dect
/
linux-2.6
Archived
13
0
Fork 0
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/drivers/net/wireless/ath/ath9k/debug.c

1798 lines
52 KiB
C
Raw Normal View History

/*
* Copyright (c) 2008-2011 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/export.h>
#include <asm/unaligned.h>
#include "ath9k.h"
#define REG_WRITE_D(_ah, _reg, _val) \
ath9k_hw_common(_ah)->ops->write((_ah), (_val), (_reg))
#define REG_READ_D(_ah, _reg) \
ath9k_hw_common(_ah)->ops->read((_ah), (_reg))
static ssize_t ath9k_debugfs_read_buf(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
u8 *buf = file->private_data;
return simple_read_from_buffer(user_buf, count, ppos, buf, strlen(buf));
}
static int ath9k_debugfs_release_buf(struct inode *inode, struct file *file)
{
vfree(file->private_data);
return 0;
}
#ifdef CONFIG_ATH_DEBUG
static ssize_t read_file_debug(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
char buf[32];
unsigned int len;
len = sprintf(buf, "0x%08x\n", common->debug_mask);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static ssize_t write_file_debug(struct file *file, const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
unsigned long mask;
char buf[32];
ssize_t len;
len = min(count, sizeof(buf) - 1);
if (copy_from_user(buf, user_buf, len))
return -EFAULT;
buf[len] = '\0';
if (strict_strtoul(buf, 0, &mask))
return -EINVAL;
common->debug_mask = mask;
return count;
}
static const struct file_operations fops_debug = {
.read = read_file_debug,
.write = write_file_debug,
.open = simple_open,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 16:52:59 +00:00
.owner = THIS_MODULE,
.llseek = default_llseek,
};
#endif
#define DMA_BUF_LEN 1024
static ssize_t read_file_tx_chainmask(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
struct ath_hw *ah = sc->sc_ah;
char buf[32];
unsigned int len;
len = sprintf(buf, "0x%08x\n", ah->txchainmask);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static ssize_t write_file_tx_chainmask(struct file *file, const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
struct ath_hw *ah = sc->sc_ah;
unsigned long mask;
char buf[32];
ssize_t len;
len = min(count, sizeof(buf) - 1);
if (copy_from_user(buf, user_buf, len))
return -EFAULT;
buf[len] = '\0';
if (strict_strtoul(buf, 0, &mask))
return -EINVAL;
ah->txchainmask = mask;
ah->caps.tx_chainmask = mask;
return count;
}
static const struct file_operations fops_tx_chainmask = {
.read = read_file_tx_chainmask,
.write = write_file_tx_chainmask,
.open = simple_open,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 16:52:59 +00:00
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static ssize_t read_file_rx_chainmask(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
struct ath_hw *ah = sc->sc_ah;
char buf[32];
unsigned int len;
len = sprintf(buf, "0x%08x\n", ah->rxchainmask);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static ssize_t write_file_rx_chainmask(struct file *file, const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
struct ath_hw *ah = sc->sc_ah;
unsigned long mask;
char buf[32];
ssize_t len;
len = min(count, sizeof(buf) - 1);
if (copy_from_user(buf, user_buf, len))
return -EFAULT;
buf[len] = '\0';
if (strict_strtoul(buf, 0, &mask))
return -EINVAL;
ah->rxchainmask = mask;
ah->caps.rx_chainmask = mask;
return count;
}
static const struct file_operations fops_rx_chainmask = {
.read = read_file_rx_chainmask,
.write = write_file_rx_chainmask,
.open = simple_open,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 16:52:59 +00:00
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static ssize_t read_file_disable_ani(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
char buf[32];
unsigned int len;
len = sprintf(buf, "%d\n", common->disable_ani);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static ssize_t write_file_disable_ani(struct file *file,
const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
unsigned long disable_ani;
char buf[32];
ssize_t len;
len = min(count, sizeof(buf) - 1);
if (copy_from_user(buf, user_buf, len))
return -EFAULT;
buf[len] = '\0';
if (strict_strtoul(buf, 0, &disable_ani))
return -EINVAL;
common->disable_ani = !!disable_ani;
if (disable_ani) {
clear_bit(SC_OP_ANI_RUN, &sc->sc_flags);
ath_stop_ani(sc);
} else {
ath_check_ani(sc);
}
return count;
}
static const struct file_operations fops_disable_ani = {
.read = read_file_disable_ani,
.write = write_file_disable_ani,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static ssize_t read_file_ant_diversity(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
char buf[32];
unsigned int len;
len = sprintf(buf, "%d\n", common->antenna_diversity);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static ssize_t write_file_ant_diversity(struct file *file,
const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
unsigned long antenna_diversity;
char buf[32];
ssize_t len;
len = min(count, sizeof(buf) - 1);
if (copy_from_user(buf, user_buf, len))
return -EFAULT;
if (!AR_SREV_9565(sc->sc_ah))
goto exit;
buf[len] = '\0';
if (strict_strtoul(buf, 0, &antenna_diversity))
return -EINVAL;
common->antenna_diversity = !!antenna_diversity;
ath9k_ps_wakeup(sc);
ath_ant_comb_update(sc);
ath_dbg(common, CONFIG, "Antenna diversity: %d\n",
common->antenna_diversity);
ath9k_ps_restore(sc);
exit:
return count;
}
static const struct file_operations fops_ant_diversity = {
.read = read_file_ant_diversity,
.write = write_file_ant_diversity,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static ssize_t read_file_dma(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
struct ath_hw *ah = sc->sc_ah;
char *buf;
int retval;
unsigned int len = 0;
u32 val[ATH9K_NUM_DMA_DEBUG_REGS];
int i, qcuOffset = 0, dcuOffset = 0;
u32 *qcuBase = &val[0], *dcuBase = &val[4];
buf = kmalloc(DMA_BUF_LEN, GFP_KERNEL);
if (!buf)
return -ENOMEM;
ath9k_ps_wakeup(sc);
REG_WRITE_D(ah, AR_MACMISC,
((AR_MACMISC_DMA_OBS_LINE_8 << AR_MACMISC_DMA_OBS_S) |
(AR_MACMISC_MISC_OBS_BUS_1 <<
AR_MACMISC_MISC_OBS_BUS_MSB_S)));
len += snprintf(buf + len, DMA_BUF_LEN - len,
"Raw DMA Debug values:\n");
