dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/drivers/net/mlx4/main.c

1361 lines
36 KiB
C
Raw Normal View History

IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
/*
* Copyright (c) 2004, 2005 Topspin Communications. All rights reserved.
* Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
mlx4: Update/add Mellanox Technologies copyright lines to mlx4 driver files Update existing Mellanox copyright lines to 2008, and add such lines to files where they are missing. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-25 17:32:52 +00:00
* Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
* Copyright (c) 2006, 2007 Cisco Systems, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
#include <linux/mlx4/device.h>
#include <linux/mlx4/doorbell.h>
#include "mlx4.h"
#include "fw.h"
#include "icm.h"
MODULE_AUTHOR("Roland Dreier");
MODULE_DESCRIPTION("Mellanox ConnectX HCA low-level driver");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_VERSION(DRV_VERSION);
mlx4_core: Add link type autosensing When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-19 02:45:11 +00:00
struct workqueue_struct *mlx4_wq;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
#ifdef CONFIG_MLX4_DEBUG
int mlx4_debug_level = 0;
module_param_named(debug_level, mlx4_debug_level, int, 0644);
MODULE_PARM_DESC(debug_level, "Enable debug tracing if > 0");
#endif /* CONFIG_MLX4_DEBUG */
#ifdef CONFIG_PCI_MSI
mlx4_core: Enable MSI-X by default Recover from MSI-X errors by automatically falling back on regular interrupt, instead of asking the user to do this manually. This makes it possible to enable MSI-X by default, and will make it possible to get rid of the msi_x module option in the future. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-07 13:08:28 +00:00
static int msi_x = 1;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
module_param(msi_x, int, 0444);
MODULE_PARM_DESC(msi_x, "attempt to use MSI-X if nonzero");
#else /* CONFIG_PCI_MSI */
#define msi_x (0)
#endif /* CONFIG_PCI_MSI */
IB: Avoid marking __devinitdata as const Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-05 04:20:44 +00:00
static char mlx4_version[] __devinitdata =
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
DRV_NAME ": Mellanox ConnectX core driver v"
DRV_VERSION " (" DRV_RELDATE ")\n";
static struct mlx4_profile default_profile = {
mlx4_core: Increase max number of QPs to 128K With the advent large clusters which utilize multicore hosts, 64K QPs is not enough. We should increase the default maximum for QPs to 128K. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-17 04:09:32 +00:00
.num_qp = 1 << 17,
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
.num_srq = 1 << 16,
IB/mlx4: Increase max outstanding RDMA reads as target Change the maximum number of outstanding RDMA reads allowed as a target from 4 to 16 to per QP. This allows RDMA read operations to pipeline better. Pointed out by Dotan Barak and Sagi Rotem. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-17 10:11:43 +00:00
.rdmarc_per_qp = 1 << 4,
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
.num_cq = 1 << 16,
.num_mcg = 1 << 13,
.num_mpt = 1 << 17,
.num_mtt = 1 << 20,
};
mlx4_core: Support multiple pre-reserved QP regions For ethernet support, we need to reserve QPs for the ethernet and fibre channel driver. The QPs are reserved at the end of the QP table. (This way we assure that they are aligned to their size) We need to consider these reserved ranges in bitmap creation, so we extend the mlx4 bitmap utility functions to allow reserved ranges at both the bottom and the top of the range. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 17:25:29 +00:00
static int log_num_mac = 2;
module_param_named(log_num_mac, log_num_mac, int, 0444);
MODULE_PARM_DESC(log_num_mac, "Log2 max number of MACs per ETH port (1-7)");
static int log_num_vlan;
module_param_named(log_num_vlan, log_num_vlan, int, 0444);
MODULE_PARM_DESC(log_num_vlan, "Log2 max number of VLANs per ETH port (0-7)");
static int use_prio;
module_param_named(use_prio, use_prio, bool, 0444);
MODULE_PARM_DESC(use_prio, "Enable steering by VLAN priority on ETH ports "
"(0/1, default 0)");
mlx4_core: Add module parameter for number of MTTs per segment The current MTT allocator uses kmalloc() to allocate a buffer for its buddy allocator, and thus is limited in the amount of MTT segments that it can control. As a result, the size of memory that can be registered is limited too. This patch uses a module parameter to control the number of MTT entries that each segment represents, allowing more memory to be registered with the same number of segments. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-05-27 21:38:34 +00:00
static int log_mtts_per_seg = ilog2(MLX4_MTT_ENTRY_PER_SEG);
module_param_named(log_mtts_per_seg, log_mtts_per_seg, int, 0444);
mlx4_core: Allow log_mtts_per_seg up to 7 As there are now machines with a lot more physical memory, we need to be able to register more memory. This patch lifts the upper limit of log_mtts_per_seg from 5 to 7, increasing the amount of memory that can be registered. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-20 06:42:38 +00:00
MODULE_PARM_DESC(log_mtts_per_seg, "Log2 number of MTT entries per segment (1-7)");
mlx4_core: Add module parameter for number of MTTs per segment The current MTT allocator uses kmalloc() to allocate a buffer for its buddy allocator, and thus is limited in the amount of MTT segments that it can control. As a result, the size of memory that can be registered is limited too. This patch uses a module parameter to control the number of MTT entries that each segment represents, allowing more memory to be registered with the same number of segments. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-05-27 21:38:34 +00:00
mlx4_core: Add link type autosensing When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-19 02:45:11 +00:00
int mlx4_check_port_params(struct mlx4_dev *dev,
enum mlx4_port_type *port_type)
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
{
int i;
for (i = 0; i < dev->caps.num_ports - 1; i++) {
mlx4_core: Add link type autosensing When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-19 02:45:11 +00:00
if (port_type[i] != port_type[i + 1]) {
