dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

doc: fix broken references 

There are numerous broken references to Documentation files (in other
Documentation files, in comments, etc.). These broken references are
caused by typo's in the references, and by renames or removals of the
Documentation files. Some broken references are simply odd.

Fix these broken references, sometimes by dropping the irrelevant text
they were part of.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit is contained in:
Paul Bolle 2011-08-15 02:02:26 +02:00 committed by Jiri Kosina
parent e060c38434
commit 395cf9691d
96 changed files with 125 additions and 179 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/PCI/pci.txt
View File

@ -314,7 +314,7 @@ from the PCI device config space. Use the values in the pci_dev structure
as the PCI "bus address" might have been remapped to a "host physical"
address by the arch/chip-set specific kernel support.
See Documentation/IO-mapping.txt for how to access device registers
See Documentation/io-mapping.txt for how to access device registers
or device memory.
The device driver needs to call pci_request_region() to verify

2
Documentation/blackfin/bfin-gpio-notes.txt
View File

@ -1,5 +1,5 @@
/*
* File: Documentation/blackfin/bfin-gpio-note.txt
* File: Documentation/blackfin/bfin-gpio-notes.txt
* Based on:
* Author:
*

2
Documentation/block/biodoc.txt
View File

@ -186,7 +186,7 @@ a virtual address mapping (unlike the earlier scheme of virtual address
do not have a corresponding kernel virtual address space mapping) and
low-memory pages.
Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion
Note: Please refer to Documentation/DMA-API-HOWTO.txt for a discussion
on PCI high mem DMA aspects and mapping of scatter gather lists, and support
for 64 bit PCI.

2
Documentation/bus-virt-phys-mapping.txt
View File

@ -1,6 +1,6 @@
[ NOTE: The virt_to_bus() and bus_to_virt() functions have been
superseded by the functionality provided by the PCI DMA interface
(see Documentation/PCI/PCI-DMA-mapping.txt). They continue
(see Documentation/DMA-API-HOWTO.txt). They continue
to be documented below for historical purposes, but new code
must not use them. --davidm 00/12/12 ]

2
Documentation/cdrom/packet-writing.txt
View File

@ -109,7 +109,7 @@ this interface. (see http://tom.ist-im-web.de/download/pktcdvd )
For a description of the sysfs interface look into the file:
Documentation/ABI/testing/sysfs-block-pktcdvd
Documentation/ABI/testing/sysfs-class-pktcdvd
Using the pktcdvd debugfs interface

2
Documentation/development-process/4.Coding
View File

@ -278,7 +278,7 @@ enabled, a configurable percentage of memory allocations will be made to
fail; these failures can be restricted to a specific range of code.
Running with fault injection enabled allows the programmer to see how the
code responds when things go badly. See
Documentation/fault-injection/fault-injection.text for more information on
Documentation/fault-injection/fault-injection.txt for more information on
how to use this facility.
Other kinds of errors can be found with the "sparse" static analysis tool.

2
Documentation/devicetree/bindings/gpio/led.txt
View File

@ -8,7 +8,7 @@ node's name represents the name of the corresponding LED.
LED sub-node properties:
- gpios : Should specify the LED's GPIO, see "Specifying GPIO information
for devices" in Documentation/powerpc/booting-without-of.txt. Active
for devices" in Documentation/devicetree/booting-without-of.txt. Active
low LEDs should be indicated using flags in the GPIO specifier.
- label : (optional) The label for this LED. If omitted, the label is
taken from the node name (excluding the unit address).

6
Documentation/filesystems/caching/object.txt
View File

@ -127,9 +127,9 @@ fscache_enqueue_object()).
PROVISION OF CPU TIME
---------------------
The work to be done by the various states is given CPU time by the threads of
the slow work facility (see Documentation/slow-work.txt). This is used in
preference to the workqueue facility because:
The work to be done by the various states was given CPU time by the threads of
the slow work facility. This was used in preference to the workqueue facility
because:
(1) Threads may be completely occupied for very long periods of time by a
particular work item. These state actions may be doing sequences of

11
Documentation/filesystems/locks.txt
View File

@ -53,11 +53,12 @@ fcntl(), with all the problems that implies.
1.3 Mandatory Locking As A Mount Option
---------------------------------------
Mandatory locking, as described in 'Documentation/filesystems/mandatory.txt'
was prior to this release a general configuration option that was valid for
all mounted filesystems. This had a number of inherent dangers, not the
least of which was the ability to freeze an NFS server by asking it to read
a file for which a mandatory lock existed.
Mandatory locking, as described in
'Documentation/filesystems/mandatory-locking.txt' was prior to this release a
general configuration option that was valid for all mounted filesystems. This
had a number of inherent dangers, not the least of which was the ability to
freeze an NFS server by asking it to read a file for which a mandatory lock
existed.
From this release of the kernel, mandatory locking can be turned on and off
on a per-filesystem basis, using the mount options 'mand' and 'nomand'.

2
Documentation/filesystems/nfs/idmapper.txt
View File

@ -47,7 +47,7 @@ request-key will find the first matching line and corresponding program. In
this case, /some/other/program will handle all uid lookups and
/usr/sbin/nfs.idmap will handle gid, user, and group lookups.
See <file:Documentation/security/keys-request-keys.txt> for more information
See <file:Documentation/security/keys-request-key.txt> for more information
about the request-key function.

