dect
/
linux-2.6
Archived
13
0
Fork 0
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/arch/x86/boot/compressed/eboot.c

1253 lines
29 KiB
C
Raw Normal View History

x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
/* -----------------------------------------------------------------------
*
* Copyright 2011 Intel Corporation; author Matt Fleming
*
* This file is part of the Linux kernel, and is made available under
* the terms of the GNU General Public License version 2.
*
* ----------------------------------------------------------------------- */
#include <linux/efi.h>
#include <linux/pci.h>
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
#include <asm/efi.h>
#include <asm/setup.h>
#include <asm/desc.h>
#undef memcpy /* Use memcpy from misc.c */
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
#include "eboot.h"
static efi_system_table_t *sys_table;
static void efi_printk(char *str)
{
char *s8;
for (s8 = str; *s8; s8++) {
struct efi_simple_text_output_protocol *out;
efi_char16_t ch[2] = { 0 };
ch[0] = *s8;
out = (struct efi_simple_text_output_protocol *)sys_table->con_out;
if (*s8 == '\n') {
efi_char16_t nl[2] = { '\r', 0 };
efi_call_phys2(out->output_string, out, nl);
}
efi_call_phys2(out->output_string, out, ch);
}
}
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
static efi_status_t __get_map(efi_memory_desc_t **map, unsigned long *map_size,
unsigned long *desc_size)
{
efi_memory_desc_t *m = NULL;
efi_status_t status;
unsigned long key;
u32 desc_version;
*map_size = sizeof(*m) * 32;
again:
/*
* Add an additional efi_memory_desc_t because we're doing an
* allocation which may be in a new descriptor region.
*/
*map_size += sizeof(*m);
status = efi_call_phys3(sys_table->boottime->allocate_pool,
EFI_LOADER_DATA, *map_size, (void **)&m);
if (status != EFI_SUCCESS)
goto fail;
status = efi_call_phys5(sys_table->boottime->get_memory_map, map_size,
m, &key, desc_size, &desc_version);
if (status == EFI_BUFFER_TOO_SMALL) {
efi_call_phys1(sys_table->boottime->free_pool, m);
goto again;
}
if (status != EFI_SUCCESS)
efi_call_phys1(sys_table->boottime->free_pool, m);
fail:
*map = m;
return status;
}
/*
* Allocate at the highest possible address that is not above 'max'.
*/
static efi_status_t high_alloc(unsigned long size, unsigned long align,
unsigned long *addr, unsigned long max)
{
unsigned long map_size, desc_size;
efi_memory_desc_t *map;
efi_status_t status;
unsigned long nr_pages;
u64 max_addr = 0;
int i;
status = __get_map(&map, &map_size, &desc_size);
if (status != EFI_SUCCESS)
goto fail;
nr_pages = round_up(size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
again:
for (i = 0; i < map_size / desc_size; i++) {
efi_memory_desc_t *desc;
unsigned long m = (unsigned long)map;
u64 start, end;
desc = (efi_memory_desc_t *)(m + (i * desc_size));
if (desc->type != EFI_CONVENTIONAL_MEMORY)
continue;
if (desc->num_pages < nr_pages)
continue;
start = desc->phys_addr;
end = start + desc->num_pages * (1UL << EFI_PAGE_SHIFT);
if ((start + size) > end || (start + size) > max)
continue;
if (end - size > max)
end = max;
if (round_down(end - size, align) < start)
continue;
start = round_down(end - size, align);
/*
* Don't allocate at 0x0. It will confuse code that
* checks pointers against NULL.
*/
if (start == 0x0)
continue;
if (start > max_addr)
max_addr = start;
}
if (!max_addr)
status = EFI_NOT_FOUND;
else {
status = efi_call_phys4(sys_table->boottime->allocate_pages,
EFI_ALLOCATE_ADDRESS, EFI_LOADER_DATA,
nr_pages, &max_addr);
if (status != EFI_SUCCESS) {
max = max_addr;
max_addr = 0;
goto again;
}
*addr = max_addr;
}
free_pool:
efi_call_phys1(sys_table->boottime->free_pool, map);
fail:
return status;
}
/*
* Allocate at the lowest possible address.