if (!(dev->caps.flags & MLX4_DEV_CAP_FLAG_DPDP)) {
mlx4_err(dev, "Only same port types supported "
"on this HCA, aborting.\n");
return -EINVAL;
}
if (port_type[i] == MLX4_PORT_TYPE_ETH &&
port_type[i + 1] == MLX4_PORT_TYPE_IB)
return -EINVAL;
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
}
}
for (i = 0; i < dev->caps.num_ports; i++) {
if (!(port_type[i] & dev->caps.supported_type[i+1])) {
mlx4_err(dev, "Requested port type for port %d is not "
"supported on this HCA\n", i + 1);
return -EINVAL;
}
}
return 0;
}
static void mlx4_set_port_mask(struct mlx4_dev *dev)
{
int i;
dev->caps.port_mask = 0;
for (i = 1; i <= dev->caps.num_ports; ++i)
if (dev->caps.port_type[i] == MLX4_PORT_TYPE_IB)
dev->caps.port_mask |= 1 << (i - 1);
}
mlx4_core: Fix section mismatches Commit ee49bd93 ("mlx4_core: Reset device when internal error is detected") introduced some section mismatch problems when CONFIG_HOTPLUG=n, because the error recovery code tears down and reinitializes the device after everything is loaded, which ends up calling into lots of code marked __devinit and __devexit from regular .text. Fix this by getting rid of these now-incorrect section markers. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-10 22:43:54 +00:00
static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
{
int err;
IB/mlx4: Handle FW command interface rev 3 Upcoming firmware introduces command interface revision 3, which changes the way port capabilities are queried and set. Update the driver to handle both the new and old command interfaces by adding a new MLX4_FLAG_OLD_PORT_CMDS that it is set after querying the firmware interface revision and then using the correct interface based on the setting of the flag. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-18 15:15:02 +00:00
int i;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
err = mlx4_QUERY_DEV_CAP(dev, dev_cap);
if (err) {
mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting.\n");
return err;
}
if (dev_cap->min_page_sz > PAGE_SIZE) {
mlx4_err(dev, "HCA minimum page size of %d bigger than "
"kernel PAGE_SIZE of %ld, aborting.\n",
dev_cap->min_page_sz, PAGE_SIZE);
return -ENODEV;
}
if (dev_cap->num_ports > MLX4_MAX_PORTS) {
mlx4_err(dev, "HCA has %d ports, but we only support %d, "
"aborting.\n",
dev_cap->num_ports, MLX4_MAX_PORTS);
return -ENODEV;
}
if (dev_cap->uar_size > pci_resource_len(dev->pdev, 2)) {
mlx4_err(dev, "HCA reported UAR size of 0x%x bigger than "
"PCI resource 2 size of 0x%llx, aborting.\n",
dev_cap->uar_size,
(unsigned long long) pci_resource_len(dev->pdev, 2));
return -ENODEV;
}
dev->caps.num_ports = dev_cap->num_ports;
IB/mlx4: Handle FW command interface rev 3 Upcoming firmware introduces command interface revision 3, which changes the way port capabilities are queried and set. Update the driver to handle both the new and old command interfaces by adding a new MLX4_FLAG_OLD_PORT_CMDS that it is set after querying the firmware interface revision and then using the correct interface based on the setting of the flag. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-18 15:15:02 +00:00
for (i = 1; i <= dev->caps.num_ports; ++i) {
dev->caps.vl_cap[i] = dev_cap->max_vl[i];
mlx4_core: Get ethernet MTU and default address from firmware Get maximum ethernet MTU and default MAC address from the firmware QUERY_DEV_CAP command. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 17:56:48 +00:00
dev->caps.ib_mtu_cap[i] = dev_cap->ib_mtu[i];
IB/mlx4: Handle FW command interface rev 3 Upcoming firmware introduces command interface revision 3, which changes the way port capabilities are queried and set. Update the driver to handle both the new and old command interfaces by adding a new MLX4_FLAG_OLD_PORT_CMDS that it is set after querying the firmware interface revision and then using the correct interface based on the setting of the flag. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-18 15:15:02 +00:00
dev->caps.gid_table_len[i] = dev_cap->max_gids[i];
dev->caps.pkey_table_len[i] = dev_cap->max_pkeys[i];
dev->caps.port_width_cap[i] = dev_cap->max_port_width[i];
mlx4_core: Get ethernet MTU and default address from firmware Get maximum ethernet MTU and default MAC address from the firmware QUERY_DEV_CAP command. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 17:56:48 +00:00
dev->caps.eth_mtu_cap[i] = dev_cap->eth_mtu[i];
dev->caps.def_mac[i] = dev_cap->def_mac[i];
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
dev->caps.supported_type[i] = dev_cap->supported_port_types[i];
mlx4_en: Fixing report in Ethtool get_settings The report now based on query from FW, giving the correct tranciever type and link speed. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24 03:46:23 +00:00
dev->caps.trans_type[i] = dev_cap->trans_type[i];
dev->caps.vendor_oui[i] = dev_cap->vendor_oui[i];
dev->caps.wavelength[i] = dev_cap->wavelength[i];
dev->caps.trans_code[i] = dev_cap->trans_code[i];
IB/mlx4: Handle FW command interface rev 3 Upcoming firmware introduces command interface revision 3, which changes the way port capabilities are queried and set. Update the driver to handle both the new and old command interfaces by adding a new MLX4_FLAG_OLD_PORT_CMDS that it is set after querying the firmware interface revision and then using the correct interface based on the setting of the flag. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-18 15:15:02 +00:00
}
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
dev->caps.num_uars = dev_cap->uar_size / PAGE_SIZE;
dev->caps.local_ca_ack_delay = dev_cap->local_ca_ack_delay;
dev->caps.bf_reg_size = dev_cap->bf_reg_size;
dev->caps.bf_regs_per_page = dev_cap->bf_regs_per_page;
dev->caps.max_sq_sg = dev_cap->max_sq_sg;
dev->caps.max_rq_sg = dev_cap->max_rq_sg;
dev->caps.max_wqes = dev_cap->max_qp_sz;
dev->caps.max_qp_init_rdma = dev_cap->max_requester_per_qp;
dev->caps.max_srq_wqes = dev_cap->max_srq_sz;
dev->caps.max_srq_sge = dev_cap->max_rq_sg - 1;
dev->caps.reserved_srqs = dev_cap->reserved_srqs;
dev->caps.max_sq_desc_sz = dev_cap->max_sq_desc_sz;
dev->caps.max_rq_desc_sz = dev_cap->max_rq_desc_sz;
dev->caps.num_qp_per_mgm = MLX4_QP_PER_MGM;
/*
* Subtract 1 from the limit because we need to allocate a
* spare CQE so the HCA HW can tell the difference between an
* empty CQ and a full CQ.
