dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

Merge branch 'next' into for-linus 

Prepare first set of updates for 3.8 merge window.
This commit is contained in:
Dmitry Torokhov 2012-12-16 22:04:14 -08:00
parent 516d798f65 a455e2985f
commit 022573c275
360 changed files with 4374 additions and 2836 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

46
Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt Normal file
View File

@ -0,0 +1,46 @@
* GPIO driven matrix keypad device tree bindings
GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
The matrix keypad supports multiple row and column lines, a key can be
placed at each intersection of a unique row and a unique column. The matrix
keypad can sense a key-press and key-release by means of GPIO lines and
report the event using GPIO interrupts to the cpu.
Required Properties:
- compatible: Should be "gpio-matrix-keypad"
- row-gpios: List of gpios used as row lines. The gpio specifier
for this property depends on the gpio controller to
which these row lines are connected.
- col-gpios: List of gpios used as column lines. The gpio specifier
for this property depends on the gpio controller to
which these column lines are connected.
- linux,keymap: The definition can be found at
bindings/input/matrix-keymap.txt
Optional Properties:
- linux,no-autorepeat: do no enable autorepeat feature.
- linux,wakeup: use any event on keypad as wakeup event.
- debounce-delay-ms: debounce interval in milliseconds
- col-scan-delay-us: delay, measured in microseconds, that is needed
before we can scan keypad after activating column gpio
Example:
matrix-keypad {
compatible = "gpio-matrix-keypad";
debounce-delay-ms = <5>;
col-scan-delay-us = <2>;
row-gpios = <&gpio2 25 0
&gpio2 26 0
&gpio2 27 0>;
col-gpios = <&gpio2 21 0
&gpio2 22 0>;
linux,keymap = <0x0000008B
0x0100009E
0x02000069
0x0001006A
0x0101001C
0x0201006C>;
};

7
Documentation/devicetree/bindings/input/pwm-beeper.txt Normal file
View File

@ -0,0 +1,7 @@
* PWM beeper device tree bindings
Registers a PWM device as beeper.
Required properties:
- compatible: should be "pwm-beeper"
- pwms: phandle to the physical PWM device

39
Documentation/devicetree/bindings/input/stmpe-keypad.txt Normal file
View File

@ -0,0 +1,39 @@
* STMPE Keypad
Required properties:
- compatible : "st,stmpe-keypad"
- linux,keymap : See ./matrix-keymap.txt
Optional properties:
- debounce-interval : Debouncing interval time in milliseconds
- st,scan-count : Scanning cycles elapsed before key data is updated
- st,no-autorepeat : If specified device will not autorepeat
Example:
stmpe_keypad {
compatible = "st,stmpe-keypad";
debounce-interval = <64>;
st,scan-count = <8>;
st,no-autorepeat;
linux,keymap = <0x205006b
0x4010074
0x3050072
0x1030004
0x502006a
0x500000a
0x5008b
0x706001c
0x405000b
0x6070003
0x3040067
0x303006c
0x60400e7
0x602009e
0x4020073
0x5050002
0x4030069
0x3020008>;
};

8
Documentation/devicetree/bindings/input/tca8418_keypad.txt Normal file
View File

@ -0,0 +1,8 @@
Required properties:
- compatible: "ti,tca8418"
- reg: the I2C address
- interrupts: IRQ line number, should trigger on falling edge
- keypad,num-rows: The number of rows
- keypad,num-columns: The number of columns
- linux,keymap: Keys definitions, see keypad-matrix.

34
Documentation/devicetree/bindings/input/touchscreen/mms114.txt Normal file
View File

@ -0,0 +1,34 @@
* MELFAS MMS114 touchscreen controller
Required properties:
- compatible: must be "melfas,mms114"
- reg: I2C address of the chip
- interrupts: interrupt to which the chip is connected
- x-size: horizontal resolution of touchscreen
- y-size: vertical resolution of touchscreen
Optional properties:
- contact-threshold:
- moving-threshold:
- x-invert: invert X axis
- y-invert: invert Y axis
Example:
i2c@00000000 {
/* ... */
touchscreen@48 {
compatible = "melfas,mms114";
reg = <0x48>;
interrupts = <39 0>;
x-size = <720>;
y-size = <1280>;
contact-threshold = <10>;
moving-threshold = <10>;
x-invert;
y-invert;
};
/* ... */
};

43
Documentation/devicetree/bindings/input/touchscreen/stmpe.txt Normal file
View File

@ -0,0 +1,43 @@
STMPE Touchscreen
----------------
Required properties:
- compatible: "st,stmpe-ts"
Optional properties:
- st,sample-time: ADC converstion time in number of clock. (0 -> 36 clocks, 1 ->
44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, 4 -> 80 clocks, 5 -> 96 clocks, 6
-> 144 clocks), recommended is 4.
- st,mod-12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
- st,ref-sel: ADC reference source (0 -> internal reference, 1 -> external
reference)
- st,adc-freq: ADC Clock speed (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
- st,ave-ctrl: Sample average control (0 -> 1 sample, 1 -> 2 samples, 2 -> 4
samples, 3 -> 8 samples)
- st,touch-det-delay: Touch detect interrupt delay (0 -> 10 us, 1 -> 50 us, 2 ->
100 us, 3 -> 500 us, 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) recommended
is 3
- st,settling: Panel driver settling time (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3
-> 1 ms, 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) recommended is 2
- st,fraction-z: Length of the fractional part in z (fraction-z ([0..7]) = Count of
the fractional part) recommended is 7
- st,i-drive: current limit value of the touchscreen drivers (0 -> 20 mA typical 35
mA max, 1 -> 50 mA typical 80 mA max)
Node name must be stmpe_touchscreen and should be child node of stmpe node to
which it belongs.
Example:
stmpe_touchscreen {
compatible = "st,stmpe-ts";
st,sample-time = <4>;
st,mod-12b = <1>;
st,ref-sel = <0>;
st,adc-freq = <1>;
st,ave-ctrl = <1>;
st,touch-det-delay = <2>;
st,settling = <2>;
st,fraction-z = <7>;
st,i-drive = <1>;
};

2
Documentation/hwmon/fam15h_power
View File

@ -10,7 +10,7 @@ Supported chips:
BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors
(not yet published)
Author: Andreas Herrmann <andreas.herrmann3@amd.com>
Author: Andreas Herrmann <herrmann.der.user@googlemail.com>
Description
-----------

5
MAINTAINERS
View File

@ -503,7 +503,7 @@ F: include/linux/altera_uart.h
F: include/linux/altera_jtaguart.h
AMD FAM15H PROCESSOR POWER MONITORING DRIVER
M: Andreas Herrmann <andreas.herrmann3@amd.com>
M: Andreas Herrmann <herrmann.der.user@googlemail.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/fam15h_power
@ -2507,6 +2507,7 @@ M: Joonyoung Shim <jy0922.shim@samsung.com>
M: Seung-Woo Kim <sw0312.kim@samsung.com>
M: Kyungmin Park <kyungmin.park@samsung.com>
L: dri-devel@lists.freedesktop.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git
S: Supported
F: drivers/gpu/drm/exynos
F: include/drm/exynos*
@ -5647,7 +5648,7 @@ S: Maintained
F: drivers/pinctrl/spear/
PKTCDVD DRIVER
M: Peter Osterlund <petero2@telia.com>
M: Jiri Kosina <jkosina@suse.cz>
S: Maintained
F: drivers/block/pktcdvd.c
F: include/linux/pktcdvd.h

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 7
SUBLEVEL = 0
EXTRAVERSION = -rc3
EXTRAVERSION = -rc4
NAME = Terrified Chipmunk
# *DOCUMENTATION*

14
arch/arm/mach-omap1/board-nokia770.c
View File

@ -112,17 +112,6 @@ static void __init mipid_dev_init(void)
omapfb_set_lcd_config(&nokia770_lcd_config);
}
static void __init ads7846_dev_init(void)
{
if (gpio_request(ADS7846_PENDOWN_GPIO, "ADS7846 pendown") < 0)
printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
}
static int ads7846_get_pendown_state(void)
{
return !gpio_get_value(ADS7846_PENDOWN_GPIO);
}
static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = {
.x_max = 0x0fff,
.y_max = 0x0fff,
@ -131,7 +120,7 @@ static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata =
.debounce_max = 10,
.debounce_tol = 3,
.debounce_rep = 1,
.get_pendown_state = ads7846_get_pendown_state,
.gpio_pendown = ADS7846_PENDOWN_GPIO,
};
static struct spi_board_info nokia770_spi_board_info[] __initdata = {
@ -241,7 +230,6 @@ static void __init omap_nokia770_init(void)
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
hwa742_dev_init();
ads7846_dev_init();
mipid_dev_init();
omap1_usb_init(&nokia770_usb_config);
nokia770_mmc_init();

93
arch/arm/mach-ux500/board-mop500-stuib.c
View File

@ -77,9 +77,6 @@ static struct i2c_board_info __initdata mop500_i2c0_devices_stuib[] = {
* BU21013 ROHM touchscreen interface on the STUIBs
*/
/* tracks number of bu21013 devices being enabled */
static int bu21013_devices;
#define TOUCH_GPIO_PIN 84
#define TOUCH_XMAX 384
@ -88,85 +85,8 @@ static int bu21013_devices;
#define PRCMU_CLOCK_OCR 0x1CC
#define TSC_EXT_CLOCK_9_6MHZ 0x840000
/**
* bu21013_gpio_board_init : configures the touch panel.
* @reset_pin: reset pin number
* This function can be used to configures
* the voltage and reset the touch panel controller.
*/
static int bu21013_gpio_board_init(int reset_pin)
{
int retval = 0;
bu21013_devices++;
if (bu21013_devices == 1) {
retval = gpio_request(reset_pin, "touchp_reset");
if (retval) {
printk(KERN_ERR "Unable to request gpio reset_pin");
return retval;
}
retval = gpio_direction_output(reset_pin, 1);
if (retval < 0) {
printk(KERN_ERR "%s: gpio direction failed\n",
__func__);
return retval;
}
}
return retval;
}
/**
* bu21013_gpio_board_exit : deconfigures the touch panel controller
* @reset_pin: reset pin number
* This function can be used to deconfigures the chip selection
* for touch panel controller.
*/
static int bu21013_gpio_board_exit(int reset_pin)
{
int retval = 0;
if (bu21013_devices == 1) {
retval = gpio_direction_output(reset_pin, 0);
if (retval < 0) {
printk(KERN_ERR "%s: gpio direction failed\n",
__func__);
return retval;
}
gpio_set_value(reset_pin, 0);
}
bu21013_devices--;
return retval;
}
/**
* bu21013_read_pin_val : get the interrupt pin value
* This function can be used to get the interrupt pin value for touch panel
* controller.
*/
static int bu21013_read_pin_val(void)
{
return gpio_get_value(TOUCH_GPIO_PIN);
}
static struct bu21013_platform_device tsc_plat_device = {
.cs_en = bu21013_gpio_board_init,
.cs_dis = bu21013_gpio_board_exit,
.irq_read_val = bu21013_read_pin_val,
.irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN),
.touch_x_max = TOUCH_XMAX,
.touch_y_max = TOUCH_YMAX,
.ext_clk = false,
.x_flip = false,
.y_flip = true,
};
static struct bu21013_platform_device tsc_plat2_device = {
.cs_en = bu21013_gpio_board_init,
.cs_dis = bu21013_gpio_board_exit,
.irq_read_val = bu21013_read_pin_val,
.irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN),
.touch_pin = TOUCH_GPIO_PIN,
.touch_x_max = TOUCH_XMAX,
.touch_y_max = TOUCH_YMAX,
.ext_clk = false,
@ -181,21 +101,16 @@ static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = {
},
{
I2C_BOARD_INFO("bu21013_tp", 0x5D),
.platform_data = &tsc_plat2_device,
.platform_data = &tsc_plat_device,
},
};
void __init mop500_stuib_init(void)
{
if (machine_is_hrefv60()) {
if (machine_is_hrefv60())
tsc_plat_device.cs_pin = HREFV60_TOUCH_RST_GPIO;
tsc_plat2_device.cs_pin = HREFV60_TOUCH_RST_GPIO;
} else {
else
tsc_plat_device.cs_pin = GPIO_BU21013_CS;
tsc_plat2_device.cs_pin = GPIO_BU21013_CS;
}
mop500_uib_i2c_add(0, mop500_i2c0_devices_stuib,
ARRAY_SIZE(mop500_i2c0_devices_stuib));

14
arch/arm/xen/hypercall.S
View File

@ -48,20 +48,16 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/opcodes-virt.h>
#include <xen/interface/xen.h>
/* HVC 0xEA1 */
#ifdef CONFIG_THUMB2_KERNEL
#define xen_hvc .word 0xf7e08ea1
#else
#define xen_hvc .word 0xe140ea71
#endif
#define XEN_IMM 0xEA1
#define HYPERCALL_SIMPLE(hypercall) \
ENTRY(HYPERVISOR_##hypercall) \
mov r12, #__HYPERVISOR_##hypercall; \
xen_hvc; \
__HVC(XEN_IMM); \
mov pc, lr; \
ENDPROC(HYPERVISOR_##hypercall)
@ -76,7 +72,7 @@ ENTRY(HYPERVISOR_##hypercall) \
stmdb sp!, {r4} \
ldr r4, [sp, #4] \
mov r12, #__HYPERVISOR_##hypercall; \
xen_hvc \
__HVC(XEN_IMM); \
ldm sp!, {r4} \
mov pc, lr \
ENDPROC(HYPERVISOR_##hypercall)
@ -100,7 +96,7 @@ ENTRY(privcmd_call)
mov r2, r3
ldr r3, [sp, #8]
ldr r4, [sp, #4]
xen_hvc
__HVC(XEN_IMM)
ldm sp!, {r4}
mov pc, lr
ENDPROC(privcmd_call);

1
arch/frv/Kconfig
View File

@ -13,6 +13,7 @@ config FRV
select GENERIC_CPU_DEVICES
select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_KERNEL_THREAD
select GENERIC_KERNEL_EXECVE
config ZONE_DMA
bool

10
arch/frv/boot/Makefile
View File

@ -17,6 +17,8 @@ PARAMS_PHYS = 0x0207c000
INITRD_PHYS = 0x02180000
INITRD_VIRT = 0x02180000
OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment
#
# If you don't define ZRELADDR above,
# then it defaults to ZTEXTADDR
@ -32,18 +34,18 @@ Image: $(obj)/Image
targets: $(obj)/Image
$(obj)/Image: vmlinux FORCE
$(OBJCOPY) -O binary -R .note -R .comment -S vmlinux $@
$(OBJCOPY) $(OBJCOPYFLAGS) -S vmlinux $@
#$(obj)/Image: $(CONFIGURE) $(SYSTEM)
# $(OBJCOPY) -O binary -R .note -R .comment -g -S $(SYSTEM) $@
# $(OBJCOPY) $(OBJCOPYFLAGS) -g -S $(SYSTEM) $@
bzImage: zImage
zImage: $(CONFIGURE) compressed/$(LINUX)
$(OBJCOPY) -O binary -R .note -R .comment -S compressed/$(LINUX) $@
$(OBJCOPY) $(OBJCOPYFLAGS) -S compressed/$(LINUX) $@
bootpImage: bootp/bootp
$(OBJCOPY) -O binary -R .note -R .comment -S bootp/bootp $@
$(OBJCOPY) $(OBJCOPYFLAGS) -S bootp/bootp $@
compressed/$(LINUX): $(LINUX) dep
@$(MAKE) -C compressed $(LINUX)

1
arch/frv/include/asm/unistd.h
View File

@ -30,7 +30,6 @@
#define __ARCH_WANT_SYS_RT_SIGACTION
#define __ARCH_WANT_SYS_RT_SIGSUSPEND
#define __ARCH_WANT_SYS_EXECVE
#define __ARCH_WANT_KERNEL_EXECVE
/*
* "Conditional" syscalls

28
arch/frv/kernel/entry.S
View File

@ -869,11 +869,6 @@ ret_from_kernel_thread:
call schedule_tail
calll.p @(gr21,gr0)
or gr20,gr20,gr8
bra sys_exit
.globl ret_from_kernel_execve
ret_from_kernel_execve:
ori gr28,0,sp
bra __syscall_exit
###################################################################################################
@ -1080,27 +1075,10 @@ __entry_return_from_kernel_interrupt:
subicc gr5,#0,gr0,icc0
beq icc0,#0,__entry_return_direct
__entry_preempt_need_resched:
ldi @(gr15,#TI_FLAGS),gr4
andicc gr4,#_TIF_NEED_RESCHED,gr0,icc0
beq icc0,#1,__entry_return_direct
setlos #PREEMPT_ACTIVE,gr5
sti gr5,@(gr15,#TI_FLAGS)
andi gr23,#~PSR_PIL,gr23
movgs gr23,psr
call schedule
sti gr0,@(gr15,#TI_PRE_COUNT)
movsg psr,gr23
ori gr23,#PSR_PIL_14,gr23
movgs gr23,psr
bra __entry_preempt_need_resched
#else
bra __entry_return_direct
subcc gr0,gr0,gr0,icc2 /* set Z and clear C */
call preempt_schedule_irq
#endif
bra __entry_return_direct
###############################################################################

