diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index 772a2907991..b56e4782f31 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -73,6 +73,13 @@ config EDAC_E752X Support for error detection and correction on the Intel E7520, E7525, E7320 server chipsets. +config EDAC_I82443BXGX + tristate "Intel 82443BX/GX (440BX/GX)" + depends on EDAC_MM_EDAC && PCI && X86_32 + help + Support for error detection and correction on the Intel + 82443BX/GX memory controllers (440BX/GX chipsets). + config EDAC_I82875P tristate "Intel 82875p (D82875P, E7210)" depends on EDAC_MM_EDAC && PCI && X86_32 diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index d2674fbde86..773472cef76 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_EDAC_AMD76X) += amd76x_edac.o obj-$(CONFIG_EDAC_I5000) += i5000_edac.o obj-$(CONFIG_EDAC_E7XXX) += e7xxx_edac.o obj-$(CONFIG_EDAC_E752X) += e752x_edac.o +obj-$(CONFIG_EDAC_I82443BXGX) += i82443bxgx_edac.o obj-$(CONFIG_EDAC_I82875P) += i82875p_edac.o obj-$(CONFIG_EDAC_I82860) += i82860_edac.o obj-$(CONFIG_EDAC_R82600) += r82600_edac.o diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_edac.c new file mode 100644 index 00000000000..ecf2ba82989 --- /dev/null +++ b/drivers/edac/i82443bxgx_edac.c @@ -0,0 +1,400 @@ +/* + * Intel 82443BX/GX (440BX/GX chipset) Memory Controller EDAC kernel + * module (C) 2006 Tim Small + * + * This file may be distributed under the terms of the GNU General + * Public License. + * + * Written by Tim Small , based on work by Linux + * Networx, Thayne Harbaugh, Dan Hollis and + * others. + * + * 440GX fix by Jason Uhlenkott . + * + * Written with reference to 82443BX Host Bridge Datasheet: + * http://www.intel.com/design/chipsets/440/documentation.htm + * references to this document given in []. + * + * This module doesn't support the 440LX, but it may be possible to + * make it do so (the 440LX's register definitions are different, but + * not completely so - I haven't studied them in enough detail to know + * how easy this would be). + */ + +#include +#include + +#include +#include + +#include + +#include "edac_mc.h" + +#define I82443_REVISION "0.1" + +#define EDAC_MOD_STR "i82443bxgx_edac" + + +/* The 82443BX supports SDRAM, or EDO (EDO for mobile only), "Memory + * Size: 8 MB to 512 MB (1GB with Registered DIMMs) with eight memory + * rows" "The 82443BX supports multiple-bit error detection and + * single-bit error correction when ECC mode is enabled and + * single/multi-bit error detection when correction is disabled. + * During writes to the DRAM, the 82443BX generates ECC for the data + * on a QWord basis. Partial QWord writes require a read-modify-write + * cycle when ECC is enabled." +*/ + +/* "Additionally, the 82443BX ensures that the data is corrected in + * main memory so that accumulation of errors is prevented. Another + * error within the same QWord would result in a double-bit error + * which is unrecoverable. This is known as hardware scrubbing since + * it requires no software intervention to correct the data in memory." + */ + +/* [Also see page 100 (section 4.3), "DRAM Interface"] + * [Also see page 112 (section 4.6.1.4), ECC] + */ + +#define I82443BXGX_NR_CSROWS 8 +#define I82443BXGX_NR_CHANS 1 +#define I82443BXGX_NR_DIMMS 4 + + + +/* 82443 PCI Device 0 */ +#define I82443BXGX_NBXCFG 0x50 /* 32bit register