254 lines
6.3 KiB
C
254 lines
6.3 KiB
C
![]() |
/*
|
||
|
voodoo3.c - Part of lm_sensors, Linux kernel modules for hardware
|
||
|
monitoring
|
||
|
Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>,
|
||
|
Philip Edelbrock <phil@netroedge.com>,
|
||
|
Ralph Metzler <rjkm@thp.uni-koeln.de>, and
|
||
|
Mark D. Studebaker <mdsxyz123@yahoo.com>
|
||
|
|
||
|
Based on code written by Ralph Metzler <rjkm@thp.uni-koeln.de> and
|
||
|
Simon Vogl
|
||
|
|
||
|
This program is free software; you can redistribute it and/or modify
|
||
|
it under the terms of the GNU General Public License as published by
|
||
|
the Free Software Foundation; either version 2 of the License, or
|
||
|
(at your option) any later version.
|
||
|
|
||
|
This program is distributed in the hope that it will be useful,
|
||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
GNU General Public License for more details.
|
||
|
|
||
|
You should have received a copy of the GNU General Public License
|
||
|
along with this program; if not, write to the Free Software
|
||
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||
|
*/
|
||
|
|
||
|
/* This interfaces to the I2C bus of the Voodoo3 to gain access to
|
||
|
the BT869 and possibly other I2C devices. */
|
||
|
|
||
|
#include <linux/kernel.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/init.h>
|
||
|
#include <linux/pci.h>
|
||
|
#include <linux/i2c.h>
|
||
|
#include <linux/i2c-algo-bit.h>
|
||
|
#include <asm/io.h>
|
||
|
|
||
|
/* the only registers we use */
|
||
|
#define REG 0x78
|
||
|
#define REG2 0x70
|
||
|
|
||
|
/* bit locations in the register */
|
||
|
#define DDC_ENAB 0x00040000
|
||
|
#define DDC_SCL_OUT 0x00080000
|
||
|
#define DDC_SDA_OUT 0x00100000
|
||
|
#define DDC_SCL_IN 0x00200000
|
||
|
#define DDC_SDA_IN 0x00400000
|
||
|
#define I2C_ENAB 0x00800000
|
||
|
#define I2C_SCL_OUT 0x01000000
|
||
|
#define I2C_SDA_OUT 0x02000000
|
||
|
#define I2C_SCL_IN 0x04000000
|
||
|
#define I2C_SDA_IN 0x08000000
|
||
|
|
||
|
/* initialization states */
|
||
|
#define INIT2 0x2
|
||
|
#define INIT3 0x4
|
||
|
|
||
|
/* delays */
|
||
|
#define CYCLE_DELAY 10
|
||
|
#define TIMEOUT (HZ / 2)
|
||
|
|
||
|
|
||
|
static void __iomem *ioaddr;
|
||
|
|
||
|
/* The voo GPIO registers don't have individual masks for each bit
|
||
|
so we always have to read before writing. */
|
||
|
|
||
|
static void bit_vooi2c_setscl(void *data, int val)
|
||
|
{
|
||
|
unsigned int r;
|
||
|
r = readl(ioaddr + REG);
|
||
|
if (val)
|
||
|
r |= I2C_SCL_OUT;
|
||
|
else
|
||
|
r &= ~I2C_SCL_OUT;
|
||
|
writel(r, ioaddr + REG);
|
||
|
readl(ioaddr + REG); /* flush posted write */
|
||
|
}
|
||
|
|
||
|
static void bit_vooi2c_setsda(void *data, int val)
|
||
|
{
|
||
|
unsigned int r;
|
||
|
r = readl(ioaddr + REG);
|
||
|
if (val)
|
||
|
r |= I2C_SDA_OUT;
|
||
|
else
|
||
|
r &= ~I2C_SDA_OUT;
|
||
|
writel(r, ioaddr + REG);
|
||
|
readl(ioaddr + REG); /* flush posted write */
|
||
|
}
|
||
|
|
||
|
/* The GPIO pins are open drain, so the pins always remain outputs.
|
||
|
We rely on the i2c-algo-bit routines to set the pins high before
|
||
|
reading the input from other chips. */
|
||
|
|
||
|
static int bit_vooi2c_getscl(void *data)
|
||
|
{
|
||
|
return (0 != (readl(ioaddr + REG) & I2C_SCL_IN));
|
||
|
}
|
||
|
|
||
|
static int bit_vooi2c_getsda(void *data)
|
||
|
{
|
||
|
return (0 != (readl(ioaddr + REG) & I2C_SDA_IN));
|
||
|
}
|
||
|
|
||
|
static void bit_vooddc_setscl(void *data, int val)
|
||
|
{
|
||
|
unsigned int r;
|
||
|
r = readl(ioaddr + REG);
|
||
|
if (val)
|
||
|
r |= DDC_SCL_OUT;
|
||
|
else
|
||
|
r &= ~DDC_SCL_OUT;
|
||
|
writel(r, ioaddr + REG);
|
||
|
readl(ioaddr + REG); /* flush posted write */
|
||
|
}
|
||
|
|
||
|
static void bit_vooddc_setsda(void *data, int val)
|
||
|
{
|
||
|
unsigned int r;
|
||
|
r = readl(ioaddr + REG);
|
||
|
if (val)
|
||
|
r |= DDC_SDA_OUT;
|
||
|
else
|
||
|
