USB: add iuu_phoenix driver
Signed-off-by: Alain Degreffe <eczema@ecze.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Alain Degreffe
Greg Kroah-Hartman
parent
c74e809565
commit
60a8fc0171
|
|
@ -0,0 +1,84 @@
|
|||
Infinity Usb Unlimited Readme
|
||||
-----------------------------
|
||||
|
||||
Hi all,
|
||||
|
||||
|
||||
This module provide a serial interface to use your
|
||||
IUU unit in phoenix mode. Loading this module will
|
||||
bring a ttyUSB[0-x] interface. This driver must be
|
||||
used by your favorite application to pilot the IUU
|
||||
|
||||
This driver is still in beta stage, so bugs can
|
||||
occur and your system may freeze. As far I now,
|
||||
I never had any problem with it, but I'm not a real
|
||||
guru, so don't blame me if your system is unstable
|
||||
|
||||
You can plug more than one IUU. Every unit will
|
||||
have his own device file(/dev/ttyUSB0,/dev/ttyUSB1,...)
|
||||
|
||||
|
||||
|
||||
How to tune the reader speed ?
|
||||
|
||||
A few parameters can be used at load time
|
||||
To use parameters, just unload the module if it is
|
||||
already loaded and use modprobe iuu_phoenix param=value.
|
||||
In case of prebuilt module, use the command
|
||||
insmod iuu_phoenix param=value.
|
||||
|
||||
Example:
|
||||
|
||||
modprobe iuu_phoenix clockmode=3
|
||||
|
||||
The parameters are:
|
||||
|
||||
parm: clockmode:1=3Mhz579,2=3Mhz680,3=6Mhz (int)
|
||||
parm: boost:overclock boost percent 100 to 500 (int)
|
||||
parm: cdmode:Card detect mode 0=none, 1=CD, 2=!CD, 3=DSR, 4=!DSR, 5=CTS, 6=!CTS, 7=RING, 8=!RING (int)
|
||||
parm: xmas:xmas color enabled or not (bool)
|
||||
parm: debug:Debug enabled or not (bool)
|
||||
|
||||
- clockmode will provide 3 different base settings commonly adopted by
|
||||
different software:
|
||||
1. 3Mhz579
|
||||
2. 3Mhz680
|
||||
3. 6Mhz
|
||||
|
||||
- boost provide a way to overclock the reader ( my favorite :-) )
|
||||
For example to have best performance than a simple clockmode=3, try this:
|
||||
|
||||
modprobe boost=195
|
||||
|
||||
This will put the reader in a base of 3Mhz579 but boosted a 195 % !
|
||||
the real clock will be now : 6979050 Hz ( 6Mhz979 ) and will increase
|
||||
the speed to a score 10 to 20% better than the simple clockmode=3 !!!
|
||||
|
||||
|
||||
- cdmode permit to setup the signal used to inform the userland ( ioctl answer )
|
||||
if the card is present or not. Eight signals are possible.
|
||||
|
||||
- xmas is completely useless except for your eyes. This is one of my friend who was
|
||||
so sad to have a nice device like the iuu without seeing all color range available.
|
||||
So I have added this option to permit him to see a lot of color ( each activity change the color
|
||||
and the frequency randomly )
|
||||
|
||||
- debug will produce a lot of debugging messages...
|
||||
|
||||
|
||||
Last notes:
|
||||
|
||||
Don't worry about the serial settings, the serial emulation
|
||||
is an abstraction, so use any speed or parity setting will
|
||||
work. ( This will not change anything ).Later I will perhaps
|
||||
use this settings to deduce de boost but is that feature
|
||||
really necessary ?
|
||||
The autodetect feature used is the serial CD. If that doesn't
|
||||
work for your software, disable detection mechanism in it.
|
||||
|
||||
|
||||
Have fun !
|
||||
|
||||
Alain Degreffe
|
||||
|
||||
eczema(at)ecze.com
|
||||
|
|
@ -282,6 +282,17 @@ config USB_SERIAL_IPW
|
|||
To compile this driver as a module, choose M here: the
|
||||
module will be called ipw.