*/
static efi_status_t low_alloc(unsigned long size, unsigned long align,
unsigned long *addr)
{
unsigned long map_size, desc_size;
efi_memory_desc_t *map;
efi_status_t status;
unsigned long nr_pages;
int i;
status = __get_map(&map, &map_size, &desc_size);
if (status != EFI_SUCCESS)
goto fail;
nr_pages = round_up(size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
for (i = 0; i < map_size / desc_size; i++) {
efi_memory_desc_t *desc;
unsigned long m = (unsigned long)map;
u64 start, end;
desc = (efi_memory_desc_t *)(m + (i * desc_size));
if (desc->type != EFI_CONVENTIONAL_MEMORY)
continue;
if (desc->num_pages < nr_pages)
continue;
start = desc->phys_addr;
end = start + desc->num_pages * (1UL << EFI_PAGE_SHIFT);
/*
* Don't allocate at 0x0. It will confuse code that
* checks pointers against NULL. Skip the first 8
* bytes so we start at a nice even number.
*/
if (start == 0x0)
start += 8;
start = round_up(start, align);
if ((start + size) > end)
continue;
status = efi_call_phys4(sys_table->boottime->allocate_pages,
EFI_ALLOCATE_ADDRESS, EFI_LOADER_DATA,
nr_pages, &start);
if (status == EFI_SUCCESS) {
*addr = start;
break;
}
}
if (i == map_size / desc_size)
status = EFI_NOT_FOUND;
free_pool:
efi_call_phys1(sys_table->boottime->free_pool, map);
fail:
return status;
}
static void low_free(unsigned long size, unsigned long addr)
{
unsigned long nr_pages;
nr_pages = round_up(size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
efi_call_phys2(sys_table->boottime->free_pages, addr, size);
}
static void find_bits(unsigned long mask, u8 *pos, u8 *size)
{
u8 first, len;
first = 0;
len = 0;
if (mask) {
while (!(mask & 0x1)) {
mask = mask >> 1;
first++;
}
while (mask & 0x1) {
mask = mask >> 1;
len++;
}
}
*pos = first;
*size = len;
}
static efi_status_t setup_efi_pci(struct boot_params *params)
{
efi_pci_io_protocol *pci;
efi_status_t status;
void **pci_handle;
efi_guid_t pci_proto = EFI_PCI_IO_PROTOCOL_GUID;
unsigned long nr_pci, size = 0;
int i;
struct setup_data *data;
data = (struct setup_data *)(unsigned long)params->hdr.setup_data;
while (data && data->next)
data = (struct setup_data *)(unsigned long)data->next;
status = efi_call_phys5(sys_table->boottime->locate_handle,
EFI_LOCATE_BY_PROTOCOL, &pci_proto,
NULL, &size, pci_handle);
if (status == EFI_BUFFER_TOO_SMALL) {
status = efi_call_phys3(sys_table->boottime->allocate_pool,
EFI_LOADER_DATA, size, &pci_handle);
if (status != EFI_SUCCESS)
return status;
status = efi_call_phys5(sys_table->boottime->locate_handle,
EFI_LOCATE_BY_PROTOCOL, &pci_proto,
NULL, &size, pci_handle);
}
if (status != EFI_SUCCESS)
goto free_handle;
nr_pci = size / sizeof(void *);
for (i = 0; i < nr_pci; i++) {
void *h = pci_handle[i];
uint64_t attributes;
struct pci_setup_rom *rom;
status = efi_call_phys3(sys_table->boottime->handle_protocol,
h, &pci_proto, &pci);
if (status != EFI_SUCCESS)
continue;
if (!pci)
continue;
#ifdef CONFIG_X86_64
status = efi_call_phys4(pci->attributes, pci,
EfiPciIoAttributeOperationGet, 0,
&attributes);
#else
status = efi_call_phys5(pci->attributes, pci,
EfiPciIoAttributeOperationGet, 0, 0,
&attributes);
#endif
if (status != EFI_SUCCESS)
continue;
if (!pci->romimage || !pci->romsize)
continue;
size = pci->romsize + sizeof(*rom);
status = efi_call_phys3(sys_table->boottime->allocate_pool,
EFI_LOADER_DATA, size, &rom);
if (status != EFI_SUCCESS)
continue;
rom->data.type = SETUP_PCI;
rom->data.len = size - sizeof(struct setup_data);
rom->data.next = 0;
rom->pcilen = pci->romsize;
status = efi_call_phys5(pci->pci.read, pci,
EfiPciIoWidthUint16, PCI_VENDOR_ID,
1, &(rom->vendor));
if (status != EFI_SUCCESS)
goto free_struct;