5
Documentation/filesystems/pohmelfs/design_notes.txt
View File

@ -58,8 +58,9 @@ data transfers.
POHMELFS clients operate with a working set of servers and are capable of balancing read-only
operations (like lookups or directory listings) between them according to IO priorities.
Administrators can add or remove servers from the set at run-time via special commands (described
in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers, which are connected
with write permission turned on. IO priority and permissions can be changed in run-time.
in Documentation/filesystems/pohmelfs/info.txt file). Writes are replicated to all servers, which
are connected with write permission turned on. IO priority and permissions can be changed in
run-time.
POHMELFS is capable of full data channel encryption and/or strong crypto hashing.
One can select any kernel supported cipher, encryption mode, hash type and operation mode

2
Documentation/filesystems/proc.txt
View File

@ -1263,7 +1263,7 @@ review the kernel documentation in the directory /usr/src/linux/Documentation.
This chapter is heavily based on the documentation included in the pre 2.2
kernels, and became part of it in version 2.2.1 of the Linux kernel.
Please see: Documentation/sysctls/ directory for descriptions of these
Please see: Documentation/sysctl/ directory for descriptions of these
entries.
------------------------------------------------------------------------------

3
Documentation/filesystems/vfs.txt
View File

@ -1053,9 +1053,6 @@ manipulate dentries:
and the dentry is returned. The caller must use dput()
to free the dentry when it finishes using it.
For further information on dentry locking, please refer to the document
Documentation/filesystems/dentry-locking.txt.
Mount Options
=============

6
Documentation/frv/booting.txt
View File

@ -180,9 +180,3 @@ separated by spaces:
This tells the kernel what program to run initially. By default this is
/sbin/init, but /sbin/sash or /bin/sh are common alternatives.
(*) vdc=...
This option configures the MB93493 companion chip visual display
driver. Please see Documentation/frv/mb93493/vdc.txt for more
information.

2
Documentation/input/input.txt
View File

@ -111,7 +111,7 @@ LCDs and many other purposes.
The monitor and speaker controls should be easy to add to the hid/input
interface, but for the UPSs and LCDs it doesn't make much sense. For this,
the hiddev interface was designed. See Documentation/usb/hiddev.txt
the hiddev interface was designed. See Documentation/hid/hiddev.txt
for more information about it.
The usage of the usbhid module is very simple, it takes no parameters,

4
Documentation/kernel-docs.txt
View File

@ -300,7 +300,7 @@
* Title: "The Kernel Hacking HOWTO"
Author: Various Talented People, and Rusty.
Location: in kernel tree, Documentation/DocBook/kernel-hacking/
Location: in kernel tree, Documentation/DocBook/kernel-hacking.tmpl
(must be built as "make {htmldocs | psdocs | pdfdocs})
Keywords: HOWTO, kernel contexts, deadlock, locking, modules,
symbols, return conventions.
@ -351,7 +351,7 @@
* Title: "Linux Kernel Locking HOWTO"
Author: Various Talented People, and Rusty.
Location: in kernel tree, Documentation/DocBook/kernel-locking/
Location: in kernel tree, Documentation/DocBook/kernel-locking.tmpl
(must be built as "make {htmldocs | psdocs | pdfdocs})
Keywords: locks, locking, spinlock, semaphore, atomic, race
condition, bottom halves, tasklets, softirqs.

12
Documentation/kernel-parameters.txt
View File

@ -163,7 +163,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
rsdt -- prefer RSDT over (default) XSDT
copy_dsdt -- copy DSDT to memory
See also Documentation/power/pm.txt, pci=noacpi
See also Documentation/power/runtime_pm.txt, pci=noacpi
acpi_rsdp= [ACPI,EFI,KEXEC]
Pass the RSDP address to the kernel, mostly used
@ -319,7 +319,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
amijoy.map= [HW,JOY] Amiga joystick support
Map of devices attached to JOY0DAT and JOY1DAT
Format: <a>,<b>
See also Documentation/kernel/input/joystick.txt
See also Documentation/input/joystick.txt
analog.map= [HW,JOY] Analog joystick and gamepad support
Specifies type or capabilities of an analog joystick
@ -408,7 +408,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
bttv.radio= Most important insmod options are available as
kernel args too.
bttv.pll= See Documentation/video4linux/bttv/Insmod-options
bttv.tuner= and Documentation/video4linux/bttv/CARDLIST
bttv.tuner=
bulk_remove=off [PPC] This parameter disables the use of the pSeries
firmware feature for flushing multiple hpte entries
@ -724,7 +724,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
elevator= [IOSCHED]
Format: {"cfq" | "deadline" | "noop"}
See Documentation/block/as-iosched.txt and
See Documentation/block/cfq-iosched.txt and
Documentation/block/deadline-iosched.txt for details.
elfcorehdr= [IA-64,PPC,SH,X86]
@ -765,7 +765,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
fail_make_request=[KNL]
General fault injection mechanism.
Format: <interval>,<probability>,<space>,<times>
See also /Documentation/fault-injection/.
See also Documentation/fault-injection/.
floppy= [HW]
See Documentation/blockdev/floppy.txt.
@ -2375,7 +2375,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Format: <integer>
sonypi.*= [HW] Sony Programmable I/O Control Device driver
See Documentation/sonypi.txt
See Documentation/laptops/sonypi.txt
specialix= [HW,SERIAL] Specialix multi-serial port adapter
See Documentation/serial/specialix.txt.

4
Documentation/laptops/thinkpad-acpi.txt
View File

@ -736,7 +736,7 @@ status as "unknown". The available commands are:
sysfs notes:
The ThinkLight sysfs interface is documented by the LED class
documentation, in Documentation/leds-class.txt. The ThinkLight LED name
documentation, in Documentation/leds/leds-class.txt. The ThinkLight LED name
is "tpacpi::thinklight".
Due to limitations in the sysfs LED class, if the status of the ThinkLight
@ -833,7 +833,7 @@ All of the above can be turned on and off and can be made to blink.
sysfs notes:
The ThinkPad LED sysfs interface is described in detail by the LED class
documentation, in Documentation/leds-class.txt.
documentation, in Documentation/leds/leds-class.txt.
The LEDs are named (in LED ID order, from 0 to 12):
"tpacpi::power", "tpacpi:orange:batt", "tpacpi:green:batt",

4
Documentation/media-framework.txt
View File

@ -9,8 +9,8 @@ Introduction
------------
The media controller API is documented in DocBook format in
Documentation/DocBook/v4l/media-controller.xml. This document will focus on
the kernel-side implementation of the media framework.
Documentation/DocBook/media/v4l/media-controller.xml. This document will focus
on the kernel-side implementation of the media framework.
Abstract media device model

2
Documentation/memory-barriers.txt
View File

@ -438,7 +438,7 @@ There are certain things that the Linux kernel memory barriers do not guarantee:
[*] For information on bus mastering DMA and coherency please read:
Documentation/PCI/pci.txt
Documentation/PCI/PCI-DMA-mapping.txt
Documentation/DMA-API-HOWTO.txt
Documentation/DMA-API.txt

2
Documentation/networking/scaling.txt
View File

@ -73,7 +73,7 @@ of queues to IRQs can be determined from /proc/interrupts. By default,
an IRQ may be handled on any CPU. Because a non-negligible part of packet
processing takes place in receive interrupt handling, it is advantageous
to spread receive interrupts between CPUs. To manually adjust the IRQ
affinity of each interrupt see Documentation/IRQ-affinity. Some systems
affinity of each interrupt see Documentation/IRQ-affinity.txt. Some systems
will be running irqbalance, a daemon that dynamically optimizes IRQ
assignments and as a result may override any manual settings.

