dect
/
linux-2.6
Archived
13
0
Fork 0
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/drivers/net/meth.c

860 lines
23 KiB
C
Raw Normal View History

/*
* meth.c -- O2 Builtin 10/100 Ethernet driver
*
* Copyright (C) 2001-2003 Ilya Volynets
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/in.h>
#include <linux/in6.h>
#include <linux/device.h> /* struct device, et al */
#include <linux/netdevice.h> /* struct device, and other headers */
#include <linux/etherdevice.h> /* eth_type_trans */
#include <linux/ip.h> /* struct iphdr */
#include <linux/tcp.h> /* struct tcphdr */
#include <linux/skbuff.h>
#include <linux/mii.h> /* MII definitions */
#include <asm/ip32/mace.h>
#include <asm/ip32/ip32_ints.h>
#include <asm/io.h>
#include "meth.h"
#ifndef MFE_DEBUG
#define MFE_DEBUG 0
#endif
#if MFE_DEBUG>=1
#define DPRINTK(str,args...) printk(KERN_DEBUG "meth: %s: " str, __FUNCTION__ , ## args)
#define MFE_RX_DEBUG 2
#else
#define DPRINTK(str,args...)
#define MFE_RX_DEBUG 0
#endif
static const char *meth_str="SGI O2 Fast Ethernet";
#define HAVE_TX_TIMEOUT
/* The maximum time waited (in jiffies) before assuming a Tx failed. (400ms) */
#define TX_TIMEOUT (400*HZ/1000)
#ifdef HAVE_TX_TIMEOUT
static int timeout = TX_TIMEOUT;
module_param(timeout, int, 0);
#endif
/*
* This structure is private to each device. It is used to pass
* packets in and out, so there is place for a packet
*/
struct meth_private {
/* in-memory copy of MAC Control register */
unsigned long mac_ctrl;
/* in-memory copy of DMA Control register */
unsigned long dma_ctrl;
/* address of PHY, used by mdio_* functions, initialized in mdio_probe */
unsigned long phy_addr;
tx_packet *tx_ring;
dma_addr_t tx_ring_dma;
struct sk_buff *tx_skbs[TX_RING_ENTRIES];
dma_addr_t tx_skb_dmas[TX_RING_ENTRIES];
unsigned long tx_read, tx_write, tx_count;
rx_packet *rx_ring[RX_RING_ENTRIES];
dma_addr_t rx_ring_dmas[RX_RING_ENTRIES];
struct sk_buff *rx_skbs[RX_RING_ENTRIES];
unsigned long rx_write;
spinlock_t meth_lock;
};
static void meth_tx_timeout(struct net_device *dev);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
static irqreturn_t meth_interrupt(int irq, void *dev_id);
/* global, initialized in ip32-setup.c */
char o2meth_eaddr[8]={0,0,0,0,0,0,0,0};
static inline void load_eaddr(struct net_device *dev)
{
int i;
DECLARE_MAC_BUF(mac);
u64 macaddr;
DPRINTK("Loading MAC Address: %s\n", print_mac(mac, dev->dev_addr));
macaddr = 0;
for (i = 0; i < 6; i++)
macaddr |= dev->dev_addr[i] << ((5 - i) * 8);
mace->eth.mac_addr = macaddr;
}
/*
* Waits for BUSY status of mdio bus to clear
*/
#define WAIT_FOR_PHY(___rval) \
while ((___rval = mace->eth.phy_data) & MDIO_BUSY) { \
udelay(25); \
}
/*read phy register, return value read */
static unsigned long mdio_read(struct meth_private *priv, unsigned long phyreg)
{
unsigned long rval;
WAIT_FOR_PHY(rval);
mace->eth.phy_regs = (priv->phy_addr << 5) | (phyreg & 0x1f);
udelay(25);
mace->eth.phy_trans_go = 1;
udelay(25);
WAIT_FOR_PHY(rval);
return rval & MDIO_DATA_MASK;
}
static int mdio_probe(struct meth_private *priv)
{
int i;
unsigned long p2, p3;
/* check if phy is detected already */
if(priv->phy_addr>=0&&priv->phy_addr<32)
return 0;
spin_lock(&priv->meth_lock);
for (i=0;i<32;++i){
priv->phy_addr=i;
