dect
/
linux-2.6
Archived
13
0
Fork 0
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/tools/perf/builtin-test.c

670 lines
16 KiB
C
Raw Normal View History

perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-29 21:58:32 +00:00
/*
* builtin-test.c
*
* Builtin regression testing command: ever growing number of sanity tests
*/
#include "builtin.h"
#include "util/cache.h"
#include "util/debug.h"
#include "util/evlist.h"
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-29 21:58:32 +00:00
#include "util/parse-options.h"
#include "util/parse-events.h"
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-29 21:58:32 +00:00
#include "util/symbol.h"
#include "util/thread_map.h"
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-29 21:58:32 +00:00
static long page_size;
static int vmlinux_matches_kallsyms_filter(struct map *map __used, struct symbol *sym)
{
bool *visited = symbol__priv(sym);
*visited = true;
return 0;
}
static int test__vmlinux_matches_kallsyms(void)
{
int err = -1;
struct rb_node *nd;
struct symbol *sym;
struct map *kallsyms_map, *vmlinux_map;
struct machine kallsyms, vmlinux;
enum map_type type = MAP__FUNCTION;
struct ref_reloc_sym ref_reloc_sym = { .name = "_stext", };
/*
* Step 1:
*
* Init the machines that will hold kernel, modules obtained from
* both vmlinux + .ko files and from /proc/kallsyms split by modules.
*/
machine__init(&kallsyms, "", HOST_KERNEL_ID);
machine__init(&vmlinux, "", HOST_KERNEL_ID);
/*
* Step 2:
*
* Create the kernel maps for kallsyms and the DSO where we will then
* load /proc/kallsyms. Also create the modules maps from /proc/modules
* and find the .ko files that match them in /lib/modules/`uname -r`/.
*/
if (machine__create_kernel_maps(&kallsyms) < 0) {
pr_debug("machine__create_kernel_maps ");
return -1;
}
/*
* Step 3:
*
* Load and split /proc/kallsyms into multiple maps, one per module.
*/
if (machine__load_kallsyms(&kallsyms, "/proc/kallsyms", type, NULL) <= 0) {
pr_debug("dso__load_kallsyms ");
goto out;
}
/*
* Step 4:
*
* kallsyms will be internally on demand sorted by name so that we can
* find the reference relocation * symbol, i.e. the symbol we will use
* to see if the running kernel was relocated by checking if it has the
* same value in the vmlinux file we load.
*/
kallsyms_map = machine__kernel_map(&kallsyms, type);
sym = map__find_symbol_by_name(kallsyms_map, ref_reloc_sym.name, NULL);
if (sym == NULL) {
pr_debug("dso__find_symbol_by_name ");
goto out;
}
ref_reloc_sym.addr = sym->start;
/*
* Step 5:
*
* Now repeat step 2, this time for the vmlinux file we'll auto-locate.
*/
if (machine__create_kernel_maps(&vmlinux) < 0) {
pr_debug("machine__create_kernel_maps ");
goto out;
}
vmlinux_map = machine__kernel_map(&vmlinux, type);
map__kmap(vmlinux_map)->ref_reloc_sym = &ref_reloc_sym;
/*
* Step 6:
*
* Locate a vmlinux file in the vmlinux path that has a buildid that
* matches the one of the running kernel.
*
* While doing that look if we find the ref reloc symbol, if we find it
* we'll have its ref_reloc_symbol.unrelocated_addr and then
* maps__reloc_vmlinux will notice and set proper ->[un]map_ip routines
* to fixup the symbols.
*/
if (machine__load_vmlinux_path(&vmlinux, type,
vmlinux_matches_kallsyms_filter) <= 0) {
pr_debug("machine__load_vmlinux_path ");
goto out;
}
err = 0;
/*
* Step 7:
*
* Now look at the symbols in the vmlinux DSO and check if we find all of them
* in the kallsyms dso. For the ones that are in both, check its names and
* end addresses too.
