dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

mfd: Add STMPE I/O Expander support 

Add support for the STMPE family of I/O Expanders from
STMicroelectronics.  These devices include upto 24 gpios and a varying
selection of blocks, including PWM, keypad, and touchscreen controllers.
This patch adds the MFD core.

[l.fu@pengutronix.de: fix stmpe811 enable hook]
[l.fu@pengutronix.de: add touchscreen platform data]
Acked-by: Luotao Fu <l.fu@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
Rabin Vincent 2010-07-02 16:52:08 +05:30 committed by Samuel Ortiz
parent d2d272a965
commit 27e34995e1
5 changed files with 1312 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
drivers/mfd/Kconfig
View File

@ -186,6 +186,29 @@ config TWL4030_CODEC
select MFD_CORE
default n
config MFD_STMPE
bool "Support STMicroelectronics STMPE"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
help
Support for the STMPE family of I/O Expanders from
STMicroelectronics.
Currently supported devices are:
STMPE811: GPIO, Touchscreen
STMPE1601: GPIO, Keypad
STMPE2401: GPIO, Keypad
STMPE2403: GPIO, Keypad
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the functionality
of the device. Currently available sub drivers are:
GPIO: stmpe-gpio
Keypad: stmpe-keypad
Touchscreen: stmpe-ts
config MFD_TC35892
bool "Support Toshiba TC35892"
depends on I2C=y && GENERIC_HARDIRQS

1
drivers/mfd/Makefile
View File

@ -15,6 +15,7 @@ obj-$(CONFIG_HTC_I2CPLD) += htc-i2cpld.o
obj-$(CONFIG_MFD_DAVINCI_VOICECODEC) += davinci_voicecodec.o
obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
obj-$(CONFIG_MFD_STMPE) += stmpe.o
obj-$(CONFIG_MFD_TC35892) += tc35892.o
obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o tmio_core.o
obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o tmio_core.o

915
drivers/mfd/stmpe.c Normal file
View File

@ -0,0 +1,915 @@
/*
* Copyright (C) ST-Ericsson SA 2010
*
* License Terms: GNU General Public License, version 2
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/mfd/core.h>
#include <linux/mfd/stmpe.h>
#include "stmpe.h"
static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
{
return stmpe->variant->enable(stmpe, blocks, true);
}
static int __stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
{
return stmpe->variant->enable(stmpe, blocks, false);
}
static int __stmpe_reg_read(struct stmpe *stmpe, u8 reg)
{
int ret;
ret = i2c_smbus_read_byte_data(stmpe->i2c, reg);
if (ret < 0)
dev_err(stmpe->dev, "failed to read reg %#x: %d\n",
reg, ret);
dev_vdbg(stmpe->dev, "rd: reg %#x => data %#x\n", reg, ret);
return ret;
}
static int __stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
{
int ret;
dev_vdbg(stmpe->dev, "wr: reg %#x <= %#x\n", reg, val);
ret = i2c_smbus_write_byte_data(stmpe->i2c, reg, val);
if (ret < 0)
dev_err(stmpe->dev, "failed to write reg %#x: %d\n",
reg, ret);
return ret;
}
static int __stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
{
int ret;
ret = __stmpe_reg_read(stmpe, reg);
if (ret < 0)
return ret;
ret &= ~mask;
ret |= val;
return __stmpe_reg_write(stmpe, reg, ret);
}
static int __stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length,
u8 *values)
{
int ret;
ret = i2c_smbus_read_i2c_block_data(stmpe->i2c, reg, length, values);
if (ret < 0)
dev_err(stmpe->dev, "failed to read regs %#x: %d\n",
reg, ret);
dev_vdbg(stmpe->dev, "rd: reg %#x (%d) => ret %#x\n", reg, length, ret);
stmpe_dump_bytes("stmpe rd: ", values, length);
return ret;
}
static int __stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
const u8 *values)
{
int ret;
dev_vdbg(stmpe->dev, "wr: regs %#x (%d)\n", reg, length);
stmpe_dump_bytes("stmpe wr: ", values, length);
ret = i2c_smbus_write_i2c_block_data(stmpe->i2c, reg, length,
values);
if (ret < 0)
dev_err(stmpe->dev, "failed to write regs %#x: %d\n",
reg, ret);
return ret;
}
/**
* stmpe_enable - enable blocks on an STMPE device
* @stmpe: Device to work on
