diff --git a/MAINTAINERS b/MAINTAINERS
index 69e31aab130..ff968842ce5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -577,6 +577,11 @@ M:	Mike Rapoport <mike@compulab.co.il>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 
+ARM/CONTEC MICRO9 MACHINE SUPPORT
+M:	Hubert Feurstein <hubert.feurstein@contec.at>
+S:	Maintained
+F:	arch/arm/mach-ep93xx/micro9.c
+
 ARM/CORGI MACHINE SUPPORT
 M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained
diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h
index 63a481fbbed..338ff19ae44 100644
--- a/arch/arm/include/asm/bitops.h
+++ b/arch/arm/include/asm/bitops.h
@@ -84,7 +84,7 @@ ____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p)
 	*p = res | mask;
 	raw_local_irq_restore(flags);
 
-	return res & mask;
+	return (res & mask) != 0;
 }
 
 static inline int
@@ -101,7 +101,7 @@ ____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p)
 	*p = res & ~mask;
 	raw_local_irq_restore(flags);
 
-	return res & mask;
+	return (res & mask) != 0;
 }
 
 static inline int
@@ -118,7 +118,7 @@ ____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
 	*p = res ^ mask;
 	raw_local_irq_restore(flags);
 
-	return res & mask;
+	return (res & mask) != 0;
 }
 
 #include <asm-generic/bitops/non-atomic.h>
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 467b69ed102..f838f36eb70 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -45,21 +45,21 @@ static int __init user_debug_setup(char *str)
 __setup("user_debug=", user_debug_setup);
 #endif
 
-static void dump_mem(const char *str, unsigned long bottom, unsigned long top);
+static void dump_mem(const char *, const char *, unsigned long, unsigned long);
 
 void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
 {
 #ifdef CONFIG_KALLSYMS
-	printk("[<%08lx>] ", where);
-	print_symbol("(%s) ", where);
-	printk("from [<%08lx>] ", from);
-	print_symbol("(%s)\n", from);
+	char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN];
+	sprint_symbol(sym1, where);
+	sprint_symbol(sym2, from);
+	printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2);
 #else
 	printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
 #endif
 
 	if (in_exception_text(where))
-		dump_mem("Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
+		dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
 }
 
 #ifndef CONFIG_ARM_UNWIND
@@ -81,9 +81,10 @@ static int verify_stack(unsigned long sp)
 /*
  * Dump out the contents of some memory nicely...
  */
-static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
+static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
+		     unsigned long top)
 {
-	unsigned long p = bottom & ~31;
+	unsigned long first;
 	mm_segment_t fs;
 	int i;
 
@@ -95,33 +96,37 @@ static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
 	fs = get_fs();
 	set_fs(KERNEL_DS);
 
-	printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
+	printk("%s%s(0x%08lx to 0x%08lx)\n", lvl, str, bottom, top);
 
-	for (p = bottom & ~31; p < top;) {
-		printk("%04lx: ", p & 0xffff);
+	for (first = bottom & ~31; first < top; first += 32) {
+		unsigned long p;
+		char str[sizeof(" 12345678") * 8 + 1];
 
-		for (i = 0; i < 8; i++, p += 4) {
-			unsigned int val;
+		memset(str, ' ', sizeof(str));
+		str[sizeof(str) - 1] = '\0';
 
-			if (p < bottom || p >= top)
-				printk("         ");
-			else {
-				__get_user(val, (unsigned long *)p);
-				printk("%08x ", val);
+		for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
+			if (p >= bottom && p < top) {
+				unsigned long val;
+				if (__get_user(val, (unsigned long *)p) == 0)
+					sprintf(str + i * 9, " %08lx", val);
+				else
+					sprintf(str + i * 9, " ????????");
 			}
 		}
-		printk ("\n");
+		printk("%s%04lx:%s\n", lvl, first & 0xffff, str);
 	}
 
 	set_fs(fs);
 }
 
-static void dump_instr(struct pt_regs *regs)
+static void dump_instr(const char *lvl, struct pt_regs *regs)
 {
 	unsigned long addr = instruction_pointer(regs);
 	const int thumb = thumb_mode(regs);
 	const int width = thumb ? 4 : 8;
 	mm_segment_t fs;
+	char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
 	int i;
 
 	/*
@@ -132,7 +137,6 @@ static void dump_instr(struct pt_regs *regs)
 	fs = get_fs();
 	set_fs(KERNEL_DS);
 
-	printk("Code: ");
 	for (i = -4; i < 1; i++) {
 		unsigned int val, bad;
 
@@ -142,13 +146,14 @@ static void dump_instr(struct pt_regs *regs)
 			bad = __get_user(val, &((u32 *)addr)[i]);
 
 		if (!bad)
-			printk(i == 0 ? "(%0*x) " : "%0*x ", width, val);
+			p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",
+					width, val);
 		else {
-			printk("bad PC value.");
+			p += sprintf(p, "bad PC value");
 			break;
 		}
 	}
-	printk("\n");
+	printk("%sCode: %s\n", lvl, str);
 
 	set_fs(fs);
 }
@@ -224,18 +229,19 @@ static void __die(const char *str, int err, struct thread_info *thread, struct p
 	struct task_struct *tsk = thread->task;
 	static int die_counter;
 
-	printk("Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
+	printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
 	       str, err, ++die_counter);
+	sysfs_printk_last_file();
 	print_modules();
 	__show_regs(regs);
-	printk("Process %s (pid: %d, stack limit = 0x%p)\n",
-		tsk->comm, task_pid_nr(tsk), thread + 1);
+	printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
+		TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1);
 
 	if (!user_mode(regs) || in_interrupt()) {
-		dump_mem("Stack: ", regs->ARM_sp,
+		dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp,
 			 THREAD_SIZE + (unsigned long)task_stack_page(tsk));
 		dump_backtrace(regs, tsk);
-		dump_instr(regs);
+		dump_instr(KERN_EMERG, regs);
 	}
 }
 
