drivers: regulator: add Maxim 8998 driver
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> This patch adds voltage regulator driver for Maxim 8998 chip. This chip is used on Samsung Aquila and GONI boards and provides following functionalities: - 4 BUCK voltage converters, 17 LDO power regulators and 5 other power controllers - battery charger This patch adds basic driver for voltage regulators and MAX 8998 MFD core. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
This commit is contained in:
Kyungmin Park
Liam Girdwood
parent
51bd6943cd
commit
156f252857
|
|
@ -252,6 +252,16 @@ config MFD_MAX8925
|
|||
accessing the device, additional drivers must be enabled in order
|
||||
to use the functionality of the device.
|
||||
|
||||
config MFD_MAX8998
|
||||
bool "Maxim Semiconductor MAX8998 PMIC Support"
|
||||
depends on I2C=y
|
||||
select MFD_CORE
|
||||
help
|
||||
Say yes here to support for Maxim Semiconductor MAX8998. This is
|
||||
a Power Management IC. This driver provies common support for
|
||||
accessing the device, additional drivers must be enabled in order
|
||||
to use the functionality of the device.
|
||||
|
||||
config MFD_WM8400
|
||||
tristate "Support Wolfson Microelectronics WM8400"
|
||||
select MFD_CORE
|
||||
|
|
|
|||
|
|
@ -56,6 +56,7 @@ obj-$(CONFIG_UCB1400_CORE) += ucb1400_core.o
|
|||
obj-$(CONFIG_PMIC_DA903X) += da903x.o
|
||||
max8925-objs := max8925-core.o max8925-i2c.o
|
||||
obj-$(CONFIG_MFD_MAX8925) += max8925.o
|
||||
obj-$(CONFIG_MFD_MAX8998) += max8998.o
|
||||
|
||||
pcf50633-objs := pcf50633-core.o pcf50633-irq.o
|
||||
obj-$(CONFIG_MFD_PCF50633) += pcf50633.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,160 @@
|
|||
/*
|
||||
* max8698.c - mfd core driver for the Maxim 8998
|
||||
*
|
||||
* Copyright (C) 2009-2010 Samsung Electronics
|
||||
* Kyungmin Park <kyungmin.park@samsung.com>
|
||||
* Marek Szyprowski <m.szyprowski@samsung.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/moduleparam.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/mfd/core.h>
|
||||
#include <linux/mfd/max8998.h>
|
||||
#include <linux/mfd/max8998-private.h>
|
||||
|
||||
static struct mfd_cell max8998_devs[] = {
|
||||
{
|
||||
.name = "max8998-pmic",
|
||||
}
|
||||
};
|
||||
|
||||
static int max8998_i2c_device_read(struct max8998_dev *max8998, u8 reg, u8 *dest)
|
||||
{
|
||||
struct i2c_client *client = max8998->i2c_client;
|
||||
int ret;
|
||||
|
||||
mutex_lock(&max8998->iolock);
|
||||
ret = i2c_smbus_read_byte_data(client, reg);
|
||||
mutex_unlock(&max8998->iolock);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret &= 0xff;
|
||||
*dest = ret;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int max8998_i2c_device_write(struct max8998_dev *max8998, u8 reg, u8 value)
|
||||
{
|
||||
struct i2c_client *client = max8998->i2c_client;
|
||||
int ret;
|
||||
|
||||
mutex_lock(&max8998->iolock);
|
||||
ret = i2c_smbus_write_byte_data(client, reg, value);
|
||||
mutex_unlock(&max8998->iolock);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int max8998_i2c_device_update(struct max8998_dev *max8998, u8 reg,
|
||||
u8 val, u8 mask)
|
||||
{
|
||||
struct i2c_client *client = max8998->i2c_client;
|
||||
int ret;
|
||||
|
||||
mutex_lock(&max8998->iolock);
|
||||
ret = i2c_smbus_read_byte_data(client, reg);
|
||||
if (ret >= 0) {
|
||||
u8 old_val = ret & 0xff;
|
||||
u8 new_val = (val & mask) | (old_val & (~mask));
|
||||
ret = i2c_smbus_write_byte_data(client, reg, new_val);
