Merge branches 'x86/cleanups', 'x86/cpu', 'x86/debug', 'x86/mce2', 'x86/mm', 'x86/mtrr', 'x86/setup', 'x86/setup-memory', 'x86/urgent', 'x86/uv', 'x86/x2apic' and 'linus' into x86/core

Conflicts: arch/parisc/kernel/irq.c
2009-03-18 13:19:49 +01:00 · 2009-03-18 13:19:49 +01:00 · 705bb9dc72
parent 250981e6e1 48f4c485c2 f4c3c4cdb1 a6b6a14e0c 0920dce7d5 4e16c88875 be721696ca 0a699af8e6 42854dc0a6 2c74d66624 ce4e240c27 ee568b25ee
commit 705bb9dc72
630 changed files with 28645 additions and 11655 deletions
--- a/Documentation/RCU/checklist.txt
+++ b/Documentation/RCU/checklist.txt
@ -298,3 +298,15 @@ over a rather long period of time, but improvements are always welcome!

 	Note that, rcu_assign_pointer() and rcu_dereference() relate to
 	SRCU just as they do to other forms of RCU.
+
+15.	The whole point of call_rcu(), synchronize_rcu(), and friends
+	is to wait until all pre-existing readers have finished before
+	carrying out some otherwise-destructive operation.  It is
+	therefore critically important to -first- remove any path
+	that readers can follow that could be affected by the
+	destructive operation, and -only- -then- invoke call_rcu(),
+	synchronize_rcu(), or friends.
+
+	Because these primitives only wait for pre-existing readers,
+	it is the caller's responsibility to guarantee safety to
+	any subsequent readers.
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@ -335,3 +335,12 @@ Why:	In 2.6.18 the Secmark concept was introduced to replace the "compat_net"
 	Secmark, it is time to deprecate the older mechanism and start the
 	process of removing the old code.
 Who:	Paul Moore <paul.moore@hp.com>
+---------------------------
+
+What:	sysfs ui for changing p4-clockmod parameters
+When:	September 2009
+Why:	See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
+	e088e4c9cdb618675874becb91b2fd581ee707e6.
+	Removal is subject to fixing any remaining bugs in ACPI which may
+	cause the thermal throttling not to happen at the right time.
+Who:	Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>
--- a/Documentation/filesystems/ext2.txt
+++ b/Documentation/filesystems/ext2.txt
@ -373,10 +373,10 @@ Filesystem Resizing	http://ext2resize.sourceforge.net/
 Compression (*)		http://e2compr.sourceforge.net/

 Implementations for:
-Windows 95/98/NT/2000	http://uranus.it.swin.edu.au/~jn/linux/Explore2fs.htm
-Windows 95 (*)		http://www.yipton.demon.co.uk/content.html#FSDEXT2
+Windows 95/98/NT/2000	http://www.chrysocome.net/explore2fs
+Windows 95 (*)		http://www.yipton.net/content.html#FSDEXT2
 DOS client (*)		ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
-OS/2			http://perso.wanadoo.fr/matthieu.willm/ext2-os2/
-RISC OS client		ftp://ftp.barnet.ac.uk/pub/acorn/armlinux/iscafs/
+OS/2 (*)		ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
+RISC OS client		http://www.esw-heim.tu-clausthal.de/~marco/smorbrod/IscaFS/

-(*) no longer actively developed/supported (as of Apr 2001)
+(*) no longer actively developed/supported (as of Mar 2009)
--- a/Documentation/filesystems/ext3.txt
+++ b/Documentation/filesystems/ext3.txt
@ -198,5 +198,5 @@ kernel source:	<file:fs/ext3/>
 programs: 	http://e2fsprogs.sourceforge.net/
 		http://ext2resize.sourceforge.net

-useful links:	http://www-106.ibm.com/developerworks/linux/library/l-fs7/
-		http://www-106.ibm.com/developerworks/linux/library/l-fs8/
+useful links:	http://www.ibm.com/developerworks/library/l-fs7.html
+		http://www.ibm.com/developerworks/library/l-fs8.html
--- a/Documentation/filesystems/squashfs.txt
+++ b/Documentation/filesystems/squashfs.txt
@ -22,7 +22,7 @@ Squashfs filesystem features versus Cramfs:

 				Squashfs		Cramfs

-Max filesystem size:		2^64			16 MiB
+Max filesystem size:		2^64			256 MiB
 Max file size:			~ 2 TiB			16 MiB
 Max files:			unlimited		unlimited
 Max directories:		unlimited		unlimited
--- a/Documentation/hwmon/lm90
+++ b/Documentation/hwmon/lm90
@ -42,6 +42,11 @@ Supported chips:
    Addresses scanned: I2C 0x4e
    Datasheet: Publicly available at the Maxim website
               http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497
+  * Maxim MAX6648
+    Prefix: 'max6646'
+    Addresses scanned: I2C 0x4c
+    Datasheet: Publicly available at the Maxim website
+               http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
  * Maxim MAX6649
    Prefix: 'max6646'
    Addresses scanned: I2C 0x4c
@ -74,6 +79,11 @@ Supported chips:
                           0x4c, 0x4d and 0x4e
    Datasheet: Publicly available at the Maxim website
               http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370
+  * Maxim MAX6692
+    Prefix: 'max6646'
+    Addresses scanned: I2C 0x4c
+    Datasheet: Publicly available at the Maxim website
+               http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500


 Author: Jean Delvare <khali@linux-fr.org>
--- a/Documentation/logo.gif
+++ b/Documentation/logo.gif
--- a/Documentation/logo.svg
+++ b/Documentation/logo.svg
--- a/Documentation/logo.txt
+++ b/Documentation/logo.txt
@ -1,13 +1,4 @@
-This is the full-colour version of the currently unofficial Linux logo
-("currently unofficial" just means that there has been no paperwork and
-that I have not really announced it yet).  It was created by Larry Ewing,
-and is freely usable as long as you acknowledge Larry as the original
-artist. 
-
-Note that there are black-and-white versions of this available that
-scale down to smaller sizes and are better for letterheads or whatever
-you want to use it for: for the full range of logos take a look at
-Larry's web-page:
-
-	http://www.isc.tamu.edu/~lewing/linux/
+Tux is taking a three month sabbatical to work as a barber, so Tuz is
+standing in.  He's taken pains to ensure you'll hardly notice.

+Image by Andrew McGown and Josh Bush.  Image is licensed CC BY-SA.
--- a/Documentation/networking/ipv6.txt
+++ b/Documentation/networking/ipv6.txt
@ -0,0 +1,35 @@
+
+Options for the ipv6 module are supplied as parameters at load time.
+
+Module options may be given as command line arguments to the insmod
+or modprobe command, but are usually specified in either the
+/etc/modules.conf or /etc/modprobe.conf configuration file, or in a
+distro-specific configuration file.
+
+The available ipv6 module parameters are listed below.  If a parameter
+is not specified the default value is used.
+
+The parameters are as follows:
+
+disable
+
+	Specifies whether to load the IPv6 module, but disable all
+	its functionality.  This might be used when another module
+	has a dependency on the IPv6 module being loaded, but no
+	IPv6 addresses or operations are desired.
+
+	The possible values and their effects are:
+
+	0
+		IPv6 is enabled.
+
+		This is the default value.
+
+	1
+		IPv6 is disabled.
+
+		No IPv6 addresses will be added to interfaces, and
+		it will not be possible to open an IPv6 socket.
+
+		A reboot is required to enable IPv6.
+
--- a/Documentation/x86/earlyprintk.txt
+++ b/Documentation/x86/earlyprintk.txt
@ -0,0 +1,101 @@
+
+Mini-HOWTO for using the earlyprintk=dbgp boot option with a
+USB2 Debug port key and a debug cable, on x86 systems.
+
+You need two computers, the 'USB debug key' special gadget and
+and two USB cables, connected like this:
+
+  [host/target] <-------> [USB debug key] <-------> [client/console]
+
+1. There are three specific hardware requirements:
+
+ a.) Host/target system needs to have USB debug port capability.
+
+ You can check this capability by looking at a 'Debug port' bit in
+ the lspci -vvv output:
+
+ # lspci -vvv
+ ...
+ 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
+         Subsystem: Lenovo ThinkPad T61
+         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
+         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+         Latency: 0
+         Interrupt: pin D routed to IRQ 19
+         Region 0: Memory at fe227000 (32-bit, non-prefetchable) [size=1K]
+         Capabilities: [50] Power Management version 2
+                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
+                 Status: D0 PME-Enable- DSel=0 DScale=0 PME+
+         Capabilities: [58] Debug port: BAR=1 offset=00a0
+                            ^^^^^^^^^^^ <==================== [ HERE ]
+	 Kernel driver in use: ehci_hcd
+         Kernel modules: ehci-hcd
+ ...
+
+( If your system does not list a debug port capability then you probably
+  wont be able to use the USB debug key. )
+
+ b.) You also need a Netchip USB debug cable/key:
+
+        http://www.plxtech.com/products/NET2000/NET20DC/default.asp
+
+     This is a small blue plastic connector with two USB connections,
+     it draws power from its USB connections.
+
+ c.) Thirdly, you need a second client/console system with a regular USB port.
+
+2. Software requirements:
+
+ a.) On the host/target system:
+
+    You need to enable the following kernel config option:
+
+      CONFIG_EARLY_PRINTK_DBGP=y
+
+    And you need to add the boot command line: "earlyprintk=dbgp".
+    (If you are using Grub, append it to the 'kernel' line in
+     /etc/grub.conf)
+
+    NOTE: normally earlyprintk console gets turned off once the
+    regular console is alive - use "earlyprintk=dbgp,keep" to keep
+    this channel open beyond early bootup. This can be useful for
+    debugging crashes under Xorg, etc.
+
+ b.) On the client/console system:
+
+    You should enable the following kernel config option:
+
+      CONFIG_USB_SERIAL_DEBUG=y
+
+    On the next bootup with the modified kernel you should
+    get a /dev/ttyUSBx device(s).
+
+    Now this channel of kernel messages is ready to be used: start
+    your favorite terminal emulator (minicom, etc.) and set
+    it up to use /dev/ttyUSB0 - or use a raw 'cat /dev/ttyUSBx' to
+    see the raw output.
+
+ c.) On Nvidia Southbridge based systems: the kernel will try to probe
+     and find out which port has debug device connected.
+
+3. Testing that it works fine:
+
+   You can test the output by using earlyprintk=dbgp,keep and provoking
+   kernel messages on the host/target system. You can provoke a harmless
+   kernel message by for example doing:
+
+     echo h > /proc/sysrq-trigger
+
+   On the host/target system you should see this help line in "dmesg" output:
+
+     SysRq : HELP : loglevel(0-9) reBoot Crashdump terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
+
+   On the client/console system do:
+
+       cat /dev/ttyUSB0
+
+   And you should see the help line above displayed shortly after you've
+   provoked it on the host system.
+
+If it does not work then please ask about it on the linux-kernel@vger.kernel.org
+mailing list or contact the x86 maintainers.
--- a/19
+++ b/19
@ -1469,8 +1469,6 @@ L:	linux-acpi@vger.kernel.org
 S:	Supported

 DOCUMENTATION (/Documentation directory)
-P:	Michael Kerrisk
-M:	mtk.manpages@gmail.com
 P:	Randy Dunlap
 M:	rdunlap@xenotime.net
 L:	linux-doc@vger.kernel.org
@ -2879,7 +2877,7 @@ P:	Michael Kerrisk
 M:	mtk.manpages@gmail.com
 W:	http://www.kernel.org/doc/man-pages
 L:	linux-man@vger.kernel.org
-S:	Supported
+S:	Maintained

 MARVELL LIBERTAS WIRELESS DRIVER
 P:	Dan Williams
@ -3352,10 +3350,8 @@ S:	Maintained
 PARISC ARCHITECTURE
 P:	Kyle McMartin
 M:	kyle@mcmartin.ca
-P:	Matthew Wilcox
-M:	matthew@wil.cx
-P:	Grant Grundler
-M:	grundler@parisc-linux.org
+P:	Helge Deller
+M:	deller@gmx.de
 L:	linux-parisc@vger.kernel.org
 W:	http://www.parisc-linux.org/
 T:	git kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
@ -3880,6 +3876,15 @@ L:	linux-ide@vger.kernel.org
 T:	git kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
 S:	Supported

+SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
+P:	Sathya Perla
+M:	sathyap@serverengines.com
+P:      Subbu Seetharaman
+M:      subbus@serverengines.com
+L:      netdev@vger.kernel.org
+W:      http://www.serverengines.com
+S:      Supported
+
 SFC NETWORK DRIVER
 P:	Steve Hodgson
 P:	Ben Hutchings
--- a/20
+++ b/20
@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 29
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc8
 NAME = Erotic Pickled Herring

