From 42859007f458f305624009862d6ca818e3c5be57 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Wed, 23 May 2007 14:50:18 -0700 Subject: [PATCH] [ARCNET]: Use menuconfig objects. Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/arcnet/Kconfig | 17 ++++------------- 1 file changed, 4 insertions(+), 13 deletions(-) diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig index 7284ccad0b9..4030274fe78 100644 --- a/drivers/net/arcnet/Kconfig +++ b/drivers/net/arcnet/Kconfig @@ -2,10 +2,8 @@ # Arcnet configuration # -menu "ARCnet devices" +menuconfig ARCNET depends on NETDEVICES && (ISA || PCI) - -config ARCNET tristate "ARCnet support" ---help--- If you have a network card of this type, say Y and check out the @@ -25,9 +23,10 @@ config ARCNET . The module will be called arcnet. +if ARCNET + config ARCNET_1201 tristate "Enable standard ARCNet packet format (RFC 1201)" - depends on ARCNET help This allows you to use RFC1201 with your ARCnet card via the virtual arc0 device. You need to say Y here to communicate with @@ -38,7 +37,6 @@ config ARCNET_1201 config ARCNET_1051 tristate "Enable old ARCNet packet format (RFC 1051)" - depends on ARCNET ---help--- This allows you to use RFC1051 with your ARCnet card via the virtual arc0s device. You only need arc0s if you want to talk to ARCnet @@ -53,7 +51,6 @@ config ARCNET_1051 config ARCNET_RAW tristate "Enable raw mode packet interface" - depends on ARCNET help ARCnet "raw mode" packet encapsulation, no soft headers. Unlikely to work unless talking to a copy of the same Linux arcnet driver, @@ -61,7 +58,6 @@ config ARCNET_RAW config ARCNET_CAP tristate "Enable CAP mode packet interface" - depends on ARCNET help ARCnet "cap mode" packet encapsulation. Used to get the hardware acknowledge back to userspace. After the initial protocol byte every @@ -80,7 +76,6 @@ config ARCNET_CAP config ARCNET_COM90xx tristate "ARCnet COM90xx (normal) chipset driver" - depends on ARCNET help This is the chipset driver for the standard COM90xx cards. If you have always used the old ARCnet driver without knowing what type of @@ -92,7 +87,6 @@ config ARCNET_COM90xx config ARCNET_COM90xxIO tristate "ARCnet COM90xx (IO mapped) chipset driver" - depends on ARCNET ---help--- This is the chipset driver for the COM90xx cards, using them in IO-mapped mode instead of memory-mapped mode. This is slower than @@ -105,7 +99,6 @@ config ARCNET_COM90xxIO config ARCNET_RIM_I tristate "ARCnet COM90xx (RIM I) chipset driver" - depends on ARCNET ---help--- This is yet another chipset driver for the COM90xx cards, but this time only using memory-mapped mode, and no IO ports at all. This @@ -118,7 +111,6 @@ config ARCNET_RIM_I config ARCNET_COM20020 tristate "ARCnet COM20020 chipset driver" - depends on ARCNET help This is the driver for the new COM20020 chipset. It supports such things as promiscuous mode, so packet sniffing is possible, and @@ -136,5 +128,4 @@ config ARCNET_COM20020_PCI tristate "Support for COM20020 on PCI" depends on ARCNET_COM20020 && PCI -endmenu - +endif # ARCNET