dect
/
linux-2.6
Archived
13
0
Fork 0
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/drivers/acpi/events/evxfevnt.c

784 lines
20 KiB
C
Raw Normal View History

/******************************************************************************
*
* Module Name: evxfevnt - External Interfaces, ACPI event disable/enable
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2005, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <linux/module.h>
#include <acpi/acpi.h>
#include <acpi/acevents.h>
#include <acpi/acnamesp.h>
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME ("evxfevnt")
/*******************************************************************************
*
* FUNCTION: acpi_enable
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Transfers the system into ACPI mode.
*
******************************************************************************/
acpi_status
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 02:49:35 +00:00
acpi_enable (
void)
{
acpi_status status = AE_OK;
ACPI_FUNCTION_TRACE ("acpi_enable");
/* Make sure we have the FADT*/
if (!acpi_gbl_FADT) {
ACPI_DEBUG_PRINT ((ACPI_DB_WARN, "No FADT information present!\n"));
return_ACPI_STATUS (AE_NO_ACPI_TABLES);
}
if (acpi_hw_get_mode() == ACPI_SYS_MODE_ACPI) {
ACPI_DEBUG_PRINT ((ACPI_DB_INIT, "System is already in ACPI mode\n"));
}
else {
/* Transition to ACPI mode */
status = acpi_hw_set_mode (ACPI_SYS_MODE_ACPI);
if (ACPI_FAILURE (status)) {
ACPI_REPORT_ERROR (("Could not transition to ACPI mode.\n"));
return_ACPI_STATUS (status);
}
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 02:49:35 +00:00
ACPI_DEBUG_PRINT ((ACPI_DB_INIT,
"Transition to ACPI mode successful\n"));
}
return_ACPI_STATUS (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_disable
*
* PARAMETERS: None
*
* RETURN: Status
*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 02:49:35 +00:00
* DESCRIPTION: Transfers the system into LEGACY (non-ACPI) mode.
*
******************************************************************************/
acpi_status
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 02:49:35 +00:00
acpi_disable (
void)
{
acpi_status status = AE_OK;
ACPI_FUNCTION_TRACE ("acpi_disable");
if (!acpi_gbl_FADT) {
ACPI_DEBUG_PRINT ((ACPI_DB_WARN, "No FADT information present!\n"));
return_ACPI_STATUS (AE_NO_ACPI_TABLES);
}
if (acpi_hw_get_mode() == ACPI_SYS_MODE_LEGACY) {
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 02:49:35 +00:00
ACPI_DEBUG_PRINT ((ACPI_DB_INIT,
"System is already in legacy (non-ACPI) mode\n"));
}
else {
/* Transition to LEGACY mode */
status = acpi_hw_set_mode (ACPI_SYS_MODE_LEGACY);
if (ACPI_FAILURE (status)) {
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 02:49:35 +00:00
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"Could not exit ACPI mode to legacy mode"));
return_ACPI_STATUS (status);
}
ACPI_DEBUG_PRINT ((ACPI_DB_INIT, "ACPI mode disabled\n"));
}
return_ACPI_STATUS (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_enable_event
*
* PARAMETERS: Event - The fixed eventto be enabled
* Flags - Reserved
*
* RETURN: Status
*
* DESCRIPTION: Enable an ACPI event (fixed)
*
******************************************************************************/
acpi_status
acpi_enable_event (
u32 event,
u32 flags)
{
acpi_status status = AE_OK;
u32 value;
ACPI_FUNCTION_TRACE ("acpi_enable_event");
/* Decode the Fixed Event */
if (event > ACPI_EVENT_MAX) {
return_ACPI_STATUS (AE_BAD_PARAMETER);
}
/*
* Enable the requested fixed event (by writing a one to the
* enable register bit)
*/
status = acpi_set_register (acpi_gbl_fixed_event_info[event].enable_register_id,
1, ACPI_MTX_LOCK);
if (ACPI_FAILURE (status)) {
return_ACPI_STATUS (status);
}
/* Make sure that the hardware responded */
status = acpi_get_register (acpi_gbl_fixed_event_info[event].enable_register_id,
&value, ACPI_MTX_LOCK);
if (ACPI_FAILURE (status)) {
return_ACPI_STATUS (status);
}
if (value != 1) {
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"Could not enable %s event\n", acpi_ut_get_event_name (event)));
return_ACPI_STATUS (AE_NO_HARDWARE_RESPONSE);
}
return_ACPI_STATUS (status);
}
EXPORT_SYMBOL(acpi_enable_event);
/*******************************************************************************
*
* FUNCTION: acpi_set_gpe_type
*
* PARAMETERS: gpe_device - Parent GPE Device
* gpe_number - GPE level within the GPE block
* Type - New GPE type
*
* RETURN: Status
*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 02:49:35 +00:00
* DESCRIPTION: Set the type of an individual GPE
*
******************************************************************************/
acpi_status
acpi_set_gpe_type (
acpi_handle gpe_device,
u32 gpe_number,
u8 type)
{
acpi_status status = AE_OK;
struct acpi_gpe_event_info *gpe_event_info;
ACPI_FUNCTION_TRACE ("acpi_set_gpe_type");
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info (gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
if ((gpe_event_info->flags & ACPI_GPE_TYPE_MASK) == type) {
return_ACPI_STATUS (AE_OK);
}
/* Set the new type (will disable GPE if currently enabled) */
status = acpi_ev_set_gpe_type (gpe_event_info, type);
unlock_and_exit:
return_ACPI_STATUS (status);
}
EXPORT_SYMBOL(acpi_set_gpe_type);
/*******************************************************************************
*
* FUNCTION: acpi_enable_gpe
*
* PARAMETERS: gpe_device - Parent GPE Device
* gpe_number - GPE level within the GPE block
* Flags - Just enable, or also wake enable?
