1494 lines
58 KiB
C
1494 lines
58 KiB
C
![]() |
/*****************************************************************************
|
||
|
* Copyright(c) 2008, RealTEK Technology Inc. All Right Reserved.
|
||
|
*
|
||
|
* Module: __INC_HAL8192SEREG_H
|
||
|
*
|
||
|
*
|
||
|
* Note: 1. Define Mac register address and corresponding bit mask map
|
||
|
* 2. CCX register
|
||
|
* 3. Backward compatible register with useless address.
|
||
|
* 4. Define 92SU required register address and definition.
|
||
|
*
|
||
|
*
|
||
|
* Export: Constants, macro, functions(API), global variables(None).
|
||
|
*
|
||
|
* Abbrev:
|
||
|
*
|
||
|
* History:
|
||
|
* Data Who Remark
|
||
|
* 08/07/2007 MHC 1. Porting from 9x series PHYCFG.h.
|
||
|
* 2. Reorganize code architecture.
|
||
|
*
|
||
|
*****************************************************************************/
|
||
|
#ifndef R8192S_HW
|
||
|
#define R8192S_HW
|
||
|
|
||
|
typedef enum _VERSION_8192S{
|
||
|
VERSION_8192S_ACUT,
|
||
|
VERSION_8192S_BCUT,
|
||
|
VERSION_8192S_CCUT
|
||
|
}VERSION_8192S,*PVERSION_8192S;
|
||
|
|
||
|
//#ifdef RTL8192SU
|
||
|
typedef enum _VERSION_8192SUsb{
|
||
|
VERSION_8192SU_A, //A-Cut
|
||
|
VERSION_8192SU_B, //B-Cut
|
||
|
VERSION_8192SU_C, //C-Cut
|
||
|
}VERSION_8192SUsb, *PVERSION_8192SUsb;
|
||
|
//#else
|
||
|
typedef enum _VERSION_819xU{
|
||
|
VERSION_819xU_A, // A-cut
|
||
|
VERSION_819xU_B, // B-cut
|
||
|
VERSION_819xU_C,// C-cut
|
||
|
}VERSION_819xU,*PVERSION_819xU;
|
||
|
//#endif
|
||
|
|
||
|
/* 2007/11/15 MH Define different RF type. */
|
||
|
typedef enum _RT_RF_TYPE_DEFINITION
|
||
|
{
|
||
|
RF_1T2R = 0,
|
||
|
RF_2T4R,
|
||
|
RF_2T2R,
|
||
|
RF_1T1R,
|
||
|
RF_2T2R_GREEN,
|
||
|
//RF_3T3R,
|
||
|
//RF_3T4R,
|
||
|
//RF_4T4R,
|
||
|
RF_819X_MAX_TYPE
|
||
|
}RT_RF_TYPE_DEF_E;
|
||
|
|
||
|
typedef enum _BaseBand_Config_Type{
|
||
|
BaseBand_Config_PHY_REG = 0, //Radio Path A
|
||
|
BaseBand_Config_AGC_TAB = 1, //Radio Path B
|
||
|
}BaseBand_Config_Type, *PBaseBand_Config_Type;
|
||
|
|
||
|
#define RTL8187_REQT_READ 0xc0
|
||
|
#define RTL8187_REQT_WRITE 0x40
|
||
|
#define RTL8187_REQ_GET_REGS 0x05
|
||
|
#define RTL8187_REQ_SET_REGS 0x05
|
||
|
|
||
|
#define MAX_TX_URB 5
|
||
|
#define MAX_RX_URB 16
|
||
|
|
||
|
#define R8180_MAX_RETRY 255
|
||
|
//#define MAX_RX_NORMAL_URB 3
|
||
|
//#define MAX_RX_COMMAND_URB 2
|
||
|
#define RX_URB_SIZE 9100
|
||
|
|
||
|
#define BB_ANTATTEN_CHAN14 0x0c
|
||
|
#define BB_ANTENNA_B 0x40
|
||
|
|
||
|
#define BB_HOST_BANG (1<<30)
|
||
|
#define BB_HOST_BANG_EN (1<<2)
|
||
|
#define BB_HOST_BANG_CLK (1<<1)
|
||
|
#define BB_HOST_BANG_RW (1<<3)
|
||
|
#define BB_HOST_BANG_DATA 1
|
||
|
|
||
|
|
||
|
//============================================================
|
||
|
// 8192S Regsiter bit
|
||
|
//============================================================
|
||
|
#define BB_GLOBAL_RESET_BIT 0x1
|
||
|
|
||
|
#define CR_RST 0x10
|
||
|
#define CR_RE 0x08
|
||
|
#define CR_TE 0x04
|
||
|
#define CR_MulRW 0x01
|
||
|
|
||
|
#define MAC_FILTER_MASK ((1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<5) | \
|
||
|
(1<<12) | (1<<18) | (1<<19) | (1<<20) | (1<<21) | (1<<22) | (1<<23))
|
||
|
|
||
|
#define RX_FIFO_THRESHOLD_MASK ((1<<13) | (1<<14) | (1<<15))
|
||
|
#define RX_FIFO_THRESHOLD_SHIFT 13
|
||
|
#define RX_FIFO_THRESHOLD_128 3
|
||
|
#define RX_FIFO_THRESHOLD_256 4
|
||
|
#define RX_FIFO_THRESHOLD_512 5
|
||
|
#define RX_FIFO_THRESHOLD_1024 6
|
||
|
#define RX_FIFO_THRESHOLD_NONE 7
|
||
|
|
||
|
#define MAX_RX_DMA_MASK ((1<<8) | (1<<9) | (1<<10))
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8190 CPU General Register (offset 0x100, 4 byte)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define CPU_CCK_LOOPBACK 0x00030000
|
||
|
#define CPU_GEN_SYSTEM_RESET 0x00000001
|
||
|
#define CPU_GEN_FIRMWARE_RESET 0x00000008
|
||
|
#define CPU_GEN_BOOT_RDY 0x00000010
|
||
|
#define CPU_GEN_FIRM_RDY 0x00000020
|
||
|
#define CPU_GEN_PUT_CODE_OK 0x00000080
|
||
|
#define CPU_GEN_BB_RST 0x00000100
|
||
|
#define CPU_GEN_PWR_STB_CPU 0x00000004
|
||
|
#define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19
|
||
|
#define CPU_GEN_NO_LOOPBACK_SET 0x00080000 // Set BIT19 to 1
|
||
|
//----------------------------------------------------------------------------
|
||
|
////
|
||
|
//// 8190 AcmHwCtrl bits (offset 0x171, 1 byte)
|
||
|
////----------------------------------------------------------------------------
|
||
|
#define MSR_LINK_MASK ((1<<0)|(1<<1))
|
||
|
#define MSR_LINK_MANAGED 2
|
||
|
#define MSR_LINK_NONE 0
|
||
|
#define MSR_LINK_SHIFT 0
|
||
|
#define MSR_LINK_ADHOC 1
|
||
|
#define MSR_LINK_MASTER 3
|
||
|
#define MSR_LINK_ENEDCA (1<<4)
|
||
|
|
||
|
|
||
|
//#define Cmd9346CR_9356SEL (1<<4)
|
||
|
#define EPROM_CMD_RESERVED_MASK (1<<5)
|
||
|
#define EPROM_CMD_OPERATING_MODE_SHIFT 6
|
||
|
#define EPROM_CMD_OPERATING_MODE_MASK ((1<<7)|(1<<6))
|
||
|
#define EPROM_CMD_CONFIG 0x3
|
||
|
#define EPROM_CMD_NORMAL 0
|
||
|
#define EPROM_CMD_LOAD 1
|
||
|
#define EPROM_CMD_PROGRAM 2
|
||
|
#define EPROM_CS_SHIFT 3
|
||
|
#define EPROM_CK_SHIFT 2
|
||
|
#define EPROM_W_SHIFT 1
|
||
|
#define EPROM_R_SHIFT 0
|
||
|
|
||
|
//#define MAC0 0x000,
|
||
|
//#define MAC1 0x001,
|
||
|
//#define MAC2 0x002,
|
||
|
//#define MAC3 0x003,
|
||
|
//#define MAC4 0x004,
|
||
|
//#define MAC5 0x005,
|
||
|
|
||
|
//============================================================
|
||
|
// 8192S Regsiter offset definition
|
||
|
//============================================================
|
||
|
|
||
|
//
|
||
|
// MAC register 0x0 - 0x5xx
|
||
|
// 1. System configuration registers.
|
||
|
// 2. Command Control Registers
|
||
|
// 3. MACID Setting Registers
|
||
|
// 4. Timing Control Registers
|
||
|
// 5. FIFO Control Registers
|
||
|
// 6. Adaptive Control Registers
|
||
|
// 7. EDCA Setting Registers
|
||
|
// 8. WMAC, BA and CCX related Register.
|
||
|
// 9. Security Control Registers
|
||
|
// 10. Power Save Control Registers
|
||
|
// 11. General Purpose Registers
|
||
|
// 12. Host Interrupt Status Registers
|
||
|
// 13. Test Mode and Debug Control Registers
|
||
|
// 14. PCIE config register
|
||
|
//
|
||
|
|
||
|
|
||
|
//
|
||
|
// 1. System Configuration Registers (Offset: 0x0000 - 0x003F)
|
||
|
//
|
||
|
#define SYS_ISO_CTRL 0x0000 // System Isolation Interface Control.
|
||
|
#define SYS_FUNC_EN 0x0002 // System Function Enable.
|
||
|
#define PMC_FSM 0x0004 // Power Sequence Control.
|
||
|
#define SYS_CLKR 0x0008 // System Clock.
|
||
|
#define EPROM_CMD 0x000A // 93C46/93C56 Command Register. (win CR93C46)
|
||
|
#define EE_VPD 0x000C // EEPROM VPD Data.
|
||
|
#define AFE_MISC 0x0010 // AFE Misc.
|
||
|
#define SPS0_CTRL 0x0011 // Switching Power Supply 0 Control.
|
||
|
#define SPS1_CTRL 0x0018 // Switching Power Supply 1 Control.
|
||
|
#define RF_CTRL 0x001F // RF Block Control.
|
||
|
#define LDOA15_CTRL 0x0020 // V15 Digital LDO Control.
|
||
|
#define LDOV12D_CTRL 0x0021 // V12 Digital LDO Control.
|
||
|
#define LDOHCI12_CTRL 0x0022 // V12 Digital LDO Control.
|
||
|
#define LDO_USB_SDIO 0x0023 // LDO USB Control.
|
||
|
#define LPLDO_CTRL 0x0024 // Low Power LDO Control.
|
||
|
#define AFE_XTAL_CTRL 0x0026 // AFE Crystal Control.
|
||
|
#define AFE_PLL_CTRL 0x0028 // System Function Enable.
|
||
|
#define EFUSE_CTRL 0x0030 // E-Fuse Control.
|
||
|
#define EFUSE_TEST 0x0034 // E-Fuse Test.
|
||
|
#define PWR_DATA 0x0038 // Power on date.
