diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index a5683a84c6e..6013831a043 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -26,12 +26,14 @@ #include #include #include +#include #include #include #include #include #include +#include #include #define OMAP_I2C_SIZE 0x3f @@ -127,6 +129,16 @@ static inline int omap1_i2c_add_bus(int bus_id) #ifdef CONFIG_ARCH_OMAP2PLUS +/* + * XXX This function is a temporary compatibility wrapper - only + * needed until the I2C driver can be converted to call + * omap_pm_set_max_dev_wakeup_lat() and handle a return code. + */ +static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t) +{ + omap_pm_set_max_mpu_wakeup_lat(dev, t); +} + static inline int omap2_i2c_add_bus(int bus_id) { int l; @@ -158,6 +170,15 @@ static inline int omap2_i2c_add_bus(int bus_id) dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr; pdata->flags = dev_attr->flags; + /* + * When waiting for completion of a i2c transfer, we need to + * set a wake up latency constraint for the MPU. This is to + * ensure quick enough wakeup from idle, when transfer + * completes. + * Only omap3 has support for constraints + */ + if (cpu_is_omap34xx()) + pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat; pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(struct omap_i2c_bus_platform_data), NULL, 0, 0); diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index aa59a254be2..c02bf208084 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -39,6 +39,7 @@ #define AT91_TWI_STOP 0x0002 /* Send a Stop Condition */ #define AT91_TWI_MSEN 0x0004 /* Master Transfer Enable */ #define AT91_TWI_SVDIS 0x0020 /* Slave Transfer Disable */ +#define AT91_TWI_QUICK 0x0040 /* SMBus quick command */ #define AT91_TWI_SWRST 0x0080 /* Software Reset */ #define AT91_TWI_MMR 0x0004 /* Master Mode Register */ @@ -212,7 +213,11 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev) INIT_COMPLETION(dev->cmd_complete); dev->transfer_status = 0; - if (dev->msg->flags & I2C_M_RD) { + + if (!dev->buf_len) { + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_QUICK); + at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP); + } else if (dev->msg->flags & I2C_M_RD) { unsigned start_flags = AT91_TWI_START; if (at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_RXRDY) { diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 286ca191782..0670da79ee5 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -287,12 +287,14 @@ read_init_dma_fail: select_init_dma_fail: dma_unmap_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE); select_init_pio_fail: + dmaengine_terminate_all(i2c->dmach); return -EINVAL; /* Write failpath. */ write_init_dma_fail: dma_unmap_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE); write_init_pio_fail: + dmaengine_terminate_all(i2c->dmach); return -EINVAL; } diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index db31eaed6ea..3525c9e62cb 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -43,7 +43,6 @@ #include #include #include -#include /* I2C controller revisions */ #define OMAP_I2C_OMAP1_REV_2 0x20 @@ -187,8 +186,9 @@ struct omap_i2c_dev { int reg_shift; /* bit shift for I2C register addresses */ struct completion cmd_complete; struct resource *ioarea; - u32 latency; /* maximum MPU wkup latency */ - struct pm_qos_request pm_qos_request; + u32 latency; /* maximum mpu wkup latency */ + void (*set_mpu_wkup_lat)(struct device *dev, + long latency); u32 speed; /* Speed of bus in kHz */ u32 dtrev; /* extra revision from DT */ u32 flags; @@ -494,7 +494,9 @@ static void omap_i2c_resize_fifo(struct omap_i2c_dev *dev, u8 size, bool is_rx) dev->b_hw = 1; /* Enable hardware fixes */ /* calculate wakeup latency constraint for MPU */ - dev->latency = (1000000 * dev->threshold) / (1000 * dev->speed / 8); + if (dev->set_mpu_wkup_lat != NULL) + dev->latency = (1000000 * dev->threshold) / + (1000 * dev->speed / 8); } /* @@ -522,6 +524,9 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, dev->buf = msg->buf; dev->buf_len = msg->len; + /* make sure writes to dev->buf_len are ordered */ + barrier(); + omap_i2c_write_reg(dev, OMAP_I2C_CNT_REG, dev->buf_len); /* Clear the FIFO Buffers */ @@ -579,7 +584,6 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, */ timeout = wait_for_completion_timeout(&dev->cmd_complete, OMAP_I2C_TIMEOUT); - dev->buf_len = 0; if (timeout == 0) { dev_err(dev->dev, "controller timed out\n"); omap_i2c_init(dev); @@ -629,16 +633,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) if (r < 0) goto out; - /* - * When waiting for completion of a i2c transfer, we need to - * set a wake up latency constraint for the MPU. This is to - * ensure quick enough wakeup from idle, when transfer - * completes. - */ - if (dev->latency) - pm_qos_add_request(&dev->pm_qos_request, - PM_QOS_CPU_DMA_LATENCY, - dev->latency); + if (dev->set_mpu_wkup_lat != NULL) + dev->set_mpu_wkup_lat(dev->dev, dev->latency); for (i = 0; i < num; i++) { r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1))); @@ -646,8 +642,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) break; } - if (dev->latency) - pm_qos_remove_request(&dev->pm_qos_request); + if (dev->set_mpu_wkup_lat != NULL) + dev->set_mpu_wkup_lat(dev->dev, -1); if (r == 0) r = num; @@ -1104,6 +1100,7 @@ omap_i2c_probe(struct platform_device *pdev) } else if (pdata != NULL) { dev->speed = pdata->clkrate; dev->flags = pdata->flags; + dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat; dev->dtrev = pdata->rev; } @@ -1159,8 +1156,9 @@ omap_i2c_probe(struct platform_device *pdev) dev->b_hw = 1; /* Enable hardware fixes */ /* calculate wakeup latency constraint for MPU */ - dev->latency = (1000000 * dev->fifo_size) / - (1000 * dev->speed / 8); + if (dev->set_mpu_wkup_lat != NULL) + dev->latency = (1000000 * dev->fifo_size) / + (1000 * dev->speed / 8); } /* reset ASAP, clearing any IRQs */ diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 3e0335f1fc6..9d902725bac 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -806,6 +806,7 @@ static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c) dev_err(i2c->dev, "invalid gpio[%d]: %d\n", idx, gpio); goto free_gpio; } + i2c->gpios[idx] = gpio; ret = gpio_request(gpio, "i2c-bus"); if (ret) { diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h index df804ba73e0..92a0dc75bc7 100644 --- a/include/linux/i2c-omap.h +++ b/include/linux/i2c-omap.h @@ -34,6 +34,7 @@ struct omap_i2c_bus_platform_data { u32 clkrate; u32 rev; u32 flags; + void (*set_mpu_wkup_lat)(struct device *dev, long set); }; #endif