CRIS v10: drivers/net/cris/eth_v10.c rename LED defines to CRIS_LED to avoid name clash.
This commit is contained in:
Jesper Nilsson
parent
a63461e9ea
commit
5efa1d1c94
|
|
@ -1,221 +1,10 @@
|
|||
/* $Id: ethernet.c,v 1.31 2004/10/18 14:49:03 starvik Exp $
|
||||
*
|
||||
/*
|
||||
* e100net.c: A network driver for the ETRAX 100LX network controller.
|
||||
*
|
||||
* Copyright (c) 1998-2002 Axis Communications AB.
|
||||
*
|
||||
* The outline of this driver comes from skeleton.c.
|
||||
*
|
||||
* $Log: ethernet.c,v $
|
||||
* Revision 1.31 2004/10/18 14:49:03 starvik
|
||||
* Use RX interrupt as random source
|
||||
*
|
||||
* Revision 1.30 2004/09/29 10:44:04 starvik
|
||||
* Enabed MAC-address output again
|
||||
*
|
||||
* Revision 1.29 2004/08/24 07:14:05 starvik
|
||||
* Make use of generic MDIO interface and constants.
|
||||
*
|
||||
* Revision 1.28 2004/08/20 09:37:11 starvik
|
||||
* Added support for Intel LXT972A. Creds to Randy Scarborough.
|
||||
*
|
||||
* Revision 1.27 2004/08/16 12:37:22 starvik
|
||||
* Merge of Linux 2.6.8
|
||||
*
|
||||
* Revision 1.25 2004/06/21 10:29:57 starvik
|
||||
* Merge of Linux 2.6.7
|
||||
*
|
||||
* Revision 1.23 2004/06/09 05:29:22 starvik
|
||||
* Avoid any race where R_DMA_CH1_FIRST is NULL (may trigger cache bug).
|
||||
*
|
||||
* Revision 1.22 2004/05/14 07:58:03 starvik
|
||||
* Merge of changes from 2.4
|
||||
*
|
||||
* Revision 1.20 2004/03/11 11:38:40 starvik
|
||||
* Merge of Linux 2.6.4
|
||||
*
|
||||
* Revision 1.18 2003/12/03 13:45:46 starvik
|
||||
* Use hardware pad for short packets to prevent information leakage.
|
||||
*
|
||||
* Revision 1.17 2003/07/04 08:27:37 starvik
|
||||
* Merge of Linux 2.5.74
|
||||
*
|
||||
* Revision 1.16 2003/04/24 08:28:22 starvik
|
||||
* New LED behaviour: LED off when no link
|
||||
*
|
||||
* Revision 1.15 2003/04/09 05:20:47 starvik
|
||||
* Merge of Linux 2.5.67
|
||||
*
|
||||
* Revision 1.13 2003/03/06 16:11:01 henriken
|
||||
* Off by one error in group address register setting.
|
||||
*
|
||||
* Revision 1.12 2003/02/27 17:24:19 starvik
|
||||
* Corrected Rev to Revision
|
||||
*
|
||||
* Revision 1.11 2003/01/24 09:53:21 starvik
|
||||
* Oops. Initialize GA to 0, not to 1
|
||||
*
|
||||
* Revision 1.10 2003/01/24 09:50:55 starvik
|
||||
* Initialize GA_0 and GA_1 to 0 to avoid matching of unwanted packets
|
||||
*
|
||||
* Revision 1.9 2002/12/13 07:40:58 starvik
|
||||
* Added basic ethtool interface
|
||||
* Handled out of memory when allocating new buffers
|
||||
*
|
||||
* Revision 1.8 2002/12/11 13:13:57 starvik
|
||||
* Added arch/ to v10 specific includes
|
||||
* Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer)
|
||||
*
|
||||
* Revision 1.7 2002/11/26 09:41:42 starvik
|
||||
* Added e100_set_config (standard interface to set media type)
|
||||
* Added protection against preemptive scheduling
|
||||
* Added standard MII ioctls
|
||||
*
|
||||
* Revision 1.6 2002/11/21 07:18:18 starvik
|
||||
* Timers must be initialized in 2.5.48
|
||||
*
|
||||
* Revision 1.5 2002/11/20 11:56:11 starvik
|
||||
* Merge of Linux 2.5.48
|
||||
*
|
||||
* Revision 1.4 2002/11/18 07:26:46 starvik
|
||||
* Linux 2.5 port of latest Linux 2.4 ethernet driver
|
||||
*
|
||||
* Revision 1.33 2002/10/02 20:16:17 hp
|
||||
* SETF, SETS: Use underscored IO_x_ macros rather than incorrect token concatenation
|
||||
*
|
||||
* Revision 1.32 2002/09/16 06:05:58 starvik
|
||||
* Align memory returned by dev_alloc_skb
|
||||
* Moved handling of sent packets to interrupt to avoid reference counting problem
|
||||
*
|
||||
* Revision 1.31 2002/09/10 13:28:23 larsv
|
||||
* Return -EINVAL for unknown ioctls to avoid confusing tools that tests
|
||||
* for supported functionality by issuing special ioctls, i.e. wireless
|
||||
* extensions.
