Merge commit 'v2.6.38-rc5' into sched/core

Merge reason: Pick up upstream fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Documentation/ABI/testing/sysfs-platform-at91

@@ -0,0 +1,25 @@
+What:		/sys/devices/platform/at91_can/net/<iface>/mb0_id
+Date:		January 2011
+KernelVersion:	2.6.38
+Contact:	Marc Kleine-Budde <kernel@pengutronix.de>
+Description:
+		Value representing the can_id of mailbox 0.
+
+		Default: 0x7ff (standard frame)
+
+		Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in
+		"AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the
+		contents of mailbox 0 may be send under certain
+		conditions (even if disabled or in rx mode).
+
+		The workaround in the errata suggests not to use the
+		mailbox and load it with an unused identifier.
+
+		In order to use an extended can_id add the
+		CAN_EFF_FLAG (0x80000000U) to the can_id. Example:
+
+		- standard id 0x7ff:
+		echo 0x7ff      > /sys/class/net/can0/mb0_id
+
+		- extended id 0x1fffffff:
+		echo 0x9fffffff > /sys/class/net/can0/mb0_id

Documentation/DocBook/drm.tmpl

@@ -73,8 +73,8 @@
       services.
     </para>
     <para>
-      The core of every DRM driver is struct drm_device.  Drivers
-      will typically statically initialize a drm_device structure,
+      The core of every DRM driver is struct drm_driver.  Drivers
+      will typically statically initialize a drm_driver structure,
       then pass it to drm_init() at load time.
     </para>
 
@@ -84,7 +84,7 @@
     <title>Driver initialization</title>
     <para>
       Before calling the DRM initialization routines, the driver must
-      first create and fill out a struct drm_device structure.
+      first create and fill out a struct drm_driver structure.
     </para>
     <programlisting>
       static struct drm_driver driver = {

Documentation/devicetree/booting-without-of.txt

@@ -13,7 +13,6 @@ Table of Contents
 
   I - Introduction
     1) Entry point for arch/powerpc
-    2) Board support
 
   II - The DT block format
     1) Header
@@ -41,13 +40,6 @@ Table of Contents
   VI - System-on-a-chip devices and nodes
     1) Defining child nodes of an SOC
     2) Representing devices without a current OF specification
-      a) PHY nodes
-      b) Interrupt controllers
-      c) 4xx/Axon EMAC ethernet nodes
-      d) Xilinx IP cores
-      e) USB EHCI controllers
-      f) MDIO on GPIOs
-      g) SPI busses
 
   VII - Specifying interrupt information for devices
     1) interrupts property
@@ -123,7 +115,7 @@ Revision Information
 I - Introduction
 ================
 
-During the recent development of the Linux/ppc64 kernel, and more
+During the development of the Linux/ppc64 kernel, and more
 specifically, the addition of new platform types outside of the old
 IBM pSeries/iSeries pair, it was decided to enforce some strict rules
 regarding the kernel entry and bootloader <-> kernel interfaces, in
@@ -146,7 +138,7 @@ section III, but, for example, the kernel does not require you to
 create a node for every PCI device in the system. It is a requirement
 to have a node for PCI host bridges in order to provide interrupt
 routing informations and memory/IO ranges, among others. It is also
-recommended to define nodes for on chip devices and other busses that
+recommended to define nodes for on chip devices and other buses that
 don't specifically fit in an existing OF specification. This creates a
 great flexibility in the way the kernel can then probe those and match
 drivers to device, without having to hard code all sorts of tables. It
@@ -158,7 +150,7 @@ it with special cases.
 1) Entry point for arch/powerpc
 -------------------------------
 
-   There is one and one single entry point to the kernel, at the start
+   There is one single entry point to the kernel, at the start
    of the kernel image. That entry point supports two calling
    conventions:
 
@@ -210,12 +202,6 @@ it with special cases.
         with all CPUs. The way to do that with method b) will be
         described in a later revision of this document.
 
-
-2) Board support
-----------------
-
-64-bit kernels:
-
    Board supports (platforms) are not exclusive config options. An
    arbitrary set of board supports can be built in a single kernel
    image. The kernel will "know" what set of functions to use for a
@@ -234,48 +220,11 @@ it with special cases.
         containing the various callbacks that the generic code will
         use to get to your platform specific code
 
-        c) Add a reference to your "ppc_md" structure in the
-        "machines" table in arch/powerpc/kernel/setup_64.c if you are
-        a 64-bit platform.
-
-        d) request and get assigned a platform number (see PLATFORM_*
-        constants in arch/powerpc/include/asm/processor.h
-
-32-bit embedded kernels:
-
-  Currently, board support is essentially an exclusive config option.
-  The kernel is configured for a single platform.  Part of the reason
-  for this is to keep kernels on embedded systems small and efficient;
-  part of this is due to the fact the code is already that way. In the
-  future, a kernel may support multiple platforms, but only if the
+  A kernel image may support multiple platforms, but only if the
   platforms feature the same core architecture.  A single kernel build
   cannot support both configurations with Book E and configurations
   with classic Powerpc architectures.
 
-  32-bit embedded platforms that are moved into arch/powerpc using a
-  flattened device tree should adopt the merged tree practice of
-  setting ppc_md up dynamically, even though the kernel is currently
-  built with support for only a single platform at a time.  This allows
-  unification of the setup code, and will make it easier to go to a
-  multiple-platform-support model in the future.
-
-NOTE: I believe the above will be true once Ben's done with the merge
-of the boot sequences.... someone speak up if this is wrong!
-
-  To add a 32-bit embedded platform support, follow the instructions
-  for 64-bit platforms above, with the exception that the Kconfig
-  option should be set up such that the kernel builds exclusively for
-  the platform selected.  The processor type for the platform should
-  enable another config option to select the specific board
-  supported.
-
-NOTE: If Ben doesn't merge the setup files, may need to change this to
-point to setup_32.c
-
-
-   I will describe later the boot process and various callbacks that
-   your platform should implement.
-
 
 II - The DT block format
 ========================
@@ -300,8 +249,8 @@ the block to RAM before passing it to the kernel.
 1) Header
 ---------
 
-   The kernel is entered with r3 pointing to an area of memory that is
-   roughly described in arch/powerpc/include/asm/prom.h by the structure
+   The kernel is passed the physical address pointing to an area of memory
+   that is roughly described in include/linux/of_fdt.h by the structure
    boot_param_header:
 
 struct boot_param_header {
@@ -339,7 +288,7 @@ struct boot_param_header {
    All values in this header are in big endian format, the various
    fields in this header are defined more precisely below. All
    "offset" values are in bytes from the start of the header; that is
-   from the value of r3.
+   from the physical base address of the device tree block.
 
    - magic
 
@@ -437,7 +386,7 @@ struct boot_param_header {
 
 
              ------------------------------
-       r3 -> |  struct boot_param_header  |
+     base -> |  struct boot_param_header  |
              ------------------------------
              |      (alignment gap) (*)   |
              ------------------------------
@@ -457,7 +406,7 @@ struct boot_param_header {
       -----> ------------------------------
       |
       |
-      --- (r3 + totalsize)
+      --- (base + totalsize)
 
   (*) The alignment gaps are not necessarily present; their presence
       and size are dependent on the various alignment requirements of
@@ -500,7 +449,7 @@ the device-tree structure. It is typically used to represent "path" in
 the device-tree. More details about the actual format of these will be
 below.
 
-The kernel powerpc generic code does not make any formal use of the
+The kernel generic code does not make any formal use of the
 unit address (though some board support code may do) so the only real
 requirement here for the unit address is to ensure uniqueness of
 the node unit name at a given level of the tree. Nodes with no notion
@@ -518,20 +467,21 @@ path to the root node is "/".
 
 Every node which actually represents an actual device (that is, a node
 which isn't only a virtual "container" for more nodes, like "/cpus"
-is) is also required to have a "device_type" property indicating the
-type of node .
+is) is also required to have a "compatible" property indicating the
+specific hardware and an optional list of devices it is fully
+backwards compatible with.
 
