dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

Merge branch 'master'

This commit is contained in:
Jeff Garzik 2005-11-05 15:39:24 -05:00
parent f1e691a249 70d9d825e0
commit 7211bb9b64
3399 changed files with 226882 additions and 147463 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
CREDITS
View File

@ -2247,6 +2247,12 @@ S: 249 Nichols Avenue
S: Syracuse, New York 13206
S: USA
N: Kyle McMartin
E: kyle@parisc-linux.org
D: Linux/PARISC hacker
D: AD1889 sound driver
S: Ottawa, Canada
N: Dirk Melchers
E: dirk@merlin.nbg.sub.org
D: 8 bit XT hard disk driver for OMTI5520

2
Documentation/Changes
View File

@ -65,7 +65,7 @@ o isdn4k-utils 3.1pre1 # isdnctrl 2>&1|grep version
o nfs-utils 1.0.5 # showmount --version
o procps 3.2.0 # ps --version
o oprofile 0.9 # oprofiled --version
o udev 058 # udevinfo -V
o udev 071 # udevinfo -V
Kernel compilation
==================

10
Documentation/DocBook/kernel-api.tmpl
View File

@ -239,9 +239,9 @@ X!Ilib/string.c
<title>Network device support</title>
<sect1><title>Driver Support</title>
!Enet/core/dev.c
</sect1>
<sect1><title>8390 Based Network Cards</title>
!Edrivers/net/8390.c
!Enet/ethernet/eth.c
!Einclude/linux/etherdevice.h
!Enet/core/wireless.c
</sect1>
<sect1><title>Synchronous PPP</title>
!Edrivers/net/wan/syncppp.c
@ -286,7 +286,9 @@ X!Edrivers/pci/search.c
-->
!Edrivers/pci/msi.c
!Edrivers/pci/bus.c
!Edrivers/pci/hotplug.c
<!-- FIXME: Removed for now since no structured comments in source
X!Edrivers/pci/hotplug.c
-->
!Edrivers/pci/probe.c
!Edrivers/pci/rom.c
</sect1>

2
Documentation/DocBook/usb.tmpl
View File

@ -291,7 +291,7 @@
!Edrivers/usb/core/hcd.c
!Edrivers/usb/core/hcd-pci.c
!Edrivers/usb/core/buffer.c
!Idrivers/usb/core/buffer.c
</chapter>
<chapter>

3
Documentation/DocBook/writing_usb_driver.tmpl
View File

@ -345,8 +345,7 @@ if (!retval) {
<programlisting>
static inline void skel_delete (struct usb_skel *dev)
{
if (dev->bulk_in_buffer != NULL)
kfree (dev->bulk_in_buffer);
kfree (dev->bulk_in_buffer);
if (dev->bulk_out_buffer != NULL)
usb_buffer_free (dev->udev, dev->bulk_out_size,
dev->bulk_out_buffer,

122
Documentation/RCU/torture.txt Normal file
View File

@ -0,0 +1,122 @@
RCU Torture Test Operation
CONFIG_RCU_TORTURE_TEST
The CONFIG_RCU_TORTURE_TEST config option is available for all RCU
implementations. It creates an rcutorture kernel module that can
be loaded to run a torture test. The test periodically outputs
status messages via printk(), which can be examined via the dmesg
command (perhaps grepping for "rcutorture"). The test is started
when the module is loaded, and stops when the module is unloaded.
However, actually setting this config option to "y" results in the system
running the test immediately upon boot, and ending only when the system
is taken down. Normally, one will instead want to build the system
with CONFIG_RCU_TORTURE_TEST=m and to use modprobe and rmmod to control
the test, perhaps using a script similar to the one shown at the end of
this document. Note that you will need CONFIG_MODULE_UNLOAD in order
to be able to end the test.
MODULE PARAMETERS
This module has the following parameters:
nreaders This is the number of RCU reading threads supported.
The default is twice the number of CPUs. Why twice?
To properly exercise RCU implementations with preemptible
read-side critical sections.
stat_interval The number of seconds between output of torture
statistics (via printk()). Regardless of the interval,
statistics are printed when the module is unloaded.
Setting the interval to zero causes the statistics to
be printed -only- when the module is unloaded, and this
is the default.
verbose Enable debug printk()s. Default is disabled.
OUTPUT
The statistics output is as follows:
rcutorture: --- Start of test: nreaders=16 stat_interval=0 verbose=0
rcutorture: rtc: 0000000000000000 ver: 1916 tfle: 0 rta: 1916 rtaf: 0 rtf: 1915
rcutorture: Reader Pipe: 1466408 9747 0 0 0 0 0 0 0 0 0
rcutorture: Reader Batch: 1464477 11678 0 0 0 0 0 0 0 0
rcutorture: Free-Block Circulation: 1915 1915 1915 1915 1915 1915 1915 1915 1915 1915 0
rcutorture: --- End of test
The command "dmesg | grep rcutorture:" will extract this information on
most systems. On more esoteric configurations, it may be necessary to
use other commands to access the output of the printk()s used by
the RCU torture test. The printk()s use KERN_ALERT, so they should
be evident. ;-)
The entries are as follows:
o "ggp": The number of counter flips (or batches) since boot.
o "rtc": The hexadecimal address of the structure currently visible
to readers.
o "ver": The number of times since boot that the rcutw writer task
has changed the structure visible to readers.
o "tfle": If non-zero, indicates that the "torture freelist"
containing structure to be placed into the "rtc" area is empty.
This condition is important, since it can fool you into thinking
that RCU is working when it is not. :-/
o "rta": Number of structures allocated from the torture freelist.
o "rtaf": Number of allocations from the torture freelist that have
failed due to the list being empty.
o "rtf": Number of frees into the torture freelist.
o "Reader Pipe": Histogram of "ages" of structures seen by readers.
If any entries past the first two are non-zero, RCU is broken.
And rcutorture prints the error flag string "!!!" to make sure
you notice. The age of a newly allocated structure is zero,
it becomes one when removed from reader visibility, and is
incremented once per grace period subsequently -- and is freed
after passing through (RCU_TORTURE_PIPE_LEN-2) grace periods.
The output displayed above was taken from a correctly working
RCU. If you want to see what it looks like when broken, break
it yourself. ;-)
o "Reader Batch": Another histogram of "ages" of structures seen
by readers, but in terms of counter flips (or batches) rather
than in terms of grace periods. The legal number of non-zero
entries is again two. The reason for this separate view is
that it is easier to get the third entry to show up in the
"Reader Batch" list than in the "Reader Pipe" list.
o "Free-Block Circulation": Shows the number of torture structures
that have reached a given point in the pipeline. The first element
should closely correspond to the number of structures allocated,
the second to the number that have been removed from reader view,
and all but the last remaining to the corresponding number of
passes through a grace period. The last entry should be zero,
as it is only incremented if a torture structure's counter
somehow gets incremented farther than it should.
USAGE
The following script may be used to torture RCU:
#!/bin/sh
modprobe rcutorture
sleep 100
rmmod rcutorture
dmesg | grep rcutorture:
The output can be manually inspected for the error flag of "!!!".
One could of course create a more elaborate script that automatically
checked for such errors.

41
Documentation/arm/Samsung-S3C24XX/Overview.txt
View File

@ -81,7 +81,8 @@ Adding New Machines
Any large scale modifications, or new drivers should be discussed
on the ARM kernel mailing list (linux-arm-kernel) before being
attempted.
attempted. See http://www.arm.linux.org.uk/mailinglists/ for the
mailing list information.
NAND
@ -120,6 +121,43 @@ Clock Management
various clock units
Platform Data
-------------
Whenever a device has platform specific data that is specified
on a per-machine basis, care should be taken to ensure the
following:
1) that default data is not left in the device to confuse the
driver if a machine does not set it at startup
2) the data should (if possible) be marked as __initdata,
to ensure that the data is thrown away if the machine is
not the one currently in use.
The best way of doing this is to make a function that
kmalloc()s an area of memory, and copies the __initdata
and then sets the relevant device's platform data. Making
the function `__init` takes care of ensuring it is discarded
with the rest of the initialisation code
static __init void s3c24xx_xxx_set_platdata(struct xxx_data *pd)
{
struct s3c2410_xxx_mach_info *npd;
npd = kmalloc(sizeof(struct s3c2410_xxx_mach_info), GFP_KERNEL);
if (npd) {
memcpy(npd, pd, sizeof(struct s3c2410_xxx_mach_info));
s3c_device_xxx.dev.platform_data = npd;
} else {
printk(KERN_ERR "no memory for xxx platform data\n");
}
}
Note, since the code is marked as __init, it should not be
exported outside arch/arm/mach-s3c2410/, or exported to
modules via EXPORT_SYMBOL() and related functions.
Port Contributors
-----------------
@ -149,6 +187,7 @@ Document Changes
06 Mar 2005 - BJD - Added Christer Weinigel
08 Mar 2005 - BJD - Added LCVR to list of people, updated introduction
08 Mar 2005 - BJD - Added section on adding machines
09 Sep 2005 - BJD - Added section on platform data
Document Author
---------------

9
Documentation/cachetlb.txt
View File

@ -49,9 +49,6 @@ changes occur:
page table operations such as what happens during
fork, and exec.
Platform developers note that generic code will always
invoke this interface without mm->page_table_lock held.
3) void flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
@ -72,9 +69,6 @@ changes occur:
call flush_tlb_page (see below) for each entry which may be
modified.
Platform developers note that generic code will always
invoke this interface with mm->page_table_lock held.
4) void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
This time we need to remove the PAGE_SIZE sized translation
@ -93,9 +87,6 @@ changes occur:
This is used primarily during fault processing.
Platform developers note that generic code will always
invoke this interface with mm->page_table_lock held.
5) void flush_tlb_pgtables(struct mm_struct *mm,
unsigned long start, unsigned long end)

2
Documentation/cpusets.txt
View File

@ -94,7 +94,7 @@ the available CPU and Memory resources amongst the requesting tasks.
But larger systems, which benefit more from careful processor and
memory placement to reduce memory access times and contention,
and which typically represent a larger investment for the customer,
can benefit from explictly placing jobs on properly sized subsets of
can benefit from explicitly placing jobs on properly sized subsets of
the system.
This can be especially valuable on:

68
Documentation/driver-model/driver.txt
View File

@ -14,8 +14,8 @@ struct device_driver {
int (*probe) (struct device * dev);
int (*remove) (struct device * dev);
int (*suspend) (struct device * dev, pm_message_t state, u32 level);
int (*resume) (struct device * dev, u32 level);
int (*suspend) (struct device * dev, pm_message_t state);
int (*resume) (struct device * dev);
};
@ -194,69 +194,13 @@ device; i.e. anything in the device's driver_data field.
If the device is still present, it should quiesce the device and place
it into a supported low-power state.
int (*suspend) (struct device * dev, pm_message_t state, u32 level);
int (*suspend) (struct device * dev, pm_message_t state);
suspend is called to put the device in a low power state. There are
several stages to successfully suspending a device, which is denoted in
the @level parameter. Breaking the suspend transition into several
stages affords the platform flexibility in performing device power
management based on the requirements of the system and the
user-defined policy.
suspend is called to put the device in a low power state.
SUSPEND_NOTIFY notifies the device that a suspend transition is about
to happen. This happens on system power state transitions to verify
that all devices can successfully suspend.
int (*resume) (struct device * dev);
A driver may choose to fail on this call, which should cause the
entire suspend transition to fail. A driver should fail only if it
knows that the device will not be able to be resumed properly when the
system wakes up again. It could also fail if it somehow determines it
is in the middle of an operation too important to stop.
SUSPEND_DISABLE tells the device to stop I/O transactions. When it
stops transactions, or what it should do with unfinished transactions
is a policy of the driver. After this call, the driver should not
accept any other I/O requests.
SUSPEND_SAVE_STATE tells the device to save the context of the
hardware. This includes any bus-specific hardware state and
device-specific hardware state. A pointer to this saved state can be
stored in the device's saved_state field.
SUSPEND_POWER_DOWN tells the driver to place the device in the low
power state requested.
Whether suspend is called with a given level is a policy of the
platform. Some levels may be omitted; drivers must not assume the
reception of any level. However, all levels must be called in the
order above; i.e. notification will always come before disabling;
disabling the device will come before suspending the device.
All calls are made with interrupts enabled, except for the
SUSPEND_POWER_DOWN level.
int (*resume) (struct device * dev, u32 level);
Resume is used to bring a device back from a low power state. Like the
suspend transition, it happens in several stages.
RESUME_POWER_ON tells the driver to set the power state to the state
before the suspend call (The device could have already been in a low
power state before the suspend call to put in a lower power state).
RESUME_RESTORE_STATE tells the driver to restore the state saved by
the SUSPEND_SAVE_STATE suspend call.
RESUME_ENABLE tells the driver to start accepting I/O transactions
again. Depending on driver policy, the device may already have pending
I/O requests.
RESUME_POWER_ON is called with interrupts disabled. The other resume
levels are called with interrupts enabled.
As with the various suspend stages, the driver must not assume that
any other resume calls have been or will be made. Each call should be
self-contained and not dependent on any external state.
Resume is used to bring a device back from a low power state.
Attributes

2
Documentation/driver-model/porting.txt
View File

@ -350,7 +350,7 @@ When a driver is registered, the bus's list of devices is iterated
over. bus->match() is called for each device that is not already
claimed by a driver.
When a device is successfully bound to a device, device->driver is
When a device is successfully bound to a driver, device->driver is
set, the device is added to a per-driver list of devices, and a
symlink is created in the driver's sysfs directory that points to the
device's physical directory:

42
Documentation/filesystems/ntfs.txt
View File

@ -50,9 +50,14 @@ userspace utilities, etc.
Features
========
- This is a complete rewrite of the NTFS driver that used to be in the kernel.
This new driver implements NTFS read support and is functionally equivalent
to the old ntfs driver.
- This is a complete rewrite of the NTFS driver that used to be in the 2.4 and
earlier kernels. This new driver implements NTFS read support and is
functionally equivalent to the old ntfs driver and it also implements limited
write support. The biggest limitation at present is that files/directories
cannot be created or deleted. See below for the list of write features that
are so far supported. Another limitation is that writing to compressed files
is not implemented at all. Also, neither read nor write access to encrypted
files is so far implemented.
- The new driver has full support for sparse files on NTFS 3.x volumes which
the old driver isn't happy with.
- The new driver supports execution of binaries due to mmap() now being
@ -78,7 +83,20 @@ Features
- The new driver supports fsync(2), fdatasync(2), and msync(2).
- The new driver supports readv(2) and writev(2).
- The new driver supports access time updates (including mtime and ctime).
- The new driver supports truncate(2) and open(2) with O_TRUNC. But at present
only very limited support for highly fragmented files, i.e. ones which have
their data attribute split across multiple extents, is included. Another
limitation is that at present truncate(2) will never create sparse files,
since to mark a file sparse we need to modify the directory entry for the
file and we do not implement directory modifications yet.
- The new driver supports write(2) which can both overwrite existing data and
extend the file size so that you can write beyond the existing data. Also,
writing into sparse regions is supported and the holes are filled in with
clusters. But at present only limited support for highly fragmented files,
i.e. ones which have their data attribute split across multiple extents, is
included. Another limitation is that write(2) will never create sparse
files, since to mark a file sparse we need to modify the directory entry for
the file and we do not implement directory modifications yet.
Supported mount options
=======================
@ -439,6 +457,22 @@ ChangeLog
Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog.
2.1.25:
- Write support is now extended with write(2) being able to both
overwrite existing file data and to extend files. Also, if a write
to a sparse region occurs, write(2) will fill in the hole. Note,
mmap(2) based writes still do not support writing into holes or
writing beyond the initialized size.
- Write support has a new feature and that is that truncate(2) and
open(2) with O_TRUNC are now implemented thus files can be both made
smaller and larger.
- Note: Both write(2) and truncate(2)/open(2) with O_TRUNC still have
limitations in that they
- only provide limited support for highly fragmented files.
- only work on regular, i.e. uncompressed and unencrypted files.
- never create sparse files although this will change once directory
operations are implemented.
- Lots of bug fixes and enhancements across the board.
2.1.24:
- Support journals ($LogFile) which have been modified by chkdsk. This
means users can boot into Windows after we marked the volume dirty.

142
Documentation/filesystems/xfs.txt
View File

@ -19,15 +19,43 @@ Mount Options
When mounting an XFS filesystem, the following options are accepted.
biosize=size
Sets the preferred buffered I/O size (default size is 64K).
"size" must be expressed as the logarithm (base2) of the
desired I/O size.
Valid values for this option are 14 through 16, inclusive
(i.e. 16K, 32K, and 64K bytes). On machines with a 4K
pagesize, 13 (8K bytes) is also a valid size.
The preferred buffered I/O size can also be altered on an
individual file basis using the ioctl(2) system call.
allocsize=size
Sets the buffered I/O end-of-file preallocation size when
doing delayed allocation writeout (default size is 64KiB).
Valid values for this option are page size (typically 4KiB)
through to 1GiB, inclusive, in power-of-2 increments.
attr2/noattr2
The options enable/disable (default is disabled for backward
compatibility on-disk) an "opportunistic" improvement to be
made in the way inline extended attributes are stored on-disk.
When the new form is used for the first time (by setting or
removing extended attributes) the on-disk superblock feature
bit field will be updated to reflect this format being in use.
barrier
Enables the use of block layer write barriers for writes into
the journal and unwritten extent conversion. This allows for
drive level write caching to be enabled, for devices that
support write barriers.
dmapi
Enable the DMAPI (Data Management API) event callouts.
Use with the "mtpt" option.
grpid/bsdgroups and nogrpid/sysvgroups
These options define what group ID a newly created file gets.
When grpid is set, it takes the group ID of the directory in
which it is created; otherwise (the default) it takes the fsgid
of the current process, unless the directory has the setgid bit
set, in which case it takes the gid from the parent directory,
and also gets the setgid bit set if it is a directory itself.
ihashsize=value
Sets the number of hash buckets available for hashing the
in-memory inodes of the specified mount point. If a value
of zero is used, the value selected by the default algorithm
will be displayed in /proc/mounts.
ikeep/noikeep
When inode clusters are emptied of inodes, keep them around
@ -35,12 +63,31 @@ When mounting an XFS filesystem, the following options are accepted.
and is still the default for now. Using the noikeep option,
inode clusters are returned to the free space pool.
inode64
Indicates that XFS is allowed to create inodes at any location
in the filesystem, including those which will result in inode
numbers occupying more than 32 bits of significance. This is
provided for backwards compatibility, but causes problems for
backup applications that cannot handle large inode numbers.
largeio/nolargeio
If "nolargeio" is specified, the optimal I/O reported in
st_blksize by stat(2) will be as small as possible to allow user
applications to avoid inefficient read/modify/write I/O.
If "largeio" specified, a filesystem that has a "swidth" specified
will return the "swidth" value (in bytes) in st_blksize. If the
filesystem does not have a "swidth" specified but does specify
an "allocsize" then "allocsize" (in bytes) will be returned
instead.
If neither of these two options are specified, then filesystem
will behave as if "nolargeio" was specified.
logbufs=value
Set the number of in-memory log buffers. Valid numbers range
from 2-8 inclusive.
The default value is 8 buffers for filesystems with a
blocksize of 64K, 4 buffers for filesystems with a blocksize
of 32K, 3 buffers for filesystems with a blocksize of 16K
blocksize of 64KiB, 4 buffers for filesystems with a blocksize
of 32KiB, 3 buffers for filesystems with a blocksize of 16KiB
and 2 buffers for all other configurations. Increasing the
number of buffers may increase performance on some workloads
at the cost of the memory used for the additional log buffers
@ -49,10 +96,10 @@ When mounting an XFS filesystem, the following options are accepted.
logbsize=value
Set the size of each in-memory log buffer.
Size may be specified in bytes, or in kilobytes with a "k" suffix.
Valid sizes for version 1 and version 2 logs are 16384 (16k) and
32768 (32k). Valid sizes for version 2 logs also include
Valid sizes for version 1 and version 2 logs are 16384 (16k) and
32768 (32k). Valid sizes for version 2 logs also include
65536 (64k), 131072 (128k) and 262144 (256k).
The default value for machines with more than 32MB of memory
The default value for machines with more than 32MiB of memory
is 32768, machines with less memory use 16384 by default.
logdev=device and rtdev=device
@ -62,6 +109,11 @@ When mounting an XFS filesystem, the following options are accepted.
optional, and the log section can be separate from the data
section or contained within it.
mtpt=mountpoint
Use with the "dmapi" option. The value specified here will be
included in the DMAPI mount event, and should be the path of
the actual mountpoint that is used.
noalign
Data allocations will not be aligned at stripe unit boundaries.
@ -91,13 +143,17 @@ When mounting an XFS filesystem, the following options are accepted.
O_SYNC writes can be lost if the system crashes.
If timestamp updates are critical, use the osyncisosync option.
quota/usrquota/uqnoenforce
uquota/usrquota/uqnoenforce/quota
User disk quota accounting enabled, and limits (optionally)
enforced.
enforced. Refer to xfs_quota(8) for further details.
grpquota/gqnoenforce
gquota/grpquota/gqnoenforce
Group disk quota accounting enabled and limits (optionally)
enforced.
enforced. Refer to xfs_quota(8) for further details.
pquota/prjquota/pqnoenforce
Project disk quota accounting enabled and limits (optionally)
enforced. Refer to xfs_quota(8) for further details.
sunit=value and swidth=value
Used to specify the stripe unit and width for a RAID device or
@ -113,15 +169,21 @@ When mounting an XFS filesystem, the following options are accepted.
The "swidth" option is required if the "sunit" option has been
specified, and must be a multiple of the "sunit" value.
swalloc
Data allocations will be rounded up to stripe width boundaries
when the current end of file is being extended and the file
size is larger than the stripe width size.
sysctls
=======
The following sysctls are available for the XFS filesystem:
fs.xfs.stats_clear (Min: 0 Default: 0 Max: 1)
Setting this to "1" clears accumulated XFS statistics
Setting this to "1" clears accumulated XFS statistics
in /proc/fs/xfs/stat. It then immediately resets to "0".
fs.xfs.xfssyncd_centisecs (Min: 100 Default: 3000 Max: 720000)
The interval at which the xfssyncd thread flushes metadata
out to disk. This thread will flush log activity out, and
@ -143,9 +205,9 @@ The following sysctls are available for the XFS filesystem:
XFS_ERRLEVEL_HIGH: 5
fs.xfs.panic_mask (Min: 0 Default: 0 Max: 127)
Causes certain error conditions to call BUG(). Value is a bitmask;
Causes certain error conditions to call BUG(). Value is a bitmask;
AND together the tags which represent errors which should cause panics:
XFS_NO_PTAG 0
XFS_PTAG_IFLUSH 0x00000001
XFS_PTAG_LOGRES 0x00000002
@ -155,7 +217,7 @@ The following sysctls are available for the XFS filesystem:
XFS_PTAG_SHUTDOWN_IOERROR 0x00000020
XFS_PTAG_SHUTDOWN_LOGERROR 0x00000040
This option is intended for debugging only.
This option is intended for debugging only.
fs.xfs.irix_symlink_mode (Min: 0 Default: 0 Max: 1)
Controls whether symlinks are created with mode 0777 (default)
@ -164,25 +226,37 @@ The following sysctls are available for the XFS filesystem:
fs.xfs.irix_sgid_inherit (Min: 0 Default: 0 Max: 1)
Controls files created in SGID directories.
If the group ID of the new file does not match the effective group
ID or one of the supplementary group IDs of the parent dir, the
ISGID bit is cleared if the irix_sgid_inherit compatibility sysctl
ID or one of the supplementary group IDs of the parent dir, the
ISGID bit is cleared if the irix_sgid_inherit compatibility sysctl
is set.
fs.xfs.restrict_chown (Min: 0 Default: 1 Max: 1)
Controls whether unprivileged users can use chown to "give away"
a file to another user.
fs.xfs.inherit_sync (Min: 0 Default: 1 Max 1)
Setting this to "1" will cause the "sync" flag set
by the chattr(1) command on a directory to be
fs.xfs.inherit_sync (Min: 0 Default: 1 Max: 1)
Setting this to "1" will cause the "sync" flag set
by the xfs_io(8) chattr command on a directory to be
inherited by files in that directory.
fs.xfs.inherit_nodump (Min: 0 Default: 1 Max 1)
Setting this to "1" will cause the "nodump" flag set
by the chattr(1) command on a directory to be
fs.xfs.inherit_nodump (Min: 0 Default: 1 Max: 1)
Setting this to "1" will cause the "nodump" flag set
by the xfs_io(8) chattr command on a directory to be
inherited by files in that directory.
fs.xfs.inherit_noatime (Min: 0 Default: 1 Max 1)
Setting this to "1" will cause the "noatime" flag set
by the chattr(1) command on a directory to be
fs.xfs.inherit_noatime (Min: 0 Default: 1 Max: 1)
Setting this to "1" will cause the "noatime" flag set
by the xfs_io(8) chattr command on a directory to be
inherited by files in that directory.
fs.xfs.inherit_nosymlinks (Min: 0 Default: 1 Max: 1)
Setting this to "1" will cause the "nosymlinks" flag set
by the xfs_io(8) chattr command on a directory to be
inherited by files in that directory.
fs.xfs.rotorstep (Min: 1 Default: 1 Max: 256)
In "inode32" allocation mode, this option determines how many
files the allocator attempts to allocate in the same allocation
group before moving to the next allocation group. The intent
is to control the rate at which the allocator moves between
allocation groups when allocating extents for new files.