|
||||
*
|
||||
* Revision 1.30 2002/05/07 18:50:08 johana
|
||||
* Correct spelling in comments.
|
||||
*
|
||||
* Revision 1.29 2002/05/06 05:38:49 starvik
|
||||
* Performance improvements:
|
||||
* Large packets are not copied (breakpoint set to 256 bytes)
|
||||
* The cache bug workaround is delayed until half of the receive list
|
||||
* has been used
|
||||
* Added transmit list
|
||||
* Transmit interrupts are only enabled when transmit queue is full
|
||||
*
|
||||
* Revision 1.28.2.1 2002/04/30 08:15:51 starvik
|
||||
* Performance improvements:
|
||||
* Large packets are not copied (breakpoint set to 256 bytes)
|
||||
* The cache bug workaround is delayed until half of the receive list
|
||||
* has been used.
|
||||
* Added transmit list
|
||||
* Transmit interrupts are only enabled when transmit queue is full
|
||||
*
|
||||
* Revision 1.28 2002/04/22 11:47:21 johana
|
||||
* Fix according to 2.4.19-pre7. time_after/time_before and
|
||||
* missing end of comment.
|
||||
* The patch has a typo for ethernet.c in e100_clear_network_leds(),
|
||||
* that is fixed here.
|
||||
*
|
||||
* Revision 1.27 2002/04/12 11:55:11 bjornw
|
||||
* Added TODO
|
||||
*
|
||||
* Revision 1.26 2002/03/15 17:11:02 bjornw
|
||||
* Use prepare_rx_descriptor after the CPU has touched the receiving descs
|
||||
*
|
||||
* Revision 1.25 2002/03/08 13:07:53 bjornw
|
||||
* Unnecessary spinlock removed
|
||||
*
|
||||
* Revision 1.24 2002/02/20 12:57:43 fredriks
|
||||
* Replaced MIN() with min().
|
||||
*
|
||||
* Revision 1.23 2002/02/20 10:58:14 fredriks
|
||||
* Strip the Ethernet checksum (4 bytes) before forwarding a frame to upper layers.
|
||||
*
|
||||
* Revision 1.22 2002/01/30 07:48:22 matsfg
|
||||
* Initiate R_NETWORK_TR_CTRL
|
||||
*
|
||||
* Revision 1.21 2001/11/23 11:54:49 starvik
|
||||
* Added IFF_PROMISC and IFF_ALLMULTI handling in set_multicast_list
|
||||
* Removed compiler warnings
|
||||
*
|
||||
* Revision 1.20 2001/11/12 19:26:00 pkj
|
||||
* * Corrected e100_negotiate() to not assign half to current_duplex when
|
||||
* it was supposed to compare them...
|
||||
* * Cleaned up failure handling in e100_open().
|
||||
* * Fixed compiler warnings.
|
||||
*
|
||||
* Revision 1.19 2001/11/09 07:43:09 starvik
|
||||
* Added full duplex support
|
||||
* Added ioctl to set speed and duplex
|
||||
* Clear LED timer only runs when LED is lit
|
||||
*
|
||||
* Revision 1.18 2001/10/03 14:40:43 jonashg
|
||||
* Update rx_bytes counter.
|
||||
*
|
||||
* Revision 1.17 2001/06/11 12:43:46 olof
|
||||
* Modified defines for network LED behavior
|
||||
*
|
||||
* Revision 1.16 2001/05/30 06:12:46 markusl
|
||||
* TxDesc.next should not be set to NULL
|
||||
*
|
||||
* Revision 1.15 2001/05/29 10:27:04 markusl
|
||||
* Updated after review remarks:
|
||||
* +Use IO_EXTRACT
|
||||
* +Handle underrun
|
||||
*
|
||||
* Revision 1.14 2001/05/29 09:20:14 jonashg
|
||||
* Use driver name on printk output so one can tell which driver that complains.
