dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

Merge with /pub/scm/linux/kernel/git/torvalds/linux-2.6.git

This commit is contained in:
Steve French 2005-10-27 12:53:03 -07:00
parent d6d3f5bc68 72ab373a56
commit 04290949b3
63 changed files with 708 additions and 477 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

492
Documentation/kernel-parameters.txt
View File

@ -17,7 +17,7 @@ are specified on the kernel command line with the module name plus
usbcore.blinkenlights=1
The text in square brackets at the beginning of the description state the
The text in square brackets at the beginning of the description states the
restrictions on the kernel for the said kernel parameter to be valid. The
restrictions referred to are that the relevant option is valid if:
@ -27,8 +27,8 @@ restrictions referred to are that the relevant option is valid if:
APM Advanced Power Management support is enabled.
AX25 Appropriate AX.25 support is enabled.
CD Appropriate CD support is enabled.
DEVFS devfs support is enabled.
DRM Direct Rendering Management support is enabled.
DEVFS devfs support is enabled.
DRM Direct Rendering Management support is enabled.
EDD BIOS Enhanced Disk Drive Services (EDD) is enabled
EFI EFI Partitioning (GPT) is enabled
EIDE EIDE/ATAPI support is enabled.
@ -71,7 +71,7 @@ restrictions referred to are that the relevant option is valid if:
SERIAL Serial support is enabled.
SMP The kernel is an SMP kernel.
SPARC Sparc architecture is enabled.
SWSUSP Software suspension is enabled.
SWSUSP Software suspend is enabled.
TS Appropriate touchscreen support is enabled.
USB USB support is enabled.
USBHID USB Human Interface Device support is enabled.
@ -105,13 +105,13 @@ running once the system is up.
See header of drivers/scsi/53c7xx.c.
See also Documentation/scsi/ncr53c7xx.txt.
acpi= [HW,ACPI] Advanced Configuration and Power Interface
Format: { force | off | ht | strict }
acpi= [HW,ACPI] Advanced Configuration and Power Interface
Format: { force | off | ht | strict | noirq }
force -- enable ACPI if default was off
off -- disable ACPI if default was on
noirq -- do not use ACPI for IRQ routing
ht -- run only enough ACPI to enable Hyper Threading
strict -- Be less tolerant of platforms that are not
strict -- Be less tolerant of platforms that are not
strictly ACPI specification compliant.
See also Documentation/pm.txt, pci=noacpi
@ -119,20 +119,23 @@ running once the system is up.
acpi_sleep= [HW,ACPI] Sleep options
Format: { s3_bios, s3_mode }
See Documentation/power/video.txt
acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode
Format: { level | edge | high | low }
Format: { level | edge | high | low }
acpi_irq_balance [HW,ACPI] ACPI will balance active IRQs
default in APIC mode
acpi_irq_balance [HW,ACPI]
ACPI will balance active IRQs
default in APIC mode
acpi_irq_nobalance [HW,ACPI] ACPI will not move active IRQs (default)
default in PIC mode
acpi_irq_nobalance [HW,ACPI]
ACPI will not move active IRQs (default)
default in PIC mode
acpi_irq_pci= [HW,ACPI] If irq_balance, Clear listed IRQs for use by PCI
acpi_irq_pci= [HW,ACPI] If irq_balance, clear listed IRQs for
use by PCI
Format: <irq>,<irq>...
acpi_irq_isa= [HW,ACPI] If irq_balance, Mark listed IRQs used by ISA
acpi_irq_isa= [HW,ACPI] If irq_balance, mark listed IRQs used by ISA
Format: <irq>,<irq>...
acpi_osi= [HW,ACPI] empty param disables _OSI
@ -145,14 +148,14 @@ running once the system is up.
acpi_dbg_layer= [HW,ACPI]
Format: <int>
Each bit of the <int> indicates an acpi debug layer,
Each bit of the <int> indicates an ACPI debug layer,
1: enable, 0: disable. It is useful for boot time
debugging. After system has booted up, it can be set
via /proc/acpi/debug_layer.
acpi_dbg_level= [HW,ACPI]
Format: <int>
Each bit of the <int> indicates an acpi debug level,
Each bit of the <int> indicates an ACPI debug level,
1: enable, 0: disable. It is useful for boot time
debugging. After system has booted up, it can be set
via /proc/acpi/debug_level.
@ -161,12 +164,13 @@ running once the system is up.
acpi_generic_hotkey [HW,ACPI]
Allow consolidated generic hotkey driver to
over-ride platform specific driver.
override platform specific driver.
See also Documentation/acpi-hotkey.txt.
enable_timer_pin_1 [i386,x86-64]
Enable PIN 1 of APIC timer
Can be useful to work around chipset bugs (in particular on some ATI chipsets)
Can be useful to work around chipset bugs
(in particular on some ATI chipsets).
The kernel tries to set a reasonable default.
disable_timer_pin_1 [i386,x86-64]
@ -182,7 +186,7 @@ running once the system is up.
adlib= [HW,OSS]
Format: <io>
advansys= [HW,SCSI]
See header of drivers/scsi/advansys.c.
@ -192,7 +196,7 @@ running once the system is up.
aedsp16= [HW,OSS] Audio Excel DSP 16
Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq>
See also header of sound/oss/aedsp16.c.
aha152x= [HW,SCSI]
See Documentation/scsi/aha152x.txt.
@ -205,10 +209,6 @@ running once the system is up.
aic79xx= [HW,SCSI]
See Documentation/scsi/aic79xx.txt.
AM53C974= [HW,SCSI]
Format: <host-scsi-id>,<target-scsi-id>,<max-rate>,<max-offset>
See also header of drivers/scsi/AM53C974.c.
amijoy.map= [HW,JOY] Amiga joystick support
Map of devices attached to JOY0DAT and JOY1DAT
Format: <a>,<b>
@ -219,23 +219,24 @@ running once the system is up.
connected to one of 16 gameports
Format: <type1>,<type2>,..<type16>
apc= [HW,SPARC] Power management functions (SPARCstation-4/5 + deriv.)
apc= [HW,SPARC]
Power management functions (SPARCstation-4/5 + deriv.)
Format: noidle
Disable APC CPU standby support. SPARCstation-Fox does
not play well with APC CPU idle - disable it if you have
APC and your system crashes randomly.
apic= [APIC,i386] Change the output verbosity whilst booting
apic= [APIC,i386] Change the output verbosity whilst booting
Format: { quiet (default) | verbose | debug }
Change the amount of debugging information output
when initialising the APIC and IO-APIC components.
apm= [APM] Advanced Power Management
See header of arch/i386/kernel/apm.c.
applicom= [HW]
Format: <mem>,<irq>
arcrimi= [HW,NET] ARCnet - "RIM I" (entirely mem-mapped) cards
Format: <io>,<irq>,<nodeID>
@ -250,38 +251,40 @@ running once the system is up.
atkbd.reset= [HW] Reset keyboard during initialization
atkbd.set= [HW] Select keyboard code set
Format: <int> (2 = AT (default) 3 = PS/2)
atkbd.set= [HW] Select keyboard code set
Format: <int> (2 = AT (default), 3 = PS/2)
atkbd.scroll= [HW] Enable scroll wheel on MS Office and similar
keyboards
atkbd.softraw= [HW] Choose between synthetic and real raw mode
Format: <bool> (0 = real, 1 = synthetic (default))
atkbd.softrepeat=
[HW] Use software keyboard repeat
atkbd.softrepeat= [HW]
Use software keyboard repeat
autotest [IA64]
awe= [HW,OSS] AWE32/SB32/AWE64 wave table synth
Format: <io>,<memsize>,<isapnp>
aztcd= [HW,CD] Aztech CD268 CDROM driver
Format: <io>,0x79 (?)
baycom_epp= [HW,AX25]
Format: <io>,<mode>
baycom_par= [HW,AX25] BayCom Parallel Port AX.25 Modem
Format: <io>,<mode>
See header of drivers/net/hamradio/baycom_par.c.
baycom_ser_fdx= [HW,AX25] BayCom Serial Port AX.25 Modem (Full Duplex Mode)
baycom_ser_fdx= [HW,AX25]
BayCom Serial Port AX.25 Modem (Full Duplex Mode)
Format: <io>,<irq>,<mode>[,<baud>]
See header of drivers/net/hamradio/baycom_ser_fdx.c.
baycom_ser_hdx= [HW,AX25] BayCom Serial Port AX.25 Modem (Half Duplex Mode)
baycom_ser_hdx= [HW,AX25]
BayCom Serial Port AX.25 Modem (Half Duplex Mode)
Format: <io>,<irq>,<mode>
See header of drivers/net/hamradio/baycom_ser_hdx.c.
@ -292,7 +295,8 @@ running once the system is up.
blkmtd_count=
bttv.card= [HW,V4L] bttv (bt848 + bt878 based grabber cards)
bttv.radio= Most important insmod options are available as kernel args too.
bttv.radio= Most important insmod options are available as
kernel args too.
bttv.pll= See Documentation/video4linux/bttv/Insmod-options
bttv.tuner= and Documentation/video4linux/bttv/CARDLIST
@ -318,15 +322,17 @@ running once the system is up.
checkreqprot [SELINUX] Set initial checkreqprot flag value.
Format: { "0" | "1" }
See security/selinux/Kconfig help text.
0 -- check protection applied by kernel (includes any implied execute protection).
0 -- check protection applied by kernel (includes
any implied execute protection).
1 -- check protection requested by application.
Default value is set via a kernel config option.
Value can be changed at runtime via /selinux/checkreqprot.
clock= [BUGS=IA-32, HW] gettimeofday timesource override.
Value can be changed at runtime via
/selinux/checkreqprot.
clock= [BUGS=IA-32,HW] gettimeofday timesource override.
Forces specified timesource (if avaliable) to be used
when calculating gettimeofday(). If specicified timesource
is not avalible, it defaults to PIT.
when calculating gettimeofday(). If specicified
timesource is not avalible, it defaults to PIT.
Format: { pit | tsc | cyclone | pmtmr }
hpet= [IA-32,HPET] option to disable HPET and use PIT.
@ -336,17 +342,19 @@ running once the system is up.
Format: { auto | [<io>,][<irq>] }
com20020= [HW,NET] ARCnet - COM20020 chipset
Format: <io>[,<irq>[,<nodeID>[,<backplane>[,<ckp>[,<timeout>]]]]]
Format:
<io>[,<irq>[,<nodeID>[,<backplane>[,<ckp>[,<timeout>]]]]]
com90io= [HW,NET] ARCnet - COM90xx chipset (IO-mapped buffers)
Format: <io>[,<irq>]
com90xx= [HW,NET] ARCnet - COM90xx chipset (memory-mapped buffers)
com90xx= [HW,NET]
ARCnet - COM90xx chipset (memory-mapped buffers)
Format: <io>[,<irq>[,<memstart>]]
condev= [HW,S390] console device
conmode=
console= [KNL] Output console device and options.
tty<n> Use the virtual console device <n>.
@ -367,7 +375,8 @@ running once the system is up.
options are the same as for ttyS, above.
cpcihp_generic= [HW,PCI] Generic port I/O CompactPCI driver
Format: <first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
Format:
<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
cpia_pp= [HW,PPT]
Format: { parport<nr> | auto | none }
@ -384,10 +393,10 @@ running once the system is up.
cs89x0_media= [HW,NET]
Format: { rj45 | aui | bnc }
cyclades= [HW,SERIAL] Cyclades multi-serial port adapter.
dasd= [HW,NET]
dasd= [HW,NET]
See header of drivers/s390/block/dasd_devmap.c.
db9.dev[2|3]= [HW,JOY] Multisystem joystick support via parallel port
@ -406,7 +415,7 @@ running once the system is up.
dhash_entries= [KNL]
Set number of hash buckets for dentry cache.
digi= [HW,SERIAL]
IO parameters + enable/disable command.
@ -424,11 +433,11 @@ running once the system is up.
dtc3181e= [HW,SCSI]
earlyprintk= [IA-32, X86-64]
earlyprintk= [IA-32,X86-64]
earlyprintk=vga
earlyprintk=serial[,ttySn[,baudrate]]
Append ,keep to not disable it when the real console
Append ",keep" to not disable it when the real console
takes over.
Only vga or serial at a time, not both.
@ -451,7 +460,7 @@ running once the system is up.
Format: {"of[f]" | "sk[ipmbr]"}
See comment in arch/i386/boot/edd.S
eicon= [HW,ISDN]
eicon= [HW,ISDN]
Format: <id>,<membase>,<irq>
eisa_irq_edge= [PARISC,HW]
@ -462,12 +471,13 @@ running once the system is up.
arch/i386/kernel/cpu/cpufreq/elanfreq.c.
elevator= [IOSCHED]
Format: {"as"|"cfq"|"deadline"|"noop"}
See Documentation/block/as-iosched.txt
and Documentation/block/deadline-iosched.txt for details.
Format: {"as" | "cfq" | "deadline" | "noop"}
See Documentation/block/as-iosched.txt and
Documentation/block/deadline-iosched.txt for details.
elfcorehdr= [IA-32]
Specifies physical address of start of kernel core image
elf header.
Specifies physical address of start of kernel core
image elf header.
See Documentation/kdump.txt for details.
enforcing [SELINUX] Set initial enforcing status.
@ -485,7 +495,7 @@ running once the system is up.
es1371= [HW,OSS]
Format: <spdif>,[<nomix>,[<amplifier>]]
See also header of sound/oss/es1371.c.
ether= [HW,NET] Ethernet cards parameters
This option is obsoleted by the "netdev=" option, which
has equivalent usage. See its documentation for details.
@ -526,12 +536,13 @@ running once the system is up.
gus= [HW,OSS]
Format: <io>,<irq>,<dma>,<dma16>
gvp11= [HW,SCSI]
hashdist= [KNL,NUMA] Large hashes allocated during boot
are distributed across NUMA nodes. Defaults on
for IA-64, off otherwise.
Format: 0 | 1 (for off | on)
hcl= [IA-64] SGI's Hardware Graph compatibility layer
@ -595,13 +606,13 @@ running once the system is up.
ide?= [HW] (E)IDE subsystem
Format: ide?=noprobe or chipset specific parameters.
See Documentation/ide.txt.
idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed
See Documentation/ide.txt.
idle= [HW]
Format: idle=poll or idle=halt
ihash_entries= [KNL]
Set number of hash buckets for inode cache.
@ -649,7 +660,7 @@ running once the system is up.
firmware running.
isapnp= [ISAPNP]
Format: <RDP>, <reset>, <pci_scan>, <verbosity>
Format: <RDP>,<reset>,<pci_scan>,<verbosity>
isolcpus= [KNL,SMP] Isolate CPUs from the general scheduler.
Format: <cpu number>,...,<cpu number>
@ -661,32 +672,33 @@ running once the system is up.
"number of CPUs in system - 1".
This option is the preferred way to isolate CPUs. The
alternative - manually setting the CPU mask of all tasks
in the system can cause problems and suboptimal load
balancer performance.
alternative -- manually setting the CPU mask of all
tasks in the system -- can cause problems and
suboptimal load balancer performance.
isp16= [HW,CD]
Format: <io>,<irq>,<dma>,<setup>
iucv= [HW,NET]
iucv= [HW,NET]
js= [HW,JOY] Analog joystick
See Documentation/input/joystick.txt.
keepinitrd [HW,ARM]
kstack=N [IA-32, X86-64] Print N words from the kernel stack
kstack=N [IA-32,X86-64] Print N words from the kernel stack
in oops dumps.
l2cr= [PPC]
lapic [IA-32,APIC] Enable the local APIC even if BIOS disabled it.
lapic [IA-32,APIC] Enable the local APIC even if BIOS
disabled it.
lasi= [HW,SCSI] PARISC LASI driver for the 53c700 chip
Format: addr:<io>,irq:<irq>
llsc*= [IA64]
See function print_params() in arch/ia64/sn/kernel/llsc4.c.
llsc*= [IA64] See function print_params() in
arch/ia64/sn/kernel/llsc4.c.
load_ramdisk= [RAM] List of ramdisks to load from floppy
See Documentation/ramdisk.txt.
@ -713,8 +725,9 @@ running once the system is up.
7 (KERN_DEBUG) debug-level messages
log_buf_len=n Sets the size of the printk ring buffer, in bytes.
Format is n, nk, nM. n must be a power of two. The
default is set in kernel config.
Format: { n | nk | nM }
n must be a power of two. The default size
is set in the kernel config file.
lp=0 [LP] Specify parallel ports to use, e.g,
lp=port[,port...] lp=none,parport0 (lp0 not configured, lp1 uses
@ -750,23 +763,23 @@ running once the system is up.
ltpc= [NET]
Format: <io>,<irq>,<dma>
mac5380= [HW,SCSI]
Format: <can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
mac5380= [HW,SCSI] Format:
<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
mac53c9x= [HW,SCSI]
Format: <num_esps>,<disconnect>,<nosync>,<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
mac53c9x= [HW,SCSI] Format:
<num_esps>,<disconnect>,<nosync>,<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
machvec= [IA64]
Force the use of a particular machine-vector (machvec) in a generic
kernel. Example: machvec=hpzx1_swiotlb
machvec= [IA64] Force the use of a particular machine-vector
(machvec) in a generic kernel.
Example: machvec=hpzx1_swiotlb
mad16= [HW,OSS]
Format: <io>,<irq>,<dma>,<dma16>,<mpu_io>,<mpu_irq>,<joystick>
mad16= [HW,OSS] Format:
<io>,<irq>,<dma>,<dma16>,<mpu_io>,<mpu_irq>,<joystick>
maui= [HW,OSS]
Format: <io>,<irq>
max_loop= [LOOP] Maximum number of loopback devices that can
max_loop= [LOOP] Maximum number of loopback devices that can
be mounted
Format: <1-256>
@ -776,11 +789,11 @@ running once the system is up.
max_addr=[KMG] [KNL,BOOT,ia64] All physical memory greater than or
equal to this physical address is ignored.
max_luns= [SCSI] Maximum number of LUNs to probe
max_luns= [SCSI] Maximum number of LUNs to probe.
Should be between 1 and 2^32-1.
max_report_luns=
[SCSI] Maximum number of LUNs received
[SCSI] Maximum number of LUNs received.
Should be between 1 and 16384.
mca-pentium [BUGS=IA-32]
@ -796,11 +809,11 @@ running once the system is up.
md= [HW] RAID subsystems devices and level
See Documentation/md.txt.
mdacon= [MDA]
Format: <first>,<last>
Specifies range of consoles to be captured by the MDA.
mem=nn[KMG] [KNL,BOOT] Force usage of a specific amount of memory