1
Documentation/firmware_class/firmware_sample_driver.c
View File

@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/string.h>
#include "linux/firmware.h"

2
Documentation/firmware_class/firmware_sample_firmware_class.c
View File

@ -14,6 +14,8 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/timer.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/firmware.h>

8
Documentation/hwmon/it87
View File

@ -4,18 +4,18 @@ Kernel driver it87
Supported chips:
* IT8705F
Prefix: 'it87'
Addresses scanned: from Super I/O config space, or default ISA 0x290 (8 I/O ports)
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Publicly available at the ITE website
http://www.ite.com.tw/
* IT8712F
Prefix: 'it8712'
Addresses scanned: I2C 0x28 - 0x2f
from Super I/O config space, or default ISA 0x290 (8 I/O ports)
from Super I/O config space (8 I/O ports)
Datasheet: Publicly available at the ITE website
http://www.ite.com.tw/
* SiS950 [clone of IT8705F]
Prefix: 'sis950'
Addresses scanned: from Super I/O config space, or default ISA 0x290 (8 I/O ports)
Prefix: 'it87'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: No longer be available
Author: Christophe Gauthron <chrisg@0-in.com>

47
Documentation/hwmon/lm90
View File

@ -24,14 +24,14 @@ Supported chips:
http://www.national.com/pf/LM/LM86.html
* Analog Devices ADM1032
Prefix: 'adm1032'
Addresses scanned: I2C 0x4c
Addresses scanned: I2C 0x4c and 0x4d
Datasheet: Publicly available at the Analog Devices website
http://products.analog.com/products/info.asp?product=ADM1032
http://www.analog.com/en/prod/0,2877,ADM1032,00.html
* Analog Devices ADT7461
Prefix: 'adt7461'
Addresses scanned: I2C 0x4c
Addresses scanned: I2C 0x4c and 0x4d
Datasheet: Publicly available at the Analog Devices website
http://products.analog.com/products/info.asp?product=ADT7461
http://www.analog.com/en/prod/0,2877,ADT7461,00.html
Note: Only if in ADM1032 compatibility mode
* Maxim MAX6657
Prefix: 'max6657'
@ -71,8 +71,8 @@ increased resolution of the remote temperature measurement.
The different chipsets of the family are not strictly identical, although
very similar. This driver doesn't handle any specific feature for now,
but could if there ever was a need for it. For reference, here comes a
non-exhaustive list of specific features:
with the exception of SMBus PEC. For reference, here comes a non-exhaustive
list of specific features:
LM90:
* Filter and alert configuration register at 0xBF.
@ -91,6 +91,7 @@ ADM1032:
* Conversion averaging.
* Up to 64 conversions/s.
* ALERT is triggered by open remote sensor.
* SMBus PEC support for Write Byte and Receive Byte transactions.
ADT7461
* Extended temperature range (breaks compatibility)
@ -119,3 +120,37 @@ The lm90 driver will not update its values more frequently than every
other second; reading them more often will do no harm, but will return
'old' values.
PEC Support
-----------
The ADM1032 is the only chip of the family which supports PEC. It does
not support PEC on all transactions though, so some care must be taken.
When reading a register value, the PEC byte is computed and sent by the
ADM1032 chip. However, in the case of a combined transaction (SMBus Read
Byte), the ADM1032 computes the CRC value over only the second half of
the message rather than its entirety, because it thinks the first half
of the message belongs to a different transaction. As a result, the CRC
value differs from what the SMBus master expects, and all reads fail.
For this reason, the lm90 driver will enable PEC for the ADM1032 only if
the bus supports the SMBus Send Byte and Receive Byte transaction types.
These transactions will be used to read register values, instead of
SMBus Read Byte, and PEC will work properly.
Additionally, the ADM1032 doesn't support SMBus Send Byte with PEC.
Instead, it will try to write the PEC value to the register (because the
SMBus Send Byte transaction with PEC is similar to a Write Byte transaction
without PEC), which is not what we want. Thus, PEC is explicitely disabled
on SMBus Send Byte transactions in the lm90 driver.
PEC on byte data transactions represents a significant increase in bandwidth
usage (+33% for writes, +25% for reads) in normal conditions. With the need
to use two SMBus transaction for reads, this overhead jumps to +50%. Worse,
two transactions will typically mean twice as much delay waiting for
transaction completion, effectively doubling the register cache refresh time.
I guess reliability comes at a price, but it's quite expensive this time.
So, as not everyone might enjoy the slowdown, PEC can be disabled through
sysfs. Just write 0 to the "pec" file and PEC will be disabled. Write 1
to that file to enable PEC again.

8
Documentation/hwmon/smsc47b397
View File

@ -3,6 +3,7 @@ Kernel driver smsc47b397
Supported chips:
* SMSC LPC47B397-NC
* SMSC SCH5307-NS
Prefix: 'smsc47b397'
Addresses scanned: none, address read from Super I/O config space
Datasheet: In this file
@ -12,11 +13,14 @@ Authors: Mark M. Hoffman <mhoffman@lightlink.com>
November 23, 2004
The following specification describes the SMSC LPC47B397-NC sensor chip
The following specification describes the SMSC LPC47B397-NC[1] sensor chip
(for which there is no public datasheet available). This document was
provided by Craig Kelly (In-Store Broadcast Network) and edited/corrected
by Mark M. Hoffman <mhoffman@lightlink.com>.
[1] And SMSC SCH5307-NS, which has a different device ID but is otherwise
compatible.
* * * * *
Methods for detecting the HP SIO and reading the thermal data on a dc7100.
@ -127,7 +131,7 @@ OUT DX,AL
The registers of interest for identifying the SIO on the dc7100 are Device ID
(0x20) and Device Rev (0x21).
The Device ID will read 0X6F
The Device ID will read 0x6F (for SCH5307-NS, 0x81)
The Device Rev currently reads 0x01
Obtaining the HWM Base Address.

7
Documentation/hwmon/smsc47m1
View File

@ -12,6 +12,10 @@ Supported chips:
http://www.smsc.com/main/datasheets/47m14x.pdf
http://www.smsc.com/main/tools/discontinued/47m15x.pdf
http://www.smsc.com/main/datasheets/47m192.pdf
* SMSC LPC47M997
Addresses scanned: none, address read from Super I/O config space
Prefix: 'smsc47m1'
Datasheet: none
Authors:
Mark D. Studebaker <mdsxyz123@yahoo.com>,
@ -30,6 +34,9 @@ The 47M15x and 47M192 chips contain a full 'hardware monitoring block'
in addition to the fan monitoring and control. The hardware monitoring
block is not supported by the driver.
No documentation is available for the 47M997, but it has the same device
ID as the 47M15x and 47M192 chips and seems to be compatible.
Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
triggered if the rotation speed has dropped below a programmable limit. Fan
readings can be divided by a programmable divider (1, 2, 4 or 8) to give

3
Documentation/hwmon/sysfs-interface
View File

@ -272,3 +272,6 @@ beep_mask Bitmask for beep.
eeprom Raw EEPROM data in binary form.
Read only.
pec Enable or disable PEC (SMBus only)
Read/Write

17
Documentation/hwmon/via686a
View File

@ -18,8 +18,9 @@ Authors:
Module Parameters
-----------------
force_addr=0xaddr Set the I/O base address. Useful for Asus A7V boards
that don't set the address in the BIOS. Does not do a
force_addr=0xaddr Set the I/O base address. Useful for boards that
don't set the address in the BIOS. Look for a BIOS
upgrade before resorting to this. Does not do a
PCI force; the via686a must still be present in lspci.
Don't use this unless the driver complains that the
base address is not set.
@ -63,3 +64,15 @@ miss once-only alarms.
The driver only updates its values each 1.5 seconds; reading it more often
will do no harm, but will return 'old' values.
Known Issues
------------
This driver handles sensors integrated in some VIA south bridges. It is
possible that a motherboard maker used a VT82C686A/B chip as part of a
product design but was not interested in its hardware monitoring features,
in which case the sensor inputs will not be wired. This is the case of
the Asus K7V, A7V and A7V133 motherboards, to name only a few of them.
So, if you need the force_addr parameter, and end up with values which
don't seem to make any sense, don't look any further: your chip is simply
not wired for hardware monitoring.

1
Documentation/i2c/busses/i2c-i810
View File

@ -2,6 +2,7 @@ Kernel driver i2c-i810
Supported adapters:
* Intel 82810, 82810-DC100, 82810E, and 82815 (GMCH)
* Intel 82845G (GMCH)
Authors:
Frodo Looijaard <frodol@dds.nl>,

27
Documentation/i2c/busses/i2c-viapro
View File

@ -4,17 +4,18 @@ Supported adapters:
* VIA Technologies, Inc. VT82C596A/B
Datasheet: Sometimes available at the VIA website
* VIA Technologies, Inc. VT82C686A/B
* VIA Technologies, Inc. VT82C686A/B
Datasheet: Sometimes available at the VIA website
* VIA Technologies, Inc. VT8231, VT8233, VT8233A, VT8235, VT8237
Datasheet: available on request from Via
Authors:
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Kyösti Mälkki <kmalkki@cc.hut.fi>,
Mark D. Studebaker <mdsxyz123@yahoo.com>
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Kyösti Mälkki <kmalkki@cc.hut.fi>,
Mark D. Studebaker <mdsxyz123@yahoo.com>,
Jean Delvare <khali@linux-fr.org>
Module Parameters
-----------------
@ -28,20 +29,22 @@ Description
-----------
i2c-viapro is a true SMBus host driver for motherboards with one of the
supported VIA southbridges.
supported VIA south bridges.
Your lspci -n listing must show one of these :
device 1106:3050 (VT82C596 function 3)
device 1106:3051 (VT82C596 function 3)
device 1106:3050 (VT82C596A function 3)
device 1106:3051 (VT82C596B function 3)
device 1106:3057 (VT82C686 function 4)
device 1106:3074 (VT8233)
device 1106:3147 (VT8233A)
device 1106:8235 (VT8231)
devide 1106:3177 (VT8235)
devide 1106:3227 (VT8237)
device 1106:8235 (VT8231 function 4)
device 1106:3177 (VT8235)
device 1106:3227 (VT8237R)
If none of these show up, you should look in the BIOS for settings like
enable ACPI / SMBus or even USB.
Except for the oldest chips (VT82C596A/B, VT82C686A and most probably
VT8231), this driver supports I2C block transactions. Such transactions
are mainly useful to read from and write to EEPROMs.

38
Documentation/i2c/chips/x1205 Normal file
View File

@ -0,0 +1,38 @@
Kernel driver x1205
===================
Supported chips:
* Xicor X1205 RTC
Prefix: 'x1205'
Addresses scanned: none
Datasheet: http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html
Authors:
Karen Spearel <kas11@tampabay.rr.com>,
Alessandro Zummo <a.zummo@towertech.it>
Description
-----------
This module aims to provide complete access to the Xicor X1205 RTC.
Recently Xicor has merged with Intersil, but the chip is
still sold under the Xicor brand.
This chip is located at address 0x6f and uses a 2-byte register addressing.
Two bytes need to be written to read a single register, while most
other chips just require one and take the second one as the data
to be written. To prevent corrupting unknown chips, the user must
explicitely set the probe parameter.
example:
modprobe x1205 probe=0,0x6f
The module supports one more option, hctosys, which is used to set the
software clock from the x1205. On systems where the x1205 is the
only hardware rtc, this parameter could be used to achieve a correct
date/time earlier in the system boot sequence.
example:
modprobe x1205 probe=0,0x6f hctosys=1

7
Documentation/i2c/functionality
View File

@ -17,9 +17,10 @@ For the most up-to-date list of functionality constants, please check
I2C_FUNC_I2C Plain i2c-level commands (Pure SMBus
adapters typically can not do these)
I2C_FUNC_10BIT_ADDR Handles the 10-bit address extensions
I2C_FUNC_PROTOCOL_MANGLING Knows about the I2C_M_REV_DIR_ADDR,
I2C_M_REV_DIR_ADDR and I2C_M_REV_DIR_NOSTART
flags (which modify the i2c protocol!)
I2C_FUNC_PROTOCOL_MANGLING Knows about the I2C_M_IGNORE_NAK,
I2C_M_REV_DIR_ADDR, I2C_M_NOSTART and
I2C_M_NO_RD_ACK flags (which modify the
I2C protocol!)
I2C_FUNC_SMBUS_QUICK Handles the SMBus write_quick command
I2C_FUNC_SMBUS_READ_BYTE Handles the SMBus read_byte command
I2C_FUNC_SMBUS_WRITE_BYTE Handles the SMBus write_byte command

2
Documentation/i2c/porting-clients
View File

@ -82,7 +82,7 @@ Technical changes:
exit and exit_free. For i2c+isa drivers, labels should be named
ERROR0, ERROR1 and ERROR2. Don't forget to properly set err before
jumping to error labels. By the way, labels should be left-aligned.
Use memset to fill the client and data area with 0x00.
Use kzalloc instead of kmalloc.
Use i2c_set_clientdata to set the client data (as opposed to
a direct access to client->data).
Use strlcpy instead of strcpy to copy the client name.

28
Documentation/i2c/writing-clients
View File

@ -33,8 +33,8 @@ static struct i2c_driver foo_driver = {
.command = &foo_command /* may be NULL */
}
The name can be chosen freely, and may be upto 40 characters long. Please
use something descriptive here.
The name field must match the driver name, including the case. It must not
contain spaces, and may be up to 31 characters long.
Don't worry about the flags field; just put I2C_DF_NOTIFY into it. This
means that your driver will be notified when new adapters are found.
@ -43,9 +43,6 @@ This is almost always what you want.
All other fields are for call-back functions which will be explained
below.
There use to be two additional fields in this structure, inc_use et dec_use,
for module usage count, but these fields were obsoleted and removed.
Extra client data
=================
@ -58,6 +55,7 @@ be very useful.
An example structure is below.
struct foo_data {
struct i2c_client client;
struct semaphore lock; /* For ISA access in `sensors' drivers. */
int sysctl_id; /* To keep the /proc directory entry for
`sensors' drivers. */
@ -275,6 +273,7 @@ For now, you can ignore the `flags' parameter. It is there for future use.
if (is_isa) {
/* Discard immediately if this ISA range is already used */
/* FIXME: never use check_region(), only request_region() */
if (check_region(address,FOO_EXTENT))
goto ERROR0;
@ -310,22 +309,15 @@ For now, you can ignore the `flags' parameter. It is there for future use.
client structure, even though we cannot fill it completely yet.
But it allows us to access several i2c functions safely */
/* Note that we reserve some space for foo_data too. If you don't
need it, remove it. We do it here to help to lessen memory
fragmentation. */
if (! (new_client = kmalloc(sizeof(struct i2c_client) +
sizeof(struct foo_data),
GFP_KERNEL))) {
if (!(data = kzalloc(sizeof(struct foo_data), GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR0;
}
/* This is tricky, but it will set the data to the right value. */
client->data = new_client + 1;
data = (struct foo_data *) (client->data);
new_client = &data->client;
i2c_set_clientdata(new_client, data);
new_client->addr = address;
new_client->data = data;
new_client->adapter = adapter;
new_client->driver = &foo_driver;
new_client->flags = 0;
@ -451,7 +443,7 @@ much simpler than the attachment code, fortunately!
release_region(client->addr,LM78_EXTENT);
/* HYBRID SENSORS CHIP ONLY END */
kfree(client); /* Frees client data too, if allocated at the same time */
kfree(data);
return 0;
}
@ -576,12 +568,12 @@ SMBus communication
extern s32 i2c_smbus_write_block_data(struct i2c_client * client,
u8 command, u8 length,
u8 *values);
extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
u8 command, u8 *values);
These ones were removed in Linux 2.6.10 because they had no users, but could
be added back later if needed:
extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
u8 command, u8 *values);
extern s32 i2c_smbus_read_block_data(struct i2c_client * client,
u8 command, u8 *values);
extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client,