|
||||
*
|
||||
* Revision 1.13 2001/05/09 12:35:59 johana
|
||||
* Use DMA_NBR and IRQ_NBR defines from dma.h and irq.h
|
||||
*
|
||||
* Revision 1.12 2001/04/05 11:43:11 tobiasa
|
||||
* Check dev before panic.
|
||||
*
|
||||
* Revision 1.11 2001/04/04 11:21:05 markusl
|
||||
* Updated according to review remarks
|
||||
*
|
||||
* Revision 1.10 2001/03/26 16:03:06 bjornw
|
||||
* Needs linux/config.h
|
||||
*
|
||||
* Revision 1.9 2001/03/19 14:47:48 pkj
|
||||
* * Make sure there is always a pause after the network LEDs are
|
||||
* changed so they will not look constantly lit during heavy traffic.
|
||||
* * Always use HZ when setting times relative to jiffies.
|
||||
* * Use LED_NETWORK_SET() when setting the network LEDs.
|
||||
*
|
||||
* Revision 1.8 2001/02/27 13:52:48 bjornw
|
||||
* malloc.h -> slab.h
|
||||
*
|
||||
* Revision 1.7 2001/02/23 13:46:38 bjornw
|
||||
* Spellling check
|
||||
*
|
||||
* Revision 1.6 2001/01/26 15:21:04 starvik
|
||||
* Don't disable interrupts while reading MDIO registers (MDIO is slow)
|
||||
* Corrected promiscuous mode
|
||||
* Improved deallocation of IRQs ("ifconfig eth0 down" now works)
|
||||
*
|
||||
* Revision 1.5 2000/11/29 17:22:22 bjornw
|
||||
* Get rid of the udword types legacy stuff
|
||||
*
|
||||
* Revision 1.4 2000/11/22 16:36:09 bjornw
|
||||
* Please marketing by using the correct case when spelling Etrax.
|
||||
*
|
||||
* Revision 1.3 2000/11/21 16:43:04 bjornw
|
||||
* Minor short->int change
|
||||
*
|
||||
* Revision 1.2 2000/11/08 14:27:57 bjornw
|
||||
* 2.4 port
|
||||
*
|
||||
* Revision 1.1 2000/11/06 13:56:00 bjornw
|
||||
* Verbatim copy of the 1.24 version of e100net.c from elinux
|
||||
*
|
||||
* Revision 1.24 2000/10/04 15:55:23 bjornw
|
||||
* * Use virt_to_phys etc. for DMA addresses
|
||||
* * Removed bogus CHECKSUM_UNNECESSARY
|
||||
*
|
||||
*
|
||||
*/
|
||||
|
||||
|
||||
|
|
@ -244,7 +33,7 @@
|
|||
#include <linux/ethtool.h>
|
||||
|
||||
#include <asm/arch/svinto.h>/* DMA and register descriptions */
|
||||
#include <asm/io.h> /* LED_* I/O functions */
|
||||
#include <asm/io.h> /* CRIS_LED_* I/O functions */
|
||||
#include <asm/irq.h>
|
||||
#include <asm/dma.h>
|
||||
#include <asm/system.h>
|
||||
|
|
@ -1899,18 +1688,18 @@ e100_set_network_leds(int active)
|
|||
if (!current_speed) {
|
||||
/* Make LED red, link is down */
|
||||
#if defined(CONFIG_ETRAX_NETWORK_RED_ON_NO_CONNECTION)
|
||||
LED_NETWORK_SET(LED_RED);
|
||||
CRIS_LED_NETWORK_SET(CRIS_LED_RED);
|
||||
#else
|
||||
LED_NETWORK_SET(LED_OFF);
|
||||
CRIS_LED_NETWORK_SET(CRIS_LED_OFF);
|
||||
#endif
|
||||
} else if (light_leds) {
|
||||
if (current_speed == 10) {
|
||||
LED_NETWORK_SET(LED_ORANGE);
|
||||
CRIS_LED_NETWORK_SET(CRIS_LED_ORANGE);
|
||||
} else {
|
||||
LED_NETWORK_SET(LED_GREEN);
|
||||
CRIS_LED_NETWORK_SET(CRIS_LED_GREEN);
|
||||
}
|
||||
} else {
|
||||
LED_NETWORK_SET(LED_OFF);
|
||||
CRIS_LED_NETWORK_SET(CRIS_LED_OFF);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
|
|||
Reference in New Issue