[media] anysee: reimplement demod and tuner attach
Use board ID as base value when selecting correct hardware configuration. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Antti Palosaari
Mauro Carvalho Chehab
parent
592d9e21f5
commit
41f81f686a
|
|
@ -105,6 +105,27 @@ static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val)
|
|||
return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
|
||||
}
|
||||
|
||||
/* write single register with mask */
|
||||
static int anysee_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val,
|
||||
u8 mask)
|
||||
{
|
||||
int ret;
|
||||
u8 tmp;
|
||||
|
||||
/* no need for read if whole reg is written */
|
||||
if (mask != 0xff) {
|
||||
ret = anysee_read_reg(d, reg, &tmp);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
val &= mask;
|
||||
tmp &= ~mask;
|
||||
val |= tmp;
|
||||
}
|
||||
|
||||
return anysee_write_reg(d, reg, val);
|
||||
}
|
||||
|
||||
static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id)
|
||||
{
|
||||
u8 buf[] = {CMD_GET_HW_INFO};
|
||||
|
|
@ -244,134 +265,241 @@ static struct zl10353_config anysee_zl10353_config = {
|
|||
.parallel_ts = 1,
|
||||
};
|
||||
|
||||
/*
|
||||
* New USB device strings: Mfr=1, Product=2, SerialNumber=0
|
||||
* Manufacturer: AMT.CO.KR
|
||||
*
|
||||
* E30 VID=04b4 PID=861f HW=2 FW=2.1 Product=????????
|
||||
* PCB: ?
|
||||
* parts: MT352, DTT7579(?), DNOS404ZH102A NIM
|
||||
*
|
||||
* E30 VID=04b4 PID=861f HW=2 FW=2.1 Product=????????
|
||||
* PCB: ?
|
||||
* parts: ZL10353, DTT7579(?), DNOS404ZH103A NIM
|
||||
*
|
||||
* E30 Plus VID=04b4 PID=861f HW=6 FW=1.0 "anysee"
|
||||
* PCB: 507CD (rev1.1)
|
||||
* parts: ZL10353, DTT7579(?), CST56I01, DNOS404ZH103A NIM
|
||||
* OEA=80 OEB=00 OEC=00 OED=ff OEF=fe
|
||||
* IOD[0] ZL10353 1=enabled
|
||||
* IOA[7] TS 0=enabled
|
||||
* tuner is not behind ZL10353 I2C-gate (no care if gate disabled or not)
|
||||
*
|
||||
* E30 C Plus VID=04b4 PID=861f HW=10 FW=1.0 "anysee-DC(LP)"
|
||||
* PCB: 507DC (rev0.2)
|
||||
* parts: TDA10023, CST56I01, DTOS403IH102B TM
|
||||
* OEA=80 OEB=00 OEC=00 OED=ff OEF=fe
|
||||
* IOD[0] TDA10023 1=enabled
|
||||
*
|
||||
* E30 C Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
|
||||
* PCB: 507FA (rev0.4)
|
||||
* parts: TDA10023, TDA8024, DTOS403IH102B TM
|
||||
* OEA=80 OEB=00 OEC=ff OED=ff OEF=ff
|
||||
* IOD[5] TDA10023 1=enabled
|
||||
* IOE[0] tuner 1=enabled
|
||||
*
|
||||
* E30 Combo Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
|
||||
* PCB: 507FA (rev1.1)
|
||||
* parts: ZL10353, TDA10023, TDA8024, DTOS403IH102B TM
|
||||
* OEA=80 OEB=00 OEC=ff OED=ff OEF=ff
|
||||
* DVB-C:
|
||||
* IOD[5] TDA10023 1=enabled
|
||||
* IOE[0] tuner 1=enabled
|
||||
* DVB-T:
|
||||
* IOD[0] ZL10353 1=enabled
|
||||
* IOE[0] tuner 0=enabled
|
||||
* tuner is behind ZL10353 I2C-gate
|
||||
*/
|
||||
|
||||
static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
|
||||
{
|
||||
int ret;
|
||||
struct anysee_state *state = adap->dev->priv;
|
||||
u8 hw_info[3];
|
||||
u8 io_d; /* IO port D */
|
||||
|
||||
/* check which hardware we have
|
||||
We must do this call two times to get reliable values (hw bug). */
|
||||
/* Check which hardware we have.