19
Documentation/input/yealink.txt
View File

@ -2,7 +2,6 @@ Driver documentation for yealink usb-p1k phones
0. Status
~~~~~~~~~
The p1k is a relatively cheap usb 1.1 phone with:
- keyboard full support, yealink.ko / input event API
- LCD full support, yealink.ko / sysfs API
@ -17,9 +16,8 @@ For vendor documentation see http://www.yealink.com
1. Compilation (stand alone version)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Currently only kernel 2.6.x.y versions are supported.
In order to build the yealink.ko module do:
In order to build the yealink.ko module do
make
@ -28,6 +26,21 @@ the Makefile is pointing to the location where your kernel sources
are located, default /usr/src/linux.
1.1 Troubleshooting
~~~~~~~~~~~~~~~~~~~
Q: Module yealink compiled and installed without any problem but phone
is not initialized and does not react to any actions.
A: If you see something like:
hiddev0: USB HID v1.00 Device [Yealink Network Technology Ltd. VOIP USB Phone
in dmesg, it means that the hid driver has grabbed the device first. Try to
load module yealink before any other usb hid driver. Please see the
instructions provided by your distribution on module configuration.
Q: Phone is working now (displays version and accepts keypad input) but I can't
find the sysfs files.
A: The sysfs files are located on the particular usb endpoint. On most
distributions you can do: "find /sys/ -name get_icons" for a hint.
2. keyboard features
~~~~~~~~~~~~~~~~~~~~

4
Documentation/kernel-parameters.txt
View File

@ -1460,8 +1460,6 @@ running once the system is up.
stifb= [HW]
Format: bpp:<bpp1>[:<bpp2>[:<bpp3>...]]
stram_swap= [HW,M68k]
swiotlb= [IA-64] Number of I/O TLB slabs
switches= [HW,M68k]
@ -1517,8 +1515,6 @@ running once the system is up.
uart6850= [HW,OSS]
Format: <io>,<irq>
usb-handoff [HW] Enable early USB BIOS -> OS handoff
usbhid.mousepoll=
[USBHID] The interval which mice are to be polled at.

22
Documentation/keys.txt
View File

@ -196,7 +196,7 @@ KEY ACCESS PERMISSIONS
Keys have an owner user ID, a group access ID, and a permissions mask. The mask
has up to eight bits each for possessor, user, group and other access. Only
five of each set of eight bits are defined. These permissions granted are:
six of each set of eight bits are defined. These permissions granted are:
(*) View
@ -224,6 +224,10 @@ five of each set of eight bits are defined. These permissions granted are:
keyring to a key, a process must have Write permission on the keyring and
Link permission on the key.
(*) Set Attribute
This permits a key's UID, GID and permissions mask to be changed.
For changing the ownership, group ID or permissions mask, being the owner of
the key or having the sysadmin capability is sufficient.
@ -242,15 +246,15 @@ about the status of the key service:
this way:
SERIAL FLAGS USAGE EXPY PERM UID GID TYPE DESCRIPTION: SUMMARY
00000001 I----- 39 perm 1f1f0000 0 0 keyring _uid_ses.0: 1/4
00000002 I----- 2 perm 1f1f0000 0 0 keyring _uid.0: empty
00000007 I----- 1 perm 1f1f0000 0 0 keyring _pid.1: empty
0000018d I----- 1 perm 1f1f0000 0 0 keyring _pid.412: empty
000004d2 I--Q-- 1 perm 1f1f0000 32 -1 keyring _uid.32: 1/4
000004d3 I--Q-- 3 perm 1f1f0000 32 -1 keyring _uid_ses.32: empty
00000001 I----- 39 perm 1f3f0000 0 0 keyring _uid_ses.0: 1/4
00000002 I----- 2 perm 1f3f0000 0 0 keyring _uid.0: empty
00000007 I----- 1 perm 1f3f0000 0 0 keyring _pid.1: empty
0000018d I----- 1 perm 1f3f0000 0 0 keyring _pid.412: empty
000004d2 I--Q-- 1 perm 1f3f0000 32 -1 keyring _uid.32: 1/4
000004d3 I--Q-- 3 perm 1f3f0000 32 -1 keyring _uid_ses.32: empty
00000892 I--QU- 1 perm 1f000000 0 0 user metal:copper: 0
00000893 I--Q-N 1 35s 1f1f0000 0 0 user metal:silver: 0
00000894 I--Q-- 1 10h 001f0000 0 0 user metal:gold: 0
00000893 I--Q-N 1 35s 1f3f0000 0 0 user metal:silver: 0
00000894 I--Q-- 1 10h 003f0000 0 0 user metal:gold: 0
The flags are:

24
Documentation/m68k/kernel-options.txt
View File

@ -626,7 +626,7 @@ ignored (others aren't affected).
can be performed in optimal order. Not all SCSI devices support
tagged queuing (:-().
4.6 switches=
4.5 switches=
-------------
Syntax: switches=<list of switches>
@ -661,28 +661,6 @@ correctly.
earlier initialization ("ov_"-less) takes precedence. But the
switching-off on reset still happens in this case.
4.5) stram_swap=
----------------
Syntax: stram_swap=<do_swap>[,<max_swap>]
This option is available only if the kernel has been compiled with
CONFIG_STRAM_SWAP enabled. Normally, the kernel then determines
dynamically whether to actually use ST-RAM as swap space. (Currently,
the fraction of ST-RAM must be less or equal 1/3 of total memory to
enable this swapping.) You can override the kernel's decision by
specifying this option. 1 for <do_swap> means always enable the swap,
even if you have less alternate RAM. 0 stands for never swap to
ST-RAM, even if it's small enough compared to the rest of memory.
If ST-RAM swapping is enabled, the kernel usually uses all free
ST-RAM as swap "device". If the kernel resides in ST-RAM, the region
allocated by it is obviously never used for swapping :-) You can also
limit this amount by specifying the second parameter, <max_swap>, if
you want to use parts of ST-RAM as normal system memory. <max_swap> is
in kBytes and the number should be a multiple of 4 (otherwise: rounded
down).
5) Options for Amiga Only:
==========================

168
Documentation/mips/AU1xxx_IDE.README Normal file
View File

@ -0,0 +1,168 @@
README for MIPS AU1XXX IDE driver - Released 2005-07-15
ABOUT
-----
This file describes the 'drivers/ide/mips/au1xxx-ide.c', related files and the
services they provide.
If you are short in patience and just want to know how to add your hard disc to
the white or black list, go to the 'ADD NEW HARD DISC TO WHITE OR BLACK LIST'
section.
LICENSE
-------
Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
This program is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free Software
Foundation; either version 2 of the License, or (at your option) any later
version.
THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
675 Mass Ave, Cambridge, MA 02139, USA.
Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
Interface and Linux Device Driver" Application Note.
FILES, CONFIGS AND COMPATABILITY
--------------------------------
Two files are introduced:
a) 'include/asm-mips/mach-au1x00/au1xxx_ide.h'
containes : struct _auide_hwif
struct drive_list_entry dma_white_list
struct drive_list_entry dma_black_list
timing parameters for PIO mode 0/1/2/3/4
timing parameters for MWDMA 0/1/2
b) 'drivers/ide/mips/au1xxx-ide.c'
contains the functionality of the AU1XXX IDE driver
Four configs variables are introduced:
CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - enable the PIO+DBDMA mode
CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - enable the MWDMA mode
CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - set Burstable FIFO in DBDMA
controler
CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size
per descriptor
If MWDMA is enabled and the connected hard disc is not on the white list, the
kernel switches to a "safe mwdma mode" at boot time. In this mode the IDE
performance is substantial slower then in full speed mwdma. In this case
please add your hard disc to the white list (follow instruction from 'ADD NEW
HARD DISC TO WHITE OR BLACK LIST' section).
SUPPORTED IDE MODES
-------------------
The AU1XXX IDE driver supported all PIO modes - PIO mode 0/1/2/3/4 - and all
MWDMA modes - MWDMA 0/1/2 -. There is no support for SWDMA and UDMA mode.
To change the PIO mode use the program hdparm with option -p, e.g.
'hdparm -p0 [device]' for PIO mode 0. To enable the MWDMA mode use the option
-X, e.g. 'hdparm -X32 [device]' for MWDMA mode 0.
PERFORMANCE CONFIGURATIONS
--------------------------
If the used system doesn't need USB support enable the following kernel configs:
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDE_AU1XXX=y
CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON=y
CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
If the used system need the USB support enable the following kernel configs for
high IDE to USB throughput.
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDE_AU1XXX=y
CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
ADD NEW HARD DISC TO WHITE OR BLACK LIST
----------------------------------------
Step 1 : detect the model name of your hard disc
a) connect your hard disc to the AU1XXX
b) boot your kernel and get the hard disc model.
Example boot log:
--snipped--
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Au1xxx IDE(builtin) configured for MWDMA2
Probing IDE interface ide0...
hda: Maxtor 6E040L0, ATA DISK drive
ide0 at 0xac800000-0xac800007,0xac8001c0 on irq 64
hda: max request size: 64KiB
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, (U)DMA
--snipped--
In this example 'Maxtor 6E040L0'.
Step 2 : edit 'include/asm-mips/mach-au1x00/au1xxx_ide.h'
Add your hard disc to the dma_white_list or dma_black_list structur.
Step 3 : Recompile the kernel
Enable MWDMA support in the kernel configuration. Recompile the kernel and
reboot.
Step 4 : Tests
If you have add a hard disc to the white list, please run some stress tests
for verification.
ACKNOWLEDGMENTS
---------------
These drivers wouldn't have been done without the base of kernel 2.4.x AU1XXX
IDE driver from AMD.
Additional input also from:
Matthias Lenk <matthias.lenk@amd.com>
Happy hacking!
Enrico Walther <enrico.walther@amd.com>

2
Documentation/networking/ip-sysctl.txt
View File

@ -309,7 +309,7 @@ tcp_tso_win_divisor - INTEGER
can be consumed by a single TSO frame.
The setting of this parameter is a choice between burstiness and
building larger TSO frames.
Default: 8
Default: 3
tcp_frto - BOOLEAN
Enables F-RTO, an enhanced recovery algorithm for TCP retransmission

195
Documentation/networking/s2io.txt
View File

@ -1,48 +1,153 @@
S2IO Technologies XFrame 10 Gig adapter.
-------------------------------------------
Release notes for Neterion's (Formerly S2io) Xframe I/II PCI-X 10GbE driver.
I. Module loadable parameters.
When loaded as a module, the driver provides a host of Module loadable
parameters, so the device can be tuned as per the users needs.
A list of the Module params is given below.
(i) ring_num: This can be used to program the number of
receive rings used in the driver.
(ii) ring_len: This defines the number of descriptors each ring
can have. There can be a maximum of 8 rings.
(iii) frame_len: This is an array of size 8. Using this we can
set the maximum size of the received frame that can
be steered into the corrsponding receive ring.
(iv) fifo_num: This defines the number of Tx FIFOs thats used in
the driver.
(v) fifo_len: Each element defines the number of
Tx descriptors that can be associated with each
corresponding FIFO. There are a maximum of 8 FIFOs.
(vi) tx_prio: This is a bool, if module is loaded with a non-zero
value for tx_prio multi FIFO scheme is activated.
(vii) rx_prio: This is a bool, if module is loaded with a non-zero
value for tx_prio multi RING scheme is activated.
(viii) latency_timer: The value given against this param will be
loaded into the latency timer register in PCI Config
space, else the register is left with its reset value.
Contents
=======
- 1. Introduction
- 2. Identifying the adapter/interface
- 3. Features supported
- 4. Command line parameters
- 5. Performance suggestions
- 6. Available Downloads
II. Performance tuning.
By changing a few sysctl parameters.
Copy the following lines into a file and run the following command,
"sysctl -p <file_name>"
### IPV4 specific settings
net.ipv4.tcp_timestamps = 0 # turns TCP timestamp support off, default 1, reduces CPU use
net.ipv4.tcp_sack = 0 # turn SACK support off, default on
# on systems with a VERY fast bus -> memory interface this is the big gainer
net.ipv4.tcp_rmem = 10000000 10000000 10000000 # sets min/default/max TCP read buffer, default 4096 87380 174760
net.ipv4.tcp_wmem = 10000000 10000000 10000000 # sets min/pressure/max TCP write buffer, default 4096 16384 131072
net.ipv4.tcp_mem = 10000000 10000000 10000000 # sets min/pressure/max TCP buffer space, default 31744 32256 32768
### CORE settings (mostly for socket and UDP effect)
net.core.rmem_max = 524287 # maximum receive socket buffer size, default 131071
net.core.wmem_max = 524287 # maximum send socket buffer size, default 131071
net.core.rmem_default = 524287 # default receive socket buffer size, default 65535
net.core.wmem_default = 524287 # default send socket buffer size, default 65535
net.core.optmem_max = 524287 # maximum amount of option memory buffers, default 10240
net.core.netdev_max_backlog = 300000 # number of unprocessed input packets before kernel starts dropping them, default 300
---End of performance tuning file---
1. Introduction:
This Linux driver supports Neterion's Xframe I PCI-X 1.0 and
Xframe II PCI-X 2.0 adapters. It supports several features
such as jumbo frames, MSI/MSI-X, checksum offloads, TSO, UFO and so on.
See below for complete list of features.
All features are supported for both IPv4 and IPv6.
2. Identifying the adapter/interface:
a. Insert the adapter(s) in your system.
b. Build and load driver
# insmod s2io.ko
c. View log messages
# dmesg | tail -40
You will see messages similar to:
eth3: Neterion Xframe I 10GbE adapter (rev 3), Version 2.0.9.1, Intr type INTA
eth4: Neterion Xframe II 10GbE adapter (rev 2), Version 2.0.9.1, Intr type INTA
eth4: Device is on 64 bit 133MHz PCIX(M1) bus
The above messages identify the adapter type(Xframe I/II), adapter revision,
driver version, interface name(eth3, eth4), Interrupt type(INTA, MSI, MSI-X).
In case of Xframe II, the PCI/PCI-X bus width and frequency are displayed
as well.
To associate an interface with a physical adapter use "ethtool -p <ethX>".
The corresponding adapter's LED will blink multiple times.
3. Features supported:
a. Jumbo frames. Xframe I/II supports MTU upto 9600 bytes,
modifiable using ifconfig command.
b. Offloads. Supports checksum offload(TCP/UDP/IP) on transmit
and receive, TSO.
c. Multi-buffer receive mode. Scattering of packet across multiple
buffers. Currently driver supports 2-buffer mode which yields
significant performance improvement on certain platforms(SGI Altix,
IBM xSeries).
d. MSI/MSI-X. Can be enabled on platforms which support this feature
(IA64, Xeon) resulting in noticeable performance improvement(upto 7%
on certain platforms).
e. NAPI. Compile-time option(CONFIG_S2IO_NAPI) for better Rx interrupt
moderation.
f. Statistics. Comprehensive MAC-level and software statistics displayed
using "ethtool -S" option.
g. Multi-FIFO/Ring. Supports up to 8 transmit queues and receive rings,
with multiple steering options.
4. Command line parameters
a. tx_fifo_num
Number of transmit queues
Valid range: 1-8
Default: 1
b. rx_ring_num
Number of receive rings
Valid range: 1-8
Default: 1
c. tx_fifo_len
Size of each transmit queue
Valid range: Total length of all queues should not exceed 8192
Default: 4096
d. rx_ring_sz
Size of each receive ring(in 4K blocks)
Valid range: Limited by memory on system
Default: 30
e. intr_type
Specifies interrupt type. Possible values 1(INTA), 2(MSI), 3(MSI-X)
Valid range: 1-3
Default: 1
5. Performance suggestions
General:
a. Set MTU to maximum(9000 for switch setup, 9600 in back-to-back configuration)
b. Set TCP windows size to optimal value.
For instance, for MTU=1500 a value of 210K has been observed to result in
good performance.
# sysctl -w net.ipv4.tcp_rmem="210000 210000 210000"
# sysctl -w net.ipv4.tcp_wmem="210000 210000 210000"
For MTU=9000, TCP window size of 10 MB is recommended.
# sysctl -w net.ipv4.tcp_rmem="10000000 10000000 10000000"
# sysctl -w net.ipv4.tcp_wmem="10000000 10000000 10000000"
Transmit performance:
a. By default, the driver respects BIOS settings for PCI bus parameters.
However, you may want to experiment with PCI bus parameters
max-split-transactions(MOST) and MMRBC (use setpci command).
A MOST value of 2 has been found optimal for Opterons and 3 for Itanium.
It could be different for your hardware.
Set MMRBC to 4K**.
For example you can set
For opteron
#setpci -d 17d5:* 62=1d
For Itanium
#setpci -d 17d5:* 62=3d
For detailed description of the PCI registers, please see Xframe User Guide.
b. Ensure Transmit Checksum offload is enabled. Use ethtool to set/verify this
parameter.
c. Turn on TSO(using "ethtool -K")
# ethtool -K <ethX> tso on
Receive performance:
a. By default, the driver respects BIOS settings for PCI bus parameters.
However, you may want to set PCI latency timer to 248.
#setpci -d 17d5:* LATENCY_TIMER=f8
For detailed description of the PCI registers, please see Xframe User Guide.
b. Use 2-buffer mode. This results in large performance boost on
on certain platforms(eg. SGI Altix, IBM xSeries).
c. Ensure Receive Checksum offload is enabled. Use "ethtool -K ethX" command to
set/verify this option.
d. Enable NAPI feature(in kernel configuration Device Drivers ---> Network
device support ---> Ethernet (10000 Mbit) ---> S2IO 10Gbe Xframe NIC) to
bring down CPU utilization.
** For AMD opteron platforms with 8131 chipset, MMRBC=1 and MOST=1 are
recommended as safe parameters.
For more information, please review the AMD8131 errata at
http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26310.pdf
6. Available Downloads
Neterion "s2io" driver in Red Hat and Suse 2.6-based distributions is kept up
to date, also the latest "s2io" code (including support for 2.4 kernels) is
available via "Support" link on the Neterion site: http://www.neterion.com.
For Xframe User Guide (Programming manual), visit ftp site ns1.s2io.com,
user: linuxdocs password: HALdocs
7. Support
For further support please contact either your 10GbE Xframe NIC vendor (IBM,
HP, SGI etc.) or click on the "Support" link on the Neterion site:
http://www.neterion.com.

45
Documentation/scsi/LICENSE.qla2xxx Normal file
View File

@ -0,0 +1,45 @@
Copyright (c) 2003-2005 QLogic Corporation
QLogic Linux Fibre Channel HBA Driver
This program includes a device driver for Linux 2.6 that may be
distributed with QLogic hardware specific firmware binary file.
You may modify and redistribute the device driver code under the
GNU General Public License as published by the Free Software
Foundation (version 2 or a later version).
You may redistribute the hardware specific firmware binary file
under the following terms:
1. Redistribution of source code (only if applicable),
must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistribution in binary form must reproduce the above
copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other
materials provided with the distribution.
3. The name of QLogic Corporation may not be used to
endorse or promote products derived from this software
without specific prior written permission
REGARDLESS OF WHAT LICENSING MECHANISM IS USED OR APPLICABLE,
THIS PROGRAM IS PROVIDED BY QLOGIC CORPORATION "AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
USER ACKNOWLEDGES AND AGREES THAT USE OF THIS PROGRAM WILL NOT
CREATE OR GIVE GROUNDS FOR A LICENSE BY IMPLICATION, ESTOPPEL, OR
OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT,
TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN
ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN
COMBINATION WITH THIS PROGRAM.

66
Documentation/serial/driver
View File

@ -116,12 +116,15 @@ hardware.
line becoming inactive or the tty layer indicating we want
to stop transmission due to an XOFF character.
The driver should stop transmitting characters as soon as
possible.
Locking: port->lock taken.
Interrupts: locally disabled.
This call must not sleep
start_tx(port)
start transmitting characters.
Start transmitting characters.
Locking: port->lock taken.
Interrupts: locally disabled.
@ -281,26 +284,31 @@ hardware.
Other functions
---------------
uart_update_timeout(port,cflag,quot)
uart_update_timeout(port,cflag,baud)
Update the FIFO drain timeout, port->timeout, according to the
number of bits, parity, stop bits and quotient.
number of bits, parity, stop bits and baud rate.
Locking: caller is expected to take port->lock
Interrupts: n/a
uart_get_baud_rate(port,termios)
uart_get_baud_rate(port,termios,old,min,max)
Return the numeric baud rate for the specified termios, taking
account of the special 38400 baud "kludge". The B0 baud rate
is mapped to 9600 baud.
If the baud rate is not within min..max, then if old is non-NULL,
the original baud rate will be tried. If that exceeds the
min..max constraint, 9600 baud will be returned. termios will
be updated to the baud rate in use.
Note: min..max must always allow 9600 baud to be selected.
Locking: caller dependent.
Interrupts: n/a
uart_get_divisor(port,termios,oldtermios)
Return the divsor (baud_base / baud) for the selected baud rate
specified by termios. If the baud rate is out of range, try
the original baud rate specified by oldtermios (if non-NULL).
If that fails, try 9600 baud.
uart_get_divisor(port,baud)
Return the divsor (baud_base / baud) for the specified baud
rate, appropriately rounded.
If 38400 baud and custom divisor is selected, return the
custom divisor instead.
@ -308,6 +316,46 @@ uart_get_divisor(port,termios,oldtermios)
Locking: caller dependent.
Interrupts: n/a
uart_match_port(port1,port2)
This utility function can be used to determine whether two
uart_port structures describe the same port.
Locking: n/a
Interrupts: n/a
uart_write_wakeup(port)
A driver is expected to call this function when the number of
characters in the transmit buffer have dropped below a threshold.
Locking: port->lock should be held.
Interrupts: n/a
uart_register_driver(drv)
Register a uart driver with the core driver. We in turn register
with the tty layer, and initialise the core driver per-port state.
drv->port should be NULL, and the per-port structures should be
registered using uart_add_one_port after this call has succeeded.
Locking: none
Interrupts: enabled
uart_unregister_driver()
Remove all references to a driver from the core driver. The low
level driver must have removed all its ports via the
uart_remove_one_port() if it registered them with uart_add_one_port().
Locking: none
Interrupts: enabled
uart_suspend_port()
uart_resume_port()
uart_add_one_port()
uart_remove_one_port()
Other notes
-----------

59
MAINTAINERS
View File

@ -116,12 +116,6 @@ M: ajk@iehk.rwth-aachen.de
L: linux-hams@vger.kernel.org
S: Maintained
YEALINK PHONE DRIVER
P: Henk Vergonet
M: Henk.Vergonet@gmail.com
L: usbb2k-api-dev@nongnu.org
S: Maintained
8139CP 10/100 FAST ETHERNET DRIVER
P: Jeff Garzik
M: jgarzik@pobox.com
@ -197,6 +191,15 @@ M: Thorsten Knabe <linux@thorsten-knabe.de>
W: http://linux.thorsten-knabe.de
S: Maintained
AD1889 SOUND DRIVER
P: Kyle McMartin
M: kyle@parisc-linux.org
P: Thibaut Varene
M: T-Bone@parisc-linux.org
W: http://wiki.parisc-linux.org/AD1889
L: parisc-linux@lists.parisc-linux.org
S: Maintained
ADM1025 HARDWARE MONITOR DRIVER
P: Jean Delvare
M: khali@linux-fr.org
@ -907,6 +910,15 @@ L: linux-fbdev-devel@lists.sourceforge.net
W: http://linux-fbdev.sourceforge.net/
S: Maintained
FREESCALE SOC FS_ENET DRIVER
P: Pantelis Antoniou
M: pantelis.antoniou@gmail.com
P: Vitaly Bordug
M: vbordug@ru.mvista.com
L: linuxppc-embedded@ozlabs.org
L: netdev@vger.kernel.org
S: Maintained
FILE LOCKING (flock() and fcntl()/lockf())
P: Matthew Wilcox
M: matthew@wil.cx
@ -1640,7 +1652,7 @@ S: Maintained
MIPS
P: Ralf Baechle
M: ralf@linux-mips.org
W: http://oss.sgi.com/mips/mips-howto.html
W: http://www.linux-mips.org/
L: linux-mips@linux-mips.org
S: Maintained
@ -1942,6 +1954,14 @@ M: george@mvista.com
L: netdev@vger.kernel.org
S: Supported
POWERPC 4xx EMAC DRIVER
P: Eugene Surovegin
M: ebs@ebshome.net
W: http://kernel.ebshome.net/emac/
L: linuxppc-embedded@ozlabs.org
L: netdev@vger.kernel.org
S: Maintained
PNP SUPPORT
P: Adam Belay
M: ambx1@neo.rr.com
@ -2275,6 +2295,11 @@ W: http://tpmdd.sourceforge.net
L: tpmdd-devel@lists.sourceforge.net
S: Maintained
Telecom Clock Driver for MCPL0010
P: Mark Gross
M: mark.gross@intel.com
S: Supported
TENSILICA XTENSA PORT (xtensa):
P: Chris Zankel
M: chris@zankel.net
@ -2486,14 +2511,6 @@ L: linux-kernel@vger.kernel.org
L: linux-usb-devel@lists.sourceforge.net
S: Supported
USB BLUETOOTH TTY CONVERTER DRIVER
P: Greg Kroah-Hartman
M: greg@kroah.com
L: linux-usb-users@lists.sourceforge.net
L: linux-usb-devel@lists.sourceforge.net
S: Maintained
W: http://www.kroah.com/linux-usb/
USB CDC ETHERNET DRIVER
P: Greg Kroah-Hartman
M: greg@kroah.com
@ -2727,6 +2744,12 @@ P: Roger Luethi
M: rl@hellgate.ch
S: Maintained
VIAPRO SMBUS DRIVER
P: Jean Delvare
M: khali@linux-fr.org
L: lm-sensors@lm-sensors.org
S: Maintained
UCLINUX (AND M68KNOMMU)
P: Greg Ungerer
M: gerg@uclinux.org
@ -2848,6 +2871,12 @@ M: jpr@f6fbb.org
L: linux-hams@vger.kernel.org
S: Maintained
YEALINK PHONE DRIVER
P: Henk Vergonet
M: Henk.Vergonet@gmail.com
L: usbb2k-api-dev@nongnu.org
S: Maintained
YMFPCI YAMAHA PCI SOUND (Use ALSA instead)
P: Pete Zaitcev
M: zaitcev@yahoo.com

4
Makefile
View File

@ -371,8 +371,8 @@ export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_ve
# Files to ignore in find ... statements
RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg \) -prune -o
export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg
RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o
export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git
# ===========================================================================
# Rules shared between *config targets and build targets

4
README
View File

@ -54,6 +54,10 @@ INSTALLING the kernel:
gzip -cd linux-2.6.XX.tar.gz | tar xvf -
or
bzip2 -dc linux-2.6.XX.tar.bz2 | tar xvf -
Replace "XX" with the version number of the latest kernel.
Do NOT use the /usr/src/linux area! This area has a (usually

4
arch/alpha/kernel/time.c
View File

@ -55,10 +55,6 @@
#include "proto.h"
#include "irq_impl.h"
u64 jiffies_64 = INITIAL_JIFFIES;
EXPORT_SYMBOL(jiffies_64);
extern unsigned long wall_jiffies; /* kernel/timer.c */
static int set_rtc_mmss(unsigned long);

3
arch/alpha/mm/numa.c
View File

@ -371,6 +371,8 @@ show_mem(void)
show_free_areas();
printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
for_each_online_node(nid) {
unsigned long flags;
pgdat_resize_lock(NODE_DATA(nid), &flags);
i = node_spanned_pages(nid);
while (i-- > 0) {
struct page *page = nid_page_nr(nid, i);
@ -384,6 +386,7 @@ show_mem(void)
else
shared += page_count(page) - 1;
}
pgdat_resize_unlock(NODE_DATA(nid), &flags);
}
printk("%ld pages of RAM\n",total);
printk("%ld free pages\n",free);

6
arch/alpha/mm/remap.c
View File

@ -2,7 +2,6 @@
#include <asm/pgalloc.h>
#include <asm/cacheflush.h>
/* called with the page_table_lock held */
static inline void
remap_area_pte(pte_t * pte, unsigned long address, unsigned long size,
unsigned long phys_addr, unsigned long flags)
@ -31,7 +30,6 @@ remap_area_pte(pte_t * pte, unsigned long address, unsigned long size,
} while (address && (address < end));
}
/* called with the page_table_lock held */
static inline int
remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size,
unsigned long phys_addr, unsigned long flags)
@ -46,7 +44,7 @@ remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size,
if (address >= end)
BUG();
do {
pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
pte_t * pte = pte_alloc_kernel(pmd, address);
if (!pte)
return -ENOMEM;
remap_area_pte(pte, address, end - address,
@ -70,7 +68,6 @@ __alpha_remap_area_pages(unsigned long address, unsigned long phys_addr,
flush_cache_all();
if (address >= end)
BUG();
spin_lock(&init_mm.page_table_lock);
do {
pmd_t *pmd;
pmd = pmd_alloc(&init_mm, dir, address);
@ -84,7 +81,6 @@ __alpha_remap_area_pages(unsigned long address, unsigned long phys_addr,
address = (address + PGDIR_SIZE) & PGDIR_MASK;
dir++;
} while (address && (address < end));
spin_unlock(&init_mm.page_table_lock);
return error;
}

17
arch/arm/Kconfig
View File

@ -194,6 +194,13 @@ config ARCH_VERSATILE
help
This enables support for ARM Ltd Versatile board.
config ARCH_REALVIEW
bool "RealView"
select ARM_AMBA
select ICST307
help
This enables support for ARM Ltd RealView boards.
config ARCH_IMX
bool "IMX"
@ -204,6 +211,7 @@ config ARCH_H720X
config ARCH_AAEC2000
bool "Agilent AAEC-2000 based"
select ARM_AMBA
help
This enables support for systems based on the Agilent AAEC-2000
@ -243,6 +251,8 @@ source "arch/arm/mach-versatile/Kconfig"
source "arch/arm/mach-aaec2000/Kconfig"
source "arch/arm/mach-realview/Kconfig"
# Definitions to make life easier
config ARCH_ACORN
bool
@ -339,6 +349,13 @@ config NR_CPUS
depends on SMP
default "4"
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
depends on SMP && HOTPLUG && EXPERIMENTAL
help
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
config PREEMPT
bool "Preemptible Kernel (EXPERIMENTAL)"
depends on EXPERIMENTAL

18
arch/arm/Makefile
View File

@ -8,7 +8,7 @@
# Copyright (C) 1995-2001 by Russell King
LDFLAGS_vmlinux :=-p --no-undefined -X
CPPFLAGS_vmlinux.lds = -DTEXTADDR=$(TEXTADDR) -DDATAADDR=$(DATAADDR)
CPPFLAGS_vmlinux.lds = -DKERNEL_RAM_ADDR=$(TEXTADDR)
OBJCOPYFLAGS :=-O binary -R .note -R .comment -S
GZFLAGS :=-9
#CFLAGS +=-pipe
@ -38,6 +38,7 @@ comma = ,
# macro, but instead defines a whole series of macros which makes
# testing for a specific architecture or later rather impossible.
arch-$(CONFIG_CPU_32v6) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
arch-$(CONFIG_CPU_32v6K) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
arch-$(CONFIG_CPU_32v5) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4)
arch-$(CONFIG_CPU_32v4) :=-D__LINUX_ARM_ARCH__=4 -march=armv4
arch-$(CONFIG_CPU_32v3) :=-D__LINUX_ARM_ARCH__=3 -march=armv3
@ -99,6 +100,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000
machine-$(CONFIG_ARCH_IMX) := imx
machine-$(CONFIG_ARCH_H720X) := h720x
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
machine-$(CONFIG_ARCH_REALVIEW) := realview
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
@ -108,27 +110,19 @@ export CFLAGS_3c589_cs.o
endif
TEXTADDR := $(textaddr-y)
ifeq ($(CONFIG_XIP_KERNEL),y)
DATAADDR := $(TEXTADDR)
xipaddr-$(CONFIG_ARCH_CO285) := 0x5f000000
xipaddr-y ?= 0xbf000000
# Replace phys addr with virt addr while keeping offset from base.
TEXTADDR := $(shell echo $(CONFIG_XIP_PHYS_ADDR) $(xipaddr-y) | \
awk --non-decimal-data '/[:xdigit:]/ \
{ printf("0x%x\n", and($$1, 0x000fffff) + $$2) }' )
endif
ifeq ($(incdir-y),)
incdir-y := $(machine-y)
endif
INCDIR := arch-$(incdir-y)
ifneq ($(machine-y),)
MACHINE := arch/arm/mach-$(machine-y)/
else
MACHINE :=
endif
export TEXTADDR DATAADDR GZFLAGS
export TEXTADDR GZFLAGS
# Do we have FASTFPE?
FASTFPE :=arch/arm/fastfpe
@ -150,7 +144,7 @@ drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/
drivers-$(CONFIG_ARCH_CLPS7500) += drivers/acorn/char/
drivers-$(CONFIG_ARCH_L7200) += drivers/acorn/char/
libs-y += arch/arm/lib/
libs-y := arch/arm/lib/ $(libs-y)
# Default target when executing plain make
ifeq ($(CONFIG_XIP_KERNEL),y)

2
arch/arm/boot/compressed/misc.c
View File

@ -30,7 +30,7 @@ unsigned int __machine_arch_type;
#define putstr icedcc_putstr
#define putc icedcc_putc
extern void idedcc_putc(int ch);
extern void icedcc_putc(int ch);
static void
icedcc_putstr(const char *ptr)

2
arch/arm/common/amba.c
View File

@ -10,6 +10,8 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <asm/io.h>
#include <asm/irq.h>

165
arch/arm/common/dmabounce.c
View File

@ -33,8 +33,8 @@
#include <asm/cacheflush.h>
#undef DEBUG
#undef STATS
#ifdef STATS
#define DO_STATS(X) do { X ; } while (0)
#else
@ -52,26 +52,31 @@ struct safe_buffer {
int direction;
/* safe buffer info */
struct dma_pool *pool;
struct dmabounce_pool *pool;
void *safe;
dma_addr_t safe_dma_addr;
};
struct dmabounce_pool {
unsigned long size;
struct dma_pool *pool;
#ifdef STATS
unsigned long allocs;
#endif
};
struct dmabounce_device_info {
struct list_head node;
struct device *dev;
struct dma_pool *small_buffer_pool;
struct dma_pool *large_buffer_pool;
struct list_head safe_buffers;
unsigned long small_buffer_size, large_buffer_size;
#ifdef STATS
unsigned long sbp_allocs;
unsigned long lbp_allocs;
unsigned long total_allocs;
unsigned long map_op_count;
unsigned long bounce_count;
#endif
struct dmabounce_pool small;
struct dmabounce_pool large;
};
static LIST_HEAD(dmabounce_devs);
@ -82,9 +87,9 @@ static void print_alloc_stats(struct dmabounce_device_info *device_info)
printk(KERN_INFO
"%s: dmabounce: sbp: %lu, lbp: %lu, other: %lu, total: %lu\n",
device_info->dev->bus_id,
device_info->sbp_allocs, device_info->lbp_allocs,
device_info->total_allocs - device_info->sbp_allocs -
device_info->lbp_allocs,
device_info->small.allocs, device_info->large.allocs,
device_info->total_allocs - device_info->small.allocs -
device_info->large.allocs,
device_info->total_allocs);
}
#endif
@ -106,18 +111,22 @@ find_dmabounce_dev(struct device *dev)
/* allocate a 'safe' buffer and keep track of it */
static inline struct safe_buffer *
alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr,
size_t size, enum dma_data_direction dir)
size_t size, enum dma_data_direction dir)
{
struct safe_buffer *buf;
struct dma_pool *pool;
struct dmabounce_pool *pool;
struct device *dev = device_info->dev;
void *safe;
dma_addr_t safe_dma_addr;
dev_dbg(dev, "%s(ptr=%p, size=%d, dir=%d)\n",
__func__, ptr, size, dir);
DO_STATS ( device_info->total_allocs++ );
if (size <= device_info->small.size) {
pool = &device_info->small;
} else if (size <= device_info->large.size) {
pool = &device_info->large;
} else {
pool = NULL;
}
buf = kmalloc(sizeof(struct safe_buffer), GFP_ATOMIC);
if (buf == NULL) {
@ -125,41 +134,35 @@ alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr,
return NULL;
}
if (size <= device_info->small_buffer_size) {
pool = device_info->small_buffer_pool;
safe = dma_pool_alloc(pool, GFP_ATOMIC, &safe_dma_addr);
buf->ptr = ptr;
buf->size = size;
buf->direction = dir;
buf->pool = pool;
DO_STATS ( device_info->sbp_allocs++ );
} else if (size <= device_info->large_buffer_size) {
pool = device_info->large_buffer_pool;
safe = dma_pool_alloc(pool, GFP_ATOMIC, &safe_dma_addr);
DO_STATS ( device_info->lbp_allocs++ );
if (pool) {
buf->safe = dma_pool_alloc(pool->pool, GFP_ATOMIC,
&buf->safe_dma_addr);
} else {
pool = NULL;
safe = dma_alloc_coherent(dev, size, &safe_dma_addr, GFP_ATOMIC);
buf->safe = dma_alloc_coherent(dev, size, &buf->safe_dma_addr,
GFP_ATOMIC);
}
if (safe == NULL) {
dev_warn(device_info->dev,
"%s: could not alloc dma memory (size=%d)\n",
__func__, size);
if (buf->safe == NULL) {
dev_warn(dev,
"%s: could not alloc dma memory (size=%d)\n",
__func__, size);
kfree(buf);
return NULL;
}
#ifdef STATS
if (pool)
pool->allocs++;
device_info->total_allocs++;
if (device_info->total_allocs % 1000 == 0)
print_alloc_stats(device_info);
#endif
buf->ptr = ptr;
buf->size = size;
buf->direction = dir;
buf->pool = pool;
buf->safe = safe;
buf->safe_dma_addr = safe_dma_addr;
list_add(&buf->node, &device_info->safe_buffers);
return buf;
@ -186,7 +189,7 @@ free_safe_buffer(struct dmabounce_device_info *device_info, struct safe_buffer *
list_del(&buf->node);
if (buf->pool)
dma_pool_free(buf->pool, buf->safe, buf->safe_dma_addr);
dma_pool_free(buf->pool->pool, buf->safe, buf->safe_dma_addr);
else
dma_free_coherent(device_info->dev, buf->size, buf->safe,
buf->safe_dma_addr);
@ -197,12 +200,10 @@ free_safe_buffer(struct dmabounce_device_info *device_info, struct safe_buffer *
/* ************************************************** */
#ifdef STATS
static void print_map_stats(struct dmabounce_device_info *device_info)
{
printk(KERN_INFO
"%s: dmabounce: map_op_count=%lu, bounce_count=%lu\n",
device_info->dev->bus_id,
dev_info(device_info->dev,
"dmabounce: map_op_count=%lu, bounce_count=%lu\n",
device_info->map_op_count, device_info->bounce_count);
}
#endif
@ -258,13 +259,13 @@ map_single(struct device *dev, void *ptr, size_t size,
__func__, ptr, buf->safe, size);
memcpy(buf->safe, ptr, size);
}
consistent_sync(buf->safe, size, dir);
ptr = buf->safe;
dma_addr = buf->safe_dma_addr;
} else {
consistent_sync(ptr, size, dir);
}
consistent_sync(ptr, size, dir);
return dma_addr;
}
@ -278,7 +279,7 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
/*
* Trying to unmap an invalid mapping
*/
if (dma_addr == ~0) {
if (dma_mapping_error(dma_addr)) {
dev_err(dev, "Trying to unmap invalid mapping\n");
return;
}
@ -570,11 +571,25 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents,
local_irq_restore(flags);
}
static int
dmabounce_init_pool(struct dmabounce_pool *pool, struct device *dev, const char *name,
unsigned long size)
{
pool->size = size;
DO_STATS(pool->allocs = 0);
pool->pool = dma_pool_create(name, dev, size,
0 /* byte alignment */,
0 /* no page-crossing issues */);
return pool->pool ? 0 : -ENOMEM;
}
int
dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
unsigned long large_buffer_size)
{
struct dmabounce_device_info *device_info;
int ret;
device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC);
if (!device_info) {
@ -584,45 +599,31 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
return -ENOMEM;
}
device_info->small_buffer_pool =
dma_pool_create("small_dmabounce_pool",
dev,
small_buffer_size,
0 /* byte alignment */,
0 /* no page-crossing issues */);
if (!device_info->small_buffer_pool) {
printk(KERN_ERR
"dmabounce: could not allocate small DMA pool for %s\n",
dev->bus_id);
kfree(device_info);
return -ENOMEM;
ret = dmabounce_init_pool(&device_info->small, dev,
"small_dmabounce_pool", small_buffer_size);
if (ret) {
dev_err(dev,
"dmabounce: could not allocate DMA pool for %ld byte objects\n",
small_buffer_size);
goto err_free;
}
if (large_buffer_size) {
device_info->large_buffer_pool =
dma_pool_create("large_dmabounce_pool",
dev,
large_buffer_size,
0 /* byte alignment */,
0 /* no page-crossing issues */);
if (!device_info->large_buffer_pool) {
printk(KERN_ERR
"dmabounce: could not allocate large DMA pool for %s\n",
dev->bus_id);
dma_pool_destroy(device_info->small_buffer_pool);
return -ENOMEM;
ret = dmabounce_init_pool(&device_info->large, dev,
"large_dmabounce_pool",
large_buffer_size);
if (ret) {
dev_err(dev,
"dmabounce: could not allocate DMA pool for %ld byte objects\n",
large_buffer_size);
goto err_destroy;
}
}
device_info->dev = dev;
device_info->small_buffer_size = small_buffer_size;
device_info->large_buffer_size = large_buffer_size;
INIT_LIST_HEAD(&device_info->safe_buffers);
#ifdef STATS
device_info->sbp_allocs = 0;
device_info->lbp_allocs = 0;
device_info->total_allocs = 0;
device_info->map_op_count = 0;
device_info->bounce_count = 0;
