diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index d675d984c85..d96057f4a0d 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -52,6 +52,8 @@ #include "airo.h" +#define DRV_NAME "airo" + #ifdef CONFIG_PCI static struct pci_device_id card_ids[] = { { 0x14b9, 1, PCI_ANY_ID, PCI_ANY_ID, }, @@ -71,7 +73,7 @@ static int airo_pci_suspend(struct pci_dev *pdev, pm_message_t state); static int airo_pci_resume(struct pci_dev *pdev); static struct pci_driver airo_driver = { - .name = "airo", + .name = DRV_NAME, .id_table = card_ids, .probe = airo_pci_probe, .remove = __devexit_p(airo_pci_remove), @@ -1250,7 +1252,7 @@ static int flashputbuf(struct airo_info *ai); static int flashrestart(struct airo_info *ai,struct net_device *dev); #define airo_print(type, name, fmt, args...) \ - { printk(type "airo(%s): " fmt "\n", name, ##args); } + printk(type DRV_NAME "(%s): " fmt "\n", name, ##args) #define airo_print_info(name, fmt, args...) \ airo_print(KERN_INFO, name, fmt, ##args) @@ -2582,8 +2584,7 @@ static int mpi_init_descriptors (struct airo_info *ai) * 2) Map PCI memory for issueing commands. * 3) Allocate memory (shared) to send and receive ethernet frames. */ -static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci, - const char *name) +static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci) { unsigned long mem_start, mem_len, aux_start, aux_len; int rc = -1; @@ -2597,35 +2598,35 @@ static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci, aux_start = pci_resource_start(pci, 2); aux_len = AUXMEMSIZE; - if (!request_mem_region(mem_start, mem_len, name)) { - airo_print_err(ai->dev->name, "Couldn't get region %x[%x] for %s", - (int)mem_start, (int)mem_len, name); + if (!request_mem_region(mem_start, mem_len, DRV_NAME)) { + airo_print_err("", "Couldn't get region %x[%x]", + (int)mem_start, (int)mem_len); goto out; } - if (!request_mem_region(aux_start, aux_len, name)) { - airo_print_err(ai->dev->name, "Couldn't get region %x[%x] for %s", - (int)aux_start, (int)aux_len, name); + if (!request_mem_region(aux_start, aux_len, DRV_NAME)) { + airo_print_err("", "Couldn't get region %x[%x]", + (int)aux_start, (int)aux_len); goto free_region1; } ai->pcimem = ioremap(mem_start, mem_len); if (!ai->pcimem) { - airo_print_err(ai->dev->name, "Couldn't map region %x[%x] for %s", - (int)mem_start, (int)mem_len, name); + airo_print_err("", "Couldn't map region %x[%x]", + (int)mem_start, (int)mem_len); goto free_region2; } ai->pciaux = ioremap(aux_start, aux_len); if (!ai->pciaux) { - airo_print_err(ai->dev->name, "Couldn't map region %x[%x] for %s", - (int)aux_start, (int)aux_len, name); + airo_print_err("", "Couldn't map region %x[%x]", + (int)aux_start, (int)aux_len); goto free_memmap; } /* Reserve PKTSIZE for each fid and 2K for the Rids */ ai->shared = pci_alloc_consistent(pci, PCI_SHARED_LEN, &ai->shared_dma); if (!ai->shared) { - airo_print_err(ai->dev->name, "Couldn't alloc_consistent %d", - PCI_SHARED_LEN); + airo_print_err("", "Couldn't alloc_consistent %d", + PCI_SHARED_LEN); goto free_auxmap; } @@ -2770,7 +2771,7 @@ static int airo_networks_allocate(struct airo_info *ai) kzalloc(AIRO_MAX_NETWORK_COUNT * sizeof(BSSListElement), GFP_KERNEL); if (!ai->networks) { - airo_print_warn(ai->dev->name, "Out of memory allocating beacons"); + airo_print_warn("", "Out of memory allocating beacons"); return -ENOMEM; } @@ -2798,7 +2799,6 @@ static int airo_test_wpa_capable(struct airo_info *ai) { int status; CapabilityRid cap_rid; - const char *name = ai->dev->name; status = readCapabilityRid(ai, &cap_rid, 1); if (status != SUCCESS) return 0; @@ -2806,12 +2806,12 @@ static int airo_test_wpa_capable(struct airo_info *ai) /* Only firmware versions 5.30.17 or better can do WPA */ if ((cap_rid.softVer > 0x530) || ((cap_rid.softVer == 0x530) && (cap_rid.softSubVer >= 17))) { - airo_print_info(name, "WPA is supported."); + airo_print_info("", "WPA is supported."); return 1; } /* No WPA support */ - airo_print_info(name, "WPA unsupported (only firmware versions 5.30.17" + airo_print_info("", "WPA unsupported (only firmware versions 5.30.17" " and greater support WPA. Detected %s)", cap_rid.prodVer); return 0; } @@ -2825,14 +2825,10 @@ static struct net_device *_init_airo_card( unsigned short irq, int port, int i, rc; /* Create the network device object. */ - dev = alloc_etherdev(sizeof(*ai)); - if (!dev) { + dev = alloc_netdev(sizeof(*ai), "", ether_setup); + if (!dev) { airo_print_err("", "Couldn't alloc_etherdev"); return NULL; - } - if (dev_alloc_name(dev, dev->name) < 0) { - airo_print_err("", "Couldn't get name!"); - goto err_out_free; } ai = dev->priv; @@ -2841,7 +2837,7 @@ static struct net_device *_init_airo_card( unsigned short irq, int port, ai->jobs = 0; ai->dev = dev; if (pci && (pci->device == 0x5000 || pci->device == 0xa504)) { - airo_print_dbg(dev->name, "Found an MPI350 card"); + airo_print_dbg("", "Found an MPI350 card"); set_bit(FLAG_MPI, &ai->flags); } spin_lock_init(&ai->aux_lock); @@ -2882,7 +2878,7 @@ static struct net_device *_init_airo_card( unsigned short irq, int port, msleep(400); if (!is_pcmcia) { - if (!request_region( dev->base_addr, 64, dev->name )) { + if (!request_region(dev->base_addr, 64, DRV_NAME)) { rc = -EBUSY; airo_print_err(dev->name, "Couldn't request region"); goto err_out_nets; @@ -2890,8 +2886,8 @@ static struct net_device *_init_airo_card( unsigned short irq, int port, } if (test_bit(FLAG_MPI,&ai->flags)) { - if (mpi_map_card(ai, pci, dev->name)) { - airo_print_err(dev->name, "Could not map memory"); + if (mpi_map_card(ai, pci)) { + airo_print_err("", "Could not map memory"); goto err_out_res; } } @@ -2919,6 +2915,7 @@ static struct net_device *_init_airo_card( unsigned short irq, int port, ai->bssListRidLen = sizeof(BSSListRid) - sizeof(BSSListRidExtra); } + strcpy(dev->name, "eth%d"); rc = register_netdev(dev); if (rc) { airo_print_err(dev->name, "Couldn't register_netdev"); @@ -4014,7 +4011,7 @@ static int bap_setup(struct airo_info *ai, u16 rid, u16 offset, int whichbap ) } if ( !(max_tries--) ) { airo_print_err(ai->dev->name, - "airo: BAP setup error too many retries\n"); + "BAP setup error too many retries\n"); return ERROR; } // -- PC4500 missed it, try again