5
arch/frv/kernel/process.c
View File

@ -181,6 +181,9 @@ int copy_thread(unsigned long clone_flags,
childregs = (struct pt_regs *)
(task_stack_page(p) + THREAD_SIZE - FRV_FRAME0_SIZE);
/* set up the userspace frame (the only place that the USP is stored) */
*childregs = *__kernel_frame0_ptr;
p->set_child_tid = p->clear_child_tid = NULL;
p->thread.frame = childregs;
@ -191,10 +194,8 @@ int copy_thread(unsigned long clone_flags,
p->thread.frame0 = childregs;
if (unlikely(!regs)) {
memset(childregs, 0, sizeof(struct pt_regs));
childregs->gr9 = usp; /* function */
childregs->gr8 = arg;
childregs->psr = PSR_S;
p->thread.pc = (unsigned long) ret_from_kernel_thread;
save_user_regs(p->thread.user);
return 0;

1
arch/frv/mb93090-mb00/pci-dma-nommu.c
View File

@ -11,6 +11,7 @@
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/export.h>
#include <linux/dma-mapping.h>
#include <linux/list.h>
#include <linux/pci.h>

1
arch/x86/include/asm/xen/hypervisor.h
View File

@ -33,7 +33,6 @@
#ifndef _ASM_X86_XEN_HYPERVISOR_H
#define _ASM_X86_XEN_HYPERVISOR_H
/* arch/i386/kernel/setup.c */
extern struct shared_info *HYPERVISOR_shared_info;
extern struct start_info *xen_start_info;

60
arch/x86/kvm/x86.c
View File

@ -3779,7 +3779,7 @@ static int write_exit_mmio(struct kvm_vcpu *vcpu, gpa_t gpa,
{
struct kvm_mmio_fragment *frag = &vcpu->mmio_fragments[0];
memcpy(vcpu->run->mmio.data, frag->data, frag->len);
memcpy(vcpu->run->mmio.data, frag->data, min(8u, frag->len));
return X86EMUL_CONTINUE;
}
@ -3832,18 +3832,11 @@ mmio:
bytes -= handled;
val += handled;
while (bytes) {
unsigned now = min(bytes, 8U);
frag = &vcpu->mmio_fragments[vcpu->mmio_nr_fragments++];
frag->gpa = gpa;
frag->data = val;
frag->len = now;
gpa += now;
val += now;
bytes -= now;
}
WARN_ON(vcpu->mmio_nr_fragments >= KVM_MAX_MMIO_FRAGMENTS);
frag = &vcpu->mmio_fragments[vcpu->mmio_nr_fragments++];
frag->gpa = gpa;
frag->data = val;
frag->len = bytes;
return X86EMUL_CONTINUE;
}
@ -3890,7 +3883,7 @@ int emulator_read_write(struct x86_emulate_ctxt *ctxt, unsigned long addr,
vcpu->mmio_needed = 1;
vcpu->mmio_cur_fragment = 0;
vcpu->run->mmio.len = vcpu->mmio_fragments[0].len;
vcpu->run->mmio.len = min(8u, vcpu->mmio_fragments[0].len);
vcpu->run->mmio.is_write = vcpu->mmio_is_write = ops->write;
vcpu->run->exit_reason = KVM_EXIT_MMIO;
vcpu->run->mmio.phys_addr = gpa;
@ -5522,28 +5515,44 @@ static int complete_emulated_pio(struct kvm_vcpu *vcpu)
*
* read:
* for each fragment
* write gpa, len
* exit
* copy data
* for each mmio piece in the fragment
* write gpa, len
* exit
* copy data
* execute insn
*
* write:
* for each fragment
* write gpa, len
* copy data
* exit
* for each mmio piece in the fragment
* write gpa, len
* copy data
* exit
*/
static int complete_emulated_mmio(struct kvm_vcpu *vcpu)
{
struct kvm_run *run = vcpu->run;
struct kvm_mmio_fragment *frag;
unsigned len;
BUG_ON(!vcpu->mmio_needed);
/* Complete previous fragment */
frag = &vcpu->mmio_fragments[vcpu->mmio_cur_fragment++];
frag = &vcpu->mmio_fragments[vcpu->mmio_cur_fragment];
len = min(8u, frag->len);
if (!vcpu->mmio_is_write)
memcpy(frag->data, run->mmio.data, frag->len);
memcpy(frag->data, run->mmio.data, len);
if (frag->len <= 8) {
/* Switch to the next fragment. */
frag++;
vcpu->mmio_cur_fragment++;
} else {
/* Go forward to the next mmio piece. */
frag->data += len;
frag->gpa += len;
frag->len -= len;
}
if (vcpu->mmio_cur_fragment == vcpu->mmio_nr_fragments) {
vcpu->mmio_needed = 0;
if (vcpu->mmio_is_write)
@ -5551,13 +5560,12 @@ static int complete_emulated_mmio(struct kvm_vcpu *vcpu)
vcpu->mmio_read_completed = 1;
return complete_emulated_io(vcpu);
}
/* Initiate next fragment */
++frag;
run->exit_reason = KVM_EXIT_MMIO;
run->mmio.phys_addr = frag->gpa;
if (vcpu->mmio_is_write)
memcpy(run->mmio.data, frag->data, frag->len);
run->mmio.len = frag->len;
memcpy(run->mmio.data, frag->data, min(8u, frag->len));
run->mmio.len = min(8u, frag->len);
run->mmio.is_write = vcpu->mmio_is_write;
vcpu->arch.complete_userspace_io = complete_emulated_mmio;
return 0;

21
arch/x86/xen/mmu.c
View File

@ -1288,6 +1288,25 @@ unsigned long xen_read_cr2_direct(void)
return this_cpu_read(xen_vcpu_info.arch.cr2);
}
void xen_flush_tlb_all(void)
{
struct mmuext_op *op;
struct multicall_space mcs;
trace_xen_mmu_flush_tlb_all(0);
preempt_disable();
mcs = xen_mc_entry(sizeof(*op));
op = mcs.args;
op->cmd = MMUEXT_TLB_FLUSH_ALL;
MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
xen_mc_issue(PARAVIRT_LAZY_MMU);
preempt_enable();
}
static void xen_flush_tlb(void)
{
struct mmuext_op *op;
@ -2518,7 +2537,7 @@ int xen_remap_domain_mfn_range(struct vm_area_struct *vma,
err = 0;
out:
flush_tlb_all();
xen_flush_tlb_all();
return err;
}

2
arch/xtensa/Kconfig
View File

@ -13,6 +13,8 @@ config XTENSA
select GENERIC_CPU_DEVICES
select MODULES_USE_ELF_RELA
select GENERIC_PCI_IOMAP
select GENERIC_KERNEL_THREAD
select GENERIC_KERNEL_EXECVE
select ARCH_WANT_OPTIONAL_GPIOLIB
help
Xtensa processors are 32-bit RISC machines designed by Tensilica

4
arch/xtensa/include/asm/io.h
View File

@ -62,6 +62,10 @@ static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
static inline void iounmap(volatile void __iomem *addr)
{
}
#define virt_to_bus virt_to_phys
#define bus_to_virt phys_to_virt
#endif /* CONFIG_MMU */
/*

4
arch/xtensa/include/asm/processor.h
View File

@ -152,6 +152,7 @@ struct thread_struct {
/* Clearing a0 terminates the backtrace. */
#define start_thread(regs, new_pc, new_sp) \
memset(regs, 0, sizeof(*regs)); \
regs->pc = new_pc; \
regs->ps = USER_PS_VALUE; \
regs->areg[1] = new_sp; \
@ -168,9 +169,6 @@ struct mm_struct;
/* Free all resources held by a thread. */
#define release_thread(thread) do { } while(0)
/* Create a kernel thread without removing it from tasklists */
extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
/* Copy and release all segment info associated with a VM */
#define copy_segments(p, mm) do { } while(0)
#define release_segments(mm) do { } while(0)

2
arch/xtensa/include/asm/syscall.h
View File

@ -10,7 +10,7 @@
struct pt_regs;
struct sigaction;
asmlinkage long xtensa_execve(char*, char**, char**, struct pt_regs*);
asmlinkage long sys_execve(char*, char**, char**, struct pt_regs*);
asmlinkage long xtensa_clone(unsigned long, unsigned long, struct pt_regs*);
asmlinkage long xtensa_ptrace(long, long, long, long);
asmlinkage long xtensa_sigreturn(struct pt_regs*);

15
arch/xtensa/include/asm/unistd.h
View File

@ -1,16 +1,9 @@
/*
* include/asm-xtensa/unistd.h
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2001 - 2005 Tensilica Inc.
*/
#ifndef _XTENSA_UNISTD_H
#define _XTENSA_UNISTD_H
#define __ARCH_WANT_SYS_EXECVE
#include <uapi/asm/unistd.h>
/*
* "Conditional" syscalls
*
@ -37,3 +30,5 @@
#define __IGNORE_mmap /* use mmap2 */
#define __IGNORE_vfork /* use clone */
#define __IGNORE_fadvise64 /* use fadvise64_64 */
#endif /* _XTENSA_UNISTD_H */

16
arch/xtensa/include/uapi/asm/unistd.h
View File

@ -1,14 +1,4 @@
/*
* include/asm-xtensa/unistd.h
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2001 - 2012 Tensilica Inc.
*/
#ifndef _UAPI_XTENSA_UNISTD_H
#if !defined(_UAPI_XTENSA_UNISTD_H) || defined(__SYSCALL)
#define _UAPI_XTENSA_UNISTD_H
#ifndef __SYSCALL
@ -272,7 +262,7 @@ __SYSCALL(115, sys_sendmmsg, 4)
#define __NR_clone 116
__SYSCALL(116, xtensa_clone, 5)
#define __NR_execve 117
__SYSCALL(117, xtensa_execve, 3)
__SYSCALL(117, sys_execve, 3)
#define __NR_exit 118
__SYSCALL(118, sys_exit, 1)
#define __NR_exit_group 119
@ -759,4 +749,6 @@ __SYSCALL(331, sys_kcmp, 5)
#define SYS_XTENSA_COUNT 5 /* count */
#undef __SYSCALL
#endif /* _UAPI_XTENSA_UNISTD_H */

57
arch/xtensa/kernel/entry.S
View File

@ -1832,50 +1832,6 @@ ENTRY(system_call)
retw
/*
* Create a kernel thread
*
* int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
* a2 a2 a3 a4
*/
ENTRY(kernel_thread)
entry a1, 16
mov a5, a2 # preserve fn over syscall
mov a7, a3 # preserve args over syscall
movi a3, _CLONE_VM | _CLONE_UNTRACED
movi a2, __NR_clone
or a6, a4, a3 # arg0: flags
mov a3, a1 # arg1: sp
syscall
beq a3, a1, 1f # branch if parent
mov a6, a7 # args
callx4 a5 # fn(args)
movi a2, __NR_exit
syscall # return value of fn(args) still in a6
1: retw
/*
* Do a system call from kernel instead of calling sys_execve, so we end up
* with proper pt_regs.
*
* int kernel_execve(const char *fname, char *const argv[], charg *const envp[])
* a2 a2 a3 a4
*/
ENTRY(kernel_execve)
entry a1, 16
mov a6, a2 # arg0 is in a6
movi a2, __NR_execve
syscall
retw
/*
* Task switch.
*
@ -1958,3 +1914,16 @@ ENTRY(ret_from_fork)
j common_exception_return
/*
* Kernel thread creation helper
* On entry, set up by copy_thread: a2 = thread_fn, a3 = thread_fn arg
* left from _switch_to: a6 = prev
*/
ENTRY(ret_from_kernel_thread)
call4 schedule_tail
mov a6, a3
callx4 a2
j common_exception_return
ENDPROC(ret_from_kernel_thread)

128
arch/xtensa/kernel/process.c
View File

@ -45,6 +45,7 @@
#include <asm/regs.h>
extern void ret_from_fork(void);
extern void ret_from_kernel_thread(void);
struct task_struct *current_set[NR_CPUS] = {&init_task, };
@ -158,18 +159,30 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
/*
* Copy thread.
*
* There are two modes in which this function is called:
* 1) Userspace thread creation,
* regs != NULL, usp_thread_fn is userspace stack pointer.
* It is expected to copy parent regs (in case CLONE_VM is not set
* in the clone_flags) and set up passed usp in the childregs.
* 2) Kernel thread creation,
* regs == NULL, usp_thread_fn is the function to run in the new thread
* and thread_fn_arg is its parameter.
* childregs are not used for the kernel threads.
*
* The stack layout for the new thread looks like this:
*
* +------------------------+ <- sp in childregs (= tos)
* +------------------------+
* | childregs |
* +------------------------+ <- thread.sp = sp in dummy-frame
* | dummy-frame | (saved in dummy-frame spill-area)
* +------------------------+
*
* We create a dummy frame to return to ret_from_fork:
* a0 points to ret_from_fork (simulating a call4)
* We create a dummy frame to return to either ret_from_fork or
* ret_from_kernel_thread:
* a0 points to ret_from_fork/ret_from_kernel_thread (simulating a call4)
* sp points to itself (thread.sp)
* a2, a3 are unused.
* a2, a3 are unused for userspace threads,
* a2 points to thread_fn, a3 holds thread_fn arg for kernel threads.
*
* Note: This is a pristine frame, so we don't need any spill region on top of
* childregs.
@ -185,43 +198,63 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
* involved. Much simpler to just not copy those live frames across.
*/
int copy_thread(unsigned long clone_flags, unsigned long usp,
unsigned long unused,
struct task_struct * p, struct pt_regs * regs)
int copy_thread(unsigned long clone_flags, unsigned long usp_thread_fn,
unsigned long thread_fn_arg,
struct task_struct *p, struct pt_regs *unused)
{
struct pt_regs *childregs;
unsigned long tos;
int user_mode = user_mode(regs);
struct pt_regs *childregs = task_pt_regs(p);
#if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS)
struct thread_info *ti;
#endif
/* Set up new TSS. */
tos = (unsigned long)task_stack_page(p) + THREAD_SIZE;
if (user_mode)
childregs = (struct pt_regs*)(tos - PT_USER_SIZE);
else
childregs = (struct pt_regs*)tos - 1;
/* This does not copy all the regs. In a bout of brilliance or madness,
ARs beyond a0-a15 exist past the end of the struct. */
*childregs = *regs;
/* Create a call4 dummy-frame: a0 = 0, a1 = childregs. */
*((int*)childregs - 3) = (unsigned long)childregs;
*((int*)childregs - 4) = 0;
childregs->areg[2] = 0;
p->set_child_tid = p->clear_child_tid = NULL;
p->thread.ra = MAKE_RA_FOR_CALL((unsigned long)ret_from_fork, 0x1);
p->thread.sp = (unsigned long)childregs;
if (user_mode(regs)) {
if (!(p->flags & PF_KTHREAD)) {
struct pt_regs *regs = current_pt_regs();
unsigned long usp = usp_thread_fn ?
usp_thread_fn : regs->areg[1];
p->thread.ra = MAKE_RA_FOR_CALL(
(unsigned long)ret_from_fork, 0x1);
/* This does not copy all the regs.
* In a bout of brilliance or madness,
* ARs beyond a0-a15 exist past the end of the struct.
*/
*childregs = *regs;
childregs->areg[1] = usp;
childregs->areg[2] = 0;
/* When sharing memory with the parent thread, the child
usually starts on a pristine stack, so we have to reset
windowbase, windowstart and wmask.
(Note that such a new thread is required to always create
an initial call4 frame)
The exception is vfork, where the new thread continues to
run on the parent's stack until it calls execve. This could
be a call8 or call12, which requires a legal stack frame
of the previous caller for the overflow handlers to work.
(Note that it's always legal to overflow live registers).
In this case, ensure to spill at least the stack pointer
of that frame. */
if (clone_flags & CLONE_VM) {
childregs->wmask = 1; /* can't share live windows */
/* check that caller window is live and same stack */
int len = childregs->wmask & ~0xf;
if (regs->areg[1] == usp && len != 0) {
int callinc = (regs->areg[0] >> 30) & 3;
int caller_ars = XCHAL_NUM_AREGS - callinc * 4;
put_user(regs->areg[caller_ars+1],
(unsigned __user*)(usp - 12));
}
childregs->wmask = 1;
childregs->windowstart = 1;
childregs->windowbase = 0;
} else {
int len = childregs->wmask & ~0xf;
memcpy(&childregs->areg[XCHAL_NUM_AREGS - len/4],
@ -230,11 +263,19 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
// FIXME: we need to set THREADPTR in thread_info...
if (clone_flags & CLONE_SETTLS)
childregs->areg[2] = childregs->areg[6];
} else {
/* In kernel space, we start a new thread with a new stack. */
childregs->wmask = 1;
childregs->areg[1] = tos;
p->thread.ra = MAKE_RA_FOR_CALL(
(unsigned long)ret_from_kernel_thread, 1);
/* pass parameters to ret_from_kernel_thread:
* a2 = thread_fn, a3 = thread_fn arg
*/
*((int *)childregs - 1) = thread_fn_arg;
*((int *)childregs - 2) = usp_thread_fn;
/* Childregs are only used when we're going to userspace
* in which case start_thread will set them up.
*/
}
#if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS)
@ -330,32 +371,5 @@ long xtensa_clone(unsigned long clone_flags, unsigned long newsp,
void __user *child_tid, long a5,
struct pt_regs *regs)
{
if (!newsp)
newsp = regs->areg[1];
return do_fork(clone_flags, newsp, regs, 0, parent_tid, child_tid);
}
/*
* xtensa_execve() executes a new program.
*/
asmlinkage
long xtensa_execve(const char __user *name,
const char __user *const __user *argv,
const char __user *const __user *envp,
long a3, long a4, long a5,
struct pt_regs *regs)
{
long error;
struct filename *filename;
filename = getname(name);
error = PTR_ERR(filename);
if (IS_ERR(filename))
goto out;
error = do_execve(filename->name, argv, envp, regs);
putname(filename);
out:
return error;
}