* @blocks: Mask of blocks (enum stmpe_block values) to enable
*/
int stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
{
int ret;
mutex_lock(&stmpe->lock);
ret = __stmpe_enable(stmpe, blocks);
mutex_unlock(&stmpe->lock);
return ret;
}
EXPORT_SYMBOL_GPL(stmpe_enable);
/**
* stmpe_disable - disable blocks on an STMPE device
* @stmpe: Device to work on
* @blocks: Mask of blocks (enum stmpe_block values) to enable
*/
int stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
{
int ret;
mutex_lock(&stmpe->lock);
ret = __stmpe_disable(stmpe, blocks);
mutex_unlock(&stmpe->lock);
return ret;
}
EXPORT_SYMBOL_GPL(stmpe_disable);
/**
* stmpe_reg_read() - read a single STMPE register
* @stmpe: Device to read from
* @reg: Register to read
*/
int stmpe_reg_read(struct stmpe *stmpe, u8 reg)
{
int ret;
mutex_lock(&stmpe->lock);
ret = __stmpe_reg_read(stmpe, reg);
mutex_unlock(&stmpe->lock);
return ret;
}
EXPORT_SYMBOL_GPL(stmpe_reg_read);
/**
* stmpe_reg_write() - write a single STMPE register
* @stmpe: Device to write to
* @reg: Register to write
* @val: Value to write
*/
int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
{
int ret;
mutex_lock(&stmpe->lock);
ret = __stmpe_reg_write(stmpe, reg, val);
mutex_unlock(&stmpe->lock);
return ret;
}
EXPORT_SYMBOL_GPL(stmpe_reg_write);
/**
* stmpe_set_bits() - set the value of a bitfield in a STMPE register
* @stmpe: Device to write to
* @reg: Register to write
* @mask: Mask of bits to set
* @val: Value to set
*/
int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
{
int ret;
mutex_lock(&stmpe->lock);
ret = __stmpe_set_bits(stmpe, reg, mask, val);
mutex_unlock(&stmpe->lock);
return ret;
}
EXPORT_SYMBOL_GPL(stmpe_set_bits);
/**
* stmpe_block_read() - read multiple STMPE registers
* @stmpe: Device to read from
* @reg: First register
* @length: Number of registers
* @values: Buffer to write to
*/
int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values)
{
int ret;
mutex_lock(&stmpe->lock);
ret = __stmpe_block_read(stmpe, reg, length, values);
mutex_unlock(&stmpe->lock);
return ret;
}
EXPORT_SYMBOL_GPL(stmpe_block_read);
/**
* stmpe_block_write() - write multiple STMPE registers
* @stmpe: Device to write to
* @reg: First register
* @length: Number of registers
* @values: Values to write
*/
int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
const u8 *values)
{
int ret;
mutex_lock(&stmpe->lock);
ret = __stmpe_block_write(stmpe, reg, length, values);
mutex_unlock(&stmpe->lock);
return ret;
}
EXPORT_SYMBOL_GPL(stmpe_block_write);
/**
* stmpe_set_altfunc: set the alternate function for STMPE pins
* @stmpe: Device to configure
* @pins: Bitmask of pins to affect
* @block: block to enable alternate functions for
*
* @pins is assumed to have a bit set for each of the bits whose alternate
* function is to be changed, numbered according to the GPIOXY numbers.
*
* If the GPIO module is not enabled, this function automatically enables it in
* order to perform the change.
*/
int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, enum stmpe_block block)
{
struct stmpe_variant_info *variant = stmpe->variant;
u8 regaddr = stmpe->regs[STMPE_IDX_GPAFR_U_MSB];
int af_bits = variant->af_bits;
int numregs = DIV_ROUND_UP(stmpe->num_gpios * af_bits, 8);
int afperreg = 8 / af_bits;
int mask = (1 << af_bits) - 1;
u8 regs[numregs];
int af;
int ret;
mutex_lock(&stmpe->lock);
ret = __stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
if (ret < 0)
goto out;
ret = __stmpe_block_read(stmpe, regaddr, numregs, regs);
if (ret < 0)
goto out;
af = variant->get_altfunc(stmpe, block);
while (pins) {
int pin = __ffs(pins);
int regoffset = numregs - (pin / afperreg) - 1;
int pos = (pin % afperreg) * (8 / afperreg);
regs[regoffset] &= ~(mask << pos);
regs[regoffset] |= af << pos;
pins &= ~(1 << pin);
}
ret = __stmpe_block_write(stmpe, regaddr, numregs, regs);
out:
mutex_unlock(&stmpe->lock);
return ret;
}