 # *DOCUMENTATION*
@ -905,12 +905,18 @@ localver = $(subst $(space),, $(string) \
 # and if the SCM is know a tag from the SCM is appended.
 # The appended tag is determined by the SCM used.
 #
-# Currently, only git is supported.
-# Other SCMs can edit scripts/setlocalversion and add the appropriate
-# checks as needed.
+# .scmversion is used when generating rpm packages so we do not loose
+# the version information from the SCM when we do the build of the kernel
+# from the copied source
 ifdef CONFIG_LOCALVERSION_AUTO
-	_localver-auto = $(shell $(CONFIG_SHELL) \
-	                  $(srctree)/scripts/setlocalversion $(srctree))
+
+ifeq ($(wildcard .scmversion),)
+        _localver-auto = $(shell $(CONFIG_SHELL) \
+                         $(srctree)/scripts/setlocalversion $(srctree))
+else
+        _localver-auto = $(shell cat .scmversion 2> /dev/null)
+endif
+
 	localver-auto  = $(LOCALVERSION)$(_localver-auto)
 endif

@ -1538,7 +1544,7 @@ quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
      cmd_depmod = \
 	if [ -r System.map -a -x $(DEPMOD) ]; then                              \
 		$(DEPMOD) -ae -F System.map                                     \
-		$(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) -r)   \
+		$(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) )     \
 		$(KERNELRELEASE);                                               \
 	fi

--- a/arch/alpha/mm/init.c
+++ b/arch/alpha/mm/init.c
@ -189,9 +189,21 @@ callback_init(void * kernel_end)

 	if (alpha_using_srm) {
 		static struct vm_struct console_remap_vm;
-		unsigned long vaddr = VMALLOC_START;
+		unsigned long nr_pages = 0;
+		unsigned long vaddr;
 		unsigned long i, j;

+		/* calculate needed size */
+		for (i = 0; i < crb->map_entries; ++i)
+			nr_pages += crb->map[i].count;
+
+		/* register the vm area */
+		console_remap_vm.flags = VM_ALLOC;
+		console_remap_vm.size = nr_pages << PAGE_SHIFT;
+		vm_area_register_early(&console_remap_vm, PAGE_SIZE);
+
+		vaddr = (unsigned long)console_remap_vm.addr;
+
 		/* Set up the third level PTEs and update the virtual
 		   addresses of the CRB entries.  */
 		for (i = 0; i < crb->map_entries; ++i) {
@ -213,12 +225,6 @@ callback_init(void * kernel_end)
 				vaddr += PAGE_SIZE;
 			}
 		}
-
-		/* Let vmalloc know that we've allocated some space.  */
-		console_remap_vm.flags = VM_ALLOC;
-		console_remap_vm.addr = (void *) VMALLOC_START;
-		console_remap_vm.size = vaddr - VMALLOC_START;
-		vmlist = &console_remap_vm;
 	}

 	callback_init_done = 1;
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@ -111,6 +111,7 @@ ENTRY(mcount)
 	.globl mcount_call
 mcount_call:
 	bl ftrace_stub
+	ldr lr, [fp, #-4]			@ restore lr
 	ldmia sp!, {r0-r3, pc}

 ENTRY(ftrace_caller)
@ -122,6 +123,7 @@ ENTRY(ftrace_caller)
 	.globl ftrace_call
 ftrace_call:
 	bl ftrace_stub
+	ldr lr, [fp, #-4]			@ restore lr
 	ldmia sp!, {r0-r3, pc}

 #else
@ -133,6 +135,7 @@ ENTRY(mcount)
 	adr r0, ftrace_stub
 	cmp r0, r2
 	bne trace
+	ldr lr, [fp, #-4]			@ restore lr
 	ldmia sp!, {r0-r3, pc}

 trace:
@ -141,6 +144,7 @@ trace:
 	sub r0, r0, #MCOUNT_INSN_SIZE
 	mov lr, pc
 	mov pc, r2
+	mov lr, r1				@ restore lr
 	ldmia sp!, {r0-r3, pc}

 #endif /* CONFIG_DYNAMIC_FTRACE */
--- a/arch/arm/kernel/fiq.c
+++ b/arch/arm/kernel/fiq.c
@ -88,7 +88,7 @@ void set_fiq_handler(void *start, unsigned int length)
 * disable irqs for the duration.  Note - these functions are almost
 * entirely coded in assembly.
 */
-void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs)
+void __naked set_fiq_regs(struct pt_regs *regs)
 {
 	register unsigned long tmp;
 	asm volatile (
@ -106,7 +106,7 @@ void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs)
 	: "r" (&regs->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
 }

-void __attribute__((naked)) get_fiq_regs(struct pt_regs *regs)
+void __naked get_fiq_regs(struct pt_regs *regs)
 {
 	register unsigned long tmp;
 	asm volatile (
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@ -233,12 +233,13 @@ static void __init cacheid_init(void)
 	unsigned int cachetype = read_cpuid_cachetype();
 	unsigned int arch = cpu_architecture();

-	if (arch >= CPU_ARCH_ARMv7) {
-		cacheid = CACHEID_VIPT_NONALIASING;
-		if ((cachetype & (3 << 14)) == 1 << 14)
-			cacheid |= CACHEID_ASID_TAGGED;
-	} else if (arch >= CPU_ARCH_ARMv6) {
-		if (cachetype & (1 << 23))
+	if (arch >= CPU_ARCH_ARMv6) {
+		if ((cachetype & (7 << 29)) == 4 << 29) {
+			/* ARMv7 register format */
+			cacheid = CACHEID_VIPT_NONALIASING;
+			if ((cachetype & (3 << 14)) == 1 << 14)
+				cacheid |= CACHEID_ASID_TAGGED;
+		} else if (cachetype & (1 << 23))
 			cacheid = CACHEID_VIPT_ALIASING;
 		else
 			cacheid = CACHEID_VIPT_NONALIASING;
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@ -64,6 +64,7 @@ SECTIONS
 		__initramfs_end = .;
 #endif
 		. = ALIGN(4096);
+		__per_cpu_load = .;
 		__per_cpu_start = .;
 			*(.data.percpu.page_aligned)
 			*(.data.percpu)
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@ -347,6 +347,111 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif

+/* --------------------------------------------------------------------
+ *  Compact Flash (PCMCIA or IDE)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \
+    defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+
+static struct at91_cf_data cf0_data;
+
+static struct resource cf0_resources[] = {
+	[0] = {
+		.start	= AT91_CHIPSELECT_4,
+		.end	= AT91_CHIPSELECT_4 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+	}
+};
+
+static struct platform_device cf0_device = {
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &cf0_data,
+	},
+	.resource	= cf0_resources,
+	.num_resources	= ARRAY_SIZE(cf0_resources),
+};
+
+static struct at91_cf_data cf1_data;
+
+static struct resource cf1_resources[] = {
+	[0] = {
+		.start	= AT91_CHIPSELECT_5,
+		.end	= AT91_CHIPSELECT_5 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+	}
+};
+
+static struct platform_device cf1_device = {
+	.id		= 1,
+	.dev		= {
+				.platform_data	= &cf1_data,
+	},
+	.resource	= cf1_resources,
+	.num_resources	= ARRAY_SIZE(cf1_resources),
+};
+
+void __init at91_add_device_cf(struct at91_cf_data *data)
+{
+	unsigned long ebi0_csa;
+	struct platform_device *pdev;
+
+	if (!data)
+		return;
+
+	/*
+	 * assign CS4 or CS5 to SMC with Compact Flash logic support,
+	 * we assume SMC timings are configured by board code,
+	 * except True IDE where timings are controlled by driver
+	 */
+	ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+	switch (data->chipselect) {
+	case 4:
+		at91_set_A_periph(AT91_PIN_PD6, 0);  /* EBI0_NCS4/CFCS0 */
+		ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1;
+		cf0_data = *data;
+		pdev = &cf0_device;
+		break;
+	case 5:
+		at91_set_A_periph(AT91_PIN_PD7, 0);  /* EBI0_NCS5/CFCS1 */
+		ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2;
+		cf1_data = *data;
+		pdev = &cf1_device;
+		break;
+	default:
+		printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
+		       data->chipselect);
+		return;
+	}
+	at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
+
+	if (data->det_pin) {
+		at91_set_gpio_input(data->det_pin, 1);
+		at91_set_deglitch(data->det_pin, 1);
+	}
+
+	if (data->irq_pin) {
+		at91_set_gpio_input(data->irq_pin, 1);
+		at91_set_deglitch(data->irq_pin, 1);
+	}
+
+	if (data->vcc_pin)
+		/* initially off */
+		at91_set_gpio_output(data->vcc_pin, 0);
+
+	/* enable EBI controlled pins */
+	at91_set_A_periph(AT91_PIN_PD5, 1);  /* NWAIT */
+	at91_set_A_periph(AT91_PIN_PD8, 0);  /* CFCE1 */
+	at91_set_A_periph(AT91_PIN_PD9, 0);  /* CFCE2 */
+	at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
+
+	pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf";
+	platform_device_register(pdev);
+}
+#else
+void __init at91_add_device_cf(struct at91_cf_data *data) {}
+#endif

 /* --------------------------------------------------------------------
 *  NAND / SmartMedia
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@ -56,6 +56,9 @@ struct at91_cf_data {
 	u8	vcc_pin;		/* power switching */
 	u8	rst_pin;		/* card reset */
 	u8	chipselect;		/* EBI Chip Select number */
+	u8	flags;
+#define AT91_CF_TRUE_IDE	0x01
+#define AT91_IDE_SWAP_A0_A2	0x02
 };
 extern void __init at91_add_device_cf(struct at91_cf_data *data);

--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@ -332,7 +332,6 @@ static int at91_pm_enter(suspend_state_t state)
 			at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));

 error:
-	sdram_selfrefresh_disable();
 	target_state = PM_SUSPEND_ON;
 	at91_irq_resume();
 	at91_gpio_resume();
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@ -4,6 +4,8 @@

 #ifndef __ASSEMBLY__

+struct i2c_board_info;
+
 struct ep93xx_eth_data
 {
 	unsigned char	dev_addr[6];
--- a/arch/arm/mach-mx1/devices.c
+++ b/arch/arm/mach-mx1/devices.c
@ -23,6 +23,8 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+
+#include <mach/irqs.h>
 #include <mach/hardware.h>

 static struct resource imx_csi_resources[] = {
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@ -21,6 +21,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>

+#include <mach/irqs.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@ -81,7 +81,7 @@ static inline void __init ldp_init_smc911x(void)
 	}

 	ldp_smc911x_resources[0].start = cs_mem_base + 0x0;
-	ldp_smc911x_resources[0].end   = cs_mem_base + 0xf;
+	ldp_smc911x_resources[0].end   = cs_mem_base + 0xff;
 	udelay(100);

 	eth_gpio = LDP_SMC911X_GPIO;
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@ -178,7 +178,9 @@ static int __init omap3_beagle_i2c_init(void)
 #ifdef CONFIG_I2C2_OMAP_BEAGLE
 	omap_register_i2c_bus(2, 400, NULL, 0);
 #endif
-	omap_register_i2c_bus(3, 400, NULL, 0);
+	/* Bus 3 is attached to the DVI port where devices like the pico DLP
+	 * projector don't work reliably with 400kHz */
+	omap_register_i2c_bus(3, 100, NULL, 0);
 	return 0;
 }

--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@ -431,6 +431,10 @@ void __init orion5x_uart1_init(void)
 /*****************************************************************************
 * XOR engine
 ****************************************************************************/
+struct mv_xor_platform_shared_data orion5x_xor_shared_data = {
+	.dram		= &orion5x_mbus_dram_info,
+};
+
 static struct resource orion5x_xor_shared_resources[] = {
 	{
 		.name	= "xor low",
@ -448,6 +452,9 @@ static struct resource orion5x_xor_shared_resources[] = {
 static struct platform_device orion5x_xor_shared = {
 	.name		= MV_XOR_SHARED_NAME,
 	.id		= 0,
+	.dev		= {
+		.platform_data	= &orion5x_xor_shared_data,
+	},
 	.num_resources	= ARRAY_SIZE(orion5x_xor_shared_resources),
 	.resource	= orion5x_xor_shared_resources,
 };
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@ -129,7 +129,7 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 };

-struct map_desc smdk6410_iodesc[] = {};
+static struct map_desc smdk6410_iodesc[] = {};

 static struct platform_device *smdk6410_devices[] __initdata = {
 #ifdef CONFIG_SMDK6410_SD_CH0
@ -146,7 +146,7 @@ static struct platform_device *smdk6410_devices[] __initdata = {

 static struct i2c_board_info i2c_devs0[] __initdata = {
 	{ I2C_BOARD_INFO("24c08", 0x50), },
-	{ I2C_BOARD_INFO("WM8580", 0X1b), },
+	{ I2C_BOARD_INFO("wm8580", 0x1b), },
 };

 static struct i2c_board_info i2c_devs1[] __initdata = {
--- a/arch/arm/mm/abort-ev6.S
+++ b/arch/arm/mm/abort-ev6.S
@ -23,7 +23,8 @@ ENTRY(v6_early_abort)
 #ifdef CONFIG_CPU_32v6K
 	clrex
 #else
-	strex	r0, r1, [sp]			@ Clear the exclusive monitor
+	sub	r1, sp, #4			@ Get unused stack location
+	strex	r0, r1, [r1]			@ Clear the exclusive monitor
 #endif
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
--- a/arch/arm/mm/copypage-feroceon.c
+++ b/arch/arm/mm/copypage-feroceon.c
@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/highmem.h>

