dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

arm-soc: soc specific changes, part 2 

This adds support for the spear13xx platform, which has first been under
 review a long time ago and finally been completed after generic spear
 work has gone into the clock, dt and pinctrl branches.
 
 Also a number of updates for the samsung socs are part of this branch.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPuezDAAoJEIwa5zzehBx3mooP/iTHd1wRjr2MzKNx4+LpLWgl
 aAXH002xe9Lvu7m75BRvEYWWdRLkyEy9ARM4s2wJCnxU41KmbF65ED1erxK8xaSe
 Ako34vzH+HiUCM2DLzIP6FXyJMM7OcfrdGaY/GxOv+U+MzGUHeu3Q+8b0B/yfBnm
 M3HdDrpyZHKZP9UM3wVQ4/ilDck6vEjYSV2jC11IaHiDMRD2nSpfRKh8H3+gv65S
 gtj9EZpWM8CZg/fCe5lsm3PZnBnqHHW3WVafVnDQfGWeJYqZxMB5QKLU6qf/ntpx
 LU2WjXoGaMmGBVZWynrwNEY6GVp3fZrDV30/q8Htf0/fBpEjUncrLHXtw0DxkpnK
 UuyoRgn7zxOc3kDzohFNIexp1K3q+PNzXklR9hg7OSVji+9bPd2LIOEnpBeghBGj
 WzZIebz5dIdddHlnOl4fRdmxZva2UTuI4bFAJ0izi10Mup7A9lrENnFHG/iVA0rQ
 QlqJZoyeDCvbXQqZCgHirYRPhIxXdQj4G5IivfRxQ7Jgjy76Kt9uDp1egwezF/3a
 2jVtcK42XokVv3Dhsvq9UNFn9GWdVImZ7eh70XLv+q834zAVxSzjWLtlS8I1Q5WO
 7BGIJaICtugNwgYr44Dif6nsoVUmMnSwU5hVw1pApKZspN6EhMhMdp2hw8JPHFUs
 mrZdHi1NAWuYSbObc3UB
 =W2Ri
 -----END PGP SIGNATURE-----

Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc: soc specific changes (part 2) from Olof Johansson:
 "This adds support for the spear13xx platform, which has first been
  under review a long time ago and finally been completed after generic
  spear work has gone into the clock, dt and pinctrl branches.

  Also a number of updates for the samsung socs are part of this branch."

Fix up trivial conflicts in drivers/gpio/gpio-samsung.c that look much
worse than they are: the exonys5 init code was refactored in commit
fd454997d6 ("gpio: samsung: refactor gpiolib init for exynos4/5"), and
then commit f10590c983 ("ARM: EXYNOS: add GPC4 bank instance") added a
new gpio chip define and did tiny updates to the init code.

So the conflict diff looks like hell, but it's actually a fairly simple
change.

* tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits)
  ARM: exynos: fix building with CONFIG_OF disabled
  ARM: EXYNOS: Add AUXDATA for i2c controllers
  ARM: dts: Update device tree source files for EXYNOS5250
  ARM: EXYNOS: Add device tree support for interrupt combiner
  ARM: EXYNOS: Add irq_domain support for interrupt combiner
  ARM: EXYNOS: Remove a new bus_type instance for EXYNOS5
  ARM: EXYNOS: update irqs for EXYNOS5250 SoC
  ARM: EXYNOS: Add pre-divider and fout mux clocks for bpll and mpll
  ARM: EXYNOS: add GPC4 bank instance
  ARM: EXYNOS: Redefine IRQ_MCT_L0,1 definition
  ARM: EXYNOS: Modify the GIC physical address for static io-mapping
  ARM: EXYNOS: Add watchdog timer clock instance
  pinctrl: SPEAr1310: Fix pin numbers for clcd_high_res
  SPEAr: Update MAINTAINERS and Documentation
  SPEAr13xx: Add defconfig
  SPEAr13xx: Add compilation support
  SPEAr13xx: Add dts and dtsi files
  pinctrl: Add SPEAr13xx pinctrl drivers
  pinctrl: SPEAr: Create macro for declaring GPIO PINS
  SPEAr13xx: Add common clock framework support
  ...
This commit is contained in:
Linus Torvalds 2012-05-26 13:05:55 -07:00
parent 84a442b9a1 820f3dd796
commit 30b842889e
81 changed files with 9649 additions and 304 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

32
Documentation/arm/SPEAr/overview.txt
View File

@ -8,9 +8,8 @@ Introduction
weblink : http://www.st.com/spear
The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are
supported by the 'spear' platform of ARM Linux. Currently SPEAr300,
SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Support for the SPEAr13XX
series is in progress.
supported by the 'spear' platform of ARM Linux. Currently SPEAr1310,
SPEAr1340, SPEAr300, SPEAr310, SPEAr320 and SPEAr600 SOCs are supported.
Hierarchy in SPEAr is as follows:
@ -26,33 +25,36 @@ Introduction
- SPEAr600 (SOC)
- SPEAr600 Evaluation Board
- SPEAr13XX (13XX SOC series, based on ARM CORTEXA9)
- SPEAr1300 (SOC)
- SPEAr1310 (SOC)
- SPEAr1310 Evaluation Board
- SPEAr1340 (SOC)
- SPEAr1340 Evaluation Board
Configuration
-------------
A generic configuration is provided for each machine, and can be used as the
default by
make spear600_defconfig
make spear300_defconfig
make spear310_defconfig
make spear320_defconfig
make spear13xx_defconfig
make spear3xx_defconfig
make spear6xx_defconfig
Layout
------
The common files for multiple machine families (SPEAr3XX, SPEAr6XX and
SPEAr13XX) are located in the platform code contained in arch/arm/plat-spear
The common files for multiple machine families (SPEAr3xx, SPEAr6xx and
SPEAr13xx) are located in the platform code contained in arch/arm/plat-spear
with headers in plat/.
Each machine series have a directory with name arch/arm/mach-spear followed by
series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx.
Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for
spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine
specific files, like spear300.c, spear310.c, spear320.c and spear600.c.
mach-spear* doesn't contains board specific files as they fully support
Flattened Device Tree.
Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c, for
spear6xx is mach-spear6xx/spear6xx.c and for spear13xx family is
mach-spear13xx/spear13xx.c. mach-spear* also contain soc/machine specific
files, like spear1310.c, spear1340.c spear300.c, spear310.c, spear320.c and
spear600.c. mach-spear* doesn't contains board specific files as they fully
support Flattened Device Tree.
Document Author

52
Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt Normal file
View File

@ -0,0 +1,52 @@
* Samsung Exynos Interrupt Combiner Controller
Samsung's Exynos4 architecture includes a interrupt combiner controller which
can combine interrupt sources as a group and provide a single interrupt request
for the group. The interrupt request from each group are connected to a parent
interrupt controller, such as GIC in case of Exynos4210.
The interrupt combiner controller consists of multiple combiners. Upto eight
interrupt sources can be connected to a combiner. The combiner outputs one
combined interrupt for its eight interrupt sources. The combined interrupt
is usually connected to a parent interrupt controller.
A single node in the device tree is used to describe the interrupt combiner
controller module (which includes multiple combiners). A combiner in the
interrupt controller module shares config/control registers with other
combiners. For example, a 32-bit interrupt enable/disable config register
can accommodate upto 4 interrupt combiners (with each combiner supporting
upto 8 interrupt sources).
Required properties:
- compatible: should be "samsung,exynos4210-combiner".
- interrupt-controller: Identifies the node as an interrupt controller.
- #interrupt-cells: should be <2>. The meaning of the cells are
* First Cell: Combiner Group Number.
* Second Cell: Interrupt number within the group.
- reg: Base address and size of interrupt combiner registers.
- interrupts: The list of interrupts generated by the combiners which are then
connected to a parent interrupt controller. The format of the interrupt
specifier depends in the interrupt parent controller.
Optional properties:
- samsung,combiner-nr: The number of interrupt combiners supported. If this
property is not specified, the default number of combiners is assumed
to be 16.
- interrupt-parent: pHandle of the parent interrupt controller, if not
inherited from the parent node.
Example:
The following is a an example from the Exynos4210 SoC dtsi file.
combiner:interrupt-controller@10440000 {
compatible = "samsung,exynos4210-combiner";
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x10440000 0x1000>;
interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
};

16
Documentation/devicetree/bindings/arm/spear.txt
View File

@ -2,25 +2,25 @@ ST SPEAr Platforms Device Tree Bindings
---------------------------------------
Boards with the ST SPEAr600 SoC shall have the following properties:
Required root node property:
compatible = "st,spear600";
Boards with the ST SPEAr300 SoC shall have the following properties:
Required root node property:
compatible = "st,spear300";
Boards with the ST SPEAr310 SoC shall have the following properties:
Required root node property:
compatible = "st,spear310";
Boards with the ST SPEAr320 SoC shall have the following properties:
Required root node property:
compatible = "st,spear320";
Boards with the ST SPEAr1310 SoC shall have the following properties:
Required root node property:
compatible = "st,spear1310";
Boards with the ST SPEAr1340 SoC shall have the following properties:
Required root node property:
compatible = "st,spear1340";

47
Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt
View File

@ -4,6 +4,8 @@ Required properties:
- compatible : "st,spear300-pinmux"
: "st,spear310-pinmux"
: "st,spear320-pinmux"
: "st,spear1310-pinmux"
: "st,spear1340-pinmux"
- reg : Address range of the pinctrl registers
- st,pinmux-mode: Mandatory for SPEAr300 and SPEAr320 and invalid for others.
- Its values for SPEAr300:
@ -89,6 +91,37 @@ For SPEAr320 machines:
"rmii0_1_grp", "i2c1_8_9_grp", "i2c1_98_99_grp", "i2c2_0_1_grp",
"i2c2_2_3_grp", "i2c2_19_20_grp", "i2c2_75_76_grp", "i2c2_96_97_grp"
For SPEAr1310 machines:
"i2c0_grp", "ssp0_grp", "ssp0_cs0_grp", "ssp0_cs1_2_grp", "i2s0_grp",
"i2s1_grp", "clcd_grp", "clcd_high_res_grp", "arm_gpio_grp",
"smi_2_chips_grp", "smi_4_chips_grp", "gmii_grp", "rgmii_grp",
"smii_0_1_2_grp", "ras_mii_txclk_grp", "nand_8bit_grp",
"nand_16bit_grp", "nand_4_chips_grp", "keyboard_6x6_grp",
"keyboard_rowcol6_8_grp", "uart0_grp", "uart0_modem_grp",
"gpt0_tmr0_grp", "gpt0_tmr1_grp", "gpt1_tmr0_grp", "gpt1_tmr1_grp",
"sdhci_grp", "cf_grp", "xd_grp", "touch_xy_grp",
"uart1_disable_i2c_grp", "uart1_disable_sd_grp", "uart2_3_grp",
"uart4_grp", "uart5_grp", "rs485_0_1_tdm_0_1_grp", "i2c_1_2_grp",
"i2c3_dis_smi_clcd_grp", "i2c3_dis_sd_i2s0_grp", "i2c_4_5_dis_smi_grp",
"i2c4_dis_sd_grp", "i2c5_dis_sd_grp", "i2c_6_7_dis_kbd_grp",
"i2c6_dis_sd_grp", "i2c7_dis_sd_grp", "can0_dis_nor_grp",
"can0_dis_sd_grp", "can1_dis_sd_grp", "can1_dis_kbd_grp", "pcie0_grp",
"pcie1_grp", "pcie2_grp", "sata0_grp", "sata1_grp", "sata2_grp",
"ssp1_dis_kbd_grp", "ssp1_dis_sd_grp", "gpt64_grp"
For SPEAr1340 machines:
"pads_as_gpio_grp", "fsmc_8bit_grp", "fsmc_16bit_grp", "fsmc_pnor_grp",
"keyboard_row_col_grp", "keyboard_col5_grp", "spdif_in_grp",
"spdif_out_grp", "gpt_0_1_grp", "pwm0_grp", "pwm1_grp", "pwm2_grp",
"pwm3_grp", "vip_mux_grp", "vip_mux_cam0_grp", "vip_mux_cam1_grp",
"vip_mux_cam2_grp", "vip_mux_cam3_grp", "cam0_grp", "cam1_grp",
"cam2_grp", "cam3_grp", "smi_grp", "ssp0_grp", "ssp0_cs1_grp",
"ssp0_cs2_grp", "ssp0_cs3_grp", "uart0_grp", "uart0_enh_grp",
"uart1_grp", "i2s_in_grp", "i2s_out_grp", "gmii_grp", "rgmii_grp",
"rmii_grp", "sgmii_grp", "i2c0_grp", "i2c1_grp", "cec0_grp", "cec1_grp",
"sdhci_grp", "cf_grp", "xd_grp", "clcd_grp", "arm_trace_grp",
"miphy_dbg_grp", "pcie_grp", "sata_grp"
Valid values for function names are:
For All SPEAr3xx machines:
"firda", "i2c0", "ssp_cs", "ssp0", "mii0", "gpio0", "uart0_ext",
@ -106,3 +139,17 @@ For SPEAr320 machines:
"uart2", "uart3", "uart4", "uart5", "uart6", "rs485", "touchscreen",
"can0", "can1", "pwm0_1", "pwm2", "pwm3", "ssp1", "ssp2", "mii2",
"mii0_1", "i2c1", "i2c2"
For SPEAr1310 machines:
"i2c0", "ssp0", "i2s0", "i2s1", "clcd", "arm_gpio", "smi", "gmii",
"rgmii", "smii_0_1_2", "ras_mii_txclk", "nand", "keyboard", "uart0",
"gpt0", "gpt1", "sdhci", "cf", "xd", "touchscreen", "uart1", "uart2_3",
"uart4", "uart5", "rs485_0_1_tdm_0_1", "i2c_1_2", "i2c3_i2s1",
"i2c_4_5", "i2c_6_7", "can0", "can1", "pci", "sata", "ssp1", "gpt64"
For SPEAr1340 machines:
"pads_as_gpio", "fsmc", "keyboard", "spdif_in", "spdif_out", "gpt_0_1",
"pwm", "vip", "cam0", "cam1", "cam2", "cam3", "smi", "ssp0", "uart0",
"uart1", "i2s", "gmac", "i2c0", "i2c1", "cec0", "cec1", "sdhci", "cf",
"xd", "clcd", "arm_trace", "miphy_dbg", "pcie", "sata"

13
MAINTAINERS
View File

@ -6350,14 +6350,25 @@ F: include/linux/compiler.h
SPEAR PLATFORM SUPPORT
M: Viresh Kumar <viresh.kumar@st.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
S: Maintained
F: arch/arm/plat-spear/
SPEAR13XX MACHINE SUPPORT
M: Viresh Kumar <viresh.kumar@st.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
S: Maintained
F: arch/arm/mach-spear13xx/
SPEAR3XX MACHINE SUPPORT
M: Viresh Kumar <viresh.kumar@st.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
@ -6366,6 +6377,8 @@ F: arch/arm/mach-spear3xx/
SPEAR6XX MACHINE SUPPORT
M: Rajeev Kumar <rajeev-dlh.kumar@st.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
M: Viresh Kumar <viresh.kumar@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear

2
arch/arm/Makefile
View File

@ -186,6 +186,8 @@ machine-$(CONFIG_ARCH_VEXPRESS) := vexpress
machine-$(CONFIG_ARCH_VT8500) := vt8500
machine-$(CONFIG_ARCH_W90X900) := w90x900
machine-$(CONFIG_FOOTBRIDGE) := footbridge
machine-$(CONFIG_MACH_SPEAR1310) := spear13xx
machine-$(CONFIG_MACH_SPEAR1340) := spear13xx
machine-$(CONFIG_MACH_SPEAR300) := spear3xx
machine-$(CONFIG_MACH_SPEAR310) := spear3xx
machine-$(CONFIG_MACH_SPEAR320) := spear3xx

48
arch/arm/boot/dts/exynos5250-smdk5250.dts
View File

@ -23,4 +23,52 @@
chosen {
bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200";
};
i2c@12C60000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
gpios = <&gpb3 0 2 3 0>,
<&gpb3 1 2 3 0>;
eeprom@50 {
compatible = "samsung,s524ad0xd1";
reg = <0x50>;
};
};
i2c@12C70000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
gpios = <&gpb3 2 2 3 0>,
<&gpb3 3 2 3 0>;
eeprom@51 {
compatible = "samsung,s524ad0xd1";
reg = <0x51>;
};
};
i2c@12C80000 {
status = "disabled";
};
i2c@12C90000 {
status = "disabled";
};
i2c@12CA0000 {
status = "disabled";
};
i2c@12CB0000 {
status = "disabled";
};
i2c@12CC0000 {
status = "disabled";
};
i2c@12CD0000 {
status = "disabled";
};
};

60
arch/arm/boot/dts/exynos5250.dtsi
View File

@ -23,11 +23,11 @@
compatible = "samsung,exynos5250";
interrupt-parent = <&gic>;
gic:interrupt-controller@10490000 {
gic:interrupt-controller@10481000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x10490000 0x1000>, <0x10480000 0x100>;
reg = <0x10481000 0x1000>, <0x10482000 0x2000>;
};
watchdog {
@ -42,30 +42,6 @@
interrupts = <0 43 0>, <0 44 0>;
};
sdhci@12200000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12200000 0x100>;
interrupts = <0 75 0>;
};
sdhci@12210000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12210000 0x100>;
interrupts = <0 76 0>;
};
sdhci@12220000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12220000 0x100>;
interrupts = <0 77 0>;
};
sdhci@12230000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12230000 0x100>;
interrupts = <0 78 0>;
};
serial@12C00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
@ -94,48 +70,64 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x12C60000 0x100>;
interrupts = <0 56 0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@12C70000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C70000 0x100>;
interrupts = <0 57 0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@12C80000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C80000 0x100>;
interrupts = <0 58 0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@12C90000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C90000 0x100>;
interrupts = <0 59 0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@12CA0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CA0000 0x100>;
interrupts = <0 60 0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@12CB0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CB0000 0x100>;
interrupts = <0 61 0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@12CC0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CC0000 0x100>;
interrupts = <0 62 0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@12CD0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CD0000 0x100>;
interrupts = <0 63 0>;
#address-cells = <1>;
#size-cells = <0>;
};
amba {
@ -157,13 +149,13 @@
interrupts = <0 35 0>;
};
mdma0: pdma@10800000 {
mdma0: mdma@10800000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
interrupts = <0 33 0>;
};
mdma1: pdma@11C10000 {
mdma1: mdma@11C10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
interrupts = <0 124 0>;
@ -242,6 +234,12 @@
#gpio-cells = <4>;
};
gpc4: gpio-controller@114002E0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114002E0 0x20>;
#gpio-cells = <4>;
};
gpd0: gpio-controller@11400160 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400160 0x20>;
@ -388,19 +386,19 @@
gpv2: gpio-controller@10D10040 {
compatible = "samsung,exynos4-gpio";
reg = <0x10D10040 0x20>;
reg = <0x10D10060 0x20>;
#gpio-cells = <4>;
};
gpv3: gpio-controller@10D10060 {
compatible = "samsung,exynos4-gpio";
reg = <0x10D10060 0x20>;
reg = <0x10D10080 0x20>;
#gpio-cells = <4>;
};
gpv4: gpio-controller@10D10080 {
compatible = "samsung,exynos4-gpio";
reg = <0x10D10080 0x20>;
reg = <0x10D100C0 0x20>;
#gpio-cells = <4>;
};

292
arch/arm/boot/dts/spear1310-evb.dts Normal file
View File

@ -0,0 +1,292 @@
/*
* DTS file for SPEAr1310 Evaluation Baord
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "spear1310.dtsi"
/ {
model = "ST SPEAr1310 Evaluation Board";
compatible = "st,spear1310-evb", "st,spear1310";
#address-cells = <1>;
#size-cells = <1>;
memory {
reg = <0 0x40000000>;
};
ahb {
pinmux@e0700000 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
i2c0-pmx {
st,pins = "i2c0_grp";
st,function = "i2c0";
};
i2s1 {
st,pins = "i2s1_grp";
st,function = "i2s1";
};
gpio {
st,pins = "arm_gpio_grp";
st,function = "arm_gpio";
};
eth {
st,pins = "gmii_grp";
st,function = "gmii";
};
ssp0 {
st,pins = "ssp0_grp";
st,function = "ssp0";
};
kbd {
st,pins = "keyboard_6x6_grp";
st,function = "keyboard";
};
sdhci {
st,pins = "sdhci_grp";
st,function = "sdhci";
};
smi-pmx {
st,pins = "smi_2_chips_grp";
st,function = "smi";
};
uart0 {
st,pins = "uart0_grp";
st,function = "uart0";
};
rs485 {
st,pins = "rs485_0_1_tdm_0_1_grp";
st,function = "rs485_0_1_tdm_0_1";
};
i2c1_2 {
st,pins = "i2c_1_2_grp";
st,function = "i2c_1_2";
};
pci {
st,pins = "pcie0_grp","pcie1_grp",
"pcie2_grp";
st,function = "pci";
};
smii {
st,pins = "smii_0_1_2_grp";
st,function = "smii_0_1_2";
};
nand {
st,pins = "nand_8bit_grp",
"nand_16bit_grp";
st,function = "nand";
};
};
};
ahci@b1000000 {
status = "okay";
};
cf@b2800000 {
status = "okay";
};
dma@ea800000 {
status = "okay";
};
dma@eb000000 {
status = "okay";
};
fsmc: flash@b0000000 {
status = "okay";
};
gmac0: eth@e2000000 {
status = "okay";
};
sdhci@b3000000 {
status = "okay";
};
smi: flash@ea000000 {
status = "okay";
clock-rate=<50000000>;
flash@e6000000 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xe6000000 0x800000>;
st,smi-fast-mode;
partition@0 {
label = "xloader";
reg = <0x0 0x10000>;
};
partition@10000 {
label = "u-boot";
reg = <0x10000 0x40000>;
};
partition@50000 {
label = "linux";
reg = <0x50000 0x2c0000>;
};
partition@310000 {
label = "rootfs";
reg = <0x310000 0x4f0000>;
};
};
};
spi0: spi@e0100000 {
status = "okay";
};
ehci@e4800000 {
status = "okay";
};
ehci@e5800000 {
status = "okay";
};
ohci@e4000000 {
status = "okay";
};
ohci@e5000000 {
status = "okay";
};
apb {
adc@e0080000 {
status = "okay";
};
gpio0: gpio@e0600000 {
status = "okay";
};
gpio1: gpio@e0680000 {
status = "okay";
};
i2c0: i2c@e0280000 {
status = "okay";
};
i2c1: i2c@5cd00000 {
status = "okay";
};
kbd@e0300000 {
linux,keymap = < 0x00000001
0x00010002
0x00020003
0x00030004
0x00040005
0x00050006
0x00060007
0x00070008
0x00080009
0x0100000a
0x0101000c
0x0102000d
0x0103000e
0x0104000f
0x01050010
0x01060011
0x01070012
0x01080013
0x02000014
0x02010015
0x02020016
0x02030017
0x02040018
0x02050019
0x0206001a
0x0207001b
0x0208001c
0x0300001d
0x0301001e
0x0302001f
0x03030020
0x03040021
0x03050022
0x03060023
0x03070024
0x03080025
0x04000026
0x04010027
0x04020028
0x04030029
0x0404002a
0x0405002b
0x0406002c
0x0407002d
0x0408002e
0x0500002f
0x05010030
0x05020031
0x05030032
0x05040033
0x05050034
0x05060035
0x05070036
0x05080037
0x06000038
0x06010039
0x0602003a
0x0603003b
0x0604003c
0x0605003d
0x0606003e
0x0607003f
0x06080040
0x07000041
0x07010042
0x07020043
0x07030044
0x07040045
0x07050046
0x07060047
0x07070048
0x07080049
0x0800004a
0x0801004b
0x0802004c
0x0803004d
0x0804004e
0x0805004f
0x08060050
0x08070051
0x08080052 >;
autorepeat;
st,mode = <0>;
status = "okay";
};
rtc@e0580000 {
status = "okay";
};
serial@e0000000 {
status = "okay";
};
wdt@ec800620 {
status = "okay";
};
};
};
};