*/
dev->caps.max_cqes = dev_cap->max_cq_sz - 1;
dev->caps.reserved_cqs = dev_cap->reserved_cqs;
dev->caps.reserved_eqs = dev_cap->reserved_eqs;
mlx4_core: Add module parameter for number of MTTs per segment The current MTT allocator uses kmalloc() to allocate a buffer for its buddy allocator, and thus is limited in the amount of MTT segments that it can control. As a result, the size of memory that can be registered is limited too. This patch uses a module parameter to control the number of MTT entries that each segment represents, allowing more memory to be registered with the same number of segments. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-05-27 21:38:34 +00:00
dev->caps.mtts_per_seg = 1 << log_mtts_per_seg;
mlx4_core: Fix meaning of dev->caps.reserved_mtts Everything that uses caps.reserved_mtts expects it to be a count of MTT segments, not MTT entries. So convert the value that the FW gives us to a count of segments. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-10 02:59:16 +00:00
dev->caps.reserved_mtts = DIV_ROUND_UP(dev_cap->reserved_mtts,
mlx4_core: Add module parameter for number of MTTs per segment The current MTT allocator uses kmalloc() to allocate a buffer for its buddy allocator, and thus is limited in the amount of MTT segments that it can control. As a result, the size of memory that can be registered is limited too. This patch uses a module parameter to control the number of MTT entries that each segment represents, allowing more memory to be registered with the same number of segments. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-05-27 21:38:34 +00:00
dev->caps.mtts_per_seg);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
dev->caps.reserved_mrws = dev_cap->reserved_mrws;
dev->caps.reserved_uars = dev_cap->reserved_uars;
dev->caps.reserved_pds = dev_cap->reserved_pds;
mlx4_core: Add module parameter for number of MTTs per segment The current MTT allocator uses kmalloc() to allocate a buffer for its buddy allocator, and thus is limited in the amount of MTT segments that it can control. As a result, the size of memory that can be registered is limited too. This patch uses a module parameter to control the number of MTT entries that each segment represents, allowing more memory to be registered with the same number of segments. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-05-27 21:38:34 +00:00
dev->caps.mtt_entry_sz = dev->caps.mtts_per_seg * dev_cap->mtt_entry_sz;
mlx4_core: Get the maximum message size from reported device capabilities Get the maximum message size from the device capabilities returned from the QUERY_DEV_CAP firmware command, rather than hard-coding 2 GB. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-26 12:55:28 +00:00
dev->caps.max_msg_sz = dev_cap->max_msg_sz;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
dev->caps.page_size_cap = ~(u32) (dev_cap->min_page_sz - 1);
dev->caps.flags = dev_cap->flags;
IB/mlx4: Add support for memory management extensions and local DMA L_Key Add support for the following operations to mlx4 when device firmware supports them: - Send with invalidate and local invalidate send queue work requests; - Allocate/free fast register MRs; - Allocate/free fast register MR page lists; - Fast register MR send queue work requests; - Local DMA L_Key. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-23 15:12:26 +00:00
dev->caps.bmme_flags = dev_cap->bmme_flags;
dev->caps.reserved_lkey = dev_cap->reserved_lkey;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
dev->caps.stat_rate_support = dev_cap->stat_rate_support;
mlx4_en: UDP RSS support Adding capability for RSS for UDP traffic, hashing is done based on IP addresses and UDP port number. The support depends on HW/FW capabilities. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24 03:46:42 +00:00
dev->caps.udp_rss = dev_cap->udp_rss;
mlx4_en: Added self diagnostics test implementation The selftest includes 5 features: 1. Interrupt test: Executing commands and receiving command completion on all our interrupt vectors. 2. Link test: Verifying we are connected to valid link partner. 3. Speed test: Check that we negotiated link speed correctly. 4. Registers test: Activate HW health check command. 5. Loopback test: Send a packet on loopback interface and catch it on RX side. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24 03:46:18 +00:00
dev->caps.loopback_support = dev_cap->loopback_support;
IB/mlx4: Add IPoIB LSO support Add TSO support to the mlx4_ib driver. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-17 04:09:27 +00:00
dev->caps.max_gso_sz = dev_cap->max_gso_sz;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
mlx4_core: Support multiple pre-reserved QP regions For ethernet support, we need to reserve QPs for the ethernet and fibre channel driver. The QPs are reserved at the end of the QP table. (This way we assure that they are aligned to their size) We need to consider these reserved ranges in bitmap creation, so we extend the mlx4 bitmap utility functions to allow reserved ranges at both the bottom and the top of the range. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 17:25:29 +00:00
dev->caps.log_num_macs = log_num_mac;
dev->caps.log_num_vlans = log_num_vlan;
dev->caps.log_num_prios = use_prio ? 3 : 0;
for (i = 1; i <= dev->caps.num_ports; ++i) {
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
if (dev->caps.supported_type[i] != MLX4_PORT_TYPE_ETH)
dev->caps.port_type[i] = MLX4_PORT_TYPE_IB;
else
dev->caps.port_type[i] = MLX4_PORT_TYPE_ETH;
mlx4_core: Add link type autosensing When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-19 02:45:11 +00:00
dev->caps.possible_type[i] = dev->caps.port_type[i];
mlx4_priv(dev)->sense.sense_allowed[i] =
dev->caps.supported_type[i] == MLX4_PORT_TYPE_AUTO;
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
mlx4_core: Support multiple pre-reserved QP regions For ethernet support, we need to reserve QPs for the ethernet and fibre channel driver. The QPs are reserved at the end of the QP table. (This way we assure that they are aligned to their size) We need to consider these reserved ranges in bitmap creation, so we extend the mlx4 bitmap utility functions to allow reserved ranges at both the bottom and the top of the range. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 17:25:29 +00:00
if (dev->caps.log_num_macs > dev_cap->log_max_macs[i]) {
dev->caps.log_num_macs = dev_cap->log_max_macs[i];
mlx4_warn(dev, "Requested number of MACs is too much "
"for port %d, reducing to %d.\n",
i, 1 << dev->caps.log_num_macs);
}
if (dev->caps.log_num_vlans > dev_cap->log_max_vlans[i]) {
dev->caps.log_num_vlans = dev_cap->log_max_vlans[i];
mlx4_warn(dev, "Requested number of VLANs is too much "
"for port %d, reducing to %d.\n",
i, 1 << dev->caps.log_num_vlans);
}
}
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
mlx4_set_port_mask(dev);
mlx4_core: Support multiple pre-reserved QP regions For ethernet support, we need to reserve QPs for the ethernet and fibre channel driver. The QPs are reserved at the end of the QP table. (This way we assure that they are aligned to their size) We need to consider these reserved ranges in bitmap creation, so we extend the mlx4 bitmap utility functions to allow reserved ranges at both the bottom and the top of the range. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 17:25:29 +00:00
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW] = dev_cap->reserved_qps;
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_ETH_ADDR] =
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_ADDR] =
(1 << dev->caps.log_num_macs) *
(1 << dev->caps.log_num_vlans) *
(1 << dev->caps.log_num_prios) *
dev->caps.num_ports;
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_EXCH] = MLX4_NUM_FEXCH;
dev->caps.reserved_qps = dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW] +
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_ETH_ADDR] +
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_ADDR] +
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_EXCH];
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
return 0;
}
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
/*
* Change the port configuration of the device.
* Every user of this function must hold the port mutex.
*/
mlx4_core: Add link type autosensing When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-19 02:45:11 +00:00
int mlx4_change_port_types(struct mlx4_dev *dev,
enum mlx4_port_type *port_types)
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
{
int err = 0;
int change = 0;
int port;
for (port = 0; port < dev->caps.num_ports; port++) {
mlx4_core: Add link type autosensing When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-19 02:45:11 +00:00
/* Change the port type only if the new type is different
* from the current, and not set to Auto */
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
if (port_types[port] != dev->caps.port_type[port + 1]) {
change = 1;
dev->caps.port_type[port + 1] = port_types[port];
}
}
if (change) {
mlx4_unregister_device(dev);
for (port = 1; port <= dev->caps.num_ports; port++) {
mlx4_CLOSE_PORT(dev, port);
err = mlx4_SET_PORT(dev, port);
if (err) {
mlx4_err(dev, "Failed to set port %d, "
"aborting\n", port);
goto out;
}
}
mlx4_set_port_mask(dev);
err = mlx4_register_device(dev);
}
out:
return err;
}
static ssize_t show_port_type(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info,
port_attr);
struct mlx4_dev *mdev = info->dev;
mlx4_core: Add link type autosensing When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-19 02:45:11 +00:00
char type[8];
sprintf(type, "%s",
(mdev->caps.port_type[info->port] == MLX4_PORT_TYPE_IB) ?