-static void __attribute__((naked))
+static void __naked
 feroceon_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\
--- a/arch/arm/mm/copypage-v3.c
+++ b/arch/arm/mm/copypage-v3.c
@ -15,7 +15,7 @@
 *
 * FIXME: do we need to handle cache stuff...
 */
-static void __attribute__((naked))
+static void __naked
 v3_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\n\
--- a/arch/arm/mm/copypage-v4mc.c
+++ b/arch/arm/mm/copypage-v4mc.c
@ -44,7 +44,7 @@ static DEFINE_SPINLOCK(minicache_lock);
 * instruction.  If your processor does not supply this, you have to write your
 * own copy_user_highpage that does the right thing.
 */
-static void __attribute__((naked))
+static void __naked
 mc_copy_user_page(void *from, void *to)
 {
 	asm volatile(
--- a/arch/arm/mm/copypage-v4wb.c
+++ b/arch/arm/mm/copypage-v4wb.c
@ -22,7 +22,7 @@
 * instruction.  If your processor does not supply this, you have to write your
 * own copy_user_highpage that does the right thing.
 */
-static void __attribute__((naked))
+static void __naked
 v4wb_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\
--- a/arch/arm/mm/copypage-v4wt.c
+++ b/arch/arm/mm/copypage-v4wt.c
@ -20,7 +20,7 @@
 * dirty data in the cache.  However, we do have to ensure that
 * subsequent reads are up to date.
 */
-static void __attribute__((naked))
+static void __naked
 v4wt_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\
--- a/arch/arm/mm/copypage-xsc3.c
+++ b/arch/arm/mm/copypage-xsc3.c
@ -29,7 +29,7 @@
 * if we eventually end up using our copied page.
 *
 */
-static void __attribute__((naked))
+static void __naked
 xsc3_mc_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\
--- a/arch/arm/mm/copypage-xscale.c
+++ b/arch/arm/mm/copypage-xscale.c
@ -42,7 +42,7 @@ static DEFINE_SPINLOCK(minicache_lock);
 * Dcache aliasing issue.  The writes will be forwarded to the write buffer,
 * and merged as appropriate.
 */
-static void __attribute__((naked))
+static void __naked
 mc_copy_user_page(void *from, void *to)
 {
 	/*
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@ -490,26 +490,30 @@ core_initcall(consistent_init);
 */
 void dma_cache_maint(const void *start, size_t size, int direction)
 {
-	const void *end = start + size;
+	void (*inner_op)(const void *, const void *);
+	void (*outer_op)(unsigned long, unsigned long);

-	BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(end - 1));
+	BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(start + size - 1));

 	switch (direction) {
 	case DMA_FROM_DEVICE:		/* invalidate only */
-		dmac_inv_range(start, end);
-		outer_inv_range(__pa(start), __pa(end));
+		inner_op = dmac_inv_range;
+		outer_op = outer_inv_range;
 		break;
 	case DMA_TO_DEVICE:		/* writeback only */
-		dmac_clean_range(start, end);
-		outer_clean_range(__pa(start), __pa(end));
+		inner_op = dmac_clean_range;
+		outer_op = outer_clean_range;
 		break;
 	case DMA_BIDIRECTIONAL:		/* writeback and invalidate */
-		dmac_flush_range(start, end);
-		outer_flush_range(__pa(start), __pa(end));
+		inner_op = dmac_flush_range;
+		outer_op = outer_flush_range;
 		break;
 	default:
 		BUG();
 	}
+
+	inner_op(start, start + size);
+	outer_op(__pa(start), __pa(start) + size);
 }
 EXPORT_SYMBOL(dma_cache_maint);

--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@ -382,7 +382,7 @@ void __init bootmem_init(void)
 	for_each_node(node)
 		bootmem_free_node(node, mi);

-	high_memory = __va(memend_pfn << PAGE_SHIFT);
+	high_memory = __va((memend_pfn << PAGE_SHIFT) - 1) + 1;

 	/*
 	 * This doesn't seem to be used by the Linux memory manager any
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@ -124,7 +124,7 @@ int valid_phys_addr_range(unsigned long addr, size_t size)
 {
 	if (addr < PHYS_OFFSET)
 		return 0;
-	if (addr + size > __pa(high_memory))
+	if (addr + size >= __pa(high_memory - 1))
 		return 0;

 	return 1;
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@ -18,7 +18,8 @@ obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
 obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
 obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
-obj-$(CONFIG_I2C_OMAP) += i2c.o
+i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
+obj-y += $(i2c-omap-m) $(i2c-omap-y)

 # OMAP mailbox framework
 obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@ -199,21 +199,17 @@ static struct clocksource clocksource_32k = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };

-/*
- * Rounds down to nearest nsec.
- */
-unsigned long long omap_32k_ticks_to_nsecs(unsigned long ticks_32k)
-{
-	return cyc2ns(&clocksource_32k, ticks_32k);
-}
-
 /*
 * Returns current time from boot in nsecs. It's OK for this to wrap
 * around for now, as it's just a relative time stamp.
 */
 unsigned long long sched_clock(void)
 {
-	return omap_32k_ticks_to_nsecs(omap_32k_read());
+	unsigned long long ret;
+
+	ret = (unsigned long long)omap_32k_read();
+	ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
+	return ret;
 }

 static int __init omap_init_clocksource_32k(void)
--- a/arch/arm/plat-omap/include/mach/common.h
+++ b/arch/arm/plat-omap/include/mach/common.h
@ -35,7 +35,7 @@ extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
 extern void omap_serial_init(void);
 extern void omap_serial_enable_clocks(int enable);
-#ifdef CONFIG_I2C_OMAP
+#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
 extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
 				 struct i2c_board_info const *info,
 				 unsigned len);
--- a/arch/arm/plat-omap/include/mach/pm.h
+++ b/arch/arm/plat-omap/include/mach/pm.h
@ -108,7 +108,7 @@
 	!defined(CONFIG_ARCH_OMAP15XX) && \
 	!defined(CONFIG_ARCH_OMAP16XX) && \
 	!defined(CONFIG_ARCH_OMAP24XX)
-#error "Power management for this processor not implemented yet"
+#warning "Power management for this processor not implemented yet"
 #endif

 #ifndef __ASSEMBLER__
--- a/arch/arm/plat-s3c64xx/clock.c
+++ b/arch/arm/plat-s3c64xx/clock.c
@ -248,7 +248,7 @@ static struct clk *clks[] __initdata = {
 	&clk_48m,
 };

-void s3c64xx_register_clocks(void)
+void __init s3c64xx_register_clocks(void)
 {
 	struct clk *clkp;
 	int ret;
--- a/arch/arm/plat-s3c64xx/gpiolib.c
+++ b/arch/arm/plat-s3c64xx/gpiolib.c
@ -417,4 +417,4 @@ static __init int s3c64xx_gpiolib_init(void)
 	return 0;
 }

-arch_initcall(s3c64xx_gpiolib_init);
+core_initcall(s3c64xx_gpiolib_init);
--- a/arch/arm/plat-s3c64xx/include/plat/irqs.h
+++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h
@ -117,7 +117,7 @@
 #define IRQ_ONENAND1		S3C64XX_IRQ_VIC1(12)
 #define IRQ_NFC			S3C64XX_IRQ_VIC1(13)
 #define IRQ_CFCON		S3C64XX_IRQ_VIC1(14)
-#define IRQ_UHOST		S3C64XX_IRQ_VIC1(15)
+#define IRQ_USBH		S3C64XX_IRQ_VIC1(15)
 #define IRQ_SPI0		S3C64XX_IRQ_VIC1(16)
 #define IRQ_SPI1		S3C64XX_IRQ_VIC1(17)
 #define IRQ_IIC			S3C64XX_IRQ_VIC1(18)
--- a/arch/arm/plat-s3c64xx/irq-eint.c
+++ b/arch/arm/plat-s3c64xx/irq-eint.c
@ -14,12 +14,15 @@

 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/io.h>

 #include <asm/hardware/vic.h>

 #include <plat/regs-irqtype.h>
+#include <plat/regs-gpio.h>
+#include <plat/gpio-cfg.h>

 #include <mach/map.h>
 #include <plat/cpu.h>
@ -55,7 +58,7 @@ static void s3c_irq_eint_unmask(unsigned int irq)
 	u32 mask;

 	mask = __raw_readl(S3C64XX_EINT0MASK);
-	mask |= eint_irq_to_bit(irq);
+	mask &= ~eint_irq_to_bit(irq);
 	__raw_writel(mask, S3C64XX_EINT0MASK);
 }

@ -74,6 +77,7 @@ static void s3c_irq_eint_maskack(unsigned int irq)
 static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
 {
 	int offs = eint_offset(irq);
+	int pin;
 	int shift;
 	u32 ctrl, mask;
 	u32 newvalue = 0;
@ -125,6 +129,15 @@ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
 	ctrl |= newvalue << shift;
 	__raw_writel(ctrl, reg);

+	/* set the GPIO pin appropriately */
+
+	if (offs < 23)
+		pin = S3C64XX_GPN(offs);
+	else
+		pin = S3C64XX_GPM(offs - 23);
+
+	s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(2));
+
 	return 0;
 }

@ -181,7 +194,7 @@ static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc)
 	s3c_irq_demux_eint(20, 27);
 }

-int __init s3c64xx_init_irq_eint(void)
+static int __init s3c64xx_init_irq_eint(void)
 {
 	int irq;

--- a/arch/arm/plat-s3c64xx/irq.c
+++ b/arch/arm/plat-s3c64xx/irq.c
@ -207,7 +207,7 @@ static struct irq_chip s3c_irq_uart = {

 static void __init s3c64xx_uart_irq(struct uart_irq *uirq)
 {
-	void *reg_base = uirq->regs;
+	void __iomem *reg_base = uirq->regs;
 	unsigned int irq;
 	int offs;

--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@ -36,7 +36,7 @@
 * ext_xtal_mux for want of an actual name from the manual.
 */

-struct clk clk_ext_xtal_mux = {
+static struct clk clk_ext_xtal_mux = {
 	.name		= "ext_xtal",
 	.id		= -1,
 };
@ -63,7 +63,7 @@ struct clksrc_clk {
 	void __iomem		*reg_divider;
 };

-struct clk clk_fout_apll = {
+static struct clk clk_fout_apll = {
 	.name		= "fout_apll",
 	.id		= -1,
 };
@ -78,7 +78,7 @@ static struct clk_sources clk_src_apll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
 };

-struct clksrc_clk clk_mout_apll = {
+static struct clksrc_clk clk_mout_apll = {
 	.clk	= {
 		.name		= "mout_apll",
 		.id		= -1,
@ -88,7 +88,7 @@ struct clksrc_clk clk_mout_apll = {
 	.sources	= &clk_src_apll,
 };

-struct clk clk_fout_epll = {
+static struct clk clk_fout_epll = {
 	.name		= "fout_epll",
 	.id		= -1,
 };
@ -103,7 +103,7 @@ static struct clk_sources clk_src_epll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
 };

-struct clksrc_clk clk_mout_epll = {
+static struct clksrc_clk clk_mout_epll = {
 	.clk	= {
 		.name		= "mout_epll",
 		.id		= -1,
@ -123,7 +123,7 @@ static struct clk_sources clk_src_mpll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
 };

-struct clksrc_clk clk_mout_mpll = {
+static struct clksrc_clk clk_mout_mpll = {
 	.clk = {
 		.name		= "mout_mpll",
 		.id		= -1,
@ -145,7 +145,7 @@ static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
 	return rate;
 }