@@ -250,13 +256,14 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
 
 	oops_enter();
 
-	console_verbose();
 	spin_lock_irq(&die_lock);
+	console_verbose();
 	bust_spinlocks(1);
 	__die(str, err, thread, regs);
 	bust_spinlocks(0);
 	add_taint(TAINT_DIE);
 	spin_unlock_irq(&die_lock);
+	oops_exit();
 
 	if (in_interrupt())
 		panic("Fatal exception in interrupt");
@@ -264,7 +271,6 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
 	if (panic_on_oops)
 		panic("Fatal exception");
 
-	oops_exit();
 	do_exit(SIGSEGV);
 }
 
@@ -349,7 +355,7 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 	if (user_debug & UDBG_UNDEFINED) {
 		printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",
 			current->comm, task_pid_nr(current), pc);
-		dump_instr(regs);
+		dump_instr(KERN_INFO, regs);
 	}
 #endif
 
@@ -400,7 +406,7 @@ static int bad_syscall(int n, struct pt_regs *regs)
 	if (user_debug & UDBG_SYSCALL) {
 		printk(KERN_ERR "[%d] %s: obsolete system call %08x.\n",
 			task_pid_nr(current), current->comm, n);
-		dump_instr(regs);
+		dump_instr(KERN_ERR, regs);
 	}
 #endif
 
@@ -579,7 +585,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 	if (user_debug & UDBG_SYSCALL) {
 		printk("[%d] %s: arm syscall %d\n",
 		       task_pid_nr(current), current->comm, no);
-		dump_instr(regs);
+		dump_instr("", regs);
 		if (user_mode(regs)) {
 			__show_regs(regs);
 			c_backtrace(regs->ARM_fp, processor_mode(regs));
@@ -656,7 +662,7 @@ baddataabort(int code, unsigned long instr, struct pt_regs *regs)
 	if (user_debug & UDBG_BADABORT) {
 		printk(KERN_ERR "[%d] %s: bad data abort: code %d instr 0x%08lx\n",
 			task_pid_nr(current), current->comm, code, instr);
-		dump_instr(regs);
+		dump_instr(KERN_ERR, regs);
 		show_pte(current->mm, addr);
 	}
 #endif
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 4b4f69251b3..e590bbe0a7b 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -271,12 +271,12 @@ static struct irqaction bcmring_timer_irq = {
 	.handler = bcmring_timer_interrupt,
 };
 
-static cycle_t bcmring_get_cycles_timer1(void)
+static cycle_t bcmring_get_cycles_timer1(struct clocksource *cs)
 {
 	return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
 }
 
-static cycle_t bcmring_get_cycles_timer3(void)
+static cycle_t bcmring_get_cycles_timer3(struct clocksource *cs)
 {
 	return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
 }
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
index cdbf93c694a..38b37060d42 100644
--- a/arch/arm/mach-bcmring/include/mach/system.h
+++ b/arch/arm/mach-bcmring/include/mach/system.h
@@ -29,7 +29,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, char *cmd)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
 
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index d7291c682a6..9167c3d2a5e 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -17,13 +17,31 @@ config EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	bool "0x00000000 - SDCE3/SyncBoot"
 	help
 	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0x00000000
+	  first SDRAM bank at 0x00000000.
 
 config EP93XX_SDCE0_PHYS_OFFSET
 	bool "0xc0000000 - SDCEO"
 	help
 	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0xc0000000
+	  first SDRAM bank at 0xc0000000.
+
+config EP93XX_SDCE1_PHYS_OFFSET
+	bool "0xd0000000 - SDCE1"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0xd0000000.
+
+config EP93XX_SDCE2_PHYS_OFFSET
+	bool "0xe0000000 - SDCE2"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0xe0000000.
+
+config EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+	bool "0xf0000000 - SDCE3/AsyncBoot"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0xf0000000.
 
 endchoice
 
@@ -112,28 +130,36 @@ config MACH_MICRO9
 	bool
 
 config MACH_MICRO9H
-	bool "Support Contec Hypercontrol Micro9-H"
+	bool "Support Contec Micro9-High"
 	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  Contec Hypercontrol Micro9-H board.
+	  Contec Micro9-High board.
 
 config MACH_MICRO9M
-	bool "Support Contec Hypercontrol Micro9-M"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	bool "Support Contec Micro9-Mid"
+	depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  Contec Hypercontrol Micro9-M board.
+	  Contec Micro9-Mid board.
 
 config MACH_MICRO9L
-	bool "Support Contec Hypercontrol Micro9-L"
+	bool "Support Contec Micro9-Lite"
 	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  Contec Hypercontrol Micro9-L board.
+	  Contec Micro9-Lite board.
+
+config MACH_MICRO9S
+	bool "Support Contec Micro9-Slim"
+	depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+	select MACH_MICRO9
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Contec Micro9-Slim board.
 
 config MACH_TS72XX
 	bool "Support Technologic Systems TS-72xx SBC"
diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot
index 27a085a8f12..0ad33f15c62 100644
--- a/arch/arm/mach-ep93xx/Makefile.boot
+++ b/arch/arm/mach-ep93xx/Makefile.boot
@@ -3,3 +3,12 @@ params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)	:= 0x00000100
 
    zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0008000
 params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)		:= 0xd0008000
+params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)		:= 0xd0000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)		:= 0xe0008000
+params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)		:= 0xe0000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)	:= 0xf0008000
+params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)	:= 0xf0000100
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index dda19cd7619..1d0f9d8aff2 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -16,13 +16,16 @@
 #include <linux/module.h>
 #include <linux/string.h>
 #include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include <mach/hardware.h>
 