for (i = 0; i < ATH9K_NUM_DMA_DEBUG_REGS; i++) {
if (i % 4 == 0)
len += snprintf(buf + len, DMA_BUF_LEN - len, "\n");
val[i] = REG_READ_D(ah, AR_DMADBG_0 + (i * sizeof(u32)));
len += snprintf(buf + len, DMA_BUF_LEN - len, "%d: %08x ",
i, val[i]);
}
len += snprintf(buf + len, DMA_BUF_LEN - len, "\n\n");
len += snprintf(buf + len, DMA_BUF_LEN - len,
"Num QCU: chain_st fsp_ok fsp_st DCU: chain_st\n");
for (i = 0; i < ATH9K_NUM_QUEUES; i++, qcuOffset += 4, dcuOffset += 5) {
if (i == 8) {
qcuOffset = 0;
qcuBase++;
}
if (i == 6) {
dcuOffset = 0;
dcuBase++;
}
len += snprintf(buf + len, DMA_BUF_LEN - len,
"%2d %2x %1x %2x %2x\n",
i, (*qcuBase & (0x7 << qcuOffset)) >> qcuOffset,
(*qcuBase & (0x8 << qcuOffset)) >> (qcuOffset + 3),
val[2] & (0x7 << (i * 3)) >> (i * 3),
(*dcuBase & (0x1f << dcuOffset)) >> dcuOffset);
}
len += snprintf(buf + len, DMA_BUF_LEN - len, "\n");
len += snprintf(buf + len, DMA_BUF_LEN - len,
"qcu_stitch state: %2x qcu_fetch state: %2x\n",
(val[3] & 0x003c0000) >> 18, (val[3] & 0x03c00000) >> 22);
len += snprintf(buf + len, DMA_BUF_LEN - len,
"qcu_complete state: %2x dcu_complete state: %2x\n",
(val[3] & 0x1c000000) >> 26, (val[6] & 0x3));
len += snprintf(buf + len, DMA_BUF_LEN - len,
"dcu_arb state: %2x dcu_fp state: %2x\n",
(val[5] & 0x06000000) >> 25, (val[5] & 0x38000000) >> 27);
len += snprintf(buf + len, DMA_BUF_LEN - len,
"chan_idle_dur: %3d chan_idle_dur_valid: %1d\n",
(val[6] & 0x000003fc) >> 2, (val[6] & 0x00000400) >> 10);
len += snprintf(buf + len, DMA_BUF_LEN - len,
"txfifo_valid_0: %1d txfifo_valid_1: %1d\n",
(val[6] & 0x00000800) >> 11, (val[6] & 0x00001000) >> 12);
len += snprintf(buf + len, DMA_BUF_LEN - len,
"txfifo_dcu_num_0: %2d txfifo_dcu_num_1: %2d\n",
(val[6] & 0x0001e000) >> 13, (val[6] & 0x001e0000) >> 17);
len += snprintf(buf + len, DMA_BUF_LEN - len, "pcu observe: 0x%x\n",
REG_READ_D(ah, AR_OBS_BUS_1));
len += snprintf(buf + len, DMA_BUF_LEN - len,
"AR_CR: 0x%x\n", REG_READ_D(ah, AR_CR));
ath9k_ps_restore(sc);
if (len > DMA_BUF_LEN)
len = DMA_BUF_LEN;
retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
kfree(buf);
return retval;
}
static const struct file_operations fops_dma = {
.read = read_file_dma,
.open = simple_open,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 16:52:59 +00:00
.owner = THIS_MODULE,
.llseek = default_llseek,
};
void ath_debug_stat_interrupt(struct ath_softc *sc, enum ath9k_int status)
{
if (status)
sc->debug.stats.istats.total++;
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
if (status & ATH9K_INT_RXLP)
sc->debug.stats.istats.rxlp++;
if (status & ATH9K_INT_RXHP)
sc->debug.stats.istats.rxhp++;
if (status & ATH9K_INT_BB_WATCHDOG)
sc->debug.stats.istats.bb_watchdog++;
} else {
if (status & ATH9K_INT_RX)
sc->debug.stats.istats.rxok++;
}
if (status & ATH9K_INT_RXEOL)
sc->debug.stats.istats.rxeol++;
if (status & ATH9K_INT_RXORN)
sc->debug.stats.istats.rxorn++;
if (status & ATH9K_INT_TX)
sc->debug.stats.istats.txok++;
if (status & ATH9K_INT_TXURN)
sc->debug.stats.istats.txurn++;
if (status & ATH9K_INT_RXPHY)
sc->debug.stats.istats.rxphyerr++;
if (status & ATH9K_INT_RXKCM)
sc->debug.stats.istats.rx_keycache_miss++;
if (status & ATH9K_INT_SWBA)
sc->debug.stats.istats.swba++;
if (status & ATH9K_INT_BMISS)
sc->debug.stats.istats.bmiss++;
if (status & ATH9K_INT_BNR)
sc->debug.stats.istats.bnr++;
if (status & ATH9K_INT_CST)
sc->debug.stats.istats.cst++;
if (status & ATH9K_INT_GTT)
sc->debug.stats.istats.gtt++;
if (status & ATH9K_INT_TIM)
sc->debug.stats.istats.tim++;
if (status & ATH9K_INT_CABEND)
sc->debug.stats.istats.cabend++;
if (status & ATH9K_INT_DTIMSYNC)
sc->debug.stats.istats.dtimsync++;
if (status & ATH9K_INT_DTIM)
sc->debug.stats.istats.dtim++;
if (status & ATH9K_INT_TSFOOR)
sc->debug.stats.istats.tsfoor++;
if (status & ATH9K_INT_MCI)
sc->debug.stats.istats.mci++;
if (status & ATH9K_INT_GENTIMER)
sc->debug.stats.istats.gen_timer++;
}
static ssize_t read_file_interrupt(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
unsigned int len = 0;
int rv;
int mxlen = 4000;
char *buf = kmalloc(mxlen, GFP_KERNEL);
if (!buf)
return -ENOMEM;
#define PR_IS(a, s) \
do { \
len += snprintf(buf + len, mxlen - len, \
"%21s: %10u\n", a, \
sc->debug.stats.istats.s); \
} while (0)
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
PR_IS("RXLP", rxlp);
PR_IS("RXHP", rxhp);
PR_IS("WATHDOG", bb_watchdog);
} else {
PR_IS("RX", rxok);
}
PR_IS("RXEOL", rxeol);
PR_IS("RXORN", rxorn);
PR_IS("TX", txok);
PR_IS("TXURN", txurn);
PR_IS("MIB", mib);
PR_IS("RXPHY", rxphyerr);
PR_IS("RXKCM", rx_keycache_miss);
PR_IS("SWBA", swba);
PR_IS("BMISS", bmiss);
PR_IS("BNR", bnr);
PR_IS("CST", cst);
PR_IS("GTT", gtt);
PR_IS("TIM", tim);
PR_IS("CABEND", cabend);
PR_IS("DTIMSYNC", dtimsync);
PR_IS("DTIM", dtim);
PR_IS("TSFOOR", tsfoor);
PR_IS("MCI", mci);
PR_IS("GENTIMER", gen_timer);
PR_IS("TOTAL", total);
len += snprintf(buf + len, mxlen - len,
"SYNC_CAUSE stats:\n");
PR_IS("Sync-All", sync_cause_all);
PR_IS("RTC-IRQ", sync_rtc_irq);
PR_IS("MAC-IRQ", sync_mac_irq);
PR_IS("EEPROM-Illegal-Access", eeprom_illegal_access);
PR_IS("APB-Timeout", apb_timeout);
PR_IS("PCI-Mode-Conflict", pci_mode_conflict);
PR_IS("HOST1-Fatal", host1_fatal);
PR_IS("HOST1-Perr", host1_perr);
PR_IS("TRCV-FIFO-Perr", trcv_fifo_perr);
PR_IS("RADM-CPL-EP", radm_cpl_ep);
PR_IS("RADM-CPL-DLLP-Abort", radm_cpl_dllp_abort);
PR_IS("RADM-CPL-TLP-Abort", radm_cpl_tlp_abort);
PR_IS("RADM-CPL-ECRC-Err", radm_cpl_ecrc_err);
PR_IS("RADM-CPL-Timeout", radm_cpl_timeout);
PR_IS("Local-Bus-Timeout", local_timeout);
PR_IS("PM-Access", pm_access);
PR_IS("MAC-Awake", mac_awake);
PR_IS("MAC-Asleep", mac_asleep);
PR_IS("MAC-Sleep-Access", mac_sleep_access);
if (len > mxlen)
len = mxlen;
rv = simple_read_from_buffer(user_buf, count, ppos, buf, len);
kfree(buf);
return rv;
}
static const struct file_operations fops_interrupt = {
.read = read_file_interrupt,
.open = simple_open,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 16:52:59 +00:00
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static ssize_t read_file_xmit(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
char *buf;
unsigned int len = 0, size = 2048;
