dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

microblaze: Remove r0_ram pointer and PTO alignment 

r0_ram pool was used for saving/restoring register
content if hw exception happen. This poll was replaced by
pt_pool_space with PT_SIZE size.
Based on this change SAVE_STATE_ARG_SPACE was removed which
caused that PTO offset is zero that's why is also removed.

r0_ram space was used as scratchpad by v850. In early
Microblaze Linux developing phase was this part of code
blindly copied.

Signed-off-by: Michal Simek <monstr@monstr.eu>
This commit is contained in:
Michal Simek 2011-01-31 15:10:04 +01:00
parent d8748e73e8
commit 6e83557c38
7 changed files with 157 additions and 200 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
arch/microblaze/include/asm/entry.h
View File

@ -31,40 +31,4 @@ DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */
DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */
# endif /* __ASSEMBLY__ */
#ifndef CONFIG_MMU
/* noMMU hasn't any space for args */
# define STATE_SAVE_ARG_SPACE (0)
#else /* CONFIG_MMU */
/* If true, system calls save and restore all registers (except result
* registers, of course). If false, then `call clobbered' registers
* will not be preserved, on the theory that system calls are basically
* function calls anyway, and the caller should be able to deal with it.
* This is a security risk, of course, as `internal' values may leak out
* after a system call, but that certainly doesn't matter very much for
* a processor with no MMU protection! For a protected-mode kernel, it
* would be faster to just zero those registers before returning.
*
* I can not rely on the glibc implementation. If you turn it off make
* sure that r11/r12 is saved in user-space. --KAA
*
* These are special variables using by the kernel trap/interrupt code
* to save registers in, at a time when there are no spare registers we
* can use to do so, and we can't depend on the value of the stack
* pointer. This means that they must be within a signed 16-bit
* displacement of 0x00000000.
*/
/* A `state save frame' is a struct pt_regs preceded by some extra space
* suitable for a function call stack frame. */
/* Amount of room on the stack reserved for arguments and to satisfy the
* C calling conventions, in addition to the space used by the struct
* pt_regs that actually holds saved values. */
#define STATE_SAVE_ARG_SPACE (6*4) /* Up to six arguments */
#endif /* CONFIG_MMU */
#endif /* _ASM_MICROBLAZE_ENTRY_H */

2
arch/microblaze/include/asm/processor.h
View File

@ -155,7 +155,7 @@ unsigned long get_wchan(struct task_struct *p);
# define task_regs(task) ((struct pt_regs *)task_tos(task) - 1)
# define task_pt_regs_plus_args(tsk) \
(((void *)task_pt_regs(tsk)) - STATE_SAVE_ARG_SPACE)
((void *)task_pt_regs(tsk))
# define task_sp(task) (task_regs(task)->r1)
# define task_pc(task) (task_regs(task)->pc)