|
||
|
#define DBG_PORT 0x003A // MAC debug port select
|
||
|
#define DPS_TIMER 0x003C // Deep Power Save Timer Register.
|
||
|
#define RCLK_MON 0x003E // Retention Clock Monitor.
|
||
|
|
||
|
//
|
||
|
// 2. Command Control Registers (Offset: 0x0040 - 0x004F)
|
||
|
//
|
||
|
#define CMDR 0x0040 // MAC Command Register.
|
||
|
#define TXPAUSE 0x0042 // Transmission Pause Register.
|
||
|
#define LBKMD_SEL 0x0043 // Loopback Mode Select Register.
|
||
|
#define TCR 0x0044 // Transmit Configuration Register
|
||
|
#define RCR 0x0048 // Receive Configuration Register
|
||
|
#define MSR 0x004C // Media Status register
|
||
|
#define SYSF_CFG 0x004D // System Function Configuration.
|
||
|
#define RX_PKY_LIMIT 0x004E // RX packet length limit
|
||
|
#define MBIDCTRL 0x004F // MBSSID Control.
|
||
|
|
||
|
//
|
||
|
// 3. MACID Setting Registers (Offset: 0x0050 - 0x007F)
|
||
|
//
|
||
|
#define MACIDR 0x0050 // MAC ID Register, Offset 0x0050-0x0055
|
||
|
#define MACIDR0 0x0050 // MAC ID Register, Offset 0x0050-0x0053
|
||
|
#define MACIDR4 0x0054 // MAC ID Register, Offset 0x0054-0x0055
|
||
|
#define BSSIDR 0x0058 // BSSID Register, Offset 0x0058-0x005D
|
||
|
#define HWVID 0x005E // HW Version ID.
|
||
|
#define MAR 0x0060 // Multicase Address.
|
||
|
#define MBIDCAMCONTENT 0x0068 // MBSSID CAM Content.
|
||
|
#define MBIDCAMCFG 0x0070 // MBSSID CAM Configuration.
|
||
|
#define BUILDTIME 0x0074 // Build Time Register.
|
||
|
#define BUILDUSER 0x0078 // Build User Register.
|
||
|
|
||
|
// Redifine MACID register, to compatible prior ICs.
|
||
|
#define IDR0 MACIDR0
|
||
|
#define IDR4 MACIDR4
|
||
|
|
||
|
//
|
||
|
// 4. Timing Control Registers (Offset: 0x0080 - 0x009F)
|
||
|
//
|
||
|
#define TSFR 0x0080 // Timing Sync Function Timer Register.
|
||
|
#define SLOT_TIME 0x0089 // Slot Time Register, in us.
|
||
|
#define USTIME 0x008A // EDCA/TSF clock unit time us unit.
|
||
|
#define SIFS_CCK 0x008C // SIFS for CCK, in us.
|
||
|
#define SIFS_OFDM 0x008E // SIFS for OFDM, in us.
|
||
|
#define PIFS_TIME 0x0090 // PIFS time register.
|
||
|
#define ACK_TIMEOUT 0x0091 // Ack Timeout Register
|
||
|
#define EIFSTR 0x0092 // EIFS time regiser.
|
||
|
#define BCN_INTERVAL 0x0094 // Beacon Interval, in TU.
|
||
|
#define ATIMWND 0x0096 // ATIM Window width, in TU.
|
||
|
#define BCN_DRV_EARLY_INT 0x0098 // Driver Early Interrupt.
|
||
|
#define BCN_DMATIME 0x009A // Beacon DMA and ATIM INT Time.
|
||
|
#define BCN_ERR_THRESH 0x009C // Beacon Error Threshold.
|
||
|
#define MLT 0x009D // MSDU Lifetime.
|
||
|
#define RSVD_MAC_TUNE_US 0x009E // MAC Internal USE.
|
||
|
|
||
|
//
|
||
|
// 5. FIFO Control Registers (Offset: 0x00A0 - 0x015F)
|
||
|
//
|
||
|
#define RQPN 0x00A0
|
||
|
#define RQPN1 0x00A0 // Reserved Queue Page Number for BK
|
||
|
#define RQPN2 0x00A1 // Reserved Queue Page Number for BE
|
||
|
#define RQPN3 0x00A2 // Reserved Queue Page Number for VI
|
||
|
#define RQPN4 0x00A3 // Reserved Queue Page Number for VO
|
||
|
#define RQPN5 0x00A4 // Reserved Queue Page Number for HCCA
|
||
|
#define RQPN6 0x00A5 // Reserved Queue Page Number for CMD
|
||
|
#define RQPN7 0x00A6 // Reserved Queue Page Number for MGNT
|
||
|
#define RQPN8 0x00A7 // Reserved Queue Page Number for HIGH
|
||
|
#define RQPN9 0x00A8 // Reserved Queue Page Number for Beacon
|
||
|
#define RQPN10 0x00A9 // Reserved Queue Page Number for Public
|
||
|
#define LD_RQPN 0x00AB //
|
||
|
#define RXFF_BNDY 0x00AC //
|
||
|
#define RXRPT_BNDY 0x00B0 //
|
||
|
#define TXPKTBUF_PGBNDY 0x00B4 //
|
||
|
#define PBP 0x00B5 //
|
||
|
#define RXDRVINFO_SZ 0x00B6 //
|
||
|
#define TXFF_STATUS 0x00B7 //
|
||
|
#define RXFF_STATUS 0x00B8 //
|
||
|
#define TXFF_EMPTY_TH 0x00B9 //
|
||
|
#define SDIO_RX_BLKSZ 0x00BC //
|
||
|
#define RXDMA 0x00BD //
|
||
|
#define RXPKT_NUM 0x00BE //
|
||
|
#define C2HCMD_UDT_SIZE 0x00C0 //
|
||
|
#define C2HCMD_UDT_ADDR 0x00C2 //
|
||
|
#define FIFOPAGE1 0x00C4 // Available public queue page number
|
||
|
#define FIFOPAGE2 0x00C8 //
|
||
|
#define FIFOPAGE3 0x00CC //
|
||
|
#define FIFOPAGE4 0x00D0 //
|
||
|
#define FIFOPAGE5 0x00D4 //
|
||
|
#define FW_RSVD_PG_CRTL 0x00D8 //
|
||
|
#define RXDMA_AGG_PG_TH 0x00D9 //
|
||
|
#define TXRPTFF_RDPTR 0x00E0 //
|
||
|
#define TXRPTFF_WTPTR 0x00E4 //
|
||
|
#define C2HFF_RDPTR 0x00E8 //FIFO Read pointer register.
|
||
|
#define C2HFF_WTPTR 0x00EC //FIFO Write pointer register.
|
||
|
#define RXFF0_RDPTR 0x00F0 //
|
||
|
#define RXFF0_WTPTR 0x00F4 //
|
||
|
#define RXFF1_RDPTR 0x00F8 //
|
||
|
#define RXFF1_WTPTR 0x00FC //
|
||
|
#define RXRPT0_RDPTR 0x0100 //
|
||
|
#define RXRPT0_WTPTR 0x0104 //
|
||
|
#define RXRPT1_RDPTR 0x0108 //
|
||
|
#define RXRPT1_WTPTR 0x010C //
|
||
|
#define RX0_UDT_SIZE 0x0110 //
|
||
|
#define RX1PKTNUM 0x0114 //
|
||
|
#define RXFILTERMAP 0x0116 //
|
||
|
#define RXFILTERMAP_GP1 0x0118 //
|
||
|
#define RXFILTERMAP_GP2 0x011A //
|
||
|
#define RXFILTERMAP_GP3 0x011C //
|
||
|
#define BCNQ_CTRL 0x0120 //
|
||
|
#define MGTQ_CTRL 0x0124 //
|
||
|
#define HIQ_CTRL 0x0128 //
|
||
|
#define VOTID7_CTRL 0x012c //
|
||
|
#define VOTID6_CTRL 0x0130 //
|
||
|
#define VITID5_CTRL 0x0134 //
|
||
|
#define VITID4_CTRL 0x0138 //
|
||
|
#define BETID3_CTRL 0x013c //
|
||
|
#define BETID0_CTRL 0x0140 //
|
||
|
#define BKTID2_CTRL 0x0144 //
|
||
|
#define BKTID1_CTRL 0x0148 //
|
||
|
#define CMDQ_CTRL 0x014c //
|
||
|
#define TXPKT_NUM_CTRL 0x0150 //
|
||
|
#define TXQ_PGADD 0x0152 //
|
||
|
#define TXFF_PG_NUM 0x0154 //
|
||
|
#define TRXDMA_STATUS 0x0156 //
|
||
|
|
||
|
//
|
||
|
// 6. Adaptive Control Registers (Offset: 0x0160 - 0x01CF)
|
||
|
//
|
||
|
#define INIMCS_SEL 0x0160 // Init MCSrate for 32 MACID 0x160-17f
|
||
|
#define TX_RATE_REG INIMCS_SEL //Current Tx rate register
|
||
|
#define INIRTSMCS_SEL 0x0180 // Init RTSMCSrate
|
||
|
#define RRSR 0x0181 // Response rate setting.
|
||
|
#define ARFR0 0x0184 // Auto Rate Fallback 0 Register.
|
||
|
#define ARFR1 0x0188 //
|
||
|
#define ARFR2 0x018C //
|
||
|
#define ARFR3 0x0190 //
|
||
|
#define ARFR4 0x0194 //
|
||
|
#define ARFR5 0x0198 //
|
||
|
#define ARFR6 0x019C //
|
||
|
#define ARFR7 0x01A0 //
|
||
|
#define AGGLEN_LMT_H 0x01A7 // Aggregation Length Limit for High-MCS
|
||
|
#define AGGLEN_LMT_L 0x01A8 // Aggregation Length Limit for Low-MCS.
|
||
|
#define DARFRC 0x01B0 // Data Auto Rate Fallback Retry Count.
|
||
|
#define RARFRC 0x01B8 // Response Auto Rate Fallback Count.
|
||
|
#define MCS_TXAGC 0x01C0
|
||
|
#define CCK_TXAGC 0x01C8
|
||
|
|
||
|
//
|
||
|
// 7. EDCA Setting Registers (Offset: 0x01D0 - 0x01FF)
|
||
|
//
|
||
|
#define EDCAPARA_VO 0x01D0 // EDCA Parameter Register for VO queue.
|
||
|
#define EDCAPARA_VI 0x01D4 // EDCA Parameter Register for VI queue.
|
||
|
#define EDCAPARA_BE 0x01D8 // EDCA Parameter Register for BE queue.
|
||
|
#define EDCAPARA_BK 0x01DC // EDCA Parameter Register for BK queue.
|
||
|
#define BCNTCFG 0x01E0 // Beacon Time Configuration Register.
|
||
|
#define CWRR 0x01E2 // Contention Window Report Register.
|
||
|
#define ACMAVG 0x01E4 // ACM Average Register.
|
||
|
#define AcmHwCtrl 0x01E7
|
||
|
#define VO_ADMTM 0x01E8 // Admission Time Register.