|
||||
if (ret >= 0)
|
||||
ret = 0;
|
||||
}
|
||||
mutex_unlock(&max8998->iolock);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int max8998_i2c_probe(struct i2c_client *i2c,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct max8998_dev *max8998;
|
||||
int ret = 0;
|
||||
|
||||
max8998 = kzalloc(sizeof(struct max8998_dev), GFP_KERNEL);
|
||||
if (max8998 == NULL) {
|
||||
kfree(i2c);
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
i2c_set_clientdata(i2c, max8998);
|
||||
max8998->dev = &i2c->dev;
|
||||
max8998->i2c_client = i2c;
|
||||
max8998->dev_read = max8998_i2c_device_read;
|
||||
max8998->dev_write = max8998_i2c_device_write;
|
||||
max8998->dev_update = max8998_i2c_device_update;
|
||||
mutex_init(&max8998->iolock);
|
||||
|
||||
ret = mfd_add_devices(max8998->dev, -1,
|
||||
max8998_devs, ARRAY_SIZE(max8998_devs),
|
||||
NULL, 0);
|
||||
if (ret < 0)
|
||||
goto err;
|
||||
|
||||
return ret;
|
||||
|
||||
err:
|
||||
mfd_remove_devices(max8998->dev);
|
||||
kfree(max8998);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int max8998_i2c_remove(struct i2c_client *i2c)
|
||||
{
|
||||
struct max8998_dev *max8998 = i2c_get_clientdata(i2c);
|
||||
|
||||
mfd_remove_devices(max8998->dev);
|
||||
kfree(max8998);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id max8998_i2c_id[] = {
|
||||
{ "max8998", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, max8998_i2c_id);
|
||||
|
||||
static struct i2c_driver max8998_i2c_driver = {
|
||||
.driver = {
|
||||
.name = "max8998",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.probe = max8998_i2c_probe,
|
||||
.remove = max8998_i2c_remove,
|
||||
.id_table = max8998_i2c_id,
|
||||
};
|
||||
|
||||
static int __init max8998_i2c_init(void)
|
||||
{
|
||||
return i2c_add_driver(&max8998_i2c_driver);
|
||||
}
|
||||
/* init early so consumer devices can complete system boot */
|
||||
subsys_initcall(max8998_i2c_init);
|
||||
|
||||
static void __exit max8998_i2c_exit(void)
|
||||
{
|
||||
i2c_del_driver(&max8998_i2c_driver);
|
||||
}
|
||||
module_exit(max8998_i2c_exit);
|
||||
|
||||
MODULE_DESCRIPTION("MAXIM 8998 multi-function core driver");
|
||||
MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
|
@ -100,6 +100,15 @@ config REGULATOR_MAX8925
|
|||
help
|
||||
Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
|
||||
|
||||
config REGULATOR_MAX8998
|
||||
tristate "Maxim 8998 voltage regulator"
|
||||
depends on I2C
|
||||
default n
|
||||
help
|
||||
This driver controls a Maxim 8998 voltage output regulator
|
||||
via I2C bus. The provided regulator is suitable for S3C6410
|
||||
and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
|
||||
|
||||
config REGULATOR_TWL4030
|
||||
bool "TI TWL4030/TWL5030/TWL6030/TPS695x0 PMIC"
|
||||
depends on TWL4030_CORE
|
||||
|
|
|
|||
|
|
@ -17,6 +17,7 @@ obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
|
|||
obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o
|
||||
obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
|
||||
obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
|
||||
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
|
||||
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
|
||||
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,610 @@
|
|||
/*
|
||||
* max8998.c - Voltage regulator driver for the Maxim 8998
|
||||
*
|
||||
* Copyright (C) 2009-2010 Samsung Electronics
|
||||
* Kyungmin Park <kyungmin.park@samsung.com>
