leds: Add LED driver for lm3556 chip
LM3556 : The LM3556 is a 4 MHz fixed-frequency synchronous boost converter plus 1.5A constant current driver for a high-current white LED. Datasheet: www.national.com/ds/LM/LM3556.pdf Tested on OMAP4430 (bryan.wu@canonical.com: use module_i2c_driver() rather than lm3556_init/lm3556_exit for code simplicity; fixed some typo pointed out by Rob Landley) Signed-off-by: G.Shark Jeong <gshark.jeong@gmail.com> Reviewed-by: Axel Lin <axel.lin@gmail.com> Reviewed-by: Kim, Milo <Milo.Kim@ti.com> Acked-by: Rob Landley <rob@landley.net> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
This commit is contained in:
G.Shark Jeong
Bryan Wu
parent
1522d02e27
commit
32abb4788d
|
|
@ -6,3 +6,5 @@ leds-lp5521.txt
|
|||
- notes on how to use the leds-lp5521 driver.
|
||||
leds-lp5523.txt
|
||||
- notes on how to use the leds-lp5523 driver.
|
||||
leds-lm3556.txt
|
||||
- notes on how to use the leds-lm3556 driver.
|
||||
|
|
|
|||
|
|
@ -0,0 +1,85 @@
|
|||
Kernel driver for lm3556
|
||||
========================
|
||||
|
||||
*Texas Instrument:
|
||||
1.5 A Synchronous Boost LED Flash Driver w/ High-Side Current Source
|
||||
* Datasheet: http://www.national.com/ds/LM/LM3556.pdf
|
||||
|
||||
Authors:
|
||||
Daniel Jeong
|
||||
Contact:Daniel Jeong(daniel.jeong-at-ti.com, gshark.jeong-at-gmail.com)
|
||||
|
||||
Description
|
||||
-----------
|
||||
There are 3 functions in LM3556, Flash, Torch and Indicator.
|
||||
|
||||
FLASH MODE
|
||||
In Flash Mode, the LED current source(LED) provides 16 target current levels
|
||||
from 93.75 mA to 1500 mA.The Flash currents are adjusted via the CURRENT
|
||||
CONTROL REGISTER(0x09).Flash mode is activated by the ENABLE REGISTER(0x0A),
|
||||
or by pulling the STROBE pin HIGH.
|
||||
LM3556 Flash can be controlled through sys/class/leds/flash/brightness file
|
||||
* if STROBE pin is enabled, below example control brightness only, and
|
||||
ON / OFF will be controlled by STROBE pin.
|
||||
|
||||
Flash Example:
|
||||
OFF : #echo 0 > sys/class/leds/flash/brightness
|
||||
93.75 mA: #echo 1 > sys/class/leds/flash/brightness
|
||||
... .....
|
||||
1500 mA: #echo 16 > sys/class/leds/flash/brightness
|
||||
|
||||
TORCH MODE
|
||||
In Torch Mode, the current source(LED) is programmed via the CURRENT CONTROL
|
||||
REGISTER(0x09).Torch Mode is activated by the ENABLE REGISTER(0x0A) or by the
|
||||
hardware TORCH input.
|
||||
LM3556 torch can be controlled through sys/class/leds/torch/brightness file.
|
||||
* if TORCH pin is enabled, below example control brightness only,
|
||||
and ON / OFF will be controlled by TORCH pin.
|
||||
|
||||
Torch Example:
|
||||
OFF : #echo 0 > sys/class/leds/torch/brightness
|
||||
46.88 mA: #echo 1 > sys/class/leds/torch/brightness
|
||||
... .....
|
||||
375 mA : #echo 8 > sys/class/leds/torch/brightness
|
||||
|
||||
INDICATOR MODE
|
||||
Indicator pattern can be set through sys/class/leds/indicator/pattern file,
|
||||
and 4 patterns are pre-defined in indicator_pattern array.
|
||||
According to N-lank, Pulse time and N Period values, different pattern wiill
|
||||
be generated.If you want new patterns for your own device, change
|
||||
indicator_pattern array with your own values and INDIC_PATTERN_SIZE.
