dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/sound/oss/swarm_cs4297a.c

2769 lines
88 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*******************************************************************************
*
* "swarm_cs4297a.c" -- Cirrus Logic-Crystal CS4297a linux audio driver.
*
* Copyright (C) 2001 Broadcom Corporation.
* Copyright (C) 2000,2001 Cirrus Logic Corp.
* -- adapted from drivers by Thomas Sailer,
* -- but don't bug him; Problems should go to:
* -- tom woller (twoller@crystal.cirrus.com) or
* (audio@crystal.cirrus.com).
* -- adapted from cs4281 PCI driver for cs4297a on
* BCM1250 Synchronous Serial interface
* (Kip Walker, Broadcom Corp.)
* Copyright (C) 2004 Maciej W. Rozycki
* Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Module command line parameters:
* none
*
* Supported devices:
* /dev/dsp standard /dev/dsp device, (mostly) OSS compatible
* /dev/mixer standard /dev/mixer device, (mostly) OSS compatible
* /dev/midi simple MIDI UART interface, no ioctl
*
* Modification History
* 08/20/00 trw - silence and no stopping DAC until release
* 08/23/00 trw - added CS_DBG statements, fix interrupt hang issue on DAC stop.
* 09/18/00 trw - added 16bit only record with conversion
* 09/24/00 trw - added Enhanced Full duplex (separate simultaneous
* capture/playback rates)
* 10/03/00 trw - fixed mmap (fixed GRECORD and the XMMS mmap test plugin
* libOSSm.so)
* 10/11/00 trw - modified for 2.4.0-test9 kernel enhancements (NR_MAP removal)
* 11/03/00 trw - fixed interrupt loss/stutter, added debug.
* 11/10/00 bkz - added __devinit to cs4297a_hw_init()
* 11/10/00 trw - fixed SMP and capture spinlock hang.
* 12/04/00 trw - cleaned up CSDEBUG flags and added "defaultorder" moduleparm.
* 12/05/00 trw - fixed polling (myth2), and added underrun swptr fix.
* 12/08/00 trw - added PM support.
* 12/14/00 trw - added wrapper code, builds under 2.4.0, 2.2.17-20, 2.2.17-8
* (RH/Dell base), 2.2.18, 2.2.12. cleaned up code mods by ident.
* 12/19/00 trw - added PM support for 2.2 base (apm_callback). other PM cleanup.
* 12/21/00 trw - added fractional "defaultorder" inputs. if >100 then use
* defaultorder-100 as power of 2 for the buffer size. example:
* 106 = 2^(106-100) = 2^6 = 64 bytes for the buffer size.
*
*******************************************************************************/
#include <linux/list.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/sound.h>
#include <linux/slab.h>
#include <linux/soundcard.h>
#include <linux/ac97_codec.h>
#include <linux/pci.h>
#include <linux/bitops.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/poll.h>
[PATCH] sem2mutex: sound/oss/ Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 11:00:39 +00:00
#include <linux/mutex.h>
[PATCH] OSS: Use ARRAY_SIZE macro when appropriate (2) Use ARRAY_SIZE macro already defined in kernel.h Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 08:52:08 +00:00
#include <linux/kernel.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <asm/byteorder.h>
#include <asm/dma.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/sb1250_int.h>
#include <asm/sibyte/sb1250_dma.h>
#include <asm/sibyte/sb1250_scd.h>
#include <asm/sibyte/sb1250_syncser.h>
#include <asm/sibyte/sb1250_mac.h>
#include <asm/sibyte/sb1250.h>
struct cs4297a_state;
sound: autoconvert trivial BKL users to private mutex The usage of the BKL in the OSS sound drivers is trivial, and each of them only locks against itself, so it can be turned into per-driver mutexes. This is the script that was used for the conversion: file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-14 19:53:41 +00:00
static DEFINE_MUTEX(swarm_cs4297a_mutex);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static void stop_dac(struct cs4297a_state *s);
static void stop_adc(struct cs4297a_state *s);
static void start_dac(struct cs4297a_state *s);
static void start_adc(struct cs4297a_state *s);
#undef OSS_DOCUMENTED_MIXER_SEMANTICS
// ---------------------------------------------------------------------
#define CS4297a_MAGIC 0xf00beef1
// buffer order determines the size of the dma buffer for the driver.
// under Linux, a smaller buffer allows more responsiveness from many of the
// applications (e.g. games). A larger buffer allows some of the apps (esound)
// to not underrun the dma buffer as easily. As default, use 32k (order=3)
// rather than 64k as some of the games work more responsively.
// log base 2( buff sz = 32k).
//
// Turn on/off debugging compilation by commenting out "#define CSDEBUG"
//
#define CSDEBUG 0
#if CSDEBUG
#define CSDEBUG_INTERFACE 1
#else
#undef CSDEBUG_INTERFACE
#endif
//
// cs_debugmask areas
//
#define CS_INIT 0x00000001 // initialization and probe functions
#define CS_ERROR 0x00000002 // tmp debugging bit placeholder
#define CS_INTERRUPT 0x00000004 // interrupt handler (separate from all other)
#define CS_FUNCTION 0x00000008 // enter/leave functions
#define CS_WAVE_WRITE 0x00000010 // write information for wave
#define CS_WAVE_READ 0x00000020 // read information for wave
#define CS_AC97 0x00000040 // AC97 register access
#define CS_DESCR 0x00000080 // descriptor management
#define CS_OPEN 0x00000400 // all open functions in the driver
#define CS_RELEASE 0x00000800 // all release functions in the driver
#define CS_PARMS 0x00001000 // functional and operational parameters
#define CS_IOCTL 0x00002000 // ioctl (non-mixer)
#define CS_TMP 0x10000000 // tmp debug mask bit
//
// CSDEBUG is usual mode is set to 1, then use the
// cs_debuglevel and cs_debugmask to turn on or off debugging.
// Debug level of 1 has been defined to be kernel errors and info
// that should be printed on any released driver.
//
#if CSDEBUG
#define CS_DBGOUT(mask,level,x) if((cs_debuglevel >= (level)) && ((mask) & cs_debugmask) ) {x;}
#else
#define CS_DBGOUT(mask,level,x)
#endif
#if CSDEBUG
static unsigned long cs_debuglevel = 4; // levels range from 1-9
static unsigned long cs_debugmask = CS_INIT /*| CS_IOCTL*/;
[PATCH] Remove MODULE_PARM MODULE_PARM was actually breaking: recent gcc version optimize them out as unused. It's time to replace the last users, which are generally in the most unloved drivers anyway. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 11:07:05 +00:00
module_param(cs_debuglevel, int, 0);
module_param(cs_debugmask, int, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
#define CS_TRUE 1
#define CS_FALSE 0
#define CS_TYPE_ADC 0
#define CS_TYPE_DAC 1
#define SER_BASE (A_SER_BASE_1 + KSEG1)
#define SS_CSR(t) (SER_BASE+t)
#define SS_TXTBL(t) (SER_BASE+R_SER_TX_TABLE_BASE+(t*8))
#define SS_RXTBL(t) (SER_BASE+R_SER_RX_TABLE_BASE+(t*8))
#define FRAME_BYTES 32
#define FRAME_SAMPLE_BYTES 4
/* Should this be variable? */
#define SAMPLE_BUF_SIZE (16*1024)
#define SAMPLE_FRAME_COUNT (SAMPLE_BUF_SIZE / FRAME_SAMPLE_BYTES)
/* The driver can explode/shrink the frames to/from a smaller sample
buffer */
#define DMA_BLOAT_FACTOR 1
#define DMA_DESCR (SAMPLE_FRAME_COUNT / DMA_BLOAT_FACTOR)
#define DMA_BUF_SIZE (DMA_DESCR * FRAME_BYTES)
/* Use the maxmium count (255 == 5.1 ms between interrupts) */
#define DMA_INT_CNT ((1 << S_DMA_INT_PKTCNT) - 1)
/* Figure this out: how many TX DMAs ahead to schedule a reg access */
#define REG_LATENCY 150
#define FRAME_TX_US 20
#define SERDMA_NEXTBUF(d,f) (((d)->f+1) % (d)->ringsz)
static const char invalid_magic[] =
KERN_CRIT "cs4297a: invalid magic value\n";
#define VALIDATE_STATE(s) \
({ \
if (!(s) || (s)->magic != CS4297a_MAGIC) { \
printk(invalid_magic); \
return -ENXIO; \
} \
})
struct list_head cs4297a_devs = { &cs4297a_devs, &cs4297a_devs };
typedef struct serdma_descr_s {
u64 descr_a;
u64 descr_b;
} serdma_descr_t;
typedef unsigned long paddr_t;
typedef struct serdma_s {
unsigned ringsz;
serdma_descr_t *descrtab;
serdma_descr_t *descrtab_end;
paddr_t descrtab_phys;
serdma_descr_t *descr_add;
serdma_descr_t *descr_rem;
u64 *dma_buf; // buffer for DMA contents (frames)
paddr_t dma_buf_phys;
u16 *sample_buf; // tmp buffer for sample conversions
u16 *sb_swptr;
u16 *sb_hwptr;
u16 *sb_end;
dma_addr_t dmaaddr;
// unsigned buforder; // Log base 2 of 'dma_buf' size in bytes..
unsigned numfrag; // # of 'fragments' in the buffer.
unsigned fragshift; // Log base 2 of fragment size.
unsigned hwptr, swptr;
unsigned total_bytes; // # bytes process since open.
unsigned blocks; // last returned blocks value GETOPTR
unsigned wakeup; // interrupt occurred on block
int count;
unsigned underrun; // underrun flag
unsigned error; // over/underrun
wait_queue_head_t wait;
wait_queue_head_t reg_wait;
// redundant, but makes calculations easier
unsigned fragsize; // 2**fragshift..
unsigned sbufsz; // 2**buforder.
unsigned fragsamples;
// OSS stuff
unsigned mapped:1; // Buffer mapped in cs4297a_mmap()?
unsigned ready:1; // prog_dmabuf_dac()/adc() successful?
unsigned endcleared:1;
unsigned type:1; // adc or dac buffer (CS_TYPE_XXX)
unsigned ossfragshift;
int ossmaxfrags;
unsigned subdivision;
} serdma_t;
struct cs4297a_state {
// magic
unsigned int magic;
struct list_head list;
// soundcore stuff
int dev_audio;
int dev_mixer;
// hardware resources
unsigned int irq;
struct {
unsigned int rx_ovrrn; /* FIFO */
unsigned int rx_overflow; /* staging buffer */
unsigned int tx_underrun;
unsigned int rx_bad;
unsigned int rx_good;
} stats;
// mixer registers
struct {
unsigned short vol[10];
unsigned int recsrc;
unsigned int modcnt;
unsigned short micpreamp;
} mix;
// wave stuff
struct properties {
unsigned fmt;
unsigned fmt_original; // original requested format
unsigned channels;
unsigned rate;
} prop_dac, prop_adc;
unsigned conversion:1; // conversion from 16 to 8 bit in progress
unsigned ena;
spinlock_t lock;
[PATCH] sem2mutex: sound/oss/ Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 11:00:39 +00:00
struct mutex open_mutex;
struct mutex open_sem_adc;
struct mutex open_sem_dac;
[PATCH] introduce fmode_t, do annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-09-02 19:28:45 +00:00
fmode_t open_mode;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
wait_queue_head_t open_wait;
wait_queue_head_t open_wait_adc;
wait_queue_head_t open_wait_dac;
dma_addr_t dmaaddr_sample_buf;
unsigned buforder_sample_buf; // Log base 2 of 'dma_buf' size in bytes..
serdma_t dma_dac, dma_adc;
volatile u16 read_value;
volatile u16 read_reg;
volatile u64 reg_request;
};
#if 1
#define prog_codec(a,b)
#define dealloc_dmabuf(a,b);
#endif
static int prog_dmabuf_adc(struct cs4297a_state *s)
{
s->dma_adc.ready = 1;
return 0;
}
static int prog_dmabuf_dac(struct cs4297a_state *s)
{
s->dma_dac.ready = 1;
return 0;
}
static void clear_advance(void *buf, unsigned bsize, unsigned bptr,
unsigned len, unsigned char c)
{
if (bptr + len > bsize) {
unsigned x = bsize - bptr;
memset(((char *) buf) + bptr, c, x);
bptr = 0;
len -= x;
}
CS_DBGOUT(CS_WAVE_WRITE, 4, printk(KERN_INFO
"cs4297a: clear_advance(): memset %d at 0x%.8x for %d size \n",
(unsigned)c, (unsigned)((char *) buf) + bptr, len));
memset(((char *) buf) + bptr, c, len);
}
#if CSDEBUG
// DEBUG ROUTINES
#define SOUND_MIXER_CS_GETDBGLEVEL _SIOWR('M',120, int)
#define SOUND_MIXER_CS_SETDBGLEVEL _SIOWR('M',121, int)
#define SOUND_MIXER_CS_GETDBGMASK _SIOWR('M',122, int)
#define SOUND_MIXER_CS_SETDBGMASK _SIOWR('M',123, int)
static void cs_printioctl(unsigned int x)
{
unsigned int i;
unsigned char vidx;
// Index of mixtable1[] member is Device ID
// and must be <= SOUND_MIXER_NRDEVICES.