184
arch/arm/boot/dts/spear1310.dtsi Normal file
View File

@ -0,0 +1,184 @@
/*
* DTS file for all SPEAr1310 SoCs
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "spear13xx.dtsi"
/ {
compatible = "st,spear1310";
ahb {
ahci@b1000000 {
compatible = "snps,spear-ahci";
reg = <0xb1000000 0x10000>;
interrupts = <0 68 0x4>;
status = "disabled";
};
ahci@b1800000 {
compatible = "snps,spear-ahci";
reg = <0xb1800000 0x10000>;
interrupts = <0 69 0x4>;
status = "disabled";
};
ahci@b4000000 {
compatible = "snps,spear-ahci";
reg = <0xb4000000 0x10000>;
interrupts = <0 70 0x4>;
status = "disabled";
};
gmac1: eth@5c400000 {
compatible = "st,spear600-gmac";
reg = <0x5c400000 0x8000>;
interrupts = <0 95 0x4>;
interrupt-names = "macirq";
status = "disabled";
};
gmac2: eth@5c500000 {
compatible = "st,spear600-gmac";
reg = <0x5c500000 0x8000>;
interrupts = <0 96 0x4>;
interrupt-names = "macirq";
status = "disabled";
};
gmac3: eth@5c600000 {
compatible = "st,spear600-gmac";
reg = <0x5c600000 0x8000>;
interrupts = <0 97 0x4>;
interrupt-names = "macirq";
status = "disabled";
};
gmac4: eth@5c700000 {
compatible = "st,spear600-gmac";
reg = <0x5c700000 0x8000>;
interrupts = <0 98 0x4>;
interrupt-names = "macirq";
status = "disabled";
};
spi1: spi@5d400000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x5d400000 0x1000>;
interrupts = <0 99 0x4>;
status = "disabled";
};
apb {
i2c1: i2c@5cd00000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x5cd00000 0x1000>;
interrupts = <0 87 0x4>;
status = "disabled";
};
i2c2: i2c@5ce00000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x5ce00000 0x1000>;
interrupts = <0 88 0x4>;
status = "disabled";
};
i2c3: i2c@5cf00000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x5cf00000 0x1000>;
interrupts = <0 89 0x4>;
status = "disabled";
};
i2c4: i2c@5d000000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x5d000000 0x1000>;
interrupts = <0 90 0x4>;
status = "disabled";
};
i2c5: i2c@5d100000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x5d100000 0x1000>;
interrupts = <0 91 0x4>;
status = "disabled";
};
i2c6: i2c@5d200000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x5d200000 0x1000>;
interrupts = <0 92 0x4>;
status = "disabled";
};
i2c7: i2c@5d300000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x5d300000 0x1000>;
interrupts = <0 93 0x4>;
status = "disabled";
};
serial@5c800000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x5c800000 0x1000>;
interrupts = <0 82 0x4>;
status = "disabled";
};
serial@5c900000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x5c900000 0x1000>;
interrupts = <0 83 0x4>;
status = "disabled";
};
serial@5ca00000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x5ca00000 0x1000>;
interrupts = <0 84 0x4>;
status = "disabled";
};
serial@5cb00000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x5cb00000 0x1000>;
interrupts = <0 85 0x4>;
status = "disabled";
};
serial@5cc00000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x5cc00000 0x1000>;
interrupts = <0 86 0x4>;
status = "disabled";
};
thermal@e07008c4 {
st,thermal-flags = <0x7000>;
};
};
};
};

308
arch/arm/boot/dts/spear1340-evb.dts Normal file
View File

@ -0,0 +1,308 @@
/*
* DTS file for SPEAr1340 Evaluation Baord
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "spear1340.dtsi"
/ {
model = "ST SPEAr1340 Evaluation Board";
compatible = "st,spear1340-evb", "st,spear1340";
#address-cells = <1>;
#size-cells = <1>;
memory {
reg = <0 0x40000000>;
};
ahb {
pinmux@e0700000 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
pads_as_gpio {
st,pins = "pads_as_gpio_grp";
st,function = "pads_as_gpio";
};
fsmc {
st,pins = "fsmc_8bit_grp";
st,function = "fsmc";
};
kbd {
st,pins = "keyboard_row_col_grp",
"keyboard_col5_grp";
st,function = "keyboard";
};
uart0 {
st,pins = "uart0_grp", "uart0_enh_grp";
st,function = "uart0";
};
i2c0-pmx {
st,pins = "i2c0_grp";
st,function = "i2c0";
};
i2c1-pmx {
st,pins = "i2c1_grp";
st,function = "i2c1";
};
spdif-in {
st,pins = "spdif_in_grp";
st,function = "spdif_in";
};
spdif-out {
st,pins = "spdif_out_grp";
st,function = "spdif_out";
};
ssp0 {
st,pins = "ssp0_grp", "ssp0_cs1_grp",
"ssp0_cs3_grp";
st,function = "ssp0";
};
pwm {
st,pins = "pwm2_grp", "pwm3_grp";
st,function = "pwm";
};
smi-pmx {
st,pins = "smi_grp";
st,function = "smi";
};
i2s {
st,pins = "i2s_in_grp", "i2s_out_grp";
st,function = "i2s";
};
gmac {
st,pins = "gmii_grp", "rgmii_grp";
st,function = "gmac";
};
cam3 {
st,pins = "cam3_grp";
st,function = "cam3";
};
cec0 {
st,pins = "cec0_grp";
st,function = "cec0";
};
cec1 {
st,pins = "cec1_grp";
st,function = "cec1";
};
sdhci {
st,pins = "sdhci_grp";
st,function = "sdhci";
};
clcd {
st,pins = "clcd_grp";
st,function = "clcd";
};
sata {
st,pins = "sata_grp";
st,function = "sata";
};
};
};
dma@ea800000 {
status = "okay";
};
dma@eb000000 {
status = "okay";
};
fsmc: flash@b0000000 {
status = "okay";
};
gmac0: eth@e2000000 {
status = "okay";
};
sdhci@b3000000 {
status = "okay";
};
smi: flash@ea000000 {
status = "okay";
clock-rate=<50000000>;
flash@e6000000 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xe6000000 0x800000>;
st,smi-fast-mode;
partition@0 {
label = "xloader";
reg = <0x0 0x10000>;
};
partition@10000 {
label = "u-boot";
reg = <0x10000 0x40000>;
};
partition@50000 {
label = "linux";
reg = <0x50000 0x2c0000>;
};
partition@310000 {
label = "rootfs";
reg = <0x310000 0x4f0000>;
};
};
};
spi0: spi@e0100000 {
status = "okay";
};
ehci@e4800000 {
status = "okay";
};
ehci@e5800000 {
status = "okay";
};
ohci@e4000000 {
status = "okay";
};
ohci@e5000000 {
status = "okay";
};
apb {
adc@e0080000 {
status = "okay";
};
gpio0: gpio@e0600000 {
status = "okay";
};
gpio1: gpio@e0680000 {
status = "okay";
};
i2c0: i2c@e0280000 {
status = "okay";
};
i2c1: i2c@b4000000 {
status = "okay";
};
kbd@e0300000 {
linux,keymap = < 0x00000001
0x00010002
0x00020003
0x00030004
0x00040005
0x00050006
0x00060007
0x00070008
0x00080009
0x0100000a
0x0101000c
0x0102000d
0x0103000e
0x0104000f
0x01050010
0x01060011
0x01070012
0x01080013
0x02000014
0x02010015
0x02020016
0x02030017
0x02040018
0x02050019
0x0206001a
0x0207001b
0x0208001c
0x0300001d
0x0301001e
0x0302001f
0x03030020
0x03040021
0x03050022
0x03060023
0x03070024
0x03080025
0x04000026
0x04010027
0x04020028
0x04030029
0x0404002a
0x0405002b
0x0406002c
0x0407002d
0x0408002e
0x0500002f
0x05010030
0x05020031
0x05030032
0x05040033
0x05050034
0x05060035
0x05070036
0x05080037
0x06000038
0x06010039
0x0602003a
0x0603003b
0x0604003c
0x0605003d
0x0606003e
0x0607003f
0x06080040
0x07000041
0x07010042
0x07020043
0x07030044
0x07040045
0x07050046
0x07060047
0x07070048
0x07080049
0x0800004a
0x0801004b
0x0802004c
0x0803004d
0x0804004e
0x0805004f
0x08060050
0x08070051
0x08080052 >;
autorepeat;
st,mode = <0>;
status = "okay";
};
rtc@e0580000 {
status = "okay";
};
serial@e0000000 {
status = "okay";
};
serial@b4100000 {
status = "okay";
};
wdt@ec800620 {
status = "okay";
};
};
};
};

56
arch/arm/boot/dts/spear1340.dtsi Normal file
View File

@ -0,0 +1,56 @@
/*
* DTS file for all SPEAr1340 SoCs
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "spear13xx.dtsi"
/ {
compatible = "st,spear1340";
ahb {
ahci@b1000000 {
compatible = "snps,spear-ahci";
reg = <0xb1000000 0x10000>;
interrupts = <0 72 0x4>;
status = "disabled";
};
spi1: spi@5d400000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x5d400000 0x1000>;
interrupts = <0 99 0x4>;
status = "disabled";
};
apb {
i2c1: i2c@b4000000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xb4000000 0x1000>;
interrupts = <0 104 0x4>;
status = "disabled";
};
serial@b4100000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xb4100000 0x1000>;
interrupts = <0 105 0x4>;
status = "disabled";
};
thermal@e07008c4 {
st,thermal-flags = <0x2a00>;
};
};
};
};

262
arch/arm/boot/dts/spear13xx.dtsi Normal file
View File

@ -0,0 +1,262 @@
/*
* DTS file for all SPEAr13xx SoCs
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
/ {
interrupt-parent = <&gic>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a9";
reg = <0>;
next-level-cache = <&L2>;
};
cpu@1 {
compatible = "arm,cortex-a9";
reg = <1>;
next-level-cache = <&L2>;
};
};
gic: interrupt-controller@ec801000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
#interrupt-cells = <3>;
reg = < 0xec801000 0x1000 >,
< 0xec800100 0x0100 >;
};
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <0 8 0x04
0 9 0x04>;
};
L2: l2-cache {
compatible = "arm,pl310-cache";
reg = <0xed000000 0x1000>;
cache-unified;
cache-level = <2>;
};
memory {
name = "memory";
device_type = "memory";
reg = <0 0x40000000>;
};
chosen {
bootargs = "console=ttyAMA0,115200";
};
ahb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0x50000000 0x50000000 0x10000000
0xb0000000 0xb0000000 0x10000000
0xe0000000 0xe0000000 0x10000000>;
sdhci@b3000000 {
compatible = "st,sdhci-spear";
reg = <0xb3000000 0x100>;
interrupts = <0 28 0x4>;
status = "disabled";
};
cf@b2800000 {
compatible = "arasan,cf-spear1340";
reg = <0xb2800000 0x100>;
interrupts = <0 29 0x4>;
status = "disabled";
};
dma@ea800000 {
compatible = "snps,dma-spear1340";
reg = <0xea800000 0x1000>;
interrupts = <0 19 0x4>;
status = "disabled";
};
dma@eb000000 {
compatible = "snps,dma-spear1340";
reg = <0xeb000000 0x1000>;
interrupts = <0 59 0x4>;
status = "disabled";
};
fsmc: flash@b0000000 {
compatible = "st,spear600-fsmc-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb0000000 0x1000 /* FSMC Register */
0xb0800000 0x0010>; /* NAND Base */
reg-names = "fsmc_regs", "nand_data";
interrupts = <0 20 0x4
0 21 0x4
0 22 0x4
0 23 0x4>;
st,ale-off = <0x20000>;
st,cle-off = <0x10000>;
status = "disabled";
};
gmac0: eth@e2000000 {
compatible = "st,spear600-gmac";
reg = <0xe2000000 0x8000>;
interrupts = <0 23 0x4
0 24 0x4>;
interrupt-names = "macirq", "eth_wake_irq";
status = "disabled";
};
smi: flash@ea000000 {
compatible = "st,spear600-smi";
#address-cells = <1>;
#size-cells = <1>;
reg = <0xea000000 0x1000>;
interrupts = <0 30 0x4>;
status = "disabled";
};
spi0: spi@e0100000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xe0100000 0x1000>;
interrupts = <0 31 0x4>;
status = "disabled";
};
ehci@e4800000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe4800000 0x1000>;
interrupts = <0 64 0x4>;
status = "disabled";
};
ehci@e5800000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe5800000 0x1000>;
interrupts = <0 66 0x4>;
status = "disabled";
};
ohci@e4000000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe4000000 0x1000>;
interrupts = <0 65 0x4>;
status = "disabled";
};
ohci@e5000000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe5000000 0x1000>;
interrupts = <0 67 0x4>;
status = "disabled";
};
apb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0x50000000 0x50000000 0x10000000
0xb0000000 0xb0000000 0x10000000
0xe0000000 0xe0000000 0x10000000>;
gpio0: gpio@e0600000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xe0600000 0x1000>;
interrupts = <0 24 0x4>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio1: gpio@e0680000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xe0680000 0x1000>;
interrupts = <0 25 0x4>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
kbd@e0300000 {
compatible = "st,spear300-kbd";
reg = <0xe0300000 0x1000>;
status = "disabled";
};
i2c0: i2c@e0280000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xe0280000 0x1000>;
interrupts = <0 41 0x4>;
status = "disabled";
};
rtc@e0580000 {
compatible = "st,spear-rtc";
reg = <0xe0580000 0x1000>;
interrupts = <0 36 0x4>;
status = "disabled";
};
serial@e0000000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xe0000000 0x1000>;
interrupts = <0 36 0x4>;
status = "disabled";
};
adc@e0080000 {
compatible = "st,spear600-adc";
reg = <0xe0080000 0x1000>;
interrupts = <0 44 0x4>;
status = "disabled";
};
timer@e0380000 {
compatible = "st,spear-timer";
reg = <0xe0380000 0x400>;
interrupts = <0 37 0x4>;
};
timer@ec800600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xec800600 0x20>;
interrupts = <1 13 0x301>;
};
wdt@ec800620 {
compatible = "arm,cortex-a9-twd-wdt";
reg = <0xec800620 0x20>;
status = "disabled";
};
thermal@e07008c4 {
compatible = "st,thermal-spear1340";
reg = <0xe07008c4 0x4>;
};
};
};
};

95
arch/arm/configs/spear13xx_defconfig Normal file
View File

@ -0,0 +1,95 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_PLAT_SPEAR=y
CONFIG_ARCH_SPEAR13XX=y
CONFIG_MACH_SPEAR1310=y
CONFIG_MACH_SPEAR1340=y
# CONFIG_SWP_EMULATE is not set
CONFIG_SMP=y
# CONFIG_SMP_ON_UP is not set
# CONFIG_ARM_CPU_TOPOLOGY is not set
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_FSMC=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_ATA=y
# CONFIG_SATA_PMP is not set
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_PATA_ARASAN_CF=y
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
CONFIG_STMMAC_ETH=y
# CONFIG_WLAN is not set
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_SPEAR=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_I2C=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_PL061=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_MPCORE_WATCHDOG=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SPEAR=y
CONFIG_RTC_CLASS=y
CONFIG_DMADEVICES=y
CONFIG_DW_DMAC=y
CONFIG_DMATEST=m
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_AUTOFS4_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=m
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_INFO=y

14
arch/arm/mach-exynos/Kconfig
View File

@ -61,6 +61,7 @@ config SOC_EXYNOS5250
bool "SAMSUNG EXYNOS5250"
default y
depends on ARCH_EXYNOS5
select SAMSUNG_DMADEV
help
Enable EXYNOS5250 SoC support
@ -70,7 +71,7 @@ config EXYNOS4_MCT
help
Use MCT (Multi Core Timer) as kernel timers
config EXYNOS4_DEV_DMA
config EXYNOS_DEV_DMA
bool
help
Compile in amba device definitions for DMA controller
@ -80,6 +81,11 @@ config EXYNOS4_DEV_AHCI
help
Compile in platform device definitions for AHCI
config EXYNOS_DEV_DRM
bool
help
Compile in platform device definitions for core DRM device
config EXYNOS4_SETUP_FIMD0
bool
help
@ -161,7 +167,7 @@ config EXYNOS4_SETUP_USB_PHY
help
Common setup code for USB PHY controller
config EXYNOS4_SETUP_SPI
config EXYNOS_SETUP_SPI
bool
help
Common setup code for SPI GPIO configurations.
@ -224,7 +230,7 @@ config MACH_ARMLEX4210
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select EXYNOS4_DEV_AHCI
select EXYNOS4_DEV_DMA
select EXYNOS_DEV_DMA
select EXYNOS4_SETUP_SDHCI
help
Machine support for Samsung ARMLEX4210 based on EXYNOS4210
@ -362,7 +368,7 @@ config MACH_SMDK4212
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
select EXYNOS_DEV_SYSMMU
select EXYNOS4_DEV_DMA
select EXYNOS_DEV_DMA
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C7

7
arch/arm/mach-exynos/Makefile
View File

@ -50,10 +50,11 @@ obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o
obj-y += dev-uart.o
obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o
obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o
obj-$(CONFIG_EXYNOS_DEV_SYSMMU) += dev-sysmmu.o
obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o
obj-$(CONFIG_EXYNOS4_DEV_DMA) += dma.o
obj-$(CONFIG_EXYNOS_DEV_DMA) += dma.o
obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o
obj-$(CONFIG_EXYNOS_DEV_DRM) += dev-drm.o
obj-$(CONFIG_EXYNOS_DEV_SYSMMU) += dev-sysmmu.o
obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o
@ -68,4 +69,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_I2C7) += setup-i2c7.o
obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o
obj-$(CONFIG_EXYNOS4_SETUP_SPI) += setup-spi.o
obj-$(CONFIG_EXYNOS_SETUP_SPI) += setup-spi.o

3
arch/arm/mach-exynos/Makefile.boot
View File

@ -1,2 +1,5 @@
zreladdr-y += 0x40008000
params_phys-y := 0x40000100
dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb
dtb-$(CONFIG_MACH_EXYNOS5_DT) += exynos5250-smdk5250.dtb

10
arch/arm/mach-exynos/clock-exynos4212.c
View File

@ -92,6 +92,16 @@ static struct clk init_clocks_off[] = {
.devname = SYSMMU_CLOCK_DEVNAME(isp, 9),
.enable = exynos4212_clk_ip_isp1_ctrl,
.ctrlbit = (1 << 4),
}, {
.name = "flite",
.devname = "exynos-fimc-lite.0",
.enable = exynos4212_clk_ip_isp0_ctrl,
.ctrlbit = (1 << 4),
}, {
.name = "flite",
.devname = "exynos-fimc-lite.1",
.enable = exynos4212_clk_ip_isp0_ctrl,
.ctrlbit = (1 << 3),
}
};

51
arch/arm/mach-exynos/clock-exynos5.c
View File

@ -165,11 +165,29 @@ static struct clksrc_clk exynos5_clk_sclk_apll = {
.reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 24, .size = 3 },
};
static struct clksrc_clk exynos5_clk_mout_bpll_fout = {
.clk = {
.name = "mout_bpll_fout",
},
.sources = &clk_src_bpll_fout,
.reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 0, .size = 1 },
};
static struct clk *exynos5_clk_src_bpll_list[] = {
[0] = &clk_fin_bpll,
[1] = &exynos5_clk_mout_bpll_fout.clk,
};
static struct clksrc_sources exynos5_clk_src_bpll = {
.sources = exynos5_clk_src_bpll_list,
.nr_sources = ARRAY_SIZE(exynos5_clk_src_bpll_list),
};
static struct clksrc_clk exynos5_clk_mout_bpll = {
.clk = {
.name = "mout_bpll",
},
.sources = &clk_src_bpll,
.sources = &exynos5_clk_src_bpll,
.reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 0, .size = 1 },
};
@ -207,11 +225,29 @@ static struct clksrc_clk exynos5_clk_mout_epll = {
.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 12, .size = 1 },
};
static struct clksrc_clk exynos5_clk_mout_mpll_fout = {
.clk = {
.name = "mout_mpll_fout",
},
.sources = &clk_src_mpll_fout,
.reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 4, .size = 1 },
};
static struct clk *exynos5_clk_src_mpll_list[] = {
[0] = &clk_fin_mpll,
[1] = &exynos5_clk_mout_mpll_fout.clk,
};
static struct clksrc_sources exynos5_clk_src_mpll = {
.sources = exynos5_clk_src_mpll_list,
.nr_sources = ARRAY_SIZE(exynos5_clk_src_mpll_list),
};
struct clksrc_clk exynos5_clk_mout_mpll = {
.clk = {
.name = "mout_mpll",
},
.sources = &clk_src_mpll,
.sources = &exynos5_clk_src_mpll,
.reg_src = { .reg = EXYNOS5_CLKSRC_CORE1, .shift = 8, .size = 1 },
};
@ -473,6 +509,11 @@ static struct clk exynos5_init_clocks_off[] = {
.parent = &exynos5_clk_aclk_66.clk,
.enable = exynos5_clk_ip_peris_ctrl,
.ctrlbit = (1 << 20),
}, {
.name = "watchdog",
.parent = &exynos5_clk_aclk_66.clk,
.enable = exynos5_clk_ip_peris_ctrl,
.ctrlbit = (1 << 19),
}, {
.name = "hsmmc",
.devname = "exynos4-sdhci.0",
@ -1031,10 +1072,12 @@ static struct clksrc_clk *exynos5_sysclks[] = {
&exynos5_clk_mout_apll,
&exynos5_clk_sclk_apll,
&exynos5_clk_mout_bpll,
&exynos5_clk_mout_bpll_fout,
&exynos5_clk_mout_bpll_user,
&exynos5_clk_mout_cpll,
&exynos5_clk_mout_epll,
&exynos5_clk_mout_mpll,
&exynos5_clk_mout_mpll_fout,
&exynos5_clk_mout_mpll_user,
&exynos5_clk_vpllsrc,
&exynos5_clk_sclk_vpll,
@ -1098,7 +1141,9 @@ static struct clk *exynos5_clks[] __initdata = {
&exynos5_clk_sclk_hdmi27m,
&exynos5_clk_sclk_hdmiphy,
&clk_fout_bpll,
&clk_fout_bpll_div2,
&clk_fout_cpll,
&clk_fout_mpll_div2,
&exynos5_clk_armclk,
};
@ -1263,8 +1308,10 @@ void __init_or_cpufreq exynos5_setup_clocks(void)
clk_fout_apll.ops = &exynos5_fout_apll_ops;
clk_fout_bpll.rate = bpll;
clk_fout_bpll_div2.rate = bpll >> 1;
clk_fout_cpll.rate = cpll;
clk_fout_mpll.rate = mpll;
clk_fout_mpll_div2.rate = mpll >> 1;
clk_fout_epll.rate = epll;
clk_fout_vpll.rate = vpll;