 #include <asm/clkdev.h>
 #include <asm/div64.h>
-#include <mach/hardware.h>
 
 
 struct clk {
+	struct clk	*parent;
 	unsigned long	rate;
 	int		users;
 	int		sw_locked;
@@ -39,40 +42,60 @@ static unsigned long get_uart_rate(struct clk *clk);
 static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
 static int set_div_rate(struct clk *clk, unsigned long rate);
 
+
+static struct clk clk_xtali = {
+	.rate		= EP93XX_EXT_CLK_RATE,
+};
 static struct clk clk_uart1 = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_DEVCFG,
 	.enable_mask	= EP93XX_SYSCON_DEVCFG_U1EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_uart2 = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_DEVCFG,
 	.enable_mask	= EP93XX_SYSCON_DEVCFG_U2EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_uart3 = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_DEVCFG,
 	.enable_mask	= EP93XX_SYSCON_DEVCFG_U3EN,
 	.get_rate	= get_uart_rate,
 };
-static struct clk clk_pll1;
-static struct clk clk_f;
-static struct clk clk_h;
-static struct clk clk_p;
-static struct clk clk_pll2;
+static struct clk clk_pll1 = {
+	.parent		= &clk_xtali,
+};
+static struct clk clk_f = {
+	.parent		= &clk_pll1,
+};
+static struct clk clk_h = {
+	.parent		= &clk_pll1,
+};
+static struct clk clk_p = {
+	.parent		= &clk_pll1,
+};
+static struct clk clk_pll2 = {
+	.parent		= &clk_xtali,
+};
 static struct clk clk_usb_host = {
+	.parent		= &clk_pll2,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_USH_EN,
 };
 static struct clk clk_keypad = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_KEYTCHCLKDIV,
 	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
 	.set_rate	= set_keytchclk_rate,
 };
 static struct clk clk_pwm = {
+	.parent		= &clk_xtali,
 	.rate		= EP93XX_EXT_CLK_RATE,
 };
 
@@ -85,50 +108,62 @@ static struct clk clk_video = {
 
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P0,
 };
 static struct clk clk_m2p1 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P1,
 };
 static struct clk clk_m2p2 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P2,
 };
 static struct clk clk_m2p3 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P3,
 };
 static struct clk clk_m2p4 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P4,
 };
 static struct clk clk_m2p5 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P5,
 };
 static struct clk clk_m2p6 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P6,
 };
 static struct clk clk_m2p7 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P7,
 };
 static struct clk clk_m2p8 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P8,
 };
 static struct clk clk_m2p9 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P9,
 };
 static struct clk clk_m2m0 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M0,
 };
 static struct clk clk_m2m1 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M1,
 };
@@ -137,6 +172,7 @@ static struct clk clk_m2m1 = {
 	{ .dev_id = dev, .con_id = con, .clk = ck }
 
 static struct clk_lookup clocks[] = {
+	INIT_CK(NULL,			"xtali",	&clk_xtali),
 	INIT_CK("apb:uart1",		NULL,		&clk_uart1),
 	INIT_CK("apb:uart2",		NULL,		&clk_uart2),
 	INIT_CK("apb:uart3",		NULL,		&clk_uart3),
@@ -163,48 +199,84 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL,			"m2m1",		&clk_m2m1),
 };
 
+static DEFINE_SPINLOCK(clk_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+	if (!clk->users++) {
+		if (clk->parent)
+			__clk_enable(clk->parent);
+
+		if (clk->enable_reg) {
+			u32 v;
+
+			v = __raw_readl(clk->enable_reg);
+			v |= clk->enable_mask;
+			if (clk->sw_locked)
+				ep93xx_syscon_swlocked_write(v, clk->enable_reg);
+			else
+				__raw_writel(v, clk->enable_reg);
+		}
+	}
+}
 
 int clk_enable(struct clk *clk)
 {
-	if (!clk->users++ && clk->enable_reg) {
-		u32 value;
+	unsigned long flags;
 
-		value = __raw_readl(clk->enable_reg);
-		value |= clk->enable_mask;
-		if (clk->sw_locked)
-			ep93xx_syscon_swlocked_write(value, clk->enable_reg);
-		else
-			__raw_writel(value, clk->enable_reg);
-	}
+	if (!clk)
+		return -EINVAL;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_enable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
 
 	return 0;
 }
 EXPORT_SYMBOL(clk_enable);
 
+static void __clk_disable(struct clk *clk)
+{
+	if (!--clk->users) {
+		if (clk->enable_reg) {
+			u32 v;
+
+			v = __raw_readl(clk->enable_reg);
+			v &= ~clk->enable_mask;
+			if (clk->sw_locked)
+				ep93xx_syscon_swlocked_write(v, clk->enable_reg);
+			else
+				__raw_writel(v, clk->enable_reg);
+		}
+
+		if (clk->parent)
+			__clk_disable(clk->parent);
+	}
+}
+
 void clk_disable(struct clk *clk)
 {
-	if (!--clk->users && clk->enable_reg) {
-		u32 value;
+	unsigned long flags;
 