// Value of array member is index into s->mix.vol[]
static const unsigned char mixtable1[SOUND_MIXER_NRDEVICES] = {
[SOUND_MIXER_PCM] = 1, // voice
[SOUND_MIXER_LINE1] = 2, // AUX
[SOUND_MIXER_CD] = 3, // CD
[SOUND_MIXER_LINE] = 4, // Line
[SOUND_MIXER_SYNTH] = 5, // FM
[SOUND_MIXER_MIC] = 6, // Mic
[SOUND_MIXER_SPEAKER] = 7, // Speaker
[SOUND_MIXER_RECLEV] = 8, // Recording level
[SOUND_MIXER_VOLUME] = 9 // Master Volume
};
switch (x) {
case SOUND_MIXER_CS_GETDBGMASK:
CS_DBGOUT(CS_IOCTL, 4,
printk("SOUND_MIXER_CS_GETDBGMASK:\n"));
break;
case SOUND_MIXER_CS_GETDBGLEVEL:
CS_DBGOUT(CS_IOCTL, 4,
printk("SOUND_MIXER_CS_GETDBGLEVEL:\n"));
break;
case SOUND_MIXER_CS_SETDBGMASK:
CS_DBGOUT(CS_IOCTL, 4,
printk("SOUND_MIXER_CS_SETDBGMASK:\n"));
break;
case SOUND_MIXER_CS_SETDBGLEVEL:
CS_DBGOUT(CS_IOCTL, 4,
printk("SOUND_MIXER_CS_SETDBGLEVEL:\n"));
break;
case OSS_GETVERSION:
CS_DBGOUT(CS_IOCTL, 4, printk("OSS_GETVERSION:\n"));
break;
case SNDCTL_DSP_SYNC:
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SYNC:\n"));
break;
case SNDCTL_DSP_SETDUPLEX:
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETDUPLEX:\n"));
break;
case SNDCTL_DSP_GETCAPS:
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETCAPS:\n"));
break;
case SNDCTL_DSP_RESET:
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_RESET:\n"));
break;
case SNDCTL_DSP_SPEED:
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SPEED:\n"));
break;
case SNDCTL_DSP_STEREO:
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_STEREO:\n"));
break;
case SNDCTL_DSP_CHANNELS:
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_CHANNELS:\n"));
break;
case SNDCTL_DSP_GETFMTS:
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETFMTS:\n"));
break;
case SNDCTL_DSP_SETFMT:
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETFMT:\n"));
break;
case SNDCTL_DSP_POST:
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_POST:\n"));
break;
case SNDCTL_DSP_GETTRIGGER:
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETTRIGGER:\n"));
break;
case SNDCTL_DSP_SETTRIGGER:
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETTRIGGER:\n"));
break;
case SNDCTL_DSP_GETOSPACE:
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETOSPACE:\n"));
break;
case SNDCTL_DSP_GETISPACE:
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETISPACE:\n"));
break;
case SNDCTL_DSP_NONBLOCK:
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_NONBLOCK:\n"));
break;
case SNDCTL_DSP_GETODELAY:
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETODELAY:\n"));
break;
case SNDCTL_DSP_GETIPTR:
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETIPTR:\n"));
break;
case SNDCTL_DSP_GETOPTR:
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETOPTR:\n"));
break;
case SNDCTL_DSP_GETBLKSIZE:
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETBLKSIZE:\n"));
break;
case SNDCTL_DSP_SETFRAGMENT:
CS_DBGOUT(CS_IOCTL, 4,
printk("SNDCTL_DSP_SETFRAGMENT:\n"));
break;
case SNDCTL_DSP_SUBDIVIDE:
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SUBDIVIDE:\n"));
break;
case SOUND_PCM_READ_RATE:
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_PCM_READ_RATE:\n"));
break;
case SOUND_PCM_READ_CHANNELS:
CS_DBGOUT(CS_IOCTL, 4,
printk("SOUND_PCM_READ_CHANNELS:\n"));
break;
case SOUND_PCM_READ_BITS:
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_PCM_READ_BITS:\n"));
break;
case SOUND_PCM_WRITE_FILTER:
CS_DBGOUT(CS_IOCTL, 4,
printk("SOUND_PCM_WRITE_FILTER:\n"));
break;
case SNDCTL_DSP_SETSYNCRO:
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETSYNCRO:\n"));
break;
case SOUND_PCM_READ_FILTER:
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_PCM_READ_FILTER:\n"));
break;
case SOUND_MIXER_PRIVATE1:
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE1:\n"));
break;
case SOUND_MIXER_PRIVATE2:
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE2:\n"));
break;
case SOUND_MIXER_PRIVATE3:
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE3:\n"));
break;
case SOUND_MIXER_PRIVATE4:
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE4:\n"));
break;
case SOUND_MIXER_PRIVATE5:
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE5:\n"));
break;
case SOUND_MIXER_INFO:
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_INFO:\n"));
break;
case SOUND_OLD_MIXER_INFO:
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_OLD_MIXER_INFO:\n"));
break;
default:
switch (_IOC_NR(x)) {
case SOUND_MIXER_VOLUME:
CS_DBGOUT(CS_IOCTL, 4,
printk("SOUND_MIXER_VOLUME:\n"));
break;
case SOUND_MIXER_SPEAKER:
CS_DBGOUT(CS_IOCTL, 4,
printk("SOUND_MIXER_SPEAKER:\n"));
break;
case SOUND_MIXER_RECLEV:
CS_DBGOUT(CS_IOCTL, 4,
printk("SOUND_MIXER_RECLEV:\n"));
break;
case SOUND_MIXER_MIC:
CS_DBGOUT(CS_IOCTL, 4,
printk("SOUND_MIXER_MIC:\n"));
break;
case SOUND_MIXER_SYNTH:
CS_DBGOUT(CS_IOCTL, 4,
printk("SOUND_MIXER_SYNTH:\n"));
break;
case SOUND_MIXER_RECSRC:
CS_DBGOUT(CS_IOCTL, 4,
printk("SOUND_MIXER_RECSRC:\n"));
break;
case SOUND_MIXER_DEVMASK:
CS_DBGOUT(CS_IOCTL, 4,
printk("SOUND_MIXER_DEVMASK:\n"));
break;
case SOUND_MIXER_RECMASK:
CS_DBGOUT(CS_IOCTL, 4,
printk("SOUND_MIXER_RECMASK:\n"));
break;
case SOUND_MIXER_STEREODEVS:
CS_DBGOUT(CS_IOCTL, 4,
printk("SOUND_MIXER_STEREODEVS:\n"));
break;
case SOUND_MIXER_CAPS:
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_CAPS:\n"));
break;
default:
i = _IOC_NR(x);
if (i >= SOUND_MIXER_NRDEVICES
|| !(vidx = mixtable1[i])) {
CS_DBGOUT(CS_IOCTL, 4, printk
("UNKNOWN IOCTL: 0x%.8x NR=%d\n",
x, i));
} else {
CS_DBGOUT(CS_IOCTL, 4, printk
("SOUND_MIXER_IOCTL AC9x: 0x%.8x NR=%d\n",
x, i));
}
break;
}
}
}
#endif
static int ser_init(struct cs4297a_state *s)
{
int i;
CS_DBGOUT(CS_INIT, 2,
printk(KERN_INFO "cs4297a: Setting up serial parameters\n"));
__raw_writeq(M_SYNCSER_CMD_RX_RESET | M_SYNCSER_CMD_TX_RESET, SS_CSR(R_SER_CMD));
__raw_writeq(M_SYNCSER_MSB_FIRST, SS_CSR(R_SER_MODE));
__raw_writeq(32, SS_CSR(R_SER_MINFRM_SZ));
__raw_writeq(32, SS_CSR(R_SER_MAXFRM_SZ));
__raw_writeq(1, SS_CSR(R_SER_TX_RD_THRSH));
__raw_writeq(4, SS_CSR(R_SER_TX_WR_THRSH));
__raw_writeq(8, SS_CSR(R_SER_RX_RD_THRSH));
/* This looks good from experimentation */
__raw_writeq((M_SYNCSER_TXSYNC_INT | V_SYNCSER_TXSYNC_DLY(0) | M_SYNCSER_TXCLK_EXT |
M_SYNCSER_RXSYNC_INT | V_SYNCSER_RXSYNC_DLY(1) | M_SYNCSER_RXCLK_EXT | M_SYNCSER_RXSYNC_EDGE),
SS_CSR(R_SER_LINE_MODE));
/* This looks good from experimentation */
__raw_writeq(V_SYNCSER_SEQ_COUNT(14) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_STROBE,
SS_TXTBL(0));
__raw_writeq(V_SYNCSER_SEQ_COUNT(15) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_BYTE,
SS_TXTBL(1));
__raw_writeq(V_SYNCSER_SEQ_COUNT(13) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_BYTE,
SS_TXTBL(2));
__raw_writeq(V_SYNCSER_SEQ_COUNT( 0) | M_SYNCSER_SEQ_ENABLE |
M_SYNCSER_SEQ_STROBE | M_SYNCSER_SEQ_LAST, SS_TXTBL(3));
__raw_writeq(V_SYNCSER_SEQ_COUNT(14) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_STROBE,
SS_RXTBL(0));
__raw_writeq(V_SYNCSER_SEQ_COUNT(15) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_BYTE,
SS_RXTBL(1));
__raw_writeq(V_SYNCSER_SEQ_COUNT(13) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_BYTE,
SS_RXTBL(2));
__raw_writeq(V_SYNCSER_SEQ_COUNT( 0) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_STROBE |
M_SYNCSER_SEQ_LAST, SS_RXTBL(3));
for (i=4; i<16; i++) {
/* Just in case... */
__raw_writeq(M_SYNCSER_SEQ_LAST, SS_TXTBL(i));
__raw_writeq(M_SYNCSER_SEQ_LAST, SS_RXTBL(i));
}
return 0;
}
static int init_serdma(serdma_t *dma)
{
CS_DBGOUT(CS_INIT, 2,
printk(KERN_ERR "cs4297a: desc - %d sbufsize - %d dbufsize - %d\n",
DMA_DESCR, SAMPLE_BUF_SIZE, DMA_BUF_SIZE));
/* Descriptors */
dma->ringsz = DMA_DESCR;
[PATCH] OSS: replace kmalloc()+memset() combos with kzalloc() Replace kmalloc() + memset() pairs with the appropriate kzalloc() calls. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:33:16 +00:00
dma->descrtab = kzalloc(dma->ringsz * sizeof(serdma_descr_t), GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (!dma->descrtab) {
[PATCH] OSS: replace kmalloc()+memset() combos with kzalloc() Replace kmalloc() + memset() pairs with the appropriate kzalloc() calls. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:33:16 +00:00
printk(KERN_ERR "cs4297a: kzalloc descrtab failed\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -1;
}
dma->descrtab_end = dma->descrtab + dma->ringsz;
/* XXX bloddy mess, use proper DMA API here ... */
dma->descrtab_phys = CPHYSADDR((long)dma->descrtab);
dma->descr_add = dma->descr_rem = dma->descrtab;
/* Frame buffer area */
[PATCH] OSS: replace kmalloc()+memset() combos with kzalloc() Replace kmalloc() + memset() pairs with the appropriate kzalloc() calls. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:33:16 +00:00
dma->dma_buf = kzalloc(DMA_BUF_SIZE, GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (!dma->dma_buf) {
[PATCH] OSS: replace kmalloc()+memset() combos with kzalloc() Replace kmalloc() + memset() pairs with the appropriate kzalloc() calls. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:33:16 +00:00
printk(KERN_ERR "cs4297a: kzalloc dma_buf failed\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
kfree(dma->descrtab);
return -1;
}
dma->dma_buf_phys = CPHYSADDR((long)dma->dma_buf);
/* Samples buffer area */
dma->sbufsz = SAMPLE_BUF_SIZE;
dma->sample_buf = kmalloc(dma->sbufsz, GFP_KERNEL);
if (!dma->sample_buf) {
printk(KERN_ERR "cs4297a: kmalloc sample_buf failed\n");
kfree(dma->descrtab);
kfree(dma->dma_buf);
return -1;
}
dma->sb_swptr = dma->sb_hwptr = dma->sample_buf;
dma->sb_end = (u16 *)((void *)dma->sample_buf + dma->sbufsz);
dma->fragsize = dma->sbufsz >> 1;
CS_DBGOUT(CS_INIT, 4,
printk(KERN_ERR "cs4297a: descrtab - %08x dma_buf - %x sample_buf - %x\n",
(int)dma->descrtab, (int)dma->dma_buf,
(int)dma->sample_buf));
return 0;
}
static int dma_init(struct cs4297a_state *s)
{
int i;
CS_DBGOUT(CS_INIT, 2,
printk(KERN_INFO "cs4297a: Setting up DMA\n"));
if (init_serdma(&s->dma_adc) ||
init_serdma(&s->dma_dac))
return -1;
if (__raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_RX))||
__raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_TX))) {
panic("DMA state corrupted?!");
}
/* Initialize now - the descr/buffer pairings will never
change... */
for (i=0; i<DMA_DESCR; i++) {
s->dma_dac.descrtab[i].descr_a = M_DMA_SERRX_SOP | V_DMA_DSCRA_A_SIZE(1) |
(s->dma_dac.dma_buf_phys + i*FRAME_BYTES);
s->dma_dac.descrtab[i].descr_b = V_DMA_DSCRB_PKT_SIZE(FRAME_BYTES);
s->dma_adc.descrtab[i].descr_a = V_DMA_DSCRA_A_SIZE(1) |
(s->dma_adc.dma_buf_phys + i*FRAME_BYTES);
s->dma_adc.descrtab[i].descr_b = 0;
}
__raw_writeq((M_DMA_EOP_INT_EN | V_DMA_INT_PKTCNT(DMA_INT_CNT) |
V_DMA_RINGSZ(DMA_DESCR) | M_DMA_TDX_EN),
SS_CSR(R_SER_DMA_CONFIG0_RX));
__raw_writeq(M_DMA_L2CA, SS_CSR(R_SER_DMA_CONFIG1_RX));
__raw_writeq(s->dma_adc.descrtab_phys, SS_CSR(R_SER_DMA_DSCR_BASE_RX));
__raw_writeq(V_DMA_RINGSZ(DMA_DESCR), SS_CSR(R_SER_DMA_CONFIG0_TX));
__raw_writeq(M_DMA_L2CA | M_DMA_NO_DSCR_UPDT, SS_CSR(R_SER_DMA_CONFIG1_TX));
__raw_writeq(s->dma_dac.descrtab_phys, SS_CSR(R_SER_DMA_DSCR_BASE_TX));
/* Prep the receive DMA descriptor ring */