292
arch/microblaze/kernel/entry.S
View File

@ -33,12 +33,6 @@
#undef DEBUG
/* The size of a state save frame. */
#define STATE_SAVE_SIZE (PT_SIZE + STATE_SAVE_ARG_SPACE)
/* The offset of the struct pt_regs in a `state save frame' on the stack. */
#define PTO STATE_SAVE_ARG_SPACE /* 24 the space for args */
#ifdef DEBUG
/* Create space for syscalls counting. */
.section .data
@ -181,72 +175,72 @@ syscall_debug_table:
1:
#define SAVE_REGS \
swi r2, r1, PTO+PT_R2; /* Save SDA */ \
swi r3, r1, PTO+PT_R3; \
swi r4, r1, PTO+PT_R4; \
swi r5, r1, PTO+PT_R5; \
swi r6, r1, PTO+PT_R6; \
swi r7, r1, PTO+PT_R7; \
swi r8, r1, PTO+PT_R8; \
swi r9, r1, PTO+PT_R9; \
swi r10, r1, PTO+PT_R10; \
swi r11, r1, PTO+PT_R11; /* save clobbered regs after rval */\
swi r12, r1, PTO+PT_R12; \
swi r13, r1, PTO+PT_R13; /* Save SDA2 */ \
swi r14, r1, PTO+PT_PC; /* PC, before IRQ/trap */ \
swi r15, r1, PTO+PT_R15; /* Save LP */ \
swi r16, r1, PTO+PT_R16; \
swi r17, r1, PTO+PT_R17; \
swi r18, r1, PTO+PT_R18; /* Save asm scratch reg */ \
swi r19, r1, PTO+PT_R19; \
swi r20, r1, PTO+PT_R20; \
swi r21, r1, PTO+PT_R21; \
swi r22, r1, PTO+PT_R22; \
swi r23, r1, PTO+PT_R23; \
swi r24, r1, PTO+PT_R24; \
swi r25, r1, PTO+PT_R25; \
swi r26, r1, PTO+PT_R26; \
swi r27, r1, PTO+PT_R27; \
swi r28, r1, PTO+PT_R28; \
swi r29, r1, PTO+PT_R29; \
swi r30, r1, PTO+PT_R30; \
swi r31, r1, PTO+PT_R31; /* Save current task reg */ \
swi r2, r1, PT_R2; /* Save SDA */ \
swi r3, r1, PT_R3; \
swi r4, r1, PT_R4; \
swi r5, r1, PT_R5; \
swi r6, r1, PT_R6; \
swi r7, r1, PT_R7; \
swi r8, r1, PT_R8; \
swi r9, r1, PT_R9; \
swi r10, r1, PT_R10; \
swi r11, r1, PT_R11; /* save clobbered regs after rval */\
swi r12, r1, PT_R12; \
swi r13, r1, PT_R13; /* Save SDA2 */ \
swi r14, r1, PT_PC; /* PC, before IRQ/trap */ \
swi r15, r1, PT_R15; /* Save LP */ \
swi r16, r1, PT_R16; \
swi r17, r1, PT_R17; \
swi r18, r1, PT_R18; /* Save asm scratch reg */ \
swi r19, r1, PT_R19; \
swi r20, r1, PT_R20; \
swi r21, r1, PT_R21; \
swi r22, r1, PT_R22; \
swi r23, r1, PT_R23; \
swi r24, r1, PT_R24; \
swi r25, r1, PT_R25; \
swi r26, r1, PT_R26; \
swi r27, r1, PT_R27; \
swi r28, r1, PT_R28; \
swi r29, r1, PT_R29; \
swi r30, r1, PT_R30; \
swi r31, r1, PT_R31; /* Save current task reg */ \
mfs r11, rmsr; /* save MSR */ \
swi r11, r1, PTO+PT_MSR;
swi r11, r1, PT_MSR;
#define RESTORE_REGS \
lwi r11, r1, PTO+PT_MSR; \
lwi r11, r1, PT_MSR; \
mts rmsr , r11; \
lwi r2, r1, PTO+PT_R2; /* restore SDA */ \
lwi r3, r1, PTO+PT_R3; \
lwi r4, r1, PTO+PT_R4; \
lwi r5, r1, PTO+PT_R5; \
lwi r6, r1, PTO+PT_R6; \
lwi r7, r1, PTO+PT_R7; \
lwi r8, r1, PTO+PT_R8; \
lwi r9, r1, PTO+PT_R9; \
lwi r10, r1, PTO+PT_R10; \
lwi r11, r1, PTO+PT_R11; /* restore clobbered regs after rval */\
lwi r12, r1, PTO+PT_R12; \
lwi r13, r1, PTO+PT_R13; /* restore SDA2 */ \
lwi r14, r1, PTO+PT_PC; /* RESTORE_LINK PC, before IRQ/trap */\
lwi r15, r1, PTO+PT_R15; /* restore LP */ \
lwi r16, r1, PTO+PT_R16; \
lwi r17, r1, PTO+PT_R17; \
lwi r18, r1, PTO+PT_R18; /* restore asm scratch reg */ \
lwi r19, r1, PTO+PT_R19; \
lwi r20, r1, PTO+PT_R20; \
lwi r21, r1, PTO+PT_R21; \
lwi r22, r1, PTO+PT_R22; \
lwi r23, r1, PTO+PT_R23; \
lwi r24, r1, PTO+PT_R24; \
lwi r25, r1, PTO+PT_R25; \
lwi r26, r1, PTO+PT_R26; \
lwi r27, r1, PTO+PT_R27; \
lwi r28, r1, PTO+PT_R28; \
lwi r29, r1, PTO+PT_R29; \
lwi r30, r1, PTO+PT_R30; \
lwi r31, r1, PTO+PT_R31; /* Restore cur task reg */
