dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

hwmon: (abituguru) Fix checkpatch issues 

Fixed:
ERROR: do not use assignment in if condition
ERROR: else should follow close brace '}'
ERROR: switch and case should be at the same indent
WARNING: simple_strtoul is obsolete, use kstrtoul instead

Modify multi-line comments to follow Documentation/CodingStyle.

Not fixed:
WARNING: msleep < 20ms can sleep for up to 20ms

Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Guenter Roeck 2012-01-14 12:30:52 -08:00 committed by Guenter Roeck
parent 8969e84d95
commit 1bd385d679
1 changed files with 359 additions and 223 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

582
drivers/hwmon/abituguru.c
View File

@ -1,25 +1,25 @@
/*
abituguru.c Copyright (c) 2005-2006 Hans de Goede <hdegoede@redhat.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
* abituguru.c Copyright (c) 2005-2006 Hans de Goede <hdegoede@redhat.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
This driver supports the sensor part of the first and second revision of
the custom Abit uGuru chip found on Abit uGuru motherboards. Note: because
of lack of specs the CPU/RAM voltage & frequency control is not supported!
*/
* This driver supports the sensor part of the first and second revision of
* the custom Abit uGuru chip found on Abit uGuru motherboards. Note: because
* of lack of specs the CPU/RAM voltage & frequency control is not supported!
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@ -44,8 +44,10 @@
#define ABIT_UGURU_SENSOR_BANK2 0x26 /* fans */
/* max nr of sensors in bank1, a bank1 sensor can be in, temp or nc */
#define ABIT_UGURU_MAX_BANK1_SENSORS 16
/* Warning if you increase one of the 2 MAX defines below to 10 or higher you
should adjust the belonging _NAMES_LENGTH macro for the 2 digit number! */
/*
* Warning if you increase one of the 2 MAX defines below to 10 or higher you
* should adjust the belonging _NAMES_LENGTH macro for the 2 digit number!
*/
/* max nr of sensors in bank2, currently mb's with max 6 fans are known */
#define ABIT_UGURU_MAX_BANK2_SENSORS 6
/* max nr of pwm outputs, currently mb's with max 5 pwm outputs are known */
@ -70,16 +72,22 @@
#define ABIT_UGURU_IN_SENSOR 0
#define ABIT_UGURU_TEMP_SENSOR 1
#define ABIT_UGURU_NC 2
/* In many cases we need to wait for the uGuru to reach a certain status, most
of the time it will reach this status within 30 - 90 ISA reads, and thus we
can best busy wait. This define gives the total amount of reads to try. */
/*
* In many cases we need to wait for the uGuru to reach a certain status, most
* of the time it will reach this status within 30 - 90 ISA reads, and thus we
* can best busy wait. This define gives the total amount of reads to try.
*/
#define ABIT_UGURU_WAIT_TIMEOUT 125
/* However sometimes older versions of the uGuru seem to be distracted and they
do not respond for a long time. To handle this we sleep before each of the
last ABIT_UGURU_WAIT_TIMEOUT_SLEEP tries. */
/*
* However sometimes older versions of the uGuru seem to be distracted and they
* do not respond for a long time. To handle this we sleep before each of the
* last ABIT_UGURU_WAIT_TIMEOUT_SLEEP tries.
*/
#define ABIT_UGURU_WAIT_TIMEOUT_SLEEP 5
/* Normally all expected status in abituguru_ready, are reported after the
first read, but sometimes not and we need to poll. */
/*
* Normally all expected status in abituguru_ready, are reported after the
* first read, but sometimes not and we need to poll.
