dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

ARM: mach-s3c2400: delete 

On Tue, 28 Jun 2011, Ben Dooks wrote:

> On Tue, Jun 28, 2011 at 11:22:57PM +0200, Arnd Bergmann wrote:
>
> > On a related note, what about mach-s3c2400? It seems to be even more
> > incomplete.
>
> Probably the same fate awaits that. It is so old that there's little
> incentive to do anything with it.

So out it goes as well.

The PORT_S3C2400 definition in include/linux/serial_core.h is left there
to prevent a reuse of the same number for another port type.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Nicolas Pitre 2011-07-05 23:44:31 -04:00 committed by Nicolas Pitre
parent af0e060e24
commit 632b7cf6c0
18 changed files with 7 additions and 580 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
Documentation/arm/Samsung-S3C24XX/Overview.txt
View File

@ -8,10 +8,13 @@ Introduction
The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
S3C2412, S3C2413, S3C2416 S3C2440, S3C2442, S3C2443 and S3C2450 devices
S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 and S3C2450 devices
are supported.
Support for the S3C2400 and S3C24A0 series are in progress.
Support for the S3C2400 and S3C24A0 series was never completed and the
corresponding code has been removed after a while. If someone wishes to
revive this effort, partial support can be retrieved from earlier Linux
versions.
The S3C2416 and S3C2450 devices are very similar and S3C2450 support is
included under the arch/arm/mach-s3c2416 directory. Note, whilst core

1
arch/arm/Kconfig
View File

@ -969,7 +969,6 @@ source "arch/arm/plat-spear/Kconfig"
source "arch/arm/plat-tcc/Kconfig"
if ARCH_S3C2410
source "arch/arm/mach-s3c2400/Kconfig"
source "arch/arm/mach-s3c2410/Kconfig"
source "arch/arm/mach-s3c2412/Kconfig"
source "arch/arm/mach-s3c2416/Kconfig"

2
arch/arm/Makefile
View File

@ -172,7 +172,7 @@ machine-$(CONFIG_ARCH_PNX4008) := pnx4008
machine-$(CONFIG_ARCH_PXA) := pxa
machine-$(CONFIG_ARCH_REALVIEW) := realview
machine-$(CONFIG_ARCH_RPC) := rpc
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2412 s3c2416 s3c2440 s3c2443
machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0
machine-$(CONFIG_ARCH_S5PC100) := s5pc100

7
arch/arm/mach-s3c2400/Kconfig
View File

@ -1,7 +0,0 @@
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
menu "S3C2400 Machines"
endmenu

15
arch/arm/mach-s3c2400/Makefile
View File

@ -1,15 +0,0 @@
# arch/arm/mach-s3c2400/Makefile
#
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
obj-y :=
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_CPU_S3C2400) += gpio.o
# Machine support

42
arch/arm/mach-s3c2400/gpio.c
View File

@ -1,42 +0,0 @@
/* linux/arch/arm/mach-s3c2400/gpio.c
*
* Copyright (c) 2006 Lucas Correia Villa Real <lucasvr@gobolinux.org>
*
* S3C2400 GPIO support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <mach/regs-gpio.h>
int s3c2400_gpio_getirq(unsigned int pin)
{
if (pin < S3C2410_GPE(0) || pin > S3C2400_GPE(7))
return -EINVAL; /* not valid interrupts */
return (pin - S3C2410_GPE(0)) + IRQ_EINT0;
}
EXPORT_SYMBOL(s3c2400_gpio_getirq);

66
arch/arm/mach-s3c2400/include/mach/map.h
View File

@ -1,66 +0,0 @@
/* arch/arm/mach-s3c2400/include/mach/map.h
*
* Copyright 2003-2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* Copyright 2003, Lucas Correia Villa Real
*
* S3C2400 - Memory map definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define S3C2400_PA_MEMCTRL (0x14000000)
#define S3C2400_PA_USBHOST (0x14200000)
#define S3C2400_PA_IRQ (0x14400000)
#define S3C2400_PA_DMA (0x14600000)
#define S3C2400_PA_CLKPWR (0x14800000)
#define S3C2400_PA_LCD (0x14A00000)
#define S3C2400_PA_UART (0x15000000)
#define S3C2400_PA_TIMER (0x15100000)
#define S3C2400_PA_USBDEV (0x15200140)
#define S3C2400_PA_WATCHDOG (0x15300000)
#define S3C2400_PA_IIC (0x15400000)
#define S3C2400_PA_IIS (0x15508000)
#define S3C2400_PA_GPIO (0x15600000)
#define S3C2400_PA_RTC (0x15700040)
#define S3C2400_PA_ADC (0x15800000)
#define S3C2400_PA_SPI (0x15900000)
#define S3C2400_PA_MMC (0x15A00000)
#define S3C2400_SZ_MMC SZ_1M
/* physical addresses of all the chip-select areas */
#define S3C2400_CS0 (0x00000000)
#define S3C2400_CS1 (0x02000000)
#define S3C2400_CS2 (0x04000000)
#define S3C2400_CS3 (0x06000000)
#define S3C2400_CS4 (0x08000000)
#define S3C2400_CS5 (0x0A000000)
#define S3C2400_CS6 (0x0C000000)
#define S3C2400_CS7 (0x0E000000)
#define S3C2400_SDRAM_PA (S3C2400_CS6)
/* Use a single interface for common resources between S3C24XX cpus */
#define S3C24XX_PA_IRQ S3C2400_PA_IRQ
#define S3C24XX_PA_MEMCTRL S3C2400_PA_MEMCTRL
#define S3C24XX_PA_USBHOST S3C2400_PA_USBHOST
#define S3C24XX_PA_DMA S3C2400_PA_DMA
#define S3C24XX_PA_CLKPWR S3C2400_PA_CLKPWR
#define S3C24XX_PA_LCD S3C2400_PA_LCD
#define S3C24XX_PA_UART S3C2400_PA_UART
#define S3C24XX_PA_TIMER S3C2400_PA_TIMER
#define S3C24XX_PA_USBDEV S3C2400_PA_USBDEV
#define S3C24XX_PA_WATCHDOG S3C2400_PA_WATCHDOG
#define S3C24XX_PA_IIC S3C2400_PA_IIC
#define S3C24XX_PA_IIS S3C2400_PA_IIS
#define S3C24XX_PA_GPIO S3C2400_PA_GPIO
#define S3C24XX_PA_RTC S3C2400_PA_RTC
#define S3C24XX_PA_ADC S3C2400_PA_ADC
#define S3C24XX_PA_SPI S3C2400_PA_SPI

