drivers/misc/isl29003.c: driver for the ISL29003 ambient light sensor
Add a driver for Intersil's ISL29003 ambient light sensor device plus some documentation. Inspired by tsl2550.c, a driver for a similar device. It is put in drivers/misc for now until the industrial I/O framework gets merged. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Daniel Mack
Linus Torvalds
parent
891f7d73ea
commit
3cdbbeebb7
|
|
@ -0,0 +1,62 @@
|
|||
Kernel driver isl29003
|
||||
=====================
|
||||
|
||||
Supported chips:
|
||||
* Intersil ISL29003
|
||||
Prefix: 'isl29003'
|
||||
Addresses scanned: none
|
||||
Datasheet:
|
||||
http://www.intersil.com/data/fn/fn7464.pdf
|
||||
|
||||
Author: Daniel Mack <daniel@caiaq.de>
|
||||
|
||||
|
||||
Description
|
||||
-----------
|
||||
The ISL29003 is an integrated light sensor with a 16-bit integrating type
|
||||
ADC, I2C user programmable lux range select for optimized counts/lux, and
|
||||
I2C multi-function control and monitoring capabilities. The internal ADC
|
||||
provides 16-bit resolution while rejecting 50Hz and 60Hz flicker caused by
|
||||
artificial light sources.
|
||||
|
||||
The driver allows to set the lux range, the bit resolution, the operational
|
||||
mode (see below) and the power state of device and can read the current lux
|
||||
value, of course.
|
||||
|
||||
|
||||
Detection
|
||||
---------
|
||||
|
||||
The ISL29003 does not have an ID register which could be used to identify
|
||||
it, so the detection routine will just try to read from the configured I2C
|
||||
addess and consider the device to be present as soon as it ACKs the
|
||||
transfer.
|
||||
|
||||
|
||||
Sysfs entries
|
||||
-------------
|
||||
|
||||
range:
|
||||
0: 0 lux to 1000 lux (default)
|
||||
1: 0 lux to 4000 lux
|
||||
2: 0 lux to 16,000 lux
|
||||
3: 0 lux to 64,000 lux
|
||||
|
||||
resolution:
|
||||
0: 2^16 cycles (default)
|
||||
1: 2^12 cycles
|
||||
2: 2^8 cycles
|
||||
3: 2^4 cycles
|
||||
|
||||
mode:
|
||||
0: diode1's current (unsigned 16bit) (default)
|
||||
1: diode1's current (unsigned 16bit)
|
||||
2: difference between diodes (l1 - l2, signed 15bit)
|
||||
|
||||
power_state:
|
||||
0: device is disabled (default)
|
||||
1: device is enabled
|
||||
|
||||
lux (read only):
|
||||
returns the value from the last sensor reading
|
||||
|
||||
|
|
@ -223,6 +223,16 @@ config DELL_LAPTOP
|
|||
This driver adds support for rfkill and backlight control to Dell
|
||||
laptops.
|
||||
|
||||
config ISL29003
|
||||
tristate "Intersil ISL29003 ambient light sensor"
|
||||
depends on I2C && SYSFS
|
||||
help
|
||||
If you say yes here you get support for the Intersil ISL29003
|
||||
ambient light sensor.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called isl29003.