182
arch/arm/mach-exynos/common.c
View File

@ -19,6 +19,9 @@
#include <linux/serial_core.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/export.h>
#include <linux/irqdomain.h>
#include <linux/of_address.h>
#include <asm/proc-fns.h>
#include <asm/exception.h>
@ -265,12 +268,12 @@ static struct map_desc exynos5_iodesc[] __initdata = {
}, {
.virtual = (unsigned long)S5P_VA_GIC_CPU,
.pfn = __phys_to_pfn(EXYNOS5_PA_GIC_CPU),
.length = SZ_64K,
.length = SZ_8K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_GIC_DIST,
.pfn = __phys_to_pfn(EXYNOS5_PA_GIC_DIST),
.length = SZ_64K,
.length = SZ_4K,
.type = MT_DEVICE,
},
};
@ -399,6 +402,7 @@ struct combiner_chip_data {
void __iomem *base;
};
static struct irq_domain *combiner_irq_domain;
static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
static inline void __iomem *combiner_base(struct irq_data *data)
@ -411,14 +415,14 @@ static inline void __iomem *combiner_base(struct irq_data *data)
static void combiner_mask_irq(struct irq_data *data)
{
u32 mask = 1 << (data->irq % 32);
u32 mask = 1 << (data->hwirq % 32);
__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
}
static void combiner_unmask_irq(struct irq_data *data)
{
u32 mask = 1 << (data->irq % 32);
u32 mask = 1 << (data->hwirq % 32);
__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
}
@ -474,49 +478,131 @@ static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int i
irq_set_chained_handler(irq, combiner_handle_cascade_irq);
}
static void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
unsigned int irq_start)
static void __init combiner_init_one(unsigned int combiner_nr,
void __iomem *base)
{
unsigned int i;
unsigned int max_nr;
if (soc_is_exynos5250())
max_nr = EXYNOS5_MAX_COMBINER_NR;
else
max_nr = EXYNOS4_MAX_COMBINER_NR;
if (combiner_nr >= max_nr)
BUG();
combiner_data[combiner_nr].base = base;
combiner_data[combiner_nr].irq_offset = irq_start;
combiner_data[combiner_nr].irq_offset = irq_find_mapping(
combiner_irq_domain, combiner_nr * MAX_IRQ_IN_COMBINER);
combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
/* Disable all interrupts */
__raw_writel(combiner_data[combiner_nr].irq_mask,
base + COMBINER_ENABLE_CLEAR);
}
/* Setup the Linux IRQ subsystem */
#ifdef CONFIG_OF
static int combiner_irq_domain_xlate(struct irq_domain *d,
struct device_node *controller,
const u32 *intspec, unsigned int intsize,
unsigned long *out_hwirq,
unsigned int *out_type)
{
if (d->of_node != controller)
return -EINVAL;
for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
+ MAX_IRQ_IN_COMBINER; i++) {
irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
irq_set_chip_data(i, &combiner_data[combiner_nr]);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
if (intsize < 2)
return -EINVAL;
*out_hwirq = intspec[0] * MAX_IRQ_IN_COMBINER + intspec[1];
*out_type = 0;
return 0;
}
#else
static int combiner_irq_domain_xlate(struct irq_domain *d,
struct device_node *controller,
const u32 *intspec, unsigned int intsize,
unsigned long *out_hwirq,
unsigned int *out_type)
{
return -EINVAL;
}
#endif
static int combiner_irq_domain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hw)
{
irq_set_chip_and_handler(irq, &combiner_chip, handle_level_irq);
irq_set_chip_data(irq, &combiner_data[hw >> 3]);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
return 0;
}
static struct irq_domain_ops combiner_irq_domain_ops = {
.xlate = combiner_irq_domain_xlate,
.map = combiner_irq_domain_map,
};
void __init combiner_init(void __iomem *combiner_base, struct device_node *np)
{
int i, irq, irq_base;
unsigned int max_nr, nr_irq;
if (np) {
if (of_property_read_u32(np, "samsung,combiner-nr", &max_nr)) {
pr_warning("%s: number of combiners not specified, "
"setting default as %d.\n",
__func__, EXYNOS4_MAX_COMBINER_NR);
max_nr = EXYNOS4_MAX_COMBINER_NR;
}
} else {
max_nr = soc_is_exynos5250() ? EXYNOS5_MAX_COMBINER_NR :
EXYNOS4_MAX_COMBINER_NR;
}
nr_irq = max_nr * MAX_IRQ_IN_COMBINER;
irq_base = irq_alloc_descs(COMBINER_IRQ(0, 0), 1, nr_irq, 0);
if (IS_ERR_VALUE(irq_base)) {
irq_base = COMBINER_IRQ(0, 0);
pr_warning("%s: irq desc alloc failed. Continuing with %d as linux irq base\n", __func__, irq_base);
}
combiner_irq_domain = irq_domain_add_legacy(np, nr_irq, irq_base, 0,
&combiner_irq_domain_ops, &combiner_data);
if (WARN_ON(!combiner_irq_domain)) {
pr_warning("%s: irq domain init failed\n", __func__);
return;
}
for (i = 0; i < max_nr; i++) {
combiner_init_one(i, combiner_base + (i >> 2) * 0x10);
irq = IRQ_SPI(i);
#ifdef CONFIG_OF
if (np)
irq = irq_of_parse_and_map(np, i);
#endif
combiner_cascade_irq(i, irq);
}
}
#ifdef CONFIG_OF
int __init combiner_of_init(struct device_node *np, struct device_node *parent)
{
void __iomem *combiner_base;
combiner_base = of_iomap(np, 0);
if (!combiner_base) {
pr_err("%s: failed to map combiner registers\n", __func__);
return -ENXIO;
}
combiner_init(combiner_base, np);
return 0;
}
static const struct of_device_id exynos4_dt_irq_match[] = {
{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
{ .compatible = "samsung,exynos4210-combiner",
.data = combiner_of_init, },
{},
};
#endif
void __init exynos4_init_irq(void)
{
int irq;
unsigned int gic_bank_offset;
gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
@ -528,12 +614,8 @@ void __init exynos4_init_irq(void)
of_irq_init(exynos4_dt_irq_match);
#endif
for (irq = 0; irq < EXYNOS4_MAX_COMBINER_NR; irq++) {
combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
COMBINER_IRQ(irq, 0));
combiner_cascade_irq(irq, IRQ_SPI(irq));
}
if (!of_have_populated_dt())
combiner_init(S5P_VA_COMBINER_BASE, NULL);
/*
* The parameters of s5p_init_irq() are for VIC init.
@ -545,18 +627,9 @@ void __init exynos4_init_irq(void)
void __init exynos5_init_irq(void)
{
int irq;
#ifdef CONFIG_OF
of_irq_init(exynos4_dt_irq_match);
#endif
for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) {
combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
COMBINER_IRQ(irq, 0));
combiner_cascade_irq(irq, IRQ_SPI(irq));
}
/*
* The parameters of s5p_init_irq() are for VIC init.
* Theses parameters should be NULL and 0 because EXYNOS4
@ -565,30 +638,18 @@ void __init exynos5_init_irq(void)
s5p_init_irq(NULL, 0);
}
struct bus_type exynos4_subsys = {
.name = "exynos4-core",
.dev_name = "exynos4-core",
};
struct bus_type exynos5_subsys = {
.name = "exynos5-core",
.dev_name = "exynos5-core",
struct bus_type exynos_subsys = {
.name = "exynos-core",
.dev_name = "exynos-core",
};
static struct device exynos4_dev = {
.bus = &exynos4_subsys,
};
static struct device exynos5_dev = {
.bus = &exynos5_subsys,
.bus = &exynos_subsys,
};
static int __init exynos_core_init(void)
{
if (soc_is_exynos5250())
return subsys_system_register(&exynos5_subsys, NULL);
else
return subsys_system_register(&exynos4_subsys, NULL);
return subsys_system_register(&exynos_subsys, NULL);
}
core_initcall(exynos_core_init);
@ -675,10 +736,7 @@ static int __init exynos_init(void)
{
printk(KERN_INFO "EXYNOS: Initializing architecture\n");
if (soc_is_exynos5250())
return device_register(&exynos5_dev);
else
return device_register(&exynos4_dev);
return device_register(&exynos4_dev);
}
/* uart registration process */

29
arch/arm/mach-exynos/dev-drm.c Normal file
View File

@ -0,0 +1,29 @@
/*
* linux/arch/arm/mach-exynos/dev-drm.c
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS - core DRM device
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <plat/devs.h>
static u64 exynos_drm_dma_mask = DMA_BIT_MASK(32);
struct platform_device exynos_device_drm = {
.name = "exynos-drm",
.dev = {
.dma_mask = &exynos_drm_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
}
};

141
arch/arm/mach-exynos/dma.c
View File

@ -103,10 +103,45 @@ static u8 exynos4212_pdma0_peri[] = {
DMACH_MIPI_HSI5,
};
struct dma_pl330_platdata exynos4_pdma0_pdata;
static u8 exynos5250_pdma0_peri[] = {
DMACH_PCM0_RX,
DMACH_PCM0_TX,
DMACH_PCM2_RX,
DMACH_PCM2_TX,
DMACH_SPI0_RX,
DMACH_SPI0_TX,
DMACH_SPI2_RX,
DMACH_SPI2_TX,
DMACH_I2S0S_TX,
DMACH_I2S0_RX,
DMACH_I2S0_TX,
DMACH_I2S2_RX,
DMACH_I2S2_TX,
DMACH_UART0_RX,
DMACH_UART0_TX,
DMACH_UART2_RX,
DMACH_UART2_TX,
DMACH_UART4_RX,
DMACH_UART4_TX,
DMACH_SLIMBUS0_RX,
DMACH_SLIMBUS0_TX,
DMACH_SLIMBUS2_RX,
DMACH_SLIMBUS2_TX,
DMACH_SLIMBUS4_RX,
DMACH_SLIMBUS4_TX,
DMACH_AC97_MICIN,
DMACH_AC97_PCMIN,
DMACH_AC97_PCMOUT,
DMACH_MIPI_HSI0,
DMACH_MIPI_HSI2,
DMACH_MIPI_HSI4,
DMACH_MIPI_HSI6,
};
static AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330,
EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos4_pdma0_pdata);
static struct dma_pl330_platdata exynos_pdma0_pdata;
static AMBA_AHB_DEVICE(exynos_pdma0, "dma-pl330.0", 0x00041330,
EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos_pdma0_pdata);
static u8 exynos4210_pdma1_peri[] = {
DMACH_PCM0_RX,
@ -169,10 +204,45 @@ static u8 exynos4212_pdma1_peri[] = {
DMACH_MIPI_HSI7,
};
static struct dma_pl330_platdata exynos4_pdma1_pdata;
static u8 exynos5250_pdma1_peri[] = {
DMACH_PCM0_RX,
DMACH_PCM0_TX,
DMACH_PCM1_RX,
DMACH_PCM1_TX,
DMACH_SPI1_RX,
DMACH_SPI1_TX,
DMACH_PWM,
DMACH_SPDIF,
DMACH_I2S0S_TX,
DMACH_I2S0_RX,
DMACH_I2S0_TX,
DMACH_I2S1_RX,
DMACH_I2S1_TX,
DMACH_UART0_RX,
DMACH_UART0_TX,
DMACH_UART1_RX,
DMACH_UART1_TX,
DMACH_UART3_RX,
DMACH_UART3_TX,
DMACH_SLIMBUS1_RX,
DMACH_SLIMBUS1_TX,
DMACH_SLIMBUS3_RX,
DMACH_SLIMBUS3_TX,
DMACH_SLIMBUS5_RX,
DMACH_SLIMBUS5_TX,
DMACH_SLIMBUS0AUX_RX,
DMACH_SLIMBUS0AUX_TX,
DMACH_DISP1,
DMACH_MIPI_HSI1,
DMACH_MIPI_HSI3,
DMACH_MIPI_HSI5,
DMACH_MIPI_HSI7,
};
static AMBA_AHB_DEVICE(exynos4_pdma1, "dma-pl330.1", 0x00041330,
EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos4_pdma1_pdata);
static struct dma_pl330_platdata exynos_pdma1_pdata;
static AMBA_AHB_DEVICE(exynos_pdma1, "dma-pl330.1", 0x00041330,
EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos_pdma1_pdata);
static u8 mdma_peri[] = {
DMACH_MTOM_0,
@ -185,46 +255,63 @@ static u8 mdma_peri[] = {
DMACH_MTOM_7,
};
static struct dma_pl330_platdata exynos4_mdma1_pdata = {
static struct dma_pl330_platdata exynos_mdma1_pdata = {
.nr_valid_peri = ARRAY_SIZE(mdma_peri),
.peri_id = mdma_peri,
};
static AMBA_AHB_DEVICE(exynos4_mdma1, "dma-pl330.2", 0x00041330,
EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos4_mdma1_pdata);
static AMBA_AHB_DEVICE(exynos_mdma1, "dma-pl330.2", 0x00041330,
EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos_mdma1_pdata);
static int __init exynos4_dma_init(void)
static int __init exynos_dma_init(void)
{
if (of_have_populated_dt())
return 0;
if (soc_is_exynos4210()) {
exynos4_pdma0_pdata.nr_valid_peri =
exynos_pdma0_pdata.nr_valid_peri =
ARRAY_SIZE(exynos4210_pdma0_peri);
exynos4_pdma0_pdata.peri_id = exynos4210_pdma0_peri;
exynos4_pdma1_pdata.nr_valid_peri =
exynos_pdma0_pdata.peri_id = exynos4210_pdma0_peri;
exynos_pdma1_pdata.nr_valid_peri =
ARRAY_SIZE(exynos4210_pdma1_peri);
exynos4_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
exynos4_pdma0_pdata.nr_valid_peri =
exynos_pdma0_pdata.nr_valid_peri =
ARRAY_SIZE(exynos4212_pdma0_peri);
exynos4_pdma0_pdata.peri_id = exynos4212_pdma0_peri;
exynos4_pdma1_pdata.nr_valid_peri =
exynos_pdma0_pdata.peri_id = exynos4212_pdma0_peri;
exynos_pdma1_pdata.nr_valid_peri =
ARRAY_SIZE(exynos4212_pdma1_peri);
exynos4_pdma1_pdata.peri_id = exynos4212_pdma1_peri;
exynos_pdma1_pdata.peri_id = exynos4212_pdma1_peri;
} else if (soc_is_exynos5250()) {
exynos_pdma0_pdata.nr_valid_peri =
ARRAY_SIZE(exynos5250_pdma0_peri);
exynos_pdma0_pdata.peri_id = exynos5250_pdma0_peri;
exynos_pdma1_pdata.nr_valid_peri =
ARRAY_SIZE(exynos5250_pdma1_peri);
exynos_pdma1_pdata.peri_id = exynos5250_pdma1_peri;
exynos_pdma0_device.res.start = EXYNOS5_PA_PDMA0;
exynos_pdma0_device.res.end = EXYNOS5_PA_PDMA0 + SZ_4K;
exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_PDMA0;
exynos_pdma1_device.res.start = EXYNOS5_PA_PDMA1;
exynos_pdma1_device.res.end = EXYNOS5_PA_PDMA1 + SZ_4K;
exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_PDMA1;
exynos_mdma1_device.res.start = EXYNOS5_PA_MDMA1;
exynos_mdma1_device.res.end = EXYNOS5_PA_MDMA1 + SZ_4K;
exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_MDMA1;
}
dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask);
amba_device_register(&exynos4_pdma0_device, &iomem_resource);
dma_cap_set(DMA_SLAVE, exynos_pdma0_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, exynos_pdma0_pdata.cap_mask);
amba_device_register(&exynos_pdma0_device, &iomem_resource);
dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask);
amba_device_register(&exynos4_pdma1_device, &iomem_resource);
dma_cap_set(DMA_SLAVE, exynos_pdma1_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, exynos_pdma1_pdata.cap_mask);
amba_device_register(&exynos_pdma1_device, &iomem_resource);
dma_cap_set(DMA_MEMCPY, exynos4_mdma1_pdata.cap_mask);
amba_device_register(&exynos4_mdma1_device, &iomem_resource);
dma_cap_set(DMA_MEMCPY, exynos_mdma1_pdata.cap_mask);
amba_device_register(&exynos_mdma1_device, &iomem_resource);
return 0;
}
arch_initcall(exynos4_dma_init);
arch_initcall(exynos_dma_init);

9
arch/arm/mach-exynos/include/mach/gpio.h
View File

@ -153,10 +153,11 @@ enum exynos4_gpio_number {
#define EXYNOS5_GPIO_B2_NR (4)
#define EXYNOS5_GPIO_B3_NR (4)
#define EXYNOS5_GPIO_C0_NR (7)
#define EXYNOS5_GPIO_C1_NR (7)
#define EXYNOS5_GPIO_C1_NR (4)
#define EXYNOS5_GPIO_C2_NR (7)
#define EXYNOS5_GPIO_C3_NR (7)
#define EXYNOS5_GPIO_D0_NR (8)
#define EXYNOS5_GPIO_C4_NR (7)
#define EXYNOS5_GPIO_D0_NR (4)
#define EXYNOS5_GPIO_D1_NR (8)
#define EXYNOS5_GPIO_Y0_NR (6)
#define EXYNOS5_GPIO_Y1_NR (4)
@ -199,7 +200,8 @@ enum exynos5_gpio_number {
EXYNOS5_GPIO_C1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C0),
EXYNOS5_GPIO_C2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C1),
EXYNOS5_GPIO_C3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C2),
EXYNOS5_GPIO_D0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C3),
EXYNOS5_GPIO_C4_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C3),
EXYNOS5_GPIO_D0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C4),
EXYNOS5_GPIO_D1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D0),
EXYNOS5_GPIO_Y0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D1),
EXYNOS5_GPIO_Y1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y0),
@ -242,6 +244,7 @@ enum exynos5_gpio_number {
#define EXYNOS5_GPC1(_nr) (EXYNOS5_GPIO_C1_START + (_nr))
#define EXYNOS5_GPC2(_nr) (EXYNOS5_GPIO_C2_START + (_nr))
#define EXYNOS5_GPC3(_nr) (EXYNOS5_GPIO_C3_START + (_nr))
#define EXYNOS5_GPC4(_nr) (EXYNOS5_GPIO_C4_START + (_nr))
#define EXYNOS5_GPD0(_nr) (EXYNOS5_GPIO_D0_START + (_nr))
#define EXYNOS5_GPD1(_nr) (EXYNOS5_GPIO_D1_START + (_nr))
#define EXYNOS5_GPY0(_nr) (EXYNOS5_GPIO_Y0_START + (_nr))

40
arch/arm/mach-exynos/include/mach/irqs.h
View File

@ -287,6 +287,7 @@
#define EXYNOS5_IRQ_MIPICSI1 IRQ_SPI(80)
#define EXYNOS5_IRQ_EFNFCON_DMA_ABORT IRQ_SPI(81)
#define EXYNOS5_IRQ_MIPIDSI0 IRQ_SPI(82)
#define EXYNOS5_IRQ_WDT_IOP IRQ_SPI(83)
#define EXYNOS5_IRQ_ROTATOR IRQ_SPI(84)
#define EXYNOS5_IRQ_GSC0 IRQ_SPI(85)
#define EXYNOS5_IRQ_GSC1 IRQ_SPI(86)
@ -295,8 +296,8 @@
#define EXYNOS5_IRQ_JPEG IRQ_SPI(89)
#define EXYNOS5_IRQ_EFNFCON_DMA IRQ_SPI(90)
#define EXYNOS5_IRQ_2D IRQ_SPI(91)
#define EXYNOS5_IRQ_SFMC0 IRQ_SPI(92)
#define EXYNOS5_IRQ_SFMC1 IRQ_SPI(93)
#define EXYNOS5_IRQ_EFNFCON_0 IRQ_SPI(92)
#define EXYNOS5_IRQ_EFNFCON_1 IRQ_SPI(93)
#define EXYNOS5_IRQ_MIXER IRQ_SPI(94)
#define EXYNOS5_IRQ_HDMI IRQ_SPI(95)
#define EXYNOS5_IRQ_MFC IRQ_SPI(96)
@ -310,7 +311,7 @@
#define EXYNOS5_IRQ_PCM2 IRQ_SPI(104)
#define EXYNOS5_IRQ_SPDIF IRQ_SPI(105)
#define EXYNOS5_IRQ_ADC0 IRQ_SPI(106)
#define EXYNOS5_IRQ_ADC1 IRQ_SPI(107)
#define EXYNOS5_IRQ_SATA_PHY IRQ_SPI(108)
#define EXYNOS5_IRQ_SATA_PMEMREQ IRQ_SPI(109)
#define EXYNOS5_IRQ_CAM_C IRQ_SPI(110)
@ -319,8 +320,9 @@
#define EXYNOS5_IRQ_DP1_INTP1 IRQ_SPI(113)
#define EXYNOS5_IRQ_CEC IRQ_SPI(114)
#define EXYNOS5_IRQ_SATA IRQ_SPI(115)
#define EXYNOS5_IRQ_NFCON IRQ_SPI(116)
#define EXYNOS5_IRQ_MCT_L0 IRQ_SPI(120)
#define EXYNOS5_IRQ_MCT_L1 IRQ_SPI(121)
#define EXYNOS5_IRQ_MMC44 IRQ_SPI(123)
#define EXYNOS5_IRQ_MDMA1 IRQ_SPI(124)
#define EXYNOS5_IRQ_FIMC_LITE0 IRQ_SPI(125)
@ -328,7 +330,6 @@
#define EXYNOS5_IRQ_RP_TIMER IRQ_SPI(127)
#define EXYNOS5_IRQ_PMU COMBINER_IRQ(1, 2)
#define EXYNOS5_IRQ_PMU_CPU1 COMBINER_IRQ(1, 6)
#define EXYNOS5_IRQ_SYSMMU_GSC0_0 COMBINER_IRQ(2, 0)
#define EXYNOS5_IRQ_SYSMMU_GSC0_1 COMBINER_IRQ(2, 1)
@ -339,6 +340,8 @@
#define EXYNOS5_IRQ_SYSMMU_GSC3_0 COMBINER_IRQ(2, 6)
#define EXYNOS5_IRQ_SYSMMU_GSC3_1 COMBINER_IRQ(2, 7)
#define EXYNOS5_IRQ_SYSMMU_LITE2_0 COMBINER_IRQ(3, 0)
#define EXYNOS5_IRQ_SYSMMU_LITE2_1 COMBINER_IRQ(3, 1)
#define EXYNOS5_IRQ_SYSMMU_FIMD1_0 COMBINER_IRQ(3, 2)
#define EXYNOS5_IRQ_SYSMMU_FIMD1_1 COMBINER_IRQ(3, 3)
#define EXYNOS5_IRQ_SYSMMU_LITE0_0 COMBINER_IRQ(3, 4)
@ -362,8 +365,8 @@
#define EXYNOS5_IRQ_SYSMMU_ARM_0 COMBINER_IRQ(6, 0)
#define EXYNOS5_IRQ_SYSMMU_ARM_1 COMBINER_IRQ(6, 1)
#define EXYNOS5_IRQ_SYSMMU_MFC_L_0 COMBINER_IRQ(6, 2)
#define EXYNOS5_IRQ_SYSMMU_MFC_L_1 COMBINER_IRQ(6, 3)
#define EXYNOS5_IRQ_SYSMMU_MFC_R_0 COMBINER_IRQ(6, 2)
#define EXYNOS5_IRQ_SYSMMU_MFC_R_1 COMBINER_IRQ(6, 3)
#define EXYNOS5_IRQ_SYSMMU_RTIC_0 COMBINER_IRQ(6, 4)
#define EXYNOS5_IRQ_SYSMMU_RTIC_1 COMBINER_IRQ(6, 5)
#define EXYNOS5_IRQ_SYSMMU_SSS_0 COMBINER_IRQ(6, 6)
@ -375,11 +378,9 @@
#define EXYNOS5_IRQ_SYSMMU_MDMA1_1 COMBINER_IRQ(7, 3)
#define EXYNOS5_IRQ_SYSMMU_TV_0 COMBINER_IRQ(7, 4)
#define EXYNOS5_IRQ_SYSMMU_TV_1 COMBINER_IRQ(7, 5)
#define EXYNOS5_IRQ_SYSMMU_GPSX_0 COMBINER_IRQ(7, 6)
#define EXYNOS5_IRQ_SYSMMU_GPSX_1 COMBINER_IRQ(7, 7)
#define EXYNOS5_IRQ_SYSMMU_MFC_R_0 COMBINER_IRQ(8, 5)
#define EXYNOS5_IRQ_SYSMMU_MFC_R_1 COMBINER_IRQ(8, 6)
#define EXYNOS5_IRQ_SYSMMU_MFC_L_0 COMBINER_IRQ(8, 5)
#define EXYNOS5_IRQ_SYSMMU_MFC_L_1 COMBINER_IRQ(8, 6)
#define EXYNOS5_IRQ_SYSMMU_DIS1_0 COMBINER_IRQ(9, 4)
#define EXYNOS5_IRQ_SYSMMU_DIS1_1 COMBINER_IRQ(9, 5)
@ -395,17 +396,24 @@
#define EXYNOS5_IRQ_SYSMMU_DRC_0 COMBINER_IRQ(11, 6)
#define EXYNOS5_IRQ_SYSMMU_DRC_1 COMBINER_IRQ(11, 7)
#define EXYNOS5_IRQ_MDMA1_ABORT COMBINER_IRQ(13, 1)
#define EXYNOS5_IRQ_MDMA0_ABORT COMBINER_IRQ(15, 3)
#define EXYNOS5_IRQ_FIMD1_FIFO COMBINER_IRQ(18, 4)
#define EXYNOS5_IRQ_FIMD1_VSYNC COMBINER_IRQ(18, 5)
#define EXYNOS5_IRQ_FIMD1_SYSTEM COMBINER_IRQ(18, 6)
#define EXYNOS5_IRQ_ARMIOP_GIC COMBINER_IRQ(19, 0)
#define EXYNOS5_IRQ_ARMISP_GIC COMBINER_IRQ(19, 1)
#define EXYNOS5_IRQ_IOP_GIC COMBINER_IRQ(19, 3)
#define EXYNOS5_IRQ_ISP_GIC COMBINER_IRQ(19, 4)
#define EXYNOS5_IRQ_PMU_CPU1 COMBINER_IRQ(22, 4)
#define EXYNOS5_IRQ_EINT0 COMBINER_IRQ(23, 0)
#define EXYNOS5_IRQ_MCT_L0 COMBINER_IRQ(23, 1)
#define EXYNOS5_IRQ_MCT_L1 COMBINER_IRQ(23, 2)
#define EXYNOS5_IRQ_MCT_G0 COMBINER_IRQ(23, 3)
#define EXYNOS5_IRQ_MCT_G1 COMBINER_IRQ(23, 4)
#define EXYNOS5_IRQ_MCT_G2 COMBINER_IRQ(23, 5)
#define EXYNOS5_IRQ_MCT_G3 COMBINER_IRQ(23, 6)
#define EXYNOS5_IRQ_EINT1 COMBINER_IRQ(24, 0)
#define EXYNOS5_IRQ_SYSMMU_LITE1_0 COMBINER_IRQ(24, 1)
@ -436,7 +444,7 @@
#define EXYNOS5_MAX_COMBINER_NR 32
#define EXYNOS5_IRQ_GPIO1_NR_GROUPS 13
#define EXYNOS5_IRQ_GPIO1_NR_GROUPS 14
#define EXYNOS5_IRQ_GPIO2_NR_GROUPS 9
#define EXYNOS5_IRQ_GPIO3_NR_GROUPS 5
#define EXYNOS5_IRQ_GPIO4_NR_GROUPS 1