6
arch/arm/mach-s3c2410/include/mach/gpio-fns.h
View File

@ -52,12 +52,6 @@ extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
extern int s3c2410_gpio_getirq(unsigned int pin);
#ifdef CONFIG_CPU_S3C2400
extern int s3c2400_gpio_getirq(unsigned int pin);
#endif /* CONFIG_CPU_S3C2400 */
/* s3c2410_gpio_irqfilter
*
* set the irq filtering on the given pin

241
arch/arm/mach-s3c2410/include/mach/regs-gpio.h
View File

@ -16,11 +16,7 @@
#include <mach/gpio-nrs.h>
#ifdef CONFIG_CPU_S3C2400
#define S3C24XX_MISCCR S3C2400_MISCCR
#else
#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80)
#endif /* CONFIG_CPU_S3C2400 */
/* general configuration options */
@ -42,67 +38,33 @@
/* configure GPIO ports A..G */
/* port A - S3C2410: 22bits, zero in bit X makes pin X output
* S3C2400: 18bits, zero in bit X makes pin X output
* 1 makes port special function, this is default
*/
#define S3C2410_GPACON S3C2410_GPIOREG(0x00)
#define S3C2410_GPADAT S3C2410_GPIOREG(0x04)
#define S3C2400_GPACON S3C2410_GPIOREG(0x00)
#define S3C2400_GPADAT S3C2410_GPIOREG(0x04)
#define S3C2410_GPA0_ADDR0 (1<<0)
#define S3C2410_GPA1_ADDR16 (1<<1)
#define S3C2410_GPA2_ADDR17 (1<<2)
#define S3C2410_GPA3_ADDR18 (1<<3)
#define S3C2410_GPA4_ADDR19 (1<<4)
#define S3C2410_GPA5_ADDR20 (1<<5)
#define S3C2410_GPA6_ADDR21 (1<<6)
#define S3C2410_GPA7_ADDR22 (1<<7)
#define S3C2410_GPA8_ADDR23 (1<<8)
#define S3C2410_GPA9_ADDR24 (1<<9)
#define S3C2410_GPA10_ADDR25 (1<<10)
#define S3C2400_GPA10_SCKE (1<<10)
#define S3C2410_GPA11_ADDR26 (1<<11)
#define S3C2400_GPA11_nCAS0 (1<<11)
#define S3C2410_GPA12_nGCS1 (1<<12)
#define S3C2400_GPA12_nCAS1 (1<<12)
#define S3C2410_GPA13_nGCS2 (1<<13)
#define S3C2400_GPA13_nGCS1 (1<<13)
#define S3C2410_GPA14_nGCS3 (1<<14)
#define S3C2400_GPA14_nGCS2 (1<<14)
#define S3C2410_GPA15_nGCS4 (1<<15)
#define S3C2400_GPA15_nGCS3 (1<<15)
#define S3C2410_GPA16_nGCS5 (1<<16)
#define S3C2400_GPA16_nGCS4 (1<<16)
#define S3C2410_GPA17_CLE (1<<17)
#define S3C2400_GPA17_nGCS5 (1<<17)
#define S3C2410_GPA18_ALE (1<<18)
#define S3C2410_GPA19_nFWE (1<<19)
#define S3C2410_GPA20_nFRE (1<<20)
#define S3C2410_GPA21_nRSTOUT (1<<21)
#define S3C2410_GPA22_nFCE (1<<22)
/* 0x08 and 0x0c are reserved on S3C2410 */
@ -111,10 +73,6 @@
* GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
* 00 = input, 01 = output, 10=special function, 11=reserved
* S3C2400:
* GPB is 16 IO pins, each configured by 2 bits each in GPBCON.
* 00 = input, 01 = output, 10=data, 11=special function
* bit 0,1 = pin 0, 2,3= pin 1...
*
* CPBUP = pull up resistor control, 1=disabled, 0=enabled
@ -124,78 +82,35 @@
#define S3C2410_GPBDAT S3C2410_GPIOREG(0x14)
#define S3C2410_GPBUP S3C2410_GPIOREG(0x18)
#define S3C2400_GPBCON S3C2410_GPIOREG(0x08)
#define S3C2400_GPBDAT S3C2410_GPIOREG(0x0C)
#define S3C2400_GPBUP S3C2410_GPIOREG(0x10)
/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
#define S3C2410_GPB0_TOUT0 (0x02 << 0)
#define S3C2400_GPB0_DATA16 (0x02 << 0)
#define S3C2410_GPB1_TOUT1 (0x02 << 2)
#define S3C2400_GPB1_DATA17 (0x02 << 2)
#define S3C2410_GPB2_TOUT2 (0x02 << 4)
#define S3C2400_GPB2_DATA18 (0x02 << 4)
