mfd: Add HTCPLD driver
This change introduces a driver for the HTC PLD chip found on some smartphones, such as the HTC Wizard and HTC Herald. It works through the I2C bus and acts as a GPIO extender. Specifically: * it can have several sub-devices, each with its own I2C address * Each sub-device provides 8 output and 8 input pins * The chip attaches to one GPIO to signal when any of the input GPIOs change -- at which point all chips must be scanned for changes This driver implements the GPIOs throught the kernel's GPIO and IRQ framework. This allows any GPIO-servicing drivers to operate on htcpld pins, such as the gpio-keys and gpio-leds drivers. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
Cory Maccarrone
Samuel Ortiz
parent
08ff6f2a99
commit
6048a3dd23
|
|
@ -78,6 +78,15 @@ config HTC_PASIC3
|
|||
HTC Magician devices, respectively. Actual functionality is
|
||||
handled by the leds-pasic3 and ds1wm drivers.
|
||||
|
||||
config HTC_I2CPLD
|
||||
bool "HTC I2C PLD chip support"
|
||||
depends on I2C=y
|
||||
help
|
||||
If you say yes here you get support for the supposed CPLD
|
||||
found on omap850 HTC devices like the HTC Wizard and HTC Herald.
|
||||
This device provides input and output GPIOs through an I2C
|
||||
interface to one or more sub-chips.
|
||||
|
||||
config UCB1400_CORE
|
||||
tristate "Philips UCB1400 Core driver"
|
||||
depends on AC97_BUS
|
||||
|
|
|
|||
|
|
@ -10,6 +10,7 @@ obj-$(CONFIG_MFD_SH_MOBILE_SDHI) += sh_mobile_sdhi.o
|
|||
|
||||
obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o
|
||||
obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o
|
||||
obj-$(CONFIG_HTC_I2CPLD) += htc-i2cpld.o
|
||||
|
||||
obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,710 @@
|
|||
/*
|
||||
* htc-i2cpld.c
|
||||
* Chip driver for an unknown CPLD chip found on omap850 HTC devices like
|
||||
* the HTC Wizard and HTC Herald.
|
||||
* The cpld is located on the i2c bus and acts as an input/output GPIO
|
||||
* extender.
|
||||
*
|
||||
* Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com>
|
||||
*
|
||||
* Based on work done in the linwizard project
|
||||
* Copyright (C) 2008-2009 Angelo Arrifano <miknix@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/spinlock.h>
|
||||
#include <linux/htcpld.h>
|
||||
#include <linux/gpio.h>
|
||||
|
||||
struct htcpld_chip {
|
||||
spinlock_t lock;
|
||||
|
||||
/* chip info */
|
||||
u8 reset;
|
||||
u8 addr;
|
||||
struct device *dev;
|
||||
struct i2c_client *client;
|
||||
|
||||
/* Output details */
|
||||
u8 cache_out;
|
||||
struct gpio_chip chip_out;
|
||||
|
||||
/* Input details */
|
||||
u8 cache_in;
|
||||
struct gpio_chip chip_in;
|
||||
|
||||
u16 irqs_enabled;
|
||||
uint irq_start;
|
||||
int nirqs;
|
||||
|
||||
/*
|
||||
* Work structure to allow for setting values outside of any
|
||||
* possible interrupt context
|
||||
*/
|
||||
struct work_struct set_val_work;
|
||||
};
|
||||
|
||||
struct htcpld_data {
|
||||
/* irq info */
|
||||
u16 irqs_enabled;
|
||||
uint irq_start;
|
||||
int nirqs;
|
||||
uint chained_irq;
|
||||
unsigned int int_reset_gpio_hi;
|
||||
unsigned int int_reset_gpio_lo;
|
||||
|
||||
/* htcpld info */
|
||||
struct htcpld_chip *chip;
|
||||
unsigned int nchips;
|
||||
};
|
||||
|
||||
/* There does not appear to be a way to proactively mask interrupts
|
||||
* on the htcpld chip itself. So, we simply ignore interrupts that