@ -634,6 +635,12 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
dev->bus_id, dev->bus->name);
return 0;
err_destroy:
dma_pool_destroy(device_info->small.pool);
err_free:
kfree(device_info);
return ret;
}
void
@ -655,10 +662,10 @@ dmabounce_unregister_dev(struct device *dev)
BUG();
}
if (device_info->small_buffer_pool)
dma_pool_destroy(device_info->small_buffer_pool);
if (device_info->large_buffer_pool)
dma_pool_destroy(device_info->large_buffer_pool);
if (device_info->small.pool)
dma_pool_destroy(device_info->small.pool);
if (device_info->large.pool)
dma_pool_destroy(device_info->large.pool);
#ifdef STATS
print_alloc_stats(device_info);

12
arch/arm/common/locomo.c
View File

@ -22,7 +22,7 @@
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
@ -550,15 +550,12 @@ struct locomo_save_data {
u16 LCM_SPIMD;
};
static int locomo_suspend(struct device *dev, pm_message_t state, u32 level)
static int locomo_suspend(struct device *dev, pm_message_t state)
{
struct locomo *lchip = dev_get_drvdata(dev);
struct locomo_save_data *save;
unsigned long flags;
if (level != SUSPEND_DISABLE)
return 0;
save = kmalloc(sizeof(struct locomo_save_data), GFP_KERNEL);
if (!save)
return -ENOMEM;
@ -597,16 +594,13 @@ static int locomo_suspend(struct device *dev, pm_message_t state, u32 level)
return 0;
}
static int locomo_resume(struct device *dev, u32 level)
static int locomo_resume(struct device *dev)
{
struct locomo *lchip = dev_get_drvdata(dev);
struct locomo_save_data *save;
unsigned long r;
unsigned long flags;
if (level != RESUME_ENABLE)
return 0;
save = (struct locomo_save_data *) dev->power.saved_state;
if (!save)
return 0;

13
arch/arm/common/sa1111.c
View File

@ -22,7 +22,7 @@
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/dma-mapping.h>
@ -801,7 +801,7 @@ struct sa1111_save_data {
#ifdef CONFIG_PM
static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level)
static int sa1111_suspend(struct device *dev, pm_message_t state)
{
struct sa1111 *sachip = dev_get_drvdata(dev);
struct sa1111_save_data *save;
@ -809,9 +809,6 @@ static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level)
unsigned int val;
void __iomem *base;
if (level != SUSPEND_DISABLE)
return 0;
save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL);
if (!save)
return -ENOMEM;
@ -856,23 +853,19 @@ static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level)
/*
* sa1111_resume - Restore the SA1111 device state.
* @dev: device to restore
* @level: resume level
*
* Restore the general state of the SA1111; clock control and
* interrupt controller. Other parts of the SA1111 must be
* restored by their respective drivers, and must be called
* via LDM after this function.
*/
static int sa1111_resume(struct device *dev, u32 level)
static int sa1111_resume(struct device *dev)
{
struct sa1111 *sachip = dev_get_drvdata(dev);
struct sa1111_save_data *save;
unsigned long flags, id;
void __iomem *base;
if (level != RESUME_ENABLE)
return 0;
save = (struct sa1111_save_data *)dev->power.saved_state;
if (!save)
return 0;

26
arch/arm/common/scoop.c
View File

@ -12,6 +12,8 @@
*/
#include <linux/device.h>
#include <linux/string.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/hardware/scoop.h>
@ -102,26 +104,24 @@ static void check_scoop_reg(struct scoop_dev *sdev)
}
#ifdef CONFIG_PM
static int scoop_suspend(struct device *dev, pm_message_t state, uint32_t level)
static int scoop_suspend(struct device *dev, pm_message_t state)
{
if (level == SUSPEND_POWER_DOWN) {
struct scoop_dev *sdev = dev_get_drvdata(dev);
struct scoop_dev *sdev = dev_get_drvdata(dev);
check_scoop_reg(sdev);
sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR);
SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set;
check_scoop_reg(sdev);
sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR);
SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set;
}
return 0;
}
static int scoop_resume(struct device *dev, uint32_t level)
static int scoop_resume(struct device *dev)
{
if (level == RESUME_POWER_ON) {
struct scoop_dev *sdev = dev_get_drvdata(dev);
struct scoop_dev *sdev = dev_get_drvdata(dev);
check_scoop_reg(sdev);
SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr;
check_scoop_reg(sdev);
SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr;
}
return 0;
}
#else

2
arch/arm/configs/ixdp2400_defconfig
View File

@ -559,7 +559,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_NR_UARTS=1
# CONFIG_SERIAL_8250_EXTENDED is not set
#

4
arch/arm/configs/ixdp2401_defconfig
View File

@ -152,7 +152,7 @@ CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
# CONFIG_XIP_KERNEL is not set
#
@ -560,7 +560,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_NR_UARTS=3
# CONFIG_SERIAL_8250_EXTENDED is not set
#

2
arch/arm/configs/ixdp2800_defconfig
View File

@ -559,7 +559,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_NR_UARTS=1
# CONFIG_SERIAL_8250_EXTENDED is not set
#

2
arch/arm/configs/ixdp2801_defconfig
View File

@ -560,7 +560,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_NR_UARTS=3
# CONFIG_SERIAL_8250_EXTENDED is not set
#

2
arch/arm/configs/ixp4xx_defconfig
View File

@ -104,7 +104,7 @@ CONFIG_ARCH_IXCDP1100=y
CONFIG_ARCH_PRPMC1100=y
CONFIG_ARCH_IXDP4XX=y
CONFIG_CPU_IXP46X=y
CONFIG_MACH_GTWX5715=y
# CONFIG_MACH_GTWX5715 is not set
#
# IXP4xx Options

789
arch/arm/configs/realview_defconfig Normal file
View File

@ -0,0 +1,789 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.14-rc2
# Thu Sep 29 14:50:10 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
#
# System Type
#
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_REALVIEW=y
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
#
# RealView platform type
#
CONFIG_MACH_REALVIEW_EB=y
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_ARM926T=y
# CONFIG_CPU_V6 is not set
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5TJ=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
#
# Processor Features
#
CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
CONFIG_ARM_GIC=y
CONFIG_ICST307=y
#
# Bus support
#
CONFIG_ARM_AMBA=y
CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Kernel Features
#
# CONFIG_NO_IDLE_HZ is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_ALIGNMENT_TRAP=y
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
# CONFIG_XIP_KERNEL is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
# CONFIG_VFP is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
#
# Power management options
#
# CONFIG_PM is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_AMDSTD_RETRY=0
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_ARM_INTEGRATOR=y
# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_ATA_OVER_ETH is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# I2O device support
#
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_AMBAKMI=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_AMBA_PL010 is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
#
# I2C support
#
# CONFIG_I2C is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_ARMCLCD=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ALSA ARM devices
#
# CONFIG_SND_ARMAACI is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_HFSPLUS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_LL is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y

2
arch/arm/kernel/Makefile
View File

@ -2,7 +2,7 @@
# Makefile for the linux kernel.
#
AFLAGS_head.o := -DTEXTADDR=$(TEXTADDR) -DDATAADDR=$(DATAADDR)
AFLAGS_head.o := -DKERNEL_RAM_ADDR=$(TEXTADDR)
# Object file lists.

1
arch/arm/kernel/arthur.c
View File

@ -18,6 +18,7 @@
#include <linux/stddef.h>
#include <linux/signal.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <asm/ptrace.h>

1
arch/arm/kernel/asm-offsets.c
View File

@ -94,7 +94,6 @@ int main(void)
DEFINE(VM_EXEC, VM_EXEC);
BLANK();
DEFINE(PAGE_SZ, PAGE_SIZE);
DEFINE(VIRT_OFFSET, PAGE_OFFSET);
BLANK();
DEFINE(SYS_ERROR0, 0x9f0000);
BLANK();

3
arch/arm/kernel/entry-armv.S
View File

@ -15,6 +15,7 @@
*/
#include <linux/config.h>
#include <asm/memory.h>
#include <asm/glue.h>
#include <asm/vfpmacros.h>
#include <asm/hardware.h> /* should be moved into entry-macro.S */
@ -310,7 +311,7 @@ __pabt_svc:
#if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
@ make sure our user space atomic helper is aborted
cmp r2, #VIRT_OFFSET
cmp r2, #TASK_SIZE
bichs r3, r3, #PSR_Z_BIT
#endif

57
arch/arm/kernel/head.S
View File

@ -21,6 +21,7 @@
#include <asm/procinfo.h>
#include <asm/ptrace.h>
#include <asm/asm-offsets.h>
#include <asm/memory.h>
#include <asm/thread_info.h>
#include <asm/system.h>
@ -33,52 +34,28 @@
#define MACHINFO_PGOFFIO 12
#define MACHINFO_NAME 16
#ifndef CONFIG_XIP_KERNEL
/*
* We place the page tables 16K below TEXTADDR. Therefore, we must make sure
* that TEXTADDR is correctly set. Currently, we expect the least significant
* 16 bits to be 0x8000, but we could probably relax this restriction to
* TEXTADDR >= PAGE_OFFSET + 0x4000
*
* Note that swapper_pg_dir is the virtual address of the page tables, and
* pgtbl gives us a position-independent reference to these tables. We can
* do this because stext == TEXTADDR
* swapper_pg_dir is the virtual address of the initial page table.
* We place the page tables 16K below KERNEL_RAM_ADDR. Therefore, we must
* make sure that KERNEL_RAM_ADDR is correctly set. Currently, we expect
* the least significant 16 bits to be 0x8000, but we could probably
* relax this restriction to KERNEL_RAM_ADDR >= PAGE_OFFSET + 0x4000.
*/
#if (TEXTADDR & 0xffff) != 0x8000
#error TEXTADDR must start at 0xXXXX8000
#if (KERNEL_RAM_ADDR & 0xffff) != 0x8000
#error KERNEL_RAM_ADDR must start at 0xXXXX8000
#endif
.globl swapper_pg_dir
.equ swapper_pg_dir, TEXTADDR - 0x4000
.equ swapper_pg_dir, KERNEL_RAM_ADDR - 0x4000
.macro pgtbl, rd, phys
adr \rd, stext
sub \rd, \rd, #0x4000
.macro pgtbl, rd
ldr \rd, =(__virt_to_phys(KERNEL_RAM_ADDR - 0x4000))
.endm
#ifdef CONFIG_XIP_KERNEL
#define TEXTADDR XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
#else
/*
* XIP Kernel:
*
* We place the page tables 16K below DATAADDR. Therefore, we must make sure
* that DATAADDR is correctly set. Currently, we expect the least significant
* 16 bits to be 0x8000, but we could probably relax this restriction to
* DATAADDR >= PAGE_OFFSET + 0x4000
*
* Note that pgtbl is meant to return the physical address of swapper_pg_dir.
* We can't make it relative to the kernel position in this case since
* the kernel can physically be anywhere.
*/
#if (DATAADDR & 0xffff) != 0x8000
#error DATAADDR must start at 0xXXXX8000
#endif
.globl swapper_pg_dir
.equ swapper_pg_dir, DATAADDR - 0x4000
.macro pgtbl, rd, phys
ldr \rd, =((DATAADDR - 0x4000) - VIRT_OFFSET)
add \rd, \rd, \phys
.endm
#define TEXTADDR KERNEL_RAM_ADDR
#endif
/*
@ -279,7 +256,7 @@ __turn_mmu_on:
.type __create_page_tables, %function
__create_page_tables:
ldr r5, [r8, #MACHINFO_PHYSRAM] @ physram
pgtbl r4, r5 @ page table address
pgtbl r4 @ page table address
/*
* Clear the 16K level 1 swapper page table
@ -324,7 +301,7 @@ __create_page_tables:
/*
* Then map first 1MB of ram in case it contains our boot params.
*/
add r0, r4, #VIRT_OFFSET >> 18
add r0, r4, #PAGE_OFFSET >> 18
orr r6, r5, r7
str r6, [r0]

31
arch/arm/kernel/irq.c
View File

@ -1050,3 +1050,34 @@ static int __init noirqdebug_setup(char *str)
}
__setup("noirqdebug", noirqdebug_setup);
#ifdef CONFIG_HOTPLUG_CPU
/*
* The CPU has been marked offline. Migrate IRQs off this CPU. If
* the affinity settings do not allow other CPUs, force them onto any
* available CPU.
*/
void migrate_irqs(void)
{
unsigned int i, cpu = smp_processor_id();
for (i = 0; i < NR_IRQS; i++) {
struct irqdesc *desc = irq_desc + i;
if (desc->cpu == cpu) {
unsigned int newcpu = any_online_cpu(desc->affinity);
if (newcpu == NR_CPUS) {
if (printk_ratelimit())
printk(KERN_INFO "IRQ%u no longer affine to CPU%u\n",
i, cpu);
cpus_setall(desc->affinity);
newcpu = any_online_cpu(desc->affinity);
}
route_irq(desc, i, newcpu);
}
}
}
#endif /* CONFIG_HOTPLUG_CPU */

1
arch/arm/kernel/module.c
View File

@ -11,6 +11,7 @@
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/moduleloader.h>
#include <linux/kernel.h>
#include <linux/elf.h>
#include <linux/vmalloc.h>

9
arch/arm/kernel/process.c
View File

@ -26,6 +26,7 @@
#include <linux/interrupt.h>
#include <linux/kallsyms.h>
#include <linux/init.h>
#include <linux/cpu.h>
#include <asm/system.h>
#include <asm/io.h>
@ -105,6 +106,14 @@ void cpu_idle(void)
/* endless idle loop with no priority at all */
while (1) {
void (*idle)(void) = pm_idle;
#ifdef CONFIG_HOTPLUG_CPU
if (cpu_is_offline(smp_processor_id())) {
leds_event(led_idle_start);
cpu_die();
}
#endif
if (!idle)
idle = default_idle;
preempt_disable();

2
arch/arm/kernel/ptrace.c
View File

@ -782,7 +782,7 @@ static int do_ptrace(int request, struct task_struct *child, long addr, long dat
return ret;
}
asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
{
struct task_struct *child;
int ret;

96
arch/arm/kernel/signal.c
View File

@ -139,93 +139,33 @@ struct iwmmxt_sigframe {
unsigned long storage[0x98/4];
};
static int page_present(struct mm_struct *mm, void __user *uptr, int wr)
{
unsigned long addr = (unsigned long)uptr;
pgd_t *pgd = pgd_offset(mm, addr);
if (pgd_present(*pgd)) {
pmd_t *pmd = pmd_offset(pgd, addr);
if (pmd_present(*pmd)) {
pte_t *pte = pte_offset_map(pmd, addr);
return (pte_present(*pte) && (!wr || pte_write(*pte)));
}
}
return 0;
}
static int copy_locked(void __user *uptr, void *kptr, size_t size, int write,
void (*copyfn)(void *, void __user *))
{
unsigned char v, __user *userptr = uptr;
int err = 0;
do {
struct mm_struct *mm;
if (write) {
__put_user_error(0, userptr, err);
__put_user_error(0, userptr + size - 1, err);
} else {
__get_user_error(v, userptr, err);
__get_user_error(v, userptr + size - 1, err);
}
if (err)
break;
mm = current->mm;
spin_lock(&mm->page_table_lock);
if (page_present(mm, userptr, write) &&
page_present(mm, userptr + size - 1, write)) {
copyfn(kptr, uptr);
} else
err = 1;
spin_unlock(&mm->page_table_lock);
} while (err);
return err;
}
static int preserve_iwmmxt_context(struct iwmmxt_sigframe *frame)
{
int err = 0;
char kbuf[sizeof(*frame) + 8];
struct iwmmxt_sigframe *kframe;
/* the iWMMXt context must be 64 bit aligned */
WARN_ON((unsigned long)frame & 7);
__put_user_error(IWMMXT_MAGIC0, &frame->magic0, err);
__put_user_error(IWMMXT_MAGIC1, &frame->magic1, err);
/*
* iwmmxt_task_copy() doesn't check user permissions.
* Let's do a dummy write on the upper boundary to ensure
* access to user mem is OK all way up.
*/
err |= copy_locked(&frame->storage, current_thread_info(),
sizeof(frame->storage), 1, iwmmxt_task_copy);
return err;
kframe = (struct iwmmxt_sigframe *)((unsigned long)(kbuf + 8) & ~7);
kframe->magic0 = IWMMXT_MAGIC0;
kframe->magic1 = IWMMXT_MAGIC1;
iwmmxt_task_copy(current_thread_info(), &kframe->storage);
return __copy_to_user(frame, kframe, sizeof(*frame));
}
static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame)
{
unsigned long magic0, magic1;
int err = 0;
char kbuf[sizeof(*frame) + 8];
struct iwmmxt_sigframe *kframe;
/* the iWMMXt context is 64 bit aligned */
WARN_ON((unsigned long)frame & 7);
/*
* Validate iWMMXt context signature.
* Also, iwmmxt_task_restore() doesn't check user permissions.
* Let's do a dummy write on the upper boundary to ensure
* access to user mem is OK all way up.
*/
__get_user_error(magic0, &frame->magic0, err);
__get_user_error(magic1, &frame->magic1, err);
if (!err && magic0 == IWMMXT_MAGIC0 && magic1 == IWMMXT_MAGIC1)
err = copy_locked(&frame->storage, current_thread_info(),
sizeof(frame->storage), 0, iwmmxt_task_restore);
return err;
/* the iWMMXt context must be 64 bit aligned */
kframe = (struct iwmmxt_sigframe *)((unsigned long)(kbuf + 8) & ~7);
if (__copy_from_user(kframe, frame, sizeof(*frame)))
return -1;
if (kframe->magic0 != IWMMXT_MAGIC0 ||
kframe->magic1 != IWMMXT_MAGIC1)
return -1;
iwmmxt_task_restore(current_thread_info(), &kframe->storage);
return 0;
}
#endif

109
arch/arm/kernel/smp.c
View File

@ -80,19 +80,23 @@ static DEFINE_SPINLOCK(smp_call_function_lock);
int __cpuinit __cpu_up(unsigned int cpu)
{
struct task_struct *idle;
struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu);
struct task_struct *idle = ci->idle;
pgd_t *pgd;
pmd_t *pmd;
int ret;
/*
* Spawn a new process manually. Grab a pointer to
* its task struct so we can mess with it
* Spawn a new process manually, if not already done.
* Grab a pointer to its task struct so we can mess with it
*/
idle = fork_idle(cpu);
if (IS_ERR(idle)) {
printk(KERN_ERR "CPU%u: fork() failed\n", cpu);
return PTR_ERR(idle);
if (!idle) {
idle = fork_idle(cpu);
if (IS_ERR(idle)) {
printk(KERN_ERR "CPU%u: fork() failed\n", cpu);
return PTR_ERR(idle);
}
ci->idle = idle;
}
/*
@ -155,6 +159,91 @@ int __cpuinit __cpu_up(unsigned int cpu)
return ret;
}
#ifdef CONFIG_HOTPLUG_CPU
/*
* __cpu_disable runs on the processor to be shutdown.
*/
int __cpuexit __cpu_disable(void)
{
unsigned int cpu = smp_processor_id();
struct task_struct *p;
int ret;
ret = mach_cpu_disable(cpu);
if (ret)
return ret;
/*
* Take this CPU offline. Once we clear this, we can't return,
* and we must not schedule until we're ready to give up the cpu.
*/
cpu_clear(cpu, cpu_online_map);
/*
* OK - migrate IRQs away from this CPU
*/
migrate_irqs();
/*
* Flush user cache and TLB mappings, and then remove this CPU
* from the vm mask set of all processes.
*/
flush_cache_all();
local_flush_tlb_all();
read_lock(&tasklist_lock);
for_each_process(p) {
if (p->mm)
cpu_clear(cpu, p->mm->cpu_vm_mask);
}
read_unlock(&tasklist_lock);
return 0;
}
/*
* called on the thread which is asking for a CPU to be shutdown -
* waits until shutdown has completed, or it is timed out.
*/
void __cpuexit __cpu_die(unsigned int cpu)
{
if (!platform_cpu_kill(cpu))
printk("CPU%u: unable to kill\n", cpu);
}
/*
* Called from the idle thread for the CPU which has been shutdown.
*
* Note that we disable IRQs here, but do not re-enable them
* before returning to the caller. This is also the behaviour
* of the other hotplug-cpu capable cores, so presumably coming
* out of idle fixes this.
*/
void __cpuexit cpu_die(void)
{
unsigned int cpu = smp_processor_id();
local_irq_disable();
idle_task_exit();
/*
* actual CPU shutdown procedure is at least platform (if not
* CPU) specific
*/
platform_cpu_die(cpu);
/*
* Do not return to the idle loop - jump back to the secondary
* cpu initialisation. There's some initialisation which needs
* to be repeated to undo the effects of taking the CPU offline.
*/
__asm__("mov sp, %0\n"
" b secondary_start_kernel"
:
: "r" ((void *)current->thread_info + THREAD_SIZE - 8));
}
#endif /* CONFIG_HOTPLUG_CPU */
/*
* This is the secondary CPU boot entry. We're using this CPUs
* idle thread stack, but a set of temporary page tables.
@ -236,6 +325,8 @@ void __init smp_prepare_boot_cpu(void)
{
unsigned int cpu = smp_processor_id();
per_cpu(cpu_data, cpu).idle = current;
cpu_set(cpu, cpu_possible_map);
cpu_set(cpu, cpu_present_map);
cpu_set(cpu, cpu_online_map);
@ -309,8 +400,8 @@ int smp_call_function_on_cpu(void (*func)(void *info), void *info, int retry,
printk(KERN_CRIT
"CPU%u: smp_call_function timeout for %p(%p)\n"
" callmap %lx pending %lx, %swait\n",
smp_processor_id(), func, info, callmap, data.pending,
wait ? "" : "no ");