* Called from ISR or not
*
* RETURN: Status
*
* DESCRIPTION: Enable an ACPI event (general purpose)
*
******************************************************************************/
acpi_status
acpi_enable_gpe (
acpi_handle gpe_device,
u32 gpe_number,
u32 flags)
{
acpi_status status = AE_OK;
struct acpi_gpe_event_info *gpe_event_info;
ACPI_FUNCTION_TRACE ("acpi_enable_gpe");
/* Use semaphore lock if not executing at interrupt level */
if (flags & ACPI_NOT_ISR) {
status = acpi_ut_acquire_mutex (ACPI_MTX_EVENTS);
if (ACPI_FAILURE (status)) {
return_ACPI_STATUS (status);
}
}
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info (gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
/* Perform the enable */
status = acpi_ev_enable_gpe (gpe_event_info, TRUE);
unlock_and_exit:
if (flags & ACPI_NOT_ISR) {
(void) acpi_ut_release_mutex (ACPI_MTX_EVENTS);
}
return_ACPI_STATUS (status);
}
EXPORT_SYMBOL(acpi_enable_gpe);
/*******************************************************************************
*
* FUNCTION: acpi_disable_gpe
*
* PARAMETERS: gpe_device - Parent GPE Device
* gpe_number - GPE level within the GPE block
* Flags - Just disable, or also wake disable?
* Called from ISR or not
*
* RETURN: Status
*
* DESCRIPTION: Disable an ACPI event (general purpose)
*
******************************************************************************/
acpi_status
acpi_disable_gpe (
acpi_handle gpe_device,
u32 gpe_number,
u32 flags)
{
acpi_status status = AE_OK;
struct acpi_gpe_event_info *gpe_event_info;
ACPI_FUNCTION_TRACE ("acpi_disable_gpe");
/* Use semaphore lock if not executing at interrupt level */
if (flags & ACPI_NOT_ISR) {
status = acpi_ut_acquire_mutex (ACPI_MTX_EVENTS);
if (ACPI_FAILURE (status)) {
return_ACPI_STATUS (status);
}
}
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info (gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
status = acpi_ev_disable_gpe (gpe_event_info);
unlock_and_exit:
if (flags & ACPI_NOT_ISR) {
(void) acpi_ut_release_mutex (ACPI_MTX_EVENTS);
}
return_ACPI_STATUS (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_disable_event
*
* PARAMETERS: Event - The fixed eventto be enabled
* Flags - Reserved
*
* RETURN: Status
*
* DESCRIPTION: Disable an ACPI event (fixed)
*
******************************************************************************/
acpi_status
acpi_disable_event (
u32 event,
u32 flags)
{
acpi_status status = AE_OK;
u32 value;
ACPI_FUNCTION_TRACE ("acpi_disable_event");
/* Decode the Fixed Event */
if (event > ACPI_EVENT_MAX) {
return_ACPI_STATUS (AE_BAD_PARAMETER);
}
/*
* Disable the requested fixed event (by writing a zero to the
* enable register bit)
*/
status = acpi_set_register (acpi_gbl_fixed_event_info[event].enable_register_id,
0, ACPI_MTX_LOCK);
if (ACPI_FAILURE (status)) {
return_ACPI_STATUS (status);
}
status = acpi_get_register (acpi_gbl_fixed_event_info[event].enable_register_id,
&value, ACPI_MTX_LOCK);
if (ACPI_FAILURE (status)) {
return_ACPI_STATUS (status);
}
if (value != 0) {
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"Could not disable %s events\n", acpi_ut_get_event_name (event)));
return_ACPI_STATUS (AE_NO_HARDWARE_RESPONSE);
}
return_ACPI_STATUS (status);
}
EXPORT_SYMBOL(acpi_disable_event);
/*******************************************************************************
*
* FUNCTION: acpi_clear_event
*
* PARAMETERS: Event - The fixed event to be cleared
*
* RETURN: Status
*
* DESCRIPTION: Clear an ACPI event (fixed)
*
******************************************************************************/
acpi_status
acpi_clear_event (
u32 event)
{
acpi_status status = AE_OK;
ACPI_FUNCTION_TRACE ("acpi_clear_event");
/* Decode the Fixed Event */