|
||||
* aren't desired. */
|
||||
static void htcpld_mask(unsigned int irq)
|
||||
{
|
||||
struct htcpld_chip *chip = get_irq_chip_data(irq);
|
||||
chip->irqs_enabled &= ~(1 << (irq - chip->irq_start));
|
||||
pr_debug("HTCPLD mask %d %04x\n", irq, chip->irqs_enabled);
|
||||
}
|
||||
static void htcpld_unmask(unsigned int irq)
|
||||
{
|
||||
struct htcpld_chip *chip = get_irq_chip_data(irq);
|
||||
chip->irqs_enabled |= 1 << (irq - chip->irq_start);
|
||||
pr_debug("HTCPLD unmask %d %04x\n", irq, chip->irqs_enabled);
|
||||
}
|
||||
|
||||
static int htcpld_set_type(unsigned int irq, unsigned int flags)
|
||||
{
|
||||
struct irq_desc *d = irq_to_desc(irq);
|
||||
|
||||
if (!d) {
|
||||
pr_err("HTCPLD invalid IRQ: %d\n", irq);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (flags & ~IRQ_TYPE_SENSE_MASK)
|
||||
return -EINVAL;
|
||||
|
||||
/* We only allow edge triggering */
|
||||
if (flags & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))
|
||||
return -EINVAL;
|
||||
|
||||
d->status &= ~IRQ_TYPE_SENSE_MASK;
|
||||
d->status |= flags;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct irq_chip htcpld_muxed_chip = {
|
||||
.name = "htcpld",
|
||||
.mask = htcpld_mask,
|
||||
.unmask = htcpld_unmask,
|
||||
.set_type = htcpld_set_type,
|
||||
};
|
||||
|
||||
/* To properly dispatch IRQ events, we need to read from the
|
||||
* chip. This is an I2C action that could possibly sleep
|
||||
* (which is bad in interrupt context) -- so we use a threaded
|
||||
* interrupt handler to get around that.
|
||||
*/
|
||||
static irqreturn_t htcpld_handler(int irq, void *dev)
|
||||
{
|
||||
struct htcpld_data *htcpld = dev;
|
||||
unsigned int i;
|
||||
unsigned long flags;
|
||||
int irqpin;
|
||||
struct irq_desc *desc;
|
||||
|
||||
if (!htcpld) {
|
||||
pr_debug("htcpld is null in ISR\n");
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
/*
|
||||
* For each chip, do a read of the chip and trigger any interrupts
|
||||
* desired. The interrupts will be triggered from LSB to MSB (i.e.
|
||||
* bit 0 first, then bit 1, etc.)
|
||||
*
|
||||
* For chips that have no interrupt range specified, just skip 'em.
|
||||
*/
|
||||
for (i = 0; i < htcpld->nchips; i++) {
|
||||
struct htcpld_chip *chip = &htcpld->chip[i];
|
||||
struct i2c_client *client;
|
||||
int val;
|
||||
unsigned long uval, old_val;
|
||||
|
||||
if (!chip) {
|
||||
pr_debug("chip %d is null in ISR\n", i);
|
||||
continue;
|
||||
}
|
||||
|
||||
if (chip->nirqs == 0)
|
||||
continue;
|
||||
|
||||
client = chip->client;
|
||||
if (!client) {
|
||||
pr_debug("client %d is null in ISR\n", i);
|
||||
continue;
|
||||
}
|
||||
|
||||
/* Scan the chip */
|
||||
val = i2c_smbus_read_byte_data(client, chip->cache_out);
|
||||
if (val < 0) {
|
||||
/* Throw a warning and skip this chip */
|
||||
dev_warn(chip->dev, "Unable to read from chip: %d\n",
|
||||
val);
|
||||
continue;
|
||||
}
|
||||
|
||||
uval = (unsigned long)val;
|
||||
|
||||
spin_lock_irqsave(&chip->lock, flags);
|
||||
|
||||
/* Save away the old value so we can compare it */
|
||||
old_val = chip->cache_in;
|
||||
|
||||
/* Write the new value */
|
||||
chip->cache_in = uval;
|
||||
|
||||
spin_unlock_irqrestore(&chip->lock, flags);
|
||||
|
||||
/*
|
||||
* For each bit in the data (starting at bit 0), trigger
|
||||
* associated interrupts.