status = efi_call_phys5(pci->pci.read, pci,
EfiPciIoWidthUint16, PCI_DEVICE_ID,
1, &(rom->devid));
if (status != EFI_SUCCESS)
goto free_struct;
status = efi_call_phys5(pci->get_location, pci,
&(rom->segment), &(rom->bus),
&(rom->device), &(rom->function));
if (status != EFI_SUCCESS)
goto free_struct;
memcpy(rom->romdata, pci->romimage, pci->romsize);
if (data)
data->next = (unsigned long)rom;
else
params->hdr.setup_data = (unsigned long)rom;
data = (struct setup_data *)rom;
continue;
free_struct:
efi_call_phys1(sys_table->boottime->free_pool, rom);
}
free_handle:
efi_call_phys1(sys_table->boottime->free_pool, pci_handle);
return status;
}
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
/*
* See if we have Graphics Output Protocol
*/
static efi_status_t setup_gop(struct screen_info *si, efi_guid_t *proto,
unsigned long size)
{
struct efi_graphics_output_protocol *gop, *first_gop;
struct efi_pixel_bitmask pixel_info;
unsigned long nr_gops;
efi_status_t status;
void **gop_handle;
u16 width, height;
u32 fb_base, fb_size;
u32 pixels_per_scan_line;
int pixel_format;
int i;
status = efi_call_phys3(sys_table->boottime->allocate_pool,
EFI_LOADER_DATA, size, &gop_handle);
if (status != EFI_SUCCESS)
return status;
status = efi_call_phys5(sys_table->boottime->locate_handle,
EFI_LOCATE_BY_PROTOCOL, proto,
NULL, &size, gop_handle);
if (status != EFI_SUCCESS)
goto free_handle;
first_gop = NULL;
nr_gops = size / sizeof(void *);
for (i = 0; i < nr_gops; i++) {
struct efi_graphics_output_mode_info *info;
efi_guid_t conout_proto = EFI_CONSOLE_OUT_DEVICE_GUID;
bool conout_found = false;
void *dummy;
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
void *h = gop_handle[i];
status = efi_call_phys3(sys_table->boottime->handle_protocol,
h, proto, &gop);
if (status != EFI_SUCCESS)
continue;
status = efi_call_phys3(sys_table->boottime->handle_protocol,
h, &conout_proto, &dummy);
if (status == EFI_SUCCESS)
conout_found = true;
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
status = efi_call_phys4(gop->query_mode, gop,
gop->mode->mode, &size, &info);
if (status == EFI_SUCCESS && (!first_gop || conout_found)) {
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
/*
* Systems that use the UEFI Console Splitter may
* provide multiple GOP devices, not all of which are
* backed by real hardware. The workaround is to search
* for a GOP implementing the ConOut protocol, and if
* one isn't found, to just fall back to the first GOP.
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
*/
width = info->horizontal_resolution;
height = info->vertical_resolution;
fb_base = gop->mode->frame_buffer_base;
fb_size = gop->mode->frame_buffer_size;
pixel_format = info->pixel_format;
pixel_info = info->pixel_information;
pixels_per_scan_line = info->pixels_per_scan_line;
/*
* Once we've found a GOP supporting ConOut,
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
* don't bother looking any further.
*/
first_gop = gop;
if (conout_found)
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
break;
}
}
/* Did we find any GOPs? */
if (!first_gop)
goto free_handle;
/* EFI framebuffer */
si->orig_video_isVGA = VIDEO_TYPE_EFI;
si->lfb_width = width;
si->lfb_height = height;
si->lfb_base = fb_base;
si->pages = 1;
if (pixel_format == PIXEL_RGB_RESERVED_8BIT_PER_COLOR) {
si->lfb_depth = 32;
si->lfb_linelength = pixels_per_scan_line * 4;
si->red_size = 8;
si->red_pos = 0;
si->green_size = 8;
si->green_pos = 8;
si->blue_size = 8;
si->blue_pos = 16;
si->rsvd_size = 8;
si->rsvd_pos = 24;
} else if (pixel_format == PIXEL_BGR_RESERVED_8BIT_PER_COLOR) {
si->lfb_depth = 32;
si->lfb_linelength = pixels_per_scan_line * 4;
si->red_size = 8;
