dect
/
linux-2.6
Archived
13
0
Fork 0

lockup_detector: Combine nmi_watchdog and softlockup detector

The new nmi_watchdog (which uses the perf event subsystem) is very
similar in structure to the softlockup detector.  Using Ingo's
suggestion, I combined the two functionalities into one file:
kernel/watchdog.c.

Now both the nmi_watchdog (or hardlockup detector) and softlockup
detector sit on top of the perf event subsystem, which is run every
60 seconds or so to see if there are any lockups.

To detect hardlockups, cpus not responding to interrupts, I
implemented an hrtimer that runs 5 times for every perf event
overflow event.  If that stops counting on a cpu, then the cpu is
most likely in trouble.

To detect softlockups, tasks not yielding to the scheduler, I used the
previous kthread idea that now gets kicked every time the hrtimer fires.
If the kthread isn't being scheduled neither is anyone else and the
warning is printed to the console.

I tested this on x86_64 and both the softlockup and hardlockup paths
work.

V2:
- cleaned up the Kconfig and softlockup combination
- surrounded hardlockup cases with #ifdef CONFIG_PERF_EVENTS_NMI
- seperated out the softlockup case from perf event subsystem
- re-arranged the enabling/disabling nmi watchdog from proc space
- added cpumasks for hardlockup failure cases
- removed fallback to soft events if no PMU exists for hard events

V3:
- comment cleanups
- drop support for older softlockup code
- per_cpu cleanups
- completely remove software clock base hardlockup detector
- use per_cpu masking on hard/soft lockup detection
- #ifdef cleanups
- rename config option NMI_WATCHDOG to LOCKUP_DETECTOR
- documentation additions

V4:
- documentation fixes
- convert per_cpu to __get_cpu_var
- powerpc compile fixes

V5:
- split apart warn flags for hard and soft lockups

TODO:
- figure out how to make an arch-agnostic clock2cycles call
  (if possible) to feed into perf events as a sample period

[fweisbec: merged conflict patch]

Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <1273266711-18706-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
This commit is contained in:
Don Zickus 2010-05-07 17:11:44 -04:00 committed by Frederic Weisbecker
parent a9aa1d02de
commit 58687acba5
12 changed files with 650 additions and 29 deletions

View File

@ -1777,6 +1777,8 @@ and is between 256 and 4096 characters. It is defined in the file
nousb [USB] Disable the USB subsystem
nowatchdog [KNL] Disable the lockup detector.
nowb [ARM]
nox2apic [X86-64,APIC] Do not enable x2APIC mode.

View File

@ -17,7 +17,7 @@ int do_nmi_callback(struct pt_regs *regs, int cpu);
extern void die_nmi(char *str, struct pt_regs *regs, int do_panic);
extern int check_nmi_watchdog(void);
#if !defined(CONFIG_NMI_WATCHDOG)
#if !defined(CONFIG_LOCKUP_DETECTOR)
extern int nmi_watchdog_enabled;
#endif
extern int avail_to_resrv_perfctr_nmi_bit(unsigned int);

View File

@ -3,10 +3,10 @@
#
obj-$(CONFIG_X86_LOCAL_APIC) += apic.o apic_noop.o probe_$(BITS).o ipi.o
ifneq ($(CONFIG_NMI_WATCHDOG),y)
ifneq ($(CONFIG_LOCKUP_DETECTOR),y)
obj-$(CONFIG_X86_LOCAL_APIC) += nmi.o
endif
obj-$(CONFIG_NMI_WATCHDOG) += hw_nmi.o
obj-$(CONFIG_LOCKUP_DETECTOR) += hw_nmi.o
obj-$(CONFIG_X86_IO_APIC) += io_apic.o
obj-$(CONFIG_SMP) += ipi.o

View File

@ -89,7 +89,7 @@ int hw_nmi_is_cpu_stuck(struct pt_regs *regs)
u64 hw_nmi_get_sample_period(void)
{
return cpu_khz * 1000;
return (u64)(cpu_khz) * 1000 * 60;
}
#ifdef ARCH_HAS_NMI_WATCHDOG

View File

@ -406,7 +406,7 @@ static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
== NOTIFY_STOP)
return;
#ifndef CONFIG_NMI_WATCHDOG
#ifndef CONFIG_LOCKUP_DETECTOR
/*
* Ok, so this is none of the documented NMI sources,
* so it must be the NMI watchdog.
@ -414,7 +414,7 @@ static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
if (nmi_watchdog_tick(regs, reason))
return;
if (!do_nmi_callback(regs, cpu))
#endif /* !CONFIG_NMI_WATCHDOG */
#endif /* !CONFIG_LOCKUP_DETECTOR */
unknown_nmi_error(reason, regs);
#else
unknown_nmi_error(reason, regs);