Amount of memory to be used when the kernel is not able
to see the whole system memory or for test.
@ -851,15 +864,15 @@ running once the system is up.
MTD_Partition= [MTD]
Format: <name>,<region-number>,<size>,<offset>
MTD_Region= [MTD]
Format: <name>,<region-number>[,<base>,<size>,<buswidth>,<altbuswidth>]
MTD_Region= [MTD] Format:
<name>,<region-number>[,<base>,<size>,<buswidth>,<altbuswidth>]
mtdparts= [MTD]
See drivers/mtd/cmdline.c.
mtouchusb.raw_coordinates=
[HW] Make the MicroTouch USB driver use raw coordinates ('y', default)
or cooked coordinates ('n')
[HW] Make the MicroTouch USB driver use raw coordinates
('y', default) or cooked coordinates ('n')
n2= [NET] SDL Inc. RISCom/N2 synchronous serial card
@ -880,7 +893,9 @@ running once the system is up.
Format: <irq>,<io>,<mem_start>,<mem_end>,<name>
Note that mem_start is often overloaded to mean
something different and driver-specific.
This usage is only documented in each driver source
file if at all.
nfsaddrs= [NFS]
See Documentation/nfsroot.txt.
@ -893,8 +908,8 @@ running once the system is up.
emulation library even if a 387 maths coprocessor
is present.
noalign [KNL,ARM]
noalign [KNL,ARM]
noapic [SMP,APIC] Tells the kernel to not make use of any
IOAPICs that may be present in the system.
@ -905,19 +920,19 @@ running once the system is up.
on "Classic" PPC cores.
nocache [ARM]
nodisconnect [HW,SCSI,M68K] Disables SCSI disconnects.
noexec [IA-64]
noexec [IA-32, X86-64]
noexec [IA-32,X86-64]
noexec=on: enable non-executable mappings (default)
noexec=off: disable nn-executable mappings
nofxsr [BUGS=IA-32]
nohlt [BUGS=ARM]
no-hlt [BUGS=IA-32] Tells the kernel that the hlt
instruction doesn't work correctly and not to
use it.
@ -948,8 +963,9 @@ running once the system is up.
noresidual [PPC] Don't use residual data on PReP machines.
noresume [SWSUSP] Disables resume and restore original swap space.
noresume [SWSUSP] Disables resume and restores original swap
space.
no-scroll [VGA] Disables scrollback.
This is required for the Braillex ib80-piezo Braille
reader made by F.H. Papenmeier (Germany).
@ -965,16 +981,16 @@ running once the system is up.
nousb [USB] Disable the USB subsystem
nowb [ARM]
opl3= [HW,OSS]
Format: <io>
opl3sa= [HW,OSS]
Format: <io>,<irq>,<dma>,<dma2>,<mpu_io>,<mpu_irq>
opl3sa2= [HW,OSS]
Format: <io>,<irq>,<dma>,<dma2>,<mss_io>,<mpu_io>,<ymode>,<loopback>[,<isapnp>,<multiple]
opl3sa2= [HW,OSS] Format:
<io>,<irq>,<dma>,<dma2>,<mss_io>,<mpu_io>,<ymode>,<loopback>[,<isapnp>,<multiple]
oprofile.timer= [HW]
Use timer interrupt instead of performance counters
@ -993,36 +1009,33 @@ running once the system is up.
Format: <parport#>
parkbd.mode= [HW] Parallel port keyboard adapter mode of operation,
0 for XT, 1 for AT (default is AT).
Format: <mode>
Format: <mode>
parport=0 [HW,PPT] Specify parallel ports. 0 disables.
parport=auto Use 'auto' to force the driver to use
parport=0xBBB[,IRQ[,DMA]] any IRQ/DMA settings detected (the
default is to ignore detected IRQ/DMA
settings because of possible
conflicts). You can specify the base
address, IRQ, and DMA settings; IRQ and
DMA should be numbers, or 'auto' (for
using detected settings on that
particular port), or 'nofifo' (to avoid
using a FIFO even if it is detected).
Parallel ports are assigned in the
order they are specified on the command
line, starting with parport0.
parport= [HW,PPT] Specify parallel ports. 0 disables.
Format: { 0 | auto | 0xBBB[,IRQ[,DMA]] }
Use 'auto' to force the driver to use any
IRQ/DMA settings detected (the default is to
ignore detected IRQ/DMA settings because of
possible conflicts). You can specify the base
address, IRQ, and DMA settings; IRQ and DMA
should be numbers, or 'auto' (for using detected
settings on that particular port), or 'nofifo'
(to avoid using a FIFO even if it is detected).
Parallel ports are assigned in the order they
are specified on the command line, starting
with parport0.
parport_init_mode=
[HW,PPT] Configure VIA parallel port to
operate in specific mode. This is
necessary on Pegasos computer where
firmware has no options for setting up
parallel port mode and sets it to
spp. Currently this function knows
686a and 8231 chips.
parport_init_mode= [HW,PPT]
Configure VIA parallel port to operate in
a specific mode. This is necessary on Pegasos
computer where firmware has no options for setting
up parallel port mode and sets it to spp.
Currently this function knows 686a and 8231 chips.
Format: [spp|ps2|epp|ecp|ecpepp]
pas2= [HW,OSS]
Format: <io>,<irq>,<dma>,<dma16>,<sb_io>,<sb_irq>,<sb_dma>,<sb_dma16>
pas2= [HW,OSS] Format:
<io>,<irq>,<dma>,<dma16>,<sb_io>,<sb_irq>,<sb_dma>,<sb_dma16>
pas16= [HW,SCSI]
See header of drivers/scsi/pas16.c.
@ -1032,64 +1045,67 @@ running once the system is up.
See header of drivers/block/paride/pcd.c.
See also Documentation/paride.txt.
pci=option[,option...] [PCI] various PCI subsystem options:
off [IA-32] don't probe for the PCI bus
bios [IA-32] force use of PCI BIOS, don't access
the hardware directly. Use this if your machine
has a non-standard PCI host bridge.
nobios [IA-32] disallow use of PCI BIOS, only direct
hardware access methods are allowed. Use this
if you experience crashes upon bootup and you
suspect they are caused by the BIOS.
conf1 [IA-32] Force use of PCI Configuration Mechanism 1.
conf2 [IA-32] Force use of PCI Configuration Mechanism 2.
nosort [IA-32] Don't sort PCI devices according to
order given by the PCI BIOS. This sorting is done
to get a device order compatible with older kernels.
biosirq [IA-32] Use PCI BIOS calls to get the interrupt
routing table. These calls are known to be buggy
on several machines and they hang the machine when used,
but on other computers it's the only way to get the
interrupt routing table. Try this option if the kernel
is unable to allocate IRQs or discover secondary PCI
buses on your motherboard.
rom [IA-32] Assign address space to expansion ROMs.
Use with caution as certain devices share address
decoders between ROMs and other resources.
irqmask=0xMMMM [IA-32] Set a bit mask of IRQs allowed to be assigned
automatically to PCI devices. You can make the kernel
exclude IRQs of your ISA cards this way.
pci=option[,option...] [PCI] various PCI subsystem options:
off [IA-32] don't probe for the PCI bus
bios [IA-32] force use of PCI BIOS, don't access
the hardware directly. Use this if your machine
has a non-standard PCI host bridge.
nobios [IA-32] disallow use of PCI BIOS, only direct
hardware access methods are allowed. Use this
if you experience crashes upon bootup and you
suspect they are caused by the BIOS.
conf1 [IA-32] Force use of PCI Configuration
Mechanism 1.
conf2 [IA-32] Force use of PCI Configuration
Mechanism 2.
nosort [IA-32] Don't sort PCI devices according to
order given by the PCI BIOS. This sorting is
done to get a device order compatible with
older kernels.
biosirq [IA-32] Use PCI BIOS calls to get the interrupt
routing table. These calls are known to be buggy
on several machines and they hang the machine
when used, but on other computers it's the only
way to get the interrupt routing table. Try
this option if the kernel is unable to allocate
IRQs or discover secondary PCI buses on your
motherboard.
rom [IA-32] Assign address space to expansion ROMs.
Use with caution as certain devices share
address decoders between ROMs and other
resources.
irqmask=0xMMMM [IA-32] Set a bit mask of IRQs allowed to be
assigned automatically to PCI devices. You can
make the kernel exclude IRQs of your ISA cards
this way.
pirqaddr=0xAAAAA [IA-32] Specify the physical address
of the PIRQ table (normally generated
by the BIOS) if it is outside the
F0000h-100000h range.
lastbus=N [IA-32] Scan all buses till bus #N. Can be useful
if the kernel is unable to find your secondary buses
and you want to tell it explicitly which ones they are.
assign-busses [IA-32] Always assign all PCI bus
numbers ourselves, overriding
whatever the firmware may have
done.
usepirqmask [IA-32] Honor the possible IRQ mask
stored in the BIOS $PIR table. This is
needed on some systems with broken
BIOSes, notably some HP Pavilion N5400
and Omnibook XE3 notebooks. This will
have no effect if ACPI IRQ routing is
enabled.
noacpi [IA-32] Do not use ACPI for IRQ routing
or for PCI scanning.
routeirq Do IRQ routing for all PCI devices.
This is normally done in pci_enable_device(),
so this option is a temporary workaround
for broken drivers that don't call it.
firmware [ARM] Do not re-enumerate the bus but
instead just use the configuration
from the bootloader. This is currently
used on IXP2000 systems where the
bus has to be configured a certain way
for adjunct CPUs.
of the PIRQ table (normally generated
by the BIOS) if it is outside the
F0000h-100000h range.
lastbus=N [IA-32] Scan all buses thru bus #N. Can be
useful if the kernel is unable to find your
secondary buses and you want to tell it
explicitly which ones they are.
assign-busses [IA-32] Always assign all PCI bus
numbers ourselves, overriding
whatever the firmware may have done.
usepirqmask [IA-32] Honor the possible IRQ mask stored
in the BIOS $PIR table. This is needed on
some systems with broken BIOSes, notably
some HP Pavilion N5400 and Omnibook XE3
notebooks. This will have no effect if ACPI
IRQ routing is enabled.
noacpi [IA-32] Do not use ACPI for IRQ routing
or for PCI scanning.
routeirq Do IRQ routing for all PCI devices.
This is normally done in pci_enable_device(),
so this option is a temporary workaround
for broken drivers that don't call it.
firmware [ARM] Do not re-enumerate the bus but instead
just use the configuration from the
bootloader. This is currently used on
IXP2000 systems where the bus has to be
configured a certain way for adjunct CPUs.
pcmv= [HW,PCMCIA] BadgePAD 4
@ -1127,19 +1143,20 @@ running once the system is up.
[ISAPNP] Exclude DMAs for the autoconfiguration
pnp_reserve_io= [ISAPNP] Exclude I/O ports for the autoconfiguration
Ranges are in pairs (I/O port base and size).
Ranges are in pairs (I/O port base and size).
pnp_reserve_mem=
[ISAPNP] Exclude memory regions for the autoconfiguration
[ISAPNP] Exclude memory regions for the
autoconfiguration.
Ranges are in pairs (memory base and size).
profile= [KNL] Enable kernel profiling via /proc/profile
{ schedule | <number> }
(param: schedule - profile schedule points}
(param: profile step/bucket size as a power of 2 for
statistical time based profiling)
Format: [schedule,]<number>
Param: "schedule" - profile schedule points.
Param: <number> - step/bucket size as a power of 2 for
statistical time based profiling.
processor.max_cstate= [HW, ACPI]
processor.max_cstate= [HW,ACPI]
Limit processor to maximum C-state
max_cstate=9 overrides any DMI blacklist limit.
@ -1147,27 +1164,28 @@ running once the system is up.
before loading.
See Documentation/ramdisk.txt.
psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to
probe for (bare|imps|exps|lifebook|any).
psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to
probe for; one of (bare|imps|exps|lifebook|any).
psmouse.rate= [HW,MOUSE] Set desired mouse report rate, in reports
per second.
psmouse.resetafter=
[HW,MOUSE] Try to reset the device after so many bad packets
psmouse.resetafter= [HW,MOUSE]
Try to reset the device after so many bad packets
(0 = never).
psmouse.resolution=
[HW,MOUSE] Set desired mouse resolution, in dpi.
psmouse.smartscroll=
[HW,MOUSE] Controls Logitech smartscroll autorepeat,
[HW,MOUSE] Controls Logitech smartscroll autorepeat.
0 = disabled, 1 = enabled (default).
pss= [HW,OSS] Personal Sound System (ECHO ESC614)
Format: <io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq>
Format:
<io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq>
pt. [PARIDE]
See Documentation/paride.txt.
quiet= [KNL] Disable log messages
r128= [HW,DRM]
raid= [HW,RAID]
@ -1176,10 +1194,9 @@ running once the system is up.
ramdisk= [RAM] Sizes of RAM disks in kilobytes [deprecated]
See Documentation/ramdisk.txt.
ramdisk_blocksize=
[RAM]
ramdisk_blocksize= [RAM]
See Documentation/ramdisk.txt.
ramdisk_size= [RAM] Sizes of RAM disks in kilobytes
New name for the ramdisk parameter.
See Documentation/ramdisk.txt.
@ -1195,7 +1212,8 @@ running once the system is up.
reserve= [KNL,BUGS] Force the kernel to ignore some iomem area
resume= [SWSUSP] Specify the partition device for software suspension
resume= [SWSUSP]
Specify the partition device for software suspend
rhash_entries= [KNL,NET]
Set number of hash buckets for route cache
@ -1225,7 +1243,7 @@ running once the system is up.
Format: <io>,<irq>,<dma>,<dma2>
sbni= [NET] Granch SBNI12 leased line adapter
sbpcd= [HW,CD] Soundblaster CD adapter
Format: <io>,<type>
See a comment before function sbpcd_setup() in
@ -1258,21 +1276,20 @@ running once the system is up.
serialnumber [BUGS=IA-32]
sg_def_reserved_size=
[SCSI]
sg_def_reserved_size= [SCSI]
sgalaxy= [HW,OSS]
Format: <io>,<irq>,<dma>,<dma2>,<sgbase>
shapers= [NET]
Maximal number of shapers.
sim710= [SCSI,HW]
See header of drivers/scsi/sim710.c.
simeth= [IA-64]
simscsi=
sjcd= [HW,CD]
Format: <io>,<irq>,<dma>
See header of drivers/cdrom/sjcd.c.
@ -1403,10 +1420,10 @@ running once the system is up.
snd-wavefront= [HW,ALSA]
snd-ymfpci= [HW,ALSA]
sonicvibes= [HW,OSS]
Format: <reverb>
sonycd535= [HW,CD]
Format: <io>[,<irq>]
@ -1423,7 +1440,7 @@ running once the system is up.
sscape= [HW,OSS]
Format: <io>,<irq>,<dma>,<mpu_io>,<mpu_irq>
st= [HW,SCSI] SCSI tape parameters (buffers, etc.)
See Documentation/scsi/st.txt.
@ -1446,7 +1463,7 @@ running once the system is up.
stram_swap= [HW,M68k]
swiotlb= [IA-64] Number of I/O TLB slabs
switches= [HW,M68k]
sym53c416= [HW,SCSI]
@ -1479,14 +1496,16 @@ running once the system is up.
tp720= [HW,PS2]
trix= [HW,OSS] MediaTrix AudioTrix Pro
Format: <io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
Format:
<io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
tsdev.xres= [TS] Horizontal screen resolution.
tsdev.yres= [TS] Vertical screen resolution.
turbografx.map[2|3]=
[HW,JOY] TurboGraFX parallel port interface
Format: <port#>,<js1>,<js2>,<js3>,<js4>,<js5>,<js6>,<js7>
turbografx.map[2|3]= [HW,JOY]
TurboGraFX parallel port interface
Format:
<port#>,<js1>,<js2>,<js3>,<js4>,<js5>,<js6>,<js7>
See also Documentation/input/joystick-parport.txt
u14-34f= [HW,SCSI] UltraStor 14F/34F SCSI host adapter
@ -1502,17 +1521,18 @@ running once the system is up.
usbhid.mousepoll=
[USBHID] The interval which mice are to be polled at.
video= [FB] Frame buffer configuration
See Documentation/fb/modedb.txt.
vga= [BOOT,IA-32] Select a particular video mode
See Documentation/i386/boot.txt and Documentation/svga.txt.
See Documentation/i386/boot.txt and
Documentation/svga.txt.
Use vga=ask for menu.
This is actually a boot loader parameter; the value is
passed to the kernel using a special protocol.
vmalloc=nn[KMG] [KNL,BOOT] forces the vmalloc area to have an exact
vmalloc=nn[KMG] [KNL,BOOT] Forces the vmalloc area to have an exact
size of <nn>. This can be used to increase the
minimum size (128MB on x86). It can also be used to
decrease the size and leave more room for directly
@ -1520,11 +1540,11 @@ running once the system is up.
vmhalt= [KNL,S390]
vmpoff= [KNL,S390]
vmpoff= [KNL,S390]
waveartist= [HW,OSS]
Format: <io>,<irq>,<dma>,<dma2>
wd33c93= [HW,SCSI]
See header of drivers/scsi/wd33c93.c.
@ -1538,21 +1558,25 @@ running once the system is up.
xd_geo= See header of drivers/block/xd.c.
xirc2ps_cs= [NET,PCMCIA]
Format: <irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
Format:
<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
______________________________________________________________________
Changelog:
2000-06-?? Mr. Unknown
The last known update (for 2.4.0) - the changelog was not kept before.
2000-06-?? Mr. Unknown
2002-11-24 Petr Baudis <pasky@ucw.cz>
Randy Dunlap <randy.dunlap@verizon.net>
Update for 2.5.49, description for most of the options introduced,
references to other documentation (C files, READMEs, ..), added S390,
PPC, SPARC, MTD, ALSA and OSS category. Minor corrections and
reformatting.
2002-11-24 Petr Baudis <pasky@ucw.cz>
Randy Dunlap <randy.dunlap@verizon.net>
2005-10-19 Randy Dunlap <rdunlap@xenotime.net>
Lots of typos, whitespace, some reformatting.
TODO:

15
arch/arm/mach-integrator/impd1.c
View File

@ -67,7 +67,7 @@ static void impd1_setvco(struct clk *clk, struct icst525_vco vco)
}
writel(0, impd1->base + IMPD1_LOCK);
#if DEBUG
#ifdef DEBUG
vco.v = val & 0x1ff;
vco.r = (val >> 9) & 0x7f;
vco.s = (val >> 16) & 7;
@ -427,17 +427,18 @@ static int impd1_probe(struct lm_device *dev)
return ret;
}
static int impd1_remove_one(struct device *dev, void *data)
{
device_unregister(dev);
return 0;
}
static void impd1_remove(struct lm_device *dev)
{
struct impd1_module *impd1 = lm_get_drvdata(dev);
struct list_head *l, *n;
int i;
list_for_each_safe(l, n, &dev->dev.children) {
struct device *d = list_to_dev(l);
device_unregister(d);
}
device_for_each_child(&dev->dev, NULL, impd1_remove_one);
for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++)
clk_unregister(&impd1->vcos[i]);

2
arch/arm/mach-pxa/corgi_lcd.c
View File

@ -488,6 +488,7 @@ static int is_pxafb_device(struct device * dev, void * data)
unsigned long spitz_get_hsync_len(void)
{
#ifdef CONFIG_FB_PXA
if (!spitz_pxafb_dev) {
spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
if (!spitz_pxafb_dev)
@ -496,6 +497,7 @@ unsigned long spitz_get_hsync_len(void)
if (!get_hsync_time)
get_hsync_time = symbol_get(pxafb_get_hsync_time);
if (!get_hsync_time)
#endif
return 0;
return pxafb_get_hsync_time(spitz_pxafb_dev);

20
arch/arm/mach-pxa/generic.c
View File

@ -250,6 +250,25 @@ void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
i2c_device.dev.platform_data = info;
}
static struct resource i2s_resources[] = {
{
.start = 0x40400000,
.end = 0x40400083,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_I2S,
.end = IRQ_I2S,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device i2s_device = {
.name = "pxa2xx-i2s",
.id = -1,
.resource = i2c_resources,
.num_resources = ARRAY_SIZE(i2s_resources),
};
static struct platform_device *devices[] __initdata = {
&pxamci_device,
&udc_device,
@ -258,6 +277,7 @@ static struct platform_device *devices[] __initdata = {
&btuart_device,
&stuart_device,
&i2c_device,
&i2s_device,
};
static int __init pxa_init(void)

6
arch/arm/mach-s3c2410/mach-bast.c
View File

@ -307,9 +307,9 @@ static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
}
static struct s3c2410_platform_nand bast_nand_info = {
.tacls = 40,
.twrph0 = 80,
.twrph1 = 80,
.tacls = 30,
.twrph0 = 60,
.twrph1 = 60,
.nr_sets = ARRAY_SIZE(bast_nand_sets),
.sets = bast_nand_sets,
.select_chip = bast_nand_select,