__raw_writeq(DMA_DESCR, SS_CSR(R_SER_DMA_DSCR_COUNT_RX));
__raw_writeq(M_SYNCSER_DMA_RX_EN | M_SYNCSER_DMA_TX_EN, SS_CSR(R_SER_DMA_ENABLE));
__raw_writeq((M_SYNCSER_RX_SYNC_ERR | M_SYNCSER_RX_OVERRUN | M_SYNCSER_RX_EOP_COUNT),
SS_CSR(R_SER_INT_MASK));
/* Enable the rx/tx; let the codec warm up to the sync and
start sending good frames before the receive FIFO is
enabled */
__raw_writeq(M_SYNCSER_CMD_TX_EN, SS_CSR(R_SER_CMD));
udelay(1000);
__raw_writeq(M_SYNCSER_CMD_RX_EN | M_SYNCSER_CMD_TX_EN, SS_CSR(R_SER_CMD));
/* XXXKW is this magic? (the "1" part) */
while ((__raw_readq(SS_CSR(R_SER_STATUS)) & 0xf1) != 1)
;
CS_DBGOUT(CS_INIT, 4,
printk(KERN_INFO "cs4297a: status: %08x\n",
(unsigned int)(__raw_readq(SS_CSR(R_SER_STATUS)) & 0xffffffff)));
return 0;
}
static int serdma_reg_access(struct cs4297a_state *s, u64 data)
{
serdma_t *d = &s->dma_dac;
u64 *data_p;
unsigned swptr;
[PATCH] proper flags type of spin_lock_irqsave() Convert various spin_lock_irqsave() callers to correctly use `unsigned long'. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 06:27:37 +00:00
unsigned long flags;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
serdma_descr_t *descr;
if (s->reg_request) {
printk(KERN_ERR "cs4297a: attempt to issue multiple reg_access\n");
return -1;
}
if (s->ena & FMODE_WRITE) {
/* Since a writer has the DSP open, we have to mux the
request in */
s->reg_request = data;
interruptible_sleep_on(&s->dma_dac.reg_wait);
/* XXXKW how can I deal with the starvation case where
the opener isn't writing? */
} else {
/* Be safe when changing ring pointers */
spin_lock_irqsave(&s->lock, flags);
if (d->hwptr != d->swptr) {
printk(KERN_ERR "cs4297a: reg access found bookkeeping error (hw/sw = %d/%d\n",
d->hwptr, d->swptr);
spin_unlock_irqrestore(&s->lock, flags);
return -1;
}
swptr = d->swptr;
d->hwptr = d->swptr = (d->swptr + 1) % d->ringsz;
spin_unlock_irqrestore(&s->lock, flags);
descr = &d->descrtab[swptr];
data_p = &d->dma_buf[swptr * 4];
*data_p = cpu_to_be64(data);
__raw_writeq(1, SS_CSR(R_SER_DMA_DSCR_COUNT_TX));
CS_DBGOUT(CS_DESCR, 4,
printk(KERN_INFO "cs4297a: add_tx %p (%x -> %x)\n",
data_p, swptr, d->hwptr));
}
CS_DBGOUT(CS_FUNCTION, 6,
printk(KERN_INFO "cs4297a: serdma_reg_access()-\n"));
return 0;
}
//****************************************************************************
// "cs4297a_read_ac97" -- Reads an AC97 register
//****************************************************************************
static int cs4297a_read_ac97(struct cs4297a_state *s, u32 offset,
u32 * value)
{
CS_DBGOUT(CS_AC97, 1,
printk(KERN_INFO "cs4297a: read reg %2x\n", offset));
if (serdma_reg_access(s, (0xCLL << 60) | (1LL << 47) | ((u64)(offset & 0x7F) << 40)))
return -1;
interruptible_sleep_on(&s->dma_adc.reg_wait);
*value = s->read_value;
CS_DBGOUT(CS_AC97, 2,
printk(KERN_INFO "cs4297a: rdr reg %x -> %x\n", s->read_reg, s->read_value));
return 0;
}
//****************************************************************************
// "cs4297a_write_ac97()"-- writes an AC97 register
//****************************************************************************
static int cs4297a_write_ac97(struct cs4297a_state *s, u32 offset,
u32 value)
{
CS_DBGOUT(CS_AC97, 1,
printk(KERN_INFO "cs4297a: write reg %2x -> %04x\n", offset, value));
return (serdma_reg_access(s, (0xELL << 60) | ((u64)(offset & 0x7F) << 40) | ((value & 0xffff) << 12)));
}
static void stop_dac(struct cs4297a_state *s)
{
unsigned long flags;
CS_DBGOUT(CS_WAVE_WRITE, 3, printk(KERN_INFO "cs4297a: stop_dac():\n"));
spin_lock_irqsave(&s->lock, flags);
s->ena &= ~FMODE_WRITE;
#if 0
/* XXXKW what do I really want here? My theory for now is
that I just flip the "ena" bit, and the interrupt handler
will stop processing the xmit channel */
__raw_writeq((s->ena & FMODE_READ) ? M_SYNCSER_DMA_RX_EN : 0,
SS_CSR(R_SER_DMA_ENABLE));
#endif
spin_unlock_irqrestore(&s->lock, flags);
}
static void start_dac(struct cs4297a_state *s)
{
unsigned long flags;
CS_DBGOUT(CS_FUNCTION, 3, printk(KERN_INFO "cs4297a: start_dac()+\n"));
spin_lock_irqsave(&s->lock, flags);
if (!(s->ena & FMODE_WRITE) && (s->dma_dac.mapped ||
(s->dma_dac.count > 0
&& s->dma_dac.ready))) {
s->ena |= FMODE_WRITE;
/* XXXKW what do I really want here? My theory for
now is that I just flip the "ena" bit, and the
interrupt handler will start processing the xmit
channel */
CS_DBGOUT(CS_WAVE_WRITE | CS_PARMS, 8, printk(KERN_INFO
"cs4297a: start_dac(): start dma\n"));
}
spin_unlock_irqrestore(&s->lock, flags);
CS_DBGOUT(CS_FUNCTION, 3,
printk(KERN_INFO "cs4297a: start_dac()-\n"));
}
static void stop_adc(struct cs4297a_state *s)
{
unsigned long flags;
CS_DBGOUT(CS_FUNCTION, 3,
printk(KERN_INFO "cs4297a: stop_adc()+\n"));
spin_lock_irqsave(&s->lock, flags);
s->ena &= ~FMODE_READ;
if (s->conversion == 1) {
s->conversion = 0;
s->prop_adc.fmt = s->prop_adc.fmt_original;
}
/* Nothing to do really, I need to keep the DMA going
XXXKW when do I get here, and is there more I should do? */
spin_unlock_irqrestore(&s->lock, flags);
CS_DBGOUT(CS_FUNCTION, 3,
printk(KERN_INFO "cs4297a: stop_adc()-\n"));
}
static void start_adc(struct cs4297a_state *s)
{
unsigned long flags;
CS_DBGOUT(CS_FUNCTION, 2,
printk(KERN_INFO "cs4297a: start_adc()+\n"));
if (!(s->ena & FMODE_READ) &&
(s->dma_adc.mapped || s->dma_adc.count <=
(signed) (s->dma_adc.sbufsz - 2 * s->dma_adc.fragsize))
&& s->dma_adc.ready) {
if (s->prop_adc.fmt & AFMT_S8 || s->prop_adc.fmt & AFMT_U8) {
//
// now only use 16 bit capture, due to truncation issue
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 01:57:33 +00:00
// in the chip, noticeable distortion occurs.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
// allocate buffer and then convert from 16 bit to
// 8 bit for the user buffer.
//
s->prop_adc.fmt_original = s->prop_adc.fmt;
if (s->prop_adc.fmt & AFMT_S8) {
s->prop_adc.fmt &= ~AFMT_S8;
s->prop_adc.fmt |= AFMT_S16_LE;
}
if (s->prop_adc.fmt & AFMT_U8) {
s->prop_adc.fmt &= ~AFMT_U8;
s->prop_adc.fmt |= AFMT_U16_LE;
}
//
// prog_dmabuf_adc performs a stop_adc() but that is
// ok since we really haven't started the DMA yet.
//
prog_codec(s, CS_TYPE_ADC);
prog_dmabuf_adc(s);
s->conversion = 1;
}
spin_lock_irqsave(&s->lock, flags);
s->ena |= FMODE_READ;
/* Nothing to do really, I am probably already
DMAing... XXXKW when do I get here, and is there
more I should do? */
spin_unlock_irqrestore(&s->lock, flags);
CS_DBGOUT(CS_PARMS, 6, printk(KERN_INFO
"cs4297a: start_adc(): start adc\n"));
}
CS_DBGOUT(CS_FUNCTION, 2,
printk(KERN_INFO "cs4297a: start_adc()-\n"));
}
// call with spinlock held!
static void cs4297a_update_ptr(struct cs4297a_state *s, int intflag)
{
int good_diff, diff, diff2;
u64 *data_p, data;
u32 *s_ptr;
unsigned hwptr;
u32 status;
serdma_t *d;
serdma_descr_t *descr;
// update ADC pointer
status = intflag ? __raw_readq(SS_CSR(R_SER_STATUS)) : 0;
if ((s->ena & FMODE_READ) || (status & (M_SYNCSER_RX_EOP_COUNT))) {
d = &s->dma_adc;
hwptr = (unsigned) (((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_RX)) & M_DMA_CURDSCR_ADDR) -
d->descrtab_phys) / sizeof(serdma_descr_t));
if (s->ena & FMODE_READ) {
CS_DBGOUT(CS_FUNCTION, 2,
printk(KERN_INFO "cs4297a: upd_rcv sw->hw->hw %x/%x/%x (int-%d)n",
d->swptr, d->hwptr, hwptr, intflag));
/* Number of DMA buffers available for software: */
diff2 = diff = (d->ringsz + hwptr - d->hwptr) % d->ringsz;
d->hwptr = hwptr;
good_diff = 0;
s_ptr = (u32 *)&(d->dma_buf[d->swptr*4]);
descr = &d->descrtab[d->swptr];
while (diff2--) {
u64 data = be64_to_cpu(*(u64 *)s_ptr);
u64 descr_a;
u16 left, right;
descr_a = descr->descr_a;
descr->descr_a &= ~M_DMA_SERRX_SOP;
if ((descr_a & M_DMA_DSCRA_A_ADDR) != CPHYSADDR((long)s_ptr)) {
printk(KERN_ERR "cs4297a: RX Bad address (read)\n");
}
if (((data & 0x9800000000000000) != 0x9800000000000000) ||
(!(descr_a & M_DMA_SERRX_SOP)) ||
(G_DMA_DSCRB_PKT_SIZE(descr->descr_b) != FRAME_BYTES)) {
s->stats.rx_bad++;
printk(KERN_DEBUG "cs4297a: RX Bad attributes (read)\n");
continue;
}
s->stats.rx_good++;
if ((data >> 61) == 7) {
s->read_value = (data >> 12) & 0xffff;
s->read_reg = (data >> 40) & 0x7f;
wake_up(&d->reg_wait);
}
if (d->count && (d->sb_hwptr == d->sb_swptr)) {
s->stats.rx_overflow++;
printk(KERN_DEBUG "cs4297a: RX overflow\n");
continue;
}
good_diff++;
left = ((be32_to_cpu(s_ptr[1]) & 0xff) << 8) |
((be32_to_cpu(s_ptr[2]) >> 24) & 0xff);
right = (be32_to_cpu(s_ptr[2]) >> 4) & 0xffff;
*d->sb_hwptr++ = cpu_to_be16(left);
*d->sb_hwptr++ = cpu_to_be16(right);
if (d->sb_hwptr == d->sb_end)
d->sb_hwptr = d->sample_buf;
descr++;
if (descr == d->descrtab_end) {
descr = d->descrtab;
s_ptr = (u32 *)s->dma_adc.dma_buf;
} else {
s_ptr += 8;
}
}
d->total_bytes += good_diff * FRAME_SAMPLE_BYTES;
d->count += good_diff * FRAME_SAMPLE_BYTES;
if (d->count > d->sbufsz) {
printk(KERN_ERR "cs4297a: bogus receive overflow!!\n");
}
d->swptr = (d->swptr + diff) % d->ringsz;
__raw_writeq(diff, SS_CSR(R_SER_DMA_DSCR_COUNT_RX));
if (d->mapped) {
if (d->count >= (signed) d->fragsize)
wake_up(&d->wait);
} else {
if (d->count > 0) {
CS_DBGOUT(CS_WAVE_READ, 4,
printk(KERN_INFO
"cs4297a: update count -> %d\n", d->count));
wake_up(&d->wait);
}
}
} else {
/* Receive is going even if no one is
listening (for register accesses and to
avoid FIFO overrun) */
diff2 = diff = (hwptr + d->ringsz - d->hwptr) % d->ringsz;
if (!diff) {
printk(KERN_ERR "cs4297a: RX full or empty?\n");
}
descr = &d->descrtab[d->swptr];
data_p = &d->dma_buf[d->swptr*4];
/* Force this to happen at least once; I got
here because of an interrupt, so there must
be a buffer to process. */
do {
data = be64_to_cpu(*data_p);
if ((descr->descr_a & M_DMA_DSCRA_A_ADDR) != CPHYSADDR((long)data_p)) {
printk(KERN_ERR "cs4297a: RX Bad address %d (%llx %lx)\n", d->swptr,
(long long)(descr->descr_a & M_DMA_DSCRA_A_ADDR),
(long)CPHYSADDR((long)data_p));
}
if (!(data & (1LL << 63)) ||
!(descr->descr_a & M_DMA_SERRX_SOP) ||
(G_DMA_DSCRB_PKT_SIZE(descr->descr_b) != FRAME_BYTES)) {
s->stats.rx_bad++;
printk(KERN_DEBUG "cs4297a: RX Bad attributes\n");
} else {
s->stats.rx_good++;
if ((data >> 61) == 7) {
s->read_value = (data >> 12) & 0xffff;
s->read_reg = (data >> 40) & 0x7f;
wake_up(&d->reg_wait);
}
}
descr->descr_a &= ~M_DMA_SERRX_SOP;
descr++;
d->swptr++;
data_p += 4;
if (descr == d->descrtab_end) {
descr = d->descrtab;
d->swptr = 0;
data_p = d->dma_buf;
}
__raw_writeq(1, SS_CSR(R_SER_DMA_DSCR_COUNT_RX));
} while (--diff);
d->hwptr = hwptr;
CS_DBGOUT(CS_DESCR, 6,
printk(KERN_INFO "cs4297a: hw/sw %x/%x\n", d->hwptr, d->swptr));
}
CS_DBGOUT(CS_PARMS, 8, printk(KERN_INFO
"cs4297a: cs4297a_update_ptr(): s=0x%.8x hwptr=%d total_bytes=%d count=%d \n",
(unsigned)s, d->hwptr,
d->total_bytes, d->count));
}
/* XXXKW worry about s->reg_request -- there is a starvation
case if s->ena has FMODE_WRITE on, but the client isn't
doing writes */
// update DAC pointer
//
// check for end of buffer, means that we are going to wait for another interrupt
// to allow silence to fill the fifos on the part, to keep pops down to a minimum.
