irq > max(1020, NR_IRQS))
max_irq = max(1020, NR_IRQS);
/*
* Set all global interrupts to be level triggered, active low.
*/
for (i = 32; i < max_irq; i += 16)
writel(0, base + GIC_DIST_CONFIG + i * 4 / 16);
/*
* Set all global interrupts to this CPU only.
*/
for (i = 32; i < max_irq; i += 4)
writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
/*
* Set priority on all interrupts.
*/
for (i = 0; i < max_irq; i += 4)
writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
/*
* Disable all interrupts.
*/
for (i = 0; i < max_irq; i += 32)
writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
/*
* Setup the Linux IRQ subsystem.
*/
for (i = 29; i < max_irq; i++) {
set_irq_chip(i, &gic_chip);
set_irq_handler(i, do_level_IRQ);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
writel(1, base + GIC_DIST_CTRL);
}
void __cpuinit gic_cpu_init(void __iomem *base)
{
gic_cpu_base = base;
writel(0xf0, base + GIC_CPU_PRIMASK);
writel(1, base + GIC_CPU_CTRL);
}
#ifdef CONFIG_SMP
void gic_raise_softirq(cpumask_t cpumask, unsigned int irq)
{
unsigned long map = *cpus_addr(cpumask);
writel(map << 16 | irq, gic_dist_base + GIC_DIST_SOFTINT);
}
#endif

6
arch/arm/kernel/calls.S
View File

@ -327,6 +327,12 @@ __syscall_start:
/* 310 */ .long sys_request_key
.long sys_keyctl
.long sys_semtimedop
/* vserver */ .long sys_ni_syscall
.long sys_ioprio_set
/* 315 */ .long sys_ioprio_get
.long sys_inotify_init
.long sys_inotify_add_watch
.long sys_inotify_rm_watch
__syscall_end:
.rept NR_syscalls - (__syscall_end - __syscall_start) / 4

5
arch/arm/kernel/signal.c
View File

@ -658,11 +658,12 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
/*
* Block the signal if we were unsuccessful.
*/
if (ret != 0 || !(ka->sa.sa_flags & SA_NODEFER)) {
if (ret != 0) {
spin_lock_irq(&tsk->sighand->siglock);
sigorsets(&tsk->blocked, &tsk->blocked,
&ka->sa.sa_mask);
sigaddset(&tsk->blocked, sig);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&tsk->blocked, sig);
recalc_sigpending();
spin_unlock_irq(&tsk->sighand->siglock);
}

2
arch/arm/kernel/traps.c
View File

@ -617,7 +617,7 @@ baddataabort(int code, unsigned long instr, struct pt_regs *regs)
notify_die("unknown data abort code", regs, &info, instr, 0);
}
volatile void __bug(const char *file, int line, void *data)
void __attribute__((noreturn)) __bug(const char *file, int line, void *data)
{
printk(KERN_CRIT"kernel BUG at %s:%d!", file, line);
if (data)

2
arch/arm/mach-ixp4xx/coyote-setup.c
View File

@ -36,7 +36,7 @@ static struct flash_platform_data coyote_flash_data = {
static struct resource coyote_flash_resource = {
.start = COYOTE_FLASH_BASE,
.end = COYOTE_FLASH_BASE + COYOTE_FLASH_SIZE,
.end = COYOTE_FLASH_BASE + COYOTE_FLASH_SIZE - 1,
.flags = IORESOURCE_MEM,
};

2
arch/arm/mach-ixp4xx/gtwx5715-setup.c
View File

@ -114,7 +114,7 @@ static struct flash_platform_data gtwx5715_flash_data = {
static struct resource gtwx5715_flash_resource = {
.start = GTWX5715_FLASH_BASE,
.end = GTWX5715_FLASH_BASE + GTWX5715_FLASH_SIZE,
.end = GTWX5715_FLASH_BASE + GTWX5715_FLASH_SIZE - 1,
.flags = IORESOURCE_MEM,
};

2
arch/arm/mach-ixp4xx/ixdp425-setup.c
View File

@ -36,7 +36,7 @@ static struct flash_platform_data ixdp425_flash_data = {
static struct resource ixdp425_flash_resource = {
.start = IXDP425_FLASH_BASE,
.end = IXDP425_FLASH_BASE + IXDP425_FLASH_SIZE,
.end = IXDP425_FLASH_BASE + IXDP425_FLASH_SIZE - 1,
.flags = IORESOURCE_MEM,
};

4
arch/arm/mach-s3c2410/s3c2410.c
View File

@ -18,6 +18,7 @@
* 28-Sep-2004 BJD Updates for new serial port bits
* 04-Nov-2004 BJD Updated UART configuration process
* 10-Jan-2005 BJD Removed s3c2410_clock_tick_rate
* 13-Aug-2005 DA Removed UART from initial I/O mappings
*/
#include <linux/kernel.h>
@ -49,10 +50,9 @@ static struct map_desc s3c2410_iodesc[] __initdata = {
IODESC_ENT(USBHOST),
IODESC_ENT(CLKPWR),
IODESC_ENT(LCD),
IODESC_ENT(UART),
IODESC_ENT(TIMER),
IODESC_ENT(ADC),
IODESC_ENT(WATCHDOG)
IODESC_ENT(WATCHDOG),
};
static struct resource s3c_uart0_resource[] = {

7
arch/arm/mach-sa1100/assabet.c
View File

@ -35,6 +35,7 @@
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
#include <asm/arch/assabet.h>
#include <asm/arch/mcp.h>
#include "generic.h"
@ -198,6 +199,11 @@ static struct irda_platform_data assabet_irda_data = {
.set_speed = assabet_irda_set_speed,
};
static struct mcp_plat_data assabet_mcp_data = {
.mccr0 = MCCR0_ADM,
.sclk_rate = 11981000,
};
static void __init assabet_init(void)
{
/*
@ -246,6 +252,7 @@ static void __init assabet_init(void)
sa11x0_set_flash_data(&assabet_flash_data, assabet_flash_resources,
ARRAY_SIZE(assabet_flash_resources));
sa11x0_set_irda_data(&assabet_irda_data);
sa11x0_set_mcp_data(&assabet_mcp_data);
}
/*

7
arch/arm/mach-sa1100/cerf.c
View File

@ -29,6 +29,7 @@
#include <asm/mach/serial_sa1100.h>
#include <asm/arch/cerf.h>
#include <asm/arch/mcp.h>
#include "generic.h"
static struct resource cerfuart2_resources[] = {
@ -116,10 +117,16 @@ static void __init cerf_map_io(void)
GPDR |= CERF_GPIO_CF_RESET;
}
static struct mcp_plat_data cerf_mcp_data = {
.mccr0 = MCCR0_ADM,
.sclk_rate = 11981000,
};
static void __init cerf_init(void)
{
platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices));
sa11x0_set_flash_data(&cerf_flash_data, &cerf_flash_resource, 1);
sa11x0_set_mcp_data(&cerf_mcp_data);
}
MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")

5
arch/arm/mach-sa1100/generic.c
View File

@ -221,6 +221,11 @@ static struct platform_device sa11x0mcp_device = {
.resource = sa11x0mcp_resources,
};
void sa11x0_set_mcp_data(struct mcp_plat_data *data)
{
sa11x0mcp_device.dev.platform_data = data;
}
static struct resource sa11x0ssp_resources[] = {
[0] = {
.start = 0x80070000,

3
arch/arm/mach-sa1100/generic.h
View File

@ -34,5 +34,8 @@ struct resource;
extern void sa11x0_set_flash_data(struct flash_platform_data *flash,
struct resource *res, int nr);
struct sa11x0_ssp_plat_ops;
extern void sa11x0_set_ssp_data(struct sa11x0_ssp_plat_ops *ops);
struct irda_platform_data;
void sa11x0_set_irda_data(struct irda_platform_data *irda);

12
arch/arm/mach-sa1100/lart.c
View File

@ -13,12 +13,23 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
#include <asm/arch/mcp.h>
#include "generic.h"
#warning "include/asm/arch-sa1100/ide.h needs fixing for lart"
static struct mcp_plat_data lart_mcp_data = {
.mccr0 = MCCR0_ADM,
.sclk_rate = 11981000,
};
static void __init lart_init(void)
{
sa11x0_set_mcp_data(&lart_mcp_data);
}
static struct map_desc lart_io_desc[] __initdata = {
/* virtual physical length type */
{ 0xe8000000, 0x00000000, 0x00400000, MT_DEVICE }, /* main flash memory */
@ -47,5 +58,6 @@ MACHINE_START(LART, "LART")
.boot_params = 0xc0000100,
.map_io = lart_map_io,
.init_irq = sa1100_init_irq,
.init_machine = lart_init,
.timer = &sa1100_timer,
MACHINE_END

7
arch/arm/mach-sa1100/shannon.c
View File

@ -18,6 +18,7 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
#include <asm/arch/mcp.h>
#include <asm/arch/shannon.h>
#include "generic.h"
@ -52,9 +53,15 @@ static struct resource shannon_flash_resource = {
.flags = IORESOURCE_MEM,
};
static struct mcp_plat_data shannon_mcp_data = {
.mccr0 = MCCR0_ADM,
.sclk_rate = 11981000,
};
static void __init shannon_init(void)
{
sa11x0_set_flash_data(&shannon_flash_data, &shannon_flash_resource, 1);
sa11x0_set_mcp_data(&shannon_mcp_data);
}
static void __init shannon_map_io(void)

7
arch/arm/mach-sa1100/simpad.c
View File

@ -23,6 +23,7 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
#include <asm/arch/mcp.h>
#include <asm/arch/simpad.h>
#include <linux/serial_core.h>
@ -123,6 +124,11 @@ static struct resource simpad_flash_resources [] = {
}
};
static struct mcp_plat_data simpad_mcp_data = {
.mccr0 = MCCR0_ADM,
.sclk_rate = 11981000,
};
static void __init simpad_map_io(void)
@ -157,6 +163,7 @@ static void __init simpad_map_io(void)
sa11x0_set_flash_data(&simpad_flash_data, simpad_flash_resources,
ARRAY_SIZE(simpad_flash_resources));
sa11x0_set_mcp_data(&simpad_mcp_data);
}
static void simpad_power_off(void)

2
arch/arm/mm/Kconfig
View File

@ -384,7 +384,7 @@ config CPU_DCACHE_DISABLE
config CPU_DCACHE_WRITETHROUGH
bool "Force write through D-cache"
depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020) && !CPU_DISABLE_DCACHE
depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020) && !CPU_DCACHE_DISABLE
default y if CPU_ARM925T
help
Say Y here to use the data cache in writethrough mode. Unless you

2
arch/arm/mm/proc-v6.S
View File

@ -105,7 +105,7 @@ ENTRY(cpu_v6_dcache_clean_area)
ENTRY(cpu_v6_switch_mm)
mov r2, #0
ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
mcr p15, 0, r2, c7, c10, 4 @ drain write buffer
mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
mcr p15, 0, r1, c13, c0, 1 @ set context ID

6
arch/arm/nwfpe/fpopcode.h
View File

@ -370,20 +370,20 @@ TABLE 5
#define getRoundingMode(opcode) ((opcode & MASK_ROUNDING_MODE) >> 5)
#ifdef CONFIG_FPE_NWFPE_XP
static inline const floatx80 getExtendedConstant(const unsigned int nIndex)
static inline __attribute_pure__ floatx80 getExtendedConstant(const unsigned int nIndex)
{
extern const floatx80 floatx80Constant[];
return floatx80Constant[nIndex];
}
#endif
static inline const float64 getDoubleConstant(const unsigned int nIndex)
static inline __attribute_pure__ float64 getDoubleConstant(const unsigned int nIndex)
{
extern const float64 float64Constant[];
return float64Constant[nIndex];
}
static inline const float32 getSingleConstant(const unsigned int nIndex)
static inline __attribute_pure__ float32 getSingleConstant(const unsigned int nIndex)
{
extern const float32 float32Constant[];
return float32Constant[nIndex];

34
arch/arm/nwfpe/softfloat.c
View File

@ -1602,9 +1602,7 @@ flag float32_le_quiet( float32 a, float32 b )
if ( ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
|| ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
) {
if ( float32_is_signaling_nan( a ) || float32_is_signaling_nan( b ) ) {
float_raise( float_flag_invalid );
}
/* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloat32Sign( a );
@ -1629,9 +1627,7 @@ flag float32_lt_quiet( float32 a, float32 b )
if ( ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
|| ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
) {
if ( float32_is_signaling_nan( a ) || float32_is_signaling_nan( b ) ) {
float_raise( float_flag_invalid );
}
/* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloat32Sign( a );
@ -2493,9 +2489,7 @@ flag float64_le_quiet( float64 a, float64 b )
if ( ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
|| ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
) {
if ( float64_is_signaling_nan( a ) || float64_is_signaling_nan( b ) ) {
float_raise( float_flag_invalid );
}
/* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloat64Sign( a );
@ -2520,9 +2514,7 @@ flag float64_lt_quiet( float64 a, float64 b )
if ( ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
|| ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
) {
if ( float64_is_signaling_nan( a ) || float64_is_signaling_nan( b ) ) {
float_raise( float_flag_invalid );
}
/* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloat64Sign( a );
@ -3256,7 +3248,7 @@ flag floatx80_eq( floatx80 a, floatx80 b )
) {
if ( floatx80_is_signaling_nan( a )
|| floatx80_is_signaling_nan( b ) ) {
roundData->exception |= float_flag_invalid;
float_raise( float_flag_invalid );
}
return 0;
}
@ -3286,7 +3278,7 @@ flag floatx80_le( floatx80 a, floatx80 b )
|| ( ( extractFloatx80Exp( b ) == 0x7FFF )
&& (bits64) ( extractFloatx80Frac( b )<<1 ) )
) {
roundData->exception |= float_flag_invalid;
float_raise( float_flag_invalid );
return 0;
}
aSign = extractFloatx80Sign( a );
@ -3320,7 +3312,7 @@ flag floatx80_lt( floatx80 a, floatx80 b )
|| ( ( extractFloatx80Exp( b ) == 0x7FFF )
&& (bits64) ( extractFloatx80Frac( b )<<1 ) )
) {
roundData->exception |= float_flag_invalid;
float_raise( float_flag_invalid );
return 0;
}
aSign = extractFloatx80Sign( a );
@ -3353,7 +3345,7 @@ flag floatx80_eq_signaling( floatx80 a, floatx80 b )
|| ( ( extractFloatx80Exp( b ) == 0x7FFF )
&& (bits64) ( extractFloatx80Frac( b )<<1 ) )
) {
roundData->exception |= float_flag_invalid;
float_raise( float_flag_invalid );
return 0;
}
return
@ -3382,10 +3374,7 @@ flag floatx80_le_quiet( floatx80 a, floatx80 b )
|| ( ( extractFloatx80Exp( b ) == 0x7FFF )
&& (bits64) ( extractFloatx80Frac( b )<<1 ) )
) {
if ( floatx80_is_signaling_nan( a )
|| floatx80_is_signaling_nan( b ) ) {
roundData->exception |= float_flag_invalid;
}
/* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloatx80Sign( a );
@ -3419,10 +3408,7 @@ flag floatx80_lt_quiet( floatx80 a, floatx80 b )
|| ( ( extractFloatx80Exp( b ) == 0x7FFF )
&& (bits64) ( extractFloatx80Frac( b )<<1 ) )
) {
if ( floatx80_is_signaling_nan( a )
|| floatx80_is_signaling_nan( b ) ) {
roundData->exception |= float_flag_invalid;
}
/* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloatx80Sign( a );