|
||
|
#define VI_ADMTM 0x01EC
|
||
|
#define BE_ADMTM 0x01F0
|
||
|
#define RETRY_LIMIT 0x01F4 // Retry Limit Registers[15:8]-short, [7:0]-long
|
||
|
#define SG_RATE 0x01F6 // Max MCS Rate Available Register, which we Set the hightst SG rate.
|
||
|
|
||
|
//
|
||
|
// 8. WMAC, BA and CCX related Register. (Offset: 0x0200 - 0x023F)
|
||
|
//
|
||
|
#define NAV_CTRL 0x0200
|
||
|
#define BW_OPMODE 0x0203
|
||
|
#define BACAMCMD 0x0204
|
||
|
#define BACAMCONTENT 0x0208 // Block ACK CAM R/W Register.
|
||
|
|
||
|
// Roger had defined the 0x2xx register WMAC definition
|
||
|
#define LBDLY 0x0210 // Loopback Delay Register.
|
||
|
#define FWDLY 0x0211 // FW Delay Register.
|
||
|
#define HWPC_RX_CTRL 0x0218 // HW Packet Conversion RX Control Reg
|
||
|
#define MQIR 0x0220 // Mesh Qos Type Indication Register.
|
||
|
#define MAIR 0x0222 // Mesh ACK.
|
||
|
#define MSIR 0x0224 // Mesh HW Security Requirement Indication Reg
|
||
|
#define CLM_RESULT 0x0227 // CCA Busy Fraction(Channel Load)
|
||
|
#define NHM_RPI_CNT 0x0228 // Noise Histogram Measurement (NHM) RPI Report.
|
||
|
#define RXERR_RPT 0x0230 // Rx Error Report.
|
||
|
#define NAV_PROT_LEN 0x0234 // NAV Protection Length.
|
||
|
#define CFEND_TH 0x0236 // CF-End Threshold.
|
||
|
#define AMPDU_MIN_SPACE 0x0237 // AMPDU Min Space.
|
||
|
#define TXOP_STALL_CTRL 0x0238
|
||
|
|
||
|
//
|
||
|
// 9. Security Control Registers (Offset: 0x0240 - 0x025F)
|
||
|
//
|
||
|
#define RWCAM 0x0240 //IN 8190 Data Sheet is called CAMcmd
|
||
|
#define WCAMI 0x0244 // Software write CAM input content
|
||
|
#define RCAMO 0x0248 // Software read/write CAM config
|
||
|
#define CAMDBG 0x024C
|
||
|
#define SECR 0x0250 //Security Configuration Register
|
||
|
|
||
|
//
|
||
|
// 10. Power Save Control Registers (Offset: 0x0260 - 0x02DF)
|
||
|
//
|
||
|
#define WOW_CTRL 0x0260 //Wake On WLAN Control.
|
||
|
#define PSSTATUS 0x0261 // Power Save Status.
|
||
|
#define PSSWITCH 0x0262 // Power Save Switch.
|
||
|
#define MIMOPS_WAIT_PERIOD 0x0263
|
||
|
#define LPNAV_CTRL 0x0264
|
||
|
#define WFM0 0x0270 // Wakeup Frame Mask.
|
||
|
#define WFM1 0x0280 //
|
||
|
#define WFM2 0x0290 //
|
||
|
#define WFM3 0x02A0 //
|
||
|
#define WFM4 0x02B0 //
|
||
|
#define WFM5 0x02C0 // FW Control register.
|
||
|
#define WFCRC 0x02D0 // Wakeup Frame CRC.
|
||
|
#define RPWM 0x02DC // Host Request Power Mode.
|
||
|
#define CPWM 0x02DD // Current Power Mode.
|
||
|
#define FW_RPT_REG 0x02c4
|
||
|
|
||
|
//
|
||
|
// 11. General Purpose Registers (Offset: 0x02E0 - 0x02FF)
|
||
|
//
|
||
|
#define PSTIME 0x02E0 // Power Save Timer Register
|
||
|
#define TIMER0 0x02E4 //
|
||
|
#define TIMER1 0x02E8 //
|
||
|
#define GPIO_CTRL 0x02EC // GPIO Control Register
|
||
|
#define GPIO_IN 0x02EC // GPIO pins input value
|
||
|
#define GPIO_OUT 0x02ED // GPIO pins output value
|
||
|
#define GPIO_IO_SEL 0x02EE // GPIO pins output enable when a bit is set to "1"; otherwise, input is configured.
|
||
|
#define GPIO_MOD 0x02EF //
|
||
|
#define GPIO_INTCTRL 0x02F0 // GPIO Interrupt Control Register[7:0]
|
||
|
#define MAC_PINMUX_CFG 0x02F1 // MAC PINMUX Configuration Reg[7:0]
|
||
|
#define LEDCFG 0x02F2 // System PINMUX Configuration Reg[7:0]
|
||
|
#define PHY_REG 0x02F3 // RPT: PHY REG Access Report Reg[7:0]
|
||
|
#define PHY_REG_DATA 0x02F4 // PHY REG Read DATA Register [31:0]
|
||
|
#define EFUSE_CLK 0x02F8 // CTRL: E-FUSE Clock Control Reg[7:0]
|
||
|
//#define GPIO_INTCTRL 0x02F9 // GPIO Interrupt Control Register[7:0]
|
||
|
|
||
|
//
|
||
|
// 12. Host Interrupt Status Registers (Offset: 0x0300 - 0x030F)
|
||
|
//
|
||
|
#define IMR 0x0300 // Interrupt Mask Register
|
||
|
#define ISR 0x0308 // Interrupt Status Register
|
||
|
|
||
|
//
|
||
|
// 13. Test Mode and Debug Control Registers (Offset: 0x0310 - 0x034F)
|
||
|
//
|
||
|
#define DBG_PORT_SWITCH 0x003A
|
||
|
#define BIST 0x0310 // Bist reg definition
|
||
|
#define DBS 0x0314 // Debug Select ???
|
||
|
#define CPUINST 0x0318 // CPU Instruction Read Register
|
||
|
#define CPUCAUSE 0x031C // CPU Cause Register
|
||
|
#define LBUS_ERR_ADDR 0x0320 // Lexra Bus Error Address Register
|
||
|
#define LBUS_ERR_CMD 0x0324 // Lexra Bus Error Command Register
|
||
|
#define LBUS_ERR_DATA_L 0x0328 // Lexra Bus Error Data Low DW Register
|
||
|
#define LBUS_ERR_DATA_H 0x032C //
|
||
|
#define LX_EXCEPTION_ADDR 0x0330 // Lexra Bus Exception Address Register
|
||
|
#define WDG_CTRL 0x0334 // Watch Dog Control Register
|
||
|
#define INTMTU 0x0338 // Interrupt Mitigation Time Unit Reg
|
||
|
#define INTM 0x033A // Interrupt Mitigation Register
|
||
|
#define FDLOCKTURN0 0x033C // FW/DRV Lock Turn 0 Register
|
||
|
#define FDLOCKTURN1 0x033D // FW/DRV Lock Turn 1 Register
|
||
|
#define TRXPKTBUF_DBG_DATA 0x0340 // TRX Packet Buffer Debug Data Register
|
||
|
#define TRXPKTBUF_DBG_CTRL 0x0348 // TRX Packet Buffer Debug Control Reg
|
||
|
#define DPLL 0x034A // DPLL Monitor Register [15:0]
|
||
|
#define CBUS_ERR_ADDR 0x0350 // CPU Bus Error Address Register
|
||
|
#define CBUS_ERR_CMD 0x0354 // CPU Bus Error Command Register
|
||
|
#define CBUS_ERR_DATA_L 0x0358 // CPU Bus Error Data Low DW Register
|
||
|
#define CBUS_ERR_DATA_H 0x035C //
|
||
|
#define USB_SIE_INTF_ADDR 0x0360 // USB SIE Access Interface Address Reg
|
||
|
#define USB_SIE_INTF_WD 0x0361 // USB SIE Access Interface WData Reg
|
||
|
#define USB_SIE_INTF_RD 0x0362 // USB SIE Access Interface RData Reg
|
||
|
#define USB_SIE_INTF_CTRL 0x0363 // USB SIE Access Interface Control Reg
|
||
|
|
||
|
// Boundary is 0x37F
|
||
|
|
||
|
//
|
||
|
// 14. PCIE config register (Offset 0x500-)
|
||
|
//
|
||
|
#define TPPoll 0x0500 // Transmit Polling
|
||
|
#define PM_CTRL 0x0502 // PCIE power management control Register
|
||
|
#define PCIF 0x0503 // PCI Function Register 0x0009h~0x000bh
|
||
|
|
||
|
#define THPDA 0x0514 // Transmit High Priority Desc Addr
|
||
|
#define TMDA 0x0518 // Transmit Management Desc Addr
|
||
|
#define TCDA 0x051C // Transmit Command Desc Addr
|
||
|
#define HDA 0x0520 // HCCA Desc Addr
|
||
|
#define TVODA 0x0524 // Transmit VO Desc Addr
|
||
|
#define TVIDA 0x0528 // Transmit VI Desc Addr
|
||
|
#define TBEDA 0x052C // Transmit BE Desc Addr
|
||
|
#define TBKDA 0x0530 // Transmit BK Desc Addr
|
||
|
#define TBDA 0x0534 // Transmit Beacon Desc Addr
|
||
|
#define RCDA 0x0538 // Receive Command Desc Addr
|
||
|
#define RDSA 0x053C // Receive Desc Starting Addr
|
||
|
#define DBI_WDATA 0x0540 // DBI write data Register
|
||
|
#define DBI_RDATA 0x0544 // DBI read data Register
|
||
|
#define DBI_CTRL 0x0548 // PCIE DBI control Register
|
||
|
#define MDIO_DATA 0x0550 // PCIE MDIO data Register
|
||
|
#define MDIO_CTRL 0x0554 // PCIE MDIO control Register
|
||
|
#define PCI_RPWM 0x0561 // PCIE RPWM register
|
||
|
#define PCI_CPWM 0x0563 // Current Power Mode.
|
||
|
|
||
|
//
|
||
|
// Config register (Offset 0x800-)
|
||
|
//
|
||
|
#define PHY_CCA 0x803 // CCA related register
|
||
|
|
||
|
//============================================================================
|
||
|
// 8192S USB specific Regsiter Offset and Content definition,
|
||
|
// 2008.08.28, added by Roger.
|
||
|
//============================================================================
|
||
|
// Rx Aggregation time-out reg.
|
||
|
#define USB_RX_AGG_TIMEOUT 0xFE5B
|
||
|
|
||
|
// Firware reserved Tx page control.
|
||
|
#define FW_OFFLOAD_EN BIT7
|
||
|
|
||
|
// Min Spacing related settings.