"ib" : "eth");
if (mdev->caps.possible_type[info->port] == MLX4_PORT_TYPE_AUTO)
sprintf(buf, "auto (%s)\n", type);
else
sprintf(buf, "%s\n", type);
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
mlx4_core: Add link type autosensing When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-19 02:45:11 +00:00
return strlen(buf);
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
}
static ssize_t set_port_type(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info,
port_attr);
struct mlx4_dev *mdev = info->dev;
struct mlx4_priv *priv = mlx4_priv(mdev);
enum mlx4_port_type types[MLX4_MAX_PORTS];
mlx4_core: Add link type autosensing When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-19 02:45:11 +00:00
enum mlx4_port_type new_types[MLX4_MAX_PORTS];
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
int i;
int err = 0;
if (!strcmp(buf, "ib\n"))
info->tmp_type = MLX4_PORT_TYPE_IB;
else if (!strcmp(buf, "eth\n"))
info->tmp_type = MLX4_PORT_TYPE_ETH;
mlx4_core: Add link type autosensing When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-19 02:45:11 +00:00
else if (!strcmp(buf, "auto\n"))
info->tmp_type = MLX4_PORT_TYPE_AUTO;
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
else {
mlx4_err(mdev, "%s is not supported port type\n", buf);
return -EINVAL;
}
mlx4_core: Add link type autosensing When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-19 02:45:11 +00:00
mlx4_stop_sense(mdev);
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
mutex_lock(&priv->port_mutex);
mlx4_core: Add link type autosensing When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-19 02:45:11 +00:00
/* Possible type is always the one that was delivered */
mdev->caps.possible_type[info->port] = info->tmp_type;
for (i = 0; i < mdev->caps.num_ports; i++) {
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
types[i] = priv->port[i+1].tmp_type ? priv->port[i+1].tmp_type :
mlx4_core: Add link type autosensing When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-19 02:45:11 +00:00
mdev->caps.possible_type[i+1];
if (types[i] == MLX4_PORT_TYPE_AUTO)
types[i] = mdev->caps.port_type[i+1];
}
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
mlx4_core: Add link type autosensing When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-19 02:45:11 +00:00
if (!(mdev->caps.flags & MLX4_DEV_CAP_FLAG_DPDP)) {
for (i = 1; i <= mdev->caps.num_ports; i++) {
if (mdev->caps.possible_type[i] == MLX4_PORT_TYPE_AUTO) {
mdev->caps.possible_type[i] = mdev->caps.port_type[i];
err = -EINVAL;
}
}
}
if (err) {
mlx4_err(mdev, "Auto sensing is not supported on this HCA. "
"Set only 'eth' or 'ib' for both ports "
"(should be the same)\n");
goto out;
}
mlx4_do_sense_ports(mdev, new_types, types);
err = mlx4_check_port_params(mdev, new_types);
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
if (err)
goto out;
mlx4_core: Add link type autosensing When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-19 02:45:11 +00:00
/* We are about to apply the changes after the configuration
* was verified, no need to remember the temporary types
* any more */
for (i = 0; i < mdev->caps.num_ports; i++)
priv->port[i + 1].tmp_type = 0;
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
mlx4_core: Add link type autosensing When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-19 02:45:11 +00:00
err = mlx4_change_port_types(mdev, new_types);
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
out:
mlx4_core: Add link type autosensing When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-19 02:45:11 +00:00
mlx4_start_sense(mdev);
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
mutex_unlock(&priv->port_mutex);
return err ? err : count;
}
mlx4_core: Fix more section mismatches Commit 3d73c288 ("mlx4_core: Fix section mismatches") fixed some of the section mismatches introduced when error recovery was added, but there were still more cases of errory recovery code calling into __devinit code from regular .text. Fix this by getting rid of the now-incorrect __devinit annotations. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-05 04:20:41 +00:00
static int mlx4_load_fw(struct mlx4_dev *dev)
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
{
struct mlx4_priv *priv = mlx4_priv(dev);
int err;
priv->fw.fw_icm = mlx4_alloc_icm(dev, priv->fw.fw_pages,
mlx4_core: Support ICM tables in coherent memory Enable having ICM tables in coherent memory, and use coherent memory for the dMPT table. This will allow writing MPT entries for MRs both via the SW2HW_MPT command and also directly by the driver for FMR remapping without needing to flush or worry about cacheline boundaries. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-01 09:28:20 +00:00
GFP_HIGHUSER | __GFP_NOWARN, 0);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (!priv->fw.fw_icm) {
mlx4_err(dev, "Couldn't allocate FW area, aborting.\n");
return -ENOMEM;
}
err = mlx4_MAP_FA(dev, priv->fw.fw_icm);
if (err) {
mlx4_err(dev, "MAP_FA command failed, aborting.\n");
goto err_free;
}
err = mlx4_RUN_FW(dev);
if (err) {
mlx4_err(dev, "RUN_FW command failed, aborting.\n");
goto err_unmap_fa;
}
return 0;
err_unmap_fa:
mlx4_UNMAP_FA(dev);
err_free:
mlx4_core: Support ICM tables in coherent memory Enable having ICM tables in coherent memory, and use coherent memory for the dMPT table. This will allow writing MPT entries for MRs both via the SW2HW_MPT command and also directly by the driver for FMR remapping without needing to flush or worry about cacheline boundaries. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-01 09:28:20 +00:00
mlx4_free_icm(dev, priv->fw.fw_icm, 0);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
return err;
}
mlx4_core: Fix more section mismatches Commit 3d73c288 ("mlx4_core: Fix section mismatches") fixed some of the section mismatches introduced when error recovery was added, but there were still more cases of errory recovery code calling into __devinit code from regular .text. Fix this by getting rid of the now-incorrect __devinit annotations. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-05 04:20:41 +00:00
static int mlx4_init_cmpt_table(struct mlx4_dev *dev, u64 cmpt_base,
int cmpt_entry_sz)
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
{
struct mlx4_priv *priv = mlx4_priv(dev);
int err;
err = mlx4_init_icm_table(dev, &priv->qp_table.cmpt_table,
cmpt_base +
((u64) (MLX4_CMPT_TYPE_QP *
cmpt_entry_sz) << MLX4_CMPT_SHIFT),
cmpt_entry_sz, dev->caps.num_qps,
mlx4_core: Support multiple pre-reserved QP regions For ethernet support, we need to reserve QPs for the ethernet and fibre channel driver. The QPs are reserved at the end of the QP table. (This way we assure that they are aligned to their size) We need to consider these reserved ranges in bitmap creation, so we extend the mlx4 bitmap utility functions to allow reserved ranges at both the bottom and the top of the range. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 17:25:29 +00:00
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW],
0, 0);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (err)
goto err;
err = mlx4_init_icm_table(dev, &priv->srq_table.cmpt_table,
cmpt_base +
((u64) (MLX4_CMPT_TYPE_SRQ *
cmpt_entry_sz) << MLX4_CMPT_SHIFT),
cmpt_entry_sz, dev->caps.num_srqs,