p2=mdio_read(priv,2);
p3=mdio_read(priv,3);
#if MFE_DEBUG>=2
switch ((p2<<12)|(p3>>4)){
case PHY_QS6612X:
DPRINTK("PHY is QS6612X\n");
break;
case PHY_ICS1889:
DPRINTK("PHY is ICS1889\n");
break;
case PHY_ICS1890:
DPRINTK("PHY is ICS1890\n");
break;
case PHY_DP83840:
DPRINTK("PHY is DP83840\n");
break;
}
#endif
if(p2!=0xffff&&p2!=0x0000){
DPRINTK("PHY code: %x\n",(p2<<12)|(p3>>4));
break;
}
}
spin_unlock(&priv->meth_lock);
if(priv->phy_addr<32) {
return 0;
}
DPRINTK("Oopsie! PHY is not known!\n");
priv->phy_addr=-1;
return -ENODEV;
}
static void meth_check_link(struct net_device *dev)
{
struct meth_private *priv = netdev_priv(dev);
unsigned long mii_advertising = mdio_read(priv, 4);
unsigned long mii_partner = mdio_read(priv, 5);
unsigned long negotiated = mii_advertising & mii_partner;
unsigned long duplex, speed;
if (mii_partner == 0xffff)
return;
speed = (negotiated & 0x0380) ? METH_100MBIT : 0;
duplex = ((negotiated & 0x0100) || (negotiated & 0x01C0) == 0x0040) ?
METH_PHY_FDX : 0;
if ((priv->mac_ctrl & METH_PHY_FDX) ^ duplex) {
DPRINTK("Setting %s-duplex\n", duplex ? "full" : "half");
if (duplex)
priv->mac_ctrl |= METH_PHY_FDX;
else
priv->mac_ctrl &= ~METH_PHY_FDX;
mace->eth.mac_ctrl = priv->mac_ctrl;
}
if ((priv->mac_ctrl & METH_100MBIT) ^ speed) {
DPRINTK("Setting %dMbs mode\n", speed ? 100 : 10);
if (duplex)
priv->mac_ctrl |= METH_100MBIT;
else
priv->mac_ctrl &= ~METH_100MBIT;
mace->eth.mac_ctrl = priv->mac_ctrl;
}
}
static int meth_init_tx_ring(struct meth_private *priv)
{
/* Init TX ring */
priv->tx_ring = dma_alloc_coherent(NULL, TX_RING_BUFFER_SIZE,
&priv->tx_ring_dma, GFP_ATOMIC);
if (!priv->tx_ring)
return -ENOMEM;
memset(priv->tx_ring, 0, TX_RING_BUFFER_SIZE);
priv->tx_count = priv->tx_read = priv->tx_write = 0;
mace->eth.tx_ring_base = priv->tx_ring_dma;
/* Now init skb save area */
memset(priv->tx_skbs, 0, sizeof(priv->tx_skbs));
memset(priv->tx_skb_dmas, 0, sizeof(priv->tx_skb_dmas));
return 0;
}
static int meth_init_rx_ring(struct meth_private *priv)
{
int i;
for (i = 0; i < RX_RING_ENTRIES; i++) {
priv->rx_skbs[i] = alloc_skb(METH_RX_BUFF_SIZE, 0);
/* 8byte status vector + 3quad padding + 2byte padding,
* to put data on 64bit aligned boundary */
skb_reserve(priv->rx_skbs[i],METH_RX_HEAD);
priv->rx_ring[i]=(rx_packet*)(priv->rx_skbs[i]->head);
/* I'll need to re-sync it after each RX */
priv->rx_ring_dmas[i] =
dma_map_single(NULL, priv->rx_ring[i],
METH_RX_BUFF_SIZE, DMA_FROM_DEVICE);
mace->eth.rx_fifo = priv->rx_ring_dmas[i];
}
priv->rx_write = 0;
return 0;
}
static void meth_free_tx_ring(struct meth_private *priv)
{
int i;
/* Remove any pending skb */
for (i = 0; i < TX_RING_ENTRIES; i++) {
if (priv->tx_skbs[i])
dev_kfree_skb(priv->tx_skbs[i]);
priv->tx_skbs[i] = NULL;
}
dma_free_coherent(NULL, TX_RING_BUFFER_SIZE, priv->tx_ring,
priv->tx_ring_dma);
}
/* Presumes RX DMA engine is stopped, and RX fifo ring is reset */
static void meth_free_rx_ring(struct meth_private *priv)
{
int i;
for (i = 0; i < RX_RING_ENTRIES; i++) {
dma_unmap_single(NULL, priv->rx_ring_dmas[i],
METH_RX_BUFF_SIZE, DMA_FROM_DEVICE);
priv->rx_ring[i] = 0;
priv->rx_ring_dmas[i] = 0;
kfree_skb(priv->rx_skbs[i]);
}
}
int meth_reset(struct net_device *dev)
{
struct meth_private *priv = netdev_priv(dev);