//
if (s->ena & FMODE_WRITE) {
serdma_t *d = &s->dma_dac;
hwptr = (unsigned) (((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_TX)) & M_DMA_CURDSCR_ADDR) -
d->descrtab_phys) / sizeof(serdma_descr_t));
diff = (d->ringsz + hwptr - d->hwptr) % d->ringsz;
CS_DBGOUT(CS_WAVE_WRITE, 4, printk(KERN_INFO
"cs4297a: cs4297a_update_ptr(): hw/hw/sw %x/%x/%x diff %d count %d\n",
d->hwptr, hwptr, d->swptr, diff, d->count));
d->hwptr = hwptr;
/* XXXKW stereo? conversion? Just assume 2 16-bit samples for now */
d->total_bytes += diff * FRAME_SAMPLE_BYTES;
if (d->mapped) {
d->count += diff * FRAME_SAMPLE_BYTES;
if (d->count >= d->fragsize) {
d->wakeup = 1;
wake_up(&d->wait);
if (d->count > d->sbufsz)
d->count &= d->sbufsz - 1;
}
} else {
d->count -= diff * FRAME_SAMPLE_BYTES;
if (d->count <= 0) {
//
// fill with silence, and do not shut down the DAC.
// Continue to play silence until the _release.
//
CS_DBGOUT(CS_WAVE_WRITE, 6, printk(KERN_INFO
"cs4297a: cs4297a_update_ptr(): memset %d at 0x%.8x for %d size \n",
(unsigned)(s->prop_dac.fmt &
(AFMT_U8 | AFMT_U16_LE)) ? 0x80 : 0,
(unsigned)d->dma_buf,
d->ringsz));
memset(d->dma_buf, 0, d->ringsz * FRAME_BYTES);
if (d->count < 0) {
d->underrun = 1;
s->stats.tx_underrun++;
d->count = 0;
CS_DBGOUT(CS_ERROR, 9, printk(KERN_INFO
"cs4297a: cs4297a_update_ptr(): underrun\n"));
}
} else if (d->count <=
(signed) d->fragsize
&& !d->endcleared) {
/* XXXKW what is this for? */
clear_advance(d->dma_buf,
d->sbufsz,
d->swptr,
d->fragsize,
0);
d->endcleared = 1;
}
if ( (d->count <= (signed) d->sbufsz/2) || intflag)
{
CS_DBGOUT(CS_WAVE_WRITE, 4,
printk(KERN_INFO
"cs4297a: update count -> %d\n", d->count));
wake_up(&d->wait);
}
}
CS_DBGOUT(CS_PARMS, 8, printk(KERN_INFO
"cs4297a: cs4297a_update_ptr(): s=0x%.8x hwptr=%d total_bytes=%d count=%d \n",
(unsigned) s, d->hwptr,
d->total_bytes, d->count));
}
}
static int mixer_ioctl(struct cs4297a_state *s, unsigned int cmd,
unsigned long arg)
{
// Index to mixer_src[] is value of AC97 Input Mux Select Reg.
// Value of array member is recording source Device ID Mask.
static const unsigned int mixer_src[8] = {
SOUND_MASK_MIC, SOUND_MASK_CD, 0, SOUND_MASK_LINE1,
SOUND_MASK_LINE, SOUND_MASK_VOLUME, 0, 0
};
// Index of mixtable1[] member is Device ID
// and must be <= SOUND_MIXER_NRDEVICES.
// Value of array member is index into s->mix.vol[]
static const unsigned char mixtable1[SOUND_MIXER_NRDEVICES] = {
[SOUND_MIXER_PCM] = 1, // voice
[SOUND_MIXER_LINE1] = 2, // AUX
[SOUND_MIXER_CD] = 3, // CD
[SOUND_MIXER_LINE] = 4, // Line
[SOUND_MIXER_SYNTH] = 5, // FM
[SOUND_MIXER_MIC] = 6, // Mic
[SOUND_MIXER_SPEAKER] = 7, // Speaker
[SOUND_MIXER_RECLEV] = 8, // Recording level
[SOUND_MIXER_VOLUME] = 9 // Master Volume
};
static const unsigned mixreg[] = {
AC97_PCMOUT_VOL,
AC97_AUX_VOL,
AC97_CD_VOL,
AC97_LINEIN_VOL
};
unsigned char l, r, rl, rr, vidx;
unsigned char attentbl[11] =
{ 63, 42, 26, 17, 14, 11, 8, 6, 4, 2, 0 };
unsigned temp1;
int i, val;
VALIDATE_STATE(s);
CS_DBGOUT(CS_FUNCTION, 4, printk(KERN_INFO
"cs4297a: mixer_ioctl(): s=0x%.8x cmd=0x%.8x\n",
(unsigned) s, cmd));
#if CSDEBUG
cs_printioctl(cmd);
#endif
#if CSDEBUG_INTERFACE
if ((cmd == SOUND_MIXER_CS_GETDBGMASK) ||
(cmd == SOUND_MIXER_CS_SETDBGMASK) ||
(cmd == SOUND_MIXER_CS_GETDBGLEVEL) ||
(cmd == SOUND_MIXER_CS_SETDBGLEVEL))
{
switch (cmd) {
case SOUND_MIXER_CS_GETDBGMASK:
return put_user(cs_debugmask,
(unsigned long *) arg);
case SOUND_MIXER_CS_GETDBGLEVEL:
return put_user(cs_debuglevel,
(unsigned long *) arg);
case SOUND_MIXER_CS_SETDBGMASK:
if (get_user(val, (unsigned long *) arg))
return -EFAULT;
cs_debugmask = val;
return 0;
case SOUND_MIXER_CS_SETDBGLEVEL:
if (get_user(val, (unsigned long *) arg))
return -EFAULT;
cs_debuglevel = val;
return 0;
default:
CS_DBGOUT(CS_ERROR, 1, printk(KERN_INFO
"cs4297a: mixer_ioctl(): ERROR unknown debug cmd\n"));
return 0;
}
}
#endif
if (cmd == SOUND_MIXER_PRIVATE1) {
return -EINVAL;
}
if (cmd == SOUND_MIXER_PRIVATE2) {
// enable/disable/query spatializer
if (get_user(val, (int *) arg))
return -EFAULT;
if (val != -1) {
temp1 = (val & 0x3f) >> 2;
cs4297a_write_ac97(s, AC97_3D_CONTROL, temp1);
cs4297a_read_ac97(s, AC97_GENERAL_PURPOSE,
&temp1);
cs4297a_write_ac97(s, AC97_GENERAL_PURPOSE,
temp1 | 0x2000);
}
cs4297a_read_ac97(s, AC97_3D_CONTROL, &temp1);
return put_user((temp1 << 2) | 3, (int *) arg);
}
if (cmd == SOUND_MIXER_INFO) {
mixer_info info;
memset(&info, 0, sizeof(info));
strlcpy(info.id, "CS4297a", sizeof(info.id));
strlcpy(info.name, "Crystal CS4297a", sizeof(info.name));
info.modify_counter = s->mix.modcnt;
if (copy_to_user((void *) arg, &info, sizeof(info)))
return -EFAULT;
return 0;
}
if (cmd == SOUND_OLD_MIXER_INFO) {
_old_mixer_info info;
memset(&info, 0, sizeof(info));
strlcpy(info.id, "CS4297a", sizeof(info.id));
strlcpy(info.name, "Crystal CS4297a", sizeof(info.name));
if (copy_to_user((void *) arg, &info, sizeof(info)))
return -EFAULT;
return 0;
}
if (cmd == OSS_GETVERSION)
return put_user(SOUND_VERSION, (int *) arg);
if (_IOC_TYPE(cmd) != 'M' || _SIOC_SIZE(cmd) != sizeof(int))
return -EINVAL;
// If ioctl has only the SIOC_READ bit(bit 31)
// on, process the only-read commands.
if (_SIOC_DIR(cmd) == _SIOC_READ) {
switch (_IOC_NR(cmd)) {
case SOUND_MIXER_RECSRC: // Arg contains a bit for each recording source
cs4297a_read_ac97(s, AC97_RECORD_SELECT,
&temp1);
return put_user(mixer_src[temp1 & 7], (int *) arg);
case SOUND_MIXER_DEVMASK: // Arg contains a bit for each supported device
return put_user(SOUND_MASK_PCM | SOUND_MASK_LINE |
SOUND_MASK_VOLUME | SOUND_MASK_RECLEV,
(int *) arg);
case SOUND_MIXER_RECMASK: // Arg contains a bit for each supported recording source
return put_user(SOUND_MASK_LINE | SOUND_MASK_VOLUME,
(int *) arg);
case SOUND_MIXER_STEREODEVS: // Mixer channels supporting stereo
return put_user(SOUND_MASK_PCM | SOUND_MASK_LINE |
SOUND_MASK_VOLUME | SOUND_MASK_RECLEV,
(int *) arg);
case SOUND_MIXER_CAPS:
return put_user(SOUND_CAP_EXCL_INPUT, (int *) arg);
default:
i = _IOC_NR(cmd);
if (i >= SOUND_MIXER_NRDEVICES
|| !(vidx = mixtable1[i]))
return -EINVAL;
return put_user(s->mix.vol[vidx - 1], (int *) arg);
}
}
// If ioctl doesn't have both the SIOC_READ and
// the SIOC_WRITE bit set, return invalid.
if (_SIOC_DIR(cmd) != (_SIOC_READ | _SIOC_WRITE))
return -EINVAL;
// Increment the count of volume writes.
s->mix.modcnt++;
// Isolate the command; it must be a write.
switch (_IOC_NR(cmd)) {
case SOUND_MIXER_RECSRC: // Arg contains a bit for each recording source
if (get_user(val, (int *) arg))
return -EFAULT;
i = hweight32(val); // i = # bits on in val.
if (i != 1) // One & only 1 bit must be on.
return 0;
for (i = 0; i < sizeof(mixer_src) / sizeof(int); i++) {
if (val == mixer_src[i]) {
temp1 = (i << 8) | i;
cs4297a_write_ac97(s,
AC97_RECORD_SELECT,
temp1);
return 0;
}
}
return 0;
case SOUND_MIXER_VOLUME:
if (get_user(val, (int *) arg))
return -EFAULT;
l = val & 0xff;
if (l > 100)
l = 100; // Max soundcard.h vol is 100.
if (l < 6) {
rl = 63;
l = 0;
} else
rl = attentbl[(10 * l) / 100]; // Convert 0-100 vol to 63-0 atten.
r = (val >> 8) & 0xff;
if (r > 100)
r = 100; // Max right volume is 100, too
if (r < 6) {
rr = 63;
r = 0;
} else
rr = attentbl[(10 * r) / 100]; // Convert volume to attenuation.
if ((rl > 60) && (rr > 60)) // If both l & r are 'low',
temp1 = 0x8000; // turn on the mute bit.
else
temp1 = 0;
temp1 |= (rl << 8) | rr;
cs4297a_write_ac97(s, AC97_MASTER_VOL_STEREO, temp1);
cs4297a_write_ac97(s, AC97_PHONE_VOL, temp1);
#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
s->mix.vol[8] = ((unsigned int) r << 8) | l;
#else
s->mix.vol[8] = val;
#endif
return put_user(s->mix.vol[8], (int *) arg);
case SOUND_MIXER_SPEAKER:
if (get_user(val, (int *) arg))
return -EFAULT;
l = val & 0xff;
if (l > 100)
l = 100;
if (l < 3) {
rl = 0;
l = 0;
} else {
rl = (l * 2 - 5) / 13; // Convert 0-100 range to 0-15.
l = (rl * 13 + 5) / 2;
}
if (rl < 3) {
temp1 = 0x8000;
rl = 0;
} else
temp1 = 0;
rl = 15 - rl; // Convert volume to attenuation.
temp1 |= rl << 1;
cs4297a_write_ac97(s, AC97_PCBEEP_VOL, temp1);
#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
s->mix.vol[6] = l << 8;
#else
s->mix.vol[6] = val;
#endif
return put_user(s->mix.vol[6], (int *) arg);
case SOUND_MIXER_RECLEV:
if (get_user(val, (int *) arg))
return -EFAULT;
l = val & 0xff;
if (l > 100)
l = 100;
r = (val >> 8) & 0xff;
if (r > 100)
r = 100;
rl = (l * 2 - 5) / 13; // Convert 0-100 scale to 0-15.
rr = (r * 2 - 5) / 13;
if (rl < 3 && rr < 3)
temp1 = 0x8000;
else
temp1 = 0;
temp1 = temp1 | (rl << 8) | rr;
cs4297a_write_ac97(s, AC97_RECORD_GAIN, temp1);
#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
s->mix.vol[7] = ((unsigned int) r << 8) | l;
#else
s->mix.vol[7] = val;
#endif
return put_user(s->mix.vol[7], (int *) arg);
case SOUND_MIXER_MIC:
if (get_user(val, (int *) arg))
return -EFAULT;
l = val & 0xff;
if (l > 100)
l = 100;
if (l < 1) {
l = 0;
rl = 0;
} else {
rl = ((unsigned) l * 5 - 4) / 16; // Convert 0-100 range to 0-31.
l = (rl * 16 + 4) / 5;
}
cs4297a_read_ac97(s, AC97_MIC_VOL, &temp1);
temp1 &= 0x40; // Isolate 20db gain bit.
if (rl < 3) {
temp1 |= 0x8000;
rl = 0;
}
rl = 31 - rl; // Convert volume to attenuation.
temp1 |= rl;
cs4297a_write_ac97(s, AC97_MIC_VOL, temp1);
#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
s->mix.vol[5] = val << 8;
#else
s->mix.vol[5] = val;
#endif
return put_user(s->mix.vol[5], (int *) arg);
case SOUND_MIXER_SYNTH:
if (get_user(val, (int *) arg))
return -EFAULT;
l = val & 0xff;
if (l > 100)
l = 100;
if (get_user(val, (int *) arg))
return -EFAULT;
r = (val >> 8) & 0xff;
if (r > 100)
r = 100;
rl = (l * 2 - 11) / 3; // Convert 0-100 range to 0-63.
rr = (r * 2 - 11) / 3;
if (rl < 3) // If l is low, turn on
temp1 = 0x0080; // the mute bit.
else
temp1 = 0;
rl = 63 - rl; // Convert vol to attenuation.