smp_processor_id(), func, info, *cpus_addr(callmap),
*cpus_addr(data.pending), wait ? "" : "no ");
/*
* TRACE

4
arch/arm/kernel/time.c
View File

@ -36,10 +36,6 @@
#include <asm/thread_info.h>
#include <asm/mach/time.h>
u64 jiffies_64 = INITIAL_JIFFIES;
EXPORT_SYMBOL(jiffies_64);
/*
* Our system timer.
*/

47
arch/arm/kernel/traps.c
View File

@ -198,25 +198,16 @@ void show_stack(struct task_struct *tsk, unsigned long *sp)
barrier();
}
DEFINE_SPINLOCK(die_lock);
/*
* This function is protected against re-entrancy.
*/
NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
static void __die(const char *str, int err, struct thread_info *thread, struct pt_regs *regs)
{
struct task_struct *tsk = current;
struct task_struct *tsk = thread->task;
static int die_counter;
console_verbose();
spin_lock_irq(&die_lock);
bust_spinlocks(1);
printk("Internal error: %s: %x [#%d]\n", str, err, ++die_counter);
print_modules();
__show_regs(regs);
printk("Process %s (pid: %d, stack limit = 0x%p)\n",
tsk->comm, tsk->pid, tsk->thread_info + 1);
tsk->comm, tsk->pid, thread + 1);
if (!user_mode(regs) || in_interrupt()) {
dump_mem("Stack: ", regs->ARM_sp,
@ -224,7 +215,21 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
dump_backtrace(regs, tsk);
dump_instr(regs);
}
}
DEFINE_SPINLOCK(die_lock);
/*
* This function is protected against re-entrancy.
*/
NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
{
struct thread_info *thread = current_thread_info();
console_verbose();
spin_lock_irq(&die_lock);
bust_spinlocks(1);
__die(str, err, thread, regs);
bust_spinlocks(0);
spin_unlock_irq(&die_lock);
do_exit(SIGSEGV);
@ -345,7 +350,9 @@ static int bad_syscall(int n, struct pt_regs *regs)
struct thread_info *thread = current_thread_info();
siginfo_t info;
if (current->personality != PER_LINUX && thread->exec_domain->handler) {
if (current->personality != PER_LINUX &&
current->personality != PER_LINUX_32BIT &&
thread->exec_domain->handler) {
thread->exec_domain->handler(n, regs);
return regs->ARM_r0;
}
@ -481,29 +488,33 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
unsigned long addr = regs->ARM_r2;
struct mm_struct *mm = current->mm;
pgd_t *pgd; pmd_t *pmd; pte_t *pte;
spinlock_t *ptl;
regs->ARM_cpsr &= ~PSR_C_BIT;
spin_lock(&mm->page_table_lock);
down_read(&mm->mmap_sem);
pgd = pgd_offset(mm, addr);
if (!pgd_present(*pgd))
goto bad_access;
pmd = pmd_offset(pgd, addr);
if (!pmd_present(*pmd))
goto bad_access;
pte = pte_offset_map(pmd, addr);
if (!pte_present(*pte) || !pte_write(*pte))
pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
if (!pte_present(*pte) || !pte_write(*pte)) {
pte_unmap_unlock(pte, ptl);
goto bad_access;
}
val = *(unsigned long *)addr;
val -= regs->ARM_r0;
if (val == 0) {
*(unsigned long *)addr = regs->ARM_r1;
regs->ARM_cpsr |= PSR_C_BIT;
}
spin_unlock(&mm->page_table_lock);
pte_unmap_unlock(pte, ptl);
up_read(&mm->mmap_sem);
return val;
bad_access:
spin_unlock(&mm->page_table_lock);
up_read(&mm->mmap_sem);
/* simulate a write access fault */
do_DataAbort(addr, 15 + (1 << 11), regs);
return -1;

11
arch/arm/kernel/vmlinux.lds.S
View File

@ -6,14 +6,23 @@
#include <asm-generic/vmlinux.lds.h>
#include <linux/config.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
OUTPUT_ARCH(arm)
ENTRY(stext)
#ifndef __ARMEB__
jiffies = jiffies_64;
#else
jiffies = jiffies_64 + 4;
#endif
#ifdef CONFIG_XIP_KERNEL
#define TEXTADDR XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
#else
#define TEXTADDR KERNEL_RAM_ADDR
#endif
SECTIONS
{
. = TEXTADDR;
@ -95,7 +104,7 @@ SECTIONS
#ifdef CONFIG_XIP_KERNEL
__data_loc = ALIGN(4); /* location in binary */
. = DATAADDR;
. = KERNEL_RAM_ADDR;
#else
. = ALIGN(THREAD_SIZE);
__data_loc = .;

24
arch/arm/lib/Makefile
View File

@ -7,13 +7,27 @@
lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \
csumpartialcopy.o csumpartialcopyuser.o clearbit.o \
copy_page.o delay.o findbit.o memchr.o memcpy.o \
memset.o memzero.o setbit.o strncpy_from_user.o \
strnlen_user.o strchr.o strrchr.o testchangebit.o \
testclearbit.o testsetbit.o uaccess.o getuser.o \
putuser.o ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
ucmpdi2.o lib1funcs.o div64.o \
memmove.o memset.o memzero.o setbit.o \
strncpy_from_user.o strnlen_user.o \
strchr.o strrchr.o \
testchangebit.o testclearbit.o testsetbit.o \
getuser.o putuser.o clear_user.o \
ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
ucmpdi2.o lib1funcs.o div64.o sha1.o \
io-readsb.o io-writesb.o io-readsl.o io-writesl.o
# the code in uaccess.S is not preemption safe and
# probably faster on ARMv3 only
ifeq ($CONFIG_PREEMPT,y)
lib-y += copy_from_user.o copy_to_user.o
else
ifneq ($(CONFIG_CPU_32v3),y)
lib-y += copy_from_user.o copy_to_user.o
else
lib-y += uaccess.o
endif
endif
ifeq ($(CONFIG_CPU_32v3),y)
lib-y += io-readsw-armv3.o io-writesw-armv3.o
else

48
arch/arm/lib/ashldi3.S Normal file
View File

@ -0,0 +1,48 @@
/* Copyright 1995, 1996, 1998, 1999, 2000, 2003, 2004, 2005
Free Software Foundation, Inc.
This file is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2, or (at your option) any
later version.
In addition to the permissions in the GNU General Public License, the
Free Software Foundation gives you unlimited permission to link the
compiled version of this file into combinations with other programs,
and to distribute those combinations without any restriction coming
from the use of this file. (The General Public License restrictions
do apply in other respects; for example, they cover modification of
the file, and distribution when not linked into a combine
executable.)
This file is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; see the file COPYING. If not, write to
the Free Software Foundation, 51 Franklin Street, Fifth Floor,
Boston, MA 02110-1301, USA. */
#include <linux/linkage.h>
#ifdef __ARMEB__
#define al r1
#define ah r0
#else
#define al r0
#define ah r1
#endif
ENTRY(__ashldi3)
subs r3, r2, #32
rsb ip, r2, #32
movmi ah, ah, lsl r2
movpl ah, al, lsl r3
orrmi ah, ah, al, lsr ip
mov al, al, lsl r2
mov pc, lr

56
arch/arm/lib/ashldi3.c
View File

@ -1,56 +0,0 @@
/* More subroutines needed by GCC output code on some machines. */
/* Compile this one with gcc. */
/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
This file is part of GNU CC.
GNU CC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GNU CC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING. If not, write to
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
/* As a special exception, if you link this library with other files,
some of which are compiled with GCC, to produce an executable,
this library does not by itself cause the resulting executable
to be covered by the GNU General Public License.
This exception does not however invalidate any other reasons why
the executable file might be covered by the GNU General Public License.
*/
/* support functions required by the kernel. based on code from gcc-2.95.3 */
/* I Molton 29/07/01 */
#include "gcclib.h"
s64 __ashldi3(s64 u, int b)
{
DIunion w;
int bm;
DIunion uu;
if (b == 0)
return u;
uu.ll = u;
bm = (sizeof(s32) * BITS_PER_UNIT) - b;
if (bm <= 0) {
w.s.low = 0;
w.s.high = (u32) uu.s.low << -bm;
} else {
u32 carries = (u32) uu.s.low >> bm;
w.s.low = (u32) uu.s.low << b;
w.s.high = ((u32) uu.s.high << b) | carries;
}
return w.ll;
}

48
arch/arm/lib/ashrdi3.S Normal file
View File

@ -0,0 +1,48 @@
/* Copyright 1995, 1996, 1998, 1999, 2000, 2003, 2004, 2005
Free Software Foundation, Inc.
This file is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2, or (at your option) any
later version.
In addition to the permissions in the GNU General Public License, the
Free Software Foundation gives you unlimited permission to link the
compiled version of this file into combinations with other programs,
and to distribute those combinations without any restriction coming
from the use of this file. (The General Public License restrictions
do apply in other respects; for example, they cover modification of
the file, and distribution when not linked into a combine
executable.)
This file is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; see the file COPYING. If not, write to
the Free Software Foundation, 51 Franklin Street, Fifth Floor,
Boston, MA 02110-1301, USA. */
#include <linux/linkage.h>
#ifdef __ARMEB__
#define al r1
#define ah r0
#else
#define al r0
#define ah r1
#endif
ENTRY(__ashrdi3)
subs r3, r2, #32
rsb ip, r2, #32
movmi al, al, lsr r2
movpl al, ah, asr r3
orrmi al, al, ah, lsl ip
mov ah, ah, asr r2
mov pc, lr

57
arch/arm/lib/ashrdi3.c
View File

@ -1,57 +0,0 @@
/* More subroutines needed by GCC output code on some machines. */
/* Compile this one with gcc. */
/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
This file is part of GNU CC.
GNU CC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GNU CC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING. If not, write to
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
/* As a special exception, if you link this library with other files,
some of which are compiled with GCC, to produce an executable,
this library does not by itself cause the resulting executable
to be covered by the GNU General Public License.
This exception does not however invalidate any other reasons why
the executable file might be covered by the GNU General Public License.
*/
/* support functions required by the kernel. based on code from gcc-2.95.3 */
/* I Molton 29/07/01 */
#include "gcclib.h"
s64 __ashrdi3(s64 u, int b)
{
DIunion w;
int bm;
DIunion uu;
if (b == 0)
return u;
uu.ll = u;
bm = (sizeof(s32) * BITS_PER_UNIT) - b;
if (bm <= 0) {
/* w.s.high = 1..1 or 0..0 */
w.s.high = uu.s.high >> (sizeof(s32) * BITS_PER_UNIT - 1);
w.s.low = uu.s.high >> -bm;
} else {
u32 carries = (u32) uu.s.high << bm;
w.s.high = uu.s.high >> b;
w.s.low = ((u32) uu.s.low >> b) | carries;
}
return w.ll;
}

2
arch/arm/lib/bitops.h
View File

@ -1,6 +1,6 @@
#include <linux/config.h>
#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_MPCORE)
#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_32v6K)
.macro bitop, instr
mov r2, #1
and r3, r0, #7 @ Get bit offset

52
arch/arm/lib/clear_user.S Normal file
View File

@ -0,0 +1,52 @@
/*
* linux/arch/arm/lib/clear_user.S
*
* Copyright (C) 1995, 1996,1997,1998 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
.text
/* Prototype: int __arch_clear_user(void *addr, size_t sz)
* Purpose : clear some user memory
* Params : addr - user memory address to clear
* : sz - number of bytes to clear
* Returns : number of bytes NOT cleared
*/
ENTRY(__arch_clear_user)
stmfd sp!, {r1, lr}
mov r2, #0
cmp r1, #4
blt 2f
ands ip, r0, #3
beq 1f
cmp ip, #2
USER( strbt r2, [r0], #1)
USER( strlebt r2, [r0], #1)
USER( strltbt r2, [r0], #1)
rsb ip, ip, #4
sub r1, r1, ip @ 7 6 5 4 3 2 1
1: subs r1, r1, #8 @ -1 -2 -3 -4 -5 -6 -7
USER( strplt r2, [r0], #4)
USER( strplt r2, [r0], #4)
bpl 1b
adds r1, r1, #4 @ 3 2 1 0 -1 -2 -3
USER( strplt r2, [r0], #4)
2: tst r1, #2 @ 1x 1x 0x 0x 1x 1x 0x
USER( strnebt r2, [r0], #1)
USER( strnebt r2, [r0], #1)
tst r1, #1 @ x1 x0 x1 x0 x1 x0 x1
USER( strnebt r2, [r0], #1)
mov r0, #0
LOADREGS(fd,sp!, {r1, pc})
.section .fixup,"ax"
.align 0
9001: LOADREGS(fd,sp!, {r0, pc})
.previous

101
arch/arm/lib/copy_from_user.S Normal file
View File

@ -0,0 +1,101 @@
/*
* linux/arch/arm/lib/copy_from_user.S
*
* Author: Nicolas Pitre
* Created: Sep 29, 2005
* Copyright: MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
/*
* Prototype:
*
* size_t __arch_copy_from_user(void *to, const void *from, size_t n)
*
* Purpose:
*
* copy a block to kernel memory from user memory
*
* Params:
*
* to = kernel memory
* from = user memory
* n = number of bytes to copy
*
* Return value:
*
* Number of bytes NOT copied.
*/
.macro ldr1w ptr reg abort
100: ldrt \reg, [\ptr], #4
.section __ex_table, "a"
.long 100b, \abort
.previous
.endm
.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
ldr1w \ptr, \reg1, \abort
ldr1w \ptr, \reg2, \abort
ldr1w \ptr, \reg3, \abort
ldr1w \ptr, \reg4, \abort
.endm
.macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
ldr4w \ptr, \reg1, \reg2, \reg3, \reg4, \abort
ldr4w \ptr, \reg5, \reg6, \reg7, \reg8, \abort
.endm
.macro ldr1b ptr reg cond=al abort
100: ldr\cond\()bt \reg, [\ptr], #1
.section __ex_table, "a"
.long 100b, \abort
.previous
.endm
.macro str1w ptr reg abort
str \reg, [\ptr], #4
.endm
.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
stmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8}
.endm
.macro str1b ptr reg cond=al abort
str\cond\()b \reg, [\ptr], #1
.endm
.macro enter reg1 reg2
mov r3, #0
stmdb sp!, {r0, r2, r3, \reg1, \reg2}
.endm
.macro exit reg1 reg2
add sp, sp, #8
ldmfd sp!, {r0, \reg1, \reg2}
.endm
.text
ENTRY(__arch_copy_from_user)
#include "copy_template.S"
.section .fixup,"ax"
.align 0
copy_abort_preamble
ldmfd sp!, {r1, r2}
sub r3, r0, r1
rsb r1, r3, r2
str r1, [sp]
bl __memzero
ldr r0, [sp], #4
copy_abort_end
.previous

255
arch/arm/lib/copy_template.S Normal file
View File

@ -0,0 +1,255 @@
/*
* linux/arch/arm/lib/copy_template.s
*
* Code template for optimized memory copy functions
*
* Author: Nicolas Pitre
* Created: Sep 28, 2005
* Copyright: MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* This can be used to enable code to cacheline align the source pointer.
* Experiments on tested architectures (StrongARM and XScale) didn't show
* this a worthwhile thing to do. That might be different in the future.
*/
//#define CALGN(code...) code
#define CALGN(code...)
/*
* Theory of operation
* -------------------
*
* This file provides the core code for a forward memory copy used in
* the implementation of memcopy(), copy_to_user() and copy_from_user().
*
* The including file must define the following accessor macros
* according to the need of the given function:
*
* ldr1w ptr reg abort
*
* This loads one word from 'ptr', stores it in 'reg' and increments
* 'ptr' to the next word. The 'abort' argument is used for fixup tables.
*
* ldr4w ptr reg1 reg2 reg3 reg4 abort
* ldr8w ptr, reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
*
* This loads four or eight words starting from 'ptr', stores them
* in provided registers and increments 'ptr' past those words.
* The'abort' argument is used for fixup tables.
*
* ldr1b ptr reg cond abort
*
* Similar to ldr1w, but it loads a byte and increments 'ptr' one byte.
* It also must apply the condition code if provided, otherwise the
* "al" condition is assumed by default.
*
* str1w ptr reg abort
* str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
* str1b ptr reg cond abort
*
* Same as their ldr* counterparts, but data is stored to 'ptr' location
* rather than being loaded.
*
* enter reg1 reg2
*
* Preserve the provided registers on the stack plus any additional
* data as needed by the implementation including this code. Called
* upon code entry.
*
* exit reg1 reg2
*
* Restore registers with the values previously saved with the
* 'preserv' macro. Called upon code termination.
*/
enter r4, lr
subs r2, r2, #4
blt 8f
ands ip, r0, #3
PLD( pld [r1, #0] )
bne 9f
ands ip, r1, #3
bne 10f
1: subs r2, r2, #(28)
stmfd sp!, {r5 - r8}
blt 5f
CALGN( ands ip, r1, #31 )
CALGN( rsb r3, ip, #32 )
CALGN( sbcnes r4, r3, r2 ) @ C is always set here
CALGN( bcs 2f )
CALGN( adr r4, 6f )
CALGN( subs r2, r2, r3 ) @ C gets set
CALGN( add pc, r4, ip )
PLD( pld [r1, #0] )
2: PLD( subs r2, r2, #96 )
PLD( pld [r1, #28] )
PLD( blt 4f )
PLD( pld [r1, #60] )
PLD( pld [r1, #92] )
3: PLD( pld [r1, #124] )
4: ldr8w r1, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f
subs r2, r2, #32
str8w r0, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f
bge 3b
PLD( cmn r2, #96 )
PLD( bge 4b )
5: ands ip, r2, #28
rsb ip, ip, #32
addne pc, pc, ip @ C is always clear here
b 7f
6: nop
ldr1w r1, r3, abort=20f
ldr1w r1, r4, abort=20f
ldr1w r1, r5, abort=20f
ldr1w r1, r6, abort=20f
ldr1w r1, r7, abort=20f
ldr1w r1, r8, abort=20f
ldr1w r1, lr, abort=20f
add pc, pc, ip
nop
nop
str1w r0, r3, abort=20f
str1w r0, r4, abort=20f
str1w r0, r5, abort=20f
str1w r0, r6, abort=20f
str1w r0, r7, abort=20f
str1w r0, r8, abort=20f
str1w r0, lr, abort=20f
CALGN( bcs 2b )
7: ldmfd sp!, {r5 - r8}
8: movs r2, r2, lsl #31
ldr1b r1, r3, ne, abort=21f
ldr1b r1, r4, cs, abort=21f
ldr1b r1, ip, cs, abort=21f
str1b r0, r3, ne, abort=21f
str1b r0, r4, cs, abort=21f
str1b r0, ip, cs, abort=21f
exit r4, pc
9: rsb ip, ip, #4
cmp ip, #2
ldr1b r1, r3, gt, abort=21f
ldr1b r1, r4, ge, abort=21f
ldr1b r1, lr, abort=21f
str1b r0, r3, gt, abort=21f
str1b r0, r4, ge, abort=21f
subs r2, r2, ip
str1b r0, lr, abort=21f
blt 8b
ands ip, r1, #3
beq 1b
10: bic r1, r1, #3
cmp ip, #2
ldr1w r1, lr, abort=21f
beq 17f
bgt 18f
.macro forward_copy_shift pull push
subs r2, r2, #28
blt 14f
CALGN( ands ip, r1, #31 )
CALGN( rsb ip, ip, #32 )
CALGN( sbcnes r4, ip, r2 ) @ C is always set here
CALGN( subcc r2, r2, ip )
CALGN( bcc 15f )
11: stmfd sp!, {r5 - r9}
PLD( pld [r1, #0] )
PLD( subs r2, r2, #96 )
PLD( pld [r1, #28] )
PLD( blt 13f )
PLD( pld [r1, #60] )
PLD( pld [r1, #92] )
12: PLD( pld [r1, #124] )
13: ldr4w r1, r4, r5, r6, r7, abort=19f
mov r3, lr, pull #\pull
subs r2, r2, #32
ldr4w r1, r8, r9, ip, lr, abort=19f
orr r3, r3, r4, push #\push
mov r4, r4, pull #\pull
orr r4, r4, r5, push #\push
mov r5, r5, pull #\pull
orr r5, r5, r6, push #\push
mov r6, r6, pull #\pull
orr r6, r6, r7, push #\push
mov r7, r7, pull #\pull
orr r7, r7, r8, push #\push
mov r8, r8, pull #\pull
orr r8, r8, r9, push #\push
mov r9, r9, pull #\pull
orr r9, r9, ip, push #\push
mov ip, ip, pull #\pull
orr ip, ip, lr, push #\push
str8w r0, r3, r4, r5, r6, r7, r8, r9, ip, , abort=19f
bge 12b
PLD( cmn r2, #96 )
PLD( bge 13b )
ldmfd sp!, {r5 - r9}
14: ands ip, r2, #28
beq 16f
15: mov r3, lr, pull #\pull
ldr1w r1, lr, abort=21f
subs ip, ip, #4
orr r3, r3, lr, push #\push
str1w r0, r3, abort=21f
bgt 15b
CALGN( cmp r2, #0 )
CALGN( bge 11b )
16: sub r1, r1, #(\push / 8)
b 8b
.endm
forward_copy_shift pull=8 push=24
17: forward_copy_shift pull=16 push=16
18: forward_copy_shift pull=24 push=8
/*
* Abort preanble and completion macros.
* If a fixup handler is required then those macros must surround it.
* It is assumed that the fixup code will handle the private part of
* the exit macro.
*/
.macro copy_abort_preamble
19: ldmfd sp!, {r5 - r9}
b 21f
20: ldmfd sp!, {r5 - r8}
21:
.endm
.macro copy_abort_end
ldmfd sp!, {r4, pc}
.endm

101
arch/arm/lib/copy_to_user.S Normal file
View File

@ -0,0 +1,101 @@
/*
* linux/arch/arm/lib/copy_to_user.S
*
* Author: Nicolas Pitre
* Created: Sep 29, 2005
* Copyright: MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
/*
* Prototype:
*
* size_t __arch_copy_to_user(void *to, const void *from, size_t n)
*
* Purpose:
*
* copy a block to user memory from kernel memory
*
* Params:
*
* to = user memory
* from = kernel memory
* n = number of bytes to copy
*
* Return value:
*
* Number of bytes NOT copied.
*/
.macro ldr1w ptr reg abort
ldr \reg, [\ptr], #4
.endm
.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4}
.endm
.macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8}
.endm
.macro ldr1b ptr reg cond=al abort
ldr\cond\()b \reg, [\ptr], #1
.endm
.macro str1w ptr reg abort
100: strt \reg, [\ptr], #4
.section __ex_table, "a"
.long 100b, \abort
.previous
.endm
.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
str1w \ptr, \reg1, \abort