|
||
|
#define MAX_MSS_DENSITY 0x13
|
||
|
#define MAX_MSS_DENSITY_2T 0x13
|
||
|
#define MAX_MSS_DENSITY_1T 0x0A
|
||
|
|
||
|
// Rx DMA Control related settings
|
||
|
#define RXDMA_AGG_EN BIT7
|
||
|
|
||
|
// USB Rx Aggregation TimeOut settings
|
||
|
#define RXDMA_AGG_TIMEOUT_DISABLE 0x00
|
||
|
#define RXDMA_AGG_TIMEOUT_17MS 0x01
|
||
|
#define RXDMA_AGG_TIMEOUT_17_2_MS 0x02
|
||
|
#define RXDMA_AGG_TIMEOUT_17_4_MS 0x04
|
||
|
#define RXDMA_AGG_TIMEOUT_17_10_MS 0x0A
|
||
|
// USB RPWM register
|
||
|
#define USB_RPWM 0xFE58
|
||
|
|
||
|
//FIXLZM SVN_BRACH NOT MOD HERE, IF MOD RX IS LITTLE LOW
|
||
|
//#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==PCI_INTERFACE))
|
||
|
//#define RPWM PCI_RPWM
|
||
|
//#elif ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE))
|
||
|
//#define RPWM USB_RPWM
|
||
|
//#endif
|
||
|
|
||
|
|
||
|
//============================================================================
|
||
|
// 8190 Regsiter offset definition
|
||
|
//============================================================================
|
||
|
#if 1 // Delete the register later
|
||
|
#define AFR 0x010 // AutoLoad Function Register
|
||
|
#define BCN_TCFG 0x062 // Beacon Time Configuration
|
||
|
#define RATR0 0x320 // Rate Adaptive Table register1
|
||
|
#endif
|
||
|
// TODO: Remove unused register, We must declare backward compatiable
|
||
|
//Undefined register set in 8192S. 0x320/350 DW is useless
|
||
|
#define UnusedRegister 0x0320
|
||
|
#define PSR UnusedRegister // Page Select Register
|
||
|
//Security Related
|
||
|
#define DCAM UnusedRegister // Debug CAM Interface
|
||
|
//PHY Configuration related
|
||
|
#define BBAddr UnusedRegister // Phy register address register
|
||
|
#define PhyDataR UnusedRegister // Phy register data read
|
||
|
#define UFWP UnusedRegister
|
||
|
|
||
|
|
||
|
//============================================================================
|
||
|
// 8192S Regsiter Bit and Content definition
|
||
|
//============================================================================
|
||
|
|
||
|
//
|
||
|
// 1. System Configuration Registers (Offset: 0x0000 - 0x003F)
|
||
|
//
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S SYS_ISO_CTRL bits (Offset 0x0, 16bit)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define ISO_MD2PP BIT0 // MACTOP/BB/PCIe Digital to Power On.
|
||
|
#define ISO_PA2PCIE BIT3 // PCIe Analog 1.2V to PCIe 3.3V
|
||
|
#define ISO_PLL2MD BIT4 // AFE PLL to MACTOP/BB/PCIe Digital.
|
||
|
#define ISO_PWC_DV2RP BIT11 // Digital Vdd to Retention Path
|
||
|
#define ISO_PWC_RV2RP BIT12 // LPLDOR12 to Retenrion Path, 1: isolation, 0: attach.
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S SYS_FUNC_EN bits (Offset 0x2, 16bit)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define FEN_MREGEN BIT15 // MAC I/O Registers Enable.
|
||
|
#define FEN_DCORE BIT11 // Enable Core Digital.
|
||
|
#define FEN_CPUEN BIT10 // Enable CPU Core Digital.
|
||
|
// 8192S PMC_FSM bits (Offset 0x4, 32bit)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define PAD_HWPD_IDN BIT22 // HWPDN PAD status Indicator
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S SYS_CLKR bits (Offset 0x8, 16bit)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define SYS_CLKSEL_80M BIT0 // System Clock 80MHz
|
||
|
#define SYS_PS_CLKSEL BIT1 //System power save clock select.
|
||
|
#define SYS_CPU_CLKSEL BIT2 // System Clock select, 1: AFE source, 0: System clock(L-Bus)
|
||
|
#define SYS_MAC_CLK_EN BIT11 // MAC Clock Enable.
|
||
|
#define SYS_SWHW_SEL BIT14 // Load done, control path seitch.
|
||
|
#define SYS_FWHW_SEL BIT15 // Sleep exit, control path swith.
|
||
|
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S Cmd9346CR bits (Offset 0xA, 16bit)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define CmdEEPROM_En BIT5 // EEPROM enable when set 1
|
||
|
#define CmdEERPOMSEL BIT4 // System EEPROM select, 0: boot from E-FUSE, 1: The EEPROM used is 9346
|
||
|
#define Cmd9346CR_9356SEL BIT4
|
||
|
#define AutoLoadEEPROM (CmdEEPROM_En|CmdEERPOMSEL)
|
||
|
#define AutoLoadEFUSE CmdEEPROM_En
|
||
|
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S AFE_MISC bits AFE Misc (Offset 0x10, 8bits)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define AFE_MBEN BIT1 // Enable AFE Macro Block's Mbias.
|
||
|
#define AFE_BGEN BIT0 // Enable AFE Macro Block's Bandgap.
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S SPS1_CTRL bits (Offset 0x18-1E, 56bits)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define SPS1_SWEN BIT1 // Enable vsps18 SW Macro Block.
|
||
|
#define SPS1_LDEN BIT0 // Enable VSPS12 LDO Macro block.
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S RF_CTRL bits (Offset 0x1F, 8bits)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define RF_EN BIT0 // Enable RF module.
|
||
|
#define RF_RSTB BIT1 // Reset RF module.
|
||
|
#define RF_SDMRSTB BIT2 // Reset RF SDM module.
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S LDOA15_CTRL bits (Offset 0x20, 8bits)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define LDA15_EN BIT0 // Enable LDOA15 Macro Block
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S LDOV12D_CTRL bits (Offset 0x21, 8bits)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define LDV12_EN BIT0 // Enable LDOVD12 Macro Block
|
||
|
#define LDV12_SDBY BIT1 // LDOVD12 standby mode
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S AFE_XTAL_CTRL bits AFE Crystal Control. (Offset 0x26,16bits)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define XTAL_GATE_AFE BIT10
|
||
|
// Gated Control. 1: AFE Clock source gated, 0: Clock enable.
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S AFE_PLL_CTRL bits System Function Enable (Offset 0x28,64bits)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define APLL_EN BIT0 // Enable AFE PLL Macro Block.
|
||
|
|
||
|
// Find which card bus type
|
||
|
#define AFR_CardBEn BIT0
|
||
|
#define AFR_CLKRUN_SEL BIT1
|
||
|
#define AFR_FuncRegEn BIT2
|
||
|
|
||
|
//
|
||
|
// 2. Command Control Registers (Offset: 0x0040 - 0x004F)
|
||
|
//
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S (CMD) command register bits (Offset 0x40, 16 bits)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define APSDOFF_STATUS BIT15 //
|
||
|
#define APSDOFF BIT14 //
|
||
|
#define BBRSTn BIT13 //Enable OFDM/CCK
|
||
|
#define BB_GLB_RSTn BIT12 //Enable BB
|
||
|
#define SCHEDULE_EN BIT10 //Enable MAC scheduler
|
||
|
#define MACRXEN BIT9 //
|
||
|
#define MACTXEN BIT8 //
|
||
|
#define DDMA_EN BIT7 //FW off load function enable
|
||
|
#define FW2HW_EN BIT6 //MAC every module reset as below
|
||
|
#define RXDMA_EN BIT5 //
|
||
|
#define TXDMA_EN BIT4 //
|
||
|
#define HCI_RXDMA_EN BIT3 //
|
||
|
#define HCI_TXDMA_EN BIT2 //
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S (TXPAUSE) transmission pause (Offset 0x42, 8 bits)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define StopHCCA BIT6
|
||
|
#define StopHigh BIT5
|
||
|
#define StopMgt BIT4
|
||
|
#define StopVO BIT3
|
||
|
#define StopVI BIT2
|
||
|
#define StopBE BIT1
|
||
|
#define StopBK BIT0
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S (LBKMD) LoopBack Mode Select (Offset 0x43, 8 bits)
|
||
|
//----------------------------------------------------------------------------
|
||
|
//
|
||
|
// [3] no buffer, 1: no delay, 0: delay; [2] dmalbk, [1] no_txphy, [0] diglbk.
|
||
|
// 0000: Normal
|
||
|
// 1011: MAC loopback (involving CPU)
|
||
|
// 0011: MAC Delay Loopback
|
||
|
// 0001: PHY loopback (not yet implemented)
|
||
|
// 0111: DMA loopback (only uses TxPktBuffer and DMA engine)
|
||
|
// All other combinations are reserved.
|
||
|
// Default: 0000b.
|
||
|
//
|
||
|
#define LBK_NORMAL 0x00
|
||
|
#define LBK_MAC_LB (BIT0|BIT1|BIT3)
|
||
|
#define LBK_MAC_DLB (BIT0|BIT1)
|
||
|
#define LBK_DMA_LB (BIT0|BIT1|BIT2)
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S (TCR) transmission Configuration Register (Offset 0x44, 32 bits)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define TCP_OFDL_EN BIT25 //For CE packet conversion
|
||
|
#define HWPC_TX_EN BIT24 //""
|
||
|
#define TXDMAPRE2FULL BIT23 //TXDMA enable pre2full sync
|
||
|
#define DISCW BIT20 //CW disable
|
||
|
#define TCRICV BIT19 //Append ICV or not
|
||
|
#define CfendForm BIT17 //AP mode
|
||
|
#define TCRCRC BIT16 //Append CRC32
|
||
|
#define FAKE_IMEM_EN BIT15 //
|
||
|
#define TSFRST BIT9 //
|
||
|
#define TSFEN BIT8 //
|
||
|
// For TCR FW download ready --> write by FW Bit0-7 must all one
|
||
|
#define FWALLRDY (BIT0|BIT1|BIT2|BIT3|BIT4|BIT5|BIT6|BIT7)
|
||
|
#define FWRDY BIT7
|
||
|
#define BASECHG BIT6
|
||
|
#define IMEM BIT5
|
||
|
#define DMEM_CODE_DONE BIT4
|
||
|
#define EXT_IMEM_CHK_RPT BIT3
|
||
|
#define EXT_IMEM_CODE_DONE BIT2
|
||
|
#define IMEM_CHK_RPT BIT1
|
||
|
#define IMEM_CODE_DONE BIT0
|
||
|
// Copy fomr 92SU definition
|
||
|
#define IMEM_CODE_DONE BIT0
|
||
|
#define IMEM_CHK_RPT BIT1
|
||
|
#define EMEM_CODE_DONE BIT2
|
||
|
#define EMEM_CHK_RPT BIT3
|
||
|
#define DMEM_CODE_DONE BIT4
|
||
|
#define IMEM_RDY BIT5
|
||
|
#define BASECHG BIT6
|
||
|
#define FWRDY BIT7
|
||
|
#define LOAD_FW_READY (IMEM_CODE_DONE|IMEM_CHK_RPT|EMEM_CODE_DONE|\
|
||
|
EMEM_CHK_RPT|DMEM_CODE_DONE|IMEM_RDY|BASECHG|\
|
||
|
FWRDY)
|
||
|
#define TCR_TSFEN BIT8 // TSF function on or off.