-		value = __raw_readl(clk->enable_reg);
-		value &= ~clk->enable_mask;
-		if (clk->sw_locked)
-			ep93xx_syscon_swlocked_write(value, clk->enable_reg);
-		else
-			__raw_writel(value, clk->enable_reg);
-	}
+	if (!clk)
+		return;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_disable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);
 
 static unsigned long get_uart_rate(struct clk *clk)
 {
+	unsigned long rate = clk_get_rate(clk->parent);
 	u32 value;
 
 	value = __raw_readl(EP93XX_SYSCON_PWRCNT);
 	if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
-		return EP93XX_EXT_CLK_RATE;
+		return rate;
 	else
-		return EP93XX_EXT_CLK_RATE / 2;
+		return rate / 2;
 }
 
 unsigned long clk_get_rate(struct clk *clk)
@@ -244,16 +316,16 @@ static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
-				  int *pdiv, int *div)
+static int calc_clk_div(struct clk *clk, unsigned long rate,
+			int *psel, int *esel, int *pdiv, int *div)
 {
-	unsigned long max_rate, best_rate = 0,
-		actual_rate = 0, mclk_rate = 0, rate_err = -1;
+	struct clk *mclk;
+	unsigned long max_rate, actual_rate, mclk_rate, rate_err = -1;
 	int i, found = 0, __div = 0, __pdiv = 0;
 
 	/* Don't exceed the maximum rate */
 	max_rate = max(max(clk_pll1.rate / 4, clk_pll2.rate / 4),
-		       (unsigned long)EP93XX_EXT_CLK_RATE / 4);
+		       clk_xtali.rate / 4);
 	rate = min(rate, max_rate);
 
 	/*
@@ -267,11 +339,12 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
 	 */
 	for (i = 0; i < 3; i++) {
 		if (i == 0)
-			mclk_rate = EP93XX_EXT_CLK_RATE * 2;
+			mclk = &clk_xtali;
 		else if (i == 1)
-			mclk_rate = clk_pll1.rate * 2;
-		else if (i == 2)
-			mclk_rate = clk_pll2.rate * 2;
+			mclk = &clk_pll1;
+		else
+			mclk = &clk_pll2;
+		mclk_rate = mclk->rate * 2;
 
 		/* Try each predivider value */
 		for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
@@ -286,7 +359,8 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
 				*div = __div;
 				*psel = (i == 2);
 				*esel = (i != 0);
-				best_rate = actual_rate;
+				clk->parent = mclk;
+				clk->rate = actual_rate;
 				rate_err = abs(actual_rate - rate);
 				found = 1;
 			}
@@ -294,21 +368,19 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
 	}
 
 	if (!found)
-		return 0;
+		return -EINVAL;
 
-	return best_rate;
+	return 0;
 }
 
 static int set_div_rate(struct clk *clk, unsigned long rate)
 {
-	unsigned long actual_rate;
-	int psel = 0, esel = 0, pdiv = 0, div = 0;
+	int err, psel = 0, esel = 0, pdiv = 0, div = 0;
 	u32 val;
 
-	actual_rate = calc_clk_div(rate, &psel, &esel, &pdiv, &div);
-	if (actual_rate == 0)
-		return -EINVAL;
-	clk->rate = actual_rate;
+	err = calc_clk_div(clk, rate, &psel, &esel, &pdiv, &div);
+	if (err)
+		return err;
 
 	/* Clear the esel, psel, pdiv and div bits */
 	val = __raw_readl(clk->enable_reg);
@@ -344,7 +416,7 @@ static unsigned long calc_pll_rate(u32 config_word)
 	unsigned long long rate;
 	int i;
 
-	rate = EP93XX_EXT_CLK_RATE;
+	rate = clk_xtali.rate;
 	rate *= ((config_word >> 11) & 0x1f) + 1;		/* X1FBD */
 	rate *= ((config_word >> 5) & 0x3f) + 1;		/* X2FBD */
 	do_div(rate, (config_word & 0x1f) + 1);			/* X2IPD */
@@ -377,7 +449,7 @@ static int __init ep93xx_clock_init(void)
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
 	if (!(value & 0x00800000)) {			/* PLL1 bypassed?  */
-		clk_pll1.rate = EP93XX_EXT_CLK_RATE;
+		clk_pll1.rate = clk_xtali.rate;
 	} else {
 		clk_pll1.rate = calc_pll_rate(value);
 	}
@@ -388,7 +460,7 @@ static int __init ep93xx_clock_init(void)
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
 	if (!(value & 0x00080000)) {			/* PLL2 bypassed?  */
-		clk_pll2.rate = EP93XX_EXT_CLK_RATE;
+		clk_pll2.rate = clk_xtali.rate;
 	} else if (value & 0x00040000) {		/* PLL2 enabled?  */
 		clk_pll2.rate = calc_pll_rate(value);
 	} else {
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index f7ebed942f6..f95dc160c34 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -550,13 +550,11 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
 	platform_device_register(&ep93xx_eth_device);
 }
 
-static struct i2c_gpio_platform_data ep93xx_i2c_data = {
-	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
-	.sda_is_open_drain	= 0,
-	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
-	.scl_is_open_drain	= 0,
-	.udelay			= 2,
-};
+
+/*************************************************************************
+ * EP93xx i2c peripheral handling
+ *************************************************************************/
+static struct i2c_gpio_platform_data ep93xx_i2c_data;
 
 static struct platform_device ep93xx_i2c_device = {
 	.name			= "i2c-gpio",
@@ -564,8 +562,25 @@ static struct platform_device ep93xx_i2c_device = {
 	.dev.platform_data	= &ep93xx_i2c_data,
 };
 
-void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
+void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
+				struct i2c_board_info *devices, int num)
 {
+	/*
+	 * Set the EEPROM interface pin drive type control.
+	 * Defines the driver type for the EECLK and EEDAT pins as either
+	 * open drain, which will require an external pull-up, or a normal
+	 * CMOS driver.
+	 */
+	if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT)
+		pr_warning("ep93xx: sda != EEDAT, open drain has no effect\n");
+	if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK)
+		pr_warning("ep93xx: scl != EECLK, open drain has no effect\n");
+
+	__raw_writel((data->sda_is_open_drain << 1) |
+		     (data->scl_is_open_drain << 0),
+		     EP93XX_GPIO_EEDRIVE);
+
+	ep93xx_i2c_data = *data;
 	i2c_register_board_info(0, devices, num);
 	platform_device_register(&ep93xx_i2c_device);
 }
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 73145ae5d3f..ca71cf1a72a 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -27,8 +27,10 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/i2c.h>
 #include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
 