|
||||
|
||||
config USB_SERIAL_IUU
|
||||
tristate "USB Infinity USB Unlimited Phoenix Driver (Experimental)"
|
||||
depends on USB_SERIAL && EXPERIMENTAL
|
||||
help
|
||||
Say Y here if you want to use a IUU in phoenix mode and get
|
||||
an extra ttyUSBx device. More information available on
|
||||
http://eczema.ecze.com/iuu_phoenix.html
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called iuu_phoenix.o
|
||||
|
||||
config USB_SERIAL_KEYSPAN_PDA
|
||||
tristate "USB Keyspan PDA Single Port Serial Driver"
|
||||
depends on USB_SERIAL
|
||||
|
|
|
|||
|
|
@ -30,6 +30,7 @@ obj-$(CONFIG_USB_SERIAL_GARMIN) += garmin_gps.o
|
|||
obj-$(CONFIG_USB_SERIAL_HP4X) += hp4x.o
|
||||
obj-$(CONFIG_USB_SERIAL_IPAQ) += ipaq.o
|
||||
obj-$(CONFIG_USB_SERIAL_IPW) += ipw.o
|
||||
obj-$(CONFIG_USB_SERIAL_IUU) += iuu_phoenix.o
|
||||
obj-$(CONFIG_USB_SERIAL_IR) += ir-usb.o
|
||||
obj-$(CONFIG_USB_SERIAL_KEYSPAN) += keyspan.o
|
||||
obj-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda.o
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,122 @@
|
|||
/*
|
||||
* Infinity Unlimited USB Phoenix driver
|
||||
*
|
||||
* Copyright (C) 2007 Alain Degreffe (eczema@ecze.com)
|
||||
*
|
||||
*
|
||||
* Original code taken from iuutool ( Copyright (C) 2006 Juan Carlos Borrás )
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* And tested with help of WB Electronics
|
||||
*
|
||||
*/
|
||||
|
||||
#define IUU_USB_VENDOR_ID 0x104f
|
||||
#define IUU_USB_PRODUCT_ID 0x0004
|
||||
#define IUU_USB_OP_TIMEOUT 0x0200
|
||||
|
||||
/* Programmer commands */
|
||||
|
||||
#define IUU_NO_OPERATION 0x00
|
||||
#define IUU_GET_FIRMWARE_VERSION 0x01
|
||||
#define IUU_GET_PRODUCT_NAME 0x02
|
||||
#define IUU_GET_STATE_REGISTER 0x03
|
||||
#define IUU_SET_LED 0x04
|
||||
#define IUU_WAIT_MUS 0x05
|
||||
#define IUU_WAIT_MS 0x06
|
||||
#define IUU_GET_LOADER_VERSION 0x50
|
||||
#define IUU_RST_SET 0x52
|
||||
#define IUU_RST_CLEAR 0x53
|
||||
#define IUU_SET_VCC 0x59
|
||||
#define IUU_UART_ENABLE 0x49
|
||||
#define IUU_UART_DISABLE 0x4A
|
||||
#define IUU_UART_WRITE_I2C 0x4C
|
||||
#define IUU_UART_ESC 0x5E
|
||||
#define IUU_UART_TRAP 0x54
|
||||
#define IUU_UART_TRAP_BREAK 0x5B
|
||||
#define IUU_UART_RX 0x56
|
||||
#define IUU_AVR_ON 0x21
|
||||
#define IUU_AVR_OFF 0x22
|
||||
#define IUU_AVR_1CLK 0x23
|
||||
#define IUU_AVR_RESET 0x24
|
||||
#define IUU_AVR_RESET_PC 0x25
|
||||
#define IUU_AVR_INC_PC 0x26
|
||||
#define IUU_AVR_INCN_PC 0x27
|
||||
#define IUU_AVR_PREAD 0x29
|
||||
#define IUU_AVR_PREADN 0x2A
|
||||
#define IUU_AVR_PWRITE 0x28