|
||
|
#define TCR_TSFRST BIT9 // Reset TSF function to zero.
|
||
|
#define TCR_FAKE_IMEM_EN BIT15
|
||
|
#define TCR_CRC BIT16
|
||
|
#define TCR_ICV BIT19 // Integrity Check Value.
|
||
|
#define TCR_DISCW BIT20 // Disable Contention Windows Backoff.
|
||
|
#define TCR_HWPC_TX_EN BIT24
|
||
|
#define TCR_TCP_OFDL_EN BIT25
|
||
|
#define TXDMA_INIT_VALUE (IMEM_CHK_RPT|EXT_IMEM_CHK_RPT)
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S (RCR) Receive Configuration Register (Offset 0x48, 32 bits)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define RCR_APPFCS BIT31 //WMAC append FCS after pauload
|
||
|
#define RCR_DIS_ENC_2BYTE BIT30 //HW encrypt 2 or 1 byte mode
|
||
|
#define RCR_DIS_AES_2BYTE BIT29 //
|
||
|
#define RCR_HTC_LOC_CTRL BIT28 //MFC<--HTC=1 MFC-->HTC=0
|
||
|
#define RCR_ENMBID BIT27 //Enable Multiple BssId.
|
||
|
#define RCR_RX_TCPOFDL_EN BIT26 //
|
||
|
#define RCR_APP_PHYST_RXFF BIT25 //
|
||
|
#define RCR_APP_PHYST_STAFF BIT24 //
|
||
|
#define RCR_CBSSID BIT23 //Accept BSSID match packet
|
||
|
#define RCR_APWRMGT BIT22 //Accept power management packet
|
||
|
#define RCR_ADD3 BIT21 //Accept address 3 match packet
|
||
|
#define RCR_AMF BIT20 //Accept management type frame
|
||
|
#define RCR_ACF BIT19 //Accept control type frame
|
||
|
#define RCR_ADF BIT18 //Accept data type frame
|
||
|
#define RCR_APP_MIC BIT17 //
|
||
|
#define RCR_APP_ICV BIT16 //
|
||
|
#define RCR_RXFTH BIT13 //Rx FIFO Threshold Bot 13 - 15
|
||
|
#define RCR_AICV BIT12 //Accept ICV error packet
|
||
|
#define RCR_RXDESC_LK_EN BIT11 //Accept to update rx desc length
|
||
|
#define RCR_APP_BA_SSN BIT6 //Accept BA SSN
|
||
|
#define RCR_ACRC32 BIT5 //Accept CRC32 error packet
|
||
|
#define RCR_RXSHFT_EN BIT4 //Accept broadcast packet
|
||
|
#define RCR_AB BIT3 //Accept broadcast packet
|
||
|
#define RCR_AM BIT2 //Accept multicast packet
|
||
|
#define RCR_APM BIT1 //Accept physical match packet
|
||
|
#define RCR_AAP BIT0 //Accept all unicast packet
|
||
|
#define RCR_MXDMA_OFFSET 8
|
||
|
#define RCR_FIFO_OFFSET 13
|
||
|
|
||
|
//in 92U FIXLZM
|
||
|
//#ifdef RTL8192U
|
||
|
#define RCR_ONLYERLPKT BIT31 // Early Receiving based on Packet Size.
|
||
|
#define RCR_ENCS2 BIT30 // Enable Carrier Sense Detection Method 2
|
||
|
#define RCR_ENCS1 BIT29 // Enable Carrier Sense Detection Method 1
|
||
|
#define RCR_ACKTXBW (BIT24|BIT25) // TXBW Setting of ACK frames
|
||
|
//#endif
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S (MSR) Media Status Register (Offset 0x4C, 8 bits)
|
||
|
//----------------------------------------------------------------------------
|
||
|
/*
|
||
|
Network Type
|
||
|
00: No link
|
||
|
01: Link in ad hoc network
|
||
|
10: Link in infrastructure network
|
||
|
11: AP mode
|
||
|
Default: 00b.
|
||
|
*/
|
||
|
#define MSR_NOLINK 0x00
|
||
|
#define MSR_ADHOC 0x01
|
||
|
#define MSR_INFRA 0x02
|
||
|
#define MSR_AP 0x03
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S (SYSF_CFG) system Fucntion Config Reg (Offset 0x4D, 8 bits)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define ENUART BIT7
|
||
|
#define ENJTAG BIT3
|
||
|
#define BTMODE (BIT2|BIT1)
|
||
|
#define ENBT BIT0
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S (MBIDCTRL) MBSSID Control Register (Offset 0x4F, 8 bits)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define ENMBID BIT7
|
||
|
#define BCNUM (BIT6|BIT5|BIT4)
|
||
|
|
||
|
//
|
||
|
// 3. MACID Setting Registers (Offset: 0x0050 - 0x007F)
|
||
|
//
|
||
|
|
||
|
//
|
||
|
// 4. Timing Control Registers (Offset: 0x0080 - 0x009F)
|
||
|
//
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S (USTIME) US Time Tunning Register (Offset 0x8A, 16 bits)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define USTIME_EDCA 0xFF00
|
||
|
#define USTIME_TSF 0x00FF
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S (SIFS_CCK/OFDM) US Time Tunning Register (Offset 0x8C/8E,16 bits)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define SIFS_TRX 0xFF00
|
||
|
#define SIFS_CTX 0x00FF
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S (DRVERLYINT) Driver Early Interrupt Reg (Offset 0x98, 16bit)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define ENSWBCN BIT15
|
||
|
#define DRVERLY_TU 0x0FF0
|
||
|
#define DRVERLY_US 0x000F
|
||
|
#define BCN_TCFG_CW_SHIFT 8
|
||
|
#define BCN_TCFG_IFS 0
|
||
|
|
||
|
//
|
||
|
// 5. FIFO Control Registers (Offset: 0x00A0 - 0x015F)
|
||
|
//
|
||
|
|
||
|
//
|
||
|
// 6. Adaptive Control Registers (Offset: 0x0160 - 0x01CF)
|
||
|
//
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S Response Rate Set Register (offset 0x181, 24bits)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define RRSR_RSC_OFFSET 21
|
||
|
#define RRSR_SHORT_OFFSET 23
|
||
|
#define RRSR_RSC_BW_40M 0x600000
|
||
|
#define RRSR_RSC_UPSUBCHNL 0x400000
|
||
|
#define RRSR_RSC_LOWSUBCHNL 0x200000
|
||
|
#define RRSR_SHORT 0x800000
|
||
|
#define RRSR_1M BIT0
|
||
|
#define RRSR_2M BIT1
|
||
|
#define RRSR_5_5M BIT2
|
||
|
#define RRSR_11M BIT3
|
||
|
#define RRSR_6M BIT4
|
||
|
#define RRSR_9M BIT5
|
||
|
#define RRSR_12M BIT6
|
||
|
#define RRSR_18M BIT7
|
||
|
#define RRSR_24M BIT8
|
||
|
#define RRSR_36M BIT9
|
||
|
#define RRSR_48M BIT10
|
||
|
#define RRSR_54M BIT11
|
||
|
#define RRSR_MCS0 BIT12
|
||
|
#define RRSR_MCS1 BIT13
|
||
|
#define RRSR_MCS2 BIT14
|
||
|
#define RRSR_MCS3 BIT15
|
||
|
#define RRSR_MCS4 BIT16
|
||
|
#define RRSR_MCS5 BIT17
|
||
|
#define RRSR_MCS6 BIT18
|
||
|
#define RRSR_MCS7 BIT19
|
||
|
#define BRSR_AckShortPmb BIT23
|
||
|
|
||
|
#define RRSR_RSC_UPSUBCHANL 0x200000
|
||
|
// CCK ACK: use Short Preamble or not
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S Rate Definition
|
||
|
//----------------------------------------------------------------------------
|
||
|
//CCK
|
||
|
#define RATR_1M 0x00000001
|
||
|
#define RATR_2M 0x00000002
|
||
|
#define RATR_55M 0x00000004
|
||
|
#define RATR_11M 0x00000008
|
||
|
//OFDM
|
||
|
#define RATR_6M 0x00000010
|
||
|
#define RATR_9M 0x00000020
|
||
|
#define RATR_12M 0x00000040
|
||
|
#define RATR_18M 0x00000080
|
||
|
#define RATR_24M 0x00000100
|
||
|
#define RATR_36M 0x00000200
|
||
|
#define RATR_48M 0x00000400
|
||
|
#define RATR_54M 0x00000800
|
||
|
//MCS 1 Spatial Stream
|
||
|
#define RATR_MCS0 0x00001000
|
||
|
#define RATR_MCS1 0x00002000
|
||
|
#define RATR_MCS2 0x00004000
|
||
|
#define RATR_MCS3 0x00008000
|
||
|
#define RATR_MCS4 0x00010000
|
||
|
#define RATR_MCS5 0x00020000
|
||
|
#define RATR_MCS6 0x00040000
|
||
|
#define RATR_MCS7 0x00080000
|
||
|
//MCS 2 Spatial Stream
|
||
|
#define RATR_MCS8 0x00100000
|
||
|
#define RATR_MCS9 0x00200000
|
||
|
#define RATR_MCS10 0x00400000
|
||
|
#define RATR_MCS11 0x00800000
|
||
|
#define RATR_MCS12 0x01000000
|
||
|
#define RATR_MCS13 0x02000000
|
||
|
#define RATR_MCS14 0x04000000
|
||
|
#define RATR_MCS15 0x08000000
|
||
|
// ALL CCK Rate
|
||
|
#define RATE_ALL_CCK RATR_1M|RATR_2M|RATR_55M|RATR_11M
|
||
|
#define RATE_ALL_OFDM_AG RATR_6M|RATR_9M|RATR_12M|RATR_18M|RATR_24M|\
|
||
|
RATR_36M|RATR_48M|RATR_54M
|
||
|
#define RATE_ALL_OFDM_1SS RATR_MCS0|RATR_MCS1|RATR_MCS2|RATR_MCS3 |\
|
||
|
RATR_MCS4|RATR_MCS5|RATR_MCS6 |RATR_MCS7
|
||
|
#define RATE_ALL_OFDM_2SS RATR_MCS8|RATR_MCS9 |RATR_MCS10|RATR_MCS11|\
|
||
|
RATR_MCS12|RATR_MCS13|RATR_MCS14|RATR_MCS15
|
||
|
|
||
|
//
|
||
|
// 7. EDCA Setting Registers (Offset: 0x01D0 - 0x01FF)
|
||
|
//
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S EDCA Setting (offset 0x1D0-1DF, 4DW VO/VI/BE/BK)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define AC_PARAM_TXOP_LIMIT_OFFSET 16
|
||
|
#define AC_PARAM_ECW_MAX_OFFSET 12
|
||
|
#define AC_PARAM_ECW_MIN_OFFSET 8
|
||
|
#define AC_PARAM_AIFS_OFFSET 0
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S AcmHwCtrl bits (offset 0x1E7, 1 byte)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define AcmHw_HwEn BIT0
|
||
|
#define AcmHw_BeqEn BIT1
|
||
|
#define AcmHw_ViqEn BIT2
|
||
|
#define AcmHw_VoqEn BIT3
|
||
|
#define AcmHw_BeqStatus BIT4
|
||
|
#define AcmHw_ViqStatus BIT5
|
||
|
#define AcmHw_VoqStatus BIT6
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S Retry Limit (Offset 0x1F4, 16bit)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define RETRY_LIMIT_SHORT_SHIFT 8
|
||
|
#define RETRY_LIMIT_LONG_SHIFT 0
|
||
|
|
||
|
//
|
||
|
// 8. WMAC, BA and CCX related Register. (Offset: 0x0200 - 0x023F)
|
||
|
//
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S NAV_CTRL bits (Offset 0x200, 24bit)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define NAV_UPPER_EN BIT16
|
||
|
#define NAV_UPPER 0xFF00
|
||
|
#define NAV_RTSRST 0xFF
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S BW_OPMODE bits (Offset 0x203, 8bit)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define BW_OPMODE_20MHZ BIT2
|
||
|
#define BW_OPMODE_5G BIT1
|
||
|
#define BW_OPMODE_11J BIT0
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S BW_OPMODE bits (Offset 0x230, 4 Byte)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define RXERR_RPT_RST BIT27 // Write "one" to set the counter to zero.