30
arch/i386/kernel/cpu/cpufreq/powernow-k8.c
View File

@ -44,7 +44,7 @@
#define PFX "powernow-k8: "
#define BFX PFX "BIOS error: "
#define VERSION "version 1.50.3"
#define VERSION "version 1.50.4"
#include "powernow-k8.h"
/* serialize freq changes */
@ -111,8 +111,8 @@ static int query_current_values_with_pending_wait(struct powernow_k8_data *data)
u32 i = 0;
do {
if (i++ > 0x1000000) {
printk(KERN_ERR PFX "detected change pending stuck\n");
if (i++ > 10000) {
dprintk("detected change pending stuck\n");
return 1;
}
rdmsr(MSR_FIDVID_STATUS, lo, hi);
@ -159,6 +159,7 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid)
{
u32 lo;
u32 savevid = data->currvid;
u32 i = 0;
if ((fid & INVALID_FID_MASK) || (data->currvid & INVALID_VID_MASK)) {
printk(KERN_ERR PFX "internal error - overflow on fid write\n");
@ -170,10 +171,13 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid)
dprintk("writing fid 0x%x, lo 0x%x, hi 0x%x\n",
fid, lo, data->plllock * PLL_LOCK_CONVERSION);
wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION);
if (query_current_values_with_pending_wait(data))
return 1;
do {
wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION);
if (i++ > 100) {
printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n");
return 1;
}
} while (query_current_values_with_pending_wait(data));
count_off_irt(data);
@ -197,6 +201,7 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid)
{
u32 lo;
u32 savefid = data->currfid;
int i = 0;
if ((data->currfid & INVALID_FID_MASK) || (vid & INVALID_VID_MASK)) {
printk(KERN_ERR PFX "internal error - overflow on vid write\n");
@ -208,10 +213,13 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid)
dprintk("writing vid 0x%x, lo 0x%x, hi 0x%x\n",
vid, lo, STOP_GRANT_5NS);
wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS);
if (query_current_values_with_pending_wait(data))
return 1;
do {
wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS);
if (i++ > 100) {
printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n");
return 1;
}
} while (query_current_values_with_pending_wait(data));
if (savefid != data->currfid) {
printk(KERN_ERR PFX "fid changed on vid trans, old 0x%x new 0x%x\n",

2
arch/ppc64/kernel/iSeries_htab.c
View File

@ -66,7 +66,7 @@ static long iSeries_hpte_insert(unsigned long hpte_group, unsigned long va,
}
if (slot < 0) { /* MSB set means secondary group */
vflags |= HPTE_V_VALID;
vflags |= HPTE_V_SECONDARY;
secondary = 1;
slot &= 0x7fffffffffffffff;
}

4
arch/ppc64/kernel/mpic.c
View File

@ -506,8 +506,8 @@ struct mpic * __init mpic_alloc(unsigned long phys_addr,
mpic->senses_count = senses_count;
/* Map the global registers */
mpic->gregs = ioremap(phys_addr + MPIC_GREG_BASE, 0x1000);
mpic->tmregs = mpic->gregs + (MPIC_TIMER_BASE >> 2);
mpic->gregs = ioremap(phys_addr + MPIC_GREG_BASE, 0x2000);
mpic->tmregs = mpic->gregs + ((MPIC_TIMER_BASE - MPIC_GREG_BASE) >> 2);
BUG_ON(mpic->gregs == NULL);
/* Reset */

2
arch/ppc64/kernel/time.c
View File

@ -870,7 +870,7 @@ void div128_by_32( unsigned long dividend_high, unsigned long dividend_low,
rb = ((ra + b) - (x * divisor)) << 32;
y = (rb + c)/divisor;
rc = ((rb + b) - (y * divisor)) << 32;
rc = ((rb + c) - (y * divisor)) << 32;
z = (rc + d)/divisor;

3
arch/ppc64/mm/init.c
View File

@ -799,8 +799,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long ea,
if (cpus_equal(vma->vm_mm->cpu_vm_mask, tmp))
local = 1;
__hash_page(ea, pte_val(pte) & (_PAGE_USER|_PAGE_RW), vsid, ptep,
0x300, local);
__hash_page(ea, 0, vsid, ptep, 0x300, local);
local_irq_restore(flags);
}

2
arch/um/include/sysdep-i386/thread.h
View File

@ -4,7 +4,7 @@
#include <kern_constants.h>
#define TASK_DEBUGREGS(task) ((unsigned long *) &(((char *) (task))[HOST_TASK_DEBUGREGS]))
#ifdef CONFIG_MODE_TT
#ifdef UML_CONFIG_MODE_TT
#define TASK_EXTERN_PID(task) *((int *) &(((char *) (task))[HOST_TASK_EXTERN_PID]))
#endif

2
arch/um/include/sysdep-x86_64/thread.h
View File

@ -3,7 +3,7 @@
#include <kern_constants.h>
#ifdef CONFIG_MODE_TT
#ifdef UML_CONFIG_MODE_TT
#define TASK_EXTERN_PID(task) *((int *) &(((char *) (task))[HOST_TASK_EXTERN_PID]))
#endif

3
drivers/char/drm/drm_vm.c
View File

@ -148,7 +148,8 @@ static __inline__ struct page *drm_do_vm_shm_nopage(struct vm_area_struct *vma,
offset = address - vma->vm_start;
i = (unsigned long)map->handle + offset;
page = vmalloc_to_page((void *)i);
page = (map->type == _DRM_CONSISTENT) ?
virt_to_page((void *)i) : vmalloc_to_page((void *)i);
if (!page)
return NOPAGE_OOM;
get_page(page);

2
drivers/char/drm/mga_drv.h
View File

@ -227,7 +227,7 @@ static inline u32 _MGA_READ(u32 *addr)
#define MGA_EMIT_STATE( dev_priv, dirty ) \
do { \
if ( (dirty) & ~MGA_UPLOAD_CLIPRECTS ) { \
if ( dev_priv->chipset == MGA_CARD_TYPE_G400 ) { \
if ( dev_priv->chipset >= MGA_CARD_TYPE_G400 ) { \
mga_g400_emit_state( dev_priv ); \
} else { \
mga_g200_emit_state( dev_priv ); \

2
drivers/char/drm/mga_state.c
View File

@ -53,7 +53,7 @@ static void mga_emit_clip_rect( drm_mga_private_t *dev_priv,
/* Force reset of DWGCTL on G400 (eliminates clip disable bit).
*/
if (dev_priv->chipset == MGA_CARD_TYPE_G400) {
if (dev_priv->chipset >= MGA_CARD_TYPE_G400) {
DMA_BLOCK(MGA_DWGCTL, ctx->dwgctl,
MGA_LEN + MGA_EXEC, 0x80000000,
MGA_DWGCTL, ctx->dwgctl,

11
drivers/char/drm/radeon_cp.c
View File

@ -1133,10 +1133,10 @@ static void radeon_cp_init_ring_buffer( drm_device_t *dev,
ring_start = (dev_priv->cp_ring->offset
- dev->agp->base
+ dev_priv->gart_vm_start);
} else
} else
#endif
ring_start = (dev_priv->cp_ring->offset
- dev->sg->handle
- (unsigned long)dev->sg->virtual
+ dev_priv->gart_vm_start);
RADEON_WRITE( RADEON_CP_RB_BASE, ring_start );
@ -1164,7 +1164,8 @@ static void radeon_cp_init_ring_buffer( drm_device_t *dev,
drm_sg_mem_t *entry = dev->sg;
unsigned long tmp_ofs, page_ofs;
tmp_ofs = dev_priv->ring_rptr->offset - dev->sg->handle;
tmp_ofs = dev_priv->ring_rptr->offset -
(unsigned long)dev->sg->virtual;
page_ofs = tmp_ofs >> PAGE_SHIFT;
RADEON_WRITE( RADEON_CP_RB_RPTR_ADDR,
@ -1491,8 +1492,8 @@ static int radeon_do_init_cp( drm_device_t *dev, drm_radeon_init_t *init )
else
#endif
dev_priv->gart_buffers_offset = (dev->agp_buffer_map->offset
- dev->sg->handle
+ dev_priv->gart_vm_start);
- (unsigned long)dev->sg->virtual
+ dev_priv->gart_vm_start);
DRM_DEBUG( "dev_priv->gart_size %d\n",
dev_priv->gart_size );

21
drivers/infiniband/hw/mthca/mthca_eq.c
View File

@ -396,20 +396,21 @@ static irqreturn_t mthca_tavor_interrupt(int irq, void *dev_ptr, struct pt_regs
writel(dev->eq_table.clr_mask, dev->eq_table.clr_int);
ecr = readl(dev->eq_regs.tavor.ecr_base + 4);
if (ecr) {
writel(ecr, dev->eq_regs.tavor.ecr_base +
MTHCA_ECR_CLR_BASE - MTHCA_ECR_BASE + 4);
if (!ecr)
return IRQ_NONE;
for (i = 0; i < MTHCA_NUM_EQ; ++i)
if (ecr & dev->eq_table.eq[i].eqn_mask &&
mthca_eq_int(dev, &dev->eq_table.eq[i])) {
writel(ecr, dev->eq_regs.tavor.ecr_base +
MTHCA_ECR_CLR_BASE - MTHCA_ECR_BASE + 4);
for (i = 0; i < MTHCA_NUM_EQ; ++i)
if (ecr & dev->eq_table.eq[i].eqn_mask) {
if (mthca_eq_int(dev, &dev->eq_table.eq[i]))
tavor_set_eq_ci(dev, &dev->eq_table.eq[i],
dev->eq_table.eq[i].cons_index);
tavor_eq_req_not(dev, dev->eq_table.eq[i].eqn);
}
}
tavor_eq_req_not(dev, dev->eq_table.eq[i].eqn);
}
return IRQ_RETVAL(ecr);
return IRQ_HANDLED;
}
static irqreturn_t mthca_tavor_msi_x_interrupt(int irq, void *eq_ptr,

10
drivers/md/md.c
View File

@ -3568,7 +3568,8 @@ static void md_do_sync(mddev_t *mddev)
mddev->curr_resync = 2;
try_again:
if (signal_pending(current)) {
if (signal_pending(current) ||
kthread_should_stop()) {
flush_signals(current);
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
goto skip;
@ -3590,8 +3591,9 @@ static void md_do_sync(mddev_t *mddev)
*/
continue;
prepare_to_wait(&resync_wait, &wq, TASK_INTERRUPTIBLE);
if (!signal_pending(current)
&& mddev2->curr_resync >= mddev->curr_resync) {
if (!signal_pending(current) &&
!kthread_should_stop() &&
mddev2->curr_resync >= mddev->curr_resync) {
printk(KERN_INFO "md: delaying resync of %s"
" until %s has finished resync (they"
" share one or more physical units)\n",
@ -3697,7 +3699,7 @@ static void md_do_sync(mddev_t *mddev)
}
if (signal_pending(current)) {
if (signal_pending(current) || kthread_should_stop()) {
/*
* got a signal, exit.
*/

1
drivers/media/video/Kconfig
View File

@ -262,7 +262,6 @@ config VIDEO_SAA7134_DVB
depends on VIDEO_SAA7134 && DVB_CORE
select VIDEO_BUF_DVB
select DVB_MT352
select DVB_CX22702
select DVB_TDA1004X
---help---
This adds support for DVB cards based on the

12
drivers/message/fusion/mptsas.c
View File

@ -257,8 +257,8 @@ static void mptsas_print_device_pg0(SasDevicePage0_t *pg0)
printk("SAS Address=0x%llX\n", le64_to_cpu(sas_address));
printk("Target ID=0x%X\n", pg0->TargetID);
printk("Bus=0x%X\n", pg0->Bus);
printk("PhyNum=0x%X\n", pg0->PhyNum);
printk("AccessStatus=0x%X\n", le16_to_cpu(pg0->AccessStatus));
printk("Parent Phy Num=0x%X\n", pg0->PhyNum);
printk("Access Status=0x%X\n", le16_to_cpu(pg0->AccessStatus));
printk("Device Info=0x%X\n", le32_to_cpu(pg0->DeviceInfo));
printk("Flags=0x%X\n", le16_to_cpu(pg0->Flags));
printk("Physical Port=0x%X\n", pg0->PhysicalPort);
@ -270,7 +270,7 @@ static void mptsas_print_expander_pg1(SasExpanderPage1_t *pg1)
printk("---- SAS EXPANDER PAGE 1 ------------\n");
printk("Physical Port=0x%X\n", pg1->PhysicalPort);
printk("PHY Identifier=0x%X\n", pg1->Phy);
printk("PHY Identifier=0x%X\n", pg1->PhyIdentifier);
printk("Negotiated Link Rate=0x%X\n", pg1->NegotiatedLinkRate);
printk("Programmed Link Rate=0x%X\n", pg1->ProgrammedLinkRate);
printk("Hardware Link Rate=0x%X\n", pg1->HwLinkRate);
@ -604,7 +604,7 @@ mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
mptsas_print_expander_pg1(buffer);
/* save config data */
phy_info->phy_id = buffer->Phy;
phy_info->phy_id = buffer->PhyIdentifier;
phy_info->port_id = buffer->PhysicalPort;
phy_info->negotiated_link_rate = buffer->NegotiatedLinkRate;
phy_info->programmed_link_rate = buffer->ProgrammedLinkRate;
@ -825,6 +825,8 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc, int *index)
mptsas_sas_device_pg0(ioc, &port_info->phy_info[i].identify,
(MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE <<
MPI_SAS_DEVICE_PGAD_FORM_SHIFT), handle);
port_info->phy_info[i].identify.phy_id =
port_info->phy_info[i].phy_id;
handle = port_info->phy_info[i].identify.handle;
if (port_info->phy_info[i].attached.handle) {
@ -881,6 +883,8 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index)
(MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
port_info->phy_info[i].identify.handle);
port_info->phy_info[i].identify.phy_id =
port_info->phy_info[i].phy_id;
}
if (port_info->phy_info[i].attached.handle) {

