dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6 

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  [AVR32] Fix random segfault with preemption
  [AVR32] Don't use __builtin_xchg()
  [AVR32] ngw100 i2c-gpio tweaks
  [AVR32] Ignore a few irrelevant syscalls
  [AVR32] SMC configuration in clock cycles
  [AVR32] Drop support for redundant "keepinitrd" boot-time parm.
  [AVR32] Make dma_sync_*_for_cpu no-ops
  [AVR32] Remove unneeded 8K alignment of .text section
  [AVR32] Kill a few hardcoded constants in vmlinux.lds
  [AVR32] rename vmlinux.lds
  [AVR32] fix command line parsing in early_parse_fbmem
  [AVR32] checkstack support
  [AVR32] Wire up USBA device
  [AVR32] add multidrive support for pio driver
  [AVR32] /sys/kernel/debug/at32ap_clk
  [AVR32] Move AT32_PM_BASE definition into pm.h
This commit is contained in:
Linus Torvalds 2007-10-11 19:13:44 -07:00
parent 1ef3e36251 a7e30b8d91
commit 55982fd184
21 changed files with 448 additions and 74 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
arch/avr32/boards/atngw100/flash.c
View File

@ -15,7 +15,7 @@
#include <asm/arch/smc.h>
static struct smc_config flash_config __initdata = {
static struct smc_timing flash_timing __initdata = {
.ncs_read_setup = 0,
.nrd_setup = 40,
.ncs_write_setup = 0,
@ -28,7 +28,9 @@ static struct smc_config flash_config __initdata = {
.read_cycle = 120,
.write_cycle = 120,
};
static struct smc_config flash_config __initdata = {
.bus_width = 2,
.nrd_controlled = 1,
.nwe_controlled = 1,
@ -82,6 +84,7 @@ static int __init atngw100_flash_init(void)
{
int ret;
smc_set_timing(&flash_config, &flash_timing);
ret = smc_set_configuration(0, &flash_config);
if (ret < 0) {
printk(KERN_ERR "atngw100: failed to set NOR flash timing\n");

14
arch/avr32/boards/atngw100/setup.c
View File

@ -125,8 +125,11 @@ static struct platform_device ngw_gpio_leds = {
};
static struct i2c_gpio_platform_data i2c_gpio_data = {
.sda_pin = GPIO_PIN_PA(6),
.scl_pin = GPIO_PIN_PA(7),
.sda_pin = GPIO_PIN_PA(6),
.scl_pin = GPIO_PIN_PA(7),
.sda_is_open_drain = 1,
.scl_is_open_drain = 1,
.udelay = 2, /* close to 100 kHz */
};
static struct platform_device i2c_gpio_device = {
@ -154,6 +157,7 @@ static int __init atngw100_init(void)
set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
at32_add_device_usba(0, NULL);
for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
at32_select_gpio(ngw_leds[i].gpio,
@ -161,8 +165,10 @@ static int __init atngw100_init(void)
}
platform_device_register(&ngw_gpio_leds);
at32_select_gpio(i2c_gpio_data.sda_pin, 0);
at32_select_gpio(i2c_gpio_data.scl_pin, 0);
at32_select_gpio(i2c_gpio_data.sda_pin,
AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
at32_select_gpio(i2c_gpio_data.scl_pin,
AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
platform_device_register(&i2c_gpio_device);
return 0;

1
arch/avr32/boards/atstk1000/atstk1002.c
View File

@ -241,6 +241,7 @@ static int __init atstk1002_init(void)
at32_add_device_lcdc(0, &atstk1000_lcdc_data,
fbmem_start, fbmem_size);
#endif
at32_add_device_usba(0, NULL);
#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
at32_add_device_ssc(0, ATMEL_SSC_TX);
#endif

