mmc: sdhci: split up sdhci.h for sdhci-pltfm users
Some platforms based on sdhci-pltfm need to set their own quirks. Previously to this patch, the quirks were in drivers/mmc/host/sdhci.h. This patch splits drivers/mmc/host/sdhci.h into two parts: * drivers/mmc/host/sdhci.h includes the HC registers and I/O accessors. * include/linux/mmc/sdhci.h includes the sdhci structure and quirks. Instead of including drivers/mmc/host/sdhci.h, -pltfm drivers should now include include/linux/mmc/sdhci.h and include/linux/sdhci-pltfm.h. This patch avoids adding/changing the calls/flags in the sdhci_pltfm_data structure. It has been tested on STM platforms (e.g. STx7106, STx7108, STx5206) where the driver is configured and used as shown in the example below: [snip] static int mmc_pad_resources(struct sdhci_host *sdhci) { if (!devm_stm_pad_claim(sdhci->mmc->parent, &stx7108_mmc_pad_config, dev_name(sdhci->mmc->parent))) return -ENODEV; return 0; } static struct sdhci_pltfm_data stx7108_mmc_platform_data = { .init = mmc_pad_resources, .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, }; static struct platform_device stx7108_mmc_device = { .name = "sdhci", [snip] Note: drivers/mmc/host/sdhci.h now also includes linux/mmc/sdhci.h, and no modifications should be needed on other sdhci-<XXX> drivers. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
This commit is contained in:
parent
8364248a82
commit
1978fda85d
2 changed files with 151 additions and 131 deletions
|
@ -1,6 +1,8 @@
|
|||
/*
|
||||
* linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver
|
||||
*
|
||||
* Header file for Host Controller registers and I/O accessors.
|
||||
*
|
||||
* Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
|
@ -8,14 +10,16 @@
|
|||
* the Free Software Foundation; either version 2 of the License, or (at
|
||||
* your option) any later version.
|
||||
*/
|
||||
#ifndef __SDHCI_H
|
||||
#define __SDHCI_H
|
||||
#ifndef __SDHCI_HW_H
|
||||
#define __SDHCI_HW_H
|
||||
|
||||
#include <linux/scatterlist.h>
|
||||
#include <linux/compiler.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
#include <linux/mmc/sdhci.h>
|
||||
|
||||
/*
|
||||
* Controller registers
|
||||
*/
|
||||
|
@ -192,134 +196,6 @@
|
|||
#define SDHCI_MAX_DIV_SPEC_200 256
|
||||
#define SDHCI_MAX_DIV_SPEC_300 2046
|
||||
|
||||
struct sdhci_ops;
|
||||
|
||||
struct sdhci_host {
|
||||
/* Data set by hardware interface driver */
|
||||
const char *hw_name; /* Hardware bus name */
|
||||
|
||||
unsigned int quirks; /* Deviations from spec. */
|
||||
|
||||
/* Controller doesn't honor resets unless we touch the clock register */
|
||||
#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0)
|
||||
/* Controller has bad caps bits, but really supports DMA */
|
||||
#define SDHCI_QUIRK_FORCE_DMA (1<<1)
|
||||
/* Controller doesn't like to be reset when there is no card inserted. */
|
||||
#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
|
||||
/* Controller doesn't like clearing the power reg before a change */
|
||||
#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
|
||||
/* Controller has flaky internal state so reset it on each ios change */
|
||||
#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4)
|
||||
/* Controller has an unusable DMA engine */
|
||||
#define SDHCI_QUIRK_BROKEN_DMA (1<<5)
|
||||
/* Controller has an unusable ADMA engine */
|
||||
#define SDHCI_QUIRK_BROKEN_ADMA (1<<6)
|
||||
/* Controller can only DMA from 32-bit aligned addresses */
|
||||
#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7)
|
||||
/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
|
||||
#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8)
|
||||
/* Controller can only ADMA chunks that are a multiple of 32 bits */
|
||||
#define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9)
|
||||
/* Controller needs to be reset after each request to stay stable */
|
||||
#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10)
|
||||
/* Controller needs voltage and power writes to happen separately */
|
||||
#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11)
|
||||
/* Controller provides an incorrect timeout value for transfers */
|
||||
#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
|
||||
/* Controller has an issue with buffer bits for small transfers */
|
||||
#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
|
||||
/* Controller does not provide transfer-complete interrupt when not busy */
|
||||
#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14)
|
||||
/* Controller has unreliable card detection */
|
||||
#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15)