lwi r2, r1, PT_R2; /* restore SDA */ \
lwi r3, r1, PT_R3; \
lwi r4, r1, PT_R4; \
lwi r5, r1, PT_R5; \
lwi r6, r1, PT_R6; \
lwi r7, r1, PT_R7; \
lwi r8, r1, PT_R8; \
lwi r9, r1, PT_R9; \
lwi r10, r1, PT_R10; \
lwi r11, r1, PT_R11; /* restore clobbered regs after rval */\
lwi r12, r1, PT_R12; \
lwi r13, r1, PT_R13; /* restore SDA2 */ \
lwi r14, r1, PT_PC; /* RESTORE_LINK PC, before IRQ/trap */\
lwi r15, r1, PT_R15; /* restore LP */ \
lwi r16, r1, PT_R16; \
lwi r17, r1, PT_R17; \
lwi r18, r1, PT_R18; /* restore asm scratch reg */ \
lwi r19, r1, PT_R19; \
lwi r20, r1, PT_R20; \
lwi r21, r1, PT_R21; \
lwi r22, r1, PT_R22; \
lwi r23, r1, PT_R23; \
lwi r24, r1, PT_R24; \
lwi r25, r1, PT_R25; \
lwi r26, r1, PT_R26; \
lwi r27, r1, PT_R27; \
lwi r28, r1, PT_R28; \
lwi r29, r1, PT_R29; \
lwi r30, r1, PT_R30; \
lwi r31, r1, PT_R31; /* Restore cur task reg */
#define SAVE_STATE \
swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* save stack */ \
@ -259,11 +253,11 @@ syscall_debug_table:
lwi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)); \
/* FIXME: I can add these two lines to one */ \
/* tophys(r1,r1); */ \
/* addik r1, r1, -STATE_SAVE_SIZE; */ \
addik r1, r1, CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START - STATE_SAVE_SIZE; \
/* addik r1, r1, -PT_SIZE; */ \
addik r1, r1, CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START - PT_SIZE; \
SAVE_REGS \
brid 2f; \
swi r1, r1, PTO+PT_MODE; \
swi r1, r1, PT_MODE; \
1: /* User-mode state save. */ \
lwi r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */\
tophys(r1,r1); \
@ -271,12 +265,12 @@ syscall_debug_table:
/* MS these three instructions can be added to one */ \
/* addik r1, r1, THREAD_SIZE; */ \
/* tophys(r1,r1); */ \
/* addik r1, r1, -STATE_SAVE_SIZE; */ \
addik r1, r1, THREAD_SIZE + CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START - STATE_SAVE_SIZE; \
/* addik r1, r1, -PT_SIZE; */ \
addik r1, r1, THREAD_SIZE + CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START - PT_SIZE; \
SAVE_REGS \
lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); \
swi r11, r1, PTO+PT_R1; /* Store user SP. */ \
swi r0, r1, PTO + PT_MODE; /* Was in user-mode. */ \
swi r11, r1, PT_R1; /* Store user SP. */ \
swi r0, r1, PT_MODE; /* Was in user-mode. */ \
/* MS: I am clearing UMS even in case when I come from kernel space */ \
clear_ums; \
2: lwi CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
@ -308,10 +302,10 @@ C_ENTRY(_user_exception):
lwi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* Reload kernel stack-ptr*/
tophys(r1,r1);
addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */
addik r1, r1, -PT_SIZE; /* Make room on the stack. */
SAVE_REGS
swi r1, r1, PTO + PT_MODE; /* pt_regs -> kernel mode */
swi r1, r1, PT_MODE; /* pt_regs -> kernel mode */
brid 2f;
nop; /* Fill delay slot */
@ -324,18 +318,18 @@ C_ENTRY(_user_exception):
addik r1, r1, THREAD_SIZE;
tophys(r1,r1);
addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */
addik r1, r1, -PT_SIZE; /* Make room on the stack. */
SAVE_REGS
swi r0, r1, PTO + PT_R3
swi r0, r1, PTO + PT_R4
swi r0, r1, PT_R3
swi r0, r1, PT_R4
swi r0, r1, PTO + PT_MODE; /* Was in user-mode. */
swi r0, r1, PT_MODE; /* Was in user-mode. */
lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
swi r11, r1, PTO+PT_R1; /* Store user SP. */
swi r11, r1, PT_R1; /* Store user SP. */