*/
for (nd = rb_first(&vmlinux_map->dso->symbols[type]); nd; nd = rb_next(nd)) {
perf test: Look forward for symbol aliases Not just before, fixing these false positives: [acme@mica linux]$ perf test -v 1 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (6 entries long) Using //lib/modules/2.6.37-rc5-00180-ge06b6bf/build/vmlinux for symbols 0xffffffff81058dc0: diff name v: sys_vm86old k: sys_ni_syscall 0xffffffff81058dc0: diff name v: sys_vm86 k: sys_ni_syscall 0xffffffff81058dc0: diff name v: sys_subpage_prot k: sys_ni_syscall 0xffffffff810b5f7c: diff name v: probe_kernel_write k: __probe_kernel_write 0xffffffff810b5fe5: diff name v: probe_kernel_read k: __probe_kernel_read 0xffffffff811bc380: diff name v: __memset k: memset 0xffffffff81384a98: diff name v: __sched_text_start k: sleep_on_common 0xffffffff81386750: diff name v: __sched_text_end k: _raw_spin_trylock 0xffffffff8138cee8: diff name v: __irqentry_text_start k: do_IRQ 0xffffffff8138f079: diff name v: __start_notes k: _etext 0xffffffff8138f079: diff name v: __stop_notes k: _etext ---- end ---- vmlinux symtab matches kallsyms: FAILED! [acme@mica linux]$ Some are weak functions, others are just markers, etc. They get in the rb tree with the same addr, so we need to look around to find the symbol with the same name. We were looking just at the previous entries with the same addr, look forward too. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Han Pingtian <phan@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-22 01:38:37 +00:00
struct symbol *pair, *first_pair;
bool backwards = true;
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-29 21:58:32 +00:00
sym = rb_entry(nd, struct symbol, rb_node);
perf test: Look forward for symbol aliases Not just before, fixing these false positives: [acme@mica linux]$ perf test -v 1 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (6 entries long) Using //lib/modules/2.6.37-rc5-00180-ge06b6bf/build/vmlinux for symbols 0xffffffff81058dc0: diff name v: sys_vm86old k: sys_ni_syscall 0xffffffff81058dc0: diff name v: sys_vm86 k: sys_ni_syscall 0xffffffff81058dc0: diff name v: sys_subpage_prot k: sys_ni_syscall 0xffffffff810b5f7c: diff name v: probe_kernel_write k: __probe_kernel_write 0xffffffff810b5fe5: diff name v: probe_kernel_read k: __probe_kernel_read 0xffffffff811bc380: diff name v: __memset k: memset 0xffffffff81384a98: diff name v: __sched_text_start k: sleep_on_common 0xffffffff81386750: diff name v: __sched_text_end k: _raw_spin_trylock 0xffffffff8138cee8: diff name v: __irqentry_text_start k: do_IRQ 0xffffffff8138f079: diff name v: __start_notes k: _etext 0xffffffff8138f079: diff name v: __stop_notes k: _etext ---- end ---- vmlinux symtab matches kallsyms: FAILED! [acme@mica linux]$ Some are weak functions, others are just markers, etc. They get in the rb tree with the same addr, so we need to look around to find the symbol with the same name. We were looking just at the previous entries with the same addr, look forward too. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Han Pingtian <phan@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-22 01:38:37 +00:00
if (sym->start == sym->end)
continue;
first_pair = machine__find_kernel_symbol(&kallsyms, type, sym->start, NULL, NULL);
pair = first_pair;
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-29 21:58:32 +00:00
if (pair && pair->start == sym->start) {
next_pair:
if (strcmp(sym->name, pair->name) == 0) {
/*
* kallsyms don't have the symbol end, so we
* set that by using the next symbol start - 1,
* in some cases we get this up to a page
* wrong, trace_kmalloc when I was developing
* this code was one such example, 2106 bytes
* off the real size. More than that and we
* _really_ have a problem.