|
||||
Please refer datasheet for more detail about N-Blank, Pulse time and N Period.
|
||||
|
||||
Indicator pattern example:
|
||||
pattern 0: #echo 0 > sys/class/leds/indicator/pattern
|
||||
....
|
||||
pattern 3: #echo 3 > sys/class/leds/indicator/pattern
|
||||
|
||||
Indicator brightness can be controlled through
|
||||
sys/class/leds/indicator/brightness file.
|
||||
|
||||
Example:
|
||||
OFF : #echo 0 > sys/class/leds/indicator/brightness
|
||||
5.86 mA : #echo 1 > sys/class/leds/indicator/brightness
|
||||
........
|
||||
46.875mA : #echo 8 > sys/class/leds/indicator/brightness
|
||||
|
||||
Notes
|
||||
-----
|
||||
Driver expects it is registered using the i2c_board_info mechanism.
|
||||
To register the chip at address 0x63 on specific adapter, set the platform data
|
||||
according to include/linux/platform_data/leds-lm3556.h, set the i2c board info
|
||||
|
||||
Example:
|
||||
static struct i2c_board_info __initdata board_i2c_ch4[] = {
|
||||
{
|
||||
I2C_BOARD_INFO(LM3556_NAME, 0x63),
|
||||
.platform_data = &lm3556_pdata,
|
||||
},
|
||||
};
|
||||
|
||||
and register it in the platform init function
|
||||
|
||||
Example:
|
||||
board_register_i2c_bus(4, 400,
|
||||
board_i2c_ch4, ARRAY_SIZE(board_i2c_ch4));
|
||||
|
|
@ -415,6 +415,14 @@ config LEDS_MAX8997
|
|||
This option enables support for on-chip LED drivers on
|
||||
MAXIM MAX8997 PMIC.
|
||||
|
||||
config LEDS_LM3556
|
||||
tristate "LED support for LM3556 Chip"
|
||||
depends on LEDS_CLASS && I2C
|
||||
select REGMAP_I2C
|
||||
help
|
||||
This option enables support for LEDs connected to LM3556.
|
||||
LM3556 includes Torch, Flash and Indicator functions.
|
||||
|
||||
config LEDS_OT200
|
||||
tristate "LED support for the Bachmann OT200"
|
||||
depends on LEDS_CLASS && HAS_IOMEM
|
||||
|
|
|
|||
|
|
@ -47,6 +47,7 @@ obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
|
|||
obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
|
||||
obj-$(CONFIG_LEDS_RENESAS_TPU) += leds-renesas-tpu.o
|
||||
obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o
|
||||
obj-$(CONFIG_LEDS_LM3556) += leds-lm3556.o
|
||||
|
||||
# LED SPI Drivers
|
||||
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,512 @@
|
|||
/*
|
||||
* Simple driver for Texas Instruments LM3556 LED Flash driver chip (Rev0x03)
|
||||
* Copyright (C) 2012 Texas Instruments
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* Please refer Documentation/leds/leds-lm3556.txt file.