clear_ums;
2: lwi CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
/* Save away the syscall number. */
swi r12, r1, PTO+PT_R0;
swi r12, r1, PT_R0;
tovirt(r1,r1)
/* where the trap should return need -8 to adjust for rtsd r15, 8*/
@ -354,18 +348,18 @@ C_ENTRY(_user_exception):
beqi r11, 4f
addik r3, r0, -ENOSYS
swi r3, r1, PTO + PT_R3
swi r3, r1, PT_R3
brlid r15, do_syscall_trace_enter
addik r5, r1, PTO + PT_R0
addik r5, r1, PT_R0
# do_syscall_trace_enter returns the new syscall nr.
addk r12, r0, r3
lwi r5, r1, PTO+PT_R5;
lwi r6, r1, PTO+PT_R6;
lwi r7, r1, PTO+PT_R7;
lwi r8, r1, PTO+PT_R8;
lwi r9, r1, PTO+PT_R9;
lwi r10, r1, PTO+PT_R10;
lwi r5, r1, PT_R5;
lwi r6, r1, PT_R6;
lwi r7, r1, PT_R7;
lwi r8, r1, PT_R8;
lwi r9, r1, PT_R9;
lwi r10, r1, PT_R10;
4:
/* Jump to the appropriate function for the system call number in r12
* (r12 is not preserved), or return an error if r12 is not valid.
@ -404,10 +398,10 @@ C_ENTRY(_user_exception):
/* Entry point used to return from a syscall/trap */
/* We re-enable BIP bit before state restore */
C_ENTRY(ret_from_trap):
swi r3, r1, PTO + PT_R3
swi r4, r1, PTO + PT_R4
swi r3, r1, PT_R3
swi r4, r1, PT_R4
lwi r11, r1, PTO + PT_MODE;
lwi r11, r1, PT_MODE;
/* See if returning to kernel mode, if so, skip resched &c. */
bnei r11, 2f;
/* We're returning to user mode, so check for various conditions that
@ -419,7 +413,7 @@ C_ENTRY(ret_from_trap):
beqi r11, 1f
brlid r15, do_syscall_trace_leave
addik r5, r1, PTO + PT_R0
addik r5, r1, PT_R0
1:
/* We're returning to user mode, so check for various conditions that
* trigger rescheduling. */
@ -439,7 +433,7 @@ C_ENTRY(ret_from_trap):
andi r11, r11, _TIF_SIGPENDING;
beqi r11, 1f; /* Signals to handle, handle them */
addik r5, r1, PTO; /* Arg 1: struct pt_regs *regs */
addik r5, r1, 0; /* Arg 1: struct pt_regs *regs */
addi r7, r0, 1; /* Arg 3: int in_syscall */
bralid r15, do_signal; /* Handle any signals */
add r6, r0, r0; /* Arg 2: sigset_t *oldset */
@ -450,7 +444,7 @@ C_ENTRY(ret_from_trap):
VM_OFF;
tophys(r1,r1);
RESTORE_REGS;
addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */
addik r1, r1, PT_SIZE /* Clean up stack space. */
lwi r1, r1, PT_R1 - PT_SIZE;/* Restore user stack pointer. */
bri 6f;
@ -459,7 +453,7 @@ C_ENTRY(ret_from_trap):
VM_OFF;
tophys(r1,r1);
RESTORE_REGS;
addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */
addik r1, r1, PT_SIZE /* Clean up stack space. */
tovirt(r1,r1);
6:
TRAP_return: /* Make global symbol for debugging */
@ -472,8 +466,8 @@ TRAP_return: /* Make global symbol for debugging */
C_ENTRY(sys_fork_wrapper):
addi r5, r0, SIGCHLD /* Arg 0: flags */
lwi r6, r1, PTO+PT_R1 /* Arg 1: child SP (use parent's) */
addik r7, r1, PTO /* Arg 2: parent context */
lwi r6, r1, PT_R1 /* Arg 1: child SP (use parent's) */
addik r7, r1, 0 /* Arg 2: parent context */
add r8. r0, r0 /* Arg 3: (unused) */
add r9, r0, r0; /* Arg 4: (unused) */
brid do_fork /* Do real work (tail-call) */
@ -493,12 +487,12 @@ C_ENTRY(ret_from_fork):
C_ENTRY(sys_vfork):
brid microblaze_vfork /* Do real work (tail-call) */
addik r5, r1, PTO
addik r5, r1, 0
C_ENTRY(sys_clone):
bnei r6, 1f; /* See if child SP arg (arg 1) is 0. */
lwi r6, r1, PTO + PT_R1; /* If so, use paret's stack ptr */
1: addik r7, r1, PTO; /* Arg 2: parent context */
lwi r6, r1, PT_R1; /* If so, use paret's stack ptr */
1: addik r7, r1, 0; /* Arg 2: parent context */