 Finally, every node that can be referenced from a property in another
-node is required to have a "linux,phandle" property. Real open
-firmware implementations provide a unique "phandle" value for every
-node that the "prom_init()" trampoline code turns into
-"linux,phandle" properties. However, this is made optional if the
-flattened device tree is used directly. An example of a node
+node is required to have either a "phandle" or a "linux,phandle"
+property. Real Open Firmware implementations provide a unique
+"phandle" value for every node that the "prom_init()" trampoline code
+turns into "linux,phandle" properties. However, this is made optional
+if the flattened device tree is used directly. An example of a node
 referencing another node via "phandle" is when laying out the
 interrupt tree which will be described in a further version of this
 document.
 
-This "linux, phandle" property is a 32-bit value that uniquely
+The "phandle" property is a 32-bit value that uniquely
 identifies a node. You are free to use whatever values or system of
 values, internal pointers, or whatever to generate these, the only
 requirement is that every node for which you provide that property has
@@ -694,7 +644,7 @@ made of 3 cells, the bottom two containing the actual address itself
 while the top cell contains address space indication, flags, and pci
 bus & device numbers.
 
-For busses that support dynamic allocation, it's the accepted practice
+For buses that support dynamic allocation, it's the accepted practice
 to then not provide the address in "reg" (keep it 0) though while
 providing a flag indicating the address is dynamically allocated, and
 then, to provide a separate "assigned-addresses" property that
@@ -711,7 +661,7 @@ prom_parse.c file of the recent kernels for your bus type.
 The "reg" property only defines addresses and sizes (if #size-cells is
 non-0) within a given bus. In order to translate addresses upward
 (that is into parent bus addresses, and possibly into CPU physical
-addresses), all busses must contain a "ranges" property. If the
+addresses), all buses must contain a "ranges" property. If the
 "ranges" property is missing at a given level, it's assumed that
 translation isn't possible, i.e., the registers are not visible on the
 parent bus.  The format of the "ranges" property for a bus is a list
@@ -727,9 +677,9 @@ example, for a PCI host controller, that would be a CPU address. For a
 PCI<->ISA bridge, that would be a PCI address. It defines the base
 address in the parent bus where the beginning of that range is mapped.
 
-For a new 64-bit powerpc board, I recommend either the 2/2 format or
+For new 64-bit board support, I recommend either the 2/2 format or
 Apple's 2/1 format which is slightly more compact since sizes usually
-fit in a single 32-bit word.   New 32-bit powerpc boards should use a
+fit in a single 32-bit word.   New 32-bit board support should use a
 1/1 format, unless the processor supports physical addresses greater
 than 32-bits, in which case a 2/1 format is recommended.
 
@@ -754,7 +704,7 @@ of their actual names.
 While earlier users of Open Firmware like OldWorld macintoshes tended
 to use the actual device name for the "name" property, it's nowadays
 considered a good practice to use a name that is closer to the device
-class (often equal to device_type). For example, nowadays, ethernet
+class (often equal to device_type). For example, nowadays, Ethernet
 controllers are named "ethernet", an additional "model" property
 defining precisely the chip type/model, and "compatible" property
 defining the family in case a single driver can driver more than one
@@ -772,7 +722,7 @@ is present).
 4) Note about node and property names and character set
 -------------------------------------------------------
 
-While open firmware provides more flexible usage of 8859-1, this
+While Open Firmware provides more flexible usage of 8859-1, this
 specification enforces more strict rules. Nodes and properties should
 be comprised only of ASCII characters 'a' to 'z', '0' to
 '9', ',', '.', '_', '+', '#', '?', and '-'. Node names additionally
@@ -792,7 +742,7 @@ address which can extend beyond that limit.
 --------------------------------
   These are all that are currently required. However, it is strongly
   recommended that you expose PCI host bridges as documented in the
-  PCI binding to open firmware, and your interrupt tree as documented
+  PCI binding to Open Firmware, and your interrupt tree as documented
   in OF interrupt tree specification.
 
   a) The root node
@@ -802,20 +752,12 @@ address which can extend beyond that limit.
     - model : this is your board name/model
     - #address-cells : address representation for "root" devices
     - #size-cells: the size representation for "root" devices
-    - device_type : This property shouldn't be necessary. However, if
-      you decide to create a device_type for your root node, make sure it
-      is _not_ "chrp" unless your platform is a pSeries or PAPR compliant
-      one for 64-bit, or a CHRP-type machine for 32-bit as this will
-      matched by the kernel this way.
-
-  Additionally, some recommended properties are:
-
     - compatible : the board "family" generally finds its way here,
       for example, if you have 2 board models with a similar layout,
       that typically get driven by the same platform code in the
-      kernel, you would use a different "model" property but put a
-      value in "compatible". The kernel doesn't directly use that
-      value but it is generally useful.
+      kernel, you would specify the exact board model in the
+      compatible property followed by an entry that represents the SoC
+      model.
 
   The root node is also generally where you add additional properties
   specific to your board like the serial number if any, that sort of
@@ -841,8 +783,11 @@ address which can extend beyond that limit.
 
   So under /cpus, you are supposed to create a node for every CPU on
   the machine. There is no specific restriction on the name of the
-  CPU, though It's common practice to call it PowerPC,<name>. For
+  CPU, though it's common to call it <architecture>,<core>. For
   example, Apple uses PowerPC,G5 while IBM uses PowerPC,970FX.
+  However, the Generic Names convention suggests that it would be
+  better to simply use 'cpu' for each cpu node and use the compatible
+  property to identify the specific cpu core.
 
   Required properties:
 
@@ -923,7 +868,7 @@ compatibility.
 
   e) The /chosen node
 
-  This node is a bit "special". Normally, that's where open firmware
+  This node is a bit "special". Normally, that's where Open Firmware
   puts some variable environment information, like the arguments, or
   the default input/output devices.
 
@@ -940,11 +885,7 @@ compatibility.
       console device if any. Typically, if you have serial devices on
       your board, you may want to put the full path to the one set as
       the default console in the firmware here, for the kernel to pick
-      it up as its own default console. If you look at the function
-      set_preferred_console() in arch/ppc64/kernel/setup.c, you'll see
-      that the kernel tries to find out the default console and has
-      knowledge of various types like 8250 serial ports. You may want
-      to extend this function to add your own.
+      it up as its own default console.
 
   Note that u-boot creates and fills in the chosen node for platforms
   that use it.
@@ -955,23 +896,23 @@ compatibility.
 
   f) the /soc<SOCname> node
 
-  This node is used to represent a system-on-a-chip (SOC) and must be
-  present if the processor is a SOC. The top-level soc node contains
-  information that is global to all devices on the SOC. The node name
-  should contain a unit address for the SOC, which is the base address
-  of the memory-mapped register set for the SOC. The name of an soc
+  This node is used to represent a system-on-a-chip (SoC) and must be
+  present if the processor is a SoC. The top-level soc node contains
+  information that is global to all devices on the SoC. The node name
+  should contain a unit address for the SoC, which is the base address
+  of the memory-mapped register set for the SoC. The name of an SoC
   node should start with "soc", and the remainder of the name should
   represent the part number for the soc.  For example, the MPC8540's
   soc node would be called "soc8540".
 
   Required properties:
 
-    - device_type : Should be "soc"
     - ranges : Should be defined as specified in 1) to describe the
-      translation of SOC addresses for memory mapped SOC registers.
-    - bus-frequency: Contains the bus frequency for the SOC node.
+      translation of SoC addresses for memory mapped SoC registers.
+    - bus-frequency: Contains the bus frequency for the SoC node.
       Typically, the value of this field is filled in by the boot
       loader.
+    - compatible : Exact model of the SoC
 
 
   Recommended properties:
@@ -1155,12 +1096,13 @@ while all this has been defined and implemented.
 