7
arch/xtensa/kernel/syscall.c
View File

@ -32,10 +32,8 @@ typedef void (*syscall_t)(void);
syscall_t sys_call_table[__NR_syscall_count] /* FIXME __cacheline_aligned */= {
[0 ... __NR_syscall_count - 1] = (syscall_t)&sys_ni_syscall,
#undef __SYSCALL
#define __SYSCALL(nr,symbol,nargs) [ nr ] = (syscall_t)symbol,
#undef __KERNEL_SYSCALLS__
#include <asm/unistd.h>
#include <uapi/asm/unistd.h>
};
asmlinkage long xtensa_shmat(int shmid, char __user *shmaddr, int shmflg)
@ -49,7 +47,8 @@ asmlinkage long xtensa_shmat(int shmid, char __user *shmaddr, int shmflg)
return (long)ret;
}
asmlinkage long xtensa_fadvise64_64(int fd, int advice, unsigned long long offset, unsigned long long len)
asmlinkage long xtensa_fadvise64_64(int fd, int advice,
unsigned long long offset, unsigned long long len)
{
return sys_fadvise64_64(fd, offset, len, advice);
}

1
arch/xtensa/kernel/xtensa_ksyms.c
View File

@ -43,7 +43,6 @@ EXPORT_SYMBOL(__strncpy_user);
EXPORT_SYMBOL(clear_page);
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(kernel_thread);
EXPORT_SYMBOL(empty_zero_page);
/*

2
block/Kconfig
View File

@ -89,7 +89,7 @@ config BLK_DEV_INTEGRITY
config BLK_DEV_THROTTLING
bool "Block layer bio throttling support"
depends on BLK_CGROUP=y && EXPERIMENTAL
depends on BLK_CGROUP=y
default n
---help---
Block layer bio throttling support. It can be used to limit

10
block/blk-cgroup.c
View File

@ -285,6 +285,13 @@ static void blkg_destroy_all(struct request_queue *q)
blkg_destroy(blkg);
spin_unlock(&blkcg->lock);
}
/*
* root blkg is destroyed. Just clear the pointer since
* root_rl does not take reference on root blkg.
*/
q->root_blkg = NULL;
q->root_rl.blkg = NULL;
}
static void blkg_rcu_free(struct rcu_head *rcu_head)
@ -326,6 +333,9 @@ struct request_list *__blk_queue_next_rl(struct request_list *rl,
*/
if (rl == &q->root_rl) {
ent = &q->blkg_list;
/* There are no more block groups, hence no request lists */
if (list_empty(ent))
return NULL;
} else {
blkg = container_of(rl, struct blkcg_gq, rl);
ent = &blkg->q_node;

3
block/blk-core.c
View File

@ -2868,7 +2868,8 @@ static int plug_rq_cmp(void *priv, struct list_head *a, struct list_head *b)
struct request *rqa = container_of(a, struct request, queuelist);
struct request *rqb = container_of(b, struct request, queuelist);
return !(rqa->q <= rqb->q);
return !(rqa->q < rqb->q ||
(rqa->q == rqb->q && blk_rq_pos(rqa) < blk_rq_pos(rqb)));
}
/*

11
drivers/acpi/video.c
View File

@ -1345,12 +1345,15 @@ static int
acpi_video_bus_get_devices(struct acpi_video_bus *video,
struct acpi_device *device)
{
int status;
int status = 0;
struct acpi_device *dev;
status = acpi_video_device_enumerate(video);
if (status)
return status;
/*
* There are systems where video module known to work fine regardless
* of broken _DOD and ignoring returned value here doesn't cause
* any issues later.
*/
acpi_video_device_enumerate(video);
list_for_each_entry(dev, &device->children, node) {

15
drivers/block/Kconfig
View File

@ -131,6 +131,7 @@ config BLK_CPQ_DA
config BLK_CPQ_CISS_DA
tristate "Compaq Smart Array 5xxx support"
depends on PCI
select CHECK_SIGNATURE
help
This is the driver for Compaq Smart Array 5xxx controllers.
Everyone using these boards should say Y here.
@ -166,8 +167,8 @@ config BLK_DEV_DAC960
module will be called DAC960.
config BLK_DEV_UMEM
tristate "Micro Memory MM5415 Battery Backed RAM support (EXPERIMENTAL)"
depends on PCI && EXPERIMENTAL
tristate "Micro Memory MM5415 Battery Backed RAM support"
depends on PCI
---help---
Saying Y here will include support for the MM5415 family of
battery backed (Non-volatile) RAM cards.
@ -430,8 +431,8 @@ config CDROM_PKTCDVD_BUFFERS
a disc is opened for writing.
config CDROM_PKTCDVD_WCACHE
bool "Enable write caching (EXPERIMENTAL)"
depends on CDROM_PKTCDVD && EXPERIMENTAL
bool "Enable write caching"
depends on CDROM_PKTCDVD
help
If enabled, write caching will be set for the CD-R/W device. For now
this option is dangerous unless the CD-RW media is known good, as we
@ -508,8 +509,8 @@ config XEN_BLKDEV_BACKEND
config VIRTIO_BLK
tristate "Virtio block driver (EXPERIMENTAL)"
depends on EXPERIMENTAL && VIRTIO
tristate "Virtio block driver"
depends on VIRTIO
---help---
This is the virtual block driver for virtio. It can be used with
lguest or QEMU based VMMs (like KVM or Xen). Say Y or M.
@ -528,7 +529,7 @@ config BLK_DEV_HD
config BLK_DEV_RBD
tristate "Rados block device (RBD)"
depends on INET && EXPERIMENTAL && BLOCK
depends on INET && BLOCK
select CEPH_LIB
select LIBCRC32C
select CRYPTO_AES

1
drivers/block/cciss.c
View File

@ -5205,7 +5205,6 @@ static void cciss_shutdown(struct pci_dev *pdev)
return;
}
/* write all data in the battery backed cache to disk */
memset(flush_buf, 0, 4);
return_code = sendcmd_withirq(h, CCISS_CACHE_FLUSH, flush_buf,
4, 0, CTLR_LUNID, TYPE_CMD);
kfree(flush_buf);

90
drivers/block/floppy.c
View File

@ -4109,12 +4109,19 @@ static struct platform_driver floppy_driver = {
static struct platform_device floppy_device[N_DRIVE];
static bool floppy_available(int drive)
{
if (!(allowed_drive_mask & (1 << drive)))
return false;
if (fdc_state[FDC(drive)].version == FDC_NONE)
return false;
return true;
}
static struct kobject *floppy_find(dev_t dev, int *part, void *data)
{
int drive = (*part & 3) | ((*part & 0x80) >> 5);
if (drive >= N_DRIVE ||
!(allowed_drive_mask & (1 << drive)) ||
fdc_state[FDC(drive)].version == FDC_NONE)
if (drive >= N_DRIVE || !floppy_available(drive))
return NULL;
if (((*part >> 2) & 0x1f) >= ARRAY_SIZE(floppy_type))
return NULL;
@ -4124,8 +4131,7 @@ static struct kobject *floppy_find(dev_t dev, int *part, void *data)
static int __init do_floppy_init(void)
{
int i, unit, drive;
int err, dr;
int i, unit, drive, err;
set_debugt();
interruptjiffies = resultjiffies = jiffies;
@ -4137,34 +4143,32 @@ static int __init do_floppy_init(void)
raw_cmd = NULL;
for (dr = 0; dr < N_DRIVE; dr++) {
disks[dr] = alloc_disk(1);
if (!disks[dr]) {
floppy_wq = alloc_ordered_workqueue("floppy", 0);
if (!floppy_wq)
return -ENOMEM;
for (drive = 0; drive < N_DRIVE; drive++) {
disks[drive] = alloc_disk(1);
if (!disks[drive]) {
err = -ENOMEM;
goto out_put_disk;
}
floppy_wq = alloc_ordered_workqueue("floppy", 0);
if (!floppy_wq) {
disks[drive]->queue = blk_init_queue(do_fd_request, &floppy_lock);
if (!disks[drive]->queue) {
err = -ENOMEM;
goto out_put_disk;
}
disks[dr]->queue = blk_init_queue(do_fd_request, &floppy_lock);
if (!disks[dr]->queue) {
err = -ENOMEM;
goto out_destroy_workq;
}
blk_queue_max_hw_sectors(disks[drive]->queue, 64);
disks[drive]->major = FLOPPY_MAJOR;
disks[drive]->first_minor = TOMINOR(drive);
disks[drive]->fops = &floppy_fops;
sprintf(disks[drive]->disk_name, "fd%d", drive);
blk_queue_max_hw_sectors(disks[dr]->queue, 64);
disks[dr]->major = FLOPPY_MAJOR;
disks[dr]->first_minor = TOMINOR(dr);
disks[dr]->fops = &floppy_fops;
sprintf(disks[dr]->disk_name, "fd%d", dr);
init_timer(&motor_off_timer[dr]);
motor_off_timer[dr].data = dr;
motor_off_timer[dr].function = motor_off_callback;
init_timer(&motor_off_timer[drive]);
motor_off_timer[drive].data = drive;
motor_off_timer[drive].function = motor_off_callback;
}
err = register_blkdev(FLOPPY_MAJOR, "fd");
@ -4282,9 +4286,7 @@ static int __init do_floppy_init(void)
}
for (drive = 0; drive < N_DRIVE; drive++) {
if (!(allowed_drive_mask & (1 << drive)))
continue;
if (fdc_state[FDC(drive)].version == FDC_NONE)
if (!floppy_available(drive))
continue;
floppy_device[drive].name = floppy_device_name;
@ -4293,7 +4295,7 @@ static int __init do_floppy_init(void)
err = platform_device_register(&floppy_device[drive]);
if (err)
goto out_release_dma;
goto out_remove_drives;
err = device_create_file(&floppy_device[drive].dev,
&dev_attr_cmos);
@ -4311,29 +4313,34 @@ static int __init do_floppy_init(void)
out_unreg_platform_dev:
platform_device_unregister(&floppy_device[drive]);
out_remove_drives:
while (drive--) {
if (floppy_available(drive)) {
del_gendisk(disks[drive]);
device_remove_file(&floppy_device[drive].dev, &dev_attr_cmos);
platform_device_unregister(&floppy_device[drive]);
}
}
out_release_dma:
if (atomic_read(&usage_count))
floppy_release_irq_and_dma();
out_unreg_region:
blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256);
platform_driver_unregister(&floppy_driver);
out_destroy_workq:
destroy_workqueue(floppy_wq);
out_unreg_blkdev:
unregister_blkdev(FLOPPY_MAJOR, "fd");
out_put_disk:
while (dr--) {
del_timer_sync(&motor_off_timer[dr]);
if (disks[dr]->queue) {
blk_cleanup_queue(disks[dr]->queue);
/*
* put_disk() is not paired with add_disk() and
* will put queue reference one extra time. fix it.
*/
disks[dr]->queue = NULL;
for (drive = 0; drive < N_DRIVE; drive++) {
if (!disks[drive])
break;
if (disks[drive]->queue) {
del_timer_sync(&motor_off_timer[drive]);
blk_cleanup_queue(disks[drive]->queue);
disks[drive]->queue = NULL;
}
put_disk(disks[dr]);
put_disk(disks[drive]);
}
destroy_workqueue(floppy_wq);
return err;
}
@ -4551,8 +4558,7 @@ static void __exit floppy_module_exit(void)
for (drive = 0; drive < N_DRIVE; drive++) {
del_timer_sync(&motor_off_timer[drive]);
if ((allowed_drive_mask & (1 << drive)) &&
fdc_state[FDC(drive)].version != FDC_NONE) {
if (floppy_available(drive)) {
del_gendisk(disks[drive]);
device_remove_file(&floppy_device[drive].dev, &dev_attr_cmos);
platform_device_unregister(&floppy_device[drive]);

17
drivers/block/loop.c
View File

@ -976,8 +976,21 @@ static int loop_clr_fd(struct loop_device *lo)
if (lo->lo_state != Lo_bound)
return -ENXIO;
if (lo->lo_refcnt > 1) /* we needed one fd for the ioctl */
return -EBUSY;
/*
* If we've explicitly asked to tear down the loop device,
* and it has an elevated reference count, set it for auto-teardown when
* the last reference goes away. This stops $!~#$@ udev from
* preventing teardown because it decided that it needs to run blkid on
* the loopback device whenever they appear. xfstests is notorious for
* failing tests because blkid via udev races with a losetup
* <dev>/do something like mkfs/losetup -d <dev> causing the losetup -d
* command to fail with EBUSY.
*/
if (lo->lo_refcnt > 1) {
lo->lo_flags |= LO_FLAGS_AUTOCLEAR;
mutex_unlock(&lo->lo_ctl_mutex);
return 0;
}
if (filp == NULL)
return -EINVAL;

19
drivers/block/mtip32xx/mtip32xx.c
View File

@ -2035,8 +2035,9 @@ static unsigned int implicit_sector(unsigned char command,
}
return rv;
}
static void mtip_set_timeout(struct host_to_dev_fis *fis, unsigned int *timeout)
static void mtip_set_timeout(struct driver_data *dd,
struct host_to_dev_fis *fis,
unsigned int *timeout, u8 erasemode)
{
switch (fis->command) {
case ATA_CMD_DOWNLOAD_MICRO:
@ -2044,7 +2045,10 @@ static void mtip_set_timeout(struct host_to_dev_fis *fis, unsigned int *timeout)
break;
case ATA_CMD_SEC_ERASE_UNIT:
case 0xFC:
*timeout = 240000; /* 4 minutes */
if (erasemode)
*timeout = ((*(dd->port->identify + 90) * 2) * 60000);
else
*timeout = ((*(dd->port->identify + 89) * 2) * 60000);
break;
case ATA_CMD_STANDBYNOW1:
*timeout = 120000; /* 2 minutes */
@ -2087,6 +2091,7 @@ static int exec_drive_taskfile(struct driver_data *dd,
unsigned int transfer_size;
unsigned long task_file_data;
int intotal = outtotal + req_task->out_size;
int erasemode = 0;
taskout = req_task->out_size;
taskin = req_task->in_size;
@ -2212,7 +2217,13 @@ static int exec_drive_taskfile(struct driver_data *dd,
fis.lba_hi,
fis.device);
mtip_set_timeout(&fis, &timeout);
/* check for erase mode support during secure erase.*/
if ((fis.command == ATA_CMD_SEC_ERASE_UNIT)
&& (outbuf[0] & MTIP_SEC_ERASE_MODE)) {
erasemode = 1;
}
mtip_set_timeout(dd, &fis, &timeout, erasemode);
/* Determine the correct transfer size.*/
if (force_single_sector)

3
drivers/block/mtip32xx/mtip32xx.h
View File

@ -33,6 +33,9 @@
/* offset of Device Control register in PCIe extended capabilites space */
#define PCIE_CONFIG_EXT_DEVICE_CONTROL_OFFSET 0x48
/* check for erase mode support during secure erase */
#define MTIP_SEC_ERASE_MODE 0x3
/* # of times to retry timed out/failed IOs */
#define MTIP_MAX_RETRIES 2

4
drivers/block/xen-blkback/common.h
View File

@ -158,8 +158,8 @@ struct xen_vbd {
struct block_device *bdev;
/* Cached size parameter. */
sector_t size;
bool flush_support;
bool discard_secure;
unsigned int flush_support:1;
unsigned int discard_secure:1;
};
struct backend_info;

