dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

Merge remote-tracking branch 'jwb/next' into next

This commit is contained in:
Benjamin Herrenschmidt 2011-07-22 13:16:41 +10:00
parent f7723f0eaf a8e616b9a4
commit 4b575f3e8a
12 changed files with 186 additions and 85 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
MAINTAINERS
View File

@ -3876,7 +3876,7 @@ F: arch/powerpc/platforms/512x/
F: arch/powerpc/platforms/52xx/
LINUX FOR POWERPC EMBEDDED PPC4XX
M: Josh Boyer <jwboyer@linux.vnet.ibm.com>
M: Josh Boyer <jwboyer@gmail.com>
M: Matt Porter <mporter@kernel.crashing.org>
W: http://www.penguinppc.org/
L: linuxppc-dev@lists.ozlabs.org

2
arch/powerpc/Kconfig
View File

@ -842,7 +842,7 @@ config LOWMEM_CAM_NUM
config RELOCATABLE
bool "Build a relocatable kernel (EXPERIMENTAL)"
depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && FSL_BOOKE
depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && (FSL_BOOKE || PPC_47x)
help
This builds a kernel image that is capable of running at the
location the kernel is loaded at (some alignment restrictions may

4
arch/powerpc/boot/dts/taishan.dts
View File

@ -337,7 +337,7 @@
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
phy-mode = "rgmii";
phy-map = <0x00000001>;
phy-address = <1>;
rgmii-device = <&RGMII0>;
rgmii-channel = <0>;
zmii-device = <&ZMII0>;
@ -361,7 +361,7 @@
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
phy-mode = "rgmii";
phy-map = <0x00000003>;
phy-address = <3>;
rgmii-device = <&RGMII0>;
rgmii-channel = <1>;
zmii-device = <&ZMII0>;

23
arch/powerpc/boot/treeboot-iss4xx.c
View File

@ -34,9 +34,29 @@
BSS_STACK(4096);
static u32 ibm4xx_memstart;
static void iss_4xx_fixups(void)
{
ibm4xx_sdram_fixup_memsize();
void *memory;
u32 reg[3];
memory = finddevice("/memory");
if (!memory)
fatal("Can't find memory node\n");
/* This assumes #address-cells = 2, #size-cells =1 and that */
getprop(memory, "reg", reg, sizeof(reg));
if (reg[2])
/* If the device tree specifies the memory range, use it */
ibm4xx_memstart = reg[1];
else
/* othersize, read it from the SDRAM controller */
ibm4xx_sdram_fixup_memsize();
}
static void *iss_4xx_vmlinux_alloc(unsigned long size)
{
return (void *)ibm4xx_memstart;
}
#define SPRN_PIR 0x11E /* Processor Indentification Register */
@ -48,6 +68,7 @@ void platform_init(void)
simple_alloc_init(_end, avail_ram, 128, 64);
platform_ops.fixups = iss_4xx_fixups;
platform_ops.vmlinux_alloc = iss_4xx_vmlinux_alloc;
platform_ops.exit = ibm44x_dbcr_reset;
pir_reg = mfspr(SPRN_PIR);
fdt_set_boot_cpuid_phys(_dtb_start, pir_reg);

6
arch/powerpc/configs/44x/iss476-smp_defconfig
View File

@ -3,8 +3,8 @@ CONFIG_SMP=y
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_SPARSE_IRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
@ -21,10 +21,11 @@ CONFIG_ISS4xx=y
CONFIG_HZ_100=y
CONFIG_MATH_EMULATION=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_SPARSE_IRQ=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="root=/dev/issblk0"
# CONFIG_PCI is not set
CONFIG_ADVANCED_OPTIONS=y
CONFIG_RELOCATABLE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@ -67,7 +68,6 @@ CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_INOTIFY=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y

