2005-04-16 22:20:36 +00:00
|
|
|
/*
|
|
|
|
* IDE Chipset driver for the Compaq TriFlex IDE controller.
|
|
|
|
*
|
|
|
|
* Known to work with the Compaq Workstation 5x00 series.
|
|
|
|
*
|
|
|
|
* Copyright (C) 2002 Hewlett-Packard Development Group, L.P.
|
|
|
|
* Author: Torben Mathiasen <torben.mathiasen@hp.com>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
|
|
*
|
|
|
|
* Loosely based on the piix & svwks drivers.
|
|
|
|
*
|
|
|
|
* Documentation:
|
|
|
|
* Not publically available.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/ide.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
|
2008-07-24 20:53:32 +00:00
|
|
|
#define DRV_NAME "triflex"
|
|
|
|
|
ide: move ide_config_drive_speed() calls to upper layers (take 2)
* Convert {ide_hwif_t,ide_pci_device_t}->host_flag to be u16.
* Add IDE_HFLAG_POST_SET_MODE host flag to indicate the need to program
the host for the transfer mode after programming the device. Set it
in au1xxx-ide, amd74xx, cs5530, cs5535, pdc202xx_new, sc1200, pmac
and via82cxxx host drivers.
* Add IDE_HFLAG_NO_SET_MODE host flag to indicate the need to completely
skip programming of host/device for the transfer mode ("smart" hosts).
Set it in it821x host driver and check it in ide_tune_dma().
* Add ide_set_pio_mode()/ide_set_dma_mode() helpers and convert all
direct ->set_pio_mode/->speedproc users to use these helpers.
* Move ide_config_drive_speed() calls from ->set_pio_mode/->speedproc
methods to callers.
* Rename ->speedproc method to ->set_dma_mode, make it void and update
all implementations accordingly.
* Update ide_set_xfer_rate() comments.
* Unexport ide_config_drive_speed().
v2:
* Fix issues noticed by Sergei:
- export ide_set_dma_mode() instead of moving ->set_pio_mode abuse wrt
to setting DMA modes from sc1200_set_pio_mode() to do_special()
- check IDE_HFLAG_NO_SET_MODE in ide_tune_dma()
- check for (hwif->set_pio_mode) == NULL in ide_set_pio_mode()
- check for (hwif->set_dma_mode) == NULL in ide_set_dma_mode()
- return -1 from ide_set_{pio,dma}_mode() if ->set_{pio,dma}_mode == NULL
- don't set ->set_{pio,dma}_mode on it821x in "smart" mode
- fix build problem in pmac.c
- minor fixes in au1xxx-ide.c/cs5530.c/siimage.c
- improve patch description
Changes in behavior caused by this patch:
- HDIO_SET_PIO_MODE ioctl would now return -ENOSYS for attempts to change
PIO mode if it821x controller is in "smart" mode
- removal of two debugging printk-s (from cs5530.c and sc1200.c)
- transfer modes 0x00-0x07 passed from user space may be programmed twice on
the device (not really an issue since 0x00 is not supported correctly by
any host driver ATM, 0x01 is not supported at all and 0x02-0x07 are invalid)
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13 15:47:51 +00:00
|
|
|
static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
ide_hwif_t *hwif = HWIF(drive);
|
2008-02-01 22:09:31 +00:00
|
|
|
struct pci_dev *dev = to_pci_dev(hwif->dev);
|
2005-04-16 22:20:36 +00:00
|
|
|
u32 triflex_timings = 0;
|
2008-10-13 19:39:40 +00:00
|
|
|
u16 timing = 0;
|
|
|
|
u8 channel_offset = hwif->channel ? 0x74 : 0x70, unit = drive->dn & 1;
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
pci_read_config_dword(dev, channel_offset, &triflex_timings);
|
2008-10-13 19:39:40 +00:00
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
switch(speed) {
|
|
|
|
case XFER_MW_DMA_2:
|
|
|
|
timing = 0x0103;
|
|
|
|
break;
|
|
|
|
case XFER_MW_DMA_1:
|
|
|
|
timing = 0x0203;
|
|
|
|
break;
|
|
|
|
case XFER_MW_DMA_0:
|
|
|
|
timing = 0x0808;
|
|
|
|
break;
|
|
|
|
case XFER_SW_DMA_2:
|
|
|
|
case XFER_SW_DMA_1:
|
|
|
|
case XFER_SW_DMA_0:
|
|
|
|
timing = 0x0f0f;
|
|
|
|
break;
|
|
|
|
case XFER_PIO_4:
|
|
|
|
timing = 0x0202;
|
|
|
|
break;
|
|
|
|
case XFER_PIO_3:
|
|
|
|
timing = 0x0204;
|
|
|
|
break;
|
|
|
|
case XFER_PIO_2:
|
|
|
|
timing = 0x0404;
|
|
|
|
break;
|
|
|
|
case XFER_PIO_1:
|
|
|
|
timing = 0x0508;
|
|
|
|
break;
|
|
|
|
case XFER_PIO_0:
|
|
|
|
timing = 0x0808;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
triflex_timings &= ~(0xFFFF << (16 * unit));
|
|
|
|
triflex_timings |= (timing << (16 * unit));
|
|
|
|
|
|
|
|
pci_write_config_dword(dev, channel_offset, triflex_timings);
|
|
|
|
}
|
|
|
|
|
2007-10-11 21:54:00 +00:00
|
|
|
static void triflex_set_pio_mode(ide_drive_t *drive, const u8 pio)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
ide: move ide_config_drive_speed() calls to upper layers (take 2)
* Convert {ide_hwif_t,ide_pci_device_t}->host_flag to be u16.