|
||||
*/
|
||||
#include <linux/module.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/fs.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/platform_data/leds-lm3556.h>
|
||||
|
||||
#define REG_FILT_TIME (0x0)
|
||||
#define REG_IVFM_MODE (0x1)
|
||||
#define REG_NTC (0x2)
|
||||
#define REG_INDIC_TIME (0x3)
|
||||
#define REG_INDIC_BLINK (0x4)
|
||||
#define REG_INDIC_PERIOD (0x5)
|
||||
#define REG_TORCH_TIME (0x6)
|
||||
#define REG_CONF (0x7)
|
||||
#define REG_FLASH (0x8)
|
||||
#define REG_I_CTRL (0x9)
|
||||
#define REG_ENABLE (0xA)
|
||||
#define REG_FLAG (0xB)
|
||||
#define REG_MAX (0xB)
|
||||
|
||||
#define IVFM_FILTER_TIME_SHIFT (3)
|
||||
#define UVLO_EN_SHIFT (7)
|
||||
#define HYSTERSIS_SHIFT (5)
|
||||
#define IVM_D_TH_SHIFT (2)
|
||||
#define IVFM_ADJ_MODE_SHIFT (0)
|
||||
#define NTC_EVENT_LVL_SHIFT (5)
|
||||
#define NTC_TRIP_TH_SHIFT (2)
|
||||
#define NTC_BIAS_I_LVL_SHIFT (0)
|
||||
#define INDIC_RAMP_UP_TIME_SHIFT (3)
|
||||
#define INDIC_RAMP_DN_TIME_SHIFT (0)
|
||||
#define INDIC_N_BLANK_SHIFT (4)
|
||||
#define INDIC_PULSE_TIME_SHIFT (0)
|
||||
#define INDIC_N_PERIOD_SHIFT (0)
|
||||
#define TORCH_RAMP_UP_TIME_SHIFT (3)
|
||||
#define TORCH_RAMP_DN_TIME_SHIFT (0)
|
||||
#define STROBE_USUAGE_SHIFT (7)
|
||||
#define STROBE_PIN_POLARITY_SHIFT (6)
|
||||
#define TORCH_PIN_POLARITY_SHIFT (5)
|
||||
#define TX_PIN_POLARITY_SHIFT (4)
|
||||
#define TX_EVENT_LVL_SHIFT (3)
|
||||
#define IVFM_EN_SHIFT (2)
|
||||
#define NTC_MODE_SHIFT (1)
|
||||
#define INDIC_MODE_SHIFT (0)
|
||||
#define INDUCTOR_I_LIMIT_SHIFT (6)
|
||||
#define FLASH_RAMP_TIME_SHIFT (3)
|
||||
#define FLASH_TOUT_TIME_SHIFT (0)
|
||||
#define TORCH_I_SHIFT (4)
|
||||
#define FLASH_I_SHIFT (0)
|
||||
#define NTC_EN_SHIFT (7)
|
||||
#define TX_PIN_EN_SHIFT (6)
|
||||
#define STROBE_PIN_EN_SHIFT (5)
|
||||
#define TORCH_PIN_EN_SHIFT (4)
|
||||
#define PRECHG_MODE_EN_SHIFT (3)
|
||||
#define PASS_MODE_ONLY_EN_SHIFT (2)
|
||||
#define MODE_BITS_SHIFT (0)
|
||||
|
||||
#define IVFM_FILTER_TIME_MASK (0x3)
|
||||
#define UVLO_EN_MASK (0x1)
|
||||
#define HYSTERSIS_MASK (0x3)
|
||||
#define IVM_D_TH_MASK (0x7)
|
||||
#define IVFM_ADJ_MODE_MASK (0x3)
|
||||
#define NTC_EVENT_LVL_MASK (0x1)
|
||||
#define NTC_TRIP_TH_MASK (0x7)
|
||||
#define NTC_BIAS_I_LVL_MASK (0x3)
|
||||
#define INDIC_RAMP_UP_TIME_MASK (0x7)
|
||||
#define INDIC_RAMP_DN_TIME_MASK (0x7)
|
||||
#define INDIC_N_BLANK_MASK (0x7)
|
||||
#define INDIC_PULSE_TIME_MASK (0x7)
|
||||
#define INDIC_N_PERIOD_MASK (0x7)
|
||||
#define TORCH_RAMP_UP_TIME_MASK (0x7)
|
||||
#define TORCH_RAMP_DN_TIME_MASK (0x7)
|
||||
#define STROBE_USUAGE_MASK (0x1)
|
||||
#define STROBE_PIN_POLARITY_MASK (0x1)
|
||||
#define TORCH_PIN_POLARITY_MASK (0x1)
|
||||
#define TX_PIN_POLARITY_MASK (0x1)
|
||||
#define TX_EVENT_LVL_MASK (0x1)
|
||||
#define IVFM_EN_MASK (0x1)