|
||||
* Marek Szyprowski <m.szyprowski@samsung.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/mfd/max8998.h>
|
||||
#include <linux/mfd/max8998-private.h>
|
||||
|
||||
struct max8998_data {
|
||||
struct device *dev;
|
||||
struct max8998_dev *iodev;
|
||||
int num_regulators;
|
||||
struct regulator_dev **rdev;
|
||||
};
|
||||
|
||||
struct voltage_map_desc {
|
||||
int min;
|
||||
int max;
|
||||
int step;
|
||||
};
|
||||
|
||||
/* Voltage maps */
|
||||
static const struct voltage_map_desc ldo23_voltage_map_desc = {
|
||||
.min = 800, .step = 50, .max = 1300,
|
||||
};
|
||||
static const struct voltage_map_desc ldo456711_voltage_map_desc = {
|
||||
.min = 1600, .step = 100, .max = 3600,
|
||||
};
|
||||
static const struct voltage_map_desc ldo8_voltage_map_desc = {
|
||||
.min = 3000, .step = 100, .max = 3600,
|
||||
};
|
||||
static const struct voltage_map_desc ldo9_voltage_map_desc = {
|
||||
.min = 2800, .step = 100, .max = 3100,
|
||||
};
|
||||
static const struct voltage_map_desc ldo10_voltage_map_desc = {
|
||||
.min = 950, .step = 50, .max = 1300,
|
||||
};
|
||||
static const struct voltage_map_desc ldo1213_voltage_map_desc = {
|
||||
.min = 800, .step = 100, .max = 3300,
|
||||
};
|
||||
static const struct voltage_map_desc ldo1415_voltage_map_desc = {
|
||||
.min = 1200, .step = 100, .max = 3300,
|
||||
};
|
||||
static const struct voltage_map_desc ldo1617_voltage_map_desc = {
|
||||
.min = 1600, .step = 100, .max = 3600,
|
||||
};
|
||||
static const struct voltage_map_desc buck12_voltage_map_desc = {
|
||||
.min = 750, .step = 25, .max = 1525,
|
||||
};
|
||||
static const struct voltage_map_desc buck3_voltage_map_desc = {
|
||||
.min = 1600, .step = 100, .max = 3600,
|
||||
};
|
||||
static const struct voltage_map_desc buck4_voltage_map_desc = {
|
||||
.min = 800, .step = 100, .max = 2300,
|
||||
};
|
||||
|
||||
static const struct voltage_map_desc *ldo_voltage_map[] = {
|
||||
NULL,
|
||||
NULL,
|
||||
&ldo23_voltage_map_desc, /* LDO2 */
|
||||
&ldo23_voltage_map_desc, /* LDO3 */
|
||||
&ldo456711_voltage_map_desc, /* LDO4 */
|
||||
&ldo456711_voltage_map_desc, /* LDO5 */
|
||||
&ldo456711_voltage_map_desc, /* LDO6 */
|
||||
&ldo456711_voltage_map_desc, /* LDO7 */
|
||||
&ldo8_voltage_map_desc, /* LDO8 */
|
||||
&ldo9_voltage_map_desc, /* LDO9 */
|
||||
&ldo10_voltage_map_desc, /* LDO10 */
|
||||
&ldo456711_voltage_map_desc, /* LDO11 */
|
||||
&ldo1213_voltage_map_desc, /* LDO12 */
|
||||
&ldo1213_voltage_map_desc, /* LDO13 */
|
||||
&ldo1415_voltage_map_desc, /* LDO14 */
|
||||
&ldo1415_voltage_map_desc, /* LDO15 */
|
||||
&ldo1617_voltage_map_desc, /* LDO16 */
|
||||
&ldo1617_voltage_map_desc, /* LDO17 */
|
||||
&buck12_voltage_map_desc, /* BUCK1 */
|
||||
&buck12_voltage_map_desc, /* BUCK2 */
|
||||
&buck3_voltage_map_desc, /* BUCK3 */
|
||||
&buck4_voltage_map_desc, /* BUCK4 */
|
||||
};
|
||||
|
||||
static inline int max8998_get_ldo(struct regulator_dev *rdev)
|
||||
{
|
||||
return rdev_get_id(rdev);
|
||||
}
|
||||
|
||||
static int max8998_list_voltage(struct regulator_dev *rdev,
|
||||
unsigned int selector)
|
||||
{
|
||||
const struct voltage_map_desc *desc;
|
||||
int ldo = max8998_get_ldo(rdev);
|
||||
int val;
|
||||
|
||||
if (ldo > ARRAY_SIZE(ldo_voltage_map))
|
||||
return -EINVAL;
|
||||
|
||||
desc = ldo_voltage_map[ldo];
|
||||
if (desc == NULL)
|
||||
return -EINVAL;
|
||||
|
||||
val = desc->min + desc->step * selector;
|
||||
if (val > desc->max)
