[RAPIDIO] Add serial RapidIO controller support, which includes MPC8548, MPC8641
Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
This commit is contained in:
Zhang Wei
Paul Mackerras
parent
182e143bee
commit
61b269179d
|
|
@ -21,6 +21,7 @@
|
|||
#include <linux/rio.h>
|
||||
#include <linux/rio_drv.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/delay.h>
|
||||
|
||||
#include <asm/io.h>
|
||||
|
||||
|
|
@ -30,7 +31,12 @@
|
|||
#define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq)
|
||||
|
||||
#define RIO_ATMU_REGS_OFFSET 0x10c00
|
||||
#define RIO_MSG_REGS_OFFSET 0x11000
|
||||
#define RIO_P_MSG_REGS_OFFSET 0x11000
|
||||
#define RIO_S_MSG_REGS_OFFSET 0x13000
|
||||
#define RIO_ESCSR 0x158
|
||||
#define RIO_CCSR 0x15c
|
||||
#define RIO_ISR_AACR 0x10120
|
||||
#define RIO_ISR_AACR_AA 0x1 /* Accept All ID */
|
||||
#define RIO_MAINT_WIN_SIZE 0x400000
|
||||
#define RIO_DBELL_WIN_SIZE 0x1000
|
||||
|
||||
|
|
@ -69,7 +75,7 @@
|
|||
|
||||
struct rio_atmu_regs {
|
||||
u32 rowtar;
|
||||
u32 pad1;
|
||||
u32 rowtear;
|
||||
u32 rowbar;
|
||||
u32 pad2;
|
||||
u32 rowar;
|
||||
|
|
@ -95,7 +101,15 @@ struct rio_msg_regs {
|
|||
u32 ifqdpar;
|
||||
u32 pad6;
|
||||
u32 ifqepar;
|
||||
u32 pad7[250];
|
||||
u32 pad7[226];
|
||||
u32 odmr;
|
||||
u32 odsr;
|
||||
u32 res0[4];
|
||||
u32 oddpr;
|
||||
u32 oddatr;
|
||||
u32 res1[3];
|
||||
u32 odretcr;
|
||||
u32 res2[12];
|
||||
u32 dmr;
|
||||
u32 dsr;
|
||||
u32 pad8;
|
||||
|
|
@ -175,8 +189,22 @@ static int fsl_rio_doorbell_send(struct rio_mport *mport,
|
|||
struct rio_priv *priv = mport->priv;
|
||||
pr_debug("fsl_doorbell_send: index %d destid %4.4x data %4.4x\n",
|
||||
index, destid, data);
|
||||
out_be32(&priv->dbell_atmu_regs->rowtar, destid << 22);
|
||||
out_be16(priv->dbell_win, data);
|
||||
switch (mport->phy_type) {
|
||||
case RIO_PHY_PARALLEL:
|
||||
out_be32(&priv->dbell_atmu_regs->rowtar, destid << 22);
|
||||
out_be16(priv->dbell_win, data);
|
||||
break;
|
||||
case RIO_PHY_SERIAL:
|
||||
/* In the serial version silicons, such as MPC8548, MPC8641,
|
||||
* below operations is must be.
