dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

i2c-algo-bit: Implement a 50/50 SCL duty cycle 

The original i2c-algo-bit implementation uses a 33/66 SCL duty cycle
when bits are being written on the bus. While the I2C specification
doesn't forbid it, this prevents us from driving the I2C bus to its
max speed, limiting us to 66 kbps max on standard I2C busses.

Implementing a 50/50 duty cycle instead lets us max out the bandwidth
up to the theoretical max of 100 kbps on standard I2C busses. This is
particularly important when large amounts of data need to be transfered
over the bus, as is the case with some TV adapters when the firmware is
being uploaded.

In fact this change even allows, at least in theory, fast-mode I2C
support at 125, 166 and 250 kbps. There's no way to reach the
theoretical max of 400 kbps with this implementation. But I don't
think we want to put efforts in that direction anyway: software-driven
I2C is very CPU-intensive and bad for latency.

Other timing changes:
* Don't set SDA high explicitly on error, we're going to issue a stop
  condition before we leave anyway.
* If an error occurs when sending the slave address, yield the CPU
  before retrying, and remove the additional delay after the new start
  condition.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
This commit is contained in:
Jean Delvare 2007-05-01 23:26:33 +02:00 committed by Jean Delvare
parent 7c17549982
commit 424ed67c7d
2 changed files with 26 additions and 22 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

42
drivers/i2c/algos/i2c-algo-bit.c
View File

@ -57,19 +57,19 @@ static int bit_test; /* see if the line-setting functions work */
static inline void sdalo(struct i2c_algo_bit_data *adap)
{
setsda(adap,0);
udelay(adap->udelay);
udelay((adap->udelay + 1) / 2);
}
static inline void sdahi(struct i2c_algo_bit_data *adap)
{
setsda(adap,1);
udelay(adap->udelay);
udelay((adap->udelay + 1) / 2);
}
static inline void scllo(struct i2c_algo_bit_data *adap)
{
setscl(adap,0);
udelay(adap->udelay);
udelay(adap->udelay / 2);
}
/*
@ -111,18 +111,19 @@ static void i2c_start(struct i2c_algo_bit_data *adap)
{
/* assert: scl, sda are high */
DEBPROTO(printk("S "));
sdalo(adap);
setsda(adap, 0);
udelay(adap->udelay);
scllo(adap);
}
static void i2c_repstart(struct i2c_algo_bit_data *adap)
{
/* scl, sda may not be high */
/* assert: scl is low */
DEBPROTO(printk(" Sr "));
setsda(adap,1);
sdahi(adap);
sclhi(adap);
sdalo(adap);
setsda(adap, 0);
udelay(adap->udelay);
scllo(adap);
}
@ -133,7 +134,8 @@ static void i2c_stop(struct i2c_algo_bit_data *adap)
/* assert: scl is low */
sdalo(adap);
sclhi(adap);
sdahi(adap);
setsda(adap, 1);
udelay(adap->udelay);
}
@ -156,18 +158,16 @@ static int i2c_outb(struct i2c_adapter *i2c_adap, char c)
for ( i=7 ; i>=0 ; i-- ) {
sb = c & ( 1 << i );
setsda(adap,sb);
udelay(adap->udelay);
udelay((adap->udelay + 1) / 2);
DEBPROTO(printk(KERN_DEBUG "%d",sb!=0));
if (sclhi(adap)<0) { /* timed out */
sdahi(adap); /* we don't want to block the net */
DEB2(printk(KERN_DEBUG " i2c_outb: 0x%02x, timeout at bit #%d\n", c&0xff, i));
return -ETIMEDOUT;
};
/* do arbitration here:
* if ( sb && ! getsda(adap) ) -> ouch! Get out of here.
*/
setscl(adap, 0 );
udelay(adap->udelay);
scllo(adap);
}
sdahi(adap);
if (sclhi(adap)<0){ /* timeout */
@ -204,7 +204,8 @@ static int i2c_inb(struct i2c_adapter *i2c_adap)
indata *= 2;
if ( getsda(adap) )
indata |= 0x01;
scllo(adap);
setscl(adap, 0);
udelay(i == 7 ? adap->udelay / 2 : adap->udelay);
}
/* assert: scl is low */
DEB2(printk(KERN_DEBUG "i2c_inb: 0x%02x\n", indata & 0xff));
@ -315,9 +316,9 @@ static int try_address(struct i2c_adapter *i2c_adap,
if (ret == 1 || i == retries)
break;
i2c_stop(adap);
udelay(5/*adap->udelay*/);
i2c_start(adap);
udelay(adap->udelay);
yield();
i2c_start(adap);
}
DEB2(if (i)
printk(KERN_DEBUG "i2c-algo-bit.o: Used %d tries to %s client at 0x%02x : %s\n",
@ -377,20 +378,21 @@ static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
if (msg->flags & I2C_M_NO_RD_ACK)
continue;
/* assert: sda is high */
if ( count > 0 ) { /* send ack */
sdalo(adap);
setsda(adap, 0);
udelay((adap->udelay + 1) / 2);
DEBPROTO(printk(" Am "));
} else {
sdahi(adap); /* neg. ack on last byte */
/* neg. ack on last byte */
udelay((adap->udelay + 1) / 2);
DEBPROTO(printk(" NAm "));
}
if (sclhi(adap)<0) { /* timeout */
sdahi(adap);
printk(KERN_ERR "i2c-algo-bit.o: readbytes: Timeout at ack\n");
return -ETIMEDOUT;
};
scllo(adap);
sdahi(adap);
/* Some SMBus transactions require that we receive the
transaction length as the first read byte. */

6
include/linux/i2c-algo-bit.h
View File

@ -38,8 +38,10 @@ struct i2c_algo_bit_data {
int (*getscl) (void *data);
/* local settings */
int udelay; /* half-clock-cycle time in microsecs */
/* i.e. clock is (500 / udelay) KHz */
int udelay; /* half clock cycle time in us,
minimum 2 us for fast-mode I2C,
minimum 5 us for standard-mode I2C and SMBus,
maximum 50 us for SMBus */
int timeout; /* in jiffies */
};