2
Documentation/power/basic-pm-debugging.txt
View File

@ -173,7 +173,7 @@ kernel messages using the serial console. This may provide you with some
information about the reasons of the suspend (resume) failure. Alternatively,
it may be possible to use a FireWire port for debugging with firescope
(ftp://ftp.firstfloor.org/pub/ak/firescope/). On x86 it is also possible to
use the PM_TRACE mechanism documented in Documentation/s2ram.txt .
use the PM_TRACE mechanism documented in Documentation/power/s2ram.txt .
2. Testing suspend to RAM (STR)

3
Documentation/power/userland-swsusp.txt
View File

@ -77,7 +77,8 @@ SNAPSHOT_SET_SWAP_AREA - set the resume partition and the offset (in <PAGE_SIZE>
resume_swap_area, as defined in kernel/power/suspend_ioctls.h,
containing the resume device specification and the offset); for swap
partitions the offset is always 0, but it is different from zero for
swap files (see Documentation/swsusp-and-swap-files.txt for details).
swap files (see Documentation/power/swsusp-and-swap-files.txt for
details).
SNAPSHOT_PLATFORM_SUPPORT - enable/disable the hibernation platform support,
depending on the argument value (enable, if the argument is nonzero)

3
Documentation/rfkill.txt
View File

@ -117,5 +117,4 @@ The contents of these variables corresponds to the "name", "state" and
"type" sysfs files explained above.
For further details consult Documentation/ABI/stable/dev-rfkill and
Documentation/ABI/stable/sysfs-class-rfkill.
For further details consult Documentation/ABI/stable/sysfs-class-rfkill.

2
Documentation/scsi/aic7xxx_old.txt
View File

@ -444,7 +444,7 @@ linux-1.1.x and fairly stable since linux-1.2.x, and are also in FreeBSD
Kernel Compile options
------------------------------
The various kernel compile time options for this driver are now fairly
well documented in the file Documentation/Configure.help. In order to
well documented in the file drivers/scsi/Kconfig. In order to
see this documentation, you need to use one of the advanced configuration
programs (menuconfig and xconfig). If you are using the "make menuconfig"
method of configuring your kernel, then you would simply highlight the

5
Documentation/scsi/scsi_mid_low_api.txt
View File

@ -55,11 +55,6 @@ or in the same directory as the C source code. For example to find a url
about the USB mass storage driver see the
/usr/src/linux/drivers/usb/storage directory.
The Linux kernel source Documentation/DocBook/scsidrivers.tmpl file
refers to this file. With the appropriate DocBook tool-set, this permits
users to generate html, ps and pdf renderings of information within this
file (e.g. the interface functions).
Driver structure
================
Traditionally an LLD for the SCSI subsystem has been at least two files in

3
Documentation/security/keys-trusted-encrypted.txt
View File

@ -156,4 +156,5 @@ Load an encrypted key "evm" from saved blob:
Other uses for trusted and encrypted keys, such as for disk and file encryption
are anticipated. In particular the new format 'ecryptfs' has been defined in
in order to use encrypted keys to mount an eCryptfs filesystem. More details
about the usage can be found in the file 'Documentation/keys-ecryptfs.txt'.
about the usage can be found in the file
'Documentation/security/keys-ecryptfs.txt'.

3
Documentation/sound/oss/PAS16
View File

@ -60,8 +60,7 @@ With PAS16 you can use two audio device files at the same time. /dev/dsp (and
The new stuff for 2.3.99 and later
============================================================================
The following configuration options from Documentation/Configure.help
are relevant to configuring the PAS16:
The following configuration options are relevant to configuring the PAS16:
Sound card support
CONFIG_SOUND

4
Documentation/spi/pxa2xx
View File

@ -2,7 +2,7 @@ PXA2xx SPI on SSP driver HOWTO
===================================================
This a mini howto on the pxa2xx_spi driver. The driver turns a PXA2xx
synchronous serial port into a SPI master controller
(see Documentation/spi/spi_summary). The driver has the following features
(see Documentation/spi/spi-summary). The driver has the following features
- Support for any PXA2xx SSP
- SSP PIO and SSP DMA data transfers.
@ -85,7 +85,7 @@ Declaring Slave Devices
-----------------------
Typically each SPI slave (chip) is defined in the arch/.../mach-*/board-*.c
using the "spi_board_info" structure found in "linux/spi/spi.h". See
"Documentation/spi/spi_summary" for additional information.
"Documentation/spi/spi-summary" for additional information.
Each slave device attached to the PXA must provide slave specific configuration
information via the structure "pxa2xx_spi_chip" found in

2
Documentation/timers/highres.txt
View File

@ -30,7 +30,7 @@ hrtimer base infrastructure
---------------------------
The hrtimer base infrastructure was merged into the 2.6.16 kernel. Details of
the base implementation are covered in Documentation/hrtimers/hrtimer.txt. See
the base implementation are covered in Documentation/timers/hrtimers.txt. See
also figure #2 (OLS slides p. 15)
The main differences to the timer wheel, which holds the armed timer_list type