|
||||
*/
|
||||
for (irqpin = 0; irqpin < chip->nirqs; irqpin++) {
|
||||
unsigned oldb, newb;
|
||||
int flags;
|
||||
|
||||
irq = chip->irq_start + irqpin;
|
||||
desc = irq_to_desc(irq);
|
||||
flags = desc->status;
|
||||
|
||||
/* Run the IRQ handler, but only if the bit value
|
||||
* changed, and the proper flags are set */
|
||||
oldb = (old_val >> irqpin) & 1;
|
||||
newb = (uval >> irqpin) & 1;
|
||||
|
||||
if ((!oldb && newb && (flags & IRQ_TYPE_EDGE_RISING)) ||
|
||||
(oldb && !newb &&
|
||||
(flags & IRQ_TYPE_EDGE_FALLING))) {
|
||||
pr_debug("fire IRQ %d\n", irqpin);
|
||||
desc->handle_irq(irq, desc);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* In order to continue receiving interrupts, the int_reset_gpio must
|
||||
* be asserted.
|
||||
*/
|
||||
if (htcpld->int_reset_gpio_hi)
|
||||
gpio_set_value(htcpld->int_reset_gpio_hi, 1);
|
||||
if (htcpld->int_reset_gpio_lo)
|
||||
gpio_set_value(htcpld->int_reset_gpio_lo, 0);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
/*
|
||||
* The GPIO set routines can be called from interrupt context, especially if,
|
||||
* for example they're attached to the led-gpio framework and a trigger is
|
||||
* enabled. As such, we declared work above in the htcpld_chip structure,
|
||||
* and that work is scheduled in the set routine. The kernel can then run
|
||||
* the I2C functions, which will sleep, in process context.
|
||||
*/
|
||||
void htcpld_chip_set(struct gpio_chip *chip, unsigned offset, int val)
|
||||
{
|
||||
struct i2c_client *client;
|
||||
struct htcpld_chip *chip_data;
|
||||
unsigned long flags;
|
||||
|
||||
chip_data = container_of(chip, struct htcpld_chip, chip_out);
|
||||
if (!chip_data)
|
||||
return;
|
||||
|
||||
client = chip_data->client;
|
||||
if (client == NULL)
|
||||
return;
|
||||
|
||||
spin_lock_irqsave(&chip_data->lock, flags);
|
||||
if (val)
|
||||
chip_data->cache_out |= (1 << offset);
|
||||
else
|
||||
chip_data->cache_out &= ~(1 << offset);
|
||||
spin_unlock_irqrestore(&chip_data->lock, flags);
|
||||
|
||||
schedule_work(&(chip_data->set_val_work));
|
||||
}
|
||||
|
||||
void htcpld_chip_set_ni(struct work_struct *work)
|
||||
{
|
||||
struct htcpld_chip *chip_data;
|
||||
struct i2c_client *client;
|
||||
|
||||
chip_data = container_of(work, struct htcpld_chip, set_val_work);
|
||||
client = chip_data->client;
|
||||
i2c_smbus_read_byte_data(client, chip_data->cache_out);
|
||||
}
|
||||
|
||||
int htcpld_chip_get(struct gpio_chip *chip, unsigned offset)
|
||||
{
|
||||
struct htcpld_chip *chip_data;
|
||||
int val = 0;
|
||||
int is_input = 0;
|
||||
|
||||
/* Try out first */
|
||||
chip_data = container_of(chip, struct htcpld_chip, chip_out);
|
||||
if (!chip_data) {
|
||||
/* Try in */
|
||||
is_input = 1;
|
||||
chip_data = container_of(chip, struct htcpld_chip, chip_in);
|
||||
if (!chip_data)
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* Determine if this is an input or output GPIO */
|
||||
if (!is_input)
|
||||
/* Use the output cache */
|
||||
val = (chip_data->cache_out >> offset) & 1;
|
||||
else
|
||||
/* Use the input cache */
|
||||
val = (chip_data->cache_in >> offset) & 1;
|
||||
|
||||
if (val)
|
||||
return 1;
|
||||
else
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int htcpld_direction_output(struct gpio_chip *chip,
|
||||
unsigned offset, int value)
|
||||
{
|
||||
htcpld_chip_set(chip, offset, value);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int htcpld_direction_input(struct gpio_chip *chip,
|
||||
unsigned offset)
|
||||
{
|
||||
/*
|
||||
* No-op: this function can only be called on the input chip.