View File

@ -20,7 +20,7 @@ extern void touch_nmi_watchdog(void);
extern void acpi_nmi_disable(void);
extern void acpi_nmi_enable(void);
#else
#ifndef CONFIG_NMI_WATCHDOG
#ifndef CONFIG_LOCKUP_DETECTOR
static inline void touch_nmi_watchdog(void)
{
touch_softlockup_watchdog();
@ -51,12 +51,12 @@ static inline bool trigger_all_cpu_backtrace(void)
}
#endif
#ifdef CONFIG_NMI_WATCHDOG
#ifdef CONFIG_LOCKUP_DETECTOR
int hw_nmi_is_cpu_stuck(struct pt_regs *);
u64 hw_nmi_get_sample_period(void);
extern int nmi_watchdog_enabled;
extern int watchdog_enabled;
struct ctl_table;
extern int proc_nmi_enabled(struct ctl_table *, int ,
extern int proc_dowatchdog_enabled(struct ctl_table *, int ,
void __user *, size_t *, loff_t *);
#endif

View File

@ -346,6 +346,12 @@ extern int proc_dohung_task_timeout_secs(struct ctl_table *table, int write,
size_t *lenp, loff_t *ppos);
#endif
#ifdef CONFIG_LOCKUP_DETECTOR
extern int proc_dowatchdog_thresh(struct ctl_table *table, int write,
void __user *buffer,
size_t *lenp, loff_t *ppos);
#endif
/* Attach to any functions which should be ignored in wchan output. */
#define __sched __attribute__((__section__(".sched.text")))

View File

@ -944,8 +944,11 @@ config PERF_USE_VMALLOC
config PERF_EVENTS_NMI
bool
depends on PERF_EVENTS
help
Arch has support for nmi_watchdog
System hardware can generate an NMI using the perf event
subsystem. Also has support for calculating CPU cycle events
to determine how many clock cycles in a given period.
menu "Kernel Performance Events And Counters"

View File

@ -76,9 +76,8 @@ obj-$(CONFIG_GCOV_KERNEL) += gcov/
obj-$(CONFIG_AUDIT_TREE) += audit_tree.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_DETECT_SOFTLOCKUP) += softlockup.o
obj-$(CONFIG_NMI_WATCHDOG) += nmi_watchdog.o
obj-$(CONFIG_DETECT_HUNG_TASK) += hung_task.o
obj-$(CONFIG_LOCKUP_DETECTOR) += watchdog.o
obj-$(CONFIG_GENERIC_HARDIRQS) += irq/
obj-$(CONFIG_SECCOMP) += seccomp.o
obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o

View File

@ -74,7 +74,7 @@
#include <scsi/sg.h>
#endif
#ifdef CONFIG_NMI_WATCHDOG
#ifdef CONFIG_LOCKUP_DETECTOR
#include <linux/nmi.h>
#endif
@ -686,16 +686,25 @@ static struct ctl_table kern_table[] = {
.mode = 0444,
.proc_handler = proc_dointvec,
},
#if defined(CONFIG_NMI_WATCHDOG)
#if defined(CONFIG_LOCKUP_DETECTOR)
{
.procname = "nmi_watchdog",
.data = &nmi_watchdog_enabled,
.procname = "watchdog",
.data = &watchdog_enabled,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = proc_nmi_enabled,
.proc_handler = proc_dowatchdog_enabled,
},
{
.procname = "watchdog_thresh",
.data = &softlockup_thresh,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dowatchdog_thresh,
.extra1 = &neg_one,
.extra2 = &sixty,
},
#endif
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86) && !defined(CONFIG_NMI_WATCHDOG)
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86) && !defined(CONFIG_LOCKUP_DETECTOR)
{
.procname = "unknown_nmi_panic",
.data = &unknown_nmi_panic,