*/
s64 skew = sym->end - pair->end;
if (llabs(skew) < page_size)
continue;
pr_debug("%#" PRIx64 ": diff end addr for %s v: %#" PRIx64 " k: %#" PRIx64 "\n",
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-29 21:58:32 +00:00
sym->start, sym->name, sym->end, pair->end);
} else {
perf test: Look forward for symbol aliases Not just before, fixing these false positives: [acme@mica linux]$ perf test -v 1 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (6 entries long) Using //lib/modules/2.6.37-rc5-00180-ge06b6bf/build/vmlinux for symbols 0xffffffff81058dc0: diff name v: sys_vm86old k: sys_ni_syscall 0xffffffff81058dc0: diff name v: sys_vm86 k: sys_ni_syscall 0xffffffff81058dc0: diff name v: sys_subpage_prot k: sys_ni_syscall 0xffffffff810b5f7c: diff name v: probe_kernel_write k: __probe_kernel_write 0xffffffff810b5fe5: diff name v: probe_kernel_read k: __probe_kernel_read 0xffffffff811bc380: diff name v: __memset k: memset 0xffffffff81384a98: diff name v: __sched_text_start k: sleep_on_common 0xffffffff81386750: diff name v: __sched_text_end k: _raw_spin_trylock 0xffffffff8138cee8: diff name v: __irqentry_text_start k: do_IRQ 0xffffffff8138f079: diff name v: __start_notes k: _etext 0xffffffff8138f079: diff name v: __stop_notes k: _etext ---- end ---- vmlinux symtab matches kallsyms: FAILED! [acme@mica linux]$ Some are weak functions, others are just markers, etc. They get in the rb tree with the same addr, so we need to look around to find the symbol with the same name. We were looking just at the previous entries with the same addr, look forward too. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Han Pingtian <phan@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-22 01:38:37 +00:00
struct rb_node *nnd;
detour:
nnd = backwards ? rb_prev(&pair->rb_node) :
rb_next(&pair->rb_node);
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-29 21:58:32 +00:00
if (nnd) {
struct symbol *next = rb_entry(nnd, struct symbol, rb_node);
if (next->start == sym->start) {
pair = next;
goto next_pair;
}
}
perf test: Look forward for symbol aliases Not just before, fixing these false positives: [acme@mica linux]$ perf test -v 1 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (6 entries long) Using //lib/modules/2.6.37-rc5-00180-ge06b6bf/build/vmlinux for symbols 0xffffffff81058dc0: diff name v: sys_vm86old k: sys_ni_syscall 0xffffffff81058dc0: diff name v: sys_vm86 k: sys_ni_syscall 0xffffffff81058dc0: diff name v: sys_subpage_prot k: sys_ni_syscall 0xffffffff810b5f7c: diff name v: probe_kernel_write k: __probe_kernel_write 0xffffffff810b5fe5: diff name v: probe_kernel_read k: __probe_kernel_read 0xffffffff811bc380: diff name v: __memset k: memset 0xffffffff81384a98: diff name v: __sched_text_start k: sleep_on_common 0xffffffff81386750: diff name v: __sched_text_end k: _raw_spin_trylock 0xffffffff8138cee8: diff name v: __irqentry_text_start k: do_IRQ 0xffffffff8138f079: diff name v: __start_notes k: _etext 0xffffffff8138f079: diff name v: __stop_notes k: _etext ---- end ---- vmlinux symtab matches kallsyms: FAILED! [acme@mica linux]$ Some are weak functions, others are just markers, etc. They get in the rb tree with the same addr, so we need to look around to find the symbol with the same name. We were looking just at the previous entries with the same addr, look forward too. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Han Pingtian <phan@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-22 01:38:37 +00:00
if (backwards) {
backwards = false;
pair = first_pair;
goto detour;
}
pr_debug("%#" PRIx64 ": diff name v: %s k: %s\n",
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-29 21:58:32 +00:00
sym->start, sym->name, pair->name);
}
} else
pr_debug("%#" PRIx64 ": %s not on kallsyms\n", sym->start, sym->name);
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-29 21:58:32 +00:00
err = -1;
}
if (!verbose)
goto out;
pr_info("Maps only in vmlinux:\n");
for (nd = rb_first(&vmlinux.kmaps.maps[type]); nd; nd = rb_next(nd)) {
struct map *pos = rb_entry(nd, struct map, rb_node), *pair;
/*
* If it is the kernel, kallsyms is always "[kernel.kallsyms]", while
* the kernel will have the path for the vmlinux file being used,
* so use the short name, less descriptive but the same ("[kernel]" in
* both cases.
*/
pair = map_groups__find_by_name(&kallsyms.kmaps, type,
(pos->dso->kernel ?