 #include <mach/hardware.h>
 
@@ -76,13 +78,26 @@ static struct ep93xx_eth_data edb93xx_eth_data = {
 	.phy_id		= 1,
 };
 
-static struct i2c_board_info __initdata edb93xxa_i2c_data[] = {
+
+/*************************************************************************
+ * EDB93xx i2c peripheral handling
+ *************************************************************************/
+static struct i2c_gpio_platform_data edb93xx_i2c_gpio_data = {
+	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
+	.sda_is_open_drain	= 0,
+	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
+	.scl_is_open_drain	= 0,
+	.udelay			= 0,	/* default to 100 kHz */
+	.timeout		= 0,	/* default to 100 ms */
+};
+
+static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("isl1208", 0x6f),
 	},
 };
 
-static struct i2c_board_info __initdata edb93xx_i2c_data[] = {
+static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("ds1337", 0x68),
 	},
@@ -92,12 +107,14 @@ static void __init edb93xx_register_i2c(void)
 {
 	if (machine_is_edb9302a() || machine_is_edb9307a() ||
 	    machine_is_edb9315a()) {
-		ep93xx_register_i2c(edb93xxa_i2c_data,
-				ARRAY_SIZE(edb93xxa_i2c_data));
+		ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
+				    edb93xxa_i2c_board_info,
+				    ARRAY_SIZE(edb93xxa_i2c_board_info));
 	} else if (machine_is_edb9307() || machine_is_edb9312() ||
 		   machine_is_edb9315()) {
-		ep93xx_register_i2c(edb93xx_i2c_data,
-				ARRAY_SIZE(edb93xx_i2c_data));
+		ep93xx_register_i2c(&edb93xx_i2c_gpio_data
+				    edb93xx_i2c_board_info,
+				    ARRAY_SIZE(edb93xx_i2c_board_info));
 	}
 }
 
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 0fbf87b1633..b1f937eda29 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -52,25 +52,27 @@
 #define EP93XX_AHB_VIRT_BASE		0xfef00000
 #define EP93XX_AHB_SIZE			0x00100000
 
+#define EP93XX_AHB_PHYS(x)		(EP93XX_AHB_PHYS_BASE + (x))
 #define EP93XX_AHB_IOMEM(x)		IOMEM(EP93XX_AHB_VIRT_BASE + (x))
 
 #define EP93XX_APB_PHYS_BASE		0x80800000
 #define EP93XX_APB_VIRT_BASE		0xfed00000
 #define EP93XX_APB_SIZE			0x00200000
 
+#define EP93XX_APB_PHYS(x)		(EP93XX_APB_PHYS_BASE + (x))
 #define EP93XX_APB_IOMEM(x)		IOMEM(EP93XX_APB_VIRT_BASE + (x))
 
 
 /* AHB peripherals */
 #define EP93XX_DMA_BASE			EP93XX_AHB_IOMEM(0x00000000)
 
-#define EP93XX_ETHERNET_PHYS_BASE	(EP93XX_AHB_PHYS_BASE + 0x00010000)
+#define EP93XX_ETHERNET_PHYS_BASE	EP93XX_AHB_PHYS(0x00010000)
 #define EP93XX_ETHERNET_BASE		EP93XX_AHB_IOMEM(0x00010000)
 
-#define EP93XX_USB_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00020000)
+#define EP93XX_USB_PHYS_BASE		EP93XX_AHB_PHYS(0x00020000)
 #define EP93XX_USB_BASE			EP93XX_AHB_IOMEM(0x00020000)
 
-#define EP93XX_RASTER_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00030000)
+#define EP93XX_RASTER_PHYS_BASE		EP93XX_AHB_PHYS(0x00030000)
 #define EP93XX_RASTER_BASE		EP93XX_AHB_IOMEM(0x00030000)
 
 #define EP93XX_GRAPHICS_ACCEL_BASE	EP93XX_AHB_IOMEM(0x00040000)
@@ -112,21 +114,10 @@
 
 #define EP93XX_GPIO_BASE		EP93XX_APB_IOMEM(0x00040000)
 #define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
-#define EP93XX_GPIO_F_INT_TYPE1		EP93XX_GPIO_REG(0x4c)
-#define EP93XX_GPIO_F_INT_TYPE2		EP93XX_GPIO_REG(0x50)
-#define EP93XX_GPIO_F_INT_ACK		EP93XX_GPIO_REG(0x54)
-#define EP93XX_GPIO_F_INT_ENABLE	EP93XX_GPIO_REG(0x58)
 #define EP93XX_GPIO_F_INT_STATUS	EP93XX_GPIO_REG(0x5c)
-#define EP93XX_GPIO_A_INT_TYPE1		EP93XX_GPIO_REG(0x90)
-#define EP93XX_GPIO_A_INT_TYPE2		EP93XX_GPIO_REG(0x94)
-#define EP93XX_GPIO_A_INT_ACK		EP93XX_GPIO_REG(0x98)
-#define EP93XX_GPIO_A_INT_ENABLE	EP93XX_GPIO_REG(0x9c)
 #define EP93XX_GPIO_A_INT_STATUS	EP93XX_GPIO_REG(0xa0)
-#define EP93XX_GPIO_B_INT_TYPE1		EP93XX_GPIO_REG(0xac)
-#define EP93XX_GPIO_B_INT_TYPE2		EP93XX_GPIO_REG(0xb0)
-#define EP93XX_GPIO_B_INT_ACK		EP93XX_GPIO_REG(0xb4)
-#define EP93XX_GPIO_B_INT_ENABLE	EP93XX_GPIO_REG(0xb8)
 #define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
+#define EP93XX_GPIO_EEDRIVE		EP93XX_GPIO_REG(0xc8)
 
