dect/linux-2.6
Archived
14
0
Fork 0
Code Releases Activity

ARM: 6354/1: nomadik-gpio: allow control of sleep mode direction and pull up

Browse source 
DB8500v2 allows control of direction and pull up/down configuration in
sleep mode, instead of switching the pin to input with pull up/down
enabled.

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Rabin Vincent 2010-09-02 11:28:48 +01:00 committed by Russell King
parent 7e3f7e59cc
commit 6720db7cc5
2 changed files with 61 additions and 12 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

42
arch/arm/plat-nomadik/gpio.c
View file

@ -102,6 +102,22 @@ static void __nmk_gpio_make_input(struct nmk_gpio_chip *nmk_chip,
writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
}
static void __nmk_gpio_set_output(struct nmk_gpio_chip *nmk_chip,
unsigned offset, int val)
{
if (val)
writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATS);
else
writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATC);
}
static void __nmk_gpio_make_output(struct nmk_gpio_chip *nmk_chip,
unsigned offset, int val)
{
writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
__nmk_gpio_set_output(nmk_chip, offset, val);
}
static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset,
pin_cfg_t cfg)
{
@ -126,12 +142,21 @@ static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset,
int pull = PIN_PULL(cfg);
int af = PIN_ALT(cfg);
int slpm = PIN_SLPM(cfg);
int output = PIN_DIR(cfg);
int val = PIN_VAL(cfg);
dev_dbg(nmk_chip->chip.dev, "pin %d: af %s, pull %s, slpm %s\n",
pin, afnames[af], pullnames[pull], slpmnames[slpm]);
dev_dbg(nmk_chip->chip.dev, "pin %d: af %s, pull %s, slpm %s (%s%s)\n",
pin, afnames[af], pullnames[pull], slpmnames[slpm],
output ? "output " : "input",
output ? (val ? "high" : "low") : "");
if (output)
__nmk_gpio_make_output(nmk_chip, offset, val);
else {
__nmk_gpio_make_input(nmk_chip, offset);
__nmk_gpio_set_pull(nmk_chip, offset, pull);
}
__nmk_gpio_make_input(nmk_chip, offset);
__nmk_gpio_set_pull(nmk_chip, offset, pull);
__nmk_gpio_set_slpm(nmk_chip, offset, slpm);
__nmk_gpio_set_mode(nmk_chip, offset, af);
}
@ -519,12 +544,8 @@ static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
{
struct nmk_gpio_chip *nmk_chip =
container_of(chip, struct nmk_gpio_chip, chip);
u32 bit = 1 << offset;
if (val)
writel(bit, nmk_chip->addr + NMK_GPIO_DATS);
else
writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
__nmk_gpio_set_output(nmk_chip, offset, val);
}
static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
@ -533,8 +554,7 @@ static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
struct nmk_gpio_chip *nmk_chip =
container_of(chip, struct nmk_gpio_chip, chip);
writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
nmk_gpio_set_output(chip, offset, val);
__nmk_gpio_make_output(nmk_chip, offset, val);
return 0;
}

31
arch/arm/plat-nomadik/include/plat/pincfg.h
View file

@ -19,12 +19,16 @@
* bit 9..10 - Alternate Function Selection
* bit 11..12 - Pull up/down state
* bit 13 - Sleep mode behaviour
* bit 14 - (sleep mode) Direction
* bit 15 - (sleep mode) Value (if output)
*
* to facilitate the definition, the following macros are provided
*
* PIN_CFG_DEFAULT - default config (0):
* pull up/down = disabled
* sleep mode = input/wakeup
* (sleep mode) direction = input
* (sleep mode) value = low
*
* PIN_CFG - default config with alternate function
* PIN_CFG_PULL - default config with alternate function and pull up/down
@ -53,12 +57,37 @@ typedef unsigned long pin_cfg_t;
#define PIN_SLPM_SHIFT 13
#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT)
#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT)
#define PIN_SLPM_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT)
/* These two replace the above in DB8500v2+ */
#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT)
#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT)
#define PIN_DIR_SHIFT 14
#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT)
#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT)
#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT)
#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT)
#define PIN_VAL_SHIFT 15
#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT)
#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT)
#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT)
#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT)
/* Shortcuts. Use these instead of separate DIR and VAL. */
#define PIN_INPUT PIN_DIR_INPUT
#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW)
#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH)
/*
* These are the same as the ones above, but should make more sense to the
* reader when seen along with a setting a pin to AF mode.
*/
#define PIN_SLPM_INPUT PIN_INPUT
#define PIN_SLPM_OUTPUT_LOW PIN_OUTPUT_LOW
#define PIN_SLPM_OUTPUT_HIGH PIN_OUTPUT_HIGH
#define PIN_CFG_DEFAULT (PIN_PULL_NONE | PIN_SLPM_INPUT)
#define PIN_CFG(num, alt) \