   - An example of code for iterating nodes & retrieving properties
     directly from the flattened tree format can be found in the kernel
-    file arch/ppc64/kernel/prom.c, look at scan_flat_dt() function,
+    file drivers/of/fdt.c.  Look at the of_scan_flat_dt() function,
     its usage in early_init_devtree(), and the corresponding various
     early_init_dt_scan_*() callbacks. That code can be re-used in a
     GPL bootloader, and as the author of that code, I would be happy
     to discuss possible free licensing to any vendor who wishes to
     integrate all or part of this code into a non-GPL bootloader.
+    (reference needed; who is 'I' here? ---gcl Jan 31, 2011)
 
 
 
@@ -1203,18 +1145,19 @@ MPC8540.
 2) Representing devices without a current OF specification
 ----------------------------------------------------------
 
-Currently, there are many devices on SOCs that do not have a standard
-representation pre-defined as part of the open firmware
-specifications, mainly because the boards that contain these SOCs are
-not currently booted using open firmware.   This section contains
-descriptions for the SOC devices for which new nodes have been
-defined; this list will expand as more and more SOC-containing
-platforms are moved over to use the flattened-device-tree model.
+Currently, there are many devices on SoCs that do not have a standard
+representation defined as part of the Open Firmware specifications,
+mainly because the boards that contain these SoCs are not currently
+booted using Open Firmware.  Binding documentation for new devices
+should be added to the Documentation/devicetree/bindings directory.
+That directory will expand as device tree support is added to more and
+more SoCs.
+
 
 VII - Specifying interrupt information for devices
 ===================================================
 
-The device tree represents the busses and devices of a hardware
+The device tree represents the buses and devices of a hardware
 system in a form similar to the physical bus topology of the
 hardware.
 

Documentation/feature-removal-schedule.txt

@@ -603,3 +603,19 @@ Why:	The adm9240, w83792d and w83793 hardware monitoring drivers have
 Who:	Jean Delvare <khali@linux-fr.org>
 
 ----------------------------
+
+What:	noswapaccount kernel command line parameter
+When:	2.6.40
+Why:	The original implementation of memsw feature enabled by
+	CONFIG_CGROUP_MEM_RES_CTLR_SWAP could be disabled by the noswapaccount
+	kernel parameter (introduced in 2.6.29-rc1). Later on, this decision
+	turned out to be not ideal because we cannot have the feature compiled
+	in and disabled by default and let only interested to enable it
+	(e.g. general distribution kernels might need it). Therefore we have
+	added swapaccount[=0|1] parameter (introduced in 2.6.37) which provides
+	the both possibilities. If we remove noswapaccount we will have
+	less command line parameters with the same functionality and we
+	can also cleanup the parameter handling a bit ().
+Who:	Michal Hocko <mhocko@suse.cz>
+
+----------------------------

Documentation/filesystems/ntfs.txt

@@ -460,6 +460,8 @@ Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog.
 2.1.30:
 	- Fix writev() (it kept writing the first segment over and over again
 	  instead of moving onto subsequent segments).
+	- Fix crash in ntfs_mft_record_alloc() when mapping the new extent mft
+	  record failed.
 2.1.29:
 	- Fix a deadlock when mounting read-write.
 2.1.28:

Documentation/networking/bonding.txt

@@ -49,7 +49,8 @@ Table of Contents
 3.3	Configuring Bonding Manually with Ifenslave
 3.3.1		Configuring Multiple Bonds Manually
 3.4	Configuring Bonding Manually via Sysfs
-3.5	Overriding Configuration for Special Cases
+3.5	Configuration with Interfaces Support
+3.6	Overriding Configuration for Special Cases
 
 4. Querying Bonding Configuration
 4.1	Bonding Configuration
@@ -161,8 +162,8 @@ onwards) do not have /usr/include/linux symbolically linked to the
 default kernel source include directory.
 
 SECOND IMPORTANT NOTE:
-	If you plan to configure bonding using sysfs, you do not need
-to use ifenslave.
+	If you plan to configure bonding using sysfs or using the
+/etc/network/interfaces file, you do not need to use ifenslave.
 
 2. Bonding Driver Options
 =========================
@@ -779,22 +780,26 @@ resend_igmp
 
 	You can configure bonding using either your distro's network
 initialization scripts, or manually using either ifenslave or the
-sysfs interface.  Distros generally use one of two packages for the
-network initialization scripts: initscripts or sysconfig.  Recent
-versions of these packages have support for bonding, while older
+sysfs interface.  Distros generally use one of three packages for the
+network initialization scripts: initscripts, sysconfig or interfaces.
+Recent versions of these packages have support for bonding, while older
 versions do not.
 
 	We will first describe the options for configuring bonding for
-distros using versions of initscripts and sysconfig with full or
-partial support for bonding, then provide information on enabling
+distros using versions of initscripts, sysconfig and interfaces with full
+or partial support for bonding, then provide information on enabling
 bonding without support from the network initialization scripts (i.e.,
 older versions of initscripts or sysconfig).
 
-	If you're unsure whether your distro uses sysconfig or
-initscripts, or don't know if it's new enough, have no fear.
+	If you're unsure whether your distro uses sysconfig,
+initscripts or interfaces, or don't know if it's new enough, have no fear.
 Determining this is fairly straightforward.
 
-	First, issue the command:
+	First, look for a file called interfaces in /etc/network directory.
+If this file is present in your system, then your system use interfaces. See
+Configuration with Interfaces Support.
+
+	Else, issue the command:
 
 $ rpm -qf /sbin/ifup
 
@@ -1327,8 +1332,62 @@ echo 2000 > /sys/class/net/bond1/bonding/arp_interval
 echo +eth2 > /sys/class/net/bond1/bonding/slaves
 echo +eth3 > /sys/class/net/bond1/bonding/slaves
 
-3.5 Overriding Configuration for Special Cases
+3.5 Configuration with Interfaces Support
+-----------------------------------------
+
+        This section applies to distros which use /etc/network/interfaces file
+to describe network interface configuration, most notably Debian and it's
+derivatives.
+
+	The ifup and ifdown commands on Debian don't support bonding out of
+the box. The ifenslave-2.6 package should be installed to provide bonding
+support.  Once installed, this package will provide bond-* options to be used
+into /etc/network/interfaces.
+
+	Note that ifenslave-2.6 package will load the bonding module and use
+the ifenslave command when appropriate.
+
+Example Configurations
+----------------------
+
+In /etc/network/interfaces, the following stanza will configure bond0, in
+active-backup mode, with eth0 and eth1 as slaves.
+
+auto bond0
+iface bond0 inet dhcp
+	bond-slaves eth0 eth1
+	bond-mode active-backup
+	bond-miimon 100
+	bond-primary eth0 eth1
+
+If the above configuration doesn't work, you might have a system using
+upstart for system startup. This is most notably true for recent
+Ubuntu versions. The following stanza in /etc/network/interfaces will
+produce the same result on those systems.
+
+auto bond0
+iface bond0 inet dhcp
+	bond-slaves none
+	bond-mode active-backup
+	bond-miimon 100
+
+auto eth0
+iface eth0 inet manual
+	bond-master bond0
+	bond-primary eth0 eth1
+
+auto eth1
+iface eth1 inet manual
+	bond-master bond0
+	bond-primary eth0 eth1
+
+For a full list of bond-* supported options in /etc/network/interfaces and some
+more advanced examples tailored to you particular distros, see the files in
+/usr/share/doc/ifenslave-2.6.
+
+3.6 Overriding Configuration for Special Cases
 ----------------------------------------------
+
 When using the bonding driver, the physical port which transmits a frame is
 typically selected by the bonding driver, and is not relevant to the user or
 system administrator.  The output port is simply selected using the policies of

Documentation/networking/ip-sysctl.txt

@@ -187,7 +187,7 @@ tcp_cookie_size - INTEGER
 tcp_dsack - BOOLEAN
 	Allows TCP to send "duplicate" SACKs.
 
-tcp_ecn - BOOLEAN
+tcp_ecn - INTEGER
 	Enable Explicit Congestion Notification (ECN) in TCP. ECN is only
 	used when both ends of the TCP flow support it. It is useful to
 	avoid losses due to congestion (when the bottleneck router supports

Documentation/scheduler/sched-stats.txt

@@ -1,3 +1,7 @@
+Version 15 of schedstats dropped counters for some sched_yield:
+yld_exp_empty, yld_act_empty and yld_both_empty. Otherwise, it is
+identical to version 14.
+
 Version 14 of schedstats includes support for sched_domains, which hit the
 mainline kernel in 2.6.20 although it is identical to the stats from version
 12 which was in the kernel from 2.6.13-2.6.19 (version 13 never saw a kernel
@@ -28,32 +32,25 @@ to write their own scripts, the fields are described here.
 