7
arch/powerpc/include/asm/mmu.h
View File

@ -125,9 +125,14 @@ static inline int mmu_has_feature(unsigned long feature)
return (cur_cpu_spec->mmu_features & feature);
}
static inline void mmu_clear_feature(unsigned long feature)
{
cur_cpu_spec->mmu_features &= ~feature;
}
extern unsigned int __start___mmu_ftr_fixup, __stop___mmu_ftr_fixup;
/* MMU initialization (64-bit only fo now) */
/* MMU initialization */
extern void early_init_mmu(void);
extern void early_init_mmu_secondary(void);

42
arch/powerpc/kernel/head_44x.S
View File

@ -93,6 +93,30 @@ _ENTRY(_start);
bl early_init
#ifdef CONFIG_RELOCATABLE
/*
* r25 will contain RPN/ERPN for the start address of memory
*
* Add the difference between KERNELBASE and PAGE_OFFSET to the
* start of physical memory to get kernstart_addr.
*/
lis r3,kernstart_addr@ha
la r3,kernstart_addr@l(r3)
lis r4,KERNELBASE@h
ori r4,r4,KERNELBASE@l
lis r5,PAGE_OFFSET@h
ori r5,r5,PAGE_OFFSET@l
subf r4,r5,r4
rlwinm r6,r25,0,28,31 /* ERPN */
rlwinm r7,r25,0,0,3 /* RPN - assuming 256 MB page size */
add r7,r7,r4
stw r6,0(r3)
stw r7,4(r3)
#endif
/*
* Decide what sort of machine this is and initialize the MMU.
*/
@ -1001,9 +1025,6 @@ clear_utlb_entry:
lis r3,PAGE_OFFSET@h
ori r3,r3,PAGE_OFFSET@l
/* Kernel is at the base of RAM */
li r4, 0 /* Load the kernel physical address */
/* Load the kernel PID = 0 */
li r0,0
mtspr SPRN_PID,r0
@ -1013,9 +1034,8 @@ clear_utlb_entry:
clrrwi r3,r3,12 /* Mask off the effective page number */
ori r3,r3,PPC47x_TLB0_VALID | PPC47x_TLB0_256M
/* Word 1 */
clrrwi r4,r4,12 /* Mask off the real page number */
/* ERPN is 0 for first 4GB page */
/* Word 1 - use r25. RPN is the same as the original entry */
/* Word 2 */
li r5,0
ori r5,r5,PPC47x_TLB2_S_RWX
@ -1026,7 +1046,7 @@ clear_utlb_entry:
/* We write to way 0 and bolted 0 */
lis r0,0x8800
tlbwe r3,r0,0
tlbwe r4,r0,1
tlbwe r25,r0,1
tlbwe r5,r0,2
/*
@ -1124,7 +1144,13 @@ head_start_common:
lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */
mtspr SPRN_IVPR,r4
addis r22,r22,KERNELBASE@h
/*
* If the kernel was loaded at a non-zero 256 MB page, we need to
* mask off the most significant 4 bits to get the relative address
* from the start of physical memory
*/
rlwinm r22,r22,0,4,31
addis r22,r22,PAGE_OFFSET@h
mtlr r22
isync
blr

2
arch/powerpc/kernel/setup_32.c
View File

@ -127,6 +127,8 @@ notrace void __init machine_init(unsigned long dt_ptr)
/* Do some early initialization based on the flat device tree */
early_init_devtree(__va(dt_ptr));
early_init_mmu();
probe_machine();
setup_kdump_trampoline();