5
arch/avr32/boards/atstk1000/flash.c
View File

@ -15,7 +15,7 @@
#include <asm/arch/smc.h>
static struct smc_config flash_config __initdata = {
static struct smc_timing flash_timing __initdata = {
.ncs_read_setup = 0,
.nrd_setup = 40,
.ncs_write_setup = 0,
@ -28,7 +28,9 @@ static struct smc_config flash_config __initdata = {
.read_cycle = 120,
.write_cycle = 120,
};
static struct smc_config flash_config __initdata = {
.bus_width = 2,
.nrd_controlled = 1,
.nwe_controlled = 1,
@ -82,6 +84,7 @@ static int __init atstk1000_flash_init(void)
{
int ret;
smc_set_timing(&flash_config, &flash_timing);
ret = smc_set_configuration(0, &flash_config);
if (ret < 0) {
printk(KERN_ERR "atstk1000: failed to set NOR flash timing\n");

5
arch/avr32/kernel/Makefile
View File

@ -11,8 +11,3 @@ obj-y += signal.o sys_avr32.o process.o time.o
obj-y += init_task.o switch_to.o cpu.o
obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
obj-$(CONFIG_KPROBES) += kprobes.o
USE_STANDARD_AS_RULE := true
%.lds: %.lds.c FORCE
$(call if_changed_dep,cpp_lds_S)

26
arch/avr32/kernel/entry-avr32b.S
View File

@ -159,11 +159,18 @@ handle_vmalloc_miss:
.section .scall.text,"ax",@progbits
system_call:
#ifdef CONFIG_PREEMPT
mask_interrupts
#endif
pushm r12 /* r12_orig */
stmts --sp, r0-lr
zero_fp
mfsr r0, SYSREG_RAR_SUP
mfsr r1, SYSREG_RSR_SUP
#ifdef CONFIG_PREEMPT
unmask_interrupts
#endif
zero_fp
stm --sp, r0-r1
/* check for syscall tracing */
@ -638,6 +645,13 @@ irq_level\level:
stmts --sp,r0-lr
mfsr r8, rar_int\level
mfsr r9, rsr_int\level
#ifdef CONFIG_PREEMPT
sub r11, pc, (. - system_call)
cp.w r11, r8
breq 4f
#endif
pushm r8-r9
mov r11, sp
@ -668,6 +682,16 @@ irq_level\level:
sub sp, -4 /* ignore r12_orig */
rete
#ifdef CONFIG_PREEMPT
4: mask_interrupts
mfsr r8, rsr_int\level
sbr r8, 16
mtsr rsr_int\level, r8
ldmts sp++, r0-lr
sub sp, -4 /* ignore r12_orig */
rete
#endif
2: get_thread_info r0
ld.w r1, r0[TI_flags]
bld r1, TIF_CPU_GOING_TO_SLEEP

2
arch/avr32/kernel/setup.c
View File

@ -248,7 +248,7 @@ static int __init early_parse_fbmem(char *p)
fbmem_size = memparse(p, &p);
if (*p == '@') {
fbmem_start = memparse(p, &p);
fbmem_start = memparse(p + 1, &p);
ret = add_reserved_region(fbmem_start,
fbmem_start + fbmem_size - 1,
"Framebuffer");

9
arch/avr32/kernel/vmlinux.lds.c → arch/avr32/kernel/vmlinux.lds.S
View File

@ -9,6 +9,8 @@
*/
#define LOAD_OFFSET 0x00000000
#include <asm-generic/vmlinux.lds.h>
#include <asm/cache.h>
#include <asm/thread_info.h>
OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
OUTPUT_ARCH(avr32)
@ -58,11 +60,10 @@ SECTIONS
*(.init.ramfs)
__initramfs_end = .;
#endif
. = ALIGN(4096);
. = ALIGN(PAGE_SIZE);
__init_end = .;
}
. = ALIGN(8192);
.text : AT(ADDR(.text) - LOAD_OFFSET) {
_evba = .;
_text = .;
@ -96,7 +97,7 @@ SECTIONS
RODATA
. = ALIGN(8192);
. = ALIGN(THREAD_SIZE);
.data : AT(ADDR(.data) - LOAD_OFFSET) {
_data = .;
@ -107,7 +108,7 @@ SECTIONS
*(.data.init_task)
/* Then, the cacheline aligned data */
. = ALIGN(32);
. = ALIGN(L1_CACHE_BYTES);
*(.data.cacheline_aligned)
/* And the rest... */