-struct clk clk_dout_mpll = {
+static struct clk clk_dout_mpll = {
 	.name		= "dout_mpll",
 	.id		= -1,
 	.parent		= &clk_mout_mpll.clk,
@ -189,10 +189,10 @@ static struct clk_sources clkset_uart = {
 };

 static struct clk *clkset_uhost_list[] = {
+	&clk_48m,
 	&clk_mout_epll.clk,
 	&clk_dout_mpll,
 	&clk_fin_epll,
-	&clk_48m,
 };

 static struct clk_sources clkset_uhost = {
@ -239,10 +239,12 @@ static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate)

 	rate = clk_round_rate(clk, rate);
 	div = clk_get_rate(clk->parent) / rate;
+	if (div > 16)
+		return -EINVAL;

 	val = __raw_readl(reg);
-	val &= ~sclk->mask;
-	val |= (rate - 1) << sclk->shift;
+	val &= ~(0xf << sclk->shift);
+	val |= (div - 1) << sclk->shift;
 	__raw_writel(val, reg);

 	return 0;
@ -351,7 +353,7 @@ static struct clksrc_clk clk_mmc2 = {

 static struct clksrc_clk clk_usbhost = {
 	.clk	= {
-		.name		= "usb-host-bus",
+		.name		= "usb-bus-host",
 		.id		= -1,
 		.ctrlbit        = S3C_CLKCON_SCLK_UHOST,
 		.enable		= s3c64xx_sclk_ctrl,
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sun Nov 30 16:39:36 2008
+# Last update: Thu Mar 12 18:01:45 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@ -1811,7 +1811,7 @@ pilz_pmi5		MACH_PILZ_PMI5		PILZ_PMI5		1820
 jade			MACH_JADE		JADE			1821
 ks8695_softplc		MACH_KS8695_SOFTPLC	KS8695_SOFTPLC		1822
 gprisc3			MACH_GPRISC3		GPRISC3			1823
-stamp9260		MACH_STAMP9260		STAMP9260		1824
+stamp9g20		MACH_STAMP9G20		STAMP9G20		1824
 smdk6430		MACH_SMDK6430		SMDK6430		1825
 smdkc100		MACH_SMDKC100		SMDKC100		1826
 tavorevb		MACH_TAVOREVB		TAVOREVB		1827
@ -1993,4 +1993,134 @@ spark			MACH_SPARK		SPARK			2002
 benzina			MACH_BENZINA		BENZINA			2003
 blaze			MACH_BLAZE		BLAZE			2004
 linkstation_ls_hgl	MACH_LINKSTATION_LS_HGL	LINKSTATION_LS_HGL	2005
-htcvenus		MACH_HTCVENUS		HTCVENUS		2006
+htckovsky		MACH_HTCVENUS		HTCVENUS		2006
+sony_prs505		MACH_SONY_PRS505	SONY_PRS505		2007
+hanlin_v3		MACH_HANLIN_V3		HANLIN_V3		2008
+sapphira		MACH_SAPPHIRA		SAPPHIRA		2009
+dack_sda_01		MACH_DACK_SDA_01	DACK_SDA_01		2010
+armbox			MACH_ARMBOX		ARMBOX			2011
+harris_rvp		MACH_HARRIS_RVP		HARRIS_RVP		2012
+ribaldo			MACH_RIBALDO		RIBALDO			2013
+agora			MACH_AGORA		AGORA			2014
+omap3_mini		MACH_OMAP3_MINI		OMAP3_MINI		2015
+a9sam6432_b		MACH_A9SAM6432_B	A9SAM6432_B		2016
+usg2410			MACH_USG2410		USG2410			2017
+pc72052_i10_revb	MACH_PC72052_I10_REVB	PC72052_I10_REVB	2018
+mx35_exm32		MACH_MX35_EXM32		MX35_EXM32		2019
+topas910		MACH_TOPAS910		TOPAS910		2020
+hyena			MACH_HYENA		HYENA			2021
+pospax			MACH_POSPAX		POSPAX			2022
+hdl_gx			MACH_HDL_GX		HDL_GX			2023
+ctera_4bay		MACH_CTERA_4BAY		CTERA_4BAY		2024
+ctera_plug_c		MACH_CTERA_PLUG_C	CTERA_PLUG_C		2025
+crwea_plug_i		MACH_CRWEA_PLUG_I	CRWEA_PLUG_I		2026
+egauge2			MACH_EGAUGE2		EGAUGE2			2027
+didj			MACH_DIDJ		DIDJ			2028
+m_s3c2443		MACH_MEISTER		MEISTER			2029
+htcblackstone		MACH_HTCBLACKSTONE	HTCBLACKSTONE		2030
+cpuat9g20		MACH_CPUAT9G20		CPUAT9G20		2031
+smdk6440		MACH_SMDK6440		SMDK6440		2032
+omap_35xx_mvp		MACH_OMAP_35XX_MVP	OMAP_35XX_MVP		2033
+ctera_plug_i		MACH_CTERA_PLUG_I	CTERA_PLUG_I		2034
+pvg610_100		MACH_PVG610		PVG610			2035
+hprw6815		MACH_HPRW6815		HPRW6815		2036
+omap3_oswald		MACH_OMAP3_OSWALD	OMAP3_OSWALD		2037
+nas4220b		MACH_NAS4220B		NAS4220B		2038
+htcraphael_cdma		MACH_HTCRAPHAEL_CDMA	HTCRAPHAEL_CDMA		2039
+htcdiamond_cdma		MACH_HTCDIAMOND_CDMA	HTCDIAMOND_CDMA		2040
+scaler			MACH_SCALER		SCALER			2041
+zylonite2		MACH_ZYLONITE2		ZYLONITE2		2042
+aspenite		MACH_ASPENITE		ASPENITE		2043
+teton			MACH_TETON		TETON			2044
+ttc_dkb			MACH_TTC_DKB		TTC_DKB			2045
+bishop2			MACH_BISHOP2		BISHOP2			2046
+ippv5			MACH_IPPV5		IPPV5			2047
+farm926			MACH_FARM926		FARM926			2048
+mmccpu			MACH_MMCCPU		MMCCPU			2049
+sgmsfl			MACH_SGMSFL		SGMSFL			2050
+tt8000			MACH_TT8000		TT8000			2051
+zrn4300lp		MACH_ZRN4300LP		ZRN4300LP		2052
+mptc			MACH_MPTC		MPTC			2053
+h6051			MACH_H6051		H6051			2054
+pvg610_101		MACH_PVG610_101		PVG610_101		2055
+stamp9261_pc_evb	MACH_STAMP9261_PC_EVB	STAMP9261_PC_EVB	2056
+pelco_odysseus		MACH_PELCO_ODYSSEUS	PELCO_ODYSSEUS		2057
+tny_a9260		MACH_TNY_A9260		TNY_A9260		2058
+tny_a9g20		MACH_TNY_A9G20		TNY_A9G20		2059
+aesop_mp2530f		MACH_AESOP_MP2530F	AESOP_MP2530F		2060
+dx900			MACH_DX900		DX900			2061
+cpodc2			MACH_CPODC2		CPODC2			2062
+tilt_8925		MACH_TILT_8925		TILT_8925		2063
+davinci_dm357_evm	MACH_DAVINCI_DM357_EVM	DAVINCI_DM357_EVM	2064
+swordfish		MACH_SWORDFISH		SWORDFISH		2065
+corvus			MACH_CORVUS		CORVUS			2066
+taurus			MACH_TAURUS		TAURUS			2067
+axm			MACH_AXM		AXM			2068
+axc			MACH_AXC		AXC			2069
+baby			MACH_BABY		BABY			2070
+mp200			MACH_MP200		MP200			2071
+pcm043			MACH_PCM043		PCM043			2072
+hanlin_v3c		MACH_HANLIN_V3C		HANLIN_V3C		2073
+kbk9g20			MACH_KBK9G20		KBK9G20			2074
+adsturbog5		MACH_ADSTURBOG5		ADSTURBOG5		2075
+avenger_lite1		MACH_AVENGER_LITE1	AVENGER_LITE1		2076
+suc82x			MACH_SUC		SUC			2077
+at91sam7s256		MACH_AT91SAM7S256	AT91SAM7S256		2078
+mendoza			MACH_MENDOZA		MENDOZA			2079
+kira			MACH_KIRA		KIRA			2080
+mx1hbm			MACH_MX1HBM		MX1HBM			2081
+quatro43xx		MACH_QUATRO43XX		QUATRO43XX		2082
+quatro4230		MACH_QUATRO4230		QUATRO4230		2083
+nsb400			MACH_NSB400		NSB400			2084
+drp255			MACH_DRP255		DRP255			2085
+thoth			MACH_THOTH		THOTH			2086
+firestone		MACH_FIRESTONE		FIRESTONE		2087
+asusp750		MACH_ASUSP750		ASUSP750		2088
+ctera_dl		MACH_CTERA_DL		CTERA_DL		2089
+socr			MACH_SOCR		SOCR			2090
+htcoxygen		MACH_HTCOXYGEN		HTCOXYGEN		2091
+heroc			MACH_HEROC		HEROC			2092
+zeno6800		MACH_ZENO6800		ZENO6800		2093
+sc2mcs			MACH_SC2MCS		SC2MCS			2094
+gene100			MACH_GENE100		GENE100			2095
+as353x			MACH_AS353X		AS353X			2096
+sheevaplug		MACH_SHEEVAPLUG		SHEEVAPLUG		2097
+at91sam9g20		MACH_AT91SAM9G20	AT91SAM9G20		2098
+mv88f6192gtw_fe		MACH_MV88F6192GTW_FE	MV88F6192GTW_FE		2099
+cc9200			MACH_CC9200		CC9200			2100
+sm9200			MACH_SM9200		SM9200			2101
+tp9200			MACH_TP9200		TP9200			2102
+snapperdv		MACH_SNAPPERDV		SNAPPERDV		2103
+avengers_lite		MACH_AVENGERS_LITE	AVENGERS_LITE		2104
+avengers_lite1		MACH_AVENGERS_LITE1	AVENGERS_LITE1		2105
+omap3axon		MACH_OMAP3AXON		OMAP3AXON		2106
+ma8xx			MACH_MA8XX		MA8XX			2107
+mp201ek			MACH_MP201EK		MP201EK			2108
+davinci_tux		MACH_DAVINCI_TUX	DAVINCI_TUX		2109
+mpa1600			MACH_MPA1600		MPA1600			2110
+pelco_troy		MACH_PELCO_TROY		PELCO_TROY		2111
+nsb667			MACH_NSB667		NSB667			2112
+rovers5_4mpix		MACH_ROVERS5_4MPIX	ROVERS5_4MPIX		2113
+twocom			MACH_TWOCOM		TWOCOM			2114
+ubisys_p9_rcu3r2	MACH_UBISYS_P9_RCU3R2	UBISYS_P9_RCU3R2	2115
+hero_espresso		MACH_HERO_ESPRESSO	HERO_ESPRESSO		2116
+afeusb			MACH_AFEUSB		AFEUSB			2117
+t830			MACH_T830		T830			2118
+spd8020_cc		MACH_SPD8020_CC		SPD8020_CC		2119
+om_3d7k			MACH_OM_3D7K		OM_3D7K			2120
+picocom2		MACH_PICOCOM2		PICOCOM2		2121
+uwg4mx27		MACH_UWG4MX27		UWG4MX27		2122
+uwg4mx31		MACH_UWG4MX31		UWG4MX31		2123
+cherry			MACH_CHERRY		CHERRY			2124
+mx51_babbage		MACH_MX51_BABBAGE	MX51_BABBAGE		2125
+s3c2440turkiye		MACH_S3C2440TURKIYE	S3C2440TURKIYE		2126
+tx37			MACH_TX37		TX37			2127
+sbc2800_9g20		MACH_SBC2800_9G20	SBC2800_9G20		2128
+benzglb			MACH_BENZGLB		BENZGLB			2129
+benztd			MACH_BENZTD		BENZTD			2130
+cartesio_plus		MACH_CARTESIO_PLUS	CARTESIO_PLUS		2131
+solrad_g20		MACH_SOLRAD_G20		SOLRAD_G20		2132
+mx27wallace		MACH_MX27WALLACE	MX27WALLACE		2133
+fmzwebmodul		MACH_FMZWEBMODUL	FMZWEBMODUL		2134
+rd78x00_masa		MACH_RD78X00_MASA	RD78X00_MASA		2135
+smallogger		MACH_SMALLOGGER		SMALLOGGER		2136
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@ -181,7 +181,7 @@ source "kernel/Kconfig.preempt"
 config QUICKLIST
 	def_bool y

-config HAVE_ARCH_BOOTMEM_NODE
+config HAVE_ARCH_BOOTMEM
 	def_bool n

 config ARCH_HAVE_MEMORY_PRESENT
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@ -1129,6 +1129,7 @@ endchoice

 config PM_WAKEUP_BY_GPIO
 	bool "Allow Wakeup from Standby by GPIO"
+	depends on PM && !BF54x

 config PM_WAKEUP_GPIO_NUMBER
 	int "GPIO number"
@ -1168,6 +1169,12 @@ config PM_BFIN_WAKE_GP
 	default n
 	help
 	  Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
+	  (all processors, except ADSP-BF549). This option sets
+	  the general-purpose wake-up enable (GPWE) control bit to enable
+	  wake-up upon detection of an active low signal on the /GPW (PH7) pin.
+	  On ADSP-BF549 this option enables the the same functionality on the
+	  /MRXON pin also PH7.
+
 endmenu

 menu "CPU Frequency scaling"
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@ -21,12 +21,6 @@ config DEBUG_STACK_USAGE
 config HAVE_ARCH_KGDB
 	def_bool y