#define S3C2400_GPB2_TCLK1 (0x03 << 4)
#define S3C2410_GPB3_TOUT3 (0x02 << 6)
#define S3C2400_GPB3_DATA19 (0x02 << 6)
#define S3C2400_GPB3_TXD1 (0x03 << 6)
#define S3C2410_GPB4_TCLK0 (0x02 << 8)
#define S3C2400_GPB4_DATA20 (0x02 << 8)
#define S3C2410_GPB4_MASK (0x03 << 8)
#define S3C2400_GPB4_RXD1 (0x03 << 8)
#define S3C2400_GPB4_MASK (0x03 << 8)
#define S3C2410_GPB5_nXBACK (0x02 << 10)
#define S3C2443_GPB5_XBACK (0x03 << 10)
#define S3C2400_GPB5_DATA21 (0x02 << 10)
#define S3C2400_GPB5_nCTS1 (0x03 << 10)
#define S3C2410_GPB6_nXBREQ (0x02 << 12)
#define S3C2443_GPB6_XBREQ (0x03 << 12)
#define S3C2400_GPB6_DATA22 (0x02 << 12)
#define S3C2400_GPB6_nRTS1 (0x03 << 12)
#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
#define S3C2443_GPB7_XDACK1 (0x03 << 14)
#define S3C2400_GPB7_DATA23 (0x02 << 14)
#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
#define S3C2400_GPB8_DATA24 (0x02 << 16)
#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
#define S3C2443_GPB9_XDACK0 (0x03 << 18)
#define S3C2400_GPB9_DATA25 (0x02 << 18)
#define S3C2400_GPB9_I2SSDI (0x03 << 18)
#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
#define S3C2400_GPB10_DATA26 (0x02 << 20)
#define S3C2400_GPB10_nSS (0x03 << 20)
#define S3C2400_GPB11_INP (0x00 << 22)
#define S3C2400_GPB11_OUTP (0x01 << 22)
#define S3C2400_GPB11_DATA27 (0x02 << 22)
#define S3C2400_GPB12_INP (0x00 << 24)
#define S3C2400_GPB12_OUTP (0x01 << 24)
#define S3C2400_GPB12_DATA28 (0x02 << 24)
#define S3C2400_GPB13_INP (0x00 << 26)
#define S3C2400_GPB13_OUTP (0x01 << 26)
#define S3C2400_GPB13_DATA29 (0x02 << 26)
#define S3C2400_GPB14_INP (0x00 << 28)
#define S3C2400_GPB14_OUTP (0x01 << 28)
#define S3C2400_GPB14_DATA30 (0x02 << 28)
#define S3C2400_GPB15_INP (0x00 << 30)
#define S3C2400_GPB15_OUTP (0x01 << 30)
#define S3C2400_GPB15_DATA31 (0x02 << 30)
#define S3C2410_GPB_PUPDIS(x) (1<<(x))
@ -208,59 +123,22 @@
#define S3C2410_GPCCON S3C2410_GPIOREG(0x20)
#define S3C2410_GPCDAT S3C2410_GPIOREG(0x24)
#define S3C2410_GPCUP S3C2410_GPIOREG(0x28)
#define S3C2400_GPCCON S3C2410_GPIOREG(0x14)
#define S3C2400_GPCDAT S3C2410_GPIOREG(0x18)
#define S3C2400_GPCUP S3C2410_GPIOREG(0x1C)
#define S3C2410_GPC0_LEND (0x02 << 0)
#define S3C2400_GPC0_VD0 (0x02 << 0)
#define S3C2410_GPC1_VCLK (0x02 << 2)
#define S3C2400_GPC1_VD1 (0x02 << 2)
#define S3C2410_GPC2_VLINE (0x02 << 4)
#define S3C2400_GPC2_VD2 (0x02 << 4)
#define S3C2410_GPC3_VFRAME (0x02 << 6)
#define S3C2400_GPC3_VD3 (0x02 << 6)
#define S3C2410_GPC4_VM (0x02 << 8)
#define S3C2400_GPC4_VD4 (0x02 << 8)
#define S3C2410_GPC5_LCDVF0 (0x02 << 10)
#define S3C2400_GPC5_VD5 (0x02 << 10)
#define S3C2410_GPC6_LCDVF1 (0x02 << 12)
#define S3C2400_GPC6_VD6 (0x02 << 12)
#define S3C2410_GPC7_LCDVF2 (0x02 << 14)
#define S3C2400_GPC7_VD7 (0x02 << 14)
#define S3C2410_GPC8_VD0 (0x02 << 16)
#define S3C2400_GPC8_VD8 (0x02 << 16)
#define S3C2410_GPC9_VD1 (0x02 << 18)
#define S3C2400_GPC9_VD9 (0x02 << 18)
#define S3C2410_GPC10_VD2 (0x02 << 20)
#define S3C2400_GPC10_VD10 (0x02 << 20)
#define S3C2410_GPC11_VD3 (0x02 << 22)
#define S3C2400_GPC11_VD11 (0x02 << 22)
#define S3C2410_GPC12_VD4 (0x02 << 24)