if (event > ACPI_EVENT_MAX) {
return_ACPI_STATUS (AE_BAD_PARAMETER);
}
/*
* Clear the requested fixed event (By writing a one to the
* status register bit)
*/
status = acpi_set_register (acpi_gbl_fixed_event_info[event].status_register_id,
1, ACPI_MTX_LOCK);
return_ACPI_STATUS (status);
}
EXPORT_SYMBOL(acpi_clear_event);
/*******************************************************************************
*
* FUNCTION: acpi_clear_gpe
*
* PARAMETERS: gpe_device - Parent GPE Device
* gpe_number - GPE level within the GPE block
* Flags - Called from an ISR or not
*
* RETURN: Status
*
* DESCRIPTION: Clear an ACPI event (general purpose)
*
******************************************************************************/
acpi_status
acpi_clear_gpe (
acpi_handle gpe_device,
u32 gpe_number,
u32 flags)
{
acpi_status status = AE_OK;
struct acpi_gpe_event_info *gpe_event_info;
ACPI_FUNCTION_TRACE ("acpi_clear_gpe");
/* Use semaphore lock if not executing at interrupt level */
if (flags & ACPI_NOT_ISR) {
status = acpi_ut_acquire_mutex (ACPI_MTX_EVENTS);
if (ACPI_FAILURE (status)) {
return_ACPI_STATUS (status);
}
}
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info (gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
status = acpi_hw_clear_gpe (gpe_event_info);
unlock_and_exit:
if (flags & ACPI_NOT_ISR) {
(void) acpi_ut_release_mutex (ACPI_MTX_EVENTS);
}
return_ACPI_STATUS (status);
}
#ifdef ACPI_FUTURE_USAGE
/*******************************************************************************
*
* FUNCTION: acpi_get_event_status
*
* PARAMETERS: Event - The fixed event
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 02:49:35 +00:00
* event_status - Where the current status of the event will
* be returned
*
* RETURN: Status
*
* DESCRIPTION: Obtains and returns the current status of the event
*
******************************************************************************/
acpi_status
acpi_get_event_status (
u32 event,
acpi_event_status *event_status)
{
acpi_status status = AE_OK;
ACPI_FUNCTION_TRACE ("acpi_get_event_status");
if (!event_status) {
return_ACPI_STATUS (AE_BAD_PARAMETER);
}
/* Decode the Fixed Event */
if (event > ACPI_EVENT_MAX) {
return_ACPI_STATUS (AE_BAD_PARAMETER);
}
/* Get the status of the requested fixed event */
status = acpi_get_register (acpi_gbl_fixed_event_info[event].status_register_id,
event_status, ACPI_MTX_LOCK);
return_ACPI_STATUS (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_get_gpe_status
*
* PARAMETERS: gpe_device - Parent GPE Device
* gpe_number - GPE level within the GPE block
* Flags - Called from an ISR or not
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 02:49:35 +00:00
* event_status - Where the current status of the event will
* be returned
*
* RETURN: Status
*
* DESCRIPTION: Get status of an event (general purpose)
*
******************************************************************************/
acpi_status
acpi_get_gpe_status (
acpi_handle gpe_device,
u32 gpe_number,
u32 flags,
acpi_event_status *event_status)
{
acpi_status status = AE_OK;
struct acpi_gpe_event_info *gpe_event_info;
ACPI_FUNCTION_TRACE ("acpi_get_gpe_status");
/* Use semaphore lock if not executing at interrupt level */
if (flags & ACPI_NOT_ISR) {
status = acpi_ut_acquire_mutex (ACPI_MTX_EVENTS);
if (ACPI_FAILURE (status)) {
return_ACPI_STATUS (status);
}
}
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info (gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
/* Obtain status on the requested GPE number */
status = acpi_hw_get_gpe_status (gpe_event_info, event_status);
unlock_and_exit:
if (flags & ACPI_NOT_ISR) {
(void) acpi_ut_release_mutex (ACPI_MTX_EVENTS);
}