13
arch/arm26/kernel/signal.c
View File

@ -454,14 +454,13 @@ handle_signal(unsigned long sig, siginfo_t *info, sigset_t *oldset,
if (ka->sa.sa_flags & SA_ONESHOT)
ka->sa.sa_handler = SIG_DFL;
if (!(ka->sa.sa_flags & SA_NODEFER)) {
spin_lock_irq(&tsk->sighand->siglock);
sigorsets(&tsk->blocked, &tsk->blocked,
&ka->sa.sa_mask);
spin_lock_irq(&tsk->sighand->siglock);
sigorsets(&tsk->blocked, &tsk->blocked,
&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&tsk->blocked, sig);
recalc_sigpending();
spin_unlock_irq(&tsk->sighand->siglock);
}
recalc_sigpending();
spin_unlock_irq(&tsk->sighand->siglock);
return;
}

11
arch/cris/arch-v10/kernel/signal.c
View File

@ -517,13 +517,12 @@ handle_signal(int canrestart, unsigned long sig,
if (ka->sa.sa_flags & SA_ONESHOT)
ka->sa.sa_handler = SIG_DFL;
if (!(ka->sa.sa_flags & SA_NODEFER)) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked,sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
/*

11
arch/cris/arch-v32/kernel/signal.c
View File

@ -568,13 +568,12 @@ handle_signal(int canrestart, unsigned long sig,
if (ka->sa.sa_flags & SA_ONESHOT)
ka->sa.sa_handler = SIG_DFL;
if (!(ka->sa.sa_flags & SA_NODEFER)) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked,sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
/*

11
arch/frv/kernel/signal.c
View File

@ -506,13 +506,12 @@ static void handle_signal(unsigned long sig, siginfo_t *info,
else
setup_frame(sig, ka, oldset, regs);
if (!(ka->sa.sa_flags & SA_NODEFER)) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked, sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
} /* end handle_signal() */
/*****************************************************************************/

11
arch/h8300/kernel/signal.c
View File

@ -488,13 +488,12 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
else
setup_frame(sig, ka, oldset, regs);
if (!(ka->sa.sa_flags & SA_NODEFER)) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked,sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
/*

4
arch/i386/kernel/apic.c
View File

@ -726,15 +726,11 @@ __setup("apic=", apic_set_verbosity);
static int __init detect_init_APIC (void)
{
u32 h, l, features;
extern void get_cpu_vendor(struct cpuinfo_x86*);
/* Disabled by kernel option? */
if (enable_local_apic < 0)
return -1;
/* Workaround for us being called before identify_cpu(). */
get_cpu_vendor(&boot_cpu_data);
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD:
if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) ||

4
arch/i386/kernel/nmi.c
View File

@ -195,7 +195,7 @@ static void disable_lapic_nmi_watchdog(void)
wrmsr(MSR_P6_EVNTSEL0, 0, 0);
break;
case 15:
if (boot_cpu_data.x86_model > 0x3)
if (boot_cpu_data.x86_model > 0x4)
break;
wrmsr(MSR_P4_IQ_CCCR0, 0, 0);
@ -432,7 +432,7 @@ void setup_apic_nmi_watchdog (void)
setup_p6_watchdog();
break;
case 15:
if (boot_cpu_data.x86_model > 0x3)
if (boot_cpu_data.x86_model > 0x4)
return;
if (!setup_p4_watchdog())

5
arch/i386/kernel/signal.c
View File

@ -577,10 +577,11 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
else
ret = setup_frame(sig, ka, oldset, regs);
if (ret && !(ka->sa.sa_flags & SA_NODEFER)) {
if (ret) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
sigaddset(&current->blocked,sig);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked,sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}

10
arch/i386/kernel/traps.c
View File

@ -803,15 +803,17 @@ void math_error(void __user *eip)
*/
cwd = get_fpu_cwd(task);
swd = get_fpu_swd(task);
switch (((~cwd) & swd & 0x3f) | (swd & 0x240)) {
switch (swd & ~cwd & 0x3f) {
case 0x000:
default:
break;
case 0x001: /* Invalid Op */
case 0x041: /* Stack Fault */
case 0x241: /* Stack Fault | Direction */
/*
* swd & 0x240 == 0x040: Stack Underflow
* swd & 0x240 == 0x240: Stack Overflow
* User must clear the SF bit (0x40) if set
*/
info.si_code = FPE_FLTINV;
/* Should we clear the SF or let user space do it ???? */
break;
case 0x002: /* Denormalize */
case 0x010: /* Underflow */

11
arch/ia64/Kconfig
View File

@ -392,15 +392,8 @@ menu "Bus options (PCI, PCMCIA)"
config PCI
bool "PCI support"
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
VESA. If you have PCI, say Y, otherwise N.
The PCI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, contains valuable
information about which PCI hardware does work under Linux and which
doesn't.
Real IA-64 machines all have PCI/PCI-X/PCI Express busses. Say Y
here unless you are using a simulator without PCI support.
config PCI_DOMAINS
bool

262
arch/ia64/configs/sn2_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10
# Mon Jan 10 13:57:35 2005
# Linux kernel version: 2.6.13-rc6
# Tue Aug 16 14:40:41 2005
#
#
@ -10,6 +10,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@ -21,24 +22,26 @@ CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_CPUSETS=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CPUSETS=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
@ -63,9 +66,12 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_IA64_UNCACHED_ALLOCATOR=y
# CONFIG_IA64_GENERIC is not set
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
CONFIG_IA64_SGI_SN2=y
# CONFIG_IA64_HP_SIM is not set
# CONFIG_ITANIUM is not set
@ -74,6 +80,10 @@ CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
CONFIG_NUMA=y
CONFIG_VIRTUAL_MEM_MAP=y
@ -81,11 +91,20 @@ CONFIG_HOLES_IN_ZONE=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
# CONFIG_IA64_CYCLONE is not set
CONFIG_IOSAPIC=y
CONFIG_IA64_SGI_SN_XP=m
CONFIG_FORCE_MAX_ZONEORDER=18
CONFIG_SMP=y
CONFIG_NR_CPUS=512
# CONFIG_HOTPLUG_CPU is not set
CONFIG_SCHED_SMT=y
CONFIG_PREEMPT=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
@ -105,6 +124,7 @@ CONFIG_BINFMT_ELF=y
#
# Power management and ACPI
#
CONFIG_PM=y
CONFIG_ACPI=y
#
@ -114,6 +134,7 @@ CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_BUTTON is not set
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_PROCESSOR is not set
CONFIG_ACPI_NUMA=y
@ -133,6 +154,7 @@ CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
# PCI Hotplug Support
@ -141,7 +163,6 @@ CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_PCIE is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_HOTPLUG_PCI_SGI=y
@ -151,8 +172,70 @@ CONFIG_HOTPLUG_PCI_SGI=y
# CONFIG_PCCARD is not set
#
# PC-card bridges
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
#
# Device Drivers
@ -163,7 +246,7 @@ CONFIG_HOTPLUG_PCI_SGI=y
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
@ -188,6 +271,7 @@ CONFIG_FW_LOADER=m
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
@ -252,6 +336,7 @@ CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@ -282,6 +367,7 @@ CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@ -315,24 +401,20 @@ CONFIG_SCSI_SATA=y
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
CONFIG_SCSI_SATA_VITESSE=y
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
@ -342,6 +424,8 @@ CONFIG_SCSI_QLA22XX=y
CONFIG_SCSI_QLA2300=y
CONFIG_SCSI_QLA2322=y
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
@ -364,11 +448,15 @@ CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
@ -383,82 +471,13 @@ CONFIG_FUSION_CTL=m
# CONFIG_I2O is not set
#
# Networking support
# Network device support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@ -480,8 +499,10 @@ CONFIG_NETDEVICES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
@ -512,6 +533,10 @@ CONFIG_S2IO=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
@ -540,14 +565,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
# CONFIG_SERIO is not set
# CONFIG_SERIO_I8042 is not set
#
# Input Device Drivers
#
@ -557,6 +574,12 @@ CONFIG_SOUND_GAMEPORT=y
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
@ -568,9 +591,10 @@ CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_STALDRV is not set
CONFIG_SGI_SNSC=y
CONFIG_SGI_TIOCX=y
@ -587,6 +611,7 @@ CONFIG_SGI_MBCS=m
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_SGI_L1_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SGI_IOC4=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
@ -615,18 +640,30 @@ CONFIG_EFI_RTC=y
CONFIG_RAW_DRIVER=m
# CONFIG_HPET is not set
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
# CONFIG_I2C_SENSOR is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
#
# Misc devices
#
@ -660,6 +697,8 @@ CONFIG_DUMMY_CONSOLE=y
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
@ -669,9 +708,8 @@ CONFIG_USB=m
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
@ -679,7 +717,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
@ -710,12 +751,15 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
#
# USB Imaging devices
@ -740,6 +784,7 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
@ -763,9 +808,12 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
#
# USB ATM/DSL drivers
# USB DSL modem support
#
#
@ -782,6 +830,7 @@ CONFIG_USB_HIDINPUT=y
# InfiniBand support
#
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_VERBS=m
CONFIG_INFINIBAND_MTHCA=m
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
@ -799,6 +848,7 @@ CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@ -814,13 +864,19 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
CONFIG_XFS_FS=y
CONFIG_XFS_EXPORT=y
CONFIG_XFS_RT=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
@ -854,7 +910,6 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_XATTR=y
@ -885,15 +940,18 @@ CONFIG_RAMFS=y
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
@ -980,6 +1038,9 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
#
# Profiling support
@ -989,15 +1050,19 @@ CONFIG_ZLIB_DEFLATE=m
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=20
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
# CONFIG_KPROBES is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
@ -1019,11 +1084,12 @@ CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set

149
arch/ia64/configs/tiger_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13-rc1-20050629
# Wed Jun 29 15:28:12 2005
# Linux kernel version: 2.6.13-rc6-tiger-smp
# Wed Aug 17 10:19:51 2005
#
#
@ -132,6 +132,7 @@ CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_BUTTON=m
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
# CONFIG_ACPI_HOTPLUG_CPU is not set
@ -169,6 +170,66 @@ CONFIG_HOTPLUG_PCI_ACPI=m
#
# CONFIG_PCCARD is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
#
# Device Drivers
#
@ -178,7 +239,7 @@ CONFIG_HOTPLUG_PCI_ACPI=m
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
@ -348,6 +409,7 @@ CONFIG_SCSI_QLA22XX=m
CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@ -393,72 +455,8 @@ CONFIG_FUSION_CTL=y
# CONFIG_I2O is not set
#
# Networking support
# Network device support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
@ -555,6 +553,10 @@ CONFIG_TIGON3=y
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
@ -680,6 +682,7 @@ CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
CONFIG_RAW_DRIVER=m
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
@ -696,12 +699,19 @@ CONFIG_MAX_RAW_DEVS=256
# I2C support
#
# CONFIG_I2C is not set
# CONFIG_I2C_SENSOR is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
@ -800,6 +810,7 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
#
# USB Imaging devices
@ -850,6 +861,7 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
@ -910,6 +922,7 @@ CONFIG_XFS_EXPORT=y
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y

224
arch/ia64/configs/zx1_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13-rc1-20050629
# Wed Jun 29 15:31:11 2005
# Linux kernel version: 2.6.13-rc6
# Wed Aug 17 10:02:43 2005
#
#
@ -132,6 +132,7 @@ CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
@ -168,6 +169,83 @@ CONFIG_HOTPLUG_PCI_ACPI=y
#
# CONFIG_PCCARD is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
CONFIG_IP_NF_ARPTABLES=y
# CONFIG_IP_NF_ARPFILTER is not set
# CONFIG_IP_NF_ARP_MANGLE is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
#
# Device Drivers
#
@ -349,6 +427,7 @@ CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@ -362,9 +441,11 @@ CONFIG_SCSI_QLA2XXX=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
#
# IEEE 1394 (FireWire) support
@ -377,87 +458,8 @@ CONFIG_SCSI_QLA2XXX=y
# CONFIG_I2O is not set
#
# Networking support
# Network device support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
CONFIG_IP_NF_ARPTABLES=y
# CONFIG_IP_NF_ARPFILTER is not set
# CONFIG_IP_NF_ARP_MANGLE is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
@ -555,6 +557,8 @@ CONFIG_TIGON3=y
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@ -659,6 +663,7 @@ CONFIG_DRM=y
CONFIG_DRM_RADEON=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
@ -706,47 +711,10 @@ CONFIG_I2C_ALGOPCF=y
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
#
# Other I2C Chip support
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
@ -766,6 +734,11 @@ CONFIG_I2C_ALGOPCF=y
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
#
# Misc devices
#
@ -782,7 +755,6 @@ CONFIG_VIDEO_DEV=y
#
# Video Adapters
#
# CONFIG_TUNER_MULTI_I2C is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
@ -1025,6 +997,7 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
#
# USB Imaging devices
@ -1080,6 +1053,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
#
# USB DSL modem support
@ -1121,6 +1095,7 @@ CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
#
# XFS support
@ -1128,6 +1103,7 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y

2
arch/ia64/hp/sim/boot/boot_head.S
View File

@ -22,7 +22,7 @@ GLOBAL_ENTRY(_start)
.save rp, r0
.body
movl gp = __gp
movl sp = stack_mem
movl sp = stack_mem+16384-16
bsw.1
br.call.sptk.many rp=start_bootloader
END(_start)

1
arch/ia64/kernel/perfmon.c
View File

@ -4312,6 +4312,7 @@ pfm_context_load(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs)
DPRINT(("before cmpxchg() old_ctx=%p new_ctx=%p\n",
thread->pfm_context, ctx));
ret = -EBUSY;
old = ia64_cmpxchg(acq, &thread->pfm_context, NULL, ctx, sizeof(pfm_context_t *));
if (old != NULL) {
DPRINT(("load_pid [%d] already has a context\n", req->load_pid));

3
arch/ia64/kernel/salinfo.c
View File

@ -143,7 +143,8 @@ struct salinfo_data {
static struct salinfo_data salinfo_data[ARRAY_SIZE(salinfo_log_name)];
static spinlock_t data_lock, data_saved_lock;
static DEFINE_SPINLOCK(data_lock);
static DEFINE_SPINLOCK(data_saved_lock);
/** salinfo_platform_oemdata - optional callback to decode oemdata from an error
* record.