*/
#define ABIT_UGURU_READY_TIMEOUT 5
/* Maximum 3 retries on timedout reads/writes, delay 200 ms before retrying */
#define ABIT_UGURU_MAX_RETRIES 3
@ -92,17 +100,25 @@
if (level <= verbose) \
printk(KERN_DEBUG ABIT_UGURU_NAME ": " format , ## arg)
/* Macros to help calculate the sysfs_names array length */
/* sum of strlen of: in??_input\0, in??_{min,max}\0, in??_{min,max}_alarm\0,
in??_{min,max}_alarm_enable\0, in??_beep\0, in??_shutdown\0 */
/*
* sum of strlen of: in??_input\0, in??_{min,max}\0, in??_{min,max}_alarm\0,
* in??_{min,max}_alarm_enable\0, in??_beep\0, in??_shutdown\0
*/
#define ABITUGURU_IN_NAMES_LENGTH (11 + 2 * 9 + 2 * 15 + 2 * 22 + 10 + 14)
/* sum of strlen of: temp??_input\0, temp??_max\0, temp??_crit\0,
temp??_alarm\0, temp??_alarm_enable\0, temp??_beep\0, temp??_shutdown\0 */
/*
* sum of strlen of: temp??_input\0, temp??_max\0, temp??_crit\0,
* temp??_alarm\0, temp??_alarm_enable\0, temp??_beep\0, temp??_shutdown\0
*/
#define ABITUGURU_TEMP_NAMES_LENGTH (13 + 11 + 12 + 13 + 20 + 12 + 16)
/* sum of strlen of: fan?_input\0, fan?_min\0, fan?_alarm\0,
fan?_alarm_enable\0, fan?_beep\0, fan?_shutdown\0 */
/*
* sum of strlen of: fan?_input\0, fan?_min\0, fan?_alarm\0,
* fan?_alarm_enable\0, fan?_beep\0, fan?_shutdown\0
*/
#define ABITUGURU_FAN_NAMES_LENGTH (11 + 9 + 11 + 18 + 10 + 14)
/* sum of strlen of: pwm?_enable\0, pwm?_auto_channels_temp\0,
pwm?_auto_point{1,2}_pwm\0, pwm?_auto_point{1,2}_temp\0 */
/*
* sum of strlen of: pwm?_enable\0, pwm?_auto_channels_temp\0,
* pwm?_auto_point{1,2}_pwm\0, pwm?_auto_point{1,2}_temp\0
*/
#define ABITUGURU_PWM_NAMES_LENGTH (12 + 24 + 2 * 21 + 2 * 22)
/* IN_NAMES_LENGTH > TEMP_NAMES_LENGTH so assume all bank1 sensors are in */
#define ABITUGURU_SYSFS_NAMES_LENGTH ( \
@ -110,10 +126,12 @@
ABIT_UGURU_MAX_BANK2_SENSORS * ABITUGURU_FAN_NAMES_LENGTH + \
ABIT_UGURU_MAX_PWMS * ABITUGURU_PWM_NAMES_LENGTH)
/* All the macros below are named identical to the oguru and oguru2 programs
reverse engineered by Olle Sandberg, hence the names might not be 100%
logical. I could come up with better names, but I prefer keeping the names
identical so that this driver can be compared with his work more easily. */
/*
* All the macros below are named identical to the oguru and oguru2 programs
* reverse engineered by Olle Sandberg, hence the names might not be 100%
* logical. I could come up with better names, but I prefer keeping the names
* identical so that this driver can be compared with his work more easily.
*/
/* Two i/o-ports are used by uGuru */
#define ABIT_UGURU_BASE 0x00E0
/* Used to tell uGuru what to read and to read the actual data */
@ -130,16 +148,22 @@
/* Constants */
/* in (Volt) sensors go up to 3494 mV, temp to 255000 millidegrees Celsius */
static const int abituguru_bank1_max_value[2] = { 3494, 255000 };
/* Min / Max allowed values for sensor2 (fan) alarm threshold, these values
correspond to 300-3000 RPM */
/*
* Min / Max allowed values for sensor2 (fan) alarm threshold, these values
* correspond to 300-3000 RPM
*/
static const u8 abituguru_bank2_min_threshold = 5;
static const u8 abituguru_bank2_max_threshold = 50;
/* Register 0 is a bitfield, 1 and 2 are pwm settings (255 = 100%), 3 and 4
are temperature trip points. */
/*
* Register 0 is a bitfield, 1 and 2 are pwm settings (255 = 100%), 3 and 4
* are temperature trip points.
*/
static const int abituguru_pwm_settings_multiplier[5] = { 0, 1, 1, 1000, 1000 };
/* Min / Max allowed values for pwm_settings. Note: pwm1 (CPU fan) is a
special case the minium allowed pwm% setting for this is 30% (77) on
some MB's this special case is handled in the code! */
/*
* Min / Max allowed values for pwm_settings. Note: pwm1 (CPU fan) is a
* special case the minium allowed pwm% setting for this is 30% (77) on
* some MB's this special case is handled in the code!
*/
static const u8 abituguru_pwm_min[5] = { 0, 170, 170, 25, 25 };
static const u8 abituguru_pwm_max[5] = { 0, 255, 255, 75, 75 };
@ -175,23 +199,29 @@ MODULE_PARM_DESC(verbose, "How verbose should the driver be? (0-3):\n"
" 3 + retryable error reporting");
/* For the Abit uGuru, we need to keep some data in memory.
The structure is dynamically allocated, at the same time when a new
abituguru device is allocated. */
/*
* For the Abit uGuru, we need to keep some data in memory.
* The structure is dynamically allocated, at the same time when a new
* abituguru device is allocated.
*/
struct abituguru_data {
struct device *hwmon_dev; /* hwmon registered device */
struct mutex update_lock; /* protect access to data and uGuru */
unsigned long last_updated; /* In jiffies */
unsigned short addr; /* uguru base address */
char uguru_ready; /* is the uguru in ready state? */
unsigned char update_timeouts; /* number of update timeouts since last
successful update */
unsigned char update_timeouts; /*
* number of update timeouts since last
* successful update
*/
/* The sysfs attr and their names are generated automatically, for bank1
we cannot use a predefined array because we don't know beforehand
of a sensor is a volt or a temp sensor, for bank2 and the pwms its
easier todo things the same way. For in sensors we have 9 (temp 7)
sysfs entries per sensor, for bank2 and pwms 6. */
/*
* The sysfs attr and their names are generated automatically, for bank1
* we cannot use a predefined array because we don't know beforehand
* of a sensor is a volt or a temp sensor, for bank2 and the pwms its
* easier todo things the same way. For in sensors we have 9 (temp 7)
* sysfs entries per sensor, for bank2 and pwms 6.