return_ACPI_STATUS (status);
}
#endif /* ACPI_FUTURE_USAGE */
/*******************************************************************************
*
* FUNCTION: acpi_install_gpe_block
*
* PARAMETERS: gpe_device - Handle to the parent GPE Block Device
* gpe_block_address - Address and space_iD
* register_count - Number of GPE register pairs in the block
2005-05-13 04:00:00 +00:00
* interrupt_number - H/W interrupt for the block
*
* RETURN: Status
*
* DESCRIPTION: Create and Install a block of GPE registers
*
******************************************************************************/
acpi_status
acpi_install_gpe_block (
acpi_handle gpe_device,
struct acpi_generic_address *gpe_block_address,
u32 register_count,
2005-05-13 04:00:00 +00:00
u32 interrupt_number)
{
acpi_status status;
union acpi_operand_object *obj_desc;
struct acpi_namespace_node *node;
struct acpi_gpe_block_info *gpe_block;
ACPI_FUNCTION_TRACE ("acpi_install_gpe_block");
if ((!gpe_device) ||
(!gpe_block_address) ||
(!register_count)) {
return_ACPI_STATUS (AE_BAD_PARAMETER);
}
status = acpi_ut_acquire_mutex (ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE (status)) {
return (status);
}
node = acpi_ns_map_handle_to_node (gpe_device);
if (!node) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
/*
* For user-installed GPE Block Devices, the gpe_block_base_number
* is always zero
*/
status = acpi_ev_create_gpe_block (node, gpe_block_address, register_count,
2005-05-13 04:00:00 +00:00
0, interrupt_number, &gpe_block);
if (ACPI_FAILURE (status)) {
goto unlock_and_exit;
}
/* Get the device_object attached to the node */
obj_desc = acpi_ns_get_attached_object (node);
if (!obj_desc) {
/* No object, create a new one */
obj_desc = acpi_ut_create_internal_object (ACPI_TYPE_DEVICE);
if (!obj_desc) {
status = AE_NO_MEMORY;
goto unlock_and_exit;
}
status = acpi_ns_attach_object (node, obj_desc, ACPI_TYPE_DEVICE);
/* Remove local reference to the object */
acpi_ut_remove_reference (obj_desc);
if (ACPI_FAILURE (status)) {
goto unlock_and_exit;
}
}
/* Install the GPE block in the device_object */
obj_desc->device.gpe_block = gpe_block;
unlock_and_exit:
(void) acpi_ut_release_mutex (ACPI_MTX_NAMESPACE);
return_ACPI_STATUS (status);
}
EXPORT_SYMBOL(acpi_install_gpe_block);
/*******************************************************************************
*
* FUNCTION: acpi_remove_gpe_block
*
* PARAMETERS: gpe_device - Handle to the parent GPE Block Device
*
* RETURN: Status
*
* DESCRIPTION: Remove a previously installed block of GPE registers
*
******************************************************************************/
acpi_status
acpi_remove_gpe_block (
acpi_handle gpe_device)
{
union acpi_operand_object *obj_desc;
acpi_status status;
struct acpi_namespace_node *node;
ACPI_FUNCTION_TRACE ("acpi_remove_gpe_block");
if (!gpe_device) {
return_ACPI_STATUS (AE_BAD_PARAMETER);
}
status = acpi_ut_acquire_mutex (ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE (status)) {
return (status);
}
node = acpi_ns_map_handle_to_node (gpe_device);
if (!node) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
/* Get the device_object attached to the node */
obj_desc = acpi_ns_get_attached_object (node);
if (!obj_desc ||
!obj_desc->device.gpe_block) {
return_ACPI_STATUS (AE_NULL_OBJECT);
}
/* Delete the GPE block (but not the device_object) */
status = acpi_ev_delete_gpe_block (obj_desc->device.gpe_block);
if (ACPI_SUCCESS (status)) {
obj_desc->device.gpe_block = NULL;
}
unlock_and_exit:
(void) acpi_ut_release_mutex (ACPI_MTX_NAMESPACE);
return_ACPI_STATUS (status);
}
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 02:49:35 +00:00
EXPORT_SYMBOL(acpi_remove_gpe_block);