// writel(temp1 | rl, s->pBA0 + FMLVC);
if (rr < 3) // If rr is low, turn on
temp1 = 0x0080; // the mute bit.
else
temp1 = 0;
rr = 63 - rr; // Convert vol to attenuation.
// writel(temp1 | rr, s->pBA0 + FMRVC);
#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
s->mix.vol[4] = (r << 8) | l;
#else
s->mix.vol[4] = val;
#endif
return put_user(s->mix.vol[4], (int *) arg);
default:
CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO
"cs4297a: mixer_ioctl(): default\n"));
i = _IOC_NR(cmd);
if (i >= SOUND_MIXER_NRDEVICES || !(vidx = mixtable1[i]))
return -EINVAL;
if (get_user(val, (int *) arg))
return -EFAULT;
l = val & 0xff;
if (l > 100)
l = 100;
if (l < 1) {
l = 0;
rl = 31;
} else
rl = (attentbl[(l * 10) / 100]) >> 1;
r = (val >> 8) & 0xff;
if (r > 100)
r = 100;
if (r < 1) {
r = 0;
rr = 31;
} else
rr = (attentbl[(r * 10) / 100]) >> 1;
if ((rl > 30) && (rr > 30))
temp1 = 0x8000;
else
temp1 = 0;
temp1 = temp1 | (rl << 8) | rr;
cs4297a_write_ac97(s, mixreg[vidx - 1], temp1);
#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
s->mix.vol[vidx - 1] = ((unsigned int) r << 8) | l;
#else
s->mix.vol[vidx - 1] = val;
#endif
return put_user(s->mix.vol[vidx - 1], (int *) arg);
}
}
// ---------------------------------------------------------------------
static int cs4297a_open_mixdev(struct inode *inode, struct file *file)
{
int minor = iminor(inode);
struct cs4297a_state *s=NULL;
struct list_head *entry;
CS_DBGOUT(CS_FUNCTION | CS_OPEN, 4,
printk(KERN_INFO "cs4297a: cs4297a_open_mixdev()+\n"));
sound: autoconvert trivial BKL users to private mutex The usage of the BKL in the OSS sound drivers is trivial, and each of them only locks against itself, so it can be turned into per-driver mutexes. This is the script that was used for the conversion: file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-14 19:53:41 +00:00
mutex_lock(&swarm_cs4297a_mutex);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
list_for_each(entry, &cs4297a_devs)
{
s = list_entry(entry, struct cs4297a_state, list);
if(s->dev_mixer == minor)
break;
}
if (!s)
{
CS_DBGOUT(CS_FUNCTION | CS_OPEN | CS_ERROR, 2,
printk(KERN_INFO "cs4297a: cs4297a_open_mixdev()- -ENODEV\n"));
sound: push BKL into open functions This moves the lock_kernel() call from soundcore_open to the individual OSS device drivers, where we can deal with it one driver at a time if needed, or just kill off the drivers. All core components in ALSA already provide adequate locking in their open()-functions and do not require the big kernel lock, so there is no need to add the BKL there. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-11 10:16:36 +00:00
sound: autoconvert trivial BKL users to private mutex The usage of the BKL in the OSS sound drivers is trivial, and each of them only locks against itself, so it can be turned into per-driver mutexes. This is the script that was used for the conversion: file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-14 19:53:41 +00:00
mutex_unlock(&swarm_cs4297a_mutex);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -ENODEV;
}
VALIDATE_STATE(s);
file->private_data = s;
CS_DBGOUT(CS_FUNCTION | CS_OPEN, 4,
printk(KERN_INFO "cs4297a: cs4297a_open_mixdev()- 0\n"));
sound: autoconvert trivial BKL users to private mutex The usage of the BKL in the OSS sound drivers is trivial, and each of them only locks against itself, so it can be turned into per-driver mutexes. This is the script that was used for the conversion: file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-14 19:53:41 +00:00
mutex_unlock(&swarm_cs4297a_mutex);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return nonseekable_open(inode, file);
}
static int cs4297a_release_mixdev(struct inode *inode, struct file *file)
{
struct cs4297a_state *s =
(struct cs4297a_state *) file->private_data;
VALIDATE_STATE(s);
return 0;
}
sound/oss: convert to unlocked_ioctl These are the final conversions for the ioctl file operation so we can remove it in the next merge window. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-12 17:53:18 +00:00
static int cs4297a_ioctl_mixdev(struct file *file,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
unsigned int cmd, unsigned long arg)
{
sound/oss: convert to unlocked_ioctl These are the final conversions for the ioctl file operation so we can remove it in the next merge window. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-12 17:53:18 +00:00
int ret;
sound: autoconvert trivial BKL users to private mutex The usage of the BKL in the OSS sound drivers is trivial, and each of them only locks against itself, so it can be turned into per-driver mutexes. This is the script that was used for the conversion: file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-14 19:53:41 +00:00
mutex_lock(&swarm_cs4297a_mutex);
sound/oss: convert to unlocked_ioctl These are the final conversions for the ioctl file operation so we can remove it in the next merge window. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-12 17:53:18 +00:00
ret = mixer_ioctl((struct cs4297a_state *) file->private_data, cmd,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
arg);
sound: autoconvert trivial BKL users to private mutex The usage of the BKL in the OSS sound drivers is trivial, and each of them only locks against itself, so it can be turned into per-driver mutexes. This is the script that was used for the conversion: file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-14 19:53:41 +00:00
mutex_unlock(&swarm_cs4297a_mutex);
sound/oss: convert to unlocked_ioctl These are the final conversions for the ioctl file operation so we can remove it in the next merge window. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-12 17:53:18 +00:00
return ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
// ******************************************************************************************
// Mixer file operations struct.
// ******************************************************************************************
OSS: constify function pointer tables Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:21:20 +00:00
static const struct file_operations cs4297a_mixer_fops = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.owner = THIS_MODULE,
.llseek = no_llseek,
sound/oss: convert to unlocked_ioctl These are the final conversions for the ioctl file operation so we can remove it in the next merge window. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-12 17:53:18 +00:00
.unlocked_ioctl = cs4297a_ioctl_mixdev,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.open = cs4297a_open_mixdev,
.release = cs4297a_release_mixdev,
};
// ---------------------------------------------------------------------
static int drain_adc(struct cs4297a_state *s, int nonblock)
{
/* This routine serves no purpose currently - any samples
sitting in the receive queue will just be processed by the
background consumer. This would be different if DMA
actually stopped when there were no clients. */
return 0;
}
static int drain_dac(struct cs4297a_state *s, int nonblock)
{
DECLARE_WAITQUEUE(wait, current);
unsigned long flags;
unsigned hwptr;
unsigned tmo;
int count;
if (s->dma_dac.mapped)
return 0;
if (nonblock)
return -EBUSY;
add_wait_queue(&s->dma_dac.wait, &wait);
while ((count = __raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_TX))) ||
(s->dma_dac.count > 0)) {
if (!signal_pending(current)) {
set_current_state(TASK_INTERRUPTIBLE);
/* XXXKW is this calculation working? */
tmo = ((count * FRAME_TX_US) * HZ) / 1000000;
schedule_timeout(tmo + 1);
} else {
/* XXXKW do I care if there is a signal pending? */
}
}
spin_lock_irqsave(&s->lock, flags);
/* Reset the bookkeeping */
hwptr = (int)(((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_TX)) & M_DMA_CURDSCR_ADDR) -
s->dma_dac.descrtab_phys) / sizeof(serdma_descr_t));
s->dma_dac.hwptr = s->dma_dac.swptr = hwptr;
spin_unlock_irqrestore(&s->lock, flags);
remove_wait_queue(&s->dma_dac.wait, &wait);
current->state = TASK_RUNNING;
return 0;
}
// ---------------------------------------------------------------------
static ssize_t cs4297a_read(struct file *file, char *buffer, size_t count,
loff_t * ppos)
{
struct cs4297a_state *s =
(struct cs4297a_state *) file->private_data;
ssize_t ret;
unsigned long flags;
int cnt, count_fr, cnt_by;
unsigned copied = 0;
CS_DBGOUT(CS_FUNCTION | CS_WAVE_READ, 2,
printk(KERN_INFO "cs4297a: cs4297a_read()+ %d \n", count));
VALIDATE_STATE(s);
if (s->dma_adc.mapped)
return -ENXIO;
if (!s->dma_adc.ready && (ret = prog_dmabuf_adc(s)))
return ret;
if (!access_ok(VERIFY_WRITE, buffer, count))
return -EFAULT;
ret = 0;
//
// "count" is the amount of bytes to read (from app), is decremented each loop
// by the amount of bytes that have been returned to the user buffer.
// "cnt" is the running total of each read from the buffer (changes each loop)
// "buffer" points to the app's buffer
// "ret" keeps a running total of the amount of bytes that have been copied
// to the user buffer.
// "copied" is the total bytes copied into the user buffer for each loop.
//
while (count > 0) {
CS_DBGOUT(CS_WAVE_READ, 8, printk(KERN_INFO
"_read() count>0 count=%d .count=%d .swptr=%d .hwptr=%d \n",
count, s->dma_adc.count,
s->dma_adc.swptr, s->dma_adc.hwptr));
spin_lock_irqsave(&s->lock, flags);
/* cnt will be the number of available samples (16-bit
stereo); it starts out as the maxmimum consequetive
samples */
cnt = (s->dma_adc.sb_end - s->dma_adc.sb_swptr) / 2;
count_fr = s->dma_adc.count / FRAME_SAMPLE_BYTES;
// dma_adc.count is the current total bytes that have not been read.
// if the amount of unread bytes from the current sw pointer to the
// end of the buffer is greater than the current total bytes that
// have not been read, then set the "cnt" (unread bytes) to the
// amount of unread bytes.
if (count_fr < cnt)
cnt = count_fr;
cnt_by = cnt * FRAME_SAMPLE_BYTES;
spin_unlock_irqrestore(&s->lock, flags);
//
// if we are converting from 8/16 then we need to copy
// twice the number of 16 bit bytes then 8 bit bytes.
//
if (s->conversion) {
if (cnt_by > (count * 2)) {
cnt = (count * 2) / FRAME_SAMPLE_BYTES;
cnt_by = count * 2;
}
} else {
if (cnt_by > count) {
cnt = count / FRAME_SAMPLE_BYTES;
cnt_by = count;
}
}
//
// "cnt" NOW is the smaller of the amount that will be read,
// and the amount that is requested in this read (or partial).
// if there are no bytes in the buffer to read, then start the
// ADC and wait for the interrupt handler to wake us up.
//
if (cnt <= 0) {
// start up the dma engine and then continue back to the top of
// the loop when wake up occurs.
start_adc(s);
if (file->f_flags & O_NONBLOCK)
return ret ? ret : -EAGAIN;
interruptible_sleep_on(&s->dma_adc.wait);
if (signal_pending(current))
return ret ? ret : -ERESTARTSYS;
continue;
}
// there are bytes in the buffer to read.
// copy from the hw buffer over to the user buffer.
// user buffer is designated by "buffer"
// virtual address to copy from is dma_buf+swptr
// the "cnt" is the number of bytes to read.