7
arch/arm/mach-exynos/include/mach/map.h
View File

@ -34,6 +34,9 @@
#define EXYNOS4_PA_JPEG 0x11840000
/* x = 0...1 */
#define EXYNOS4_PA_FIMC_LITE(x) (0x12390000 + ((x) * 0x10000))
#define EXYNOS4_PA_G2D 0x12800000
#define EXYNOS4_PA_I2S0 0x03830000
@ -78,8 +81,8 @@
#define EXYNOS4_PA_GIC_CPU 0x10480000
#define EXYNOS4_PA_GIC_DIST 0x10490000
#define EXYNOS5_PA_GIC_CPU 0x10480000
#define EXYNOS5_PA_GIC_DIST 0x10490000
#define EXYNOS5_PA_GIC_CPU 0x10482000
#define EXYNOS5_PA_GIC_DIST 0x10481000
#define EXYNOS4_PA_COREPERI 0x10500000
#define EXYNOS4_PA_TWD 0x10500600

2
arch/arm/mach-exynos/include/mach/regs-clock.h
View File

@ -322,6 +322,8 @@
#define EXYNOS5_CLKSRC_CDREX EXYNOS_CLKREG(0x20200)
#define EXYNOS5_CLKDIV_CDREX EXYNOS_CLKREG(0x20500)
#define EXYNOS5_PLL_DIV2_SEL EXYNOS_CLKREG(0x20A24)
#define EXYNOS5_EPLL_LOCK EXYNOS_CLKREG(0x10030)
#define EXYNOS5_EPLLCON0_LOCKED_SHIFT (29)

10
arch/arm/mach-exynos/include/mach/regs-pmu.h
View File

@ -180,7 +180,7 @@
#define S5P_PMU_LCD1_CONF S5P_PMUREG(0x3CA0)
/* Only for EXYNOS4212 */
/* Only for EXYNOS4x12 */
#define S5P_ISP_ARM_LOWPWR S5P_PMUREG(0x1050)
#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR S5P_PMUREG(0x1054)
#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR S5P_PMUREG(0x1058)
@ -221,4 +221,12 @@
#define S5P_SECSS_MEM_OPTION S5P_PMUREG(0x2EC8)
#define S5P_ROTATOR_MEM_OPTION S5P_PMUREG(0x2F48)
/* Only for EXYNOS4412 */
#define S5P_ARM_CORE2_LOWPWR S5P_PMUREG(0x1020)
#define S5P_DIS_IRQ_CORE2 S5P_PMUREG(0x1024)
#define S5P_DIS_IRQ_CENTRAL2 S5P_PMUREG(0x1028)
#define S5P_ARM_CORE3_LOWPWR S5P_PMUREG(0x1030)
#define S5P_DIS_IRQ_CORE3 S5P_PMUREG(0x1034)
#define S5P_DIS_IRQ_CENTRAL3 S5P_PMUREG(0x1038)
#endif /* __ASM_ARCH_REGS_PMU_H */

2
arch/arm/mach-exynos/include/mach/spi-clocks.h
View File

@ -11,6 +11,6 @@
#define __ASM_ARCH_SPI_CLKS_H __FILE__
/* Must source from SCLK_SPI */
#define EXYNOS4_SPI_SRCCLK_SCLK 0
#define EXYNOS_SPI_SRCCLK_SCLK 0
#endif /* __ASM_ARCH_SPI_CLKS_H */

4
arch/arm/mach-exynos/mach-exynos5-dt.c
View File

@ -43,6 +43,10 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
"exynos4210-uart.2", NULL),
OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART3,
"exynos4210-uart.3", NULL),
OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(0),
"s3c2440-i2c.0", NULL),
OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1),
"s3c2440-i2c.1", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),

17
arch/arm/mach-exynos/mct.c
View File

@ -388,6 +388,7 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
{
struct mct_clock_event_device *mevt;
unsigned int cpu = smp_processor_id();
int mct_lx_irq;
mevt = this_cpu_ptr(&percpu_mct_tick);
mevt->evt = evt;
@ -414,14 +415,18 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
if (mct_int_type == MCT_INT_SPI) {
if (cpu == 0) {
mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L0 :
EXYNOS5_IRQ_MCT_L0;
mct_tick0_event_irq.dev_id = mevt;
evt->irq = EXYNOS4_IRQ_MCT_L0;
setup_irq(EXYNOS4_IRQ_MCT_L0, &mct_tick0_event_irq);
evt->irq = mct_lx_irq;
setup_irq(mct_lx_irq, &mct_tick0_event_irq);
} else {
mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L1 :
EXYNOS5_IRQ_MCT_L1;
mct_tick1_event_irq.dev_id = mevt;
evt->irq = EXYNOS4_IRQ_MCT_L1;
setup_irq(EXYNOS4_IRQ_MCT_L1, &mct_tick1_event_irq);
irq_set_affinity(EXYNOS4_IRQ_MCT_L1, cpumask_of(1));
evt->irq = mct_lx_irq;
setup_irq(mct_lx_irq, &mct_tick1_event_irq);
irq_set_affinity(mct_lx_irq, cpumask_of(1));
}
} else {
enable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, 0);
@ -473,7 +478,7 @@ static void __init exynos4_timer_resources(void)
static void __init exynos4_timer_init(void)
{
if (soc_is_exynos4210())
if ((soc_is_exynos4210()) || (soc_is_exynos5250()))
mct_int_type = MCT_INT_SPI;
else
mct_int_type = MCT_INT_PPI;

4
arch/arm/mach-exynos/pm.c
View File

@ -275,7 +275,7 @@ static void exynos4_restore_pll(void)
static struct subsys_interface exynos4_pm_interface = {
.name = "exynos4_pm",
.subsys = &exynos4_subsys,
.subsys = &exynos_subsys,
.add_dev = exynos4_pm_add,
};
@ -313,7 +313,7 @@ static int exynos4_pm_suspend(void)
tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
if (soc_is_exynos4212()) {
if (soc_is_exynos4212() || soc_is_exynos4412()) {
tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION);
tmp &= ~(S5P_USE_STANDBYWFI_ISP_ARM |
S5P_USE_STANDBYWFE_ISP_ARM);

24
arch/arm/mach-exynos/pmu.c
View File

@ -94,7 +94,7 @@ static struct exynos4_pmu_conf exynos4210_pmu_config[] = {
{ PMU_TABLE_END,},
};
static struct exynos4_pmu_conf exynos4212_pmu_config[] = {
static struct exynos4_pmu_conf exynos4x12_pmu_config[] = {
{ S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } },
{ S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } },
{ S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } },
@ -202,6 +202,16 @@ static struct exynos4_pmu_conf exynos4212_pmu_config[] = {
{ PMU_TABLE_END,},
};
static struct exynos4_pmu_conf exynos4412_pmu_config[] = {
{ S5P_ARM_CORE2_LOWPWR, { 0x0, 0x0, 0x2 } },
{ S5P_DIS_IRQ_CORE2, { 0x0, 0x0, 0x0 } },
{ S5P_DIS_IRQ_CENTRAL2, { 0x0, 0x0, 0x0 } },
{ S5P_ARM_CORE3_LOWPWR, { 0x0, 0x0, 0x2 } },
{ S5P_DIS_IRQ_CORE3, { 0x0, 0x0, 0x0 } },
{ S5P_DIS_IRQ_CENTRAL3, { 0x0, 0x0, 0x0 } },
{ PMU_TABLE_END,},
};
void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
{
unsigned int i;
@ -209,6 +219,12 @@ void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
for (i = 0; (exynos4_pmu_config[i].reg != PMU_TABLE_END) ; i++)
__raw_writel(exynos4_pmu_config[i].val[mode],
exynos4_pmu_config[i].reg);
if (soc_is_exynos4412()) {
for (i = 0; exynos4412_pmu_config[i].reg != PMU_TABLE_END ; i++)
__raw_writel(exynos4412_pmu_config[i].val[mode],
exynos4412_pmu_config[i].reg);
}
}
static int __init exynos4_pmu_init(void)
@ -218,9 +234,9 @@ static int __init exynos4_pmu_init(void)
if (soc_is_exynos4210()) {
exynos4_pmu_config = exynos4210_pmu_config;
pr_info("EXYNOS4210 PMU Initialize\n");
} else if (soc_is_exynos4212()) {
exynos4_pmu_config = exynos4212_pmu_config;
pr_info("EXYNOS4212 PMU Initialize\n");
} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
exynos4_pmu_config = exynos4x12_pmu_config;
pr_info("EXYNOS4x12 PMU Initialize\n");
} else {
pr_info("EXYNOS4: PMU not supported\n");
}

5
arch/arm/mach-s3c24xx/Kconfig
View File

@ -518,6 +518,11 @@ config S3C2443_DMA
help
Internal config node for S3C2443 DMA support
config S3C2443_SETUP_SPI
bool
help
Common setup code for SPI GPIO configurations
endif # CPU_S3C2443 || CPU_S3C2416
if CPU_S3C2443

1
arch/arm/mach-s3c24xx/Makefile
View File

@ -97,5 +97,6 @@ obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o
# device setup
obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
obj-$(CONFIG_S3C2443_SETUP_SPI) += setup-spi.o
obj-$(CONFIG_ARCH_S3C24XX) += setup-i2c.o
obj-$(CONFIG_S3C24XX_SETUP_TS) += setup-ts.o

1
arch/arm/mach-s3c24xx/clock-s3c2416.c
View File

@ -144,6 +144,7 @@ static struct clk_lookup s3c2416_clk_lookup[] = {
CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk),
CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk),
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &hsspi_mux.clk),
};
void __init s3c2416_init_clocks(int xtal)

6
arch/arm/mach-s3c24xx/clock-s3c2443.c
View File

@ -179,6 +179,11 @@ static struct clk *clks[] __initdata = {
&clk_hsmmc,
};
static struct clk_lookup s3c2443_clk_lookup[] = {
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_hsspi.clk),
};
void __init s3c2443_init_clocks(int xtal)
{
unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
@ -210,6 +215,7 @@ void __init s3c2443_init_clocks(int xtal)
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
s3c_pwmclk_init();
}

15
arch/arm/mach-s3c24xx/common-s3c2443.c
View File

@ -423,11 +423,6 @@ static struct clk init_clocks_off[] = {
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_IIS,
}, {
.name = "hsspi",
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_HSSPI,
}, {
.name = "adc",
.parent = &clk_p,
@ -562,6 +557,14 @@ static struct clk hsmmc1_clk = {
.ctrlbit = S3C2443_HCLKCON_HSMMC,
};
static struct clk hsspi_clk = {
.name = "spi",
.devname = "s3c64xx-spi.0",
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_HSSPI,
};
/* EPLLCON compatible enough to get on/off information */
void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
@ -612,6 +615,7 @@ static struct clk *clks[] __initdata = {
&clk_usb_bus,
&clk_armdiv,
&hsmmc1_clk,
&hsspi_clk,
};
static struct clksrc_clk *clksrcs[] __initdata = {
@ -629,6 +633,7 @@ static struct clk_lookup s3c2443_clk_lookup[] = {
CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &hsspi_clk),
};
void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,

16
arch/arm/mach-s3c24xx/dma-s3c2443.c
View File

@ -55,12 +55,20 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = {
.name = "sdi",
.channels = MAP(S3C2443_DMAREQSEL_SDI),
},
[DMACH_SPI0] = {
.name = "spi0",
[DMACH_SPI0_RX] = {
.name = "spi0-rx",
.channels = MAP(S3C2443_DMAREQSEL_SPI0RX),
},
[DMACH_SPI0_TX] = {
.name = "spi0-tx",
.channels = MAP(S3C2443_DMAREQSEL_SPI0TX),
},
[DMACH_SPI1] = { /* only on S3C2443/S3C2450 */
.name = "spi1",
[DMACH_SPI1_RX] = { /* only on S3C2443/S3C2450 */
.name = "spi1-rx",
.channels = MAP(S3C2443_DMAREQSEL_SPI1RX),
},
[DMACH_SPI1_TX] = { /* only on S3C2443/S3C2450 */
.name = "spi1-tx",
.channels = MAP(S3C2443_DMAREQSEL_SPI1TX),
},
[DMACH_UART0] = {

4
arch/arm/mach-s3c24xx/include/mach/dma.h
View File

@ -47,6 +47,10 @@ enum dma_ch {
DMACH_UART2_SRC2,
DMACH_UART3, /* s3c2443 has extra uart */
DMACH_UART3_SRC2,
DMACH_SPI0_TX, /* s3c2443/2416/2450 hsspi0 */
DMACH_SPI0_RX, /* s3c2443/2416/2450 hsspi0 */
DMACH_SPI1_TX, /* s3c2443/2450 hsspi1 */
DMACH_SPI1_RX, /* s3c2443/2450 hsspi1 */
DMACH_MAX, /* the end entry */
};

5
arch/arm/mach-s3c24xx/include/mach/map.h
View File

@ -98,6 +98,8 @@
/* SPI */
#define S3C2410_PA_SPI (0x59000000)
#define S3C2443_PA_SPI0 (0x52000000)
#define S3C2443_PA_SPI1 S3C2410_PA_SPI
/* SDI */
#define S3C2410_PA_SDI (0x5A000000)
@ -162,4 +164,7 @@
#define S3C_PA_WDT S3C2410_PA_WATCHDOG
#define S3C_PA_NAND S3C24XX_PA_NAND
#define S3C_PA_SPI0 S3C2443_PA_SPI0
#define S3C_PA_SPI1 S3C2443_PA_SPI1
#endif /* __ASM_ARCH_MAP_H */

39
arch/arm/mach-s3c24xx/setup-spi.c Normal file
View File

@ -0,0 +1,39 @@
/*
* HS-SPI device setup for S3C2443/S3C2416
*
* Copyright (C) 2011 Samsung Electronics Ltd.
* http://www.samsung.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <plat/gpio-cfg.h>
#include <plat/s3c64xx-spi.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
#ifdef CONFIG_S3C64XX_DEV_SPI0
struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 13,
.tx_st_done = 21,
.high_speed = 1,
};
int s3c64xx_spi0_cfg_gpio(struct platform_device *pdev)
{
/* enable hsspi bit in misccr */
s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1);
s3c_gpio_cfgall_range(S3C2410_GPE(11), 3,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
return 0;
}
#endif

20
arch/arm/mach-spear13xx/Kconfig Normal file
View File

@ -0,0 +1,20 @@
#
# SPEAr13XX Machine configuration file
#
if ARCH_SPEAR13XX
menu "SPEAr13xx Implementations"
config MACH_SPEAR1310
bool "SPEAr1310 Machine support with Device Tree"
select PINCTRL_SPEAR1310
help
Supports ST SPEAr1310 machine configured via the device-tree
config MACH_SPEAR1340
bool "SPEAr1340 Machine support with Device Tree"
select PINCTRL_SPEAR1340
help
Supports ST SPEAr1340 machine configured via the device-tree
endmenu
endif #ARCH_SPEAR13XX

10
arch/arm/mach-spear13xx/Makefile Normal file
View File

@ -0,0 +1,10 @@
#
# Makefile for SPEAr13XX machine series
#
obj-$(CONFIG_SMP) += headsmp.o platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_ARCH_SPEAR13XX) += spear13xx.o
obj-$(CONFIG_MACH_SPEAR1310) += spear1310.o
obj-$(CONFIG_MACH_SPEAR1340) += spear1340.o

6
arch/arm/mach-spear13xx/Makefile.boot Normal file
View File

@ -0,0 +1,6 @@
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
dtb-$(CONFIG_MACH_SPEAR1310) += spear1310-evb.dtb
dtb-$(CONFIG_MACH_SPEAR1340) += spear1340-evb.dtb

47
arch/arm/mach-spear13xx/headsmp.S Normal file
View File

@ -0,0 +1,47 @@
/*
* arch/arm/mach-spear13XX/headsmp.S
*
* Picked from realview
* Copyright (c) 2012 ST Microelectronics Limited
* Shiraz Hashim <shiraz.hashim@st.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <linux/init.h>
__INIT
/*
* spear13xx specific entry point for secondary CPUs. This provides
* a "holding pen" into which all secondary cores are held until we're
* ready for them to initialise.
*/
ENTRY(spear13xx_secondary_startup)
mrc p15, 0, r0, c0, c0, 5
and r0, r0, #15
adr r4, 1f
ldmia r4, {r5, r6}
sub r4, r4, r5
add r6, r6, r4
pen: ldr r7, [r6]
cmp r7, r0
bne pen
/* re-enable coherency */
mrc p15, 0, r0, c1, c0, 1
orr r0, r0, #(1 << 6) | (1 << 0)
mcr p15, 0, r0, c1, c0, 1
/*
* we've been released from the holding pen: secondary_stack
* should now contain the SVC stack for this core
*/
b secondary_startup
.align
1: .long .
.long pen_release
ENDPROC(spear13xx_secondary_startup)

119
arch/arm/mach-spear13xx/hotplug.c Normal file
View File

@ -0,0 +1,119 @@
/*
* linux/arch/arm/mach-spear13xx/hotplug.c
*
* Copyright (C) 2012 ST Microelectronics Ltd.
* Deepak Sikri <deepak.sikri@st.com>
*
* based upon linux/arch/arm/mach-realview/hotplug.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/smp.h>
#include <asm/cacheflush.h>
#include <asm/cp15.h>
#include <asm/smp_plat.h>
extern volatile int pen_release;
static inline void cpu_enter_lowpower(void)
{
unsigned int v;
flush_cache_all();
asm volatile(
" mcr p15, 0, %1, c7, c5, 0\n"
" dsb\n"
/*
* Turn off coherency
*/
" mrc p15, 0, %0, c1, c0, 1\n"
" bic %0, %0, #0x20\n"
" mcr p15, 0, %0, c1, c0, 1\n"
" mrc p15, 0, %0, c1, c0, 0\n"
" bic %0, %0, %2\n"
" mcr p15, 0, %0, c1, c0, 0\n"
: "=&r" (v)
: "r" (0), "Ir" (CR_C)
: "cc", "memory");
}
static inline void cpu_leave_lowpower(void)
{
unsigned int v;
asm volatile("mrc p15, 0, %0, c1, c0, 0\n"
" orr %0, %0, %1\n"
" mcr p15, 0, %0, c1, c0, 0\n"
" mrc p15, 0, %0, c1, c0, 1\n"
" orr %0, %0, #0x20\n"
" mcr p15, 0, %0, c1, c0, 1\n"
: "=&r" (v)
: "Ir" (CR_C)
: "cc");
}
static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
{
for (;;) {
wfi();
if (pen_release == cpu) {
/*
* OK, proper wakeup, we're done
*/
break;
}
/*
* Getting here, means that we have come out of WFI without
* having been woken up - this shouldn't happen
*
* Just note it happening - when we're woken, we can report
* its occurrence.
*/
(*spurious)++;
}
}
int platform_cpu_kill(unsigned int cpu)
{
return 1;
}
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
void __cpuinit platform_cpu_die(unsigned int cpu)
{
int spurious = 0;
/*
* we're ready for shutdown now, so do it
*/
cpu_enter_lowpower();
platform_do_lowpower(cpu, &spurious);
/*
* bring this CPU back into the world of cache
* coherency, and then restore interrupts
*/
cpu_leave_lowpower();
if (spurious)
pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
}
int platform_cpu_disable(unsigned int cpu)
{
/*
* we don't allow CPU 0 to be shutdown (it is still too special
* e.g. clock tick interrupts)
*/
return cpu == 0 ? -EPERM : 0;
}

14
arch/arm/mach-spear13xx/include/mach/debug-macro.S Normal file
View File

@ -0,0 +1,14 @@
/*
* arch/arm/mach-spear13xx/include/mach/debug-macro.S
*
* Debugging macro include header spear13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
* Viresh Kumar <viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <plat/debug-macro.S>

128
arch/arm/mach-spear13xx/include/mach/dma.h Normal file
View File

@ -0,0 +1,128 @@
/*
* arch/arm/mach-spear13xx/include/mach/dma.h
*
* DMA information for SPEAr13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
* Viresh Kumar <viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __MACH_DMA_H
#define __MACH_DMA_H
/* request id of all the peripherals */
enum dma_master_info {
/* Accessible from only one master */
DMA_MASTER_MCIF = 0,
DMA_MASTER_FSMC = 1,
/* Accessible from both 0 & 1 */
DMA_MASTER_MEMORY = 0,
DMA_MASTER_ADC = 0,
DMA_MASTER_UART0 = 0,
DMA_MASTER_SSP0 = 0,
DMA_MASTER_I2C0 = 0,
#ifdef CONFIG_MACH_SPEAR1310
/* Accessible from only one master */
SPEAR1310_DMA_MASTER_JPEG = 1,
/* Accessible from both 0 & 1 */
SPEAR1310_DMA_MASTER_I2S = 0,
SPEAR1310_DMA_MASTER_UART1 = 0,
SPEAR1310_DMA_MASTER_UART2 = 0,
SPEAR1310_DMA_MASTER_UART3 = 0,
SPEAR1310_DMA_MASTER_UART4 = 0,
SPEAR1310_DMA_MASTER_UART5 = 0,
SPEAR1310_DMA_MASTER_I2C1 = 0,
SPEAR1310_DMA_MASTER_I2C2 = 0,
SPEAR1310_DMA_MASTER_I2C3 = 0,
SPEAR1310_DMA_MASTER_I2C4 = 0,
SPEAR1310_DMA_MASTER_I2C5 = 0,
SPEAR1310_DMA_MASTER_I2C6 = 0,
SPEAR1310_DMA_MASTER_I2C7 = 0,
SPEAR1310_DMA_MASTER_SSP1 = 0,
#endif
#ifdef CONFIG_MACH_SPEAR1340
/* Accessible from only one master */
SPEAR1340_DMA_MASTER_I2S_PLAY = 1,
SPEAR1340_DMA_MASTER_I2S_REC = 1,
SPEAR1340_DMA_MASTER_I2C1 = 1,
SPEAR1340_DMA_MASTER_UART1 = 1,
/* following are accessible from both master 0 & 1 */
SPEAR1340_DMA_MASTER_SPDIF = 0,
SPEAR1340_DMA_MASTER_CAM = 1,
SPEAR1340_DMA_MASTER_VIDEO_IN = 0,
SPEAR1340_DMA_MASTER_MALI = 0,
#endif
};
enum request_id {
DMA_REQ_ADC = 0,
DMA_REQ_SSP0_TX = 4,
DMA_REQ_SSP0_RX = 5,
DMA_REQ_UART0_TX = 6,
DMA_REQ_UART0_RX = 7,
DMA_REQ_I2C0_TX = 8,
DMA_REQ_I2C0_RX = 9,
#ifdef CONFIG_MACH_SPEAR1310
SPEAR1310_DMA_REQ_FROM_JPEG = 2,
SPEAR1310_DMA_REQ_TO_JPEG = 3,
SPEAR1310_DMA_REQ_I2S_TX = 10,
SPEAR1310_DMA_REQ_I2S_RX = 11,
SPEAR1310_DMA_REQ_I2C1_RX = 0,
SPEAR1310_DMA_REQ_I2C1_TX = 1,
SPEAR1310_DMA_REQ_I2C2_RX = 2,
SPEAR1310_DMA_REQ_I2C2_TX = 3,
SPEAR1310_DMA_REQ_I2C3_RX = 4,
SPEAR1310_DMA_REQ_I2C3_TX = 5,
SPEAR1310_DMA_REQ_I2C4_RX = 6,
SPEAR1310_DMA_REQ_I2C4_TX = 7,
SPEAR1310_DMA_REQ_I2C5_RX = 8,
SPEAR1310_DMA_REQ_I2C5_TX = 9,
SPEAR1310_DMA_REQ_I2C6_RX = 10,
SPEAR1310_DMA_REQ_I2C6_TX = 11,
SPEAR1310_DMA_REQ_UART1_RX = 12,
SPEAR1310_DMA_REQ_UART1_TX = 13,
SPEAR1310_DMA_REQ_UART2_RX = 14,
SPEAR1310_DMA_REQ_UART2_TX = 15,
SPEAR1310_DMA_REQ_UART5_RX = 16,
SPEAR1310_DMA_REQ_UART5_TX = 17,
SPEAR1310_DMA_REQ_SSP1_RX = 18,
SPEAR1310_DMA_REQ_SSP1_TX = 19,
SPEAR1310_DMA_REQ_I2C7_RX = 20,
SPEAR1310_DMA_REQ_I2C7_TX = 21,
SPEAR1310_DMA_REQ_UART3_RX = 28,
SPEAR1310_DMA_REQ_UART3_TX = 29,
SPEAR1310_DMA_REQ_UART4_RX = 30,
SPEAR1310_DMA_REQ_UART4_TX = 31,
#endif
#ifdef CONFIG_MACH_SPEAR1340
SPEAR1340_DMA_REQ_SPDIF_TX = 2,
SPEAR1340_DMA_REQ_SPDIF_RX = 3,
SPEAR1340_DMA_REQ_I2S_TX = 10,
SPEAR1340_DMA_REQ_I2S_RX = 11,
SPEAR1340_DMA_REQ_UART1_TX = 12,
SPEAR1340_DMA_REQ_UART1_RX = 13,
SPEAR1340_DMA_REQ_I2C1_TX = 14,
SPEAR1340_DMA_REQ_I2C1_RX = 15,
SPEAR1340_DMA_REQ_CAM0_EVEN = 0,
SPEAR1340_DMA_REQ_CAM0_ODD = 1,
SPEAR1340_DMA_REQ_CAM1_EVEN = 2,
SPEAR1340_DMA_REQ_CAM1_ODD = 3,
SPEAR1340_DMA_REQ_CAM2_EVEN = 4,
SPEAR1340_DMA_REQ_CAM2_ODD = 5,
SPEAR1340_DMA_REQ_CAM3_EVEN = 6,
SPEAR1340_DMA_REQ_CAM3_ODD = 7,
#endif
};
#endif /* __MACH_DMA_H */