mlx4_core: Support ICM tables in coherent memory Enable having ICM tables in coherent memory, and use coherent memory for the dMPT table. This will allow writing MPT entries for MRs both via the SW2HW_MPT command and also directly by the driver for FMR remapping without needing to flush or worry about cacheline boundaries. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-01 09:28:20 +00:00
dev->caps.reserved_srqs, 0, 0);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (err)
goto err_qp;
err = mlx4_init_icm_table(dev, &priv->cq_table.cmpt_table,
cmpt_base +
((u64) (MLX4_CMPT_TYPE_CQ *
cmpt_entry_sz) << MLX4_CMPT_SHIFT),
cmpt_entry_sz, dev->caps.num_cqs,
mlx4_core: Support ICM tables in coherent memory Enable having ICM tables in coherent memory, and use coherent memory for the dMPT table. This will allow writing MPT entries for MRs both via the SW2HW_MPT command and also directly by the driver for FMR remapping without needing to flush or worry about cacheline boundaries. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-01 09:28:20 +00:00
dev->caps.reserved_cqs, 0, 0);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (err)
goto err_srq;
err = mlx4_init_icm_table(dev, &priv->eq_table.cmpt_table,
cmpt_base +
((u64) (MLX4_CMPT_TYPE_EQ *
cmpt_entry_sz) << MLX4_CMPT_SHIFT),
cmpt_entry_sz,
mlx4_core: Add support for multiple completion event vectors When using MSI-X mode, create a completion event queue for each CPU. Report the number of completion EQs in a new struct mlx4_caps member, num_comp_vectors, and extend the mlx4_cq_alloc() interface with a vector parameter so that consumers can specify which completion EQ should be used to report events for the CQ being created. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-22 15:15:03 +00:00
dev->caps.num_eqs, dev->caps.num_eqs, 0, 0);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (err)
goto err_cq;
return 0;
err_cq:
mlx4_cleanup_icm_table(dev, &priv->cq_table.cmpt_table);
err_srq:
mlx4_cleanup_icm_table(dev, &priv->srq_table.cmpt_table);
err_qp:
mlx4_cleanup_icm_table(dev, &priv->qp_table.cmpt_table);
err:
return err;
}
mlx4_core: Fix section mismatches Commit ee49bd93 ("mlx4_core: Reset device when internal error is detected") introduced some section mismatch problems when CONFIG_HOTPLUG=n, because the error recovery code tears down and reinitializes the device after everything is loaded, which ends up calling into lots of code marked __devinit and __devexit from regular .text. Fix this by getting rid of these now-incorrect section markers. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-10 22:43:54 +00:00
static int mlx4_init_icm(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap,
struct mlx4_init_hca_param *init_hca, u64 icm_size)
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
{
struct mlx4_priv *priv = mlx4_priv(dev);
u64 aux_pages;
int err;
err = mlx4_SET_ICM_SIZE(dev, icm_size, &aux_pages);
if (err) {
mlx4_err(dev, "SET_ICM_SIZE command failed, aborting.\n");
return err;
}
mlx4_dbg(dev, "%lld KB of HCA context requires %lld KB aux memory.\n",
(unsigned long long) icm_size >> 10,
(unsigned long long) aux_pages << 2);
priv->fw.aux_icm = mlx4_alloc_icm(dev, aux_pages,
mlx4_core: Support ICM tables in coherent memory Enable having ICM tables in coherent memory, and use coherent memory for the dMPT table. This will allow writing MPT entries for MRs both via the SW2HW_MPT command and also directly by the driver for FMR remapping without needing to flush or worry about cacheline boundaries. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-01 09:28:20 +00:00
GFP_HIGHUSER | __GFP_NOWARN, 0);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (!priv->fw.aux_icm) {
mlx4_err(dev, "Couldn't allocate aux memory, aborting.\n");
return -ENOMEM;
}
err = mlx4_MAP_ICM_AUX(dev, priv->fw.aux_icm);
if (err) {
mlx4_err(dev, "MAP_ICM_AUX command failed, aborting.\n");
goto err_free_aux;
}
err = mlx4_init_cmpt_table(dev, init_hca->cmpt_base, dev_cap->cmpt_entry_sz);
if (err) {
mlx4_err(dev, "Failed to map cMPT context memory, aborting.\n");
goto err_unmap_aux;
}
mlx4_core: Allocate and map sufficient ICM memory for EQ context The current implementation allocates a single host page for EQ context memory, which was OK when we only allocated a few EQs. However, since we now allocate an EQ for each CPU core, this patch removes the hard-coded limit (which we exceed with 4 KB pages and 128 byte EQ context entries with 32 CPUs) and uses the same ICM table code as all other context tables, which ends up simplifying the code quite a bit while fixing the problem. This problem was actually hit in practice on a dual-socket Nehalem box with 16 real hardware threads and sufficiently odd ACPI tables that it shows on boot SMP: Allowing 32 CPUs, 16 hotplug CPUs so num_possible_cpus() ends up 32, and mlx4 ends up creating 33 MSI-X interrupts and 33 EQs. This mlx4 bug means that mlx4 can't even initialize at all on this quite mainstream system. Cc: <stable@kernel.org> Reported-by: Eli Cohen <eli@mellanox.co.il> Tested-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-06 03:24:49 +00:00
err = mlx4_init_icm_table(dev, &priv->eq_table.table,
init_hca->eqc_base, dev_cap->eqc_entry_sz,
dev->caps.num_eqs, dev->caps.num_eqs,
0, 0);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (err) {
mlx4_err(dev, "Failed to map EQ context memory, aborting.\n");
goto err_unmap_cmpt;
}
mlx4_core: Write MTTs from CPU instead with of WRITE_MTT FW command Write MTT entries directly to ICM from the driver (eliminating use of WRITE_MTT command). This reduces the number of FW commands needed to register an MR by at least a factor of 2 and speeds up memory registration significantly. This code will also be used to implement FMRs. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-01 09:28:53 +00:00
/*
* Reserved MTT entries must be aligned up to a cacheline
* boundary, since the FW will write to them, while the driver
* writes to all other MTT entries. (The variable
* dev->caps.mtt_entry_sz below is really the MTT segment
* size, not the raw entry size)
*/
dev->caps.reserved_mtts =
ALIGN(dev->caps.reserved_mtts * dev->caps.mtt_entry_sz,
dma_get_cache_alignment()) / dev->caps.mtt_entry_sz;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
err = mlx4_init_icm_table(dev, &priv->mr_table.mtt_table,
init_hca->mtt_base,
dev->caps.mtt_entry_sz,
dev->caps.num_mtt_segs,
mlx4_core: Support ICM tables in coherent memory Enable having ICM tables in coherent memory, and use coherent memory for the dMPT table. This will allow writing MPT entries for MRs both via the SW2HW_MPT command and also directly by the driver for FMR remapping without needing to flush or worry about cacheline boundaries. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-01 09:28:20 +00:00
dev->caps.reserved_mtts, 1, 0);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (err) {
mlx4_err(dev, "Failed to map MTT context memory, aborting.\n");
goto err_unmap_eq;
}
err = mlx4_init_icm_table(dev, &priv->mr_table.dmpt_table,
init_hca->dmpt_base,
dev_cap->dmpt_entry_sz,
dev->caps.num_mpts,
mlx4_core: Support ICM tables in coherent memory Enable having ICM tables in coherent memory, and use coherent memory for the dMPT table. This will allow writing MPT entries for MRs both via the SW2HW_MPT command and also directly by the driver for FMR remapping without needing to flush or worry about cacheline boundaries. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-01 09:28:20 +00:00