#define S3C2400_GPC12_VD12 (0x02 << 24)
#define S3C2410_GPC13_VD5 (0x02 << 26)
#define S3C2400_GPC13_VD13 (0x02 << 26)
#define S3C2410_GPC14_VD6 (0x02 << 28)
#define S3C2400_GPC14_VD14 (0x02 << 28)
#define S3C2410_GPC15_VD7 (0x02 << 30)
#define S3C2400_GPC15_VD15 (0x02 << 30)
#define S3C2410_GPC_PUPDIS(x) (1<<(x))
/*
@ -269,8 +147,6 @@
* almost identical setup to port b, but the special functions are mostly
* to do with the video system's data.
*
* S3C2400: Port D consists of 11 GPIO/Special function
*
* almost identical setup to port c
*/
@ -278,46 +154,31 @@
#define S3C2410_GPDDAT S3C2410_GPIOREG(0x34)
#define S3C2410_GPDUP S3C2410_GPIOREG(0x38)
#define S3C2400_GPDCON S3C2410_GPIOREG(0x20)
#define S3C2400_GPDDAT S3C2410_GPIOREG(0x24)
#define S3C2400_GPDUP S3C2410_GPIOREG(0x28)
#define S3C2410_GPD0_VD8 (0x02 << 0)
#define S3C2400_GPD0_VFRAME (0x02 << 0)
#define S3C2442_GPD0_nSPICS1 (0x03 << 0)
#define S3C2410_GPD1_VD9 (0x02 << 2)
#define S3C2400_GPD1_VM (0x02 << 2)
#define S3C2442_GPD1_SPICLK1 (0x03 << 2)
#define S3C2410_GPD2_VD10 (0x02 << 4)
#define S3C2400_GPD2_VLINE (0x02 << 4)
#define S3C2410_GPD3_VD11 (0x02 << 6)
#define S3C2400_GPD3_VCLK (0x02 << 6)
#define S3C2410_GPD4_VD12 (0x02 << 8)
#define S3C2400_GPD4_LEND (0x02 << 8)
#define S3C2410_GPD5_VD13 (0x02 << 10)
#define S3C2400_GPD5_TOUT0 (0x02 << 10)
#define S3C2410_GPD6_VD14 (0x02 << 12)
#define S3C2400_GPD6_TOUT1 (0x02 << 12)
#define S3C2410_GPD7_VD15 (0x02 << 14)
#define S3C2400_GPD7_TOUT2 (0x02 << 14)
#define S3C2410_GPD8_VD16 (0x02 << 16)
#define S3C2400_GPD8_TOUT3 (0x02 << 16)
#define S3C2440_GPD8_SPIMISO1 (0x03 << 16)
#define S3C2410_GPD9_VD17 (0x02 << 18)
#define S3C2400_GPD9_TCLK0 (0x02 << 18)
#define S3C2440_GPD9_SPIMOSI1 (0x03 << 18)
#define S3C2410_GPD10_VD18 (0x02 << 20)
#define S3C2400_GPD10_nWAIT (0x02 << 20)
#define S3C2440_GPD10_SPICLK1 (0x03 << 20)
#define S3C2410_GPD11_VD19 (0x02 << 22)
@ -340,9 +201,6 @@
* again, the same as port B, but dealing with I2S, SDI, and
* more miscellaneous functions
*
* S3C2400:
* Port E consists of 12 GPIO/Special function
*
* GPIO / interrupt inputs
*/
@ -350,74 +208,51 @@
#define S3C2410_GPEDAT S3C2410_GPIOREG(0x44)
#define S3C2410_GPEUP S3C2410_GPIOREG(0x48)
#define S3C2400_GPECON S3C2410_GPIOREG(0x2C)
#define S3C2400_GPEDAT S3C2410_GPIOREG(0x30)
#define S3C2400_GPEUP S3C2410_GPIOREG(0x34)
#define S3C2410_GPE0_I2SLRCK (0x02 << 0)
#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
#define S3C2400_GPE0_EINT0 (0x02 << 0)
#define S3C2410_GPE0_MASK (0x03 << 0)
#define S3C2410_GPE1_I2SSCLK (0x02 << 2)
#define S3C2443_GPE1_AC_SYNC (0x03 << 2)
#define S3C2400_GPE1_EINT1 (0x02 << 2)
#define S3C2400_GPE1_nSS (0x03 << 2)
#define S3C2410_GPE1_MASK (0x03 << 2)
#define S3C2410_GPE2_CDCLK (0x02 << 4)
#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
#define S3C2400_GPE2_EINT2 (0x02 << 4)
#define S3C2400_GPE2_I2SSDI (0x03 << 4)
#define S3C2410_GPE3_I2SSDI (0x02 << 6)
#define S3C2443_GPE3_AC_SDI (0x03 << 6)
#define S3C2400_GPE3_EINT3 (0x02 << 6)
#define S3C2400_GPE3_nCTS1 (0x03 << 6)
#define S3C2410_GPE3_nSS0 (0x03 << 6)
#define S3C2410_GPE3_MASK (0x03 << 6)