EXPORT_SYMBOL_GPL(stmpe_set_altfunc);
/*
* GPIO (all variants)
*/
static struct resource stmpe_gpio_resources[] = {
/* Start and end filled dynamically */
{
.flags = IORESOURCE_IRQ,
},
};
static struct mfd_cell stmpe_gpio_cell = {
.name = "stmpe-gpio",
.resources = stmpe_gpio_resources,
.num_resources = ARRAY_SIZE(stmpe_gpio_resources),
};
/*
* Keypad (1601, 2401, 2403)
*/
static struct resource stmpe_keypad_resources[] = {
{
.name = "KEYPAD",
.start = 0,
.end = 0,
.flags = IORESOURCE_IRQ,
},
{
.name = "KEYPAD_OVER",
.start = 1,
.end = 1,
.flags = IORESOURCE_IRQ,
},
};
static struct mfd_cell stmpe_keypad_cell = {
.name = "stmpe-keypad",
.resources = stmpe_keypad_resources,
.num_resources = ARRAY_SIZE(stmpe_keypad_resources),
};
/*
* Touchscreen (STMPE811)
*/
static struct resource stmpe_ts_resources[] = {
{
.name = "TOUCH_DET",
.start = 0,
.end = 0,
.flags = IORESOURCE_IRQ,
},
{
.name = "FIFO_TH",
.start = 1,
.end = 1,
.flags = IORESOURCE_IRQ,
},
};
static struct mfd_cell stmpe_ts_cell = {
.name = "stmpe-ts",
.resources = stmpe_ts_resources,
.num_resources = ARRAY_SIZE(stmpe_ts_resources),
};
/*
* STMPE811
*/
static const u8 stmpe811_regs[] = {
[STMPE_IDX_CHIP_ID] = STMPE811_REG_CHIP_ID,
[STMPE_IDX_ICR_LSB] = STMPE811_REG_INT_CTRL,
[STMPE_IDX_IER_LSB] = STMPE811_REG_INT_EN,
[STMPE_IDX_ISR_MSB] = STMPE811_REG_INT_STA,
[STMPE_IDX_GPMR_LSB] = STMPE811_REG_GPIO_MP_STA,
[STMPE_IDX_GPSR_LSB] = STMPE811_REG_GPIO_SET_PIN,
[STMPE_IDX_GPCR_LSB] = STMPE811_REG_GPIO_CLR_PIN,
[STMPE_IDX_GPDR_LSB] = STMPE811_REG_GPIO_DIR,
[STMPE_IDX_GPRER_LSB] = STMPE811_REG_GPIO_RE,
[STMPE_IDX_GPFER_LSB] = STMPE811_REG_GPIO_FE,
[STMPE_IDX_GPAFR_U_MSB] = STMPE811_REG_GPIO_AF,
[STMPE_IDX_IEGPIOR_LSB] = STMPE811_REG_GPIO_INT_EN,
[STMPE_IDX_ISGPIOR_MSB] = STMPE811_REG_GPIO_INT_STA,
[STMPE_IDX_GPEDR_MSB] = STMPE811_REG_GPIO_ED,
};
static struct stmpe_variant_block stmpe811_blocks[] = {
{
.cell = &stmpe_gpio_cell,
.irq = STMPE811_IRQ_GPIOC,
.block = STMPE_BLOCK_GPIO,
},
{
.cell = &stmpe_ts_cell,
.irq = STMPE811_IRQ_TOUCH_DET,
.block = STMPE_BLOCK_TOUCHSCREEN,
},
};
static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks,
bool enable)
{
unsigned int mask = 0;
if (blocks & STMPE_BLOCK_GPIO)
mask |= STMPE811_SYS_CTRL2_GPIO_OFF;
if (blocks & STMPE_BLOCK_ADC)
mask |= STMPE811_SYS_CTRL2_ADC_OFF;
if (blocks & STMPE_BLOCK_TOUCHSCREEN)
mask |= STMPE811_SYS_CTRL2_TSC_OFF;
return __stmpe_set_bits(stmpe, STMPE811_REG_SYS_CTRL2, mask,
enable ? 0 : mask);
}
static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
{
/* 0 for touchscreen, 1 for GPIO */
return block != STMPE_BLOCK_TOUCHSCREEN;
}
static struct stmpe_variant_info stmpe811 = {
.name = "stmpe811",
.id_val = 0x0811,
.id_mask = 0xffff,
.num_gpios = 8,
.af_bits = 1,
.regs = stmpe811_regs,
.blocks = stmpe811_blocks,
.num_blocks = ARRAY_SIZE(stmpe811_blocks),
.num_irqs = STMPE811_NR_INTERNAL_IRQS,
.enable = stmpe811_enable,
.get_altfunc = stmpe811_get_altfunc,
};
/*
* STMPE1601
*/
static const u8 stmpe1601_regs[] = {
[STMPE_IDX_CHIP_ID] = STMPE1601_REG_CHIP_ID,
[STMPE_IDX_ICR_LSB] = STMPE1601_REG_ICR_LSB,
[STMPE_IDX_IER_LSB] = STMPE1601_REG_IER_LSB,
[STMPE_IDX_ISR_MSB] = STMPE1601_REG_ISR_MSB,
[STMPE_IDX_GPMR_LSB] = STMPE1601_REG_GPIO_MP_LSB,
[STMPE_IDX_GPSR_LSB] = STMPE1601_REG_GPIO_SET_LSB,
[STMPE_IDX_GPCR_LSB] = STMPE1601_REG_GPIO_CLR_LSB,
[STMPE_IDX_GPDR_LSB] = STMPE1601_REG_GPIO_SET_DIR_LSB,
[STMPE_IDX_GPRER_LSB] = STMPE1601_REG_GPIO_RE_LSB,
[STMPE_IDX_GPFER_LSB] = STMPE1601_REG_GPIO_FE_LSB,
[STMPE_IDX_GPAFR_U_MSB] = STMPE1601_REG_GPIO_AF_U_MSB,
[STMPE_IDX_IEGPIOR_LSB] = STMPE1601_REG_INT_EN_GPIO_MASK_LSB,
[STMPE_IDX_ISGPIOR_MSB] = STMPE1601_REG_INT_STA_GPIO_MSB,
[STMPE_IDX_GPEDR_MSB] = STMPE1601_REG_GPIO_ED_MSB,
};
static struct stmpe_variant_block stmpe1601_blocks[] = {
{
.cell = &stmpe_gpio_cell,
.irq = STMPE24XX_IRQ_GPIOC,
.block = STMPE_BLOCK_GPIO,
},
{
.cell = &stmpe_keypad_cell,
.irq = STMPE24XX_IRQ_KEYPAD,
.block = STMPE_BLOCK_KEYPAD,