|
||||
#define NTC_MODE_MASK (0x1)
|
||||
#define INDIC_MODE_MASK (0x1)
|
||||
#define INDUCTOR_I_LIMIT_MASK (0x3)
|
||||
#define FLASH_RAMP_TIME_MASK (0x7)
|
||||
#define FLASH_TOUT_TIME_MASK (0x7)
|
||||
#define TORCH_I_MASK (0x7)
|
||||
#define FLASH_I_MASK (0xF)
|
||||
#define NTC_EN_MASK (0x1)
|
||||
#define TX_PIN_EN_MASK (0x1)
|
||||
#define STROBE_PIN_EN_MASK (0x1)
|
||||
#define TORCH_PIN_EN_MASK (0x1)
|
||||
#define PRECHG_MODE_EN_MASK (0x1)
|
||||
#define PASS_MODE_ONLY_EN_MASK (0x1)
|
||||
#define MODE_BITS_MASK (0x13)
|
||||
#define EX_PIN_CONTROL_MASK (0xF1)
|
||||
#define EX_PIN_ENABLE_MASK (0x70)
|
||||
|
||||
enum lm3556_indic_pulse_time {
|
||||
PULSE_TIME_0_MS = 0,
|
||||
PULSE_TIME_32_MS,
|
||||
PULSE_TIME_64_MS,
|
||||
PULSE_TIME_92_MS,
|
||||
PULSE_TIME_128_MS,
|
||||
PULSE_TIME_160_MS,
|
||||
PULSE_TIME_196_MS,
|
||||
PULSE_TIME_224_MS,
|
||||
PULSE_TIME_256_MS,
|
||||
PULSE_TIME_288_MS,
|
||||
PULSE_TIME_320_MS,
|
||||
PULSE_TIME_352_MS,
|
||||
PULSE_TIME_384_MS,
|
||||
PULSE_TIME_416_MS,
|
||||
PULSE_TIME_448_MS,
|
||||
PULSE_TIME_480_MS,
|
||||
};
|
||||
|
||||
enum lm3556_indic_n_blank {
|
||||
INDIC_N_BLANK_0 = 0,
|
||||
INDIC_N_BLANK_1,
|
||||
INDIC_N_BLANK_2,
|
||||
INDIC_N_BLANK_3,
|
||||
INDIC_N_BLANK_4,
|
||||
INDIC_N_BLANK_5,
|
||||
INDIC_N_BLANK_6,
|
||||
INDIC_N_BLANK_7,
|
||||
INDIC_N_BLANK_8,
|
||||
INDIC_N_BLANK_9,
|
||||
INDIC_N_BLANK_10,
|
||||
INDIC_N_BLANK_11,
|
||||
INDIC_N_BLANK_12,
|
||||
INDIC_N_BLANK_13,
|
||||
INDIC_N_BLANK_14,
|
||||
INDIC_N_BLANK_15,
|
||||
};
|
||||
|
||||
enum lm3556_indic_period {
|
||||
INDIC_PERIOD_0 = 0,
|
||||
INDIC_PERIOD_1,
|
||||
INDIC_PERIOD_2,
|
||||
INDIC_PERIOD_3,
|
||||
INDIC_PERIOD_4,
|
||||
INDIC_PERIOD_5,
|
||||
INDIC_PERIOD_6,
|
||||
INDIC_PERIOD_7,
|
||||
};
|
||||
|
||||
enum lm3556_mode {
|
||||
MODES_STASNDBY = 0,
|
||||
MODES_INDIC,
|
||||
MODES_TORCH,
|
||||
MODES_FLASH
|
||||
};
|
||||
|
||||
#define INDIC_PATTERN_SIZE 4
|
||||
|
||||
struct indicator {
|
||||
u8 blinking;
|
||||
u8 period_cnt;
|
||||
};
|
||||
|
||||
struct lm3556_chip_data {
|
||||
struct device *dev;
|
||||
|
||||
struct led_classdev cdev_flash;
|
||||
struct led_classdev cdev_torch;
|
||||
struct led_classdev cdev_indicator;
|
||||
|
||||
struct lm3556_platform_data *pdata;
|
||||
struct regmap *regmap;
|
||||
struct mutex lock;
|
||||
|
||||
unsigned int last_flag;
|
||||
};
|
||||
|
||||
/* indicator pattern */
|
||||
static struct indicator indicator_pattern[INDIC_PATTERN_SIZE] = {
|
||||
[0] = {(INDIC_N_BLANK_1 << INDIC_N_BLANK_SHIFT)
|
||||
| PULSE_TIME_32_MS, INDIC_PERIOD_1},
|
||||
[1] = {(INDIC_N_BLANK_15 << INDIC_N_BLANK_SHIFT)
|
||||
| PULSE_TIME_32_MS, INDIC_PERIOD_2},
|
||||
[2] = {(INDIC_N_BLANK_10 << INDIC_N_BLANK_SHIFT)
|
||||
| PULSE_TIME_32_MS, INDIC_PERIOD_4},
|
||||
[3] = {(INDIC_N_BLANK_5 << INDIC_N_BLANK_SHIFT)