*/
struct sensor_device_attribute_2 sysfs_attr[
ABIT_UGURU_MAX_BANK1_SENSORS * 9 +
ABIT_UGURU_MAX_BANK2_SENSORS * 6 + ABIT_UGURU_MAX_PWMS * 6];
@ -203,11 +233,15 @@ struct abituguru_data {
u8 bank1_sensors[2];
u8 bank1_address[2][ABIT_UGURU_MAX_BANK1_SENSORS];
u8 bank1_value[ABIT_UGURU_MAX_BANK1_SENSORS];
/* This array holds 3 entries per sensor for the bank 1 sensor settings
(flags, min, max for voltage / flags, warn, shutdown for temp). */
/*
* This array holds 3 entries per sensor for the bank 1 sensor settings
* (flags, min, max for voltage / flags, warn, shutdown for temp).
*/
u8 bank1_settings[ABIT_UGURU_MAX_BANK1_SENSORS][3];
/* Maximum value for each sensor used for scaling in mV/millidegrees
Celsius. */
/*
* Maximum value for each sensor used for scaling in mV/millidegrees
* Celsius.
*/
int bank1_max_value[ABIT_UGURU_MAX_BANK1_SENSORS];
/* Bank 2 data, ABIT_UGURU_MAX_BANK2_SENSORS entries for bank2 */
@ -236,8 +270,10 @@ static int abituguru_wait(struct abituguru_data *data, u8 state)
timeout--;
if (timeout == 0)
return -EBUSY;
/* sleep a bit before our last few tries, see the comment on
this where ABIT_UGURU_WAIT_TIMEOUT_SLEEP is defined. */
/*
* sleep a bit before our last few tries, see the comment on
* this where ABIT_UGURU_WAIT_TIMEOUT_SLEEP is defined.
*/
if (timeout <= ABIT_UGURU_WAIT_TIMEOUT_SLEEP)
msleep(0);
}
@ -273,8 +309,10 @@ static int abituguru_ready(struct abituguru_data *data)
msleep(0);
}
/* After this the ABIT_UGURU_DATA port should contain
ABIT_UGURU_STATUS_INPUT */
/*
* After this the ABIT_UGURU_DATA port should contain
* ABIT_UGURU_STATUS_INPUT
*/
timeout = ABIT_UGURU_READY_TIMEOUT;
while (inb_p(data->addr + ABIT_UGURU_DATA) != ABIT_UGURU_STATUS_INPUT) {
timeout--;
@ -290,27 +328,35 @@ static int abituguru_ready(struct abituguru_data *data)
return 0;
}
/* Send the bank and then sensor address to the uGuru for the next read/write
cycle. This function gets called as the first part of a read/write by
abituguru_read and abituguru_write. This function should never be
called by any other function. */
/*
* Send the bank and then sensor address to the uGuru for the next read/write
* cycle. This function gets called as the first part of a read/write by
* abituguru_read and abituguru_write. This function should never be
* called by any other function.
*/
static int abituguru_send_address(struct abituguru_data *data,
u8 bank_addr, u8 sensor_addr, int retries)
{
/* assume the caller does error handling itself if it has not requested
any retries, and thus be quiet. */
/*
* assume the caller does error handling itself if it has not requested
* any retries, and thus be quiet.
*/
int report_errors = retries;
for (;;) {
/* Make sure the uguru is ready and then send the bank address,
after this the uguru is no longer "ready". */
/*
* Make sure the uguru is ready and then send the bank address,
* after this the uguru is no longer "ready".
*/
if (abituguru_ready(data) != 0)
return -EIO;
outb(bank_addr, data->addr + ABIT_UGURU_DATA);
data->uguru_ready = 0;
/* Wait till the uguru is ABIT_UGURU_STATUS_INPUT state again
and send the sensor addr */
/*
* Wait till the uguru is ABIT_UGURU_STATUS_INPUT state again
* and send the sensor addr
*/
if (abituguru_wait(data, ABIT_UGURU_STATUS_INPUT)) {
if (retries) {
ABIT_UGURU_DEBUG(3, "timeout exceeded "
@ -332,8 +378,10 @@ static int abituguru_send_address(struct abituguru_data *data,
}
}
/* Read count bytes from sensor sensor_addr in bank bank_addr and store the
result in buf, retry the send address part of the read retries times. */
/*
* Read count bytes from sensor sensor_addr in bank bank_addr and store the
* result in buf, retry the send address part of the read retries times.