str1w \ptr, \reg2, \abort
str1w \ptr, \reg3, \abort
str1w \ptr, \reg4, \abort
str1w \ptr, \reg5, \abort
str1w \ptr, \reg6, \abort
str1w \ptr, \reg7, \abort
str1w \ptr, \reg8, \abort
.endm
.macro str1b ptr reg cond=al abort
100: str\cond\()bt \reg, [\ptr], #1
.section __ex_table, "a"
.long 100b, \abort
.previous
.endm
.macro enter reg1 reg2
mov r3, #0
stmdb sp!, {r0, r2, r3, \reg1, \reg2}
.endm
.macro exit reg1 reg2
add sp, sp, #8
ldmfd sp!, {r0, \reg1, \reg2}
.endm
.text
ENTRY(__arch_copy_to_user)
#include "copy_template.S"
.section .fixup,"ax"
.align 0
copy_abort_preamble
ldmfd sp!, {r1, r2, r3}
sub r0, r0, r1
rsb r0, r0, r2
copy_abort_end
.previous

22
arch/arm/lib/gcclib.h
View File

@ -1,22 +0,0 @@
/* gcclib.h -- definitions for various functions 'borrowed' from gcc-2.95.3 */
/* I Molton 29/07/01 */
#include <linux/types.h>
#define BITS_PER_UNIT 8
#define SI_TYPE_SIZE (sizeof(s32) * BITS_PER_UNIT)
#ifdef __ARMEB__
struct DIstruct {
s32 high, low;
};
#else
struct DIstruct {
s32 low, high;
};
#endif
typedef union {
struct DIstruct s;
s64 ll;
} DIunion;

48
arch/arm/lib/lshrdi3.S Normal file
View File

@ -0,0 +1,48 @@
/* Copyright 1995, 1996, 1998, 1999, 2000, 2003, 2004, 2005
Free Software Foundation, Inc.
This file is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2, or (at your option) any
later version.
In addition to the permissions in the GNU General Public License, the
Free Software Foundation gives you unlimited permission to link the
compiled version of this file into combinations with other programs,
and to distribute those combinations without any restriction coming
from the use of this file. (The General Public License restrictions
do apply in other respects; for example, they cover modification of
the file, and distribution when not linked into a combine
executable.)
This file is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; see the file COPYING. If not, write to
the Free Software Foundation, 51 Franklin Street, Fifth Floor,
Boston, MA 02110-1301, USA. */
#include <linux/linkage.h>
#ifdef __ARMEB__
#define al r1
#define ah r0
#else
#define al r0
#define ah r1
#endif
ENTRY(__lshrdi3)
subs r3, r2, #32
rsb ip, r2, #32
movmi al, al, lsr r2
movpl al, ah, lsr r3
orrmi al, al, ah, lsl ip
mov ah, ah, lsr r2
mov pc, lr

56
arch/arm/lib/lshrdi3.c
View File

@ -1,56 +0,0 @@
/* More subroutines needed by GCC output code on some machines. */
/* Compile this one with gcc. */
/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
This file is part of GNU CC.
GNU CC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GNU CC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING. If not, write to
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
/* As a special exception, if you link this library with other files,
some of which are compiled with GCC, to produce an executable,
this library does not by itself cause the resulting executable
to be covered by the GNU General Public License.
This exception does not however invalidate any other reasons why
the executable file might be covered by the GNU General Public License.
*/
/* support functions required by the kernel. based on code from gcc-2.95.3 */
/* I Molton 29/07/01 */
#include "gcclib.h"
s64 __lshrdi3(s64 u, int b)
{
DIunion w;
int bm;
DIunion uu;
if (b == 0)
return u;
uu.ll = u;
bm = (sizeof(s32) * BITS_PER_UNIT) - b;
if (bm <= 0) {
w.s.high = 0;
w.s.low = (u32) uu.s.high >> -bm;
} else {
u32 carries = (u32) uu.s.high << bm;
w.s.high = (u32) uu.s.high >> b;
w.s.low = ((u32) uu.s.low >> b) | carries;
}
return w.ll;
}

422
arch/arm/lib/memcpy.S
View File

@ -1,393 +1,59 @@
/*
* linux/arch/arm/lib/memcpy.S
*
* Copyright (C) 1995-1999 Russell King
* Author: Nicolas Pitre
* Created: Sep 28, 2005
* Copyright: MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* ASM optimised string functions
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
.text
.macro ldr1w ptr reg abort
ldr \reg, [\ptr], #4
.endm
#define ENTER \
mov ip,sp ;\
stmfd sp!,{r0,r4-r9,fp,ip,lr,pc} ;\
sub fp,ip,#4
.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4}
.endm
#define EXIT \
LOADREGS(ea, fp, {r0, r4 - r9, fp, sp, pc})
.macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8}
.endm
#define EXITEQ \
LOADREGS(eqea, fp, {r0, r4 - r9, fp, sp, pc})
.macro ldr1b ptr reg cond=al abort
ldr\cond\()b \reg, [\ptr], #1
.endm
.macro str1w ptr reg abort
str \reg, [\ptr], #4
.endm
.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
stmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8}
.endm
.macro str1b ptr reg cond=al abort
str\cond\()b \reg, [\ptr], #1
.endm
.macro enter reg1 reg2
stmdb sp!, {r0, \reg1, \reg2}
.endm
.macro exit reg1 reg2
ldmfd sp!, {r0, \reg1, \reg2}
.endm
.text
/* Prototype: void *memcpy(void *dest, const void *src, size_t n); */
/*
* Prototype: void memcpy(void *to,const void *from,unsigned long n);
*/
ENTRY(memcpy)
ENTRY(memmove)
ENTER
cmp r1, r0
bcc 23f
subs r2, r2, #4
blt 6f
PLD( pld [r1, #0] )
ands ip, r0, #3
bne 7f
ands ip, r1, #3
bne 8f
1: subs r2, r2, #8
blt 5f
subs r2, r2, #20
blt 4f
PLD( pld [r1, #28] )
PLD( subs r2, r2, #64 )
PLD( blt 3f )
2: PLD( pld [r1, #60] )
PLD( pld [r1, #92] )
ldmia r1!, {r3 - r9, ip}
subs r2, r2, #32
stmgeia r0!, {r3 - r9, ip}
ldmgeia r1!, {r3 - r9, ip}
subges r2, r2, #32
stmia r0!, {r3 - r9, ip}
bge 2b
3: PLD( ldmia r1!, {r3 - r9, ip} )
PLD( adds r2, r2, #32 )
PLD( stmgeia r0!, {r3 - r9, ip} )
PLD( ldmgeia r1!, {r3 - r9, ip} )
PLD( subges r2, r2, #32 )
PLD( stmia r0!, {r3 - r9, ip} )
4: cmn r2, #16
ldmgeia r1!, {r3 - r6}
subge r2, r2, #16
stmgeia r0!, {r3 - r6}
adds r2, r2, #20
ldmgeia r1!, {r3 - r5}
subge r2, r2, #12
stmgeia r0!, {r3 - r5}
5: adds r2, r2, #8
blt 6f
subs r2, r2, #4
ldrlt r3, [r1], #4
ldmgeia r1!, {r4, r5}
subge r2, r2, #4
strlt r3, [r0], #4
stmgeia r0!, {r4, r5}
6: adds r2, r2, #4
EXITEQ
cmp r2, #2
ldrb r3, [r1], #1
ldrgeb r4, [r1], #1
ldrgtb r5, [r1], #1
strb r3, [r0], #1
strgeb r4, [r0], #1
strgtb r5, [r0], #1
EXIT
7: rsb ip, ip, #4
cmp ip, #2
ldrb r3, [r1], #1
ldrgeb r4, [r1], #1
ldrgtb r5, [r1], #1
strb r3, [r0], #1
strgeb r4, [r0], #1
strgtb r5, [r0], #1
subs r2, r2, ip
blt 6b
ands ip, r1, #3
beq 1b
8: bic r1, r1, #3
ldr r7, [r1], #4
cmp ip, #2
bgt 18f
beq 13f
cmp r2, #12
blt 11f
PLD( pld [r1, #12] )
sub r2, r2, #12
PLD( subs r2, r2, #32 )
PLD( blt 10f )
PLD( pld [r1, #28] )
9: PLD( pld [r1, #44] )
10: mov r3, r7, pull #8
ldmia r1!, {r4 - r7}
subs r2, r2, #16
orr r3, r3, r4, push #24
mov r4, r4, pull #8
orr r4, r4, r5, push #24
mov r5, r5, pull #8
orr r5, r5, r6, push #24
mov r6, r6, pull #8
orr r6, r6, r7, push #24
stmia r0!, {r3 - r6}
bge 9b
PLD( cmn r2, #32 )
PLD( bge 10b )
PLD( add r2, r2, #32 )
adds r2, r2, #12
blt 12f
11: mov r3, r7, pull #8
ldr r7, [r1], #4
subs r2, r2, #4
orr r3, r3, r7, push #24
str r3, [r0], #4
bge 11b
12: sub r1, r1, #3
b 6b
13: cmp r2, #12
blt 16f
PLD( pld [r1, #12] )
sub r2, r2, #12
PLD( subs r2, r2, #32 )
PLD( blt 15f )
PLD( pld [r1, #28] )
14: PLD( pld [r1, #44] )
15: mov r3, r7, pull #16
ldmia r1!, {r4 - r7}
subs r2, r2, #16
orr r3, r3, r4, push #16
mov r4, r4, pull #16
orr r4, r4, r5, push #16
mov r5, r5, pull #16
orr r5, r5, r6, push #16
mov r6, r6, pull #16
orr r6, r6, r7, push #16
stmia r0!, {r3 - r6}
bge 14b
PLD( cmn r2, #32 )
PLD( bge 15b )
PLD( add r2, r2, #32 )
adds r2, r2, #12
blt 17f
16: mov r3, r7, pull #16
ldr r7, [r1], #4
subs r2, r2, #4
orr r3, r3, r7, push #16
str r3, [r0], #4
bge 16b
17: sub r1, r1, #2
b 6b
18: cmp r2, #12
blt 21f
PLD( pld [r1, #12] )
sub r2, r2, #12
PLD( subs r2, r2, #32 )
PLD( blt 20f )
PLD( pld [r1, #28] )
19: PLD( pld [r1, #44] )
20: mov r3, r7, pull #24
ldmia r1!, {r4 - r7}
subs r2, r2, #16
orr r3, r3, r4, push #8
mov r4, r4, pull #24
orr r4, r4, r5, push #8
mov r5, r5, pull #24
orr r5, r5, r6, push #8
mov r6, r6, pull #24
orr r6, r6, r7, push #8
stmia r0!, {r3 - r6}
bge 19b
PLD( cmn r2, #32 )
PLD( bge 20b )
PLD( add r2, r2, #32 )
adds r2, r2, #12
blt 22f
21: mov r3, r7, pull #24
ldr r7, [r1], #4
subs r2, r2, #4
orr r3, r3, r7, push #8
str r3, [r0], #4
bge 21b
22: sub r1, r1, #1
b 6b
23: add r1, r1, r2
add r0, r0, r2
subs r2, r2, #4
blt 29f
PLD( pld [r1, #-4] )
ands ip, r0, #3
bne 30f
ands ip, r1, #3
bne 31f
24: subs r2, r2, #8
blt 28f
subs r2, r2, #20
blt 27f
PLD( pld [r1, #-32] )
PLD( subs r2, r2, #64 )
PLD( blt 26f )
25: PLD( pld [r1, #-64] )
PLD( pld [r1, #-96] )
ldmdb r1!, {r3 - r9, ip}
subs r2, r2, #32
stmgedb r0!, {r3 - r9, ip}
ldmgedb r1!, {r3 - r9, ip}
subges r2, r2, #32
stmdb r0!, {r3 - r9, ip}
bge 25b
26: PLD( ldmdb r1!, {r3 - r9, ip} )
PLD( adds r2, r2, #32 )
PLD( stmgedb r0!, {r3 - r9, ip} )
PLD( ldmgedb r1!, {r3 - r9, ip} )
PLD( subges r2, r2, #32 )
PLD( stmdb r0!, {r3 - r9, ip} )
27: cmn r2, #16
ldmgedb r1!, {r3 - r6}
subge r2, r2, #16
stmgedb r0!, {r3 - r6}
adds r2, r2, #20
ldmgedb r1!, {r3 - r5}
subge r2, r2, #12
stmgedb r0!, {r3 - r5}
28: adds r2, r2, #8
blt 29f
subs r2, r2, #4
ldrlt r3, [r1, #-4]!
ldmgedb r1!, {r4, r5}
subge r2, r2, #4
strlt r3, [r0, #-4]!
stmgedb r0!, {r4, r5}
29: adds r2, r2, #4
EXITEQ
cmp r2, #2
ldrb r3, [r1, #-1]!
ldrgeb r4, [r1, #-1]!
ldrgtb r5, [r1, #-1]!
strb r3, [r0, #-1]!
strgeb r4, [r0, #-1]!
strgtb r5, [r0, #-1]!
EXIT
30: cmp ip, #2
ldrb r3, [r1, #-1]!
ldrgeb r4, [r1, #-1]!
ldrgtb r5, [r1, #-1]!
strb r3, [r0, #-1]!
strgeb r4, [r0, #-1]!
strgtb r5, [r0, #-1]!
subs r2, r2, ip
blt 29b
ands ip, r1, #3
beq 24b
31: bic r1, r1, #3
ldr r3, [r1], #0
cmp ip, #2
blt 41f
beq 36f
cmp r2, #12
blt 34f
PLD( pld [r1, #-16] )
sub r2, r2, #12
PLD( subs r2, r2, #32 )
PLD( blt 33f )
PLD( pld [r1, #-32] )
32: PLD( pld [r1, #-48] )
33: mov r7, r3, push #8
ldmdb r1!, {r3, r4, r5, r6}
subs r2, r2, #16
orr r7, r7, r6, pull #24
mov r6, r6, push #8
orr r6, r6, r5, pull #24
mov r5, r5, push #8
orr r5, r5, r4, pull #24
mov r4, r4, push #8
orr r4, r4, r3, pull #24
stmdb r0!, {r4, r5, r6, r7}
bge 32b
PLD( cmn r2, #32 )
PLD( bge 33b )
PLD( add r2, r2, #32 )
adds r2, r2, #12
blt 35f
34: mov ip, r3, push #8
ldr r3, [r1, #-4]!
subs r2, r2, #4
orr ip, ip, r3, pull #24
str ip, [r0, #-4]!
bge 34b
35: add r1, r1, #3
b 29b
36: cmp r2, #12
blt 39f
PLD( pld [r1, #-16] )
sub r2, r2, #12
PLD( subs r2, r2, #32 )
PLD( blt 38f )
PLD( pld [r1, #-32] )
37: PLD( pld [r1, #-48] )
38: mov r7, r3, push #16
ldmdb r1!, {r3, r4, r5, r6}
subs r2, r2, #16
orr r7, r7, r6, pull #16
mov r6, r6, push #16
orr r6, r6, r5, pull #16
mov r5, r5, push #16
orr r5, r5, r4, pull #16
mov r4, r4, push #16
orr r4, r4, r3, pull #16
stmdb r0!, {r4, r5, r6, r7}
bge 37b
PLD( cmn r2, #32 )
PLD( bge 38b )
PLD( add r2, r2, #32 )
adds r2, r2, #12
blt 40f
39: mov ip, r3, push #16
ldr r3, [r1, #-4]!
subs r2, r2, #4
orr ip, ip, r3, pull #16
str ip, [r0, #-4]!
bge 39b
40: add r1, r1, #2
b 29b
41: cmp r2, #12
blt 44f
PLD( pld [r1, #-16] )
sub r2, r2, #12
PLD( subs r2, r2, #32 )
PLD( blt 43f )
PLD( pld [r1, #-32] )
42: PLD( pld [r1, #-48] )
43: mov r7, r3, push #24
ldmdb r1!, {r3, r4, r5, r6}
subs r2, r2, #16
orr r7, r7, r6, pull #8
mov r6, r6, push #24
orr r6, r6, r5, pull #8
mov r5, r5, push #24
orr r5, r5, r4, pull #8
mov r4, r4, push #24
orr r4, r4, r3, pull #8
stmdb r0!, {r4, r5, r6, r7}
bge 42b
PLD( cmn r2, #32 )
PLD( bge 43b )
PLD( add r2, r2, #32 )
adds r2, r2, #12
blt 45f
44: mov ip, r3, push #24
ldr r3, [r1, #-4]!
subs r2, r2, #4
orr ip, ip, r3, pull #8
str ip, [r0, #-4]!
bge 44b
45: add r1, r1, #1
b 29b
#include "copy_template.S"

206
arch/arm/lib/memmove.S Normal file
View File

@ -0,0 +1,206 @@
/*
* linux/arch/arm/lib/memmove.S
*
* Author: Nicolas Pitre
* Created: Sep 28, 2005
* Copyright: (C) MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
/*
* This can be used to enable code to cacheline align the source pointer.
* Experiments on tested architectures (StrongARM and XScale) didn't show
* this a worthwhile thing to do. That might be different in the future.
*/
//#define CALGN(code...) code
#define CALGN(code...)
.text
/*
* Prototype: void *memmove(void *dest, const void *src, size_t n);
*
* Note:
*
* If the memory regions don't overlap, we simply branch to memcpy which is
* normally a bit faster. Otherwise the copy is done going downwards. This
* is a transposition of the code from copy_template.S but with the copy
* occurring in the opposite direction.
*/
ENTRY(memmove)
subs ip, r0, r1
cmphi r2, ip
bls memcpy
stmfd sp!, {r0, r4, lr}
add r1, r1, r2
add r0, r0, r2
subs r2, r2, #4
blt 8f
ands ip, r0, #3
PLD( pld [r1, #-4] )
bne 9f
ands ip, r1, #3
bne 10f
1: subs r2, r2, #(28)
stmfd sp!, {r5 - r8}
blt 5f
CALGN( ands ip, r1, #31 )
CALGN( sbcnes r4, ip, r2 ) @ C is always set here
CALGN( bcs 2f )
CALGN( adr r4, 6f )
CALGN( subs r2, r2, ip ) @ C is set here
CALGN( add pc, r4, ip )
PLD( pld [r1, #-4] )
2: PLD( subs r2, r2, #96 )
PLD( pld [r1, #-32] )
PLD( blt 4f )
PLD( pld [r1, #-64] )
PLD( pld [r1, #-96] )
3: PLD( pld [r1, #-128] )
4: ldmdb r1!, {r3, r4, r5, r6, r7, r8, ip, lr}
subs r2, r2, #32
stmdb r0!, {r3, r4, r5, r6, r7, r8, ip, lr}
bge 3b
PLD( cmn r2, #96 )
PLD( bge 4b )
5: ands ip, r2, #28
rsb ip, ip, #32
addne pc, pc, ip @ C is always clear here
b 7f
6: nop
ldr r3, [r1, #-4]!
ldr r4, [r1, #-4]!
ldr r5, [r1, #-4]!
ldr r6, [r1, #-4]!
ldr r7, [r1, #-4]!
ldr r8, [r1, #-4]!
ldr lr, [r1, #-4]!
add pc, pc, ip
nop
nop
str r3, [r0, #-4]!
str r4, [r0, #-4]!
str r5, [r0, #-4]!
str r6, [r0, #-4]!
str r7, [r0, #-4]!
str r8, [r0, #-4]!
str lr, [r0, #-4]!
CALGN( bcs 2b )
7: ldmfd sp!, {r5 - r8}
8: movs r2, r2, lsl #31
ldrneb r3, [r1, #-1]!
ldrcsb r4, [r1, #-1]!
ldrcsb ip, [r1, #-1]
strneb r3, [r0, #-1]!
strcsb r4, [r0, #-1]!
strcsb ip, [r0, #-1]
ldmfd sp!, {r0, r4, pc}
9: cmp ip, #2
ldrgtb r3, [r1, #-1]!
ldrgeb r4, [r1, #-1]!
ldrb lr, [r1, #-1]!
strgtb r3, [r0, #-1]!
strgeb r4, [r0, #-1]!
subs r2, r2, ip
strb lr, [r0, #-1]!
blt 8b
ands ip, r1, #3
beq 1b
10: bic r1, r1, #3
cmp ip, #2
ldr r3, [r1, #0]
beq 17f
blt 18f
.macro backward_copy_shift push pull
subs r2, r2, #28
blt 14f
CALGN( ands ip, r1, #31 )
CALGN( rsb ip, ip, #32 )
CALGN( sbcnes r4, ip, r2 ) @ C is always set here
CALGN( subcc r2, r2, ip )
CALGN( bcc 15f )
11: stmfd sp!, {r5 - r9}
PLD( pld [r1, #-4] )
PLD( subs r2, r2, #96 )
PLD( pld [r1, #-32] )
PLD( blt 13f )
PLD( pld [r1, #-64] )
PLD( pld [r1, #-96] )
12: PLD( pld [r1, #-128] )
13: ldmdb r1!, {r7, r8, r9, ip}
mov lr, r3, push #\push
subs r2, r2, #32
ldmdb r1!, {r3, r4, r5, r6}
orr lr, lr, ip, pull #\pull
mov ip, ip, push #\push
orr ip, ip, r9, pull #\pull
mov r9, r9, push #\push
orr r9, r9, r8, pull #\pull
mov r8, r8, push #\push
orr r8, r8, r7, pull #\pull
mov r7, r7, push #\push
orr r7, r7, r6, pull #\pull
mov r6, r6, push #\push
orr r6, r6, r5, pull #\pull
mov r5, r5, push #\push
orr r5, r5, r4, pull #\pull
mov r4, r4, push #\push
orr r4, r4, r3, pull #\pull
stmdb r0!, {r4 - r9, ip, lr}
bge 12b
PLD( cmn r2, #96 )
PLD( bge 13b )
ldmfd sp!, {r5 - r9}
14: ands ip, r2, #28
beq 16f
15: mov lr, r3, push #\push
ldr r3, [r1, #-4]!
subs ip, ip, #4
orr lr, lr, r3, pull #\pull
str lr, [r0, #-4]!
bgt 15b
CALGN( cmp r2, #0 )
CALGN( bge 11b )
16: add r1, r1, #(\pull / 8)
b 8b
.endm
backward_copy_shift push=8 pull=24
17: backward_copy_shift push=16 pull=16
18: backward_copy_shift push=24 pull=8

44
arch/arm/lib/muldi3.S Normal file
View File

@ -0,0 +1,44 @@
/*
* linux/arch/arm/lib/muldi3.S
*
* Author: Nicolas Pitre
* Created: Oct 19, 2005
* Copyright: Monta Vista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#ifdef __ARMEB__
#define xh r0
#define xl r1
#define yh r2
#define yl r3
#else
#define xl r0
#define xh r1
#define yl r2
#define yh r3
#endif
ENTRY(__muldi3)
mul xh, yl, xh
mla xh, xl, yh, xh
mov ip, xl, asr #16
mov yh, yl, asr #16
bic xl, xl, ip, lsl #16
bic yl, yl, yh, lsl #16
mla xh, yh, ip, xh
mul yh, xl, yh
mul xl, yl, xl
mul ip, yl, ip
adds xl, xl, yh, lsl #16
adc xh, xh, yh, lsr #16
adds xl, xl, ip, lsl #16
adc xh, xh, ip, lsr #16
mov pc, lr

72
arch/arm/lib/muldi3.c
View File

@ -1,72 +0,0 @@
/* More subroutines needed by GCC output code on some machines. */
/* Compile this one with gcc. */
/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
This file is part of GNU CC.
GNU CC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GNU CC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING. If not, write to
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
/* As a special exception, if you link this library with other files,
some of which are compiled with GCC, to produce an executable,
this library does not by itself cause the resulting executable
to be covered by the GNU General Public License.
This exception does not however invalidate any other reasons why
the executable file might be covered by the GNU General Public License.
*/
/* support functions required by the kernel. based on code from gcc-2.95.3 */
/* I Molton 29/07/01 */
#include "gcclib.h"
#define umul_ppmm(xh, xl, a, b) \
{register u32 __t0, __t1, __t2; \
__asm__ ("%@ Inlined umul_ppmm \n\
mov %2, %5, lsr #16 \n\
mov %0, %6, lsr #16 \n\
bic %3, %5, %2, lsl #16 \n\
bic %4, %6, %0, lsl #16 \n\
mul %1, %3, %4 \n\
mul %4, %2, %4 \n\
mul %3, %0, %3 \n\
mul %0, %2, %0 \n\
adds %3, %4, %3 \n\
addcs %0, %0, #65536 \n\
adds %1, %1, %3, lsl #16 \n\
adc %0, %0, %3, lsr #16" \
: "=&r" ((u32) (xh)), \
"=r" ((u32) (xl)), \
"=&r" (__t0), "=&r" (__t1), "=r" (__t2) \
: "r" ((u32) (a)), \
"r" ((u32) (b)));}
#define __umulsidi3(u, v) \
({DIunion __w; \
umul_ppmm (__w.s.high, __w.s.low, u, v); \
__w.ll; })
s64 __muldi3(s64 u, s64 v)
{
DIunion w;
DIunion uu, vv;
uu.ll = u, vv.ll = v;
w.ll = __umulsidi3(uu.s.low, vv.s.low);
w.s.high += ((u32) uu.s.low * (u32) vv.s.high
+ (u32) uu.s.high * (u32) vv.s.low);
return w.ll;
}

206
arch/arm/lib/sha1.S Normal file
View File

@ -0,0 +1,206 @@
/*
* linux/arch/arm/lib/sha1.S
*
* SHA transform optimized for ARM
*
* Copyright: (C) 2005 by Nicolas Pitre <nico@cam.org>
* Created: September 17, 2005
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* The reference implementation for this code is linux/lib/sha1.c
*/
#include <linux/linkage.h>
.text
/*
* void sha_transform(__u32 *digest, const char *in, __u32 *W)
*
* Note: the "in" ptr may be unaligned.
*/
ENTRY(sha_transform)
stmfd sp!, {r4 - r8, lr}
@ for (i = 0; i < 16; i++)
@ W[i] = be32_to_cpu(in[i]); */
#ifdef __ARMEB__
mov r4, r0
mov r0, r2
mov r2, #64
bl memcpy
mov r2, r0
mov r0, r4
#else
mov r3, r2
mov lr, #16
1: ldrb r4, [r1], #1
ldrb r5, [r1], #1
ldrb r6, [r1], #1
ldrb r7, [r1], #1
subs lr, lr, #1
orr r5, r5, r4, lsl #8
orr r6, r6, r5, lsl #8
orr r7, r7, r6, lsl #8
str r7, [r3], #4
bne 1b
#endif
@ for (i = 0; i < 64; i++)
@ W[i+16] = ror(W[i+13] ^ W[i+8] ^ W[i+2] ^ W[i], 31);
sub r3, r2, #4
mov lr, #64
2: ldr r4, [r3, #4]!
subs lr, lr, #1
ldr r5, [r3, #8]
ldr r6, [r3, #32]
ldr r7, [r3, #52]
eor r4, r4, r5
eor r4, r4, r6
eor r4, r4, r7
mov r4, r4, ror #31
str r4, [r3, #64]
bne 2b
/*
* The SHA functions are:
*
* f1(B,C,D) = (D ^ (B & (C ^ D)))
* f2(B,C,D) = (B ^ C ^ D)
* f3(B,C,D) = ((B & C) | (D & (B | C)))
*
* Then the sub-blocks are processed as follows:
*
* A' = ror(A, 27) + f(B,C,D) + E + K + *W++
* B' = A
* C' = ror(B, 2)
* D' = C
* E' = D
*
* We therefore unroll each loop 5 times to avoid register shuffling.
* Also the ror for C (and also D and E which are successivelyderived
* from it) is applied in place to cut on an additional mov insn for
* each round.
*/
.macro sha_f1, A, B, C, D, E
ldr r3, [r2], #4
eor ip, \C, \D
add \E, r1, \E, ror #2
and ip, \B, ip, ror #2
add \E, \E, \A, ror #27