ssize_t retval = 0;
buf = kzalloc(size, GFP_KERNEL);
if (buf == NULL)
return -ENOMEM;
len += sprintf(buf, "%30s %10s%10s%10s\n\n",
"BE", "BK", "VI", "VO");
PR("MPDUs Queued: ", queued);
PR("MPDUs Completed: ", completed);
PR("MPDUs XRetried: ", xretries);
PR("Aggregates: ", a_aggr);
PR("AMPDUs Queued HW:", a_queued_hw);
PR("AMPDUs Queued SW:", a_queued_sw);
PR("AMPDUs Completed:", a_completed);
PR("AMPDUs Retried: ", a_retries);
PR("AMPDUs XRetried: ", a_xretries);
PR("FIFO Underrun: ", fifo_underrun);
PR("TXOP Exceeded: ", xtxop);
PR("TXTIMER Expiry: ", timer_exp);
PR("DESC CFG Error: ", desc_cfg_err);
PR("DATA Underrun: ", data_underrun);
PR("DELIM Underrun: ", delim_underrun);
PR("TX-Pkts-All: ", tx_pkts_all);
PR("TX-Bytes-All: ", tx_bytes_all);
PR("HW-put-tx-buf: ", puttxbuf);
PR("HW-tx-start: ", txstart);
PR("HW-tx-proc-desc: ", txprocdesc);
PR("TX-Failed: ", txfailed);
if (len > size)
len = size;
retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
kfree(buf);
return retval;
}
static ssize_t read_file_queues(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
struct ath_txq *txq;
char *buf;
unsigned int len = 0, size = 1024;
ssize_t retval = 0;
int i;
char *qname[4] = {"VO", "VI", "BE", "BK"};
buf = kzalloc(size, GFP_KERNEL);
if (buf == NULL)
return -ENOMEM;
for (i = 0; i < IEEE80211_NUM_ACS; i++) {
txq = sc->tx.txq_map[i];
len += snprintf(buf + len, size - len, "(%s): ", qname[i]);
ath_txq_lock(sc, txq);
len += snprintf(buf + len, size - len, "%s: %d ",
"qnum", txq->axq_qnum);
len += snprintf(buf + len, size - len, "%s: %2d ",
"qdepth", txq->axq_depth);
len += snprintf(buf + len, size - len, "%s: %2d ",
"ampdu-depth", txq->axq_ampdu_depth);
len += snprintf(buf + len, size - len, "%s: %3d ",
"pending", txq->pending_frames);
len += snprintf(buf + len, size - len, "%s: %d\n",
"stopped", txq->stopped);
ath_txq_unlock(sc, txq);
}
if (len > size)
len = size;
retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
kfree(buf);
return retval;
}
static ssize_t read_file_misc(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ieee80211_hw *hw = sc->hw;
struct ath9k_vif_iter_data iter_data;
char buf[512];
unsigned int len = 0;
ssize_t retval = 0;
unsigned int reg;
u32 rxfilter;
len += snprintf(buf + len, sizeof(buf) - len,
"BSSID: %pM\n", common->curbssid);
len += snprintf(buf + len, sizeof(buf) - len,
"BSSID-MASK: %pM\n", common->bssidmask);
len += snprintf(buf + len, sizeof(buf) - len,
"OPMODE: %s\n", ath_opmode_to_string(sc->sc_ah->opmode));
ath9k_ps_wakeup(sc);
rxfilter = ath9k_hw_getrxfilter(sc->sc_ah);
ath9k_ps_restore(sc);
len += snprintf(buf + len, sizeof(buf) - len,
"RXFILTER: 0x%x", rxfilter);
if (rxfilter & ATH9K_RX_FILTER_UCAST)
len += snprintf(buf + len, sizeof(buf) - len, " UCAST");
if (rxfilter & ATH9K_RX_FILTER_MCAST)
len += snprintf(buf + len, sizeof(buf) - len, " MCAST");
if (rxfilter & ATH9K_RX_FILTER_BCAST)
len += snprintf(buf + len, sizeof(buf) - len, " BCAST");
if (rxfilter & ATH9K_RX_FILTER_CONTROL)
len += snprintf(buf + len, sizeof(buf) - len, " CONTROL");
if (rxfilter & ATH9K_RX_FILTER_BEACON)
len += snprintf(buf + len, sizeof(buf) - len, " BEACON");
if (rxfilter & ATH9K_RX_FILTER_PROM)
len += snprintf(buf + len, sizeof(buf) - len, " PROM");
if (rxfilter & ATH9K_RX_FILTER_PROBEREQ)
len += snprintf(buf + len, sizeof(buf) - len, " PROBEREQ");
if (rxfilter & ATH9K_RX_FILTER_PHYERR)
len += snprintf(buf + len, sizeof(buf) - len, " PHYERR");
if (rxfilter & ATH9K_RX_FILTER_MYBEACON)
len += snprintf(buf + len, sizeof(buf) - len, " MYBEACON");
if (rxfilter & ATH9K_RX_FILTER_COMP_BAR)
len += snprintf(buf + len, sizeof(buf) - len, " COMP_BAR");
if (rxfilter & ATH9K_RX_FILTER_PSPOLL)
len += snprintf(buf + len, sizeof(buf) - len, " PSPOLL");
if (rxfilter & ATH9K_RX_FILTER_PHYRADAR)
len += snprintf(buf + len, sizeof(buf) - len, " PHYRADAR");
if (rxfilter & ATH9K_RX_FILTER_MCAST_BCAST_ALL)
len += snprintf(buf + len, sizeof(buf) - len, " MCAST_BCAST_ALL");
if (rxfilter & ATH9K_RX_FILTER_CONTROL_WRAPPER)
len += snprintf(buf + len, sizeof(buf) - len, " CONTROL_WRAPPER");
len += snprintf(buf + len, sizeof(buf) - len, "\n");
reg = sc->sc_ah->imask;
len += snprintf(buf + len, sizeof(buf) - len, "INTERRUPT-MASK: 0x%x", reg);
if (reg & ATH9K_INT_SWBA)
len += snprintf(buf + len, sizeof(buf) - len, " SWBA");
if (reg & ATH9K_INT_BMISS)
len += snprintf(buf + len, sizeof(buf) - len, " BMISS");
if (reg & ATH9K_INT_CST)
len += snprintf(buf + len, sizeof(buf) - len, " CST");
if (reg & ATH9K_INT_RX)
len += snprintf(buf + len, sizeof(buf) - len, " RX");
if (reg & ATH9K_INT_RXHP)
len += snprintf(buf + len, sizeof(buf) - len, " RXHP");
if (reg & ATH9K_INT_RXLP)
len += snprintf(buf + len, sizeof(buf) - len, " RXLP");
if (reg & ATH9K_INT_BB_WATCHDOG)
len += snprintf(buf + len, sizeof(buf) - len, " BB_WATCHDOG");
len += snprintf(buf + len, sizeof(buf) - len, "\n");
ath9k_calculate_iter_data(hw, NULL, &iter_data);
len += snprintf(buf + len, sizeof(buf) - len,
"VIF-COUNTS: AP: %i STA: %i MESH: %i WDS: %i"
" ADHOC: %i TOTAL: %hi BEACON-VIF: %hi\n",
iter_data.naps, iter_data.nstations, iter_data.nmeshes,
iter_data.nwds, iter_data.nadhocs,
sc->nvifs, sc->nbcnvifs);
if (len > sizeof(buf))
len = sizeof(buf);
retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
return retval;
}
static ssize_t read_file_reset(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
char buf[512];
unsigned int len = 0;
len += snprintf(buf + len, sizeof(buf) - len,
"%17s: %2d\n", "Baseband Hang",
sc->debug.stats.reset[RESET_TYPE_BB_HANG]);
len += snprintf(buf + len, sizeof(buf) - len,
"%17s: %2d\n", "Baseband Watchdog",
sc->debug.stats.reset[RESET_TYPE_BB_WATCHDOG]);
len += snprintf(buf + len, sizeof(buf) - len,
"%17s: %2d\n", "Fatal HW Error",
sc->debug.stats.reset[RESET_TYPE_FATAL_INT]);
len += snprintf(buf + len, sizeof(buf) - len,
"%17s: %2d\n", "TX HW error",
sc->debug.stats.reset[RESET_TYPE_TX_ERROR]);
len += snprintf(buf + len, sizeof(buf) - len,
"%17s: %2d\n", "TX Path Hang",
sc->debug.stats.reset[RESET_TYPE_TX_HANG]);
len += snprintf(buf + len, sizeof(buf) - len,
"%17s: %2d\n", "PLL RX Hang",