|
||||
return -EINVAL;
|
||||
|
||||
return val * 1000;
|
||||
}
|
||||
|
||||
static int max8998_get_enable_register(struct regulator_dev *rdev,
|
||||
int *reg, int *shift)
|
||||
{
|
||||
int ldo = max8998_get_ldo(rdev);
|
||||
|
||||
switch (ldo) {
|
||||
case MAX8998_LDO2 ... MAX8998_LDO5:
|
||||
*reg = MAX8998_REG_ONOFF1;
|
||||
*shift = 3 - (ldo - MAX8998_LDO2);
|
||||
break;
|
||||
case MAX8998_LDO6 ... MAX8998_LDO13:
|
||||
*reg = MAX8998_REG_ONOFF2;
|
||||
*shift = 7 - (ldo - MAX8998_LDO6);
|
||||
break;
|
||||
case MAX8998_LDO14 ... MAX8998_LDO17:
|
||||
*reg = MAX8998_REG_ONOFF3;
|
||||
*shift = 7 - (ldo - MAX8998_LDO14);
|
||||
break;
|
||||
case MAX8998_BUCK1 ... MAX8998_BUCK4:
|
||||
*reg = MAX8998_REG_ONOFF1;
|
||||
*shift = 7 - (ldo - MAX8998_BUCK1);
|
||||
break;
|
||||
case MAX8998_EN32KHZ_AP ... MAX8998_ENVICHG:
|
||||
*reg = MAX8998_REG_ONOFF4;
|
||||
*shift = 7 - (ldo - MAX8998_EN32KHZ_AP);
|
||||
break;
|
||||
case MAX8998_ESAFEOUT1 ... MAX8998_ESAFEOUT2:
|
||||
*reg = MAX8998_REG_CHGR2;
|
||||
*shift = 7 - (ldo - MAX8998_ESAFEOUT1);
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int max8998_ldo_is_enabled(struct regulator_dev *rdev)
|
||||
{
|
||||
struct max8998_data *max8998 = rdev_get_drvdata(rdev);
|
||||
int ret, reg, shift = 8;
|
||||
u8 val;
|
||||
|
||||
ret = max8998_get_enable_register(rdev, ®, &shift);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = max8998_read_reg(max8998->iodev, reg, &val);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
return val & (1 << shift);
|
||||
}
|
||||
|
||||
static int max8998_ldo_enable(struct regulator_dev *rdev)
|
||||
{
|
||||
struct max8998_data *max8998 = rdev_get_drvdata(rdev);
|
||||
int reg, shift = 8, ret;
|
||||
|
||||
ret = max8998_get_enable_register(rdev, ®, &shift);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
return max8998_update_reg(max8998->iodev, reg, 1<<shift, 1<<shift);
|
||||
}
|
||||
|
||||
static int max8998_ldo_disable(struct regulator_dev *rdev)
|
||||
{
|
||||
struct max8998_data *max8998 = rdev_get_drvdata(rdev);
|
||||
int reg, shift = 8, ret;
|
||||
|
||||
ret = max8998_get_enable_register(rdev, ®, &shift);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
return max8998_update_reg(max8998->iodev, reg, 0, 1<<shift);
|
||||
}
|
||||
|
||||
static int max8998_get_voltage_register(struct regulator_dev *rdev,
|
||||
int *_reg, int *_shift, int *_mask)
|
||||
{
|
||||
int ldo = max8998_get_ldo(rdev);
|
||||
int reg, shift = 0, mask = 0xff;
|
||||
|
||||
switch (ldo) {
|
||||
case MAX8998_LDO2 ... MAX8998_LDO3:
|
||||
reg = MAX8998_REG_LDO2_LDO3;
|
||||
mask = 0xf;
|
||||
if (ldo == MAX8998_LDO2)
|
||||
shift = 4;
|
||||
else
|
||||
shift = 0;
|
||||
break;
|
||||
case MAX8998_LDO4 ... MAX8998_LDO7:
|
||||
reg = MAX8998_REG_LDO4 + (ldo - MAX8998_LDO4);
|
||||
break;
|
||||
case MAX8998_LDO8 ... MAX8998_LDO9:
|
||||
reg = MAX8998_REG_LDO8_LDO9;
|
||||
mask = 0xf;
|
||||
if (ldo == MAX8998_LDO8)
|
||||
shift = 4;
|
||||
else
|
||||
shift = 0;
|
||||
break;
|
||||
case MAX8998_LDO10 ... MAX8998_LDO11:
|
||||
reg = MAX8998_REG_LDO10_LDO11;
|
||||
if (ldo == MAX8998_LDO10) {
|
||||
shift = 5;
|
||||
mask = 0x7;
|
||||
} else {
|
||||
shift = 0;
|
||||
mask = 0x1f;
|
||||
}
|
||||
break;
|
||||
case MAX8998_LDO12 ... MAX8998_LDO17:
|
||||
reg = MAX8998_REG_LDO12 + (ldo - MAX8998_LDO12);
|
||||
break;
|
||||
case MAX8998_BUCK1:
|
||||
reg = MAX8998_REG_BUCK1_DVSARM1;
|
||||
break;
|
||||
case MAX8998_BUCK2:
|
||||
reg = MAX8998_REG_BUCK2_DVSINT1;
|
||||
break;
|
||||
case MAX8998_BUCK3:
|
||||
reg = MAX8998_REG_BUCK3;
|
||||
break;
|
||||
case MAX8998_BUCK4:
|
||||
reg = MAX8998_REG_BUCK4;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
*_reg = reg;
|
||||
*_shift = shift;
|
||||
*_mask = mask;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int max8998_get_voltage(struct regulator_dev *rdev)
|
||||
{
|
||||
struct max8998_data *max8998 = rdev_get_drvdata(rdev);
|
||||
int reg, shift = 0, mask, ret;
|
||||
u8 val;
|
||||
|
||||
ret = max8998_get_voltage_register(rdev, ®, &shift, &mask);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = max8998_read_reg(max8998->iodev, reg, &val);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
val >>= shift;
|
||||
val &= mask;
|
||||
|
||||
return max8998_list_voltage(rdev, val);
|
||||
}
|
||||
|
||||
static int max8998_set_voltage(struct regulator_dev *rdev,
|
||||
int min_uV, int max_uV)
|
||||
{
|
||||
struct max8998_data *max8998 = rdev_get_drvdata(rdev);
|
||||
int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
|
||||
const struct voltage_map_desc *desc;
|
||||
int ldo = max8998_get_ldo(rdev);
|
||||
int reg, shift = 0, mask, ret;
|
||||
int i = 0;
|
||||
|
||||
if (ldo > ARRAY_SIZE(ldo_voltage_map))
|
||||
return -EINVAL;
|
||||
|
||||
desc = ldo_voltage_map[ldo];
|
||||
if (desc == NULL)
|
||||
return -EINVAL;
|
||||
|
||||
if (max_vol < desc->min || min_vol > desc->max)
|
||||
return -EINVAL;
|
||||
|
||||
while (desc->min + desc->step*i < max_vol &&
|
||||
desc->min + desc->step*i < desc->max)
|
||||
i++;
|
||||
|
||||
ret = max8998_get_voltage_register(rdev, ®, &shift, &mask);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
return max8998_update_reg(max8998->iodev, reg, i<<shift, mask<<shift);
|
||||
}
|
||||
|
||||
static struct regulator_ops max8998_ldo_ops = {
|
||||
.list_voltage = max8998_list_voltage,
|
||||
.is_enabled = max8998_ldo_is_enabled,
|
||||
.enable = max8998_ldo_enable,
|
||||
.disable = max8998_ldo_disable,
|
||||
.get_voltage = max8998_get_voltage,
|
||||
.set_voltage = max8998_set_voltage,
|
||||
.set_suspend_enable = max8998_ldo_enable,
|
||||
.set_suspend_disable = max8998_ldo_disable,
|
||||
};
|
||||
|
||||
static struct regulator_ops max8998_buck_ops = {
|
||||
.list_voltage = max8998_list_voltage,
|
||||
.is_enabled = max8998_ldo_is_enabled,
|
||||
.enable = max8998_ldo_enable,
|
||||
.disable = max8998_ldo_disable,
|
||||
.get_voltage = max8998_get_voltage,
|
||||
.set_voltage = max8998_set_voltage,
|
||||
.set_suspend_enable = max8998_ldo_enable,
|
||||
.set_suspend_disable = max8998_ldo_disable,
|
||||
};
|
||||
|
||||
static struct regulator_ops max8998_others_ops = {
|
||||
.is_enabled = max8998_ldo_is_enabled,
|
||||
.enable = max8998_ldo_enable,
|
||||
.disable = max8998_ldo_disable,
|
||||
.set_suspend_enable = max8998_ldo_enable,
|
||||
.set_suspend_disable = max8998_ldo_disable,
|
||||
};
|
||||
|
||||
static struct regulator_desc regulators[] = {
|
||||
{
|
||||
.name = "LDO2",
|
||||
.id = MAX8998_LDO2,
|
||||
.ops = &max8998_ldo_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "LDO3",
|
||||
.id = MAX8998_LDO3,
|
||||
.ops = &max8998_ldo_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "LDO4",
|
||||
.id = MAX8998_LDO4,
|
||||
.ops = &max8998_ldo_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "LDO5",
|
||||
.id = MAX8998_LDO5,
|
||||
.ops = &max8998_ldo_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "LDO6",