|
||
|
// RXERR_RPT_SEL
|
||
|
#define RXERR_OFDM_PPDU 0
|
||
|
#define RXERR_OFDM_FALSE_ALARM 1
|
||
|
#define RXERR_OFDM_MPDU_OK 2
|
||
|
#define RXERR_OFDM_MPDU_FAIL 3
|
||
|
#define RXERR_CCK_PPDU 4
|
||
|
#define RXERR_CCK_FALSE_ALARM 5
|
||
|
#define RXERR_CCK_MPDU_OK 6
|
||
|
#define RXERR_CCK_MPDU_FAIL 7
|
||
|
#define RXERR_HT_PPDU 8
|
||
|
#define RXERR_HT_FALSE_ALARM 9
|
||
|
#define RXERR_HT_MPDU_TOTAL 10
|
||
|
#define RXERR_HT_MPDU_OK 11
|
||
|
#define RXERR_HT_MPDU_FAIL 12
|
||
|
#define RXERR_RX_FULL_DROP 15
|
||
|
|
||
|
//
|
||
|
// 9. Security Control Registers (Offset: 0x0240 - 0x025F)
|
||
|
//
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S RWCAM CAM Command Register (offset 0x240, 4 byte)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define CAM_CM_SecCAMPolling BIT31 //Security CAM Polling
|
||
|
#define CAM_CM_SecCAMClr BIT30 //Clear all bits in CAM
|
||
|
#define CAM_CM_SecCAMWE BIT16 //Security CAM enable
|
||
|
#define CAM_ADDR 0xFF //CAM Address Offset
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S CAMDBG Debug CAM Register (offset 0x24C, 4 byte)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define Dbg_CAM_TXSecCAMInfo BIT31 //Retrieve lastest Tx Info
|
||
|
#define Dbg_CAM_SecKeyFound BIT30 //Security KEY Found
|
||
|
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S SECR Security Configuration Register (offset 0x250, 1 byte)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define SCR_TxUseDK BIT0 //Force Tx Use Default Key
|
||
|
#define SCR_RxUseDK BIT1 //Force Rx Use Default Key
|
||
|
#define SCR_TxEncEnable BIT2 //Enable Tx Encryption
|
||
|
#define SCR_RxDecEnable BIT3 //Enable Rx Decryption
|
||
|
#define SCR_SKByA2 BIT4 //Search kEY BY A2
|
||
|
#define SCR_NoSKMC BIT5 //No Key Search Multicast
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S CAM Config Setting (offset 0x250, 1 byte)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define CAM_VALID BIT15
|
||
|
#define CAM_NOTVALID 0x0000
|
||
|
#define CAM_USEDK BIT5
|
||
|
|
||
|
#define CAM_NONE 0x0
|
||
|
#define CAM_WEP40 0x01
|
||
|
#define CAM_TKIP 0x02
|
||
|
#define CAM_AES 0x04
|
||
|
#define CAM_WEP104 0x05
|
||
|
|
||
|
#define TOTAL_CAM_ENTRY 32
|
||
|
|
||
|
#define CAM_CONFIG_USEDK TRUE
|
||
|
#define CAM_CONFIG_NO_USEDK FALSE
|
||
|
|
||
|
#define CAM_WRITE BIT16
|
||
|
#define CAM_READ 0x00000000
|
||
|
#define CAM_POLLINIG BIT31
|
||
|
|
||
|
#define SCR_UseDK 0x01
|
||
|
#define SCR_TxSecEnable 0x02
|
||
|
#define SCR_RxSecEnable 0x04
|
||
|
|
||
|
//
|
||
|
// 10. Power Save Control Registers (Offset: 0x0260 - 0x02DF)
|
||
|
//
|
||
|
#define WOW_PMEN BIT0 // Power management Enable.
|
||
|
#define WOW_WOMEN BIT1 // WoW function on or off.
|
||
|
#define WOW_MAGIC BIT2 // Magic packet
|
||
|
#define WOW_UWF BIT3 // Unicast Wakeup frame.
|
||
|
|
||
|
//
|
||
|
// 11. General Purpose Registers (Offset: 0x02E0 - 0x02FF)
|
||
|
// 8192S GPIO Config Setting (offset 0x2F1, 1 byte)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define GPIOMUX_EN BIT3 // When this bit is set to "1", GPIO PINs will switch to MAC GPIO Function
|
||
|
#define GPIOSEL_GPIO 0 // UART or JTAG or pure GPIO
|
||
|
#define GPIOSEL_PHYDBG 1 // PHYDBG
|
||
|
#define GPIOSEL_BT 2 // BT_coex
|
||
|
#define GPIOSEL_WLANDBG 3 // WLANDBG
|
||
|
#define GPIOSEL_GPIO_MASK ~(BIT0|BIT1)
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// PHY REG Access Report Register definition
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define HST_RDBUSY BIT0
|
||
|
#define CPU_WTBUSY BIT1
|
||
|
|
||
|
//
|
||
|
// 12. Host Interrupt Status Registers (Offset: 0x0300 - 0x030F)
|
||
|
//
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8190 IMR/ISR bits (offset 0xfd, 8bits)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define IMR8190_DISABLED 0x0
|
||
|
|
||
|
// IMR DW1 Bit 0-31
|
||
|
#define IMR_CPUERR BIT5 // CPU error interrupt
|
||
|
#define IMR_ATIMEND BIT4 // ATIM Window End Interrupt
|
||
|
#define IMR_TBDOK BIT3 // Transmit Beacon OK Interrupt
|
||
|
#define IMR_TBDER BIT2 // Transmit Beacon Error Interrupt
|
||
|
#define IMR_BCNDMAINT8 BIT1 // Beacon DMA Interrupt 8
|
||
|
#define IMR_BCNDMAINT7 BIT0 // Beacon DMA Interrupt 7
|
||
|
// IMR DW0 Bit 0-31
|
||
|
|
||
|
#define IMR_BCNDMAINT6 BIT31 // Beacon DMA Interrupt 6
|
||
|
#define IMR_BCNDMAINT5 BIT30 // Beacon DMA Interrupt 5
|
||
|
#define IMR_BCNDMAINT4 BIT29 // Beacon DMA Interrupt 4
|
||
|
#define IMR_BCNDMAINT3 BIT28 // Beacon DMA Interrupt 3
|
||
|
#define IMR_BCNDMAINT2 BIT27 // Beacon DMA Interrupt 2
|
||
|
#define IMR_BCNDMAINT1 BIT26 // Beacon DMA Interrupt 1
|
||
|
#define IMR_BCNDOK8 BIT25 // Beacon Queue DMA OK Interrup 8
|
||
|
#define IMR_BCNDOK7 BIT24 // Beacon Queue DMA OK Interrup 7
|
||
|
#define IMR_BCNDOK6 BIT23 // Beacon Queue DMA OK Interrup 6
|
||
|
#define IMR_BCNDOK5 BIT22 // Beacon Queue DMA OK Interrup 5
|
||
|
#define IMR_BCNDOK4 BIT21 // Beacon Queue DMA OK Interrup 4
|
||
|
#define IMR_BCNDOK3 BIT20 // Beacon Queue DMA OK Interrup 3
|
||
|
#define IMR_BCNDOK2 BIT19 // Beacon Queue DMA OK Interrup 2
|
||
|
#define IMR_BCNDOK1 BIT18 // Beacon Queue DMA OK Interrup 1
|
||
|
#define IMR_TIMEOUT2 BIT17 // Timeout interrupt 2
|
||
|
#define IMR_TIMEOUT1 BIT16 // Timeout interrupt 1
|
||
|
#define IMR_TXFOVW BIT15 // Transmit FIFO Overflow
|
||
|
#define IMR_PSTIMEOUT BIT14 // Power save time out interrupt
|
||
|
#define IMR_BcnInt BIT13 // Beacon DMA Interrupt 0
|
||
|
#define IMR_RXFOVW BIT12 // Receive FIFO Overflow
|
||
|
#define IMR_RDU BIT11 // Receive Descriptor Unavailable
|
||
|
#define IMR_RXCMDOK BIT10 // Receive Command Packet OK
|
||
|
#define IMR_BDOK BIT9 // Beacon Queue DMA OK Interrup
|
||
|
#define IMR_HIGHDOK BIT8 // High Queue DMA OK Interrupt
|
||
|
#define IMR_COMDOK BIT7 // Command Queue DMA OK Interrupt
|
||
|
#define IMR_MGNTDOK BIT6 // Management Queue DMA OK Interrupt
|
||
|
#define IMR_HCCADOK BIT5 // HCCA Queue DMA OK Interrupt
|
||
|
#define IMR_BKDOK BIT4 // AC_BK DMA OK Interrupt
|
||
|
#define IMR_BEDOK BIT3 // AC_BE DMA OK Interrupt
|
||
|
#define IMR_VIDOK BIT2 // AC_VI DMA OK Interrupt
|
||
|
#define IMR_VODOK BIT1 // AC_VO DMA Interrupt
|
||
|
#define IMR_ROK BIT0 // Receive DMA OK Interrupt
|
||
|
|
||
|
//
|
||
|
// 13. Test Mode and Debug Control Registers (Offset: 0x0310 - 0x034F)
|
||
|
//
|
||
|
|
||
|
//
|
||
|
// 14. PCIE config register (Offset 0x500-)
|
||
|
//
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8190 TPPool bits (offset 0xd9, 2 byte)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define TPPoll_BKQ BIT0 // BK queue polling
|
||
|
#define TPPoll_BEQ BIT1 // BE queue polling
|
||
|
#define TPPoll_VIQ BIT2 // VI queue polling
|
||
|
#define TPPoll_VOQ BIT3 // VO queue polling
|
||
|
#define TPPoll_BQ BIT4 // Beacon queue polling
|
||
|
#define TPPoll_CQ BIT5 // Command queue polling
|
||
|
#define TPPoll_MQ BIT6 // Management queue polling
|
||
|
#define TPPoll_HQ BIT7 // High queue polling
|
||
|
#define TPPoll_HCCAQ BIT8 // HCCA queue polling
|
||
|
#define TPPoll_StopBK BIT9 // Stop BK queue
|
||
|
#define TPPoll_StopBE BIT10 // Stop BE queue
|
||
|
#define TPPoll_StopVI BIT11 // Stop VI queue
|
||
|
#define TPPoll_StopVO BIT12 // Stop VO queue
|
||
|
#define TPPoll_StopMgt BIT13 // Stop Mgnt queue
|
||
|
#define TPPoll_StopHigh BIT14 // Stop High queue
|
||
|
#define TPPoll_StopHCCA BIT15 // Stop HCCA queue
|
||
|
#define TPPoll_SHIFT 8 // Queue ID mapping
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S PCIF (Offset 0x500, 32bit)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define MXDMA2_16bytes 0x000
|
||
|
#define MXDMA2_32bytes 0x001
|
||
|
#define MXDMA2_64bytes 0x010
|
||
|
#define MXDMA2_128bytes 0x011
|
||
|
#define MXDMA2_256bytes 0x100
|
||
|
#define MXDMA2_512bytes 0x101
|
||
|
#define MXDMA2_1024bytes 0x110
|
||
|
#define MXDMA2_NoLimit 0x7
|
||
|
|
||
|
#define MULRW_SHIFT 3
|
||
|
#define MXDMA2_RX_SHIFT 4
|
||
|
#define MXDMA2_TX_SHIFT 0
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8190 CCX_COMMAND_REG Setting (offset 0x25A, 1 byte)
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define CCX_CMD_CLM_ENABLE BIT0 // Enable Channel Load
|
||
|
#define CCX_CMD_NHM_ENABLE BIT1 // Enable Noise Histogram
|
||
|
#define CCX_CMD_FUNCTION_ENABLE BIT8
|
||
|
// CCX function (Channel Load/RPI/Noise Histogram).