r &= ~DDC_SDA_OUT;
|
||
|
writel(r, ioaddr + REG);
|
||
|
readl(ioaddr + REG); /* flush posted write */
|
||
|
}
|
||
|
|
||
|
static int bit_vooddc_getscl(void *data)
|
||
|
{
|
||
|
return (0 != (readl(ioaddr + REG) & DDC_SCL_IN));
|
||
|
}
|
||
|
|
||
|
static int bit_vooddc_getsda(void *data)
|
||
|
{
|
||
|
return (0 != (readl(ioaddr + REG) & DDC_SDA_IN));
|
||
|
}
|
||
|
|
||
|
static int config_v3(struct pci_dev *dev)
|
||
|
{
|
||
|
unsigned long cadr;
|
||
|
|
||
|
/* map Voodoo3 memory */
|
||
|
cadr = dev->resource[0].start;
|
||
|
cadr &= PCI_BASE_ADDRESS_MEM_MASK;
|
||
|
ioaddr = ioremap_nocache(cadr, 0x1000);
|
||
|
if (ioaddr) {
|
||
|
writel(0x8160, ioaddr + REG2);
|
||
|
writel(0xcffc0020, ioaddr + REG);
|
||
|
dev_info(&dev->dev, "Using Banshee/Voodoo3 I2C device at %p\n", ioaddr);
|
||
|
return 0;
|
||
|
}
|
||
|
return -ENODEV;
|
||
|
}
|
||
|
|
||
|
static struct i2c_algo_bit_data voo_i2c_bit_data = {
|
||
|
.setsda = bit_vooi2c_setsda,
|
||
|
.setscl = bit_vooi2c_setscl,
|
||
|
.getsda = bit_vooi2c_getsda,
|
||
|
.getscl = bit_vooi2c_getscl,
|
||
|
.udelay = CYCLE_DELAY,
|
||
|
.mdelay = CYCLE_DELAY,
|
||
|
.timeout = TIMEOUT
|
||
|
};
|
||
|
|
||
|
static struct i2c_adapter voodoo3_i2c_adapter = {
|
||
|
.owner = THIS_MODULE,
|
||
|
.class = I2C_CLASS_TV_ANALOG,
|
||
|
.name = "I2C Voodoo3/Banshee adapter",
|
||
|
.algo_data = &voo_i2c_bit_data,
|
||
|
};
|
||
|
|
||
|
static struct i2c_algo_bit_data voo_ddc_bit_data = {
|
||
|
.setsda = bit_vooddc_setsda,
|
||
|
.setscl = bit_vooddc_setscl,
|
||
|
.getsda = bit_vooddc_getsda,
|
||
|
.getscl = bit_vooddc_getscl,
|
||
|
.udelay = CYCLE_DELAY,
|
||
|
.mdelay = CYCLE_DELAY,
|
||
|
.timeout = TIMEOUT
|
||
|
};
|
||
|
|
||
|
static struct i2c_adapter voodoo3_ddc_adapter = {
|
||
|
.owner = THIS_MODULE,
|
||
|
.class = I2C_CLASS_DDC,
|
||
|
.name = "DDC Voodoo3/Banshee adapter",
|
||
|
.algo_data = &voo_ddc_bit_data,
|
||
|
};
|
||
|
|
||
|
static struct pci_device_id voodoo3_ids[] __devinitdata = {
|
||
|
{ PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO3) },
|
||
|
{ PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_BANSHEE) },
|
||
|
{ 0, }
|
||
|
};
|
||
|
|
||
|
MODULE_DEVICE_TABLE (pci, voodoo3_ids);
|
||
|
|
||
|
static int __devinit voodoo3_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
||
|
{
|
||
|
int retval;
|
||
|
|
||
|
retval = config_v3(dev);
|
||
|
if (retval)
|
||
|
return retval;
|
||
|
|
||
|
/* set up the sysfs linkage to our parent device */
|
||
|
voodoo3_i2c_adapter.dev.parent = &dev->dev;
|
||
|
voodoo3_ddc_adapter.dev.parent = &dev->dev;
|
||
|
|
||
|
retval = i2c_bit_add_bus(&voodoo3_i2c_adapter);
|
||
|
if (retval)
|
||
|
return retval;
|
||
|
retval = i2c_bit_add_bus(&voodoo3_ddc_adapter);
|
||
|
if (retval)
|
||
|
i2c_bit_del_bus(&voodoo3_i2c_adapter);
|
||
|
return retval;
|
||
|
}
|
||
|
|
||
|
static void __devexit voodoo3_remove(struct pci_dev *dev)
|
||
|
{
|
||
|
i2c_bit_del_bus(&voodoo3_i2c_adapter);
|
||
|
i2c_bit_del_bus(&voodoo3_ddc_adapter);
|
||
|
iounmap(ioaddr);
|
||
|
}
|
||
|
|
||
|
static struct pci_driver voodoo3_driver = {
|
||
|
.name = "voodoo3_smbus",
|
||
|
.id_table = voodoo3_ids,
|
||
|
.probe = voodoo3_probe,
|
||
|
.remove = __devexit_p(voodoo3_remove),
|
||
|
};
|
||
|
|
||
|
static int __init i2c_voodoo3_init(void)
|
||
|
{
|
||
|
return pci_register_driver(&voodoo3_driver);
|
||
|
}
|
||
|
|
||
|
static void __exit i2c_voodoo3_exit(void)
|
||
|
{
|
||
|
pci_unregister_driver(&voodoo3_driver);
|
||
|
}
|
||
|
|
||
|
|
||
|
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
|
||
|
"Philip Edelbrock <phil@netroedge.com>, "
|
||
|
"Ralph Metzler <rjkm@thp.uni-koeln.de>, "
|
||
|
"and Mark D. Studebaker <mdsxyz123@yahoo.com>");
|
||
|
MODULE_DESCRIPTION("Voodoo3 I2C/SMBus driver");
|
||
|
MODULE_LICENSE("GPL");
|
||
|
|
||
|
module_init(i2c_voodoo3_init);
|
||
|
module_exit(i2c_voodoo3_exit);
|