*/
static int abituguru_read(struct abituguru_data *data,
u8 bank_addr, u8 sensor_addr, u8 *buf, int count, int retries)
{
@ -362,13 +410,17 @@ static int abituguru_read(struct abituguru_data *data,
return i;
}
/* Write count bytes from buf to sensor sensor_addr in bank bank_addr, the send
address part of the write is always retried ABIT_UGURU_MAX_RETRIES times. */
/*
* Write count bytes from buf to sensor sensor_addr in bank bank_addr, the send
* address part of the write is always retried ABIT_UGURU_MAX_RETRIES times.
*/
static int abituguru_write(struct abituguru_data *data,
u8 bank_addr, u8 sensor_addr, u8 *buf, int count)
{
/* We use the ready timeout as we have to wait for 0xAC just like the
ready function */
/*
* We use the ready timeout as we have to wait for 0xAC just like the
* ready function
*/
int i, timeout = ABIT_UGURU_READY_TIMEOUT;
/* Send the address */
@ -388,9 +440,11 @@ static int abituguru_write(struct abituguru_data *data,
outb(buf[i], data->addr + ABIT_UGURU_CMD);
}
/* Now we need to wait till the chip is ready to be read again,
so that we can read 0xAC as confirmation that our write has
succeeded. */
/*
* Now we need to wait till the chip is ready to be read again,
* so that we can read 0xAC as confirmation that our write has
* succeeded.
*/
if (abituguru_wait(data, ABIT_UGURU_STATUS_READ)) {
ABIT_UGURU_DEBUG(1, "timeout exceeded waiting for read state "
"after write (bank: %d, sensor: %d)\n", (int)bank_addr,
@ -416,12 +470,14 @@ static int abituguru_write(struct abituguru_data *data,
return i;
}
/* Detect sensor type. Temp and Volt sensors are enabled with
different masks and will ignore enable masks not meant for them.
This enables us to test what kind of sensor we're dealing with.
By setting the alarm thresholds so that we will always get an
alarm for sensor type X and then enabling the sensor as sensor type
X, if we then get an alarm it is a sensor of type X. */
/*
* Detect sensor type. Temp and Volt sensors are enabled with
* different masks and will ignore enable masks not meant for them.
* This enables us to test what kind of sensor we're dealing with.
* By setting the alarm thresholds so that we will always get an
* alarm for sensor type X and then enabling the sensor as sensor type
* X, if we then get an alarm it is a sensor of type X.
*/
static int __devinit
abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
u8 sensor_addr)
@ -448,16 +504,20 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
pr_warn("bank1-sensor: %d reading (%d) too close to limits, "
"unable to determine sensor type, skipping sensor\n",
(int)sensor_addr, (int)val);
/* assume no sensor is there for sensors for which we can't
determine the sensor type because their reading is too close
to their limits, this usually means no sensor is there. */
/*
* assume no sensor is there for sensors for which we can't
* determine the sensor type because their reading is too close
* to their limits, this usually means no sensor is there.
*/
return ABIT_UGURU_NC;
}
ABIT_UGURU_DEBUG(2, "testing bank1 sensor %d\n", (int)sensor_addr);
/* Volt sensor test, enable volt low alarm, set min value ridicously
high, or vica versa if the reading is very high. If its a volt
sensor this should always give us an alarm. */
/*
* Volt sensor test, enable volt low alarm, set min value ridicously
* high, or vica versa if the reading is very high. If its a volt
* sensor this should always give us an alarm.
*/
if (val <= 240u) {
buf[0] = ABIT_UGURU_VOLT_LOW_ALARM_ENABLE;
buf[1] = 245;
@ -473,8 +533,10 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, sensor_addr,
buf, 3) != 3)
goto abituguru_detect_bank1_sensor_type_exit;
/* Now we need 20 ms to give the uguru time to read the sensors
and raise a voltage alarm */
/*
* Now we need 20 ms to give the uguru time to read the sensors
* and raise a voltage alarm
*/
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(HZ/50);
/* Check for alarm and check the alarm is a volt low alarm. */
@ -497,17 +559,21 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
ABIT_UGURU_DEBUG(2, " alarm not raised during volt sensor "
"test\n");
/* Temp sensor test, enable sensor as a temp sensor, set beep value
ridicously low (but not too low, otherwise uguru ignores it).
If its a temp sensor this should always give us an alarm. */
/*
* Temp sensor test, enable sensor as a temp sensor, set beep value
* ridicously low (but not too low, otherwise uguru ignores it).
* If its a temp sensor this should always give us an alarm.
*/
buf[0] = ABIT_UGURU_TEMP_HIGH_ALARM_ENABLE;
buf[1] = 5;
buf[2] = 10;
if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, sensor_addr,
buf, 3) != 3)
goto abituguru_detect_bank1_sensor_type_exit;
/* Now we need 50 ms to give the uguru time to read the sensors
and raise a temp alarm */
/*
* Now we need 50 ms to give the uguru time to read the sensors
* and raise a temp alarm
*/
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(HZ/20);
/* Check for alarm and check the alarm is a temp high alarm. */
@ -532,9 +598,11 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
ret = ABIT_UGURU_NC;
abituguru_detect_bank1_sensor_type_exit:
/* Restore original settings, failing here is really BAD, it has been
reported that some BIOS-es hang when entering the uGuru menu with
invalid settings present in the uGuru, so we try this 3 times. */
/*
* Restore original settings, failing here is really BAD, it has been
* reported that some BIOS-es hang when entering the uGuru menu with
* invalid settings present in the uGuru, so we try this 3 times.