|
||||
|
||||
source "drivers/misc/c2port/Kconfig"
|
||||
source "drivers/misc/eeprom/Kconfig"
|
||||
|
||||
|
|
|
|||
|
|
@ -18,5 +18,6 @@ obj-$(CONFIG_KGDB_TESTS) += kgdbts.o
|
|||
obj-$(CONFIG_SGI_XP) += sgi-xp/
|
||||
obj-$(CONFIG_SGI_GRU) += sgi-gru/
|
||||
obj-$(CONFIG_HP_ILO) += hpilo.o
|
||||
obj-$(CONFIG_ISL29003) += isl29003.o
|
||||
obj-$(CONFIG_C2PORT) += c2port/
|
||||
obj-y += eeprom/
|
||||
|
|
|
|||
|
|
@ -0,0 +1,470 @@
|
|||
/*
|
||||
* isl29003.c - Linux kernel module for
|
||||
* Intersil ISL29003 ambient light sensor
|
||||
*
|
||||
* See file:Documentation/misc-devices/isl29003
|
||||
*
|
||||
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
|
||||
*
|
||||
* Based on code written by
|
||||
* Rodolfo Giometti <giometti@linux.it>
|
||||
* Eurotech S.p.A. <info@eurotech.it>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/delay.h>
|
||||
|
||||
#define ISL29003_DRV_NAME "isl29003"
|
||||
#define DRIVER_VERSION "1.0"
|
||||
|
||||
#define ISL29003_REG_COMMAND 0x00
|
||||
#define ISL29003_ADC_ENABLED (1 << 7)
|
||||
#define ISL29003_ADC_PD (1 << 6)
|
||||
#define ISL29003_TIMING_INT (1 << 5)
|
||||
#define ISL29003_MODE_SHIFT (2)
|
||||
#define ISL29003_MODE_MASK (0x3 << ISL29003_MODE_SHIFT)
|
||||
#define ISL29003_RES_SHIFT (0)
|
||||
#define ISL29003_RES_MASK (0x3 << ISL29003_RES_SHIFT)
|
||||
|
||||
#define ISL29003_REG_CONTROL 0x01
|
||||
#define ISL29003_INT_FLG (1 << 5)
|
||||
#define ISL29003_RANGE_SHIFT (2)
|
||||
#define ISL29003_RANGE_MASK (0x3 << ISL29003_RANGE_SHIFT)
|
||||
#define ISL29003_INT_PERSISTS_SHIFT (0)
|
||||
#define ISL29003_INT_PERSISTS_MASK (0xf << ISL29003_INT_PERSISTS_SHIFT)
|
||||
|
||||
#define ISL29003_REG_IRQ_THRESH_HI 0x02
|
||||
#define ISL29003_REG_IRQ_THRESH_LO 0x03
|
||||
#define ISL29003_REG_LSB_SENSOR 0x04
|
||||
#define ISL29003_REG_MSB_SENSOR 0x05
|
||||
#define ISL29003_REG_LSB_TIMER 0x06
|
||||
#define ISL29003_REG_MSB_TIMER 0x07
|
||||
|
||||
#define ISL29003_NUM_CACHABLE_REGS 4
|
||||
|
||||
struct isl29003_data {
|
||||
struct i2c_client *client;
|
||||
struct mutex lock;
|
||||
u8 reg_cache[ISL29003_NUM_CACHABLE_REGS];
|
||||
};
|
||||
|
||||
static int gain_range[] = {
|
||||
1000, 4000, 16000, 64000
|
||||
};
|
||||
|
||||
/*
|
||||
* register access helpers
|
||||
*/
|
||||
|
||||
static int __isl29003_read_reg(struct i2c_client *client,
|
||||
u32 reg, u8 mask, u8 shift)
|
||||
{
|
||||
struct isl29003_data *data = i2c_get_clientdata(client);
|
||||
return (data->reg_cache[reg] & mask) >> shift;
|
||||
}
|
||||
|
||||
static int __isl29003_write_reg(struct i2c_client *client,
|
||||
u32 reg, u8 mask, u8 shift, u8 val)
|
||||
{
|
||||
struct isl29003_data *data = i2c_get_clientdata(client);
|
||||
int ret = 0;
|
||||
u8 tmp;
|
||||
|
||||
if (reg >= ISL29003_NUM_CACHABLE_REGS)
|
||||
return -EINVAL;
|
||||
|
||||
mutex_lock(&data->lock);
|
||||
|
||||
tmp = data->reg_cache[reg];
|
||||
tmp &= ~mask;
|
||||
tmp |= val << shift;
|
||||
|
||||
ret = i2c_smbus_write_byte_data(client, reg, tmp);
|
||||
if (!ret)
|
||||
data->reg_cache[reg] = tmp;
|
||||
|
||||
mutex_unlock(&data->lock);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* internally used functions
|
||||
*/
|
||||
|
||||
/* range */
|
||||
static int isl29003_get_range(struct i2c_client *client)