592
kernel/watchdog.c Normal file
View File

@ -0,0 +1,592 @@
/*
* Detect hard and soft lockups on a system
*
* started by Don Zickus, Copyright (C) 2010 Red Hat, Inc.
*
* this code detects hard lockups: incidents in where on a CPU
* the kernel does not respond to anything except NMI.
*
* Note: Most of this code is borrowed heavily from softlockup.c,
* so thanks to Ingo for the initial implementation.
* Some chunks also taken from arch/x86/kernel/apic/nmi.c, thanks
* to those contributors as well.
*/
#include <linux/mm.h>
#include <linux/cpu.h>
#include <linux/nmi.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/freezer.h>
#include <linux/kthread.h>
#include <linux/lockdep.h>
#include <linux/notifier.h>
#include <linux/module.h>
#include <linux/sysctl.h>
#include <asm/irq_regs.h>
#include <linux/perf_event.h>
int watchdog_enabled;
int __read_mostly softlockup_thresh = 60;
static DEFINE_PER_CPU(unsigned long, watchdog_touch_ts);
static DEFINE_PER_CPU(struct task_struct *, softlockup_watchdog);
static DEFINE_PER_CPU(struct hrtimer, watchdog_hrtimer);
static DEFINE_PER_CPU(bool, softlockup_touch_sync);
static DEFINE_PER_CPU(bool, hard_watchdog_warn);
static DEFINE_PER_CPU(bool, soft_watchdog_warn);
#ifdef CONFIG_PERF_EVENTS_NMI
static DEFINE_PER_CPU(unsigned long, hrtimer_interrupts);
static DEFINE_PER_CPU(unsigned long, hrtimer_interrupts_saved);
static DEFINE_PER_CPU(struct perf_event *, watchdog_ev);
#endif
static int __read_mostly did_panic;
static int __initdata no_watchdog;
/* boot commands */
/*
* Should we panic when a soft-lockup or hard-lockup occurs:
*/
#ifdef CONFIG_PERF_EVENTS_NMI
static int hardlockup_panic;
static int __init hardlockup_panic_setup(char *str)
{
if (!strncmp(str, "panic", 5))
hardlockup_panic = 1;
return 1;
}
__setup("nmi_watchdog=", hardlockup_panic_setup);
#endif
unsigned int __read_mostly softlockup_panic =
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE;
static int __init softlockup_panic_setup(char *str)
{
softlockup_panic = simple_strtoul(str, NULL, 0);
return 1;
}
__setup("softlockup_panic=", softlockup_panic_setup);
static int __init nowatchdog_setup(char *str)
{
no_watchdog = 1;
return 1;
}
__setup("nowatchdog", nowatchdog_setup);
/* deprecated */
static int __init nosoftlockup_setup(char *str)
{
no_watchdog = 1;
return 1;
}
__setup("nosoftlockup", nosoftlockup_setup);
/* */
/*
* Returns seconds, approximately. We don't need nanosecond
* resolution, and we don't need to waste time with a big divide when
* 2^30ns == 1.074s.
*/
static unsigned long get_timestamp(int this_cpu)
{
return cpu_clock(this_cpu) >> 30LL; /* 2^30 ~= 10^9 */
}
static unsigned long get_sample_period(void)
{
/*
* convert softlockup_thresh from seconds to ns
* the divide by 5 is to give hrtimer 5 chances to
* increment before the hardlockup detector generates
* a warning
*/
return softlockup_thresh / 5 * NSEC_PER_SEC;
}
/* Commands for resetting the watchdog */
static void __touch_watchdog(void)
{
int this_cpu = raw_smp_processor_id();
__get_cpu_var(watchdog_touch_ts) = get_timestamp(this_cpu);
}
void touch_watchdog(void)
{
__get_cpu_var(watchdog_touch_ts) = 0;
}
EXPORT_SYMBOL(touch_watchdog);
void touch_all_watchdog(void)
{
int cpu;
/*
* this is done lockless
* do we care if a 0 races with a timestamp?
* all it means is the softlock check starts one cycle later
*/
for_each_online_cpu(cpu)
per_cpu(watchdog_touch_ts, cpu) = 0;
}
void touch_nmi_watchdog(void)
{
touch_watchdog();
}
EXPORT_SYMBOL(touch_nmi_watchdog);
void touch_all_nmi_watchdog(void)
{
touch_all_watchdog();
}
void touch_softlockup_watchdog(void)
{
touch_watchdog();
}
void touch_all_softlockup_watchdogs(void)
{
touch_all_watchdog();
}
void touch_softlockup_watchdog_sync(void)
{
__raw_get_cpu_var(softlockup_touch_sync) = true;
__raw_get_cpu_var(watchdog_touch_ts) = 0;
}
void softlockup_tick(void)
{
}
#ifdef CONFIG_PERF_EVENTS_NMI
/* watchdog detector functions */
static int is_hardlockup(int cpu)
{
unsigned long hrint = per_cpu(hrtimer_interrupts, cpu);
if (per_cpu(hrtimer_interrupts_saved, cpu) == hrint)
return 1;
per_cpu(hrtimer_interrupts_saved, cpu) = hrint;
return 0;
}
#endif
static int is_softlockup(unsigned long touch_ts, int cpu)
{
unsigned long now = get_timestamp(cpu);
/* Warn about unreasonable delays: */
if (time_after(now, touch_ts + softlockup_thresh))
return now - touch_ts;
return 0;
}
static int
watchdog_panic(struct notifier_block *this, unsigned long event, void *ptr)
{
did_panic = 1;