-config KGDB_TESTCASE
-	tristate "KGDB: for test case in expect"
-	default n
-	help
-	  This is a kgdb test case for automated testing.
-
 config DEBUG_VERBOSE
 	bool "Verbose fault messages"
 	default y
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Fri Jan  9 17:58:41 2009
+# Linux kernel version: 2.6.28
+# Fri Feb 20 10:01:44 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@ -133,10 +133,15 @@ CONFIG_BF518=y
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 # CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=0
 CONFIG_BF_REV_MAX=2
@ -426,7 +431,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
+CONFIG_NET_DSA=y
+# CONFIG_NET_DSA_TAG_DSA is not set
+# CONFIG_NET_DSA_TAG_EDSA is not set
+# CONFIG_NET_DSA_TAG_TRAILER is not set
+CONFIG_NET_DSA_TAG_STPID=y
+# CONFIG_NET_DSA_MV88E6XXX is not set
+# CONFIG_NET_DSA_MV88E6060 is not set
+# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
+# CONFIG_NET_DSA_MV88E6131 is not set
+# CONFIG_NET_DSA_MV88E6123_61_65 is not set
+CONFIG_NET_DSA_KSZ8893M=y
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@ -529,6 +544,8 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@ -561,7 +578,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set

@ -607,6 +626,7 @@ CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@ -764,7 +784,23 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@ -788,8 +824,10 @@ CONFIG_BFIN_WDT=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set

 #
 # Multimedia devices
@ -861,10 +899,18 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set

 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set

 #
 # Platform RTC drivers
@ -1062,12 +1108,20 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB_TESTCASE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
 # CONFIG_DEBUG_HWERR is not set
@ -1100,6 +1154,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@ -327,8 +327,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set

 #
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@ -290,8 +290,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set

 #
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@ -290,8 +290,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set

 #
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@ -298,8 +298,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set

 #
@ -568,15 +568,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_BFIN is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-CONFIG_MTD_NAND_PLATFORM=m
+# CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set

 #
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@ -306,8 +306,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set

 #
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@ -361,8 +361,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_BFIN_L2_CACHEABLE is not set
 # CONFIG_MPU is not set

@ -680,7 +680,7 @@ CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set

 #
 # SCSI support type (disk, tape, CD-ROM)
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@ -329,8 +329,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_BFIN_L2_CACHEABLE is not set
 # CONFIG_MPU is not set

--- a/arch/blackfin/configs/BlackStamp_defconfig
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@ -288,8 +288,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set

 #
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@ -332,8 +332,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set

 #
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@ -336,8 +336,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 CONFIG_L1_MAX_PIECE=16
 # CONFIG_MPU is not set

@ -595,7 +595,7 @@ CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set

 #
 # SCSI support type (disk, tape, CD-ROM)
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@ -612,7 +612,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_SCSI=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set

 #
 # SCSI support type (disk, tape, CD-ROM)
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@ -282,8 +282,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 CONFIG_L1_MAX_PIECE=16

 #
--- a/arch/blackfin/include/asm/Kbuild
+++ b/arch/blackfin/include/asm/Kbuild
@ -1,3 +1,4 @@
 include include/asm-generic/Kbuild.asm

+unifdef-y += bfin_sport.h
 unifdef-y += fixed_code.h
--- a/arch/blackfin/include/asm/bfin_sport.h
+++ b/arch/blackfin/include/asm/bfin_sport.h
@ -1,30 +1,9 @@
 /*
- * File:         include/asm-blackfin/bfin_sport.h
- * Based on:
- * Author:       Roy Huang (roy.huang@analog.com)
+ * bfin_sport.h - userspace header for bfin sport driver
 *
- * Created:      Thu Aug. 24 2006
- * Description:
+ * Copyright 2004-2008 Analog Devices Inc.
 *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
 */

 #ifndef __BFIN_SPORT_H__
@ -42,11 +21,10 @@
 #define NORM_FORMAT	0x0
 #define ALAW_FORMAT	0x2
 #define ULAW_FORMAT	0x3
-struct sport_register;

 /* Function driver which use sport must initialize the structure */
 struct sport_config {
-	/*TDM (multichannels), I2S or other mode */
+	/* TDM (multichannels), I2S or other mode */
 	unsigned int mode:3;

 	/* if TDM mode is selected, channels must be set */
@ -72,12 +50,18 @@ struct sport_config {
 	int serial_clk;
 	int fsync_clk;

-	unsigned int data_format:2;	/*Normal, u-law or a-law */
+	unsigned int data_format:2;	/* Normal, u-law or a-law */

 	int word_len;		/* How length of the word in bits, 3-32 bits */
 	int dma_enabled;
 };

+/* Userspace interface */
+#define SPORT_IOC_MAGIC		'P'
+#define SPORT_IOC_CONFIG	_IOWR('P', 0x01, struct sport_config)
+
+#ifdef __KERNEL__
+
 struct sport_register {
 	unsigned short tcr1;
 	unsigned short reserved0;
@ -117,9 +101,6 @@ struct sport_register {
 	unsigned long mrcs3;
 };

-#define SPORT_IOC_MAGIC		'P'
-#define SPORT_IOC_CONFIG	_IOWR('P', 0x01, struct sport_config)
-
 struct sport_dev {
 	struct cdev cdev;	/* Char device structure */

@ -149,6 +130,8 @@ struct sport_dev {
 	struct sport_config config;
 };

+#endif
+
 #define SPORT_TCR1	0
 #define	SPORT_TCR2	1
 #define	SPORT_TCLKDIV	2
@ -169,4 +152,4 @@ struct sport_dev {
 #define SPORT_MRCS2	22
 #define SPORT_MRCS3	23

-#endif				/*__BFIN_SPORT_H__*/
+#endif
--- a/arch/blackfin/include/asm/ipipe.h
+++ b/arch/blackfin/include/asm/ipipe.h
@ -35,9 +35,9 @@
 #include <asm/atomic.h>
 #include <asm/traps.h>

-#define IPIPE_ARCH_STRING     "1.8-00"
+#define IPIPE_ARCH_STRING     "1.9-00"
 #define IPIPE_MAJOR_NUMBER    1
-#define IPIPE_MINOR_NUMBER    8
+#define IPIPE_MINOR_NUMBER    9
 #define IPIPE_PATCH_NUMBER    0

 #ifdef CONFIG_SMP
@ -83,9 +83,9 @@ struct ipipe_sysinfo {
 				"%2 = CYCLES2\n"		\
 				"CC = %2 == %0\n"		\
 				"if ! CC jump 1b\n"		\
-				: "=r" (((unsigned long *)&t)[1]),	\
-				  "=r" (((unsigned long *)&t)[0]),	\
-				  "=r" (__cy2)				\
+				: "=d,a" (((unsigned long *)&t)[1]),	\
+				  "=d,a" (((unsigned long *)&t)[0]),	\
+				  "=d,a" (__cy2)				\
 				: /*no input*/ : "CC");			\
 	t;								\
 	})
@ -118,35 +118,40 @@ void __ipipe_disable_irqdesc(struct ipipe_domain *ipd,

 #define __ipipe_disable_irq(irq)	(irq_desc[irq].chip->mask(irq))

-#define __ipipe_lock_root()					\
-	set_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
+static inline int __ipipe_check_tickdev(const char *devname)
+{
+	return 1;
+}

-#define __ipipe_unlock_root()					\
-	clear_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
+static inline void __ipipe_lock_root(void)
+{
+	set_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
+}
+
+static inline void __ipipe_unlock_root(void)
+{
+	clear_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
+}

 void __ipipe_enable_pipeline(void);

 #define __ipipe_hook_critical_ipi(ipd) do { } while (0)

-#define __ipipe_sync_pipeline(syncmask)					\
-	do {								\
-		struct ipipe_domain *ipd = ipipe_current_domain;	\
-		if (likely(ipd != ipipe_root_domain || !test_bit(IPIPE_ROOTLOCK_FLAG, &ipd->flags))) \
-			__ipipe_sync_stage(syncmask);			\
-	} while (0)
+#define __ipipe_sync_pipeline  ___ipipe_sync_pipeline
+void ___ipipe_sync_pipeline(unsigned long syncmask);

 void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs);

 int __ipipe_get_irq_priority(unsigned irq);

-int __ipipe_get_irqthread_priority(unsigned irq);
-
 void __ipipe_stall_root_raw(void);

 void __ipipe_unstall_root_raw(void);

 void __ipipe_serial_debug(const char *fmt, ...);

+asmlinkage void __ipipe_call_irqtail(unsigned long addr);
+
 DECLARE_PER_CPU(struct pt_regs, __ipipe_tick_regs);

 extern unsigned long __ipipe_core_clock;
@ -162,42 +167,25 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul)

 #define __ipipe_run_irqtail()  /* Must be a macro */			\
 	do {								\
-		asmlinkage void __ipipe_call_irqtail(void);		\
 		unsigned long __pending;				\
-		CSYNC();					\
+		CSYNC();						\
 		__pending = bfin_read_IPEND();				\
 		if (__pending & 0x8000) {				\
 			__pending &= ~0x8010;				\
 			if (__pending && (__pending & (__pending - 1)) == 0) \
-				__ipipe_call_irqtail();			\
+				__ipipe_call_irqtail(__ipipe_irq_tail_hook); \
 		}							\
 	} while (0)

 #define __ipipe_run_isr(ipd, irq)					\
 	do {								\
 		if (ipd == ipipe_root_domain) {				\
-			/*						\
-			 * Note: the I-pipe implements a threaded interrupt model on \
-			 * this arch for Linux external IRQs. The interrupt handler we \
-			 * call here only wakes up the associated IRQ thread. \
-			 */						\
-			if (ipipe_virtual_irq_p(irq)) {			\
-				/* No irqtail here; virtual interrupts have no effect \
-				   on IPEND so there is no need for processing \
-				   deferral. */				\
-				local_irq_enable_nohead(ipd);		\
+			local_irq_enable_hw();				\
+			if (ipipe_virtual_irq_p(irq))			\
 				ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \
-				local_irq_disable_nohead(ipd);		\
-			} else						\
-				/*					\
-				 * No need to run the irqtail here either; \
-				 * we can't be preempted by hw IRQs, so	\
-				 * non-Linux IRQs cannot stack over the short \
-				 * thread wakeup code. Which in turn means \
-				 * that no irqtail condition could be pending \
-				 * for domains above Linux in the pipeline. \
-				 */					\
+			else						\
 				ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \
+			local_irq_disable_hw();				\
 		} else {						\
 			__clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
 			local_irq_enable_nohead(ipd);			\
@ -217,42 +205,24 @@ void ipipe_init_irq_threads(void);

 int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);

-#define IS_SYSIRQ(irq)		((irq) > IRQ_CORETMR && (irq) <= SYS_IRQS)
-#define IS_GPIOIRQ(irq)		((irq) >= GPIO_IRQ_BASE && (irq) < NR_IRQS)
-
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+#define IRQ_SYSTMR		IRQ_CORETMR
+#define IRQ_PRIOTMR		IRQ_CORETMR
+#else
 #define IRQ_SYSTMR		IRQ_TIMER0
 #define IRQ_PRIOTMR		CONFIG_IRQ_TIMER0
+#endif

-#if defined(CONFIG_BF531) || defined(CONFIG_BF532) || defined(CONFIG_BF533)
-#define PRIO_GPIODEMUX(irq)	CONFIG_PFA
-#elif defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
-#define PRIO_GPIODEMUX(irq)	CONFIG_IRQ_PROG_INTA
-#elif defined(CONFIG_BF52x)
-#define PRIO_GPIODEMUX(irq)	((irq) == IRQ_PORTF_INTA ? CONFIG_IRQ_PORTF_INTA : \
-				 (irq) == IRQ_PORTG_INTA ? CONFIG_IRQ_PORTG_INTA : \
-				 (irq) == IRQ_PORTH_INTA ? CONFIG_IRQ_PORTH_INTA : \
-				 -1)
-#elif defined(CONFIG_BF561)
-#define PRIO_GPIODEMUX(irq)	((irq) == IRQ_PROG0_INTA ? CONFIG_IRQ_PROG0_INTA : \
-				 (irq) == IRQ_PROG1_INTA ? CONFIG_IRQ_PROG1_INTA : \
-				 (irq) == IRQ_PROG2_INTA ? CONFIG_IRQ_PROG2_INTA : \
-				 -1)
+#ifdef CONFIG_BF561
 #define bfin_write_TIMER_DISABLE(val)	bfin_write_TMRS8_DISABLE(val)
 #define bfin_write_TIMER_ENABLE(val)	bfin_write_TMRS8_ENABLE(val)
 #define bfin_write_TIMER_STATUS(val)	bfin_write_TMRS8_STATUS(val)
 #define bfin_read_TIMER_STATUS()	bfin_read_TMRS8_STATUS()
 #elif defined(CONFIG_BF54x)
-#define PRIO_GPIODEMUX(irq)	((irq) == IRQ_PINT0 ? CONFIG_IRQ_PINT0 : \
-				 (irq) == IRQ_PINT1 ? CONFIG_IRQ_PINT1 : \
-				 (irq) == IRQ_PINT2 ? CONFIG_IRQ_PINT2 : \
-				 (irq) == IRQ_PINT3 ? CONFIG_IRQ_PINT3 : \
-				 -1)
 #define bfin_write_TIMER_DISABLE(val)	bfin_write_TIMER_DISABLE0(val)
 #define bfin_write_TIMER_ENABLE(val)	bfin_write_TIMER_ENABLE0(val)
 #define bfin_write_TIMER_STATUS(val)	bfin_write_TIMER_STATUS0(val)
 #define bfin_read_TIMER_STATUS(val)	bfin_read_TIMER_STATUS0(val)
-#else
-# error "no PRIO_GPIODEMUX() for this part"
 #endif