sc->debug.stats.reset[RESET_TYPE_PLL_HANG]);
len += snprintf(buf + len, sizeof(buf) - len,
"%17s: %2d\n", "MCI Reset",
sc->debug.stats.reset[RESET_TYPE_MCI]);
if (len > sizeof(buf))
len = sizeof(buf);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 13:59:39 +00:00
void ath_debug_stat_tx(struct ath_softc *sc, struct ath_buf *bf,
struct ath_tx_status *ts, struct ath_txq *txq,
unsigned int flags)
{
#define TX_SAMP_DBG(c) (sc->debug.bb_mac_samp[sc->debug.sampidx].ts\
[sc->debug.tsidx].c)
int qnum = txq->axq_qnum;
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 13:59:39 +00:00
TX_STAT_INC(qnum, tx_pkts_all);
sc->debug.stats.txstats[qnum].tx_bytes_all += bf->bf_mpdu->len;
if (bf_isampdu(bf)) {
if (flags & ATH_TX_ERROR)
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 13:59:39 +00:00
TX_STAT_INC(qnum, a_xretries);
else
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 13:59:39 +00:00
TX_STAT_INC(qnum, a_completed);
} else {
if (ts->ts_status & ATH9K_TXERR_XRETRY)
TX_STAT_INC(qnum, xretries);
else
TX_STAT_INC(qnum, completed);
}
if (ts->ts_status & ATH9K_TXERR_FIFO)
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 13:59:39 +00:00
TX_STAT_INC(qnum, fifo_underrun);
if (ts->ts_status & ATH9K_TXERR_XTXOP)
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 13:59:39 +00:00
TX_STAT_INC(qnum, xtxop);
if (ts->ts_status & ATH9K_TXERR_TIMER_EXPIRED)
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 13:59:39 +00:00
TX_STAT_INC(qnum, timer_exp);
if (ts->ts_flags & ATH9K_TX_DESC_CFG_ERR)
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 13:59:39 +00:00
TX_STAT_INC(qnum, desc_cfg_err);
if (ts->ts_flags & ATH9K_TX_DATA_UNDERRUN)
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 13:59:39 +00:00
TX_STAT_INC(qnum, data_underrun);
if (ts->ts_flags & ATH9K_TX_DELIM_UNDERRUN)
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 13:59:39 +00:00
TX_STAT_INC(qnum, delim_underrun);
#ifdef CONFIG_ATH9K_MAC_DEBUG
spin_lock(&sc->debug.samp_lock);
TX_SAMP_DBG(jiffies) = jiffies;
TX_SAMP_DBG(rssi_ctl0) = ts->ts_rssi_ctl0;
TX_SAMP_DBG(rssi_ctl1) = ts->ts_rssi_ctl1;
TX_SAMP_DBG(rssi_ctl2) = ts->ts_rssi_ctl2;
TX_SAMP_DBG(rssi_ext0) = ts->ts_rssi_ext0;
TX_SAMP_DBG(rssi_ext1) = ts->ts_rssi_ext1;
TX_SAMP_DBG(rssi_ext2) = ts->ts_rssi_ext2;
TX_SAMP_DBG(rateindex) = ts->ts_rateindex;
TX_SAMP_DBG(isok) = !!(ts->ts_status & ATH9K_TXERR_MASK);
TX_SAMP_DBG(rts_fail_cnt) = ts->ts_shortretry;
TX_SAMP_DBG(data_fail_cnt) = ts->ts_longretry;
TX_SAMP_DBG(rssi) = ts->ts_rssi;
TX_SAMP_DBG(tid) = ts->tid;
TX_SAMP_DBG(qid) = ts->qid;
if (ts->ts_flags & ATH9K_TX_BA) {
TX_SAMP_DBG(ba_low) = ts->ba_low;
TX_SAMP_DBG(ba_high) = ts->ba_high;
} else {
TX_SAMP_DBG(ba_low) = 0;
TX_SAMP_DBG(ba_high) = 0;
}
sc->debug.tsidx = (sc->debug.tsidx + 1) % ATH_DBG_MAX_SAMPLES;
spin_unlock(&sc->debug.samp_lock);
#endif
#undef TX_SAMP_DBG
}
static const struct file_operations fops_xmit = {
.read = read_file_xmit,
.open = simple_open,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 16:52:59 +00:00
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static const struct file_operations fops_queues = {
.read = read_file_queues,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static const struct file_operations fops_misc = {
.read = read_file_misc,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static const struct file_operations fops_reset = {
.read = read_file_reset,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static ssize_t read_file_recv(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
#define PHY_ERR(s, p) \
len += snprintf(buf + len, size - len, "%22s : %10u\n", s, \
sc->debug.stats.rxstats.phy_err_stats[p]);
#define RXS_ERR(s, e) \
do { \
len += snprintf(buf + len, size - len, \
"%22s : %10u\n", s, \
sc->debug.stats.rxstats.e); \
} while (0)
struct ath_softc *sc = file->private_data;
char *buf;
unsigned int len = 0, size = 1600;
ssize_t retval = 0;
buf = kzalloc(size, GFP_KERNEL);
if (buf == NULL)
return -ENOMEM;
RXS_ERR("CRC ERR", crc_err);
RXS_ERR("DECRYPT CRC ERR", decrypt_crc_err);
RXS_ERR("PHY ERR", phy_err);
RXS_ERR("MIC ERR", mic_err);
RXS_ERR("PRE-DELIM CRC ERR", pre_delim_crc_err);
RXS_ERR("POST-DELIM CRC ERR", post_delim_crc_err);
RXS_ERR("DECRYPT BUSY ERR", decrypt_busy_err);
RXS_ERR("RX-LENGTH-ERR", rx_len_err);
RXS_ERR("RX-OOM-ERR", rx_oom_err);
RXS_ERR("RX-RATE-ERR", rx_rate_err);
RXS_ERR("RX-TOO-MANY-FRAGS", rx_too_many_frags_err);
PHY_ERR("UNDERRUN ERR", ATH9K_PHYERR_UNDERRUN);
PHY_ERR("TIMING ERR", ATH9K_PHYERR_TIMING);
PHY_ERR("PARITY ERR", ATH9K_PHYERR_PARITY);
PHY_ERR("RATE ERR", ATH9K_PHYERR_RATE);
PHY_ERR("LENGTH ERR", ATH9K_PHYERR_LENGTH);
PHY_ERR("RADAR ERR", ATH9K_PHYERR_RADAR);
PHY_ERR("SERVICE ERR", ATH9K_PHYERR_SERVICE);
PHY_ERR("TOR ERR", ATH9K_PHYERR_TOR);
PHY_ERR("OFDM-TIMING ERR", ATH9K_PHYERR_OFDM_TIMING);
PHY_ERR("OFDM-SIGNAL-PARITY ERR", ATH9K_PHYERR_OFDM_SIGNAL_PARITY);
PHY_ERR("OFDM-RATE ERR", ATH9K_PHYERR_OFDM_RATE_ILLEGAL);
PHY_ERR("OFDM-LENGTH ERR", ATH9K_PHYERR_OFDM_LENGTH_ILLEGAL);
PHY_ERR("OFDM-POWER-DROP ERR", ATH9K_PHYERR_OFDM_POWER_DROP);
PHY_ERR("OFDM-SERVICE ERR", ATH9K_PHYERR_OFDM_SERVICE);
PHY_ERR("OFDM-RESTART ERR", ATH9K_PHYERR_OFDM_RESTART);
PHY_ERR("FALSE-RADAR-EXT ERR", ATH9K_PHYERR_FALSE_RADAR_EXT);
PHY_ERR("CCK-TIMING ERR", ATH9K_PHYERR_CCK_TIMING);
PHY_ERR("CCK-HEADER-CRC ERR", ATH9K_PHYERR_CCK_HEADER_CRC);
PHY_ERR("CCK-RATE ERR", ATH9K_PHYERR_CCK_RATE_ILLEGAL);
PHY_ERR("CCK-SERVICE ERR", ATH9K_PHYERR_CCK_SERVICE);
PHY_ERR("CCK-RESTART ERR", ATH9K_PHYERR_CCK_RESTART);
PHY_ERR("CCK-LENGTH ERR", ATH9K_PHYERR_CCK_LENGTH_ILLEGAL);
PHY_ERR("CCK-POWER-DROP ERR", ATH9K_PHYERR_CCK_POWER_DROP);
PHY_ERR("HT-CRC ERR", ATH9K_PHYERR_HT_CRC_ERROR);
PHY_ERR("HT-LENGTH ERR", ATH9K_PHYERR_HT_LENGTH_ILLEGAL);
PHY_ERR("HT-RATE ERR", ATH9K_PHYERR_HT_RATE_ILLEGAL);
RXS_ERR("RX-Pkts-All", rx_pkts_all);
RXS_ERR("RX-Bytes-All", rx_bytes_all);
RXS_ERR("RX-Beacons", rx_beacons);
RXS_ERR("RX-Frags", rx_frags);
if (len > size)
len = size;
retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
kfree(buf);
return retval;
#undef RXS_ERR
#undef PHY_ERR
}