|
||||
{
|
||||
return __isl29003_read_reg(client, ISL29003_REG_CONTROL,
|
||||
ISL29003_RANGE_MASK, ISL29003_RANGE_SHIFT);
|
||||
}
|
||||
|
||||
static int isl29003_set_range(struct i2c_client *client, int range)
|
||||
{
|
||||
return __isl29003_write_reg(client, ISL29003_REG_CONTROL,
|
||||
ISL29003_RANGE_MASK, ISL29003_RANGE_SHIFT, range);
|
||||
}
|
||||
|
||||
/* resolution */
|
||||
static int isl29003_get_resolution(struct i2c_client *client)
|
||||
{
|
||||
return __isl29003_read_reg(client, ISL29003_REG_COMMAND,
|
||||
ISL29003_RES_MASK, ISL29003_RES_SHIFT);
|
||||
}
|
||||
|
||||
static int isl29003_set_resolution(struct i2c_client *client, int res)
|
||||
{
|
||||
return __isl29003_write_reg(client, ISL29003_REG_COMMAND,
|
||||
ISL29003_RES_MASK, ISL29003_RES_SHIFT, res);
|
||||
}
|
||||
|
||||
/* mode */
|
||||
static int isl29003_get_mode(struct i2c_client *client)
|
||||
{
|
||||
return __isl29003_read_reg(client, ISL29003_REG_COMMAND,
|
||||
ISL29003_RES_MASK, ISL29003_RES_SHIFT);
|
||||
}
|
||||
|
||||
static int isl29003_set_mode(struct i2c_client *client, int mode)
|
||||
{
|
||||
return __isl29003_write_reg(client, ISL29003_REG_COMMAND,
|
||||
ISL29003_RES_MASK, ISL29003_RES_SHIFT, mode);
|
||||
}
|
||||
|
||||
/* power_state */
|
||||
static int isl29003_set_power_state(struct i2c_client *client, int state)
|
||||
{
|
||||
return __isl29003_write_reg(client, ISL29003_REG_COMMAND,
|
||||
ISL29003_ADC_ENABLED | ISL29003_ADC_PD, 0,
|
||||
state ? ISL29003_ADC_ENABLED : ISL29003_ADC_PD);
|
||||
}
|
||||
|
||||
static int isl29003_get_power_state(struct i2c_client *client)
|
||||
{
|
||||
struct isl29003_data *data = i2c_get_clientdata(client);
|
||||
u8 cmdreg = data->reg_cache[ISL29003_REG_COMMAND];
|
||||
return ~cmdreg & ISL29003_ADC_PD;
|
||||
}
|
||||
|
||||
static int isl29003_get_adc_value(struct i2c_client *client)
|
||||
{
|
||||
struct isl29003_data *data = i2c_get_clientdata(client);
|
||||
int lsb, msb, range, bitdepth;
|
||||
|
||||
mutex_lock(&data->lock);
|
||||
lsb = i2c_smbus_read_byte_data(client, ISL29003_REG_LSB_SENSOR);
|
||||
|
||||
if (lsb < 0) {
|
||||
mutex_unlock(&data->lock);
|
||||
return lsb;
|
||||
}
|
||||
|
||||
msb = i2c_smbus_read_byte_data(client, ISL29003_REG_MSB_SENSOR);
|
||||
mutex_unlock(&data->lock);
|
||||
|
||||
if (msb < 0)
|
||||
return msb;
|
||||
|
||||
range = isl29003_get_range(client);
|
||||
bitdepth = (4 - isl29003_get_resolution(client)) * 4;
|
||||
return (((msb << 8) | lsb) * gain_range[range]) >> bitdepth;
|
||||
}
|
||||
|
||||
/*
|
||||
* sysfs layer
|
||||
*/
|
||||
|
||||
/* range */
|
||||
static ssize_t isl29003_show_range(struct device *dev,
|
||||
struct device_attribute *attr, char *buf)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
return sprintf(buf, "%i\n", isl29003_get_range(client));
|
||||
}
|
||||
|
||||
static ssize_t isl29003_store_range(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
unsigned long val;
|
||||
int ret;
|
||||
|
||||
if ((strict_strtoul(buf, 10, &val) < 0) || (val > 3))
|
||||
return -EINVAL;
|
||||
|
||||
ret = isl29003_set_range(client, val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static DEVICE_ATTR(range, S_IWUSR | S_IRUGO,
|
||||
isl29003_show_range, isl29003_store_range);
|