|
||||
.id = MAX8998_LDO6,
|
||||
.ops = &max8998_ldo_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "LDO7",
|
||||
.id = MAX8998_LDO7,
|
||||
.ops = &max8998_ldo_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "LDO8",
|
||||
.id = MAX8998_LDO8,
|
||||
.ops = &max8998_ldo_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "LDO9",
|
||||
.id = MAX8998_LDO9,
|
||||
.ops = &max8998_ldo_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "LDO10",
|
||||
.id = MAX8998_LDO10,
|
||||
.ops = &max8998_ldo_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "LDO11",
|
||||
.id = MAX8998_LDO11,
|
||||
.ops = &max8998_ldo_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "LDO12",
|
||||
.id = MAX8998_LDO12,
|
||||
.ops = &max8998_ldo_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "LDO13",
|
||||
.id = MAX8998_LDO13,
|
||||
.ops = &max8998_ldo_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "LDO14",
|
||||
.id = MAX8998_LDO14,
|
||||
.ops = &max8998_ldo_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "LDO15",
|
||||
.id = MAX8998_LDO15,
|
||||
.ops = &max8998_ldo_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "LDO16",
|
||||
.id = MAX8998_LDO16,
|
||||
.ops = &max8998_ldo_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "LDO17",
|
||||
.id = MAX8998_LDO17,
|
||||
.ops = &max8998_ldo_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "BUCK1",
|
||||
.id = MAX8998_BUCK1,
|
||||
.ops = &max8998_buck_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "BUCK2",
|
||||
.id = MAX8998_BUCK2,
|
||||
.ops = &max8998_buck_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "BUCK3",
|
||||
.id = MAX8998_BUCK3,
|
||||
.ops = &max8998_buck_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "BUCK4",
|
||||
.id = MAX8998_BUCK4,
|
||||
.ops = &max8998_buck_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "EN32KHz AP",
|
||||
.id = MAX8998_EN32KHZ_AP,
|
||||
.ops = &max8998_others_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "EN32KHz CP",
|
||||
.id = MAX8998_EN32KHZ_CP,
|
||||
.ops = &max8998_others_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "ENVICHG",
|
||||
.id = MAX8998_ENVICHG,
|
||||
.ops = &max8998_others_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "ESAFEOUT1",
|
||||
.id = MAX8998_ESAFEOUT1,
|
||||
.ops = &max8998_others_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "ESAFEOUT2",
|
||||
.id = MAX8998_ESAFEOUT2,
|
||||
.ops = &max8998_others_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
}
|
||||
};
|
||||
|
||||
static __devinit int max8998_pmic_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent);
|
||||
struct max8998_platform_data *pdata = dev_get_platdata(iodev->dev);
|
||||
struct regulator_dev **rdev;
|
||||
struct max8998_data *max8998;
|
||||
int i, ret, size;
|
||||
|
||||
if (!pdata) {
|
||||
dev_err(pdev->dev.parent, "No platform init data supplied\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
max8998 = kzalloc(sizeof(struct max8998_data), GFP_KERNEL);
|
||||
if (!max8998)
|
||||
return -ENOMEM;
|
||||
|
||||
size = sizeof(struct regulator_dev *) * (pdata->num_regulators + 1);
|
||||
max8998->rdev = kzalloc(size, GFP_KERNEL);
|
||||
if (!max8998->rdev) {
|
||||
kfree(max8998);
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
rdev = max8998->rdev;
|
||||
max8998->iodev = iodev;
|
||||
platform_set_drvdata(pdev, max8998);
|
||||
|
||||
for (i = 0; i < pdata->num_regulators; i++) {
|