|
||||
* We do however make sure the offset is within range.
|
||||
*/
|
||||
return (offset < chip->ngpio) ? 0 : -EINVAL;
|
||||
}
|
||||
|
||||
int htcpld_chip_to_irq(struct gpio_chip *chip, unsigned offset)
|
||||
{
|
||||
struct htcpld_chip *chip_data;
|
||||
|
||||
chip_data = container_of(chip, struct htcpld_chip, chip_in);
|
||||
|
||||
if (offset < chip_data->nirqs)
|
||||
return chip_data->irq_start + offset;
|
||||
else
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
void htcpld_chip_reset(struct i2c_client *client)
|
||||
{
|
||||
struct htcpld_chip *chip_data = i2c_get_clientdata(client);
|
||||
if (!chip_data)
|
||||
return;
|
||||
|
||||
i2c_smbus_read_byte_data(
|
||||
client, (chip_data->cache_out = chip_data->reset));
|
||||
}
|
||||
|
||||
static int __devinit htcpld_setup_chip_irq(
|
||||
struct platform_device *pdev,
|
||||
int chip_index)
|
||||
{
|
||||
struct htcpld_data *htcpld;
|
||||
struct device *dev = &pdev->dev;
|
||||
struct htcpld_core_platform_data *pdata;
|
||||
struct htcpld_chip *chip;
|
||||
struct htcpld_chip_platform_data *plat_chip_data;
|
||||
unsigned int irq, irq_end;
|
||||
int ret = 0;
|
||||
|
||||
/* Get the platform and driver data */
|
||||
pdata = dev->platform_data;
|
||||
htcpld = platform_get_drvdata(pdev);
|
||||
chip = &htcpld->chip[chip_index];
|
||||
plat_chip_data = &pdata->chip[chip_index];
|
||||
|
||||
/* Setup irq handlers */
|
||||
irq_end = chip->irq_start + chip->nirqs;
|
||||
for (irq = chip->irq_start; irq < irq_end; irq++) {
|
||||
set_irq_chip(irq, &htcpld_muxed_chip);
|
||||
set_irq_chip_data(irq, chip);
|
||||
set_irq_handler(irq, handle_simple_irq);
|
||||
#ifdef CONFIG_ARM
|
||||
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
|
||||
#else
|
||||
set_irq_probe(irq);
|
||||
#endif
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int __devinit htcpld_register_chip_i2c(
|
||||
struct platform_device *pdev,
|
||||
int chip_index)
|
||||
{
|
||||
struct htcpld_data *htcpld;
|
||||
struct device *dev = &pdev->dev;
|
||||
struct htcpld_core_platform_data *pdata;
|
||||
struct htcpld_chip *chip;
|
||||
struct htcpld_chip_platform_data *plat_chip_data;
|
||||
struct i2c_adapter *adapter;
|
||||
struct i2c_client *client;
|
||||
struct i2c_board_info info;
|
||||
|
||||
/* Get the platform and driver data */
|
||||
pdata = dev->platform_data;
|
||||
htcpld = platform_get_drvdata(pdev);
|
||||
chip = &htcpld->chip[chip_index];
|
||||
plat_chip_data = &pdata->chip[chip_index];
|
||||
|
||||
adapter = i2c_get_adapter(pdata->i2c_adapter_id);
|
||||
if (adapter == NULL) {
|
||||
/* Eek, no such I2C adapter! Bail out. */
|
||||
dev_warn(dev, "Chip at i2c address 0x%x: Invalid i2c adapter %d\n",
|
||||
plat_chip_data->addr, pdata->i2c_adapter_id);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
|
||||
dev_warn(dev, "i2c adapter %d non-functional\n",
|
||||
pdata->i2c_adapter_id);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
memset(&info, 0, sizeof(struct i2c_board_info));
|
||||
info.addr = plat_chip_data->addr;
|
||||
strlcpy(info.type, "htcpld-chip", I2C_NAME_SIZE);
|
||||
info.platform_data = chip;
|
||||
|
||||
/* Add the I2C device. This calls the probe() function. */
|
||||
client = i2c_new_device(adapter, &info);
|
||||
if (!client) {
|
||||
/* I2C device registration failed, contineu with the next */