dev->caps.reserved_mrws, 1, 1);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (err) {
mlx4_err(dev, "Failed to map dMPT context memory, aborting.\n");
goto err_unmap_mtt;
}
err = mlx4_init_icm_table(dev, &priv->qp_table.qp_table,
init_hca->qpc_base,
dev_cap->qpc_entry_sz,
dev->caps.num_qps,
mlx4_core: Support multiple pre-reserved QP regions For ethernet support, we need to reserve QPs for the ethernet and fibre channel driver. The QPs are reserved at the end of the QP table. (This way we assure that they are aligned to their size) We need to consider these reserved ranges in bitmap creation, so we extend the mlx4 bitmap utility functions to allow reserved ranges at both the bottom and the top of the range. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 17:25:29 +00:00
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW],
0, 0);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (err) {
mlx4_err(dev, "Failed to map QP context memory, aborting.\n");
goto err_unmap_dmpt;
}
err = mlx4_init_icm_table(dev, &priv->qp_table.auxc_table,
init_hca->auxc_base,
dev_cap->aux_entry_sz,
dev->caps.num_qps,
mlx4_core: Support multiple pre-reserved QP regions For ethernet support, we need to reserve QPs for the ethernet and fibre channel driver. The QPs are reserved at the end of the QP table. (This way we assure that they are aligned to their size) We need to consider these reserved ranges in bitmap creation, so we extend the mlx4 bitmap utility functions to allow reserved ranges at both the bottom and the top of the range. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 17:25:29 +00:00
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW],
0, 0);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (err) {
mlx4_err(dev, "Failed to map AUXC context memory, aborting.\n");
goto err_unmap_qp;
}
err = mlx4_init_icm_table(dev, &priv->qp_table.altc_table,
init_hca->altc_base,
dev_cap->altc_entry_sz,
dev->caps.num_qps,
mlx4_core: Support multiple pre-reserved QP regions For ethernet support, we need to reserve QPs for the ethernet and fibre channel driver. The QPs are reserved at the end of the QP table. (This way we assure that they are aligned to their size) We need to consider these reserved ranges in bitmap creation, so we extend the mlx4 bitmap utility functions to allow reserved ranges at both the bottom and the top of the range. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 17:25:29 +00:00
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW],
0, 0);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (err) {
mlx4_err(dev, "Failed to map ALTC context memory, aborting.\n");
goto err_unmap_auxc;
}
err = mlx4_init_icm_table(dev, &priv->qp_table.rdmarc_table,
init_hca->rdmarc_base,
dev_cap->rdmarc_entry_sz << priv->qp_table.rdmarc_shift,
dev->caps.num_qps,
mlx4_core: Support multiple pre-reserved QP regions For ethernet support, we need to reserve QPs for the ethernet and fibre channel driver. The QPs are reserved at the end of the QP table. (This way we assure that they are aligned to their size) We need to consider these reserved ranges in bitmap creation, so we extend the mlx4 bitmap utility functions to allow reserved ranges at both the bottom and the top of the range. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 17:25:29 +00:00
dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW],
0, 0);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (err) {
mlx4_err(dev, "Failed to map RDMARC context memory, aborting\n");
goto err_unmap_altc;
}
err = mlx4_init_icm_table(dev, &priv->cq_table.table,
init_hca->cqc_base,
dev_cap->cqc_entry_sz,
dev->caps.num_cqs,
mlx4_core: Support ICM tables in coherent memory Enable having ICM tables in coherent memory, and use coherent memory for the dMPT table. This will allow writing MPT entries for MRs both via the SW2HW_MPT command and also directly by the driver for FMR remapping without needing to flush or worry about cacheline boundaries. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-01 09:28:20 +00:00
dev->caps.reserved_cqs, 0, 0);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (err) {
mlx4_err(dev, "Failed to map CQ context memory, aborting.\n");
goto err_unmap_rdmarc;
}
err = mlx4_init_icm_table(dev, &priv->srq_table.table,
init_hca->srqc_base,
dev_cap->srq_entry_sz,
dev->caps.num_srqs,
mlx4_core: Support ICM tables in coherent memory Enable having ICM tables in coherent memory, and use coherent memory for the dMPT table. This will allow writing MPT entries for MRs both via the SW2HW_MPT command and also directly by the driver for FMR remapping without needing to flush or worry about cacheline boundaries. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-01 09:28:20 +00:00
dev->caps.reserved_srqs, 0, 0);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (err) {
mlx4_err(dev, "Failed to map SRQ context memory, aborting.\n");
goto err_unmap_cq;
}
/*
* It's not strictly required, but for simplicity just map the
* whole multicast group table now. The table isn't very big
* and it's a lot easier than trying to track ref counts.
*/
err = mlx4_init_icm_table(dev, &priv->mcg_table.table,
init_hca->mc_base, MLX4_MGM_ENTRY_SIZE,
dev->caps.num_mgms + dev->caps.num_amgms,
dev->caps.num_mgms + dev->caps.num_amgms,
mlx4_core: Support ICM tables in coherent memory Enable having ICM tables in coherent memory, and use coherent memory for the dMPT table. This will allow writing MPT entries for MRs both via the SW2HW_MPT command and also directly by the driver for FMR remapping without needing to flush or worry about cacheline boundaries. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-01 09:28:20 +00:00
0, 0);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (err) {
mlx4_err(dev, "Failed to map MCG context memory, aborting.\n");
goto err_unmap_srq;
}
return 0;
err_unmap_srq:
mlx4_cleanup_icm_table(dev, &priv->srq_table.table);
err_unmap_cq:
mlx4_cleanup_icm_table(dev, &priv->cq_table.table);
err_unmap_rdmarc:
mlx4_cleanup_icm_table(dev, &priv->qp_table.rdmarc_table);
err_unmap_altc:
mlx4_cleanup_icm_table(dev, &priv->qp_table.altc_table);
err_unmap_auxc:
mlx4_cleanup_icm_table(dev, &priv->qp_table.auxc_table);
err_unmap_qp:
mlx4_cleanup_icm_table(dev, &priv->qp_table.qp_table);
err_unmap_dmpt:
mlx4_cleanup_icm_table(dev, &priv->mr_table.dmpt_table);
err_unmap_mtt:
mlx4_cleanup_icm_table(dev, &priv->mr_table.mtt_table);
err_unmap_eq:
mlx4_core: Allocate and map sufficient ICM memory for EQ context The current implementation allocates a single host page for EQ context memory, which was OK when we only allocated a few EQs. However, since we now allocate an EQ for each CPU core, this patch removes the hard-coded limit (which we exceed with 4 KB pages and 128 byte EQ context entries with 32 CPUs) and uses the same ICM table code as all other context tables, which ends up simplifying the code quite a bit while fixing the problem. This problem was actually hit in practice on a dual-socket Nehalem box with 16 real hardware threads and sufficiently odd ACPI tables that it shows on boot SMP: Allowing 32 CPUs, 16 hotplug CPUs so num_possible_cpus() ends up 32, and mlx4 ends up creating 33 MSI-X interrupts and 33 EQs. This mlx4 bug means that mlx4 can't even initialize at all on this quite mainstream system. Cc: <stable@kernel.org> Reported-by: Eli Cohen <eli@mellanox.co.il> Tested-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-06 03:24:49 +00:00