9
drivers/block/xen-blkback/xenbus.c
View File

@ -105,11 +105,10 @@ static struct xen_blkif *xen_blkif_alloc(domid_t domid)
{
struct xen_blkif *blkif;
blkif = kmem_cache_alloc(xen_blkif_cachep, GFP_KERNEL);
blkif = kmem_cache_zalloc(xen_blkif_cachep, GFP_KERNEL);
if (!blkif)
return ERR_PTR(-ENOMEM);
memset(blkif, 0, sizeof(*blkif));
blkif->domid = domid;
spin_lock_init(&blkif->blk_ring_lock);
atomic_set(&blkif->refcnt, 1);
@ -196,7 +195,7 @@ static void xen_blkif_disconnect(struct xen_blkif *blkif)
}
}
void xen_blkif_free(struct xen_blkif *blkif)
static void xen_blkif_free(struct xen_blkif *blkif)
{
if (!atomic_dec_and_test(&blkif->refcnt))
BUG();
@ -257,7 +256,7 @@ static struct attribute_group xen_vbdstat_group = {
VBD_SHOW(physical_device, "%x:%x\n", be->major, be->minor);
VBD_SHOW(mode, "%s\n", be->mode);
int xenvbd_sysfs_addif(struct xenbus_device *dev)
static int xenvbd_sysfs_addif(struct xenbus_device *dev)
{
int error;
@ -281,7 +280,7 @@ fail1: device_remove_file(&dev->dev, &dev_attr_physical_device);
return error;
}
void xenvbd_sysfs_delif(struct xenbus_device *dev)
static void xenvbd_sysfs_delif(struct xenbus_device *dev)
{
sysfs_remove_group(&dev->dev.kobj, &xen_vbdstat_group);
device_remove_file(&dev->dev, &dev_attr_mode);

2
drivers/cpufreq/powernow-k8.c
View File

@ -5,7 +5,7 @@
* http://www.gnu.org/licenses/gpl.html
*
* Maintainer:
* Andreas Herrmann <andreas.herrmann3@amd.com>
* Andreas Herrmann <herrmann.der.user@googlemail.com>
*
* Based on the powernow-k7.c module written by Dave Jones.
* (C) 2003 Dave Jones on behalf of SuSE Labs

2
drivers/gpio/gpio-74x164.c
View File

@ -153,7 +153,7 @@ static int __devinit gen_74x164_probe(struct spi_device *spi)
}
chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers;
chip->buffer = devm_kzalloc(&spi->dev, chip->gpio_chip.ngpio, GFP_KERNEL);
chip->buffer = devm_kzalloc(&spi->dev, chip->registers, GFP_KERNEL);
if (!chip->buffer) {
ret = -ENOMEM;
goto exit_destroy;

4
drivers/gpio/gpio-mvebu.c
View File

@ -244,6 +244,8 @@ static int mvebu_gpio_direction_output(struct gpio_chip *chip, unsigned pin,
if (ret)
return ret;
mvebu_gpio_set(chip, pin, value);
spin_lock_irqsave(&mvchip->lock, flags);
u = readl_relaxed(mvebu_gpioreg_io_conf(mvchip));
u &= ~(1 << pin);
@ -644,7 +646,7 @@ static int __devinit mvebu_gpio_probe(struct platform_device *pdev)
ct->handler = handle_edge_irq;
ct->chip.name = mvchip->chip.label;
irq_setup_generic_chip(gc, IRQ_MSK(ngpios), IRQ_GC_INIT_MASK_CACHE,
irq_setup_generic_chip(gc, IRQ_MSK(ngpios), 0,
IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
/* Setup irq domain on top of the generic chip. */

35
drivers/gpio/gpio-omap.c
View File

@ -251,6 +251,40 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
}
}
/**
* _clear_gpio_debounce - clear debounce settings for a gpio
* @bank: the gpio bank we're acting upon
* @gpio: the gpio number on this @gpio
*
* If a gpio is using debounce, then clear the debounce enable bit and if
* this is the only gpio in this bank using debounce, then clear the debounce
* time too. The debounce clock will also be disabled when calling this function
* if this is the only gpio in the bank using debounce.
*/
static void _clear_gpio_debounce(struct gpio_bank *bank, unsigned gpio)
{
u32 gpio_bit = GPIO_BIT(bank, gpio);
if (!bank->dbck_flag)
return;
if (!(bank->dbck_enable_mask & gpio_bit))
return;
bank->dbck_enable_mask &= ~gpio_bit;
bank->context.debounce_en &= ~gpio_bit;
__raw_writel(bank->context.debounce_en,
bank->base + bank->regs->debounce_en);
if (!bank->dbck_enable_mask) {
bank->context.debounce = 0;
__raw_writel(bank->context.debounce, bank->base +
bank->regs->debounce);
clk_disable(bank->dbck);
bank->dbck_enabled = false;
}
}
static inline void set_gpio_trigger(struct gpio_bank *bank, int gpio,
unsigned trigger)
{
@ -539,6 +573,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio)
_set_gpio_irqenable(bank, gpio, 0);
_clear_gpio_irqstatus(bank, gpio);
_set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE);
_clear_gpio_debounce(bank, gpio);
}
/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */

4
drivers/gpio/gpio-timberdale.c
View File

@ -116,7 +116,7 @@ static void timbgpio_irq_disable(struct irq_data *d)
unsigned long flags;
spin_lock_irqsave(&tgpio->lock, flags);
tgpio->last_ier &= ~(1 << offset);
tgpio->last_ier &= ~(1UL << offset);
iowrite32(tgpio->last_ier, tgpio->membase + TGPIO_IER);
spin_unlock_irqrestore(&tgpio->lock, flags);
}
@ -128,7 +128,7 @@ static void timbgpio_irq_enable(struct irq_data *d)
unsigned long flags;
spin_lock_irqsave(&tgpio->lock, flags);
tgpio->last_ier |= 1 << offset;
tgpio->last_ier |= 1UL << offset;
iowrite32(tgpio->last_ier, tgpio->membase + TGPIO_IER);
spin_unlock_irqrestore(&tgpio->lock, flags);
}

10
drivers/gpio/gpiolib.c
View File

@ -623,9 +623,11 @@ static ssize_t export_store(struct class *class,
*/
status = gpio_request(gpio, "sysfs");
if (status < 0)
if (status < 0) {
if (status == -EPROBE_DEFER)
status = -ENODEV;
goto done;
}
status = gpio_export(gpio, true);
if (status < 0)
gpio_free(gpio);
@ -1191,8 +1193,10 @@ int gpio_request(unsigned gpio, const char *label)
spin_lock_irqsave(&gpio_lock, flags);
if (!gpio_is_valid(gpio))
if (!gpio_is_valid(gpio)) {
status = -EINVAL;
goto done;
}
desc = &gpio_desc[gpio];
chip = desc->chip;
if (chip == NULL)

2
drivers/gpu/drm/exynos/Kconfig
View File

@ -1,6 +1,6 @@
config DRM_EXYNOS
tristate "DRM Support for Samsung SoC EXYNOS Series"
depends on DRM && PLAT_SAMSUNG
depends on DRM && (PLAT_SAMSUNG || ARCH_MULTIPLATFORM)
select DRM_KMS_HELPER
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA

1
drivers/gpu/drm/exynos/exynos_drm_connector.c
View File

@ -374,6 +374,7 @@ struct drm_connector *exynos_drm_connector_create(struct drm_device *dev,
exynos_connector->encoder_id = encoder->base.id;
exynos_connector->manager = manager;
exynos_connector->dpms = DRM_MODE_DPMS_OFF;
connector->dpms = DRM_MODE_DPMS_OFF;
connector->encoder = encoder;
err = drm_mode_connector_attach_encoder(connector, encoder);

33
drivers/gpu/drm/exynos/exynos_drm_encoder.c
View File

@ -43,12 +43,14 @@
* @manager: specific encoder has its own manager to control a hardware
* appropriately and we can access a hardware drawing on this manager.
* @dpms: store the encoder dpms value.
* @updated: indicate whether overlay data updating is needed or not.
*/
struct exynos_drm_encoder {
struct drm_crtc *old_crtc;
struct drm_encoder drm_encoder;
struct exynos_drm_manager *manager;
int dpms;
int dpms;
bool updated;
};
static void exynos_drm_connector_power(struct drm_encoder *encoder, int mode)
@ -85,7 +87,9 @@ static void exynos_drm_encoder_dpms(struct drm_encoder *encoder, int mode)
switch (mode) {
case DRM_MODE_DPMS_ON:
if (manager_ops && manager_ops->apply)
manager_ops->apply(manager->dev);
if (!exynos_encoder->updated)
manager_ops->apply(manager->dev);
exynos_drm_connector_power(encoder, mode);
exynos_encoder->dpms = mode;
break;
@ -94,6 +98,7 @@ static void exynos_drm_encoder_dpms(struct drm_encoder *encoder, int mode)
case DRM_MODE_DPMS_OFF:
exynos_drm_connector_power(encoder, mode);
exynos_encoder->dpms = mode;
exynos_encoder->updated = false;
break;
default:
DRM_ERROR("unspecified mode %d\n", mode);
@ -205,13 +210,22 @@ static void exynos_drm_encoder_prepare(struct drm_encoder *encoder)
static void exynos_drm_encoder_commit(struct drm_encoder *encoder)
{
struct exynos_drm_manager *manager = exynos_drm_get_manager(encoder);
struct exynos_drm_encoder *exynos_encoder = to_exynos_encoder(encoder);
struct exynos_drm_manager *manager = exynos_encoder->manager;
struct exynos_drm_manager_ops *manager_ops = manager->ops;
DRM_DEBUG_KMS("%s\n", __FILE__);
if (manager_ops && manager_ops->commit)
manager_ops->commit(manager->dev);
/*
* this will avoid one issue that overlay data is updated to
* real hardware two times.
* And this variable will be used to check if the data was
* already updated or not by exynos_drm_encoder_dpms function.
*/
exynos_encoder->updated = true;
}
static void exynos_drm_encoder_disable(struct drm_encoder *encoder)
@ -400,19 +414,6 @@ void exynos_drm_encoder_crtc_dpms(struct drm_encoder *encoder, void *data)
if (manager_ops && manager_ops->dpms)
manager_ops->dpms(manager->dev, mode);
/*
* set current mode to new one so that data aren't updated into
* registers by drm_helper_connector_dpms two times.
*
* in case that drm_crtc_helper_set_mode() is called,
* overlay_ops->commit() and manager_ops->commit() callbacks
* can be called two times, first at drm_crtc_helper_set_mode()
* and second at drm_helper_connector_dpms().
* so with this setting, when drm_helper_connector_dpms() is called
* encoder->funcs->dpms() will be ignored.
*/
exynos_encoder->dpms = mode;
/*
* if this condition is ok then it means that the crtc is already
* detached from encoder and last function for detaching is properly

2
drivers/gpu/drm/exynos/exynos_mixer.c
View File

@ -1142,7 +1142,7 @@ static int __devinit mixer_probe(struct platform_device *pdev)
const struct of_device_id *match;
match = of_match_node(of_match_ptr(mixer_match_types),
pdev->dev.of_node);
drv = match->data;
drv = (struct mixer_drv_data *)match->data;
} else {
drv = (struct mixer_drv_data *)
platform_get_device_id(pdev)->driver_data;

3
drivers/gpu/drm/i915/i915_dma.c
View File

@ -1505,7 +1505,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
goto put_gmch;
}
i915_kick_out_firmware_fb(dev_priv);
if (drm_core_check_feature(dev, DRIVER_MODESET))
i915_kick_out_firmware_fb(dev_priv);
pci_set_master(dev->pdev);

2
drivers/gpu/drm/i915/intel_crt.c
View File

@ -729,7 +729,7 @@ void intel_crt_init(struct drm_device *dev)
crt->base.type = INTEL_OUTPUT_ANALOG;
crt->base.cloneable = true;
if (IS_HASWELL(dev))
if (IS_HASWELL(dev) || IS_I830(dev))
crt->base.crtc_mask = (1 << 0);
else
crt->base.crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);

14
drivers/gpu/drm/i915/intel_overlay.c
View File

@ -341,9 +341,17 @@ static int intel_overlay_off(struct intel_overlay *overlay)
intel_ring_emit(ring, flip_addr);
intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
/* turn overlay off */
intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_OFF);
intel_ring_emit(ring, flip_addr);
intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
if (IS_I830(dev)) {
/* Workaround: Don't disable the overlay fully, since otherwise
* it dies on the next OVERLAY_ON cmd. */
intel_ring_emit(ring, MI_NOOP);
intel_ring_emit(ring, MI_NOOP);
intel_ring_emit(ring, MI_NOOP);
} else {
intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_OFF);
intel_ring_emit(ring, flip_addr);
intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
}
intel_ring_advance(ring);
return intel_overlay_do_wait_request(overlay, intel_overlay_off_tail);

2
drivers/gpu/drm/i915/intel_panel.c
View File

@ -435,7 +435,7 @@ int intel_panel_setup_backlight(struct drm_device *dev)
props.type = BACKLIGHT_RAW;
props.max_brightness = _intel_panel_get_max_backlight(dev);
if (props.max_brightness == 0) {
DRM_ERROR("Failed to get maximum backlight value\n");
DRM_DEBUG_DRIVER("Failed to get maximum backlight value\n");
return -ENODEV;
}
dev_priv->backlight =

62
drivers/gpu/drm/i915/intel_sdvo.c
View File

@ -894,6 +894,45 @@ static void intel_sdvo_dump_hdmi_buf(struct intel_sdvo *intel_sdvo)
}
#endif
static bool intel_sdvo_write_infoframe(struct intel_sdvo *intel_sdvo,
unsigned if_index, uint8_t tx_rate,
uint8_t *data, unsigned length)
{
uint8_t set_buf_index[2] = { if_index, 0 };
uint8_t hbuf_size, tmp[8];
int i;
if (!intel_sdvo_set_value(intel_sdvo,
SDVO_CMD_SET_HBUF_INDEX,
set_buf_index, 2))
return false;
if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HBUF_INFO,
&hbuf_size, 1))
return false;
/* Buffer size is 0 based, hooray! */
hbuf_size++;
DRM_DEBUG_KMS("writing sdvo hbuf: %i, hbuf_size %i, hbuf_size: %i\n",
if_index, length, hbuf_size);
for (i = 0; i < hbuf_size; i += 8) {
memset(tmp, 0, 8);
if (i < length)
memcpy(tmp, data + i, min_t(unsigned, 8, length - i));
if (!intel_sdvo_set_value(intel_sdvo,
SDVO_CMD_SET_HBUF_DATA,
tmp, 8))
return false;
}
return intel_sdvo_set_value(intel_sdvo,
SDVO_CMD_SET_HBUF_TXRATE,
&tx_rate, 1);
}
static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo)
{
struct dip_infoframe avi_if = {
@ -901,11 +940,7 @@ static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo)
.ver = DIP_VERSION_AVI,
.len = DIP_LEN_AVI,
};
uint8_t tx_rate = SDVO_HBUF_TX_VSYNC;
uint8_t set_buf_index[2] = { 1, 0 };
uint8_t sdvo_data[4 + sizeof(avi_if.body.avi)];
uint64_t *data = (uint64_t *)sdvo_data;
unsigned i;
intel_dip_infoframe_csum(&avi_if);
@ -915,22 +950,9 @@ static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo)
sdvo_data[3] = avi_if.checksum;
memcpy(&sdvo_data[4], &avi_if.body, sizeof(avi_if.body.avi));
if (!intel_sdvo_set_value(intel_sdvo,
SDVO_CMD_SET_HBUF_INDEX,
set_buf_index, 2))
return false;
for (i = 0; i < sizeof(sdvo_data); i += 8) {
if (!intel_sdvo_set_value(intel_sdvo,
SDVO_CMD_SET_HBUF_DATA,
data, 8))
return false;
data++;
}
return intel_sdvo_set_value(intel_sdvo,
SDVO_CMD_SET_HBUF_TXRATE,
&tx_rate, 1);
return intel_sdvo_write_infoframe(intel_sdvo, SDVO_HBUF_INDEX_AVI_IF,
SDVO_HBUF_TX_VSYNC,
sdvo_data, sizeof(sdvo_data));
}
static bool intel_sdvo_set_tv_format(struct intel_sdvo *intel_sdvo)

2
drivers/gpu/drm/i915/intel_sdvo_regs.h
View File

@ -708,6 +708,8 @@ struct intel_sdvo_enhancements_arg {
#define SDVO_CMD_SET_AUDIO_STAT 0x91
#define SDVO_CMD_GET_AUDIO_STAT 0x92
#define SDVO_CMD_SET_HBUF_INDEX 0x93
#define SDVO_HBUF_INDEX_ELD 0
#define SDVO_HBUF_INDEX_AVI_IF 1
#define SDVO_CMD_GET_HBUF_INDEX 0x94
#define SDVO_CMD_GET_HBUF_INFO 0x95
#define SDVO_CMD_SET_HBUF_AV_SPLIT 0x96

9
drivers/gpu/drm/nouveau/core/core/mm.c
View File

@ -218,13 +218,16 @@ nouveau_mm_init(struct nouveau_mm *mm, u32 offset, u32 length, u32 block)
node = kzalloc(sizeof(*node), GFP_KERNEL);
if (!node)
return -ENOMEM;
node->offset = roundup(offset, mm->block_size);
node->length = rounddown(offset + length, mm->block_size) - node->offset;
if (length) {
node->offset = roundup(offset, mm->block_size);
node->length = rounddown(offset + length, mm->block_size);
node->length -= node->offset;
}
list_add_tail(&node->nl_entry, &mm->nodes);
list_add_tail(&node->fl_entry, &mm->free);
mm->heap_nodes++;
mm->heap_size += length;
return 0;
}