si->red_pos = 16;
si->green_size = 8;
si->green_pos = 8;
si->blue_size = 8;
si->blue_pos = 0;
si->rsvd_size = 8;
si->rsvd_pos = 24;
} else if (pixel_format == PIXEL_BIT_MASK) {
find_bits(pixel_info.red_mask, &si->red_pos, &si->red_size);
find_bits(pixel_info.green_mask, &si->green_pos,
&si->green_size);
find_bits(pixel_info.blue_mask, &si->blue_pos, &si->blue_size);
find_bits(pixel_info.reserved_mask, &si->rsvd_pos,
&si->rsvd_size);
si->lfb_depth = si->red_size + si->green_size +
si->blue_size + si->rsvd_size;
si->lfb_linelength = (pixels_per_scan_line * si->lfb_depth) / 8;
} else {
si->lfb_depth = 4;
si->lfb_linelength = si->lfb_width / 2;
si->red_size = 0;
si->red_pos = 0;
si->green_size = 0;
si->green_pos = 0;
si->blue_size = 0;
si->blue_pos = 0;
si->rsvd_size = 0;
si->rsvd_pos = 0;
}
si->lfb_size = si->lfb_linelength * si->lfb_height;
si->capabilities |= VIDEO_CAPABILITY_SKIP_QUIRKS;
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
free_handle:
efi_call_phys1(sys_table->boottime->free_pool, gop_handle);
return status;
}
/*
* See if we have Universal Graphics Adapter (UGA) protocol
*/
static efi_status_t setup_uga(struct screen_info *si, efi_guid_t *uga_proto,
unsigned long size)
{
struct efi_uga_draw_protocol *uga, *first_uga;
unsigned long nr_ugas;
efi_status_t status;
u32 width, height;
void **uga_handle = NULL;
int i;
status = efi_call_phys3(sys_table->boottime->allocate_pool,
EFI_LOADER_DATA, size, &uga_handle);
if (status != EFI_SUCCESS)
return status;
status = efi_call_phys5(sys_table->boottime->locate_handle,
EFI_LOCATE_BY_PROTOCOL, uga_proto,
NULL, &size, uga_handle);
if (status != EFI_SUCCESS)
goto free_handle;
first_uga = NULL;
nr_ugas = size / sizeof(void *);
for (i = 0; i < nr_ugas; i++) {
efi_guid_t pciio_proto = EFI_PCI_IO_PROTOCOL_GUID;
void *handle = uga_handle[i];
u32 w, h, depth, refresh;
void *pciio;
status = efi_call_phys3(sys_table->boottime->handle_protocol,
handle, uga_proto, &uga);
if (status != EFI_SUCCESS)
continue;
efi_call_phys3(sys_table->boottime->handle_protocol,
handle, &pciio_proto, &pciio);
status = efi_call_phys5(uga->get_mode, uga, &w, &h,
&depth, &refresh);
if (status == EFI_SUCCESS && (!first_uga || pciio)) {
width = w;
height = h;
/*
* Once we've found a UGA supporting PCIIO,
* don't bother looking any further.
*/
if (pciio)
break;
first_uga = uga;
}
}
if (!first_uga)
goto free_handle;
/* EFI framebuffer */
si->orig_video_isVGA = VIDEO_TYPE_EFI;
si->lfb_depth = 32;
si->lfb_width = width;
si->lfb_height = height;
si->red_size = 8;
si->red_pos = 16;
si->green_size = 8;
si->green_pos = 8;
si->blue_size = 8;
si->blue_pos = 0;
si->rsvd_size = 8;
si->rsvd_pos = 24;
free_handle:
efi_call_phys1(sys_table->boottime->free_pool, uga_handle);
return status;
}
void setup_graphics(struct boot_params *boot_params)
{
efi_guid_t graphics_proto = EFI_GRAPHICS_OUTPUT_PROTOCOL_GUID;
struct screen_info *si;
efi_guid_t uga_proto = EFI_UGA_PROTOCOL_GUID;
efi_status_t status;
unsigned long size;
void **gop_handle = NULL;
void **uga_handle = NULL;
si = &boot_params->screen_info;
memset(si, 0, sizeof(*si));
size = 0;
status = efi_call_phys5(sys_table->boottime->locate_handle,
EFI_LOCATE_BY_PROTOCOL, &graphics_proto,
NULL, &size, gop_handle);
if (status == EFI_BUFFER_TOO_SMALL)
status = setup_gop(si, &graphics_proto, size);
if (status != EFI_SUCCESS) {
size = 0;
status = efi_call_phys5(sys_table->boottime->locate_handle,
EFI_LOCATE_BY_PROTOCOL, &uga_proto,
NULL, &size, uga_handle);
if (status == EFI_BUFFER_TOO_SMALL)
setup_uga(si, &uga_proto, size);
}
}
struct initrd {
efi_file_handle_t *handle;
u64 size;
};
/*
* Check the cmdline for a LILO-style initrd= arguments.