#define S3C2410_GPE4_I2SSDO (0x02 << 8)
#define S3C2443_GPE4_AC_SDO (0x03 << 8)
#define S3C2400_GPE4_EINT4 (0x02 << 8)
#define S3C2400_GPE4_nRTS1 (0x03 << 8)
#define S3C2410_GPE4_I2SSDI (0x03 << 8)
#define S3C2410_GPE4_MASK (0x03 << 8)
#define S3C2410_GPE5_SDCLK (0x02 << 10)
#define S3C2443_GPE5_SD1_CLK (0x02 << 10)
#define S3C2400_GPE5_EINT5 (0x02 << 10)
#define S3C2400_GPE5_TCLK1 (0x03 << 10)
#define S3C2443_GPE5_AC_BITCLK (0x03 << 10)
#define S3C2410_GPE6_SDCMD (0x02 << 12)
#define S3C2443_GPE6_SD1_CMD (0x02 << 12)
#define S3C2443_GPE6_AC_SDI (0x03 << 12)
#define S3C2400_GPE6_EINT6 (0x02 << 12)
#define S3C2410_GPE7_SDDAT0 (0x02 << 14)
#define S3C2443_GPE5_SD1_DAT0 (0x02 << 14)
#define S3C2443_GPE7_AC_SDO (0x03 << 14)
#define S3C2400_GPE7_EINT7 (0x02 << 14)
#define S3C2410_GPE8_SDDAT1 (0x02 << 16)
#define S3C2443_GPE8_SD1_DAT1 (0x02 << 16)
#define S3C2443_GPE8_AC_SYNC (0x03 << 16)
#define S3C2400_GPE8_nXDACK0 (0x02 << 16)
#define S3C2410_GPE9_SDDAT2 (0x02 << 18)
#define S3C2443_GPE9_SD1_DAT2 (0x02 << 18)
#define S3C2443_GPE9_AC_nRESET (0x03 << 18)
#define S3C2400_GPE9_nXDACK1 (0x02 << 18)
#define S3C2400_GPE9_nXBACK (0x03 << 18)
#define S3C2410_GPE10_SDDAT3 (0x02 << 20)
#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
#define S3C2400_GPE10_nXDREQ0 (0x02 << 20)
#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
#define S3C2400_GPE11_nXDREQ1 (0x02 << 22)
#define S3C2400_GPE11_nXBREQ (0x03 << 22)
#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
@ -447,9 +282,6 @@
*
* pull up works like all other ports.
*
* S3C2400:
* Port F consists of 7 GPIO/Special function
*
* GPIO/serial/misc pins
*/
@ -457,37 +289,14 @@
#define S3C2410_GPFDAT S3C2410_GPIOREG(0x54)
#define S3C2410_GPFUP S3C2410_GPIOREG(0x58)
#define S3C2400_GPFCON S3C2410_GPIOREG(0x38)
#define S3C2400_GPFDAT S3C2410_GPIOREG(0x3C)
#define S3C2400_GPFUP S3C2410_GPIOREG(0x40)
#define S3C2410_GPF0_EINT0 (0x02 << 0)
#define S3C2400_GPF0_RXD0 (0x02 << 0)
#define S3C2410_GPF1_EINT1 (0x02 << 2)
#define S3C2400_GPF1_RXD1 (0x02 << 2)
#define S3C2400_GPF1_IICSDA (0x03 << 2)
#define S3C2410_GPF2_EINT2 (0x02 << 4)
#define S3C2400_GPF2_TXD0 (0x02 << 4)
#define S3C2410_GPF3_EINT3 (0x02 << 6)
#define S3C2400_GPF3_TXD1 (0x02 << 6)
#define S3C2400_GPF3_IICSCL (0x03 << 6)
#define S3C2410_GPF4_EINT4 (0x02 << 8)
#define S3C2400_GPF4_nRTS0 (0x02 << 8)
#define S3C2400_GPF4_nXBACK (0x03 << 8)
#define S3C2410_GPF5_EINT5 (0x02 << 10)
#define S3C2400_GPF5_nCTS0 (0x02 << 10)
#define S3C2400_GPF5_nXBREQ (0x03 << 10)
#define S3C2410_GPF6_EINT6 (0x02 << 12)
#define S3C2400_GPF6_CLKOUT (0x02 << 12)
#define S3C2410_GPF7_EINT7 (0x02 << 14)
#define S3C2410_GPF_PUPDIS(x) (1<<(x))
/* S3C2410:
@ -497,62 +306,38 @@
* 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
*
* pull up works like all other ports.
*
* S3C2400:
* Port G consists of 10 GPIO/Special function
*/
#define S3C2410_GPGCON S3C2410_GPIOREG(0x60)
#define S3C2410_GPGDAT S3C2410_GPIOREG(0x64)
#define S3C2410_GPGUP S3C2410_GPIOREG(0x68)
#define S3C2400_GPGCON S3C2410_GPIOREG(0x44)
#define S3C2400_GPGDAT S3C2410_GPIOREG(0x48)
#define S3C2400_GPGUP S3C2410_GPIOREG(0x4C)