|
||||
| PULSE_TIME_32_MS, INDIC_PERIOD_7},
|
||||
};
|
||||
|
||||
/* chip initialize */
|
||||
static int __devinit lm3556_chip_init(struct lm3556_chip_data *chip)
|
||||
{
|
||||
unsigned int reg_val;
|
||||
int ret;
|
||||
struct lm3556_platform_data *pdata = chip->pdata;
|
||||
|
||||
/* set config register */
|
||||
ret = regmap_read(chip->regmap, REG_CONF, ®_val);
|
||||
if (ret < 0) {
|
||||
dev_err(chip->dev, "Failed to read REG_CONF Register\n");
|
||||
goto out;
|
||||
}
|
||||
|
||||
reg_val &= (~EX_PIN_CONTROL_MASK);
|
||||
reg_val |= ((pdata->torch_pin_polarity & 0x01)
|
||||
<< TORCH_PIN_POLARITY_SHIFT);
|
||||
reg_val |= ((pdata->strobe_usuage & 0x01) << STROBE_USUAGE_SHIFT);
|
||||
reg_val |= ((pdata->strobe_pin_polarity & 0x01)
|
||||
<< STROBE_PIN_POLARITY_SHIFT);
|
||||
reg_val |= ((pdata->tx_pin_polarity & 0x01) << TX_PIN_POLARITY_SHIFT);
|
||||
reg_val |= ((pdata->indicator_mode & 0x01) << INDIC_MODE_SHIFT);
|
||||
|
||||
ret = regmap_write(chip->regmap, REG_CONF, reg_val);
|
||||
if (ret < 0) {
|
||||
dev_err(chip->dev, "Failed to write REG_CONF Regisgter\n");
|
||||
goto out;
|
||||
}
|
||||
|
||||
/* set enable register */
|
||||
ret = regmap_read(chip->regmap, REG_ENABLE, ®_val);
|
||||
if (ret < 0) {
|
||||
dev_err(chip->dev, "Failed to read REG_ENABLE Register\n");
|
||||
goto out;
|
||||
}
|
||||
|
||||
reg_val &= (~EX_PIN_ENABLE_MASK);
|
||||
reg_val |= ((pdata->torch_pin_en & 0x01) << TORCH_PIN_EN_SHIFT);
|
||||
reg_val |= ((pdata->strobe_pin_en & 0x01) << STROBE_PIN_EN_SHIFT);
|
||||
reg_val |= ((pdata->tx_pin_en & 0x01) << TX_PIN_EN_SHIFT);
|
||||
|
||||
ret = regmap_write(chip->regmap, REG_ENABLE, reg_val);
|
||||
if (ret < 0) {
|
||||
dev_err(chip->dev, "Failed to write REG_ENABLE Regisgter\n");
|
||||
goto out;
|
||||
}
|
||||
|
||||
out:
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* chip control */
|
||||
static int lm3556_control(struct lm3556_chip_data *chip,
|
||||
u8 brightness, enum lm3556_mode opmode)
|
||||
{
|
||||
int ret;
|
||||
struct lm3556_platform_data *pdata = chip->pdata;
|
||||
|
||||
ret = regmap_read(chip->regmap, REG_FLAG, &chip->last_flag);
|
||||
if (ret < 0) {
|
||||
dev_err(chip->dev, "Failed to read REG_FLAG Register\n");
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (chip->last_flag)
|
||||
dev_info(chip->dev, "Last FLAG is 0x%x\n", chip->last_flag);
|
||||
|
||||
/* brightness 0 means off-state */
|
||||
if (!brightness)
|
||||
opmode = MODES_STASNDBY;
|
||||
|
||||
switch (opmode) {
|
||||
case MODES_TORCH:
|
||||
ret = regmap_update_bits(chip->regmap, REG_I_CTRL,
|
||||
TORCH_I_MASK << TORCH_I_SHIFT,
|
||||
(brightness - 1) << TORCH_I_SHIFT);
|
||||
|
||||
if (pdata->torch_pin_en)
|
||||
opmode |= (TORCH_PIN_EN_MASK << TORCH_PIN_EN_SHIFT);
|
||||
break;
|
||||
|
||||
case MODES_FLASH:
|
||||
