diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 04ce372bb10..2b58363a894 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -11,7 +11,8 @@ prcm-common = prcm.o powerdomain.o clock-common = clock.o clock_common_data.o \ clockdomain.o clkt_dpll.o \ clkt_clksel.o -clock-omap2xxx = clkt2xxx_dpllcore.o +clock-omap2xxx = clkt2xxx_dpllcore.o \ + clkt2xxx_virt_prcm_set.o obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common) \ $(clock-omap2xxx) diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c new file mode 100644 index 00000000000..3b1eac4d539 --- /dev/null +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -0,0 +1,254 @@ +/* + * OMAP2xxx DVFS virtual clock functions + * + * Copyright (C) 2005-2008 Texas Instruments, Inc. + * Copyright (C) 2004-2010 Nokia Corporation + * + * Contacts: + * Richard Woodruff + * Paul Walmsley + * + * Based on earlier work by Tuukka Tikkanen, Tony Lindgren, + * Gordon McNutt and RidgeRun, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * XXX Some of this code should be replaceable by the upcoming OPP layer + * code. However, some notion of "rate set" is probably still necessary + * for OMAP2xxx at least. Rate sets should be generalized so they can be + * used for any OMAP chip, not just OMAP2xxx. In particular, Richard Woodruff + * has in the past expressed a preference to use rate sets for OPP changes, + * rather than dynamically recalculating the clock tree, so if someone wants + * this badly enough to write the code to handle it, we should support it + * as an option. + */ +#undef DEBUG + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "clock.h" +#include "clock2xxx.h" +#include "opp2xxx.h" +#include "cm.h" +#include "cm-regbits-24xx.h" + +const struct prcm_config *curr_prcm_set; +const struct prcm_config *rate_table; + +/** + * omap2_table_mpu_recalc - just return the MPU speed + * @clk: virt_prcm_set struct clk + * + * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set. + */ +unsigned long omap2_table_mpu_recalc(struct clk *clk) +{ + return curr_prcm_set->mpu_speed; +} + +/* + * Look for a rate equal or less than the target rate given a configuration set. + * + * What's not entirely clear is "which" field represents the key field. + * Some might argue L3-DDR, others ARM, others IVA. This code is simple and + * just uses the ARM rates. + */ +long omap2_round_to_table_rate(struct clk *clk, unsigned long rate) +{ + const struct prcm_config *ptr; + long highest_rate; + long sys_ck_rate; + + sys_ck_rate = clk_get_rate(sclk); + + highest_rate = -EINVAL; + + for (ptr = rate_table; ptr->mpu_speed; ptr++) { + if (!(ptr->flags & cpu_mask)) + continue; + if (ptr->xtal_speed != sys_ck_rate) + continue; + + highest_rate = ptr->mpu_speed; + + /* Can check only after xtal frequency check */ + if (ptr->mpu_speed <= rate) + break; + } + return highest_rate; +} + +/* Sets basic clocks based on the specified rate */ +int omap2_select_table_rate(struct clk *clk, unsigned long rate) +{ + u32 cur_rate, done_rate, bypass = 0, tmp; + const struct prcm_config *prcm; + unsigned long found_speed = 0; + unsigned long flags; + long sys_ck_rate; + + sys_ck_rate = clk_get_rate(sclk); + + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + + if (prcm->xtal_speed != sys_ck_rate) + continue; + + if (prcm->mpu_speed <= rate) { + found_speed = prcm->mpu_speed; + break; + } + } + + if (!found_speed) { + printk(KERN_INFO "Could not set MPU rate to %luMHz\n", + rate / 1000000); + return -EINVAL; + } + + curr_prcm_set = prcm; + cur_rate = omap2xxx_clk_get_core_rate(dclk); + + if (prcm->dpll_speed == cur_rate / 2) { + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); + } else if (prcm->dpll_speed == cur_rate * 2) { + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); + } else if (prcm->dpll_speed != cur_rate) { + local_irq_save(flags); + + if (prcm->dpll_speed == prcm->xtal_speed) + bypass = 1; + + if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) == + CORE_CLK_SRC_DPLL_X2) + done_rate = CORE_CLK_SRC_DPLL_X2; + else + done_rate = CORE_CLK_SRC_DPLL; + + /* MPU divider */ + cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL); + + /* dsp + iva1 div(2420), iva2.1(2430) */ + cm_write_mod_reg(prcm->cm_clksel_dsp, + OMAP24XX_DSP_MOD, CM_CLKSEL); + + cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL); + + /* Major subsystem dividers */ + tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK; + cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, + CM_CLKSEL1); + + if (cpu_is_omap2430()) + cm_write_mod_reg(prcm->cm_clksel_mdm, + OMAP2430_MDM_MOD, CM_CLKSEL); + + /* x2 to enter omap2xxx_sdrc_init_params() */ + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); + + omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr, + bypass); + + omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked()); + omap2xxx_sdrc_reprogram(done_rate, 0); + + local_irq_restore(flags); + } + + return 0; +} + +#ifdef CONFIG_CPU_FREQ +/* + * Walk PRCM rate table and fillout cpufreq freq_table + * XXX This should be replaced by an OPP layer in the near future + */ +static struct cpufreq_frequency_table *freq_table; + +void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) +{ + const struct prcm_config *prcm; + long sys_ck_rate; + int i = 0; + int tbl_sz = 0; + + if (!cpu_is_omap24xx()) + return; + + sys_ck_rate = clk_get_rate(sclk); + + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + if (prcm->xtal_speed != sys_ck_rate) + continue; + + /* don't put bypass rates in table */ + if (prcm->dpll_speed == prcm->xtal_speed) + continue; + + tbl_sz++; + } + + /* + * XXX Ensure that we're doing what CPUFreq expects for this error + * case and the following one + */ + if (tbl_sz == 0) { + pr_warning("%s: no matching entries in rate_table\n", + __func__); + return; + } + + /* Include the CPUFREQ_TABLE_END terminator entry */ + tbl_sz++; + + freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz, + GFP_ATOMIC); + if (!freq_table) { + pr_err("%s: could not kzalloc frequency table\n", __func__); + return; + } + + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + if (prcm->xtal_speed != sys_ck_rate) + continue; + + /* don't put bypass rates in table */ + if (prcm->dpll_speed == prcm->xtal_speed) + continue; + + freq_table[i].index = i; + freq_table[i].frequency = prcm->mpu_speed / 1000; + i++; + } + + freq_table[i].index = i; + freq_table[i].frequency = CPUFREQ_TABLE_END; + + *table = &freq_table[0]; +} + +void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) +{ + if (!cpu_is_omap24xx()) + return; + + kfree(freq_table); +} + +#endif diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c index 419ae80fa1d..11d6edb0b32 100644 --- a/arch/arm/mach-omap2/clock2xxx.c +++ b/arch/arm/mach-omap2/clock2xxx.c @@ -54,9 +54,6 @@ #define APLLS_CLKIN_13MHZ 2 #define APLLS_CLKIN_12MHZ 3 -const struct prcm_config *curr_prcm_set; -const struct prcm_config *rate_table; - struct clk *vclk, *sclk, *dclk; void __iomem *prcm_clksrc_ctrl; @@ -185,214 +182,6 @@ const struct clkops clkops_apll54 = { .disable = omap2_clk_apll_disable, }; -/** - * omap2_table_mpu_recalc - just return the MPU speed - * @clk: virt_prcm_set struct clk - * - * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set. - */ -unsigned long omap2_table_mpu_recalc(struct clk *clk) -{ - return curr_prcm_set->mpu_speed; -} - -/* - * Look for a rate equal or less than the target rate given a configuration set. - * - * What's not entirely clear is "which" field represents the key field. - * Some might argue L3-DDR, others ARM, others IVA. This code is simple and - * just uses the ARM rates. - */ -long omap2_round_to_table_rate(struct clk *clk, unsigned long rate) -{ - const struct prcm_config *ptr; - long highest_rate; - long sys_ck_rate; - - sys_ck_rate = clk_get_rate(sclk); - - highest_rate = -EINVAL; - - for (ptr = rate_table; ptr->mpu_speed; ptr++) { - if (!