*
* We only support loading an initrd from the same filesystem as the
* kernel image.
*/
static efi_status_t handle_ramdisks(efi_loaded_image_t *image,
struct setup_header *hdr)
{
struct initrd *initrds;
unsigned long initrd_addr;
efi_guid_t fs_proto = EFI_FILE_SYSTEM_GUID;
u64 initrd_total;
efi_file_io_interface_t *io;
efi_file_handle_t *fh;
efi_status_t status;
int nr_initrds;
char *str;
int i, j, k;
initrd_addr = 0;
initrd_total = 0;
str = (char *)(unsigned long)hdr->cmd_line_ptr;
j = 0; /* See close_handles */
if (!str || !*str)
return EFI_SUCCESS;
for (nr_initrds = 0; *str; nr_initrds++) {
str = strstr(str, "initrd=");
if (!str)
break;
str += 7;
/* Skip any leading slashes */
while (*str == '/' || *str == '\\')
str++;
while (*str && *str != ' ' && *str != '\n')
str++;
}
if (!nr_initrds)
return EFI_SUCCESS;
status = efi_call_phys3(sys_table->boottime->allocate_pool,
EFI_LOADER_DATA,
nr_initrds * sizeof(*initrds),
&initrds);
if (status != EFI_SUCCESS) {
efi_printk("Failed to alloc mem for initrds\n");
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
goto fail;
}
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
str = (char *)(unsigned long)hdr->cmd_line_ptr;
for (i = 0; i < nr_initrds; i++) {
struct initrd *initrd;
efi_file_handle_t *h;
efi_file_info_t *info;
efi_char16_t filename_16[256];
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
unsigned long info_sz;
efi_guid_t info_guid = EFI_FILE_INFO_ID;
efi_char16_t *p;
u64 file_sz;
str = strstr(str, "initrd=");
if (!str)
break;
str += 7;
initrd = &initrds[i];
p = filename_16;
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
/* Skip any leading slashes */
while (*str == '/' || *str == '\\')
str++;
while (*str && *str != ' ' && *str != '\n') {
if ((u8 *)p >= (u8 *)filename_16 + sizeof(filename_16))
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
break;
*p++ = *str++;
}
*p = '\0';
/* Only open the volume once. */
if (!i) {
efi_boot_services_t *boottime;
boottime = sys_table->boottime;
status = efi_call_phys3(boottime->handle_protocol,
image->device_handle, &fs_proto, &io);
if (status != EFI_SUCCESS) {
efi_printk("Failed to handle fs_proto\n");
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
goto free_initrds;
}
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
status = efi_call_phys2(io->open_volume, io, &fh);
if (status != EFI_SUCCESS) {
efi_printk("Failed to open volume\n");
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
goto free_initrds;
}
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
}
status = efi_call_phys5(fh->open, fh, &h, filename_16,
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
EFI_FILE_MODE_READ, (u64)0);
if (status != EFI_SUCCESS) {
efi_printk("Failed to open initrd file\n");
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
goto close_handles;
}
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
initrd->handle = h;
info_sz = 0;
status = efi_call_phys4(h->get_info, h, &info_guid,
&info_sz, NULL);
if (status != EFI_BUFFER_TOO_SMALL) {
efi_printk("Failed to get initrd info size\n");
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
goto close_handles;
}
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
grow:
status = efi_call_phys3(sys_table->boottime->allocate_pool,
EFI_LOADER_DATA, info_sz, &info);
if (status != EFI_SUCCESS) {
efi_printk("Failed to alloc mem for initrd info\n");
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
goto close_handles;
}
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
status = efi_call_phys4(h->get_info, h, &info_guid,
&info_sz, info);
if (status == EFI_BUFFER_TOO_SMALL) {
efi_call_phys1(sys_table->boottime->free_pool, info);
goto grow;
}
file_sz = info->file_size;
efi_call_phys1(sys_table->boottime->free_pool, info);
if (status != EFI_SUCCESS) {
efi_printk("Failed to get initrd info\n");
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
goto close_handles;
}
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
initrd->size = file_sz;
initrd_total += file_sz;
}
if (initrd_total) {
unsigned long addr;
/*
* Multiple initrd's need to be at consecutive
* addresses in memory, so allocate enough memory for
* all the initrd's.