},
};
static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks,
bool enable)
{
unsigned int mask = 0;
if (blocks & STMPE_BLOCK_GPIO)
mask |= STMPE1601_SYS_CTRL_ENABLE_GPIO;
if (blocks & STMPE_BLOCK_KEYPAD)
mask |= STMPE1601_SYS_CTRL_ENABLE_KPC;
return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL, mask,
enable ? mask : 0);
}
static int stmpe1601_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
{
switch (block) {
case STMPE_BLOCK_PWM:
return 2;
case STMPE_BLOCK_KEYPAD:
return 1;
case STMPE_BLOCK_GPIO:
default:
return 0;
}
}
static struct stmpe_variant_info stmpe1601 = {
.name = "stmpe1601",
.id_val = 0x0210,
.id_mask = 0xfff0, /* at least 0x0210 and 0x0212 */
.num_gpios = 16,
.af_bits = 2,
.regs = stmpe1601_regs,
.blocks = stmpe1601_blocks,
.num_blocks = ARRAY_SIZE(stmpe1601_blocks),
.num_irqs = STMPE1601_NR_INTERNAL_IRQS,
.enable = stmpe1601_enable,
.get_altfunc = stmpe1601_get_altfunc,
};
/*
* STMPE24XX
*/
static const u8 stmpe24xx_regs[] = {
[STMPE_IDX_CHIP_ID] = STMPE24XX_REG_CHIP_ID,
[STMPE_IDX_ICR_LSB] = STMPE24XX_REG_ICR_LSB,
[STMPE_IDX_IER_LSB] = STMPE24XX_REG_IER_LSB,
[STMPE_IDX_ISR_MSB] = STMPE24XX_REG_ISR_MSB,
[STMPE_IDX_GPMR_LSB] = STMPE24XX_REG_GPMR_LSB,
[STMPE_IDX_GPSR_LSB] = STMPE24XX_REG_GPSR_LSB,
[STMPE_IDX_GPCR_LSB] = STMPE24XX_REG_GPCR_LSB,
[STMPE_IDX_GPDR_LSB] = STMPE24XX_REG_GPDR_LSB,
[STMPE_IDX_GPRER_LSB] = STMPE24XX_REG_GPRER_LSB,
[STMPE_IDX_GPFER_LSB] = STMPE24XX_REG_GPFER_LSB,
[STMPE_IDX_GPAFR_U_MSB] = STMPE24XX_REG_GPAFR_U_MSB,
[STMPE_IDX_IEGPIOR_LSB] = STMPE24XX_REG_IEGPIOR_LSB,
[STMPE_IDX_ISGPIOR_MSB] = STMPE24XX_REG_ISGPIOR_MSB,
[STMPE_IDX_GPEDR_MSB] = STMPE24XX_REG_GPEDR_MSB,
};
static struct stmpe_variant_block stmpe24xx_blocks[] = {
{
.cell = &stmpe_gpio_cell,
.irq = STMPE24XX_IRQ_GPIOC,
.block = STMPE_BLOCK_GPIO,
},
{
.cell = &stmpe_keypad_cell,
.irq = STMPE24XX_IRQ_KEYPAD,
.block = STMPE_BLOCK_KEYPAD,
},
};
static int stmpe24xx_enable(struct stmpe *stmpe, unsigned int blocks,
bool enable)
{
unsigned int mask = 0;
if (blocks & STMPE_BLOCK_GPIO)
mask |= STMPE24XX_SYS_CTRL_ENABLE_GPIO;
if (blocks & STMPE_BLOCK_KEYPAD)
mask |= STMPE24XX_SYS_CTRL_ENABLE_KPC;
return __stmpe_set_bits(stmpe, STMPE24XX_REG_SYS_CTRL, mask,
enable ? mask : 0);
}
static int stmpe24xx_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
{
switch (block) {
case STMPE_BLOCK_ROTATOR:
return 2;
case STMPE_BLOCK_KEYPAD:
return 1;
case STMPE_BLOCK_GPIO:
default:
return 0;
}
}
static struct stmpe_variant_info stmpe2401 = {
.name = "stmpe2401",
.id_val = 0x0101,
.id_mask = 0xffff,
.num_gpios = 24,
.af_bits = 2,
.regs = stmpe24xx_regs,
.blocks = stmpe24xx_blocks,
.num_blocks = ARRAY_SIZE(stmpe24xx_blocks),
.num_irqs = STMPE24XX_NR_INTERNAL_IRQS,
.enable = stmpe24xx_enable,
.get_altfunc = stmpe24xx_get_altfunc,
};
static struct stmpe_variant_info stmpe2403 = {
.name = "stmpe2403",
.id_val = 0x0120,
.id_mask = 0xffff,
.num_gpios = 24,
.af_bits = 2,
.regs = stmpe24xx_regs,
.blocks = stmpe24xx_blocks,
.num_blocks = ARRAY_SIZE(stmpe24xx_blocks),
.num_irqs = STMPE24XX_NR_INTERNAL_IRQS,
.enable = stmpe24xx_enable,
.get_altfunc = stmpe24xx_get_altfunc,
};
static struct stmpe_variant_info *stmpe_variant_info[] = {
[STMPE811] = &stmpe811,
[STMPE1601] = &stmpe1601,
[STMPE2401] = &stmpe2401,
[STMPE2403] = &stmpe2403,
};
static irqreturn_t stmpe_irq(int irq, void *data)
{
struct stmpe *stmpe = data;
struct stmpe_variant_info *variant = stmpe->variant;
int num = DIV_ROUND_UP(variant->num_irqs, 8);
u8 israddr = stmpe->regs[STMPE_IDX_ISR_MSB];
u8 isr[num];
int ret;
int i;
ret = stmpe_block_read(stmpe, israddr, num, isr);
if (ret < 0)
return IRQ_NONE;
for (i = 0; i < num; i++) {
int bank = num - i - 1;
u8 status = isr[i];
u8 clear;
status &= stmpe->ier[bank];
if (!status)
continue;
clear = status;
while (status) {
int bit = __ffs(status);
int line = bank * 8 + bit;
handle_nested_irq(stmpe->irq_base + line);
status &= ~(1 << bit);
}