||||
const struct voltage_map_desc *desc;
|
||||
int id = pdata->regulators[i].id;
|
||||
int index = id - MAX8998_LDO2;
|
||||
|
||||
desc = ldo_voltage_map[id];
|
||||
if (desc && regulators[index].ops != &max8998_others_ops) {
|
||||
int count = (desc->max - desc->min) / desc->step + 1;
|
||||
regulators[index].n_voltages = count;
|
||||
}
|
||||
rdev[i] = regulator_register(®ulators[index], max8998->dev,
|
||||
pdata->regulators[i].initdata, max8998);
|
||||
if (IS_ERR(rdev[i])) {
|
||||
ret = PTR_ERR(rdev[i]);
|
||||
dev_err(max8998->dev, "regulator init failed\n");
|
||||
rdev[i] = NULL;
|
||||
goto err;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
return 0;
|
||||
err:
|
||||
for (i = 0; i <= max8998->num_regulators; i++)
|
||||
if (rdev[i])
|
||||
regulator_unregister(rdev[i]);
|
||||
|
||||
kfree(max8998->rdev);
|
||||
kfree(max8998);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int __devexit max8998_pmic_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct max8998_data *max8998 = platform_get_drvdata(pdev);
|
||||
struct regulator_dev **rdev = max8998->rdev;
|
||||
int i;
|
||||
|
||||
for (i = 0; i <= max8998->num_regulators; i++)
|
||||
if (rdev[i])
|
||||
regulator_unregister(rdev[i]);
|
||||
|
||||
kfree(max8998->rdev);
|
||||
kfree(max8998);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver max8998_pmic_driver = {
|
||||
.driver = {
|
||||
.name = "max8998-pmic",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.probe = max8998_pmic_probe,
|
||||
.remove = __devexit_p(max8998_pmic_remove),
|
||||
};
|
||||
|
||||
static int __init max8998_pmic_init(void)
|
||||
{
|
||||
return platform_driver_register(&max8998_pmic_driver);
|
||||
}
|
||||
subsys_initcall(max8998_pmic_init);
|
||||
|
||||
static void __exit max8998_pmic_cleanup(void)
|
||||
{
|
||||
platform_driver_unregister(&max8998_pmic_driver);
|
||||
}
|
||||
module_exit(max8998_pmic_cleanup);
|
||||
|
||||
MODULE_DESCRIPTION("MAXIM 8998 voltage regulator driver");
|
||||
MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
|
@ -0,0 +1,112 @@
|
|||
/*
|
||||
* max8698.h - Voltage regulator driver for the Maxim 8998
|
||||
*
|
||||
* Copyright (C) 2009-2010 Samsung Electrnoics
|
||||
* Kyungmin Park <kyungmin.park@samsung.com>
|
||||
* Marek Szyprowski <m.szyprowski@samsung.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#ifndef __LINUX_MFD_MAX8998_PRIV_H
|
||||
#define __LINUX_MFD_MAX8998_PRIV_H
|
||||
|
||||
/* MAX 8998 registers */
|
||||
enum {
|
||||
MAX8998_REG_IRQ1,
|
||||
MAX8998_REG_IRQ2,
|
||||
MAX8998_REG_IRQ3,
|
||||
MAX8998_REG_IRQ4,
|
||||
MAX8998_REG_IRQM1,
|
||||
MAX8998_REG_IRQM2,
|
||||
MAX8998_REG_IRQM3,
|
||||
MAX8998_REG_IRQM4,
|
||||
MAX8998_REG_STATUS1,
|
||||
MAX8998_REG_STATUS2,
|
||||
MAX8998_REG_STATUSM1,
|
||||
MAX8998_REG_STATUSM2,
|
||||
MAX8998_REG_CHGR1,
|
||||
MAX8998_REG_CHGR2,
|
||||
MAX8998_REG_LDO_ACTIVE_DISCHARGE1,
|
||||
MAX8998_REG_LDO_ACTIVE_DISCHARGE2,
|
||||
MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
|
||||
MAX8998_REG_ONOFF1,
|
||||
MAX8998_REG_ONOFF2,
|
||||
MAX8998_REG_ONOFF3,
|
||||
MAX8998_REG_ONOFF4,
|
||||
MAX8998_REG_BUCK1_DVSARM1,
|
||||
MAX8998_REG_BUCK1_DVSARM2,
|
||||
MAX8998_REG_BUCK1_DVSARM3,
|
||||
MAX8998_REG_BUCK1_DVSARM4,
|
||||
MAX8998_REG_BUCK2_DVSINT1,
|
||||
MAX8998_REG_BUCK2_DVSINT2,
|
||||
MAX8998_REG_BUCK3,
|
||||
MAX8998_REG_BUCK4,
|
||||
MAX8998_REG_LDO2_LDO3,
|
||||
MAX8998_REG_LDO4,
|
||||
MAX8998_REG_LDO5,
|
||||
MAX8998_REG_LDO6,