101
drivers/pci/quirks.c
View File

@ -241,7 +241,8 @@ static void __devinit quirk_s3_64M(struct pci_dev *dev)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M );
static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region, unsigned size, int nr)
static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region,
unsigned size, int nr, const char *name)
{
region &= ~(size-1);
if (region) {
@ -259,6 +260,7 @@ static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region, unsi
pcibios_bus_to_resource(dev, res, &bus_region);
pci_claim_resource(dev, nr);
printk("PCI quirk: region %04x-%04x claimed by %s\n", region, region + size - 1, name);
}
}
@ -291,25 +293,98 @@ static void __devinit quirk_ali7101_acpi(struct pci_dev *dev)
u16 region;
pci_read_config_word(dev, 0xE0, &region);
quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES);
quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI");
pci_read_config_word(dev, 0xE2, &region);
quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1);
quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB");
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi );
static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable)
{
u32 devres;
u32 mask, size, base;
pci_read_config_dword(dev, port, &devres);
if ((devres & enable) != enable)
return;
mask = (devres >> 16) & 15;
base = devres & 0xffff;
size = 16;
for (;;) {
unsigned bit = size >> 1;
if ((bit & mask) == bit)
break;
size = bit;
}
/*
* For now we only print it out. Eventually we'll want to
* reserve it (at least if it's in the 0x1000+ range), but
* let's get enough confirmation reports first.
*/
base &= -size;
printk("%s PIO at %04x-%04x\n", name, base, base + size - 1);
}
static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable)
{
u32 devres;
u32 mask, size, base;
pci_read_config_dword(dev, port, &devres);
if ((devres & enable) != enable)
return;
base = devres & 0xffff0000;
mask = (devres & 0x3f) << 16;
size = 128 << 16;
for (;;) {
unsigned bit = size >> 1;
if ((bit & mask) == bit)
break;
size = bit;
}
/*
* For now we only print it out. Eventually we'll want to
* reserve it, but let's get enough confirmation reports first.
*/
base &= -size;
printk("%s MMIO at %04x-%04x\n", name, base, base + size - 1);
}
/*
* PIIX4 ACPI: Two IO regions pointed to by longwords at
* 0x40 (64 bytes of ACPI registers)
* 0x90 (32 bytes of SMB registers)
* and a few strange programmable PIIX4 device resources.
*/
static void __devinit quirk_piix4_acpi(struct pci_dev *dev)
{
u32 region;
u32 region, res_a;
pci_read_config_dword(dev, 0x40, &region);
quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES);
quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI");
pci_read_config_dword(dev, 0x90, &region);
quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1);
quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB");
/* Device resource A has enables for some of the other ones */
pci_read_config_dword(dev, 0x5c, &res_a);
piix4_io_quirk(dev, "PIIX4 devres B", 0x60, 3 << 21);
piix4_io_quirk(dev, "PIIX4 devres C", 0x64, 3 << 21);
/* Device resource D is just bitfields for static resources */
/* Device 12 enabled? */
if (res_a & (1 << 29)) {
piix4_io_quirk(dev, "PIIX4 devres E", 0x68, 1 << 20);
piix4_mem_quirk(dev, "PIIX4 devres F", 0x6c, 1 << 7);
}
/* Device 13 enabled? */
if (res_a & (1 << 30)) {
piix4_io_quirk(dev, "PIIX4 devres G", 0x70, 1 << 20);
piix4_mem_quirk(dev, "PIIX4 devres H", 0x74, 1 << 7);
}
piix4_io_quirk(dev, "PIIX4 devres I", 0x78, 1 << 20);
piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi );
@ -323,10 +398,10 @@ static void __devinit quirk_ich4_lpc_acpi(struct pci_dev *dev)
u32 region;
pci_read_config_dword(dev, 0x40, &region);
quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES);
quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH4 ACPI/GPIO/TCO");
pci_read_config_dword(dev, 0x58, &region);
quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1);
quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH4 GPIO");
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi );
@ -352,7 +427,7 @@ static void __devinit quirk_vt82c586_acpi(struct pci_dev *dev)
if (rev & 0x10) {
pci_read_config_dword(dev, 0x48, &region);
region &= PCI_BASE_ADDRESS_IO_MASK;
quirk_io_region(dev, region, 256, PCI_BRIDGE_RESOURCES);
quirk_io_region(dev, region, 256, PCI_BRIDGE_RESOURCES, "vt82c586 ACPI");
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi );
@ -372,11 +447,11 @@ static void __devinit quirk_vt82c686_acpi(struct pci_dev *dev)
pci_read_config_word(dev, 0x70, &hm);
hm &= PCI_BASE_ADDRESS_IO_MASK;
quirk_io_region(dev, hm, 128, PCI_BRIDGE_RESOURCES + 1);
quirk_io_region(dev, hm, 128, PCI_BRIDGE_RESOURCES + 1, "vt82c868 HW-mon");
pci_read_config_dword(dev, 0x90, &smb);
smb &= PCI_BASE_ADDRESS_IO_MASK;
quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 2);
quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 2, "vt82c868 SMB");
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi );
@ -391,11 +466,11 @@ static void __devinit quirk_vt8235_acpi(struct pci_dev *dev)
pci_read_config_word(dev, 0x88, &pm);
pm &= PCI_BASE_ADDRESS_IO_MASK;
quirk_io_region(dev, pm, 128, PCI_BRIDGE_RESOURCES);
quirk_io_region(dev, pm, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM");
pci_read_config_word(dev, 0xd0, &smb);
smb &= PCI_BASE_ADDRESS_IO_MASK;
quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 1);
quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 1, "vt8235 SMB");
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi);

2
drivers/pci/setup-bus.c
View File

@ -40,7 +40,7 @@
* FIXME: IO should be max 256 bytes. However, since we may
* have a P2P bridge below a cardbus bridge, we need 4K.
*/
#define CARDBUS_IO_SIZE (4*1024)
#define CARDBUS_IO_SIZE (256)
#define CARDBUS_MEM_SIZE (32*1024*1024)
static void __devinit

2
drivers/scsi/NCR5380.c
View File

@ -91,7 +91,7 @@
#ifndef NDEBUG
#define NDEBUG 0
#endif
#ifndef NDEBUG
#ifndef NDEBUG_ABORT
#define NDEBUG_ABORT 0
#endif

2
drivers/scsi/aacraid/aacraid.h
View File

@ -19,7 +19,7 @@
#define AAC_MAX_LUN (8)
#define AAC_MAX_HOSTPHYSMEMPAGES (0xfffff)
#define AAC_MAX_32BIT_SGBCOUNT ((unsigned short)512)
#define AAC_MAX_32BIT_SGBCOUNT ((unsigned short)256)
/*
* These macros convert from physical channels to virtual channels

3
drivers/scsi/qla2xxx/qla_os.c
View File

@ -1325,6 +1325,8 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info)
ha->brd_info = brd_info;
sprintf(ha->host_str, "%s_%ld", ha->brd_info->drv_name, ha->host_no);
ha->dpc_pid = -1;
/* Configure PCI I/O space */
ret = qla2x00_iospace_config(ha);
if (ret)
@ -1448,7 +1450,6 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info)
*/
spin_lock_init(&ha->mbx_reg_lock);
ha->dpc_pid = -1;
init_completion(&ha->dpc_inited);
init_completion(&ha->dpc_exited);

1
drivers/scsi/scsi_devinfo.c
View File

@ -185,6 +185,7 @@ static struct {
{"PIONEER", "CD-ROM DRM-600", NULL, BLIST_FORCELUN | BLIST_SINGLELUN},
{"PIONEER", "CD-ROM DRM-602X", NULL, BLIST_FORCELUN | BLIST_SINGLELUN},
{"PIONEER", "CD-ROM DRM-604X", NULL, BLIST_FORCELUN | BLIST_SINGLELUN},
{"PIONEER", "CD-ROM DRM-624X", NULL, BLIST_FORCELUN | BLIST_SINGLELUN},
{"REGAL", "CDC-4X", NULL, BLIST_MAX5LUN | BLIST_SINGLELUN},
{"SanDisk", "ImageMate CF-SD1", NULL, BLIST_FORCELUN},
{"SEAGATE", "ST34555N", "0930", BLIST_NOTQ}, /* Chokes on tagged INQUIRY */

7
drivers/scsi/scsi_lib.c
View File

@ -97,7 +97,6 @@ int scsi_insert_special_req(struct scsi_request *sreq, int at_head)
}
static void scsi_run_queue(struct request_queue *q);
static void scsi_release_buffers(struct scsi_cmnd *cmd);
/*
* Function: scsi_unprep_request()
@ -1040,8 +1039,10 @@ static int scsi_init_io(struct scsi_cmnd *cmd)
* if sg table allocation fails, requeue request later.
*/
sgpnt = scsi_alloc_sgtable(cmd, GFP_ATOMIC);
if (unlikely(!sgpnt))
if (unlikely(!sgpnt)) {
scsi_unprep_request(req);
return BLKPREP_DEFER;
}
cmd->request_buffer = (char *) sgpnt;
cmd->request_bufflen = req->nr_sectors << 9;
@ -1245,8 +1246,8 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req)
*/
ret = scsi_init_io(cmd);
switch(ret) {
/* For BLKPREP_KILL/DEFER the cmd was released */
case BLKPREP_KILL:
/* BLKPREP_KILL return also releases the command */
goto kill;
case BLKPREP_DEFER:
goto defer;

13
drivers/scsi/scsi_transport_fc.c
View File

@ -819,12 +819,15 @@ show_fc_private_host_tgtid_bind_type(struct class_device *cdev, char *buf)
return snprintf(buf, FC_BINDTYPE_MAX_NAMELEN, "%s\n", name);
}
#define get_list_head_entry(pos, head, member) \
pos = list_entry((head)->next, typeof(*pos), member)
static ssize_t
store_fc_private_host_tgtid_bind_type(struct class_device *cdev,
const char *buf, size_t count)
{
struct Scsi_Host *shost = transport_class_to_shost(cdev);
struct fc_rport *rport, *next_rport;
struct fc_rport *rport;
enum fc_tgtid_binding_type val;
unsigned long flags;
@ -834,9 +837,13 @@ store_fc_private_host_tgtid_bind_type(struct class_device *cdev,
/* if changing bind type, purge all unused consistent bindings */
if (val != fc_host_tgtid_bind_type(shost)) {
spin_lock_irqsave(shost->host_lock, flags);
list_for_each_entry_safe(rport, next_rport,
&fc_host_rport_bindings(shost), peers)
while (!list_empty(&fc_host_rport_bindings(shost))) {
get_list_head_entry(rport,
&fc_host_rport_bindings(shost), peers);
spin_unlock_irqrestore(shost->host_lock, flags);
fc_rport_terminate(rport);
spin_lock_irqsave(shost->host_lock, flags);
}
spin_unlock_irqrestore(shost->host_lock, flags);
}

26
drivers/serial/8250_pci.c
View File

@ -152,6 +152,7 @@ static int __devinit pci_hp_diva_init(struct pci_dev *dev)
rc = 4;
break;
case PCI_DEVICE_ID_HP_DIVA_POWERBAR:
case PCI_DEVICE_ID_HP_DIVA_HURRICANE:
rc = 1;
break;
}
@ -226,8 +227,10 @@ static int __devinit pci_plx9050_init(struct pci_dev *dev)
}
irq_config = 0x41;
if (dev->vendor == PCI_VENDOR_ID_PANACOM)
if (dev->vendor == PCI_VENDOR_ID_PANACOM ||
dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) {
irq_config = 0x43;
}
if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
(dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) {
/*
@ -661,6 +664,15 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
/*
* PLX
*/
{
.vendor = PCI_VENDOR_ID_PLX,
.device = PCI_DEVICE_ID_PLX_9050,
.subvendor = PCI_SUBVENDOR_ID_EXSYS,
.subdevice = PCI_SUBDEVICE_ID_EXSYS_4055,
.init = pci_plx9050_init,
.setup = pci_default_setup,
.exit = __devexit_p(pci_plx9050_exit),
},
{
.vendor = PCI_VENDOR_ID_PLX,
.device = PCI_DEVICE_ID_PLX_9050,
@ -927,6 +939,7 @@ enum pci_board_num_t {
pbn_panacom,
pbn_panacom2,
pbn_panacom4,
pbn_exsys_4055,
pbn_plx_romulus,
pbn_oxsemi,
pbn_intel_i960,
@ -1292,6 +1305,13 @@ static struct pciserial_board pci_boards[] __devinitdata = {
.reg_shift = 7,
},
[pbn_exsys_4055] = {
.flags = FL_BASE2,
.num_ports = 4,
.base_baud = 115200,
.uart_offset = 8,
},
/* I think this entry is broken - the first_offset looks wrong --rmk */
[pbn_plx_romulus] = {
.flags = FL_BASE2,
@ -1853,6 +1873,10 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_SUBVENDOR_ID_CHASE_PCIRAS,
PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0,
pbn_b2_8_460800 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_EXSYS,
PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0,
pbn_exsys_4055 },
/*
* Megawolf Romulus PCI Serial Card, from Mike Hudson
* (Exoray@isys.ca)