 CPU statistics
 --------------
-cpu<N> 1 2 3 4 5 6 7 8 9 10 11 12
+cpu<N> 1 2 3 4 5 6 7 8 9
 
-NOTE: In the sched_yield() statistics, the active queue is considered empty
-    if it has only one process in it, since obviously the process calling
-    sched_yield() is that process.
-
-First four fields are sched_yield() statistics:
-     1) # of times both the active and the expired queue were empty
-     2) # of times just the active queue was empty
-     3) # of times just the expired queue was empty
-     4) # of times sched_yield() was called
+First field is a sched_yield() statistic:
+     1) # of times sched_yield() was called
 
 Next three are schedule() statistics:
-     5) # of times we switched to the expired queue and reused it
-     6) # of times schedule() was called
-     7) # of times schedule() left the processor idle
+     2) # of times we switched to the expired queue and reused it
+     3) # of times schedule() was called
+     4) # of times schedule() left the processor idle
 
 Next two are try_to_wake_up() statistics:
-     8) # of times try_to_wake_up() was called
-     9) # of times try_to_wake_up() was called to wake up the local cpu
+     5) # of times try_to_wake_up() was called
+     6) # of times try_to_wake_up() was called to wake up the local cpu
 
 Next three are statistics describing scheduling latency:
-    10) sum of all time spent running by tasks on this processor (in jiffies)
-    11) sum of all time spent waiting to run by tasks on this processor (in
+     7) sum of all time spent running by tasks on this processor (in jiffies)
+     8) sum of all time spent waiting to run by tasks on this processor (in
         jiffies)
-    12) # of timeslices run on this cpu
+     9) # of timeslices run on this cpu
 
 
 Domain statistics

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -296,6 +296,7 @@ Conexant 5066
 =============
   laptop	Basic Laptop config (default)
   hp-laptop	HP laptops, e g G60
+  asus		Asus K52JU, Lenovo G560
   dell-laptop	Dell laptops
   dell-vostro	Dell Vostro
   olpc-xo-1_5	OLPC XO 1.5

MAINTAINERS

@@ -978,6 +978,8 @@ S:	Maintained
 F:	arch/arm/plat-samsung/
 F:	arch/arm/plat-s3c24xx/
 F:	arch/arm/plat-s5p/
+F:	drivers/*/*s3c2410*
+F:	drivers/*/*/*s3c2410*
 
 ARM/S3C2410 ARM ARCHITECTURE
 M:	Ben Dooks <ben-linux@fluff.org>
@@ -2124,6 +2126,7 @@ S:	Supported
 F:	fs/dlm/
 
 DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
+M:	Vinod Koul <vinod.koul@intel.com>
 M:	Dan Williams <dan.j.williams@intel.com>
 S:	Supported
 F:	drivers/dma/
@@ -2772,6 +2775,15 @@ F:	Documentation/isdn/README.gigaset
 F:	drivers/isdn/gigaset/
 F:	include/linux/gigaset_dev.h
 
+GPIO SUBSYSTEM
+M:	Grant Likely <grant.likely@secretlab.ca>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+T:	git git://git.secretlab.ca/git/linux-2.6.git
+F:	Documentation/gpio/gpio.txt
+F:	drivers/gpio/
+F:	include/linux/gpio*
+
 GRETH 10/100/1G Ethernet MAC device driver
 M:	Kristoffer Glembo <kristoffer@gaisler.com>
 L:	netdev@vger.kernel.org
@@ -3139,6 +3151,12 @@ S:	Maintained
 F:	net/ieee802154/
 F:	drivers/ieee802154/
 
+IKANOS/ADI EAGLE ADSL USB DRIVER
+M:	Matthieu Castet <castet.matthieu@free.fr>
+M:	Stanislaw Gruszka <stf_xl@wp.pl>
+S:	Maintained
+F:	drivers/usb/atm/ueagle-atm.c
+
 INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
 M:	Mimi Zohar <zohar@us.ibm.com>
 S:	Supported
@@ -3327,7 +3345,6 @@ F:	drivers/net/wimax/i2400m/
 F:	include/linux/wimax/i2400m.h
 
 INTEL WIRELESS WIFI LINK (iwlwifi)
-M:	Reinette Chatre <reinette.chatre@intel.com>
 M:	Wey-Yi Guy <wey-yi.w.guy@intel.com>
 M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
@@ -4584,7 +4601,7 @@ F:	drivers/i2c/busses/i2c-ocores.c
 
 OPEN FIRMWARE AND FLATTENED DEVICE TREE
 M:	Grant Likely <grant.likely@secretlab.ca>
-L:	devicetree-discuss@lists.ozlabs.org
+L:	devicetree-discuss@lists.ozlabs.org (moderated for non-subscribers)
 W:	http://fdt.secretlab.ca
 T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
@@ -5544,12 +5561,11 @@ S:	Supported
 F:	drivers/scsi/be2iscsi/
 
 SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
-M:	Sathya Perla <sathyap@serverengines.com>
-M:	Subbu Seetharaman <subbus@serverengines.com>
-M:	Sarveshwar Bandi <sarveshwarb@serverengines.com>
-M:	Ajit Khaparde <ajitk@serverengines.com>
+M:	Sathya Perla <sathya.perla@emulex.com>
+M:	Subbu Seetharaman <subbu.seetharaman@emulex.com>
+M:	Ajit Khaparde <ajit.khaparde@emulex.com>
 L:	netdev@vger.kernel.org
-W:	http://www.serverengines.com
+W:	http://www.emulex.com
 S:	Supported
 F:	drivers/net/benet/
 
@@ -5609,18 +5625,20 @@ F:	include/linux/sfi*.h
 
 SIMTEC EB110ATX (Chalice CATS)
 P:	Ben Dooks
-M:	Vincent Sanders <support@simtec.co.uk>
+P:	Vincent Sanders <vince@simtec.co.uk>
+M:	Simtec Linux Team <linux@simtec.co.uk>
 W:	http://www.simtec.co.uk/products/EB110ATX/
 S:	Supported
 
 SIMTEC EB2410ITX (BAST)
 P:	Ben Dooks
-M:	Vincent Sanders <support@simtec.co.uk>
+P:	Vincent Sanders <vince@simtec.co.uk>
+M:	Simtec Linux Team <linux@simtec.co.uk>
 W:	http://www.simtec.co.uk/products/EB2410ITX/
 S:	Supported
-F:	arch/arm/mach-s3c2410/
-F:	drivers/*/*s3c2410*
-F:	drivers/*/*/*s3c2410*
+F:	arch/arm/mach-s3c2410/mach-bast.c
+F:	arch/arm/mach-s3c2410/bast-ide.c
+F:	arch/arm/mach-s3c2410/bast-irq.c
 
 TI DAVINCI MACHINE SUPPORT
 M:	Kevin Hilman <khilman@deeprootsystems.com>
@@ -6595,6 +6613,16 @@ S:	Maintained
 F:	drivers/char/virtio_console.c
 F:	include/linux/virtio_console.h
 
+VIRTIO CORE, NET AND BLOCK DRIVERS
+M:	Rusty Russell <rusty@rustcorp.com.au>
+M:	"Michael S. Tsirkin" <mst@redhat.com>
+L:	virtualization@lists.linux-foundation.org
+S:	Maintained
+F:	drivers/virtio/
+F:	drivers/net/virtio_net.c
+F:	drivers/block/virtio_blk.c
+F:	include/linux/virtio_*.h
+
 VIRTIO HOST (VHOST)
 M:	"Michael S. Tsirkin" <mst@redhat.com>
 L:	kvm@vger.kernel.org
@@ -6768,12 +6796,12 @@ S:	Maintained
 F:	drivers/net/wireless/wl1251/*
 
