diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 5ff5c4a1694..b86197286f2 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -1536,8 +1536,20 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
 		UDELAY(map, chip, adr, 1);
 	}
 
-	/* reset on all failures. */
-	map_write( map, CMD(0xF0), chip->start );
+	/*
+	 * Recovery from write-buffer programming failures requires
+	 * the write-to-buffer-reset sequence.  Since the last part
+	 * of the sequence also works as a normal reset, we can run
+	 * the same commands regardless of why we are here.
+	 * See e.g.
+	 * http://www.spansion.com/Support/Application%20Notes/MirrorBit_Write_Buffer_Prog_Page_Buffer_Read_AN.pdf
+	 */
+	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
+			 cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi,
+			 cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xF0, cfi->addr_unlock1, chip->start, map, cfi,
+			 cfi->device_type, NULL);
 	xip_enable(map, chip, adr);
 	/* FIXME - should have reset delay before continuing */