74
arch/avr32/mach-at32ap/at32ap7000.c
View File

@ -25,12 +25,6 @@
#include "pio.h"
#include "pm.h"
/*
* We can reduce the code size a bit by using a constant here. Since
* this file is completely chip-specific, it's safe to not use
* ioremap. Generic drivers should of course never do this.
*/
#define AT32_PM_BASE 0xfff00000
#define PBMEM(base) \
{ \
@ -1167,6 +1161,72 @@ at32_add_device_ssc(unsigned int id, unsigned int flags)
return pdev;
}
/* --------------------------------------------------------------------
* USB Device Controller
* -------------------------------------------------------------------- */
static struct resource usba0_resource[] __initdata = {
{
.start = 0xff300000,
.end = 0xff3fffff,
.flags = IORESOURCE_MEM,
}, {
.start = 0xfff03000,
.end = 0xfff033ff,
.flags = IORESOURCE_MEM,
},
IRQ(31),
};
static struct clk usba0_pclk = {
.name = "pclk",
.parent = &pbb_clk,
.mode = pbb_clk_mode,
.get_rate = pbb_clk_get_rate,
.index = 12,
};
static struct clk usba0_hclk = {
.name = "hclk",
.parent = &hsb_clk,
.mode = hsb_clk_mode,
.get_rate = hsb_clk_get_rate,
.index = 6,
};
struct platform_device *__init
at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
{
struct platform_device *pdev;
if (id != 0)
return NULL;
pdev = platform_device_alloc("atmel_usba_udc", 0);
if (!pdev)
return NULL;
if (platform_device_add_resources(pdev, usba0_resource,
ARRAY_SIZE(usba0_resource)))
goto out_free_pdev;
if (data) {
if (platform_device_add_data(pdev, data, sizeof(*data)))
goto out_free_pdev;
if (data->vbus_pin != GPIO_PIN_NONE)
at32_select_gpio(data->vbus_pin, 0);
}
usba0_pclk.dev = &pdev->dev;
usba0_hclk.dev = &pdev->dev;
platform_device_add(pdev);
return pdev;
out_free_pdev:
platform_device_put(pdev);
return NULL;
}
/* --------------------------------------------------------------------
* GCLK
* -------------------------------------------------------------------- */
@ -1252,6 +1312,8 @@ struct clk *at32_clock_list[] = {
&ssc0_pclk,
&ssc1_pclk,
&ssc2_pclk,
&usba0_hclk,
&usba0_pclk,
&gclk0,
&gclk1,
&gclk2,