 WL1271 WIRELESS DRIVER
-M:	Luciano Coelho <luciano.coelho@nokia.com>
+M:	Luciano Coelho <coelho@ti.com>
 L:	linux-wireless@vger.kernel.org
-W:	http://wireless.kernel.org
+W:	http://wireless.kernel.org/en/users/Drivers/wl12xx
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git
 S:	Maintained
-F:	drivers/net/wireless/wl12xx/wl1271*
+F:	drivers/net/wireless/wl12xx/
 F:	include/linux/wl12xx.h
 
 WL3501 WIRELESS PCMCIA CARD DRIVER

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 38
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc5
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -1391,7 +1391,7 @@ config AEABI
 
 config OABI_COMPAT
 	bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
-	depends on AEABI && EXPERIMENTAL
+	depends on AEABI && EXPERIMENTAL && !THUMB2_KERNEL
 	default y
 	help
 	  This option preserves the old syscall interface along with the

arch/arm/include/asm/io.h

@@ -95,6 +95,15 @@ static inline void __iomem *__typesafe_io(unsigned long addr)
 	return (void __iomem *)addr;
 }
 
+/* IO barriers */
+#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
+#define __iormb()		rmb()
+#define __iowmb()		wmb()
+#else
+#define __iormb()		do { } while (0)
+#define __iowmb()		do { } while (0)
+#endif
+
 /*
  * Now, pick up the machine-defined IO definitions
  */
@@ -125,17 +134,17 @@ static inline void __iomem *__typesafe_io(unsigned long addr)
  * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
  */
 #ifdef __io
-#define outb(v,p)		__raw_writeb(v,__io(p))
-#define outw(v,p)		__raw_writew((__force __u16) \
-					cpu_to_le16(v),__io(p))
-#define outl(v,p)		__raw_writel((__force __u32) \
-					cpu_to_le32(v),__io(p))
+#define outb(v,p)	({ __iowmb(); __raw_writeb(v,__io(p)); })
+#define outw(v,p)	({ __iowmb(); __raw_writew((__force __u16) \
+					cpu_to_le16(v),__io(p)); })
+#define outl(v,p)	({ __iowmb(); __raw_writel((__force __u32) \
+					cpu_to_le32(v),__io(p)); })
 
-#define inb(p)	({ __u8 __v = __raw_readb(__io(p)); __v; })
+#define inb(p)	({ __u8 __v = __raw_readb(__io(p)); __iormb(); __v; })
 #define inw(p)	({ __u16 __v = le16_to_cpu((__force __le16) \
-			__raw_readw(__io(p))); __v; })
+			__raw_readw(__io(p))); __iormb(); __v; })
 #define inl(p)	({ __u32 __v = le32_to_cpu((__force __le32) \
-			__raw_readl(__io(p))); __v; })
+			__raw_readl(__io(p))); __iormb(); __v; })
 
 #define outsb(p,d,l)		__raw_writesb(__io(p),d,l)
 #define outsw(p,d,l)		__raw_writesw(__io(p),d,l)
@@ -192,14 +201,6 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
 #define writel_relaxed(v,c)	((void)__raw_writel((__force u32) \
 					cpu_to_le32(v),__mem_pci(c)))
 
-#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
-#define __iormb()		rmb()
-#define __iowmb()		wmb()
-#else
-#define __iormb()		do { } while (0)
-#define __iowmb()		do { } while (0)
-#endif
-
 #define readb(c)		({ u8  __v = readb_relaxed(c); __iormb(); __v; })
 #define readw(c)		({ u16 __v = readw_relaxed(c); __iormb(); __v; })
 #define readl(c)		({ u32 __v = readl_relaxed(c); __iormb(); __v; })

arch/arm/kernel/head.S

@@ -391,25 +391,24 @@ ENDPROC(__turn_mmu_on)
 
 
 #ifdef CONFIG_SMP_ON_UP
+	__INIT
 __fixup_smp:
-	mov	r4, #0x00070000
-	orr	r3, r4, #0xff000000	@ mask 0xff070000
-	orr	r4, r4, #0x41000000	@ val 0x41070000
-	and	r0, r9, r3
-	teq	r0, r4			@ ARM CPU and ARMv6/v7?
+	and	r3, r9, #0x000f0000	@ architecture version
+	teq	r3, #0x000f0000		@ CPU ID supported?
 	bne	__fixup_smp_on_up	@ no, assume UP
 
-	orr	r3, r3, #0x0000ff00
-	orr	r3, r3, #0x000000f0	@ mask 0xff07fff0
+	bic	r3, r9, #0x00ff0000
+	bic	r3, r3, #0x0000000f	@ mask 0xff00fff0
+	mov	r4, #0x41000000
 	orr	r4, r4, #0x0000b000
-	orr	r4, r4, #0x00000020	@ val 0x4107b020
-	and	r0, r9, r3
-	teq	r0, r4			@ ARM 11MPCore?
+	orr	r4, r4, #0x00000020	@ val 0x4100b020
+	teq	r3, r4			@ ARM 11MPCore?
 	moveq	pc, lr			@ yes, assume SMP
 
 	mrc	p15, 0, r0, c0, c0, 5	@ read MPIDR
-	tst	r0, #1 << 31
-	movne	pc, lr			@ bit 31 => SMP
+	and	r0, r0, #0xc0000000	@ multiprocessing extensions and
+	teq	r0, #0x80000000		@ not part of a uniprocessor system?
+	moveq	pc, lr			@ yes, assume SMP
 
 __fixup_smp_on_up:
 	adr	r0, 1f
@@ -417,18 +416,7 @@ __fixup_smp_on_up:
 	sub	r3, r0, r3
 	add	r4, r4, r3
 	add	r5, r5, r3
-2:	cmp	r4, r5
-	movhs	pc, lr
-	ldmia	r4!, {r0, r6}
- ARM(	str	r6, [r0, r3]	)
- THUMB(	add	r0, r0, r3	)
-#ifdef __ARMEB__
- THUMB(	mov	r6, r6, ror #16	)	@ Convert word order for big-endian.
-#endif
- THUMB(	strh	r6, [r0], #2	)	@ For Thumb-2, store as two halfwords
- THUMB(	mov	r6, r6, lsr #16	)	@ to be robust against misaligned r3.
- THUMB(	strh	r6, [r0]	)
-	b	2b
+	b	__do_fixup_smp_on_up
 ENDPROC(__fixup_smp)
 
 	.align
@@ -442,7 +430,31 @@ smp_on_up:
 	ALT_SMP(.long	1)
 	ALT_UP(.long	0)
 	.popsection
-
 #endif
 
+	.text
+__do_fixup_smp_on_up:
+	cmp	r4, r5
+	movhs	pc, lr
+	ldmia	r4!, {r0, r6}
+ ARM(	str	r6, [r0, r3]	)
+ THUMB(	add	r0, r0, r3	)
+#ifdef __ARMEB__
+ THUMB(	mov	r6, r6, ror #16	)	@ Convert word order for big-endian.
+#endif
+ THUMB(	strh	r6, [r0], #2	)	@ For Thumb-2, store as two halfwords
+ THUMB(	mov	r6, r6, lsr #16	)	@ to be robust against misaligned r3.
+ THUMB(	strh	r6, [r0]	)
+	b	__do_fixup_smp_on_up
+ENDPROC(__do_fixup_smp_on_up)
+
+ENTRY(fixup_smp)
+	stmfd	sp!, {r4 - r6, lr}
+	mov	r4, r0
+	add	r5, r0, r1
+	mov	r3, #0
+	bl	__do_fixup_smp_on_up
+	ldmfd	sp!, {r4 - r6, pc}
+ENDPROC(fixup_smp)
+
 #include "head-common.S"

arch/arm/kernel/hw_breakpoint.c

@@ -137,11 +137,10 @@ static u8 get_debug_arch(void)
 	u32 didr;
 
 	/* Do we implement the extended CPUID interface? */
-	if (((read_cpuid_id() >> 16) & 0xf) != 0xf) {
-		pr_warning("CPUID feature registers not supported. "
-				"Assuming v6 debug is present.\n");
+	if (WARN_ONCE((((read_cpuid_id() >> 16) & 0xf) != 0xf),
+	    "CPUID feature registers not supported. "
+	    "Assuming v6 debug is present.\n"))
 		return ARM_DEBUG_ARCH_V6;
-	}
 