|
||||
/* Controller reports inverted write-protect state */
|
||||
#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16)
|
||||
/* Controller has nonstandard clock management */
|
||||
#define SDHCI_QUIRK_NONSTANDARD_CLOCK (1<<17)
|
||||
/* Controller does not like fast PIO transfers */
|
||||
#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18)
|
||||
/* Controller losing signal/interrupt enable states after reset */
|
||||
#define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET (1<<19)
|
||||
/* Controller has to be forced to use block size of 2048 bytes */
|
||||
#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20)
|
||||
/* Controller cannot do multi-block transfers */
|
||||
#define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21)
|
||||
/* Controller can only handle 1-bit data transfers */
|
||||
#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22)
|
||||
/* Controller needs 10ms delay between applying power and clock */
|
||||
#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23)
|
||||
/* Controller uses SDCLK instead of TMCLK for data timeouts */
|
||||
#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24)
|
||||
/* Controller reports wrong base clock capability */
|
||||
#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25)
|
||||
/* Controller cannot support End Attribute in NOP ADMA descriptor */
|
||||
#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26)
|
||||
/* Controller is missing device caps. Use caps provided by host */
|
||||
#define SDHCI_QUIRK_MISSING_CAPS (1<<27)
|
||||
/* Controller uses Auto CMD12 command to stop the transfer */
|
||||
#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28)
|
||||
/* Controller doesn't have HISPD bit field in HI-SPEED SD card */
|
||||
#define SDHCI_QUIRK_NO_HISPD_BIT (1<<29)
|
||||
|
||||
int irq; /* Device IRQ */
|
||||
void __iomem * ioaddr; /* Mapped address */
|
||||
|
||||
const struct sdhci_ops *ops; /* Low level hw interface */
|
||||
|
||||
struct regulator *vmmc; /* Power regulator */
|
||||
|
||||
/* Internal data */
|
||||
struct mmc_host *mmc; /* MMC structure */
|
||||
u64 dma_mask; /* custom DMA mask */
|
||||
|
||||
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
|
||||
struct led_classdev led; /* LED control */
|
||||
char led_name[32];
|
||||
#endif
|
||||
|
||||
spinlock_t lock; /* Mutex */
|
||||
|
||||
int flags; /* Host attributes */
|
||||
#define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */
|
||||
#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */
|
||||
#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */
|
||||
#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */
|
||||
|
||||
unsigned int version; /* SDHCI spec. version */
|
||||
|
||||
unsigned int max_clk; /* Max possible freq (MHz) */
|
||||
unsigned int timeout_clk; /* Timeout freq (KHz) */
|
||||
|
||||
unsigned int clock; /* Current clock (MHz) */
|
||||
u8 pwr; /* Current voltage */
|
||||
|
||||
struct mmc_request *mrq; /* Current request */
|
||||
struct mmc_command *cmd; /* Current command */
|
||||
struct mmc_data *data; /* Current data request */
|
||||
unsigned int data_early:1; /* Data finished before cmd */
|
||||
|
||||
struct sg_mapping_iter sg_miter; /* SG state for PIO */
|
||||
unsigned int blocks; /* remaining PIO blocks */
|
||||
|
||||
int sg_count; /* Mapped sg entries */
|
||||
|
||||
u8 *adma_desc; /* ADMA descriptor table */
|
||||
u8 *align_buffer; /* Bounce buffer */
|
||||
|
||||
dma_addr_t adma_addr; /* Mapped ADMA descr. table */
|
||||
dma_addr_t align_addr; /* Mapped bounce buffer */
|
||||
|
||||
struct tasklet_struct card_tasklet; /* Tasklet structures */
|
||||
struct tasklet_struct finish_tasklet;
|
||||
|
||||
struct timer_list timer; /* Timer for timeouts */
|
||||
|
||||
unsigned int caps; /* Alternative capabilities */
|
||||
|
||||
unsigned long private[0] ____cacheline_aligned;
|
||||
};
|
||||
|
||||
|
||||
struct sdhci_ops {
|
||||
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
|
||||
u32 (*read_l)(struct sdhci_host *host, int reg);
|
||||
|
@ -440,4 +316,4 @@ extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state);
|
|||
extern int sdhci_resume_host(struct sdhci_host *host);
|
||||
#endif
|
||||
|
||||
#endif /* __SDHCI_H */
|
||||
#endif /* __SDHCI_HW_H */
|
||||
|
|
144
include/linux/mmc/sdhci.h
Normal file
144
include/linux/mmc/sdhci.h
Normal file
|
@ -0,0 +1,144 @@
|
|||
/*
|
||||
* linux/include/linux/mmc/sdhci.h - Secure Digital Host Controller Interface
|
||||
*
|
||||
* Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or (at
|
||||
* your option) any later version.