* Add IDE_HFLAG_POST_SET_MODE host flag to indicate the need to program
the host for the transfer mode after programming the device. Set it
in au1xxx-ide, amd74xx, cs5530, cs5535, pdc202xx_new, sc1200, pmac
and via82cxxx host drivers.
* Add IDE_HFLAG_NO_SET_MODE host flag to indicate the need to completely
skip programming of host/device for the transfer mode ("smart" hosts).
Set it in it821x host driver and check it in ide_tune_dma().
* Add ide_set_pio_mode()/ide_set_dma_mode() helpers and convert all
direct ->set_pio_mode/->speedproc users to use these helpers.
* Move ide_config_drive_speed() calls from ->set_pio_mode/->speedproc
methods to callers.
* Rename ->speedproc method to ->set_dma_mode, make it void and update
all implementations accordingly.
* Update ide_set_xfer_rate() comments.
* Unexport ide_config_drive_speed().
v2:
* Fix issues noticed by Sergei:
- export ide_set_dma_mode() instead of moving ->set_pio_mode abuse wrt
to setting DMA modes from sc1200_set_pio_mode() to do_special()
- check IDE_HFLAG_NO_SET_MODE in ide_tune_dma()
- check for (hwif->set_pio_mode) == NULL in ide_set_pio_mode()
- check for (hwif->set_dma_mode) == NULL in ide_set_dma_mode()
- return -1 from ide_set_{pio,dma}_mode() if ->set_{pio,dma}_mode == NULL
- don't set ->set_{pio,dma}_mode on it821x in "smart" mode
- fix build problem in pmac.c
- minor fixes in au1xxx-ide.c/cs5530.c/siimage.c
- improve patch description
Changes in behavior caused by this patch:
- HDIO_SET_PIO_MODE ioctl would now return -ENOSYS for attempts to change
PIO mode if it821x controller is in "smart" mode
- removal of two debugging printk-s (from cs5530.c and sc1200.c)
- transfer modes 0x00-0x07 passed from user space may be programmed twice on
the device (not really an issue since 0x00 is not supported correctly by
any host driver ATM, 0x01 is not supported at all and 0x02-0x07 are invalid)
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13 15:47:51 +00:00
|
|
|
triflex_set_mode(drive, XFER_PIO_0 + pio);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2008-04-26 20:25:14 +00:00
|
|
|
static const struct ide_port_ops triflex_port_ops = {
|
|
|
|
.set_pio_mode = triflex_set_pio_mode,
|
|
|
|
.set_dma_mode = triflex_set_mode,
|
|
|
|
};
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2007-10-19 22:32:34 +00:00
|
|
|
static const struct ide_port_info triflex_device __devinitdata = {
|
2008-07-24 20:53:32 +00:00
|
|
|
.name = DRV_NAME,
|
2005-04-16 22:20:36 +00:00
|
|
|
.enablebits = {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}},
|
2008-04-26 20:25:14 +00:00
|
|
|
.port_ops = &triflex_port_ops,
|
2007-07-19 23:11:59 +00:00
|
|
|
.pio_mask = ATA_PIO4,
|
2007-10-18 22:30:07 +00:00
|
|
|
.swdma_mask = ATA_SWDMA2,
|
|
|
|
.mwdma_mask = ATA_MWDMA2,
|
2005-04-16 22:20:36 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static int __devinit triflex_init_one(struct pci_dev *dev,
|
|
|
|
const struct pci_device_id *id)
|
|
|
|
{
|
2008-07-24 20:53:14 +00:00
|
|
|
return ide_pci_init_one(dev, &triflex_device, NULL);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2007-10-16 20:29:56 +00:00
|
|
|
static const struct pci_device_id triflex_pci_tbl[] = {
|
|
|
|
{ PCI_VDEVICE(COMPAQ, PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE), 0 },
|
2005-04-16 22:20:36 +00:00
|
|
|
{ 0, },
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, triflex_pci_tbl);
|
|
|
|
|
|
|
|
static struct pci_driver driver = {
|
|
|
|
.name = "TRIFLEX_IDE",
|
|
|
|
.id_table = triflex_pci_tbl,
|
|
|
|
.probe = triflex_init_one,
|
2008-07-24 20:53:26 +00:00
|
|
|
.remove = ide_pci_remove,
|
2008-10-10 20:39:32 +00:00
|
|
|
.suspend = ide_pci_suspend,
|
|
|
|
.resume = ide_pci_resume,
|
2005-04-16 22:20:36 +00:00
|
|
|
};
|
|
|
|
|
2007-01-27 12:46:56 +00:00
|
|
|
static int __init triflex_ide_init(void)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
return ide_pci_register_driver(&driver);
|
|
|
|
}
|
|
|
|
|
2008-07-24 20:53:26 +00:00
|
|
|
static void __exit triflex_ide_exit(void)
|
|
|
|
{
|
|
|
|
pci_unregister_driver(&driver);
|
|
|
|
}
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
module_init(triflex_ide_init);
|
2008-07-24 20:53:26 +00:00
|
|
|
module_exit(triflex_ide_exit);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
MODULE_AUTHOR("Torben Mathiasen");
|
|
|
|
MODULE_DESCRIPTION("PCI driver module for Compaq Triflex IDE");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
|
|
|