 	ARM_DBG_READ(c0, 0, didr);
 	return (didr >> 16) & 0xf;
@@ -152,6 +151,12 @@ u8 arch_get_debug_arch(void)
 	return debug_arch;
 }
 
+static int debug_arch_supported(void)
+{
+	u8 arch = get_debug_arch();
+	return arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14;
+}
+
 /* Determine number of BRP register available. */
 static int get_num_brp_resources(void)
 {
@@ -268,6 +273,9 @@ out:
 
 int hw_breakpoint_slots(int type)
 {
+	if (!debug_arch_supported())
+		return 0;
+
 	/*
 	 * We can be called early, so don't rely on
 	 * our static variables being initialised.
@@ -834,11 +842,11 @@ static void reset_ctrl_regs(void *unused)
 
 	/*
 	 * v7 debug contains save and restore registers so that debug state
-	 * can be maintained across low-power modes without leaving
-	 * the debug logic powered up. It is IMPLEMENTATION DEFINED whether
-	 * we can write to the debug registers out of reset, so we must
-	 * unlock the OS Lock Access Register to avoid taking undefined
-	 * instruction exceptions later on.
+	 * can be maintained across low-power modes without leaving the debug
+	 * logic powered up. It is IMPLEMENTATION DEFINED whether we can access
+	 * the debug registers out of reset, so we must unlock the OS Lock
+	 * Access Register to avoid taking undefined instruction exceptions
+	 * later on.
 	 */
 	if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) {
 		/*
@@ -882,7 +890,7 @@ static int __init arch_hw_breakpoint_init(void)
 
 	debug_arch = get_debug_arch();
 
-	if (debug_arch > ARM_DEBUG_ARCH_V7_ECP14) {
+	if (!debug_arch_supported()) {
 		pr_info("debug architecture 0x%x unsupported.\n", debug_arch);
 		return 0;
 	}
@@ -899,18 +907,18 @@ static int __init arch_hw_breakpoint_init(void)
 		pr_info("%d breakpoint(s) reserved for watchpoint "
 				"single-step.\n", core_num_reserved_brps);
 
+	/*
+	 * Reset the breakpoint resources. We assume that a halting
+	 * debugger will leave the world in a nice state for us.
+	 */
+	on_each_cpu(reset_ctrl_regs, NULL, 1);
+
 	ARM_DBG_READ(c1, 0, dscr);
 	if (dscr & ARM_DSCR_HDBGEN) {
+		max_watchpoint_len = 4;
 		pr_warning("halting debug mode enabled. Assuming maximum "
-				"watchpoint size of 4 bytes.");
+			   "watchpoint size of %u bytes.", max_watchpoint_len);
 	} else {
-		/*
-		 * Reset the breakpoint resources. We assume that a halting
-		 * debugger will leave the world in a nice state for us.
-		 */
-		smp_call_function(reset_ctrl_regs, NULL, 1);
-		reset_ctrl_regs(NULL);
-
 		/* Work out the maximum supported watchpoint length. */
 		max_watchpoint_len = get_max_wp_len();
 		pr_info("maximum watchpoint size is %u bytes.\n",

arch/arm/kernel/module.c

@@ -22,6 +22,7 @@
 
 #include <asm/pgtable.h>
 #include <asm/sections.h>
+#include <asm/smp_plat.h>
 #include <asm/unwind.h>
 
 #ifdef CONFIG_XIP_KERNEL
@@ -268,12 +269,28 @@ struct mod_unwind_map {
 	const Elf_Shdr *txt_sec;
 };
 
+static const Elf_Shdr *find_mod_section(const Elf32_Ehdr *hdr,
+	const Elf_Shdr *sechdrs, const char *name)
+{
+	const Elf_Shdr *s, *se;
+	const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+
+	for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++)
+		if (strcmp(name, secstrs + s->sh_name) == 0)
+			return s;
+
+	return NULL;
+}
+
+extern void fixup_smp(const void *, unsigned long);
+
 int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
 		    struct module *mod)
 {
+	const Elf_Shdr * __maybe_unused s = NULL;
 #ifdef CONFIG_ARM_UNWIND
 	const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
-	const Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
+	const Elf_Shdr *sechdrs_end = sechdrs + hdr->e_shnum;
 	struct mod_unwind_map maps[ARM_SEC_MAX];
 	int i;
 
@@ -315,6 +332,9 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
 					         maps[i].txt_sec->sh_addr,
 					         maps[i].txt_sec->sh_size);
 #endif
+	s = find_mod_section(hdr, sechdrs, ".alt.smp.init");
+	if (s && !is_smp())
+		fixup_smp((void *)s->sh_addr, s->sh_size);
 	return 0;
 }
 

arch/arm/kernel/perf_event.c

@@ -700,7 +700,7 @@ user_backtrace(struct frame_tail __user *tail,
 	 * Frame pointers should strictly progress back up the stack
 	 * (towards higher addresses).
 	 */
-	if (tail >= buftail.fp)
+	if (tail + 1 >= buftail.fp)
 		return NULL;
 
 	return buftail.fp - 1;

arch/arm/mach-ep93xx/core.c

@@ -838,7 +838,7 @@ EXPORT_SYMBOL(ep93xx_i2s_release);
 static struct resource ep93xx_ac97_resources[] = {
 	{
 		.start	= EP93XX_AAC_PHYS_BASE,
-		.end	= EP93XX_AAC_PHYS_BASE + 0xb0 - 1,
+		.end	= EP93XX_AAC_PHYS_BASE + 0xac - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{

arch/arm/mach-footbridge/include/mach/debug-macro.S

@@ -17,8 +17,8 @@
 	/* For NetWinder debugging */
 		.macro	addruart, rp, rv
 		mov	\rp, #0x000003f8
-		orr	\rv, \rp, #0x7c000000	@ physical
-		orr	\rp, \rp, #0xff000000	@ virtual
+		orr	\rv, \rp, #0xff000000	@ virtual
+		orr	\rp, \rp, #0x7c000000	@ physical
 		.endm
 
 #define UART_SHIFT	0

arch/arm/mach-imx/mach-mx25_3ds.c

@@ -180,7 +180,7 @@ static const uint32_t mx25pdk_keymap[] = {
 	KEY(3, 3, KEY_POWER),
 };
 
-static const struct matrix_keymap_data mx25pdk_keymap_data __initdata = {
+static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = {
 	.keymap		= mx25pdk_keymap,
 	.keymap_size	= ARRAY_SIZE(mx25pdk_keymap),
 };

arch/arm/mach-ixp4xx/common.c

@@ -432,7 +432,7 @@ static struct clocksource clocksource_ixp4xx = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-unsigned long ixp4xx_timer_freq = FREQ;
+unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
 EXPORT_SYMBOL(ixp4xx_timer_freq);
 static void __init ixp4xx_clocksource_init(void)
 {
@@ -496,7 +496,7 @@ static struct clock_event_device clockevent_ixp4xx = {
 
 static void __init ixp4xx_clockevent_init(void)
 {
-	clockevent_ixp4xx.mult = div_sc(FREQ, NSEC_PER_SEC,
+	clockevent_ixp4xx.mult = div_sc(IXP4XX_TIMER_FREQ, NSEC_PER_SEC,
 					clockevent_ixp4xx.shift);
 	clockevent_ixp4xx.max_delta_ns =
 		clockevent_delta2ns(0xfffffffe, &clockevent_ixp4xx);

arch/arm/mach-ixp4xx/include/mach/timex.h

@@ -10,6 +10,7 @@
  * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
  * timer register ignores the bottom 2 bits of the LATCH value.
  */
-#define FREQ 66666000
-#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
+#define IXP4XX_TIMER_FREQ 66666000
+#define CLOCK_TICK_RATE \
+	(((IXP4XX_TIMER_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
 