||||
|
||||
|
||||
/* resolution */
|
||||
static ssize_t isl29003_show_resolution(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
char *buf)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
return sprintf(buf, "%d\n", isl29003_get_resolution(client));
|
||||
}
|
||||
|
||||
static ssize_t isl29003_store_resolution(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
unsigned long val;
|
||||
int ret;
|
||||
|
||||
if ((strict_strtoul(buf, 10, &val) < 0) || (val > 3))
|
||||
return -EINVAL;
|
||||
|
||||
ret = isl29003_set_resolution(client, val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static DEVICE_ATTR(resolution, S_IWUSR | S_IRUGO,
|
||||
isl29003_show_resolution, isl29003_store_resolution);
|
||||
|
||||
/* mode */
|
||||
static ssize_t isl29003_show_mode(struct device *dev,
|
||||
struct device_attribute *attr, char *buf)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
return sprintf(buf, "%d\n", isl29003_get_mode(client));
|
||||
}
|
||||
|
||||
static ssize_t isl29003_store_mode(struct device *dev,
|
||||
struct device_attribute *attr, const char *buf, size_t count)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
unsigned long val;
|
||||
int ret;
|
||||
|
||||
if ((strict_strtoul(buf, 10, &val) < 0) || (val > 2))
|
||||
return -EINVAL;
|
||||
|
||||
ret = isl29003_set_mode(client, val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static DEVICE_ATTR(mode, S_IWUSR | S_IRUGO,
|
||||
isl29003_show_mode, isl29003_store_mode);
|
||||
|
||||
|
||||
/* power state */
|
||||
static ssize_t isl29003_show_power_state(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
char *buf)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
return sprintf(buf, "%d\n", isl29003_get_power_state(client));
|
||||
}
|
||||
|
||||
static ssize_t isl29003_store_power_state(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
unsigned long val;
|
||||
int ret;
|
||||
|
||||
if ((strict_strtoul(buf, 10, &val) < 0) || (val > 1))
|
||||
return -EINVAL;
|
||||
|
||||
ret = isl29003_set_power_state(client, val);
|
||||
return ret ? ret : count;
|
||||
}
|
||||
|
||||
static DEVICE_ATTR(power_state, S_IWUSR | S_IRUGO,
|
||||
isl29003_show_power_state, isl29003_store_power_state);
|
||||
|
||||
|
||||
/* lux */
|
||||
static ssize_t isl29003_show_lux(struct device *dev,
|
||||
struct device_attribute *attr, char *buf)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
|
||||
/* No LUX data if not operational */
|
||||
if (!isl29003_get_power_state(client))
|
||||
return -EBUSY;
|
||||
|
||||
return sprintf(buf, "%d\n", isl29003_get_adc_value(client));
|
||||
}
|
||||
|
||||
static DEVICE_ATTR(lux, S_IRUGO, isl29003_show_lux, NULL);
|
||||
|
||||
static struct attribute *isl29003_attributes[] = {
|
||||
&dev_attr_range.attr,
|
||||
&dev_attr_resolution.attr,
|
||||
&dev_attr_mode.attr,
|
||||
&dev_attr_power_state.attr,
|
||||
&dev_attr_lux.attr,
|
||||
NULL
|
||||
};
|
||||
|
||||
static const struct attribute_group isl29003_attr_group = {
|
||||
.attrs = isl29003_attributes,
|
||||
};
|
||||
|
||||
static int isl29003_init_client(struct i2c_client *client)
|
||||
{
|
||||
struct isl29003_data *data = i2c_get_clientdata(client);
|
||||
int i;
|
||||
|
||||
/* read all the registers once to fill the cache.