|
||||
* We must do this call two times to get reliable values (hw bug).
|
||||
*/
|
||||
ret = anysee_get_hw_info(adap->dev, hw_info);
|
||||
if (ret)
|
||||
return ret;
|
||||
goto error;
|
||||
|
||||
ret = anysee_get_hw_info(adap->dev, hw_info);
|
||||
if (ret)
|
||||
return ret;
|
||||
goto error;
|
||||
|
||||
/* Meaning of these info bytes are guessed. */
|
||||
info("firmware version:%d.%d hardware id:%d",
|
||||
hw_info[1], hw_info[2], hw_info[0]);
|
||||
|
||||
ret = anysee_read_reg(adap->dev, 0xb0, &io_d); /* IO port D */
|
||||
if (ret)
|
||||
return ret;
|
||||
deb_info("%s: IO port D:%02x\n", __func__, io_d);
|
||||
state->hw = hw_info[0];
|
||||
|
||||
/* Select demod using trial and error method. */
|
||||
switch (state->hw) {
|
||||
case ANYSEE_HW_02: /* 2 */
|
||||
/* E30 */
|
||||
|
||||
/* Try to attach demodulator in following order:
|
||||
model demod hw fw
|
||||
1. E30 MT352 02 2.1
|
||||
2. E30 ZL10353 02 2.1
|
||||
3. E30 Combo ZL10353 0f 1.2 DVB-T/C combo
|
||||
4. E30 Plus ZL10353 06 1.0
|
||||
5. E30C Plus TDA10023 0a 1.0 rev 0.2
|
||||
E30C Plus TDA10023 0f 1.2 rev 0.4
|
||||
E30 Combo TDA10023 0f 1.2 DVB-T/C combo
|
||||
*/
|
||||
/* attach demod */
|
||||
adap->fe = dvb_attach(mt352_attach, &anysee_mt352_config,
|
||||
&adap->dev->i2c_adap);
|
||||
if (adap->fe)
|
||||
break;
|
||||
|
||||
/* Zarlink MT352 DVB-T demod inside of Samsung DNOS404ZH102A NIM */
|
||||
adap->fe = dvb_attach(mt352_attach, &anysee_mt352_config,
|
||||
&adap->dev->i2c_adap);
|
||||
if (adap->fe != NULL) {
|
||||
state->tuner = DVB_PLL_THOMSON_DTT7579;
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */
|
||||
adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
|
||||
&adap->dev->i2c_adap);
|
||||
if (adap->fe != NULL) {
|
||||
state->tuner = DVB_PLL_THOMSON_DTT7579;
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* for E30 Combo Plus DVB-T demodulator */
|
||||
if (dvb_usb_anysee_delsys) {
|
||||
ret = anysee_write_reg(adap->dev, 0xb0, 0x01);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/* Zarlink ZL10353 DVB-T demod */
|
||||
/* attach demod */
|
||||
adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
|
||||
&adap->dev->i2c_adap);
|
||||
if (adap->fe != NULL) {
|
||||
state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A;
|
||||
return 0;
|
||||
&adap->dev->i2c_adap);
|
||||
if (adap->fe)
|
||||
break;
|
||||
|
||||
break;
|
||||
case ANYSEE_HW_507CD: /* 6 */
|
||||
/* E30 Plus */
|
||||
|
||||
/* enable DVB-T demod on IOD[0] */
|
||||
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
|
||||
if (ret)
|
||||
goto error;
|
||||
|
||||
/* enable transport stream on IOA[7] */
|
||||
ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (0 << 7), 0x80);
|
||||
if (ret)
|
||||
goto error;
|
||||
|
||||
/* attach demod */
|
||||
adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
|
||||
&adap->dev->i2c_adap);
|
||||
if (adap->fe)
|
||||
break;
|
||||
|
||||
break;
|
||||
case ANYSEE_HW_507DC: /* 10 */
|
||||
/* E30 C Plus */
|
||||
|
||||