/* Reset card */
mace->eth.mac_ctrl = SGI_MAC_RESET;
udelay(1);
mace->eth.mac_ctrl = 0;
udelay(25);
/* Load ethernet address */
load_eaddr(dev);
/* Should load some "errata", but later */
/* Check for device */
if (mdio_probe(priv) < 0) {
DPRINTK("Unable to find PHY\n");
return -ENODEV;
}
/* Initial mode: 10 | Half-duplex | Accept normal packets */
priv->mac_ctrl = METH_ACCEPT_MCAST | METH_DEFAULT_IPG;
if (dev->flags & IFF_PROMISC)
priv->mac_ctrl |= METH_PROMISC;
mace->eth.mac_ctrl = priv->mac_ctrl;
/* Autonegotiate speed and duplex mode */
meth_check_link(dev);
/* Now set dma control, but don't enable DMA, yet */
priv->dma_ctrl = (4 << METH_RX_OFFSET_SHIFT) |
(RX_RING_ENTRIES << METH_RX_DEPTH_SHIFT);
mace->eth.dma_ctrl = priv->dma_ctrl;
return 0;
}
/*============End Helper Routines=====================*/
/*
* Open and close
*/
static int meth_open(struct net_device *dev)
{
struct meth_private *priv = netdev_priv(dev);
int ret;
priv->phy_addr = -1; /* No PHY is known yet... */
/* Initialize the hardware */
ret = meth_reset(dev);
if (ret < 0)
return ret;
/* Allocate the ring buffers */
ret = meth_init_tx_ring(priv);
if (ret < 0)
return ret;
ret = meth_init_rx_ring(priv);
if (ret < 0)
goto out_free_tx_ring;
ret = request_irq(dev->irq, meth_interrupt, 0, meth_str, dev);
if (ret) {
printk(KERN_ERR "%s: Can't get irq %d\n", dev->name, dev->irq);
goto out_free_rx_ring;
}
/* Start DMA */
priv->dma_ctrl |= METH_DMA_TX_EN | /*METH_DMA_TX_INT_EN |*/
METH_DMA_RX_EN | METH_DMA_RX_INT_EN;
mace->eth.dma_ctrl = priv->dma_ctrl;
DPRINTK("About to start queue\n");
netif_start_queue(dev);
return 0;
out_free_rx_ring:
meth_free_rx_ring(priv);
out_free_tx_ring:
meth_free_tx_ring(priv);
return ret;
}
static int meth_release(struct net_device *dev)
{
struct meth_private *priv = netdev_priv(dev);
DPRINTK("Stopping queue\n");
netif_stop_queue(dev); /* can't transmit any more */
/* shut down DMA */
priv->dma_ctrl &= ~(METH_DMA_TX_EN | METH_DMA_TX_INT_EN |
METH_DMA_RX_EN | METH_DMA_RX_INT_EN);
mace->eth.dma_ctrl = priv->dma_ctrl;
free_irq(dev->irq, dev);
meth_free_tx_ring(priv);
meth_free_rx_ring(priv);
return 0;
}
/*
* Receive a packet: retrieve, encapsulate and pass over to upper levels
*/
static void meth_rx(struct net_device* dev, unsigned long int_status)
{
struct sk_buff *skb;
unsigned long status;
struct meth_private *priv = netdev_priv(dev);
unsigned long fifo_rptr = (int_status & METH_INT_RX_RPTR_MASK) >> 8;
spin_lock(&priv->meth_lock);
priv->dma_ctrl &= ~METH_DMA_RX_INT_EN;
mace->eth.dma_ctrl = priv->dma_ctrl;
spin_unlock(&priv->meth_lock);
if (int_status & METH_INT_RX_UNDERFLOW) {
fifo_rptr = (fifo_rptr - 1) & 0x0f;
}
while (priv->rx_write != fifo_rptr) {
dma_unmap_single(NULL, priv->rx_ring_dmas[priv->rx_write],
METH_RX_BUFF_SIZE, DMA_FROM_DEVICE);
status = priv->rx_ring[priv->rx_write]->status.raw;
#if MFE_DEBUG
if (!(status & METH_RX_ST_VALID)) {
DPRINTK("Not received? status=%016lx\n",status);
}
#endif
if ((!(status & METH_RX_STATUS_ERRORS)) && (status & METH_RX_ST_VALID)) {
int len = (status & 0xffff) - 4; /* omit CRC */
/* length sanity check */
if (len < 60 || len > 1518) {
printk(KERN_DEBUG "%s: bogus packet size: %ld, status=%#2lx.\n",
dev->name, priv->rx_write,