15
arch/ia64/kernel/signal.c
View File

@ -467,15 +467,12 @@ handle_signal (unsigned long sig, struct k_sigaction *ka, siginfo_t *info, sigse
if (!setup_frame(sig, ka, info, oldset, scr))
return 0;
if (!(ka->sa.sa_flags & SA_NODEFER)) {
spin_lock_irq(&current->sighand->siglock);
{
sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
sigaddset(&current->blocked, sig);
recalc_sigpending();
}
spin_unlock_irq(&current->sighand->siglock);
}
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked, sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
return 1;
}

1
arch/ia64/pci/pci.c
View File

@ -380,6 +380,7 @@ void pcibios_bus_to_resource(struct pci_dev *dev,
res->start = region->start + offset;
res->end = region->end + offset;
}
EXPORT_SYMBOL(pcibios_bus_to_resource);
static int __devinit is_valid_resource(struct pci_dev *dev, int idx)
{

19
arch/ia64/sn/kernel/io_init.c
View File

@ -203,6 +203,7 @@ static void sn_fixup_ionodes(void)
continue;
}
spin_lock_init(&sn_flush_device_list->sfdl_flush_lock);
hubdev->hdi_flush_nasid_list.widget_p[widget] =
sn_flush_device_list;
}
@ -322,7 +323,7 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
struct pci_controller *controller;
struct pcibus_bussoft *prom_bussoft_ptr;
struct hubdev_info *hubdev_info;
void *provider_soft;
void *provider_soft = NULL;
struct sn_pcibus_provider *provider;
status = sal_get_pcibus_info((u64) segment, (u64) busnum,
@ -338,7 +339,7 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
if (bus == NULL) {
bus = pci_scan_bus(busnum, &pci_root_ops, controller);
if (bus == NULL)
return; /* error, or bus already scanned */
goto error_return; /* error, or bus already scanned */
bus->sysdata = NULL;
}
@ -351,28 +352,30 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
*/
if (prom_bussoft_ptr->bs_asic_type >= PCIIO_ASIC_MAX_TYPES)
return; /* unsupported asic type */
goto error_return; /* unsupported asic type */
if (prom_bussoft_ptr->bs_asic_type == PCIIO_ASIC_TYPE_PPB)
goto error_return; /* no further fixup necessary */
provider = sn_pci_provider[prom_bussoft_ptr->bs_asic_type];
if (provider == NULL)
return; /* no provider registerd for this asic */
goto error_return; /* no provider registerd for this asic */
provider_soft = NULL;
bus->sysdata = controller;
if (provider->bus_fixup)
provider_soft = (*provider->bus_fixup) (prom_bussoft_ptr, controller);
if (provider_soft == NULL)
return; /* fixup failed or not applicable */
if (provider_soft == NULL) {
/* fixup failed or not applicable */
bus->sysdata = NULL;
goto error_return;
}
/*
* Generic bus fixup goes here. Don't reference prom_bussoft_ptr
* after this point.
*/
bus->sysdata = controller;
PCI_CONTROLLER(bus)->platform_data = provider_soft;
nasid = NASID_GET(SN_PCIBUS_BUSSOFT(bus)->bs_base);
cnode = nasid_to_cnodeid(nasid);

3
arch/m32r/Kconfig
View File

@ -269,7 +269,7 @@ config NR_CPUS
# Common NUMA Features
config NUMA
bool "Numa Memory Allocation Support"
depends on SMP
depends on SMP && BROKEN
default n
# turning this on wastes a bunch of space.
@ -286,6 +286,7 @@ menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
config PCI
bool "PCI support"
depends on BROKEN
default n
help
Find out whether you have a PCI motherboard. PCI is the name of a

2
arch/m32r/Kconfig.debug
View File

@ -20,7 +20,7 @@ config DEBUG_STACK_USAGE
config DEBUG_PAGEALLOC
bool "Page alloc debugging"
depends on DEBUG_KERNEL
depends on DEBUG_KERNEL && BROKEN
help
Unmap pages from the kernel linear mapping after free_pages().
This results in a large slowdown, but helps to find certain types

4
arch/m32r/kernel/setup_m32700ut.c
View File

@ -30,9 +30,11 @@
typedef struct {
unsigned long icucr; /* ICU Control Register */
} icu_data_t;
static icu_data_t icu_data[M32700UT_NUM_CPU_IRQ];
#else
icu_data_t icu_data[M32700UT_NUM_CPU_IRQ];
#endif /* CONFIG_SMP */
static icu_data_t icu_data[M32700UT_NUM_CPU_IRQ];
static void disable_m32700ut_irq(unsigned int irq)
{

4
arch/m32r/kernel/setup_opsput.c
View File

@ -31,9 +31,11 @@
typedef struct {
unsigned long icucr; /* ICU Control Register */
} icu_data_t;
static icu_data_t icu_data[OPSPUT_NUM_CPU_IRQ];
#else
icu_data_t icu_data[OPSPUT_NUM_CPU_IRQ];
#endif /* CONFIG_SMP */
static icu_data_t icu_data[OPSPUT_NUM_CPU_IRQ];
static void disable_opsput_irq(unsigned int irq)
{

11
arch/m32r/kernel/signal.c
View File

@ -341,13 +341,12 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
/* Set up the stack frame */
setup_rt_frame(sig, ka, info, oldset, regs);
if (!(ka->sa.sa_flags & SA_NODEFER)) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked,sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
/*

1
arch/m32r/kernel/smpboot.c
View File

@ -91,6 +91,7 @@ extern struct {
/* which physical physical ID maps to which logical CPU number */
static volatile int physid_2_cpu[NR_CPUS];
#define physid_to_cpu(physid) physid_2_cpu[physid]
/* which logical CPU number maps to which physical ID */
volatile int cpu_2_physid[NR_CPUS];

1
arch/m32r/lib/csum_partial_copy.c
View File

@ -58,3 +58,4 @@ csum_partial_copy_from_user (const unsigned char __user *src,
return csum_partial(dst, len-missing, sum);
}
EXPORT_SYMBOL(csum_partial_copy_from_user);
EXPORT_SYMBOL(csum_partial);

2
arch/m32r/mm/discontig.c
View File

@ -12,12 +12,14 @@
#include <linux/mmzone.h>
#include <linux/initrd.h>
#include <linux/nodemask.h>
#include <linux/module.h>
#include <asm/setup.h>
extern char _end[];
struct pglist_data *node_data[MAX_NUMNODES];
EXPORT_SYMBOL(node_data);
static bootmem_data_t node_bdata[MAX_NUMNODES] __initdata;
pg_data_t m32r_node_data[MAX_NUMNODES];

11
arch/m68knommu/kernel/signal.c
View File

@ -732,13 +732,12 @@ handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info,
if (ka->sa.sa_flags & SA_ONESHOT)
ka->sa.sa_handler = SIG_DFL;
if (!(ka->sa.sa_flags & SA_NODEFER)) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked,sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
/*

11
arch/mips/kernel/irixsig.c
View File

@ -155,13 +155,12 @@ static inline void handle_signal(unsigned long sig, siginfo_t *info,
else
setup_irix_frame(ka, regs, sig, oldset);
if (!(ka->sa.sa_flags & SA_NODEFER)) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked,sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
asmlinkage int do_irix_signal(sigset_t *oldset, struct pt_regs *regs)

11
arch/mips/kernel/signal.c
View File

@ -425,13 +425,12 @@ static inline void handle_signal(unsigned long sig, siginfo_t *info,
setup_frame(ka, regs, sig, oldset);
#endif
if (!(ka->sa.sa_flags & SA_NODEFER)) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked,sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
extern int do_signal32(sigset_t *oldset, struct pt_regs *regs);

11
arch/mips/kernel/signal32.c
View File

@ -751,13 +751,12 @@ static inline void handle_signal(unsigned long sig, siginfo_t *info,
else
setup_frame(ka, regs, sig, oldset);
if (!(ka->sa.sa_flags & SA_NODEFER)) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked,sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
int do_signal32(sigset_t *oldset, struct pt_regs *regs)

11
arch/parisc/kernel/signal.c
View File

@ -517,13 +517,12 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
if (!setup_rt_frame(sig, ka, info, oldset, regs, in_syscall))
return 0;
if (!(ka->sa.sa_flags & SA_NODEFER)) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked,sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
return 1;
}

5
arch/ppc/Kconfig
View File

@ -911,6 +911,7 @@ config PPCBUG_NVRAM
default y if PPC_PREP
config SMP
depends on PPC_STD_MMU
bool "Symmetric multi-processing support"
---help---
This enables support for systems with more than one CPU. If you have
@ -930,7 +931,7 @@ config SMP
config IRQ_ALL_CPUS
bool "Distribute interrupts on all CPUs by default"
depends on SMP
depends on SMP && !MV64360
help
This option gives the kernel permission to distribute IRQs across
multiple CPUs. Saying N here will route all IRQs to the first
@ -1121,7 +1122,9 @@ config PROC_HARDWARE
source "drivers/zorro/Kconfig"
if !44x || BROKEN
source kernel/power/Kconfig
endif
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"

11
arch/ppc/kernel/signal.c
View File

@ -759,13 +759,12 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
else
handle_signal(signr, &ka, &info, oldset, regs, newsp);
if (!(ka.sa.sa_flags & SA_NODEFER)) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka.sa.sa_mask);
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka.sa.sa_mask);
if (!(ka.sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked, signr);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
return 1;
}

14
arch/ppc/platforms/4xx/Kconfig
View File

@ -3,6 +3,11 @@ config 4xx
depends on 40x || 44x
default y
config WANT_EARLY_SERIAL
bool
select SERIAL_8250
default n
menu "IBM 4xx options"
depends on 4xx
@ -18,6 +23,7 @@ config ASH
config BUBINGA
bool "Bubinga"
select WANT_EARLY_SERIAL
help
This option enables support for the IBM 405EP evaluation board.
@ -70,21 +76,25 @@ choice
config BAMBOO
bool "Bamboo"
select WANT_EARLY_SERIAL
help
This option enables support for the IBM PPC440EP evaluation board.
config EBONY
bool "Ebony"
select WANT_EARLY_SERIAL
help
This option enables support for the IBM PPC440GP evaluation board.
config LUAN
bool "Luan"
select WANT_EARLY_SERIAL
help
This option enables support for the IBM PPC440SP evaluation board.
config OCOTEA
bool "Ocotea"
select WANT_EARLY_SERIAL
help
This option enables support for the IBM PPC440GX evaluation board.
@ -230,10 +240,6 @@ config PPC_GEN550
depends on 4xx
default y
config PM
bool "Power Management support (EXPERIMENTAL)"
depends on 4xx && EXPERIMENTAL
choice
prompt "TTYS0 device and default console"
depends on 40x

2
arch/ppc/syslib/m8xx_setup.c
View File

@ -423,7 +423,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
ppc_md.find_end_of_memory = m8xx_find_end_of_memory;
ppc_md.setup_io_mappings = m8xx_map_io;
#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
#if defined(CONFIG_BLK_DEV_MPC8xx_IDE)
m8xx_ide_init();
#endif
}

10
arch/ppc/syslib/ppc4xx_dma.c
View File

@ -620,6 +620,7 @@ ppc4xx_clr_dma_status(unsigned int dmanr)
return DMA_STATUS_GOOD;
}
#ifdef CONFIG_PPC4xx_EDMA
/*
* Enables the burst on the channel (BTEN bit in the control/count register)
* Note:
@ -685,6 +686,11 @@ ppc4xx_set_burst_size(unsigned int dmanr, unsigned int bsize)
return DMA_STATUS_GOOD;
}
EXPORT_SYMBOL(ppc4xx_enable_burst);
EXPORT_SYMBOL(ppc4xx_disable_burst);
EXPORT_SYMBOL(ppc4xx_set_burst_size);
#endif /* CONFIG_PPC4xx_EDMA */
EXPORT_SYMBOL(ppc4xx_init_dma_channel);
EXPORT_SYMBOL(ppc4xx_get_channel_config);
EXPORT_SYMBOL(ppc4xx_set_channel_priority);
@ -703,6 +709,4 @@ EXPORT_SYMBOL(ppc4xx_enable_dma_interrupt);
EXPORT_SYMBOL(ppc4xx_disable_dma_interrupt);
EXPORT_SYMBOL(ppc4xx_get_dma_status);
EXPORT_SYMBOL(ppc4xx_clr_dma_status);
EXPORT_SYMBOL(ppc4xx_enable_burst);
EXPORT_SYMBOL(ppc4xx_disable_burst);
EXPORT_SYMBOL(ppc4xx_set_burst_size);