/* enable DVB-C demod on IOD[0] */
|
||||
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
|
||||
if (ret)
|
||||
goto error;
|
||||
|
||||
/* attach demod */
|
||||
adap->fe = dvb_attach(tda10023_attach, &anysee_tda10023_config,
|
||||
&adap->dev->i2c_adap, 0x48);
|
||||
if (adap->fe)
|
||||
break;
|
||||
|
||||
break;
|
||||
case ANYSEE_HW_507FA: /* 15 */
|
||||
/* E30 Combo Plus */
|
||||
/* E30 C Plus */
|
||||
|
||||
if (dvb_usb_anysee_delsys) {
|
||||
/* disable DVB-C demod on IOD[5] */
|
||||
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
|
||||
0x20);
|
||||
if (ret)
|
||||
goto error;
|
||||
|
||||
/* enable DVB-T demod on IOD[0] */
|
||||
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0),
|
||||
0x01);
|
||||
if (ret)
|
||||
goto error;
|
||||
|
||||
/* attach demod */
|
||||
adap->fe = dvb_attach(zl10353_attach,
|
||||
&anysee_zl10353_config, &adap->dev->i2c_adap);
|
||||
if (adap->fe)
|
||||
break;
|
||||
} else {
|
||||
/* disable DVB-T demod on IOD[0] */
|
||||
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 0),
|
||||
0x01);
|
||||
if (ret)
|
||||
goto error;
|
||||
|
||||
/* enable DVB-C demod on IOD[5] */
|
||||
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
|
||||
0x20);
|
||||
if (ret)
|
||||
goto error;
|
||||
|
||||
/* attach demod */
|
||||
adap->fe = dvb_attach(tda10023_attach,
|
||||
&anysee_tda10023_config, &adap->dev->i2c_adap,
|
||||
0x48);
|
||||
if (adap->fe)
|
||||
break;
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
/* connect demod on IO port D for TDA10023 & ZL10353 */
|
||||
ret = anysee_write_reg(adap->dev, 0xb0, 0x25);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */
|
||||
adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
|
||||
&adap->dev->i2c_adap);
|
||||
if (adap->fe != NULL) {
|
||||
state->tuner = DVB_PLL_THOMSON_DTT7579;
|
||||
return 0;
|
||||
if (!adap->fe) {
|
||||
/* we have no frontend :-( */
|
||||
ret = -ENODEV;
|
||||
err("Unknown Anysee version: %02x %02x %02x. " \
|
||||
"Please report the <linux-media@vger.kernel.org>.",
|
||||
hw_info[0], hw_info[1], hw_info[2]);
|
||||
}
|
||||
|
||||
/* IO port E - E30C rev 0.4 board requires this */
|
||||
ret = anysee_write_reg(adap->dev, 0xb1, 0xa7);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/* Philips TDA10023 DVB-C demod */
|
||||
adap->fe = dvb_attach(tda10023_attach, &anysee_tda10023_config,
|
||||
&adap->dev->i2c_adap, 0x48);
|
||||
if (adap->fe != NULL) {
|
||||
state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A;
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* return IO port D to init value for safe */
|
||||
ret = anysee_write_reg(adap->dev, 0xb0, io_d);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
err("Unknown Anysee version: %02x %02x %02x. " \
|
||||
"Please report the <linux-media@vger.kernel.org>.",
|
||||
hw_info[0], hw_info[1], hw_info[2]);
|
||||
|
||||
return -ENODEV;
|
||||
error:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
|
||||
{
|
||||
struct anysee_state *state = adap->dev->priv;
|