priv->rx_ring[priv->rx_write]->status.raw);
dev->stats.rx_errors++;
dev->stats.rx_length_errors++;
skb = priv->rx_skbs[priv->rx_write];
} else {
skb = alloc_skb(METH_RX_BUFF_SIZE, GFP_ATOMIC);
if (!skb) {
/* Ouch! No memory! Drop packet on the floor */
DPRINTK("No mem: dropping packet\n");
dev->stats.rx_dropped++;
skb = priv->rx_skbs[priv->rx_write];
} else {
struct sk_buff *skb_c = priv->rx_skbs[priv->rx_write];
/* 8byte status vector + 3quad padding + 2byte padding,
* to put data on 64bit aligned boundary */
skb_reserve(skb, METH_RX_HEAD);
/* Write metadata, and then pass to the receive level */
skb_put(skb_c, len);
priv->rx_skbs[priv->rx_write] = skb;
skb_c->protocol = eth_type_trans(skb_c, dev);
dev->last_rx = jiffies;
dev->stats.rx_packets++;
dev->stats.rx_bytes += len;
netif_rx(skb_c);
}
}
} else {
dev->stats.rx_errors++;
skb=priv->rx_skbs[priv->rx_write];
#if MFE_DEBUG>0
printk(KERN_WARNING "meth: RX error: status=0x%016lx\n",status);
if(status&METH_RX_ST_RCV_CODE_VIOLATION)
printk(KERN_WARNING "Receive Code Violation\n");
if(status&METH_RX_ST_CRC_ERR)
printk(KERN_WARNING "CRC error\n");
if(status&METH_RX_ST_INV_PREAMBLE_CTX)
printk(KERN_WARNING "Invalid Preamble Context\n");
if(status&METH_RX_ST_LONG_EVT_SEEN)
printk(KERN_WARNING "Long Event Seen...\n");
if(status&METH_RX_ST_BAD_PACKET)
printk(KERN_WARNING "Bad Packet\n");
if(status&METH_RX_ST_CARRIER_EVT_SEEN)
printk(KERN_WARNING "Carrier Event Seen\n");
#endif
}
priv->rx_ring[priv->rx_write] = (rx_packet*)skb->head;
priv->rx_ring[priv->rx_write]->status.raw = 0;
priv->rx_ring_dmas[priv->rx_write] =
dma_map_single(NULL, priv->rx_ring[priv->rx_write],
METH_RX_BUFF_SIZE, DMA_FROM_DEVICE);
mace->eth.rx_fifo = priv->rx_ring_dmas[priv->rx_write];
ADVANCE_RX_PTR(priv->rx_write);
}
spin_lock(&priv->meth_lock);
/* In case there was underflow, and Rx DMA was disabled */
priv->dma_ctrl |= METH_DMA_RX_INT_EN | METH_DMA_RX_EN;
mace->eth.dma_ctrl = priv->dma_ctrl;
mace->eth.int_stat = METH_INT_RX_THRESHOLD;
spin_unlock(&priv->meth_lock);
}
static int meth_tx_full(struct net_device *dev)
{
struct meth_private *priv = netdev_priv(dev);
return (priv->tx_count >= TX_RING_ENTRIES - 1);
}
static void meth_tx_cleanup(struct net_device* dev, unsigned long int_status)
{
struct meth_private *priv = netdev_priv(dev);
unsigned long status;
struct sk_buff *skb;
unsigned long rptr = (int_status&TX_INFO_RPTR) >> 16;
spin_lock(&priv->meth_lock);
/* Stop DMA notification */
priv->dma_ctrl &= ~(METH_DMA_TX_INT_EN);
mace->eth.dma_ctrl = priv->dma_ctrl;
while (priv->tx_read != rptr) {
skb = priv->tx_skbs[priv->tx_read];
status = priv->tx_ring[priv->tx_read].header.raw;
#if MFE_DEBUG>=1
if (priv->tx_read == priv->tx_write)
DPRINTK("Auchi! tx_read=%d,tx_write=%d,rptr=%d?\n", priv->tx_read, priv->tx_write,rptr);
#endif
if (status & METH_TX_ST_DONE) {
if (status & METH_TX_ST_SUCCESS){
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
} else {
dev->stats.tx_errors++;
#if MFE_DEBUG>=1
DPRINTK("TX error: status=%016lx <",status);
if(status & METH_TX_ST_SUCCESS)
printk(" SUCCESS");
if(status & METH_TX_ST_TOOLONG)
printk(" TOOLONG");
if(status & METH_TX_ST_UNDERRUN)
printk(" UNDERRUN");
if(status & METH_TX_ST_EXCCOLL)
printk(" EXCCOLL");
if(status & METH_TX_ST_DEFER)
printk(" DEFER");