stmpe_reg_write(stmpe, israddr + i, clear);
}
return IRQ_HANDLED;
}
static void stmpe_irq_lock(unsigned int irq)
{
struct stmpe *stmpe = get_irq_chip_data(irq);
mutex_lock(&stmpe->irq_lock);
}
static void stmpe_irq_sync_unlock(unsigned int irq)
{
struct stmpe *stmpe = get_irq_chip_data(irq);
struct stmpe_variant_info *variant = stmpe->variant;
int num = DIV_ROUND_UP(variant->num_irqs, 8);
int i;
for (i = 0; i < num; i++) {
u8 new = stmpe->ier[i];
u8 old = stmpe->oldier[i];
if (new == old)
continue;
stmpe->oldier[i] = new;
stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_IER_LSB] - i, new);
}
mutex_unlock(&stmpe->irq_lock);
}
static void stmpe_irq_mask(unsigned int irq)
{
struct stmpe *stmpe = get_irq_chip_data(irq);
int offset = irq - stmpe->irq_base;
int regoffset = offset / 8;
int mask = 1 << (offset % 8);
stmpe->ier[regoffset] &= ~mask;
}
static void stmpe_irq_unmask(unsigned int irq)
{
struct stmpe *stmpe = get_irq_chip_data(irq);
int offset = irq - stmpe->irq_base;
int regoffset = offset / 8;
int mask = 1 << (offset % 8);
stmpe->ier[regoffset] |= mask;
}
static struct irq_chip stmpe_irq_chip = {
.name = "stmpe",
.bus_lock = stmpe_irq_lock,
.bus_sync_unlock = stmpe_irq_sync_unlock,
.mask = stmpe_irq_mask,
.unmask = stmpe_irq_unmask,
};
static int __devinit stmpe_irq_init(struct stmpe *stmpe)
{
int num_irqs = stmpe->variant->num_irqs;
int base = stmpe->irq_base;
int irq;
for (irq = base; irq < base + num_irqs; irq++) {
set_irq_chip_data(irq, stmpe);
set_irq_chip_and_handler(irq, &stmpe_irq_chip,
handle_edge_irq);
set_irq_nested_thread(irq, 1);
#ifdef CONFIG_ARM
set_irq_flags(irq, IRQF_VALID);
#else
set_irq_noprobe(irq);
#endif
}
return 0;
}
static void stmpe_irq_remove(struct stmpe *stmpe)
{
int num_irqs = stmpe->variant->num_irqs;
int base = stmpe->irq_base;
int irq;
for (irq = base; irq < base + num_irqs; irq++) {
#ifdef CONFIG_ARM
set_irq_flags(irq, 0);
#endif
set_irq_chip_and_handler(irq, NULL, NULL);
set_irq_chip_data(irq, NULL);
}
}
static int __devinit stmpe_chip_init(struct stmpe *stmpe)
{
unsigned int irq_trigger = stmpe->pdata->irq_trigger;
struct stmpe_variant_info *variant = stmpe->variant;
u8 icr = STMPE_ICR_LSB_GIM;
unsigned int id;
u8 data[2];
int ret;
ret = stmpe_block_read(stmpe, stmpe->regs[STMPE_IDX_CHIP_ID],
ARRAY_SIZE(data), data);
if (ret < 0)
return ret;
id = (data[0] << 8) | data[1];
if ((id & variant->id_mask) != variant->id_val) {
dev_err(stmpe->dev, "unknown chip id: %#x\n", id);
return -EINVAL;
}
dev_info(stmpe->dev, "%s detected, chip id: %#x\n", variant->name, id);
/* Disable all modules -- subdrivers should enable what they need. */
ret = stmpe_disable(stmpe, ~0);
if (ret)
return ret;
if (irq_trigger == IRQF_TRIGGER_FALLING ||
irq_trigger == IRQF_TRIGGER_RISING)
icr |= STMPE_ICR_LSB_EDGE;
if (irq_trigger == IRQF_TRIGGER_RISING ||
irq_trigger == IRQF_TRIGGER_HIGH)
icr |= STMPE_ICR_LSB_HIGH;
if (stmpe->pdata->irq_invert_polarity)
icr ^= STMPE_ICR_LSB_HIGH;
return stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_ICR_LSB], icr);
}
static int __devinit stmpe_add_device(struct stmpe *stmpe,
struct mfd_cell *cell, int irq)
{
return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1,
NULL, stmpe->irq_base + irq);
}
static int __devinit stmpe_devices_init(struct stmpe *stmpe)
{
struct stmpe_variant_info *variant = stmpe->variant;
unsigned int platform_blocks = stmpe->pdata->blocks;
int ret = -EINVAL;
int i;
for (i = 0; i < variant->num_blocks; i++) {
struct stmpe_variant_block *block = &variant->blocks[i];
if (!(platform_blocks & block->block))
continue;
platform_blocks &= ~block->block;
ret = stmpe_add_device(stmpe, block->cell, block->irq);
if (ret)
return ret;
}
if (platform_blocks)
dev_warn(stmpe->dev,
"platform wants blocks (%#x) not present on variant",
platform_blocks);
return ret;
}
static int __devinit stmpe_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct stmpe_platform_data *pdata = i2c->dev.platform_data;