 #define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)
 
@@ -134,13 +125,13 @@
 
 #define EP93XX_IRDA_BASE		EP93XX_APB_IOMEM(0x000b0000)
 
-#define EP93XX_UART1_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000c0000)
+#define EP93XX_UART1_PHYS_BASE		EP93XX_APB_PHYS(0x000c0000)
 #define EP93XX_UART1_BASE		EP93XX_APB_IOMEM(0x000c0000)
 
-#define EP93XX_UART2_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000d0000)
+#define EP93XX_UART2_PHYS_BASE		EP93XX_APB_PHYS(0x000d0000)
 #define EP93XX_UART2_BASE		EP93XX_APB_IOMEM(0x000d0000)
 
-#define EP93XX_UART3_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000e0000)
+#define EP93XX_UART3_PHYS_BASE		EP93XX_APB_PHYS(0x000e0000)
 #define EP93XX_UART3_BASE		EP93XX_APB_IOMEM(0x000e0000)
 
 #define EP93XX_KEY_MATRIX_BASE		EP93XX_APB_IOMEM(0x000f0000)
@@ -148,10 +139,10 @@
 #define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
 #define EP93XX_TOUCHSCREEN_BASE		EP93XX_APB_IOMEM(0x00100000)
 
-#define EP93XX_PWM_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00110000)
+#define EP93XX_PWM_PHYS_BASE		EP93XX_APB_PHYS(0x00110000)
 #define EP93XX_PWM_BASE			EP93XX_APB_IOMEM(0x00110000)
 
-#define EP93XX_RTC_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00120000)
+#define EP93XX_RTC_PHYS_BASE		EP93XX_APB_PHYS(0x00120000)
 #define EP93XX_RTC_BASE			EP93XX_APB_IOMEM(0x00120000)
 
 #define EP93XX_SYSCON_BASE		EP93XX_APB_IOMEM(0x00130000)
@@ -218,6 +209,17 @@
 #define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	(1<<16)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_KEN	(1<<15)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV	(1<<0)
+#define EP93XX_SYSCON_SYSCFG		EP93XX_SYSCON_REG(0x9c)
+#define EP93XX_SYSCON_SYSCFG_REV_MASK	(0xf0000000)
+#define EP93XX_SYSCON_SYSCFG_REV_SHIFT	(28)
+#define EP93XX_SYSCON_SYSCFG_SBOOT	(1<<8)
+#define EP93XX_SYSCON_SYSCFG_LCSN7	(1<<7)
+#define EP93XX_SYSCON_SYSCFG_LCSN6	(1<<6)
+#define EP93XX_SYSCON_SYSCFG_LASDO	(1<<5)
+#define EP93XX_SYSCON_SYSCFG_LEEDA	(1<<4)
+#define EP93XX_SYSCON_SYSCFG_LEECLK	(1<<3)
+#define EP93XX_SYSCON_SYSCFG_LCSN2	(1<<1)
+#define EP93XX_SYSCON_SYSCFG_LCSN1	(1<<0)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
 #define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)
diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h
index 0a1498ae899..c991b149bdf 100644
--- a/arch/arm/mach-ep93xx/include/mach/gpio.h
+++ b/arch/arm/mach-ep93xx/include/mach/gpio.h
@@ -114,17 +114,9 @@ extern void ep93xx_gpio_int_debounce(unsigned int irq, int enable);
  *          B0..B7  (7..15) to irq 72..79, and
  *          F0..F7 (16..24) to irq 80..87.
  */
-static inline int gpio_to_irq(unsigned gpio)
-{
-	if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ)
-		return 64 + gpio;
+#define gpio_to_irq(gpio)	\
+	(((gpio) <= EP93XX_GPIO_LINE_MAX_IRQ) ? (64 + (gpio)) : -EINVAL)
 
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return irq - gpio_to_irq(0);
-}
+#define irq_to_gpio(irq)	((irq) - gpio_to_irq(0))
 
 #endif
diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
index 925b12ea099..554064e9030 100644
--- a/arch/arm/mach-ep93xx/include/mach/memory.h
+++ b/arch/arm/mach-ep93xx/include/mach/memory.h
@@ -9,6 +9,12 @@
 #define PHYS_OFFSET		UL(0x00000000)
 #elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
 #define PHYS_OFFSET		UL(0xc0000000)
+#elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)
+#define PHYS_OFFSET		UL(0xd0000000)
+#elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)
+#define PHYS_OFFSET		UL(0xe0000000)
+#elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)
+#define PHYS_OFFSET		UL(0xf0000000)
 #else
 #error "Kconfig bug: No EP93xx PHYS_OFFSET set"
 #endif
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 01a0f0838e5..a3ec33fd79d 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -4,6 +4,7 @@
 
 #ifndef __ASSEMBLY__
 
+struct i2c_gpio_platform_data;
 struct i2c_board_info;
 struct platform_device;
 struct ep93xxfb_mach_info;
@@ -33,7 +34,8 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
 }
 
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
-void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
+			 struct i2c_board_info *devices, int num);
 void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
 void ep93xx_register_pwm(int pwm0, int pwm1);
 int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 0a313e82fb7..d83b80478b0 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -2,7 +2,9 @@
  *  linux/arch/arm/mach-ep93xx/micro9.c
  *
  * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
- *                   Manfred Gruber <manfred.gruber@contec.at>
+ *                    Manfred Gruber <m.gruber@tirol.com>
+ * Copyright (C) 2009 Contec Steuerungstechnik & Automation GmbH
+ *                    Hubert Feurstein <hubert.feurstein@contec.at>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -20,104 +22,124 @@
 #include <asm/mach/arch.h>
 