void ath_debug_stat_rx(struct ath_softc *sc, struct ath_rx_status *rs)
{
#define RX_PHY_ERR_INC(c) sc->debug.stats.rxstats.phy_err_stats[c]++
#define RX_SAMP_DBG(c) (sc->debug.bb_mac_samp[sc->debug.sampidx].rs\
[sc->debug.rsidx].c)
RX_STAT_INC(rx_pkts_all);
sc->debug.stats.rxstats.rx_bytes_all += rs->rs_datalen;
if (rs->rs_status & ATH9K_RXERR_CRC)
RX_STAT_INC(crc_err);
if (rs->rs_status & ATH9K_RXERR_DECRYPT)
RX_STAT_INC(decrypt_crc_err);
if (rs->rs_status & ATH9K_RXERR_MIC)
RX_STAT_INC(mic_err);
if (rs->rs_status & ATH9K_RX_DELIM_CRC_PRE)
RX_STAT_INC(pre_delim_crc_err);
if (rs->rs_status & ATH9K_RX_DELIM_CRC_POST)
RX_STAT_INC(post_delim_crc_err);
if (rs->rs_status & ATH9K_RX_DECRYPT_BUSY)
RX_STAT_INC(decrypt_busy_err);
if (rs->rs_status & ATH9K_RXERR_PHY) {
RX_STAT_INC(phy_err);
if (rs->rs_phyerr < ATH9K_PHYERR_MAX)
RX_PHY_ERR_INC(rs->rs_phyerr);
}
#ifdef CONFIG_ATH9K_MAC_DEBUG
spin_lock(&sc->debug.samp_lock);
RX_SAMP_DBG(jiffies) = jiffies;
RX_SAMP_DBG(rssi_ctl0) = rs->rs_rssi_ctl0;
RX_SAMP_DBG(rssi_ctl1) = rs->rs_rssi_ctl1;
RX_SAMP_DBG(rssi_ctl2) = rs->rs_rssi_ctl2;
RX_SAMP_DBG(rssi_ext0) = rs->rs_rssi_ext0;
RX_SAMP_DBG(rssi_ext1) = rs->rs_rssi_ext1;
RX_SAMP_DBG(rssi_ext2) = rs->rs_rssi_ext2;
RX_SAMP_DBG(antenna) = rs->rs_antenna;
RX_SAMP_DBG(rssi) = rs->rs_rssi;
RX_SAMP_DBG(rate) = rs->rs_rate;
RX_SAMP_DBG(is_mybeacon) = rs->is_mybeacon;
sc->debug.rsidx = (sc->debug.rsidx + 1) % ATH_DBG_MAX_SAMPLES;
spin_unlock(&sc->debug.samp_lock);
#endif
#undef RX_PHY_ERR_INC
#undef RX_SAMP_DBG
}
static const struct file_operations fops_recv = {
.read = read_file_recv,
.open = simple_open,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 16:52:59 +00:00
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static ssize_t read_file_regidx(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
char buf[32];
unsigned int len;
len = sprintf(buf, "0x%08x\n", sc->debug.regidx);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static ssize_t write_file_regidx(struct file *file, const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
unsigned long regidx;
char buf[32];
ssize_t len;
len = min(count, sizeof(buf) - 1);
if (copy_from_user(buf, user_buf, len))
return -EFAULT;
buf[len] = '\0';
if (strict_strtoul(buf, 0, &regidx))
return -EINVAL;
sc->debug.regidx = regidx;
return count;
}
static const struct file_operations fops_regidx = {
.read = read_file_regidx,
.write = write_file_regidx,
.open = simple_open,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 16:52:59 +00:00
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static ssize_t read_file_regval(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
struct ath_hw *ah = sc->sc_ah;
char buf[32];
unsigned int len;
u32 regval;
ath9k_ps_wakeup(sc);
regval = REG_READ_D(ah, sc->debug.regidx);
ath9k_ps_restore(sc);
len = sprintf(buf, "0x%08x\n", regval);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static ssize_t write_file_regval(struct file *file, const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
struct ath_hw *ah = sc->sc_ah;
unsigned long regval;
char buf[32];
ssize_t len;
len = min(count, sizeof(buf) - 1);
if (copy_from_user(buf, user_buf, len))
return -EFAULT;
buf[len] = '\0';
if (strict_strtoul(buf, 0, &regval))
return -EINVAL;
ath9k_ps_wakeup(sc);
REG_WRITE_D(ah, sc->debug.regidx, regval);
ath9k_ps_restore(sc);
return count;
}
static const struct file_operations fops_regval = {
.read = read_file_regval,
.write = write_file_regval,
.open = simple_open,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 16:52:59 +00:00
.owner = THIS_MODULE,
.llseek = default_llseek,
};
#define REGDUMP_LINE_SIZE 20
static int open_file_regdump(struct inode *inode, struct file *file)
{
struct ath_softc *sc = inode->i_private;
unsigned int len = 0;
u8 *buf;
int i;
unsigned long num_regs, regdump_len, max_reg_offset;
max_reg_offset = AR_SREV_9300_20_OR_LATER(sc->sc_ah) ? 0x16bd4 : 0xb500;
num_regs = max_reg_offset / 4 + 1;
regdump_len = num_regs * REGDUMP_LINE_SIZE + 1;
buf = vmalloc(regdump_len);
if (!buf)
return -ENOMEM;
ath9k_ps_wakeup(sc);
for (i = 0; i < num_regs; i++)
len += scnprintf(buf + len, regdump_len - len,
"0x%06x 0x%08x\n", i << 2, REG_READ(sc->sc_ah, i << 2));
ath9k_ps_restore(sc);
file->private_data = buf;
return 0;
}
static const struct file_operations fops_regdump = {
.open = open_file_regdump,
.read = ath9k_debugfs_read_buf,
.release = ath9k_debugfs_release_buf,
.owner = THIS_MODULE,
.llseek = default_llseek,/* read accesses f_pos */
};
static ssize_t read_file_dump_nfcal(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
struct ath_hw *ah = sc->sc_ah;
struct ath9k_nfcal_hist *h = sc->caldata.nfCalHist;
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_conf *conf = &common->hw->conf;
u32 len = 0, size = 1500;
u32 i, j;
ssize_t retval = 0;
char *buf;
u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask;
u8 nread;
buf = kzalloc(size, GFP_KERNEL);
if (!buf)
return -ENOMEM;
len += snprintf(buf + len, size - len,
"Channel Noise Floor : %d\n", ah->noise);
len += snprintf(buf + len, size - len,
"Chain | privNF | # Readings | NF Readings\n");
for (i = 0; i < NUM_NF_READINGS; i++) {
if (!(chainmask & (1 << i)) ||
((i >= AR5416_MAX_CHAINS) && !conf_is_ht40(conf)))
continue;
nread = AR_PHY_CCA_FILTERWINDOW_LENGTH - h[i].invalidNFcount;
len += snprintf(buf + len, size - len, " %d\t %d\t %d\t\t",
i, h[i].privNF, nread);
for (j = 0; j < nread; j++)
len += snprintf(buf + len, size - len,
" %d", h[i].nfCalBuffer[j]);
len += snprintf(buf + len, size - len, "\n");
}
if (len > size)
len = size;
retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
kfree(buf);
return retval;
}
static const struct file_operations fops_dump_nfcal = {
.read = read_file_dump_nfcal,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static ssize_t read_file_base_eeprom(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
struct ath_hw *ah = sc->sc_ah;
u32 len = 0, size = 1500;
ssize_t retval = 0;
char *buf;
buf = kzalloc(size, GFP_KERNEL);
if (!buf)
return -ENOMEM;
len = ah->eep_ops->dump_eeprom(ah, true, buf, len, size);
retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