add r8, r0, r0; /* Arg 3: (unused) */
add r9, r0, r0; /* Arg 4: (unused) */
brid do_fork /* Do real work (tail-call) */
@ -506,11 +500,11 @@ C_ENTRY(sys_clone):
C_ENTRY(sys_execve):
brid microblaze_execve; /* Do real work (tail-call).*/
addik r8, r1, PTO; /* add user context as 4th arg */
addik r8, r1, 0; /* add user context as 4th arg */
C_ENTRY(sys_rt_sigreturn_wrapper):
brid sys_rt_sigreturn /* Do real work */
addik r5, r1, PTO; /* add user context as 1st arg */
addik r5, r1, 0; /* add user context as 1st arg */
/*
* HW EXCEPTION rutine start
@ -521,7 +515,7 @@ C_ENTRY(full_exception_trap):
addik r17, r17, -4
SAVE_STATE /* Save registers */
/* PC, before IRQ/trap - this is one instruction above */
swi r17, r1, PTO+PT_PC;
swi r17, r1, PT_PC;
tovirt(r1,r1)
/* FIXME this can be store directly in PT_ESR reg.
* I tested it but there is a fault */
@ -531,7 +525,7 @@ C_ENTRY(full_exception_trap):
mfs r7, rfsr; /* save FSR */
mts rfsr, r0; /* Clear sticky fsr */
rted r0, full_exception
addik r5, r1, PTO /* parameter struct pt_regs * regs */
addik r5, r1, 0 /* parameter struct pt_regs * regs */
/*
* Unaligned data trap.
@ -557,14 +551,14 @@ C_ENTRY(unaligned_data_trap):
lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
SAVE_STATE /* Save registers.*/
/* PC, before IRQ/trap - this is one instruction above */
swi r17, r1, PTO+PT_PC;
swi r17, r1, PT_PC;
tovirt(r1,r1)
/* where the trap should return need -8 to adjust for rtsd r15, 8 */
addik r15, r0, ret_from_exc-8
mfs r3, resr /* ESR */
mfs r4, rear /* EAR */
rtbd r0, _unaligned_data_exception
addik r7, r1, PTO /* parameter struct pt_regs * regs */
addik r7, r1, 0 /* parameter struct pt_regs * regs */
/*
* Page fault traps.
@ -587,30 +581,30 @@ C_ENTRY(unaligned_data_trap):
C_ENTRY(page_fault_data_trap):
SAVE_STATE /* Save registers.*/
/* PC, before IRQ/trap - this is one instruction above */
swi r17, r1, PTO+PT_PC;
swi r17, r1, PT_PC;
tovirt(r1,r1)
/* where the trap should return need -8 to adjust for rtsd r15, 8 */
addik r15, r0, ret_from_exc-8
mfs r6, rear /* parameter unsigned long address */
mfs r7, resr /* parameter unsigned long error_code */
rted r0, do_page_fault
addik r5, r1, PTO /* parameter struct pt_regs * regs */
addik r5, r1, 0 /* parameter struct pt_regs * regs */
C_ENTRY(page_fault_instr_trap):
SAVE_STATE /* Save registers.*/
/* PC, before IRQ/trap - this is one instruction above */
swi r17, r1, PTO+PT_PC;
swi r17, r1, PT_PC;
tovirt(r1,r1)
/* where the trap should return need -8 to adjust for rtsd r15, 8 */
addik r15, r0, ret_from_exc-8
mfs r6, rear /* parameter unsigned long address */
ori r7, r0, 0 /* parameter unsigned long error_code */
rted r0, do_page_fault
addik r5, r1, PTO /* parameter struct pt_regs * regs */
addik r5, r1, 0 /* parameter struct pt_regs * regs */
/* Entry point used to return from an exception. */
C_ENTRY(ret_from_exc):
lwi r11, r1, PTO + PT_MODE;
lwi r11, r1, PT_MODE;
bnei r11, 2f; /* See if returning to kernel mode, */
/* ... if so, skip resched &c. */
@ -642,7 +636,7 @@ C_ENTRY(ret_from_exc):
* complete register state. Here we save anything not saved by
* the normal entry sequence, so that it may be safely restored
* (in a possibly modified form) after do_signal returns. */
addik r5, r1, PTO; /* Arg 1: struct pt_regs *regs */
addik r5, r1, 0; /* Arg 1: struct pt_regs *regs */