*/
for (i = 0; i < 3; i++)
if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2,
sensor_addr, data->bank1_settings[sensor_addr],
@ -548,23 +616,25 @@ abituguru_detect_bank1_sensor_type_exit:
return ret;
}
/* These functions try to find out how many sensors there are in bank2 and how
many pwms there are. The purpose of this is to make sure that we don't give
the user the possibility to change settings for non-existent sensors / pwm.
The uGuru will happily read / write whatever memory happens to be after the
memory storing the PWM settings when reading/writing to a PWM which is not
there. Notice even if we detect a PWM which doesn't exist we normally won't
write to it, unless the user tries to change the settings.
Although the uGuru allows reading (settings) from non existing bank2
sensors, my version of the uGuru does seem to stop writing to them, the
write function above aborts in this case with:
"CMD reg does not hold 0xAC after write"
Notice these 2 tests are non destructive iow read-only tests, otherwise
they would defeat their purpose. Although for the bank2_sensors detection a
read/write test would be feasible because of the reaction above, I've
however opted to stay on the safe side. */
/*
* These functions try to find out how many sensors there are in bank2 and how
* many pwms there are. The purpose of this is to make sure that we don't give
* the user the possibility to change settings for non-existent sensors / pwm.
* The uGuru will happily read / write whatever memory happens to be after the
* memory storing the PWM settings when reading/writing to a PWM which is not
* there. Notice even if we detect a PWM which doesn't exist we normally won't
* write to it, unless the user tries to change the settings.
*
* Although the uGuru allows reading (settings) from non existing bank2
* sensors, my version of the uGuru does seem to stop writing to them, the
* write function above aborts in this case with:
* "CMD reg does not hold 0xAC after write"
*
* Notice these 2 tests are non destructive iow read-only tests, otherwise
* they would defeat their purpose. Although for the bank2_sensors detection a
* read/write test would be feasible because of the reaction above, I've
* however opted to stay on the safe side.
*/
static void __devinit
abituguru_detect_no_bank2_sensors(struct abituguru_data *data)
{
@ -580,12 +650,14 @@ abituguru_detect_no_bank2_sensors(struct abituguru_data *data)
ABIT_UGURU_DEBUG(2, "detecting number of fan sensors\n");
for (i = 0; i < ABIT_UGURU_MAX_BANK2_SENSORS; i++) {
/* 0x89 are the known used bits:
-0x80 enable shutdown
-0x08 enable beep
-0x01 enable alarm
All other bits should be 0, but on some motherboards
0x40 (bit 6) is also high for some of the fans?? */
/*
* 0x89 are the known used bits:
* -0x80 enable shutdown
* -0x08 enable beep
* -0x01 enable alarm
* All other bits should be 0, but on some motherboards
* 0x40 (bit 6) is also high for some of the fans??
*/
if (data->bank2_settings[i][0] & ~0xC9) {
ABIT_UGURU_DEBUG(2, " bank2 sensor %d does not seem "
"to be a fan sensor: settings[0] = %02X\n",
@ -633,9 +705,11 @@ abituguru_detect_no_pwms(struct abituguru_data *data)
ABIT_UGURU_DEBUG(2, "detecting number of PWM outputs\n");
for (i = 0; i < ABIT_UGURU_MAX_PWMS; i++) {
/* 0x80 is the enable bit and the low
nibble is which temp sensor to use,
the other bits should be 0 */
/*
* 0x80 is the enable bit and the low
* nibble is which temp sensor to use,
* the other bits should be 0
*/
if (data->pwm_settings[i][0] & ~0x8F) {
ABIT_UGURU_DEBUG(2, " pwm channel %d does not seem "
"to be a pwm channel: settings[0] = %02X\n",
@ -643,8 +717,10 @@ abituguru_detect_no_pwms(struct abituguru_data *data)
break;
}
/* the low nibble must correspond to one of the temp sensors
we've found */
/*
* the low nibble must correspond to one of the temp sensors
* we've found
*/
for (j = 0; j < data->bank1_sensors[ABIT_UGURU_TEMP_SENSOR];
j++) {
if (data->bank1_address[ABIT_UGURU_TEMP_SENSOR][j] ==
@ -711,9 +787,11 @@ abituguru_detect_no_pwms_exit:
ABIT_UGURU_DEBUG(2, " found: %d PWM outputs\n", (int)data->pwms);
}
/* Following are the sysfs callback functions. These functions expect:
sensor_device_attribute_2->index: sensor address/offset in the bank
sensor_device_attribute_2->nr: register offset, bitmask or NA. */
/*
* Following are the sysfs callback functions. These functions expect:
* sensor_device_attribute_2->index: sensor address/offset in the bank
* sensor_device_attribute_2->nr: register offset, bitmask or NA.