CS_DBGOUT(CS_WAVE_READ, 2, printk(KERN_INFO
"_read() copy_to cnt=%d count=%d ", cnt_by, count));
CS_DBGOUT(CS_WAVE_READ, 8, printk(KERN_INFO
" .sbufsz=%d .count=%d buffer=0x%.8x ret=%d\n",
s->dma_adc.sbufsz, s->dma_adc.count,
(unsigned) buffer, ret));
if (copy_to_user (buffer, ((void *)s->dma_adc.sb_swptr), cnt_by))
return ret ? ret : -EFAULT;
copied = cnt_by;
/* Return the descriptors */
spin_lock_irqsave(&s->lock, flags);
CS_DBGOUT(CS_FUNCTION, 2,
printk(KERN_INFO "cs4297a: upd_rcv sw->hw %x/%x\n", s->dma_adc.swptr, s->dma_adc.hwptr));
s->dma_adc.count -= cnt_by;
s->dma_adc.sb_swptr += cnt * 2;
if (s->dma_adc.sb_swptr == s->dma_adc.sb_end)
s->dma_adc.sb_swptr = s->dma_adc.sample_buf;
spin_unlock_irqrestore(&s->lock, flags);
count -= copied;
buffer += copied;
ret += copied;
start_adc(s);
}
CS_DBGOUT(CS_FUNCTION | CS_WAVE_READ, 2,
printk(KERN_INFO "cs4297a: cs4297a_read()- %d\n", ret));
return ret;
}
static ssize_t cs4297a_write(struct file *file, const char *buffer,
size_t count, loff_t * ppos)
{
struct cs4297a_state *s =
(struct cs4297a_state *) file->private_data;
ssize_t ret;
unsigned long flags;
unsigned swptr, hwptr;
int cnt;
CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE, 2,
printk(KERN_INFO "cs4297a: cs4297a_write()+ count=%d\n",
count));
VALIDATE_STATE(s);
if (s->dma_dac.mapped)
return -ENXIO;
if (!s->dma_dac.ready && (ret = prog_dmabuf_dac(s)))
return ret;
if (!access_ok(VERIFY_READ, buffer, count))
return -EFAULT;
ret = 0;
while (count > 0) {
serdma_t *d = &s->dma_dac;
int copy_cnt;
u32 *s_tmpl;
u32 *t_tmpl;
u32 left, right;
int swap = (s->prop_dac.fmt == AFMT_S16_LE) || (s->prop_dac.fmt == AFMT_U16_LE);
/* XXXXXX this is broken for BLOAT_FACTOR */
spin_lock_irqsave(&s->lock, flags);
if (d->count < 0) {
d->count = 0;
d->swptr = d->hwptr;
}
if (d->underrun) {
d->underrun = 0;
hwptr = (unsigned) (((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_TX)) & M_DMA_CURDSCR_ADDR) -
d->descrtab_phys) / sizeof(serdma_descr_t));
d->swptr = d->hwptr = hwptr;
}
swptr = d->swptr;
cnt = d->sbufsz - (swptr * FRAME_SAMPLE_BYTES);
/* Will this write fill up the buffer? */
if (d->count + cnt > d->sbufsz)
cnt = d->sbufsz - d->count;
spin_unlock_irqrestore(&s->lock, flags);
if (cnt > count)
cnt = count;
if (cnt <= 0) {
start_dac(s);
if (file->f_flags & O_NONBLOCK)
return ret ? ret : -EAGAIN;
interruptible_sleep_on(&d->wait);
if (signal_pending(current))
return ret ? ret : -ERESTARTSYS;
continue;
}
if (copy_from_user(d->sample_buf, buffer, cnt))
return ret ? ret : -EFAULT;
copy_cnt = cnt;
s_tmpl = (u32 *)d->sample_buf;
t_tmpl = (u32 *)(d->dma_buf + (swptr * 4));
/* XXXKW assuming 16-bit stereo! */
do {
u32 tmp;
t_tmpl[0] = cpu_to_be32(0x98000000);
tmp = be32_to_cpu(s_tmpl[0]);
left = tmp & 0xffff;
right = tmp >> 16;
if (swap) {
left = swab16(left);
right = swab16(right);
}
t_tmpl[1] = cpu_to_be32(left >> 8);
t_tmpl[2] = cpu_to_be32(((left & 0xff) << 24) |
(right << 4));
s_tmpl++;
t_tmpl += 8;
copy_cnt -= 4;
} while (copy_cnt);
/* Mux in any pending read/write accesses */
if (s->reg_request) {
*(u64 *)(d->dma_buf + (swptr * 4)) |=
cpu_to_be64(s->reg_request);
s->reg_request = 0;
wake_up(&s->dma_dac.reg_wait);
}
CS_DBGOUT(CS_WAVE_WRITE, 4,
printk(KERN_INFO
"cs4297a: copy in %d to swptr %x\n", cnt, swptr));
swptr = (swptr + (cnt/FRAME_SAMPLE_BYTES)) % d->ringsz;
__raw_writeq(cnt/FRAME_SAMPLE_BYTES, SS_CSR(R_SER_DMA_DSCR_COUNT_TX));
spin_lock_irqsave(&s->lock, flags);
d->swptr = swptr;
d->count += cnt;
d->endcleared = 0;
spin_unlock_irqrestore(&s->lock, flags);
count -= cnt;
buffer += cnt;
ret += cnt;
start_dac(s);
}
CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE, 2,
printk(KERN_INFO "cs4297a: cs4297a_write()- %d\n", ret));
return ret;
}
static unsigned int cs4297a_poll(struct file *file,
struct poll_table_struct *wait)
{
struct cs4297a_state *s =
(struct cs4297a_state *) file->private_data;
unsigned long flags;
unsigned int mask = 0;
CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4,
printk(KERN_INFO "cs4297a: cs4297a_poll()+\n"));
VALIDATE_STATE(s);
if (file->f_mode & FMODE_WRITE) {
CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4,
printk(KERN_INFO
"cs4297a: cs4297a_poll() wait on FMODE_WRITE\n"));
if(!s->dma_dac.ready && prog_dmabuf_dac(s))
return 0;
poll_wait(file, &s->dma_dac.wait, wait);
}
if (file->f_mode & FMODE_READ) {
CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4,
printk(KERN_INFO
"cs4297a: cs4297a_poll() wait on FMODE_READ\n"));
if(!s->dma_dac.ready && prog_dmabuf_adc(s))
return 0;
poll_wait(file, &s->dma_adc.wait, wait);
}
spin_lock_irqsave(&s->lock, flags);
cs4297a_update_ptr(s,CS_FALSE);
if (file->f_mode & FMODE_WRITE) {
if (s->dma_dac.mapped) {
if (s->dma_dac.count >=
(signed) s->dma_dac.fragsize) {
if (s->dma_dac.wakeup)
mask |= POLLOUT | POLLWRNORM;
else
mask = 0;
s->dma_dac.wakeup = 0;
}
} else {
if ((signed) (s->dma_dac.sbufsz/2) >= s->dma_dac.count)
mask |= POLLOUT | POLLWRNORM;
}
} else if (file->f_mode & FMODE_READ) {
if (s->dma_adc.mapped) {
if (s->dma_adc.count >= (signed) s->dma_adc.fragsize)
mask |= POLLIN | POLLRDNORM;
} else {
if (s->dma_adc.count > 0)
mask |= POLLIN | POLLRDNORM;
}
}
spin_unlock_irqrestore(&s->lock, flags);
CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4,
printk(KERN_INFO "cs4297a: cs4297a_poll()- 0x%.8x\n",
mask));
return mask;
}
static int cs4297a_mmap(struct file *file, struct vm_area_struct *vma)
{
/* XXXKW currently no mmap support */
return -EINVAL;
return 0;
}
sound/oss: convert to unlocked_ioctl These are the final conversions for the ioctl file operation so we can remove it in the next merge window. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-12 17:53:18 +00:00
static int cs4297a_ioctl(struct file *file,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
unsigned int cmd, unsigned long arg)
{
struct cs4297a_state *s =
(struct cs4297a_state *) file->private_data;
unsigned long flags;
audio_buf_info abinfo;
count_info cinfo;
int val, mapped, ret;
CS_DBGOUT(CS_FUNCTION|CS_IOCTL, 4, printk(KERN_INFO
"cs4297a: cs4297a_ioctl(): file=0x%.8x cmd=0x%.8x\n",
(unsigned) file, cmd));
#if CSDEBUG
cs_printioctl(cmd);
#endif
VALIDATE_STATE(s);
mapped = ((file->f_mode & FMODE_WRITE) && s->dma_dac.mapped) ||
((file->f_mode & FMODE_READ) && s->dma_adc.mapped);
switch (cmd) {
case OSS_GETVERSION:
CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
"cs4297a: cs4297a_ioctl(): SOUND_VERSION=0x%.8x\n",
SOUND_VERSION));
return put_user(SOUND_VERSION, (int *) arg);
case SNDCTL_DSP_SYNC:
CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO
"cs4297a: cs4297a_ioctl(): DSP_SYNC\n"));
if (file->f_mode & FMODE_WRITE)
return drain_dac(s,
0 /*file->f_flags & O_NONBLOCK */
);
return 0;
case SNDCTL_DSP_SETDUPLEX:
return 0;
case SNDCTL_DSP_GETCAPS:
return put_user(DSP_CAP_DUPLEX | DSP_CAP_REALTIME |
DSP_CAP_TRIGGER | DSP_CAP_MMAP,
(int *) arg);
case SNDCTL_DSP_RESET:
CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO
"cs4297a: cs4297a_ioctl(): DSP_RESET\n"));
if (file->f_mode & FMODE_WRITE) {
stop_dac(s);
synchronize_irq(s->irq);
s->dma_dac.count = s->dma_dac.total_bytes =
s->dma_dac.blocks = s->dma_dac.wakeup = 0;
s->dma_dac.swptr = s->dma_dac.hwptr =
(int)(((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_TX)) & M_DMA_CURDSCR_ADDR) -
s->dma_dac.descrtab_phys) / sizeof(serdma_descr_t));
}
if (file->f_mode & FMODE_READ) {
stop_adc(s);
synchronize_irq(s->irq);
s->dma_adc.count = s->dma_adc.total_bytes =
s->dma_adc.blocks = s->dma_dac.wakeup = 0;
s->dma_adc.swptr = s->dma_adc.hwptr =
(int)(((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_RX)) & M_DMA_CURDSCR_ADDR) -
s->dma_adc.descrtab_phys) / sizeof(serdma_descr_t));
}
return 0;
case SNDCTL_DSP_SPEED:
if (get_user(val, (int *) arg))
return -EFAULT;
CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
"cs4297a: cs4297a_ioctl(): DSP_SPEED val=%d -> 48000\n", val));
val = 48000;
return put_user(val, (int *) arg);
case SNDCTL_DSP_STEREO:
if (get_user(val, (int *) arg))
return -EFAULT;
CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
"cs4297a: cs4297a_ioctl(): DSP_STEREO val=%d\n", val));
if (file->f_mode & FMODE_READ) {
stop_adc(s);
s->dma_adc.ready = 0;
s->prop_adc.channels = val ? 2 : 1;
}
if (file->f_mode & FMODE_WRITE) {
stop_dac(s);
s->dma_dac.ready = 0;
s->prop_dac.channels = val ? 2 : 1;
}
return 0;
case SNDCTL_DSP_CHANNELS:
if (get_user(val, (int *) arg))
return -EFAULT;
CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
"cs4297a: cs4297a_ioctl(): DSP_CHANNELS val=%d\n",
val));
if (val != 0) {
if (file->f_mode & FMODE_READ) {
stop_adc(s);
s->dma_adc.ready = 0;
if (val >= 2)
s->prop_adc.channels = 2;
else
s->prop_adc.channels = 1;
}
if (file->f_mode & FMODE_WRITE) {
stop_dac(s);
s->dma_dac.ready = 0;
if (val >= 2)
s->prop_dac.channels = 2;
else
s->prop_dac.channels = 1;
}
}
if (file->f_mode & FMODE_WRITE)
val = s->prop_dac.channels;
else if (file->f_mode & FMODE_READ)
val = s->prop_adc.channels;
return put_user(val, (int *) arg);
case SNDCTL_DSP_GETFMTS: // Returns a mask
CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
"cs4297a: cs4297a_ioctl(): DSP_GETFMT val=0x%.8x\n",
AFMT_S16_LE | AFMT_U16_LE | AFMT_S8 |
AFMT_U8));
return put_user(AFMT_S16_LE | AFMT_U16_LE | AFMT_S8 |
AFMT_U8, (int *) arg);
case SNDCTL_DSP_SETFMT:
if (get_user(val, (int *) arg))
return -EFAULT;
CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
"cs4297a: cs4297a_ioctl(): DSP_SETFMT val=0x%.8x\n",
val));
if (val != AFMT_QUERY) {
if (file->f_mode & FMODE_READ) {
stop_adc(s);
s->dma_adc.ready = 0;
if (val != AFMT_S16_LE
&& val != AFMT_U16_LE && val != AFMT_S8
&& val != AFMT_U8)
val = AFMT_U8;
s->prop_adc.fmt = val;
s->prop_adc.fmt_original = s->prop_adc.fmt;
}
if (file->f_mode & FMODE_WRITE) {
stop_dac(s);
s->dma_dac.ready = 0;
if (val != AFMT_S16_LE
&& val != AFMT_U16_LE && val != AFMT_S8
&& val != AFMT_U8)
val = AFMT_U8;
s->prop_dac.fmt = val;
s->prop_dac.fmt_original = s->prop_dac.fmt;
}
} else {
if (file->f_mode & FMODE_WRITE)
val = s->prop_dac.fmt_original;
else if (file->f_mode & FMODE_READ)
val = s->prop_adc.fmt_original;
}
CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
"cs4297a: cs4297a_ioctl(): DSP_SETFMT return val=0x%.8x\n",
val));
return put_user(val, (int *) arg);
case SNDCTL_DSP_POST:
CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO
"cs4297a: cs4297a_ioctl(): DSP_POST\n"));
return 0;
case SNDCTL_DSP_GETTRIGGER:
val = 0;
if (file->f_mode & s->ena & FMODE_READ)
val |= PCM_ENABLE_INPUT;
if (file->f_mode & s->ena & FMODE_WRITE)
val |= PCM_ENABLE_OUTPUT;
return put_user(val, (int *) arg);
case SNDCTL_DSP_SETTRIGGER:
if (get_user(val, (int *) arg))
return -EFAULT;
if (file->f_mode & FMODE_READ) {
if (val & PCM_ENABLE_INPUT) {
if (!s->dma_adc.ready
&& (ret = prog_dmabuf_adc(s)))
return ret;
start_adc(s);
} else
stop_adc(s);
}
if (file->f_mode & FMODE_WRITE) {
if (val & PCM_ENABLE_OUTPUT) {
if (!s->dma_dac.ready
&& (ret = prog_dmabuf_dac(s)))
return ret;
start_dac(s);
} else
stop_dac(s);
}
return 0;
case SNDCTL_DSP_GETOSPACE:
if (!(file->f_mode & FMODE_WRITE))
return -EINVAL;
if (!s->dma_dac.ready && (val = prog_dmabuf_dac(s)))
return val;
spin_lock_irqsave(&s->lock, flags);
cs4297a_update_ptr(s,CS_FALSE);
abinfo.fragsize = s->dma_dac.fragsize;
if (s->dma_dac.mapped)
abinfo.bytes = s->dma_dac.sbufsz;
else
abinfo.bytes =
s->dma_dac.sbufsz - s->dma_dac.count;
abinfo.fragstotal = s->dma_dac.numfrag;
abinfo.fragments = abinfo.bytes >> s->dma_dac.fragshift;
CS_DBGOUT(CS_FUNCTION | CS_PARMS, 4, printk(KERN_INFO
"cs4297a: cs4297a_ioctl(): GETOSPACE .fragsize=%d .bytes=%d .fragstotal=%d .fragments=%d\n",
abinfo.fragsize,abinfo.bytes,abinfo.fragstotal,
abinfo.fragments));
spin_unlock_irqrestore(&s->lock, flags);
return copy_to_user((void *) arg, &abinfo,
sizeof(abinfo)) ? -EFAULT : 0;
case SNDCTL_DSP_GETISPACE:
if (!(file->f_mode & FMODE_READ))
return -EINVAL;
if (!s->dma_adc.ready && (val = prog_dmabuf_adc(s)))
return val;
spin_lock_irqsave(&s->lock, flags);
cs4297a_update_ptr(s,CS_FALSE);
if (s->conversion) {
abinfo.fragsize = s->dma_adc.fragsize / 2;
abinfo.bytes = s->dma_adc.count / 2;
abinfo.fragstotal = s->dma_adc.numfrag;
abinfo.fragments =
abinfo.bytes >> (s->dma_adc.fragshift - 1);
} else {
abinfo.fragsize = s->dma_adc.fragsize;
abinfo.bytes = s->dma_adc.count;
abinfo.fragstotal = s->dma_adc.numfrag;
abinfo.fragments =
abinfo.bytes >> s->dma_adc.fragshift;
}
spin_unlock_irqrestore(&s->lock, flags);
return copy_to_user((void *) arg, &abinfo,
sizeof(abinfo)) ? -EFAULT : 0;
case SNDCTL_DSP_NONBLOCK:
Use f_lock to protect f_flags Traditionally, changes to struct file->f_flags have been done under BKL protection, or with no protection at all. This patch causes all f_flags changes after file open/creation time to be done under protection of f_lock. This allows the removal of some BKL usage and fixes a number of longstanding (if microscopic) races. Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2009-02-06 22:25:24 +00:00
spin_lock(&file->f_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
file->f_flags |= O_NONBLOCK;
Use f_lock to protect f_flags Traditionally, changes to struct file->f_flags have been done under BKL protection, or with no protection at all. This patch causes all f_flags changes after file open/creation time to be done under protection of f_lock. This allows the removal of some BKL usage and fixes a number of longstanding (if microscopic) races. Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2009-02-06 22:25:24 +00:00
spin_unlock(&file->f_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return 0;
case SNDCTL_DSP_GETODELAY:
if (!(file->f_mode & FMODE_WRITE))
return -EINVAL;
if(!s->dma_dac.ready && prog_dmabuf_dac(s))
return 0;
spin_lock_irqsave(&s->lock, flags);
cs4297a_update_ptr(s,CS_FALSE);
val = s->dma_dac.count;
spin_unlock_irqrestore(&s->lock, flags);
return put_user(val, (int *) arg);
case SNDCTL_DSP_GETIPTR:
if (!(file->f_mode & FMODE_READ))
return -EINVAL;
if(!s->dma_adc.ready && prog_dmabuf_adc(s))
return 0;
spin_lock_irqsave(&s->lock, flags);
cs4297a_update_ptr(s,CS_FALSE);
cinfo.bytes = s->dma_adc.total_bytes;
if (s->dma_adc.mapped) {
cinfo.blocks =
(cinfo.bytes >> s->dma_adc.fragshift) -
s->dma_adc.blocks;
s->dma_adc.blocks =
cinfo.bytes >> s->dma_adc.fragshift;
} else {
if (s->conversion) {
cinfo.blocks =
s->dma_adc.count /
2 >> (s->dma_adc.fragshift - 1);
} else
cinfo.blocks =
s->dma_adc.count >> s->dma_adc.