mlx4_cleanup_icm_table(dev, &priv->eq_table.table);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
err_unmap_cmpt:
mlx4_cleanup_icm_table(dev, &priv->eq_table.cmpt_table);
mlx4_cleanup_icm_table(dev, &priv->cq_table.cmpt_table);
mlx4_cleanup_icm_table(dev, &priv->srq_table.cmpt_table);
mlx4_cleanup_icm_table(dev, &priv->qp_table.cmpt_table);
err_unmap_aux:
mlx4_UNMAP_ICM_AUX(dev);
err_free_aux:
mlx4_core: Support ICM tables in coherent memory Enable having ICM tables in coherent memory, and use coherent memory for the dMPT table. This will allow writing MPT entries for MRs both via the SW2HW_MPT command and also directly by the driver for FMR remapping without needing to flush or worry about cacheline boundaries. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-01 09:28:20 +00:00
mlx4_free_icm(dev, priv->fw.aux_icm, 0);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
return err;
}
static void mlx4_free_icms(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
mlx4_cleanup_icm_table(dev, &priv->mcg_table.table);
mlx4_cleanup_icm_table(dev, &priv->srq_table.table);
mlx4_cleanup_icm_table(dev, &priv->cq_table.table);
mlx4_cleanup_icm_table(dev, &priv->qp_table.rdmarc_table);
mlx4_cleanup_icm_table(dev, &priv->qp_table.altc_table);
mlx4_cleanup_icm_table(dev, &priv->qp_table.auxc_table);
mlx4_cleanup_icm_table(dev, &priv->qp_table.qp_table);
mlx4_cleanup_icm_table(dev, &priv->mr_table.dmpt_table);
mlx4_cleanup_icm_table(dev, &priv->mr_table.mtt_table);
mlx4_core: Allocate and map sufficient ICM memory for EQ context The current implementation allocates a single host page for EQ context memory, which was OK when we only allocated a few EQs. However, since we now allocate an EQ for each CPU core, this patch removes the hard-coded limit (which we exceed with 4 KB pages and 128 byte EQ context entries with 32 CPUs) and uses the same ICM table code as all other context tables, which ends up simplifying the code quite a bit while fixing the problem. This problem was actually hit in practice on a dual-socket Nehalem box with 16 real hardware threads and sufficiently odd ACPI tables that it shows on boot SMP: Allowing 32 CPUs, 16 hotplug CPUs so num_possible_cpus() ends up 32, and mlx4 ends up creating 33 MSI-X interrupts and 33 EQs. This mlx4 bug means that mlx4 can't even initialize at all on this quite mainstream system. Cc: <stable@kernel.org> Reported-by: Eli Cohen <eli@mellanox.co.il> Tested-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-06 03:24:49 +00:00
mlx4_cleanup_icm_table(dev, &priv->eq_table.table);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
mlx4_cleanup_icm_table(dev, &priv->eq_table.cmpt_table);
mlx4_cleanup_icm_table(dev, &priv->cq_table.cmpt_table);
mlx4_cleanup_icm_table(dev, &priv->srq_table.cmpt_table);
mlx4_cleanup_icm_table(dev, &priv->qp_table.cmpt_table);
mlx4_UNMAP_ICM_AUX(dev);
mlx4_core: Support ICM tables in coherent memory Enable having ICM tables in coherent memory, and use coherent memory for the dMPT table. This will allow writing MPT entries for MRs both via the SW2HW_MPT command and also directly by the driver for FMR remapping without needing to flush or worry about cacheline boundaries. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-01 09:28:20 +00:00
mlx4_free_icm(dev, priv->fw.aux_icm, 0);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
}
static void mlx4_close_hca(struct mlx4_dev *dev)
{
mlx4_CLOSE_HCA(dev, 0);
mlx4_free_icms(dev);
mlx4_UNMAP_FA(dev);
mlx4_core: Support ICM tables in coherent memory Enable having ICM tables in coherent memory, and use coherent memory for the dMPT table. This will allow writing MPT entries for MRs both via the SW2HW_MPT command and also directly by the driver for FMR remapping without needing to flush or worry about cacheline boundaries. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-01 09:28:20 +00:00
mlx4_free_icm(dev, mlx4_priv(dev)->fw.fw_icm, 0);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
}
mlx4_core: Fix section mismatches Commit ee49bd93 ("mlx4_core: Reset device when internal error is detected") introduced some section mismatch problems when CONFIG_HOTPLUG=n, because the error recovery code tears down and reinitializes the device after everything is loaded, which ends up calling into lots of code marked __devinit and __devexit from regular .text. Fix this by getting rid of these now-incorrect section markers. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-10 22:43:54 +00:00
static int mlx4_init_hca(struct mlx4_dev *dev)
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
{
struct mlx4_priv *priv = mlx4_priv(dev);
struct mlx4_adapter adapter;
struct mlx4_dev_cap dev_cap;
mlx4_core: Use MOD_STAT_CFG command to get minimal page size There was a bug in some versions of the mlx4 driver in mlx4_alloc_fmr(), which hardcoded the minimum acceptable page_shift to be 12. However, new ConnectX firmware can support a minimum page_shift of 9 (log_pg_sz of 9 returned by QUERY_DEV_LIM) -- so with old drivers, ib_fmr_alloc() would fail for ULPs using the device minimum when creating FMRs. To preserve firmware compatibility with released mlx4 drivers, the firmware will continue to return 12 as before for log_page_sz in QUERY_DEV_CAP for these drivers. However, to enable new drivers to take advantage of the available smaller page size, the mlx4 driver now first sets the log_pg_sz to the device minimum by setting a log_page_sz value to 0 via the MOD_STAT_CFG command and then reading the real minimum via QUERY_DEV_CAP. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-15 06:48:53 +00:00
struct mlx4_mod_stat_cfg mlx4_cfg;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
struct mlx4_profile profile;
struct mlx4_init_hca_param init_hca;
u64 icm_size;
int err;
err = mlx4_QUERY_FW(dev);
if (err) {
mlx4_core: Handle multi-physical function devices MT26468 (PCI ID 0x6764) devices can expose multiple physical functions. The current driver only handles the primary physical function. For other functions, the QUERY_FW firmware command will fail with the CMD_STAT_MULTI_FUNC_REQ error code. Don't try to drive such devices, but print a message saying the driver is skipping those devices rather than just "QUERY_FW command failed." Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> [ Rather than keeping unsupported devices bound to the driver, simply print a more informative error message and exit - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-07-06 23:10:03 +00:00
if (err == -EACCES)
mlx4_info(dev, "non-primary physical function, skipping.\n");
else
mlx4_err(dev, "QUERY_FW command failed, aborting.\n");
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
return err;
}
err = mlx4_load_fw(dev);
if (err) {
mlx4_err(dev, "Failed to start FW, aborting.\n");
return err;
}