if(status & METH_TX_ST_LATECOLL)
printk(" LATECOLL");
printk(" >\n");
#endif
}
} else {
DPRINTK("RPTR points us here, but packet not done?\n");
break;
}
dev_kfree_skb_irq(skb);
priv->tx_skbs[priv->tx_read] = NULL;
priv->tx_ring[priv->tx_read].header.raw = 0;
priv->tx_read = (priv->tx_read+1)&(TX_RING_ENTRIES-1);
priv->tx_count--;
}
/* wake up queue if it was stopped */
if (netif_queue_stopped(dev) && !meth_tx_full(dev)) {
netif_wake_queue(dev);
}
mace->eth.int_stat = METH_INT_TX_EMPTY | METH_INT_TX_PKT;
spin_unlock(&priv->meth_lock);
}
static void meth_error(struct net_device* dev, unsigned status)
{
struct meth_private *priv = netdev_priv(dev);
printk(KERN_WARNING "meth: error status: 0x%08x\n",status);
/* check for errors too... */
if (status & (METH_INT_TX_LINK_FAIL))
printk(KERN_WARNING "meth: link failure\n");
/* Should I do full reset in this case? */
if (status & (METH_INT_MEM_ERROR))
printk(KERN_WARNING "meth: memory error\n");
if (status & (METH_INT_TX_ABORT))
printk(KERN_WARNING "meth: aborted\n");
if (status & (METH_INT_RX_OVERFLOW))
printk(KERN_WARNING "meth: Rx overflow\n");
if (status & (METH_INT_RX_UNDERFLOW)) {
printk(KERN_WARNING "meth: Rx underflow\n");
spin_lock(&priv->meth_lock);
mace->eth.int_stat = METH_INT_RX_UNDERFLOW;
/* more underflow interrupts will be delivered,
* effectively throwing us into an infinite loop.
* Thus I stop processing Rx in this case. */
priv->dma_ctrl &= ~METH_DMA_RX_EN;
mace->eth.dma_ctrl = priv->dma_ctrl;
DPRINTK("Disabled meth Rx DMA temporarily\n");
spin_unlock(&priv->meth_lock);
}
mace->eth.int_stat = METH_INT_ERROR;
}
/*
* The typical interrupt entry point
*/
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
static irqreturn_t meth_interrupt(int irq, void *dev_id)
{
struct net_device *dev = (struct net_device *)dev_id;
struct meth_private *priv = netdev_priv(dev);
unsigned long status;
status = mace->eth.int_stat;
while (status & 0xff) {
/* First handle errors - if we get Rx underflow,
* Rx DMA will be disabled, and Rx handler will reenable
* it. I don't think it's possible to get Rx underflow,
* without getting Rx interrupt */
if (status & METH_INT_ERROR) {
meth_error(dev, status);
}
if (status & (METH_INT_TX_EMPTY | METH_INT_TX_PKT)) {
/* a transmission is over: free the skb */
meth_tx_cleanup(dev, status);
}
if (status & METH_INT_RX_THRESHOLD) {
if (!(priv->dma_ctrl & METH_DMA_RX_INT_EN))
break;
/* send it to meth_rx for handling */
meth_rx(dev, status);
}
status = mace->eth.int_stat;
}
return IRQ_HANDLED;
}
/*
* Transmits packets that fit into TX descriptor (are <=120B)
*/
static void meth_tx_short_prepare(struct meth_private *priv,
struct sk_buff *skb)
{
tx_packet *desc = &priv->tx_ring[priv->tx_write];
int len = (skb->len < ETH_ZLEN) ? ETH_ZLEN : skb->len;
desc->header.raw = METH_TX_CMD_INT_EN | (len-1) | ((128-len) << 16);
/* maybe I should set whole thing to 0 first... */
skb_copy_from_linear_data(skb, desc->data.dt + (120 - len), skb->len);
if (skb->len < len)
memset(desc->data.dt + 120 - len + skb->len, 0, len-skb->len);
}
#define TX_CATBUF1 BIT(25)
static void meth_tx_1page_prepare(struct meth_private *priv,
struct sk_buff *skb)
{
tx_packet *desc = &priv->tx_ring[priv->tx_write];
void *buffer_data = (void *)(((unsigned long)skb->data + 7) & ~7);