||||
int ret = 0;
|
||||
deb_info("%s:\n", __func__);
|
||||
|
||||
switch (state->tuner) {
|
||||
case DVB_PLL_THOMSON_DTT7579:
|
||||
/* Thomson dtt7579 (not sure) PLL inside of:
|
||||
Samsung DNOS404ZH102A NIM
|
||||
Samsung DNOS404ZH103A NIM */
|
||||
switch (state->hw) {
|
||||
case ANYSEE_HW_02: /* 2 */
|
||||
/* E30 */
|
||||
|
||||
/* attach tuner */
|
||||
dvb_attach(dvb_pll_attach, adap->fe, (0xc2 >> 1),
|
||||
NULL, DVB_PLL_THOMSON_DTT7579);
|
||||
break;
|
||||
case DVB_PLL_SAMSUNG_DTOS403IH102A:
|
||||
/* Unknown PLL inside of Samsung DTOS403IH102A tuner module */
|
||||
case ANYSEE_HW_507CD: /* 6 */
|
||||
/* E30 Plus */
|
||||
|
||||
/* attach tuner */
|
||||
dvb_attach(dvb_pll_attach, adap->fe, (0xc2 >> 1),
|
||||
&adap->dev->i2c_adap, DVB_PLL_THOMSON_DTT7579);
|
||||
|
||||
break;
|
||||
case ANYSEE_HW_507DC: /* 10 */
|
||||
/* E30 C Plus */
|
||||
|
||||
/* attach tuner */
|
||||
dvb_attach(dvb_pll_attach, adap->fe, (0xc0 >> 1),
|
||||
&adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A);
|
||||
break;
|
||||
case ANYSEE_HW_507FA: /* 15 */
|
||||
/* E30 Combo Plus */
|
||||
/* E30 C Plus */
|
||||
|
||||
if (dvb_usb_anysee_delsys) {
|
||||
/* enable DVB-T tuner on IOE[0] */
|
||||
ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 0),
|
||||
0x01);
|
||||
if (ret)
|
||||
goto error;
|
||||
} else {
|
||||
/* enable DVB-C tuner on IOE[0] */
|
||||
ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 0),
|
||||
0x01);
|
||||
if (ret)
|
||||
goto error;
|
||||
}
|
||||
|
||||
/* attach tuner */
|
||||
dvb_attach(dvb_pll_attach, adap->fe, (0xc0 >> 1),
|
||||
&adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A);
|
||||
|
||||
break;
|
||||
default:
|
||||
ret = -ENODEV;
|
||||
}
|
||||
|
||||
return 0;
|
||||
error:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int anysee_rc_query(struct dvb_usb_device *d)
|
||||
|
|
|
|||
|
|
@ -57,10 +57,27 @@ enum cmd {
|
|||
};
|
||||
|
||||
struct anysee_state {
|
||||
u8 tuner;
|
||||
u8 hw; /* PCB ID */
|
||||
u8 seq;
|
||||
};
|
||||
|
||||
#define ANYSEE_HW_02 2 /* E30 */
|
||||
#define ANYSEE_HW_507CD 6 /* E30 Plus */
|
||||
#define ANYSEE_HW_507DC 10 /* E30 C Plus */
|
||||
#define ANYSEE_HW_507SI 11 /* E30 S2 Plus */
|
||||
#define ANYSEE_HW_507FA 15 /* E30 Combo Plus / E30 C Plus */
|
||||
|
||||
#define REG_IOA 0x80 /* Port A (bit addressable) */
|
||||
#define REG_IOB 0x90 /* Port B (bit addressable) */
|
||||
#define REG_IOC 0xa0 /* Port C (bit addressable) */
|
||||
#define REG_IOD 0xb0 /* Port D (bit addressable) */
|
||||
#define REG_IOE 0xb1 /* Port E (NOT bit addressable) */
|
||||
#define REG_OEA 0xb2 /* Port A Output Enable */
|
||||
#define REG_OEB 0xb3 /* Port B Output Enable */
|
||||
#define REG_OEC 0xb4 /* Port C Output Enable */
|
||||
#define REG_OED 0xb5 /* Port D Output Enable */
|
||||
#define REG_OEE 0xb6 /* Port E Output Enable */
|
||||
|
||||
#endif
|
||||
|
||||
/***************************************************************************
|
||||
|
|
|
|||
Reference in New Issue