ret = regmap_update_bits(chip->regmap, REG_I_CTRL,
|
||||
FLASH_I_MASK << FLASH_I_SHIFT,
|
||||
(brightness - 1) << FLASH_I_SHIFT);
|
||||
break;
|
||||
|
||||
case MODES_INDIC:
|
||||
ret = regmap_update_bits(chip->regmap, REG_I_CTRL,
|
||||
TORCH_I_MASK << TORCH_I_SHIFT,
|
||||
(brightness - 1) << TORCH_I_SHIFT);
|
||||
break;
|
||||
|
||||
case MODES_STASNDBY:
|
||||
if (pdata->torch_pin_en)
|
||||
opmode |= (TORCH_PIN_EN_MASK << TORCH_PIN_EN_SHIFT);
|
||||
break;
|
||||
|
||||
default:
|
||||
return ret;
|
||||
}
|
||||
if (ret < 0) {
|
||||
dev_err(chip->dev, "Failed to write REG_I_CTRL Register\n");
|
||||
goto out;
|
||||
}
|
||||
ret = regmap_update_bits(chip->regmap, REG_ENABLE,
|
||||
MODE_BITS_MASK << MODE_BITS_SHIFT,
|
||||
opmode << MODE_BITS_SHIFT);
|
||||
|
||||
out:
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* torch */
|
||||
static void lm3556_torch_brightness_set(struct led_classdev *cdev,
|
||||
enum led_brightness brightness)
|
||||
{
|
||||
struct lm3556_chip_data *chip =
|
||||
container_of(cdev, struct lm3556_chip_data, cdev_torch);
|
||||
|
||||
mutex_lock(&chip->lock);
|
||||
lm3556_control(chip, brightness, MODES_TORCH);
|
||||
mutex_unlock(&chip->lock);
|
||||
}
|
||||
|
||||
/* flash */
|
||||
static void lm3556_strobe_brightness_set(struct led_classdev *cdev,
|
||||
enum led_brightness brightness)
|
||||
{
|
||||
struct lm3556_chip_data *chip =
|
||||
container_of(cdev, struct lm3556_chip_data, cdev_flash);
|
||||
|
||||
mutex_lock(&chip->lock);
|
||||
lm3556_control(chip, brightness, MODES_FLASH);
|
||||
mutex_unlock(&chip->lock);
|
||||
}
|
||||
|
||||
/* indicator */
|
||||
static void lm3556_indicator_brightness_set(struct led_classdev *cdev,
|
||||
enum led_brightness brightness)
|
||||
{
|
||||
struct lm3556_chip_data *chip =
|
||||
container_of(cdev, struct lm3556_chip_data, cdev_indicator);
|
||||
|
||||
mutex_lock(&chip->lock);
|
||||
lm3556_control(chip, brightness, MODES_INDIC);
|
||||
mutex_unlock(&chip->lock);
|
||||
}
|
||||
|
||||
/* indicator pattern */
|
||||
static ssize_t lm3556_indicator_pattern_store(struct device *dev,
|
||||
struct device_attribute *devAttr,
|
||||
const char *buf, size_t size)
|
||||
{
|
||||
ssize_t ret;
|
||||
struct led_classdev *led_cdev = dev_get_drvdata(dev);
|
||||
struct lm3556_chip_data *chip =
|
||||
container_of(led_cdev, struct lm3556_chip_data, cdev_indicator);
|
||||
unsigned int state;
|
||||
|
||||
ret = kstrtouint(buf, 10, &state);
|
||||
if (ret)
|
||||
goto out;
|
||||
if (state > INDIC_PATTERN_SIZE - 1)
|
||||
state = INDIC_PATTERN_SIZE - 1;
|
||||
|
||||
ret = regmap_write(chip->regmap, REG_INDIC_BLINK,
|
||||
indicator_pattern[state].blinking);
|
||||
if (ret < 0) {
|
||||
dev_err(chip->dev, "Failed to write REG_ENABLE Regisgter\n");
|
||||
goto out;
|
||||
}
|
||||
|
||||
ret = regmap_write(chip->regmap, REG_INDIC_PERIOD,