 
-static struct ep93xx_eth_data micro9_eth_data = {
-	.phy_id		= 0x1f,
-};
+/*************************************************************************
+ * Micro9 NOR Flash
+ *
+ * Micro9-High has up to 64MB of 32-bit flash on CS1
+ * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
+ * Micro9-Lite uses a seperate MTD map driver for flash support
+ * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
+ *************************************************************************/
+static struct physmap_flash_data micro9_flash_data;
 
-static void __init micro9_init(void)
-{
-	ep93xx_register_eth(&micro9_eth_data, 1);
-}
-
-/*
- * Micro9-H
- */
-#ifdef CONFIG_MACH_MICRO9H
-static struct physmap_flash_data micro9h_flash_data = {
-	.width		= 4,
-};
-
-static struct resource micro9h_flash_resource = {
+static struct resource micro9_flash_resource = {
 	.start		= EP93XX_CS1_PHYS_BASE,
 	.end		= EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
-static struct platform_device micro9h_flash = {
+static struct platform_device micro9_flash = {
 	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
-		.platform_data	= &micro9h_flash_data,
+		.platform_data	= &micro9_flash_data,
 	},
 	.num_resources	= 1,
-	.resource	= &micro9h_flash_resource,
+	.resource	= &micro9_flash_resource,
 };
 
-static void __init micro9h_init(void)
+static void __init __micro9_register_flash(unsigned int width)
 {
-	platform_device_register(&micro9h_flash);
+	micro9_flash_data.width = width;
+
+	platform_device_register(&micro9_flash);
 }
 
-static void __init micro9h_init_machine(void)
+static unsigned int __init micro9_detect_bootwidth(void)
+{
+	u32 v;
+
+	/* Detect the bus width of the external flash memory */
+	v = __raw_readl(EP93XX_SYSCON_SYSCFG);
+	if (v & EP93XX_SYSCON_SYSCFG_LCSN7)
+		return 4; /* 32-bit */
+	else
+		return 2; /* 16-bit */
+}
+
+static void __init micro9_register_flash(void)
+{
+	if (machine_is_micro9())
+		__micro9_register_flash(4);
+	else if (machine_is_micro9m() || machine_is_micro9s())
+		__micro9_register_flash(micro9_detect_bootwidth());
+}
+
+
+/*************************************************************************
+ * Micro9 Ethernet
+ *************************************************************************/
+static struct ep93xx_eth_data micro9_eth_data = {
+	.phy_id		= 0x1f,
+};
+
+
+static void __init micro9_init_machine(void)
 {
 	ep93xx_init_devices();
-	micro9_init();
-	micro9h_init();
+	ep93xx_register_eth(&micro9_eth_data, 1);
+	micro9_register_flash();
 }
 
-MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
-	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+
+#ifdef CONFIG_MACH_MICRO9H
+MACHINE_START(MICRO9, "Contec Micro9-High")
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
-	.init_machine	= micro9h_init_machine,
+	.init_machine	= micro9_init_machine,
 MACHINE_END
 #endif
 
-/*
- * Micro9-M
- */
 #ifdef CONFIG_MACH_MICRO9M
-static void __init micro9m_init_machine(void)
-{
-	ep93xx_init_devices();
-	micro9_init();
-}
-
-MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
-	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+MACHINE_START(MICRO9M, "Contec Micro9-Mid")
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
-	.init_machine	= micro9m_init_machine,
+	.init_machine	= micro9_init_machine,
 MACHINE_END
 #endif
 
-/*
- * Micro9-L
- */
 #ifdef CONFIG_MACH_MICRO9L
-static void __init micro9l_init_machine(void)
-{
-	ep93xx_init_devices();
-	micro9_init();
-}
-
-MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
-	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+MACHINE_START(MICRO9L, "Contec Micro9-Lite")
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
-	.init_machine	= micro9l_init_machine,
+	.init_machine	= micro9_init_machine,
 MACHINE_END
 #endif
 
+#ifdef CONFIG_MACH_MICRO9S
+MACHINE_START(MICRO9S, "Contec Micro9-Slim")
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= micro9_init_machine,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 3a8ee2272ad..983cc8c2008 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -155,7 +155,7 @@ MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table
 
 static pxa_freqs_t pxa27x_freqs[] = {
 	{104000, 104000, PXA27x_CCCR(1,	 8, 2), 0, CCLKCFG2(1, 0, 1),  900000, 1705000 },
-	{156000, 104000, PXA27x_CCCR(1,	 8, 6), 0, CCLKCFG2(1, 1, 1), 1000000, 1705000 },
+	{156000, 104000, PXA27x_CCCR(1,	 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 },
 	{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
 	{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
 	{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 79141f86272..965480eb4fe 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -238,7 +238,7 @@ static struct resource csb726_lan_resources[] = {
 };
 
 struct smsc911x_platform_config csb726_lan_config = {
-	.irq_type	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
 	.flags		= SMSC911X_USE_32BIT,
 	.phy_interface	= PHY_INTERFACE_MODE_MII,
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 8a5546e6d54..bb7b8198d0c 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -25,6 +25,7 @@ led-$(CONFIG_SA1100_CERF)		+= leds-cerf.o
 
 obj-$(CONFIG_SA1100_COLLIE)		+= collie.o
 
+obj-$(CONFIG_SA1100_H3100)		+= h3600.o
 obj-$(CONFIG_SA1100_H3600)		+= h3600.o
 
 obj-$(CONFIG_SA1100_HACKKIT)		+= hackkit.o
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 8f5c13f4c93..295e25dd638 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -12,6 +12,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
+#include <asm/unwind.h>
 