|
||||
dev_warn(dev, "Unable to add I2C device for 0x%x\n",
|
||||
plat_chip_data->addr);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
i2c_set_clientdata(client, chip);
|
||||
snprintf(client->name, I2C_NAME_SIZE, "Chip_0x%d", client->addr);
|
||||
chip->client = client;
|
||||
|
||||
/* Reset the chip */
|
||||
htcpld_chip_reset(client);
|
||||
chip->cache_in = i2c_smbus_read_byte_data(client, chip->cache_out);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void __devinit htcpld_unregister_chip_i2c(
|
||||
struct platform_device *pdev,
|
||||
int chip_index)
|
||||
{
|
||||
struct htcpld_data *htcpld;
|
||||
struct htcpld_chip *chip;
|
||||
|
||||
/* Get the platform and driver data */
|
||||
htcpld = platform_get_drvdata(pdev);
|
||||
chip = &htcpld->chip[chip_index];
|
||||
|
||||
if (chip->client)
|
||||
i2c_unregister_device(chip->client);
|
||||
}
|
||||
|
||||
static int __devinit htcpld_register_chip_gpio(
|
||||
struct platform_device *pdev,
|
||||
int chip_index)
|
||||
{
|
||||
struct htcpld_data *htcpld;
|
||||
struct device *dev = &pdev->dev;
|
||||
struct htcpld_core_platform_data *pdata;
|
||||
struct htcpld_chip *chip;
|
||||
struct htcpld_chip_platform_data *plat_chip_data;
|
||||
struct gpio_chip *gpio_chip;
|
||||
int ret = 0;
|
||||
|
||||
/* Get the platform and driver data */
|
||||
pdata = dev->platform_data;
|
||||
htcpld = platform_get_drvdata(pdev);
|
||||
chip = &htcpld->chip[chip_index];
|
||||
plat_chip_data = &pdata->chip[chip_index];
|
||||
|
||||
/* Setup the GPIO chips */
|
||||
gpio_chip = &(chip->chip_out);
|
||||
gpio_chip->label = "htcpld-out";
|
||||
gpio_chip->dev = dev;
|
||||
gpio_chip->owner = THIS_MODULE;
|
||||
gpio_chip->get = htcpld_chip_get;
|
||||
gpio_chip->set = htcpld_chip_set;
|
||||
gpio_chip->direction_input = NULL;
|
||||
gpio_chip->direction_output = htcpld_direction_output;
|
||||
gpio_chip->base = plat_chip_data->gpio_out_base;
|
||||
gpio_chip->ngpio = plat_chip_data->num_gpios;
|
||||
|
||||
gpio_chip = &(chip->chip_in);
|
||||
gpio_chip->label = "htcpld-in";
|
||||
gpio_chip->dev = dev;
|
||||
gpio_chip->owner = THIS_MODULE;
|
||||
gpio_chip->get = htcpld_chip_get;
|
||||
gpio_chip->set = NULL;
|
||||
gpio_chip->direction_input = htcpld_direction_input;
|
||||
gpio_chip->direction_output = NULL;
|
||||
gpio_chip->to_irq = htcpld_chip_to_irq;
|
||||
gpio_chip->base = plat_chip_data->gpio_in_base;
|
||||
gpio_chip->ngpio = plat_chip_data->num_gpios;
|
||||
|
||||
/* Add the GPIO chips */
|
||||
ret = gpiochip_add(&(chip->chip_out));
|
||||
if (ret) {
|
||||
dev_warn(dev, "Unable to register output GPIOs for 0x%x: %d\n",
|
||||
plat_chip_data->addr, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = gpiochip_add(&(chip->chip_in));
|
||||
if (ret) {
|
||||
int error;
|
||||
|
||||
dev_warn(dev, "Unable to register input GPIOs for 0x%x: %d\n",
|
||||
plat_chip_data->addr, ret);
|
||||
|
||||
error = gpiochip_remove(&(chip->chip_out));
|
||||
if (error)
|
||||
dev_warn(dev, "Error while trying to unregister gpio chip: %d\n", error);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __devinit htcpld_setup_chips(struct platform_device *pdev)
|
||||
{
|
||||
struct htcpld_data *htcpld;
|
||||
struct device *dev = &pdev->dev;
|
||||
struct htcpld_core_platform_data *pdata;
|
||||
int i;
|
||||
|
||||
/* Get the platform and driver data */