*/
status = high_alloc(initrd_total, 0x1000,
&initrd_addr, hdr->initrd_addr_max);
if (status != EFI_SUCCESS) {
efi_printk("Failed to alloc highmem for initrds\n");
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
goto close_handles;
}
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
/* We've run out of free low memory. */
if (initrd_addr > hdr->initrd_addr_max) {
efi_printk("We've run out of free low memory\n");
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
status = EFI_INVALID_PARAMETER;
goto free_initrd_total;
}
addr = initrd_addr;
for (j = 0; j < nr_initrds; j++) {
u64 size;
size = initrds[j].size;
while (size) {
u64 chunksize;
if (size > EFI_READ_CHUNK_SIZE)
chunksize = EFI_READ_CHUNK_SIZE;
else
chunksize = size;
status = efi_call_phys3(fh->read,
initrds[j].handle,
&chunksize, addr);
if (status != EFI_SUCCESS) {
efi_printk("Failed to read initrd\n");
goto free_initrd_total;
}
addr += chunksize;
size -= chunksize;
}
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
efi_call_phys1(fh->close, initrds[j].handle);
}
}
efi_call_phys1(sys_table->boottime->free_pool, initrds);
hdr->ramdisk_image = initrd_addr;
hdr->ramdisk_size = initrd_total;
return status;
free_initrd_total:
low_free(initrd_total, initrd_addr);
close_handles:
for (k = j; k < i; k++)
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
efi_call_phys1(fh->close, initrds[k].handle);
free_initrds:
efi_call_phys1(sys_table->boottime->free_pool, initrds);
fail:
hdr->ramdisk_image = 0;
hdr->ramdisk_size = 0;
return status;
}
/*
* Because the x86 boot code expects to be passed a boot_params we
* need to create one ourselves (usually the bootloader would create
* one for us).
*/
struct boot_params *make_boot_params(void *handle, efi_system_table_t *_table)
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
{
struct boot_params *boot_params;
struct sys_desc_table *sdt;
struct apm_bios_info *bi;
struct setup_header *hdr;
struct efi_info *efi;
efi_loaded_image_t *image;
void *options;
u32 load_options_size;
efi_guid_t proto = LOADED_IMAGE_PROTOCOL_GUID;
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
int options_size = 0;
efi_status_t status;
unsigned long cmdline;
u16 *s2;
u8 *s1;
int i;
sys_table = _table;
/* Check if we were booted by the EFI firmware */
if (sys_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE)
return NULL;
status = efi_call_phys3(sys_table->boottime->handle_protocol,
handle, &proto, (void *)&image);
if (status != EFI_SUCCESS) {
efi_printk("Failed to get handle for LOADED_IMAGE_PROTOCOL\n");
return NULL;
}
status = low_alloc(0x4000, 1, (unsigned long *)&boot_params);
if (status != EFI_SUCCESS) {
efi_printk("Failed to alloc lowmem for boot params\n");
return NULL;
}
memset(boot_params, 0x0, 0x4000);
hdr = &boot_params->hdr;
efi = &boot_params->efi_info;
bi = &boot_params->apm_bios_info;
sdt = &boot_params->sys_desc_table;
/* Copy the second sector to boot_params */
memcpy(&hdr->jump, image->image_base + 512, 512);
/*
* Fill out some of the header fields ourselves because the
* EFI firmware loader doesn't load the first sector.