|
||||
* if one of the reads fails, we consider the init failed */
|
||||
for (i = 0; i < ARRAY_SIZE(data->reg_cache); i++) {
|
||||
int v = i2c_smbus_read_byte_data(client, i);
|
||||
if (v < 0)
|
||||
return -ENODEV;
|
||||
|
||||
data->reg_cache[i] = v;
|
||||
}
|
||||
|
||||
/* set defaults */
|
||||
isl29003_set_range(client, 0);
|
||||
isl29003_set_resolution(client, 0);
|
||||
isl29003_set_mode(client, 0);
|
||||
isl29003_set_power_state(client, 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* I2C layer
|
||||
*/
|
||||
|
||||
static int __devinit isl29003_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
|
||||
struct isl29003_data *data;
|
||||
int err = 0;
|
||||
|
||||
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
|
||||
return -EIO;
|
||||
|
||||
data = kzalloc(sizeof(struct isl29003_data), GFP_KERNEL);
|
||||
if (!data)
|
||||
return -ENOMEM;
|
||||
|
||||
data->client = client;
|
||||
i2c_set_clientdata(client, data);
|
||||
mutex_init(&data->lock);
|
||||
|
||||
/* initialize the ISL29003 chip */
|
||||
err = isl29003_init_client(client);
|
||||
if (err)
|
||||
goto exit_kfree;
|
||||
|
||||
/* register sysfs hooks */
|
||||
err = sysfs_create_group(&client->dev.kobj, &isl29003_attr_group);
|
||||
if (err)
|
||||
goto exit_kfree;
|
||||
|
||||
dev_info(&client->dev, "driver version %s enabled\n", DRIVER_VERSION);
|
||||
return 0;
|
||||
|
||||
exit_kfree:
|
||||
kfree(data);
|
||||
return err;
|
||||
}
|
||||
|
||||
static int __devexit isl29003_remove(struct i2c_client *client)
|
||||
{
|
||||
sysfs_remove_group(&client->dev.kobj, &isl29003_attr_group);
|
||||
isl29003_set_power_state(client, 0);
|
||||
kfree(i2c_get_clientdata(client));
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
static int isl29003_suspend(struct i2c_client *client, pm_message_t mesg)
|
||||
{
|
||||
return isl29003_set_power_state(client, 0);
|
||||
}
|
||||
|
||||
static int isl29003_resume(struct i2c_client *client)
|
||||
{
|
||||
int i;
|
||||
struct isl29003_data *data = i2c_get_clientdata(client);
|
||||
|
||||
/* restore registers from cache */
|
||||
for (i = 0; i < ARRAY_SIZE(data->reg_cache); i++)
|
||||
if (!i2c_smbus_write_byte_data(client, i, data->reg_cache[i]))
|
||||
return -EIO;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#else
|
||||
#define isl29003_suspend NULL
|
||||
#define isl29003_resume NULL
|
||||
#endif /* CONFIG_PM */
|
||||
|
||||
static const struct i2c_device_id isl29003_id[] = {
|
||||
{ "isl29003", 0 },
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, isl29003_id);
|
||||
|
||||
static struct i2c_driver isl29003_driver = {
|
||||
.driver = {
|
||||
.name = ISL29003_DRV_NAME,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.suspend = isl29003_suspend,
|
||||
.resume = isl29003_resume,
|
||||
.probe = isl29003_probe,
|
||||
.remove = __devexit_p(isl29003_remove),
|
||||
.id_table = isl29003_id,
|
||||
};
|
||||
|
||||
static int __init isl29003_init(void)
|
||||
{
|
||||
return i2c_add_driver(&isl29003_driver);
|
||||
}
|
||||
|
||||
static void __exit isl29003_exit(void)
|
||||
{
|
||||
i2c_del_driver(&isl29003_driver);
|
||||
}
|
||||
|
||||
MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
|
||||
MODULE_DESCRIPTION("ISL29003 ambient light sensor driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_VERSION(DRIVER_VERSION);
|
||||
|
||||
module_init(isl29003_init);
|
||||
module_exit(isl29003_exit);
|
||||
|
||||
Reference in New Issue