13
arch/powerpc/mm/44x_mmu.c
View File

@ -186,10 +186,11 @@ void __init MMU_init_hw(void)
unsigned long __init mmu_mapin_ram(unsigned long top)
{
unsigned long addr;
unsigned long memstart = memstart_addr & ~(PPC_PIN_SIZE - 1);
/* Pin in enough TLBs to cover any lowmem not covered by the
* initial 256M mapping established in head_44x.S */
for (addr = PPC_PIN_SIZE; addr < lowmem_end_addr;
for (addr = memstart + PPC_PIN_SIZE; addr < lowmem_end_addr;
addr += PPC_PIN_SIZE) {
if (mmu_has_feature(MMU_FTR_TYPE_47x))
ppc47x_pin_tlb(addr + PAGE_OFFSET, addr);
@ -218,19 +219,25 @@ unsigned long __init mmu_mapin_ram(unsigned long top)
void setup_initial_memory_limit(phys_addr_t first_memblock_base,
phys_addr_t first_memblock_size)
{
u64 size;
#ifndef CONFIG_RELOCATABLE
/* We don't currently support the first MEMBLOCK not mapping 0
* physical on those processors
*/
BUG_ON(first_memblock_base != 0);
#endif
/* 44x has a 256M TLB entry pinned at boot */
memblock_set_current_limit(min_t(u64, first_memblock_size, PPC_PIN_SIZE));
size = (min_t(u64, first_memblock_size, PPC_PIN_SIZE));
memblock_set_current_limit(first_memblock_base + size);
}
#ifdef CONFIG_SMP
void __cpuinit mmu_init_secondary(int cpu)
{
unsigned long addr;
unsigned long memstart = memstart_addr & ~(PPC_PIN_SIZE - 1);
/* Pin in enough TLBs to cover any lowmem not covered by the
* initial 256M mapping established in head_44x.S
@ -241,7 +248,7 @@ void __cpuinit mmu_init_secondary(int cpu)
* stack. current (r2) isn't initialized, smp_processor_id()
* will not work, current thread info isn't accessible, ...
*/
for (addr = PPC_PIN_SIZE; addr < lowmem_end_addr;
for (addr = memstart + PPC_PIN_SIZE; addr < lowmem_end_addr;
addr += PPC_PIN_SIZE) {
if (mmu_has_feature(MMU_FTR_TYPE_47x))
ppc47x_pin_tlb(addr + PAGE_OFFSET, addr);

4
arch/powerpc/mm/tlb_hash32.c
View File

@ -177,3 +177,7 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
flush_range(vma->vm_mm, start, end);
}
EXPORT_SYMBOL(flush_tlb_range);
void __init early_init_mmu(void)
{
}

19
arch/powerpc/mm/tlb_nohash.c
View File

@ -35,6 +35,7 @@
#include <linux/preempt.h>
#include <linux/spinlock.h>
#include <linux/memblock.h>
#include <linux/of_fdt.h>
#include <asm/tlbflush.h>
#include <asm/tlb.h>
@ -272,6 +273,17 @@ EXPORT_SYMBOL(flush_tlb_page);
#endif /* CONFIG_SMP */
#ifdef CONFIG_PPC_47x
void __init early_init_mmu_47x(void)
{
#ifdef CONFIG_SMP
unsigned long root = of_get_flat_dt_root();
if (of_get_flat_dt_prop(root, "cooperative-partition", NULL))
mmu_clear_feature(MMU_FTR_USE_TLBIVAX_BCAST);
#endif /* CONFIG_SMP */
}
#endif /* CONFIG_PPC_47x */
/*
* Flush kernel TLB entries in the given range
*/
@ -599,4 +611,11 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
/* Finally limit subsequent allocations */
memblock_set_current_limit(first_memblock_base + ppc64_rma_size);
}
#else /* ! CONFIG_PPC64 */
void __init early_init_mmu(void)
{
#ifdef CONFIG_PPC_47x
early_init_mmu_47x();
#endif
}
#endif /* CONFIG_PPC64 */