49
arch/arm/mach-spear13xx/include/mach/generic.h Normal file
View File

@ -0,0 +1,49 @@
/*
* arch/arm/mach-spear13xx/include/mach/generic.h
*
* spear13xx machine family generic header file
*
* Copyright (C) 2012 ST Microelectronics
* Viresh Kumar <viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __MACH_GENERIC_H
#define __MACH_GENERIC_H
#include <linux/dmaengine.h>
#include <asm/mach/time.h>
/* Add spear13xx structure declarations here */
extern struct sys_timer spear13xx_timer;
extern struct pl022_ssp_controller pl022_plat_data;
extern struct dw_dma_platform_data dmac_plat_data;
extern struct dw_dma_slave cf_dma_priv;
extern struct dw_dma_slave nand_read_dma_priv;
extern struct dw_dma_slave nand_write_dma_priv;
/* Add spear13xx family function declarations here */
void __init spear_setup_of_timer(void);
void __init spear13xx_map_io(void);
void __init spear13xx_dt_init_irq(void);
void __init spear13xx_l2x0_init(void);
bool dw_dma_filter(struct dma_chan *chan, void *slave);
void spear_restart(char, const char *);
void spear13xx_secondary_startup(void);
#ifdef CONFIG_MACH_SPEAR1310
void __init spear1310_clk_init(void);
#else
static inline void spear1310_clk_init(void) {}
#endif
#ifdef CONFIG_MACH_SPEAR1340
void __init spear1340_clk_init(void);
#else
static inline void spear1340_clk_init(void) {}
#endif
#endif /* __MACH_GENERIC_H */

19
arch/arm/mach-spear13xx/include/mach/gpio.h Normal file
View File

@ -0,0 +1,19 @@
/*
* arch/arm/mach-spear13xx/include/mach/gpio.h
*
* GPIO macros for SPEAr13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
* Viresh Kumar <viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __MACH_GPIO_H
#define __MACH_GPIO_H
#include <plat/gpio.h>
#endif /* __MACH_GPIO_H */

1
arch/arm/mach-spear13xx/include/mach/hardware.h Normal file
View File

@ -0,0 +1 @@
/* empty */

20
arch/arm/mach-spear13xx/include/mach/irqs.h Normal file
View File

@ -0,0 +1,20 @@
/*
* arch/arm/mach-spear13xx/include/mach/irqs.h
*
* IRQ helper macros for spear13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
* Viresh Kumar <viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __MACH_IRQS_H
#define __MACH_IRQS_H
#define IRQ_GIC_END 160
#define NR_IRQS IRQ_GIC_END
#endif /* __MACH_IRQS_H */

62
arch/arm/mach-spear13xx/include/mach/spear.h Normal file
View File

@ -0,0 +1,62 @@
/*
* arch/arm/mach-spear13xx/include/mach/spear.h
*
* spear13xx Machine family specific definition
*
* Copyright (C) 2012 ST Microelectronics
* Viresh Kumar <viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __MACH_SPEAR13XX_H
#define __MACH_SPEAR13XX_H
#include <asm/memory.h>
#define PERIP_GRP2_BASE UL(0xB3000000)
#define VA_PERIP_GRP2_BASE UL(0xFE000000)
#define MCIF_SDHCI_BASE UL(0xB3000000)
#define SYSRAM0_BASE UL(0xB3800000)
#define VA_SYSRAM0_BASE UL(0xFE800000)
#define SYS_LOCATION (VA_SYSRAM0_BASE + 0x600)
#define PERIP_GRP1_BASE UL(0xE0000000)
#define VA_PERIP_GRP1_BASE UL(0xFD000000)
#define UART_BASE UL(0xE0000000)
#define VA_UART_BASE UL(0xFD000000)
#define SSP_BASE UL(0xE0100000)
#define MISC_BASE UL(0xE0700000)
#define VA_MISC_BASE IOMEM(UL(0xFD700000))
#define A9SM_AND_MPMC_BASE UL(0xEC000000)
#define VA_A9SM_AND_MPMC_BASE UL(0xFC000000)
/* A9SM peripheral offsets */
#define A9SM_PERIP_BASE UL(0xEC800000)
#define VA_A9SM_PERIP_BASE UL(0xFC800000)
#define VA_SCU_BASE (VA_A9SM_PERIP_BASE + 0x00)
#define L2CC_BASE UL(0xED000000)
#define VA_L2CC_BASE IOMEM(UL(0xFB000000))
/* others */
#define DMAC0_BASE UL(0xEA800000)
#define DMAC1_BASE UL(0xEB000000)
#define MCIF_CF_BASE UL(0xB2800000)
/* Devices present in SPEAr1310 */
#ifdef CONFIG_MACH_SPEAR1310
#define SPEAR1310_RAS_GRP1_BASE UL(0xD8000000)
#define VA_SPEAR1310_RAS_GRP1_BASE UL(0xFA000000)
#define SPEAR1310_RAS_BASE UL(0xD8400000)
#define VA_SPEAR1310_RAS_BASE IOMEM(UL(0xFA400000))
#endif /* CONFIG_MACH_SPEAR1310 */
/* Debug uart for linux, will be used for debug and uncompress messages */
#define SPEAR_DBG_UART_BASE UART_BASE
#define VA_SPEAR_DBG_UART_BASE VA_UART_BASE
#endif /* __MACH_SPEAR13XX_H */

0
arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h Normal file
View File

0
arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h Normal file
View File

19
arch/arm/mach-spear13xx/include/mach/timex.h Normal file
View File

@ -0,0 +1,19 @@
/*
* arch/arm/mach-spear3xx/include/mach/timex.h
*
* SPEAr3XX machine family specific timex definitions
*
* Copyright (C) 2012 ST Microelectronics
* Viresh Kumar <viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __MACH_TIMEX_H
#define __MACH_TIMEX_H
#include <plat/timex.h>
#endif /* __MACH_TIMEX_H */

19
arch/arm/mach-spear13xx/include/mach/uncompress.h Normal file
View File

@ -0,0 +1,19 @@
/*
* arch/arm/mach-spear13xx/include/mach/uncompress.h
*
* Serial port stubs for kernel decompress status messages
*
* Copyright (C) 2012 ST Microelectronics
* Viresh Kumar <viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __MACH_UNCOMPRESS_H
#define __MACH_UNCOMPRESS_H
#include <plat/uncompress.h>
#endif /* __MACH_UNCOMPRESS_H */

127
arch/arm/mach-spear13xx/platsmp.c Normal file
View File

@ -0,0 +1,127 @@
/*
* arch/arm/mach-spear13xx/platsmp.c
*
* based upon linux/arch/arm/mach-realview/platsmp.c
*
* Copyright (C) 2012 ST Microelectronics Ltd.
* Shiraz Hashim <shiraz.hashim@st.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <linux/io.h>
#include <linux/smp.h>
#include <asm/cacheflush.h>
#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <mach/spear.h>
/*
* control for which core is the next to come out of the secondary
* boot "holding pen"
*/
volatile int __cpuinitdata pen_release = -1;
static DEFINE_SPINLOCK(boot_lock);
static void __iomem *scu_base = IOMEM(VA_SCU_BASE);
extern void spear13xx_secondary_startup(void);
void __cpuinit platform_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
*/
gic_secondary_init(0);
/*
* let the primary processor know we're out of the
* pen, then head off into the C entry point
*/
pen_release = -1;
smp_wmb();
/*
* Synchronise with the boot thread.
*/
spin_lock(&boot_lock);
spin_unlock(&boot_lock);
}
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
/*
* set synchronisation state between this boot processor
* and the secondary one
*/
spin_lock(&boot_lock);
/*
* The secondary processor is waiting to be released from
* the holding pen - release it, then wait for it to flag
* that it has been released by resetting pen_release.
*
* Note that "pen_release" is the hardware CPU ID, whereas
* "cpu" is Linux's internal ID.
*/
pen_release = cpu;
flush_cache_all();
outer_flush_all();
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
smp_rmb();
if (pen_release == -1)
break;
udelay(10);
}
/*
* now the secondary core is starting up let it run its
* calibrations, then wait for it to finish
*/
spin_unlock(&boot_lock);
return pen_release != -1 ? -ENOSYS : 0;
}
/*
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
void __init smp_init_cpus(void)
{
unsigned int i, ncores = scu_get_core_count(scu_base);
if (ncores > nr_cpu_ids) {
pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
ncores, nr_cpu_ids);
ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
{
scu_enable(scu_base);
/*
* Write the address of secondary startup into the system-wide location
* (presently it is in SRAM). The BootMonitor waits until it receives a
* soft interrupt, and then the secondary CPU branches to this address.
*/
__raw_writel(virt_to_phys(spear13xx_secondary_startup), SYS_LOCATION);
}

88
arch/arm/mach-spear13xx/spear1310.c Normal file
View File

@ -0,0 +1,88 @@
/*
* arch/arm/mach-spear13xx/spear1310.c
*
* SPEAr1310 machine source file
*
* Copyright (C) 2012 ST Microelectronics
* Viresh Kumar <viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#define pr_fmt(fmt) "SPEAr1310: " fmt
#include <linux/amba/pl022.h>
#include <linux/of_platform.h>
#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/generic.h>
#include <mach/spear.h>
/* Base addresses */
#define SPEAR1310_SSP1_BASE UL(0x5D400000)
#define SPEAR1310_SATA0_BASE UL(0xB1000000)
#define SPEAR1310_SATA1_BASE UL(0xB1800000)
#define SPEAR1310_SATA2_BASE UL(0xB4000000)
/* ssp device registration */
static struct pl022_ssp_controller ssp1_plat_data = {
.bus_id = 0,
.enable_dma = 0,
.num_chipselect = 3,
};
/* Add SPEAr1310 auxdata to pass platform data */
static struct of_dev_auxdata spear1310_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv),
OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
OF_DEV_AUXDATA("arm,pl022", SPEAR1310_SSP1_BASE, NULL, &ssp1_plat_data),
{}
};
static void __init spear1310_dt_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table,
spear1310_auxdata_lookup, NULL);
}
static const char * const spear1310_dt_board_compat[] = {
"st,spear1310",
"st,spear1310-evb",
NULL,
};
/*
* Following will create 16MB static virtual/physical mappings
* PHYSICAL VIRTUAL
* 0xD8000000 0xFA000000
*/
struct map_desc spear1310_io_desc[] __initdata = {
{
.virtual = VA_SPEAR1310_RAS_GRP1_BASE,
.pfn = __phys_to_pfn(SPEAR1310_RAS_GRP1_BASE),
.length = SZ_16M,
.type = MT_DEVICE
},
};
static void __init spear1310_map_io(void)
{
iotable_init(spear1310_io_desc, ARRAY_SIZE(spear1310_io_desc));
spear13xx_map_io();
}
DT_MACHINE_START(SPEAR1310_DT, "ST SPEAr1310 SoC with Flattened Device Tree")
.map_io = spear1310_map_io,
.init_irq = spear13xx_dt_init_irq,
.handle_irq = gic_handle_irq,
.timer = &spear13xx_timer,
.init_machine = spear1310_dt_init,
.restart = spear_restart,
.dt_compat = spear1310_dt_board_compat,
MACHINE_END

192
arch/arm/mach-spear13xx/spear1340.c Normal file
View File

@ -0,0 +1,192 @@
/*
* arch/arm/mach-spear13xx/spear1340.c
*
* SPEAr1340 machine source file
*
* Copyright (C) 2012 ST Microelectronics
* Viresh Kumar <viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#define pr_fmt(fmt) "SPEAr1340: " fmt
#include <linux/ahci_platform.h>
#include <linux/amba/serial.h>
#include <linux/delay.h>
#include <linux/dw_dmac.h>
#include <linux/of_platform.h>
#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
#include <mach/dma.h>
#include <mach/generic.h>
#include <mach/spear.h>
/* Base addresses */
#define SPEAR1340_SATA_BASE UL(0xB1000000)
#define SPEAR1340_UART1_BASE UL(0xB4100000)
/* Power Management Registers */
#define SPEAR1340_PCM_CFG (VA_MISC_BASE + 0x100)
#define SPEAR1340_PCM_WKUP_CFG (VA_MISC_BASE + 0x104)
#define SPEAR1340_SWITCH_CTR (VA_MISC_BASE + 0x108)
#define SPEAR1340_PERIP1_SW_RST (VA_MISC_BASE + 0x318)
#define SPEAR1340_PERIP2_SW_RST (VA_MISC_BASE + 0x31C)
#define SPEAR1340_PERIP3_SW_RST (VA_MISC_BASE + 0x320)
/* PCIE - SATA configuration registers */
#define SPEAR1340_PCIE_SATA_CFG (VA_MISC_BASE + 0x424)
/* PCIE CFG MASks */
#define SPEAR1340_PCIE_CFG_DEVICE_PRESENT (1 << 11)
#define SPEAR1340_PCIE_CFG_POWERUP_RESET (1 << 10)
#define SPEAR1340_PCIE_CFG_CORE_CLK_EN (1 << 9)
#define SPEAR1340_PCIE_CFG_AUX_CLK_EN (1 << 8)
#define SPEAR1340_SATA_CFG_TX_CLK_EN (1 << 4)
#define SPEAR1340_SATA_CFG_RX_CLK_EN (1 << 3)
#define SPEAR1340_SATA_CFG_POWERUP_RESET (1 << 2)
#define SPEAR1340_SATA_CFG_PM_CLK_EN (1 << 1)
#define SPEAR1340_PCIE_SATA_SEL_PCIE (0)
#define SPEAR1340_PCIE_SATA_SEL_SATA (1)
#define SPEAR1340_SATA_PCIE_CFG_MASK 0xF1F
#define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \
SPEAR1340_PCIE_CFG_AUX_CLK_EN | \
SPEAR1340_PCIE_CFG_CORE_CLK_EN | \
SPEAR1340_PCIE_CFG_POWERUP_RESET | \
SPEAR1340_PCIE_CFG_DEVICE_PRESENT)
#define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \
SPEAR1340_SATA_CFG_PM_CLK_EN | \
SPEAR1340_SATA_CFG_POWERUP_RESET | \
SPEAR1340_SATA_CFG_RX_CLK_EN | \
SPEAR1340_SATA_CFG_TX_CLK_EN)
#define SPEAR1340_PCIE_MIPHY_CFG (VA_MISC_BASE + 0x428)
#define SPEAR1340_MIPHY_OSC_BYPASS_EXT (1 << 31)
#define SPEAR1340_MIPHY_CLK_REF_DIV2 (1 << 27)
#define SPEAR1340_MIPHY_CLK_REF_DIV4 (2 << 27)
#define SPEAR1340_MIPHY_CLK_REF_DIV8 (3 << 27)
#define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0)
#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \
(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
SPEAR1340_MIPHY_CLK_REF_DIV2 | \
SPEAR1340_MIPHY_PLL_RATIO_TOP(60))
#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
(SPEAR1340_MIPHY_PLL_RATIO_TOP(120))
#define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
static struct dw_dma_slave uart1_dma_param[] = {
{
/* Tx */
.cfg_hi = DWC_CFGH_DST_PER(SPEAR1340_DMA_REQ_UART1_TX),
.cfg_lo = 0,
.src_master = DMA_MASTER_MEMORY,
.dst_master = SPEAR1340_DMA_MASTER_UART1,
}, {
/* Rx */
.cfg_hi = DWC_CFGH_SRC_PER(SPEAR1340_DMA_REQ_UART1_RX),
.cfg_lo = 0,
.src_master = SPEAR1340_DMA_MASTER_UART1,
.dst_master = DMA_MASTER_MEMORY,
}
};
static struct amba_pl011_data uart1_data = {
.dma_filter = dw_dma_filter,
.dma_tx_param = &uart1_dma_param[0],
.dma_rx_param = &uart1_dma_param[1],
};
/* SATA device registration */
static int sata_miphy_init(struct device *dev, void __iomem *addr)
{
writel(SPEAR1340_SATA_CFG_VAL, SPEAR1340_PCIE_SATA_CFG);
writel(SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK,
SPEAR1340_PCIE_MIPHY_CFG);
/* Switch on sata power domain */
writel((readl(SPEAR1340_PCM_CFG) | (0x800)), SPEAR1340_PCM_CFG);
msleep(20);
/* Disable PCIE SATA Controller reset */
writel((readl(SPEAR1340_PERIP1_SW_RST) & (~0x1000)),
SPEAR1340_PERIP1_SW_RST);
msleep(20);
return 0;
}
void sata_miphy_exit(struct device *dev)
{
writel(0, SPEAR1340_PCIE_SATA_CFG);
writel(0, SPEAR1340_PCIE_MIPHY_CFG);
/* Enable PCIE SATA Controller reset */
writel((readl(SPEAR1340_PERIP1_SW_RST) | (0x1000)),
SPEAR1340_PERIP1_SW_RST);
msleep(20);
/* Switch off sata power domain */
writel((readl(SPEAR1340_PCM_CFG) & (~0x800)), SPEAR1340_PCM_CFG);
msleep(20);
}
int sata_suspend(struct device *dev)
{
if (dev->power.power_state.event == PM_EVENT_FREEZE)
return 0;
sata_miphy_exit(dev);
return 0;
}
int sata_resume(struct device *dev)
{
if (dev->power.power_state.event == PM_EVENT_THAW)
return 0;
return sata_miphy_init(dev, NULL);
}
static struct ahci_platform_data sata_pdata = {
.init = sata_miphy_init,
.exit = sata_miphy_exit,
.suspend = sata_suspend,
.resume = sata_resume,
};
/* Add SPEAr1340 auxdata to pass platform data */
static struct of_dev_auxdata spear1340_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv),
OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
OF_DEV_AUXDATA("snps,spear-ahci", SPEAR1340_SATA_BASE, NULL,
&sata_pdata),
OF_DEV_AUXDATA("arm,pl011", SPEAR1340_UART1_BASE, NULL, &uart1_data),
{}
};
static void __init spear1340_dt_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table,
spear1340_auxdata_lookup, NULL);
}
static const char * const spear1340_dt_board_compat[] = {
"st,spear1340",
"st,spear1340-evb",
NULL,
};
DT_MACHINE_START(SPEAR1340_DT, "ST SPEAr1340 SoC with Flattened Device Tree")
.map_io = spear13xx_map_io,
.init_irq = spear13xx_dt_init_irq,
.handle_irq = gic_handle_irq,
.timer = &spear13xx_timer,
.init_machine = spear1340_dt_init,
.restart = spear_restart,
.dt_compat = spear1340_dt_board_compat,
MACHINE_END

197
arch/arm/mach-spear13xx/spear13xx.c Normal file
View File

@ -0,0 +1,197 @@
/*
* arch/arm/mach-spear13xx/spear13xx.c
*
* SPEAr13XX machines common source file
*
* Copyright (C) 2012 ST Microelectronics
* Viresh Kumar <viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#define pr_fmt(fmt) "SPEAr13xx: " fmt
#include <linux/amba/pl022.h>
#include <linux/clk.h>
#include <linux/dw_dmac.h>
#include <linux/err.h>
#include <linux/of_irq.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
#include <asm/smp_twd.h>
#include <mach/dma.h>
#include <mach/generic.h>
#include <mach/spear.h>
/* common dw_dma filter routine to be used by peripherals */
bool dw_dma_filter(struct dma_chan *chan, void *slave)
{
struct dw_dma_slave *dws = (struct dw_dma_slave *)slave;
if (chan->device->dev == dws->dma_dev) {
chan->private = slave;
return true;
} else {
return false;
}
}
/* ssp device registration */
static struct dw_dma_slave ssp_dma_param[] = {
{
/* Tx */
.cfg_hi = DWC_CFGH_DST_PER(DMA_REQ_SSP0_TX),
.cfg_lo = 0,
.src_master = DMA_MASTER_MEMORY,
.dst_master = DMA_MASTER_SSP0,
}, {
/* Rx */
.cfg_hi = DWC_CFGH_SRC_PER(DMA_REQ_SSP0_RX),
.cfg_lo = 0,
.src_master = DMA_MASTER_SSP0,
.dst_master = DMA_MASTER_MEMORY,
}
};
struct pl022_ssp_controller pl022_plat_data = {
.bus_id = 0,
.enable_dma = 1,
.dma_filter = dw_dma_filter,
.dma_rx_param = &ssp_dma_param[1],
.dma_tx_param = &ssp_dma_param[0],
.num_chipselect = 3,
};
/* CF device registration */
struct dw_dma_slave cf_dma_priv = {
.cfg_hi = 0,
.cfg_lo = 0,
.src_master = 0,
.dst_master = 0,
};
/* dmac device registeration */
struct dw_dma_platform_data dmac_plat_data = {
.nr_channels = 8,
.chan_allocation_order = CHAN_ALLOCATION_DESCENDING,
.chan_priority = CHAN_PRIORITY_DESCENDING,
};
void __init spear13xx_l2x0_init(void)
{
/*
* 512KB (64KB/way), 8-way associativity, parity supported
*
* FIXME: 9th bit, of Auxillary Controller register must be set
* for some spear13xx devices for stable L2 operation.
*
* Enable Early BRESP, L2 prefetch for Instruction and Data,
* write alloc and 'Full line of zero' options
*
*/
writel_relaxed(0x06, VA_L2CC_BASE + L2X0_PREFETCH_CTRL);
/*
* Program following latencies in order to make
* SPEAr1340 work at 600 MHz
*/
writel_relaxed(0x221, VA_L2CC_BASE + L2X0_TAG_LATENCY_CTRL);
writel_relaxed(0x441, VA_L2CC_BASE + L2X0_DATA_LATENCY_CTRL);
l2x0_init(VA_L2CC_BASE, 0x70A60001, 0xfe00ffff);
}
/*
* Following will create 16MB static virtual/physical mappings
* PHYSICAL VIRTUAL
* 0xB3000000 0xFE000000
* 0xE0000000 0xFD000000
* 0xEC000000 0xFC000000
* 0xED000000 0xFB000000
*/
struct map_desc spear13xx_io_desc[] __initdata = {
{
.virtual = VA_PERIP_GRP2_BASE,
.pfn = __phys_to_pfn(PERIP_GRP2_BASE),
.length = SZ_16M,
.type = MT_DEVICE
}, {
.virtual = VA_PERIP_GRP1_BASE,
.pfn = __phys_to_pfn(PERIP_GRP1_BASE),
.length = SZ_16M,
.type = MT_DEVICE
}, {
.virtual = VA_A9SM_AND_MPMC_BASE,
.pfn = __phys_to_pfn(A9SM_AND_MPMC_BASE),
.length = SZ_16M,
.type = MT_DEVICE
}, {
.virtual = (unsigned long)VA_L2CC_BASE,
.pfn = __phys_to_pfn(L2CC_BASE),
.length = SZ_4K,
.type = MT_DEVICE
},
};
/* This will create static memory mapping for selected devices */
void __init spear13xx_map_io(void)
{
iotable_init(spear13xx_io_desc, ARRAY_SIZE(spear13xx_io_desc));
}
static void __init spear13xx_clk_init(void)
{
if (of_machine_is_compatible("st,spear1310"))
spear1310_clk_init();
else if (of_machine_is_compatible("st,spear1340"))
spear1340_clk_init();
else
pr_err("%s: Unknown machine\n", __func__);
}
static void __init spear13xx_timer_init(void)
{
char pclk_name[] = "osc_24m_clk";
struct clk *gpt_clk, *pclk;
spear13xx_clk_init();
/* get the system timer clock */
gpt_clk = clk_get_sys("gpt0", NULL);
if (IS_ERR(gpt_clk)) {
pr_err("%s:couldn't get clk for gpt\n", __func__);
BUG();
}
/* get the suitable parent clock for timer*/
pclk = clk_get(NULL, pclk_name);
if (IS_ERR(pclk)) {
pr_err("%s:couldn't get %s as parent for gpt\n", __func__,
pclk_name);
BUG();
}
clk_set_parent(gpt_clk, pclk);
clk_put(gpt_clk);
clk_put(pclk);
spear_setup_of_timer();
twd_local_timer_of_register();
}
struct sys_timer spear13xx_timer = {
.init = spear13xx_timer_init,
};
static const struct of_device_id gic_of_match[] __initconst = {
{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init },
{ /* Sentinel */ }
};
void __init spear13xx_dt_init_irq(void)
{
of_irq_init(gic_of_match);
}