*/
static struct abituguru_data *abituguru_update_device(struct device *dev);
static ssize_t show_bank1_value(struct device *dev,
@ -763,10 +841,18 @@ static ssize_t store_bank1_setting(struct device *dev, struct device_attribute
{
struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
struct abituguru_data *data = dev_get_drvdata(dev);
u8 val = (simple_strtoul(buf, NULL, 10) * 255 +
data->bank1_max_value[attr->index]/2) /
unsigned long val;
ssize_t ret;
ret = kstrtoul(buf, 10, &val);
if (ret)
return ret;
ret = count;
val = (val * 255 + data->bank1_max_value[attr->index] / 2) /
data->bank1_max_value[attr->index];
ssize_t ret = count;
if (val > 255)
return -EINVAL;
mutex_lock(&data->update_lock);
if (data->bank1_settings[attr->index][attr->nr] != val) {
@ -788,13 +874,19 @@ static ssize_t store_bank2_setting(struct device *dev, struct device_attribute
{
struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
struct abituguru_data *data = dev_get_drvdata(dev);
u8 val = (simple_strtoul(buf, NULL, 10)*255 + ABIT_UGURU_FAN_MAX/2) /
ABIT_UGURU_FAN_MAX;
ssize_t ret = count;
unsigned long val;
ssize_t ret;
ret = kstrtoul(buf, 10, &val);
if (ret)
return ret;
ret = count;
val = (val * 255 + ABIT_UGURU_FAN_MAX / 2) / ABIT_UGURU_FAN_MAX;
/* this check can be done before taking the lock */
if ((val < abituguru_bank2_min_threshold) ||
(val > abituguru_bank2_max_threshold))
if (val < abituguru_bank2_min_threshold ||
val > abituguru_bank2_max_threshold)
return -EINVAL;
mutex_lock(&data->update_lock);
@ -819,11 +911,13 @@ static ssize_t show_bank1_alarm(struct device *dev,
struct abituguru_data *data = abituguru_update_device(dev);
if (!data)
return -EIO;
/* See if the alarm bit for this sensor is set, and if the
alarm matches the type of alarm we're looking for (for volt
it can be either low or high). The type is stored in a few
readonly bits in the settings part of the relevant sensor.
The bitmask of the type is passed to us in attr->nr. */
/*
* See if the alarm bit for this sensor is set, and if the
* alarm matches the type of alarm we're looking for (for volt
* it can be either low or high). The type is stored in a few
* readonly bits in the settings part of the relevant sensor.
* The bitmask of the type is passed to us in attr->nr.
*/
if ((data->alarms[attr->index / 8] & (0x01 << (attr->index % 8))) &&
(data->bank1_settings[attr->index][0] & attr->nr))
return sprintf(buf, "1\n");
@ -871,10 +965,15 @@ static ssize_t store_bank1_mask(struct device *dev,
{
struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
struct abituguru_data *data = dev_get_drvdata(dev);
int mask = simple_strtoul(buf, NULL, 10);
ssize_t ret = count;
ssize_t ret;
u8 orig_val;
unsigned long mask;
ret = kstrtoul(buf, 10, &mask);
if (ret)
return ret;
ret = count;
mutex_lock(&data->update_lock);
orig_val = data->bank1_settings[attr->index][0];
@ -899,10 +998,15 @@ static ssize_t store_bank2_mask(struct device *dev,
{
struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
struct abituguru_data *data = dev_get_drvdata(dev);
int mask = simple_strtoul(buf, NULL, 10);
ssize_t ret = count;
ssize_t ret;
u8 orig_val;
unsigned long mask;
ret = kstrtoul(buf, 10, &mask);
if (ret)
return ret;
ret = count;
mutex_lock(&data->update_lock);
orig_val = data->bank2_settings[attr->index][0];
@ -937,10 +1041,17 @@ static ssize_t store_pwm_setting(struct device *dev, struct device_attribute
{
struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
struct abituguru_data *data = dev_get_drvdata(dev);
u8 min, val = (simple_strtoul(buf, NULL, 10) +
abituguru_pwm_settings_multiplier[attr->nr]/2) /
abituguru_pwm_settings_multiplier[attr->nr];
ssize_t ret = count;
u8 min;
unsigned long val;
ssize_t ret;
ret = kstrtoul(buf, 10, &val);
if (ret)
return ret;
ret = count;
val = (val + abituguru_pwm_settings_multiplier[attr->nr] / 2) /
abituguru_pwm_settings_multiplier[attr->nr];
/* special case pwm1 min pwm% */
if ((attr->index == 0) && ((attr->nr == 1) || (attr->nr == 2)))
@ -949,7 +1060,7 @@ static ssize_t store_pwm_setting(struct device *dev, struct device_attribute
min = abituguru_pwm_min[attr->nr];
/* this check can be done before taking the lock */
if ((val < min) || (val > abituguru_pwm_max[attr->nr]))
if (val < min || val > abituguru_pwm_max[attr->nr])
return -EINVAL;
mutex_lock(&data->update_lock);
@ -981,8 +1092,10 @@ static ssize_t show_pwm_sensor(struct device *dev,
struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
struct abituguru_data *data = dev_get_drvdata(dev);
int i;
/* We need to walk to the temp sensor addresses to find what
the userspace id of the configured temp sensor is. */
/*
* We need to walk to the temp sensor addresses to find what
* the userspace id of the configured temp sensor is.