*/
hdr->root_flags = 1;
hdr->vid_mode = 0xffff;
hdr->boot_flag = 0xAA55;
hdr->code32_start = (__u64)(unsigned long)image->image_base;
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
hdr->type_of_loader = 0x21;
/* Convert unicode cmdline to ascii */
options = image->load_options;
load_options_size = image->load_options_size / 2; /* ASCII */
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
cmdline = 0;
s2 = (u16 *)options;
if (s2) {
while (*s2 && *s2 != '\n' && options_size < load_options_size) {
s2++;
options_size++;
}
if (options_size) {
if (options_size > hdr->cmdline_size)
options_size = hdr->cmdline_size;
options_size++; /* NUL termination */
status = low_alloc(options_size, 1, &cmdline);
if (status != EFI_SUCCESS) {
efi_printk("Failed to alloc mem for cmdline\n");
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
goto fail;
}
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
s1 = (u8 *)(unsigned long)cmdline;
s2 = (u16 *)options;
for (i = 0; i < options_size - 1; i++)
*s1++ = *s2++;
*s1 = '\0';
}
}
hdr->cmd_line_ptr = cmdline;
hdr->ramdisk_image = 0;
hdr->ramdisk_size = 0;
/* Clear APM BIOS info */
memset(bi, 0, sizeof(*bi));
memset(sdt, 0, sizeof(*sdt));
status = handle_ramdisks(image, hdr);
if (status != EFI_SUCCESS)
goto fail2;
return boot_params;
fail2:
if (options_size)
low_free(options_size, hdr->cmd_line_ptr);
fail:
low_free(0x4000, (unsigned long)boot_params);
return NULL;
}
static efi_status_t exit_boot(struct boot_params *boot_params,
void *handle)
{
struct efi_info *efi = &boot_params->efi_info;
struct e820entry *e820_map = &boot_params->e820_map[0];
struct e820entry *prev = NULL;
unsigned long size, key, desc_size, _size;
efi_memory_desc_t *mem_map;
efi_status_t status;
__u32 desc_version;
u8 nr_entries;
int i;
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
size = sizeof(*mem_map) * 32;
again:
size += sizeof(*mem_map);
_size = size;
status = low_alloc(size, 1, (unsigned long *)&mem_map);
if (status != EFI_SUCCESS)
return status;
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
status = efi_call_phys5(sys_table->boottime->get_memory_map, &size,
mem_map, &key, &desc_size, &desc_version);
if (status == EFI_BUFFER_TOO_SMALL) {
low_free(_size, (unsigned long)mem_map);
goto again;
}
if (status != EFI_SUCCESS)
goto free_mem_map;
memcpy(&efi->efi_loader_signature, EFI_LOADER_SIGNATURE, sizeof(__u32));
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
efi->efi_systab = (unsigned long)sys_table;
efi->efi_memdesc_size = desc_size;
efi->efi_memdesc_version = desc_version;
efi->efi_memmap = (unsigned long)mem_map;
efi->efi_memmap_size = size;
#ifdef CONFIG_X86_64
efi->efi_systab_hi = (unsigned long)sys_table >> 32;
efi->efi_memmap_hi = (unsigned long)mem_map >> 32;
#endif
/* Might as well exit boot services now */
status = efi_call_phys2(sys_table->boottime->exit_boot_services,
handle, key);
if (status != EFI_SUCCESS)
goto free_mem_map;
/* Historic? */
boot_params->alt_mem_k = 32 * 1024;
/*
* Convert the EFI memory map to E820.
*/
nr_entries = 0;
for (i = 0; i < size / desc_size; i++) {
efi_memory_desc_t *d;
unsigned int e820_type = 0;
unsigned long m = (unsigned long)mem_map;
d = (efi_memory_desc_t *)(m + (i * desc_size));
switch (d->type) {
case EFI_RESERVED_TYPE:
case EFI_RUNTIME_SERVICES_CODE:
case EFI_RUNTIME_SERVICES_DATA:
case EFI_MEMORY_MAPPED_IO:
case EFI_MEMORY_MAPPED_IO_PORT_SPACE:
case EFI_PAL_CODE:
e820_type = E820_RESERVED;
break;
case EFI_UNUSABLE_MEMORY:
e820_type = E820_UNUSABLE;
break;
case EFI_ACPI_RECLAIM_MEMORY:
e820_type = E820_ACPI;
break;
case EFI_LOADER_CODE:
case EFI_LOADER_DATA:
case EFI_BOOT_SERVICES_CODE:
case EFI_BOOT_SERVICES_DATA:
case EFI_CONVENTIONAL_MEMORY:
e820_type = E820_RAM;
break;
case EFI_ACPI_MEMORY_NVS:
e820_type = E820_NVS;
break;
default:
continue;
}
/* Merge adjacent mappings */
if (prev && prev->type == e820_type &&
(prev->addr + prev->size) == d->phys_addr)
prev->size += d->num_pages << 12;
else {
e820_map->addr = d->phys_addr;
e820_map->size = d->num_pages << 12;
e820_map->type = e820_type;
prev = e820_map++;
nr_entries++;
}
}
boot_params->e820_entries = nr_entries;
return EFI_SUCCESS;
free_mem_map:
low_free(_size, (unsigned long)mem_map);
return status;
}
static efi_status_t relocate_kernel(struct setup_header *hdr)
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
{
unsigned long start, nr_pages;
efi_status_t status;
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
/*
* The EFI firmware loader could have placed the kernel image
* anywhere in memory, but the kernel has various restrictions
* on the max physical address it can run at. Attempt to move
* the kernel to boot_params.pref_address, or as low as
* possible.