6
Documentation/usb/dma.txt
View File

@ -7,7 +7,7 @@ API OVERVIEW
The big picture is that USB drivers can continue to ignore most DMA issues,
though they still must provide DMA-ready buffers (see
Documentation/PCI/PCI-DMA-mapping.txt). That's how they've worked through
Documentation/DMA-API-HOWTO.txt). That's how they've worked through
the 2.4 (and earlier) kernels.
OR: they can now be DMA-aware.
@ -57,7 +57,7 @@ and effects like cache-trashing can impose subtle penalties.
force a consistent memory access ordering by using memory barriers. It's
not using a streaming DMA mapping, so it's good for small transfers on
systems where the I/O would otherwise thrash an IOMMU mapping. (See
Documentation/PCI/PCI-DMA-mapping.txt for definitions of "coherent" and
Documentation/DMA-API-HOWTO.txt for definitions of "coherent" and
"streaming" DMA mappings.)
Asking for 1/Nth of a page (as well as asking for N pages) is reasonably
@ -88,7 +88,7 @@ WORKING WITH EXISTING BUFFERS
Existing buffers aren't usable for DMA without first being mapped into the
DMA address space of the device. However, most buffers passed to your
driver can safely be used with such DMA mapping. (See the first section
of Documentation/PCI/PCI-DMA-mapping.txt, titled "What memory is DMA-able?")
of Documentation/DMA-API-HOWTO.txt, titled "What memory is DMA-able?")
- When you're using scatterlists, you can map everything at once. On some
systems, this kicks in an IOMMU and turns the scatterlists into single

2
Documentation/virtual/lguest/lguest.c
View File

@ -436,7 +436,7 @@ static unsigned long load_bzimage(int fd)
/*
* Go back to the start of the file and read the header. It should be
* a Linux boot header (see Documentation/x86/i386/boot.txt)
* a Linux boot header (see Documentation/x86/boot.txt)
*/
lseek(fd, 0, SEEK_SET);
read(fd, &boot, sizeof(boot));

4
Documentation/vm/numa
View File

@ -109,11 +109,11 @@ to improve NUMA locality using various CPU affinity command line interfaces,
such as taskset(1) and numactl(1), and program interfaces such as
sched_setaffinity(2). Further, one can modify the kernel's default local
allocation behavior using Linux NUMA memory policy.
[see Documentation/vm/numa_memory_policy.]
[see Documentation/vm/numa_memory_policy.txt.]
System administrators can restrict the CPUs and nodes' memories that a non-
privileged user can specify in the scheduling or NUMA commands and functions
using control groups and CPUsets. [see Documentation/cgroups/CPUsets.txt]
using control groups and CPUsets. [see Documentation/cgroups/cpusets.txt]
On architectures that do not hide memoryless nodes, Linux will include only
zones [nodes] with memory in the zonelists. This means that for a memoryless

2
Documentation/vm/slub.txt
View File

@ -17,7 +17,7 @@ data and perform operation on the slabs. By default slabinfo only lists
slabs that have data in them. See "slabinfo -h" for more options when
running the command. slabinfo can be compiled with
gcc -o slabinfo Documentation/vm/slabinfo.c
gcc -o slabinfo tools/slub/slabinfo.c
Some of the modes of operation of slabinfo require that slub debugging
be enabled on the command line. F.e. no tracking information will be

5
arch/alpha/kernel/srm_env.c
View File

@ -4,9 +4,8 @@
*
* (C) 2001,2002,2006 by Jan-Benedict Glaw <jbglaw@lug-owl.de>
*
* This driver is at all a modified version of Erik Mouw's
* Documentation/DocBook/procfs_example.c, so: thank
* you, Erik! He can be reached via email at
* This driver is a modified version of Erik Mouw's example proc
* interface, so: thank you, Erik! He can be reached via email at
* <J.A.K.Mouw@its.tudelft.nl>. It is based on an idea
* provided by DEC^WCompaq^WIntel's "Jumpstart" CD. They
* included a patch like this as well. Thanks for idea!

2
arch/arm/Kconfig
View File

@ -1374,7 +1374,7 @@ config SMP
processor machines. On a single processor machine, the kernel will
run faster if you say N here.
See also <file:Documentation/i386/IO-APIC.txt>,
See also <file:Documentation/x86/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://tldp.org/HOWTO/SMP-HOWTO.html>.

2
arch/arm/include/asm/io.h
View File

@ -238,7 +238,7 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
* ioremap and friends.
*
* ioremap takes a PCI memory address, as specified in
* Documentation/IO-mapping.txt.
* Documentation/io-mapping.txt.
*
*/
#ifndef __arch_ioremap

3
arch/arm/mach-pxa/xcep.c
View File

@ -142,8 +142,7 @@ static struct platform_device *devices[] __initdata = {
/* We have to state that there are HWMON devices on the I2C bus on XCEP.
* Drivers for HWMON verify capabilities of the adapter when loading and
* refuse to attach if the adapter doesn't support HWMON class of devices.
* See also Documentation/i2c/porting-clients. */
* refuse to attach if the adapter doesn't support HWMON class of devices. */
static struct i2c_pxa_platform_data xcep_i2c_platform_data = {
.class = I2C_CLASS_HWMON
};

12
arch/ia64/hp/common/sba_iommu.c
View File

@ -915,7 +915,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
* @dir: R/W or both.
* @attrs: optional dma attributes
*
* See Documentation/PCI/PCI-DMA-mapping.txt
* See Documentation/DMA-API-HOWTO.txt
*/
static dma_addr_t sba_map_page(struct device *dev, struct page *page,
unsigned long poff, size_t size,
@ -1044,7 +1044,7 @@ sba_mark_clean(struct ioc *ioc, dma_addr_t iova, size_t size)
* @dir: R/W or both.
* @attrs: optional dma attributes
*
* See Documentation/PCI/PCI-DMA-mapping.txt
* See Documentation/DMA-API-HOWTO.txt
*/
static void sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size,
enum dma_data_direction dir, struct dma_attrs *attrs)
@ -1127,7 +1127,7 @@ void sba_unmap_single_attrs(struct device *dev, dma_addr_t iova, size_t size,
* @size: number of bytes mapped in driver buffer.
* @dma_handle: IOVA of new buffer.
*
* See Documentation/PCI/PCI-DMA-mapping.txt
* See Documentation/DMA-API-HOWTO.txt
*/
static void *
sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags)
@ -1190,7 +1190,7 @@ sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp
* @vaddr: virtual address IOVA of "consistent" buffer.
* @dma_handler: IO virtual address of "consistent" buffer.
*
* See Documentation/PCI/PCI-DMA-mapping.txt
* See Documentation/DMA-API-HOWTO.txt
*/
static void sba_free_coherent (struct device *dev, size_t size, void *vaddr,
dma_addr_t dma_handle)
@ -1453,7 +1453,7 @@ static void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist,
* @dir: R/W or both.
* @attrs: optional dma attributes
*
* See Documentation/PCI/PCI-DMA-mapping.txt
* See Documentation/DMA-API-HOWTO.txt
*/
static int sba_map_sg_attrs(struct device *dev, struct scatterlist *sglist,
int nents, enum dma_data_direction dir,
@ -1549,7 +1549,7 @@ static int sba_map_sg_attrs(struct device *dev, struct scatterlist *sglist,
* @dir: R/W or both.
* @attrs: optional dma attributes
*
* See Documentation/PCI/PCI-DMA-mapping.txt
* See Documentation/DMA-API-HOWTO.txt
*/
static void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist,
int nents, enum dma_data_direction dir,