*/
for (i = 0; i < data->bank1_sensors[ABIT_UGURU_TEMP_SENSOR]; i++)
if (data->bank1_address[ABIT_UGURU_TEMP_SENSOR][i] ==
(data->pwm_settings[attr->index][0] & 0x0F))
@ -996,27 +1109,32 @@ static ssize_t store_pwm_sensor(struct device *dev, struct device_attribute
{
struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
struct abituguru_data *data = dev_get_drvdata(dev);
unsigned long val = simple_strtoul(buf, NULL, 10) - 1;
ssize_t ret = count;
ssize_t ret;
unsigned long val;
u8 orig_val;
u8 address;
ret = kstrtoul(buf, 10, &val);
if (ret)
return ret;
if (val == 0 || val > data->bank1_sensors[ABIT_UGURU_TEMP_SENSOR])
return -EINVAL;
val -= 1;
ret = count;
mutex_lock(&data->update_lock);
if (val < data->bank1_sensors[ABIT_UGURU_TEMP_SENSOR]) {
u8 orig_val = data->pwm_settings[attr->index][0];
u8 address = data->bank1_address[ABIT_UGURU_TEMP_SENSOR][val];
data->pwm_settings[attr->index][0] &= 0xF0;
data->pwm_settings[attr->index][0] |= address;
if (data->pwm_settings[attr->index][0] != orig_val) {
if (abituguru_write(data, ABIT_UGURU_FAN_PWM + 1,
attr->index,
data->pwm_settings[attr->index],
5) < 1) {
data->pwm_settings[attr->index][0] = orig_val;
ret = -EIO;
}
orig_val = data->pwm_settings[attr->index][0];
address = data->bank1_address[ABIT_UGURU_TEMP_SENSOR][val];
data->pwm_settings[attr->index][0] &= 0xF0;
data->pwm_settings[attr->index][0] |= address;
if (data->pwm_settings[attr->index][0] != orig_val) {
if (abituguru_write(data, ABIT_UGURU_FAN_PWM + 1, attr->index,
data->pwm_settings[attr->index], 5) < 1) {
data->pwm_settings[attr->index][0] = orig_val;
ret = -EIO;
}
}
else
ret = -EINVAL;
mutex_unlock(&data->update_lock);
return ret;
}
@ -1037,22 +1155,27 @@ static ssize_t store_pwm_enable(struct device *dev, struct device_attribute
{
struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
struct abituguru_data *data = dev_get_drvdata(dev);
u8 orig_val, user_val = simple_strtoul(buf, NULL, 10);
ssize_t ret = count;
u8 orig_val;
ssize_t ret;
unsigned long user_val;
ret = kstrtoul(buf, 10, &user_val);
if (ret)
return ret;
ret = count;
mutex_lock(&data->update_lock);
orig_val = data->pwm_settings[attr->index][0];
switch (user_val) {
case 0:
data->pwm_settings[attr->index][0] &=
~ABIT_UGURU_FAN_PWM_ENABLE;
break;
case 2:
data->pwm_settings[attr->index][0] |=
ABIT_UGURU_FAN_PWM_ENABLE;
break;
default:
ret = -EINVAL;
case 0:
data->pwm_settings[attr->index][0] &=
~ABIT_UGURU_FAN_PWM_ENABLE;
break;
case 2:
data->pwm_settings[attr->index][0] |= ABIT_UGURU_FAN_PWM_ENABLE;
break;
default:
ret = -EINVAL;
}
if ((data->pwm_settings[attr->index][0] != orig_val) &&
(abituguru_write(data, ABIT_UGURU_FAN_PWM + 1,
@ -1147,13 +1270,16 @@ static int __devinit abituguru_probe(struct platform_device *pdev)
int i, j, used, sysfs_names_free, sysfs_attr_i, res = -ENODEV;
char *sysfs_filename;
/* El weirdo probe order, to keep the sysfs order identical to the
BIOS and window-appliction listing order. */
/*
* El weirdo probe order, to keep the sysfs order identical to the
* BIOS and window-appliction listing order.
*/
const u8 probe_order[ABIT_UGURU_MAX_BANK1_SENSORS] = {
0x00, 0x01, 0x03, 0x04, 0x0A, 0x08, 0x0E, 0x02,
0x09, 0x06, 0x05, 0x0B, 0x0F, 0x0D, 0x07, 0x0C };
if (!(data = kzalloc(sizeof(struct abituguru_data), GFP_KERNEL)))
data = kzalloc(sizeof(struct abituguru_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start;
@ -1164,9 +1290,11 @@ static int __devinit abituguru_probe(struct platform_device *pdev)
if (inb_p(data->addr + ABIT_UGURU_DATA) == ABIT_UGURU_STATUS_INPUT)
data->uguru_ready = 1;
/* Completely read the uGuru this has 2 purposes:
- testread / see if one really is there.