return NOTIFY_DONE;
}
static struct notifier_block panic_block = {
.notifier_call = watchdog_panic,
};
#ifdef CONFIG_PERF_EVENTS_NMI
static struct perf_event_attr wd_hw_attr = {
.type = PERF_TYPE_HARDWARE,
.config = PERF_COUNT_HW_CPU_CYCLES,
.size = sizeof(struct perf_event_attr),
.pinned = 1,
.disabled = 1,
};
/* Callback function for perf event subsystem */
void watchdog_overflow_callback(struct perf_event *event, int nmi,
struct perf_sample_data *data,
struct pt_regs *regs)
{
int this_cpu = smp_processor_id();
unsigned long touch_ts = per_cpu(watchdog_touch_ts, this_cpu);
if (touch_ts == 0) {
__touch_watchdog();
return;
}
/* check for a hardlockup
* This is done by making sure our timer interrupt
* is incrementing. The timer interrupt should have
* fired multiple times before we overflow'd. If it hasn't
* then this is a good indication the cpu is stuck
*/
if (is_hardlockup(this_cpu)) {
/* only print hardlockups once */
if (__get_cpu_var(hard_watchdog_warn) == true)
return;
if (hardlockup_panic)
panic("Watchdog detected hard LOCKUP on cpu %d", this_cpu);
else
WARN(1, "Watchdog detected hard LOCKUP on cpu %d", this_cpu);
__get_cpu_var(hard_watchdog_warn) = true;
return;
}
__get_cpu_var(hard_watchdog_warn) = false;
return;
}
static void watchdog_interrupt_count(void)
{
__get_cpu_var(hrtimer_interrupts)++;
}
#else
static inline void watchdog_interrupt_count(void) { return; }
#endif /* CONFIG_PERF_EVENTS_NMI */
/* watchdog kicker functions */
static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer)
{
int this_cpu = smp_processor_id();
unsigned long touch_ts = __get_cpu_var(watchdog_touch_ts);
struct pt_regs *regs = get_irq_regs();
int duration;
/* kick the hardlockup detector */
watchdog_interrupt_count();
/* kick the softlockup detector */
wake_up_process(__get_cpu_var(softlockup_watchdog));
/* .. and repeat */
hrtimer_forward_now(hrtimer, ns_to_ktime(get_sample_period()));
if (touch_ts == 0) {
if (unlikely(per_cpu(softlockup_touch_sync, this_cpu))) {
/*
* If the time stamp was touched atomically
* make sure the scheduler tick is up to date.
*/
per_cpu(softlockup_touch_sync, this_cpu) = false;
sched_clock_tick();
}
__touch_watchdog();
return HRTIMER_RESTART;
}
/* check for a softlockup
* This is done by making sure a high priority task is
* being scheduled. The task touches the watchdog to
* indicate it is getting cpu time. If it hasn't then
* this is a good indication some task is hogging the cpu
*/
duration = is_softlockup(touch_ts, this_cpu);
if (unlikely(duration)) {
/* only warn once */
if (__get_cpu_var(soft_watchdog_warn) == true)
return HRTIMER_RESTART;
printk(KERN_ERR "BUG: soft lockup - CPU#%d stuck for %us! [%s:%d]\n",
this_cpu, duration,
current->comm, task_pid_nr(current));
print_modules();
print_irqtrace_events(current);
if (regs)
show_regs(regs);
else
dump_stack();
if (softlockup_panic)
panic("softlockup: hung tasks");
__get_cpu_var(soft_watchdog_warn) = true;
} else
__get_cpu_var(soft_watchdog_warn) = false;
return HRTIMER_RESTART;
}
/*
* The watchdog thread - touches the timestamp.
*/
static int watchdog(void *__bind_cpu)
{
struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 };
struct hrtimer *hrtimer = &per_cpu(watchdog_hrtimer, (unsigned long)__bind_cpu);
sched_setscheduler(current, SCHED_FIFO, &param);
/* initialize timestamp */
__touch_watchdog();
/* kick off the timer for the hardlockup detector */
/* done here because hrtimer_start can only pin to smp_processor_id() */
hrtimer_start(hrtimer, ns_to_ktime(get_sample_period()),
HRTIMER_MODE_REL_PINNED);
set_current_state(TASK_INTERRUPTIBLE);
/*
* Run briefly once per second to reset the softlockup timestamp.
* If this gets delayed for more than 60 seconds then the
* debug-printout triggers in softlockup_tick().
*/
while (!kthread_should_stop()) {
__touch_watchdog();
schedule();
if (kthread_should_stop())
break;
set_current_state(TASK_INTERRUPTIBLE);
}
__set_current_state(TASK_RUNNING);
return 0;
}
#ifdef CONFIG_PERF_EVENTS_NMI
static int watchdog_nmi_enable(int cpu)
{
struct perf_event_attr *wd_attr;
struct perf_event *event = per_cpu(watchdog_ev, cpu);
/* is it already setup and enabled? */
if (event && event->state > PERF_EVENT_STATE_OFF)
goto out;
/* it is setup but not enabled */
if (event != NULL)
goto out_enable;
/* Try to register using hardware perf events */
wd_attr = &wd_hw_attr;
wd_attr->sample_period = hw_nmi_get_sample_period();
event = perf_event_create_kernel_counter(wd_attr, cpu, -1, watchdog_overflow_callback);