struct stmpe *stmpe;
int ret;
if (!pdata)
return -EINVAL;
stmpe = kzalloc(sizeof(struct stmpe), GFP_KERNEL);
if (!stmpe)
return -ENOMEM;
mutex_init(&stmpe->irq_lock);
mutex_init(&stmpe->lock);
stmpe->dev = &i2c->dev;
stmpe->i2c = i2c;
stmpe->pdata = pdata;
stmpe->irq_base = pdata->irq_base;
stmpe->partnum = id->driver_data;
stmpe->variant = stmpe_variant_info[stmpe->partnum];
stmpe->regs = stmpe->variant->regs;
stmpe->num_gpios = stmpe->variant->num_gpios;
i2c_set_clientdata(i2c, stmpe);
ret = stmpe_chip_init(stmpe);
if (ret)
goto out_free;
ret = stmpe_irq_init(stmpe);
if (ret)
goto out_free;
ret = request_threaded_irq(stmpe->i2c->irq, NULL, stmpe_irq,
pdata->irq_trigger | IRQF_ONESHOT,
"stmpe", stmpe);
if (ret) {
dev_err(stmpe->dev, "failed to request IRQ: %d\n", ret);
goto out_removeirq;
}
ret = stmpe_devices_init(stmpe);
if (ret) {
dev_err(stmpe->dev, "failed to add children\n");
goto out_removedevs;
}
return 0;
out_removedevs:
mfd_remove_devices(stmpe->dev);
free_irq(stmpe->i2c->irq, stmpe);
out_removeirq:
stmpe_irq_remove(stmpe);
out_free:
kfree(stmpe);
return ret;
}
static int __devexit stmpe_remove(struct i2c_client *client)
{
struct stmpe *stmpe = i2c_get_clientdata(client);
mfd_remove_devices(stmpe->dev);
free_irq(stmpe->i2c->irq, stmpe);
stmpe_irq_remove(stmpe);
kfree(stmpe);
return 0;
}
static const struct i2c_device_id stmpe_id[] = {
{ "stmpe811", STMPE811 },
{ "stmpe1601", STMPE1601 },
{ "stmpe2401", STMPE2401 },
{ "stmpe2403", STMPE2403 },
{ }
};
MODULE_DEVICE_TABLE(i2c, stmpe_id);
static struct i2c_driver stmpe_driver = {
.driver.name = "stmpe",
.driver.owner = THIS_MODULE,
.probe = stmpe_probe,
.remove = __devexit_p(stmpe_remove),
.id_table = stmpe_id,
};
static int __init stmpe_init(void)
{
return i2c_add_driver(&stmpe_driver);
}
subsys_initcall(stmpe_init);
static void __exit stmpe_exit(void)
{
i2c_del_driver(&stmpe_driver);
}
module_exit(stmpe_exit);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("STMPE MFD core driver");
MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>");

176
drivers/mfd/stmpe.h Normal file
View File

@ -0,0 +1,176 @@
/*
* Copyright (C) ST-Ericsson SA 2010
*
* License Terms: GNU General Public License, version 2
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
*/
#ifndef __STMPE_H
#define __STMPE_H
#ifdef STMPE_DUMP_BYTES
static inline void stmpe_dump_bytes(const char *str, const void *buf,
size_t len)
{
print_hex_dump_bytes(str, DUMP_PREFIX_OFFSET, buf, len);
}
#else
static inline void stmpe_dump_bytes(const char *str, const void *buf,
size_t len)
{
}
#endif
/**
* struct stmpe_variant_block - information about block
* @cell: base mfd cell
* @irq: interrupt number to be added to each IORESOURCE_IRQ
* in the cell
* @block: block id; used for identification with platform data and for
* enable and altfunc callbacks
*/
struct stmpe_variant_block {
struct mfd_cell *cell;
int irq;
enum stmpe_block block;
};
/**
* struct stmpe_variant_info - variant-specific information
* @name: part name
* @id_val: content of CHIPID register
* @id_mask: bits valid in CHIPID register for comparison with id_val
* @num_gpios: number of GPIOS
* @af_bits: number of bits used to specify the alternate function
* @blocks: list of blocks present on this device
* @num_blocks: number of blocks present on this device
* @num_irqs: number of internal IRQs available on this device
* @enable: callback to enable the specified blocks.
* Called with the I/O lock held.
* @get_altfunc: callback to get the alternate function number for the
* specific block
*/
struct stmpe_variant_info {
const char *name;
u16 id_val;
u16 id_mask;
int num_gpios;
int af_bits;
const u8 *regs;
struct stmpe_variant_block *blocks;
int num_blocks;
int num_irqs;
int (*enable)(struct stmpe *stmpe, unsigned int blocks, bool enable);
int (*get_altfunc)(struct stmpe *stmpe, enum stmpe_block block);
};
#define STMPE_ICR_LSB_HIGH (1 << 2)