8
drivers/video/fbsysfs.c
View File

@ -242,6 +242,13 @@ static ssize_t show_virtual(struct class_device *class_device, char *buf)
fb_info->var.yres_virtual);
}
static ssize_t show_stride(struct class_device *class_device, char *buf)
{
struct fb_info *fb_info =
(struct fb_info *)class_get_devdata(class_device);
return snprintf(buf, PAGE_SIZE, "%d\n", fb_info->fix.line_length);
}
/* Format for cmap is "%02x%c%4x%4x%4x\n" */
/* %02x entry %c transp %4x red %4x blue %4x green \n */
/* 256 rows at 16 chars equals 4096, the normal page size */
@ -432,6 +439,7 @@ static struct class_device_attribute class_device_attrs[] = {
__ATTR(pan, S_IRUGO|S_IWUSR, show_pan, store_pan),
__ATTR(virtual_size, S_IRUGO|S_IWUSR, show_virtual, store_virtual),
__ATTR(name, S_IRUGO, show_name, NULL),
__ATTR(stride, S_IRUGO, show_stride, NULL),
};
int fb_init_class_device(struct fb_info *fb_info)

6
fs/aio.c
View File

@ -1397,6 +1397,9 @@ static ssize_t aio_setup_iocb(struct kiocb *kiocb)
if (unlikely(!access_ok(VERIFY_WRITE, kiocb->ki_buf,
kiocb->ki_left)))
break;
ret = security_file_permission(file, MAY_READ);
if (unlikely(ret))
break;
ret = -EINVAL;
if (file->f_op->aio_read)
kiocb->ki_retry = aio_pread;
@ -1409,6 +1412,9 @@ static ssize_t aio_setup_iocb(struct kiocb *kiocb)
if (unlikely(!access_ok(VERIFY_READ, kiocb->ki_buf,
kiocb->ki_left)))
break;
ret = security_file_permission(file, MAY_WRITE);
if (unlikely(ret))
break;
ret = -EINVAL;
if (file->f_op->aio_write)
kiocb->ki_retry = aio_pwrite;

1
fs/hfsplus/super.c
View File

@ -50,6 +50,7 @@ static void hfsplus_read_inode(struct inode *inode)
init_MUTEX(&HFSPLUS_I(inode).extents_lock);
HFSPLUS_I(inode).flags = 0;
HFSPLUS_I(inode).rsrc_inode = NULL;
atomic_set(&HFSPLUS_I(inode).opencnt, 0);
if (inode->i_ino >= HFSPLUS_FIRSTUSER_CNID) {
read_inode:

1
fs/inotify.c
View File

@ -176,6 +176,7 @@ static inline void put_inotify_dev(struct inotify_device *dev)
if (atomic_dec_and_test(&dev->count)) {
atomic_dec(&dev->user->inotify_devs);
free_uid(dev->user);
idr_destroy(&dev->idr);
kfree(dev);
}
}

14
include/asm-alpha/atomic.h
View File

@ -1,6 +1,8 @@
#ifndef _ALPHA_ATOMIC_H
#define _ALPHA_ATOMIC_H
#include <asm/barrier.h>
/*
* Atomic operations that C can't guarantee us. Useful for
* resource counting etc...
@ -100,18 +102,19 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v)
static __inline__ long atomic_add_return(int i, atomic_t * v)
{
long temp, result;
smp_mb();
__asm__ __volatile__(
"1: ldl_l %0,%1\n"
" addl %0,%3,%2\n"
" addl %0,%3,%0\n"
" stl_c %0,%1\n"
" beq %0,2f\n"
" mb\n"
".subsection 2\n"
"2: br 1b\n"
".previous"
:"=&r" (temp), "=m" (v->counter), "=&r" (result)
:"Ir" (i), "m" (v->counter) : "memory");
smp_mb();
return result;
}
@ -120,54 +123,57 @@ static __inline__ long atomic_add_return(int i, atomic_t * v)
static __inline__ long atomic64_add_return(long i, atomic64_t * v)
{
long temp, result;
smp_mb();
__asm__ __volatile__(
"1: ldq_l %0,%1\n"
" addq %0,%3,%2\n"
" addq %0,%3,%0\n"
" stq_c %0,%1\n"
" beq %0,2f\n"
" mb\n"
".subsection 2\n"
"2: br 1b\n"
".previous"
:"=&r" (temp), "=m" (v->counter), "=&r" (result)
:"Ir" (i), "m" (v->counter) : "memory");
smp_mb();
return result;
}
static __inline__ long atomic_sub_return(int i, atomic_t * v)
{
long temp, result;
smp_mb();
__asm__ __volatile__(
"1: ldl_l %0,%1\n"
" subl %0,%3,%2\n"
" subl %0,%3,%0\n"
" stl_c %0,%1\n"
" beq %0,2f\n"
" mb\n"
".subsection 2\n"
"2: br 1b\n"
".previous"
:"=&r" (temp), "=m" (v->counter), "=&r" (result)
:"Ir" (i), "m" (v->counter) : "memory");
smp_mb();
return result;
}
static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
{
long temp, result;
smp_mb();
__asm__ __volatile__(
"1: ldq_l %0,%1\n"
" subq %0,%3,%2\n"
" subq %0,%3,%0\n"
" stq_c %0,%1\n"
" beq %0,2f\n"
" mb\n"
".subsection 2\n"
"2: br 1b\n"
".previous"
:"=&r" (temp), "=m" (v->counter), "=&r" (result)
:"Ir" (i), "m" (v->counter) : "memory");
smp_mb();
return result;
}

34
include/asm-alpha/barrier.h Normal file
View File

@ -0,0 +1,34 @@
#ifndef __BARRIER_H
#define __BARRIER_H
#define mb() \
__asm__ __volatile__("mb": : :"memory")
#define rmb() \
__asm__ __volatile__("mb": : :"memory")
#define wmb() \
__asm__ __volatile__("wmb": : :"memory")
#define read_barrier_depends() \
__asm__ __volatile__("mb": : :"memory")
#ifdef CONFIG_SMP
#define smp_mb() mb()
#define smp_rmb() rmb()
#define smp_wmb() wmb()
#define smp_read_barrier_depends() read_barrier_depends()
#else
#define smp_mb() barrier()
#define smp_rmb() barrier()
#define smp_wmb() barrier()
#define smp_read_barrier_depends() barrier()
#endif
#define set_mb(var, value) \
do { var = value; mb(); } while (0)
#define set_wmb(var, value) \
do { var = value; wmb(); } while (0)
#endif /* __BARRIER_H */

31
include/asm-alpha/system.h
View File

@ -4,6 +4,7 @@
#include <linux/config.h>
#include <asm/pal.h>
#include <asm/page.h>
#include <asm/barrier.h>
/*
* System defines.. Note that this is included both from .c and .S
@ -139,36 +140,6 @@ extern void halt(void) __attribute__((noreturn));
struct task_struct;
extern struct task_struct *alpha_switch_to(unsigned long, struct task_struct*);
#define mb() \
__asm__ __volatile__("mb": : :"memory")
#define rmb() \
__asm__ __volatile__("mb": : :"memory")
#define wmb() \
__asm__ __volatile__("wmb": : :"memory")
#define read_barrier_depends() \
__asm__ __volatile__("mb": : :"memory")
#ifdef CONFIG_SMP
#define smp_mb() mb()
#define smp_rmb() rmb()
#define smp_wmb() wmb()
#define smp_read_barrier_depends() read_barrier_depends()
#else
#define smp_mb() barrier()
#define smp_rmb() barrier()
#define smp_wmb() barrier()
#define smp_read_barrier_depends() barrier()
#endif
#define set_mb(var, value) \
do { var = value; mb(); } while (0)
#define set_wmb(var, value) \
do { var = value; wmb(); } while (0)
#define imb() \
__asm__ __volatile__ ("call_pal %0 #imb" : : "i" (PAL_imb) : "memory")

21
include/asm-arm/arch-s3c2410/regs-clock.h
View File

@ -18,7 +18,9 @@
* 10-Feb-2005 Ben Dooks Fixed CAMDIVN address (Guillaume Gourat)
* 10-Mar-2005 Lucas Villa Real Changed S3C2410_VA to S3C24XX_VA
* 27-Aug-2005 Ben Dooks Add clock-slow info
*/
* 20-Oct-2005 Ben Dooks Fixed overflow in PLL (Guillaume Gourat)
* 20-Oct-2005 Ben Dooks Add masks for DCLK (Guillaume Gourat)
*/
#ifndef __ASM_ARM_REGS_CLOCK
#define __ASM_ARM_REGS_CLOCK "$Id: clock.h,v 1.4 2003/04/30 14:50:51 ben Exp $"
@ -66,11 +68,16 @@
#define S3C2410_DCLKCON_DCLK0_UCLK (1<<1)
#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4)
#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8)
#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4)
#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8)
#define S3C2410_DCLKCON_DCLK1EN (1<<16)
#define S3C2410_DCLKCON_DCLK1_PCLK (0<<17)
#define S3C2410_DCLKCON_DCLK1_UCLK (1<<17)
#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20)
#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24)
#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20)
#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24)
#define S3C2410_CLKDIVN_PDIVN (1<<0)
#define S3C2410_CLKDIVN_HDIVN (1<<1)
@ -83,10 +90,13 @@
#ifndef __ASSEMBLY__
#include <asm/div64.h>
static inline unsigned int
s3c2410_get_pll(int pllval, int baseclk)
s3c2410_get_pll(unsigned int pllval, unsigned int baseclk)
{
int mdiv, pdiv, sdiv;
unsigned int mdiv, pdiv, sdiv;
uint64_t fvco;
mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT;
pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT;
@ -96,7 +106,10 @@ s3c2410_get_pll(int pllval, int baseclk)
pdiv &= S3C2410_PLLCON_PDIVMASK;
sdiv &= S3C2410_PLLCON_SDIVMASK;
return (baseclk * (mdiv + 8)) / ((pdiv + 2) << sdiv);
fvco = (uint64_t)baseclk * (mdiv + 8);
do_div(fvco, (pdiv + 2) << sdiv);
return (unsigned int)fvco;
}
#endif /* __ASSEMBLY__ */

1
include/asm-arm/bitops.h
View File

@ -347,7 +347,6 @@ static inline unsigned long __ffs(unsigned long word)
* the clz instruction for much better code efficiency.
*/
static __inline__ int generic_fls(int x);
#define fls(x) \
( __builtin_constant_p(x) ? generic_fls(x) : \
({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) )

1
include/linux/idr.h
View File

@ -75,4 +75,5 @@ int idr_pre_get(struct idr *idp, unsigned gfp_mask);
int idr_get_new(struct idr *idp, void *ptr, int *id);
int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id);
void idr_remove(struct idr *idp, int id);
void idr_destroy(struct idr *idp);
void idr_init(struct idr *idp);

2
include/linux/pci_ids.h
View File

@ -723,6 +723,7 @@
#define PCI_DEVICE_ID_HP_DIVA_EVEREST 0x1282
#define PCI_DEVICE_ID_HP_DIVA_AUX 0x1290
#define PCI_DEVICE_ID_HP_DIVA_RMP3 0x1301
#define PCI_DEVICE_ID_HP_DIVA_HURRICANE 0x132a
#define PCI_DEVICE_ID_HP_CISS 0x3210
#define PCI_DEVICE_ID_HP_CISSA 0x3220
#define PCI_DEVICE_ID_HP_CISSB 0x3222
@ -2696,6 +2697,7 @@
#define PCI_SUBVENDOR_ID_EXSYS 0xd84d
#define PCI_SUBDEVICE_ID_EXSYS_4014 0x4014
#define PCI_SUBDEVICE_ID_EXSYS_4055 0x4055
#define PCI_VENDOR_ID_TIGERJET 0xe159
#define PCI_DEVICE_ID_TIGERJET_300 0x0001

2
include/net/ax25.h
View File

@ -171,7 +171,7 @@ typedef struct {
ax25_address calls[AX25_MAX_DIGIS];
unsigned char repeated[AX25_MAX_DIGIS];
unsigned char ndigi;
char lastrepeat;
signed char lastrepeat;
} ax25_digi;
typedef struct ax25_route {