1
drivers/gpu/drm/nouveau/core/include/core/mm.h
View File

@ -19,7 +19,6 @@ struct nouveau_mm {
u32 block_size;
int heap_nodes;
u32 heap_size;
};
int nouveau_mm_init(struct nouveau_mm *, u32 offset, u32 length, u32 block);

10
drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c
View File

@ -219,13 +219,11 @@ nv50_fb_ctor(struct nouveau_object *parent, struct nouveau_object *engine,
((priv->base.ram.size & 0x000000ff) << 32);
tags = nv_rd32(priv, 0x100320);
if (tags) {
ret = nouveau_mm_init(&priv->base.tags, 0, tags, 1);
if (ret)
return ret;
ret = nouveau_mm_init(&priv->base.tags, 0, tags, 1);
if (ret)
return ret;
nv_debug(priv, "%d compression tags\n", tags);
}
nv_debug(priv, "%d compression tags\n", tags);
size = (priv->base.ram.size >> 12) - rsvd_head - rsvd_tail;
switch (device->chipset) {

2
drivers/gpu/drm/nouveau/core/subdev/i2c/base.c
View File

@ -292,7 +292,7 @@ nouveau_i2c_ctor(struct nouveau_object *parent, struct nouveau_object *engine,
case DCB_I2C_NVIO_BIT:
port->drive = info.drive & 0x0f;
if (device->card_type < NV_D0) {
if (info.drive >= ARRAY_SIZE(nv50_i2c_port))
if (port->drive >= ARRAY_SIZE(nv50_i2c_port))
break;
port->drive = nv50_i2c_port[port->drive];
port->sense = port->drive;

36
drivers/gpu/drm/nouveau/nouveau_display.c
View File

@ -290,6 +290,7 @@ nouveau_display_create(struct drm_device *dev)
struct nouveau_drm *drm = nouveau_drm(dev);
struct nouveau_disp *pdisp = nouveau_disp(drm->device);
struct nouveau_display *disp;
u32 pclass = dev->pdev->class >> 8;
int ret, gen;
disp = drm->display = kzalloc(sizeof(*disp), GFP_KERNEL);
@ -360,23 +361,27 @@ nouveau_display_create(struct drm_device *dev)
drm_kms_helper_poll_init(dev);
drm_kms_helper_poll_disable(dev);
if (nv_device(drm->device)->card_type < NV_50)
ret = nv04_display_create(dev);
else
if (nv_device(drm->device)->card_type < NV_D0)
ret = nv50_display_create(dev);
else
ret = nvd0_display_create(dev);
if (ret)
goto disp_create_err;
if (dev->mode_config.num_crtc) {
ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
if (nouveau_modeset == 1 ||
(nouveau_modeset < 0 && pclass == PCI_CLASS_DISPLAY_VGA)) {
if (nv_device(drm->device)->card_type < NV_50)
ret = nv04_display_create(dev);
else
if (nv_device(drm->device)->card_type < NV_D0)
ret = nv50_display_create(dev);
else
ret = nvd0_display_create(dev);
if (ret)
goto vblank_err;
goto disp_create_err;
if (dev->mode_config.num_crtc) {
ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
if (ret)
goto vblank_err;
}
nouveau_backlight_init(dev);
}
nouveau_backlight_init(dev);
return 0;
vblank_err:
@ -395,7 +400,8 @@ nouveau_display_destroy(struct drm_device *dev)
nouveau_backlight_exit(dev);
drm_vblank_cleanup(dev);
disp->dtor(dev);
if (disp->dtor)
disp->dtor(dev);
drm_kms_helper_poll_fini(dev);
drm_mode_config_cleanup(dev);

36
drivers/gpu/drm/nouveau/nouveau_drm.c
View File

@ -63,8 +63,9 @@ MODULE_PARM_DESC(noaccel, "disable kernel/abi16 acceleration");
static int nouveau_noaccel = 0;
module_param_named(noaccel, nouveau_noaccel, int, 0400);
MODULE_PARM_DESC(modeset, "enable driver");
static int nouveau_modeset = -1;
MODULE_PARM_DESC(modeset, "enable driver (default: auto, "
"0 = disabled, 1 = enabled, 2 = headless)");
int nouveau_modeset = -1;
module_param_named(modeset, nouveau_modeset, int, 0400);
static struct drm_driver driver;
@ -363,7 +364,8 @@ nouveau_drm_unload(struct drm_device *dev)
nouveau_pm_fini(dev);
nouveau_display_fini(dev);
if (dev->mode_config.num_crtc)
nouveau_display_fini(dev);
nouveau_display_destroy(dev);
nouveau_irq_fini(dev);
@ -403,13 +405,15 @@ nouveau_drm_suspend(struct pci_dev *pdev, pm_message_t pm_state)
pm_state.event == PM_EVENT_PRETHAW)
return 0;
NV_INFO(drm, "suspending fbcon...\n");
nouveau_fbcon_set_suspend(dev, 1);
if (dev->mode_config.num_crtc) {
NV_INFO(drm, "suspending fbcon...\n");
nouveau_fbcon_set_suspend(dev, 1);
NV_INFO(drm, "suspending display...\n");
ret = nouveau_display_suspend(dev);
if (ret)
return ret;
NV_INFO(drm, "suspending display...\n");
ret = nouveau_display_suspend(dev);
if (ret)
return ret;
}
NV_INFO(drm, "evicting buffers...\n");
ttm_bo_evict_mm(&drm->ttm.bdev, TTM_PL_VRAM);
@ -445,8 +449,10 @@ fail_client:
nouveau_client_init(&cli->base);
}
NV_INFO(drm, "resuming display...\n");
nouveau_display_resume(dev);
if (dev->mode_config.num_crtc) {
NV_INFO(drm, "resuming display...\n");
nouveau_display_resume(dev);
}
return ret;
}
@ -486,8 +492,10 @@ nouveau_drm_resume(struct pci_dev *pdev)
nouveau_irq_postinstall(dev);
nouveau_pm_resume(dev);
NV_INFO(drm, "resuming display...\n");
nouveau_display_resume(dev);
if (dev->mode_config.num_crtc) {
NV_INFO(drm, "resuming display...\n");
nouveau_display_resume(dev);
}
return 0;
}
@ -662,9 +670,7 @@ nouveau_drm_init(void)
#ifdef CONFIG_VGA_CONSOLE
if (vgacon_text_force())
nouveau_modeset = 0;
else
#endif
nouveau_modeset = 1;
}
if (!nouveau_modeset)

2
drivers/gpu/drm/nouveau/nouveau_drm.h
View File

@ -141,4 +141,6 @@ int nouveau_drm_resume(struct pci_dev *);
nv_info((cli), fmt, ##args); \
} while (0)
extern int nouveau_modeset;
#endif

16
drivers/gpu/drm/nouveau/nouveau_irq.c
View File

@ -61,13 +61,15 @@ nouveau_irq_handler(DRM_IRQ_ARGS)
nv_subdev(pmc)->intr(nv_subdev(pmc));
if (device->card_type >= NV_D0) {
if (nv_rd32(device, 0x000100) & 0x04000000)
nvd0_display_intr(dev);
} else
if (device->card_type >= NV_50) {
if (nv_rd32(device, 0x000100) & 0x04000000)
nv50_display_intr(dev);
if (dev->mode_config.num_crtc) {
if (device->card_type >= NV_D0) {
if (nv_rd32(device, 0x000100) & 0x04000000)
nvd0_display_intr(dev);
} else
if (device->card_type >= NV_50) {
if (nv_rd32(device, 0x000100) & 0x04000000)
nv50_display_intr(dev);
}
}
return IRQ_HANDLED;

16
drivers/gpu/drm/nouveau/nv04_dac.c
View File

@ -220,7 +220,7 @@ out:
NVWriteVgaCrtc(dev, 0, NV_CIO_CR_MODE_INDEX, saved_cr_mode);
if (blue == 0x18) {
NV_INFO(drm, "Load detected on head A\n");
NV_DEBUG(drm, "Load detected on head A\n");
return connector_status_connected;
}
@ -338,8 +338,8 @@ nv17_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector)
if (nv17_dac_sample_load(encoder) &
NV_PRAMDAC_TEST_CONTROL_SENSEB_ALLHI) {
NV_INFO(drm, "Load detected on output %c\n",
'@' + ffs(dcb->or));
NV_DEBUG(drm, "Load detected on output %c\n",
'@' + ffs(dcb->or));
return connector_status_connected;
} else {
return connector_status_disconnected;
@ -413,9 +413,9 @@ static void nv04_dac_commit(struct drm_encoder *encoder)
helper->dpms(encoder, DRM_MODE_DPMS_ON);
NV_INFO(drm, "Output %s is running on CRTC %d using output %c\n",
drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base),
nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
NV_DEBUG(drm, "Output %s is running on CRTC %d using output %c\n",
drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base),
nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
}
void nv04_dac_update_dacclk(struct drm_encoder *encoder, bool enable)
@ -461,8 +461,8 @@ static void nv04_dac_dpms(struct drm_encoder *encoder, int mode)
return;
nv_encoder->last_dpms = mode;
NV_INFO(drm, "Setting dpms mode %d on vga encoder (output %d)\n",
mode, nv_encoder->dcb->index);
NV_DEBUG(drm, "Setting dpms mode %d on vga encoder (output %d)\n",
mode, nv_encoder->dcb->index);
nv04_dac_update_dacclk(encoder, mode == DRM_MODE_DPMS_ON);
}

14
drivers/gpu/drm/nouveau/nv04_dfp.c
View File

@ -476,9 +476,9 @@ static void nv04_dfp_commit(struct drm_encoder *encoder)
helper->dpms(encoder, DRM_MODE_DPMS_ON);
NV_INFO(drm, "Output %s is running on CRTC %d using output %c\n",
drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base),
nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
NV_DEBUG(drm, "Output %s is running on CRTC %d using output %c\n",
drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base),
nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
}
static void nv04_dfp_update_backlight(struct drm_encoder *encoder, int mode)
@ -520,8 +520,8 @@ static void nv04_lvds_dpms(struct drm_encoder *encoder, int mode)
return;
nv_encoder->last_dpms = mode;
NV_INFO(drm, "Setting dpms mode %d on lvds encoder (output %d)\n",
mode, nv_encoder->dcb->index);
NV_DEBUG(drm, "Setting dpms mode %d on lvds encoder (output %d)\n",
mode, nv_encoder->dcb->index);
if (was_powersaving && is_powersaving_dpms(mode))
return;
@ -565,8 +565,8 @@ static void nv04_tmds_dpms(struct drm_encoder *encoder, int mode)
return;
nv_encoder->last_dpms = mode;
NV_INFO(drm, "Setting dpms mode %d on tmds encoder (output %d)\n",
mode, nv_encoder->dcb->index);
NV_DEBUG(drm, "Setting dpms mode %d on tmds encoder (output %d)\n",
mode, nv_encoder->dcb->index);
nv04_dfp_update_backlight(encoder, mode);
nv04_dfp_update_fp_control(encoder, mode);

9
drivers/gpu/drm/nouveau/nv04_tv.c
View File

@ -75,8 +75,8 @@ static void nv04_tv_dpms(struct drm_encoder *encoder, int mode)
struct nv04_mode_state *state = &nv04_display(dev)->mode_reg;
uint8_t crtc1A;
NV_INFO(drm, "Setting dpms mode %d on TV encoder (output %d)\n",
mode, nv_encoder->dcb->index);
NV_DEBUG(drm, "Setting dpms mode %d on TV encoder (output %d)\n",
mode, nv_encoder->dcb->index);
state->pllsel &= ~(PLLSEL_TV_CRTC1_MASK | PLLSEL_TV_CRTC2_MASK);
@ -167,9 +167,8 @@ static void nv04_tv_commit(struct drm_encoder *encoder)
helper->dpms(encoder, DRM_MODE_DPMS_ON);
NV_INFO(drm, "Output %s is running on CRTC %d using output %c\n",
drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), nv_crtc->index,
'@' + ffs(nv_encoder->dcb->or));
NV_DEBUG(drm, "Output %s is running on CRTC %d using output %c\n",
drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
}
static void nv04_tv_destroy(struct drm_encoder *encoder)

2
drivers/gpu/drm/radeon/evergreen_cs.c
View File

@ -264,7 +264,7 @@ static int evergreen_surface_check_2d(struct radeon_cs_parser *p,
/* macro tile width & height */
palign = (8 * surf->bankw * track->npipes) * surf->mtilea;
halign = (8 * surf->bankh * surf->nbanks) / surf->mtilea;
mtileb = (palign / 8) * (halign / 8) * tileb;;
mtileb = (palign / 8) * (halign / 8) * tileb;
mtile_pr = surf->nbx / palign;
mtile_ps = (mtile_pr * surf->nby) / halign;
surf->layer_size = mtile_ps * mtileb * slice_pt;

4
drivers/gpu/drm/radeon/radeon_atpx_handler.c
View File

@ -352,9 +352,9 @@ static int radeon_atpx_switchto(enum vga_switcheroo_client_id id)
}
/**
* radeon_atpx_switchto - switch to the requested GPU
* radeon_atpx_power_state - power down/up the requested GPU
*
* @id: GPU to switch to
* @id: GPU to power down/up
* @state: requested power state (0 = off, 1 = on)
*
* Execute the necessary ATPX function to power down/up the discrete GPU

28
drivers/gpu/drm/radeon/radeon_connectors.c
View File

@ -941,7 +941,7 @@ radeon_dvi_detect(struct drm_connector *connector, bool force)
struct drm_mode_object *obj;
int i;
enum drm_connector_status ret = connector_status_disconnected;
bool dret = false;
bool dret = false, broken_edid = false;
if (!force && radeon_check_hpd_status_unchanged(connector))
return connector->status;
@ -965,6 +965,9 @@ radeon_dvi_detect(struct drm_connector *connector, bool force)
ret = connector_status_disconnected;
DRM_ERROR("%s: detected RS690 floating bus bug, stopping ddc detect\n", drm_get_connector_name(connector));
radeon_connector->ddc_bus = NULL;
} else {
ret = connector_status_connected;
broken_edid = true; /* defer use_digital to later */
}
} else {
radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL);
@ -1047,13 +1050,24 @@ radeon_dvi_detect(struct drm_connector *connector, bool force)
encoder_funcs = encoder->helper_private;
if (encoder_funcs->detect) {
if (ret != connector_status_connected) {
ret = encoder_funcs->detect(encoder, connector);
if (ret == connector_status_connected) {
radeon_connector->use_digital = false;
if (!broken_edid) {
if (ret != connector_status_connected) {
/* deal with analog monitors without DDC */
ret = encoder_funcs->detect(encoder, connector);
if (ret == connector_status_connected) {
radeon_connector->use_digital = false;
}
if (ret != connector_status_disconnected)
radeon_connector->detected_by_load = true;
}
if (ret != connector_status_disconnected)
radeon_connector->detected_by_load = true;
} else {
enum drm_connector_status lret;
/* assume digital unless load detected otherwise */
radeon_connector->use_digital = true;
lret = encoder_funcs->detect(encoder, connector);
DRM_DEBUG_KMS("load_detect %x returned: %x\n",encoder->encoder_type,lret);
if (lret == connector_status_connected)
radeon_connector->use_digital = false;
}
break;
}

15
drivers/gpu/drm/radeon/radeon_legacy_crtc.c
View File

@ -295,6 +295,7 @@ static void radeon_crtc_dpms(struct drm_crtc *crtc, int mode)
struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct radeon_device *rdev = dev->dev_private;
uint32_t crtc_ext_cntl = 0;
uint32_t mask;
if (radeon_crtc->crtc_id)
@ -307,6 +308,16 @@ static void radeon_crtc_dpms(struct drm_crtc *crtc, int mode)
RADEON_CRTC_VSYNC_DIS |
RADEON_CRTC_HSYNC_DIS);
/*
* On all dual CRTC GPUs this bit controls the CRTC of the primary DAC.
* Therefore it is set in the DAC DMPS function.
* This is different for GPU's with a single CRTC but a primary and a
* TV DAC: here it controls the single CRTC no matter where it is
* routed. Therefore we set it here.
*/
if (rdev->flags & RADEON_SINGLE_CRTC)
crtc_ext_cntl = RADEON_CRTC_CRT_ON;
switch (mode) {
case DRM_MODE_DPMS_ON:
radeon_crtc->enabled = true;
@ -317,7 +328,7 @@ static void radeon_crtc_dpms(struct drm_crtc *crtc, int mode)
else {
WREG32_P(RADEON_CRTC_GEN_CNTL, RADEON_CRTC_EN, ~(RADEON_CRTC_EN |
RADEON_CRTC_DISP_REQ_EN_B));
WREG32_P(RADEON_CRTC_EXT_CNTL, 0, ~mask);
WREG32_P(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl, ~(mask | crtc_ext_cntl));
}
drm_vblank_post_modeset(dev, radeon_crtc->crtc_id);
radeon_crtc_load_lut(crtc);
@ -331,7 +342,7 @@ static void radeon_crtc_dpms(struct drm_crtc *crtc, int mode)
else {
WREG32_P(RADEON_CRTC_GEN_CNTL, RADEON_CRTC_DISP_REQ_EN_B, ~(RADEON_CRTC_EN |
RADEON_CRTC_DISP_REQ_EN_B));
WREG32_P(RADEON_CRTC_EXT_CNTL, mask, ~mask);
WREG32_P(RADEON_CRTC_EXT_CNTL, mask, ~(mask | crtc_ext_cntl));
}
radeon_crtc->enabled = false;
/* adjust pm to dpms changes AFTER disabling crtcs */