7
arch/ppc64/kernel/iommu.c
View File

@ -242,7 +242,7 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
dma_addr_t dma_next = 0, dma_addr;
unsigned long flags;
struct scatterlist *s, *outs, *segstart;
int outcount;
int outcount, incount;
unsigned long handle;
BUG_ON(direction == DMA_NONE);
@ -252,6 +252,7 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
outs = s = segstart = &sglist[0];
outcount = 1;
incount = nelems;
handle = 0;
/* Init first segment length for backout at failure */
@ -338,10 +339,10 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
DBG("mapped %d elements:\n", outcount);
/* For the sake of iommu_free_sg, we clear out the length in the
/* For the sake of iommu_unmap_sg, we clear out the length in the
* next entry of the sglist if we didn't fill the list completely
*/
if (outcount < nelems) {
if (outcount < incount) {
outs++;
outs->dma_address = DMA_ERROR_CODE;
outs->dma_length = 0;

2
arch/ppc64/kernel/setup.c
View File

@ -706,6 +706,8 @@ void machine_power_off(void)
local_irq_disable();
while (1) ;
}
/* Used by the G5 thermal driver */
EXPORT_SYMBOL_GPL(machine_power_off);
void machine_halt(void)
{

5
arch/ppc64/kernel/signal.c
View File

@ -481,10 +481,11 @@ static int handle_signal(unsigned long sig, struct k_sigaction *ka,
/* Set up Signal Frame */
ret = setup_rt_frame(sig, ka, info, oldset, regs);
if (ret && !(ka->sa.sa_flags & SA_NODEFER)) {
if (ret) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
sigaddset(&current->blocked,sig);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked,sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}

5
arch/ppc64/kernel/signal32.c
View File

@ -976,11 +976,12 @@ int do_signal32(sigset_t *oldset, struct pt_regs *regs)
else
ret = handle_signal32(signr, &ka, &info, oldset, regs, newsp);
if (ret && !(ka.sa.sa_flags & SA_NODEFER)) {
if (ret) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked, &current->blocked,
&ka.sa.sa_mask);
sigaddset(&current->blocked, signr);
if (!(ka.sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked, signr);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}

11
arch/s390/kernel/compat_signal.c
View File

@ -637,12 +637,11 @@ handle_signal32(unsigned long sig, struct k_sigaction *ka,
else
setup_frame32(sig, ka, oldset, regs);
if (!(ka->sa.sa_flags & SA_NODEFER)) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked,sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}

8
arch/s390/kernel/cpcmd.c
View File

@ -46,9 +46,9 @@ int __cpcmd(const char *cmd, char *response, int rlen, int *response_code)
"lra 3,0(%4)\n"
"lr 5,%5\n"
"diag 2,4,0x8\n"
"brc 8, .Litfits\n"
"brc 8, 1f\n"
"ar 5, %5\n"
".Litfits: \n"
"1: \n"
"lr %0,4\n"
"lr %1,5\n"
: "=d" (return_code), "=d" (return_len)
@ -64,9 +64,9 @@ int __cpcmd(const char *cmd, char *response, int rlen, int *response_code)
"sam31\n"
"diag 2,4,0x8\n"
"sam64\n"
"brc 8, .Litfits\n"
"brc 8, 1f\n"
"agr 5, %5\n"
".Litfits: \n"
"1: \n"
"lgr %0,4\n"
"lgr %1,5\n"
: "=d" (return_code), "=d" (return_len)

11
arch/s390/kernel/signal.c
View File

@ -429,13 +429,12 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
else
setup_frame(sig, ka, oldset, regs);
if (!(ka->sa.sa_flags & SA_NODEFER)) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked,sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
/*

5
arch/sh/kernel/entry.S
View File

@ -1145,5 +1145,10 @@ ENTRY(sys_call_table)
.long sys_add_key /* 285 */
.long sys_request_key
.long sys_keyctl
.long sys_ioprio_set
.long sys_ioprio_get
.long sys_inotify_init /* 290 */
.long sys_inotify_add_watch
.long sys_inotify_rm_watch
/* End of entry.S */

11
arch/sh/kernel/signal.c
View File

@ -546,13 +546,12 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
if (ka->sa.sa_flags & SA_ONESHOT)
ka->sa.sa_handler = SIG_DFL;
if (!(ka->sa.sa_flags & SA_NODEFER)) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked,sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
/*

11
arch/sh64/kernel/signal.c
View File

@ -664,13 +664,12 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
else
setup_frame(sig, ka, oldset, regs);
if (!(ka->sa.sa_flags & SA_NODEFER)) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked,sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
/*

5
arch/sh64/kernel/syscalls.S
View File

@ -342,4 +342,9 @@ sys_call_table:
.long sys_add_key
.long sys_request_key
.long sys_keyctl /* 315 */
.long sys_ioprio_set
.long sys_ioprio_get
.long sys_inotify_init
.long sys_inotify_add_watch
.long sys_inotify_rm_watch /* 320 */

1
arch/sparc/kernel/setup.c
View File

@ -32,7 +32,6 @@
#include <linux/spinlock.h>
#include <linux/root_dev.h>
#include <asm/segment.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/processor.h>

11
arch/sparc/kernel/signal.c
View File

@ -1034,13 +1034,12 @@ handle_signal(unsigned long signr, struct k_sigaction *ka,
else
setup_frame(&ka->sa, regs, signr, oldset, info);
}
if (!(ka->sa.sa_flags & SA_NOMASK)) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NOMASK))
sigaddset(&current->blocked, signr);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
static inline void syscall_restart(unsigned long orig_i0, struct pt_regs *regs,

5
arch/sparc/kernel/sparc_ksyms.c
View File

@ -98,8 +98,9 @@ extern void ___rw_write_enter(void);
* The module references will be fixed up by module_frob_arch_sections.
*/
#define DOT_ALIAS2(__ret, __x, __arg1, __arg2) \
extern __ret __x(__arg1, __arg2) \
__attribute__((weak, alias("." # __x)));
extern __ret __x(__arg1, __arg2); \
asm(".weak " #__x);\
asm(#__x "=." #__x);
DOT_ALIAS2(int, div, int, int)
DOT_ALIAS2(int, mul, int, int)

1
arch/sparc/kernel/tick14.c
View File

@ -19,7 +19,6 @@
#include <linux/interrupt.h>
#include <asm/oplib.h>
#include <asm/segment.h>
#include <asm/timer.h>
#include <asm/mostek.h>
#include <asm/system.h>

1
arch/sparc/kernel/time.c
View File

@ -32,7 +32,6 @@
#include <linux/profile.h>
#include <asm/oplib.h>
#include <asm/segment.h>
#include <asm/timer.h>
#include <asm/mostek.h>
#include <asm/system.h>

1
arch/sparc/mm/fault.c
View File

@ -23,7 +23,6 @@
#include <linux/module.h>
#include <asm/system.h>
#include <asm/segment.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/memreg.h>

1
arch/sparc/mm/init.c
View File

@ -25,7 +25,6 @@
#include <linux/bootmem.h>
#include <asm/system.h>
#include <asm/segment.h>
#include <asm/vac-ops.h>
#include <asm/page.h>
#include <asm/pgtable.h>

2
arch/sparc64/kernel/Makefile
View File

@ -8,7 +8,7 @@ EXTRA_CFLAGS := -Werror
extra-y := head.o init_task.o vmlinux.lds
obj-y := process.o setup.o cpu.o idprom.o \
traps.o devices.o auxio.o \
traps.o devices.o auxio.o una_asm.o \
irq.o ptrace.o time.o sys_sparc.o signal.o \
unaligned.o central.o pci.o starfire.o semaphore.o \
power.o sbus.o iommu_common.o sparc64_ksyms.o chmc.o

329
arch/sparc64/kernel/entry.S
View File

@ -21,6 +21,7 @@
#include <asm/visasm.h>
#include <asm/estate.h>
#include <asm/auxio.h>
#include <asm/sfafsr.h>
#define curptr g6
@ -690,79 +691,102 @@ netbsd_syscall:
retl
nop
/* These next few routines must be sure to clear the
* SFSR FaultValid bit so that the fast tlb data protection
* handler does not flush the wrong context and lock up the
* box.
/* We need to carefully read the error status, ACK
* the errors, prevent recursive traps, and pass the
* information on to C code for logging.
*
* We pass the AFAR in as-is, and we encode the status
* information as described in asm-sparc64/sfafsr.h
*/
.globl __do_data_access_exception
.globl __do_data_access_exception_tl1
__do_data_access_exception_tl1:
rdpr %pstate, %g4
wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate
mov TLB_SFSR, %g3
mov DMMU_SFAR, %g5
ldxa [%g3] ASI_DMMU, %g4 ! Get SFSR
ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR
stxa %g0, [%g3] ASI_DMMU ! Clear SFSR.FaultValid bit
.globl __spitfire_access_error
__spitfire_access_error:
/* Disable ESTATE error reporting so that we do not
* take recursive traps and RED state the processor.
*/
stxa %g0, [%g0] ASI_ESTATE_ERROR_EN
membar #Sync
ba,pt %xcc, winfix_dax
rdpr %tpc, %g3
__do_data_access_exception:
rdpr %pstate, %g4
wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate
mov TLB_SFSR, %g3
mov DMMU_SFAR, %g5
ldxa [%g3] ASI_DMMU, %g4 ! Get SFSR
ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR
stxa %g0, [%g3] ASI_DMMU ! Clear SFSR.FaultValid bit
membar #Sync
sethi %hi(109f), %g7
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
call data_access_exception
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
.globl __do_instruction_access_exception
.globl __do_instruction_access_exception_tl1
__do_instruction_access_exception_tl1:
rdpr %pstate, %g4
wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate
mov TLB_SFSR, %g3
mov DMMU_SFAR, %g5
ldxa [%g3] ASI_DMMU, %g4 ! Get SFSR
ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR
stxa %g0, [%g3] ASI_IMMU ! Clear FaultValid bit
mov UDBE_UE, %g1
ldxa [%g0] ASI_AFSR, %g4 ! Get AFSR
/* __spitfire_cee_trap branches here with AFSR in %g4 and
* UDBE_CE in %g1. It only clears ESTATE_ERR_CE in the
* ESTATE Error Enable register.
*/
__spitfire_cee_trap_continue:
ldxa [%g0] ASI_AFAR, %g5 ! Get AFAR
rdpr %tt, %g3
and %g3, 0x1ff, %g3 ! Paranoia
sllx %g3, SFSTAT_TRAP_TYPE_SHIFT, %g3
or %g4, %g3, %g4
rdpr %tl, %g3
cmp %g3, 1
mov 1, %g3
bleu %xcc, 1f
sllx %g3, SFSTAT_TL_GT_ONE_SHIFT, %g3
or %g4, %g3, %g4
/* Read in the UDB error register state, clearing the
* sticky error bits as-needed. We only clear them if
* the UE bit is set. Likewise, __spitfire_cee_trap
* below will only do so if the CE bit is set.
*
* NOTE: UltraSparc-I/II have high and low UDB error
* registers, corresponding to the two UDB units
* present on those chips. UltraSparc-IIi only
* has a single UDB, called "SDB" in the manual.
* For IIi the upper UDB register always reads
* as zero so for our purposes things will just
* work with the checks below.
*/
1: ldxa [%g0] ASI_UDBH_ERROR_R, %g3
and %g3, 0x3ff, %g7 ! Paranoia
sllx %g7, SFSTAT_UDBH_SHIFT, %g7
or %g4, %g7, %g4
andcc %g3, %g1, %g3 ! UDBE_UE or UDBE_CE
be,pn %xcc, 1f
nop
stxa %g3, [%g0] ASI_UDB_ERROR_W
membar #Sync
sethi %hi(109f), %g7
1: mov 0x18, %g3
ldxa [%g3] ASI_UDBL_ERROR_R, %g3
and %g3, 0x3ff, %g7 ! Paranoia
sllx %g7, SFSTAT_UDBL_SHIFT, %g7
or %g4, %g7, %g4
andcc %g3, %g1, %g3 ! UDBE_UE or UDBE_CE
be,pn %xcc, 1f
nop
mov 0x18, %g7
stxa %g3, [%g7] ASI_UDB_ERROR_W
membar #Sync
1: /* Ok, now that we've latched the error state,
* clear the sticky bits in the AFSR.
*/
stxa %g4, [%g0] ASI_AFSR
membar #Sync
rdpr %tl, %g2
cmp %g2, 1
rdpr %pil, %g2
bleu,pt %xcc, 1f
wrpr %g0, 15, %pil
ba,pt %xcc, etraptl1
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
call instruction_access_exception_tl1
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
rd %pc, %g7
__do_instruction_access_exception:
rdpr %pstate, %g4
wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate
mov TLB_SFSR, %g3
mov DMMU_SFAR, %g5
ldxa [%g3] ASI_DMMU, %g4 ! Get SFSR
ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR
stxa %g0, [%g3] ASI_IMMU ! Clear FaultValid bit
membar #Sync
sethi %hi(109f), %g7
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
mov %l4, %o1
ba,pt %xcc, 2f
nop
1: ba,pt %xcc, etrap_irq
rd %pc, %g7
2: mov %l4, %o1
mov %l5, %o2
call instruction_access_exception
call spitfire_access_error
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
@ -784,79 +808,124 @@ __do_instruction_access_exception:
* as it is the only situation where we can safely record
* and log. For trap level >1 we just clear the CE bit
* in the AFSR and return.
*/
/* Our trap handling infrastructure allows us to preserve
* two 64-bit values during etrap for arguments to
* subsequent C code. Therefore we encode the information
* as follows:
*
* value 1) Full 64-bits of AFAR
* value 2) Low 33-bits of AFSR, then bits 33-->42
* are UDBL error status and bits 43-->52
* are UDBH error status
* This is just like __spiftire_access_error above, but it
* specifically handles correctable errors. If an
* uncorrectable error is indicated in the AFSR we
* will branch directly above to __spitfire_access_error
* to handle it instead. Uncorrectable therefore takes
* priority over correctable, and the error logging
* C code will notice this case by inspecting the
* trap type.
*/
.align 64
.globl cee_trap
cee_trap:
ldxa [%g0] ASI_AFSR, %g1 ! Read AFSR
ldxa [%g0] ASI_AFAR, %g2 ! Read AFAR
sllx %g1, 31, %g1 ! Clear reserved bits
srlx %g1, 31, %g1 ! in AFSR
.globl __spitfire_cee_trap
__spitfire_cee_trap:
ldxa [%g0] ASI_AFSR, %g4 ! Get AFSR
mov 1, %g3
sllx %g3, SFAFSR_UE_SHIFT, %g3
andcc %g4, %g3, %g0 ! Check for UE
bne,pn %xcc, __spitfire_access_error
nop
/* NOTE: UltraSparc-I/II have high and low UDB error
* registers, corresponding to the two UDB units
* present on those chips. UltraSparc-IIi only
* has a single UDB, called "SDB" in the manual.
* For IIi the upper UDB register always reads
* as zero so for our purposes things will just
* work with the checks below.
/* Ok, in this case we only have a correctable error.
* Indicate we only wish to capture that state in register
* %g1, and we only disable CE error reporting unlike UE
* handling which disables all errors.
*/
ldxa [%g0] ASI_UDBL_ERROR_R, %g3 ! Read UDB-Low error status
andcc %g3, (1 << 8), %g4 ! Check CE bit
sllx %g3, (64 - 10), %g3 ! Clear reserved bits
srlx %g3, (64 - 10), %g3 ! in UDB-Low error status
ldxa [%g0] ASI_ESTATE_ERROR_EN, %g3
andn %g3, ESTATE_ERR_CE, %g3
stxa %g3, [%g0] ASI_ESTATE_ERROR_EN
membar #Sync
sllx %g3, (33 + 0), %g3 ! Shift up to encoding area
or %g1, %g3, %g1 ! Or it in
be,pn %xcc, 1f ! Branch if CE bit was clear
/* Preserve AFSR in %g4, indicate UDB state to capture in %g1 */
ba,pt %xcc, __spitfire_cee_trap_continue
mov UDBE_CE, %g1
.globl __spitfire_data_access_exception
.globl __spitfire_data_access_exception_tl1
__spitfire_data_access_exception_tl1:
rdpr %pstate, %g4
wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate
mov TLB_SFSR, %g3
mov DMMU_SFAR, %g5
ldxa [%g3] ASI_DMMU, %g4 ! Get SFSR
ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR
stxa %g0, [%g3] ASI_DMMU ! Clear SFSR.FaultValid bit
membar #Sync
rdpr %tt, %g3
cmp %g3, 0x80 ! first win spill/fill trap
blu,pn %xcc, 1f
cmp %g3, 0xff ! last win spill/fill trap
bgu,pn %xcc, 1f
nop
stxa %g4, [%g0] ASI_UDB_ERROR_W ! Clear CE sticky bit in UDBL
membar #Sync ! Synchronize ASI stores
1: mov 0x18, %g5 ! Addr of UDB-High error status
ldxa [%g5] ASI_UDBH_ERROR_R, %g3 ! Read it
ba,pt %xcc, winfix_dax
rdpr %tpc, %g3
1: sethi %hi(109f), %g7
ba,pt %xcc, etraptl1
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
call spitfire_data_access_exception_tl1
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
andcc %g3, (1 << 8), %g4 ! Check CE bit
sllx %g3, (64 - 10), %g3 ! Clear reserved bits
srlx %g3, (64 - 10), %g3 ! in UDB-High error status
sllx %g3, (33 + 10), %g3 ! Shift up to encoding area
or %g1, %g3, %g1 ! Or it in
be,pn %xcc, 1f ! Branch if CE bit was clear
nop
nop
__spitfire_data_access_exception:
rdpr %pstate, %g4
wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate
mov TLB_SFSR, %g3
mov DMMU_SFAR, %g5
ldxa [%g3] ASI_DMMU, %g4 ! Get SFSR
ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR
stxa %g0, [%g3] ASI_DMMU ! Clear SFSR.FaultValid bit
membar #Sync
sethi %hi(109f), %g7
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
call spitfire_data_access_exception
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
stxa %g4, [%g5] ASI_UDB_ERROR_W ! Clear CE sticky bit in UDBH
membar #Sync ! Synchronize ASI stores
1: mov 1, %g5 ! AFSR CE bit is
sllx %g5, 20, %g5 ! bit 20
stxa %g5, [%g0] ASI_AFSR ! Clear CE sticky bit in AFSR
membar #Sync ! Synchronize ASI stores
sllx %g2, (64 - 41), %g2 ! Clear reserved bits
srlx %g2, (64 - 41), %g2 ! in latched AFAR
.globl __spitfire_insn_access_exception
.globl __spitfire_insn_access_exception_tl1
__spitfire_insn_access_exception_tl1:
rdpr %pstate, %g4
wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate
mov TLB_SFSR, %g3
ldxa [%g3] ASI_IMMU, %g4 ! Get SFSR
rdpr %tpc, %g5 ! IMMU has no SFAR, use TPC
stxa %g0, [%g3] ASI_IMMU ! Clear FaultValid bit
membar #Sync
sethi %hi(109f), %g7
ba,pt %xcc, etraptl1
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
call spitfire_insn_access_exception_tl1
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
andn %g2, 0x0f, %g2 ! Finish resv bit clearing
mov %g1, %g4 ! Move AFSR+UDB* into save reg
mov %g2, %g5 ! Move AFAR into save reg
rdpr %pil, %g2
wrpr %g0, 15, %pil
ba,pt %xcc, etrap_irq
rd %pc, %g7
mov %l4, %o0
mov %l5, %o1
call cee_log
add %sp, PTREGS_OFF, %o2
ba,a,pt %xcc, rtrap_irq
__spitfire_insn_access_exception:
rdpr %pstate, %g4
wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate
mov TLB_SFSR, %g3
ldxa [%g3] ASI_IMMU, %g4 ! Get SFSR
rdpr %tpc, %g5 ! IMMU has no SFAR, use TPC
stxa %g0, [%g3] ASI_IMMU ! Clear FaultValid bit
membar #Sync
sethi %hi(109f), %g7
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
call spitfire_insn_access_exception
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
/* Capture I/D/E-cache state into per-cpu error scoreboard.
*