2
arch/m68k/q40/README
View File

@ -31,7 +31,7 @@ drivers used by the Q40, apart from the very obvious (console etc.):
char/joystick/* # most of this should work, not
# in default config.in
block/q40ide.c # startup for ide
ide* # see Documentation/ide.txt
ide* # see Documentation/ide/ide.txt
floppy.c # normal PC driver, DMA emu in asm/floppy.h
# and arch/m68k/kernel/entry.S
# see drivers/block/README.fd

2
arch/microblaze/include/asm/dma-mapping.h
View File

@ -16,7 +16,7 @@
#define _ASM_MICROBLAZE_DMA_MAPPING_H
/*
* See Documentation/PCI/PCI-DMA-mapping.txt and
* See Documentation/DMA-API-HOWTO.txt and
* Documentation/DMA-API.txt for documentation.
*/

6
arch/mips/include/asm/lasat/lasat.h
View File

@ -41,10 +41,8 @@ enum lasat_mtdparts {
/*
* The format of the data record in the EEPROM.
* See Documentation/LASAT/eeprom.txt for a detailed description
* of the fields in this struct, and the LASAT Hardware Configuration
* field specification for a detailed description of the config
* field.
* See the LASAT Hardware Configuration field specification for a detailed
* description of the config field.
*/
#include <linux/types.h>

2
arch/mn10300/Kconfig
View File

@ -195,7 +195,7 @@ config SMP
singleprocessor machines. On a singleprocessor machine, the kernel
will run faster if you say N here.
See also <file:Documentation/i386/IO-APIC.txt>,
See also <file:Documentation/x86/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://www.tldp.org/docs.html#howto>.

1
arch/mn10300/kernel/irq.c
View File

@ -260,7 +260,6 @@ void set_intr_level(int irq, u16 level)
/*
* mark an interrupt to be ACK'd after interrupt handlers have been run rather
* than before
* - see Documentation/mn10300/features.txt
*/
void mn10300_set_lateack_irq_type(int irq)
{

2
arch/openrisc/Kconfig
View File

@ -1,6 +1,6 @@
#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/config-language.txt.
# see Documentation/kbuild/kconfig-language.txt.
#
config OPENRISC

2
arch/openrisc/include/asm/dma-mapping.h
View File

@ -18,7 +18,7 @@
#define __ASM_OPENRISC_DMA_MAPPING_H
/*
* See Documentation/PCI/PCI-DMA-mapping.txt and
* See Documentation/DMA-API-HOWTO.txt and
* Documentation/DMA-API.txt for documentation.
*
* This file is written with the intention of eventually moving over

2
arch/parisc/include/asm/dma-mapping.h
View File

@ -5,7 +5,7 @@
#include <asm/cacheflush.h>
#include <asm/scatterlist.h>
/* See Documentation/PCI/PCI-DMA-mapping.txt */
/* See Documentation/DMA-API-HOWTO.txt */
struct hppa_dma_ops {
int (*dma_supported)(struct device *dev, u64 mask);
void *(*alloc_consistent)(struct device *dev, size_t size, dma_addr_t *iova, gfp_t flag);

2
arch/parisc/kernel/pci-dma.c
View File

@ -2,7 +2,7 @@
** PARISC 1.1 Dynamic DMA mapping support.
** This implementation is for PA-RISC platforms that do not support
** I/O TLBs (aka DMA address translation hardware).
** See Documentation/PCI/PCI-DMA-mapping.txt for interface definitions.
** See Documentation/DMA-API-HOWTO.txt for interface definitions.
**
** (c) Copyright 1999,2000 Hewlett-Packard Company
** (c) Copyright 2000 Grant Grundler

2
arch/powerpc/include/asm/qe.h
View File

@ -196,7 +196,7 @@ static inline int qe_alive_during_sleep(void)
/* Structure that defines QE firmware binary files.
*
* See Documentation/powerpc/qe-firmware.txt for a description of these
* See Documentation/powerpc/qe_firmware.txt for a description of these
* fields.
*/
struct qe_firmware {

2
arch/powerpc/sysdev/qe_lib/qe.c
View File

@ -382,7 +382,7 @@ static void qe_upload_microcode(const void *base,
/*
* Upload a microcode to the I-RAM at a specific address.
*
* See Documentation/powerpc/qe-firmware.txt for information on QE microcode
* See Documentation/powerpc/qe_firmware.txt for information on QE microcode
* uploading.
*
* Currently, only version 1 is supported, so the 'version' field must be

2
arch/unicore32/include/asm/io.h
View File

@ -32,7 +32,7 @@ extern void __uc32_iounmap(volatile void __iomem *addr);
* ioremap and friends.
*
* ioremap takes a PCI memory address, as specified in
* Documentation/IO-mapping.txt.
* Documentation/io-mapping.txt.
*
*/
#define ioremap(cookie, size) __uc32_ioremap(cookie, size)

2
arch/x86/Kconfig
View File

@ -279,7 +279,7 @@ config SMP
Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
Management" code will be disabled if you say Y here.
See also <file:Documentation/i386/IO-APIC.txt>,
See also <file:Documentation/x86/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://www.tldp.org/docs.html#howto>.