starting at this PCI + * config space offset */ +#define I82443BXGX_NBXCFG_OFFSET_NON_ECCROW 24 /* Array of bits, zero if + * row is non-ECC */ +#define I82443BXGX_NBXCFG_OFFSET_DRAM_FREQ 12 /* 2 bits,00=100MHz,10=66 MHz */ + +#define I82443BXGX_NBXCFG_OFFSET_DRAM_INTEGRITY 7 /* 2 bits: */ +#define I82443BXGX_NBXCFG_INTEGRITY_NONE 0x0 /* 00 = Non-ECC */ +#define I82443BXGX_NBXCFG_INTEGRITY_EC 0x1 /* 01 = EC (only) */ +#define I82443BXGX_NBXCFG_INTEGRITY_ECC 0x2 /* 10 = ECC */ +#define I82443BXGX_NBXCFG_INTEGRITY_SCRUB 0x3 /* 11 = ECC + HW Scrub */ + +#define I82443BXGX_NBXCFG_OFFSET_ECC_DIAG_ENABLE 6 + + +/* 82443 PCI Device 0 */ +#define I82443BXGX_EAP 0x80 /* 32bit register starting at this PCI + * config space offset, Error Address + * Pointer Register */ +#define I82443BXGX_EAP_OFFSET_EAP 12 /* High 20 bits of error address */ +#define I82443BXGX_EAP_OFFSET_MBE BIT(1) /* Err at EAP was multi-bit (W1TC) */ +#define I82443BXGX_EAP_OFFSET_SBE BIT(0) /* Err at EAP was single-bit (W1TC)*/ + +#define I82443BXGX_ERRCMD 0x90 /* 8bit register starting at this PCI + * config space offset. */ +#define I82443BXGX_ERRCMD_OFFSET_SERR_ON_MBE BIT(1) /* 1 = enable */ +#define I82443BXGX_ERRCMD_OFFSET_SERR_ON_SBE BIT(0) /* 1 = enable */ + +#define I82443BXGX_ERRSTS 0x91 /* 16bit register starting at this PCI + * config space offset. */ +#define I82443BXGX_ERRSTS_OFFSET_MBFRE 5 /* 3 bits - first err row multibit */ +#define I82443BXGX_ERRSTS_OFFSET_MEF BIT(4) /* 1 = MBE occurred */ +#define I82443BXGX_ERRSTS_OFFSET_SBFRE 1 /* 3 bits - first err row singlebit */ +#define I82443BXGX_ERRSTS_OFFSET_SEF BIT(0) /* 1 = SBE occurred */ + + +#define I82443BXGX_DRAMC 0x57 /* 8bit register starting at this PCI + * config space offset. */ +#define I82443BXGX_DRAMC_OFFSET_DT 3 /* 2 bits, DRAM Type */ +#define I82443BXGX_DRAMC_DRAM_IS_EDO 0 /* 00 = EDO */ +#define I82443BXGX_DRAMC_DRAM_IS_SDRAM 1 /* 01 = SDRAM */ +#define I82443BXGX_DRAMC_DRAM_IS_RSDRAM 2 /* 10 = Registered SDRAM */ + + +#define I82443BXGX_DRB 0x60 /* 8x 8bit registers starting at this PCI + * config space offset. */ + + +/* FIXME - don't poll when ECC disabled? */ + + +struct i82443bxgx_edacmc_error_info { + u32 eap; +}; + + +static void i82443bxgx_edacmc_get_error_info (struct mem_ctl_info *mci, + struct i82443bxgx_edacmc_error_info *info) +{ + struct pci_dev *pdev; + pdev = to_pci_dev(mci->dev); + pci_read_config_dword(pdev, I82443BXGX_EAP, &info->eap); + if (info->eap & I82443BXGX_EAP_OFFSET_SBE) + /* Clear error to allow next error to be reported [p.61] */ + pci_write_bits32(pdev, I82443BXGX_EAP, + I82443BXGX_EAP_OFFSET_SBE, + I82443BXGX_EAP_OFFSET_SBE); + + if (info->eap & I82443BXGX_EAP_OFFSET_MBE) + /* Clear error to allow next error to be reported [p.61] */ + pci_write_bits32(pdev, I82443BXGX_EAP, + I82443BXGX_EAP_OFFSET_MBE, + I82443BXGX_EAP_OFFSET_MBE); +} + + +static int i82443bxgx_edacmc_process_error_info (struct mem_ctl_info *mci, + struct i82443bxgx_edacmc_error_info *info, int handle_errors) +{ + int error_found = 0; + u32 eapaddr, page, pageoffset; + + /* bits 30:12 hold the 4kb block in which the error occurred + * [p.61] */ + eapaddr = (info->eap & 0xfffff000); + page = eapaddr >> PAGE_SHIFT; + pageoffset = eapaddr - (page << PAGE_SHIFT); + + if (info->eap & I82443BXGX_EAP_OFFSET_SBE) { + error_found = 1; + if (handle_errors) + edac_mc_handle_ce( + mci, page, pageoffset, + /* 440BX/GX don't make syndrome information available */ + 0, + edac_mc_find_csrow_by_page(mci, page), + 0, /* channel */ + mci->ctl_name); + } + + if (info->eap & I82443BXGX_EAP_OFFSET_MBE) { + error_found = 1; + if (handle_errors) + edac_mc_handle_ue( + mci, page, pageoffset, + edac_mc_find_csrow_by_page(mci, page), + mci->ctl_name); + } + + return error_found; +} + + +static void i82443bxgx_edacmc_check(struct mem_ctl_info *mci) +{ + struct i82443bxgx_edacmc_error_info info; + + debugf1("MC%d: " __FILE__ ": %s()\n", mci->mc_idx, __func__); + i82443bxgx_edacmc_get_error_info(mci, &info); + i82443bxgx_edacmc_process_error_info(mci, &info, 1); +} + + +static void i82443bxgx_init_csrows(struct mem_ctl_info *mci, + struct pci_dev *pdev, + enum edac_type edac_mode, + enum mem_type mtype) +{ + struct csrow_info *csrow; + int index; + u8 drbar, dramc; + u32 row_base, row_high_limit, row_high_limit_last; + + pci_read_config_byte(pdev, I82443BXGX_DRAMC, &dramc); + row_high_limit_last = 0; + for (index = 0; index < mci->nr_csrows; index++) { + csrow = &mci->csrows[index]; + pci_read_config_byte(pdev, I82443BXGX_DRB + index, &drbar); + debugf1("MC%d: " __FILE__ ": %s() Row=%d DRB = %#0x\n", + mci->mc_idx, __func__, index, drbar); + row_high_limit = ((u32) drbar << 23); + /* find the DRAM Chip Select Base address and mask */ + debugf1("MC%d: " __FILE__ ": %s() Row=%d, " + "Boundry Address=%#0x, Last = %#0x \n", + mci->mc_idx, __func__, index, row_high_limit, + row_high_limit_last); + + /* 440GX goes to 2GB, represented with a DRB of 0. */ + if (row_high_limit_last && !row_high_limit) + row_high_limit = 1UL << 31; + + /* This row is empty [p.49] */ + if (row_high_limit == row_high_limit_last) + continue; + row_base = row_high_limit_last; + csrow->first_page = row_base >> PAGE_SHIFT; + csrow->last_page = (row_high_limit >> PAGE_SHIFT) - 1; + csrow->nr_pages = csrow->last_page - csrow->first_page + 1; + /* EAP reports in 4kilobyte granularity [61] */ + csrow->grain = 1 << 12; + csrow->mtype = mtype; + /* I don't think 440BX can tell you device type? FIXME? */ + csrow->dtype = DEV_UNKNOWN; + /* Mode is global to all rows on 440BX */ + csrow->edac_mode = edac_mode; + row_high_limit_last = row_high_limit; + } +} + + +static int i82443bxgx_edacmc_probe1(struct pci_dev *pdev, int dev_idx) +{ + struct mem_ctl_info *mci; + u8 dramc; + u32 nbxcfg, ecc_mode; + enum mem_type mtype; + enum edac_type edac_mode; + + debugf0("MC: " __FILE__ ": %s()\n", __func__); + + /* Something is really hosed if PCI config space reads from + the MC aren't working. */ + if (pci_read_config_dword(pdev, I82443BXGX_NBXCFG, &nbxcfg)) + return -EIO; + + mci = edac_mc_alloc(0, I82443BXGX_NR_CSROWS, I82443BXGX_NR_CHANS); + + if (mci == NULL) + return -ENOMEM; + + debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci); + mci->dev = &pdev->dev; + mci->mtype_cap = MEM_FLAG_EDO | MEM_FLAG_SDR | MEM_FLAG_RDR; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED; + pci_read_config_byte(pdev, I82443BXGX_DRAMC, &dramc); + switch ((dramc >> I82443BXGX_DRAMC_OFFSET_DT) & (BIT(0) | BIT(1))) { + case I82443BXGX_DRAMC_DRAM_IS_EDO: + mtype = MEM_EDO; + break; + case I82443BXGX_DRAMC_DRAM_IS_SDRAM: + mtype = MEM_SDR; + break; + case I82443BXGX_DRAMC_DRAM_IS_RSDRAM: + mtype = MEM_RDR; + break; + default: + debugf0("Unknown/reserved DRAM type value in DRAMC register!