(ptr->flags & cpu_mask)) - continue; - if (ptr->xtal_speed != sys_ck_rate) - continue; - - highest_rate = ptr->mpu_speed; - - /* Can check only after xtal frequency check */ - if (ptr->mpu_speed <= rate) - break; - } - return highest_rate; -} - -/* Sets basic clocks based on the specified rate */ -int omap2_select_table_rate(struct clk *clk, unsigned long rate) -{ - u32 cur_rate, done_rate, bypass = 0, tmp; - const struct prcm_config *prcm; - unsigned long found_speed = 0; - unsigned long flags; - long sys_ck_rate; - - sys_ck_rate = clk_get_rate(sclk); - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - - if (prcm->xtal_speed != sys_ck_rate) - continue; - - if (prcm->mpu_speed <= rate) { - found_speed = prcm->mpu_speed; - break; - } - } - - if (!found_speed) { - printk(KERN_INFO "Could not set MPU rate to %luMHz\n", - rate / 1000000); - return -EINVAL; - } - - curr_prcm_set = prcm; - cur_rate = omap2xxx_clk_get_core_rate(dclk); - - if (prcm->dpll_speed == cur_rate / 2) { - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); - } else if (prcm->dpll_speed == cur_rate * 2) { - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); - } else if (prcm->dpll_speed != cur_rate) { - local_irq_save(flags); - - if (prcm->dpll_speed == prcm->xtal_speed) - bypass = 1; - - if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) == - CORE_CLK_SRC_DPLL_X2) - done_rate = CORE_CLK_SRC_DPLL_X2; - else - done_rate = CORE_CLK_SRC_DPLL; - - /* MPU divider */ - cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL); - - /* dsp + iva1 div(2420), iva2.1(2430) */ - cm_write_mod_reg(prcm->cm_clksel_dsp, - OMAP24XX_DSP_MOD, CM_CLKSEL); - - cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL); - - /* Major subsystem dividers */ - tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK; - cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, - CM_CLKSEL1); - - if (cpu_is_omap2430()) - cm_write_mod_reg(prcm->cm_clksel_mdm, - OMAP2430_MDM_MOD, CM_CLKSEL); - - /* x2 to enter omap2xxx_sdrc_init_params() */ - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); - - omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr, - bypass); - - omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked()); - omap2xxx_sdrc_reprogram(done_rate, 0); - - local_irq_restore(flags); - } - - return 0; -} - -#ifdef CONFIG_CPU_FREQ -/* - * Walk PRCM rate table and fillout cpufreq freq_table - * XXX This should be replaced by an OPP layer in the near future - */ -static struct cpufreq_frequency_table *freq_table; - -void omap2xxx_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) -{ - const struct prcm_config *prcm; - long sys_ck_rate; - int i = 0; - int tbl_sz = 0; - - if (!cpu_is_omap2xxx()) - return; - - sys_ck_rate = clk_get_rate(sclk); - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sys_ck_rate) - continue; - - /* don't put bypass rates in table */ - if (prcm->dpll_speed == prcm->xtal_speed) - continue; - - tbl_sz++; - } - - /* - * XXX Ensure that we're doing what CPUFreq expects for this error - * case and the following one - */ - if (tbl_sz == 0) { - pr_warning("%s: no matching entries in rate_table\n", - __func__); - return; - } - - /* Include the CPUFREQ_TABLE_END terminator entry */ - tbl_sz++; - - freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz, - GFP_ATOMIC); - if (!freq_table) { - pr_err("%s: could not kzalloc frequency table\n", __func__); - return; - } - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sys_ck_rate) - continue; - - /* don't put bypass rates in table */ - if (prcm->dpll_speed == prcm->xtal_speed) - continue; - - freq_table[i].index = i; - freq_table[i].frequency = prcm->mpu_speed / 1000; - i++; - } - - freq_table[i].index = i; - freq_table[i].frequency = CPUFREQ_TABLE_END; - - *table = &freq_table[0]; -} - -void omap2xxx_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) -{ - if (!cpu_is_omap2xxx()) - return; - - kfree(freq_table); -} - -#endif - static u32 omap2_get_apll_clkin(void) { u32 aplls, srate = 0;