eor ip, ip, \D, ror #2
add \E, \E, r3
add \E, \E, ip
.endm
.macro sha_f2, A, B, C, D, E
ldr r3, [r2], #4
add \E, r1, \E, ror #2
eor ip, \B, \C, ror #2
add \E, \E, \A, ror #27
eor ip, ip, \D, ror #2
add \E, \E, r3
add \E, \E, ip
.endm
.macro sha_f3, A, B, C, D, E
ldr r3, [r2], #4
add \E, r1, \E, ror #2
orr ip, \B, \C, ror #2
add \E, \E, \A, ror #27
and ip, ip, \D, ror #2
add \E, \E, r3
and r3, \B, \C, ror #2
orr ip, ip, r3
add \E, \E, ip
.endm
ldmia r0, {r4 - r8}
mov lr, #4
ldr r1, .L_sha_K + 0
/* adjust initial values */
mov r6, r6, ror #30
mov r7, r7, ror #30
mov r8, r8, ror #30
3: subs lr, lr, #1
sha_f1 r4, r5, r6, r7, r8
sha_f1 r8, r4, r5, r6, r7
sha_f1 r7, r8, r4, r5, r6
sha_f1 r6, r7, r8, r4, r5
sha_f1 r5, r6, r7, r8, r4
bne 3b
ldr r1, .L_sha_K + 4
mov lr, #4
4: subs lr, lr, #1
sha_f2 r4, r5, r6, r7, r8
sha_f2 r8, r4, r5, r6, r7
sha_f2 r7, r8, r4, r5, r6
sha_f2 r6, r7, r8, r4, r5
sha_f2 r5, r6, r7, r8, r4
bne 4b
ldr r1, .L_sha_K + 8
mov lr, #4
5: subs lr, lr, #1
sha_f3 r4, r5, r6, r7, r8
sha_f3 r8, r4, r5, r6, r7
sha_f3 r7, r8, r4, r5, r6
sha_f3 r6, r7, r8, r4, r5
sha_f3 r5, r6, r7, r8, r4
bne 5b
ldr r1, .L_sha_K + 12
mov lr, #4
6: subs lr, lr, #1
sha_f2 r4, r5, r6, r7, r8
sha_f2 r8, r4, r5, r6, r7
sha_f2 r7, r8, r4, r5, r6
sha_f2 r6, r7, r8, r4, r5
sha_f2 r5, r6, r7, r8, r4
bne 6b
ldmia r0, {r1, r2, r3, ip, lr}
add r4, r1, r4
add r5, r2, r5
add r6, r3, r6, ror #2
add r7, ip, r7, ror #2
add r8, lr, r8, ror #2
stmia r0, {r4 - r8}
ldmfd sp!, {r4 - r8, pc}
.L_sha_K:
.word 0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6
/*
* void sha_init(__u32 *buf)
*/
.L_sha_initial_digest:
.word 0x67452301, 0xefcdab89, 0x98badcfe, 0x10325476, 0xc3d2e1f0
ENTRY(sha_init)
str lr, [sp, #-4]!
adr r1, .L_sha_initial_digest
ldmia r1, {r1, r2, r3, ip, lr}
stmia r0, {r1, r2, r3, ip, lr}
ldr pc, [sp], #4

154
arch/arm/lib/uaccess.S
View File

@ -43,8 +43,6 @@ ENTRY(__arch_copy_to_user)
stmfd sp!, {r2, r4 - r7, lr}
cmp r2, #4
blt .c2u_not_enough
PLD( pld [r1, #0] )
PLD( pld [r0, #0] )
ands ip, r0, #3
bne .c2u_dest_not_aligned
.c2u_dest_aligned:
@ -73,25 +71,13 @@ USER( strt r3, [r0], #4) @ May fault
sub r2, r2, ip
subs ip, ip, #32
blt .c2u_0rem8lp
PLD( pld [r1, #28] )
PLD( pld [r0, #28] )
PLD( subs ip, ip, #64 )
PLD( blt .c2u_0cpynopld )
PLD( pld [r1, #60] )
PLD( pld [r0, #60] )
.c2u_0cpy8lp:
PLD( pld [r1, #92] )
PLD( pld [r0, #92] )
.c2u_0cpynopld: ldmia r1!, {r3 - r6}
.c2u_0cpy8lp: ldmia r1!, {r3 - r6}
stmia r0!, {r3 - r6} @ Shouldnt fault
ldmia r1!, {r3 - r6}
subs ip, ip, #32
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .c2u_0cpy8lp
PLD( cmn ip, #64 )
PLD( bge .c2u_0cpynopld )
PLD( add ip, ip, #64 )
.c2u_0rem8lp: cmn ip, #16
ldmgeia r1!, {r3 - r6}
@ -143,17 +129,8 @@ USER( strt r3, [r0], #4) @ May fault
sub r2, r2, ip
subs ip, ip, #16
blt .c2u_1rem8lp
PLD( pld [r1, #12] )
PLD( pld [r0, #12] )
PLD( subs ip, ip, #32 )
PLD( blt .c2u_1cpynopld )
PLD( pld [r1, #28] )
PLD( pld [r0, #28] )
.c2u_1cpy8lp:
PLD( pld [r1, #44] )
PLD( pld [r0, #44] )
.c2u_1cpynopld: mov r3, r7, pull #8
.c2u_1cpy8lp: mov r3, r7, pull #8
ldmia r1!, {r4 - r7}
subs ip, ip, #16
orr r3, r3, r4, push #24
@ -165,9 +142,6 @@ USER( strt r3, [r0], #4) @ May fault
orr r6, r6, r7, push #24
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .c2u_1cpy8lp
PLD( cmn ip, #32 )
PLD( bge .c2u_1cpynopld )
PLD( add ip, ip, #32 )
.c2u_1rem8lp: tst ip, #8
movne r3, r7, pull #8
@ -210,17 +184,8 @@ USER( strt r3, [r0], #4) @ May fault
sub r2, r2, ip
subs ip, ip, #16
blt .c2u_2rem8lp
PLD( pld [r1, #12] )
PLD( pld [r0, #12] )
PLD( subs ip, ip, #32 )
PLD( blt .c2u_2cpynopld )
PLD( pld [r1, #28] )
PLD( pld [r0, #28] )
.c2u_2cpy8lp:
PLD( pld [r1, #44] )
PLD( pld [r0, #44] )
.c2u_2cpynopld: mov r3, r7, pull #16
.c2u_2cpy8lp: mov r3, r7, pull #16
ldmia r1!, {r4 - r7}
subs ip, ip, #16
orr r3, r3, r4, push #16
@ -232,9 +197,6 @@ USER( strt r3, [r0], #4) @ May fault
orr r6, r6, r7, push #16
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .c2u_2cpy8lp
PLD( cmn ip, #32 )
PLD( bge .c2u_2cpynopld )
PLD( add ip, ip, #32 )
.c2u_2rem8lp: tst ip, #8
movne r3, r7, pull #16
@ -277,17 +239,8 @@ USER( strt r3, [r0], #4) @ May fault
sub r2, r2, ip
subs ip, ip, #16
blt .c2u_3rem8lp
PLD( pld [r1, #12] )
PLD( pld [r0, #12] )
PLD( subs ip, ip, #32 )
PLD( blt .c2u_3cpynopld )
PLD( pld [r1, #28] )
PLD( pld [r0, #28] )
.c2u_3cpy8lp:
PLD( pld [r1, #44] )
PLD( pld [r0, #44] )
.c2u_3cpynopld: mov r3, r7, pull #24
.c2u_3cpy8lp: mov r3, r7, pull #24
ldmia r1!, {r4 - r7}
subs ip, ip, #16
orr r3, r3, r4, push #8
@ -299,9 +252,6 @@ USER( strt r3, [r0], #4) @ May fault
orr r6, r6, r7, push #8
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .c2u_3cpy8lp
PLD( cmn ip, #32 )
PLD( bge .c2u_3cpynopld )
PLD( add ip, ip, #32 )
.c2u_3rem8lp: tst ip, #8
movne r3, r7, pull #24
@ -356,8 +306,6 @@ ENTRY(__arch_copy_from_user)
stmfd sp!, {r0, r2, r4 - r7, lr}
cmp r2, #4
blt .cfu_not_enough
PLD( pld [r1, #0] )
PLD( pld [r0, #0] )
ands ip, r0, #3
bne .cfu_dest_not_aligned
.cfu_dest_aligned:
@ -385,25 +333,13 @@ USER( ldrt r3, [r1], #4)
sub r2, r2, ip
subs ip, ip, #32
blt .cfu_0rem8lp
PLD( pld [r1, #28] )
PLD( pld [r0, #28] )
PLD( subs ip, ip, #64 )
PLD( blt .cfu_0cpynopld )
PLD( pld [r1, #60] )
PLD( pld [r0, #60] )
.cfu_0cpy8lp:
PLD( pld [r1, #92] )
PLD( pld [r0, #92] )
.cfu_0cpynopld: ldmia r1!, {r3 - r6} @ Shouldnt fault
.cfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault
stmia r0!, {r3 - r6}
ldmia r1!, {r3 - r6} @ Shouldnt fault
subs ip, ip, #32
stmia r0!, {r3 - r6}
bpl .cfu_0cpy8lp
PLD( cmn ip, #64 )
PLD( bge .cfu_0cpynopld )
PLD( add ip, ip, #64 )
.cfu_0rem8lp: cmn ip, #16
ldmgeia r1!, {r3 - r6} @ Shouldnt fault
@ -456,17 +392,8 @@ USER( ldrt r7, [r1], #4) @ May fault
sub r2, r2, ip
subs ip, ip, #16
blt .cfu_1rem8lp
PLD( pld [r1, #12] )
PLD( pld [r0, #12] )
PLD( subs ip, ip, #32 )
PLD( blt .cfu_1cpynopld )
PLD( pld [r1, #28] )
PLD( pld [r0, #28] )
.cfu_1cpy8lp:
PLD( pld [r1, #44] )
PLD( pld [r0, #44] )
.cfu_1cpynopld: mov r3, r7, pull #8
.cfu_1cpy8lp: mov r3, r7, pull #8
ldmia r1!, {r4 - r7} @ Shouldnt fault
subs ip, ip, #16
orr r3, r3, r4, push #24
@ -478,9 +405,6 @@ USER( ldrt r7, [r1], #4) @ May fault
orr r6, r6, r7, push #24
stmia r0!, {r3 - r6}
bpl .cfu_1cpy8lp
PLD( cmn ip, #32 )
PLD( bge .cfu_1cpynopld )
PLD( add ip, ip, #32 )
.cfu_1rem8lp: tst ip, #8
movne r3, r7, pull #8
@ -523,17 +447,8 @@ USER( ldrt r7, [r1], #4) @ May fault
sub r2, r2, ip
subs ip, ip, #16
blt .cfu_2rem8lp
PLD( pld [r1, #12] )
PLD( pld [r0, #12] )
PLD( subs ip, ip, #32 )
PLD( blt .cfu_2cpynopld )
PLD( pld [r1, #28] )
PLD( pld [r0, #28] )
.cfu_2cpy8lp:
PLD( pld [r1, #44] )
PLD( pld [r0, #44] )
.cfu_2cpynopld: mov r3, r7, pull #16
.cfu_2cpy8lp: mov r3, r7, pull #16
ldmia r1!, {r4 - r7} @ Shouldnt fault
subs ip, ip, #16
orr r3, r3, r4, push #16
@ -545,9 +460,6 @@ USER( ldrt r7, [r1], #4) @ May fault
orr r6, r6, r7, push #16
stmia r0!, {r3 - r6}
bpl .cfu_2cpy8lp
PLD( cmn ip, #32 )
PLD( bge .cfu_2cpynopld )
PLD( add ip, ip, #32 )
.cfu_2rem8lp: tst ip, #8
movne r3, r7, pull #16
@ -590,17 +502,8 @@ USER( ldrt r7, [r1], #4) @ May fault
sub r2, r2, ip
subs ip, ip, #16
blt .cfu_3rem8lp
PLD( pld [r1, #12] )
PLD( pld [r0, #12] )
PLD( subs ip, ip, #32 )
PLD( blt .cfu_3cpynopld )
PLD( pld [r1, #28] )
PLD( pld [r0, #28] )
.cfu_3cpy8lp:
PLD( pld [r1, #44] )
PLD( pld [r0, #44] )
.cfu_3cpynopld: mov r3, r7, pull #24
.cfu_3cpy8lp: mov r3, r7, pull #24
ldmia r1!, {r4 - r7} @ Shouldnt fault
orr r3, r3, r4, push #8
mov r4, r4, pull #24
@ -612,9 +515,6 @@ USER( ldrt r7, [r1], #4) @ May fault
stmia r0!, {r3 - r6}
subs ip, ip, #16
bpl .cfu_3cpy8lp
PLD( cmn ip, #32 )
PLD( bge .cfu_3cpynopld )
PLD( add ip, ip, #32 )
.cfu_3rem8lp: tst ip, #8
movne r3, r7, pull #24
@ -657,41 +557,3 @@ USER( ldrgtbt r3, [r1], #1) @ May fault
LOADREGS(fd,sp!, {r4 - r7, pc})
.previous
/* Prototype: int __arch_clear_user(void *addr, size_t sz)
* Purpose : clear some user memory
* Params : addr - user memory address to clear
* : sz - number of bytes to clear
* Returns : number of bytes NOT cleared
*/
ENTRY(__arch_clear_user)
stmfd sp!, {r1, lr}
mov r2, #0
cmp r1, #4
blt 2f
ands ip, r0, #3
beq 1f
cmp ip, #2
USER( strbt r2, [r0], #1)
USER( strlebt r2, [r0], #1)
USER( strltbt r2, [r0], #1)
rsb ip, ip, #4
sub r1, r1, ip @ 7 6 5 4 3 2 1
1: subs r1, r1, #8 @ -1 -2 -3 -4 -5 -6 -7
USER( strplt r2, [r0], #4)
USER( strplt r2, [r0], #4)
bpl 1b
adds r1, r1, #4 @ 3 2 1 0 -1 -2 -3
USER( strplt r2, [r0], #4)
2: tst r1, #2 @ 1x 1x 0x 0x 1x 1x 0x
USER( strnebt r2, [r0], #1)
USER( strnebt r2, [r0], #1)
tst r1, #1 @ x1 x0 x1 x0 x1 x0 x1
USER( strnebt r2, [r0], #1)
mov r0, #0
LOADREGS(fd,sp!, {r1, pc})
.section .fixup,"ax"
.align 0
9001: LOADREGS(fd,sp!, {r0, pc})
.previous

35
arch/arm/lib/ucmpdi2.S Normal file
View File

@ -0,0 +1,35 @@
/*
* linux/arch/arm/lib/ucmpdi2.S
*
* Author: Nicolas Pitre
* Created: Oct 19, 2005
* Copyright: Monta Vista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#ifdef __ARMEB__
#define xh r0
#define xl r1
#define yh r2
#define yl r3
#else
#define xl r0
#define xh r1
#define yl r2
#define yh r3
#endif
ENTRY(__ucmpdi2)
cmp xh, yh
cmpeq xl, yl
movlo r0, #0
moveq r0, #1
movhi r0, #2
mov pc, lr

49
arch/arm/lib/ucmpdi2.c
View File

@ -1,49 +0,0 @@
/* More subroutines needed by GCC output code on some machines. */
/* Compile this one with gcc. */
/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
This file is part of GNU CC.
GNU CC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GNU CC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING. If not, write to
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
/* As a special exception, if you link this library with other files,
some of which are compiled with GCC, to produce an executable,
this library does not by itself cause the resulting executable
to be covered by the GNU General Public License.
This exception does not however invalidate any other reasons why
the executable file might be covered by the GNU General Public License.
*/
/* support functions required by the kernel. based on code from gcc-2.95.3 */
/* I Molton 29/07/01 */
#include "gcclib.h"
int __ucmpdi2(s64 a, s64 b)
{
DIunion au, bu;
au.ll = a, bu.ll = b;
if ((u32) au.s.high < (u32) bu.s.high)
return 0;
else if ((u32) au.s.high > (u32) bu.s.high)
return 2;
if ((u32) au.s.low < (u32) bu.s.low)
return 0;
else if ((u32) au.s.low > (u32) bu.s.low)
return 2;
return 1;
}

2
arch/arm/mach-aaec2000/Makefile
View File

@ -3,7 +3,7 @@
#
# Common support (must be linked before board specific support)
obj-y += core.o
obj-y += core.o clock.o
# Specific board support
obj-$(CONFIG_MACH_AAED2000) += aaed2000.o

50
arch/arm/mach-aaec2000/aaed2000.c
View File

@ -27,16 +27,65 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/arch/aaed2000.h>
#include "core.h"
static void aaed2000_clcd_disable(struct clcd_fb *fb)
{
AAED_EXT_GPIO &= ~AAED_EGPIO_LCD_PWR_EN;
}
static void aaed2000_clcd_enable(struct clcd_fb *fb)
{
AAED_EXT_GPIO |= AAED_EGPIO_LCD_PWR_EN;
}
struct aaec2000_clcd_info clcd_info = {
.enable = aaed2000_clcd_enable,
.disable = aaed2000_clcd_disable,
.panel = {
.mode = {
.name = "Sharp",
.refresh = 60,
.xres = 640,
.yres = 480,
.pixclock = 39721,
.left_margin = 20,
.right_margin = 44,
.upper_margin = 21,
.lower_margin = 34,
.hsync_len = 96,
.vsync_len = 2,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED,
},
.width = -1,
.height = -1,
.tim2 = TIM2_IVS | TIM2_IHS,
.cntl = CNTL_LCDTFT,
.bpp = 16,
},
};
static void __init aaed2000_init_irq(void)
{
aaec2000_init_irq();
}
static void __init aaed2000_init(void)
{
aaec2000_set_clcd_plat_data(&clcd_info);
}
static struct map_desc aaed2000_io_desc[] __initdata = {
{ EXT_GPIO_VBASE, EXT_GPIO_PBASE, EXT_GPIO_LENGTH, MT_DEVICE }, /* Ext GPIO */
};
static void __init aaed2000_map_io(void)
{
aaec2000_map_io();
iotable_init(aaed2000_io_desc, ARRAY_SIZE(aaed2000_io_desc));
}
MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
@ -47,4 +96,5 @@ MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
.map_io = aaed2000_map_io,
.init_irq = aaed2000_init_irq,
.timer = &aaec2000_timer,
.init_machine = aaed2000_init,
MACHINE_END

110
arch/arm/mach-aaec2000/clock.c Normal file
View File

@ -0,0 +1,110 @@
/*
* linux/arch/arm/mach-aaec2000/clock.c
*
* Copyright (C) 2005 Nicolas Bellido Y Ortega
*
* Based on linux/arch/arm/mach-integrator/clock.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <asm/semaphore.h>
#include <asm/hardware/clock.h>
#include "clock.h"
static LIST_HEAD(clocks);
static DECLARE_MUTEX(clocks_sem);
struct clk *clk_get(struct device *dev, const char *id)
{
struct clk *p, *clk = ERR_PTR(-ENOENT);
down(&clocks_sem);
list_for_each_entry(p, &clocks, node) {
if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
clk = p;
break;
}
}
up(&clocks_sem);
return clk;
}
EXPORT_SYMBOL(clk_get);
void clk_put(struct clk *clk)
{
module_put(clk->owner);
}
EXPORT_SYMBOL(clk_put);
int clk_enable(struct clk *clk)
{
return 0;
}
EXPORT_SYMBOL(clk_enable);
void clk_disable(struct clk *clk)
{
}
EXPORT_SYMBOL(clk_disable);
int clk_use(struct clk *clk)
{
return 0;
}
EXPORT_SYMBOL(clk_use);
void clk_unuse(struct clk *clk)
{
}
EXPORT_SYMBOL(clk_unuse);
unsigned long clk_get_rate(struct clk *clk)
{
return clk->rate;
}
EXPORT_SYMBOL(clk_get_rate);
long clk_round_rate(struct clk *clk, unsigned long rate)
{
return rate;
}
EXPORT_SYMBOL(clk_round_rate);
int clk_set_rate(struct clk *clk, unsigned long rate)
{
return 0;
}
EXPORT_SYMBOL(clk_set_rate);
int clk_register(struct clk *clk)
{
down(&clocks_sem);
list_add(&clk->node, &clocks);
up(&clocks_sem);
return 0;
}
EXPORT_SYMBOL(clk_register);
void clk_unregister(struct clk *clk)
{
down(&clocks_sem);
list_del(&clk->node);
up(&clocks_sem);
}
EXPORT_SYMBOL(clk_unregister);
static int __init clk_init(void)
{
return 0;
}
arch_initcall(clk_init);

23
arch/arm/mach-aaec2000/clock.h Normal file
View File

@ -0,0 +1,23 @@
/*
* linux/arch/arm/mach-aaec2000/clock.h
*
* Copyright (C) 2005 Nicolas Bellido Y Ortega
*
* Based on linux/arch/arm/mach-integrator/clock.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
struct module;
struct clk {
struct list_head node;
unsigned long rate;
struct module *owner;
const char *name;
void *data;
};
int clk_register(struct clk *clk);
void clk_unregister(struct clk *clk);

135
arch/arm/mach-aaec2000/core.c
View File

@ -13,19 +13,27 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/timex.h>
#include <linux/signal.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/sizes.h>
#include <asm/hardware/amba.h>
#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include "core.h"
#include "clock.h"
/*
* Common I/O mapping:
*
@ -40,9 +48,17 @@
* default mapping provided here.
*/
static struct map_desc standard_io_desc[] __initdata = {
/* virtual physical length type */
{ VIO_APB_BASE, PIO_APB_BASE, IO_APB_LENGTH, MT_DEVICE },
{ VIO_AHB_BASE, PIO_AHB_BASE, IO_AHB_LENGTH, MT_DEVICE }
{
.virtual = VIO_APB_BASE,
.physical = __phys_to_pfn(PIO_APB_BASE),
.length = IO_APB_LENGTH,
.type = MT_DEVICE
}, {
.virtual = VIO_AHB_BASE,
.physical = __phys_to_pfn(PIO_AHB_BASE),
.length = IO_AHB_LENGTH,
.type = MT_DEVICE
}
};
void __init aaec2000_map_io(void)
@ -155,3 +171,116 @@ struct sys_timer aaec2000_timer = {
.offset = aaec2000_gettimeoffset,
};
static struct clcd_panel mach_clcd_panel;
static int aaec2000_clcd_setup(struct clcd_fb *fb)
{
dma_addr_t dma;
fb->panel = &mach_clcd_panel;
fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, SZ_1M,
&dma, GFP_KERNEL);
if (!fb->fb.screen_base) {
printk(KERN_ERR "CLCD: unable to map framebuffer\n");
return -ENOMEM;
}
fb->fb.fix.smem_start = dma;
fb->fb.fix.smem_len = SZ_1M;
return 0;
}
static int aaec2000_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
{
return dma_mmap_writecombine(&fb->dev->dev, vma,
fb->fb.screen_base,
fb->fb.fix.smem_start,
fb->fb.fix.smem_len);
}
static void aaec2000_clcd_remove(struct clcd_fb *fb)
{
dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
fb->fb.screen_base, fb->fb.fix.smem_start);
}
static struct clcd_board clcd_plat_data = {
.name = "AAEC-2000",
.check = clcdfb_check,
.decode = clcdfb_decode,
.setup = aaec2000_clcd_setup,
.mmap = aaec2000_clcd_mmap,
.remove = aaec2000_clcd_remove,
};
static struct amba_device clcd_device = {
.dev = {
.bus_id = "mb:16",
.coherent_dma_mask = ~0,
.platform_data = &clcd_plat_data,
},
.res = {
.start = AAEC_CLCD_PHYS,
.end = AAEC_CLCD_PHYS + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = { INT_LCD, NO_IRQ },
.periphid = 0x41110,
};
static struct amba_device *amba_devs[] __initdata = {
&clcd_device,
};
static struct clk aaec2000_clcd_clk = {
.name = "CLCDCLK",
};
void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *clcd)
{
clcd_plat_data.enable = clcd->enable;
clcd_plat_data.disable = clcd->disable;
memcpy(&mach_clcd_panel, &clcd->panel, sizeof(struct clcd_panel));
}
static struct flash_platform_data aaec2000_flash_data = {
.map_name = "cfi_probe",
.width = 4,
};
static struct resource aaec2000_flash_resource = {
.start = AAEC_FLASH_BASE,
.end = AAEC_FLASH_BASE + AAEC_FLASH_SIZE,
.flags = IORESOURCE_MEM,
};
static struct platform_device aaec2000_flash_device = {
.name = "armflash",
.id = 0,
.dev = {
.platform_data = &aaec2000_flash_data,
},
.num_resources = 1,
.resource = &aaec2000_flash_resource,
};
static int __init aaec2000_init(void)
{
int i;
clk_register(&aaec2000_clcd_clk);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
platform_device_register(&aaec2000_flash_device);
return 0;
};
arch_initcall(aaec2000_init);

11
arch/arm/mach-aaec2000/core.h
View File

@ -9,8 +9,19 @@
*
*/
#include <asm/hardware/amba_clcd.h>
struct sys_timer;
extern struct sys_timer aaec2000_timer;
extern void __init aaec2000_map_io(void);
extern void __init aaec2000_init_irq(void);
struct aaec2000_clcd_info {
struct clcd_panel panel;
void (*disable)(struct clcd_fb *);
void (*enable)(struct clcd_fb *);
};
extern void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *);

12
arch/arm/mach-clps711x/autcpu12.c
View File

@ -46,10 +46,14 @@
*/
static struct map_desc autcpu12_io_desc[] __initdata = {
/* virtual, physical, length, type */
/* memory-mapped extra io and CS8900A Ethernet chip */
/* ethernet chip */
{ AUTCPU12_VIRT_CS8900A, AUTCPU12_PHYS_CS8900A, SZ_1M, MT_DEVICE }
/* memory-mapped extra io and CS8900A Ethernet chip */
/* ethernet chip */
{
.virtual = AUTCPU12_VIRT_CS8900A,
.pfn = __phys_to_pfn(AUTCPU12_PHYS_CS8900A),
.length = SZ_1M,
.type = MT_DEVICE
}
};
void __init autcpu12_map_io(void)

7
arch/arm/mach-clps711x/cdb89712.c
View File

@ -39,7 +39,12 @@
* ethernet driver, perhaps.
*/
static struct map_desc cdb89712_io_desc[] __initdata = {
{ ETHER_BASE, ETHER_START, ETHER_SIZE, MT_DEVICE }
{
.virtual = ETHER_BASE,
.pfn =__phys_to_pfn(ETHER_START),
.length = ETHER_SIZE,
.type = MT_DEVICE
}
};
static void __init cdb89712_map_io(void)

12
arch/arm/mach-clps711x/ceiva.c
View File

@ -37,11 +37,13 @@
#include "common.h"
static struct map_desc ceiva_io_desc[] __initdata = {
/* virtual, physical, length, type */
/* SED1355 controlled video RAM & registers */
{ CEIVA_VIRT_SED1355, CEIVA_PHYS_SED1355, SZ_2M, MT_DEVICE }
/* SED1355 controlled video RAM & registers */
{
.virtual = CEIVA_VIRT_SED1355,
.pfn = __phys_to_pfn(CEIVA_PHYS_SED1355),
.length = SZ_2M,
.type = MT_DEVICE
}
};

Some files were not shown because too many files have changed in this diff Show More