|
||||
pdata = dev->platform_data;
|
||||
htcpld = platform_get_drvdata(pdev);
|
||||
|
||||
/* Setup each chip's output GPIOs */
|
||||
htcpld->nchips = pdata->num_chip;
|
||||
htcpld->chip = kzalloc(sizeof(struct htcpld_chip) * htcpld->nchips,
|
||||
GFP_KERNEL);
|
||||
if (!htcpld->chip) {
|
||||
dev_warn(dev, "Unable to allocate memory for chips\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
/* Add the chips as best we can */
|
||||
for (i = 0; i < htcpld->nchips; i++) {
|
||||
int ret;
|
||||
|
||||
/* Setup the HTCPLD chips */
|
||||
htcpld->chip[i].reset = pdata->chip[i].reset;
|
||||
htcpld->chip[i].cache_out = pdata->chip[i].reset;
|
||||
htcpld->chip[i].cache_in = 0;
|
||||
htcpld->chip[i].dev = dev;
|
||||
htcpld->chip[i].irq_start = pdata->chip[i].irq_base;
|
||||
htcpld->chip[i].nirqs = pdata->chip[i].num_irqs;
|
||||
|
||||
INIT_WORK(&(htcpld->chip[i].set_val_work), &htcpld_chip_set_ni);
|
||||
spin_lock_init(&(htcpld->chip[i].lock));
|
||||
|
||||
/* Setup the interrupts for the chip */
|
||||
if (htcpld->chained_irq) {
|
||||
ret = htcpld_setup_chip_irq(pdev, i);
|
||||
if (ret)
|
||||
continue;
|
||||
}
|
||||
|
||||
/* Register the chip with I2C */
|
||||
ret = htcpld_register_chip_i2c(pdev, i);
|
||||
if (ret)
|
||||
continue;
|
||||
|
||||
|
||||
/* Register the chips with the GPIO subsystem */
|
||||
ret = htcpld_register_chip_gpio(pdev, i);
|
||||
if (ret) {
|
||||
/* Unregister the chip from i2c and continue */
|
||||
htcpld_unregister_chip_i2c(pdev, i);
|
||||
continue;
|
||||
}
|
||||
|
||||
dev_info(dev, "Registered chip at 0x%x\n", pdata->chip[i].addr);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __devinit htcpld_core_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct htcpld_data *htcpld;
|
||||
struct device *dev = &pdev->dev;
|
||||
struct htcpld_core_platform_data *pdata;
|
||||
struct resource *res;
|
||||
int ret = 0;
|
||||
|
||||
if (!dev)
|
||||
return -ENODEV;
|
||||
|
||||
pdata = dev->platform_data;
|
||||
if (!pdata) {
|
||||
dev_warn(dev, "Platform data not found for htcpld core!\n");
|
||||
return -ENXIO;
|
||||
}
|
||||
|
||||
htcpld = kzalloc(sizeof(struct htcpld_data), GFP_KERNEL);
|
||||
if (!htcpld)
|
||||
return -ENOMEM;
|
||||
|
||||
/* Find chained irq */
|
||||
ret = -EINVAL;
|
||||
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
||||
if (res) {
|
||||
int flags;
|
||||
htcpld->chained_irq = res->start;
|
||||
|
||||
/* Setup the chained interrupt handler */
|
||||
flags = IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING;
|
||||
ret = request_threaded_irq(htcpld->chained_irq,
|
||||
NULL, htcpld_handler,
|
||||
flags, pdev->name, htcpld);
|
||||
if (ret) {
|
||||
dev_warn(dev, "Unable to setup chained irq handler: %d\n", ret);
|
||||
goto fail;
|
||||
} else
|
||||
device_init_wakeup(dev, 0);
|
||||
}
|
||||
|
||||
/* Set the driver data */
|
||||
platform_set_drvdata(pdev, htcpld);
|
||||
|
||||
/* Setup the htcpld chips */
|
||||
ret = htcpld_setup_chips(pdev);
|
||||
if (ret)
|
||||
goto fail;
|
||||
|
||||
/* Request the GPIO(s) for the int reset and set them up */
|
||||
if (pdata->int_reset_gpio_hi) {
|
||||
ret = gpio_request(pdata->int_reset_gpio_hi, "htcpld-core");
|
||||
if (ret) {
|
||||
/*
|
||||
* If it failed, that sucks, but we can probably
|
||||
* continue on without it.