|
||||
*/
|
||||
out_be32(&priv->msg_regs->odmr, 0x00000000);
|
||||
out_be32(&priv->msg_regs->odretcr, 0x00000004);
|
||||
out_be32(&priv->msg_regs->oddpr, destid << 16);
|
||||
out_be32(&priv->msg_regs->oddatr, data);
|
||||
out_be32(&priv->msg_regs->odmr, 0x00000001);
|
||||
break;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -342,11 +370,22 @@ rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
|
|||
memset(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot]
|
||||
+ len, 0, RIO_MAX_MSG_SIZE - len);
|
||||
|
||||
/* Set mbox field for message */
|
||||
desc->dport = mbox & 0x3;
|
||||
switch (mport->phy_type) {
|
||||
case RIO_PHY_PARALLEL:
|
||||
/* Set mbox field for message */
|
||||
desc->dport = mbox & 0x3;
|
||||
|
||||
/* Enable EOMI interrupt, set priority, and set destid */
|
||||
desc->dattr = 0x28000000 | (rdev->destid << 2);
|
||||
/* Enable EOMI interrupt, set priority, and set destid */
|
||||
desc->dattr = 0x28000000 | (rdev->destid << 2);
|
||||
break;
|
||||
case RIO_PHY_SERIAL:
|
||||
/* Set mbox field for message, and set destid */
|
||||
desc->dport = (rdev->destid << 16) | (mbox & 0x3);
|
||||
|
||||
/* Enable EOMI interrupt and priority */
|
||||
desc->dattr = 0x28000000;
|
||||
break;
|
||||
}
|
||||
|
||||
/* Set transfer size aligned to next power of 2 (in double words) */
|
||||
desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
|
||||
|
|
@ -920,6 +959,7 @@ int fsl_rio_setup(struct of_device *dev)
|
|||
const u32 *dt_range, *cell;
|
||||
struct resource regs;
|
||||
int rlen;
|
||||
u32 ccsr;
|
||||
u64 law_start, law_size;
|
||||
int paw, aw, sw;
|
||||
|
||||
|
|
@ -1008,6 +1048,14 @@ int fsl_rio_setup(struct of_device *dev)
|
|||
|
||||
priv->regs_win = ioremap(regs.start, regs.end - regs.start + 1);
|
||||
|
||||
/* Probe the master port phy type */
|
||||
ccsr = in_be32(priv->regs_win + RIO_CCSR);
|
||||
port->phy_type = (ccsr & 1) ? RIO_PHY_SERIAL : RIO_PHY_PARALLEL;
|
||||
dev_info(&dev->dev, "RapidIO PHY type: %s\n",
|
||||
(port->phy_type == RIO_PHY_PARALLEL) ? "parallel" :
|
||||
((port->phy_type == RIO_PHY_SERIAL) ? "serial" :
|
||||
"unknown"));
|
||||
|
||||
port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
|
||||
& RIO_PEF_CTLS) >> 4;
|
||||
dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
|
||||
|
|
@ -1017,8 +1065,13 @@ int fsl_rio_setup(struct of_device *dev)
|
|||
+ RIO_ATMU_REGS_OFFSET);
|
||||
priv->maint_atmu_regs = priv->atmu_regs + 1;
|
||||
priv->dbell_atmu_regs = priv->atmu_regs + 2;
|
||||
priv->msg_regs = (struct rio_msg_regs *)(priv->regs_win
|
||||
+ RIO_MSG_REGS_OFFSET);
|
||||
priv->msg_regs = (struct rio_msg_regs *)(priv->regs_win +
|
||||
((port->phy_type == RIO_PHY_SERIAL) ?
|
||||
RIO_S_MSG_REGS_OFFSET : RIO_P_MSG_REGS_OFFSET));
|
||||
|
||||
/* Set to receive any dist ID for serial RapidIO controller. */
|
||||
if (port->phy_type == RIO_PHY_SERIAL)
|
||||
out_be32((priv->regs_win + RIO_ISR_AACR), RIO_ISR_AACR_AA);
|
||||
|
||||
/* Configure maintenance transaction window */
|
||||
out_be32(&priv->maint_atmu_regs->rowbar, 0x000c0000);
|
||||
|
|
|
|||
|
|
@ -145,6 +145,11 @@ struct rio_dbell {
|
|||
void *dev_id;
|
||||
};
|
||||
|
||||
enum rio_phy_type {
|
||||
RIO_PHY_PARALLEL,
|
||||
RIO_PHY_SERIAL,
|
||||
};
|
||||
|
||||
/**
|
||||
* struct rio_mport - RIO master port info
|
||||
* @dbells: List of doorbell events
|
||||
|
|
@ -178,6 +183,7 @@ struct rio_mport {
|
|||
* 0 - Small size. 256 devices.
|
||||
* 1 - Large size, 65536 devices.
|
||||
*/
|
||||
enum rio_phy_type phy_type; /* RapidIO phy type */
|
||||
unsigned char name[40];
|
||||
void *priv; /* Master port private data */
|
||||
};
|
||||
|
|
|
|||
Reference in New Issue