2
arch/arm/plat-samsung/Kconfig
View File

@ -419,7 +419,7 @@ config S3C_DMA
config SAMSUNG_DMADEV
bool
select DMADEVICES
select PL330_DMA if (CPU_EXYNOS4210 || CPU_S5PV210 || CPU_S5PC100 || \
select PL330_DMA if (ARCH_EXYNOS5 || ARCH_EXYNOS4 || CPU_S5PV210 || CPU_S5PC100 || \
CPU_S5P6450 || CPU_S5P6440)
select ARM_AMBA
help

2
arch/arm/plat-samsung/include/plat/cpu.h
View File

@ -202,7 +202,7 @@ extern struct bus_type s3c2443_subsys;
extern struct bus_type s3c6410_subsys;
extern struct bus_type s5p64x0_subsys;
extern struct bus_type s5pv210_subsys;
extern struct bus_type exynos4_subsys;
extern struct bus_type exynos_subsys;
extern void (*s5pc1xx_idle)(void);

2
arch/arm/plat-samsung/include/plat/devs.h
View File

@ -134,6 +134,8 @@ extern struct platform_device exynos4_device_pcm2;
extern struct platform_device exynos4_device_pd[];
extern struct platform_device exynos4_device_spdif;
extern struct platform_device exynos_device_drm;
extern struct platform_device samsung_asoc_dma;
extern struct platform_device samsung_asoc_idma;
extern struct platform_device samsung_device_keypad;

1
arch/arm/plat-samsung/include/plat/dma-pl330.h
View File

@ -90,6 +90,7 @@ enum dma_ch {
DMACH_MIPI_HSI5,
DMACH_MIPI_HSI6,
DMACH_MIPI_HSI7,
DMACH_DISP1,
DMACH_MTOM_0,
DMACH_MTOM_1,
DMACH_MTOM_2,

4
arch/arm/plat-samsung/include/plat/s5p-clock.h
View File

@ -32,8 +32,10 @@ extern struct clk clk_48m;
extern struct clk s5p_clk_27m;
extern struct clk clk_fout_apll;
extern struct clk clk_fout_bpll;
extern struct clk clk_fout_bpll_div2;
extern struct clk clk_fout_cpll;
extern struct clk clk_fout_mpll;
extern struct clk clk_fout_mpll_div2;
extern struct clk clk_fout_epll;
extern struct clk clk_fout_dpll;
extern struct clk clk_fout_vpll;
@ -42,8 +44,10 @@ extern struct clk clk_vpll;
extern struct clksrc_sources clk_src_apll;
extern struct clksrc_sources clk_src_bpll;
extern struct clksrc_sources clk_src_bpll_fout;
extern struct clksrc_sources clk_src_cpll;
extern struct clksrc_sources clk_src_mpll;
extern struct clksrc_sources clk_src_mpll_fout;
extern struct clksrc_sources clk_src_epll;
extern struct clksrc_sources clk_src_dpll;

30
arch/arm/plat-samsung/s5p-clock.c
View File

@ -67,6 +67,11 @@ struct clk clk_fout_bpll = {
.id = -1,
};
struct clk clk_fout_bpll_div2 = {
.name = "fout_bpll_div2",
.id = -1,
};
/* CPLL clock output */
struct clk clk_fout_cpll = {
@ -82,6 +87,11 @@ struct clk clk_fout_mpll = {
.id = -1,
};
struct clk clk_fout_mpll_div2 = {
.name = "fout_mpll_div2",
.id = -1,
};
/* EPLL clock output */
struct clk clk_fout_epll = {
.name = "fout_epll",
@ -125,6 +135,16 @@ struct clksrc_sources clk_src_bpll = {
.nr_sources = ARRAY_SIZE(clk_src_bpll_list),
};
static struct clk *clk_src_bpll_fout_list[] = {
[0] = &clk_fout_bpll_div2,
[1] = &clk_fout_bpll,
};
struct clksrc_sources clk_src_bpll_fout = {
.sources = clk_src_bpll_fout_list,
.nr_sources = ARRAY_SIZE(clk_src_bpll_fout_list),
};
/* Possible clock sources for CPLL Mux */
static struct clk *clk_src_cpll_list[] = {
[0] = &clk_fin_cpll,
@ -147,6 +167,16 @@ struct clksrc_sources clk_src_mpll = {
.nr_sources = ARRAY_SIZE(clk_src_mpll_list),
};
static struct clk *clk_src_mpll_fout_list[] = {
[0] = &clk_fout_mpll_div2,
[1] = &clk_fout_mpll,
};
struct clksrc_sources clk_src_mpll_fout = {
.sources = clk_src_mpll_fout_list,
.nr_sources = ARRAY_SIZE(clk_src_mpll_fout_list),
};
/* Possible clock sources for EPLL Mux */
static struct clk *clk_src_epll_list[] = {
[0] = &clk_fin_epll,

12
arch/arm/plat-spear/Kconfig
View File

@ -8,6 +8,17 @@ choice
prompt "ST SPEAr Family"
default ARCH_SPEAR3XX
config ARCH_SPEAR13XX
bool "ST SPEAr13xx with Device Tree"
select ARM_GIC
select CPU_V7
select USE_OF
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
help
Supports for ARM's SPEAR13XX family
config ARCH_SPEAR3XX
bool "ST SPEAr3xx with Device Tree"
select ARM_VIC
@ -27,6 +38,7 @@ config ARCH_SPEAR6XX
endchoice
# Adding SPEAr machine specific configuration files
source "arch/arm/mach-spear13xx/Kconfig"
source "arch/arm/mach-spear3xx/Kconfig"
source "arch/arm/mach-spear6xx/Kconfig"

5
arch/arm/plat-spear/Makefile
View File

@ -3,6 +3,7 @@
#
# Common support
obj-y := restart.o time.o pl080.o
obj-y := restart.o time.o
obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o
obj-$(CONFIG_ARCH_SPEAR3XX) += pl080.o shirq.o
obj-$(CONFIG_ARCH_SPEAR6XX) += pl080.o

5
arch/arm/plat-spear/restart.c
View File

@ -16,6 +16,7 @@
#include <mach/spear.h>
#include <mach/generic.h>
#define SPEAR13XX_SYS_SW_RES (VA_MISC_BASE + 0x204)
void spear_restart(char mode, const char *cmd)
{
if (mode == 's') {
@ -23,6 +24,10 @@ void spear_restart(char mode, const char *cmd)
soft_restart(0);
} else {
/* hardware reset, Use on-chip reset capability */
#ifdef CONFIG_ARCH_SPEAR13XX
writel_relaxed(0x01, SPEAR13XX_SYS_SW_RES);
#else
sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE);
#endif
}
}

2
drivers/clk/spear/Makefile
View File

@ -6,3 +6,5 @@ obj-y += clk.o clk-aux-synth.o clk-frac-synth.o clk-gpt-synth.o clk-vco-pll.o
obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx_clock.o
obj-$(CONFIG_ARCH_SPEAR6XX) += spear6xx_clock.o
obj-$(CONFIG_MACH_SPEAR1310) += spear1310_clock.o
obj-$(CONFIG_MACH_SPEAR1340) += spear1340_clock.o

