dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

hwmon: (lm63) Add basic support for LM64 

The LM64 appears to be an LM63 with added GPIO lines. Add support for the
hwmon functionality - GPIO can be added at some later stage if someone
has a need for them.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
This commit is contained in:
Matthew Garrett 2010-05-27 19:58:38 +02:00 committed by Jean Delvare
parent 70dd6beac0
commit 10f2ed31aa
3 changed files with 25 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
Documentation/hwmon/lm63
View File

@ -7,6 +7,11 @@ Supported chips:
Addresses scanned: I2C 0x4c
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/pf/LM/LM63.html
* National Semiconductor LM64
Prefix: 'lm64'
Addresses scanned: I2C 0x18 and 0x4e
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/pf/LM/LM64.html
Author: Jean Delvare <khali@linux-fr.org>
@ -55,3 +60,5 @@ The lm63 driver will not update its values more frequently than every
second; reading them more often will do no harm, but will return 'old'
values.
The LM64 is effectively an LM63 with GPIO lines. The driver does not
support these GPIO lines at present.

11
drivers/hwmon/Kconfig
View File

@ -447,13 +447,14 @@ config SENSORS_IT87
will be called it87.
config SENSORS_LM63
tristate "National Semiconductor LM63"
tristate "National Semiconductor LM63 and LM64"
depends on I2C
help
If you say yes here you get support for the National Semiconductor
LM63 remote diode digital temperature sensor with integrated fan
control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
motherboard, among others.
If you say yes here you get support for the National
Semiconductor LM63 and LM64 remote diode digital temperature
sensors with integrated fan control. Such chips are found
on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
others.
This driver can also be built as a module. If so, the module
will be called lm63.

16
drivers/hwmon/lm63.c
View File

@ -53,7 +53,7 @@
* Address is fully defined internally and cannot be changed.
*/
static const unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END };
static const unsigned short normal_i2c[] = { 0x18, 0x4c, 0x4e, I2C_CLIENT_END };
/*
* The LM63 registers
@ -131,12 +131,15 @@ static struct lm63_data *lm63_update_device(struct device *dev);
static int lm63_detect(struct i2c_client *client, struct i2c_board_info *info);
static void lm63_init_client(struct i2c_client *client);
enum chips { lm63, lm64 };
/*
* Driver data (common to all clients)
*/
static const struct i2c_device_id lm63_id[] = {
{ "lm63", 0 },
{ "lm63", lm63 },
{ "lm64", lm64 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm63_id);
@ -422,6 +425,7 @@ static int lm63_detect(struct i2c_client *new_client,
struct i2c_adapter *adapter = new_client->adapter;
u8 man_id, chip_id, reg_config1, reg_config2;
u8 reg_alert_status, reg_alert_mask;
int address = new_client->addr;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
@ -439,7 +443,6 @@ static int lm63_detect(struct i2c_client *new_client,
LM63_REG_ALERT_MASK);
if (man_id != 0x01 /* National Semiconductor */
|| chip_id != 0x41 /* LM63 */
|| (reg_config1 & 0x18) != 0x00
|| (reg_config2 & 0xF8) != 0x00
|| (reg_alert_status & 0x20) != 0x00
@ -450,7 +453,12 @@ static int lm63_detect(struct i2c_client *new_client,
return -ENODEV;
}
strlcpy(info->type, "lm63", I2C_NAME_SIZE);
if (chip_id == 0x41 && address == 0x4c)
strlcpy(info->type, "lm63", I2C_NAME_SIZE);
else if (chip_id == 0x51 && (address == 0x18 || address == 0x4e))
strlcpy(info->type, "lm64", I2C_NAME_SIZE);
else
return -ENODEV;
return 0;
}