\n"); + mtype = -MEM_UNKNOWN; + } + + if ((mtype == MEM_SDR) || (mtype == MEM_RDR)) + mci->edac_cap = mci->edac_ctl_cap; + else + mci->edac_cap = EDAC_FLAG_NONE; + + mci->scrub_cap = SCRUB_FLAG_HW_SRC; + pci_read_config_dword(pdev, I82443BXGX_NBXCFG, &nbxcfg); + ecc_mode = ((nbxcfg >> I82443BXGX_NBXCFG_OFFSET_DRAM_INTEGRITY) & + (BIT(0) | BIT(1))); + + mci->scrub_mode = (ecc_mode == I82443BXGX_NBXCFG_INTEGRITY_SCRUB) + ? SCRUB_HW_SRC + : SCRUB_NONE; + + switch(ecc_mode) { + case I82443BXGX_NBXCFG_INTEGRITY_NONE: + edac_mode = EDAC_NONE; + break; + case I82443BXGX_NBXCFG_INTEGRITY_EC: + edac_mode = EDAC_EC; + break; + case I82443BXGX_NBXCFG_INTEGRITY_ECC: + case I82443BXGX_NBXCFG_INTEGRITY_SCRUB: + edac_mode = EDAC_SECDED; + break; + default: + debugf0("%s(): Unknown/reserved ECC state in NBXCFG register!\n", + __func__); + edac_mode = EDAC_UNKNOWN; + break; + } + + i82443bxgx_init_csrows(mci, pdev, edac_mode, mtype); + + /* Many BIOSes don't clear error flags on boot, so do this + * here, or we get "phantom" errors occuring at module-load + * time. */ + pci_write_bits32(pdev, I82443BXGX_EAP, + (I82443BXGX_EAP_OFFSET_SBE | I82443BXGX_EAP_OFFSET_MBE), + (I82443BXGX_EAP_OFFSET_SBE | I82443BXGX_EAP_OFFSET_MBE)); + + mci->mod_name = EDAC_MOD_STR; + mci->mod_ver = I82443_REVISION; + mci->ctl_name = "I82443BXGX"; + mci->edac_check = i82443bxgx_edacmc_check; + mci->ctl_page_to_phys = NULL; + + if (edac_mc_add_mc(mci, 0)) { + debugf3("%s(): failed edac_mc_add_mc()\n", __func__); + goto fail; + } + + debugf3("MC: " __FILE__ ": %s(): success\n", __func__); + return 0; + +fail: + edac_mc_free(mci); + return -ENODEV; +} +EXPORT_SYMBOL_GPL(i82443bxgx_edacmc_probe1); + +/* returns count (>= 0), or negative on error */ +static int __devinit i82443bxgx_edacmc_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + debugf0("MC: " __FILE__ ": %s()\n", __func__); + + /* don't need to call pci_device_enable() */ + return i82443bxgx_edacmc_probe1(pdev, ent->driver_data); +} + + +static void __devexit i82443bxgx_edacmc_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + + debugf0(__FILE__ ": %s()\n", __func__); + + if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL ) + return; + + edac_mc_free(mci); +} +EXPORT_SYMBOL_GPL(i82443bxgx_edacmc_remove_one); + + +static const struct pci_device_id i82443bxgx_pci_tbl[] __devinitdata = { + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_0)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_2)}, + {0,} /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, i82443bxgx_pci_tbl); + + +static struct pci_driver i82443bxgx_edacmc_driver = { + .name = EDAC_MOD_STR, + .probe = i82443bxgx_edacmc_init_one, + .remove = __devexit_p(i82443bxgx_edacmc_remove_one), + .id_table = i82443bxgx_pci_tbl, +}; + + +static int __init i82443bxgx_edacmc_init(void) +{ + return pci_register_driver(&i82443bxgx_edacmc_driver); +} + + +static void __exit i82443bxgx_edacmc_exit(void) +{ + pci_unregister_driver(&i82443bxgx_edacmc_driver); +} + + +module_init(i82443bxgx_edacmc_init); +module_exit(i82443bxgx_edacmc_exit); + + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Tim Small - WPAD"); +MODULE_DESCRIPTION("EDAC MC support for Intel 82443BX/GX memory controllers");