|
||||
MAX8998_REG_LDO7,
|
||||
MAX8998_REG_LDO8_LDO9,
|
||||
MAX8998_REG_LDO10_LDO11,
|
||||
MAX8998_REG_LDO12,
|
||||
MAX8998_REG_LDO13,
|
||||
MAX8998_REG_LDO14,
|
||||
MAX8998_REG_LDO15,
|
||||
MAX8998_REG_LDO16,
|
||||
MAX8998_REG_LDO17,
|
||||
MAX8998_REG_BKCHR,
|
||||
MAX8998_REG_LBCNFG1,
|
||||
MAX8998_REG_LBCNFG2,
|
||||
};
|
||||
|
||||
/**
|
||||
* struct max8998_dev - max8998 master device for sub-drivers
|
||||
* @dev: master device of the chip (can be used to access platform data)
|
||||
* @i2c_client: i2c client private data
|
||||
* @dev_read(): chip register read function
|
||||
* @dev_write(): chip register write function
|
||||
* @dev_update(): chip register update function
|
||||
* @iolock: mutex for serializing io access
|
||||
*/
|
||||
|
||||
struct max8998_dev {
|
||||
struct device *dev;
|
||||
struct i2c_client *i2c_client;
|
||||
int (*dev_read)(struct max8998_dev *max8998, u8 reg, u8 *dest);
|
||||
int (*dev_write)(struct max8998_dev *max8998, u8 reg, u8 val);
|
||||
int (*dev_update)(struct max8998_dev *max8998, u8 reg, u8 val, u8 mask);
|
||||
struct mutex iolock;
|
||||
};
|
||||
|
||||
static inline int max8998_read_reg(struct max8998_dev *max8998, u8 reg,
|
||||
u8 *value)
|
||||
{
|
||||
return max8998->dev_read(max8998, reg, value);
|
||||
}
|
||||
|
||||
static inline int max8998_write_reg(struct max8998_dev *max8998, u8 reg,
|
||||
u8 value)
|
||||
{
|
||||
return max8998->dev_write(max8998, reg, value);
|
||||
}
|
||||
|
||||
static inline int max8998_update_reg(struct max8998_dev *max8998, u8 reg,
|
||||
u8 value, u8 mask)
|
||||
{
|
||||
return max8998->dev_update(max8998, reg, value, mask);
|
||||
}
|
||||
|
||||
#endif /* __LINUX_MFD_MAX8998_PRIV_H */
|
||||
|
|
@ -0,0 +1,78 @@
|
|||
/*
|
||||
* max8698.h - Voltage regulator driver for the Maxim 8998
|
||||
*
|
||||
* Copyright (C) 2009-2010 Samsung Electrnoics
|
||||
* Kyungmin Park <kyungmin.park@samsung.com>
|
||||
* Marek Szyprowski <m.szyprowski@samsung.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#ifndef __LINUX_MFD_MAX8998_H
|
||||
#define __LINUX_MFD_MAX8998_H
|
||||
|
||||
#include <linux/regulator/machine.h>
|
||||
|
||||
/* MAX 8998 regulator ids */
|
||||
enum {
|
||||
MAX8998_LDO2 = 2,
|
||||
MAX8998_LDO3,
|
||||
MAX8998_LDO4,
|
||||
MAX8998_LDO5,
|
||||
MAX8998_LDO6,
|
||||
MAX8998_LDO7,
|
||||
MAX8998_LDO8,
|
||||
MAX8998_LDO9,
|
||||
MAX8998_LDO10,
|
||||
MAX8998_LDO11,
|
||||
MAX8998_LDO12,
|
||||
MAX8998_LDO13,
|
||||
MAX8998_LDO14,
|
||||
MAX8998_LDO15,
|
||||
MAX8998_LDO16,
|
||||
MAX8998_LDO17,
|
||||
MAX8998_BUCK1,
|
||||
MAX8998_BUCK2,
|
||||
MAX8998_BUCK3,
|
||||
MAX8998_BUCK4,
|
||||
MAX8998_EN32KHZ_AP,
|
||||
MAX8998_EN32KHZ_CP,
|
||||
MAX8998_ENVICHG,
|
||||
MAX8998_ESAFEOUT1,
|
||||
MAX8998_ESAFEOUT2,
|
||||
};
|
||||
|
||||
/**
|
||||
* max8998_regulator_data - regulator data
|
||||
* @id: regulator id
|
||||
* @initdata: regulator init data (contraints, supplies, ...)
|
||||
*/
|
||||
struct max8998_regulator_data {
|
||||
int id;
|
||||
struct regulator_init_data *initdata;
|
||||
};
|
||||
|
||||
/**
|
||||
* struct max8998_board - packages regulator init data
|
||||
* @num_regulators: number of regultors used
|
||||
* @regulators: array of defined regulators
|
||||
*/
|
||||
|
||||
struct max8998_platform_data {
|
||||
int num_regulators;
|
||||
struct max8998_regulator_data *regulators;
|
||||
};
|
||||
|
||||
#endif /* __LINUX_MFD_MAX8998_H */
|
||||
Reference in New Issue