2
arch/x86/Kconfig.debug
View File

@ -139,7 +139,7 @@ config IOMMU_DEBUG
code. When you use it make sure you have a big enough
IOMMU/AGP aperture. Most of the options enabled by this can
be set more finegrained using the iommu= command line
options. See Documentation/x86_64/boot-options.txt for more
options. See Documentation/x86/x86_64/boot-options.txt for more
details.
config IOMMU_STRESS

2
arch/x86/boot/header.S
View File

@ -129,7 +129,7 @@ start_sys_seg: .word SYSSEG # obsolete and meaningless, but just
type_of_loader: .byte 0 # 0 means ancient bootloader, newer
# bootloaders know to change this.
# See Documentation/i386/boot.txt for
# See Documentation/x86/boot.txt for
# assigned ids
# flags, unused bits must be zero (RFU) bit within loadflags

2
arch/x86/include/asm/dma-mapping.h
View File

@ -2,7 +2,7 @@
#define _ASM_X86_DMA_MAPPING_H
/*
* IOMMU interface. See Documentation/PCI/PCI-DMA-mapping.txt and
* IOMMU interface. See Documentation/DMA-API-HOWTO.txt and
* Documentation/DMA-API.txt for documentation.
*/

2
arch/x86/kernel/amd_gart_64.c
View File

@ -5,7 +5,7 @@
* This allows to use PCI devices that only support 32bit addresses on systems
* with more than 4GB.
*
* See Documentation/PCI/PCI-DMA-mapping.txt for the interface specification.
* See Documentation/DMA-API-HOWTO.txt for the interface specification.
*
* Copyright 2002 Andi Kleen, SuSE Labs.
* Subject to the GNU General Public License v2 only.

2
arch/x86/kernel/apm_32.c
View File

@ -249,8 +249,6 @@ extern int (*console_blank_hook)(int);
#define APM_MINOR_DEV 134
/*
* See Documentation/Config.help for the configuration options.
*
* Various options can be changed at boot time as follows:
* (We allow underscores for compatibility with the modules code)
* apm=on/off enable/disable APM

4
arch/x86/kernel/pci-dma.c
View File

@ -117,8 +117,8 @@ again:
}
/*
* See <Documentation/x86_64/boot-options.txt> for the iommu kernel parameter
* documentation.
* See <Documentation/x86/x86_64/boot-options.txt> for the iommu kernel
* parameter documentation.
*/
static __init int iommu_setup(char *p)
{

5
drivers/char/apm-emulation.c
View File

@ -40,10 +40,7 @@
#define APM_MINOR_DEV 134
/*
* See Documentation/Config.help for the configuration options.
*
* Various options can be changed at boot time as follows:
* (We allow underscores for compatibility with the modules code)
* One option can be changed at boot time as follows:
* apm=on/off enable/disable APM
*/

2
drivers/input/misc/rotary_encoder.c
View File

@ -7,7 +7,7 @@
* state machine code inspired by code from Tim Ruetz
*
* A generic driver for rotary encoders connected to GPIO lines.
* See file:Documentation/input/rotary_encoder.txt for more information
* See file:Documentation/input/rotary-encoder.txt for more information
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as

2
drivers/leds/Kconfig
View File

@ -400,7 +400,7 @@ config LEDS_TRIGGER_TIMER
This allows LEDs to be controlled by a programmable timer
via sysfs. Some LED hardware can be programmed to start
blinking the LED without any further software interaction.
For more details read Documentation/leds-class.txt.
For more details read Documentation/leds/leds-class.txt.
If unsure, say Y.

2
drivers/media/dvb/dvb-usb/af9005-remote.c
View File

@ -21,7 +21,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* see Documentation/dvb/REDME.dvb-usb for more information
* see Documentation/dvb/README.dvb-usb for more information
*/
#include "af9005.h"
/* debug */

2
drivers/media/dvb/dvb-usb/af9005.c
View File

@ -19,7 +19,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* see Documentation/dvb/REDME.dvb-usb for more information
* see Documentation/dvb/README.dvb-usb for more information
*/
#include "af9005.h"

2
drivers/media/dvb/frontends/dib3000.h
View File

@ -17,7 +17,7 @@
* Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver
* sources, on which this driver (and the dvb-dibusb) are based.
*
* see Documentation/dvb/README.dibusb for more information
* see Documentation/dvb/README.dvb-usb for more information
*
*/

2
drivers/media/dvb/frontends/dib3000mb.c
View File

@ -17,7 +17,7 @@
* Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver
* sources, on which this driver (and the dvb-dibusb) are based.
*
* see Documentation/dvb/README.dibusb for more information
* see Documentation/dvb/README.dvb-usb for more information
*
*/

2
drivers/mtd/Kconfig
View File

@ -142,7 +142,7 @@ config MTD_OF_PARTS
help
This provides a partition parsing function which derives
the partition map from the children of the flash node,
as described in Documentation/powerpc/booting-without-of.txt.
as described in Documentation/devicetree/booting-without-of.txt.
config MTD_AR7_PARTS
tristate "TI AR7 partitioning support"

3
drivers/net/Kconfig
View File

@ -1063,8 +1063,7 @@ config SMSC911X
Say Y here if you want support for SMSC LAN911x and LAN921x families
of ethernet controllers.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
To compile this driver as a module, choose M here. The module
will be called smsc911x.
config SMSC911X_ARCH_HOOKS

2
drivers/net/can/sja1000/sja1000_of_platform.c
View File

@ -29,7 +29,7 @@
* nxp,external-clock-frequency = <16000000>;
* };
*
* See "Documentation/powerpc/dts-bindings/can/sja1000.txt" for further
* See "Documentation/devicetree/bindings/net/can/sja1000.txt" for further
* information.
*/

3
drivers/net/tulip/21142.c
View File

@ -7,9 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
for more information on this driver.
DC21143 manual "21143 PCI/CardBus 10/100Mb/s Ethernet LAN Controller
Hardware Reference Manual" is currently available at :
http://developer.intel.com/design/network/manuals/278074.htm

2
drivers/net/tulip/eeprom.c
View File

@ -7,8 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
for more information on this driver.
Please submit bug reports to http://bugzilla.kernel.org/.
*/