kfree(buf);
return retval;
}
static const struct file_operations fops_base_eeprom = {
.read = read_file_base_eeprom,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static ssize_t read_file_modal_eeprom(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
struct ath_hw *ah = sc->sc_ah;
u32 len = 0, size = 6000;
char *buf;
size_t retval;
buf = kzalloc(size, GFP_KERNEL);
if (buf == NULL)
return -ENOMEM;
len = ah->eep_ops->dump_eeprom(ah, false, buf, len, size);
retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
kfree(buf);
return retval;
}
static const struct file_operations fops_modal_eeprom = {
.read = read_file_modal_eeprom,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
#ifdef CONFIG_ATH9K_MAC_DEBUG
void ath9k_debug_samp_bb_mac(struct ath_softc *sc)
{
#define ATH_SAMP_DBG(c) (sc->debug.bb_mac_samp[sc->debug.sampidx].c)
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
unsigned long flags;
int i;
ath9k_ps_wakeup(sc);
spin_lock_bh(&sc->debug.samp_lock);
spin_lock_irqsave(&common->cc_lock, flags);
ath_hw_cycle_counters_update(common);
ATH_SAMP_DBG(cc.cycles) = common->cc_ani.cycles;
ATH_SAMP_DBG(cc.rx_busy) = common->cc_ani.rx_busy;
ATH_SAMP_DBG(cc.rx_frame) = common->cc_ani.rx_frame;
ATH_SAMP_DBG(cc.tx_frame) = common->cc_ani.tx_frame;
spin_unlock_irqrestore(&common->cc_lock, flags);
ATH_SAMP_DBG(noise) = ah->noise;
REG_WRITE_D(ah, AR_MACMISC,
((AR_MACMISC_DMA_OBS_LINE_8 << AR_MACMISC_DMA_OBS_S) |
(AR_MACMISC_MISC_OBS_BUS_1 <<
AR_MACMISC_MISC_OBS_BUS_MSB_S)));
for (i = 0; i < ATH9K_NUM_DMA_DEBUG_REGS; i++)
ATH_SAMP_DBG(dma_dbg_reg_vals[i]) = REG_READ_D(ah,
AR_DMADBG_0 + (i * sizeof(u32)));
ATH_SAMP_DBG(pcu_obs) = REG_READ_D(ah, AR_OBS_BUS_1);
ATH_SAMP_DBG(pcu_cr) = REG_READ_D(ah, AR_CR);
memcpy(ATH_SAMP_DBG(nfCalHist), sc->caldata.nfCalHist,
sizeof(ATH_SAMP_DBG(nfCalHist)));
sc->debug.sampidx = (sc->debug.sampidx + 1) % ATH_DBG_MAX_SAMPLES;
spin_unlock_bh(&sc->debug.samp_lock);
ath9k_ps_restore(sc);
#undef ATH_SAMP_DBG
}
static int open_file_bb_mac_samps(struct inode *inode, struct file *file)
{
#define ATH_SAMP_DBG(c) bb_mac_samp[sampidx].c
struct ath_softc *sc = inode->i_private;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_conf *conf = &common->hw->conf;
struct ath_dbg_bb_mac_samp *bb_mac_samp;
struct ath9k_nfcal_hist *h;
int i, j, qcuOffset = 0, dcuOffset = 0;
u32 *qcuBase, *dcuBase, size = 30000, len = 0;
u32 sampidx = 0;
u8 *buf;
u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask;
u8 nread;
if (test_bit(SC_OP_INVALID, &sc->sc_flags))
return -EAGAIN;
buf = vmalloc(size);
if (!buf)
return -ENOMEM;
bb_mac_samp = vmalloc(sizeof(*bb_mac_samp) * ATH_DBG_MAX_SAMPLES);
if (!bb_mac_samp) {
vfree(buf);
return -ENOMEM;
}
/* Account the current state too */
ath9k_debug_samp_bb_mac(sc);
spin_lock_bh(&sc->debug.samp_lock);
memcpy(bb_mac_samp, sc->debug.bb_mac_samp,
sizeof(*bb_mac_samp) * ATH_DBG_MAX_SAMPLES);
len += snprintf(buf + len, size - len,
"Current Sample Index: %d\n", sc->debug.sampidx);
spin_unlock_bh(&sc->debug.samp_lock);
len += snprintf(buf + len, size - len,
"Raw DMA Debug Dump:\n");
len += snprintf(buf + len, size - len, "Sample |\t");
for (i = 0; i < ATH9K_NUM_DMA_DEBUG_REGS; i++)
len += snprintf(buf + len, size - len, " DMA Reg%d |\t", i);
len += snprintf(buf + len, size - len, "\n");
for (sampidx = 0; sampidx < ATH_DBG_MAX_SAMPLES; sampidx++) {
len += snprintf(buf + len, size - len, "%d\t", sampidx);
for (i = 0; i < ATH9K_NUM_DMA_DEBUG_REGS; i++)
len += snprintf(buf + len, size - len, " %08x\t",
ATH_SAMP_DBG(dma_dbg_reg_vals[i]));
len += snprintf(buf + len, size - len, "\n");
}
len += snprintf(buf + len, size - len, "\n");
len += snprintf(buf + len, size - len,
"Sample Num QCU: chain_st fsp_ok fsp_st DCU: chain_st\n");
for (sampidx = 0; sampidx < ATH_DBG_MAX_SAMPLES; sampidx++) {
qcuBase = &ATH_SAMP_DBG(dma_dbg_reg_vals[0]);
dcuBase = &ATH_SAMP_DBG(dma_dbg_reg_vals[4]);
for (i = 0; i < ATH9K_NUM_QUEUES; i++,
qcuOffset += 4, dcuOffset += 5) {
if (i == 8) {
qcuOffset = 0;
qcuBase++;
}
if (i == 6) {
dcuOffset = 0;
dcuBase++;
}
if (!sc->debug.stats.txstats[i].queued)
continue;
len += snprintf(buf + len, size - len,
"%4d %7d %2x %1x %2x %2x\n",
sampidx, i,
(*qcuBase & (0x7 << qcuOffset)) >> qcuOffset,
(*qcuBase & (0x8 << qcuOffset)) >>
(qcuOffset + 3),
ATH_SAMP_DBG(dma_dbg_reg_vals[2]) &
(0x7 << (i * 3)) >> (i * 3),
(*dcuBase & (0x1f << dcuOffset)) >> dcuOffset);
}
len += snprintf(buf + len, size - len, "\n");
}
len += snprintf(buf + len, size - len,
"samp qcu_sh qcu_fh qcu_comp dcu_comp dcu_arb dcu_fp "
"ch_idle_dur ch_idle_dur_val txfifo_val0 txfifo_val1 "
"txfifo_dcu0 txfifo_dcu1 pcu_obs AR_CR\n");
for (sampidx = 0; sampidx < ATH_DBG_MAX_SAMPLES; sampidx++) {
qcuBase = &ATH_SAMP_DBG(dma_dbg_reg_vals[0]);
dcuBase = &ATH_SAMP_DBG(dma_dbg_reg_vals[4]);
len += snprintf(buf + len, size - len, "%4d %5x %5x ", sampidx,
(ATH_SAMP_DBG(dma_dbg_reg_vals[3]) & 0x003c0000) >> 18,
(ATH_SAMP_DBG(dma_dbg_reg_vals[3]) & 0x03c00000) >> 22);
len += snprintf(buf + len, size - len, "%7x %8x ",
(ATH_SAMP_DBG(dma_dbg_reg_vals[3]) & 0x1c000000) >> 26,
(ATH_SAMP_DBG(dma_dbg_reg_vals[6]) & 0x3));
len += snprintf(buf + len, size - len, "%7x %7x ",
(ATH_SAMP_DBG(dma_dbg_reg_vals[5]) & 0x06000000) >> 25,
(ATH_SAMP_DBG(dma_dbg_reg_vals[5]) & 0x38000000) >> 27);
len += snprintf(buf + len, size - len, "%7d %12d ",
(ATH_SAMP_DBG(dma_dbg_reg_vals[6]) & 0x000003fc) >> 2,
(ATH_SAMP_DBG(dma_dbg_reg_vals[6]) & 0x00000400) >> 10);
len += snprintf(buf + len, size - len, "%12d %12d ",
(ATH_SAMP_DBG(dma_dbg_reg_vals[6]) & 0x00000800) >> 11,
(ATH_SAMP_DBG(dma_dbg_reg_vals[6]) & 0x00001000) >> 12);
len += snprintf(buf + len, size - len, "%12d %12d ",
(ATH_SAMP_DBG(dma_dbg_reg_vals[6]) & 0x0001e000) >> 13,
(ATH_SAMP_DBG(dma_dbg_reg_vals[6]) & 0x001e0000) >> 17);
len += snprintf(buf + len, size - len, "0x%07x 0x%07x\n",
ATH_SAMP_DBG(pcu_obs), ATH_SAMP_DBG(pcu_cr));
}
len += snprintf(buf + len, size - len,
"Sample ChNoise Chain privNF #Reading Readings\n");
for (sampidx = 0; sampidx < ATH_DBG_MAX_SAMPLES; sampidx++) {
h = ATH_SAMP_DBG(nfCalHist);
if (!ATH_SAMP_DBG(noise))