 #define __ipipe_root_tick_p(regs)	((regs->ipend & 0x10) != 0)
@ -275,4 +245,6 @@ int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);

 #endif /* !CONFIG_IPIPE */

+#define ipipe_update_tick_evtdev(evtdev)	do { } while (0)
+
 #endif	/* !__ASM_BLACKFIN_IPIPE_H */
--- a/arch/blackfin/include/asm/ipipe_base.h
+++ b/arch/blackfin/include/asm/ipipe_base.h
@ -1,5 +1,5 @@
 /*   -*- linux-c -*-
- *   include/asm-blackfin/_baseipipe.h
+ *   include/asm-blackfin/ipipe_base.h
 *
 *   Copyright (C) 2007 Philippe Gerum.
 *
@ -27,8 +27,9 @@
 #define IPIPE_NR_XIRQS		NR_IRQS
 #define IPIPE_IRQ_ISHIFT	5	/* 2^5 for 32bits arch. */

-/* Blackfin-specific, global domain flags */
-#define IPIPE_ROOTLOCK_FLAG	1	/* Lock pipeline for root */
+/* Blackfin-specific, per-cpu pipeline status */
+#define IPIPE_SYNCDEFER_FLAG	15
+#define IPIPE_SYNCDEFER_MASK	(1L << IPIPE_SYNCDEFER_MASK)

 /* Blackfin traps -- i.e. exception vector numbers */
 #define IPIPE_NR_FAULTS		52 /* We leave a gap after VEC_ILL_RES. */
@ -48,11 +49,6 @@

 #ifndef __ASSEMBLY__

-#include <linux/bitops.h>
-
-extern int test_bit(int nr, const void *addr);
-
-
 extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */

 static inline void __ipipe_stall_root(void)
--- a/arch/blackfin/include/asm/irq.h
+++ b/arch/blackfin/include/asm/irq.h
@ -61,20 +61,38 @@ void __ipipe_restore_root(unsigned long flags);
 #define raw_irqs_disabled_flags(flags)	(!irqs_enabled_from_flags_hw(flags))
 #define local_test_iflag_hw(x)		irqs_enabled_from_flags_hw(x)

-#define local_save_flags(x)						\
-	do {								\
-		(x) = __ipipe_test_root() ? \
+#define local_save_flags(x)					 \
+	do {							 \
+		(x) = __ipipe_test_root() ?			 \
 			__all_masked_irq_flags : bfin_irq_flags; \
+		barrier();					 \
 	} while (0)

-#define local_irq_save(x)				\
-	do {						\
-		(x) = __ipipe_test_and_stall_root();	\
+#define local_irq_save(x)					 \
+	do {						 	 \
+		(x) = __ipipe_test_and_stall_root() ?		 \
+			__all_masked_irq_flags : bfin_irq_flags; \
+		barrier();					 \
 	} while (0)

-#define local_irq_restore(x)	__ipipe_restore_root(x)
-#define local_irq_disable()	__ipipe_stall_root()
-#define local_irq_enable()	__ipipe_unstall_root()
+static inline void local_irq_restore(unsigned long x)
+{
+	barrier();
+	__ipipe_restore_root(x == __all_masked_irq_flags);
+}
+
+#define local_irq_disable()			\
+	do {					\
+		__ipipe_stall_root();		\
+		barrier();			\
+	} while (0)
+
+static inline void local_irq_enable(void)
+{
+	barrier();
+	__ipipe_unstall_root();
+}
+
 #define irqs_disabled()		__ipipe_test_root()

 #define local_save_flags_hw(x) \
--- a/arch/blackfin/include/asm/percpu.h
+++ b/arch/blackfin/include/asm/percpu.h
@ -3,14 +3,4 @@

 #include <asm-generic/percpu.h>

-#ifdef CONFIG_MODULES
-#define PERCPU_MODULE_RESERVE 8192
-#else
-#define PERCPU_MODULE_RESERVE 0
-#endif
-
-#define PERCPU_ENOUGH_ROOM \
-	(ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES) + \
-	 PERCPU_MODULE_RESERVE)
-
 #endif	/* __ARCH_BLACKFIN_PERCPU__ */
--- a/arch/blackfin/include/asm/thread_info.h
+++ b/arch/blackfin/include/asm/thread_info.h
@ -122,6 +122,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_MEMDIE              4
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
 #define TIF_FREEZE              6       /* is freezing for suspend */
+#define TIF_IRQ_SYNC            7       /* sync pipeline stage */

 /* as above, but as bit values */
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
@ -130,6 +131,7 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
 #define _TIF_FREEZE             (1<<TIF_FREEZE)
+#define _TIF_IRQ_SYNC           (1<<TIF_IRQ_SYNC)

 #define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */

--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@ -15,13 +15,15 @@ else
    obj-y += time.o
 endif

-CFLAGS_kgdb_test.o := -mlong-calls -O0
-
 obj-$(CONFIG_IPIPE)                  += ipipe.o
 obj-$(CONFIG_IPIPE_TRACE_MCOUNT)     += mcount.o
 obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o
 obj-$(CONFIG_CPLB_INFO)              += cplbinfo.o
 obj-$(CONFIG_MODULES)                += module.o
 obj-$(CONFIG_KGDB)                   += kgdb.o
-obj-$(CONFIG_KGDB_TESTCASE)          += kgdb_test.o
+obj-$(CONFIG_KGDB_TESTS)             += kgdb_test.o
 obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
+
+# the kgdb test puts code into L2 and without linker
+# relaxation, we need to force long calls to/from it
+CFLAGS_kgdb_test.o := -mlong-calls -O0
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@ -53,9 +53,13 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)

 	i_d = i_i = 0;

+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
 	/* Set up the zero page.  */
 	d_tbl[i_d].addr = 0;
 	d_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+	i_tbl[i_i].addr = 0;
+	i_tbl[i_i++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+#endif

 	/* Cover kernel memory with 4M pages.  */
 	addr = 0;
--- a/arch/blackfin/kernel/ipipe.c
+++ b/arch/blackfin/kernel/ipipe.c
@ -35,14 +35,8 @@
 #include <asm/atomic.h>
 #include <asm/io.h>

-static int create_irq_threads;
-
 DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs);

-static DEFINE_PER_CPU(unsigned long, pending_irqthread_mask);
-
-static DEFINE_PER_CPU(int [IVG13 + 1], pending_irq_count);
-
 asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);

 static void __ipipe_no_irqtail(void);
@ -93,6 +87,7 @@ void __ipipe_enable_pipeline(void)
 */
 void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
 {
+	struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
 	struct ipipe_domain *this_domain, *next_domain;
 	struct list_head *head, *pos;
 	int m_ack, s = -1;
@ -104,7 +99,6 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
 	 * interrupt.
 	 */
 	m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR);
-
 	this_domain = ipipe_current_domain;

 	if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control)))
@ -114,49 +108,28 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
 		next_domain = list_entry(head, struct ipipe_domain, p_link);
 		if (likely(test_bit(IPIPE_WIRED_FLAG, &next_domain->irqs[irq].control))) {
 			if (!m_ack && next_domain->irqs[irq].acknowledge != NULL)
-				next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
-			if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
-				s = __test_and_set_bit(IPIPE_STALL_FLAG,
-						       &ipipe_root_cpudom_var(status));
+				next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
+			if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
+				s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
 			__ipipe_dispatch_wired(next_domain, irq);
-				goto finalize;
-			return;
+			goto out;
 		}
 	}

 	/* Ack the interrupt. */

 	pos = head;
-
 	while (pos != &__ipipe_pipeline) {
 		next_domain = list_entry(pos, struct ipipe_domain, p_link);
-		/*
-		 * For each domain handling the incoming IRQ, mark it
-		 * as pending in its log.
-		 */
 		if (test_bit(IPIPE_HANDLE_FLAG, &next_domain->irqs[irq].control)) {
-			/*
-			 * Domains that handle this IRQ are polled for
-			 * acknowledging it by decreasing priority
-			 * order. The interrupt must be made pending
-			 * _first_ in the domain's status flags before
-			 * the PIC is unlocked.
-			 */
 			__ipipe_set_irq_pending(next_domain, irq);
-
 			if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) {
-				next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
+				next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
 				m_ack = 1;
 			}
 		}
-
-		/*
-		 * If the domain does not want the IRQ to be passed
-		 * down the interrupt pipe, exit the loop now.
-		 */
 		if (!test_bit(IPIPE_PASS_FLAG, &next_domain->irqs[irq].control))
 			break;
-
 		pos = next_domain->p_link.next;
 	}

@ -166,18 +139,24 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
 	 * immediately to the current domain if the interrupt has been
 	 * marked as 'sticky'. This search does not go beyond the
 	 * current domain in the pipeline. We also enforce the
-	 * additional root stage lock (blackfin-specific). */
+	 * additional root stage lock (blackfin-specific).
+	 */
+	if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
+		s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);

-	if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
-		s = __test_and_set_bit(IPIPE_STALL_FLAG,
-				       &ipipe_root_cpudom_var(status));
-finalize:
+	/*
+	 * If the interrupt preempted the head domain, then do not
+	 * even try to walk the pipeline, unless an interrupt is
+	 * pending for it.
+	 */
+	if (test_bit(IPIPE_AHEAD_FLAG, &this_domain->flags) &&
+	    ipipe_head_cpudom_var(irqpend_himask) == 0)
+		goto out;

 	__ipipe_walk_pipeline(head);
-
+out:
 	if (!s)
-		__clear_bit(IPIPE_STALL_FLAG,
-			    &ipipe_root_cpudom_var(status));
+		__clear_bit(IPIPE_STALL_FLAG, &p->status);
 }

 int __ipipe_check_root(void)
@ -187,7 +166,7 @@ int __ipipe_check_root(void)

 void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
 {
-	struct irq_desc *desc = irq_desc + irq;
+	struct irq_desc *desc = irq_to_desc(irq);
 	int prio = desc->ic_prio;

 	desc->depth = 0;
@ -199,7 +178,7 @@ EXPORT_SYMBOL(__ipipe_enable_irqdesc);

 void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
 {
-	struct irq_desc *desc = irq_desc + irq;
+	struct irq_desc *desc = irq_to_desc(irq);
 	int prio = desc->ic_prio;

 	if (ipd != &ipipe_root &&
@ -236,15 +215,18 @@ int __ipipe_syscall_root(struct pt_regs *regs)
 {
 	unsigned long flags;

-	/* We need to run the IRQ tail hook whenever we don't
+	/*
+	 * We need to run the IRQ tail hook whenever we don't
 	 * propagate a syscall to higher domains, because we know that
 	 * important operations might be pending there (e.g. Xenomai
-	 * deferred rescheduling). */
+	 * deferred rescheduling).
+	 */

-	if (!__ipipe_syscall_watched_p(current, regs->orig_p0)) {
+	if (regs->orig_p0 < NR_syscalls) {
 		void (*hook)(void) = (void (*)(void))__ipipe_irq_tail_hook;
 		hook();
-		return 0;
+		if ((current->flags & PF_EVNOTIFY) == 0)
+			return 0;
 	}

 	/*
@ -312,112 +294,46 @@ int ipipe_trigger_irq(unsigned irq)
 {
 	unsigned long flags;

+#ifdef CONFIG_IPIPE_DEBUG
 	if (irq >= IPIPE_NR_IRQS ||
 	    (ipipe_virtual_irq_p(irq)
 	     && !test_bit(irq - IPIPE_VIRQ_BASE, &__ipipe_virtual_irq_map)))
 		return -EINVAL;
+#endif

 	local_irq_save_hw(flags);
-
 	__ipipe_handle_irq(irq, NULL);
-
 	local_irq_restore_hw(flags);

 	return 1;
 }

-/* Move Linux IRQ to threads. */
-
-static int do_irqd(void *__desc)
+asmlinkage void __ipipe_sync_root(void)
 {
-	struct irq_desc *desc = __desc;
-	unsigned irq = desc - irq_desc;
-	int thrprio = desc->thr_prio;
-	int thrmask = 1 << thrprio;
-	int cpu = smp_processor_id();
-	cpumask_t cpumask;
+	unsigned long flags;

-	sigfillset(&current->blocked);
-	current->flags |= PF_NOFREEZE;
-	cpumask = cpumask_of_cpu(cpu);
-	set_cpus_allowed(current, cpumask);
-	ipipe_setscheduler_root(current, SCHED_FIFO, 50 + thrprio);
+	BUG_ON(irqs_disabled());