pos->dso->short_name :
pos->dso->name));
if (pair)
pair->priv = 1;
else
map__fprintf(pos, stderr);
}
pr_info("Maps in vmlinux with a different name in kallsyms:\n");
for (nd = rb_first(&vmlinux.kmaps.maps[type]); nd; nd = rb_next(nd)) {
struct map *pos = rb_entry(nd, struct map, rb_node), *pair;
pair = map_groups__find(&kallsyms.kmaps, type, pos->start);
if (pair == NULL || pair->priv)
continue;
if (pair->start == pos->start) {
pair->priv = 1;
pr_info(" %" PRIx64 "-%" PRIx64 " %" PRIx64 " %s in kallsyms as",
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-29 21:58:32 +00:00
pos->start, pos->end, pos->pgoff, pos->dso->name);
if (pos->pgoff != pair->pgoff || pos->end != pair->end)
pr_info(": \n*%" PRIx64 "-%" PRIx64 " %" PRIx64 "",
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-29 21:58:32 +00:00
pair->start, pair->end, pair->pgoff);
pr_info(" %s\n", pair->dso->name);
pair->priv = 1;
}
}
pr_info("Maps only in kallsyms:\n");
for (nd = rb_first(&kallsyms.kmaps.maps[type]);
nd; nd = rb_next(nd)) {
struct map *pos = rb_entry(nd, struct map, rb_node);
if (!pos->priv)
map__fprintf(pos, stderr);
}
out:
return err;
}
#include "util/cpumap.h"
#include "util/evsel.h"
#include <sys/types.h>
static int trace_event__id(const char *evname)
{
char *filename;
int err = -1, fd;
if (asprintf(&filename,
"/sys/kernel/debug/tracing/events/syscalls/%s/id",
evname) < 0)
return -1;
fd = open(filename, O_RDONLY);
if (fd >= 0) {
char id[16];
if (read(fd, id, sizeof(id)) > 0)
err = atoi(id);
close(fd);
}
free(filename);
return err;
}
static int test__open_syscall_event(void)
{
int err = -1, fd;
struct thread_map *threads;
struct perf_evsel *evsel;
struct perf_event_attr attr;
unsigned int nr_open_calls = 111, i;
int id = trace_event__id("sys_enter_open");
if (id < 0) {
pr_debug("is debugfs mounted on /sys/kernel/debug?\n");
return -1;
}
threads = thread_map__new(-1, getpid());
if (threads == NULL) {
pr_debug("thread_map__new\n");
return -1;
}
memset(&attr, 0, sizeof(attr));
attr.type = PERF_TYPE_TRACEPOINT;
attr.config = id;
evsel = perf_evsel__new(&attr, 0);
if (evsel == NULL) {
pr_debug("perf_evsel__new\n");
goto out_thread_map_delete;
}
if (perf_evsel__open_per_thread(evsel, threads, false) < 0) {
pr_debug("failed to open counter: %s, "
"tweak /proc/sys/kernel/perf_event_paranoid?\n",
strerror(errno));
goto out_evsel_delete;
}
for (i = 0; i < nr_open_calls; ++i) {
fd = open("/etc/passwd", O_RDONLY);
close(fd);
}
if (perf_evsel__read_on_cpu(evsel, 0, 0) < 0) {
pr_debug("perf_evsel__read_on_cpu\n");
goto out_close_fd;
}
if (evsel->counts->cpu[0].val != nr_open_calls) {
pr_debug("perf_evsel__read_on_cpu: expected to intercept %d calls, got %" PRIu64 "\n",
nr_open_calls, evsel->counts->cpu[0].val);
goto out_close_fd;
}
err = 0;
out_close_fd:
perf_evsel__close_fd(evsel, 1, threads->nr);
out_evsel_delete:
perf_evsel__delete(evsel);
out_thread_map_delete:
thread_map__delete(threads);
return err;
}
#include <sched.h>
static int test__open_syscall_event_on_all_cpus(void)
{
int err = -1, fd, cpu;
struct thread_map *threads;
struct cpu_map *cpus;
struct perf_evsel *evsel;
struct perf_event_attr attr;
unsigned int nr_open_calls = 111, i;
cpu_set_t cpu_set;
int id = trace_event__id("sys_enter_open");
if (id < 0) {
pr_debug("is debugfs mounted on /sys/kernel/debug?\n");
return -1;
}
threads = thread_map__new(-1, getpid());
if (threads == NULL) {
pr_debug("thread_map__new\n");
return -1;
}
cpus = cpu_map__new(NULL);
if (cpus == NULL) {
pr_debug("cpu_map__new\n");
goto out_thread_map_delete;
}
CPU_ZERO(&cpu_set);
memset(&attr, 0, sizeof(attr));
attr.type = PERF_TYPE_TRACEPOINT;
attr.config = id;
evsel = perf_evsel__new(&attr, 0);
if (evsel == NULL) {
pr_debug("perf_evsel__new\n");
goto out_thread_map_delete;
}
if (perf_evsel__open(evsel, cpus, threads, false) < 0) {
pr_debug("failed to open counter: %s, "
"tweak /proc/sys/kernel/perf_event_paranoid?\n",
strerror(errno));
goto out_evsel_delete;
}
for (cpu = 0; cpu < cpus->nr; ++cpu) {
unsigned int ncalls = nr_open_calls + cpu;
/*
* XXX eventually lift this restriction in a way that
* keeps perf building on older glibc installations
* without CPU_ALLOC. 1024 cpus in 2010 still seems
* a reasonable upper limit tho :-)
*/
if (cpus->map[cpu] >= CPU_SETSIZE) {
pr_debug("Ignoring CPU %d\n", cpus->map[cpu]);
continue;
}
CPU_SET(cpus->map[cpu], &cpu_set);
if (sched_setaffinity(0, sizeof(cpu_set), &cpu_set) < 0) {
pr_debug("sched_setaffinity() failed on CPU %d: %s ",
cpus->map[cpu],
strerror(errno));
goto out_close_fd;
}
for (i = 0; i < ncalls; ++i) {
fd = open("/etc/passwd", O_RDONLY);
close(fd);
}
CPU_CLR(cpus->map[cpu], &cpu_set);
}
/*
* Here we need to explicitely preallocate the counts, as if
* we use the auto allocation it will allocate just for 1 cpu,
* as we start by cpu 0.