|
||||
*/
|
||||
dev_warn(dev, "Unable to request int_reset_gpio_hi -- interrupts may not work\n");
|
||||
htcpld->int_reset_gpio_hi = 0;
|
||||
} else {
|
||||
htcpld->int_reset_gpio_hi = pdata->int_reset_gpio_hi;
|
||||
gpio_set_value(htcpld->int_reset_gpio_hi, 1);
|
||||
}
|
||||
}
|
||||
|
||||
if (pdata->int_reset_gpio_lo) {
|
||||
ret = gpio_request(pdata->int_reset_gpio_lo, "htcpld-core");
|
||||
if (ret) {
|
||||
/*
|
||||
* If it failed, that sucks, but we can probably
|
||||
* continue on without it.
|
||||
*/
|
||||
dev_warn(dev, "Unable to request int_reset_gpio_lo -- interrupts may not work\n");
|
||||
htcpld->int_reset_gpio_lo = 0;
|
||||
} else {
|
||||
htcpld->int_reset_gpio_lo = pdata->int_reset_gpio_lo;
|
||||
gpio_set_value(htcpld->int_reset_gpio_lo, 0);
|
||||
}
|
||||
}
|
||||
|
||||
dev_info(dev, "Initialized successfully\n");
|
||||
return 0;
|
||||
|
||||
fail:
|
||||
kfree(htcpld);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* The I2C Driver -- used internally */
|
||||
static const struct i2c_device_id htcpld_chip_id[] = {
|
||||
{ "htcpld-chip", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, htcpld_chip_id);
|
||||
|
||||
|
||||
static struct i2c_driver htcpld_chip_driver = {
|
||||
.driver = {
|
||||
.name = "htcpld-chip",
|
||||
},
|
||||
.id_table = htcpld_chip_id,
|
||||
};
|
||||
|
||||
/* The Core Driver */
|
||||
static struct platform_driver htcpld_core_driver = {
|
||||
.driver = {
|
||||
.name = "i2c-htcpld",
|
||||
},
|
||||
};
|
||||
|
||||
static int __init htcpld_core_init(void)
|
||||
{
|
||||
int ret;
|
||||
|
||||
/* Register the I2C Chip driver */
|
||||
ret = i2c_add_driver(&htcpld_chip_driver);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/* Probe for our chips */
|
||||
return platform_driver_probe(&htcpld_core_driver, htcpld_core_probe);
|
||||
}
|
||||
|
||||
static void __exit htcpld_core_exit(void)
|
||||
{
|
||||
i2c_del_driver(&htcpld_chip_driver);
|
||||
platform_driver_unregister(&htcpld_core_driver);
|
||||
}
|
||||
|
||||
module_init(htcpld_core_init);
|
||||
module_exit(htcpld_core_exit);
|
||||
|
||||
MODULE_AUTHOR("Cory Maccarrone <darkstar6262@gmail.com>");
|
||||
MODULE_DESCRIPTION("I2C HTC PLD Driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
|
|
@ -0,0 +1,24 @@
|
|||
#ifndef __LINUX_HTCPLD_H
|
||||
#define __LINUX_HTCPLD_H
|
||||
|
||||
struct htcpld_chip_platform_data {
|
||||
unsigned int addr;
|
||||
unsigned int reset;
|
||||
unsigned int num_gpios;
|
||||
unsigned int gpio_out_base;
|
||||
unsigned int gpio_in_base;
|
||||
unsigned int irq_base;
|
||||
unsigned int num_irqs;
|
||||
};
|
||||
|
||||
struct htcpld_core_platform_data {
|
||||
unsigned int int_reset_gpio_hi;
|
||||
unsigned int int_reset_gpio_lo;
|
||||
unsigned int i2c_adapter_id;
|
||||
|
||||
struct htcpld_chip_platform_data *chip;
|
||||
unsigned int num_chip;
|
||||
};
|
||||
|
||||
#endif /* __LINUX_HTCPLD_H */
|
||||
|
||||
Reference in New Issue