- make an in memory copy of all the uguru settings for future use. */
/*
* Completely read the uGuru this has 2 purposes:
* - testread / see if one really is there.
* - make an in memory copy of all the uguru settings for future use.
*/
if (abituguru_read(data, ABIT_UGURU_ALARM_BANK, 0,
data->alarms, 3, ABIT_UGURU_MAX_RETRIES) != 3)
goto abituguru_probe_error;
@ -1181,11 +1309,13 @@ static int __devinit abituguru_probe(struct platform_device *pdev)
ABIT_UGURU_MAX_RETRIES) != 3)
goto abituguru_probe_error;
}
/* Note: We don't know how many bank2 sensors / pwms there really are,
but in order to "detect" this we need to read the maximum amount
anyways. If we read sensors/pwms not there we'll just read crap
this can't hurt. We need the detection because we don't want
unwanted writes, which will hurt! */
/*
* Note: We don't know how many bank2 sensors / pwms there really are,
* but in order to "detect" this we need to read the maximum amount
* anyways. If we read sensors/pwms not there we'll just read crap
* this can't hurt. We need the detection because we don't want
* unwanted writes, which will hurt!
*/
for (i = 0; i < ABIT_UGURU_MAX_BANK2_SENSORS; i++) {
if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK2, i,
&data->bank2_value[i], 1,
@ -1332,24 +1462,26 @@ static struct abituguru_data *abituguru_update_device(struct device *dev)
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ)) {
success = 0;
if ((err = abituguru_read(data, ABIT_UGURU_ALARM_BANK, 0,
data->alarms, 3, 0)) != 3)
err = abituguru_read(data, ABIT_UGURU_ALARM_BANK, 0,
data->alarms, 3, 0);
if (err != 3)
goto LEAVE_UPDATE;
for (i = 0; i < ABIT_UGURU_MAX_BANK1_SENSORS; i++) {
if ((err = abituguru_read(data,
ABIT_UGURU_SENSOR_BANK1, i,
&data->bank1_value[i], 1, 0)) != 1)
err = abituguru_read(data, ABIT_UGURU_SENSOR_BANK1,
i, &data->bank1_value[i], 1, 0);
if (err != 1)
goto LEAVE_UPDATE;
if ((err = abituguru_read(data,
ABIT_UGURU_SENSOR_BANK1 + 1, i,
data->bank1_settings[i], 3, 0)) != 3)
err = abituguru_read(data, ABIT_UGURU_SENSOR_BANK1 + 1,
i, data->bank1_settings[i], 3, 0);
if (err != 3)
goto LEAVE_UPDATE;
}
for (i = 0; i < data->bank2_sensors; i++)
if ((err = abituguru_read(data,
ABIT_UGURU_SENSOR_BANK2, i,
&data->bank2_value[i], 1, 0)) != 1)
for (i = 0; i < data->bank2_sensors; i++) {
err = abituguru_read(data, ABIT_UGURU_SENSOR_BANK2, i,
&data->bank2_value[i], 1, 0);
if (err != 1)
goto LEAVE_UPDATE;
}
/* success! */
success = 1;
data->update_timeouts = 0;
@ -1385,8 +1517,10 @@ LEAVE_UPDATE:
static int abituguru_suspend(struct platform_device *pdev, pm_message_t state)
{
struct abituguru_data *data = platform_get_drvdata(pdev);
/* make sure all communications with the uguru are done and no new
ones are started */
/*
* make sure all communications with the uguru are done and no new
* ones are started
*/
mutex_lock(&data->update_lock);
return 0;
}
@ -1418,12 +1552,14 @@ static struct platform_driver abituguru_driver = {
static int __init abituguru_detect(void)
{
/* See if there is an uguru there. After a reboot uGuru will hold 0x00
at DATA and 0xAC, when this driver has already been loaded once
DATA will hold 0x08. For most uGuru's CMD will hold 0xAC in either
scenario but some will hold 0x00.
Some uGuru's initially hold 0x09 at DATA and will only hold 0x08
after reading CMD first, so CMD must be read first! */
/*
* See if there is an uguru there. After a reboot uGuru will hold 0x00
* at DATA and 0xAC, when this driver has already been loaded once
* DATA will hold 0x08. For most uGuru's CMD will hold 0xAC in either
* scenario but some will hold 0x00.
* Some uGuru's initially hold 0x09 at DATA and will only hold 0x08
* after reading CMD first, so CMD must be read first!
*/
u8 cmd_val = inb_p(ABIT_UGURU_BASE + ABIT_UGURU_CMD);
u8 data_val = inb_p(ABIT_UGURU_BASE + ABIT_UGURU_DATA);
if (((data_val == 0x00) || (data_val == 0x08)) &&