175
drivers/gpu/drm/radeon/radeon_legacy_encoders.c
View File

@ -537,7 +537,9 @@ static void radeon_legacy_primary_dac_dpms(struct drm_encoder *encoder, int mode
break;
}
WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl);
/* handled in radeon_crtc_dpms() */
if (!(rdev->flags & RADEON_SINGLE_CRTC))
WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl);
WREG32(RADEON_DAC_CNTL, dac_cntl);
WREG32(RADEON_DAC_MACRO_CNTL, dac_macro_cntl);
@ -662,6 +664,8 @@ static enum drm_connector_status radeon_legacy_primary_dac_detect(struct drm_enc
if (ASIC_IS_R300(rdev))
tmp |= (0x1b6 << RADEON_DAC_FORCE_DATA_SHIFT);
else if (ASIC_IS_RV100(rdev))
tmp |= (0x1ac << RADEON_DAC_FORCE_DATA_SHIFT);
else
tmp |= (0x180 << RADEON_DAC_FORCE_DATA_SHIFT);
@ -671,6 +675,7 @@ static enum drm_connector_status radeon_legacy_primary_dac_detect(struct drm_enc
tmp |= RADEON_DAC_RANGE_CNTL_PS2 | RADEON_DAC_CMP_EN;
WREG32(RADEON_DAC_CNTL, tmp);
tmp = dac_macro_cntl;
tmp &= ~(RADEON_DAC_PDWN_R |
RADEON_DAC_PDWN_G |
RADEON_DAC_PDWN_B);
@ -1092,7 +1097,8 @@ static void radeon_legacy_tv_dac_dpms(struct drm_encoder *encoder, int mode)
} else {
if (is_tv)
WREG32(RADEON_TV_MASTER_CNTL, tv_master_cntl);
else
/* handled in radeon_crtc_dpms() */
else if (!(rdev->flags & RADEON_SINGLE_CRTC))
WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);
WREG32(RADEON_TV_DAC_CNTL, tv_dac_cntl);
}
@ -1416,13 +1422,104 @@ static bool radeon_legacy_tv_detect(struct drm_encoder *encoder,
return found;
}
static bool radeon_legacy_ext_dac_detect(struct drm_encoder *encoder,
struct drm_connector *connector)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
uint32_t gpio_monid, fp2_gen_cntl, disp_output_cntl, crtc2_gen_cntl;
uint32_t disp_lin_trans_grph_a, disp_lin_trans_grph_b, disp_lin_trans_grph_c;
uint32_t disp_lin_trans_grph_d, disp_lin_trans_grph_e, disp_lin_trans_grph_f;
uint32_t tmp, crtc2_h_total_disp, crtc2_v_total_disp;
uint32_t crtc2_h_sync_strt_wid, crtc2_v_sync_strt_wid;
bool found = false;
int i;
/* save the regs we need */
gpio_monid = RREG32(RADEON_GPIO_MONID);
fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL);
disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL);
crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL);
disp_lin_trans_grph_a = RREG32(RADEON_DISP_LIN_TRANS_GRPH_A);
disp_lin_trans_grph_b = RREG32(RADEON_DISP_LIN_TRANS_GRPH_B);
disp_lin_trans_grph_c = RREG32(RADEON_DISP_LIN_TRANS_GRPH_C);
disp_lin_trans_grph_d = RREG32(RADEON_DISP_LIN_TRANS_GRPH_D);
disp_lin_trans_grph_e = RREG32(RADEON_DISP_LIN_TRANS_GRPH_E);
disp_lin_trans_grph_f = RREG32(RADEON_DISP_LIN_TRANS_GRPH_F);
crtc2_h_total_disp = RREG32(RADEON_CRTC2_H_TOTAL_DISP);
crtc2_v_total_disp = RREG32(RADEON_CRTC2_V_TOTAL_DISP);
crtc2_h_sync_strt_wid = RREG32(RADEON_CRTC2_H_SYNC_STRT_WID);
crtc2_v_sync_strt_wid = RREG32(RADEON_CRTC2_V_SYNC_STRT_WID);
tmp = RREG32(RADEON_GPIO_MONID);
tmp &= ~RADEON_GPIO_A_0;
WREG32(RADEON_GPIO_MONID, tmp);
WREG32(RADEON_FP2_GEN_CNTL, (RADEON_FP2_ON |
RADEON_FP2_PANEL_FORMAT |
R200_FP2_SOURCE_SEL_TRANS_UNIT |
RADEON_FP2_DVO_EN |
R200_FP2_DVO_RATE_SEL_SDR));
WREG32(RADEON_DISP_OUTPUT_CNTL, (RADEON_DISP_DAC_SOURCE_RMX |
RADEON_DISP_TRANS_MATRIX_GRAPHICS));
WREG32(RADEON_CRTC2_GEN_CNTL, (RADEON_CRTC2_EN |
RADEON_CRTC2_DISP_REQ_EN_B));
WREG32(RADEON_DISP_LIN_TRANS_GRPH_A, 0x00000000);
WREG32(RADEON_DISP_LIN_TRANS_GRPH_B, 0x000003f0);
WREG32(RADEON_DISP_LIN_TRANS_GRPH_C, 0x00000000);
WREG32(RADEON_DISP_LIN_TRANS_GRPH_D, 0x000003f0);
WREG32(RADEON_DISP_LIN_TRANS_GRPH_E, 0x00000000);
WREG32(RADEON_DISP_LIN_TRANS_GRPH_F, 0x000003f0);
WREG32(RADEON_CRTC2_H_TOTAL_DISP, 0x01000008);
WREG32(RADEON_CRTC2_H_SYNC_STRT_WID, 0x00000800);
WREG32(RADEON_CRTC2_V_TOTAL_DISP, 0x00080001);
WREG32(RADEON_CRTC2_V_SYNC_STRT_WID, 0x00000080);
for (i = 0; i < 200; i++) {
tmp = RREG32(RADEON_GPIO_MONID);
if (tmp & RADEON_GPIO_Y_0)
found = true;
if (found)
break;
if (!drm_can_sleep())
mdelay(1);
else
msleep(1);
}
/* restore the regs we used */
WREG32(RADEON_DISP_LIN_TRANS_GRPH_A, disp_lin_trans_grph_a);
WREG32(RADEON_DISP_LIN_TRANS_GRPH_B, disp_lin_trans_grph_b);
WREG32(RADEON_DISP_LIN_TRANS_GRPH_C, disp_lin_trans_grph_c);
WREG32(RADEON_DISP_LIN_TRANS_GRPH_D, disp_lin_trans_grph_d);
WREG32(RADEON_DISP_LIN_TRANS_GRPH_E, disp_lin_trans_grph_e);
WREG32(RADEON_DISP_LIN_TRANS_GRPH_F, disp_lin_trans_grph_f);
WREG32(RADEON_CRTC2_H_TOTAL_DISP, crtc2_h_total_disp);
WREG32(RADEON_CRTC2_V_TOTAL_DISP, crtc2_v_total_disp);
WREG32(RADEON_CRTC2_H_SYNC_STRT_WID, crtc2_h_sync_strt_wid);
WREG32(RADEON_CRTC2_V_SYNC_STRT_WID, crtc2_v_sync_strt_wid);
WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);
WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl);
WREG32(RADEON_FP2_GEN_CNTL, fp2_gen_cntl);
WREG32(RADEON_GPIO_MONID, gpio_monid);
return found;
}
static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder *encoder,
struct drm_connector *connector)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
uint32_t crtc2_gen_cntl, tv_dac_cntl, dac_cntl2, dac_ext_cntl;
uint32_t disp_hw_debug, disp_output_cntl, gpiopad_a, pixclks_cntl, tmp;
uint32_t crtc2_gen_cntl = 0, tv_dac_cntl, dac_cntl2, dac_ext_cntl;
uint32_t gpiopad_a = 0, pixclks_cntl, tmp;
uint32_t disp_output_cntl = 0, disp_hw_debug = 0, crtc_ext_cntl = 0;
enum drm_connector_status found = connector_status_disconnected;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_tv_dac *tv_dac = radeon_encoder->enc_priv;
@ -1459,12 +1556,27 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder
return connector_status_disconnected;
}
/* R200 uses an external DAC for secondary DAC */
if (rdev->family == CHIP_R200) {
if (radeon_legacy_ext_dac_detect(encoder, connector))
found = connector_status_connected;
return found;
}
/* save the regs we need */
pixclks_cntl = RREG32_PLL(RADEON_PIXCLKS_CNTL);
gpiopad_a = ASIC_IS_R300(rdev) ? RREG32(RADEON_GPIOPAD_A) : 0;
disp_output_cntl = ASIC_IS_R300(rdev) ? RREG32(RADEON_DISP_OUTPUT_CNTL) : 0;
disp_hw_debug = ASIC_IS_R300(rdev) ? 0 : RREG32(RADEON_DISP_HW_DEBUG);
crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL);
if (rdev->flags & RADEON_SINGLE_CRTC) {
crtc_ext_cntl = RREG32(RADEON_CRTC_EXT_CNTL);
} else {
if (ASIC_IS_R300(rdev)) {
gpiopad_a = RREG32(RADEON_GPIOPAD_A);
disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL);
} else {
disp_hw_debug = RREG32(RADEON_DISP_HW_DEBUG);
}
crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL);
}
tv_dac_cntl = RREG32(RADEON_TV_DAC_CNTL);
dac_ext_cntl = RREG32(RADEON_DAC_EXT_CNTL);
dac_cntl2 = RREG32(RADEON_DAC_CNTL2);
@ -1473,22 +1585,24 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder
| RADEON_PIX2CLK_DAC_ALWAYS_ONb);
WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp);
if (ASIC_IS_R300(rdev))
WREG32_P(RADEON_GPIOPAD_A, 1, ~1);
tmp = crtc2_gen_cntl & ~RADEON_CRTC2_PIX_WIDTH_MASK;
tmp |= RADEON_CRTC2_CRT2_ON |
(2 << RADEON_CRTC2_PIX_WIDTH_SHIFT);
WREG32(RADEON_CRTC2_GEN_CNTL, tmp);
if (ASIC_IS_R300(rdev)) {
tmp = disp_output_cntl & ~RADEON_DISP_TVDAC_SOURCE_MASK;
tmp |= RADEON_DISP_TVDAC_SOURCE_CRTC2;
WREG32(RADEON_DISP_OUTPUT_CNTL, tmp);
if (rdev->flags & RADEON_SINGLE_CRTC) {
tmp = crtc_ext_cntl | RADEON_CRTC_CRT_ON;
WREG32(RADEON_CRTC_EXT_CNTL, tmp);
} else {
tmp = disp_hw_debug & ~RADEON_CRT2_DISP1_SEL;
WREG32(RADEON_DISP_HW_DEBUG, tmp);
tmp = crtc2_gen_cntl & ~RADEON_CRTC2_PIX_WIDTH_MASK;
tmp |= RADEON_CRTC2_CRT2_ON |
(2 << RADEON_CRTC2_PIX_WIDTH_SHIFT);
WREG32(RADEON_CRTC2_GEN_CNTL, tmp);
if (ASIC_IS_R300(rdev)) {
WREG32_P(RADEON_GPIOPAD_A, 1, ~1);
tmp = disp_output_cntl & ~RADEON_DISP_TVDAC_SOURCE_MASK;
tmp |= RADEON_DISP_TVDAC_SOURCE_CRTC2;
WREG32(RADEON_DISP_OUTPUT_CNTL, tmp);
} else {
tmp = disp_hw_debug & ~RADEON_CRT2_DISP1_SEL;
WREG32(RADEON_DISP_HW_DEBUG, tmp);
}
}
tmp = RADEON_TV_DAC_NBLANK |
@ -1530,14 +1644,19 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder
WREG32(RADEON_DAC_CNTL2, dac_cntl2);
WREG32(RADEON_DAC_EXT_CNTL, dac_ext_cntl);
WREG32(RADEON_TV_DAC_CNTL, tv_dac_cntl);
WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);
if (ASIC_IS_R300(rdev)) {
WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl);
WREG32_P(RADEON_GPIOPAD_A, gpiopad_a, ~1);
if (rdev->flags & RADEON_SINGLE_CRTC) {
WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl);
} else {
WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug);
WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);
if (ASIC_IS_R300(rdev)) {
WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl);
WREG32_P(RADEON_GPIOPAD_A, gpiopad_a, ~1);
} else {
WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug);
}
}
WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl);
return found;

2
drivers/gpu/drm/udl/udl_drv.h
View File

@ -104,7 +104,7 @@ udl_fb_user_fb_create(struct drm_device *dev,
int udl_render_hline(struct drm_device *dev, int bpp, struct urb **urb_ptr,
const char *front, char **urb_buf_ptr,
u32 byte_offset, u32 byte_width,
u32 byte_offset, u32 device_byte_offset, u32 byte_width,
int *ident_ptr, int *sent_ptr);
int udl_dumb_create(struct drm_file *file_priv,

12
drivers/gpu/drm/udl/udl_fb.c
View File

@ -114,9 +114,10 @@ static void udlfb_dpy_deferred_io(struct fb_info *info,
list_for_each_entry(cur, &fbdefio->pagelist, lru) {
if (udl_render_hline(dev, (ufbdev->ufb.base.bits_per_pixel / 8),
&urb, (char *) info->fix.smem_start,
&cmd, cur->index << PAGE_SHIFT,
PAGE_SIZE, &bytes_identical, &bytes_sent))
&urb, (char *) info->fix.smem_start,
&cmd, cur->index << PAGE_SHIFT,
cur->index << PAGE_SHIFT,
PAGE_SIZE, &bytes_identical, &bytes_sent))
goto error;
bytes_rendered += PAGE_SIZE;
}
@ -187,10 +188,11 @@ int udl_handle_damage(struct udl_framebuffer *fb, int x, int y,
for (i = y; i < y + height ; i++) {
const int line_offset = fb->base.pitches[0] * i;
const int byte_offset = line_offset + (x * bpp);
const int dev_byte_offset = (fb->base.width * bpp * i) + (x * bpp);
if (udl_render_hline(dev, bpp, &urb,
(char *) fb->obj->vmapping,
&cmd, byte_offset, width * bpp,
&cmd, byte_offset, dev_byte_offset,
width * bpp,
&bytes_identical, &bytes_sent))
goto error;
}

5
drivers/gpu/drm/udl/udl_transfer.c
View File

@ -213,11 +213,12 @@ static void udl_compress_hline16(
*/
int udl_render_hline(struct drm_device *dev, int bpp, struct urb **urb_ptr,
const char *front, char **urb_buf_ptr,
u32 byte_offset, u32 byte_width,
u32 byte_offset, u32 device_byte_offset,
u32 byte_width,
int *ident_ptr, int *sent_ptr)
{
const u8 *line_start, *line_end, *next_pixel;
u32 base16 = 0 + (byte_offset / bpp) * 2;
u32 base16 = 0 + (device_byte_offset / bpp) * 2;
struct urb *urb = *urb_ptr;
u8 *cmd = *urb_buf_ptr;
u8 *cmd_end = (u8 *) urb->transfer_buffer + urb->transfer_buffer_length;

6
drivers/hid/hid-apple.c
View File

@ -522,6 +522,12 @@ static const struct hid_device_id apple_devices[] = {
.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS),
.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI),
.driver_data = APPLE_HAS_FN },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO),
.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS),
.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),

6
drivers/hid/hid-core.c
View File

@ -1532,6 +1532,9 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
@ -2139,6 +2142,9 @@ static const struct hid_device_id hid_mouse_ignore_list[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
{ }

3
drivers/hid/hid-ids.h
View File

@ -118,6 +118,9 @@
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI 0x0252
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO 0x0253
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS 0x0254
#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI 0x0259
#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO 0x025a
#define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS 0x025b
#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI 0x0249
#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO 0x024a
#define USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS 0x024b

18
drivers/hid/hid-microsoft.c
View File

@ -28,22 +28,30 @@
#define MS_RDESC 0x08
#define MS_NOGET 0x10
#define MS_DUPLICATE_USAGES 0x20
#define MS_RDESC_3K 0x40
/*
* Microsoft Wireless Desktop Receiver (Model 1028) has
* 'Usage Min/Max' where it ought to have 'Physical Min/Max'
*/
static __u8 *ms_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize)
{
unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
/*
* Microsoft Wireless Desktop Receiver (Model 1028) has
* 'Usage Min/Max' where it ought to have 'Physical Min/Max'
*/
if ((quirks & MS_RDESC) && *rsize == 571 && rdesc[557] == 0x19 &&
rdesc[559] == 0x29) {
hid_info(hdev, "fixing up Microsoft Wireless Receiver Model 1028 report descriptor\n");
rdesc[557] = 0x35;
rdesc[559] = 0x45;
}
/* the same as above (s/usage/physical/) */
if ((quirks & MS_RDESC_3K) && *rsize == 106 &&
!memcmp((char []){ 0x19, 0x00, 0x29, 0xff },
&rdesc[94], 4)) {
rdesc[94] = 0x35;
rdesc[96] = 0x45;
}
return rdesc;
}
@ -192,7 +200,7 @@ static const struct hid_device_id ms_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_USB),
.driver_data = MS_PRESENTER },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K),
.driver_data = MS_ERGONOMY },
.driver_data = MS_ERGONOMY | MS_RDESC_3K },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0),
.driver_data = MS_NOGET },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_COMFORT_MOUSE_4500),