1106
drivers/clk/spear/spear1310_clock.c Normal file
View File

File diff suppressed because it is too large Load Diff

964
drivers/clk/spear/spear1340_clock.c Normal file
View File

@ -0,0 +1,964 @@
/*
* arch/arm/mach-spear13xx/spear1340_clock.c
*
* SPEAr1340 machine clock framework source file
*
* Copyright (C) 2012 ST Microelectronics
* Viresh Kumar <viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of_platform.h>
#include <linux/spinlock_types.h>
#include <mach/spear.h>
#include "clk.h"
/* Clock Configuration Registers */
#define SPEAR1340_SYS_CLK_CTRL (VA_MISC_BASE + 0x200)
#define SPEAR1340_HCLK_SRC_SEL_SHIFT 27
#define SPEAR1340_HCLK_SRC_SEL_MASK 1
#define SPEAR1340_SCLK_SRC_SEL_SHIFT 23
#define SPEAR1340_SCLK_SRC_SEL_MASK 3
/* PLL related registers and bit values */
#define SPEAR1340_PLL_CFG (VA_MISC_BASE + 0x210)
/* PLL_CFG bit values */
#define SPEAR1340_CLCD_SYNT_CLK_MASK 1
#define SPEAR1340_CLCD_SYNT_CLK_SHIFT 31
#define SPEAR1340_GEN_SYNT2_3_CLK_SHIFT 29
#define SPEAR1340_GEN_SYNT_CLK_MASK 2
#define SPEAR1340_GEN_SYNT0_1_CLK_SHIFT 27
#define SPEAR1340_PLL_CLK_MASK 2
#define SPEAR1340_PLL3_CLK_SHIFT 24
#define SPEAR1340_PLL2_CLK_SHIFT 22
#define SPEAR1340_PLL1_CLK_SHIFT 20
#define SPEAR1340_PLL1_CTR (VA_MISC_BASE + 0x214)
#define SPEAR1340_PLL1_FRQ (VA_MISC_BASE + 0x218)
#define SPEAR1340_PLL2_CTR (VA_MISC_BASE + 0x220)
#define SPEAR1340_PLL2_FRQ (VA_MISC_BASE + 0x224)
#define SPEAR1340_PLL3_CTR (VA_MISC_BASE + 0x22C)
#define SPEAR1340_PLL3_FRQ (VA_MISC_BASE + 0x230)
#define SPEAR1340_PLL4_CTR (VA_MISC_BASE + 0x238)
#define SPEAR1340_PLL4_FRQ (VA_MISC_BASE + 0x23C)
#define SPEAR1340_PERIP_CLK_CFG (VA_MISC_BASE + 0x244)
/* PERIP_CLK_CFG bit values */
#define SPEAR1340_SPDIF_CLK_MASK 1
#define SPEAR1340_SPDIF_OUT_CLK_SHIFT 15
#define SPEAR1340_SPDIF_IN_CLK_SHIFT 14
#define SPEAR1340_GPT3_CLK_SHIFT 13
#define SPEAR1340_GPT2_CLK_SHIFT 12
#define SPEAR1340_GPT_CLK_MASK 1
#define SPEAR1340_GPT1_CLK_SHIFT 9
#define SPEAR1340_GPT0_CLK_SHIFT 8
#define SPEAR1340_UART_CLK_MASK 2
#define SPEAR1340_UART1_CLK_SHIFT 6
#define SPEAR1340_UART0_CLK_SHIFT 4
#define SPEAR1340_CLCD_CLK_MASK 2
#define SPEAR1340_CLCD_CLK_SHIFT 2
#define SPEAR1340_C3_CLK_MASK 1
#define SPEAR1340_C3_CLK_SHIFT 1
#define SPEAR1340_GMAC_CLK_CFG (VA_MISC_BASE + 0x248)
#define SPEAR1340_GMAC_PHY_CLK_MASK 1
#define SPEAR1340_GMAC_PHY_CLK_SHIFT 2
#define SPEAR1340_GMAC_PHY_INPUT_CLK_MASK 2
#define SPEAR1340_GMAC_PHY_INPUT_CLK_SHIFT 0
#define SPEAR1340_I2S_CLK_CFG (VA_MISC_BASE + 0x24C)
/* I2S_CLK_CFG register mask */
#define SPEAR1340_I2S_SCLK_X_MASK 0x1F
#define SPEAR1340_I2S_SCLK_X_SHIFT 27
#define SPEAR1340_I2S_SCLK_Y_MASK 0x1F
#define SPEAR1340_I2S_SCLK_Y_SHIFT 22
#define SPEAR1340_I2S_SCLK_EQ_SEL_SHIFT 21
#define SPEAR1340_I2S_SCLK_SYNTH_ENB 20
#define SPEAR1340_I2S_PRS1_CLK_X_MASK 0xFF
#define SPEAR1340_I2S_PRS1_CLK_X_SHIFT 12
#define SPEAR1340_I2S_PRS1_CLK_Y_MASK 0xFF
#define SPEAR1340_I2S_PRS1_CLK_Y_SHIFT 4
#define SPEAR1340_I2S_PRS1_EQ_SEL_SHIFT 3
#define SPEAR1340_I2S_REF_SEL_MASK 1
#define SPEAR1340_I2S_REF_SHIFT 2
#define SPEAR1340_I2S_SRC_CLK_MASK 2
#define SPEAR1340_I2S_SRC_CLK_SHIFT 0
#define SPEAR1340_C3_CLK_SYNT (VA_MISC_BASE + 0x250)
#define SPEAR1340_UART0_CLK_SYNT (VA_MISC_BASE + 0x254)
#define SPEAR1340_UART1_CLK_SYNT (VA_MISC_BASE + 0x258)
#define SPEAR1340_GMAC_CLK_SYNT (VA_MISC_BASE + 0x25C)
#define SPEAR1340_SDHCI_CLK_SYNT (VA_MISC_BASE + 0x260)
#define SPEAR1340_CFXD_CLK_SYNT (VA_MISC_BASE + 0x264)
#define SPEAR1340_ADC_CLK_SYNT (VA_MISC_BASE + 0x270)
#define SPEAR1340_AMBA_CLK_SYNT (VA_MISC_BASE + 0x274)
#define SPEAR1340_CLCD_CLK_SYNT (VA_MISC_BASE + 0x27C)
#define SPEAR1340_SYS_CLK_SYNT (VA_MISC_BASE + 0x284)
#define SPEAR1340_GEN_CLK_SYNT0 (VA_MISC_BASE + 0x28C)
#define SPEAR1340_GEN_CLK_SYNT1 (VA_MISC_BASE + 0x294)
#define SPEAR1340_GEN_CLK_SYNT2 (VA_MISC_BASE + 0x29C)
#define SPEAR1340_GEN_CLK_SYNT3 (VA_MISC_BASE + 0x304)
#define SPEAR1340_PERIP1_CLK_ENB (VA_MISC_BASE + 0x30C)
#define SPEAR1340_RTC_CLK_ENB 31
#define SPEAR1340_ADC_CLK_ENB 30
#define SPEAR1340_C3_CLK_ENB 29
#define SPEAR1340_CLCD_CLK_ENB 27
#define SPEAR1340_DMA_CLK_ENB 25
#define SPEAR1340_GPIO1_CLK_ENB 24
#define SPEAR1340_GPIO0_CLK_ENB 23
#define SPEAR1340_GPT1_CLK_ENB 22
#define SPEAR1340_GPT0_CLK_ENB 21
#define SPEAR1340_I2S_PLAY_CLK_ENB 20
#define SPEAR1340_I2S_REC_CLK_ENB 19
#define SPEAR1340_I2C0_CLK_ENB 18
#define SPEAR1340_SSP_CLK_ENB 17
#define SPEAR1340_UART0_CLK_ENB 15
#define SPEAR1340_PCIE_SATA_CLK_ENB 12
#define SPEAR1340_UOC_CLK_ENB 11
#define SPEAR1340_UHC1_CLK_ENB 10
#define SPEAR1340_UHC0_CLK_ENB 9
#define SPEAR1340_GMAC_CLK_ENB 8
#define SPEAR1340_CFXD_CLK_ENB 7
#define SPEAR1340_SDHCI_CLK_ENB 6
#define SPEAR1340_SMI_CLK_ENB 5
#define SPEAR1340_FSMC_CLK_ENB 4
#define SPEAR1340_SYSRAM0_CLK_ENB 3
#define SPEAR1340_SYSRAM1_CLK_ENB 2
#define SPEAR1340_SYSROM_CLK_ENB 1
#define SPEAR1340_BUS_CLK_ENB 0
#define SPEAR1340_PERIP2_CLK_ENB (VA_MISC_BASE + 0x310)
#define SPEAR1340_THSENS_CLK_ENB 8
#define SPEAR1340_I2S_REF_PAD_CLK_ENB 7
#define SPEAR1340_ACP_CLK_ENB 6
#define SPEAR1340_GPT3_CLK_ENB 5
#define SPEAR1340_GPT2_CLK_ENB 4
#define SPEAR1340_KBD_CLK_ENB 3
#define SPEAR1340_CPU_DBG_CLK_ENB 2
#define SPEAR1340_DDR_CORE_CLK_ENB 1
#define SPEAR1340_DDR_CTRL_CLK_ENB 0
#define SPEAR1340_PERIP3_CLK_ENB (VA_MISC_BASE + 0x314)
#define SPEAR1340_PLGPIO_CLK_ENB 18
#define SPEAR1340_VIDEO_DEC_CLK_ENB 16
#define SPEAR1340_VIDEO_ENC_CLK_ENB 15
#define SPEAR1340_SPDIF_OUT_CLK_ENB 13
#define SPEAR1340_SPDIF_IN_CLK_ENB 12
#define SPEAR1340_VIDEO_IN_CLK_ENB 11
#define SPEAR1340_CAM0_CLK_ENB 10
#define SPEAR1340_CAM1_CLK_ENB 9
#define SPEAR1340_CAM2_CLK_ENB 8
#define SPEAR1340_CAM3_CLK_ENB 7
#define SPEAR1340_MALI_CLK_ENB 6
#define SPEAR1340_CEC0_CLK_ENB 5
#define SPEAR1340_CEC1_CLK_ENB 4
#define SPEAR1340_PWM_CLK_ENB 3
#define SPEAR1340_I2C1_CLK_ENB 2
#define SPEAR1340_UART1_CLK_ENB 1
static DEFINE_SPINLOCK(_lock);
/* pll rate configuration table, in ascending order of rates */
static struct pll_rate_tbl pll_rtbl[] = {
/* PCLK 24MHz */
{.mode = 0, .m = 0x83, .n = 0x04, .p = 0x5}, /* vco 1572, pll 49.125 MHz */
{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x3}, /* vco 1000, pll 125 MHz */
{.mode = 0, .m = 0x64, .n = 0x06, .p = 0x1}, /* vco 800, pll 400 MHz */
{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x1}, /* vco 1000, pll 500 MHz */
{.mode = 0, .m = 0xA6, .n = 0x06, .p = 0x1}, /* vco 1328, pll 664 MHz */
{.mode = 0, .m = 0xC8, .n = 0x06, .p = 0x1}, /* vco 1600, pll 800 MHz */
{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x0}, /* vco 1, pll 1 GHz */
{.mode = 0, .m = 0x96, .n = 0x06, .p = 0x0}, /* vco 1200, pll 1200 MHz */
};
/* vco-pll4 rate configuration table, in ascending order of rates */
static struct pll_rate_tbl pll4_rtbl[] = {
{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x2}, /* vco 1000, pll 250 MHz */
{.mode = 0, .m = 0xA6, .n = 0x06, .p = 0x2}, /* vco 1328, pll 332 MHz */
{.mode = 0, .m = 0xC8, .n = 0x06, .p = 0x2}, /* vco 1600, pll 400 MHz */
{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x0}, /* vco 1, pll 1 GHz */
};
/*
* All below entries generate 166 MHz for
* different values of vco1div2
*/
static struct frac_rate_tbl amba_synth_rtbl[] = {
{.div = 0x06062}, /* for vco1div2 = 500 MHz */
{.div = 0x04D1B}, /* for vco1div2 = 400 MHz */
{.div = 0x04000}, /* for vco1div2 = 332 MHz */
{.div = 0x03031}, /* for vco1div2 = 250 MHz */
{.div = 0x0268D}, /* for vco1div2 = 200 MHz */
};
/*
* Synthesizer Clock derived from vcodiv2. This clock is one of the
* possible clocks to feed cpu directly.
* We can program this synthesizer to make cpu run on different clock
* frequencies.
* Following table provides configuration values to let cpu run on 200,
* 250, 332, 400 or 500 MHz considering different possibilites of input
* (vco1div2) clock.
*
* --------------------------------------------------------------------
* vco1div2(Mhz) fout(Mhz) cpuclk = fout/2 div
* --------------------------------------------------------------------
* 400 200 100 0x04000
* 400 250 125 0x03333
* 400 332 166 0x0268D
* 400 400 200 0x02000
* --------------------------------------------------------------------
* 500 200 100 0x05000
* 500 250 125 0x04000
* 500 332 166 0x03031
* 500 400 200 0x02800
* 500 500 250 0x02000
* --------------------------------------------------------------------
* 664 200 100 0x06a38
* 664 250 125 0x054FD
* 664 332 166 0x04000
* 664 400 200 0x0351E
* 664 500 250 0x02A7E
* --------------------------------------------------------------------
* 800 200 100 0x08000
* 800 250 125 0x06666
* 800 332 166 0x04D18
* 800 400 200 0x04000
* 800 500 250 0x03333
* --------------------------------------------------------------------
* sys rate configuration table is in descending order of divisor.
*/
static struct frac_rate_tbl sys_synth_rtbl[] = {
{.div = 0x08000},
{.div = 0x06a38},
{.div = 0x06666},
{.div = 0x054FD},
{.div = 0x05000},
{.div = 0x04D18},
{.div = 0x04000},
{.div = 0x0351E},
{.div = 0x03333},
{.div = 0x03031},
{.div = 0x02A7E},
{.div = 0x02800},
{.div = 0x0268D},
{.div = 0x02000},
};
/* aux rate configuration table, in ascending order of rates */
static struct aux_rate_tbl aux_rtbl[] = {
/* For VCO1div2 = 500 MHz */
{.xscale = 10, .yscale = 204, .eq = 0}, /* 12.29 MHz */
{.xscale = 4, .yscale = 21, .eq = 0}, /* 48 MHz */
{.xscale = 2, .yscale = 6, .eq = 0}, /* 83 MHz */
{.xscale = 2, .yscale = 4, .eq = 0}, /* 125 MHz */
{.xscale = 1, .yscale = 3, .eq = 1}, /* 166 MHz */
{.xscale = 1, .yscale = 2, .eq = 1}, /* 250 MHz */
};
/* gmac rate configuration table, in ascending order of rates */
static struct aux_rate_tbl gmac_rtbl[] = {
/* For gmac phy input clk */
{.xscale = 2, .yscale = 6, .eq = 0}, /* divided by 6 */
{.xscale = 2, .yscale = 4, .eq = 0}, /* divided by 4 */
{.xscale = 1, .yscale = 3, .eq = 1}, /* divided by 3 */
{.xscale = 1, .yscale = 2, .eq = 1}, /* divided by 2 */
};
/* clcd rate configuration table, in ascending order of rates */
static struct frac_rate_tbl clcd_rtbl[] = {
{.div = 0x14000}, /* 25 Mhz , for vc01div4 = 250 MHz*/
{.div = 0x1284B}, /* 27 Mhz , for vc01div4 = 250 MHz*/
{.div = 0x0D8D3}, /* 58 Mhz , for vco1div4 = 393 MHz */
{.div = 0x0B72C}, /* 58 Mhz , for vco1div4 = 332 MHz */
{.div = 0x089EE}, /* 58 Mhz , for vc01div4 = 250 MHz*/
{.div = 0x07BA0}, /* 65 Mhz , for vc01div4 = 250 MHz*/
{.div = 0x06f1C}, /* 72 Mhz , for vc01div4 = 250 MHz*/
{.div = 0x06E58}, /* 58 Mhz , for vco1div4 = 200 MHz */
{.div = 0x06c1B}, /* 74 Mhz , for vc01div4 = 250 MHz*/
{.div = 0x04A12}, /* 108 Mhz , for vc01div4 = 250 MHz*/
{.div = 0x0378E}, /* 144 Mhz , for vc01div4 = 250 MHz*/
{.div = 0x0360D}, /* 148 Mhz , for vc01div4 = 250 MHz*/
{.div = 0x035E0}, /* 148.5 MHz, for vc01div4 = 250 MHz*/
};
/* i2s prescaler1 masks */
static struct aux_clk_masks i2s_prs1_masks = {
.eq_sel_mask = AUX_EQ_SEL_MASK,
.eq_sel_shift = SPEAR1340_I2S_PRS1_EQ_SEL_SHIFT,
.eq1_mask = AUX_EQ1_SEL,
.eq2_mask = AUX_EQ2_SEL,
.xscale_sel_mask = SPEAR1340_I2S_PRS1_CLK_X_MASK,
.xscale_sel_shift = SPEAR1340_I2S_PRS1_CLK_X_SHIFT,
.yscale_sel_mask = SPEAR1340_I2S_PRS1_CLK_Y_MASK,
.yscale_sel_shift = SPEAR1340_I2S_PRS1_CLK_Y_SHIFT,
};
/* i2s sclk (bit clock) syynthesizers masks */
static struct aux_clk_masks i2s_sclk_masks = {
.eq_sel_mask = AUX_EQ_SEL_MASK,
.eq_sel_shift = SPEAR1340_I2S_SCLK_EQ_SEL_SHIFT,
.eq1_mask = AUX_EQ1_SEL,
.eq2_mask = AUX_EQ2_SEL,
.xscale_sel_mask = SPEAR1340_I2S_SCLK_X_MASK,
.xscale_sel_shift = SPEAR1340_I2S_SCLK_X_SHIFT,
.yscale_sel_mask = SPEAR1340_I2S_SCLK_Y_MASK,
.yscale_sel_shift = SPEAR1340_I2S_SCLK_Y_SHIFT,
.enable_bit = SPEAR1340_I2S_SCLK_SYNTH_ENB,
};
/* i2s prs1 aux rate configuration table, in ascending order of rates */
static struct aux_rate_tbl i2s_prs1_rtbl[] = {
/* For parent clk = 49.152 MHz */
{.xscale = 1, .yscale = 12, .eq = 0}, /* 2.048 MHz, smp freq = 8Khz */
{.xscale = 11, .yscale = 96, .eq = 0}, /* 2.816 MHz, smp freq = 11Khz */
{.xscale = 1, .yscale = 6, .eq = 0}, /* 4.096 MHz, smp freq = 16Khz */
{.xscale = 11, .yscale = 48, .eq = 0}, /* 5.632 MHz, smp freq = 22Khz */
/*
* with parent clk = 49.152, freq gen is 8.192 MHz, smp freq = 32Khz
* with parent clk = 12.288, freq gen is 2.048 MHz, smp freq = 8Khz
*/
{.xscale = 1, .yscale = 3, .eq = 0},
/* For parent clk = 49.152 MHz */
{.xscale = 17, .yscale = 37, .eq = 0}, /* 11.289 MHz, smp freq = 44Khz*/
{.xscale = 1, .yscale = 2, .eq = 0}, /* 12.288 MHz, smp freq = 48Khz*/
};
/* i2s sclk aux rate configuration table, in ascending order of rates */
static struct aux_rate_tbl i2s_sclk_rtbl[] = {
/* For sclk = ref_clk * x/2/y */
{.xscale = 1, .yscale = 4, .eq = 0},
{.xscale = 1, .yscale = 2, .eq = 0},
};
/* adc rate configuration table, in ascending order of rates */
/* possible adc range is 2.5 MHz to 20 MHz. */
static struct aux_rate_tbl adc_rtbl[] = {
/* For ahb = 166.67 MHz */
{.xscale = 1, .yscale = 31, .eq = 0}, /* 2.68 MHz */
{.xscale = 2, .yscale = 21, .eq = 0}, /* 7.94 MHz */
{.xscale = 4, .yscale = 21, .eq = 0}, /* 15.87 MHz */
{.xscale = 10, .yscale = 42, .eq = 0}, /* 19.84 MHz */
};
/* General synth rate configuration table, in ascending order of rates */
static struct frac_rate_tbl gen_rtbl[] = {
/* For vco1div4 = 250 MHz */
{.div = 0x1624E}, /* 22.5792 MHz */
{.div = 0x14585}, /* 24.576 MHz */
{.div = 0x14000}, /* 25 MHz */
{.div = 0x0B127}, /* 45.1584 MHz */
{.div = 0x0A000}, /* 50 MHz */
{.div = 0x061A8}, /* 81.92 MHz */
{.div = 0x05000}, /* 100 MHz */
{.div = 0x02800}, /* 200 MHz */
{.div = 0x02620}, /* 210 MHz */
{.div = 0x02460}, /* 220 MHz */
{.div = 0x022C0}, /* 230 MHz */
{.div = 0x02160}, /* 240 MHz */
{.div = 0x02000}, /* 250 MHz */
};
/* clock parents */
static const char *vco_parents[] = { "osc_24m_clk", "osc_25m_clk", };
static const char *sys_parents[] = { "none", "pll1_clk", "none", "none",
"sys_synth_clk", "none", "pll2_clk", "pll3_clk", };
static const char *ahb_parents[] = { "cpu_div3_clk", "amba_synth_clk", };
static const char *gpt_parents[] = { "osc_24m_clk", "apb_clk", };
static const char *uart0_parents[] = { "pll5_clk", "osc_24m_clk",
"uart0_synth_gate_clk", };
static const char *uart1_parents[] = { "pll5_clk", "osc_24m_clk",
"uart1_synth_gate_clk", };
static const char *c3_parents[] = { "pll5_clk", "c3_synth_gate_clk", };
static const char *gmac_phy_input_parents[] = { "gmii_125m_pad_clk", "pll2_clk",
"osc_25m_clk", };
static const char *gmac_phy_parents[] = { "gmac_phy_input_mux_clk",
"gmac_phy_synth_gate_clk", };
static const char *clcd_synth_parents[] = { "vco1div4_clk", "pll2_clk", };
static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_synth_clk", };
static const char *i2s_src_parents[] = { "vco1div2_clk", "pll2_clk", "pll3_clk",
"i2s_src_pad_clk", };
static const char *i2s_ref_parents[] = { "i2s_src_mux_clk", "i2s_prs1_clk", };
static const char *spdif_out_parents[] = { "i2s_src_pad_clk", "gen_synth2_clk",
};
static const char *spdif_in_parents[] = { "pll2_clk", "gen_synth3_clk", };
static const char *gen_synth0_1_parents[] = { "vco1div4_clk", "vco3div2_clk",
"pll3_clk", };
static const char *gen_synth2_3_parents[] = { "vco1div4_clk", "vco3div2_clk",
"pll2_clk", };
void __init spear1340_clk_init(void)
{
struct clk *clk, *clk1;
clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
clk_register_clkdev(clk, "apb_pclk", NULL);
clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT,
32000);
clk_register_clkdev(clk, "osc_32k_clk", NULL);
clk = clk_register_fixed_rate(NULL, "osc_24m_clk", NULL, CLK_IS_ROOT,
24000000);
clk_register_clkdev(clk, "osc_24m_clk", NULL);
clk = clk_register_fixed_rate(NULL, "osc_25m_clk", NULL, CLK_IS_ROOT,
25000000);
clk_register_clkdev(clk, "osc_25m_clk", NULL);
clk = clk_register_fixed_rate(NULL, "gmii_125m_pad_clk", NULL,
CLK_IS_ROOT, 125000000);
clk_register_clkdev(clk, "gmii_125m_pad_clk", NULL);
clk = clk_register_fixed_rate(NULL, "i2s_src_pad_clk", NULL,
CLK_IS_ROOT, 12288000);
clk_register_clkdev(clk, "i2s_src_pad_clk", NULL);
/* clock derived from 32 KHz osc clk */
clk = clk_register_gate(NULL, "rtc-spear", "osc_32k_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_RTC_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "fc900000.rtc");
/* clock derived from 24 or 25 MHz osc clk */
/* vco-pll */
clk = clk_register_mux(NULL, "vco1_mux_clk", vco_parents,
ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG,
SPEAR1340_PLL1_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0,
&_lock);
clk_register_clkdev(clk, "vco1_mux_clk", NULL);
clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "vco1_mux_clk",
0, SPEAR1340_PLL1_CTR, SPEAR1340_PLL1_FRQ, pll_rtbl,
ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco1_clk", NULL);
clk_register_clkdev(clk1, "pll1_clk", NULL);
clk = clk_register_mux(NULL, "vco2_mux_clk", vco_parents,
ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG,
SPEAR1340_PLL2_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0,
&_lock);
clk_register_clkdev(clk, "vco2_mux_clk", NULL);
clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "vco2_mux_clk",
0, SPEAR1340_PLL2_CTR, SPEAR1340_PLL2_FRQ, pll_rtbl,
ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco2_clk", NULL);
clk_register_clkdev(clk1, "pll2_clk", NULL);
clk = clk_register_mux(NULL, "vco3_mux_clk", vco_parents,
ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG,
SPEAR1340_PLL3_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0,
&_lock);
clk_register_clkdev(clk, "vco3_mux_clk", NULL);
clk = clk_register_vco_pll("vco3_clk", "pll3_clk", NULL, "vco3_mux_clk",
0, SPEAR1340_PLL3_CTR, SPEAR1340_PLL3_FRQ, pll_rtbl,
ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco3_clk", NULL);
clk_register_clkdev(clk1, "pll3_clk", NULL);
clk = clk_register_vco_pll("vco4_clk", "pll4_clk", NULL, "osc_24m_clk",
0, SPEAR1340_PLL4_CTR, SPEAR1340_PLL4_FRQ, pll4_rtbl,
ARRAY_SIZE(pll4_rtbl), &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco4_clk", NULL);
clk_register_clkdev(clk1, "pll4_clk", NULL);
clk = clk_register_fixed_rate(NULL, "pll5_clk", "osc_24m_clk", 0,
48000000);
clk_register_clkdev(clk, "pll5_clk", NULL);
clk = clk_register_fixed_rate(NULL, "pll6_clk", "osc_25m_clk", 0,
25000000);
clk_register_clkdev(clk, "pll6_clk", NULL);
/* vco div n clocks */
clk = clk_register_fixed_factor(NULL, "vco1div2_clk", "vco1_clk", 0, 1,
2);
clk_register_clkdev(clk, "vco1div2_clk", NULL);
clk = clk_register_fixed_factor(NULL, "vco1div4_clk", "vco1_clk", 0, 1,
4);
clk_register_clkdev(clk, "vco1div4_clk", NULL);
clk = clk_register_fixed_factor(NULL, "vco2div2_clk", "vco2_clk", 0, 1,
2);
clk_register_clkdev(clk, "vco2div2_clk", NULL);
clk = clk_register_fixed_factor(NULL, "vco3div2_clk", "vco3_clk", 0, 1,
2);
clk_register_clkdev(clk, "vco3div2_clk", NULL);
/* peripherals */
clk_register_fixed_factor(NULL, "thermal_clk", "osc_24m_clk", 0, 1,
128);
clk = clk_register_gate(NULL, "thermal_gate_clk", "thermal_clk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_THSENS_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_thermal");
/* clock derived from pll4 clk */
clk = clk_register_fixed_factor(NULL, "ddr_clk", "pll4_clk", 0, 1,
1);
clk_register_clkdev(clk, "ddr_clk", NULL);
/* clock derived from pll1 clk */
clk = clk_register_frac("sys_synth_clk", "vco1div2_clk", 0,
SPEAR1340_SYS_CLK_SYNT, sys_synth_rtbl,
ARRAY_SIZE(sys_synth_rtbl), &_lock);
clk_register_clkdev(clk, "sys_synth_clk", NULL);
clk = clk_register_frac("amba_synth_clk", "vco1div2_clk", 0,
SPEAR1340_AMBA_CLK_SYNT, amba_synth_rtbl,
ARRAY_SIZE(amba_synth_rtbl), &_lock);
clk_register_clkdev(clk, "amba_synth_clk", NULL);
clk = clk_register_mux(NULL, "sys_mux_clk", sys_parents,
ARRAY_SIZE(sys_parents), 0, SPEAR1340_SYS_CLK_CTRL,
SPEAR1340_SCLK_SRC_SEL_SHIFT,
SPEAR1340_SCLK_SRC_SEL_MASK, 0, &_lock);
clk_register_clkdev(clk, "sys_clk", NULL);
clk = clk_register_fixed_factor(NULL, "cpu_clk", "sys_mux_clk", 0, 1,
2);
clk_register_clkdev(clk, "cpu_clk", NULL);
clk = clk_register_fixed_factor(NULL, "cpu_div3_clk", "cpu_clk", 0, 1,
3);
clk_register_clkdev(clk, "cpu_div3_clk", NULL);
clk = clk_register_fixed_factor(NULL, "wdt_clk", "cpu_clk", 0, 1,
2);
clk_register_clkdev(clk, NULL, "ec800620.wdt");
clk = clk_register_mux(NULL, "ahb_clk", ahb_parents,
ARRAY_SIZE(ahb_parents), 0, SPEAR1340_SYS_CLK_CTRL,
SPEAR1340_HCLK_SRC_SEL_SHIFT,
SPEAR1340_HCLK_SRC_SEL_MASK, 0, &_lock);
clk_register_clkdev(clk, "ahb_clk", NULL);
clk = clk_register_fixed_factor(NULL, "apb_clk", "ahb_clk", 0, 1,
2);
clk_register_clkdev(clk, "apb_clk", NULL);
/* gpt clocks */
clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_GPT0_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
&_lock);
clk_register_clkdev(clk, "gpt0_mux_clk", NULL);
clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mux_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPT0_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt0");
clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_GPT1_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
&_lock);
clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPT1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt1");
clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_GPT2_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
&_lock);
clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_GPT2_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt2");
clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_GPT3_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
&_lock);
clk_register_clkdev(clk, "gpt3_mux_clk", NULL);
clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_GPT3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt3");
/* others */
clk = clk_register_aux("uart0_synth_clk", "uart0_synth_gate_clk",
"vco1div2_clk", 0, SPEAR1340_UART0_CLK_SYNT, NULL,
aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
clk_register_clkdev(clk, "uart0_synth_clk", NULL);
clk_register_clkdev(clk1, "uart0_synth_gate_clk", NULL);
clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents,
ARRAY_SIZE(uart0_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_UART0_CLK_SHIFT, SPEAR1340_UART_CLK_MASK, 0,
&_lock);
clk_register_clkdev(clk, "uart0_mux_clk", NULL);
clk = clk_register_gate(NULL, "uart0_clk", "uart0_mux_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UART0_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "e0000000.serial");
clk = clk_register_aux("uart1_synth_clk", "uart1_synth_gate_clk",
"vco1div2_clk", 0, SPEAR1340_UART1_CLK_SYNT, NULL,
aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
clk_register_clkdev(clk, "uart1_synth_clk", NULL);
clk_register_clkdev(clk1, "uart1_synth_gate_clk", NULL);
clk = clk_register_mux(NULL, "uart1_mux_clk", uart1_parents,
ARRAY_SIZE(uart1_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_UART1_CLK_SHIFT, SPEAR1340_UART_CLK_MASK, 0,
&_lock);
clk_register_clkdev(clk, "uart1_mux_clk", NULL);
clk = clk_register_gate(NULL, "uart1_clk", "uart1_mux_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UART1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b4100000.serial");
clk = clk_register_aux("sdhci_synth_clk", "sdhci_synth_gate_clk",
"vco1div2_clk", 0, SPEAR1340_SDHCI_CLK_SYNT, NULL,
aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
clk_register_clkdev(clk, "sdhci_synth_clk", NULL);
clk_register_clkdev(clk1, "sdhci_synth_gate_clk", NULL);
clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_synth_gate_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SDHCI_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b3000000.sdhci");
clk = clk_register_aux("cfxd_synth_clk", "cfxd_synth_gate_clk",
"vco1div2_clk", 0, SPEAR1340_CFXD_CLK_SYNT, NULL,
aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
clk_register_clkdev(clk, "cfxd_synth_clk", NULL);
clk_register_clkdev(clk1, "cfxd_synth_gate_clk", NULL);
clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_synth_gate_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CFXD_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b2800000.cf");
clk_register_clkdev(clk, NULL, "arasan_xd");
clk = clk_register_aux("c3_synth_clk", "c3_synth_gate_clk",
"vco1div2_clk", 0, SPEAR1340_C3_CLK_SYNT, NULL,
aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
clk_register_clkdev(clk, "c3_synth_clk", NULL);
clk_register_clkdev(clk1, "c3_synth_gate_clk", NULL);
clk = clk_register_mux(NULL, "c3_mux_clk", c3_parents,
ARRAY_SIZE(c3_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_C3_CLK_SHIFT, SPEAR1340_C3_CLK_MASK, 0,
&_lock);
clk_register_clkdev(clk, "c3_mux_clk", NULL);
clk = clk_register_gate(NULL, "c3_clk", "c3_mux_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_C3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "c3");
/* gmac */
clk = clk_register_mux(NULL, "gmac_phy_input_mux_clk",
gmac_phy_input_parents,
ARRAY_SIZE(gmac_phy_input_parents), 0,
SPEAR1340_GMAC_CLK_CFG,
SPEAR1340_GMAC_PHY_INPUT_CLK_SHIFT,
SPEAR1340_GMAC_PHY_INPUT_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, "gmac_phy_input_mux_clk", NULL);
clk = clk_register_aux("gmac_phy_synth_clk", "gmac_phy_synth_gate_clk",
"gmac_phy_input_mux_clk", 0, SPEAR1340_GMAC_CLK_SYNT,
NULL, gmac_rtbl, ARRAY_SIZE(gmac_rtbl), &_lock, &clk1);
clk_register_clkdev(clk, "gmac_phy_synth_clk", NULL);
clk_register_clkdev(clk1, "gmac_phy_synth_gate_clk", NULL);
clk = clk_register_mux(NULL, "gmac_phy_mux_clk", gmac_phy_parents,
ARRAY_SIZE(gmac_phy_parents), 0,
SPEAR1340_PERIP_CLK_CFG, SPEAR1340_GMAC_PHY_CLK_SHIFT,
SPEAR1340_GMAC_PHY_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, NULL, "stmmacphy.0");
/* clcd */
clk = clk_register_mux(NULL, "clcd_synth_mux_clk", clcd_synth_parents,
ARRAY_SIZE(clcd_synth_parents), 0,
SPEAR1340_CLCD_CLK_SYNT, SPEAR1340_CLCD_SYNT_CLK_SHIFT,
SPEAR1340_CLCD_SYNT_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, "clcd_synth_mux_clk", NULL);
clk = clk_register_frac("clcd_synth_clk", "clcd_synth_mux_clk", 0,
SPEAR1340_CLCD_CLK_SYNT, clcd_rtbl,
ARRAY_SIZE(clcd_rtbl), &_lock);
clk_register_clkdev(clk, "clcd_synth_clk", NULL);
clk = clk_register_mux(NULL, "clcd_pixel_mux_clk", clcd_pixel_parents,
ARRAY_SIZE(clcd_pixel_parents), 0,
SPEAR1340_PERIP_CLK_CFG, SPEAR1340_CLCD_CLK_SHIFT,
SPEAR1340_CLCD_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, "clcd_pixel_clk", NULL);
clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mux_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CLCD_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, "clcd_clk", NULL);
/* i2s */
clk = clk_register_mux(NULL, "i2s_src_mux_clk", i2s_src_parents,
ARRAY_SIZE(i2s_src_parents), 0, SPEAR1340_I2S_CLK_CFG,
SPEAR1340_I2S_SRC_CLK_SHIFT, SPEAR1340_I2S_SRC_CLK_MASK,
0, &_lock);
clk_register_clkdev(clk, "i2s_src_clk", NULL);
clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mux_clk", 0,
SPEAR1340_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl,
ARRAY_SIZE(i2s_prs1_rtbl), &_lock, NULL);
clk_register_clkdev(clk, "i2s_prs1_clk", NULL);
clk = clk_register_mux(NULL, "i2s_ref_mux_clk", i2s_ref_parents,
ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1340_I2S_CLK_CFG,
SPEAR1340_I2S_REF_SHIFT, SPEAR1340_I2S_REF_SEL_MASK, 0,
&_lock);
clk_register_clkdev(clk, "i2s_ref_clk", NULL);
clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mux_clk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_I2S_REF_PAD_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, "i2s_ref_pad_clk", NULL);
clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gate_clk",
"i2s_ref_mux_clk", 0, SPEAR1340_I2S_CLK_CFG,
&i2s_sclk_masks, i2s_sclk_rtbl,
ARRAY_SIZE(i2s_sclk_rtbl), &_lock, &clk1);
clk_register_clkdev(clk, "i2s_sclk_clk", NULL);
clk_register_clkdev(clk1, "i2s_sclk_gate_clk", NULL);
/* clock derived from ahb clk */
clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2C0_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "e0280000.i2c");
clk = clk_register_gate(NULL, "i2c1_clk", "ahb_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2C1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b4000000.i2c");
clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_DMA_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "ea800000.dma");
clk_register_clkdev(clk, NULL, "eb000000.dma");
clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GMAC_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "e2000000.eth");
clk = clk_register_gate(NULL, "fsmc_clk", "ahb_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_FSMC_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b0000000.flash");
clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SMI_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "ea000000.flash");
clk = clk_register_gate(NULL, "usbh0_clk", "ahb_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UHC0_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, "usbh.0_clk", NULL);
clk = clk_register_gate(NULL, "usbh1_clk", "ahb_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UHC1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, "usbh.1_clk", NULL);
clk = clk_register_gate(NULL, "uoc_clk", "ahb_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UOC_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "uoc");
clk = clk_register_gate(NULL, "pcie_sata_clk", "ahb_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_PCIE_SATA_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, NULL, "dw_pcie");
clk_register_clkdev(clk, NULL, "ahci");
clk = clk_register_gate(NULL, "sysram0_clk", "ahb_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SYSRAM0_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, "sysram0_clk", NULL);
clk = clk_register_gate(NULL, "sysram1_clk", "ahb_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SYSRAM1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, "sysram1_clk", NULL);
clk = clk_register_aux("adc_synth_clk", "adc_synth_gate_clk", "ahb_clk",
0, SPEAR1340_ADC_CLK_SYNT, NULL, adc_rtbl,
ARRAY_SIZE(adc_rtbl), &_lock, &clk1);
clk_register_clkdev(clk, "adc_synth_clk", NULL);
clk_register_clkdev(clk1, "adc_synth_gate_clk", NULL);
clk = clk_register_gate(NULL, "adc_clk", "adc_synth_gate_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_ADC_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "adc_clk");
/* clock derived from apb clk */
clk = clk_register_gate(NULL, "ssp_clk", "apb_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SSP_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "e0100000.spi");
clk = clk_register_gate(NULL, "gpio0_clk", "apb_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPIO0_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "e0600000.gpio");
clk = clk_register_gate(NULL, "gpio1_clk", "apb_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPIO1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "e0680000.gpio");
clk = clk_register_gate(NULL, "i2s_play_clk", "apb_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2S_PLAY_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b2400000.i2s");
clk = clk_register_gate(NULL, "i2s_rec_clk", "apb_clk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2S_REC_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b2000000.i2s");
clk = clk_register_gate(NULL, "kbd_clk", "apb_clk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_KBD_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "e0300000.kbd");
/* RAS clks */
clk = clk_register_mux(NULL, "gen_synth0_1_mux_clk",
gen_synth0_1_parents, ARRAY_SIZE(gen_synth0_1_parents),
0, SPEAR1340_PLL_CFG, SPEAR1340_GEN_SYNT0_1_CLK_SHIFT,
SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, "gen_synth0_1_clk", NULL);
clk = clk_register_mux(NULL, "gen_synth2_3_mux_clk",
gen_synth2_3_parents, ARRAY_SIZE(gen_synth2_3_parents),
0, SPEAR1340_PLL_CFG, SPEAR1340_GEN_SYNT2_3_CLK_SHIFT,
SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, "gen_synth2_3_clk", NULL);
clk = clk_register_frac("gen_synth0_clk", "gen_synth0_1_clk", 0,
SPEAR1340_GEN_CLK_SYNT0, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
clk_register_clkdev(clk, "gen_synth0_clk", NULL);
clk = clk_register_frac("gen_synth1_clk", "gen_synth0_1_clk", 0,
SPEAR1340_GEN_CLK_SYNT1, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
clk_register_clkdev(clk, "gen_synth1_clk", NULL);
clk = clk_register_frac("gen_synth2_clk", "gen_synth2_3_clk", 0,
SPEAR1340_GEN_CLK_SYNT2, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
clk_register_clkdev(clk, "gen_synth2_clk", NULL);
clk = clk_register_frac("gen_synth3_clk", "gen_synth2_3_clk", 0,
SPEAR1340_GEN_CLK_SYNT3, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
clk_register_clkdev(clk, "gen_synth3_clk", NULL);
clk = clk_register_gate(NULL, "mali_clk", "gen_synth3_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_MALI_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "mali");
clk = clk_register_gate(NULL, "cec0_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CEC0_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_cec.0");
clk = clk_register_gate(NULL, "cec1_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CEC1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_cec.1");
clk = clk_register_mux(NULL, "spdif_out_mux_clk", spdif_out_parents,
ARRAY_SIZE(spdif_out_parents), 0,
SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_OUT_CLK_SHIFT,
SPEAR1340_SPDIF_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, "spdif_out_mux_clk", NULL);
clk = clk_register_gate(NULL, "spdif_out_clk", "spdif_out_mux_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_OUT_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, NULL, "spdif-out");
clk = clk_register_mux(NULL, "spdif_in_mux_clk", spdif_in_parents,
ARRAY_SIZE(spdif_in_parents), 0,
SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_IN_CLK_SHIFT,
SPEAR1340_SPDIF_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, "spdif_in_mux_clk", NULL);
clk = clk_register_gate(NULL, "spdif_in_clk", "spdif_in_mux_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_IN_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spdif-in");
clk = clk_register_gate(NULL, "acp_clk", "acp_mux_clk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_ACP_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "acp_clk");
clk = clk_register_gate(NULL, "plgpio_clk", "plgpio_mux_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PLGPIO_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "plgpio");
clk = clk_register_gate(NULL, "video_dec_clk", "video_dec_mux_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_DEC_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, NULL, "video_dec");
clk = clk_register_gate(NULL, "video_enc_clk", "video_enc_mux_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_ENC_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, NULL, "video_enc");
clk = clk_register_gate(NULL, "video_in_clk", "video_in_mux_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_IN_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_vip");
clk = clk_register_gate(NULL, "cam0_clk", "cam0_mux_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM0_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_camif.0");
clk = clk_register_gate(NULL, "cam1_clk", "cam1_mux_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_camif.1");
clk = clk_register_gate(NULL, "cam2_clk", "cam2_mux_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM2_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_camif.2");
clk = clk_register_gate(NULL, "cam3_clk", "cam3_mux_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_camif.3");
clk = clk_register_gate(NULL, "pwm_clk", "pwm_mux_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PWM_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "pwm");
}