#define STMPE_ICR_LSB_EDGE (1 << 1)
#define STMPE_ICR_LSB_GIM (1 << 0)
/*
* STMPE811
*/
#define STMPE811_IRQ_TOUCH_DET 0
#define STMPE811_IRQ_FIFO_TH 1
#define STMPE811_IRQ_FIFO_OFLOW 2
#define STMPE811_IRQ_FIFO_FULL 3
#define STMPE811_IRQ_FIFO_EMPTY 4
#define STMPE811_IRQ_TEMP_SENS 5
#define STMPE811_IRQ_ADC 6
#define STMPE811_IRQ_GPIOC 7
#define STMPE811_NR_INTERNAL_IRQS 8
#define STMPE811_REG_CHIP_ID 0x00
#define STMPE811_REG_SYS_CTRL2 0x04
#define STMPE811_REG_INT_CTRL 0x09
#define STMPE811_REG_INT_EN 0x0A
#define STMPE811_REG_INT_STA 0x0B
#define STMPE811_REG_GPIO_INT_EN 0x0C
#define STMPE811_REG_GPIO_INT_STA 0x0D
#define STMPE811_REG_GPIO_SET_PIN 0x10
#define STMPE811_REG_GPIO_CLR_PIN 0x11
#define STMPE811_REG_GPIO_MP_STA 0x12
#define STMPE811_REG_GPIO_DIR 0x13
#define STMPE811_REG_GPIO_ED 0x14
#define STMPE811_REG_GPIO_RE 0x15
#define STMPE811_REG_GPIO_FE 0x16
#define STMPE811_REG_GPIO_AF 0x17
#define STMPE811_SYS_CTRL2_ADC_OFF (1 << 0)
#define STMPE811_SYS_CTRL2_TSC_OFF (1 << 1)
#define STMPE811_SYS_CTRL2_GPIO_OFF (1 << 2)
#define STMPE811_SYS_CTRL2_TS_OFF (1 << 3)
/*
* STMPE1601
*/
#define STMPE1601_IRQ_GPIOC 8
#define STMPE1601_IRQ_PWM3 7
#define STMPE1601_IRQ_PWM2 6
#define STMPE1601_IRQ_PWM1 5
#define STMPE1601_IRQ_PWM0 4
#define STMPE1601_IRQ_KEYPAD_OVER 2
#define STMPE1601_IRQ_KEYPAD 1
#define STMPE1601_IRQ_WAKEUP 0
#define STMPE1601_NR_INTERNAL_IRQS 9
#define STMPE1601_REG_SYS_CTRL 0x02
#define STMPE1601_REG_ICR_LSB 0x11
#define STMPE1601_REG_IER_LSB 0x13
#define STMPE1601_REG_ISR_MSB 0x14
#define STMPE1601_REG_CHIP_ID 0x80
#define STMPE1601_REG_INT_EN_GPIO_MASK_LSB 0x17
#define STMPE1601_REG_INT_STA_GPIO_MSB 0x18
#define STMPE1601_REG_GPIO_MP_LSB 0x87
#define STMPE1601_REG_GPIO_SET_LSB 0x83
#define STMPE1601_REG_GPIO_CLR_LSB 0x85
#define STMPE1601_REG_GPIO_SET_DIR_LSB 0x89
#define STMPE1601_REG_GPIO_ED_MSB 0x8A
#define STMPE1601_REG_GPIO_RE_LSB 0x8D
#define STMPE1601_REG_GPIO_FE_LSB 0x8F
#define STMPE1601_REG_GPIO_AF_U_MSB 0x92
#define STMPE1601_SYS_CTRL_ENABLE_GPIO (1 << 3)
#define STMPE1601_SYS_CTRL_ENABLE_KPC (1 << 1)
#define STMPE1601_SYSCON_ENABLE_SPWM (1 << 0)
/*
* STMPE24xx
*/
#define STMPE24XX_IRQ_GPIOC 8
#define STMPE24XX_IRQ_PWM2 7
#define STMPE24XX_IRQ_PWM1 6
#define STMPE24XX_IRQ_PWM0 5
#define STMPE24XX_IRQ_ROT_OVER 4
#define STMPE24XX_IRQ_ROT 3
#define STMPE24XX_IRQ_KEYPAD_OVER 2
#define STMPE24XX_IRQ_KEYPAD 1
#define STMPE24XX_IRQ_WAKEUP 0
#define STMPE24XX_NR_INTERNAL_IRQS 9
#define STMPE24XX_REG_SYS_CTRL 0x02
#define STMPE24XX_REG_ICR_LSB 0x11
#define STMPE24XX_REG_IER_LSB 0x13
#define STMPE24XX_REG_ISR_MSB 0x14
#define STMPE24XX_REG_CHIP_ID 0x80
#define STMPE24XX_REG_IEGPIOR_LSB 0x18
#define STMPE24XX_REG_ISGPIOR_MSB 0x19
#define STMPE24XX_REG_GPMR_LSB 0xA5
#define STMPE24XX_REG_GPSR_LSB 0x85
#define STMPE24XX_REG_GPCR_LSB 0x88
#define STMPE24XX_REG_GPDR_LSB 0x8B
#define STMPE24XX_REG_GPEDR_MSB 0x8C
#define STMPE24XX_REG_GPRER_LSB 0x91
#define STMPE24XX_REG_GPFER_LSB 0x94
#define STMPE24XX_REG_GPAFR_U_MSB 0x9B
#define STMPE24XX_SYS_CTRL_ENABLE_GPIO (1 << 3)
#define STMPE24XX_SYSCON_ENABLE_PWM (1 << 2)
#define STMPE24XX_SYS_CTRL_ENABLE_KPC (1 << 1)
#define STMPE24XX_SYSCON_ENABLE_ROT (1 << 0)
#endif

197
include/linux/mfd/stmpe.h Normal file
View File

@ -0,0 +1,197 @@
/*
* Copyright (C) ST-Ericsson SA 2010
*
* License Terms: GNU General Public License, version 2
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
*/
#ifndef __LINUX_MFD_STMPE_H
#define __LINUX_MFD_STMPE_H
#include <linux/device.h>
enum stmpe_block {
STMPE_BLOCK_GPIO = 1 << 0,
STMPE_BLOCK_KEYPAD = 1 << 1,
STMPE_BLOCK_TOUCHSCREEN = 1 << 2,
STMPE_BLOCK_ADC = 1 << 3,
STMPE_BLOCK_PWM = 1 << 4,
STMPE_BLOCK_ROTATOR = 1 << 5,
};
enum stmpe_partnum {
STMPE811,
STMPE1601,
STMPE2401,
STMPE2403,
};
/*
* For registers whose locations differ on variants, the correct address is
* obtained by indexing stmpe->regs with one of the following.