116
arch/avr32/mach-at32ap/clock.c
View File

@ -150,3 +150,119 @@ struct clk *clk_get_parent(struct clk *clk)
return clk->parent;
}
EXPORT_SYMBOL(clk_get_parent);
#ifdef CONFIG_DEBUG_FS
/* /sys/kernel/debug/at32ap_clk */
#include <linux/io.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include "pm.h"
#define NEST_DELTA 2
#define NEST_MAX 6
struct clkinf {
struct seq_file *s;
unsigned nest;
};
static void
dump_clock(struct clk *parent, struct clkinf *r)
{
unsigned nest = r->nest;
char buf[16 + NEST_MAX];
struct clk *clk;
unsigned i;
/* skip clocks coupled to devices that aren't registered */
if (parent->dev && !parent->dev->bus_id[0] && !parent->users)
return;
/* <nest spaces> name <pad to end> */
memset(buf, ' ', sizeof(buf) - 1);
buf[sizeof(buf) - 1] = 0;
i = strlen(parent->name);
memcpy(buf + nest, parent->name,
min(i, (unsigned)(sizeof(buf) - 1 - nest)));
seq_printf(r->s, "%s%c users=%2d %-3s %9ld Hz",
buf, parent->set_parent ? '*' : ' ',
parent->users,
parent->users ? "on" : "off", /* NOTE: not-paranoid!! */
clk_get_rate(parent));
if (parent->dev)
seq_printf(r->s, ", for %s", parent->dev->bus_id);
seq_printf(r->s, "\n");
/* cost of this scan is small, but not linear... */
r->nest = nest + NEST_DELTA;
for (i = 3; i < at32_nr_clocks; i++) {
clk = at32_clock_list[i];
if (clk->parent == parent)
dump_clock(clk, r);
}
r->nest = nest;
}
static int clk_show(struct seq_file *s, void *unused)
{
struct clkinf r;
int i;
/* show all the power manager registers */
seq_printf(s, "MCCTRL = %8x\n", pm_readl(MCCTRL));
seq_printf(s, "CKSEL = %8x\n", pm_readl(CKSEL));
seq_printf(s, "CPUMASK = %8x\n", pm_readl(CPU_MASK));
seq_printf(s, "HSBMASK = %8x\n", pm_readl(HSB_MASK));
seq_printf(s, "PBAMASK = %8x\n", pm_readl(PBA_MASK));
seq_printf(s, "PBBMASK = %8x\n", pm_readl(PBB_MASK));
seq_printf(s, "PLL0 = %8x\n", pm_readl(PLL0));
seq_printf(s, "PLL1 = %8x\n", pm_readl(PLL1));
seq_printf(s, "IMR = %8x\n", pm_readl(IMR));
for (i = 0; i < 8; i++) {
if (i == 5)
continue;
seq_printf(s, "GCCTRL%d = %8x\n", i, pm_readl(GCCTRL(i)));
}
seq_printf(s, "\n");
/* show clock tree as derived from the three oscillators
* we "know" are at the head of the list
*/
r.s = s;
r.nest = 0;
dump_clock(at32_clock_list[0], &r);
dump_clock(at32_clock_list[1], &r);
dump_clock(at32_clock_list[2], &r);
return 0;
}
static int clk_open(struct inode *inode, struct file *file)
{
return single_open(file, clk_show, NULL);
}
static const struct file_operations clk_operations = {
.open = clk_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int __init clk_debugfs_init(void)
{
(void) debugfs_create_file("at32ap_clk", S_IFREG | S_IRUGO,
NULL, NULL, &clk_operations);
return 0;
}
postcore_initcall(clk_debugfs_init);
#endif