int unaligned_len = (int)((unsigned long)buffer_data - (unsigned long)skb->data);
int buffer_len = skb->len - unaligned_len;
dma_addr_t catbuf;
desc->header.raw = METH_TX_CMD_INT_EN | TX_CATBUF1 | (skb->len - 1);
/* unaligned part */
if (unaligned_len) {
skb_copy_from_linear_data(skb, desc->data.dt + (120 - unaligned_len),
unaligned_len);
desc->header.raw |= (128 - unaligned_len) << 16;
}
/* first page */
catbuf = dma_map_single(NULL, buffer_data, buffer_len,
DMA_TO_DEVICE);
desc->data.cat_buf[0].form.start_addr = catbuf >> 3;
desc->data.cat_buf[0].form.len = buffer_len - 1;
}
#define TX_CATBUF2 BIT(26)
static void meth_tx_2page_prepare(struct meth_private *priv,
struct sk_buff *skb)
{
tx_packet *desc = &priv->tx_ring[priv->tx_write];
void *buffer1_data = (void *)(((unsigned long)skb->data + 7) & ~7);
void *buffer2_data = (void *)PAGE_ALIGN((unsigned long)skb->data);
int unaligned_len = (int)((unsigned long)buffer1_data - (unsigned long)skb->data);
int buffer1_len = (int)((unsigned long)buffer2_data - (unsigned long)buffer1_data);
int buffer2_len = skb->len - buffer1_len - unaligned_len;
dma_addr_t catbuf1, catbuf2;
desc->header.raw = METH_TX_CMD_INT_EN | TX_CATBUF1 | TX_CATBUF2| (skb->len - 1);
/* unaligned part */
if (unaligned_len){
skb_copy_from_linear_data(skb, desc->data.dt + (120 - unaligned_len),
unaligned_len);
desc->header.raw |= (128 - unaligned_len) << 16;
}
/* first page */
catbuf1 = dma_map_single(NULL, buffer1_data, buffer1_len,
DMA_TO_DEVICE);
desc->data.cat_buf[0].form.start_addr = catbuf1 >> 3;
desc->data.cat_buf[0].form.len = buffer1_len - 1;
/* second page */
catbuf2 = dma_map_single(NULL, buffer2_data, buffer2_len,
DMA_TO_DEVICE);
desc->data.cat_buf[1].form.start_addr = catbuf2 >> 3;
desc->data.cat_buf[1].form.len = buffer2_len - 1;
}
static void meth_add_to_tx_ring(struct meth_private *priv, struct sk_buff *skb)
{
/* Remember the skb, so we can free it at interrupt time */
priv->tx_skbs[priv->tx_write] = skb;
if (skb->len <= 120) {
/* Whole packet fits into descriptor */
meth_tx_short_prepare(priv, skb);
} else if (PAGE_ALIGN((unsigned long)skb->data) !=
PAGE_ALIGN((unsigned long)skb->data + skb->len - 1)) {
/* Packet crosses page boundary */
meth_tx_2page_prepare(priv, skb);
} else {
/* Packet is in one page */
meth_tx_1page_prepare(priv, skb);
}
priv->tx_write = (priv->tx_write + 1) & (TX_RING_ENTRIES - 1);
mace->eth.tx_info = priv->tx_write;
priv->tx_count++;
}
/*
* Transmit a packet (called by the kernel)
*/
static int meth_tx(struct sk_buff *skb, struct net_device *dev)
{
struct meth_private *priv = netdev_priv(dev);
unsigned long flags;
spin_lock_irqsave(&priv->meth_lock, flags);
/* Stop DMA notification */
priv->dma_ctrl &= ~(METH_DMA_TX_INT_EN);
mace->eth.dma_ctrl = priv->dma_ctrl;
meth_add_to_tx_ring(priv, skb);
dev->trans_start = jiffies; /* save the timestamp */
/* If TX ring is full, tell the upper layer to stop sending packets */
if (meth_tx_full(dev)) {
printk(KERN_DEBUG "TX full: stopping\n");
netif_stop_queue(dev);
}
/* Restart DMA notification */
priv->dma_ctrl |= METH_DMA_TX_INT_EN;
mace->eth.dma_ctrl = priv->dma_ctrl;
spin_unlock_irqrestore(&priv->meth_lock, flags);
return 0;
}
/*
* Deal with a transmit timeout.