addi r7, r0, 0; /* Arg 3: int in_syscall */
bralid r15, do_signal; /* Handle any signals */
add r6, r0, r0; /* Arg 2: sigset_t *oldset */
@ -654,7 +648,7 @@ C_ENTRY(ret_from_exc):
tophys(r1,r1);
RESTORE_REGS;
addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */
addik r1, r1, PT_SIZE /* Clean up stack space. */
lwi r1, r1, PT_R1 - PT_SIZE; /* Restore user stack pointer. */
bri 6f;
@ -663,7 +657,7 @@ C_ENTRY(ret_from_exc):
VM_OFF;
tophys(r1,r1);
RESTORE_REGS;
addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */
addik r1, r1, PT_SIZE /* Clean up stack space. */
tovirt(r1,r1);
6:
@ -696,10 +690,10 @@ C_ENTRY(_interrupt):
tophys(r1,r1); /* MS: I have in r1 physical address where stack is */
/* save registers */
/* MS: Make room on the stack -> activation record */
addik r1, r1, -STATE_SAVE_SIZE;
addik r1, r1, -PT_SIZE;
SAVE_REGS
brid 2f;
swi r1, r1, PTO + PT_MODE; /* 0 - user mode, 1 - kernel mode */
swi r1, r1, PT_MODE; /* 0 - user mode, 1 - kernel mode */
1:
/* User-mode state save. */
/* MS: get the saved current */
@ -709,23 +703,23 @@ C_ENTRY(_interrupt):
addik r1, r1, THREAD_SIZE;
tophys(r1,r1);
/* save registers */
addik r1, r1, -STATE_SAVE_SIZE;
addik r1, r1, -PT_SIZE;
SAVE_REGS
/* calculate mode */
swi r0, r1, PTO + PT_MODE;
swi r0, r1, PT_MODE;
lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
swi r11, r1, PTO+PT_R1;
swi r11, r1, PT_R1;
clear_ums;
2:
lwi CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
tovirt(r1,r1)
addik r15, r0, irq_call;
irq_call:rtbd r0, do_IRQ;
addik r5, r1, PTO;
addik r5, r1, 0;
/* MS: we are in virtual mode */
ret_from_irq:
lwi r11, r1, PTO + PT_MODE;
lwi r11, r1, PT_MODE;
bnei r11, 2f;
lwi r11, CURRENT_TASK, TS_THREAD_INFO;
@ -742,7 +736,7 @@ ret_from_irq:
beqid r11, no_intr_resched
/* Handle a signal return; Pending signals should be in r18. */
addi r7, r0, 0; /* Arg 3: int in_syscall */
addik r5, r1, PTO; /* Arg 1: struct pt_regs *regs */
addik r5, r1, 0; /* Arg 1: struct pt_regs *regs */
bralid r15, do_signal; /* Handle any signals */
add r6, r0, r0; /* Arg 2: sigset_t *oldset */
@ -754,7 +748,7 @@ no_intr_resched:
VM_OFF;
tophys(r1,r1);
RESTORE_REGS
addik r1, r1, STATE_SAVE_SIZE /* MS: Clean up stack space. */
addik r1, r1, PT_SIZE /* MS: Clean up stack space. */
lwi r1, r1, PT_R1 - PT_SIZE;
bri 6f;
/* MS: Return to kernel state. */
@ -782,7 +776,7 @@ restore:
VM_OFF /* MS: turn off MMU */
tophys(r1,r1)
RESTORE_REGS
addik r1, r1, STATE_SAVE_SIZE /* MS: Clean up stack space. */
addik r1, r1, PT_SIZE /* MS: Clean up stack space. */
tovirt(r1,r1);
6:
IRQ_return: /* MS: Make global symbol for debugging */
@ -805,28 +799,28 @@ C_ENTRY(_debug_exception):
lwi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* Reload kernel stack-ptr*/
/* BIP bit is set on entry, no interrupts can occur */
addik r1, r1, CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START - STATE_SAVE_SIZE;
addik r1, r1, CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START - PT_SIZE;
SAVE_REGS;
/* save all regs to pt_reg structure */
swi r0, r1, PTO+PT_R0; /* R0 must be saved too */
swi r14, r1, PTO+PT_R14 /* rewrite saved R14 value */
swi r16, r1, PTO+PT_PC; /* PC and r16 are the same */
swi r0, r1, PT_R0; /* R0 must be saved too */
swi r14, r1, PT_R14 /* rewrite saved R14 value */
swi r16, r1, PT_PC; /* PC and r16 are the same */
/* save special purpose registers to pt_regs */
mfs r11, rear;