3
drivers/net/tulip/interrupt.c
View File

@ -7,10 +7,7 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
for more information on this driver.
Please submit bugs to http://bugzilla.kernel.org/ .
*/
#include <linux/pci.h>

3
drivers/net/tulip/media.c
View File

@ -7,9 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
for more information on this driver.
Please submit bugs to http://bugzilla.kernel.org/ .
*/

3
drivers/net/tulip/pnic.c
View File

@ -7,9 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
for more information on this driver.
Please submit bugs to http://bugzilla.kernel.org/ .
*/

3
drivers/net/tulip/pnic2.c
View File

@ -8,9 +8,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
for more information on this driver.
Please submit bugs to http://bugzilla.kernel.org/ .
*/

3
drivers/net/tulip/timer.c
View File

@ -7,9 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
for more information on this driver.
Please submit bugs to http://bugzilla.kernel.org/ .
*/

3
drivers/net/tulip/tulip.h
View File

@ -7,9 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
for more information on this driver.
Please submit bugs to http://bugzilla.kernel.org/ .
*/

3
drivers/net/tulip/tulip_core.c
View File

@ -6,9 +6,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
for more information on this driver.
Please submit bugs to http://bugzilla.kernel.org/ .
*/

16
drivers/parisc/sba_iommu.c
View File

@ -668,7 +668,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
* @dev: instance of PCI owned by the driver that's asking
* @mask: number of address bits this PCI device can handle
*
* See Documentation/PCI/PCI-DMA-mapping.txt
* See Documentation/DMA-API-HOWTO.txt
*/
static int sba_dma_supported( struct device *dev, u64 mask)
{
@ -680,7 +680,7 @@ static int sba_dma_supported( struct device *dev, u64 mask)
return(0);
}
/* Documentation/PCI/PCI-DMA-mapping.txt tells drivers to try 64-bit
/* Documentation/DMA-API-HOWTO.txt tells drivers to try 64-bit
* first, then fall back to 32-bit if that fails.
* We are just "encouraging" 32-bit DMA masks here since we can
* never allow IOMMU bypass unless we add special support for ZX1.
@ -706,7 +706,7 @@ static int sba_dma_supported( struct device *dev, u64 mask)
* @size: number of bytes to map in driver buffer.
* @direction: R/W or both.
*
* See Documentation/PCI/PCI-DMA-mapping.txt
* See Documentation/DMA-API-HOWTO.txt
*/
static dma_addr_t
sba_map_single(struct device *dev, void *addr, size_t size,
@ -785,7 +785,7 @@ sba_map_single(struct device *dev, void *addr, size_t size,
* @size: number of bytes mapped in driver buffer.
* @direction: R/W or both.
*
* See Documentation/PCI/PCI-DMA-mapping.txt
* See Documentation/DMA-API-HOWTO.txt
*/
static void
sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size,
@ -861,7 +861,7 @@ sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size,
* @size: number of bytes mapped in driver buffer.
* @dma_handle: IOVA of new buffer.
*
* See Documentation/PCI/PCI-DMA-mapping.txt
* See Documentation/DMA-API-HOWTO.txt
*/
static void *sba_alloc_consistent(struct device *hwdev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp)
@ -892,7 +892,7 @@ static void *sba_alloc_consistent(struct device *hwdev, size_t size,
* @vaddr: virtual address IOVA of "consistent" buffer.
* @dma_handler: IO virtual address of "consistent" buffer.
*
* See Documentation/PCI/PCI-DMA-mapping.txt
* See Documentation/DMA-API-HOWTO.txt
*/
static void
sba_free_consistent(struct device *hwdev, size_t size, void *vaddr,
@ -927,7 +927,7 @@ int dump_run_sg = 0;
* @nents: number of entries in list
* @direction: R/W or both.
*
* See Documentation/PCI/PCI-DMA-mapping.txt
* See Documentation/DMA-API-HOWTO.txt
*/
static int
sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
@ -1011,7 +1011,7 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
* @nents: number of entries in list
* @direction: R/W or both.
*
* See Documentation/PCI/PCI-DMA-mapping.txt
* See Documentation/DMA-API-HOWTO.txt
*/
static void
sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents,

5
drivers/platform/x86/Kconfig
View File

@ -31,9 +31,6 @@ config ACER_WMI
wireless radio and bluetooth control, and on some laptops,
exposes the mail LED and LCD backlight.
For more information about this driver see
<file:Documentation/laptops/acer-wmi.txt>
If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
here.
@ -164,7 +161,7 @@ config HP_ACCEL
Support for a led indicating disk protection will be provided as
hp::hddprotect. For more information on the feature, refer to
Documentation/hwmon/lis3lv02d.
Documentation/misc-devices/lis3lv02d.
To compile this driver as a module, choose M here: the module will
be called hp_accel.

2
drivers/scsi/megaraid/megaraid_mbox.c
View File

@ -67,7 +67,7 @@
*
* NEC MegaRAID PCI Express ROMB 1000 0408 1033 8287
*
* For history of changes, see Documentation/ChangeLog.megaraid
* For history of changes, see Documentation/scsi/ChangeLog.megaraid
*/
#include <linux/slab.h>

3
drivers/staging/cxt1e1/Kconfig
View File

@ -6,8 +6,7 @@ config CXT1E1
channelized stream WAN adapter card which contains a HDLC/Transparent
mode controller.
If you want to compile this driver as a module
say M here and read <file:Documentation/modules.txt>.
If you want to compile this driver as a module say M here.
The module will be called 'cxt1e1'.
If unsure, say N.

2
drivers/usb/serial/digi_acceleport.c
View File

@ -227,7 +227,7 @@
* - All sleeps use a timeout of DIGI_RETRY_TIMEOUT before looping to
* recheck the condition they are sleeping on. This is defensive,
* in case a wake up is lost.
* - Following Documentation/DocBook/kernel-locking.pdf no spin locks
* - Following Documentation/DocBook/kernel-locking.tmpl no spin locks
* are held when calling copy_to/from_user or printk.
*/

2
drivers/video/igafb.c
View File

@ -428,7 +428,7 @@ static int __init igafb_init(void)
*
* IGS2000 has its I/O memory mapped and we want
* to generate memory cycles on PCI, e.g. do ioremap(),
* then readb/writeb() as in Documentation/IO-mapping.txt.
* then readb/writeb() as in Documentation/io-mapping.txt.
*
* IGS1682 is more traditional, it responds to PCI I/O
* cycles, so we want to access it with inb()/outb().