arch/arm/mach-ixp4xx/ixp4xx_qmgr.c

@@ -265,6 +265,11 @@ void qmgr_release_queue(unsigned int queue)
 	       qmgr_queue_descs[queue], queue);
 	qmgr_queue_descs[queue][0] = '\x0';
 #endif
+
+	while ((addr = qmgr_get_entry(queue)))
+		printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n",
+		       queue, addr);
+
 	__raw_writel(0, &qmgr_regs->sram[queue]);
 
 	used_sram_bitmap[0] &= ~mask[0];
@@ -275,10 +280,6 @@ void qmgr_release_queue(unsigned int queue)
 	spin_unlock_irq(&qmgr_lock);
 
 	module_put(THIS_MODULE);
-
-	while ((addr = qmgr_get_entry(queue)))
-		printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n",
-		       queue, addr);
 }
 
 static int qmgr_init(void)

arch/arm/mach-mxs/clock-mx23.c

@@ -304,7 +304,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate)		\
 	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
 	reg &= ~BM_CLKCTRL_##dr##_DIV;					\
 	reg |= div << BP_CLKCTRL_##dr##_DIV;				\
-	if (reg | (1 << clk->enable_shift)) {				\
+	if (reg & (1 << clk->enable_shift)) {				\
 		pr_err("%s: clock is gated\n", __func__);		\
 		return -EINVAL;						\
 	}								\
@@ -347,7 +347,7 @@ static int name##_set_parent(struct clk *clk, struct clk *parent)	\
 {									\
 	if (parent != clk->parent) {					\
 		__raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit,		\
-			 HW_CLKCTRL_CLKSEQ_TOG);			\
+			 CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG);	\
 		clk->parent = parent;					\
 	}								\
 									\

arch/arm/mach-mxs/clock-mx28.c

@@ -355,12 +355,12 @@ static int name##_set_rate(struct clk *clk, unsigned long rate)		\
 	} else {							\
 		reg &= ~BM_CLKCTRL_##dr##_DIV;				\
 		reg |= div << BP_CLKCTRL_##dr##_DIV;			\
-		if (reg | (1 << clk->enable_shift)) {			\
+		if (reg & (1 << clk->enable_shift)) {			\
 			pr_err("%s: clock is gated\n", __func__);	\
 			return -EINVAL;					\
 		}							\
 	}								\
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU);		\
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
 									\
 	for (i = 10000; i; i--)						\
 		if (!(__raw_readl(CLKCTRL_BASE_ADDR +			\
@@ -483,7 +483,7 @@ static int name##_set_parent(struct clk *clk, struct clk *parent)	\
 {									\
 	if (parent != clk->parent) {					\
 		__raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit,		\
-			 HW_CLKCTRL_CLKSEQ_TOG);			\
+			 CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG);	\
 		clk->parent = parent;					\
 	}								\
 									\
@@ -609,7 +609,6 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("duart", NULL, uart_clk)
 	_REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk)
 	_REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk)
-	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
 	_REGISTER_CLOCK("rtc", NULL, rtc_clk)
 	_REGISTER_CLOCK("pll2", NULL, pll2_clk)
 	_REGISTER_CLOCK(NULL, "hclk", hbus_clk)

arch/arm/mach-mxs/clock.c

@@ -57,7 +57,6 @@ static void __clk_disable(struct clk *clk)
 		if (clk->disable)
 			clk->disable(clk);
 		__clk_disable(clk->parent);
-		__clk_disable(clk->secondary);
 	}
 }
 
@@ -68,7 +67,6 @@ static int __clk_enable(struct clk *clk)
 
 	if (clk->usecount++ == 0) {
 		__clk_enable(clk->parent);
-		__clk_enable(clk->secondary);
 
 		if (clk->enable)
 			clk->enable(clk);

arch/arm/mach-mxs/gpio.c

@@ -139,6 +139,8 @@ static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 	struct mxs_gpio_port *port = (struct mxs_gpio_port *)get_irq_data(irq);
 	u32 gpio_irq_no_base = port->virtual_irq_start;
 
+	desc->irq_data.chip->irq_ack(&desc->irq_data);
+
 	irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) &
 			__raw_readl(port->base + PINCTRL_IRQEN(port->id));
 

arch/arm/mach-mxs/include/mach/clock.h

@@ -29,8 +29,6 @@ struct clk {
 	int id;
 	/* Source clock this clk depends on */
 	struct clk *parent;
-	/* Secondary clock to enable/disable with this clock */
-	struct clk *secondary;
 	/* Reference count of clock enable/disable */
 	__s8 usecount;
 	/* Register bit position for clock's enable/disable control. */

arch/arm/mach-omap1/include/mach/entry-macro.S

@@ -14,19 +14,6 @@
 #include <mach/irqs.h>
 #include <asm/hardware/gic.h>
 
-/*
- * We use __glue to avoid errors with multiple definitions of
- * .globl omap_irq_flags as it's included from entry-armv.S but not
- * from entry-common.S.
- */
-#ifdef __glue
-		.pushsection .data
-		.globl	omap_irq_flags
-omap_irq_flags:
-		.word	0
-		.popsection
-#endif
-
  		.macro	disable_fiq
 		.endm
 

arch/arm/mach-omap1/irq.c

@@ -57,6 +57,7 @@ struct omap_irq_bank {
 	unsigned long wake_enable;
 };
 
+u32 omap_irq_flags;
 static unsigned int irq_bank_count;
 static struct omap_irq_bank *irq_banks;
 
@@ -176,7 +177,6 @@ static struct irq_chip omap_irq_chip = {
 
 void __init omap_init_irq(void)
 {
-	extern unsigned int omap_irq_flags;
 	int i, j;
 
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)

arch/arm/mach-omap1/lcd_dma.c

@@ -37,7 +37,7 @@ int omap_lcd_dma_running(void)
 	 * On OMAP1510, internal LCD controller will start the transfer
 	 * when it gets enabled, so assume DMA running if LCD enabled.
 	 */
-	if (cpu_is_omap1510())
+	if (cpu_is_omap15xx())
 		if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN)
 			return 1;
 
@@ -95,7 +95,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
 
 void omap_set_lcd_dma_b1_rotation(int rotate)
 {
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap15xx()) {
 		printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
 		BUG();
 		return;
@@ -106,7 +106,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
 
 void omap_set_lcd_dma_b1_mirror(int mirror)
 {
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap15xx()) {
 		printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
 		BUG();
 	}
@@ -116,7 +116,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
 
 void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
 {
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap15xx()) {
 		printk(KERN_ERR "DMA virtual resulotion is not supported "
 				"in 1510 mode\n");
 		BUG();
@@ -127,7 +127,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
 
 void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
 {
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap15xx()) {
 		printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
 		BUG();
 	}
@@ -177,7 +177,7 @@ static void set_b1_regs(void)
 			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
 			/* 1510 DMA requires the bottom address to be 2 more
 			 * than the actual last memory access location. */
-			if (cpu_is_omap1510() &&
+			if (cpu_is_omap15xx() &&
 				lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
 					bottom += 2;
 			ei = PIXSTEP(0, 0, 1, 0);
@@ -241,7 +241,7 @@ static void set_b1_regs(void)
 		return;	/* Suppress warning about uninitialized vars */
 	}
 
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap15xx()) {
 		omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
 		omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
 		omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
@@ -343,7 +343,7 @@ void omap_free_lcd_dma(void)
 		BUG();
 		return;
 	}
-	if (!cpu_is_omap1510())
+	if (!cpu_is_omap15xx())
 		omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
 			    OMAP1610_DMA_LCD_CCR);
 	lcd_dma.reserved = 0;
@@ -360,7 +360,7 @@ void omap_enable_lcd_dma(void)
 	 * connected. Otherwise the OMAP internal controller will
 	 * start the transfer when it gets enabled.
 	 */
-	if (cpu_is_omap1510() || !lcd_dma.ext_ctrl)
+	if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
 		return;
 