131
arch/avr32/mach-at32ap/hsmc.c
View File

@ -29,16 +29,25 @@ struct hsmc {
static struct hsmc *hsmc;
int smc_set_configuration(int cs, const struct smc_config *config)
void smc_set_timing(struct smc_config *config,
const struct smc_timing *timing)
{
unsigned long mul;
unsigned long offset;
u32 setup, pulse, cycle, mode;
int recover;
int cycle;
if (!hsmc)
return -ENODEV;
if (cs >= NR_CHIP_SELECTS)
return -EINVAL;
unsigned long mul;
/* Reset all SMC timings */
config->ncs_read_setup = 0;
config->nrd_setup = 0;
config->ncs_write_setup = 0;
config->nwe_setup = 0;
config->ncs_read_pulse = 0;
config->nrd_pulse = 0;
config->ncs_write_pulse = 0;
config->nwe_pulse = 0;
config->read_cycle = 0;
config->write_cycle = 0;
/*
* cycles = x / T = x * f
@ -50,16 +59,102 @@ int smc_set_configuration(int cs, const struct smc_config *config)
#define ns2cyc(x) ((((x) * mul) + 65535) >> 16)
setup = (HSMC_BF(NWE_SETUP, ns2cyc(config->nwe_setup))
| HSMC_BF(NCS_WR_SETUP, ns2cyc(config->ncs_write_setup))
| HSMC_BF(NRD_SETUP, ns2cyc(config->nrd_setup))
| HSMC_BF(NCS_RD_SETUP, ns2cyc(config->ncs_read_setup)));
pulse = (HSMC_BF(NWE_PULSE, ns2cyc(config->nwe_pulse))
| HSMC_BF(NCS_WR_PULSE, ns2cyc(config->ncs_write_pulse))
| HSMC_BF(NRD_PULSE, ns2cyc(config->nrd_pulse))
| HSMC_BF(NCS_RD_PULSE, ns2cyc(config->ncs_read_pulse)));
cycle = (HSMC_BF(NWE_CYCLE, ns2cyc(config->write_cycle))
| HSMC_BF(NRD_CYCLE, ns2cyc(config->read_cycle)));
if (timing->ncs_read_setup > 0)
config->ncs_read_setup = ns2cyc(timing->ncs_read_setup);
if (timing->nrd_setup > 0)
config->nrd_setup = ns2cyc(timing->nrd_setup);
if (timing->ncs_write_setup > 0)
config->ncs_write_setup = ns2cyc(timing->ncs_write_setup);
if (timing->nwe_setup > 0)
config->nwe_setup = ns2cyc(timing->nwe_setup);
if (timing->ncs_read_pulse > 0)
config->ncs_read_pulse = ns2cyc(timing->ncs_read_pulse);
if (timing->nrd_pulse > 0)
config->nrd_pulse = ns2cyc(timing->nrd_pulse);
if (timing->ncs_write_pulse > 0)
config->ncs_write_pulse = ns2cyc(timing->ncs_write_pulse);
if (timing->nwe_pulse > 0)
config->nwe_pulse = ns2cyc(timing->nwe_pulse);
if (timing->read_cycle > 0)
config->read_cycle = ns2cyc(timing->read_cycle);
if (timing->write_cycle > 0)
config->write_cycle = ns2cyc(timing->write_cycle);
/* Extend read cycle in needed */
if (timing->ncs_read_recover > 0)
recover = ns2cyc(timing->ncs_read_recover);
else
recover = 1;
cycle = config->ncs_read_setup + config->ncs_read_pulse + recover;
if (config->read_cycle < cycle)
config->read_cycle = cycle;
/* Extend read cycle in needed */
if (timing->nrd_recover > 0)
recover = ns2cyc(timing->nrd_recover);
else
recover = 1;
cycle = config->nrd_setup + config->nrd_pulse + recover;
if (config->read_cycle < cycle)
config->read_cycle = cycle;
/* Extend write cycle in needed */
if (timing->ncs_write_recover > 0)
recover = ns2cyc(timing->ncs_write_recover);
else
recover = 1;
cycle = config->ncs_write_setup + config->ncs_write_pulse + recover;
if (config->write_cycle < cycle)
config->write_cycle = cycle;
/* Extend write cycle in needed */
if (timing->nwe_recover > 0)
recover = ns2cyc(timing->nwe_recover);
else
recover = 1;
cycle = config->nwe_setup + config->nwe_pulse + recover;
if (config->write_cycle < cycle)
config->write_cycle = cycle;
}
EXPORT_SYMBOL(smc_set_timing);
int smc_set_configuration(int cs, const struct smc_config *config)
{
unsigned long offset;
u32 setup, pulse, cycle, mode;
if (!hsmc)
return -ENODEV;
if (cs >= NR_CHIP_SELECTS)
return -EINVAL;
setup = (HSMC_BF(NWE_SETUP, config->nwe_setup)
| HSMC_BF(NCS_WR_SETUP, config->ncs_write_setup)
| HSMC_BF(NRD_SETUP, config->nrd_setup)
| HSMC_BF(NCS_RD_SETUP, config->ncs_read_setup));
pulse = (HSMC_BF(NWE_PULSE, config->nwe_pulse)
| HSMC_BF(NCS_WR_PULSE, config->ncs_write_pulse)
| HSMC_BF(NRD_PULSE, config->nrd_pulse)
| HSMC_BF(NCS_RD_PULSE, config->ncs_read_pulse));
cycle = (HSMC_BF(NWE_CYCLE, config->write_cycle)
| HSMC_BF(NRD_CYCLE, config->read_cycle));
switch (config->bus_width) {
case 1:

4
arch/avr32/mach-at32ap/pio.c
View File

@ -110,6 +110,10 @@ void __init at32_select_gpio(unsigned int pin, unsigned long flags)
pio_writel(pio, SODR, mask);
else
pio_writel(pio, CODR, mask);
if (flags & AT32_GPIOF_MULTIDRV)
pio_writel(pio, MDER, mask);
else
pio_writel(pio, MDDR, mask);
pio_writel(pio, PUDR, mask);
pio_writel(pio, OER, mask);
} else {

8
arch/avr32/mach-at32ap/pm.h
View File

@ -4,6 +4,14 @@
#ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
#define __ARCH_AVR32_MACH_AT32AP_PM_H__
/*
* We can reduce the code size a bit by using a constant here. Since
* this file is only used on AVR32 AP CPUs with segmentation enabled,
* it's safe to not use ioremap. Generic drivers should of course
* never do this.
*/
#define AT32_PM_BASE 0xfff00000
/* PM register offsets */
#define PM_MCCTRL 0x0000
#define PM_CKSEL 0x0004

12
arch/avr32/mm/init.c
View File

@ -224,19 +224,9 @@ void free_initmem(void)
#ifdef CONFIG_BLK_DEV_INITRD
static int keep_initrd;
void free_initrd_mem(unsigned long start, unsigned long end)
{
if (!keep_initrd)
free_area(start, end, "initrd");
free_area(start, end, "initrd");
}
static int __init keepinitrd_setup(char *__unused)
{
keep_initrd = 1;
return 1;
}
__setup("keepinitrd", keepinitrd_setup);
#endif

8
include/asm-avr32/arch-at32ap/board.h
View File

@ -6,6 +6,8 @@
#include <linux/types.h>
#define GPIO_PIN_NONE (-1)
/* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
void at32_add_system_devices(void);
@ -36,6 +38,12 @@ struct platform_device *
at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
unsigned long fbmem_start, unsigned long fbmem_len);
struct usba_platform_data {
int vbus_pin;
};
struct platform_device *
at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
/* depending on what's hooked up, not all SSC pins will be used */
#define ATMEL_SSC_TK 0x01
#define ATMEL_SSC_TF 0x02

1
include/asm-avr32/arch-at32ap/portmux.h
View File

@ -19,6 +19,7 @@
#define AT32_GPIOF_OUTPUT 0x00000002 /* (OUT) Enable output driver */
#define AT32_GPIOF_HIGH 0x00000004 /* (OUT) Set output high */
#define AT32_GPIOF_DEGLITCH 0x00000008 /* (IN) Filter glitches */
#define AT32_GPIOF_MULTIDRV 0x00000010 /* Enable multidriver option */
void at32_select_periph(unsigned int pin, unsigned int periph,
unsigned long flags);

53
include/asm-avr32/arch-at32ap/smc.h
View File

@ -15,22 +15,50 @@
/*
* All timing parameters are in nanoseconds.
*/
struct smc_config {
struct smc_timing {
/* Delay from address valid to assertion of given strobe */
u16 ncs_read_setup;
u16 nrd_setup;
u16 ncs_write_setup;
u16 nwe_setup;
int ncs_read_setup;
int nrd_setup;
int ncs_write_setup;
int nwe_setup;
/* Pulse length of given strobe */
u16 ncs_read_pulse;
u16 nrd_pulse;
u16 ncs_write_pulse;
u16 nwe_pulse;
int ncs_read_pulse;
int nrd_pulse;
int ncs_write_pulse;
int nwe_pulse;
/* Total cycle length of given operation */
u16 read_cycle;
u16 write_cycle;
int read_cycle;
int write_cycle;
/* Minimal recovery times, will extend cycle if needed */
int ncs_read_recover;
int nrd_recover;
int ncs_write_recover;
int nwe_recover;
};
/*
* All timing parameters are in clock cycles.
*/
struct smc_config {
/* Delay from address valid to assertion of given strobe */
u8 ncs_read_setup;
u8 nrd_setup;
u8 ncs_write_setup;
u8 nwe_setup;
/* Pulse length of given strobe */
u8 ncs_read_pulse;
u8 nrd_pulse;
u8 ncs_write_pulse;
u8 nwe_pulse;
/* Total cycle length of given operation */
u8 read_cycle;
u8 write_cycle;
/* Bus width in bytes */
u8 bus_width;
@ -76,6 +104,9 @@ struct smc_config {
unsigned int tdf_mode:1;
};
extern void smc_set_timing(struct smc_config *config,
const struct smc_timing *timing);
extern int smc_set_configuration(int cs, const struct smc_config *config);
extern struct smc_config *smc_get_configuration(int cs);