#define S3C2410_GPG0_EINT8 (0x02 << 0)
#define S3C2400_GPG0_I2SLRCK (0x02 << 0)
#define S3C2410_GPG1_EINT9 (0x02 << 2)
#define S3C2400_GPG1_I2SSCLK (0x02 << 2)
#define S3C2410_GPG2_EINT10 (0x02 << 4)
#define S3C2410_GPG2_nSS0 (0x03 << 4)
#define S3C2400_GPG2_CDCLK (0x02 << 4)
#define S3C2410_GPG3_EINT11 (0x02 << 6)
#define S3C2410_GPG3_nSS1 (0x03 << 6)
#define S3C2400_GPG3_I2SSDO (0x02 << 6)
#define S3C2400_GPG3_I2SSDI (0x03 << 6)
#define S3C2410_GPG4_EINT12 (0x02 << 8)
#define S3C2400_GPG4_MMCCLK (0x02 << 8)
#define S3C2400_GPG4_I2SSDI (0x03 << 8)
#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
#define S3C2410_GPG5_EINT13 (0x02 << 10)
#define S3C2400_GPG5_MMCCMD (0x02 << 10)
#define S3C2400_GPG5_IICSDA (0x03 << 10)
#define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */
#define S3C2410_GPG6_EINT14 (0x02 << 12)
#define S3C2400_GPG6_MMCDAT (0x02 << 12)
#define S3C2400_GPG6_IICSCL (0x03 << 12)
#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
#define S3C2410_GPG7_EINT15 (0x02 << 14)
#define S3C2410_GPG7_SPICLK1 (0x03 << 14)
#define S3C2400_GPG7_SPIMISO (0x02 << 14)
#define S3C2400_GPG7_IICSDA (0x03 << 14)
#define S3C2410_GPG8_EINT16 (0x02 << 16)
#define S3C2400_GPG8_SPIMOSI (0x02 << 16)
#define S3C2400_GPG8_IICSCL (0x03 << 16)
#define S3C2410_GPG9_EINT17 (0x02 << 18)
#define S3C2400_GPG9_SPICLK (0x02 << 18)
#define S3C2400_GPG9_MMCCLK (0x03 << 18)
#define S3C2410_GPG10_EINT18 (0x02 << 20)
@ -660,7 +445,6 @@
#define S3C2443_GPMUP S3C2410_GPIOREG(0x108)
/* miscellaneous control */
#define S3C2400_MISCCR S3C2410_GPIOREG(0x54)
#define S3C2410_MISCCR S3C2410_GPIOREG(0x80)
#define S3C2410_DCLKCON S3C2410_GPIOREG(0x84)
@ -674,14 +458,6 @@
#define S3C2410_MISCCR_SPUCR_LEN (0<<1)
#define S3C2410_MISCCR_SPUCR_LDIS (1<<1)
#define S3C2400_MISCCR_SPUCR_LEN (0<<0)
#define S3C2400_MISCCR_SPUCR_LDIS (1<<0)
#define S3C2400_MISCCR_SPUCR_HEN (0<<1)
#define S3C2400_MISCCR_SPUCR_HDIS (1<<1)
#define S3C2400_MISCCR_HZ_STOPEN (0<<2)
#define S3C2400_MISCCR_HZ_STOPPREV (1<<2)
#define S3C2410_MISCCR_USBDEV (0<<3)
#define S3C2410_MISCCR_USBHOST (1<<3)
@ -728,7 +504,6 @@
*
* Samsung datasheet p9-25
*/
#define S3C2400_EXTINT0 S3C2410_GPIOREG(0x58)
#define S3C2410_EXTINT0 S3C2410_GPIOREG(0x88)
#define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C)
#define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90)
@ -796,22 +571,6 @@
#define S3C2410_GSTATUS2_OFFRESET (1<<1)
#define S3C2410_GSTATUS2_PONRESET (1<<0)
/* open drain control register */
#define S3C2400_OPENCR S3C2410_GPIOREG(0x50)
#define S3C2400_OPENCR_OPC_RXD1DIS (0<<0)
#define S3C2400_OPENCR_OPC_RXD1EN (1<<0)
#define S3C2400_OPENCR_OPC_TXD1DIS (0<<1)
#define S3C2400_OPENCR_OPC_TXD1EN (1<<1)
#define S3C2400_OPENCR_OPC_CMDDIS (0<<2)
#define S3C2400_OPENCR_OPC_CMDEN (1<<2)
#define S3C2400_OPENCR_OPC_DATDIS (0<<3)
#define S3C2400_OPENCR_OPC_DATEN (1<<3)
#define S3C2400_OPENCR_OPC_MISODIS (0<<4)
#define S3C2400_OPENCR_OPC_MISOEN (1<<4)
#define S3C2400_OPENCR_OPC_MOSIDIS (0<<5)
#define S3C2400_OPENCR_OPC_MOSIEN (1<<5)
/* 2412/2413 sleep configuration registers */
#define S3C2412_GPBSLPCON S3C2410_GPIOREG(0x1C)