continue;
for (i = 0; i < NUM_NF_READINGS; i++) {
if (!(chainmask & (1 << i)) ||
((i >= AR5416_MAX_CHAINS) && !conf_is_ht40(conf)))
continue;
nread = AR_PHY_CCA_FILTERWINDOW_LENGTH -
h[i].invalidNFcount;
len += snprintf(buf + len, size - len,
"%4d %5d %4d\t %d\t %d\t",
sampidx, ATH_SAMP_DBG(noise),
i, h[i].privNF, nread);
for (j = 0; j < nread; j++)
len += snprintf(buf + len, size - len,
" %d", h[i].nfCalBuffer[j]);
len += snprintf(buf + len, size - len, "\n");
}
}
len += snprintf(buf + len, size - len, "\nCycle counters:\n"
"Sample Total Rxbusy Rxframes Txframes\n");
for (sampidx = 0; sampidx < ATH_DBG_MAX_SAMPLES; sampidx++) {
if (!ATH_SAMP_DBG(cc.cycles))
continue;
len += snprintf(buf + len, size - len,
"%4d %08x %08x %08x %08x\n",
sampidx, ATH_SAMP_DBG(cc.cycles),
ATH_SAMP_DBG(cc.rx_busy),
ATH_SAMP_DBG(cc.rx_frame),
ATH_SAMP_DBG(cc.tx_frame));
}
len += snprintf(buf + len, size - len, "Tx status Dump :\n");
len += snprintf(buf + len, size - len,
"Sample rssi:- ctl0 ctl1 ctl2 ext0 ext1 ext2 comb "
"isok rts_fail data_fail rate tid qid "
"ba_low ba_high tx_before(ms)\n");
for (sampidx = 0; sampidx < ATH_DBG_MAX_SAMPLES; sampidx++) {
for (i = 0; i < ATH_DBG_MAX_SAMPLES; i++) {
if (!ATH_SAMP_DBG(ts[i].jiffies))
continue;
len += snprintf(buf + len, size - len, "%-14d"
"%-4d %-4d %-4d %-4d %-4d %-4d %-4d %-4d %-8d "
"%-9d %-4d %-3d %-3d %08x %08x %-11d\n",
sampidx,
ATH_SAMP_DBG(ts[i].rssi_ctl0),
ATH_SAMP_DBG(ts[i].rssi_ctl1),
ATH_SAMP_DBG(ts[i].rssi_ctl2),
ATH_SAMP_DBG(ts[i].rssi_ext0),
ATH_SAMP_DBG(ts[i].rssi_ext1),
ATH_SAMP_DBG(ts[i].rssi_ext2),
ATH_SAMP_DBG(ts[i].rssi),
ATH_SAMP_DBG(ts[i].isok),
ATH_SAMP_DBG(ts[i].rts_fail_cnt),
ATH_SAMP_DBG(ts[i].data_fail_cnt),
ATH_SAMP_DBG(ts[i].rateindex),
ATH_SAMP_DBG(ts[i].tid),
ATH_SAMP_DBG(ts[i].qid),
ATH_SAMP_DBG(ts[i].ba_low),
ATH_SAMP_DBG(ts[i].ba_high),
jiffies_to_msecs(jiffies -
ATH_SAMP_DBG(ts[i].jiffies)));
}
}
len += snprintf(buf + len, size - len, "Rx status Dump :\n");
len += snprintf(buf + len, size - len, "Sample rssi:- ctl0 ctl1 ctl2 "
"ext0 ext1 ext2 comb beacon ant rate rx_before(ms)\n");
for (sampidx = 0; sampidx < ATH_DBG_MAX_SAMPLES; sampidx++) {
for (i = 0; i < ATH_DBG_MAX_SAMPLES; i++) {
if (!ATH_SAMP_DBG(rs[i].jiffies))
continue;
len += snprintf(buf + len, size - len, "%-14d"
"%-4d %-4d %-4d %-4d %-4d %-4d %-4d %-9s %-2d %02x %-13d\n",
sampidx,
ATH_SAMP_DBG(rs[i].rssi_ctl0),
ATH_SAMP_DBG(rs[i].rssi_ctl1),
ATH_SAMP_DBG(rs[i].rssi_ctl2),
ATH_SAMP_DBG(rs[i].rssi_ext0),
ATH_SAMP_DBG(rs[i].rssi_ext1),
ATH_SAMP_DBG(rs[i].rssi_ext2),
ATH_SAMP_DBG(rs[i].rssi),
ATH_SAMP_DBG(rs[i].is_mybeacon) ?
"True" : "False",
ATH_SAMP_DBG(rs[i].antenna),
ATH_SAMP_DBG(rs[i].rate),
jiffies_to_msecs(jiffies -
ATH_SAMP_DBG(rs[i].jiffies)));
}
}
vfree(bb_mac_samp);
file->private_data = buf;
return 0;
#undef ATH_SAMP_DBG
}
static const struct file_operations fops_samps = {
.open = open_file_bb_mac_samps,
.read = ath9k_debugfs_read_buf,
.release = ath9k_debugfs_release_buf,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
#endif
#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
static ssize_t read_file_btcoex(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_softc *sc = file->private_data;
u32 len = 0, size = 1500;
char *buf;
size_t retval;
buf = kzalloc(size, GFP_KERNEL);
if (buf == NULL)
return -ENOMEM;
if (!sc->sc_ah->common.btcoex_enabled) {
len = snprintf(buf, size, "%s\n",
"BTCOEX is disabled");
goto exit;
}
len = ath9k_dump_btcoex(sc, buf, size);
exit:
retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
kfree(buf);
return retval;
}
static const struct file_operations fops_btcoex = {
.read = read_file_btcoex,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
#endif
static ssize_t read_file_node_stat(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath_node *an = file->private_data;
struct ath_softc *sc = an->sc;
struct ath_atx_tid *tid;
struct ath_atx_ac *ac;
struct ath_txq *txq;
u32 len = 0, size = 4096;
char *buf;
size_t retval;
int tidno, acno;
buf = kzalloc(size, GFP_KERNEL);
if (buf == NULL)
return -ENOMEM;
if (!an->sta->ht_cap.ht_supported) {
len = snprintf(buf, size, "%s\n",
"HT not supported");
goto exit;
}
len = snprintf(buf, size, "Max-AMPDU: %d\n",
an->maxampdu);
len += snprintf(buf + len, size - len, "MPDU Density: %d\n\n",
an->mpdudensity);
len += snprintf(buf + len, size - len,
"%2s%7s\n", "AC", "SCHED");
for (acno = 0, ac = &an->ac[acno];
acno < IEEE80211_NUM_ACS; acno++, ac++) {
txq = ac->txq;
ath_txq_lock(sc, txq);
len += snprintf(buf + len, size - len,
"%2d%7d\n",
acno, ac->sched);
ath_txq_unlock(sc, txq);
}
len += snprintf(buf + len, size - len,
"\n%3s%11s%10s%10s%10s%10s%9s%6s%8s\n",
"TID", "SEQ_START", "SEQ_NEXT", "BAW_SIZE",
"BAW_HEAD", "BAW_TAIL", "BAR_IDX", "SCHED", "PAUSED");
for (tidno = 0, tid = &an->tid[tidno];
tidno < IEEE80211_NUM_TIDS; tidno++, tid++) {
txq = tid->ac->txq;
ath_txq_lock(sc, txq);
len += snprintf(buf + len, size - len,
"%3d%11d%10d%10d%10d%10d%9d%6d%8d\n",
tid->tidno, tid->seq_start, tid->seq_next,
tid->baw_size, tid->baw_head, tid->baw_tail,
tid->bar_index, tid->sched, tid->paused);
ath_txq_unlock(sc, txq);
}
exit:
retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
kfree(buf);
return retval;
}
static const struct file_operations fops_node_stat = {
.read = read_file_node_stat,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
void ath9k_sta_add_debugfs(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
struct dentry *dir)
{
struct ath_node *an = (struct ath_node *)sta->drv_priv;
an->node_stat = debugfs_create_file("node_stat", S_IRUGO,
dir, an, &fops_node_stat);
}
void ath9k_sta_remove_debugfs(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
struct dentry *dir)
{
struct ath_node *an = (struct ath_node *)sta->drv_priv;
debugfs_remove(an->node_stat);
}
/* Ethtool support for get-stats */
#define AMKSTR(nm) #nm "_BE", #nm "_BK", #nm "_VI", #nm "_VO"
static const char ath9k_gstrings_stats[][ETH_GSTRING_LEN] = {
"tx_pkts_nic",
"tx_bytes_nic",
"rx_pkts_nic",
"rx_bytes_nic",
AMKSTR(d_tx_pkts),
AMKSTR(d_tx_bytes),
AMKSTR(d_tx_mpdus_queued),