*/
start = hdr->pref_address;
nr_pages = round_up(hdr->init_size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
status = efi_call_phys4(sys_table->boottime->allocate_pages,
EFI_ALLOCATE_ADDRESS, EFI_LOADER_DATA,
nr_pages, &start);
if (status != EFI_SUCCESS) {
status = low_alloc(hdr->init_size, hdr->kernel_alignment,
&start);
if (status != EFI_SUCCESS)
efi_printk("Failed to alloc mem for kernel\n");
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
}
if (status == EFI_SUCCESS)
memcpy((void *)start, (void *)(unsigned long)hdr->code32_start,
hdr->init_size);
hdr->pref_address = hdr->code32_start;
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
hdr->code32_start = (__u32)start;
return status;
}
/*
* On success we return a pointer to a boot_params structure, and NULL
* on failure.
*/
struct boot_params *efi_main(void *handle, efi_system_table_t *_table,
struct boot_params *boot_params)
{
struct desc_ptr *gdt, *idt;
efi_loaded_image_t *image;
struct setup_header *hdr = &boot_params->hdr;
efi_status_t status;
struct desc_struct *desc;
sys_table = _table;
/* Check if we were booted by the EFI firmware */
if (sys_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE)
goto fail;
setup_graphics(boot_params);
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
setup_efi_pci(boot_params);
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
status = efi_call_phys3(sys_table->boottime->allocate_pool,
EFI_LOADER_DATA, sizeof(*gdt),
(void **)&gdt);
if (status != EFI_SUCCESS) {
efi_printk("Failed to alloc mem for gdt structure\n");
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
goto fail;
}
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
gdt->size = 0x800;
status = low_alloc(gdt->size, 8, (unsigned long *)&gdt->address);
if (status != EFI_SUCCESS) {
efi_printk("Failed to alloc mem for gdt\n");
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
goto fail;
}
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
status = efi_call_phys3(sys_table->boottime->allocate_pool,
EFI_LOADER_DATA, sizeof(*idt),
(void **)&idt);
if (status != EFI_SUCCESS) {
efi_printk("Failed to alloc mem for idt structure\n");
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
goto fail;
}
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
idt->size = 0;
idt->address = 0;
/*
* If the kernel isn't already loaded at the preferred load
* address, relocate it.
*/
if (hdr->pref_address != hdr->code32_start) {
status = relocate_kernel(hdr);
if (status != EFI_SUCCESS)
goto fail;
}
status = exit_boot(boot_params, handle);
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
if (status != EFI_SUCCESS)
goto fail;
memset((char *)gdt->address, 0x0, gdt->size);
desc = (struct desc_struct *)gdt->address;
/* The first GDT is a dummy and the second is unused. */
desc += 2;
desc->limit0 = 0xffff;
desc->base0 = 0x0000;
desc->base1 = 0x0000;
desc->type = SEG_TYPE_CODE | SEG_TYPE_EXEC_READ;
desc->s = DESC_TYPE_CODE_DATA;
desc->dpl = 0;
desc->p = 1;
desc->limit = 0xf;
desc->avl = 0;
desc->l = 0;
desc->d = SEG_OP_SIZE_32BIT;
desc->g = SEG_GRANULARITY_4KB;
desc->base2 = 0x00;
desc++;
desc->limit0 = 0xffff;
desc->base0 = 0x0000;
desc->base1 = 0x0000;
desc->type = SEG_TYPE_DATA | SEG_TYPE_READ_WRITE;
desc->s = DESC_TYPE_CODE_DATA;
desc->dpl = 0;
desc->p = 1;
desc->limit = 0xf;
desc->avl = 0;
desc->l = 0;
desc->d = SEG_OP_SIZE_32BIT;
desc->g = SEG_GRANULARITY_4KB;
desc->base2 = 0x00;
#ifdef CONFIG_X86_64
/* Task segment value */
desc++;
desc->limit0 = 0x0000;
desc->base0 = 0x0000;
desc->base1 = 0x0000;
desc->type = SEG_TYPE_TSS;
desc->s = 0;
desc->dpl = 0;
desc->p = 1;
desc->limit = 0x0;
desc->avl = 0;
desc->l = 0;
desc->d = 0;
desc->g = SEG_GRANULARITY_4KB;
desc->base2 = 0x00;
#endif /* CONFIG_X86_64 */
asm volatile ("lidt %0" : : "m" (*idt));
asm volatile ("lgdt %0" : : "m" (*gdt));
asm volatile("cli");
return boot_params;
fail:
return NULL;
}