|
||||
indicator_pattern[state].period_cnt);
|
||||
if (ret < 0) {
|
||||
dev_err(chip->dev, "Failed to write REG_ENABLE Regisgter\n");
|
||||
goto out;
|
||||
}
|
||||
|
||||
return size;
|
||||
out:
|
||||
dev_err(chip->dev, "Indicator pattern doesn't saved\n");
|
||||
return size;
|
||||
}
|
||||
|
||||
static DEVICE_ATTR(pattern, 0666, NULL, lm3556_indicator_pattern_store);
|
||||
|
||||
static const struct regmap_config lm3556_regmap = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
.max_register = REG_MAX,
|
||||
};
|
||||
|
||||
/* module initialize */
|
||||
static int __devinit lm3556_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct lm3556_platform_data *pdata = client->dev.platform_data;
|
||||
struct lm3556_chip_data *chip;
|
||||
|
||||
int err;
|
||||
|
||||
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
|
||||
dev_err(&client->dev, "i2c functionality check fail.\n");
|
||||
return -EOPNOTSUPP;
|
||||
}
|
||||
|
||||
if (pdata == NULL) {
|
||||
dev_err(&client->dev, "Needs Platform Data.\n");
|
||||
return -ENODATA;
|
||||
}
|
||||
|
||||
chip =
|
||||
devm_kzalloc(&client->dev, sizeof(struct lm3556_chip_data),
|
||||
GFP_KERNEL);
|
||||
if (!chip)
|
||||
return -ENOMEM;
|
||||
|
||||
chip->dev = &client->dev;
|
||||
chip->pdata = pdata;
|
||||
|
||||
chip->regmap = devm_regmap_init_i2c(client, &lm3556_regmap);
|
||||
if (IS_ERR(chip->regmap)) {
|
||||
err = PTR_ERR(chip->regmap);
|
||||
dev_err(&client->dev, "Failed to allocate register map: %d\n",
|
||||
err);
|
||||
return err;
|
||||
}
|
||||
|
||||
mutex_init(&chip->lock);
|
||||
i2c_set_clientdata(client, chip);
|
||||
|
||||
err = lm3556_chip_init(chip);
|
||||
if (err < 0)
|
||||
goto err_out;
|
||||
|
||||
/* flash */
|
||||
chip->cdev_flash.name = "flash";
|
||||
chip->cdev_flash.max_brightness = 16;
|
||||
chip->cdev_flash.brightness_set = lm3556_strobe_brightness_set;
|
||||
err = led_classdev_register((struct device *)
|
||||
&client->dev, &chip->cdev_flash);
|
||||
if (err < 0)
|
||||
goto err_out;
|
||||
/* torch */
|
||||
chip->cdev_torch.name = "torch";
|
||||
chip->cdev_torch.max_brightness = 8;
|
||||
chip->cdev_torch.brightness_set = lm3556_torch_brightness_set;
|
||||
err = led_classdev_register((struct device *)
|
||||
&client->dev, &chip->cdev_torch);
|
||||
if (err < 0)
|
||||
goto err_create_torch_file;
|
||||
/* indicator */
|
||||
chip->cdev_indicator.name = "indicator";
|
||||
chip->cdev_indicator.max_brightness = 8;
|
||||
chip->cdev_indicator.brightness_set = lm3556_indicator_brightness_set;
|
||||
err = led_classdev_register((struct device *)
|
||||
&client->dev, &chip->cdev_indicator);
|
||||
if (err < 0)
|
||||
goto err_create_indicator_file;
|
||||
|
||||
err = device_create_file(chip->cdev_indicator.dev, &dev_attr_pattern);
|
||||
if (err < 0)
|
||||