swi r11, r1, PTO+PT_EAR;
swi r11, r1, PT_EAR;
mfs r11, resr;
swi r11, r1, PTO+PT_ESR;
swi r11, r1, PT_ESR;
mfs r11, rfsr;
swi r11, r1, PTO+PT_FSR;
swi r11, r1, PT_FSR;
/* stack pointer is in physical address at it is decrease
* by STATE_SAVE_SIZE but we need to get correct R1 value */
addik r11, r1, CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR + STATE_SAVE_SIZE;
swi r11, r1, PTO+PT_R1
* by PT_SIZE but we need to get correct R1 value */
addik r11, r1, CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR + PT_SIZE;
swi r11, r1, PT_R1
/* MS: r31 - current pointer isn't changed */
tovirt(r1,r1)
#ifdef CONFIG_KGDB
addi r5, r1, PTO /* pass pt_reg address as the first arg */
addi r5, r1, 0 /* pass pt_reg address as the first arg */
la r15, r0, dbtrap_call; /* return address */
rtbd r0, microblaze_kgdb_break
nop;
@ -842,16 +836,16 @@ C_ENTRY(_debug_exception):
addik r1, r1, THREAD_SIZE; /* calculate kernel stack pointer */
tophys(r1,r1);
addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */
addik r1, r1, -PT_SIZE; /* Make room on the stack. */
SAVE_REGS;
swi r16, r1, PTO+PT_PC; /* Save LP */
swi r0, r1, PTO + PT_MODE; /* Was in user-mode. */
swi r16, r1, PT_PC; /* Save LP */
swi r0, r1, PT_MODE; /* Was in user-mode. */
lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
swi r11, r1, PTO+PT_R1; /* Store user SP. */
swi r11, r1, PT_R1; /* Store user SP. */
lwi CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
tovirt(r1,r1)
set_vms;
addik r5, r1, PTO;
addik r5, r1, 0;
addik r15, r0, dbtrap_call;
dbtrap_call: /* Return point for kernel/user entry + 8 because of rtsd r15, 8 */
rtbd r0, sw_exception
@ -859,7 +853,7 @@ dbtrap_call: /* Return point for kernel/user entry + 8 because of rtsd r15, 8 */
/* MS: The first instruction for the second part of the gdb/kgdb */
set_bip; /* Ints masked for state restore */
lwi r11, r1, PTO + PT_MODE;
lwi r11, r1, PT_MODE;
bnei r11, 2f;
/* MS: Return to user space - gdb */
/* Get current task ptr into r11 */
@ -878,7 +872,7 @@ dbtrap_call: /* Return point for kernel/user entry + 8 because of rtsd r15, 8 */
andi r11, r11, _TIF_SIGPENDING;
beqi r11, 1f; /* Signals to handle, handle them */
addik r5, r1, PTO; /* Arg 1: struct pt_regs *regs */
addik r5, r1, 0; /* Arg 1: struct pt_regs *regs */
addi r7, r0, 0; /* Arg 3: int in_syscall */
bralid r15, do_signal; /* Handle any signals */
add r6, r0, r0; /* Arg 2: sigset_t *oldset */
@ -889,7 +883,7 @@ dbtrap_call: /* Return point for kernel/user entry + 8 because of rtsd r15, 8 */
tophys(r1,r1);
/* MS: Restore all regs */
RESTORE_REGS
addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space */
addik r1, r1, PT_SIZE /* Clean up stack space */
lwi r1, r1, PT_R1 - PT_SIZE; /* Restore user stack pointer */
DBTRAP_return_user: /* MS: Make global symbol for debugging */
rtbd r16, 0; /* MS: Instructions to return from a debug trap */
@ -900,9 +894,9 @@ DBTRAP_return_user: /* MS: Make global symbol for debugging */
tophys(r1,r1);
/* MS: Restore all regs */
RESTORE_REGS
lwi r14, r1, PTO+PT_R14;
lwi r16, r1, PTO+PT_PC;
addik r1, r1, STATE_SAVE_SIZE; /* MS: Clean up stack space */
lwi r14, r1, PT_R14;
lwi r16, r1, PT_PC;
addik r1, r1, PT_SIZE; /* MS: Clean up stack space */
tovirt(r1,r1);
DBTRAP_return_kernel: /* MS: Make global symbol for debugging */
rtbd r16, 0; /* MS: Instructions to return from a debug trap */

