dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

omap2+: Add struct omap_board_data and use it for platform level serial init 

This is needed to pass board specific data such as pads used to the
platform level driver init code.

Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Tony Lindgren 2010-12-22 18:42:35 -08:00
parent 8d9af88f55
commit 40e4439930
3 changed files with 38 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
arch/arm/mach-omap2/mux.h
View File

@ -86,6 +86,20 @@
#define OMAP_MUX_REG_8BIT (1 << 0)
#define OMAP_MUX_GPIO_IN_MODE3 (1 << 1)
/**
* struct omap_board_data - board specific device data
* @id: instance id
* @flags: additional flags for platform init code
* @pads: array of device specific pads
* @pads_cnt: ARRAY_SIZE() of pads
*/
struct omap_board_data {
int id;
u32 flags;
struct omap_device_pad *pads;
int pads_cnt;
};
/**
* struct mux_partition - contain partition related information
* @name: name of the current partition

28
arch/arm/mach-omap2/serial.c
View File

@ -45,6 +45,7 @@
#include "cm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
#include "control.h"
#include "mux.h"
#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52
#define UART_OMAP_WER 0x17 /* Wake-up enable register */
@ -694,16 +695,16 @@ void __init omap_serial_early_init(void)
/**
* omap_serial_init_port() - initialize single serial port
* @port: serial port number (0-3)
* @bdata: port specific board data pointer
*
* This function initialies serial driver for given @port only.
* This function initialies serial driver for given port only.
* Platforms can call this function instead of omap_serial_init()
* if they don't plan to use all available UARTs as serial ports.
*
* Don't mix calls to omap_serial_init_port() and omap_serial_init(),
* use only one of the two.
*/
void __init omap_serial_init_port(int port)
void __init omap_serial_init_port(struct omap_board_data *bdata)
{
struct omap_uart_state *uart;
struct omap_hwmod *oh;
@ -721,13 +722,15 @@ void __init omap_serial_init_port(int port)
struct omap_uart_port_info omap_up;
#endif
if (WARN_ON(port < 0))
if (WARN_ON(!bdata))
return;
if (WARN_ON(port >= num_uarts))
if (WARN_ON(bdata->id < 0))
return;
if (WARN_ON(bdata->id >= num_uarts))
return;
list_for_each_entry(uart, &uart_list, node)
if (port == uart->num)
if (bdata->id == uart->num)
break;
oh = uart->oh;
@ -799,6 +802,8 @@ void __init omap_serial_init_port(int port)
WARN(IS_ERR(od), "Could not build omap_device for %s: %s.\n",
name, oh->name);
oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
uart->irq = oh->mpu_irqs[0].irq;
uart->regshift = 2;
uart->mapbase = oh->slaves[0]->addr->pa_start;
@ -856,7 +861,14 @@ void __init omap_serial_init_port(int port)
void __init omap_serial_init(void)
{
struct omap_uart_state *uart;
struct omap_board_data bdata;
list_for_each_entry(uart, &uart_list, node)
omap_serial_init_port(uart->num);
list_for_each_entry(uart, &uart_list, node) {
bdata.id = uart->num;
bdata.flags = 0;
bdata.pads = NULL;
bdata.pads_cnt = 0;
omap_serial_init_port(&bdata);
}
}

5
arch/arm/plat-omap/include/plat/serial.h
View File

@ -93,9 +93,12 @@
})
#ifndef __ASSEMBLER__
struct omap_board_data;
extern void __init omap_serial_early_init(void);
extern void omap_serial_init(void);
extern void omap_serial_init_port(int port);
extern void omap_serial_init_port(struct omap_board_data *bdata);
extern int omap_uart_can_sleep(void);
extern void omap_uart_check_wakeup(void);
extern void omap_uart_prepare_suspend(void);