147
arch/powerpc/sysdev/ppc4xx_pci.c
View File

@ -650,12 +650,74 @@ struct ppc4xx_pciex_hwops
int (*core_init)(struct device_node *np);
int (*port_init_hw)(struct ppc4xx_pciex_port *port);
int (*setup_utl)(struct ppc4xx_pciex_port *port);
void (*check_link)(struct ppc4xx_pciex_port *port);
};
static struct ppc4xx_pciex_hwops *ppc4xx_pciex_hwops;
#ifdef CONFIG_44x
static int __init ppc4xx_pciex_wait_on_sdr(struct ppc4xx_pciex_port *port,
unsigned int sdr_offset,
unsigned int mask,
unsigned int value,
int timeout_ms)
{
u32 val;
while(timeout_ms--) {
val = mfdcri(SDR0, port->sdr_base + sdr_offset);
if ((val & mask) == value) {
pr_debug("PCIE%d: Wait on SDR %x success with tm %d (%08x)\n",
port->index, sdr_offset, timeout_ms, val);
return 0;
}
msleep(1);
}
return -1;
}
static int __init ppc4xx_pciex_port_reset_sdr(struct ppc4xx_pciex_port *port)
{
/* Wait for reset to complete */
if (ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS, 1 << 20, 0, 10)) {
printk(KERN_WARNING "PCIE%d: PGRST failed\n",
port->index);
return -1;
}
return 0;
}
static void __init ppc4xx_pciex_check_link_sdr(struct ppc4xx_pciex_port *port)
{
printk(KERN_INFO "PCIE%d: Checking link...\n", port->index);
/* Check for card presence detect if supported, if not, just wait for
* link unconditionally.
*
* note that we don't fail if there is no link, we just filter out
* config space accesses. That way, it will be easier to implement
* hotplug later on.
*/
if (!port->has_ibpre ||
!ppc4xx_pciex_wait_on_sdr(port, PESDRn_LOOP,
1 << 28, 1 << 28, 100)) {
printk(KERN_INFO
"PCIE%d: Device detected, waiting for link...\n",
port->index);
if (ppc4xx_pciex_wait_on_sdr(port, PESDRn_LOOP,
0x1000, 0x1000, 2000))
printk(KERN_WARNING
"PCIE%d: Link up failed\n", port->index);
else {
printk(KERN_INFO
"PCIE%d: link is up !\n", port->index);
port->link = 1;
}
} else
printk(KERN_INFO "PCIE%d: No device detected.\n", port->index);
}
/* Check various reset bits of the 440SPe PCIe core */
static int __init ppc440spe_pciex_check_reset(struct device_node *np)
{
@ -806,7 +868,7 @@ static int ppc440spe_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET,
(1 << 24) | (1 << 16), 1 << 12);
return 0;
return ppc4xx_pciex_port_reset_sdr(port);
}
static int ppc440speA_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
@ -856,6 +918,7 @@ static struct ppc4xx_pciex_hwops ppc440speA_pcie_hwops __initdata =
.core_init = ppc440spe_pciex_core_init,
.port_init_hw = ppc440speA_pciex_init_port_hw,
.setup_utl = ppc440speA_pciex_init_utl,
.check_link = ppc4xx_pciex_check_link_sdr,
};
static struct ppc4xx_pciex_hwops ppc440speB_pcie_hwops __initdata =
@ -863,6 +926,7 @@ static struct ppc4xx_pciex_hwops ppc440speB_pcie_hwops __initdata =
.core_init = ppc440spe_pciex_core_init,
.port_init_hw = ppc440speB_pciex_init_port_hw,
.setup_utl = ppc440speB_pciex_init_utl,
.check_link = ppc4xx_pciex_check_link_sdr,
};
static int __init ppc460ex_pciex_core_init(struct device_node *np)
@ -944,7 +1008,7 @@ static int ppc460ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
port->has_ibpre = 1;
return 0;
return ppc4xx_pciex_port_reset_sdr(port);
}
static int ppc460ex_pciex_init_utl(struct ppc4xx_pciex_port *port)
@ -972,6 +1036,7 @@ static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata =
.core_init = ppc460ex_pciex_core_init,
.port_init_hw = ppc460ex_pciex_init_port_hw,
.setup_utl = ppc460ex_pciex_init_utl,
.check_link = ppc4xx_pciex_check_link_sdr,
};
static int __init ppc460sx_pciex_core_init(struct device_node *np)
@ -1075,7 +1140,7 @@ static int ppc460sx_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