|
||||
*/
|
||||
#ifndef __SDHCI_H
|
||||
#define __SDHCI_H
|
||||
|
||||
#include <linux/scatterlist.h>
|
||||
#include <linux/compiler.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/mmc/host.h>
|
||||
|
||||
struct sdhci_host {
|
||||
/* Data set by hardware interface driver */
|
||||
const char *hw_name; /* Hardware bus name */
|
||||
|
||||
unsigned int quirks; /* Deviations from spec. */
|
||||
|
||||
/* Controller doesn't honor resets unless we touch the clock register */
|
||||
#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0)
|
||||
/* Controller has bad caps bits, but really supports DMA */
|
||||
#define SDHCI_QUIRK_FORCE_DMA (1<<1)
|
||||
/* Controller doesn't like to be reset when there is no card inserted. */
|
||||
#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
|
||||
/* Controller doesn't like clearing the power reg before a change */
|
||||
#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
|
||||
/* Controller has flaky internal state so reset it on each ios change */
|
||||
#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4)
|
||||
/* Controller has an unusable DMA engine */
|
||||
#define SDHCI_QUIRK_BROKEN_DMA (1<<5)
|
||||
/* Controller has an unusable ADMA engine */
|
||||
#define SDHCI_QUIRK_BROKEN_ADMA (1<<6)
|
||||
/* Controller can only DMA from 32-bit aligned addresses */
|
||||
#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7)
|
||||
/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
|
||||
#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8)
|
||||
/* Controller can only ADMA chunks that are a multiple of 32 bits */
|
||||
#define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9)
|
||||
/* Controller needs to be reset after each request to stay stable */
|
||||
#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10)
|
||||
/* Controller needs voltage and power writes to happen separately */
|
||||
#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11)
|
||||
/* Controller provides an incorrect timeout value for transfers */
|
||||
#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
|
||||
/* Controller has an issue with buffer bits for small transfers */
|
||||
#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
|
||||
/* Controller does not provide transfer-complete interrupt when not busy */
|
||||
#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14)
|
||||
/* Controller has unreliable card detection */
|
||||
#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15)
|
||||
/* Controller reports inverted write-protect state */
|
||||
#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16)
|
||||
/* Controller has nonstandard clock management */
|
||||
#define SDHCI_QUIRK_NONSTANDARD_CLOCK (1<<17)
|
||||
/* Controller does not like fast PIO transfers */
|
||||
#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18)
|
||||
/* Controller losing signal/interrupt enable states after reset */
|
||||
#define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET (1<<19)
|
||||
/* Controller has to be forced to use block size of 2048 bytes */
|
||||
#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20)
|
||||
/* Controller cannot do multi-block transfers */
|
||||
#define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21)
|
||||
/* Controller can only handle 1-bit data transfers */
|
||||
#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22)
|
||||
/* Controller needs 10ms delay between applying power and clock */
|
||||
#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23)
|
||||
/* Controller uses SDCLK instead of TMCLK for data timeouts */
|
||||
#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24)
|
||||
/* Controller reports wrong base clock capability */
|
||||
#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25)
|
||||
/* Controller cannot support End Attribute in NOP ADMA descriptor */
|
||||
#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26)
|
||||
/* Controller is missing device caps. Use caps provided by host */
|
||||
#define SDHCI_QUIRK_MISSING_CAPS (1<<27)
|
||||
/* Controller uses Auto CMD12 command to stop the transfer */
|
||||
#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28)
|
||||
/* Controller doesn't have HISPD bit field in HI-SPEED SD card */
|
||||
#define SDHCI_QUIRK_NO_HISPD_BIT (1<<29)
|
||||
|
||||
int irq; /* Device IRQ */
|
||||
void __iomem *ioaddr; /* Mapped address */
|
||||
|
||||
const struct sdhci_ops *ops; /* Low level hw interface */
|
||||
|
||||
struct regulator *vmmc; /* Power regulator */
|
||||
|
||||
/* Internal data */
|
||||
struct mmc_host *mmc; /* MMC structure */
|
||||
u64 dma_mask; /* custom DMA mask */
|
||||
|
||||
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
|
||||
struct led_classdev led; /* LED control */
|
||||
char led_name[32];
|
||||
#endif
|
||||
|
||||
spinlock_t lock; /* Mutex */
|
||||
|
||||
int flags; /* Host attributes */
|
||||
#define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */
|
||||
#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */
|
||||
#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */
|
||||
#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */
|
||||
|
||||
unsigned int version; /* SDHCI spec. version */
|
||||
|
||||
unsigned int max_clk; /* Max possible freq (MHz) */
|
||||
unsigned int timeout_clk; /* Timeout freq (KHz) */
|
||||
|
||||
unsigned int clock; /* Current clock (MHz) */
|
||||
u8 pwr; /* Current voltage */
|
||||
|
||||
struct mmc_request *mrq; /* Current request */
|
||||
struct mmc_command *cmd; /* Current command */
|
||||
struct mmc_data *data; /* Current data request */
|
||||
unsigned int data_early:1; /* Data finished before cmd */
|
||||
|
||||
struct sg_mapping_iter sg_miter; /* SG state for PIO */
|
||||
unsigned int blocks; /* remaining PIO blocks */
|
||||
|
||||
int sg_count; /* Mapped sg entries */
|
||||
|
||||
u8 *adma_desc; /* ADMA descriptor table */
|
||||
u8 *align_buffer; /* Bounce buffer */
|
||||
|
||||
dma_addr_t adma_addr; /* Mapped ADMA descr. table */
|
||||
dma_addr_t align_addr; /* Mapped bounce buffer */
|
||||
|
||||
struct tasklet_struct card_tasklet; /* Tasklet structures */
|
||||
struct tasklet_struct finish_tasklet;
|
||||
|
||||
struct timer_list timer; /* Timer for timeouts */
|
||||
|
||||
unsigned int caps; /* Alternative capabilities */
|
||||
|
||||
unsigned long private[0] ____cacheline_aligned;
|
||||
};
|
||||
#endif /* __SDHCI_H */
|
Reference in a new issue