-	while (!kthread_should_stop()) {
-		local_irq_disable();
-		if (!(desc->status & IRQ_SCHEDULED)) {
-			set_current_state(TASK_INTERRUPTIBLE);
-resched:
-			local_irq_enable();
-			schedule();
-			local_irq_disable();
-		}
-		__set_current_state(TASK_RUNNING);
-		/*
-		 * If higher priority interrupt servers are ready to
-		 * run, reschedule immediately. We need this for the
-		 * GPIO demux IRQ handler to unmask the interrupt line
-		 * _last_, after all GPIO IRQs have run.
-		 */
-		if (per_cpu(pending_irqthread_mask, cpu) & ~(thrmask|(thrmask-1)))
-			goto resched;
-		if (--per_cpu(pending_irq_count[thrprio], cpu) == 0)
-			per_cpu(pending_irqthread_mask, cpu) &= ~thrmask;
-		desc->status &= ~IRQ_SCHEDULED;
-		desc->thr_handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs));
-		local_irq_enable();
-	}
-	__set_current_state(TASK_RUNNING);
-	return 0;
+	local_irq_save_hw(flags);
+
+	clear_thread_flag(TIF_IRQ_SYNC);
+
+	if (ipipe_root_cpudom_var(irqpend_himask) != 0)
+		__ipipe_sync_pipeline(IPIPE_IRQMASK_ANY);
+
+	local_irq_restore_hw(flags);
 }

-static void kick_irqd(unsigned irq, void *cookie)
+void ___ipipe_sync_pipeline(unsigned long syncmask)
 {
-	struct irq_desc *desc = irq_desc + irq;
-	int thrprio = desc->thr_prio;
-	int thrmask = 1 << thrprio;
-	int cpu = smp_processor_id();
+	struct ipipe_domain *ipd = ipipe_current_domain;

-	if (!(desc->status & IRQ_SCHEDULED)) {
-		desc->status |= IRQ_SCHEDULED;
-		per_cpu(pending_irqthread_mask, cpu) |= thrmask;
-		++per_cpu(pending_irq_count[thrprio], cpu);
-		wake_up_process(desc->thread);
-	}
-}
-
-int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc)
-{
-	if (desc->thread || !create_irq_threads)
-		return 0;
-
-	desc->thread = kthread_create(do_irqd, desc, "IRQ %d", irq);
-	if (desc->thread == NULL) {
-		printk(KERN_ERR "irqd: could not create IRQ thread %d!\n", irq);
-		return -ENOMEM;
+	if (ipd == ipipe_root_domain) {
+		if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
+			return;
 	}

-	wake_up_process(desc->thread);
-
-	desc->thr_handler = ipipe_root_domain->irqs[irq].handler;
-	ipipe_root_domain->irqs[irq].handler = &kick_irqd;
-
-	return 0;
-}
-
-void __init ipipe_init_irq_threads(void)
-{
-	unsigned irq;
-	struct irq_desc *desc;
-
-	create_irq_threads = 1;
-
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		desc = irq_desc + irq;
-		if (desc->action != NULL ||
-			(desc->status & IRQ_NOREQUEST) != 0)
-			ipipe_start_irq_thread(irq, desc);
-	}
+	__ipipe_sync_stage(syncmask);
 }

 EXPORT_SYMBOL(show_stack);
--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@ -149,11 +149,15 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 #endif
 	generic_handle_irq(irq);

-#ifndef CONFIG_IPIPE	/* Useless and bugous over the I-pipe: IRQs are threaded. */
-	/* If we're the only interrupt running (ignoring IRQ15 which is for
-	   syscalls), lower our priority to IRQ14 so that softirqs run at
-	   that level.  If there's another, lower-level interrupt, irq_exit
-	   will defer softirqs to that.  */
+#ifndef CONFIG_IPIPE
+	/*
+	 * If we're the only interrupt running (ignoring IRQ15 which
+	 * is for syscalls), lower our priority to IRQ14 so that
+	 * softirqs run at that level.  If there's another,
+	 * lower-level interrupt, irq_exit will defer softirqs to
+	 * that. If the interrupt pipeline is enabled, we are already
+	 * running at IRQ14 priority, so we don't need this code.
+	 */
 	CSYNC();
 	pending = bfin_read_IPEND() & ~0x8000;
 	other_ints = pending & (pending - 1);
--- a/arch/blackfin/kernel/kgdb_test.c
+++ b/arch/blackfin/kernel/kgdb_test.c
@ -20,6 +20,7 @@
 static char cmdline[256];
 static unsigned long len;

+#ifndef CONFIG_SMP
 static int num1 __attribute__((l1_data));

 void kgdb_l1_test(void) __attribute__((l1_text));
@ -32,6 +33,8 @@ void kgdb_l1_test(void)
 	printk(KERN_ALERT "L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
 	return ;
 }
+#endif
+
 #if L2_LENGTH

 static int num2 __attribute__((l2));
@ -59,10 +62,12 @@ int kgdb_test(char *name, int len, int count, int z)
 static int test_proc_output(char *buf)
 {
 	kgdb_test("hello world!", 12, 0x55, 0x10);
+#ifndef CONFIG_SMP
 	kgdb_l1_test();
-	#if L2_LENGTH
+#endif
+#if L2_LENGTH
 	kgdb_l2_test();
-	#endif
+#endif

 	return 0;
 }
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@ -45,6 +45,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/dma.h>
 #include <asm/fixed_code.h>
+#include <asm/cacheflush.h>
 #include <asm/mem_map.h>

 #define TEXT_OFFSET 0
@ -240,7 +241,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)

 			} else if (addr >= FIXED_CODE_START
 			    && addr + sizeof(tmp) <= FIXED_CODE_END) {
-				memcpy(&tmp, (const void *)(addr), sizeof(tmp));
+				copy_from_user_page(0, 0, 0, &tmp, (const void *)(addr), sizeof(tmp));
 				copied = sizeof(tmp);

 			} else
@ -320,7 +321,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)

 			} else if (addr >= FIXED_CODE_START
 			    && addr + sizeof(data) <= FIXED_CODE_END) {
-				memcpy((void *)(addr), &data, sizeof(data));
+				copy_to_user_page(0, 0, 0, (void *)(addr), &data, sizeof(data));
 				copied = sizeof(data);

 			} else
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@ -889,6 +889,10 @@ void __init setup_arch(char **cmdline_p)
 			       CPU, bfin_revid());
 	}

+	/* We can't run on BF548-0.1 due to ANOMALY 05000448 */
+	if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
+		panic("You can't run on this processor due to 05000448\n");
+
 	printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");

 	printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
@ -1141,12 +1145,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		icache_size = 0;

 	seq_printf(m, "cache size\t: %d KB(L1 icache) "
-		"%d KB(L1 dcache-%s) %d KB(L2 cache)\n",
+		"%d KB(L1 dcache%s) %d KB(L2 cache)\n",
 		icache_size, dcache_size,
 #if defined CONFIG_BFIN_WB
-		"wb"
+		"-wb"
 #elif defined CONFIG_BFIN_WT
-		"wt"
+		"-wt"
 #endif
 		"", 0);

--- a/arch/blackfin/kernel/time.c
+++ b/arch/blackfin/kernel/time.c
@ -134,7 +134,10 @@ irqreturn_t timer_interrupt(int irq, void *dummy)

 	write_seqlock(&xtime_lock);
 #if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE)
-/* FIXME: Here TIMIL0 is not set when IPIPE enabled, why? */
+	/*
+	 * TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is
+	 * enabled.
+	 */
 	if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) {
 #endif
 		do_timer(1);
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@ -113,7 +113,6 @@ static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
 	.dev.platform_data = &bfin_mii_bus,
 };
-#endif

 #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
 static struct dsa_platform_data ksz8893m_switch_data = {
@ -132,6 +131,7 @@ static struct platform_device ksz8893m_switch_device = {
 	.dev.platform_data = &ksz8893m_switch_data,
 };
 #endif
+#endif

 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
@ -171,6 +171,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif

+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #if defined(CONFIG_NET_DSA_KSZ8893M) \
 	|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
 /* SPI SWITCH CHIP */
@ -179,10 +180,11 @@ static struct bfin5xx_spi_chip spi_switch_info = {
 	.bits_per_word = 8,
 };
 #endif
+#endif

-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@ -259,6 +261,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #if defined(CONFIG_NET_DSA_KSZ8893M) \
 	|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
 	{
@ -271,24 +274,15 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
+#endif

-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
@ -630,11 +624,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 	&bfin_mii_bus,
 	&bfin_mac_device,
-#endif
-
 #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
 	&ksz8893m_switch_device,
 #endif
+#endif

 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	&bfin_spi0_device,
--- a/arch/blackfin/mach-bf518/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h
@ -2,12 +2,12 @@
 * File: include/asm-blackfin/mach-bf518/anomaly.h
 * Bugs: Enter bugs at http://blackfin.uclinux.org/
 *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
 * Licensed under the GPL-2 or later.
 */

 /* This file shoule be up to date with:
- *  - ????
+ *  - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
 */

 #ifndef _MACH_ANOMALY_H_
@ -19,6 +19,8 @@
 #define ANOMALY_05000122 (1)
 /* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
@ -53,6 +55,12 @@
 #define ANOMALY_05000443 (1)
 /* Incorrect L1 Instruction Bank B Memory Map Location */
 #define ANOMALY_05000444 (1)
+/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
+#define ANOMALY_05000452 (1)
+/* PWM_TRIPB Signal Not Available on PG10 */
+#define ANOMALY_05000453 (1)
+/* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */
+#define ANOMALY_05000455 (1)

 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
@ -65,15 +73,20 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
 #define ANOMALY_05000285 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (0)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)

 #endif
--- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	 CH_UART0_TX,
 	 CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	 CONFIG_UART0_CTS_PIN,
 	 CONFIG_UART0_RTS_PIN,
 #endif
@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	 CH_UART1_TX,
 	 CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	 CONFIG_UART1_CTS_PIN,
 	 CONFIG_UART1_RTS_PIN,
 #endif
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@ -487,9 +487,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif

-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@ -585,23 +585,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &ad9960_spi_chip_info,
 	},
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@ -256,9 +256,9 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif

-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@ -366,23 +366,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@ -2,7 +2,7 @@
 * File: include/asm-blackfin/mach-bf527/anomaly.h
 * Bugs: Enter bugs at http://blackfin.uclinux.org/
 *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
 * Licensed under the GPL-2 or later.
 */

@ -167,12 +167,16 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
 #define ANOMALY_05000285 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000412 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)

 #endif
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	 CH_UART0_TX,
 	 CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	 CONFIG_UART0_CTS_PIN,
 	 CONFIG_UART0_RTS_PIN,
 #endif
@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	 CH_UART1_TX,
 	 CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	 CONFIG_UART1_CTS_PIN,
 	 CONFIG_UART1_RTS_PIN,
 #endif
--- a/arch/blackfin/mach-bf533/boards/Kconfig
+++ b/arch/blackfin/mach-bf533/boards/Kconfig
@ -38,9 +38,4 @@ config BFIN532_IP0X
 	help
 	  Core support for IP04/IP04 open hardware IP-PBX.

-config GENERIC_BF533_BOARD
-	bool "Generic"
-	help
-	  Generic or Custom board support.
-
 endchoice
--- a/arch/blackfin/mach-bf533/boards/Makefile
+++ b/arch/blackfin/mach-bf533/boards/Makefile
@ -2,7 +2,6 @@
 # arch/blackfin/mach-bf533/boards/Makefile
 #

-obj-$(CONFIG_GENERIC_BF533_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN533_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN532_IP0X)             += ip0x.o
 obj-$(CONFIG_BFIN533_EZKIT)            += ezkit.o
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@ -101,9 +101,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif

-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@ -129,23 +129,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@ -96,9 +96,9 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif

-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@ -138,23 +138,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
--- a/arch/blackfin/mach-bf533/boards/generic_board.c
+++ b/arch/blackfin/mach-bf533/boards/generic_board.c
@ -1,126 +0,0 @@
-/*
- * File:         arch/blackfin/mach-bf533/generic_board.c
- * Based on:     arch/blackfin/mach-bf533/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
- *
- * Created:      2005
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-static struct platform_device rtc_device = {
-	.name = "rtc-bfin",
-	.id   = -1,
-};
-#endif
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
-	{
-		.start = 0x20300300,
-		.end = 0x20300300 + 16,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PROG_INTB,
-		.end = IRQ_PROG_INTB,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	}, {
-		.start = IRQ_PF7,
-		.end = IRQ_PF7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name = "smc91x",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(smc91x_resources),
-	.resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir0_device = {
-	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
-	.resource = bfin_sir0_resources,
-};
-#endif
-#endif
-
-static struct platform_device *generic_board_devices[] __initdata = {
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-	&rtc_device,
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-	&smc91x_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-	&bfin_sir0_device,
-#endif
-#endif
-};
-
-static int __init generic_board_init(void)
-{
-	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices));
-}
-
-arch_initcall(generic_board_init);
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@ -127,8 +127,8 @@ static struct platform_device dm9000_device2 = {
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* all SPI peripherals info goes here */