5
drivers/hid/hid-multitouch.c
View File

@ -210,8 +210,7 @@ static struct mt_class mt_classes[] = {
},
{ .name = MT_CLS_GENERALTOUCH_PWT_TENFINGERS,
.quirks = MT_QUIRK_NOT_SEEN_MEANS_UP |
MT_QUIRK_SLOT_IS_CONTACTNUMBER,
.maxcontacts = 10
MT_QUIRK_SLOT_IS_CONTACTNUMBER
},
{ .name = MT_CLS_FLATFROG,
@ -421,11 +420,11 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
* contact max are global to the report */
td->last_field_index = field->index;
return -1;
}
case HID_DG_TOUCH:
/* Legacy devices use TIPSWITCH and not TOUCH.
* Let's just ignore this field. */
return -1;
}
/* let hid-input decide for the others */
return 0;

4
drivers/hwmon/fam15h_power.c
View File

@ -2,7 +2,7 @@
* fam15h_power.c - AMD Family 15h processor power monitoring
*
* Copyright (c) 2011 Advanced Micro Devices, Inc.
* Author: Andreas Herrmann <andreas.herrmann3@amd.com>
* Author: Andreas Herrmann <herrmann.der.user@googlemail.com>
*
*
* This driver is free software; you can redistribute it and/or
@ -28,7 +28,7 @@
#include <asm/processor.h>
MODULE_DESCRIPTION("AMD Family 15h CPU processor power monitor");
MODULE_AUTHOR("Andreas Herrmann <andreas.herrmann3@amd.com>");
MODULE_AUTHOR("Andreas Herrmann <herrmann.der.user@googlemail.com>");
MODULE_LICENSE("GPL");
/* D18F3 */

2
drivers/hwmon/gpio-fan.c
View File

@ -630,7 +630,9 @@ static struct platform_driver gpio_fan_driver = {
.driver = {
.name = "gpio-fan",
.pm = GPIO_FAN_PM,
#ifdef CONFIG_OF_GPIO
.of_match_table = of_match_ptr(of_gpio_fan_match),
#endif
},
};

1
drivers/i2c/Makefile
View File

@ -8,6 +8,7 @@ obj-$(CONFIG_I2C_SMBUS) += i2c-smbus.o
obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o
obj-$(CONFIG_I2C_MUX) += i2c-mux.o
obj-y += algos/ busses/ muxes/
obj-$(CONFIG_I2C_STUB) += i2c-stub.o
ccflags-$(CONFIG_I2C_DEBUG_CORE) := -DDEBUG
CFLAGS_i2c-core.o := -Wno-deprecated-declarations

1
drivers/i2c/busses/Kconfig
View File

@ -81,7 +81,6 @@ config I2C_I801
tristate "Intel 82801 (ICH/PCH)"
depends on PCI
select CHECK_SIGNATURE if X86 && DMI
select GPIOLIB if I2C_MUX
help
If you say yes to this option, support will be included for the Intel
801 family of mainboard I2C interfaces. Specifically, the following

1
drivers/i2c/busses/Makefile
View File

@ -85,7 +85,6 @@ obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
obj-$(CONFIG_I2C_STUB) += i2c-stub.o
obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o

11
drivers/i2c/busses/i2c-i801.c
View File

@ -82,7 +82,8 @@
#include <linux/wait.h>
#include <linux/err.h>
#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE
#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
defined CONFIG_DMI
#include <linux/gpio.h>
#include <linux/i2c-mux-gpio.h>
#include <linux/platform_device.h>
@ -192,7 +193,8 @@ struct i801_priv {
int len;
u8 *data;
#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE
#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
defined CONFIG_DMI
const struct i801_mux_config *mux_drvdata;
struct platform_device *mux_pdev;
#endif
@ -921,7 +923,8 @@ static void __init input_apanel_init(void) {}
static void __devinit i801_probe_optional_slaves(struct i801_priv *priv) {}
#endif /* CONFIG_X86 && CONFIG_DMI */
#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE
#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
defined CONFIG_DMI
static struct i801_mux_config i801_mux_config_asus_z8_d12 = {
.gpio_chip = "gpio_ich",
.values = { 0x02, 0x03 },
@ -1059,7 +1062,7 @@ static unsigned int __devinit i801_get_adapter_class(struct i801_priv *priv)
id = dmi_first_match(mux_dmi_table);
if (id) {
/* Remove from branch classes from trunk */
/* Remove branch classes from trunk */
mux_config = id->driver_data;
for (i = 0; i < mux_config->n_values; i++)
class &= ~mux_config->classes[i];

186
drivers/i2c/busses/i2c-mxs.c
View File

@ -1,7 +1,7 @@
/*
* Freescale MXS I2C bus driver
*
* Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
* Copyright (C) 2011-2012 Wolfram Sang, Pengutronix e.K.
*
* based on a (non-working) driver which was:
*
@ -35,10 +35,6 @@
#define DRIVER_NAME "mxs-i2c"
static bool use_pioqueue;
module_param(use_pioqueue, bool, 0);
MODULE_PARM_DESC(use_pioqueue, "Use PIOQUEUE mode for transfer instead of DMA");
#define MXS_I2C_CTRL0 (0x00)
#define MXS_I2C_CTRL0_SET (0x04)
@ -75,23 +71,6 @@ MODULE_PARM_DESC(use_pioqueue, "Use PIOQUEUE mode for transfer instead of DMA");
MXS_I2C_CTRL1_SLAVE_STOP_IRQ | \
MXS_I2C_CTRL1_SLAVE_IRQ)
#define MXS_I2C_QUEUECTRL (0x60)
#define MXS_I2C_QUEUECTRL_SET (0x64)
#define MXS_I2C_QUEUECTRL_CLR (0x68)
#define MXS_I2C_QUEUECTRL_QUEUE_RUN 0x20
#define MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE 0x04
#define MXS_I2C_QUEUESTAT (0x70)
#define MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY 0x00002000
#define MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK 0x0000001F
#define MXS_I2C_QUEUECMD (0x80)
#define MXS_I2C_QUEUEDATA (0x90)
#define MXS_I2C_DATA (0xa0)
#define MXS_CMD_I2C_SELECT (MXS_I2C_CTRL0_RETAIN_CLOCK | \
MXS_I2C_CTRL0_PRE_SEND_START | \
@ -153,7 +132,6 @@ struct mxs_i2c_dev {
const struct mxs_i2c_speed_config *speed;
/* DMA support components */
bool dma_mode;
int dma_channel;
struct dma_chan *dmach;
struct mxs_dma_data dma_data;
@ -172,99 +150,6 @@ static void mxs_i2c_reset(struct mxs_i2c_dev *i2c)
writel(i2c->speed->timing2, i2c->regs + MXS_I2C_TIMING2);
writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET);
if (i2c->dma_mode)
writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE,
i2c->regs + MXS_I2C_QUEUECTRL_CLR);
else
writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE,
i2c->regs + MXS_I2C_QUEUECTRL_SET);
}
static void mxs_i2c_pioq_setup_read(struct mxs_i2c_dev *i2c, u8 addr, int len,
int flags)
{
u32 data;
writel(MXS_CMD_I2C_SELECT, i2c->regs + MXS_I2C_QUEUECMD);
data = (addr << 1) | I2C_SMBUS_READ;
writel(data, i2c->regs + MXS_I2C_DATA);
data = MXS_CMD_I2C_READ | MXS_I2C_CTRL0_XFER_COUNT(len) | flags;
writel(data, i2c->regs + MXS_I2C_QUEUECMD);
}
static void mxs_i2c_pioq_setup_write(struct mxs_i2c_dev *i2c,
u8 addr, u8 *buf, int len, int flags)
{
u32 data;
int i, shifts_left;
data = MXS_CMD_I2C_WRITE | MXS_I2C_CTRL0_XFER_COUNT(len + 1) | flags;
writel(data, i2c->regs + MXS_I2C_QUEUECMD);
/*
* We have to copy the slave address (u8) and buffer (arbitrary number
* of u8) into the data register (u32). To achieve that, the u8 are put
* into the MSBs of 'data' which is then shifted for the next u8. When
* appropriate, 'data' is written to MXS_I2C_DATA. So, the first u32
* looks like this:
*
* 3 2 1 0
* 10987654|32109876|54321098|76543210
* --------+--------+--------+--------
* buffer+2|buffer+1|buffer+0|slave_addr
*/
data = ((addr << 1) | I2C_SMBUS_WRITE) << 24;
for (i = 0; i < len; i++) {
data >>= 8;
data |= buf[i] << 24;
if ((i & 3) == 2)
writel(data, i2c->regs + MXS_I2C_DATA);
}
/* Write out the remaining bytes if any */
shifts_left = 24 - (i & 3) * 8;
if (shifts_left)
writel(data >> shifts_left, i2c->regs + MXS_I2C_DATA);
}
/*
* TODO: should be replaceable with a waitqueue and RD_QUEUE_IRQ (setting the
* rd_threshold to 1). Couldn't get this to work, though.
*/
static int mxs_i2c_wait_for_data(struct mxs_i2c_dev *i2c)
{
unsigned long timeout = jiffies + msecs_to_jiffies(1000);
while (readl(i2c->regs + MXS_I2C_QUEUESTAT)
& MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY) {
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
cond_resched();
}
return 0;
}
static int mxs_i2c_finish_read(struct mxs_i2c_dev *i2c, u8 *buf, int len)
{
u32 uninitialized_var(data);
int i;
for (i = 0; i < len; i++) {
if ((i & 3) == 0) {
if (mxs_i2c_wait_for_data(i2c))
return -ETIMEDOUT;
data = readl(i2c->regs + MXS_I2C_QUEUEDATA);
}
buf[i] = data & 0xff;
data >>= 8;
}
return 0;
}
static void mxs_i2c_dma_finish(struct mxs_i2c_dev *i2c)
@ -432,39 +317,17 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
init_completion(&i2c->cmd_complete);
i2c->cmd_err = 0;
if (i2c->dma_mode) {
ret = mxs_i2c_dma_setup_xfer(adap, msg, flags);
if (ret)
return ret;
} else {
if (msg->flags & I2C_M_RD) {
mxs_i2c_pioq_setup_read(i2c, msg->addr,
msg->len, flags);
} else {
mxs_i2c_pioq_setup_write(i2c, msg->addr, msg->buf,
msg->len, flags);
}
writel(MXS_I2C_QUEUECTRL_QUEUE_RUN,
i2c->regs + MXS_I2C_QUEUECTRL_SET);
}
ret = mxs_i2c_dma_setup_xfer(adap, msg, flags);
if (ret)
return ret;
ret = wait_for_completion_timeout(&i2c->cmd_complete,
msecs_to_jiffies(1000));
if (ret == 0)
goto timeout;
if (!i2c->dma_mode && !i2c->cmd_err && (msg->flags & I2C_M_RD)) {
ret = mxs_i2c_finish_read(i2c, msg->buf, msg->len);
if (ret)
goto timeout;
}
if (i2c->cmd_err == -ENXIO)
mxs_i2c_reset(i2c);
else
writel(MXS_I2C_QUEUECTRL_QUEUE_RUN,
i2c->regs + MXS_I2C_QUEUECTRL_CLR);
dev_dbg(i2c->dev, "Done with err=%d\n", i2c->cmd_err);
@ -472,8 +335,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
timeout:
dev_dbg(i2c->dev, "Timeout!\n");
if (i2c->dma_mode)
mxs_i2c_dma_finish(i2c);
mxs_i2c_dma_finish(i2c);
mxs_i2c_reset(i2c);
return -ETIMEDOUT;
}
@ -502,7 +364,6 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id)
{
struct mxs_i2c_dev *i2c = dev_id;
u32 stat = readl(i2c->regs + MXS_I2C_CTRL1) & MXS_I2C_IRQ_MASK;
bool is_last_cmd;
if (!stat)
return IRQ_NONE;
@ -515,14 +376,6 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id)
/* MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ is only for slaves */
i2c->cmd_err = -EIO;
if (!i2c->dma_mode) {
is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) &
MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0;
if (is_last_cmd || i2c->cmd_err)
complete(&i2c->cmd_complete);
}
writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR);
return IRQ_HANDLED;
@ -555,15 +408,6 @@ static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c)
struct device_node *node = dev->of_node;
int ret;
/*
* The MXS I2C DMA mode is prefered and enabled by default.
* The PIO mode is still supported, but should be used only
* for debuging purposes etc.
*/
i2c->dma_mode = !use_pioqueue;
if (!i2c->dma_mode)
dev_info(dev, "Using PIOQUEUE mode for I2C transfers!\n");
/*
* TODO: This is a temporary solution and should be changed
* to use generic DMA binding later when the helpers get in.
@ -571,8 +415,8 @@ static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c)
ret = of_property_read_u32(node, "fsl,i2c-dma-channel",
&i2c->dma_channel);
if (ret) {
dev_warn(dev, "Failed to get DMA channel, using PIOQUEUE!\n");
i2c->dma_mode = 0;
dev_err(dev, "Failed to get DMA channel!\n");
return -ENODEV;
}
ret = of_property_read_u32(node, "clock-frequency", &speed);
@ -634,15 +478,13 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev)
}
/* Setup the DMA */
if (i2c->dma_mode) {
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
i2c->dma_data.chan_irq = dmairq;
i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c);
if (!i2c->dmach) {
dev_err(dev, "Failed to request dma\n");
return -ENODEV;
}
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
i2c->dma_data.chan_irq = dmairq;
i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c);
if (!i2c->dmach) {
dev_err(dev, "Failed to request dma\n");
return -ENODEV;
}
platform_set_drvdata(pdev, i2c);

9
drivers/i2c/busses/i2c-nomadik.c
View File

@ -644,7 +644,11 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
pm_runtime_get_sync(&dev->adev->dev);
clk_enable(dev->clk);
status = clk_prepare_enable(dev->clk);
if (status) {
dev_err(&dev->adev->dev, "can't prepare_enable clock\n");
goto out_clk;
}
status = init_hw(dev);
if (status)
@ -671,7 +675,8 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
}
out:
clk_disable(dev->clk);
clk_disable_unprepare(dev->clk);
out_clk:
pm_runtime_put_sync(&dev->adev->dev);
dev->busy = false;

2
drivers/i2c/busses/i2c-tegra.c
View File

@ -742,7 +742,7 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev)
}
ret = devm_request_irq(&pdev->dev, i2c_dev->irq,
tegra_i2c_isr, 0, pdev->name, i2c_dev);
tegra_i2c_isr, 0, dev_name(&pdev->dev), i2c_dev);
if (ret) {
dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq);
return ret;