goto err_create_pattern_file;
|
||||
|
||||
dev_info(&client->dev, "LM3556 is initialized\n");
|
||||
return 0;
|
||||
|
||||
err_create_pattern_file:
|
||||
led_classdev_unregister(&chip->cdev_indicator);
|
||||
err_create_indicator_file:
|
||||
led_classdev_unregister(&chip->cdev_torch);
|
||||
err_create_torch_file:
|
||||
led_classdev_unregister(&chip->cdev_flash);
|
||||
err_out:
|
||||
return err;
|
||||
}
|
||||
|
||||
static int __devexit lm3556_remove(struct i2c_client *client)
|
||||
{
|
||||
struct lm3556_chip_data *chip = i2c_get_clientdata(client);
|
||||
|
||||
device_remove_file(chip->cdev_indicator.dev, &dev_attr_pattern);
|
||||
led_classdev_unregister(&chip->cdev_indicator);
|
||||
led_classdev_unregister(&chip->cdev_torch);
|
||||
led_classdev_unregister(&chip->cdev_flash);
|
||||
regmap_write(chip->regmap, REG_ENABLE, 0);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id lm3556_id[] = {
|
||||
{LM3556_NAME, 0},
|
||||
{}
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(i2c, lm3556_id);
|
||||
|
||||
static struct i2c_driver lm3556_i2c_driver = {
|
||||
.driver = {
|
||||
.name = LM3556_NAME,
|
||||
.owner = THIS_MODULE,
|
||||
.pm = NULL,
|
||||
},
|
||||
.probe = lm3556_probe,
|
||||
.remove = __devexit_p(lm3556_remove),
|
||||
.id_table = lm3556_id,
|
||||
};
|
||||
|
||||
module_i2c_driver(lm3556_i2c_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM3556");
|
||||
MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>");
|
||||
MODULE_AUTHOR("G.Shark Jeong <gshark.jeong@gmail.com>");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
|
|
@ -0,0 +1,50 @@
|
|||
/*
|
||||
* Simple driver for Texas Instruments LM3556 LED Flash driver chip (Rev0x03)
|
||||
* Copyright (C) 2012 Texas Instruments
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef __LINUX_LM3556_H
|
||||
#define __LINUX_LM3556_H
|
||||
|
||||
#define LM3556_NAME "leds-lm3556"
|
||||
|
||||
enum lm3556_pin_polarity {
|
||||
PIN_LOW_ACTIVE = 0,
|
||||
PIN_HIGH_ACTIVE,
|
||||
};
|
||||
|
||||
enum lm3556_pin_enable {
|
||||
PIN_DISABLED = 0,
|
||||
PIN_ENABLED,
|
||||
};
|
||||
|
||||
enum lm3556_strobe_usuage {
|
||||
STROBE_EDGE_DETECT = 0,
|
||||
STROBE_LEVEL_DETECT,
|
||||
};
|
||||
|
||||
enum lm3556_indic_mode {
|
||||
INDIC_MODE_INTERNAL = 0,
|
||||
INDIC_MODE_EXTERNAL,
|
||||
};
|
||||
|
||||
struct lm3556_platform_data {
|
||||
enum lm3556_pin_enable torch_pin_en;
|
||||
enum lm3556_pin_polarity torch_pin_polarity;
|
||||
|
||||
enum lm3556_strobe_usuage strobe_usuage;
|
||||
enum lm3556_pin_enable strobe_pin_en;
|
||||
enum lm3556_pin_polarity strobe_pin_polarity;
|
||||
|
||||
enum lm3556_pin_enable tx_pin_en;
|
||||
enum lm3556_pin_polarity tx_pin_polarity;
|
||||
|
||||
enum lm3556_indic_mode indicator_mode;
|
||||
};
|
||||
|
||||
#endif /* __LINUX_LM3556_H */
|
||||
Reference in New Issue