2
drivers/watchdog/smsc37b787_wdt.c
View File

@ -40,7 +40,7 @@
* mknod /dev/watchdog c 10 130
*
* For an example userspace keep-alive daemon, see:
* Documentation/watchdog/watchdog.txt
* Documentation/watchdog/wdt.txt
*/
#include <linux/module.h>

3
fs/configfs/inode.c
View File

@ -23,7 +23,8 @@
*
* configfs Copyright (C) 2005 Oracle. All rights reserved.
*
* Please see Documentation/filesystems/configfs.txt for more information.
* Please see Documentation/filesystems/configfs/configfs.txt for more
* information.
*/
#undef DEBUG

2
fs/configfs/item.c
View File

@ -23,7 +23,7 @@
*
* configfs Copyright (C) 2005 Oracle. All rights reserved.
*
* Please see the file Documentation/filesystems/configfs.txt for
* Please see the file Documentation/filesystems/configfs/configfs.txt for
* critical information about using the config_item interface.
*/

2
fs/locks.c
View File

@ -60,7 +60,7 @@
*
* Initial implementation of mandatory locks. SunOS turned out to be
* a rotten model, so I implemented the "obvious" semantics.
* See 'Documentation/mandatory.txt' for details.
* See 'Documentation/filesystems/mandatory-locking.txt' for details.
* Andy Walker (andy@lysaker.kvaerner.no), April 06, 1996.
*
* Don't allow mandatory locks on mmap()'ed files. Added simple functions to

6
fs/squashfs/Kconfig
View File

@ -19,9 +19,9 @@ config SQUASHFS
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called squashfs. Note that the root file system (the one
containing the directory /) cannot be compiled as a module.
say M here. The module will be called squashfs. Note that the root
file system (the one containing the directory /) cannot be compiled
as a module.
If unsure, say N.

2
include/linux/io-mapping.h
View File

@ -27,7 +27,7 @@
* The io_mapping mechanism provides an abstraction for mapping
* individual pages from an io device to the CPU in an efficient fashion.
*
* See Documentation/io_mapping.txt
* See Documentation/io-mapping.txt
*/
#ifdef CONFIG_HAVE_ATOMIC_IOMAP

2
include/linux/isdn.h
View File

@ -68,7 +68,7 @@
#define ISDN_NET_ENCAP_SYNCPPP 4
#define ISDN_NET_ENCAP_UIHDLC 5
#define ISDN_NET_ENCAP_CISCOHDLCK 6 /* With SLARP and keepalive */
#define ISDN_NET_ENCAP_X25IFACE 7 /* Documentation/networking/x25-iface.txt*/
#define ISDN_NET_ENCAP_X25IFACE 7 /* Documentation/networking/x25-iface.txt */
#define ISDN_NET_ENCAP_MAX_ENCAP ISDN_NET_ENCAP_X25IFACE
/* Facility which currently uses an ISDN-channel */

2
include/linux/platform_data/ntc_thermistor.h
View File

@ -36,7 +36,7 @@ struct ntc_thermistor_platform_data {
* read_uV()
*
* How to setup pullup_ohm, pulldown_ohm, and connect is
* described at Documentation/hwmon/ntc
* described at Documentation/hwmon/ntc_thermistor
*
* pullup/down_ohm: 0 for infinite / not-connected
*/

2
include/media/videobuf-dma-sg.h
View File

@ -34,7 +34,7 @@
* does memory allocation too using vmalloc_32().
*
* videobuf_dma_*()
* see Documentation/PCI/PCI-DMA-mapping.txt, these functions to
* see Documentation/DMA-API-HOWTO.txt, these functions to
* basically the same. The map function does also build a
* scatterlist for the buffer (and unmap frees it ...)
*

4
include/target/configfs_macros.h
View File

@ -30,8 +30,8 @@
* Added CONFIGFS_EATTR() macros from original configfs.h macros
* Copright (C) 2008-2009 Nicholas A. Bellinger <nab@linux-iscsi.org>
*
* Please read Documentation/filesystems/configfs.txt before using the
* configfs interface, ESPECIALLY the parts about reference counts and
* Please read Documentation/filesystems/configfs/configfs.txt before using
* the configfs interface, ESPECIALLY the parts about reference counts and
* item destructors.
*/

2
net/netfilter/Kconfig
View File

@ -505,7 +505,7 @@ config NETFILTER_XT_TARGET_LED
echo netfilter-ssh > /sys/class/leds/<ledname>/trigger
For more information on the LEDs available on your system, see
Documentation/leds-class.txt
Documentation/leds/leds-class.txt
config NETFILTER_XT_TARGET_MARK
tristate '"MARK" target support'

4
sound/oss/Kconfig
View File

@ -432,9 +432,7 @@ config SOUND_SB
ALS-007 and ALS-1X0 chips (read <file:Documentation/sound/oss/ALS>) and
for cards based on ESS chips (read
<file:Documentation/sound/oss/ESS1868> and
<file:Documentation/sound/oss/ESS>). If you have an SB AWE 32 or SB AWE
64, say Y here and also to "AWE32 synth" below and read
<file:Documentation/sound/oss/INSTALL.awe>. If you have an IBM Mwave
<file:Documentation/sound/oss/ESS>). If you have an IBM Mwave
card, say Y here and read <file:Documentation/sound/oss/mwave>.
If you compile the driver into the kernel and don't want to use

4
tools/perf/util/config.c
View File

@ -341,7 +341,7 @@ const char *perf_config_dirname(const char *name, const char *value)
static int perf_default_core_config(const char *var __used, const char *value __used)
{
/* Add other config variables here and to Documentation/config.txt. */
/* Add other config variables here. */
return 0;
}
@ -350,7 +350,7 @@ int perf_default_config(const char *var, const char *value, void *dummy __used)
if (!prefixcmp(var, "core."))
return perf_default_core_config(var, value);
/* Add other config variables here and to Documentation/config.txt. */
/* Add other config variables here. */
return 0;
}