*/
if (perf_evsel__alloc_counts(evsel, cpus->nr) < 0) {
pr_debug("perf_evsel__alloc_counts(ncpus=%d)\n", cpus->nr);
goto out_close_fd;
}
err = 0;
for (cpu = 0; cpu < cpus->nr; ++cpu) {
unsigned int expected;
if (cpus->map[cpu] >= CPU_SETSIZE)
continue;
if (perf_evsel__read_on_cpu(evsel, cpu, 0) < 0) {
pr_debug("perf_evsel__read_on_cpu\n");
err = -1;
break;
}
expected = nr_open_calls + cpu;
if (evsel->counts->cpu[cpu].val != expected) {
pr_debug("perf_evsel__read_on_cpu: expected to intercept %d calls on cpu %d, got %" PRIu64 "\n",
expected, cpus->map[cpu], evsel->counts->cpu[cpu].val);
err = -1;
}
}
out_close_fd:
perf_evsel__close_fd(evsel, 1, threads->nr);
out_evsel_delete:
perf_evsel__delete(evsel);
out_thread_map_delete:
thread_map__delete(threads);
return err;
}
/*
* This test will generate random numbers of calls to some getpid syscalls,
* then establish an mmap for a group of events that are created to monitor
* the syscalls.
*
* It will receive the events, using mmap, use its PERF_SAMPLE_ID generated
* sample.id field to map back to its respective perf_evsel instance.
*
* Then it checks if the number of syscalls reported as perf events by
* the kernel corresponds to the number of syscalls made.
*/
static int test__basic_mmap(void)
{
int err = -1;
union perf_event *event;
struct thread_map *threads;
struct cpu_map *cpus;
struct perf_evlist *evlist;
struct perf_event_attr attr = {
.type = PERF_TYPE_TRACEPOINT,
.read_format = PERF_FORMAT_ID,
.sample_type = PERF_SAMPLE_ID,
.watermark = 0,
};
cpu_set_t cpu_set;
const char *syscall_names[] = { "getsid", "getppid", "getpgrp",
"getpgid", };
pid_t (*syscalls[])(void) = { (void *)getsid, getppid, getpgrp,
(void*)getpgid };
#define nsyscalls ARRAY_SIZE(syscall_names)
int ids[nsyscalls];
unsigned int nr_events[nsyscalls],
expected_nr_events[nsyscalls], i, j;
struct perf_evsel *evsels[nsyscalls], *evsel;
int sample_size = perf_sample_size(attr.sample_type);
for (i = 0; i < nsyscalls; ++i) {
char name[64];
snprintf(name, sizeof(name), "sys_enter_%s", syscall_names[i]);
ids[i] = trace_event__id(name);
if (ids[i] < 0) {
pr_debug("Is debugfs mounted on /sys/kernel/debug?\n");
return -1;
}
nr_events[i] = 0;
expected_nr_events[i] = random() % 257;
}
threads = thread_map__new(-1, getpid());
if (threads == NULL) {
pr_debug("thread_map__new\n");
return -1;
}
cpus = cpu_map__new(NULL);
if (cpus == NULL) {
pr_debug("cpu_map__new\n");
goto out_free_threads;
}
CPU_ZERO(&cpu_set);
CPU_SET(cpus->map[0], &cpu_set);
sched_setaffinity(0, sizeof(cpu_set), &cpu_set);
if (sched_setaffinity(0, sizeof(cpu_set), &cpu_set) < 0) {
pr_debug("sched_setaffinity() failed on CPU %d: %s ",
cpus->map[0], strerror(errno));
goto out_free_cpus;
}
evlist = perf_evlist__new(cpus, threads);
if (evlist == NULL) {
pr_debug("perf_evlist__new\n");
goto out_free_cpus;
}
/* anonymous union fields, can't be initialized above */
attr.wakeup_events = 1;
attr.sample_period = 1;
for (i = 0; i < nsyscalls; ++i) {
attr.config = ids[i];
evsels[i] = perf_evsel__new(&attr, i);
if (evsels[i] == NULL) {
pr_debug("perf_evsel__new\n");
goto out_free_evlist;
}