4
include/net/llc_pdu.h
View File

@ -254,8 +254,10 @@ static inline void llc_pdu_decode_sa(struct sk_buff *skb, u8 *sa)
{
if (skb->protocol == ntohs(ETH_P_802_2))
memcpy(sa, eth_hdr(skb)->h_source, ETH_ALEN);
else if (skb->protocol == ntohs(ETH_P_TR_802_2))
else if (skb->protocol == ntohs(ETH_P_TR_802_2)) {
memcpy(sa, tr_hdr(skb)->saddr, ETH_ALEN);
*sa &= 0x7F;
}
}
/**

1
kernel/exit.c
View File

@ -843,6 +843,7 @@ fastcall NORET_TYPE void do_exit(long code)
group_dead = atomic_dec_and_test(&tsk->signal->live);
if (group_dead) {
del_timer_sync(&tsk->signal->real_timer);
exit_itimers(tsk->signal);
acct_process(code);
}
exit_mm(tsk);

110
kernel/posix-cpu-timers.c
View File

@ -91,7 +91,7 @@ static inline union cpu_time_count cpu_time_sub(clockid_t which_clock,
* Update expiry time from increment, and increase overrun count,
* given the current clock sample.
*/
static inline void bump_cpu_timer(struct k_itimer *timer,
static void bump_cpu_timer(struct k_itimer *timer,
union cpu_time_count now)
{
int i;
@ -110,7 +110,7 @@ static inline void bump_cpu_timer(struct k_itimer *timer,
for (i = 0; incr < delta - incr; i++)
incr = incr << 1;
for (; i >= 0; incr >>= 1, i--) {
if (delta <= incr)
if (delta < incr)
continue;
timer->it.cpu.expires.sched += incr;
timer->it_overrun += 1 << i;
@ -128,7 +128,7 @@ static inline void bump_cpu_timer(struct k_itimer *timer,
for (i = 0; cputime_lt(incr, cputime_sub(delta, incr)); i++)
incr = cputime_add(incr, incr);
for (; i >= 0; incr = cputime_halve(incr), i--) {
if (cputime_le(delta, incr))
if (cputime_lt(delta, incr))
continue;
timer->it.cpu.expires.cpu =
cputime_add(timer->it.cpu.expires.cpu, incr);
@ -380,28 +380,31 @@ int posix_cpu_timer_create(struct k_itimer *new_timer)
int posix_cpu_timer_del(struct k_itimer *timer)
{
struct task_struct *p = timer->it.cpu.task;
int ret = 0;
if (timer->it.cpu.firing)
return TIMER_RETRY;
if (likely(p != NULL)) {
read_lock(&tasklist_lock);
if (unlikely(p->signal == NULL)) {
/*
* We raced with the reaping of the task.
* The deletion should have cleared us off the list.
*/
BUG_ON(!list_empty(&timer->it.cpu.entry));
} else {
spin_lock(&p->sighand->siglock);
if (timer->it.cpu.firing)
ret = TIMER_RETRY;
else
list_del(&timer->it.cpu.entry);
spin_unlock(&p->sighand->siglock);
}
read_unlock(&tasklist_lock);
if (unlikely(p == NULL))
return 0;
spin_lock(&p->sighand->siglock);
if (!list_empty(&timer->it.cpu.entry)) {
/*
* Take us off the task's timer list. We don't need to
* take tasklist_lock and check for the task being reaped.
* If it was reaped, it already called posix_cpu_timers_exit
* and posix_cpu_timers_exit_group to clear all the timers
* that pointed to it.
*/
list_del(&timer->it.cpu.entry);
put_task_struct(p);
if (!ret)
put_task_struct(p);
}
spin_unlock(&p->sighand->siglock);
return 0;
return ret;
}
/*
@ -418,8 +421,6 @@ static void cleanup_timers(struct list_head *head,
cputime_t ptime = cputime_add(utime, stime);
list_for_each_entry_safe(timer, next, head, entry) {
put_task_struct(timer->task);
timer->task = NULL;
list_del_init(&timer->entry);
if (cputime_lt(timer->expires.cpu, ptime)) {
timer->expires.cpu = cputime_zero;
@ -431,8 +432,6 @@ static void cleanup_timers(struct list_head *head,
++head;
list_for_each_entry_safe(timer, next, head, entry) {
put_task_struct(timer->task);
timer->task = NULL;
list_del_init(&timer->entry);
if (cputime_lt(timer->expires.cpu, utime)) {
timer->expires.cpu = cputime_zero;
@ -444,8 +443,6 @@ static void cleanup_timers(struct list_head *head,
++head;
list_for_each_entry_safe(timer, next, head, entry) {
put_task_struct(timer->task);
timer->task = NULL;
list_del_init(&timer->entry);
if (timer->expires.sched < sched_time) {
timer->expires.sched = 0;
@ -489,6 +486,9 @@ static void process_timer_rebalance(struct task_struct *p,
struct task_struct *t = p;
unsigned int nthreads = atomic_read(&p->signal->live);
if (!nthreads)
return;
switch (clock_idx) {
default:
BUG();
@ -497,7 +497,7 @@ static void process_timer_rebalance(struct task_struct *p,
left = cputime_div(cputime_sub(expires.cpu, val.cpu),
nthreads);
do {
if (!unlikely(t->exit_state)) {
if (!unlikely(t->flags & PF_EXITING)) {
ticks = cputime_add(prof_ticks(t), left);
if (cputime_eq(t->it_prof_expires,
cputime_zero) ||
@ -512,7 +512,7 @@ static void process_timer_rebalance(struct task_struct *p,
left = cputime_div(cputime_sub(expires.cpu, val.cpu),
nthreads);
do {
if (!unlikely(t->exit_state)) {
if (!unlikely(t->flags & PF_EXITING)) {
ticks = cputime_add(virt_ticks(t), left);
if (cputime_eq(t->it_virt_expires,
cputime_zero) ||
@ -527,7 +527,7 @@ static void process_timer_rebalance(struct task_struct *p,
nsleft = expires.sched - val.sched;
do_div(nsleft, nthreads);
do {
if (!unlikely(t->exit_state)) {
if (!unlikely(t->flags & PF_EXITING)) {
ns = t->sched_time + nsleft;
if (t->it_sched_expires == 0 ||
t->it_sched_expires > ns) {
@ -566,6 +566,9 @@ static void arm_timer(struct k_itimer *timer, union cpu_time_count now)
struct cpu_timer_list *next;
unsigned long i;
if (CPUCLOCK_PERTHREAD(timer->it_clock) && (p->flags & PF_EXITING))
return;
head = (CPUCLOCK_PERTHREAD(timer->it_clock) ?
p->cpu_timers : p->signal->cpu_timers);
head += CPUCLOCK_WHICH(timer->it_clock);
@ -576,17 +579,15 @@ static void arm_timer(struct k_itimer *timer, union cpu_time_count now)
listpos = head;
if (CPUCLOCK_WHICH(timer->it_clock) == CPUCLOCK_SCHED) {
list_for_each_entry(next, head, entry) {
if (next->expires.sched > nt->expires.sched) {
listpos = &next->entry;
if (next->expires.sched > nt->expires.sched)
break;
}
listpos = &next->entry;
}
} else {
list_for_each_entry(next, head, entry) {
if (cputime_gt(next->expires.cpu, nt->expires.cpu)) {
listpos = &next->entry;
if (cputime_gt(next->expires.cpu, nt->expires.cpu))
break;
}
listpos = &next->entry;
}
}
list_add(&nt->entry, listpos);
@ -730,9 +731,15 @@ int posix_cpu_timer_set(struct k_itimer *timer, int flags,
* Disarm any old timer after extracting its expiry time.
*/
BUG_ON(!irqs_disabled());
ret = 0;
spin_lock(&p->sighand->siglock);
old_expires = timer->it.cpu.expires;
list_del_init(&timer->it.cpu.entry);
if (unlikely(timer->it.cpu.firing)) {
timer->it.cpu.firing = -1;
ret = TIMER_RETRY;
} else
list_del_init(&timer->it.cpu.entry);
spin_unlock(&p->sighand->siglock);
/*
@ -780,7 +787,7 @@ int posix_cpu_timer_set(struct k_itimer *timer, int flags,
}
}
if (unlikely(timer->it.cpu.firing)) {
if (unlikely(ret)) {
/*
* We are colliding with the timer actually firing.
* Punt after filling in the timer's old value, and
@ -788,8 +795,6 @@ int posix_cpu_timer_set(struct k_itimer *timer, int flags,
* it as an overrun (thanks to bump_cpu_timer above).
*/
read_unlock(&tasklist_lock);
timer->it.cpu.firing = -1;
ret = TIMER_RETRY;
goto out;
}
@ -955,14 +960,16 @@ void posix_cpu_timer_get(struct k_itimer *timer, struct itimerspec *itp)
static void check_thread_timers(struct task_struct *tsk,
struct list_head *firing)
{
int maxfire;
struct list_head *timers = tsk->cpu_timers;
maxfire = 20;
tsk->it_prof_expires = cputime_zero;
while (!list_empty(timers)) {
struct cpu_timer_list *t = list_entry(timers->next,
struct cpu_timer_list,
entry);
if (cputime_lt(prof_ticks(tsk), t->expires.cpu)) {
if (!--maxfire || cputime_lt(prof_ticks(tsk), t->expires.cpu)) {
tsk->it_prof_expires = t->expires.cpu;
break;
}
@ -971,12 +978,13 @@ static void check_thread_timers(struct task_struct *tsk,
}
++timers;
maxfire = 20;
tsk->it_virt_expires = cputime_zero;
while (!list_empty(timers)) {
struct cpu_timer_list *t = list_entry(timers->next,
struct cpu_timer_list,
entry);
if (cputime_lt(virt_ticks(tsk), t->expires.cpu)) {
if (!--maxfire || cputime_lt(virt_ticks(tsk), t->expires.cpu)) {
tsk->it_virt_expires = t->expires.cpu;
break;
}
@ -985,12 +993,13 @@ static void check_thread_timers(struct task_struct *tsk,
}
++timers;
maxfire = 20;
tsk->it_sched_expires = 0;
while (!list_empty(timers)) {
struct cpu_timer_list *t = list_entry(timers->next,
struct cpu_timer_list,
entry);
if (tsk->sched_time < t->expires.sched) {
if (!--maxfire || tsk->sched_time < t->expires.sched) {
tsk->it_sched_expires = t->expires.sched;
break;
}
@ -1007,6 +1016,7 @@ static void check_thread_timers(struct task_struct *tsk,
static void check_process_timers(struct task_struct *tsk,
struct list_head *firing)
{
int maxfire;
struct signal_struct *const sig = tsk->signal;
cputime_t utime, stime, ptime, virt_expires, prof_expires;
unsigned long long sched_time, sched_expires;
@ -1039,12 +1049,13 @@ static void check_process_timers(struct task_struct *tsk,
} while (t != tsk);
ptime = cputime_add(utime, stime);
maxfire = 20;
prof_expires = cputime_zero;
while (!list_empty(timers)) {
struct cpu_timer_list *t = list_entry(timers->next,
struct cpu_timer_list,
entry);
if (cputime_lt(ptime, t->expires.cpu)) {
if (!--maxfire || cputime_lt(ptime, t->expires.cpu)) {
prof_expires = t->expires.cpu;
break;
}
@ -1053,12 +1064,13 @@ static void check_process_timers(struct task_struct *tsk,
}
++timers;
maxfire = 20;
virt_expires = cputime_zero;
while (!list_empty(timers)) {
struct cpu_timer_list *t = list_entry(timers->next,
struct cpu_timer_list,
entry);
if (cputime_lt(utime, t->expires.cpu)) {
if (!--maxfire || cputime_lt(utime, t->expires.cpu)) {
virt_expires = t->expires.cpu;
break;
}
@ -1067,12 +1079,13 @@ static void check_process_timers(struct task_struct *tsk,
}
++timers;
maxfire = 20;
sched_expires = 0;
while (!list_empty(timers)) {
struct cpu_timer_list *t = list_entry(timers->next,
struct cpu_timer_list,
entry);
if (sched_time < t->expires.sched) {
if (!--maxfire || sched_time < t->expires.sched) {
sched_expires = t->expires.sched;
break;
}
@ -1155,6 +1168,9 @@ static void check_process_timers(struct task_struct *tsk,
unsigned long long sched_left, sched;
const unsigned int nthreads = atomic_read(&sig->live);
if (!nthreads)
return;
prof_left = cputime_sub(prof_expires, utime);
prof_left = cputime_sub(prof_left, stime);
prof_left = cputime_div(prof_left, nthreads);
@ -1191,7 +1207,7 @@ static void check_process_timers(struct task_struct *tsk,
do {
t = next_thread(t);
} while (unlikely(t->exit_state));
} while (unlikely(t->flags & PF_EXITING));
} while (t != tsk);
}
}

2
kernel/posix-timers.c
View File

@ -1157,7 +1157,7 @@ retry_delete:
}
/*
* This is called by __exit_signal, only when there are no more
* This is called by do_exit or de_thread, only when there are no more
* references to the shared signal_struct.
*/
void exit_itimers(struct signal_struct *sig)

1
kernel/sched.c
View File

@ -3879,6 +3879,7 @@ EXPORT_SYMBOL(cpu_present_map);
#ifndef CONFIG_SMP
cpumask_t cpu_online_map = CPU_MASK_ALL;
EXPORT_SYMBOL_GPL(cpu_online_map);
cpumask_t cpu_possible_map = CPU_MASK_ALL;
#endif