1
arch/sparc64/kernel/pci.c
View File

@ -540,6 +540,7 @@ void pcibios_bus_to_resource(struct pci_dev *pdev, struct resource *res,
pbm->parent->resource_adjust(pdev, res, root);
}
EXPORT_SYMBOL(pcibios_bus_to_resource);
char * __init pcibios_setup(char *str)
{

2
arch/sparc64/kernel/pci_iommu.c
View File

@ -466,7 +466,7 @@ do_flush_sync:
if (!limit)
break;
udelay(1);
membar("#LoadLoad");
rmb();
}
if (!limit)
printk(KERN_WARNING "pci_strbuf_flush: flushflag timeout "

2
arch/sparc64/kernel/process.c
View File

@ -103,7 +103,7 @@ void cpu_idle(void)
* other cpus see our increasing idleness for the buddy
* redistribution algorithm. -DaveM
*/
membar("#StoreStore | #StoreLoad");
membar_storeload_storestore();
}
}

2
arch/sparc64/kernel/sbus.c
View File

@ -147,7 +147,7 @@ static void sbus_strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long
if (!limit)
break;
udelay(1);
membar("#LoadLoad");
rmb();
}
if (!limit)
printk(KERN_WARNING "sbus_strbuf_flush: flushflag timeout "

1
arch/sparc64/kernel/setup.c
View File

@ -33,7 +33,6 @@
#include <linux/cpu.h>
#include <linux/initrd.h>
#include <asm/segment.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/processor.h>

11
arch/sparc64/kernel/signal.c
View File

@ -574,13 +574,12 @@ static inline void handle_signal(unsigned long signr, struct k_sigaction *ka,
{
setup_rt_frame(ka, regs, signr, oldset,
(ka->sa.sa_flags & SA_SIGINFO) ? info : NULL);
if (!(ka->sa.sa_flags & SA_NOMASK)) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NOMASK))
sigaddset(&current->blocked,signr);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
static inline void syscall_restart(unsigned long orig_i0, struct pt_regs *regs,

33
arch/sparc64/kernel/signal32.c
View File

@ -877,11 +877,12 @@ static void new_setup_frame32(struct k_sigaction *ka, struct pt_regs *regs,
unsigned long page = (unsigned long)
page_address(pte_page(*ptep));
__asm__ __volatile__(
" membar #StoreStore\n"
" flush %0 + %1"
: : "r" (page), "r" (address & (PAGE_SIZE - 1))
: "memory");
wmb();
__asm__ __volatile__("flush %0 + %1"
: /* no outputs */
: "r" (page),
"r" (address & (PAGE_SIZE - 1))
: "memory");
}
pte_unmap(ptep);
preempt_enable();
@ -1292,11 +1293,12 @@ static void setup_rt_frame32(struct k_sigaction *ka, struct pt_regs *regs,
unsigned long page = (unsigned long)
page_address(pte_page(*ptep));
__asm__ __volatile__(
" membar #StoreStore\n"
" flush %0 + %1"
: : "r" (page), "r" (address & (PAGE_SIZE - 1))
: "memory");
wmb();
__asm__ __volatile__("flush %0 + %1"
: /* no outputs */
: "r" (page),
"r" (address & (PAGE_SIZE - 1))
: "memory");
}
pte_unmap(ptep);
preempt_enable();
@ -1325,13 +1327,12 @@ static inline void handle_signal32(unsigned long signr, struct k_sigaction *ka,
else
setup_frame32(&ka->sa, regs, signr, oldset, info);
}
if (!(ka->sa.sa_flags & SA_NOMASK)) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NOMASK))
sigaddset(&current->blocked,signr);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
static inline void syscall_restart32(unsigned long orig_i0, struct pt_regs *regs,

30
arch/sparc64/kernel/smp.c
View File

@ -144,7 +144,7 @@ void __init smp_callin(void)
current->active_mm = &init_mm;
while (!cpu_isset(cpuid, smp_commenced_mask))
membar("#LoadLoad");
rmb();
cpu_set(cpuid, cpu_online_map);
}
@ -184,11 +184,11 @@ static inline long get_delta (long *rt, long *master)
for (i = 0; i < NUM_ITERS; i++) {
t0 = tick_ops->get_tick();
go[MASTER] = 1;
membar("#StoreLoad");
membar_storeload();
while (!(tm = go[SLAVE]))
membar("#LoadLoad");
rmb();
go[SLAVE] = 0;
membar("#StoreStore");
wmb();
t1 = tick_ops->get_tick();
if (t1 - t0 < best_t1 - best_t0)
@ -221,7 +221,7 @@ void smp_synchronize_tick_client(void)
go[MASTER] = 1;
while (go[MASTER])
membar("#LoadLoad");
rmb();
local_irq_save(flags);
{
@ -273,21 +273,21 @@ static void smp_synchronize_one_tick(int cpu)
/* wait for client to be ready */
while (!go[MASTER])
membar("#LoadLoad");
rmb();
/* now let the client proceed into his loop */
go[MASTER] = 0;
membar("#StoreLoad");
membar_storeload();
spin_lock_irqsave(&itc_sync_lock, flags);
{
for (i = 0; i < NUM_ROUNDS*NUM_ITERS; i++) {
while (!go[MASTER])
membar("#LoadLoad");
rmb();
go[MASTER] = 0;
membar("#StoreStore");
wmb();
go[SLAVE] = tick_ops->get_tick();
membar("#StoreLoad");
membar_storeload();
}
}
spin_unlock_irqrestore(&itc_sync_lock, flags);
@ -927,11 +927,11 @@ void smp_capture(void)
smp_processor_id());
#endif
penguins_are_doing_time = 1;
membar("#StoreStore | #LoadStore");
membar_storestore_loadstore();
atomic_inc(&smp_capture_registry);
smp_cross_call(&xcall_capture, 0, 0, 0);
while (atomic_read(&smp_capture_registry) != ncpus)
membar("#LoadLoad");
rmb();
#ifdef CAPTURE_DEBUG
printk("done\n");
#endif
@ -947,7 +947,7 @@ void smp_release(void)
smp_processor_id());
#endif
penguins_are_doing_time = 0;
membar("#StoreStore | #StoreLoad");
membar_storeload_storestore();
atomic_dec(&smp_capture_registry);
}
}
@ -970,9 +970,9 @@ void smp_penguin_jailcell(int irq, struct pt_regs *regs)
save_alternate_globals(global_save);
prom_world(1);
atomic_inc(&smp_capture_registry);
membar("#StoreLoad | #StoreStore");
membar_storeload_storestore();
while (penguins_are_doing_time)
membar("#LoadLoad");
rmb();
restore_alternate_globals(global_save);
atomic_dec(&smp_capture_registry);
prom_world(0);

32
arch/sparc64/kernel/sparc64_ksyms.c
View File

@ -99,17 +99,6 @@ extern int __ashrdi3(int, int);
extern void dump_thread(struct pt_regs *, struct user *);
extern int dump_fpu (struct pt_regs * regs, elf_fpregset_t * fpregs);
#if defined(CONFIG_SMP) && defined(CONFIG_DEBUG_SPINLOCK)
extern void _do_spin_lock (spinlock_t *lock, char *str);
extern void _do_spin_unlock (spinlock_t *lock);
extern int _spin_trylock (spinlock_t *lock);
extern void _do_read_lock(rwlock_t *rw, char *str);
extern void _do_read_unlock(rwlock_t *rw, char *str);
extern void _do_write_lock(rwlock_t *rw, char *str);
extern void _do_write_unlock(rwlock_t *rw);
extern int _do_write_trylock(rwlock_t *rw, char *str);
#endif
extern unsigned long phys_base;
extern unsigned long pfn_base;
@ -152,18 +141,6 @@ EXPORT_SYMBOL(_mcount);
EXPORT_SYMBOL(cpu_online_map);
EXPORT_SYMBOL(phys_cpu_present_map);
/* Spinlock debugging library, optional. */
#ifdef CONFIG_DEBUG_SPINLOCK
EXPORT_SYMBOL(_do_spin_lock);
EXPORT_SYMBOL(_do_spin_unlock);
EXPORT_SYMBOL(_spin_trylock);
EXPORT_SYMBOL(_do_read_lock);
EXPORT_SYMBOL(_do_read_unlock);
EXPORT_SYMBOL(_do_write_lock);
EXPORT_SYMBOL(_do_write_unlock);
EXPORT_SYMBOL(_do_write_trylock);
#endif
EXPORT_SYMBOL(smp_call_function);
#endif /* CONFIG_SMP */
@ -429,3 +406,12 @@ EXPORT_SYMBOL(xor_vis_4);
EXPORT_SYMBOL(xor_vis_5);
EXPORT_SYMBOL(prom_palette);
/* memory barriers */
EXPORT_SYMBOL(mb);
EXPORT_SYMBOL(rmb);
EXPORT_SYMBOL(wmb);
EXPORT_SYMBOL(membar_storeload);
EXPORT_SYMBOL(membar_storeload_storestore);
EXPORT_SYMBOL(membar_storeload_loadload);
EXPORT_SYMBOL(membar_storestore_loadstore);