17
include/asm-avr32/dma-mapping.h
View File

@ -264,7 +264,11 @@ static inline void
dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
size_t size, enum dma_data_direction direction)
{
dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction);
/*
* No need to do anything since the CPU isn't supposed to
* touch this memory after we flushed it at mapping- or
* sync-for-device time.
*/
}
static inline void
@ -309,12 +313,11 @@ static inline void
dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
int nents, enum dma_data_direction direction)
{
int i;
for (i = 0; i < nents; i++) {
dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset,
sg[i].length, direction);
}
/*
* No need to do anything since the CPU isn't supposed to
* touch this memory after we flushed it at mapping- or
* sync-for-device time.
*/
}
static inline void

13
include/asm-avr32/system.h
View File

@ -73,11 +73,16 @@ extern struct task_struct *__switch_to(struct task_struct *,
extern void __xchg_called_with_bad_pointer(void);
#ifdef __CHECKER__
extern unsigned long __builtin_xchg(void *ptr, unsigned long x);
#endif
static inline unsigned long xchg_u32(u32 val, volatile u32 *m)
{
u32 ret;
#define xchg_u32(val, m) __builtin_xchg((void *)m, val)
asm volatile("xchg %[ret], %[m], %[val]"
: [ret] "=&r"(ret), "=m"(*m)
: "m"(*m), [m] "r"(m), [val] "r"(val)
: "memory");
return ret;
}
static inline unsigned long __xchg(unsigned long x,
volatile void *ptr,

13
include/asm-avr32/unistd.h
View File

@ -303,6 +303,19 @@
#ifdef __KERNEL__
#define NR_syscalls 282
/* Old stuff */
#define __IGNORE_uselib
#define __IGNORE_mmap
/* NUMA stuff */
#define __IGNORE_mbind
#define __IGNORE_get_mempolicy
#define __IGNORE_set_mempolicy
#define __IGNORE_migrate_pages
#define __IGNORE_move_pages
/* SMP stuff */
#define __IGNORE_getcpu
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_STAT64

5
scripts/checkstack.pl
View File

@ -12,6 +12,7 @@
# sh64 port by Paul Mundt
# Random bits by Matt Mackall <mpm@selenic.com>
# M68k port by Geert Uytterhoeven and Andreas Schwab
# AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
#
# Usage:
# objdump -d vmlinux | stackcheck.pl [arch]
@ -37,6 +38,10 @@ my (@stack, $re, $x, $xs);
if ($arch eq 'arm') {
#c0008ffc: e24dd064 sub sp, sp, #100 ; 0x64
$re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o;
} elsif ($arch eq 'avr32') {
#8000008a: 20 1d sub sp,4
#80000ca8: fa cd 05 b0 sub sp,sp,1456
$re = qr/^.*sub.*sp.*,([0-9]{1,8})/o;
} elsif ($arch =~ /^i[3456]86$/) {
#c0105234: 81 ec ac 05 00 00 sub $0x5ac,%esp
$re = qr/^.*[as][du][db] \$(0x$x{1,8}),\%esp$/o;