if (!IS_ERR(event)) {
printk(KERN_INFO "NMI watchdog enabled, takes one hw-pmu counter.\n");
goto out_save;
}
printk(KERN_ERR "NMI watchdog failed to create perf event on cpu%i: %p\n", cpu, event);
return -1;
/* success path */
out_save:
per_cpu(watchdog_ev, cpu) = event;
out_enable:
perf_event_enable(per_cpu(watchdog_ev, cpu));
out:
return 0;
}
static void watchdog_nmi_disable(int cpu)
{
struct perf_event *event = per_cpu(watchdog_ev, cpu);
if (event) {
perf_event_disable(event);
per_cpu(watchdog_ev, cpu) = NULL;
/* should be in cleanup, but blocks oprofile */
perf_event_release_kernel(event);
}
return;
}
#else
static int watchdog_nmi_enable(int cpu) { return 0; }
static void watchdog_nmi_disable(int cpu) { return; }
#endif /* CONFIG_PERF_EVENTS_NMI */
/* prepare/enable/disable routines */
static int watchdog_prepare_cpu(int cpu)
{
struct hrtimer *hrtimer = &per_cpu(watchdog_hrtimer, cpu);
WARN_ON(per_cpu(softlockup_watchdog, cpu));
hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
hrtimer->function = watchdog_timer_fn;
return 0;
}
static int watchdog_enable(int cpu)
{
struct task_struct *p = per_cpu(softlockup_watchdog, cpu);
/* enable the perf event */
if (watchdog_nmi_enable(cpu) != 0)
return -1;
/* create the watchdog thread */
if (!p) {
p = kthread_create(watchdog, (void *)(unsigned long)cpu, "watchdog/%d", cpu);
if (IS_ERR(p)) {
printk(KERN_ERR "softlockup watchdog for %i failed\n", cpu);
return -1;
}
kthread_bind(p, cpu);
per_cpu(watchdog_touch_ts, cpu) = 0;
per_cpu(softlockup_watchdog, cpu) = p;
wake_up_process(p);
}
return 0;
}
static void watchdog_disable(int cpu)
{
struct task_struct *p = per_cpu(softlockup_watchdog, cpu);
struct hrtimer *hrtimer = &per_cpu(watchdog_hrtimer, cpu);
/*
* cancel the timer first to stop incrementing the stats
* and waking up the kthread
*/
hrtimer_cancel(hrtimer);
/* disable the perf event */
watchdog_nmi_disable(cpu);
/* stop the watchdog thread */
if (p) {
per_cpu(softlockup_watchdog, cpu) = NULL;
kthread_stop(p);
}
/* if any cpu succeeds, watchdog is considered enabled for the system */
watchdog_enabled = 1;
}
static void watchdog_enable_all_cpus(void)
{
int cpu;
int result;
for_each_online_cpu(cpu)
result += watchdog_enable(cpu);
if (result)
printk(KERN_ERR "watchdog: failed to be enabled on some cpus\n");
}
static void watchdog_disable_all_cpus(void)
{
int cpu;
for_each_online_cpu(cpu)
watchdog_disable(cpu);
/* if all watchdogs are disabled, then they are disabled for the system */
watchdog_enabled = 0;
}
/* sysctl functions */
#ifdef CONFIG_SYSCTL
/*
* proc handler for /proc/sys/kernel/nmi_watchdog
*/
int proc_dowatchdog_enabled(struct ctl_table *table, int write,
void __user *buffer, size_t *length, loff_t *ppos)
{
proc_dointvec(table, write, buffer, length, ppos);
if (watchdog_enabled)
watchdog_enable_all_cpus();
else
watchdog_disable_all_cpus();
return 0;
}
int proc_dowatchdog_thresh(struct ctl_table *table, int write,
void __user *buffer,
size_t *lenp, loff_t *ppos)
{
return proc_dointvec_minmax(table, write, buffer, lenp, ppos);
}
/* stub functions */
int proc_dosoftlockup_thresh(struct ctl_table *table, int write,
void __user *buffer,
size_t *lenp, loff_t *ppos)
{
return proc_dowatchdog_thresh(table, write, buffer, lenp, ppos);
}
/* end of stub functions */
#endif /* CONFIG_SYSCTL */
/*
* Create/destroy watchdog threads as CPUs come and go:
*/
static int __cpuinit
cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
{
int hotcpu = (unsigned long)hcpu;
switch (action) {
case CPU_UP_PREPARE:
case CPU_UP_PREPARE_FROZEN:
if (watchdog_prepare_cpu(hotcpu))
return NOTIFY_BAD;
break;
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
if (watchdog_enable(hotcpu))
return NOTIFY_BAD;
break;
#ifdef CONFIG_HOTPLUG_CPU
case CPU_UP_CANCELED:
case CPU_UP_CANCELED_FROZEN:
watchdog_disable(hotcpu);
break;
case CPU_DEAD:
case CPU_DEAD_FROZEN:
watchdog_disable(hotcpu);
break;
#endif /* CONFIG_HOTPLUG_CPU */
}
return NOTIFY_OK;
}
static struct notifier_block __cpuinitdata cpu_nfb = {
.notifier_call = cpu_callback
};
static int __init spawn_watchdog_task(void)
{
void *cpu = (void *)(long)smp_processor_id();
int err;
if (no_watchdog)
return 0;
err = cpu_callback(&cpu_nfb, CPU_UP_PREPARE, cpu);
WARN_ON(err == NOTIFY_BAD);
cpu_callback(&cpu_nfb, CPU_ONLINE, cpu);
register_cpu_notifier(&cpu_nfb);
atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
return 0;
}
early_initcall(spawn_watchdog_task);