272
arch/sparc64/kernel/traps.c
View File

@ -33,6 +33,7 @@
#include <asm/dcu.h>
#include <asm/estate.h>
#include <asm/chafsr.h>
#include <asm/sfafsr.h>
#include <asm/psrcompat.h>
#include <asm/processor.h>
#include <asm/timer.h>
@ -143,8 +144,7 @@ void do_BUG(const char *file, int line)
}
#endif
void instruction_access_exception(struct pt_regs *regs,
unsigned long sfsr, unsigned long sfar)
void spitfire_insn_access_exception(struct pt_regs *regs, unsigned long sfsr, unsigned long sfar)
{
siginfo_t info;
@ -153,8 +153,8 @@ void instruction_access_exception(struct pt_regs *regs,
return;
if (regs->tstate & TSTATE_PRIV) {
printk("instruction_access_exception: SFSR[%016lx] SFAR[%016lx], going.\n",
sfsr, sfar);
printk("spitfire_insn_access_exception: SFSR[%016lx] "
"SFAR[%016lx], going.\n", sfsr, sfar);
die_if_kernel("Iax", regs);
}
if (test_thread_flag(TIF_32BIT)) {
@ -169,19 +169,17 @@ void instruction_access_exception(struct pt_regs *regs,
force_sig_info(SIGSEGV, &info, current);
}
void instruction_access_exception_tl1(struct pt_regs *regs,
unsigned long sfsr, unsigned long sfar)
void spitfire_insn_access_exception_tl1(struct pt_regs *regs, unsigned long sfsr, unsigned long sfar)
{
if (notify_die(DIE_TRAP_TL1, "instruction access exception tl1", regs,
0, 0x8, SIGTRAP) == NOTIFY_STOP)
return;
dump_tl1_traplog((struct tl1_traplog *)(regs + 1));
instruction_access_exception(regs, sfsr, sfar);
spitfire_insn_access_exception(regs, sfsr, sfar);
}
void data_access_exception(struct pt_regs *regs,
unsigned long sfsr, unsigned long sfar)
void spitfire_data_access_exception(struct pt_regs *regs, unsigned long sfsr, unsigned long sfar)
{
siginfo_t info;
@ -207,8 +205,8 @@ void data_access_exception(struct pt_regs *regs,
return;
}
/* Shit... */
printk("data_access_exception: SFSR[%016lx] SFAR[%016lx], going.\n",
sfsr, sfar);
printk("spitfire_data_access_exception: SFSR[%016lx] "
"SFAR[%016lx], going.\n", sfsr, sfar);
die_if_kernel("Dax", regs);
}
@ -220,6 +218,16 @@ void data_access_exception(struct pt_regs *regs,
force_sig_info(SIGSEGV, &info, current);
}
void spitfire_data_access_exception_tl1(struct pt_regs *regs, unsigned long sfsr, unsigned long sfar)
{
if (notify_die(DIE_TRAP_TL1, "data access exception tl1", regs,
0, 0x30, SIGTRAP) == NOTIFY_STOP)
return;
dump_tl1_traplog((struct tl1_traplog *)(regs + 1));
spitfire_data_access_exception(regs, sfsr, sfar);
}
#ifdef CONFIG_PCI
/* This is really pathetic... */
extern volatile int pci_poke_in_progress;
@ -253,54 +261,13 @@ static void spitfire_clean_and_reenable_l1_caches(void)
: "memory");
}
void do_iae(struct pt_regs *regs)
static void spitfire_enable_estate_errors(void)
{
siginfo_t info;
spitfire_clean_and_reenable_l1_caches();
if (notify_die(DIE_TRAP, "instruction access exception", regs,
0, 0x8, SIGTRAP) == NOTIFY_STOP)
return;
info.si_signo = SIGBUS;
info.si_errno = 0;
info.si_code = BUS_OBJERR;
info.si_addr = (void *)0;
info.si_trapno = 0;
force_sig_info(SIGBUS, &info, current);
}
void do_dae(struct pt_regs *regs)
{
siginfo_t info;
#ifdef CONFIG_PCI
if (pci_poke_in_progress && pci_poke_cpu == smp_processor_id()) {
spitfire_clean_and_reenable_l1_caches();
pci_poke_faulted = 1;
/* Why the fuck did they have to change this? */
if (tlb_type == cheetah || tlb_type == cheetah_plus)
regs->tpc += 4;
regs->tnpc = regs->tpc + 4;
return;
}
#endif
spitfire_clean_and_reenable_l1_caches();
if (notify_die(DIE_TRAP, "data access exception", regs,
0, 0x30, SIGTRAP) == NOTIFY_STOP)
return;
info.si_signo = SIGBUS;
info.si_errno = 0;
info.si_code = BUS_OBJERR;
info.si_addr = (void *)0;
info.si_trapno = 0;
force_sig_info(SIGBUS, &info, current);
__asm__ __volatile__("stxa %0, [%%g0] %1\n\t"
"membar #Sync"
: /* no outputs */
: "r" (ESTATE_ERR_ALL),
"i" (ASI_ESTATE_ERROR_EN));
}
static char ecc_syndrome_table[] = {
@ -338,65 +305,15 @@ static char ecc_syndrome_table[] = {
0x0b, 0x48, 0x48, 0x4b, 0x48, 0x4b, 0x4b, 0x4a
};
/* cee_trap in entry.S encodes AFSR/UDBH/UDBL error status
* in the following format. The AFAR is left as is, with
* reserved bits cleared, and is a raw 40-bit physical
* address.
*/
#define CE_STATUS_UDBH_UE (1UL << (43 + 9))
#define CE_STATUS_UDBH_CE (1UL << (43 + 8))
#define CE_STATUS_UDBH_ESYNDR (0xffUL << 43)
#define CE_STATUS_UDBH_SHIFT 43
#define CE_STATUS_UDBL_UE (1UL << (33 + 9))
#define CE_STATUS_UDBL_CE (1UL << (33 + 8))
#define CE_STATUS_UDBL_ESYNDR (0xffUL << 33)
#define CE_STATUS_UDBL_SHIFT 33
#define CE_STATUS_AFSR_MASK (0x1ffffffffUL)
#define CE_STATUS_AFSR_ME (1UL << 32)
#define CE_STATUS_AFSR_PRIV (1UL << 31)
#define CE_STATUS_AFSR_ISAP (1UL << 30)
#define CE_STATUS_AFSR_ETP (1UL << 29)
#define CE_STATUS_AFSR_IVUE (1UL << 28)
#define CE_STATUS_AFSR_TO (1UL << 27)
#define CE_STATUS_AFSR_BERR (1UL << 26)
#define CE_STATUS_AFSR_LDP (1UL << 25)
#define CE_STATUS_AFSR_CP (1UL << 24)
#define CE_STATUS_AFSR_WP (1UL << 23)
#define CE_STATUS_AFSR_EDP (1UL << 22)
#define CE_STATUS_AFSR_UE (1UL << 21)
#define CE_STATUS_AFSR_CE (1UL << 20)
#define CE_STATUS_AFSR_ETS (0xfUL << 16)
#define CE_STATUS_AFSR_ETS_SHIFT 16
#define CE_STATUS_AFSR_PSYND (0xffffUL << 0)
#define CE_STATUS_AFSR_PSYND_SHIFT 0
/* Layout of Ecache TAG Parity Syndrome of AFSR */
#define AFSR_ETSYNDROME_7_0 0x1UL /* E$-tag bus bits <7:0> */
#define AFSR_ETSYNDROME_15_8 0x2UL /* E$-tag bus bits <15:8> */
#define AFSR_ETSYNDROME_21_16 0x4UL /* E$-tag bus bits <21:16> */
#define AFSR_ETSYNDROME_24_22 0x8UL /* E$-tag bus bits <24:22> */
static char *syndrome_unknown = "<Unknown>";
asmlinkage void cee_log(unsigned long ce_status,
unsigned long afar,
struct pt_regs *regs)
static void spitfire_log_udb_syndrome(unsigned long afar, unsigned long udbh, unsigned long udbl, unsigned long bit)
{
char memmod_str[64];
char *p;
unsigned short scode, udb_reg;
unsigned short scode;
char memmod_str[64], *p;
printk(KERN_WARNING "CPU[%d]: Correctable ECC Error "
"AFSR[%lx] AFAR[%016lx] UDBL[%lx] UDBH[%lx]\n",
smp_processor_id(),
(ce_status & CE_STATUS_AFSR_MASK),
afar,
((ce_status >> CE_STATUS_UDBL_SHIFT) & 0x3ffUL),
((ce_status >> CE_STATUS_UDBH_SHIFT) & 0x3ffUL));
udb_reg = ((ce_status >> CE_STATUS_UDBL_SHIFT) & 0x3ffUL);
if (udb_reg & (1 << 8)) {
scode = ecc_syndrome_table[udb_reg & 0xff];
if (udbl & bit) {
scode = ecc_syndrome_table[udbl & 0xff];
if (prom_getunumber(scode, afar,
memmod_str, sizeof(memmod_str)) == -1)
p = syndrome_unknown;
@ -407,9 +324,8 @@ asmlinkage void cee_log(unsigned long ce_status,
smp_processor_id(), scode, p);
}
udb_reg = ((ce_status >> CE_STATUS_UDBH_SHIFT) & 0x3ffUL);
if (udb_reg & (1 << 8)) {
scode = ecc_syndrome_table[udb_reg & 0xff];
if (udbh & bit) {
scode = ecc_syndrome_table[udbh & 0xff];
if (prom_getunumber(scode, afar,
memmod_str, sizeof(memmod_str)) == -1)
p = syndrome_unknown;
@ -419,6 +335,127 @@ asmlinkage void cee_log(unsigned long ce_status,
"Memory Module \"%s\"\n",
smp_processor_id(), scode, p);
}
}
static void spitfire_cee_log(unsigned long afsr, unsigned long afar, unsigned long udbh, unsigned long udbl, int tl1, struct pt_regs *regs)
{
printk(KERN_WARNING "CPU[%d]: Correctable ECC Error "
"AFSR[%lx] AFAR[%016lx] UDBL[%lx] UDBH[%lx] TL>1[%d]\n",
smp_processor_id(), afsr, afar, udbl, udbh, tl1);
spitfire_log_udb_syndrome(afar, udbh, udbl, UDBE_CE);
/* We always log it, even if someone is listening for this
* trap.
*/
notify_die(DIE_TRAP, "Correctable ECC Error", regs,
0, TRAP_TYPE_CEE, SIGTRAP);
/* The Correctable ECC Error trap does not disable I/D caches. So
* we only have to restore the ESTATE Error Enable register.
*/
spitfire_enable_estate_errors();
}
static void spitfire_ue_log(unsigned long afsr, unsigned long afar, unsigned long udbh, unsigned long udbl, unsigned long tt, int tl1, struct pt_regs *regs)
{
siginfo_t info;
printk(KERN_WARNING "CPU[%d]: Uncorrectable Error AFSR[%lx] "
"AFAR[%lx] UDBL[%lx] UDBH[%ld] TT[%lx] TL>1[%d]\n",
smp_processor_id(), afsr, afar, udbl, udbh, tt, tl1);
/* XXX add more human friendly logging of the error status
* XXX as is implemented for cheetah
*/
spitfire_log_udb_syndrome(afar, udbh, udbl, UDBE_UE);
/* We always log it, even if someone is listening for this
* trap.
*/
notify_die(DIE_TRAP, "Uncorrectable Error", regs,
0, tt, SIGTRAP);
if (regs->tstate & TSTATE_PRIV) {
if (tl1)
dump_tl1_traplog((struct tl1_traplog *)(regs + 1));
die_if_kernel("UE", regs);
}
/* XXX need more intelligent processing here, such as is implemented
* XXX for cheetah errors, in fact if the E-cache still holds the
* XXX line with bad parity this will loop
*/
spitfire_clean_and_reenable_l1_caches();
spitfire_enable_estate_errors();
if (test_thread_flag(TIF_32BIT)) {
regs->tpc &= 0xffffffff;
regs->tnpc &= 0xffffffff;
}
info.si_signo = SIGBUS;
info.si_errno = 0;
info.si_code = BUS_OBJERR;
info.si_addr = (void *)0;
info.si_trapno = 0;
force_sig_info(SIGBUS, &info, current);
}
void spitfire_access_error(struct pt_regs *regs, unsigned long status_encoded, unsigned long afar)
{
unsigned long afsr, tt, udbh, udbl;
int tl1;
afsr = (status_encoded & SFSTAT_AFSR_MASK) >> SFSTAT_AFSR_SHIFT;
tt = (status_encoded & SFSTAT_TRAP_TYPE) >> SFSTAT_TRAP_TYPE_SHIFT;
tl1 = (status_encoded & SFSTAT_TL_GT_ONE) ? 1 : 0;
udbl = (status_encoded & SFSTAT_UDBL_MASK) >> SFSTAT_UDBL_SHIFT;
udbh = (status_encoded & SFSTAT_UDBH_MASK) >> SFSTAT_UDBH_SHIFT;
#ifdef CONFIG_PCI
if (tt == TRAP_TYPE_DAE &&
pci_poke_in_progress && pci_poke_cpu == smp_processor_id()) {
spitfire_clean_and_reenable_l1_caches();
spitfire_enable_estate_errors();
pci_poke_faulted = 1;
regs->tnpc = regs->tpc + 4;
return;
}
#endif
if (afsr & SFAFSR_UE)
spitfire_ue_log(afsr, afar, udbh, udbl, tt, tl1, regs);
if (tt == TRAP_TYPE_CEE) {
/* Handle the case where we took a CEE trap, but ACK'd
* only the UE state in the UDB error registers.
*/
if (afsr & SFAFSR_UE) {
if (udbh & UDBE_CE) {
__asm__ __volatile__(
"stxa %0, [%1] %2\n\t"
"membar #Sync"
: /* no outputs */
: "r" (udbh & UDBE_CE),
"r" (0x0), "i" (ASI_UDB_ERROR_W));
}
if (udbl & UDBE_CE) {
__asm__ __volatile__(
"stxa %0, [%1] %2\n\t"
"membar #Sync"
: /* no outputs */
: "r" (udbl & UDBE_CE),
"r" (0x18), "i" (ASI_UDB_ERROR_W));
}
}
spitfire_cee_log(afsr, afar, udbh, udbl, tl1, regs);
}
}
int cheetah_pcache_forced_on;
@ -2127,6 +2164,9 @@ void __init trap_init(void)
TI_PRE_COUNT != offsetof(struct thread_info, preempt_count) ||
TI_NEW_CHILD != offsetof(struct thread_info, new_child) ||
TI_SYS_NOERROR != offsetof(struct thread_info, syscall_noerror) ||
TI_RESTART_BLOCK != offsetof(struct thread_info, restart_block) ||
TI_KUNA_REGS != offsetof(struct thread_info, kern_una_regs) ||
TI_KUNA_INSN != offsetof(struct thread_info, kern_una_insn) ||
TI_FPREGS != offsetof(struct thread_info, fpregs) ||
(TI_FPREGS & (64 - 1)))
thread_info_offsets_are_bolixed_dave();