port->has_ibpre = 1;
return 0;
return ppc4xx_pciex_port_reset_sdr(port);
}
static int ppc460sx_pciex_init_utl(struct ppc4xx_pciex_port *port)
@ -1089,6 +1154,7 @@ static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = {
.core_init = ppc460sx_pciex_core_init,
.port_init_hw = ppc460sx_pciex_init_port_hw,
.setup_utl = ppc460sx_pciex_init_utl,
.check_link = ppc4xx_pciex_check_link_sdr,
};
#endif /* CONFIG_44x */
@ -1154,7 +1220,7 @@ static int ppc405ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
port->has_ibpre = 1;
return 0;
return ppc4xx_pciex_port_reset_sdr(port);
}
static int ppc405ex_pciex_init_utl(struct ppc4xx_pciex_port *port)
@ -1183,11 +1249,11 @@ static struct ppc4xx_pciex_hwops ppc405ex_pcie_hwops __initdata =
.core_init = ppc405ex_pciex_core_init,
.port_init_hw = ppc405ex_pciex_init_port_hw,
.setup_utl = ppc405ex_pciex_init_utl,
.check_link = ppc4xx_pciex_check_link_sdr,
};
#endif /* CONFIG_40x */
/* Check that the core has been initied and if not, do it */
static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
{
@ -1261,26 +1327,6 @@ static void __init ppc4xx_pciex_port_init_mapping(struct ppc4xx_pciex_port *port
dcr_write(port->dcrs, DCRO_PEGPL_MSGMSK, 0);
}
static int __init ppc4xx_pciex_wait_on_sdr(struct ppc4xx_pciex_port *port,
unsigned int sdr_offset,
unsigned int mask,
unsigned int value,
int timeout_ms)
{
u32 val;
while(timeout_ms--) {
val = mfdcri(SDR0, port->sdr_base + sdr_offset);
if ((val & mask) == value) {
pr_debug("PCIE%d: Wait on SDR %x success with tm %d (%08x)\n",
port->index, sdr_offset, timeout_ms, val);
return 0;
}
msleep(1);
}
return -1;
}
static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port)
{
int rc = 0;
@ -1291,40 +1337,8 @@ static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port)
if (rc != 0)
return rc;
printk(KERN_INFO "PCIE%d: Checking link...\n",
port->index);
/* Wait for reset to complete */
if (ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS, 1 << 20, 0, 10)) {
printk(KERN_WARNING "PCIE%d: PGRST failed\n",
port->index);
return -1;
}
/* Check for card presence detect if supported, if not, just wait for
* link unconditionally.
*
* note that we don't fail if there is no link, we just filter out
* config space accesses. That way, it will be easier to implement
* hotplug later on.
*/
if (!port->has_ibpre ||
!ppc4xx_pciex_wait_on_sdr(port, PESDRn_LOOP,
1 << 28, 1 << 28, 100)) {
printk(KERN_INFO
"PCIE%d: Device detected, waiting for link...\n",
port->index);
if (ppc4xx_pciex_wait_on_sdr(port, PESDRn_LOOP,
0x1000, 0x1000, 2000))
printk(KERN_WARNING
"PCIE%d: Link up failed\n", port->index);
else {
printk(KERN_INFO
"PCIE%d: link is up !\n", port->index);
port->link = 1;
}
} else
printk(KERN_INFO "PCIE%d: No device detected.\n", port->index);
if (ppc4xx_pciex_hwops->check_link)
ppc4xx_pciex_hwops->check_link(port);
/*
* Initialize mapping: disable all regions and configure
@ -1347,14 +1361,17 @@ static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port)
/*
* Check for VC0 active and assert RDY.
*/
if (port->link &&
ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS,
1 << 16, 1 << 16, 5000)) {
printk(KERN_INFO "PCIE%d: VC0 not active\n", port->index);
port->link = 0;
if (port->sdr_base) {
if (port->link &&
ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS,
1 << 16, 1 << 16, 5000)) {
printk(KERN_INFO "PCIE%d: VC0 not active\n", port->index);
port->link = 0;
}
dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET, 0, 1 << 20);
}
dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET, 0, 1 << 20);
msleep(100);
return 0;