16
arch/microblaze/kernel/hw_exception_handler.S
View File

@ -93,7 +93,7 @@
lwi r6, r1, PT_R6; \
lwi r11, r1, PT_R11; \
lwi r31, r1, PT_R31; \
lwi r1, r0, TOPHYS(r0_ram + 0);
lwi r1, r1, PT_R1;
#endif /* CONFIG_MMU */
#define LWREG_NOP \
@ -208,8 +208,8 @@
* | . |
* | . |
*
* NO_MMU kernel use the same r0_ram pointed space - look to vmlinux.lds.S
* which is used for storing register values - old style was, that value were
* MMU kernel uses the same 'pt_pool_space' pointed space
* which is used for storing register values - noMMu style was, that values were
* stored in stack but in case of failure you lost information about register.
* Currently you can see register value in memory in specific place.
* In compare to with previous solution the speed should be the same.
@ -228,8 +228,12 @@
*/
/* wrappers to restore state before coming to entry.S */
#ifdef CONFIG_MMU
.section .data
.align 4
pt_pool_space:
.space PT_SIZE
#ifdef DEBUG
/* Create space for exception counting. */
.section .data
@ -299,10 +303,10 @@ _hw_exception_handler:
#ifndef CONFIG_MMU
addik r1, r1, -(EX_HANDLER_STACK_SIZ); /* Create stack frame */
#else
swi r1, r0, TOPHYS(r0_ram + 0); /* GET_SP */
swi r1, r0, TOPHYS(pt_pool_space + PT_R1); /* GET_SP */
/* Save date to kernel memory. Here is the problem
* when you came from user space */
ori r1, r0, TOPHYS(r0_ram + 28);
ori r1, r0, TOPHYS(pt_pool_space);
#endif
swi r3, r1, PT_R3
swi r4, r1, PT_R4

2
arch/microblaze/kernel/process.c
View File

@ -159,7 +159,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
}
/* FIXME STATE_SAVE_PT_OFFSET; */
ti->cpu_context.r1 = (unsigned long)childregs - STATE_SAVE_ARG_SPACE;
ti->cpu_context.r1 = (unsigned long)childregs;
/* we should consider the fact that childregs is a copy of the parent
* regs which were saved immediately after entering the kernel state
* before enabling VM. This MSR will be restored in switch_to and

4
arch/microblaze/kernel/signal.c
View File

@ -93,7 +93,7 @@ static int restore_sigcontext(struct pt_regs *regs,
asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
{
struct rt_sigframe __user *frame =
(struct rt_sigframe __user *)(regs->r1 + STATE_SAVE_ARG_SPACE);
(struct rt_sigframe __user *)(regs->r1);
sigset_t set;
int rval;
@ -247,7 +247,7 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
goto give_sigsegv;
/* Set up registers for signal handler */
regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE;
regs->r1 = (unsigned long) frame;
/* Signal handler args: */
regs->r5 = signal; /* arg 0: signum */

5
arch/microblaze/kernel/vmlinux.lds.S
View File

@ -70,11 +70,6 @@ SECTIONS {
RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
_edata = . ;
/* Reserve some low RAM for r0 based memory references */
. = ALIGN(0x4) ;
r0_ram = . ;
. = . + PAGE_SIZE; /* a page should be enough */
/* Under the microblaze ABI, .sdata and .sbss must be contiguous */
. = ALIGN(8);
.sdata : AT(ADDR(.sdata) - LOAD_OFFSET) {