dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

sisfb: add support for XGI Z9 DDR2 POST 

Add support for ZGI Z9 DDR2 POST. The init sequence is from XGI's
xgifb driver.

Tested with ARM board using a PCI card with XGI Z9s and 32 MB DDR2
memory. After a cold reset the POST succeeds.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This commit is contained in:
Aaro Koskinen 2011-02-13 22:11:28 +00:00 committed by Paul Mundt
parent c9982d59c5
commit 42dea903bf
1 changed files with 68 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

77
drivers/video/sis/sis_main.c
View File

@ -4982,6 +4982,48 @@ sisfb_post_xgi_ddr2_mrs_default(struct sis_video_info *ivideo, u8 regb)
sisfb_post_xgi_delay(ivideo, 1);
}
static void __devinit
sisfb_post_xgi_ddr2_mrs_xg21(struct sis_video_info *ivideo)
{
sisfb_post_xgi_setclocks(ivideo, 1);
SiS_SetReg(SISCR, 0x97, 0x11);
sisfb_post_xgi_delay(ivideo, 0x46);
SiS_SetReg(SISSR, 0x18, 0x00); /* EMRS2 */
SiS_SetReg(SISSR, 0x19, 0x80);
SiS_SetReg(SISSR, 0x16, 0x05);
SiS_SetReg(SISSR, 0x16, 0x85);
SiS_SetReg(SISSR, 0x18, 0x00); /* EMRS3 */
SiS_SetReg(SISSR, 0x19, 0xc0);
SiS_SetReg(SISSR, 0x16, 0x05);
SiS_SetReg(SISSR, 0x16, 0x85);
SiS_SetReg(SISSR, 0x18, 0x00); /* EMRS1 */
SiS_SetReg(SISSR, 0x19, 0x40);
SiS_SetReg(SISSR, 0x16, 0x05);
SiS_SetReg(SISSR, 0x16, 0x85);
SiS_SetReg(SISSR, 0x18, 0x42); /* MRS1 */
SiS_SetReg(SISSR, 0x19, 0x02);
SiS_SetReg(SISSR, 0x16, 0x05);
SiS_SetReg(SISSR, 0x16, 0x85);
sisfb_post_xgi_delay(ivideo, 1);
SiS_SetReg(SISSR, 0x1b, 0x04);
sisfb_post_xgi_delay(ivideo, 1);
SiS_SetReg(SISSR, 0x1b, 0x00);
sisfb_post_xgi_delay(ivideo, 1);
SiS_SetReg(SISSR, 0x18, 0x42); /* MRS1 */
SiS_SetReg(SISSR, 0x19, 0x00);
SiS_SetReg(SISSR, 0x16, 0x05);
SiS_SetReg(SISSR, 0x16, 0x85);
sisfb_post_xgi_delay(ivideo, 1);
}
static void __devinit
sisfb_post_xgi_ddr2(struct sis_video_info *ivideo, u8 regb)
{
@ -5000,6 +5042,7 @@ sisfb_post_xgi_ddr2(struct sis_video_info *ivideo, u8 regb)
u8 v2;
u8 v3;
SiS_SetReg(SISCR, 0xb0, 0x80); /* DDR2 dual frequency mode */
SiS_SetReg(SISCR, 0x82, 0x77);
SiS_SetReg(SISCR, 0x86, 0x00);
reg = SiS_GetReg(SISCR, 0x86);
@ -5021,7 +5064,10 @@ sisfb_post_xgi_ddr2(struct sis_video_info *ivideo, u8 regb)
SiS_SetReg(SISCR, 0x82, v3);
SiS_SetReg(SISCR, 0x98, 0x01);
SiS_SetReg(SISCR, 0x9a, 0x02);
sisfb_post_xgi_ddr2_default(ivideo, regb);
if (sisfb_xgi_is21(ivideo))
sisfb_post_xgi_ddr2_mrs_xg21(ivideo);
else
sisfb_post_xgi_ddr2_mrs_default(ivideo, regb);
}
static u8 __devinit
@ -5346,9 +5392,23 @@ sisfb_post_xgi(struct pci_dev *pdev)
SiS_SetReg(SISCR, 0x77, v1);
}
/* RAM type */
regb = 0; /* ! */
/* RAM type:
*
* 0 == DDR1, 1 == DDR2, 2..7 == reserved?
*
* The code seems to written so that regb should equal ramtype,
* however, so far it has been hardcoded to 0. Enable other values only
* on XGI Z9, as it passes the POST, and add a warning for others.
*/
ramtype = sisfb_post_xgi_ramtype(ivideo);
if (!sisfb_xgi_is21(ivideo) && ramtype) {
dev_warn(&pdev->dev,
"RAM type something else than expected: %d\n",
ramtype);
regb = 0;
} else {
regb = ramtype;
}
v1 = 0xff;
if(ivideo->haveXGIROM) {
@ -5500,7 +5560,10 @@ sisfb_post_xgi(struct pci_dev *pdev)
}
}
SiS_SetReg(SISSR, 0x17, 0x00);
if (regb == 1)
SiS_SetReg(SISSR, 0x17, 0x80); /* DDR2 */
else
SiS_SetReg(SISSR, 0x17, 0x00); /* DDR1 */
SiS_SetReg(SISSR, 0x1a, 0x87);
if(ivideo->chip == XGI_20) {
@ -5508,10 +5571,6 @@ sisfb_post_xgi(struct pci_dev *pdev)
SiS_SetReg(SISSR, 0x1c, 0x00);
}
ramtype = sisfb_post_xgi_ramtype(ivideo);
regb = 0; /* ! */
switch(ramtype) {
case 0:
sisfb_post_xgi_setclocks(ivideo, regb);