 	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
@@ -378,14 +378,14 @@ EXPORT_SYMBOL(omap_enable_lcd_dma);
 void omap_setup_lcd_dma(void)
 {
 	BUG_ON(lcd_dma.active);
-	if (!cpu_is_omap1510()) {
+	if (!cpu_is_omap15xx()) {
 		/* Set some reasonable defaults */
 		omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
 		omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
 		omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
 	}
 	set_b1_regs();
-	if (!cpu_is_omap1510()) {
+	if (!cpu_is_omap15xx()) {
 		u16 w;
 
 		w = omap_readw(OMAP1610_DMA_LCD_CCR);
@@ -407,7 +407,7 @@ void omap_stop_lcd_dma(void)
 	u16 w;
 
 	lcd_dma.active = 0;
-	if (cpu_is_omap1510() || !lcd_dma.ext_ctrl)
+	if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
 		return;
 
 	w = omap_readw(OMAP1610_DMA_LCD_CCR);

arch/arm/mach-omap1/time.c

@@ -44,7 +44,6 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/io.h>
-#include <linux/sched.h>
 
 #include <asm/system.h>
 #include <mach/hardware.h>

arch/arm/mach-omap2/board-devkit8000.c

@@ -115,9 +115,6 @@ static struct omap2_hsmmc_info mmc[] = {
 
 static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
 {
-	twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1);
-	twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
-
 	if (gpio_is_valid(dssdev->reset_gpio))
 		gpio_set_value_cansleep(dssdev->reset_gpio, 1);
 	return 0;
@@ -247,6 +244,8 @@ static struct gpio_led gpio_leds[];
 static int devkit8000_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
+	int ret;
+
 	omap_mux_init_gpio(29, OMAP_PIN_INPUT);
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
@@ -255,17 +254,23 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
-        /* gpio + 1 is "LCD_PWREN" (out, active high) */
-	devkit8000_lcd_device.reset_gpio = gpio + 1;
-	gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN");
-	/* Disable until needed */
-	gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0);
+	/* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
+	devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0;
+	ret = gpio_request_one(devkit8000_lcd_device.reset_gpio,
+			GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN");
+	if (ret < 0) {
+		devkit8000_lcd_device.reset_gpio = -EINVAL;
+		printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n");
+	}
 
 	/* gpio + 7 is "DVI_PD" (out, active low) */
 	devkit8000_dvi_device.reset_gpio = gpio + 7;
-	gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown");
-	/* Disable until needed */
-	gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0);
+	ret = gpio_request_one(devkit8000_dvi_device.reset_gpio,
+			GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown");
+	if (ret < 0) {
+		devkit8000_dvi_device.reset_gpio = -EINVAL;
+		printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n");
+	}
 
 	return 0;
 }

arch/arm/mach-omap2/board-omap4panda.c

@@ -409,8 +409,6 @@ static void __init omap4_panda_init(void)
 	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
 	omap_serial_init();
 	omap4_twl6030_hsmmc_init(mmc);
-	/* OMAP4 Panda uses internal transceiver so register nop transceiver */
-	usb_nop_xceiv_register();
 	omap4_ehci_init();
 	usb_musb_init(&musb_board_data);
 }

arch/arm/mach-omap2/board-rm680.c

@@ -40,9 +40,6 @@ static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
 static struct regulator_init_data rm680_vemmc = {
 	.constraints =	{
 		.name			= "rm680_vemmc",
-		.min_uV			= 2900000,
-		.max_uV			= 2900000,
-		.apply_uV		= 1,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask		= REGULATOR_CHANGE_STATUS

arch/arm/mach-omap2/dma.c

@@ -264,7 +264,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
 	if (IS_ERR(od)) {
 		pr_err("%s: Cant build omap_device for %s:%s.\n",
 			__func__, name, oh->name);
-		return IS_ERR(od);
+		return PTR_ERR(od);
 	}
 
 	mem = platform_get_resource(&od->pdev, IORESOURCE_MEM, 0);

arch/arm/mach-omap2/include/mach/entry-macro.S

@@ -38,20 +38,6 @@
  */
 
 #ifdef MULTI_OMAP2
-
-/*
- * We use __glue to avoid errors with multiple definitions of
- * .globl omap_irq_base as it's included from entry-armv.S but not
- * from entry-common.S.
- */
-#ifdef __glue
-		.pushsection .data
-		.globl	omap_irq_base
-omap_irq_base:
-		.word	0
-		.popsection
-#endif
-
 		/*
 		 * Configure the interrupt base on the first interrupt.
 		 * See also omap_irq_base_init for setting omap_irq_base.

arch/arm/mach-omap2/io.c

@@ -314,14 +314,13 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
 	return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
 }
 
+void __iomem *omap_irq_base;
+
 /*
  * Initialize asm_irq_base for entry-macro.S
  */
 static inline void omap_irq_base_init(void)
 {
-	extern void __iomem *omap_irq_base;
-
-#ifdef MULTI_OMAP2
 	if (cpu_is_omap24xx())
 		omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE);
 	else if (cpu_is_omap34xx())
@@ -330,7 +329,6 @@ static inline void omap_irq_base_init(void)
 		omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE);
 	else
 		pr_err("Could not initialize omap_irq_base\n");
-#endif
 }
 
 void __init omap2_init_common_infrastructure(void)

arch/arm/mach-omap2/mux.c

@@ -160,7 +160,7 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition,
 	struct omap_mux *mux = NULL;
 	struct omap_mux_entry *e;
 	const char *mode_name;
-	int found = 0, found_mode, mode0_len = 0;
+	int found = 0, found_mode = 0, mode0_len = 0;
 	struct list_head *muxmodes = &partition->muxmodes;
 
 	mode_name = strchr(muxname, '.');
@@ -1000,6 +1000,7 @@ int __init omap_mux_init(const char *name, u32 flags,
 	if (!partition->base) {
 		pr_err("%s: Could not ioremap mux partition at 0x%08x\n",
 			__func__, partition->phys);
+		kfree(partition);
 		return -ENODEV;
 	}
 

arch/arm/mach-omap2/pm24xx.c

@@ -134,7 +134,7 @@ static void omap2_enter_full_retention(void)
 
 	/* Block console output in case it is on one of the OMAP UARTs */
 	if (!is_suspending())
-		if (try_acquire_console_sem())
+		if (!console_trylock())
 			goto no_sleep;
 
 	omap_uart_prepare_idle(0);
@@ -151,7 +151,7 @@ static void omap2_enter_full_retention(void)
 	omap_uart_resume_idle(0);
 
 	if (!is_suspending())
-		release_console_sem();
+		console_unlock();
 
 no_sleep:
 	if (omap2_pm_debug) {

arch/arm/mach-omap2/pm34xx.c

@@ -168,9 +168,10 @@ static void omap3_core_restore_context(void)
  * once during boot sequence, but this works as we are not using secure
  * services.
  */
-static void omap3_save_secure_ram_context(u32 target_mpu_state)
+static void omap3_save_secure_ram_context(void)
 {
 	u32 ret;
+	int mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
 
 	if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
 		/*
@@ -181,7 +182,7 @@ static void omap3_save_secure_ram_context(u32 target_mpu_state)
 		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
 		ret = _omap_save_secure_sram((u32 *)
 				__pa(omap3_secure_ram_storage));
-		pwrdm_set_next_pwrst(mpu_pwrdm, target_mpu_state);
+		pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
 		/* Following is for error tracking, it should not happen */
 		if (ret) {
 			printk(KERN_ERR "save_secure_sram() returns %08x\n",
@@ -398,7 +399,7 @@ void omap_sram_idle(void)
 	if (!is_suspending())
 		if (per_next_state < PWRDM_POWER_ON ||
 		    core_next_state < PWRDM_POWER_ON)
-			if (try_acquire_console_sem())
+			if (!console_trylock())
 				goto console_still_active;
 
 	/* PER */
@@ -481,7 +482,7 @@ void omap_sram_idle(void)
 	}
 
 	if (!is_suspending())
-		release_console_sem();
+		console_unlock();
 
 console_still_active:
 	/* Disable IO-PAD and IO-CHAIN wakeup */
@@ -1094,7 +1095,7 @@ static int __init omap3_pm_init(void)
 		local_fiq_disable();
 
 		omap_dma_global_context_save();
-		omap3_save_secure_ram_context(PWRDM_POWER_ON);
+		omap3_save_secure_ram_context();
 		omap_dma_global_context_restore();
 
 		local_irq_enable();