AMKSTR(d_tx_mpdus_completed),
AMKSTR(d_tx_mpdu_xretries),
AMKSTR(d_tx_aggregates),
AMKSTR(d_tx_ampdus_queued_hw),
AMKSTR(d_tx_ampdus_queued_sw),
AMKSTR(d_tx_ampdus_completed),
AMKSTR(d_tx_ampdu_retries),
AMKSTR(d_tx_ampdu_xretries),
AMKSTR(d_tx_fifo_underrun),
AMKSTR(d_tx_op_exceeded),
AMKSTR(d_tx_timer_expiry),
AMKSTR(d_tx_desc_cfg_err),
AMKSTR(d_tx_data_underrun),
AMKSTR(d_tx_delim_underrun),
"d_rx_decrypt_crc_err",
"d_rx_phy_err",
"d_rx_mic_err",
"d_rx_pre_delim_crc_err",
"d_rx_post_delim_crc_err",
"d_rx_decrypt_busy_err",
"d_rx_phyerr_radar",
"d_rx_phyerr_ofdm_timing",
"d_rx_phyerr_cck_timing",
};
#define ATH9K_SSTATS_LEN ARRAY_SIZE(ath9k_gstrings_stats)
void ath9k_get_et_strings(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
u32 sset, u8 *data)
{
if (sset == ETH_SS_STATS)
memcpy(data, *ath9k_gstrings_stats,
sizeof(ath9k_gstrings_stats));
}
int ath9k_get_et_sset_count(struct ieee80211_hw *hw,
struct ieee80211_vif *vif, int sset)
{
if (sset == ETH_SS_STATS)
return ATH9K_SSTATS_LEN;
return 0;
}
#define AWDATA(elem) \
do { \
data[i++] = sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_BE)].elem; \
data[i++] = sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_BK)].elem; \
data[i++] = sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_VI)].elem; \
data[i++] = sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_VO)].elem; \
} while (0)
#define AWDATA_RX(elem) \
do { \
data[i++] = sc->debug.stats.rxstats.elem; \
} while (0)
void ath9k_get_et_stats(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ethtool_stats *stats, u64 *data)
{
struct ath_softc *sc = hw->priv;
int i = 0;
data[i++] = (sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_BE)].tx_pkts_all +
sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_BK)].tx_pkts_all +
sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_VI)].tx_pkts_all +
sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_VO)].tx_pkts_all);
data[i++] = (sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_BE)].tx_bytes_all +
sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_BK)].tx_bytes_all +
sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_VI)].tx_bytes_all +
sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_VO)].tx_bytes_all);
AWDATA_RX(rx_pkts_all);
AWDATA_RX(rx_bytes_all);
AWDATA(tx_pkts_all);
AWDATA(tx_bytes_all);
AWDATA(queued);
AWDATA(completed);
AWDATA(xretries);
AWDATA(a_aggr);
AWDATA(a_queued_hw);
AWDATA(a_queued_sw);
AWDATA(a_completed);
AWDATA(a_retries);
AWDATA(a_xretries);
AWDATA(fifo_underrun);
AWDATA(xtxop);
AWDATA(timer_exp);
AWDATA(desc_cfg_err);
AWDATA(data_underrun);
AWDATA(delim_underrun);
AWDATA_RX(decrypt_crc_err);
AWDATA_RX(phy_err);
AWDATA_RX(mic_err);
AWDATA_RX(pre_delim_crc_err);
AWDATA_RX(post_delim_crc_err);
AWDATA_RX(decrypt_busy_err);
AWDATA_RX(phy_err_stats[ATH9K_PHYERR_RADAR]);
AWDATA_RX(phy_err_stats[ATH9K_PHYERR_OFDM_TIMING]);
AWDATA_RX(phy_err_stats[ATH9K_PHYERR_CCK_TIMING]);
WARN_ON(i != ATH9K_SSTATS_LEN);
}
int ath9k_init_debug(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
struct ath_softc *sc = (struct ath_softc *) common->priv;
sc->debug.debugfs_phy = debugfs_create_dir("ath9k",
sc->hw->wiphy->debugfsdir);
if (!sc->debug.debugfs_phy)
return -ENOMEM;
#ifdef CONFIG_ATH_DEBUG
debugfs_create_file("debug", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
sc, &fops_debug);
#endif
ath9k_dfs_init_debug(sc);
debugfs_create_file("dma", S_IRUSR, sc->debug.debugfs_phy, sc,
&fops_dma);
debugfs_create_file("interrupt", S_IRUSR, sc->debug.debugfs_phy, sc,
&fops_interrupt);
debugfs_create_file("xmit", S_IRUSR, sc->debug.debugfs_phy, sc,
&fops_xmit);
debugfs_create_file("queues", S_IRUSR, sc->debug.debugfs_phy, sc,
&fops_queues);
debugfs_create_u32("qlen_bk", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
&sc->tx.txq_max_pending[IEEE80211_AC_BK]);
debugfs_create_u32("qlen_be", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
&sc->tx.txq_max_pending[IEEE80211_AC_BE]);
debugfs_create_u32("qlen_vi", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
&sc->tx.txq_max_pending[IEEE80211_AC_VI]);
debugfs_create_u32("qlen_vo", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
&sc->tx.txq_max_pending[IEEE80211_AC_VO]);
debugfs_create_file("misc", S_IRUSR, sc->debug.debugfs_phy, sc,
&fops_misc);
debugfs_create_file("reset", S_IRUSR, sc->debug.debugfs_phy, sc,
&fops_reset);
debugfs_create_file("recv", S_IRUSR, sc->debug.debugfs_phy, sc,
&fops_recv);
debugfs_create_file("rx_chainmask", S_IRUSR | S_IWUSR,
sc->debug.debugfs_phy, sc, &fops_rx_chainmask);
debugfs_create_file("tx_chainmask", S_IRUSR | S_IWUSR,
sc->debug.debugfs_phy, sc, &fops_tx_chainmask);
debugfs_create_file("disable_ani", S_IRUSR | S_IWUSR,
sc->debug.debugfs_phy, sc, &fops_disable_ani);
debugfs_create_bool("paprd", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
&sc->sc_ah->config.enable_paprd);
debugfs_create_file("regidx", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
sc, &fops_regidx);
debugfs_create_file("regval", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
sc, &fops_regval);
debugfs_create_bool("ignore_extcca", S_IRUSR | S_IWUSR,
sc->debug.debugfs_phy,
&ah->config.cwm_ignore_extcca);
debugfs_create_file("regdump", S_IRUSR, sc->debug.debugfs_phy, sc,
&fops_regdump);
debugfs_create_file("dump_nfcal", S_IRUSR, sc->debug.debugfs_phy, sc,
&fops_dump_nfcal);
debugfs_create_file("base_eeprom", S_IRUSR, sc->debug.debugfs_phy, sc,
&fops_base_eeprom);
debugfs_create_file("modal_eeprom", S_IRUSR, sc->debug.debugfs_phy, sc,
&fops_modal_eeprom);
#ifdef CONFIG_ATH9K_MAC_DEBUG
debugfs_create_file("samples", S_IRUSR, sc->debug.debugfs_phy, sc,
&fops_samps);
#endif
debugfs_create_u32("gpio_mask", S_IRUSR | S_IWUSR,
sc->debug.debugfs_phy, &sc->sc_ah->gpio_mask);
debugfs_create_u32("gpio_val", S_IRUSR | S_IWUSR,
sc->debug.debugfs_phy, &sc->sc_ah->gpio_val);
debugfs_create_file("diversity", S_IRUSR | S_IWUSR,
sc->debug.debugfs_phy, sc, &fops_ant_diversity);
#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
debugfs_create_file("btcoex", S_IRUSR, sc->debug.debugfs_phy, sc,
&fops_btcoex);
#endif
return 0;
}