View File

@ -153,7 +153,7 @@ config DEBUG_SHIRQ
points; some don't and need to be caught.
config DETECT_SOFTLOCKUP
bool "Detect Soft Lockups"
bool
depends on DEBUG_KERNEL && !S390
default y
help
@ -171,17 +171,27 @@ config DETECT_SOFTLOCKUP
can be detected via the NMI-watchdog, on platforms that
support it.)
config NMI_WATCHDOG
bool "Detect Hard Lockups with an NMI Watchdog"
depends on DEBUG_KERNEL && PERF_EVENTS && PERF_EVENTS_NMI
config LOCKUP_DETECTOR
bool "Detect Hard and Soft Lockups"
depends on DEBUG_KERNEL
default DETECT_SOFTLOCKUP
help
Say Y here to enable the kernel to use the NMI as a watchdog
to detect hard lockups. This is useful when a cpu hangs for no
reason but can still respond to NMIs. A backtrace is displayed
for reviewing and reporting.
Say Y here to enable the kernel to act as a watchdog to detect
hard and soft lockups.
The overhead should be minimal, just an extra NMI every few
seconds.
Softlockups are bugs that cause the kernel to loop in kernel
mode for more than 60 seconds, without giving other tasks a
chance to run. The current stack trace is displayed upon
detection and the system will stay locked up.
Hardlockups are bugs that cause the CPU to loop in kernel mode
for more than 60 seconds, without letting other interrupts have a
chance to run. The current stack trace is displayed upon detection
and the system will stay locked up.
The overhead should be minimal. A periodic hrtimer runs to
generate interrupts and kick the watchdog task every 10-12 seconds.
An NMI is generated every 60 seconds or so to check for hardlockups.
config BOOTPARAM_SOFTLOCKUP_PANIC
bool "Panic (Reboot) On Soft Lockups"