perf_evlist__add(evlist, evsels[i]);
if (perf_evsel__open(evsels[i], cpus, threads, false) < 0) {
pr_debug("failed to open counter: %s, "
"tweak /proc/sys/kernel/perf_event_paranoid?\n",
strerror(errno));
goto out_close_fd;
}
}
if (perf_evlist__mmap(evlist, 128, true) < 0) {
pr_debug("failed to mmap events: %d (%s)\n", errno,
strerror(errno));
goto out_close_fd;
}
for (i = 0; i < nsyscalls; ++i)
for (j = 0; j < expected_nr_events[i]; ++j) {
int foo = syscalls[i]();
++foo;
}
while ((event = perf_evlist__read_on_cpu(evlist, 0)) != NULL) {
struct perf_sample sample;
if (event->header.type != PERF_RECORD_SAMPLE) {
pr_debug("unexpected %s event\n",
perf_event__name(event->header.type));
goto out_munmap;
}
perf_event__parse_sample(event, attr.sample_type, sample_size,
false, &sample);
evsel = perf_evlist__id2evsel(evlist, sample.id);
if (evsel == NULL) {
pr_debug("event with id %" PRIu64
" doesn't map to an evsel\n", sample.id);
goto out_munmap;
}
nr_events[evsel->idx]++;
}
list_for_each_entry(evsel, &evlist->entries, node) {
if (nr_events[evsel->idx] != expected_nr_events[evsel->idx]) {
pr_debug("expected %d %s events, got %d\n",
expected_nr_events[evsel->idx],
event_name(evsel), nr_events[evsel->idx]);
goto out_munmap;
}
}
err = 0;
out_munmap:
perf_evlist__munmap(evlist);
out_close_fd:
for (i = 0; i < nsyscalls; ++i)
perf_evsel__close_fd(evsels[i], 1, threads->nr);
out_free_evlist:
perf_evlist__delete(evlist);
out_free_cpus:
cpu_map__delete(cpus);
out_free_threads:
thread_map__delete(threads);
return err;
#undef nsyscalls
}
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-29 21:58:32 +00:00
static struct test {
const char *desc;
int (*func)(void);
} tests[] = {
{
.desc = "vmlinux symtab matches kallsyms",
.func = test__vmlinux_matches_kallsyms,
},
{
.desc = "detect open syscall event",
.func = test__open_syscall_event,
},
{
.desc = "detect open syscall event on all cpus",
.func = test__open_syscall_event_on_all_cpus,
},
{
.desc = "read samples using the mmap interface",
.func = test__basic_mmap,
},
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-29 21:58:32 +00:00
{
.func = NULL,
},
};
static int __cmd_test(void)
{
int i = 0;
page_size = sysconf(_SC_PAGE_SIZE);
while (tests[i].func) {
int err;
pr_info("%2d: %s:", i + 1, tests[i].desc);
pr_debug("\n--- start ---\n");
err = tests[i].func();
pr_debug("---- end ----\n%s:", tests[i].desc);
pr_info(" %s\n", err ? "FAILED!\n" : "Ok");
++i;
}
return 0;
}
static const char * const test_usage[] = {
"perf test [<options>]",
NULL,
};
static const struct option test_options[] = {
OPT_INTEGER('v', "verbose", &verbose,
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-29 21:58:32 +00:00
"be more verbose (show symbol address, etc)"),
OPT_END()
};
int cmd_test(int argc, const char **argv, const char *prefix __used)
{
argc = parse_options(argc, argv, test_options, test_usage, 0);
if (argc)
usage_with_options(test_usage, test_options);
symbol_conf.priv_size = sizeof(int);
symbol_conf.sort_by_name = true;
symbol_conf.try_vmlinux_path = true;
if (symbol__init() < 0)
return -1;
setup_pager();
return __cmd_test();
}