*/
enum {
STMPE_IDX_CHIP_ID,
STMPE_IDX_ICR_LSB,
STMPE_IDX_IER_LSB,
STMPE_IDX_ISR_MSB,
STMPE_IDX_GPMR_LSB,
STMPE_IDX_GPSR_LSB,
STMPE_IDX_GPCR_LSB,
STMPE_IDX_GPDR_LSB,
STMPE_IDX_GPEDR_MSB,
STMPE_IDX_GPRER_LSB,
STMPE_IDX_GPFER_LSB,
STMPE_IDX_GPAFR_U_MSB,
STMPE_IDX_IEGPIOR_LSB,
STMPE_IDX_ISGPIOR_MSB,
STMPE_IDX_MAX,
};
struct stmpe_variant_info;
/**
* struct stmpe - STMPE MFD structure
* @lock: lock protecting I/O operations
* @irq_lock: IRQ bus lock
* @dev: device, mostly for dev_dbg()
* @i2c: i2c client
* @variant: the detected STMPE model number
* @regs: list of addresses of registers which are at different addresses on
* different variants. Indexed by one of STMPE_IDX_*.
* @irq_base: starting IRQ number for internal IRQs
* @num_gpios: number of gpios, differs for variants
* @ier: cache of IER registers for bus_lock
* @oldier: cache of IER registers for bus_lock
* @pdata: platform data
*/
struct stmpe {
struct mutex lock;
struct mutex irq_lock;
struct device *dev;
struct i2c_client *i2c;
enum stmpe_partnum partnum;
struct stmpe_variant_info *variant;
const u8 *regs;
int irq_base;
int num_gpios;
u8 ier[2];
u8 oldier[2];
struct stmpe_platform_data *pdata;
};
extern int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 data);
extern int stmpe_reg_read(struct stmpe *stmpe, u8 reg);
extern int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length,
u8 *values);
extern int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
const u8 *values);
extern int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val);
extern int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins,
enum stmpe_block block);
extern int stmpe_enable(struct stmpe *stmpe, unsigned int blocks);
extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
struct matrix_keymap_data;
/**
* struct stmpe_keypad_platform_data - STMPE keypad platform data
* @keymap_data: key map table and size
* @debounce_ms: debounce interval, in ms. Maximum is
* %STMPE_KEYPAD_MAX_DEBOUNCE.
* @scan_count: number of key scanning cycles to confirm key data.
* Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
* @no_autorepeat: disable key autorepeat
*/
struct stmpe_keypad_platform_data {
struct matrix_keymap_data *keymap_data;
unsigned int debounce_ms;
unsigned int scan_count;
bool no_autorepeat;
};
/**
* struct stmpe_gpio_platform_data - STMPE GPIO platform data
* @gpio_base: first gpio number assigned. A maximum of
* %STMPE_NR_GPIOS GPIOs will be allocated.
*/
struct stmpe_gpio_platform_data {
int gpio_base;
void (*setup)(struct stmpe *stmpe, unsigned gpio_base);
void (*remove)(struct stmpe *stmpe, unsigned gpio_base);
};
/**
* struct stmpe_ts_platform_data - stmpe811 touch screen controller platform
* data
* @sample_time: ADC converstion time in number of clock.
* (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks,
* 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks),
* recommended is 4.
* @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
* @ref_sel: ADC reference source
* (0 -> internal reference, 1 -> external reference)
* @adc_freq: ADC Clock speed
* (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
* @ave_ctrl: Sample average control
* (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples)
* @touch_det_delay: Touch detect interrupt delay
* (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us,
* 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms)
* recommended is 3
* @settling: Panel driver settling time
* (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms,
* 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms)
* recommended is 2
* @fraction_z: Length of the fractional part in z
* (fraction_z ([0..7]) = Count of the fractional part)
* recommended is 7
* @i_drive: current limit value of the touchscreen drivers
* (0 -> 20 mA typical 35 mA max, 1 -> 50 mA typical 80 mA max)
*
* */
struct stmpe_ts_platform_data {
u8 sample_time;
u8 mod_12b;
u8 ref_sel;
u8 adc_freq;
u8 ave_ctrl;
u8 touch_det_delay;
u8 settling;
u8 fraction_z;
u8 i_drive;
};
/**
* struct stmpe_platform_data - STMPE platform data
* @id: device id to distinguish between multiple STMPEs on the same board
* @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*)
* @irq_trigger: IRQ trigger to use for the interrupt to the host
* @irq_invert_polarity: IRQ line is connected with reversed polarity
* @irq_base: base IRQ number. %STMPE_NR_IRQS irqs will be used, or
* %STMPE_NR_INTERNAL_IRQS if the GPIO driver is not used.
* @gpio: GPIO-specific platform data
* @keypad: keypad-specific platform data
* @ts: touchscreen-specific platform data
*/
struct stmpe_platform_data {
int id;
unsigned int blocks;
int irq_base;
unsigned int irq_trigger;
bool irq_invert_polarity;
struct stmpe_gpio_platform_data *gpio;
struct stmpe_keypad_platform_data *keypad;
struct stmpe_ts_platform_data *ts;
};
#define STMPE_NR_INTERNAL_IRQS 9
#define STMPE_INT_GPIO(x) (STMPE_NR_INTERNAL_IRQS + (x))
#define STMPE_NR_GPIOS 24
#define STMPE_NR_IRQS STMPE_INT_GPIO(STMPE_NR_GPIOS)
#endif