28
arch/arm/mach-s3c2410/include/mach/regs-mem.h
View File

@ -145,29 +145,8 @@
#define S3C2410_BANKCON_Tacs_SHIFT (13)
#define S3C2410_BANKCON_SRAM (0x0 << 15)
#define S3C2400_BANKCON_EDODRAM (0x2 << 15)
#define S3C2410_BANKCON_SDRAM (0x3 << 15)
/* next bits only for EDO DRAM in 6,7 */
#define S3C2400_BANKCON_EDO_Trcd1 (0x00 << 4)
#define S3C2400_BANKCON_EDO_Trcd2 (0x01 << 4)
#define S3C2400_BANKCON_EDO_Trcd3 (0x02 << 4)
#define S3C2400_BANKCON_EDO_Trcd4 (0x03 << 4)
/* CAS pulse width */
#define S3C2400_BANKCON_EDO_PULSE1 (0x00 << 3)
#define S3C2400_BANKCON_EDO_PULSE2 (0x01 << 3)
/* CAS pre-charge */
#define S3C2400_BANKCON_EDO_TCP1 (0x00 << 2)
#define S3C2400_BANKCON_EDO_TCP2 (0x01 << 2)
/* control column address select */
#define S3C2400_BANKCON_EDO_SCANb8 (0x00 << 0)
#define S3C2400_BANKCON_EDO_SCANb9 (0x01 << 0)
#define S3C2400_BANKCON_EDO_SCANb10 (0x02 << 0)
#define S3C2400_BANKCON_EDO_SCANb11 (0x03 << 0)
/* next bits only for SDRAM in 6,7 */
#define S3C2410_BANKCON_Trcd2 (0x00 << 2)
#define S3C2410_BANKCON_Trcd3 (0x01 << 2)
@ -194,12 +173,6 @@
#define S3C2410_REFRESH_TRP_3clk (1<<20)
#define S3C2410_REFRESH_TRP_4clk (2<<20)
#define S3C2400_REFRESH_DRAM_TRP_MASK (3<<20)
#define S3C2400_REFRESH_DRAM_TRP_1_5clk (0<<20)
#define S3C2400_REFRESH_DRAM_TRP_2_5clk (1<<20)
#define S3C2400_REFRESH_DRAM_TRP_3_5clk (2<<20)
#define S3C2400_REFRESH_DRAM_TRP_4_5clk (3<<20)
#define S3C2410_REFRESH_TSRC_MASK (3<<18)
#define S3C2410_REFRESH_TSRC_4clk (0<<18)
#define S3C2410_REFRESH_TSRC_5clk (1<<18)
@ -222,7 +195,6 @@
#define S3C2410_BANKSIZE_4M (0x5 << 0)
#define S3C2410_BANKSIZE_2M (0x4 << 0)
#define S3C2410_BANKSIZE_MASK (0x7 << 0)
#define S3C2400_BANKSIZE_MASK (0x4 << 0)
#define S3C2410_BANKSIZE_SCLK_EN (1<<4)
#define S3C2410_BANKSIZE_SCKE_EN (1<<5)
#define S3C2410_BANKSIZE_BURST (1<<7)

2
arch/arm/mach-s3c2412/Kconfig
View File

@ -15,7 +15,7 @@ config CPU_S3C2412
config CPU_S3C2412_ONLY
bool
depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
depends on ARCH_S3C2410 && !CPU_S3C2410 && \
!CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
!CPU_S3C2443 && CPU_S3C2412
default y if CPU_S3C2412

15
arch/arm/plat-s3c24xx/cpu.c
View File

@ -46,7 +46,6 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/s3c2400.h>
#include <plat/s3c2410.h>
#include <plat/s3c2412.h>
#include <plat/s3c2416.h>
@ -55,7 +54,6 @@
/* table of supported CPUs */
static const char name_s3c2400[] = "S3C2400";
static const char name_s3c2410[] = "S3C2410";
static const char name_s3c2412[] = "S3C2412";
static const char name_s3c2416[] = "S3C2416/S3C2450";
@ -157,15 +155,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.init = s3c2443_init,
.name = name_s3c2443,
},
{
.idcode = 0x0, /* S3C2400 doesn't have an idcode */
.idmask = 0xffffffff,
.map_io = s3c2400_map_io,
.init_clocks = s3c2400_init_clocks,
.init_uarts = s3c2400_init_uarts,
.init = s3c2400_init,
.name = name_s3c2400
},
};
/* minimal IO mapping */
@ -200,11 +189,7 @@ static unsigned long s3c24xx_read_idcode_v5(void)
static unsigned long s3c24xx_read_idcode_v4(void)
{
#ifndef CONFIG_CPU_S3C2400
return __raw_readl(S3C2410_GSTATUS1);
#else
return 0UL;
#endif
}
/* Hook for arm_pm_restart to ensure we execute the reset code

9
arch/arm/plat-s3c24xx/include/plat/regs-iis.h
View File

@ -64,14 +64,5 @@
#define S3C2410_IISFCON_RXMASK (0x3f)
#define S3C2410_IISFCON_RXSHIFT (0)
#define S3C2400_IISFCON_TXDMA (1<<11)
#define S3C2400_IISFCON_RXDMA (1<<10)
#define S3C2400_IISFCON_TXENABLE (1<<9)
#define S3C2400_IISFCON_RXENABLE (1<<8)
#define S3C2400_IISFCON_TXMASK (0x07 << 4)
#define S3C2400_IISFCON_TXSHIFT (4)
#define S3C2400_IISFCON_RXMASK (0x07)
#define S3C2400_IISFCON_RXSHIFT (0)
#define S3C2410_IISFIFO (0x10)
#endif /* __ASM_ARCH_REGS_IIS_H */