-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 /*
 * CPOL (Clock Polarity)
 *  0 - Active high SCK
@ -152,14 +152,13 @@ static struct bfin5xx_spi_chip spi_mmc_chip_info = {
 /* Notice: for blackfin, the speed_hz is the value of register
 * SPI_BAUD, not the real baudrate */
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 2,
 		.bus_num = 1,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 	},
 #endif
 };
--- a/arch/blackfin/mach-bf533/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@ -2,7 +2,7 @@
 * File: include/asm-blackfin/mach-bf533/anomaly.h
 * Bugs: Enter bugs at http://blackfin.uclinux.org/
 *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
 * Licensed under the GPL-2 or later.
 */

@ -160,7 +160,7 @@
 #define ANOMALY_05000301 (__SILICON_REVISION__ < 6)
 /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
 #define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
 /* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
 #define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
@ -278,9 +278,12 @@
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)

 #endif
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@ -134,7 +134,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	CH_UART_TX,
 	CH_UART_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART0_CTS_PIN,
 	CONFIG_UART0_RTS_PIN,
 #endif
--- a/arch/blackfin/mach-bf537/boards/Kconfig
+++ b/arch/blackfin/mach-bf537/boards/Kconfig
@ -33,9 +33,4 @@ config CAMSIG_MINOTAUR
 	help
 	  Board supply package for CSP Minotaur

-config GENERIC_BF537_BOARD
-	bool "Generic"
-	help
-	  Generic or Custom board support.
-
 endchoice
--- a/arch/blackfin/mach-bf537/boards/Makefile
+++ b/arch/blackfin/mach-bf537/boards/Makefile
@ -2,7 +2,6 @@
 # arch/blackfin/mach-bf537/boards/Makefile
 #

-obj-$(CONFIG_GENERIC_BF537_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN537_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN537_BLUETECHNIX_CM)   += cm_bf537.o
 obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM)  += tcm_bf537.o
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif

-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@ -160,23 +160,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 7,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 1,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@ -1,745 +0,0 @@
-/*
- * File:         arch/blackfin/mach-bf537/boards/generic_board.c
- * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
- *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/device.h>
-#include <linux/etherdevice.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb/isp1362.h>
-#endif
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/usb/sl811.h>
-#include <asm/dma.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/reboot.h>
-#include <asm/portmux.h>
-#include <linux/spi/ad7877.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
-#include <linux/usb/isp1760.h>
-static struct resource bfin_isp1760_resources[] = {
-	[0] = {
-		.start  = 0x203C0000,
-		.end    = 0x203C0000 + 0x000fffff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_PF7,
-		.end    = IRQ_PF7,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct isp1760_platform_data isp1760_priv = {
-	.is_isp1761 = 0,
-	.port1_disable = 0,
-	.bus_width_16 = 1,
-	.port1_otg = 0,
-	.analog_oc = 0,
-	.dack_polarity_high = 0,
-	.dreq_polarity_high = 0,
-};
-
-static struct platform_device bfin_isp1760_device = {
-	.name           = "isp1760-hcd",
-	.id             = 0,
-	.dev = {
-		.platform_data = &isp1760_priv,
-	},
-	.num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
-	.resource       = bfin_isp1760_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
-static struct resource bfin_pcmcia_cf_resources[] = {
-	{
-		.start = 0x20310000, /* IO PORT */
-		.end = 0x20312000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20311000, /* Attribute Memory */
-		.end = 0x20311FFF,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PF4,
-		.end = IRQ_PF4,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	}, {
-		.start = 6, /* Card Detect PF6 */
-		.end = 6,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pcmcia_cf_device = {
-	.name = "bfin_cf_pcmcia",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
-	.resource = bfin_pcmcia_cf_resources,
-};
-#endif
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-static struct platform_device rtc_device = {
-	.name = "rtc-bfin",
-	.id   = -1,
-};
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
-	{
-		.name = "smc91x-regs",
-		.start = 0x20300300,
-		.end = 0x20300300 + 16,
-		.flags = IORESOURCE_MEM,
-	}, {
-
-		.start = IRQ_PF7,
-		.end = IRQ_PF7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-static struct platform_device smc91x_device = {
-	.name = "smc91x",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(smc91x_resources),
-	.resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= 0x203FB800,
-		.end	= 0x203FB800 + 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0x203FB800 + 4,
-		.end	= 0x203FB800 + 5,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= IRQ_PF9,
-		.end	= IRQ_PF9,
-		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
-	},
-};
-
-static struct platform_device dm9000_device = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-};
-#endif
-
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-static struct resource sl811_hcd_resources[] = {
-	{
-		.start = 0x20340000,
-		.end = 0x20340000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20340004,
-		.end = 0x20340004,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = CONFIG_USB_SL811_BFIN_IRQ,
-		.end = CONFIG_USB_SL811_BFIN_IRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-void sl811_port_power(struct device *dev, int is_on)
-{
-	gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
-	gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
-
-}
-#endif
-
-static struct sl811_platform_data sl811_priv = {
-	.potpg = 10,
-	.power = 250,       /* == 500mA */
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-	.port_power = &sl811_port_power,
-#endif
-};
-
-static struct platform_device sl811_hcd_device = {
-	.name = "sl811-hcd",
-	.id = 0,
-	.dev = {
-		.platform_data = &sl811_priv,
-	},
-	.num_resources = ARRAY_SIZE(sl811_hcd_resources),
-	.resource = sl811_hcd_resources,
-};
-#endif
-
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-static struct resource isp1362_hcd_resources[] = {
-	{
-		.start = 0x20360000,
-		.end = 0x20360000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20360004,
-		.end = 0x20360004,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
-		.end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct isp1362_platform_data isp1362_priv = {
-	.sel15Kres = 1,
-	.clknotstop = 0,
-	.oc_enable = 0,
-	.int_act_high = 0,
-	.int_edge_triggered = 0,
-	.remote_wakeup_connected = 0,
-	.no_power_switching = 1,
-	.power_switching_mode = 0,
-};
-
-static struct platform_device isp1362_hcd_device = {
-	.name = "isp1362-hcd",
-	.id = 0,
-	.dev = {
-		.platform_data = &isp1362_priv,
-	},
-	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
-	.resource = isp1362_hcd_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-static struct platform_device bfin_mii_bus = {
-	.name = "bfin_mii_bus",
-};
-
-static struct platform_device bfin_mac_device = {
-	.name = "bfin_mac",
-	.dev.platform_data = &bfin_mii_bus,
-};
-#endif
-
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
-static struct resource net2272_bfin_resources[] = {
-	{
-		.start = 0x20300000,
-		.end = 0x20300000 + 0x100,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PF7,
-		.end = IRQ_PF7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct platform_device net2272_bfin_device = {
-	.name = "net2272",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
-	.resource = net2272_bfin_resources,
-};
-#endif
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
-static struct mtd_partition bfin_spi_flash_partitions[] = {
-	{
-		.name = "bootloader(spi)",
-		.size = 0x00020000,
-		.offset = 0,
-		.mask_flags = MTD_CAP_ROM
-	}, {
-		.name = "linux kernel(spi)",
-		.size = 0xe0000,
-		.offset = 0x20000
-	}, {
-		.name = "file system(spi)",
-		.size = 0x700000,
-		.offset = 0x00100000,
-	}
-};
-
-static struct flash_platform_data bfin_spi_flash_data = {
-	.name = "m25p80",
-	.parts = bfin_spi_flash_partitions,
-	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
-	.type = "m25p64",
-};
-
-/* SPI flash chip (m25p64) */
-static struct bfin5xx_spi_chip spi_flash_chip_info = {
-	.enable_dma = 0,         /* use dma transfer with this chip*/
-	.bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
-/* SPI ADC chip */
-static struct bfin5xx_spi_chip spi_adc_chip_info = {
-	.enable_dma = 1,         /* use dma transfer with this chip*/
-	.bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
-static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
-	.bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-	.ctl_reg	= 0x4, /* send zero */
-	.enable_dma	= 0,
-	.bits_per_word	= 8,
-	.cs_change_per_word = 1,
-};
-#endif
-
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
-static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-
-static const struct ad7877_platform_data bfin_ad7877_ts_info = {
-	.model			= 7877,
-	.vref_delay_usecs	= 50,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.pressure_max		= 1000,
-	.pressure_min		= 0,
-	.stopacq_polarity 	= 1,
-	.first_conversion_delay = 3,
-	.acquisition_time 	= 1,
-	.averaging 		= 1,
-	.pen_down_acc_interval 	= 1,
-};
-#endif
-
-static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
-	{
-		/* the modalias must be the same as spi device driver name */
-		.modalias = "m25p80", /* Name of spi_driver for this device */
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0, /* Framework bus number */
-		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
-		.platform_data = &bfin_spi_flash_data,
-		.controller_data = &spi_flash_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
-	{
-		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
-		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0, /* Framework bus number */
-		.chip_select = 1, /* Framework chip select. */
-		.platform_data = NULL, /* No spi_driver specific config */
-		.controller_data = &spi_adc_chip_info,
-	},
-#endif
-
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
-	{
-		.modalias = "ad1836-spi",
-		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
-		.controller_data = &ad1836_spi_chip_info,
-	},
-#endif
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-	{
-		.modalias = "ad9960-spi",
-		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = &ad9960_spi_chip_info,
-	},
-#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-	{
-		.modalias = "spi_mmc_dummy",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-#if defined(CONFIG_PBX)
-	{
-		.modalias = "fxs-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J11_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "fxo-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J19_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
-	{
-		.modalias		= "ad7877",
-		.platform_data		= &bfin_ad7877_ts_info,
-		.irq			= IRQ_PF6,
-		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num	= 0,
-		.chip_select  = 1,
-		.controller_data = &spi_ad7877_chip_info,
-	},
-#endif
-};
-
-/* SPI controller data */
-static struct bfin5xx_spi_master bfin_spi0_info = {
-	.num_chipselect = 8,
-	.enable_dma = 1,  /* master has the ability to do dma transfer */
-	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
-};
-
-/* SPI (0) */
-static struct resource bfin_spi0_resource[] = {
-	[0] = {
-		.start = SPI0_REGBASE,
-		.end   = SPI0_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-		},
-	[1] = {
-		.start = CH_SPI,
-		.end   = CH_SPI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_spi0_device = {
-	.name = "bfin-spi",
-	.id = 0, /* Bus number */
-	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
-	.resource = bfin_spi0_resource,
-	.dev = {
-		.platform_data = &bfin_spi0_info, /* Passed to driver */
-	},
-};
-#endif  /* spi master and devices */
-
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-static struct platform_device bfin_fb_device = {
-	.name = "bf537-lq035",
-};
-#endif
-
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
-	.name = "bfin-adv7393",
-};
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device bfin_uart_device = {
-	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir0_device = {
-	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
-	.resource = bfin_sir0_resources,
-};
-#endif
-#ifdef CONFIG_BFIN_SIR1
-static struct resource bfin_sir1_resources[] = {
-	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART1_RX,
-		.end = CH_UART1_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir1_device = {
-	.name = "bfin_sir",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
-	.resource = bfin_sir1_resources,
-};
-#endif
-#endif
-
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
-static struct resource bfin_twi0_resource[] = {
-	[0] = {
-		.start = TWI0_REGBASE,
-		.end   = TWI0_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TWI,
-		.end   = IRQ_TWI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c_bfin_twi_device = {
-	.name = "i2c-bfin-twi",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
-	.resource = bfin_twi0_resource,
-};
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
-static struct platform_device bfin_sport0_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 0,
-};
-
-static struct platform_device bfin_sport1_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 1,
-};
-#endif
-
-static struct platform_device *stamp_devices[] __initdata = {
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
-	&bfin_pcmcia_cf_device,
-#endif
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-	&rtc_device,
-#endif
-
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-	&sl811_hcd_device,
-#endif
-
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-	&isp1362_hcd_device,
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-	&smc91x_device,
-#endif
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-	&dm9000_device,
-#endif
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-	&bfin_mii_bus,
-	&bfin_mac_device,
-#endif
-
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
-	&net2272_bfin_device,
-#endif
-
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
-	&bfin_isp1760_device,
-#endif
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-	&bfin_spi0_device,
-#endif
-
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-	&bfin_fb_device,
-#endif
-
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-	&bfin_fb_adv7393_device,
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-	&bfin_sir0_device,
-#endif
-#ifdef CONFIG_BFIN_SIR1
-	&bfin_sir1_device,
-#endif
-#endif
-
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
-	&i2c_bfin_twi_device,
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
-	&bfin_sport0_uart_device,
-	&bfin_sport1_uart_device,
-#endif
-};
-
-static int __init generic_init(void)
-{
-	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-	spi_register_board_info(bfin_spi_board_info,
-				ARRAY_SIZE(bfin_spi_board_info));
-#endif
-
-	return 0;
-}
-
-arch_initcall(generic_init);
-
-void native_machine_restart(char *cmd)
-{
-	/* workaround reboot hang when booting from SPI */
-	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
-}
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-void bfin_get_ether_addr(char *addr)
-{
-	random_ether_addr(addr);
-	printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
-}
-EXPORT_SYMBOL(bfin_get_ether_addr);
-#endif
--- a/Show More
+++ b/Show More