 #include "proc-macros.S"
 
@@ -121,11 +122,13 @@ ENTRY(v6_coherent_kern_range)
  *	- the Icache does not read data from the write buffer
  */
 ENTRY(v6_coherent_user_range)
-
+ UNWIND(.fnstart		)
 #ifdef HARVARD_CACHE
 	bic	r0, r0, #CACHE_LINE_SIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D line
+1:
+ USER(	mcr	p15, 0, r0, c7, c10, 1	)	@ clean D line
 	add	r0, r0, #CACHE_LINE_SIZE
+2:
 	cmp	r0, r1
 	blo	1b
 #endif
@@ -142,6 +145,19 @@ ENTRY(v6_coherent_user_range)
 #endif
 	mov	pc, lr
 
+/*
+ * Fault handling for the cache operation above. If the virtual address in r0
+ * isn't mapped, just try the next page.
+ */
+9001:
+	mov	r0, r0, lsr #12
+	mov	r0, r0, lsl #12
+	add	r0, r0, #4096
+	b	2b
+ UNWIND(.fnend		)
+ENDPROC(v6_coherent_user_range)
+ENDPROC(v6_coherent_kern_range)
+
 /*
  *	v6_flush_kern_dcache_page(kaddr)
  *
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index bda0ec31a4e..e1bd9759617 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -13,6 +13,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
+#include <asm/unwind.h>
 
 #include "proc-macros.S"
 
@@ -153,13 +154,16 @@ ENTRY(v7_coherent_kern_range)
  *	- the Icache does not read data from the write buffer
  */
 ENTRY(v7_coherent_user_range)
+ UNWIND(.fnstart		)
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r0, r0, r3
-1:	mcr	p15, 0, r0, c7, c11, 1		@ clean D line to the point of unification
+1:
+ USER(	mcr	p15, 0, r0, c7, c11, 1	)	@ clean D line to the point of unification
 	dsb
-	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I line
+ USER(	mcr	p15, 0, r0, c7, c5, 1	)	@ invalidate I line
 	add	r0, r0, r2
+2:
 	cmp	r0, r1
 	blo	1b
 	mov	r0, #0
@@ -167,6 +171,17 @@ ENTRY(v7_coherent_user_range)
 	dsb
 	isb
 	mov	pc, lr
+
+/*
+ * Fault handling for the cache operation above. If the virtual address in r0
+ * isn't mapped, just try the next page.
+ */
+9001:
+	mov	r0, r0, lsr #12
+	mov	r0, r0, lsl #12
+	add	r0, r0, #4096
+	b	2b
+ UNWIND(.fnend		)
 ENDPROC(v7_coherent_kern_range)
 ENDPROC(v7_coherent_user_range)
 
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index bc0099d5ae8..d0d17b6a370 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -153,14 +153,11 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
 
 	page = pfn_to_page(pfn);
 	mapping = page_mapping(page);
-	if (mapping) {
 #ifndef CONFIG_SMP
-		int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
-
-		if (dirty)
-			__flush_dcache_page(mapping, page);
+	if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
+		__flush_dcache_page(mapping, page);
 #endif
-
+	if (mapping) {
 		if (cache_is_vivt())
 			make_coherent(mapping, vma, addr, pfn);
 		else if (vma->vm_flags & VM_EXEC)
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index ae0e25f5a70..10e06801afb 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -292,6 +292,11 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		 * down_read()
 		 */
 		might_sleep();
+#ifdef CONFIG_DEBUG_VM
+		if (!user_mode(regs) &&
+		    !search_exception_tables(regs->ARM_pc))
+			goto no_context;
+#endif
 	}
 
 	fault = __do_page_fault(mm, addr, fsr, tsk);
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index 73cae57fa70..30f82fb5918 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -46,6 +46,8 @@ void *kmap_atomic(struct page *page, enum km_type type)
 	if (!PageHighMem(page))
 		return page_address(page);
 
+	debug_kmap_atomic(type);
+
 	kmap = kmap_high_get(page);
 	if (kmap)
 		return kmap;
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 877c492f8e1..40940d7ce4f 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -483,7 +483,7 @@ free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn)
 	/*
 	 * Convert start_pfn/end_pfn to a struct page pointer.
 	 */
-	start_pg = pfn_to_page(start_pfn);
+	start_pg = pfn_to_page(start_pfn - 1) + 1;
 	end_pg = pfn_to_page(end_pfn);
 
 	/*
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 5e0b1529964..b00d6731905 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -693,7 +693,7 @@ static int pxamci_probe(struct platform_device *pdev)
 	if (gpio_is_valid(gpio_ro)) {
 		ret = gpio_request(gpio_ro, "mmc card read only");
 		if (ret) {
-			dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_power);
+			dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_ro);
 			goto err_gpio_ro;
 		}
 		gpio_direction_input(gpio_ro);
@@ -701,7 +701,7 @@ static int pxamci_probe(struct platform_device *pdev)
 	if (gpio_is_valid(gpio_cd)) {
 		ret = gpio_request(gpio_cd, "mmc card detect");
 		if (ret) {
-			dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_power);
+			dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_cd);
 			goto err_gpio_cd;
 		}
 		gpio_direction_input(gpio_cd);
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index 958a3ffc898..ff5bbb9c43c 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -1826,7 +1826,7 @@ static struct amba_id pl022_ids[] = {
 		 * ST Micro derivative, this has 32bit wide
 		 * and 32 locations deep TX/RX FIFO
 		 */
-		.id	= 0x00108022,
+		.id	= 0x01080022,
 		.mask	= 0xffffffff,
 		.data	= &vendor_st,
 	},