11
drivers/gpio/gpio-samsung.c
View File

@ -2452,6 +2452,12 @@ static struct samsung_gpio_chip exynos5_gpios_1[] = {
.ngpio = EXYNOS5_GPIO_C3_NR,
.label = "GPC3",
},
}, {
.chip = {
.base = EXYNOS5_GPC4(0),
.ngpio = EXYNOS5_GPIO_C4_NR,
.label = "GPC4",
},
}, {
.chip = {
.base = EXYNOS5_GPD0(0),
@ -2826,8 +2832,11 @@ static __init void exynos5_gpiolib_init(void)
goto err_ioremap1;
}
/* need to set base address for gpc4 */
exonys5_gpios_1[11].base = gpio_base1 + 0x2E0;
/* need to set base address for gpx */
chip = &exynos5_gpios_1[20];
chip = &exynos5_gpios_1[21];
gpx_base = gpio_base1 + 0xC00;
for (i = 0; i < 4; i++, chip++, gpx_base += 0x20)
chip->base = gpx_base;

10
drivers/pinctrl/spear/Kconfig
View File

@ -31,4 +31,14 @@ config PINCTRL_SPEAR320
depends on MACH_SPEAR320
select PINCTRL_SPEAR3XX
config PINCTRL_SPEAR1310
bool "ST Microelectronics SPEAr1310 SoC pin controller driver"
depends on MACH_SPEAR1310
select PINCTRL_SPEAR
config PINCTRL_SPEAR1340
bool "ST Microelectronics SPEAr1340 SoC pin controller driver"
depends on MACH_SPEAR1340
select PINCTRL_SPEAR
endif

2
drivers/pinctrl/spear/Makefile
View File

@ -5,3 +5,5 @@ obj-$(CONFIG_PINCTRL_SPEAR3XX) += pinctrl-spear3xx.o
obj-$(CONFIG_PINCTRL_SPEAR300) += pinctrl-spear300.o
obj-$(CONFIG_PINCTRL_SPEAR310) += pinctrl-spear310.o
obj-$(CONFIG_PINCTRL_SPEAR320) += pinctrl-spear320.o
obj-$(CONFIG_PINCTRL_SPEAR1310) += pinctrl-spear1310.o
obj-$(CONFIG_PINCTRL_SPEAR1340) += pinctrl-spear1340.o

251
drivers/pinctrl/spear/pinctrl-spear.h
View File

@ -139,4 +139,255 @@ void __devinit pmx_init_addr(struct spear_pinctrl_machdata *machdata, u16 reg);
int __devinit spear_pinctrl_probe(struct platform_device *pdev,
struct spear_pinctrl_machdata *machdata);
int __devexit spear_pinctrl_remove(struct platform_device *pdev);
#define SPEAR_PIN_0_TO_101 \
PINCTRL_PIN(0, "PLGPIO0"), \
PINCTRL_PIN(1, "PLGPIO1"), \
PINCTRL_PIN(2, "PLGPIO2"), \
PINCTRL_PIN(3, "PLGPIO3"), \
PINCTRL_PIN(4, "PLGPIO4"), \
PINCTRL_PIN(5, "PLGPIO5"), \
PINCTRL_PIN(6, "PLGPIO6"), \
PINCTRL_PIN(7, "PLGPIO7"), \
PINCTRL_PIN(8, "PLGPIO8"), \
PINCTRL_PIN(9, "PLGPIO9"), \
PINCTRL_PIN(10, "PLGPIO10"), \
PINCTRL_PIN(11, "PLGPIO11"), \
PINCTRL_PIN(12, "PLGPIO12"), \
PINCTRL_PIN(13, "PLGPIO13"), \
PINCTRL_PIN(14, "PLGPIO14"), \
PINCTRL_PIN(15, "PLGPIO15"), \
PINCTRL_PIN(16, "PLGPIO16"), \
PINCTRL_PIN(17, "PLGPIO17"), \
PINCTRL_PIN(18, "PLGPIO18"), \
PINCTRL_PIN(19, "PLGPIO19"), \
PINCTRL_PIN(20, "PLGPIO20"), \
PINCTRL_PIN(21, "PLGPIO21"), \
PINCTRL_PIN(22, "PLGPIO22"), \
PINCTRL_PIN(23, "PLGPIO23"), \
PINCTRL_PIN(24, "PLGPIO24"), \
PINCTRL_PIN(25, "PLGPIO25"), \
PINCTRL_PIN(26, "PLGPIO26"), \
PINCTRL_PIN(27, "PLGPIO27"), \
PINCTRL_PIN(28, "PLGPIO28"), \
PINCTRL_PIN(29, "PLGPIO29"), \
PINCTRL_PIN(30, "PLGPIO30"), \
PINCTRL_PIN(31, "PLGPIO31"), \
PINCTRL_PIN(32, "PLGPIO32"), \
PINCTRL_PIN(33, "PLGPIO33"), \
PINCTRL_PIN(34, "PLGPIO34"), \
PINCTRL_PIN(35, "PLGPIO35"), \
PINCTRL_PIN(36, "PLGPIO36"), \
PINCTRL_PIN(37, "PLGPIO37"), \
PINCTRL_PIN(38, "PLGPIO38"), \
PINCTRL_PIN(39, "PLGPIO39"), \
PINCTRL_PIN(40, "PLGPIO40"), \
PINCTRL_PIN(41, "PLGPIO41"), \
PINCTRL_PIN(42, "PLGPIO42"), \
PINCTRL_PIN(43, "PLGPIO43"), \
PINCTRL_PIN(44, "PLGPIO44"), \
PINCTRL_PIN(45, "PLGPIO45"), \
PINCTRL_PIN(46, "PLGPIO46"), \
PINCTRL_PIN(47, "PLGPIO47"), \
PINCTRL_PIN(48, "PLGPIO48"), \
PINCTRL_PIN(49, "PLGPIO49"), \
PINCTRL_PIN(50, "PLGPIO50"), \
PINCTRL_PIN(51, "PLGPIO51"), \
PINCTRL_PIN(52, "PLGPIO52"), \
PINCTRL_PIN(53, "PLGPIO53"), \
PINCTRL_PIN(54, "PLGPIO54"), \
PINCTRL_PIN(55, "PLGPIO55"), \
PINCTRL_PIN(56, "PLGPIO56"), \
PINCTRL_PIN(57, "PLGPIO57"), \
PINCTRL_PIN(58, "PLGPIO58"), \
PINCTRL_PIN(59, "PLGPIO59"), \
PINCTRL_PIN(60, "PLGPIO60"), \
PINCTRL_PIN(61, "PLGPIO61"), \
PINCTRL_PIN(62, "PLGPIO62"), \
PINCTRL_PIN(63, "PLGPIO63"), \
PINCTRL_PIN(64, "PLGPIO64"), \
PINCTRL_PIN(65, "PLGPIO65"), \
PINCTRL_PIN(66, "PLGPIO66"), \
PINCTRL_PIN(67, "PLGPIO67"), \
PINCTRL_PIN(68, "PLGPIO68"), \
PINCTRL_PIN(69, "PLGPIO69"), \
PINCTRL_PIN(70, "PLGPIO70"), \
PINCTRL_PIN(71, "PLGPIO71"), \
PINCTRL_PIN(72, "PLGPIO72"), \
PINCTRL_PIN(73, "PLGPIO73"), \
PINCTRL_PIN(74, "PLGPIO74"), \
PINCTRL_PIN(75, "PLGPIO75"), \
PINCTRL_PIN(76, "PLGPIO76"), \
PINCTRL_PIN(77, "PLGPIO77"), \
PINCTRL_PIN(78, "PLGPIO78"), \
PINCTRL_PIN(79, "PLGPIO79"), \
PINCTRL_PIN(80, "PLGPIO80"), \
PINCTRL_PIN(81, "PLGPIO81"), \
PINCTRL_PIN(82, "PLGPIO82"), \
PINCTRL_PIN(83, "PLGPIO83"), \
PINCTRL_PIN(84, "PLGPIO84"), \
PINCTRL_PIN(85, "PLGPIO85"), \
PINCTRL_PIN(86, "PLGPIO86"), \
PINCTRL_PIN(87, "PLGPIO87"), \
PINCTRL_PIN(88, "PLGPIO88"), \
PINCTRL_PIN(89, "PLGPIO89"), \
PINCTRL_PIN(90, "PLGPIO90"), \
PINCTRL_PIN(91, "PLGPIO91"), \
PINCTRL_PIN(92, "PLGPIO92"), \
PINCTRL_PIN(93, "PLGPIO93"), \
PINCTRL_PIN(94, "PLGPIO94"), \
PINCTRL_PIN(95, "PLGPIO95"), \
PINCTRL_PIN(96, "PLGPIO96"), \
PINCTRL_PIN(97, "PLGPIO97"), \
PINCTRL_PIN(98, "PLGPIO98"), \
PINCTRL_PIN(99, "PLGPIO99"), \
PINCTRL_PIN(100, "PLGPIO100"), \
PINCTRL_PIN(101, "PLGPIO101")
#define SPEAR_PIN_102_TO_245 \
PINCTRL_PIN(102, "PLGPIO102"), \
PINCTRL_PIN(103, "PLGPIO103"), \
PINCTRL_PIN(104, "PLGPIO104"), \
PINCTRL_PIN(105, "PLGPIO105"), \
PINCTRL_PIN(106, "PLGPIO106"), \
PINCTRL_PIN(107, "PLGPIO107"), \
PINCTRL_PIN(108, "PLGPIO108"), \
PINCTRL_PIN(109, "PLGPIO109"), \
PINCTRL_PIN(110, "PLGPIO110"), \
PINCTRL_PIN(111, "PLGPIO111"), \
PINCTRL_PIN(112, "PLGPIO112"), \
PINCTRL_PIN(113, "PLGPIO113"), \
PINCTRL_PIN(114, "PLGPIO114"), \
PINCTRL_PIN(115, "PLGPIO115"), \
PINCTRL_PIN(116, "PLGPIO116"), \
PINCTRL_PIN(117, "PLGPIO117"), \
PINCTRL_PIN(118, "PLGPIO118"), \
PINCTRL_PIN(119, "PLGPIO119"), \
PINCTRL_PIN(120, "PLGPIO120"), \
PINCTRL_PIN(121, "PLGPIO121"), \
PINCTRL_PIN(122, "PLGPIO122"), \
PINCTRL_PIN(123, "PLGPIO123"), \
PINCTRL_PIN(124, "PLGPIO124"), \
PINCTRL_PIN(125, "PLGPIO125"), \
PINCTRL_PIN(126, "PLGPIO126"), \
PINCTRL_PIN(127, "PLGPIO127"), \
PINCTRL_PIN(128, "PLGPIO128"), \
PINCTRL_PIN(129, "PLGPIO129"), \
PINCTRL_PIN(130, "PLGPIO130"), \
PINCTRL_PIN(131, "PLGPIO131"), \
PINCTRL_PIN(132, "PLGPIO132"), \
PINCTRL_PIN(133, "PLGPIO133"), \
PINCTRL_PIN(134, "PLGPIO134"), \
PINCTRL_PIN(135, "PLGPIO135"), \
PINCTRL_PIN(136, "PLGPIO136"), \
PINCTRL_PIN(137, "PLGPIO137"), \
PINCTRL_PIN(138, "PLGPIO138"), \
PINCTRL_PIN(139, "PLGPIO139"), \
PINCTRL_PIN(140, "PLGPIO140"), \
PINCTRL_PIN(141, "PLGPIO141"), \
PINCTRL_PIN(142, "PLGPIO142"), \
PINCTRL_PIN(143, "PLGPIO143"), \
PINCTRL_PIN(144, "PLGPIO144"), \
PINCTRL_PIN(145, "PLGPIO145"), \
PINCTRL_PIN(146, "PLGPIO146"), \
PINCTRL_PIN(147, "PLGPIO147"), \
PINCTRL_PIN(148, "PLGPIO148"), \
PINCTRL_PIN(149, "PLGPIO149"), \
PINCTRL_PIN(150, "PLGPIO150"), \
PINCTRL_PIN(151, "PLGPIO151"), \
PINCTRL_PIN(152, "PLGPIO152"), \
PINCTRL_PIN(153, "PLGPIO153"), \
PINCTRL_PIN(154, "PLGPIO154"), \
PINCTRL_PIN(155, "PLGPIO155"), \
PINCTRL_PIN(156, "PLGPIO156"), \
PINCTRL_PIN(157, "PLGPIO157"), \
PINCTRL_PIN(158, "PLGPIO158"), \
PINCTRL_PIN(159, "PLGPIO159"), \
PINCTRL_PIN(160, "PLGPIO160"), \
PINCTRL_PIN(161, "PLGPIO161"), \
PINCTRL_PIN(162, "PLGPIO162"), \
PINCTRL_PIN(163, "PLGPIO163"), \
PINCTRL_PIN(164, "PLGPIO164"), \
PINCTRL_PIN(165, "PLGPIO165"), \
PINCTRL_PIN(166, "PLGPIO166"), \
PINCTRL_PIN(167, "PLGPIO167"), \
PINCTRL_PIN(168, "PLGPIO168"), \
PINCTRL_PIN(169, "PLGPIO169"), \
PINCTRL_PIN(170, "PLGPIO170"), \
PINCTRL_PIN(171, "PLGPIO171"), \
PINCTRL_PIN(172, "PLGPIO172"), \
PINCTRL_PIN(173, "PLGPIO173"), \
PINCTRL_PIN(174, "PLGPIO174"), \
PINCTRL_PIN(175, "PLGPIO175"), \
PINCTRL_PIN(176, "PLGPIO176"), \
PINCTRL_PIN(177, "PLGPIO177"), \
PINCTRL_PIN(178, "PLGPIO178"), \
PINCTRL_PIN(179, "PLGPIO179"), \
PINCTRL_PIN(180, "PLGPIO180"), \
PINCTRL_PIN(181, "PLGPIO181"), \
PINCTRL_PIN(182, "PLGPIO182"), \
PINCTRL_PIN(183, "PLGPIO183"), \
PINCTRL_PIN(184, "PLGPIO184"), \
PINCTRL_PIN(185, "PLGPIO185"), \
PINCTRL_PIN(186, "PLGPIO186"), \
PINCTRL_PIN(187, "PLGPIO187"), \
PINCTRL_PIN(188, "PLGPIO188"), \
PINCTRL_PIN(189, "PLGPIO189"), \
PINCTRL_PIN(190, "PLGPIO190"), \
PINCTRL_PIN(191, "PLGPIO191"), \
PINCTRL_PIN(192, "PLGPIO192"), \
PINCTRL_PIN(193, "PLGPIO193"), \
PINCTRL_PIN(194, "PLGPIO194"), \
PINCTRL_PIN(195, "PLGPIO195"), \
PINCTRL_PIN(196, "PLGPIO196"), \
PINCTRL_PIN(197, "PLGPIO197"), \
PINCTRL_PIN(198, "PLGPIO198"), \
PINCTRL_PIN(199, "PLGPIO199"), \
PINCTRL_PIN(200, "PLGPIO200"), \
PINCTRL_PIN(201, "PLGPIO201"), \
PINCTRL_PIN(202, "PLGPIO202"), \
PINCTRL_PIN(203, "PLGPIO203"), \
PINCTRL_PIN(204, "PLGPIO204"), \
PINCTRL_PIN(205, "PLGPIO205"), \
PINCTRL_PIN(206, "PLGPIO206"), \
PINCTRL_PIN(207, "PLGPIO207"), \
PINCTRL_PIN(208, "PLGPIO208"), \
PINCTRL_PIN(209, "PLGPIO209"), \
PINCTRL_PIN(210, "PLGPIO210"), \
PINCTRL_PIN(211, "PLGPIO211"), \
PINCTRL_PIN(212, "PLGPIO212"), \
PINCTRL_PIN(213, "PLGPIO213"), \
PINCTRL_PIN(214, "PLGPIO214"), \
PINCTRL_PIN(215, "PLGPIO215"), \
PINCTRL_PIN(216, "PLGPIO216"), \
PINCTRL_PIN(217, "PLGPIO217"), \
PINCTRL_PIN(218, "PLGPIO218"), \
PINCTRL_PIN(219, "PLGPIO219"), \
PINCTRL_PIN(220, "PLGPIO220"), \
PINCTRL_PIN(221, "PLGPIO221"), \
PINCTRL_PIN(222, "PLGPIO222"), \
PINCTRL_PIN(223, "PLGPIO223"), \
PINCTRL_PIN(224, "PLGPIO224"), \
PINCTRL_PIN(225, "PLGPIO225"), \
PINCTRL_PIN(226, "PLGPIO226"), \
PINCTRL_PIN(227, "PLGPIO227"), \
PINCTRL_PIN(228, "PLGPIO228"), \
PINCTRL_PIN(229, "PLGPIO229"), \
PINCTRL_PIN(230, "PLGPIO230"), \
PINCTRL_PIN(231, "PLGPIO231"), \
PINCTRL_PIN(232, "PLGPIO232"), \
PINCTRL_PIN(233, "PLGPIO233"), \
PINCTRL_PIN(234, "PLGPIO234"), \
PINCTRL_PIN(235, "PLGPIO235"), \
PINCTRL_PIN(236, "PLGPIO236"), \
PINCTRL_PIN(237, "PLGPIO237"), \
PINCTRL_PIN(238, "PLGPIO238"), \
PINCTRL_PIN(239, "PLGPIO239"), \
PINCTRL_PIN(240, "PLGPIO240"), \
PINCTRL_PIN(241, "PLGPIO241"), \
PINCTRL_PIN(242, "PLGPIO242"), \
PINCTRL_PIN(243, "PLGPIO243"), \
PINCTRL_PIN(244, "PLGPIO244"), \
PINCTRL_PIN(245, "PLGPIO245")
#endif /* __PINMUX_SPEAR_H__ */

2198
drivers/pinctrl/spear/pinctrl-spear1310.c Normal file
View File

File diff suppressed because it is too large Load Diff

1989
drivers/pinctrl/spear/pinctrl-spear1340.c Normal file
View File

File diff suppressed because it is too large Load Diff

103
drivers/pinctrl/spear/pinctrl-spear3xx.c
View File

@ -15,108 +15,7 @@
/* pins */
static const struct pinctrl_pin_desc spear3xx_pins[] = {
PINCTRL_PIN(0, "PLGPIO0"),
PINCTRL_PIN(1, "PLGPIO1"),
PINCTRL_PIN(2, "PLGPIO2"),
PINCTRL_PIN(3, "PLGPIO3"),
PINCTRL_PIN(4, "PLGPIO4"),
PINCTRL_PIN(5, "PLGPIO5"),
PINCTRL_PIN(6, "PLGPIO6"),
PINCTRL_PIN(7, "PLGPIO7"),
PINCTRL_PIN(8, "PLGPIO8"),
PINCTRL_PIN(9, "PLGPIO9"),
PINCTRL_PIN(10, "PLGPIO10"),
PINCTRL_PIN(11, "PLGPIO11"),
PINCTRL_PIN(12, "PLGPIO12"),
PINCTRL_PIN(13, "PLGPIO13"),
PINCTRL_PIN(14, "PLGPIO14"),
PINCTRL_PIN(15, "PLGPIO15"),
PINCTRL_PIN(16, "PLGPIO16"),
PINCTRL_PIN(17, "PLGPIO17"),
PINCTRL_PIN(18, "PLGPIO18"),
PINCTRL_PIN(19, "PLGPIO19"),
PINCTRL_PIN(20, "PLGPIO20"),
PINCTRL_PIN(21, "PLGPIO21"),
PINCTRL_PIN(22, "PLGPIO22"),
PINCTRL_PIN(23, "PLGPIO23"),
PINCTRL_PIN(24, "PLGPIO24"),
PINCTRL_PIN(25, "PLGPIO25"),
PINCTRL_PIN(26, "PLGPIO26"),
PINCTRL_PIN(27, "PLGPIO27"),
PINCTRL_PIN(28, "PLGPIO28"),
PINCTRL_PIN(29, "PLGPIO29"),
PINCTRL_PIN(30, "PLGPIO30"),
PINCTRL_PIN(31, "PLGPIO31"),
PINCTRL_PIN(32, "PLGPIO32"),
PINCTRL_PIN(33, "PLGPIO33"),
PINCTRL_PIN(34, "PLGPIO34"),
PINCTRL_PIN(35, "PLGPIO35"),
PINCTRL_PIN(36, "PLGPIO36"),
PINCTRL_PIN(37, "PLGPIO37"),
PINCTRL_PIN(38, "PLGPIO38"),
PINCTRL_PIN(39, "PLGPIO39"),
PINCTRL_PIN(40, "PLGPIO40"),
PINCTRL_PIN(41, "PLGPIO41"),
PINCTRL_PIN(42, "PLGPIO42"),
PINCTRL_PIN(43, "PLGPIO43"),
PINCTRL_PIN(44, "PLGPIO44"),
PINCTRL_PIN(45, "PLGPIO45"),
PINCTRL_PIN(46, "PLGPIO46"),
PINCTRL_PIN(47, "PLGPIO47"),
PINCTRL_PIN(48, "PLGPIO48"),
PINCTRL_PIN(49, "PLGPIO49"),
PINCTRL_PIN(50, "PLGPIO50"),
PINCTRL_PIN(51, "PLGPIO51"),
PINCTRL_PIN(52, "PLGPIO52"),
PINCTRL_PIN(53, "PLGPIO53"),
PINCTRL_PIN(54, "PLGPIO54"),
PINCTRL_PIN(55, "PLGPIO55"),
PINCTRL_PIN(56, "PLGPIO56"),
PINCTRL_PIN(57, "PLGPIO57"),
PINCTRL_PIN(58, "PLGPIO58"),
PINCTRL_PIN(59, "PLGPIO59"),
PINCTRL_PIN(60, "PLGPIO60"),
PINCTRL_PIN(61, "PLGPIO61"),
PINCTRL_PIN(62, "PLGPIO62"),
PINCTRL_PIN(63, "PLGPIO63"),
PINCTRL_PIN(64, "PLGPIO64"),
PINCTRL_PIN(65, "PLGPIO65"),
PINCTRL_PIN(66, "PLGPIO66"),
PINCTRL_PIN(67, "PLGPIO67"),
PINCTRL_PIN(68, "PLGPIO68"),
PINCTRL_PIN(69, "PLGPIO69"),
PINCTRL_PIN(70, "PLGPIO70"),
PINCTRL_PIN(71, "PLGPIO71"),
PINCTRL_PIN(72, "PLGPIO72"),
PINCTRL_PIN(73, "PLGPIO73"),
PINCTRL_PIN(74, "PLGPIO74"),
PINCTRL_PIN(75, "PLGPIO75"),
PINCTRL_PIN(76, "PLGPIO76"),
PINCTRL_PIN(77, "PLGPIO77"),
PINCTRL_PIN(78, "PLGPIO78"),
PINCTRL_PIN(79, "PLGPIO79"),
PINCTRL_PIN(80, "PLGPIO80"),
PINCTRL_PIN(81, "PLGPIO81"),
PINCTRL_PIN(82, "PLGPIO82"),
PINCTRL_PIN(83, "PLGPIO83"),
PINCTRL_PIN(84, "PLGPIO84"),
PINCTRL_PIN(85, "PLGPIO85"),
PINCTRL_PIN(86, "PLGPIO86"),
PINCTRL_PIN(87, "PLGPIO87"),
PINCTRL_PIN(88, "PLGPIO88"),
PINCTRL_PIN(89, "PLGPIO89"),
PINCTRL_PIN(90, "PLGPIO90"),
PINCTRL_PIN(91, "PLGPIO91"),
PINCTRL_PIN(92, "PLGPIO92"),
PINCTRL_PIN(93, "PLGPIO93"),
PINCTRL_PIN(94, "PLGPIO94"),
PINCTRL_PIN(95, "PLGPIO95"),
PINCTRL_PIN(96, "PLGPIO96"),
PINCTRL_PIN(97, "PLGPIO97"),
PINCTRL_PIN(98, "PLGPIO98"),
PINCTRL_PIN(99, "PLGPIO99"),
PINCTRL_PIN(100, "PLGPIO100"),
PINCTRL_PIN(101, "PLGPIO101"),
SPEAR_PIN_0_TO_101,
};
/* firda_pins */

2
drivers/spi/Kconfig
View File

@ -311,7 +311,7 @@ config SPI_S3C24XX_FIQ
config SPI_S3C64XX
tristate "Samsung S3C64XX series type SPI"
depends on (ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS)
depends on (ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS)
select S3C64XX_DMA if ARCH_S3C64XX
help
SPI driver for Samsung S3C64XX and newer SoCs.