1
arch/arm/plat-s3c24xx/include/plat/regs-spi.h
View File

@ -67,7 +67,6 @@
#define S3C2410_SPPIN_ENMUL (1<<2) /* Multi Master Error detect */
#define S3C2410_SPPIN_RESERVED (1<<1)
#define S3C2400_SPPIN_nCS (1<<1) /* SPI Card Select */
#define S3C2410_SPPIN_KEEP (1<<0) /* Master Out keep */
#define S3C2410_SPPRE (0x0C)

31
arch/arm/plat-s3c24xx/include/plat/s3c2400.h
View File

@ -1,31 +0,0 @@
/* linux/include/asm-arm/plat-s3c24xx/s3c2400.h
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Header file for S3C2400 cpu support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Modifications:
* 09-Fev-2006 LCVR First version, based on s3c2410.h
*/
#ifdef CONFIG_CPU_S3C2400
extern int s3c2400_init(void);
extern void s3c2400_map_io(void);
extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void s3c2400_init_clocks(int xtal);
#else
#define s3c2400_init_clocks NULL
#define s3c2400_init_uarts NULL
#define s3c2400_map_io NULL
#define s3c2400_init NULL
#endif

8
drivers/tty/serial/Kconfig
View File

@ -457,7 +457,6 @@ config SERIAL_SAMSUNG_UARTS_4
config SERIAL_SAMSUNG_UARTS
int
depends on ARM && PLAT_SAMSUNG
default 2 if ARCH_S3C2400
default 6 if ARCH_S5P6450
default 4 if SERIAL_SAMSUNG_UARTS_4
default 3
@ -489,13 +488,6 @@ config SERIAL_SAMSUNG_CONSOLE
your boot loader about how to pass options to the kernel at
boot time.)
config SERIAL_S3C2400
tristate "Samsung S3C2410 Serial port support"
depends on ARM && SERIAL_SAMSUNG && CPU_S3C2400
default y if CPU_S3C2400
help
Serial port support for the Samsung S3C2400 SoC
config SERIAL_S3C2410
tristate "Samsung S3C2410 Serial port support"
depends on SERIAL_SAMSUNG && CPU_S3C2410

1
drivers/tty/serial/Makefile
View File

@ -38,7 +38,6 @@ obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o
obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.o
obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o

105
drivers/tty/serial/s3c2400.c
View File

@ -1,105 +0,0 @@
/*
* Driver for Samsung SoC onboard UARTs.
*
* Ben Dooks, Copyright (c) 2003-2005 Simtec Electronics
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include "samsung.h"
static int s3c2400_serial_getsource(struct uart_port *port,
struct s3c24xx_uart_clksrc *clk)
{
clk->divisor = 1;
clk->name = "pclk";
return 0;
}
static int s3c2400_serial_setsource(struct uart_port *port,
struct s3c24xx_uart_clksrc *clk)
{
return 0;
}
static int s3c2400_serial_resetport(struct uart_port *port,
struct s3c2410_uartcfg *cfg)
{
dbg("s3c2400_serial_resetport: port=%p (%08lx), cfg=%p\n",
port, port->mapbase, cfg);
wr_regl(port, S3C2410_UCON, cfg->ucon);
wr_regl(port, S3C2410_ULCON, cfg->ulcon);
/* reset both fifos */
wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
wr_regl(port, S3C2410_UFCON, cfg->ufcon);
return 0;
}
static struct s3c24xx_uart_info s3c2400_uart_inf = {
.name = "Samsung S3C2400 UART",
.type = PORT_S3C2400,
.fifosize = 16,
.rx_fifomask = S3C2410_UFSTAT_RXMASK,
.rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
.rx_fifofull = S3C2410_UFSTAT_RXFULL,
.tx_fifofull = S3C2410_UFSTAT_TXFULL,
.tx_fifomask = S3C2410_UFSTAT_TXMASK,
.tx_fifoshift = S3C2410_UFSTAT_TXSHIFT,
.get_clksrc = s3c2400_serial_getsource,
.set_clksrc = s3c2400_serial_setsource,
.reset_port = s3c2400_serial_resetport,
};
static int s3c2400_serial_probe(struct platform_device *dev)
{
return s3c24xx_serial_probe(dev, &s3c2400_uart_inf);
}
static struct platform_driver s3c2400_serial_driver = {
.probe = s3c2400_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
.name = "s3c2400-uart",
.owner = THIS_MODULE,
},
};
s3c24xx_console_init(&s3c2400_serial_driver, &s3c2400_uart_inf);
static inline int s3c2400_serial_init(void)
{
return s3c24xx_serial_init(&s3c2400_serial_driver, &s3c2400_uart_inf);
}
static inline void s3c2400_serial_exit(void)
{
platform_driver_unregister(&s3c2400_serial_driver);
}
module_init(s3c2400_serial_init);
module_exit(s3c2400_serial_exit);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
MODULE_DESCRIPTION("Samsung S3C2400 SoC Serial port driver");
MODULE_ALIAS("platform:s3c2400-uart");