|
||
|
#define CCX_CMD_IGNORE_CCA BIT9
|
||
|
// Treat CCA period as IDLE time for NHM.
|
||
|
#define CCX_CMD_IGNORE_TXON BIT10
|
||
|
// Treat TXON period as IDLE time for NHM.
|
||
|
#define CCX_CLM_RESULT_READY BIT16
|
||
|
// 1: Indicate the result of Channel Load is ready.
|
||
|
#define CCX_NHM_RESULT_READY BIT16
|
||
|
// 1: Indicate the result of Noise histogram is ready.
|
||
|
#define CCX_CMD_RESET 0x0
|
||
|
// Clear all the result of CCX measurement and disable the CCX function.
|
||
|
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S EFUSE
|
||
|
//----------------------------------------------------------------------------
|
||
|
//#define HWSET_MAX_SIZE_92S 128
|
||
|
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S EEPROM/EFUSE share register definition.
|
||
|
//----------------------------------------------------------------------------
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S EEROM and Compatible E-Fuse definition. Added by Roger, 2008.10.21.
|
||
|
//----------------------------------------------------------------------------
|
||
|
#define RTL8190_EEPROM_ID 0x8129
|
||
|
#define EEPROM_HPON 0x02 // LDO settings.
|
||
|
#define EEPROM_VID 0x08 // USB Vendor ID.
|
||
|
#define EEPROM_PID 0x0A // USB Product ID.
|
||
|
#define EEPROM_USB_OPTIONAL 0x0C // For optional function.
|
||
|
#define EEPROM_USB_PHY_PARA1 0x0D // For fine tune USB PHY.
|
||
|
#define EEPROM_NODE_ADDRESS_BYTE_0 0x12 // MAC address.
|
||
|
#define EEPROM_TxPowerDiff 0x1F
|
||
|
|
||
|
#define EEPROM_Version 0x50
|
||
|
#define EEPROM_ChannelPlan 0x51 // Map of supported channels.
|
||
|
#define EEPROM_CustomID 0x52
|
||
|
#define EEPROM_SubCustomID 0x53 // Reserved for customer use.
|
||
|
|
||
|
|
||
|
// <Roger_Notes> The followin are for different version of EEPROM contents purpose. 2008.11.22.
|
||
|
#define EEPROM_BoardType 0x54 //0x0: RTL8188SU, 0x1: RTL8191SU, 0x2: RTL8192SU, 0x3: RTL8191GU
|
||
|
#define EEPROM_TxPwIndex 0x55 //0x55-0x66, Tx Power index.
|
||
|
#define EEPROM_PwDiff 0x67 // Difference of gain index between legacy and high throughput OFDM.
|
||
|
#define EEPROM_ThermalMeter 0x68 // Thermal meter default value.
|
||
|
#define EEPROM_CrystalCap 0x69 // Crystal Cap.
|
||
|
#define EEPROM_TxPowerBase 0x6a // Tx Power of serving station.
|
||
|
#define EEPROM_TSSI_A 0x6b //TSSI value of path A.
|
||
|
#define EEPROM_TSSI_B 0x6c //TSSI value of path B.
|
||
|
#define EEPROM_TxPwTkMode 0x6d //Tx Power tracking mode.
|
||
|
//#define EEPROM_Reserved 0x6e //0x6e-0x7f, reserved.
|
||
|
|
||
|
// 2009/02/09 Cosa Add for SD3 requirement
|
||
|
#define EEPROM_TX_PWR_HT20_DIFF 0x6e// HT20 Tx Power Index Difference
|
||
|
#define DEFAULT_HT20_TXPWR_DIFF 2 // HT20<->40 default Tx Power Index Difference
|
||
|
#define EEPROM_TX_PWR_OFDM_DIFF 0x71// OFDM Tx Power Index Difference
|
||
|
#define EEPROM_TX_PWR_BAND_EDGE 0x73// TX Power offset at band-edge channel
|
||
|
#define TX_PWR_BAND_EDGE_CHK 0x79// Check if band-edge scheme is enabled
|
||
|
#define EEPROM_Default_LegacyHTTxPowerDiff 0x3
|
||
|
#define EEPROM_USB_Default_OPTIONAL_FUNC 0x8
|
||
|
#define EEPROM_USB_Default_PHY_PARAM 0x0
|
||
|
#define EEPROM_Default_TSSI 0x0
|
||
|
#define EEPROM_Default_TxPwrTkMode 0x0
|
||
|
#define EEPROM_Default_TxPowerDiff 0x0
|
||
|
#define EEPROM_Default_TxPowerBase 0x0
|
||
|
#define EEPROM_Default_ThermalMeter 0x7
|
||
|
#define EEPROM_Default_PwDiff 0x4
|
||
|
#define EEPROM_Default_CrystalCap 0x5
|
||
|
#define EEPROM_Default_TxPower 0x1010
|
||
|
#define EEPROM_Default_BoardType 0x02 // Default: 2X2, RTL8192SU(QFPN68)
|
||
|
#define EEPROM_Default_HT2T_TxPwr 0x10
|
||
|
#define EEPROM_USB_SN BIT0
|
||
|
#define EEPROM_USB_REMOTE_WAKEUP BIT1
|
||
|
#define EEPROM_USB_DEVICE_PWR BIT2
|
||
|
#define EEPROM_EP_NUMBER (BIT3|BIT4)
|
||
|
|
||
|
#define EEPROM_CHANNEL_PLAN_FCC 0x0
|
||
|
#define EEPROM_CHANNEL_PLAN_IC 0x1
|
||
|
#define EEPROM_CHANNEL_PLAN_ETSI 0x2
|
||
|
#define EEPROM_CHANNEL_PLAN_SPAIN 0x3
|
||
|
#define EEPROM_CHANNEL_PLAN_FRANCE 0x4
|
||
|
#define EEPROM_CHANNEL_PLAN_MKK 0x5
|
||
|
#define EEPROM_CHANNEL_PLAN_MKK1 0x6
|
||
|
#define EEPROM_CHANNEL_PLAN_ISRAEL 0x7
|
||
|
#define EEPROM_CHANNEL_PLAN_TELEC 0x8
|
||
|
#define EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN 0x9
|
||
|
#define EEPROM_CHANNEL_PLAN_WORLD_WIDE_13 0xA
|
||
|
#define EEPROM_CHANNEL_PLAN_BY_HW_MASK 0x80
|
||
|
|
||
|
#define EEPROM_CID_DEFAULT 0x0
|
||
|
#define EEPROM_CID_ALPHA 0x1
|
||
|
#define EEPROM_CID_CAMEO 0X8
|
||
|
#define EEPROM_CID_SITECOM 0x9
|
||
|
|
||
|
//#define EEPROM_CID_RUNTOP 0x2
|
||
|
//#define EEPROM_CID_Senao 0x3
|
||
|
//#define EEPROM_CID_TOSHIBA 0x4
|
||
|
//#define EEPROM_CID_NetCore 0x5
|
||
|
#define EEPROM_CID_WHQL 0xFE // added by chiyoko for dtm, 20090108
|
||
|
|
||
|
//-----------------------------------------------------------------
|
||
|
// 0x2c0 FW Command Control register definition, added by Roger, 2008.11.27.
|
||
|
//-----------------------------------------------------------------
|
||
|
#define FW_DIG_DISABLE 0xfd00cc00
|
||
|
#define FW_DIG_ENABLE 0xfd000000
|
||
|
#define FW_DIG_HALT 0xfd000001
|
||
|
#define FW_DIG_RESUME 0xfd000002
|
||
|
#define FW_HIGH_PWR_DISABLE 0xfd000008
|
||
|
#define FW_HIGH_PWR_ENABLE 0xfd000009
|
||
|
#define FW_TXPWR_TRACK_ENABLE 0xfd000017
|
||
|
#define FW_TXPWR_TRACK_DISABLE 0xfd000018
|
||
|
#define FW_RA_RESET 0xfd0000af
|
||
|
#define FW_RA_ACTIVE 0xfd0000a6
|
||
|
#define FW_RA_REFRESH 0xfd0000a0
|
||
|
#define FW_RA_ENABLE_BG 0xfd0000ac
|
||
|
#define FW_IQK_ENABLE 0xf0000020
|
||
|
#define FW_IQK_SUCCESS 0x0000dddd
|
||
|
#define FW_IQK_FAIL 0x0000ffff
|
||
|
#define FW_OP_FAILURE 0xffffffff
|
||
|
#define FW_DM_DISABLE 0xfd00aa00
|
||
|
#define FW_BB_RESET_ENABLE 0xff00000d
|
||
|
#define FW_BB_RESET_DISABLE 0xff00000e
|
||
|
|
||
|
//
|
||
|
//--------------92SU require delete or move to other place later
|
||
|
//
|
||
|
|
||
|
|
||
|
|
||
|
//
|
||
|
//
|
||
|
// 2008/08/06 MH For share the same 92S source/header files, we copy some
|
||
|
// definition to pass 92SU compiler. But we must delete thm later.