fragshift;
}
if (s->conversion)
cinfo.ptr = s->dma_adc.hwptr / 2;
else
cinfo.ptr = s->dma_adc.hwptr;
if (s->dma_adc.mapped)
s->dma_adc.count &= s->dma_adc.fragsize - 1;
spin_unlock_irqrestore(&s->lock, flags);
return copy_to_user((void *) arg, &cinfo, sizeof(cinfo)) ? -EFAULT : 0;
case SNDCTL_DSP_GETOPTR:
if (!(file->f_mode & FMODE_WRITE))
return -EINVAL;
if(!s->dma_dac.ready && prog_dmabuf_dac(s))
return 0;
spin_lock_irqsave(&s->lock, flags);
cs4297a_update_ptr(s,CS_FALSE);
cinfo.bytes = s->dma_dac.total_bytes;
if (s->dma_dac.mapped) {
cinfo.blocks =
(cinfo.bytes >> s->dma_dac.fragshift) -
s->dma_dac.blocks;
s->dma_dac.blocks =
cinfo.bytes >> s->dma_dac.fragshift;
} else {
cinfo.blocks =
s->dma_dac.count >> s->dma_dac.fragshift;
}
cinfo.ptr = s->dma_dac.hwptr;
if (s->dma_dac.mapped)
s->dma_dac.count &= s->dma_dac.fragsize - 1;
spin_unlock_irqrestore(&s->lock, flags);
return copy_to_user((void *) arg, &cinfo, sizeof(cinfo)) ? -EFAULT : 0;
case SNDCTL_DSP_GETBLKSIZE:
if (file->f_mode & FMODE_WRITE) {
if ((val = prog_dmabuf_dac(s)))
return val;
return put_user(s->dma_dac.fragsize, (int *) arg);
}
if ((val = prog_dmabuf_adc(s)))
return val;
if (s->conversion)
return put_user(s->dma_adc.fragsize / 2,
(int *) arg);
else
return put_user(s->dma_adc.fragsize, (int *) arg);
case SNDCTL_DSP_SETFRAGMENT:
if (get_user(val, (int *) arg))
return -EFAULT;
return 0; // Say OK, but do nothing.
case SNDCTL_DSP_SUBDIVIDE:
if ((file->f_mode & FMODE_READ && s->dma_adc.subdivision)
|| (file->f_mode & FMODE_WRITE
&& s->dma_dac.subdivision)) return -EINVAL;
if (get_user(val, (int *) arg))
return -EFAULT;
if (val != 1 && val != 2 && val != 4)
return -EINVAL;
if (file->f_mode & FMODE_READ)
s->dma_adc.subdivision = val;
else if (file->f_mode & FMODE_WRITE)
s->dma_dac.subdivision = val;
return 0;
case SOUND_PCM_READ_RATE:
if (file->f_mode & FMODE_READ)
return put_user(s->prop_adc.rate, (int *) arg);
else if (file->f_mode & FMODE_WRITE)
return put_user(s->prop_dac.rate, (int *) arg);
case SOUND_PCM_READ_CHANNELS:
if (file->f_mode & FMODE_READ)
return put_user(s->prop_adc.channels, (int *) arg);
else if (file->f_mode & FMODE_WRITE)
return put_user(s->prop_dac.channels, (int *) arg);
case SOUND_PCM_READ_BITS:
if (file->f_mode & FMODE_READ)
return
put_user(
(s->prop_adc.
fmt & (AFMT_S8 | AFMT_U8)) ? 8 : 16,
(int *) arg);
else if (file->f_mode & FMODE_WRITE)
return
put_user(
(s->prop_dac.
fmt & (AFMT_S8 | AFMT_U8)) ? 8 : 16,
(int *) arg);
case SOUND_PCM_WRITE_FILTER:
case SNDCTL_DSP_SETSYNCRO:
case SOUND_PCM_READ_FILTER:
return -EINVAL;
}
return mixer_ioctl(s, cmd, arg);
}
sound/oss: convert to unlocked_ioctl These are the final conversions for the ioctl file operation so we can remove it in the next merge window. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-12 17:53:18 +00:00
static long cs4297a_unlocked_ioctl(struct file *file, u_int cmd, u_long arg)
{
int ret;
sound: autoconvert trivial BKL users to private mutex The usage of the BKL in the OSS sound drivers is trivial, and each of them only locks against itself, so it can be turned into per-driver mutexes. This is the script that was used for the conversion: file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-14 19:53:41 +00:00
mutex_lock(&swarm_cs4297a_mutex);
sound/oss: convert to unlocked_ioctl These are the final conversions for the ioctl file operation so we can remove it in the next merge window. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-12 17:53:18 +00:00
ret = cs4297a_ioctl(file, cmd, arg);
sound: autoconvert trivial BKL users to private mutex The usage of the BKL in the OSS sound drivers is trivial, and each of them only locks against itself, so it can be turned into per-driver mutexes. This is the script that was used for the conversion: file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-14 19:53:41 +00:00
mutex_unlock(&swarm_cs4297a_mutex);
sound/oss: convert to unlocked_ioctl These are the final conversions for the ioctl file operation so we can remove it in the next merge window. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-12 17:53:18 +00:00
return ret;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static int cs4297a_release(struct inode *inode, struct file *file)
{
struct cs4297a_state *s =
(struct cs4297a_state *) file->private_data;
CS_DBGOUT(CS_FUNCTION | CS_RELEASE, 2, printk(KERN_INFO
"cs4297a: cs4297a_release(): inode=0x%.8x file=0x%.8x f_mode=0x%x\n",
(unsigned) inode, (unsigned) file, file->f_mode));
VALIDATE_STATE(s);
if (file->f_mode & FMODE_WRITE) {
drain_dac(s, file->f_flags & O_NONBLOCK);
[PATCH] sem2mutex: sound/oss/ Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 11:00:39 +00:00
mutex_lock(&s->open_sem_dac);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
stop_dac(s);
dealloc_dmabuf(s, &s->dma_dac);
s->open_mode &= ~FMODE_WRITE;
[PATCH] sem2mutex: sound/oss/ Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 11:00:39 +00:00
mutex_unlock(&s->open_sem_dac);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
wake_up(&s->open_wait_dac);
}
if (file->f_mode & FMODE_READ) {
drain_adc(s, file->f_flags & O_NONBLOCK);
[PATCH] sem2mutex: sound/oss/ Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 11:00:39 +00:00
mutex_lock(&s->open_sem_adc);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
stop_adc(s);
dealloc_dmabuf(s, &s->dma_adc);
s->open_mode &= ~FMODE_READ;
[PATCH] sem2mutex: sound/oss/ Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 11:00:39 +00:00
mutex_unlock(&s->open_sem_adc);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
wake_up(&s->open_wait_adc);
}
return 0;
}
sound: push BKL into open functions This moves the lock_kernel() call from soundcore_open to the individual OSS device drivers, where we can deal with it one driver at a time if needed, or just kill off the drivers. All core components in ALSA already provide adequate locking in their open()-functions and do not require the big kernel lock, so there is no need to add the BKL there. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-11 10:16:36 +00:00
static int cs4297a_locked_open(struct inode *inode, struct file *file)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
int minor = iminor(inode);
struct cs4297a_state *s=NULL;
struct list_head *entry;
CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2, printk(KERN_INFO
"cs4297a: cs4297a_open(): inode=0x%.8x file=0x%.8x f_mode=0x%x\n",
(unsigned) inode, (unsigned) file, file->f_mode));
CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2, printk(KERN_INFO
"cs4297a: status = %08x\n", (int)__raw_readq(SS_CSR(R_SER_STATUS_DEBUG))));
list_for_each(entry, &cs4297a_devs)
{
s = list_entry(entry, struct cs4297a_state, list);
if (!((s->dev_audio ^ minor) & ~0xf))
break;
}
if (entry == &cs4297a_devs)
return -ENODEV;
if (!s) {
CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2, printk(KERN_INFO
"cs4297a: cs4297a_open(): Error - unable to find audio state struct\n"));
return -ENODEV;
}
VALIDATE_STATE(s);
file->private_data = s;
// wait for device to become free
if (!(file->f_mode & (FMODE_WRITE | FMODE_READ))) {
CS_DBGOUT(CS_FUNCTION | CS_OPEN | CS_ERROR, 2, printk(KERN_INFO
"cs4297a: cs4297a_open(): Error - must open READ and/or WRITE\n"));
return -ENODEV;
}
if (file->f_mode & FMODE_WRITE) {
if (__raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_TX)) != 0) {
printk(KERN_ERR "cs4297a: TX pipe needs to drain\n");
while (__raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_TX)))
;
}
[PATCH] sem2mutex: sound/oss/ Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 11:00:39 +00:00
mutex_lock(&s->open_sem_dac);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
while (s->open_mode & FMODE_WRITE) {
if (file->f_flags & O_NONBLOCK) {
[PATCH] sem2mutex: sound/oss/ Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 11:00:39 +00:00
mutex_unlock(&s->open_sem_dac);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -EBUSY;
}
[PATCH] sem2mutex: sound/oss/ Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 11:00:39 +00:00
mutex_unlock(&s->open_sem_dac);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
interruptible_sleep_on(&s->open_wait_dac);
if (signal_pending(current)) {
printk("open - sig pending\n");
return -ERESTARTSYS;
}
[PATCH] sem2mutex: sound/oss/ Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 11:00:39 +00:00
mutex_lock(&s->open_sem_dac);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
}
if (file->f_mode & FMODE_READ) {
[PATCH] sem2mutex: sound/oss/ Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 11:00:39 +00:00
mutex_lock(&s->open_sem_adc);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
while (s->open_mode & FMODE_READ) {
if (file->f_flags & O_NONBLOCK) {
[PATCH] sem2mutex: sound/oss/ Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 11:00:39 +00:00
mutex_unlock(&s->open_sem_adc);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -EBUSY;
}
[PATCH] sem2mutex: sound/oss/ Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 11:00:39 +00:00
mutex_unlock(&s->open_sem_adc);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
interruptible_sleep_on(&s->open_wait_adc);
if (signal_pending(current)) {
printk("open - sig pending\n");
return -ERESTARTSYS;
}
[PATCH] sem2mutex: sound/oss/ Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 11:00:39 +00:00
mutex_lock(&s->open_sem_adc);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
}
s->open_mode |= file->f_mode & (FMODE_READ | FMODE_WRITE);
if (file->f_mode & FMODE_READ) {
s->prop_adc.fmt = AFMT_S16_BE;
s->prop_adc.fmt_original = s->prop_adc.fmt;
s->prop_adc.channels = 2;
s->prop_adc.rate = 48000;
s->conversion = 0;
s->ena &= ~FMODE_READ;
s->dma_adc.ossfragshift = s->dma_adc.ossmaxfrags =
s->dma_adc.subdivision = 0;
[PATCH] sem2mutex: sound/oss/ Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 11:00:39 +00:00
mutex_unlock(&s->open_sem_adc);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (prog_dmabuf_adc(s)) {
CS_DBGOUT(CS_OPEN | CS_ERROR, 2, printk(KERN_ERR
"cs4297a: adc Program dmabufs failed.\n"));
cs4297a_release(inode, file);
return -ENOMEM;
}
}
if (file->f_mode & FMODE_WRITE) {
s->prop_dac.fmt = AFMT_S16_BE;
s->prop_dac.fmt_original = s->prop_dac.fmt;
s->prop_dac.channels = 2;
s->prop_dac.rate = 48000;
s->conversion = 0;
s->ena &= ~FMODE_WRITE;
s->dma_dac.ossfragshift = s->dma_dac.ossmaxfrags =
s->dma_dac.subdivision = 0;
[PATCH] sem2mutex: sound/oss/ Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 11:00:39 +00:00
mutex_unlock(&s->open_sem_dac);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (prog_dmabuf_dac(s)) {
CS_DBGOUT(CS_OPEN | CS_ERROR, 2, printk(KERN_ERR
"cs4297a: dac Program dmabufs failed.\n"));
cs4297a_release(inode, file);
return -ENOMEM;
}
}
CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2,
printk(KERN_INFO "cs4297a: cs4297a_open()- 0\n"));
return nonseekable_open(inode, file);
}
sound: push BKL into open functions This moves the lock_kernel() call from soundcore_open to the individual OSS device drivers, where we can deal with it one driver at a time if needed, or just kill off the drivers. All core components in ALSA already provide adequate locking in their open()-functions and do not require the big kernel lock, so there is no need to add the BKL there. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-11 10:16:36 +00:00
static int cs4297a_open(struct inode *inode, struct file *file)
{
int ret;
sound: autoconvert trivial BKL users to private mutex The usage of the BKL in the OSS sound drivers is trivial, and each of them only locks against itself, so it can be turned into per-driver mutexes. This is the script that was used for the conversion: file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-14 19:53:41 +00:00
mutex_lock(&swarm_cs4297a_mutex);
sound: push BKL into open functions This moves the lock_kernel() call from soundcore_open to the individual OSS device drivers, where we can deal with it one driver at a time if needed, or just kill off the drivers. All core components in ALSA already provide adequate locking in their open()-functions and do not require the big kernel lock, so there is no need to add the BKL there. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-11 10:16:36 +00:00
ret = cs4297a_open(inode, file);
sound: autoconvert trivial BKL users to private mutex The usage of the BKL in the OSS sound drivers is trivial, and each of them only locks against itself, so it can be turned into per-driver mutexes. This is the script that was used for the conversion: file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-14 19:53:41 +00:00
mutex_unlock(&swarm_cs4297a_mutex);
sound: push BKL into open functions This moves the lock_kernel() call from soundcore_open to the individual OSS device drivers, where we can deal with it one driver at a time if needed, or just kill off the drivers. All core components in ALSA already provide adequate locking in their open()-functions and do not require the big kernel lock, so there is no need to add the BKL there. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-11 10:16:36 +00:00
return ret;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
// ******************************************************************************************
// Wave (audio) file operations struct.