|
||||
#define IUU_AVR_DREAD 0x2C
|
||||
#define IUU_AVR_DREADN 0x2D
|
||||
#define IUU_AVR_DWRITE 0x2B
|
||||
#define IUU_AVR_PWRITEN 0x2E
|
||||
#define IUU_EEPROM_ON 0x37
|
||||
#define IUU_EEPROM_OFF 0x38
|
||||
#define IUU_EEPROM_WRITE 0x39
|
||||
#define IUU_EEPROM_WRITEX 0x3A
|
||||
#define IUU_EEPROM_WRITE8 0x3B
|
||||
#define IUU_EEPROM_WRITE16 0x3C
|
||||
#define IUU_EEPROM_WRITEX32 0x3D
|
||||
#define IUU_EEPROM_WRITEX64 0x3E
|
||||
#define IUU_EEPROM_READ 0x3F
|
||||
#define IUU_EEPROM_READX 0x40
|
||||
#define IUU_EEPROM_BREAD 0x41
|
||||
#define IUU_EEPROM_BREADX 0x42
|
||||
#define IUU_PIC_CMD 0x0A
|
||||
#define IUU_PIC_CMD_LOAD 0x0B
|
||||
#define IUU_PIC_CMD_READ 0x0C
|
||||
#define IUU_PIC_ON 0x0D
|
||||
#define IUU_PIC_OFF 0x0E
|
||||
#define IUU_PIC_RESET 0x16
|
||||
#define IUU_PIC_INC_PC 0x0F
|
||||
#define IUU_PIC_INCN_PC 0x10
|
||||
#define IUU_PIC_PWRITE 0x11
|
||||
#define IUU_PIC_PREAD 0x12
|
||||
#define IUU_PIC_PREADN 0x13
|
||||
#define IUU_PIC_DWRITE 0x14
|
||||
#define IUU_PIC_DREAD 0x15
|
||||
#define IUU_UART_NOP 0x00
|
||||
#define IUU_UART_CHANGE 0x02
|
||||
#define IUU_UART_TX 0x04
|
||||
#define IUU_DELAY_MS 0x06
|
||||
|
||||
#define IUU_OPERATION_OK 0x00
|
||||
#define IUU_DEVICE_NOT_FOUND 0x01
|
||||
#define IUU_INVALID_HANDLE 0x02
|
||||
#define IUU_INVALID_PARAMETER 0x03
|
||||
#define IUU_INVALID_voidERFACE 0x04
|
||||
#define IUU_INVALID_REQUEST_LENGTH 0x05
|
||||
#define IUU_UART_NOT_ENABLED 0x06
|
||||
#define IUU_WRITE_ERROR 0x07
|
||||
#define IUU_READ_ERROR 0x08
|
||||
#define IUU_TX_ERROR 0x09
|
||||
#define IUU_RX_ERROR 0x0A
|
||||
|
||||
#define IUU_PARITY_NONE 0x00
|
||||
#define IUU_PARITY_EVEN 0x01
|
||||
#define IUU_PARITY_ODD 0x02
|
||||
#define IUU_PARITY_MARK 0x03
|
||||
#define IUU_PARITY_SPACE 0x04
|
||||
#define IUU_SC_INSERTED 0x01
|
||||
#define IUU_VERIFY_ERROR 0x02
|
||||
#define IUU_SIM_INSERTED 0x04
|
||||
#define IUU_TWO_STOP_BITS 0x00
|
||||
#define IUU_ONE_STOP_BIT 0x20
|
||||
#define IUU_BAUD_2400 0x0398
|
||||
#define IUU_BAUD_9600 0x0298
|
||||
#define IUU_BAUD_19200 0x0164
|
||||
#define IUU_BAUD_28800 0x0198
|
||||
#define IUU_BAUD_38400 0x01B2
|
||||
#define IUU_BAUD_57600 0x0030
|
||||
#define IUU_BAUD_115200 0x0098
|
||||
#define IUU_CLK_3579000 3579000
|
||||
#define IUU_CLK_3680000 3680000
|
||||
#define IUU_CLK_6000000 6000000
|
||||
#define IUU_FULLCARD_IN 0x01
|
||||
#define IUU_DEV_ERROR 0x02
|
||||
#define IUU_MINICARD_IN 0x04
|
||||
#define IUU_VCC_5V 0x00
|
||||
#define IUU_VCC_3V 0x01
|
||||
Reference in New Issue