66
drivers/i2c/busses/i2c-stub.c → drivers/i2c/i2c-stub.c
View File

@ -2,7 +2,7 @@
i2c-stub.c - I2C/SMBus chip emulator
Copyright (c) 2004 Mark M. Hoffman <mhoffman@lightlink.com>
Copyright (C) 2007 Jean Delvare <khali@linux-fr.org>
Copyright (C) 2007, 2012 Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@ -51,8 +51,8 @@ struct stub_chip {
static struct stub_chip *stub_chips;
/* Return negative errno on error. */
static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
char read_write, u8 command, int size, union i2c_smbus_data * data)
static s32 stub_xfer(struct i2c_adapter *adap, u16 addr, unsigned short flags,
char read_write, u8 command, int size, union i2c_smbus_data *data)
{
s32 ret;
int i, len;
@ -78,14 +78,14 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
case I2C_SMBUS_BYTE:
if (read_write == I2C_SMBUS_WRITE) {
chip->pointer = command;
dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, "
"wrote 0x%02x.\n",
addr, command);
dev_dbg(&adap->dev,
"smbus byte - addr 0x%02x, wrote 0x%02x.\n",
addr, command);
} else {
data->byte = chip->words[chip->pointer++] & 0xff;
dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, "
"read 0x%02x.\n",
addr, data->byte);
dev_dbg(&adap->dev,
"smbus byte - addr 0x%02x, read 0x%02x.\n",
addr, data->byte);
}
ret = 0;
@ -95,14 +95,14 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
if (read_write == I2C_SMBUS_WRITE) {
chip->words[command] &= 0xff00;
chip->words[command] |= data->byte;
dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, "
"wrote 0x%02x at 0x%02x.\n",
addr, data->byte, command);
dev_dbg(&adap->dev,
"smbus byte data - addr 0x%02x, wrote 0x%02x at 0x%02x.\n",
addr, data->byte, command);
} else {
data->byte = chip->words[command] & 0xff;
dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, "
"read 0x%02x at 0x%02x.\n",
addr, data->byte, command);
dev_dbg(&adap->dev,
"smbus byte data - addr 0x%02x, read 0x%02x at 0x%02x.\n",
addr, data->byte, command);
}
chip->pointer = command + 1;
@ -112,14 +112,14 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
case I2C_SMBUS_WORD_DATA:
if (read_write == I2C_SMBUS_WRITE) {
chip->words[command] = data->word;
dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, "
"wrote 0x%04x at 0x%02x.\n",
addr, data->word, command);
dev_dbg(&adap->dev,
"smbus word data - addr 0x%02x, wrote 0x%04x at 0x%02x.\n",
addr, data->word, command);
} else {
data->word = chip->words[command];
dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, "
"read 0x%04x at 0x%02x.\n",
addr, data->word, command);
dev_dbg(&adap->dev,
"smbus word data - addr 0x%02x, read 0x%04x at 0x%02x.\n",
addr, data->word, command);
}
ret = 0;
@ -132,17 +132,17 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
chip->words[command + i] &= 0xff00;
chip->words[command + i] |= data->block[1 + i];
}
dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, "
"wrote %d bytes at 0x%02x.\n",
addr, len, command);
dev_dbg(&adap->dev,
"i2c block data - addr 0x%02x, wrote %d bytes at 0x%02x.\n",
addr, len, command);
} else {
for (i = 0; i < len; i++) {
data->block[1 + i] =
chip->words[command + i] & 0xff;
}
dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, "
"read %d bytes at 0x%02x.\n",
addr, len, command);
dev_dbg(&adap->dev,
"i2c block data - addr 0x%02x, read %d bytes at 0x%02x.\n",
addr, len, command);
}
ret = 0;
@ -179,25 +179,24 @@ static int __init i2c_stub_init(void)
int i, ret;
if (!chip_addr[0]) {
printk(KERN_ERR "i2c-stub: Please specify a chip address\n");
pr_err("i2c-stub: Please specify a chip address\n");
return -ENODEV;
}
for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) {
if (chip_addr[i] < 0x03 || chip_addr[i] > 0x77) {
printk(KERN_ERR "i2c-stub: Invalid chip address "
"0x%02x\n", chip_addr[i]);
pr_err("i2c-stub: Invalid chip address 0x%02x\n",
chip_addr[i]);
return -EINVAL;
}
printk(KERN_INFO "i2c-stub: Virtual chip at 0x%02x\n",
chip_addr[i]);
pr_info("i2c-stub: Virtual chip at 0x%02x\n", chip_addr[i]);
}
/* Allocate memory for all chips at once */
stub_chips = kzalloc(i * sizeof(struct stub_chip), GFP_KERNEL);
if (!stub_chips) {
printk(KERN_ERR "i2c-stub: Out of memory\n");
pr_err("i2c-stub: Out of memory\n");
return -ENOMEM;
}
@ -219,4 +218,3 @@ MODULE_LICENSE("GPL");
module_init(i2c_stub_init);
module_exit(i2c_stub_exit);

6
drivers/input/gameport/emu10k1-gp.c
View File

@ -57,7 +57,7 @@ static const struct pci_device_id emu_tbl[] = {
MODULE_DEVICE_TABLE(pci, emu_tbl);
static int __devinit emu_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
static int emu_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct emu *emu;
struct gameport *port;
@ -107,7 +107,7 @@ static int __devinit emu_probe(struct pci_dev *pdev, const struct pci_device_id
return error;
}
static void __devexit emu_remove(struct pci_dev *pdev)
static void emu_remove(struct pci_dev *pdev)
{
struct emu *emu = pci_get_drvdata(pdev);
@ -122,7 +122,7 @@ static struct pci_driver emu_driver = {
.name = "Emu10k1_gameport",
.id_table = emu_tbl,
.probe = emu_probe,
.remove = __devexit_p(emu_remove),
.remove = emu_remove,
};
module_pci_driver(emu_driver);

6
drivers/input/gameport/fm801-gp.c
View File

@ -78,7 +78,7 @@ static int fm801_gp_open(struct gameport *gameport, int mode)
return 0;
}
static int __devinit fm801_gp_probe(struct pci_dev *pci, const struct pci_device_id *id)
static int fm801_gp_probe(struct pci_dev *pci, const struct pci_device_id *id)
{
struct fm801_gp *gp;
struct gameport *port;
@ -129,7 +129,7 @@ static int __devinit fm801_gp_probe(struct pci_dev *pci, const struct pci_device
return error;
}
static void __devexit fm801_gp_remove(struct pci_dev *pci)
static void fm801_gp_remove(struct pci_dev *pci)
{
struct fm801_gp *gp = pci_get_drvdata(pci);
@ -150,7 +150,7 @@ static struct pci_driver fm801_gp_driver = {
.name = "FM801_gameport",
.id_table = fm801_gp_id_table,
.probe = fm801_gp_probe,
.remove = __devexit_p(fm801_gp_remove),
.remove = fm801_gp_remove,
};
module_pci_driver(fm801_gp_driver);

2
drivers/input/input-mt.c
View File

@ -194,7 +194,7 @@ void input_mt_report_pointer_emulation(struct input_dev *dev, bool use_count)
if (!mt)
return;
oldest = 0;
oldest = NULL;
oldid = mt->trkid;
count = 0;

181
drivers/input/input.c
View File

@ -534,8 +534,11 @@ EXPORT_SYMBOL(input_grab_device);
static void __input_release_device(struct input_handle *handle)
{
struct input_dev *dev = handle->dev;
struct input_handle *grabber;
if (dev->grab == handle) {
grabber = rcu_dereference_protected(dev->grab,
lockdep_is_held(&dev->mutex));
if (grabber == handle) {
rcu_assign_pointer(dev->grab, NULL);
/* Make sure input_pass_event() notices that grab is gone */
synchronize_rcu();
@ -1723,7 +1726,7 @@ EXPORT_SYMBOL_GPL(input_class);
/**
* input_allocate_device - allocate memory for new input device
*
* Returns prepared struct input_dev or NULL.
* Returns prepared struct input_dev or %NULL.
*
* NOTE: Use input_free_device() to free devices that have not been
* registered; input_unregister_device() should be used for already
@ -1750,6 +1753,70 @@ struct input_dev *input_allocate_device(void)
}
EXPORT_SYMBOL(input_allocate_device);
struct input_devres {
struct input_dev *input;
};
static int devm_input_device_match(struct device *dev, void *res, void *data)
{
struct input_devres *devres = res;
return devres->input == data;
}
static void devm_input_device_release(struct device *dev, void *res)
{
struct input_devres *devres = res;
struct input_dev *input = devres->input;
dev_dbg(dev, "%s: dropping reference to %s\n",
__func__, dev_name(&input->dev));
input_put_device(input);
}
/**
* devm_input_allocate_device - allocate managed input device
* @dev: device owning the input device being created
*
* Returns prepared struct input_dev or %NULL.
*
* Managed input devices do not need to be explicitly unregistered or
* freed as it will be done automatically when owner device unbinds from
* its driver (or binding fails). Once managed input device is allocated,
* it is ready to be set up and registered in the same fashion as regular
* input device. There are no special devm_input_device_[un]register()
* variants, regular ones work with both managed and unmanaged devices.
*
* NOTE: the owner device is set up as parent of input device and users
* should not override it.
*/
struct input_dev *devm_input_allocate_device(struct device *dev)
{
struct input_dev *input;
struct input_devres *devres;
devres = devres_alloc(devm_input_device_release,
sizeof(struct input_devres), GFP_KERNEL);
if (!devres)
return NULL;
input = input_allocate_device();
if (!input) {
devres_free(devres);
return NULL;
}
input->dev.parent = dev;
input->devres_managed = true;
devres->input = input;
devres_add(dev, devres);
return input;
}
EXPORT_SYMBOL(devm_input_allocate_device);
/**
* input_free_device - free memory occupied by input_dev structure
* @dev: input device to free
@ -1766,8 +1833,14 @@ EXPORT_SYMBOL(input_allocate_device);
*/
void input_free_device(struct input_dev *dev)
{
if (dev)
if (dev) {
if (dev->devres_managed)
WARN_ON(devres_destroy(dev->dev.parent,
devm_input_device_release,
devm_input_device_match,
dev));
input_put_device(dev);
}
}
EXPORT_SYMBOL(input_free_device);
@ -1888,6 +1961,38 @@ static void input_cleanse_bitmasks(struct input_dev *dev)
INPUT_CLEANSE_BITMASK(dev, SW, sw);
}
static void __input_unregister_device(struct input_dev *dev)
{
struct input_handle *handle, *next;
input_disconnect_device(dev);
mutex_lock(&input_mutex);
list_for_each_entry_safe(handle, next, &dev->h_list, d_node)
handle->handler->disconnect(handle);
WARN_ON(!list_empty(&dev->h_list));
del_timer_sync(&dev->timer);
list_del_init(&dev->node);
input_wakeup_procfs_readers();
mutex_unlock(&input_mutex);
device_del(&dev->dev);
}
static void devm_input_device_unregister(struct device *dev, void *res)
{
struct input_devres *devres = res;
struct input_dev *input = devres->input;
dev_dbg(dev, "%s: unregistering device %s\n",
__func__, dev_name(&input->dev));
__input_unregister_device(input);
}
/**
* input_register_device - register device with input core
* @dev: device to be registered
@ -1903,11 +2008,21 @@ static void input_cleanse_bitmasks(struct input_dev *dev)
int input_register_device(struct input_dev *dev)
{
static atomic_t input_no = ATOMIC_INIT(0);
struct input_devres *devres = NULL;
struct input_handler *handler;
unsigned int packet_size;
const char *path;
int error;
if (dev->devres_managed) {
devres = devres_alloc(devm_input_device_unregister,
sizeof(struct input_devres), GFP_KERNEL);
if (!devres)
return -ENOMEM;
devres->input = dev;
}
/* Every input device generates EV_SYN/SYN_REPORT events. */
__set_bit(EV_SYN, dev->evbit);
@ -1923,8 +2038,10 @@ int input_register_device(struct input_dev *dev)
dev->max_vals = max(dev->hint_events_per_packet, packet_size) + 2;
dev->vals = kcalloc(dev->max_vals, sizeof(*dev->vals), GFP_KERNEL);
if (!dev->vals)
return -ENOMEM;
if (!dev->vals) {
error = -ENOMEM;
goto err_devres_free;
}
/*
* If delay and period are pre-set by the driver, then autorepeating
@ -1949,7 +2066,7 @@ int input_register_device(struct input_dev *dev)
error = device_add(&dev->dev);
if (error)
return error;
goto err_free_vals;
path = kobject_get_path(&dev->dev.kobj, GFP_KERNEL);
pr_info("%s as %s\n",
@ -1958,10 +2075,8 @@ int input_register_device(struct input_dev *dev)
kfree(path);
error = mutex_lock_interruptible(&input_mutex);
if (error) {
device_del(&dev->dev);
return error;
}
if (error)
goto err_device_del;
list_add_tail(&dev->node, &input_dev_list);
@ -1972,7 +2087,21 @@ int input_register_device(struct input_dev *dev)
mutex_unlock(&input_mutex);
if (dev->devres_managed) {
dev_dbg(dev->dev.parent, "%s: registering %s with devres.\n",
__func__, dev_name(&dev->dev));
devres_add(dev->dev.parent, devres);
}
return 0;
err_device_del:
device_del(&dev->dev);
err_free_vals:
kfree(dev->vals);
dev->vals = NULL;
err_devres_free:
devres_free(devres);
return error;
}
EXPORT_SYMBOL(input_register_device);
@ -1985,24 +2114,20 @@ EXPORT_SYMBOL(input_register_device);
*/
void input_unregister_device(struct input_dev *dev)
{
struct input_handle *handle, *next;
input_disconnect_device(dev);
mutex_lock(&input_mutex);
list_for_each_entry_safe(handle, next, &dev->h_list, d_node)
handle->handler->disconnect(handle);
WARN_ON(!list_empty(&dev->h_list));
del_timer_sync(&dev->timer);
list_del_init(&dev->node);
input_wakeup_procfs_readers();
mutex_unlock(&input_mutex);
device_unregister(&dev->dev);
if (dev->devres_managed) {
WARN_ON(devres_destroy(dev->dev.parent,
devm_input_device_unregister,
devm_input_device_match,
dev));
__input_unregister_device(dev);
/*
* We do not do input_put_device() here because it will be done
* when 2nd devres fires up.
*/
} else {
__input_unregister_device(dev);
input_put_device(dev);
}
}
EXPORT_SYMBOL(input_unregister_device);

29
drivers/input/joystick/as5011.c
View File

@ -85,7 +85,10 @@ static int as5011_i2c_write(struct i2c_client *client,
{
uint8_t data[2] = { aregaddr, avalue };
struct i2c_msg msg = {
client->addr, I2C_M_IGNORE_NAK, 2, (uint8_t *)data
.addr = client->addr,
.flags = I2C_M_IGNORE_NAK,
.len = 2,
.buf = (uint8_t *)data
};
int error;
@ -98,8 +101,18 @@ static int as5011_i2c_read(struct i2c_client *client,
{
uint8_t data[2] = { aregaddr };
struct i2c_msg msg_set[2] = {
{ client->addr, I2C_M_REV_DIR_ADDR, 1, (uint8_t *)data },
{ client->addr, I2C_M_RD | I2C_M_NOSTART, 1, (uint8_t *)data }
{
.addr = client->addr,
.flags = I2C_M_REV_DIR_ADDR,
.len = 1,
.buf = (uint8_t *)data
},
{
.addr = client->addr,
.flags = I2C_M_RD | I2C_M_NOSTART,
.len = 1,
.buf = (uint8_t *)data
}
};
int error;
@ -144,7 +157,7 @@ out:
return IRQ_HANDLED;
}
static int __devinit as5011_configure_chip(struct as5011_device *as5011,
static int as5011_configure_chip(struct as5011_device *as5011,
const struct as5011_platform_data *plat_dat)
{
struct i2c_client *client = as5011->i2c_client;
@ -212,8 +225,8 @@ static int __devinit as5011_configure_chip(struct as5011_device *as5011,
return 0;
}
static int __devinit as5011_probe(struct i2c_client *client,
const struct i2c_device_id *id)
static int as5011_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
const struct as5011_platform_data *plat_data;
struct as5011_device *as5011;
@ -328,7 +341,7 @@ err_free_mem:
return error;
}
static int __devexit as5011_remove(struct i2c_client *client)
static int as5011_remove(struct i2c_client *client)
{
struct as5011_device *as5011 = i2c_get_clientdata(client);
@ -353,7 +366,7 @@ static struct i2c_driver as5011_driver = {
.name = "as5011",
},
.probe = as5011_probe,
.remove = __devexit_p(as5011_remove),
.remove = as5011_remove,
.id_table = as5011_id,
};

6
drivers/input/joystick/maplecontrol.c
View File

@ -78,7 +78,7 @@ static void dc_pad_close(struct input_dev *dev)
}
/* allow the controller to be used */
static int __devinit probe_maple_controller(struct device *dev)
static int probe_maple_controller(struct device *dev)
{
static const short btn_bit[32] = {
BTN_C, BTN_B, BTN_A, BTN_START, -1, -1, -1, -1,
@ -157,7 +157,7 @@ fail:
return error;
}
static int __devexit remove_maple_controller(struct device *dev)
static int remove_maple_controller(struct device *dev)
{
struct maple_device *mdev = to_maple_dev(dev);
struct dc_pad *pad = maple_get_drvdata(mdev);
@ -175,7 +175,7 @@ static struct maple_driver dc_pad_driver = {
.drv = {
.name = "Dreamcast_controller",
.probe = probe_maple_controller,
.remove = __devexit_p(remove_maple_controller),
.remove = remove_maple_controller,
},
};

7
drivers/input/joystick/walkera0701.c
View File

@ -196,6 +196,7 @@ static void walkera0701_close(struct input_dev *dev)
struct walkera_dev *w = input_get_drvdata(dev);
parport_disable_irq(w->parport);
hrtimer_cancel(&w->timer);
}
static int walkera0701_connect(struct walkera_dev *w, int parport)
@ -224,6 +225,9 @@ static int walkera0701_connect(struct walkera_dev *w, int parport)
if (parport_claim(w->pardevice))
goto init_err1;
hrtimer_init(&w->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
w->timer.function = timer_handler;
w->input_dev = input_allocate_device();
if (!w->input_dev)
goto init_err2;
@ -254,8 +258,6 @@ static int walkera0701_connect(struct walkera_dev *w, int parport)
if (err)
goto init_err3;
hrtimer_init(&w->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
w->timer.function = timer_handler;
return 0;
init_err3:
@ -271,7 +273,6 @@ static int walkera0701_connect(struct walkera_dev *w, int parport)
static void walkera0701_disconnect(struct walkera_dev *w)
{
hrtimer_cancel(&w->timer);
input_unregister_device(w->input_dev);
parport_release(w->pardevice);
parport_unregister_device(w->pardevice);

Some files were not shown because too many files have changed in this diff Show More