|
||
|
//
|
||
|
//
|
||
|
|
||
|
//============================================================================
|
||
|
// 819xUsb Regsiter offset definition
|
||
|
//============================================================================
|
||
|
|
||
|
//2 define it temp!!!
|
||
|
#define RFPC 0x5F // Rx FIFO Packet Count
|
||
|
#define RCR_9356SEL BIT6
|
||
|
#define TCR_LRL_OFFSET 0
|
||
|
#define TCR_SRL_OFFSET 8
|
||
|
#define TCR_MXDMA_OFFSET 21
|
||
|
#define TCR_MXDMA_2048 7
|
||
|
#define TCR_SAT BIT24 // Enable Rate depedent ack timeout timer
|
||
|
#define RCR_MXDMA_OFFSET 8
|
||
|
#define RCR_FIFO_OFFSET 13
|
||
|
#define RCR_OnlyErlPkt BIT31 // Rx Early mode is performed for packet size greater than 1536
|
||
|
#define CWR 0xDC // Contention window register
|
||
|
#define RetryCTR 0xDE // Retry Count register
|
||
|
|
||
|
|
||
|
// For backward compatible for 9xUSB
|
||
|
#define LED1Cfg UnusedRegister // LED1 Configuration Register
|
||
|
#define LED0Cfg UnusedRegister // LED0 Configuration Register
|
||
|
#define GPI UnusedRegister // LED0 Configuration Register
|
||
|
#define BRSR UnusedRegister // LED0 Configuration Register
|
||
|
#define CPU_GEN UnusedRegister // LED0 Configuration Register
|
||
|
#define SIFS UnusedRegister // LED0 Configuration Register
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8190 CPU General Register (offset 0x100, 4 byte)
|
||
|
//----------------------------------------------------------------------------
|
||
|
//#define CPU_CCK_LOOPBACK 0x00030000
|
||
|
#define CPU_GEN_SYSTEM_RESET 0x00000001
|
||
|
//#define CPU_GEN_FIRMWARE_RESET 0x00000008
|
||
|
//#define CPU_GEN_BOOT_RDY 0x00000010
|
||
|
//#define CPU_GEN_FIRM_RDY 0x00000020
|
||
|
//#define CPU_GEN_PUT_CODE_OK 0x00000080
|
||
|
//#define CPU_GEN_BB_RST 0x00000100
|
||
|
//#define CPU_GEN_PWR_STB_CPU 0x00000004
|
||
|
//#define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19
|
||
|
//#define CPU_GEN_NO_LOOPBACK_SET 0x00080000 // Set BIT19 to 1
|
||
|
|
||
|
//----------------------------------------------------------------------------
|
||
|
// 8192S EEROM
|
||
|
//----------------------------------------------------------------------------
|
||
|
|
||
|
//#define RTL8190_EEPROM_ID 0x8129
|
||
|
//#define EEPROM_VID 0x08
|
||
|
//#define EEPROM_PID 0x0A
|
||
|
//#define EEPROM_USB_OPTIONAL 0x0C
|
||
|
//#define EEPROM_NODE_ADDRESS_BYTE_0 0x12
|
||
|
//
|
||
|
//#define EEPROM_TxPowerDiff 0x1F
|
||
|
//#define EEPROM_ThermalMeter 0x20
|
||
|
//#define EEPROM_PwDiff 0x21 //0x21
|
||
|
//#define EEPROM_CrystalCap 0x22 //0x22
|
||
|
//
|
||
|
//#define EEPROM_TxPwIndex_CCK 0x23 //0x23
|
||
|
//#define EEPROM_TxPwIndex_OFDM_24G 0x24 //0x24~0x26
|
||
|
#define EEPROM_TxPwIndex_CCK_V1 0x29 //0x29~0x2B
|
||
|
#define EEPROM_TxPwIndex_OFDM_24G_V1 0x2C //0x2C~0x2E
|
||
|
#define EEPROM_TxPwIndex_Ver 0x27 //0x27
|
||
|
//
|
||
|
//#define EEPROM_Default_TxPowerDiff 0x0
|
||
|
//#define EEPROM_Default_ThermalMeter 0x7
|
||
|
//#define EEPROM_Default_PwDiff 0x4
|
||
|
//#define EEPROM_Default_CrystalCap 0x5
|
||
|
//#define EEPROM_Default_TxPower 0x1010
|
||
|
//#define EEPROM_Customer_ID 0x7B //0x7B:CustomerID
|
||
|
//#define EEPROM_Version 0x50 // 0x50
|
||
|
//#define EEPROM_CustomID 0x52
|
||
|
//#define EEPROM_ChannelPlan 0x7c //0x7C
|
||
|
//#define EEPROM_IC_VER 0x7d //0x7D
|
||
|
//#define EEPROM_CRC 0x7e //0x7E~0x7F
|
||
|
//
|
||
|
//
|
||
|
//#define EEPROM_CID_DEFAULT 0x0
|
||
|
//#define EEPROM_CID_CAMEO 0x1
|
||
|
//#define EEPROM_CID_RUNTOP 0x2
|
||
|
//#define EEPROM_CID_Senao 0x3
|
||
|
//#define EEPROM_CID_TOSHIBA 0x4 // Toshiba setting, Merge by Jacken, 2008/01/31
|
||
|
//#define EEPROM_CID_NetCore 0x5
|
||
|
|
||
|
|
||
|
//
|
||
|
//--------------92SU require delete or move to other place later
|
||
|
//
|
||
|
|
||
|
//============================================================
|
||
|
// CCX Related Register
|
||
|
//============================================================
|
||
|
#define CCX_COMMAND_REG 0x890
|
||
|
// CCX Measurement Command Register. 4 Bytes.
|
||
|
// Bit[0]: R_CLM_En, 1=enable, 0=disable. Enable or disable "Channel Load
|
||
|
// Measurement (CLM)".
|
||
|
// Bit[1]: R_NHM_En, 1=enable, 0=disable. Enable or disalbe "Noise Histogram
|
||
|
// Measurement (NHM)".
|
||
|
// Bit[2~7]: Reserved
|
||
|
// Bit[8]: R_CCX_En: 1=enable, 0=disable. Enable or disable CCX function.
|
||
|
// Note: After clearing this bit, all the result of all NHM_Result and CLM_
|
||
|
// Result are cleared concurrently.
|
||
|
// Bit[9]: R_Ignore_CCA: 1=enable, 0=disable. Enable means that treat CCA
|
||
|
// period as idle time for NHM.
|
||
|
// Bit[10]: R_Ignore_TXON: 1=enable, 0=disable. Enable means that treat TXON
|
||
|
// period as idle time for NHM.
|
||
|
// Bit[11~31]: Reserved.
|
||
|
#define CLM_PERIOD_REG 0x894
|
||
|
// CCX Measurement Period Register, in unit of 4us. 2 Bytes.
|
||
|
#define NHM_PERIOD_REG 0x896
|
||
|
// Noise Histogram Measurement Period Register, in unit of 4us. 2Bytes.
|
||
|
#define NHM_THRESHOLD0 0x898 // Noise Histogram Meashorement0
|
||
|
#define NHM_THRESHOLD1 0x899 // Noise Histogram Meashorement1
|
||
|
#define NHM_THRESHOLD2 0x89A // Noise Histogram Meashorement2
|
||
|
#define NHM_THRESHOLD3 0x89B // Noise Histogram Meashorement3
|
||
|
#define NHM_THRESHOLD4 0x89C // Noise Histogram Meashorement4
|
||
|
#define NHM_THRESHOLD5 0x89D // Noise Histogram Meashorement5
|
||
|
#define NHM_THRESHOLD6 0x89E // Noise Histogram Meashorement6
|
||
|
#define CLM_RESULT_REG 0x8D0
|
||
|
// Channel Load result register. 4 Bytes.
|
||
|
// Bit[0~15]: Total measured duration of CLM. The CCA busy fraction is caculate
|
||
|
// by CLM_RESULT_REG/CLM_PERIOD_REG.
|
||
|
// Bit[16]: Indicate the CLM result is ready.
|
||
|
// Bit[17~31]: Reserved.
|
||
|
#define NHM_RESULT_REG 0x8D4
|
||
|
// Noise Histogram result register. 4 Bytes.
|
||
|
// Bit[0~15]: Total measured duration of NHM. If R_Ignore_CCA=1 or
|
||
|
// R_Ignore_TXON=1, this value will be less than NHM_PERIOD_REG.
|
||
|
// Bit[16]: Indicate the NHM result is ready.
|
||
|
// Bit[17~31]: Reserved.
|
||
|
#define NHM_RPI_COUNTER0 0x8D8
|
||
|
// NHM RPI counter0, the fraction of signal strength < NHM_THRESHOLD0.
|
||
|
#define NHM_RPI_COUNTER1 0x8D9
|
||
|
// NHM RPI counter1, the fraction of signal stren in NHM_THRESH0, NHM_THRESH1
|
||
|
#define NHM_RPI_COUNTER2 0x8DA
|
||
|
// NHM RPI counter2, the fraction of signal stren in NHM_THRESH2, NHM_THRESH3
|
||
|
#define NHM_RPI_COUNTER3 0x8DB
|
||
|
// NHM RPI counter3, the fraction of signal stren in NHM_THRESH4, NHM_THRESH5
|
||
|
#define NHM_RPI_COUNTER4 0x8DC
|
||
|
// NHM RPI counter4, the fraction of signal stren in NHM_THRESH6, NHM_THRESH7
|
||
|
#define NHM_RPI_COUNTER5 0x8DD
|
||
|
// NHM RPI counter5, the fraction of signal stren in NHM_THRESH8, NHM_THRESH9
|
||
|
#define NHM_RPI_COUNTER6 0x8DE
|
||
|
// NHM RPI counter6, the fraction of signal stren in NHM_THRESH10, NHM_THRESH11
|
||
|
#define NHM_RPI_COUNTER7 0x8DF
|
||
|
// NHM RPI counter7, the fraction of signal stren in NHM_THRESH12, NHM_THRESH13
|
||
|
|
||
|
#define HAL_RETRY_LIMIT_INFRA 48
|
||
|
#define HAL_RETRY_LIMIT_AP_ADHOC 7
|
||
|
|
||
|
// HW Readio OFF switch (GPIO BIT)
|
||
|
#define HAL_8192S_HW_GPIO_OFF_BIT BIT3
|
||
|
#define HAL_8192S_HW_GPIO_OFF_MASK 0xF7
|
||
|
#define HAL_8192S_HW_GPIO_WPS_BIT BIT4
|
||
|
|
||
|
#endif //R8192S_HW
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|