*/
static void meth_tx_timeout(struct net_device *dev)
{
struct meth_private *priv = netdev_priv(dev);
unsigned long flags;
printk(KERN_WARNING "%s: transmit timed out\n", dev->name);
/* Protect against concurrent rx interrupts */
spin_lock_irqsave(&priv->meth_lock,flags);
/* Try to reset the interface. */
meth_reset(dev);
dev->stats.tx_errors++;
/* Clear all rings */
meth_free_tx_ring(priv);
meth_free_rx_ring(priv);
meth_init_tx_ring(priv);
meth_init_rx_ring(priv);
/* Restart dma */
priv->dma_ctrl |= METH_DMA_TX_EN | METH_DMA_RX_EN | METH_DMA_RX_INT_EN;
mace->eth.dma_ctrl = priv->dma_ctrl;
/* Enable interrupt */
spin_unlock_irqrestore(&priv->meth_lock, flags);
dev->trans_start = jiffies;
netif_wake_queue(dev);
return;
}
/*
* Ioctl commands
*/
static int meth_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
/* XXX Not yet implemented */
switch(cmd) {
case SIOCGMIIPHY:
case SIOCGMIIREG:
case SIOCSMIIREG:
default:
return -EOPNOTSUPP;
}
}
/*
* Return statistics to the caller
*/
/*
* The init function.
*/
static int __init meth_probe(struct platform_device *pdev)
{
struct net_device *dev;
struct meth_private *priv;
int err;
dev = alloc_etherdev(sizeof(struct meth_private));
if (!dev)
return -ENOMEM;
dev->open = meth_open;
dev->stop = meth_release;
dev->hard_start_xmit = meth_tx;
dev->do_ioctl = meth_ioctl;
#ifdef HAVE_TX_TIMEOUT
dev->tx_timeout = meth_tx_timeout;
dev->watchdog_timeo = timeout;
#endif
dev->irq = MACE_ETHERNET_IRQ;
dev->base_addr = (unsigned long)&mace->eth;
memcpy(dev->dev_addr, o2meth_eaddr, 6);
priv = netdev_priv(dev);
spin_lock_init(&priv->meth_lock);
SET_NETDEV_DEV(dev, &pdev->dev);
err = register_netdev(dev);
if (err) {
free_netdev(dev);
return err;
}
printk(KERN_INFO "%s: SGI MACE Ethernet rev. %d\n",
dev->name, (unsigned int)(mace->eth.mac_ctrl >> 29));
return 0;
}
static int __exit meth_remove(struct platform_device *pdev)
{
struct net_device *dev = platform_get_drvdata(pdev);
unregister_netdev(dev);
free_netdev(dev);
platform_set_drvdata(pdev, NULL);
return 0;
}
static struct platform_driver meth_driver = {
.probe = meth_probe,
.remove = __devexit_p(meth_remove),
.driver = {
.name = "meth",
.owner = THIS_MODULE,
}
};
static int __init meth_init_module(void)
{
int err;
err = platform_driver_register(&meth_driver);
if (err)
printk(KERN_ERR "Driver registration failed\n");
return err;
}
static void __exit meth_exit_module(void)
{
platform_driver_unregister(&meth_driver);
}
module_init(meth_init_module);
module_exit(meth_exit_module);
MODULE_AUTHOR("Ilya Volynets <ilya@theIlya.com>");
MODULE_DESCRIPTION("SGI O2 Builtin Fast Ethernet driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:meth");