27
arch/sparc64/kernel/ttable.S
View File

@ -18,9 +18,10 @@ sparc64_ttable_tl0:
tl0_resv000: BOOT_KERNEL BTRAP(0x1) BTRAP(0x2) BTRAP(0x3)
tl0_resv004: BTRAP(0x4) BTRAP(0x5) BTRAP(0x6) BTRAP(0x7)
tl0_iax: membar #Sync
TRAP_NOSAVE_7INSNS(__do_instruction_access_exception)
TRAP_NOSAVE_7INSNS(__spitfire_insn_access_exception)
tl0_resv009: BTRAP(0x9)
tl0_iae: TRAP(do_iae)
tl0_iae: membar #Sync
TRAP_NOSAVE_7INSNS(__spitfire_access_error)
tl0_resv00b: BTRAP(0xb) BTRAP(0xc) BTRAP(0xd) BTRAP(0xe) BTRAP(0xf)
tl0_ill: membar #Sync
TRAP_7INSNS(do_illegal_instruction)
@ -36,9 +37,10 @@ tl0_cwin: CLEAN_WINDOW
tl0_div0: TRAP(do_div0)
tl0_resv029: BTRAP(0x29) BTRAP(0x2a) BTRAP(0x2b) BTRAP(0x2c) BTRAP(0x2d) BTRAP(0x2e)
tl0_resv02f: BTRAP(0x2f)
tl0_dax: TRAP_NOSAVE(__do_data_access_exception)
tl0_dax: TRAP_NOSAVE(__spitfire_data_access_exception)
tl0_resv031: BTRAP(0x31)
tl0_dae: TRAP(do_dae)
tl0_dae: membar #Sync
TRAP_NOSAVE_7INSNS(__spitfire_access_error)
tl0_resv033: BTRAP(0x33)
tl0_mna: TRAP_NOSAVE(do_mna)
tl0_lddfmna: TRAP_NOSAVE(do_lddfmna)
@ -73,7 +75,8 @@ tl0_resv05c: BTRAP(0x5c) BTRAP(0x5d) BTRAP(0x5e) BTRAP(0x5f)
tl0_ivec: TRAP_IVEC
tl0_paw: TRAP(do_paw)
tl0_vaw: TRAP(do_vaw)
tl0_cee: TRAP_NOSAVE(cee_trap)
tl0_cee: membar #Sync
TRAP_NOSAVE_7INSNS(__spitfire_cee_trap)
tl0_iamiss:
#include "itlb_base.S"
tl0_damiss:
@ -175,9 +178,10 @@ tl0_resv1f0: BTRAPS(0x1f0) BTRAPS(0x1f8)
sparc64_ttable_tl1:
tl1_resv000: BOOT_KERNEL BTRAPTL1(0x1) BTRAPTL1(0x2) BTRAPTL1(0x3)
tl1_resv004: BTRAPTL1(0x4) BTRAPTL1(0x5) BTRAPTL1(0x6) BTRAPTL1(0x7)
tl1_iax: TRAP_NOSAVE(__do_instruction_access_exception_tl1)
tl1_iax: TRAP_NOSAVE(__spitfire_insn_access_exception_tl1)
tl1_resv009: BTRAPTL1(0x9)
tl1_iae: TRAPTL1(do_iae_tl1)
tl1_iae: membar #Sync
TRAP_NOSAVE_7INSNS(__spitfire_access_error)
tl1_resv00b: BTRAPTL1(0xb) BTRAPTL1(0xc) BTRAPTL1(0xd) BTRAPTL1(0xe) BTRAPTL1(0xf)
tl1_ill: TRAPTL1(do_ill_tl1)
tl1_privop: BTRAPTL1(0x11)
@ -193,9 +197,10 @@ tl1_cwin: CLEAN_WINDOW
tl1_div0: TRAPTL1(do_div0_tl1)
tl1_resv029: BTRAPTL1(0x29) BTRAPTL1(0x2a) BTRAPTL1(0x2b) BTRAPTL1(0x2c)
tl1_resv02d: BTRAPTL1(0x2d) BTRAPTL1(0x2e) BTRAPTL1(0x2f)
tl1_dax: TRAP_NOSAVE(__do_data_access_exception_tl1)
tl1_dax: TRAP_NOSAVE(__spitfire_data_access_exception_tl1)
tl1_resv031: BTRAPTL1(0x31)
tl1_dae: TRAPTL1(do_dae_tl1)
tl1_dae: membar #Sync
TRAP_NOSAVE_7INSNS(__spitfire_access_error)
tl1_resv033: BTRAPTL1(0x33)
tl1_mna: TRAP_NOSAVE(do_mna)
tl1_lddfmna: TRAPTL1(do_lddfmna_tl1)
@ -219,8 +224,8 @@ tl1_paw: TRAPTL1(do_paw_tl1)
tl1_vaw: TRAPTL1(do_vaw_tl1)
/* The grotty trick to save %g1 into current->thread.cee_stuff
* is because when we take this trap we could be interrupting trap
* code already using the trap alternate global registers.
* is because when we take this trap we could be interrupting
* trap code already using the trap alternate global registers.
*
* We cross our fingers and pray that this store/load does
* not cause yet another CEE trap.

153
arch/sparc64/kernel/una_asm.S Normal file
View File

@ -0,0 +1,153 @@
/* una_asm.S: Kernel unaligned trap assembler helpers.
*
* Copyright (C) 1996,2005 David S. Miller (davem@davemloft.net)
* Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
*/
.text
kernel_unaligned_trap_fault:
call kernel_mna_trap_fault
nop
retl
nop
.size kern_unaligned_trap_fault, .-kern_unaligned_trap_fault
.globl __do_int_store
__do_int_store:
rd %asi, %o4
wr %o3, 0, %asi
ldx [%o2], %g3
cmp %o1, 2
be,pn %icc, 2f
cmp %o1, 4
be,pt %icc, 1f
srlx %g3, 24, %g2
srlx %g3, 56, %g1
srlx %g3, 48, %g7
4: stba %g1, [%o0] %asi
srlx %g3, 40, %g1
5: stba %g7, [%o0 + 1] %asi
srlx %g3, 32, %g7
6: stba %g1, [%o0 + 2] %asi
7: stba %g7, [%o0 + 3] %asi
srlx %g3, 16, %g1
8: stba %g2, [%o0 + 4] %asi
srlx %g3, 8, %g7
9: stba %g1, [%o0 + 5] %asi
10: stba %g7, [%o0 + 6] %asi
ba,pt %xcc, 0f
11: stba %g3, [%o0 + 7] %asi
1: srl %g3, 16, %g7
12: stba %g2, [%o0] %asi
srl %g3, 8, %g2
13: stba %g7, [%o0 + 1] %asi
14: stba %g2, [%o0 + 2] %asi
ba,pt %xcc, 0f
15: stba %g3, [%o0 + 3] %asi
2: srl %g3, 8, %g2
16: stba %g2, [%o0] %asi
17: stba %g3, [%o0 + 1] %asi
0:
wr %o4, 0x0, %asi
retl
nop
.size __do_int_store, .-__do_int_store
.section __ex_table
.word 4b, kernel_unaligned_trap_fault
.word 5b, kernel_unaligned_trap_fault
.word 6b, kernel_unaligned_trap_fault
.word 7b, kernel_unaligned_trap_fault
.word 8b, kernel_unaligned_trap_fault
.word 9b, kernel_unaligned_trap_fault
.word 10b, kernel_unaligned_trap_fault
.word 11b, kernel_unaligned_trap_fault
.word 12b, kernel_unaligned_trap_fault
.word 13b, kernel_unaligned_trap_fault
.word 14b, kernel_unaligned_trap_fault
.word 15b, kernel_unaligned_trap_fault
.word 16b, kernel_unaligned_trap_fault
.word 17b, kernel_unaligned_trap_fault
.previous
.globl do_int_load
do_int_load:
rd %asi, %o5
wr %o4, 0, %asi
cmp %o1, 8
bge,pn %icc, 9f
cmp %o1, 4
be,pt %icc, 6f
4: lduba [%o2] %asi, %g2
5: lduba [%o2 + 1] %asi, %g3
sll %g2, 8, %g2
brz,pt %o3, 3f
add %g2, %g3, %g2
sllx %g2, 48, %g2
srax %g2, 48, %g2
3: ba,pt %xcc, 0f
stx %g2, [%o0]
6: lduba [%o2 + 1] %asi, %g3
sll %g2, 24, %g2
7: lduba [%o2 + 2] %asi, %g7
sll %g3, 16, %g3
8: lduba [%o2 + 3] %asi, %g1
sll %g7, 8, %g7
or %g2, %g3, %g2
or %g7, %g1, %g7
or %g2, %g7, %g2
brnz,a,pt %o3, 3f
sra %g2, 0, %g2
3: ba,pt %xcc, 0f
stx %g2, [%o0]
9: lduba [%o2] %asi, %g2
10: lduba [%o2 + 1] %asi, %g3
sllx %g2, 56, %g2
11: lduba [%o2 + 2] %asi, %g7
sllx %g3, 48, %g3
12: lduba [%o2 + 3] %asi, %g1
sllx %g7, 40, %g7
sllx %g1, 32, %g1
or %g2, %g3, %g2
or %g7, %g1, %g7
13: lduba [%o2 + 4] %asi, %g3
or %g2, %g7, %g7
14: lduba [%o2 + 5] %asi, %g1
sllx %g3, 24, %g3
15: lduba [%o2 + 6] %asi, %g2
sllx %g1, 16, %g1
or %g7, %g3, %g7
16: lduba [%o2 + 7] %asi, %g3
sllx %g2, 8, %g2
or %g7, %g1, %g7
or %g2, %g3, %g2
or %g7, %g2, %g7
cmp %o1, 8
be,a,pt %icc, 0f
stx %g7, [%o0]
srlx %g7, 32, %g2
sra %g7, 0, %g7
stx %g2, [%o0]
stx %g7, [%o0 + 8]
0:
wr %o5, 0x0, %asi
retl
nop
.size __do_int_load, .-__do_int_load
.section __ex_table
.word 4b, kernel_unaligned_trap_fault
.word 5b, kernel_unaligned_trap_fault
.word 6b, kernel_unaligned_trap_fault
.word 7b, kernel_unaligned_trap_fault
.word 8b, kernel_unaligned_trap_fault
.word 9b, kernel_unaligned_trap_fault
.word 10b, kernel_unaligned_trap_fault
.word 11b, kernel_unaligned_trap_fault
.word 12b, kernel_unaligned_trap_fault
.word 13b, kernel_unaligned_trap_fault
.word 14b, kernel_unaligned_trap_fault
.word 15b, kernel_unaligned_trap_fault
.word 16b, kernel_unaligned_trap_fault
.previous