// ******************************************************************************************
OSS: constify function pointer tables Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:21:20 +00:00
static const struct file_operations cs4297a_audio_fops = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.owner = THIS_MODULE,
.llseek = no_llseek,
.read = cs4297a_read,
.write = cs4297a_write,
.poll = cs4297a_poll,
sound/oss: convert to unlocked_ioctl These are the final conversions for the ioctl file operation so we can remove it in the next merge window. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-12 17:53:18 +00:00
.unlocked_ioctl = cs4297a_unlocked_ioctl,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.mmap = cs4297a_mmap,
.open = cs4297a_open,
.release = cs4297a_release,
};
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
static void cs4297a_interrupt(int irq, void *dev_id)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct cs4297a_state *s = (struct cs4297a_state *) dev_id;
u32 status;
status = __raw_readq(SS_CSR(R_SER_STATUS_DEBUG));
CS_DBGOUT(CS_INTERRUPT, 6, printk(KERN_INFO
"cs4297a: cs4297a_interrupt() HISR=0x%.8x\n", status));
#if 0
/* XXXKW what check *should* be done here? */
if (!(status & (M_SYNCSER_RX_EOP_COUNT | M_SYNCSER_RX_OVERRUN | M_SYNCSER_RX_SYNC_ERR))) {
status = __raw_readq(SS_CSR(R_SER_STATUS));
printk(KERN_ERR "cs4297a: unexpected interrupt (status %08x)\n", status);
return;
}
#endif
if (status & M_SYNCSER_RX_SYNC_ERR) {
status = __raw_readq(SS_CSR(R_SER_STATUS));
printk(KERN_ERR "cs4297a: rx sync error (status %08x)\n", status);
return;
}
if (status & M_SYNCSER_RX_OVERRUN) {
int newptr, i;
s->stats.rx_ovrrn++;
printk(KERN_ERR "cs4297a: receive FIFO overrun\n");
/* Fix things up: get the receive descriptor pool
clean and give them back to the hardware */
while (__raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_RX)))
;
newptr = (unsigned) (((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_RX)) & M_DMA_CURDSCR_ADDR) -
s->dma_adc.descrtab_phys) / sizeof(serdma_descr_t));
for (i=0; i<DMA_DESCR; i++) {
s->dma_adc.descrtab[i].descr_a &= ~M_DMA_SERRX_SOP;
}
s->dma_adc.swptr = s->dma_adc.hwptr = newptr;
s->dma_adc.count = 0;
s->dma_adc.sb_swptr = s->dma_adc.sb_hwptr = s->dma_adc.sample_buf;
__raw_writeq(DMA_DESCR, SS_CSR(R_SER_DMA_DSCR_COUNT_RX));
}
spin_lock(&s->lock);
cs4297a_update_ptr(s,CS_TRUE);
spin_unlock(&s->lock);
CS_DBGOUT(CS_INTERRUPT, 6, printk(KERN_INFO
"cs4297a: cs4297a_interrupt()-\n"));
}
#if 0
static struct initvol {
int mixch;
int vol;
} initvol[] __initdata = {
{SOUND_MIXER_WRITE_VOLUME, 0x4040},
{SOUND_MIXER_WRITE_PCM, 0x4040},
{SOUND_MIXER_WRITE_SYNTH, 0x4040},
{SOUND_MIXER_WRITE_CD, 0x4040},
{SOUND_MIXER_WRITE_LINE, 0x4040},
{SOUND_MIXER_WRITE_LINE1, 0x4040},
{SOUND_MIXER_WRITE_RECLEV, 0x0000},
{SOUND_MIXER_WRITE_SPEAKER, 0x4040},
{SOUND_MIXER_WRITE_MIC, 0x0000}
};
#endif
static int __init cs4297a_init(void)
{
struct cs4297a_state *s;
u32 pwr, id;
mm_segment_t fs;
int rval;
#ifndef CONFIG_BCM_CS4297A_CSWARM
u64 cfg;
int mdio_val;
#endif
CS_DBGOUT(CS_INIT | CS_FUNCTION, 2, printk(KERN_INFO
"cs4297a: cs4297a_init_module()+ \n"));
#ifndef CONFIG_BCM_CS4297A_CSWARM
mdio_val = __raw_readq(KSEG1 + A_MAC_REGISTER(2, R_MAC_MDIO)) &
(M_MAC_MDIO_DIR|M_MAC_MDIO_OUT);
/* Check syscfg for synchronous serial on port 1 */
cfg = __raw_readq(KSEG1 + A_SCD_SYSTEM_CFG);
if (!(cfg & M_SYS_SER1_ENABLE)) {
__raw_writeq(cfg | M_SYS_SER1_ENABLE, KSEG1+A_SCD_SYSTEM_CFG);
cfg = __raw_readq(KSEG1 + A_SCD_SYSTEM_CFG);
if (!(cfg & M_SYS_SER1_ENABLE)) {
printk(KERN_INFO "cs4297a: serial port 1 not configured for synchronous operation\n");
return -1;
}
printk(KERN_INFO "cs4297a: serial port 1 switching to synchronous operation\n");
/* Force the codec (on SWARM) to reset by clearing
GENO, preserving MDIO (no effect on CSWARM) */
__raw_writeq(mdio_val, KSEG1+A_MAC_REGISTER(2, R_MAC_MDIO));
udelay(10);
}
/* Now set GENO */
__raw_writeq(mdio_val | M_MAC_GENC, KSEG1+A_MAC_REGISTER(2, R_MAC_MDIO));
/* Give the codec some time to finish resetting (start the bit clock) */
udelay(100);
#endif
[PATCH] OSS: replace kmalloc()+memset() combos with kzalloc() Replace kmalloc() + memset() pairs with the appropriate kzalloc() calls. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:33:16 +00:00
if (!(s = kzalloc(sizeof(struct cs4297a_state), GFP_KERNEL))) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CS_DBGOUT(CS_ERROR, 1, printk(KERN_ERR
"cs4297a: probe() no memory for state struct.\n"));
return -1;
}
s->magic = CS4297a_MAGIC;
init_waitqueue_head(&s->dma_adc.wait);
init_waitqueue_head(&s->dma_dac.wait);
init_waitqueue_head(&s->dma_adc.reg_wait);
init_waitqueue_head(&s->dma_dac.reg_wait);
init_waitqueue_head(&s->open_wait);
init_waitqueue_head(&s->open_wait_adc);
init_waitqueue_head(&s->open_wait_dac);
[PATCH] sem2mutex: sound/oss/ Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 11:00:39 +00:00
mutex_init(&s->open_sem_adc);
mutex_init(&s->open_sem_dac);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
spin_lock_init(&s->lock);
s->irq = K_INT_SER_1;
if (request_irq
(s->irq, cs4297a_interrupt, 0, "Crystal CS4297a", s)) {
CS_DBGOUT(CS_INIT | CS_ERROR, 1,
printk(KERN_ERR "cs4297a: irq %u in use\n", s->irq));
goto err_irq;
}
if ((s->dev_audio = register_sound_dsp(&cs4297a_audio_fops, -1)) <
0) {
CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_ERR
"cs4297a: probe() register_sound_dsp() failed.\n"));
goto err_dev1;
}
if ((s->dev_mixer = register_sound_mixer(&cs4297a_mixer_fops, -1)) <
0) {
CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_ERR
"cs4297a: probe() register_sound_mixer() failed.\n"));
goto err_dev2;
}
if (ser_init(s) || dma_init(s)) {
CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_ERR
"cs4297a: ser_init failed.\n"));
goto err_dev3;
}
do {
udelay(4000);
rval = cs4297a_read_ac97(s, AC97_POWER_CONTROL, &pwr);
} while (!rval && (pwr != 0xf));
if (!rval) {
char *sb1250_duart_present;
fs = get_fs();
set_fs(KERNEL_DS);
#if 0
val = SOUND_MASK_LINE;
mixer_ioctl(s, SOUND_MIXER_WRITE_RECSRC, (unsigned long) &val);
[PATCH] OSS: Use ARRAY_SIZE macro when appropriate (2) Use ARRAY_SIZE macro already defined in kernel.h Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 08:52:08 +00:00
for (i = 0; i < ARRAY_SIZE(initvol); i++) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
val = initvol[i].vol;
mixer_ioctl(s, initvol[i].mixch, (unsigned long) &val);
}
// cs4297a_write_ac97(s, 0x18, 0x0808);
#else
// cs4297a_write_ac97(s, 0x5e, 0x180);
cs4297a_write_ac97(s, 0x02, 0x0808);
cs4297a_write_ac97(s, 0x18, 0x0808);
#endif
set_fs(fs);
list_add(&s->list, &cs4297a_devs);
cs4297a_read_ac97(s, AC97_VENDOR_ID1, &id);
sb1250_duart_present = symbol_get(sb1250_duart_present);
if (sb1250_duart_present)
sb1250_duart_present[1] = 0;
printk(KERN_INFO "cs4297a: initialized (vendor id = %x)\n", id);
CS_DBGOUT(CS_INIT | CS_FUNCTION, 2,
printk(KERN_INFO "cs4297a: cs4297a_init_module()-\n"));
return 0;
}
err_dev3:
unregister_sound_mixer(s->dev_mixer);
err_dev2:
unregister_sound_dsp(s->dev_audio);
err_dev1:
free_irq(s->irq, s);
err_irq:
kfree(s);
printk(KERN_INFO "cs4297a: initialization failed\n");
return -1;
}
static void __exit cs4297a_cleanup(void)
{
/*
XXXKW
disable_irq, free_irq
drain DMA queue
disable DMA
disable TX/RX
free memory
*/
CS_DBGOUT(CS_INIT | CS_FUNCTION, 2,
printk(KERN_INFO "cs4297a: cleanup_cs4297a() finished\n"));
}
// ---------------------------------------------------------------------
MODULE_AUTHOR("Kip Walker, Broadcom Corp.");
MODULE_DESCRIPTION("Cirrus Logic CS4297a Driver for Broadcom SWARM board");
// ---------------------------------------------------------------------
module_init(cs4297a_init);
module_exit(cs4297a_cleanup);