14
kernel/signal.c
View File

@ -397,20 +397,8 @@ void __exit_signal(struct task_struct *tsk)
flush_sigqueue(&tsk->pending);
if (sig) {
/*
* We are cleaning up the signal_struct here. We delayed
* calling exit_itimers until after flush_sigqueue, just in
* case our thread-local pending queue contained a queued
* timer signal that would have been cleared in
* exit_itimers. When that called sigqueue_free, it would
* attempt to re-take the tasklist_lock and deadlock. This
* can never happen if we ensure that all queues the
* timer's signal might be queued on have been flushed
* first. The shared_pending queue, and our own pending
* queue are the only queues the timer could be on, since
* there are no other threads left in the group and timer
* signals are constrained to threads inside the group.
* We are cleaning up the signal_struct here.
*/
exit_itimers(sig);
exit_thread_group_keys(sig);
kmem_cache_free(signal_cachep, sig);
}

13
lib/idr.c
View File

@ -345,6 +345,19 @@ void idr_remove(struct idr *idp, int id)
}
EXPORT_SYMBOL(idr_remove);
/**
* idr_destroy - release all cached layers within an idr tree
* idp: idr handle
*/
void idr_destroy(struct idr *idp)
{
while (idp->id_free_cnt) {
struct idr_layer *p = alloc_layer(idp);
kmem_cache_free(idr_layer_cache, p);
}
}
EXPORT_SYMBOL(idr_destroy);
/**
* idr_find - return pointer for given id
* @idp: idr handle

2
mm/page_alloc.c
View File

@ -1750,6 +1750,8 @@ inline void setup_pageset(struct per_cpu_pageset *p, unsigned long batch)
{
struct per_cpu_pages *pcp;
memset(p, 0, sizeof(*p));
pcp = &p->pcp[0]; /* hot */
pcp->count = 0;
pcp->low = 2 * batch;

5
net/802/tr.c
View File

@ -340,9 +340,10 @@ static void tr_add_rif_info(struct trh_hdr *trh, struct net_device *dev)
unsigned int hash, rii_p = 0;
unsigned long flags;
struct rif_cache *entry;
unsigned char saddr0;
spin_lock_irqsave(&rif_lock, flags);
saddr0 = trh->saddr[0];
/*
* Firstly see if the entry exists
@ -395,7 +396,6 @@ printk("adding rif_entry: addr:%02X:%02X:%02X:%02X:%02X:%02X rcf:%04X\n",
entry->rcf = trh->rcf & htons((unsigned short)~TR_RCF_BROADCAST_MASK);
memcpy(&(entry->rseg[0]),&(trh->rseg[0]),8*sizeof(unsigned short));
entry->local_ring = 0;
trh->saddr[0]|=TR_RII; /* put the routing indicator back for tcpdump */
}
else
{
@ -422,6 +422,7 @@ printk("updating rif_entry: addr:%02X:%02X:%02X:%02X:%02X:%02X rcf:%04X\n",
}
entry->last_used=jiffies;
}
trh->saddr[0]=saddr0; /* put the routing indicator back for tcpdump */
spin_unlock_irqrestore(&rif_lock, flags);
}

48
net/core/neighbour.c
View File

@ -175,39 +175,10 @@ static void pneigh_queue_purge(struct sk_buff_head *list)
}
}
void neigh_changeaddr(struct neigh_table *tbl, struct net_device *dev)
static void neigh_flush_dev(struct neigh_table *tbl, struct net_device *dev)
{
int i;
write_lock_bh(&tbl->lock);
for (i=0; i <= tbl->hash_mask; i++) {
struct neighbour *n, **np;
np = &tbl->hash_buckets[i];
while ((n = *np) != NULL) {
if (dev && n->dev != dev) {
np = &n->next;
continue;
}
*np = n->next;
write_lock_bh(&n->lock);
n->dead = 1;
neigh_del_timer(n);
write_unlock_bh(&n->lock);
neigh_release(n);
}
}
write_unlock_bh(&tbl->lock);
}
int neigh_ifdown(struct neigh_table *tbl, struct net_device *dev)
{
int i;
write_lock_bh(&tbl->lock);
for (i = 0; i <= tbl->hash_mask; i++) {
struct neighbour *n, **np = &tbl->hash_buckets[i];
@ -243,7 +214,19 @@ int neigh_ifdown(struct neigh_table *tbl, struct net_device *dev)
neigh_release(n);
}
}
}
void neigh_changeaddr(struct neigh_table *tbl, struct net_device *dev)
{
write_lock_bh(&tbl->lock);
neigh_flush_dev(tbl, dev);
write_unlock_bh(&tbl->lock);
}
int neigh_ifdown(struct neigh_table *tbl, struct net_device *dev)
{
write_lock_bh(&tbl->lock);
neigh_flush_dev(tbl, dev);
pneigh_ifdown(tbl, dev);
write_unlock_bh(&tbl->lock);
@ -732,6 +715,7 @@ static inline void neigh_add_timer(struct neighbour *n, unsigned long when)
if (unlikely(mod_timer(&n->timer, when))) {
printk("NEIGH: BUG, double timer add, state is %x\n",
n->nud_state);
dump_stack();
}
}
@ -815,10 +799,10 @@ static void neigh_timer_handler(unsigned long arg)
}
if (neigh->nud_state & NUD_IN_TIMER) {
neigh_hold(neigh);
if (time_before(next, jiffies + HZ/2))
next = jiffies + HZ/2;
neigh_add_timer(neigh, next);
if (!mod_timer(&neigh->timer, next))
neigh_hold(neigh);
}
if (neigh->nud_state & (NUD_INCOMPLETE | NUD_PROBE)) {
struct sk_buff *skb = skb_peek(&neigh->arp_queue);

6
net/core/skbuff.c
View File

@ -410,6 +410,9 @@ struct sk_buff *skb_clone(struct sk_buff *skb, gfp_t gfp_mask)
C(nfct);
nf_conntrack_get(skb->nfct);
C(nfctinfo);
#if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
C(ipvs_property);
#endif
#ifdef CONFIG_BRIDGE_NETFILTER
C(nf_bridge);
nf_bridge_get(skb->nf_bridge);
@ -467,6 +470,9 @@ static void copy_skb_header(struct sk_buff *new, const struct sk_buff *old)
new->nfct = old->nfct;
nf_conntrack_get(old->nfct);
new->nfctinfo = old->nfctinfo;
#if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
new->ipvs_property = old->ipvs_property;
#endif
#ifdef CONFIG_BRIDGE_NETFILTER
new->nf_bridge = old->nf_bridge;
nf_bridge_get(old->nf_bridge);

9
net/core/wireless.c
View File

@ -455,10 +455,15 @@ static inline struct iw_statistics *get_wireless_stats(struct net_device *dev)
/* Old location, field to be removed in next WE */
if(dev->get_wireless_stats) {
printk(KERN_DEBUG "%s (WE) : Driver using old /proc/net/wireless support, please fix driver !\n",
dev->name);
static int printed_message;
if (!printed_message++)
printk(KERN_DEBUG "%s (WE) : Driver using old /proc/net/wireless support, please fix driver !\n",
dev->name);
return dev->get_wireless_stats(dev);
}
/* Not found */
return (struct iw_statistics *) NULL;
}

2
net/dccp/ipv4.c
View File

@ -463,6 +463,7 @@ static int dccp_v4_send_response(struct sock *sk, struct request_sock *req,
if (skb != NULL) {
const struct inet_request_sock *ireq = inet_rsk(req);
memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
err = ip_build_and_send_pkt(skb, sk, ireq->loc_addr,
ireq->rmt_addr,
ireq->opt);
@ -647,6 +648,7 @@ int dccp_v4_send_reset(struct sock *sk, enum dccp_reset_codes code)
if (skb != NULL) {
const struct inet_sock *inet = inet_sk(sk);
memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
err = ip_build_and_send_pkt(skb, sk,
inet->saddr, inet->daddr, NULL);
if (err == NET_XMIT_CN)

10
net/dccp/output.c
View File

@ -62,10 +62,8 @@ int dccp_transmit_skb(struct sock *sk, struct sk_buff *skb)
skb->h.raw = skb_push(skb, dccp_header_size);
dh = dccp_hdr(skb);
/*
* Data packets are not cloned as they are never retransmitted
*/
if (skb_cloned(skb))
if (!skb->sk)
skb_set_owner_w(skb, sk);
/* Build DCCP header and checksum it. */
@ -102,6 +100,7 @@ int dccp_transmit_skb(struct sock *sk, struct sk_buff *skb)
DCCP_INC_STATS(DCCP_MIB_OUTSEGS);
memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
err = ip_queue_xmit(skb, 0);
if (err <= 0)
return err;
@ -243,7 +242,8 @@ int dccp_write_xmit(struct sock *sk, struct sk_buff *skb, long *timeo)
err = dccp_transmit_skb(sk, skb);
ccid_hc_tx_packet_sent(dp->dccps_hc_tx_ccid, sk, 0, len);
}
} else
kfree_skb(skb);
return err;
}

2
net/dccp/proto.c
View File

@ -402,8 +402,6 @@ int dccp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
* This bug was _quickly_ found & fixed by just looking at an OSTRA
* generated callgraph 8) -acme
*/
if (rc != 0)
goto out_discard;
out_release:
release_sock(sk);
return rc ? : len;

3
net/ipv4/ip_output.c
View File

@ -391,6 +391,9 @@ static void ip_copy_metadata(struct sk_buff *to, struct sk_buff *from)
to->nfct = from->nfct;
nf_conntrack_get(to->nfct);
to->nfctinfo = from->nfctinfo;
#if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
to->ipvs_property = from->ipvs_property;
#endif
#ifdef CONFIG_BRIDGE_NETFILTER
nf_bridge_put(to->nf_bridge);
to->nf_bridge = from->nf_bridge;

12
net/ipv4/tcp_output.c
View File

@ -435,17 +435,7 @@ int tcp_fragment(struct sock *sk, struct sk_buff *skb, u32 len, unsigned int mss
int nsize, old_factor;
u16 flags;
if (unlikely(len >= skb->len)) {
if (net_ratelimit()) {
printk(KERN_DEBUG "TCP: seg_size=%u, mss=%u, seq=%u, "
"end_seq=%u, skb->len=%u.\n", len, mss_now,
TCP_SKB_CB(skb)->seq, TCP_SKB_CB(skb)->end_seq,
skb->len);
WARN_ON(1);
}
return 0;
}
BUG_ON(len > skb->len);
nsize = skb_headlen(skb) - len;
if (nsize < 0)
nsize = 0;

2
net/ipv6/ip6_flowlabel.c
View File

@ -483,7 +483,7 @@ int ipv6_flowlabel_opt(struct sock *sk, char __user *optval, int optlen)
goto done;
}
fl1 = sfl->fl;
atomic_inc(&fl->users);
atomic_inc(&fl1->users);
break;
}
}

2
net/sunrpc/svcsock.c
View File

@ -587,7 +587,7 @@ svc_udp_recvfrom(struct svc_rqst *rqstp)
struct timeval tv;
tv.tv_sec = xtime.tv_sec;
tv.tv_usec = xtime.tv_nsec * 1000;
tv.tv_usec = xtime.tv_nsec / NSEC_PER_USEC;
skb_set_timestamp(skb, &tv);
/* Don't enable netstamp, sunrpc doesn't
need that much accuracy */

4
security/selinux/selinuxfs.c
View File

@ -879,7 +879,7 @@ static ssize_t sel_commit_bools_write(struct file *filep,
if (sscanf(page, "%d", &new_value) != 1)
goto out;
if (new_value) {
if (new_value && bool_pending_values) {
security_set_bools(bool_num, bool_pending_values);
}
@ -952,6 +952,7 @@ static int sel_make_bools(void)
/* remove any existing files */
kfree(bool_pending_values);
bool_pending_values = NULL;
sel_remove_bools(dir);
@ -1002,6 +1003,7 @@ out:
}
return ret;
err:
kfree(values);
d_genocide(dir);
ret = -ENOMEM;
goto out;

6
security/selinux/ss/policydb.c
View File

@ -650,8 +650,10 @@ void policydb_destroy(struct policydb *p)
}
if (lrt) kfree(lrt);
for (i = 0; i < p->p_types.nprim; i++)
ebitmap_destroy(&p->type_attr_map[i]);
if (p->type_attr_map) {
for (i = 0; i < p->p_types.nprim; i++)
ebitmap_destroy(&p->type_attr_map[i]);
}
kfree(p->type_attr_map);
return;

6
sound/core/init.c
View File

@ -828,7 +828,8 @@ static int snd_generic_suspend(struct device *dev, pm_message_t state, u32 level
card = get_snd_generic_card(dev);
if (card->power_state == SNDRV_CTL_POWER_D3hot)
return 0;
card->pm_suspend(card, PMSG_SUSPEND);
if (card->pm_suspend)
card->pm_suspend(card, PMSG_SUSPEND);
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
return 0;
}
@ -843,7 +844,8 @@ static int snd_generic_resume(struct device *dev, u32 level)
card = get_snd_generic_card(dev);
if (card->power_state == SNDRV_CTL_POWER_D0)
return 0;
card->pm_resume(card);
if (card->pm_suspend)
card->pm_resume(card);
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
return 0;
}