273
arch/sparc64/kernel/unaligned.c
View File

@ -180,169 +180,28 @@ static void __attribute_used__ unaligned_panic(char *str, struct pt_regs *regs)
die_if_kernel(str, regs);
}
#define do_integer_load(dest_reg, size, saddr, is_signed, asi, errh) ({ \
__asm__ __volatile__ ( \
"wr %4, 0, %%asi\n\t" \
"cmp %1, 8\n\t" \
"bge,pn %%icc, 9f\n\t" \
" cmp %1, 4\n\t" \
"be,pt %%icc, 6f\n" \
"4:\t" " lduba [%2] %%asi, %%l1\n" \
"5:\t" "lduba [%2 + 1] %%asi, %%l2\n\t" \
"sll %%l1, 8, %%l1\n\t" \
"brz,pt %3, 3f\n\t" \
" add %%l1, %%l2, %%l1\n\t" \
"sllx %%l1, 48, %%l1\n\t" \
"srax %%l1, 48, %%l1\n" \
"3:\t" "ba,pt %%xcc, 0f\n\t" \
" stx %%l1, [%0]\n" \
"6:\t" "lduba [%2 + 1] %%asi, %%l2\n\t" \
"sll %%l1, 24, %%l1\n" \
"7:\t" "lduba [%2 + 2] %%asi, %%g7\n\t" \
"sll %%l2, 16, %%l2\n" \
"8:\t" "lduba [%2 + 3] %%asi, %%g1\n\t" \
"sll %%g7, 8, %%g7\n\t" \
"or %%l1, %%l2, %%l1\n\t" \
"or %%g7, %%g1, %%g7\n\t" \
"or %%l1, %%g7, %%l1\n\t" \
"brnz,a,pt %3, 3f\n\t" \
" sra %%l1, 0, %%l1\n" \
"3:\t" "ba,pt %%xcc, 0f\n\t" \
" stx %%l1, [%0]\n" \
"9:\t" "lduba [%2] %%asi, %%l1\n" \
"10:\t" "lduba [%2 + 1] %%asi, %%l2\n\t" \
"sllx %%l1, 56, %%l1\n" \
"11:\t" "lduba [%2 + 2] %%asi, %%g7\n\t" \
"sllx %%l2, 48, %%l2\n" \
"12:\t" "lduba [%2 + 3] %%asi, %%g1\n\t" \
"sllx %%g7, 40, %%g7\n\t" \
"sllx %%g1, 32, %%g1\n\t" \
"or %%l1, %%l2, %%l1\n\t" \
"or %%g7, %%g1, %%g7\n" \
"13:\t" "lduba [%2 + 4] %%asi, %%l2\n\t" \
"or %%l1, %%g7, %%g7\n" \
"14:\t" "lduba [%2 + 5] %%asi, %%g1\n\t" \
"sllx %%l2, 24, %%l2\n" \
"15:\t" "lduba [%2 + 6] %%asi, %%l1\n\t" \
"sllx %%g1, 16, %%g1\n\t" \
"or %%g7, %%l2, %%g7\n" \
"16:\t" "lduba [%2 + 7] %%asi, %%l2\n\t" \
"sllx %%l1, 8, %%l1\n\t" \
"or %%g7, %%g1, %%g7\n\t" \
"or %%l1, %%l2, %%l1\n\t" \
"or %%g7, %%l1, %%g7\n\t" \
"cmp %1, 8\n\t" \
"be,a,pt %%icc, 0f\n\t" \
" stx %%g7, [%0]\n\t" \
"srlx %%g7, 32, %%l1\n\t" \
"sra %%g7, 0, %%g7\n\t" \
"stx %%l1, [%0]\n\t" \
"stx %%g7, [%0 + 8]\n" \
"0:\n\t" \
"wr %%g0, %5, %%asi\n\n\t" \
".section __ex_table\n\t" \
".word 4b, " #errh "\n\t" \
".word 5b, " #errh "\n\t" \
".word 6b, " #errh "\n\t" \
".word 7b, " #errh "\n\t" \
".word 8b, " #errh "\n\t" \
".word 9b, " #errh "\n\t" \
".word 10b, " #errh "\n\t" \
".word 11b, " #errh "\n\t" \
".word 12b, " #errh "\n\t" \
".word 13b, " #errh "\n\t" \
".word 14b, " #errh "\n\t" \
".word 15b, " #errh "\n\t" \
".word 16b, " #errh "\n\n\t" \
".previous\n\t" \
: : "r" (dest_reg), "r" (size), "r" (saddr), "r" (is_signed), \
"r" (asi), "i" (ASI_AIUS) \
: "l1", "l2", "g7", "g1", "cc"); \
})
extern void do_int_load(unsigned long *dest_reg, int size,
unsigned long *saddr, int is_signed, int asi);
#define store_common(dst_addr, size, src_val, asi, errh) ({ \
__asm__ __volatile__ ( \
"wr %3, 0, %%asi\n\t" \
"ldx [%2], %%l1\n" \
"cmp %1, 2\n\t" \
"be,pn %%icc, 2f\n\t" \
" cmp %1, 4\n\t" \
"be,pt %%icc, 1f\n\t" \
" srlx %%l1, 24, %%l2\n\t" \
"srlx %%l1, 56, %%g1\n\t" \
"srlx %%l1, 48, %%g7\n" \
"4:\t" "stba %%g1, [%0] %%asi\n\t" \
"srlx %%l1, 40, %%g1\n" \
"5:\t" "stba %%g7, [%0 + 1] %%asi\n\t" \
"srlx %%l1, 32, %%g7\n" \
"6:\t" "stba %%g1, [%0 + 2] %%asi\n" \
"7:\t" "stba %%g7, [%0 + 3] %%asi\n\t" \
"srlx %%l1, 16, %%g1\n" \
"8:\t" "stba %%l2, [%0 + 4] %%asi\n\t" \
"srlx %%l1, 8, %%g7\n" \
"9:\t" "stba %%g1, [%0 + 5] %%asi\n" \
"10:\t" "stba %%g7, [%0 + 6] %%asi\n\t" \
"ba,pt %%xcc, 0f\n" \
"11:\t" " stba %%l1, [%0 + 7] %%asi\n" \
"1:\t" "srl %%l1, 16, %%g7\n" \
"12:\t" "stba %%l2, [%0] %%asi\n\t" \
"srl %%l1, 8, %%l2\n" \
"13:\t" "stba %%g7, [%0 + 1] %%asi\n" \
"14:\t" "stba %%l2, [%0 + 2] %%asi\n\t" \
"ba,pt %%xcc, 0f\n" \
"15:\t" " stba %%l1, [%0 + 3] %%asi\n" \
"2:\t" "srl %%l1, 8, %%l2\n" \
"16:\t" "stba %%l2, [%0] %%asi\n" \
"17:\t" "stba %%l1, [%0 + 1] %%asi\n" \
"0:\n\t" \
"wr %%g0, %4, %%asi\n\n\t" \
".section __ex_table\n\t" \
".word 4b, " #errh "\n\t" \
".word 5b, " #errh "\n\t" \
".word 6b, " #errh "\n\t" \
".word 7b, " #errh "\n\t" \
".word 8b, " #errh "\n\t" \
".word 9b, " #errh "\n\t" \
".word 10b, " #errh "\n\t" \
".word 11b, " #errh "\n\t" \
".word 12b, " #errh "\n\t" \
".word 13b, " #errh "\n\t" \
".word 14b, " #errh "\n\t" \
".word 15b, " #errh "\n\t" \
".word 16b, " #errh "\n\t" \
".word 17b, " #errh "\n\n\t" \
".previous\n\t" \
: : "r" (dst_addr), "r" (size), "r" (src_val), "r" (asi), "i" (ASI_AIUS)\
: "l1", "l2", "g7", "g1", "cc"); \
})
extern void __do_int_store(unsigned long *dst_addr, int size,
unsigned long *src_val, int asi);
#define do_integer_store(reg_num, size, dst_addr, regs, asi, errh) ({ \
unsigned long zero = 0; \
unsigned long *src_val = &zero; \
\
if (size == 16) { \
size = 8; \
zero = (((long)(reg_num ? \
(unsigned)fetch_reg(reg_num, regs) : 0)) << 32) | \
(unsigned)fetch_reg(reg_num + 1, regs); \
} else if (reg_num) src_val = fetch_reg_addr(reg_num, regs); \
store_common(dst_addr, size, src_val, asi, errh); \
})
static inline void do_int_store(int reg_num, int size, unsigned long *dst_addr,
struct pt_regs *regs, int asi)
{
unsigned long zero = 0;
unsigned long *src_val = &zero;
extern void smp_capture(void);
extern void smp_release(void);
#define do_atomic(srcdest_reg, mem, errh) ({ \
unsigned long flags, tmp; \
\
smp_capture(); \
local_irq_save(flags); \
tmp = *srcdest_reg; \
do_integer_load(srcdest_reg, 4, mem, 0, errh); \
store_common(mem, 4, &tmp, errh); \
local_irq_restore(flags); \
smp_release(); \
})
if (size == 16) {
size = 8;
zero = (((long)(reg_num ?
(unsigned)fetch_reg(reg_num, regs) : 0)) << 32) |
(unsigned)fetch_reg(reg_num + 1, regs);
} else if (reg_num) {
src_val = fetch_reg_addr(reg_num, regs);
}
__do_int_store(dst_addr, size, src_val, asi);
}
static inline void advance(struct pt_regs *regs)
{
@ -364,24 +223,29 @@ static inline int ok_for_kernel(unsigned int insn)
return !floating_point_load_or_store_p(insn);
}
void kernel_mna_trap_fault(struct pt_regs *regs, unsigned int insn) __asm__ ("kernel_mna_trap_fault");
void kernel_mna_trap_fault(struct pt_regs *regs, unsigned int insn)
void kernel_mna_trap_fault(void)
{
unsigned long g2 = regs->u_regs [UREG_G2];
struct pt_regs *regs = current_thread_info()->kern_una_regs;
unsigned int insn = current_thread_info()->kern_una_insn;
unsigned long g2 = regs->u_regs[UREG_G2];
unsigned long fixup = search_extables_range(regs->tpc, &g2);
if (!fixup) {
unsigned long address = compute_effective_address(regs, insn, ((insn >> 25) & 0x1f));
unsigned long address;
address = compute_effective_address(regs, insn,
((insn >> 25) & 0x1f));
if (address < PAGE_SIZE) {
printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference in mna handler");
printk(KERN_ALERT "Unable to handle kernel NULL "
"pointer dereference in mna handler");
} else
printk(KERN_ALERT "Unable to handle kernel paging request in mna handler");
printk(KERN_ALERT "Unable to handle kernel paging "
"request in mna handler");
printk(KERN_ALERT " at virtual address %016lx\n",address);
printk(KERN_ALERT "current->{mm,active_mm}->context = %016lx\n",
printk(KERN_ALERT "current->{active_,}mm->context = %016lx\n",
(current->mm ? CTX_HWBITS(current->mm->context) :
CTX_HWBITS(current->active_mm->context)));
printk(KERN_ALERT "current->{mm,active_mm}->pgd = %016lx\n",
printk(KERN_ALERT "current->{active_,}mm->pgd = %016lx\n",
(current->mm ? (unsigned long) current->mm->pgd :
(unsigned long) current->active_mm->pgd));
die_if_kernel("Oops", regs);
@ -400,48 +264,41 @@ asmlinkage void kernel_unaligned_trap(struct pt_regs *regs, unsigned int insn, u
enum direction dir = decode_direction(insn);
int size = decode_access_size(insn);
current_thread_info()->kern_una_regs = regs;
current_thread_info()->kern_una_insn = insn;
if (!ok_for_kernel(insn) || dir == both) {
printk("Unsupported unaligned load/store trap for kernel at <%016lx>.\n",
regs->tpc);
unaligned_panic("Kernel does fpu/atomic unaligned load/store.", regs);
printk("Unsupported unaligned load/store trap for kernel "
"at <%016lx>.\n", regs->tpc);
unaligned_panic("Kernel does fpu/atomic "
"unaligned load/store.", regs);
__asm__ __volatile__ ("\n"
"kernel_unaligned_trap_fault:\n\t"
"mov %0, %%o0\n\t"
"call kernel_mna_trap_fault\n\t"
" mov %1, %%o1\n\t"
:
: "r" (regs), "r" (insn)
: "o0", "o1", "o2", "o3", "o4", "o5", "o7",
"g1", "g2", "g3", "g4", "g7", "cc");
kernel_mna_trap_fault();
} else {
unsigned long addr = compute_effective_address(regs, insn, ((insn >> 25) & 0x1f));
unsigned long addr;
addr = compute_effective_address(regs, insn,
((insn >> 25) & 0x1f));
#ifdef DEBUG_MNA
printk("KMNA: pc=%016lx [dir=%s addr=%016lx size=%d] retpc[%016lx]\n",
regs->tpc, dirstrings[dir], addr, size, regs->u_regs[UREG_RETPC]);
printk("KMNA: pc=%016lx [dir=%s addr=%016lx size=%d] "
"retpc[%016lx]\n",
regs->tpc, dirstrings[dir], addr, size,
regs->u_regs[UREG_RETPC]);
#endif
switch (dir) {
case load:
do_integer_load(fetch_reg_addr(((insn>>25)&0x1f), regs),
size, (unsigned long *) addr,
decode_signedness(insn), decode_asi(insn, regs),
kernel_unaligned_trap_fault);
do_int_load(fetch_reg_addr(((insn>>25)&0x1f), regs),
size, (unsigned long *) addr,
decode_signedness(insn),
decode_asi(insn, regs));
break;
case store:
do_integer_store(((insn>>25)&0x1f), size,
(unsigned long *) addr, regs,
decode_asi(insn, regs),
kernel_unaligned_trap_fault);
do_int_store(((insn>>25)&0x1f), size,
(unsigned long *) addr, regs,
decode_asi(insn, regs));
break;
#if 0 /* unsupported */
case both:
do_atomic(fetch_reg_addr(((insn>>25)&0x1f), regs),
(unsigned long *) addr,
kernel_unaligned_trap_fault);
break;
#endif
default:
panic("Impossible kernel unaligned trap.");
/* Not reached... */
@ -492,9 +349,9 @@ int handle_popc(u32 insn, struct pt_regs *regs)
extern void do_fpother(struct pt_regs *regs);
extern void do_privact(struct pt_regs *regs);
extern void data_access_exception(struct pt_regs *regs,
unsigned long sfsr,
unsigned long sfar);
extern void spitfire_data_access_exception(struct pt_regs *regs,
unsigned long sfsr,
unsigned long sfar);
int handle_ldf_stq(u32 insn, struct pt_regs *regs)
{
@ -537,14 +394,14 @@ int handle_ldf_stq(u32 insn, struct pt_regs *regs)
break;
}
default:
data_access_exception(regs, 0, addr);
spitfire_data_access_exception(regs, 0, addr);
return 1;
}
if (put_user (first >> 32, (u32 __user *)addr) ||
__put_user ((u32)first, (u32 __user *)(addr + 4)) ||
__put_user (second >> 32, (u32 __user *)(addr + 8)) ||
__put_user ((u32)second, (u32 __user *)(addr + 12))) {
data_access_exception(regs, 0, addr);
spitfire_data_access_exception(regs, 0, addr);
return 1;
}
} else {
@ -557,7 +414,7 @@ int handle_ldf_stq(u32 insn, struct pt_regs *regs)
do_privact(regs);
return 1;
} else if (asi > ASI_SNFL) {
data_access_exception(regs, 0, addr);
spitfire_data_access_exception(regs, 0, addr);
return 1;
}
switch (insn & 0x180000) {
@ -574,7 +431,7 @@ int handle_ldf_stq(u32 insn, struct pt_regs *regs)
err |= __get_user (data[i], (u32 __user *)(addr + 4*i));
}
if (err && !(asi & 0x2 /* NF */)) {
data_access_exception(regs, 0, addr);
spitfire_data_access_exception(regs, 0, addr);
return 1;
}
if (asi & 0x8) /* Little */ {
@ -677,7 +534,7 @@ void handle_lddfmna(struct pt_regs *regs, unsigned long sfar, unsigned long sfsr
*(u64 *)(f->regs + freg) = value;
current_thread_info()->fpsaved[0] |= flag;
} else {
daex: data_access_exception(regs, sfsr, sfar);
daex: spitfire_data_access_exception(regs, sfsr, sfar);
return;
}
advance(regs);
@ -721,7 +578,7 @@ void handle_stdfmna(struct pt_regs *regs, unsigned long sfar, unsigned long sfsr
__put_user ((u32)value, (u32 __user *)(sfar + 4)))
goto daex;
} else {
daex: data_access_exception(regs, sfsr, sfar);
daex: spitfire_data_access_exception(regs, sfsr, sfar);
return;
}
advance(regs);

Some files were not shown because too many files have changed in this diff Show More