mlx4_core: Use MOD_STAT_CFG command to get minimal page size There was a bug in some versions of the mlx4 driver in mlx4_alloc_fmr(), which hardcoded the minimum acceptable page_shift to be 12. However, new ConnectX firmware can support a minimum page_shift of 9 (log_pg_sz of 9 returned by QUERY_DEV_LIM) -- so with old drivers, ib_fmr_alloc() would fail for ULPs using the device minimum when creating FMRs. To preserve firmware compatibility with released mlx4 drivers, the firmware will continue to return 12 as before for log_page_sz in QUERY_DEV_CAP for these drivers. However, to enable new drivers to take advantage of the available smaller page size, the mlx4 driver now first sets the log_pg_sz to the device minimum by setting a log_page_sz value to 0 via the MOD_STAT_CFG command and then reading the real minimum via QUERY_DEV_CAP. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-15 06:48:53 +00:00
mlx4_cfg.log_pg_sz_m = 1;
mlx4_cfg.log_pg_sz = 0;
err = mlx4_MOD_STAT_CFG(dev, &mlx4_cfg);
if (err)
mlx4_warn(dev, "Failed to override log_pg_sz parameter\n");
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
err = mlx4_dev_cap(dev, &dev_cap);
if (err) {
mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting.\n");
goto err_stop_fw;
}
profile = default_profile;
icm_size = mlx4_make_profile(dev, &profile, &dev_cap, &init_hca);
if ((long long) icm_size < 0) {
err = icm_size;
goto err_stop_fw;
}
init_hca.log_uar_sz = ilog2(dev->caps.num_uars);
err = mlx4_init_icm(dev, &dev_cap, &init_hca, icm_size);
if (err)
goto err_stop_fw;
err = mlx4_INIT_HCA(dev, &init_hca);
if (err) {
mlx4_err(dev, "INIT_HCA command failed, aborting.\n");
goto err_free_icm;
}
err = mlx4_QUERY_ADAPTER(dev, &adapter);
if (err) {
mlx4_err(dev, "QUERY_ADAPTER command failed, aborting.\n");
goto err_close;
}
priv->eq_table.inta_pin = adapter.inta_pin;
IB/mlx4: Display misc device information under /sys/class/infiniband/ display the following device information under /sys/class/infiniband/mlx4_X: board_id, fw_ver, hw_rev, hca_type. This patch makes this information available to userspace utilities such as ibstat and ibv_devinfo. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-09-18 07:14:18 +00:00
memcpy(dev->board_id, adapter.board_id, sizeof dev->board_id);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
return 0;
err_close:
mlx4_core: Avoid double free_icms On the error path of mlx4_init_hca(), mlx4_close_hca() is called, followed by mlx4_free_icms() and mlx4_UNMAP_FA(). But both those functions are also called from mlx4_close_hca(), which leads to a double free. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-06 03:24:49 +00:00
mlx4_CLOSE_HCA(dev, 0);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
err_free_icm:
mlx4_free_icms(dev);
err_stop_fw:
mlx4_UNMAP_FA(dev);
mlx4_core: Support ICM tables in coherent memory Enable having ICM tables in coherent memory, and use coherent memory for the dMPT table. This will allow writing MPT entries for MRs both via the SW2HW_MPT command and also directly by the driver for FMR remapping without needing to flush or worry about cacheline boundaries. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-01 09:28:20 +00:00
mlx4_free_icm(dev, priv->fw.fw_icm, 0);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
return err;
}
mlx4_core: Fix section mismatches Commit ee49bd93 ("mlx4_core: Reset device when internal error is detected") introduced some section mismatch problems when CONFIG_HOTPLUG=n, because the error recovery code tears down and reinitializes the device after everything is loaded, which ends up calling into lots of code marked __devinit and __devexit from regular .text. Fix this by getting rid of these now-incorrect section markers. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-10 22:43:54 +00:00
static int mlx4_setup_hca(struct mlx4_dev *dev)
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
{
struct mlx4_priv *priv = mlx4_priv(dev);
int err;
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
int port;
mlx4_core: Save/restore default port IB capability mask Commit 7ff93f8b ("mlx4_core: Multiple port type support") introduced support for different port types. As part of that support, SET_PORT is invoked to set the port type during driver startup. However, as a side-effect, for IB ports the invocation of this command also sets the port's capability mask to zero (losing the default value set by FW). To fix this, get the default ib port capabilities (via a MAD_IFC Port Info query) during driver startup, and save them for use in the mlx4_SET_PORT command when setting the port-type to Infiniband. This patch fixes problems with subnet manager (SM) failover such as <https://bugs.openfabrics.org/show_bug.cgi?id=1183>, which occurred because the IsTrapSupported bit in the capability mask was zeroed. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-11-29 05:29:46 +00:00
__be32 ib_port_default_caps;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
err = mlx4_init_uar_table(dev);
if (err) {
mlx4_err(dev, "Failed to initialize "
"user access region table, aborting.\n");
return err;
}
err = mlx4_uar_alloc(dev, &priv->driver_uar);
if (err) {
mlx4_err(dev, "Failed to allocate driver access region, "
"aborting.\n");
goto err_uar_table_free;
}
mlx4_{core, ib, en}: Fix driver when sizeof (phys_addr_t) > sizeof (long) Some systems have PCI addresses that don't fit in unsigned long (eg some 32-bit PowerPC 440 systems have 36-bit bus addresses). Fix up mlx4 drivers by using phys_addr_t where appropriate, so we don't truncate any PCI resource addresses before ioremapping them. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-12 17:50:36 +00:00
priv->kar = ioremap((phys_addr_t) priv->driver_uar.pfn << PAGE_SHIFT, PAGE_SIZE);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (!priv->kar) {
mlx4_err(dev, "Couldn't map kernel access region, "
"aborting.\n");
err = -ENOMEM;
goto err_uar_free;
}
err = mlx4_init_pd_table(dev);
if (err) {
mlx4_err(dev, "Failed to initialize "
"protection domain table, aborting.\n");
goto err_kar_unmap;
}
err = mlx4_init_mr_table(dev);
if (err) {
mlx4_err(dev, "Failed to initialize "
"memory region table, aborting.\n");
goto err_pd_table_free;
}
err = mlx4_init_eq_table(dev);
if (err) {
mlx4_err(dev, "Failed to initialize "
"event queue table, aborting.\n");
mlx4_core: Reset device when internal error is detected Reset the device when an internal error is detected. Also, detect errors by polling the error buffer rather than using interrupts. This is more robust and doesn't depend on MSI-X. Remove the old interrupt handler entirely, since we don't want to support two mechanisms for detecting internal errors. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-12 14:50:45 +00:00
goto err_mr_table_free;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
}
err = mlx4_cmd_use_events(dev);
if (err) {
mlx4_err(dev, "Failed to switch to event-driven "
"firmware commands, aborting.\n");
goto err_eq_table_free;
}
err = mlx4_NOP(dev);
if (err) {
mlx4_core: Enable MSI-X by default Recover from MSI-X errors by automatically falling back on regular interrupt, instead of asking the user to do this manually. This makes it possible to enable MSI-X by default, and will make it possible to get rid of the msi_x module option in the future. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-07 13:08:28 +00:00
if (dev->flags & MLX4_FLAG_MSI_X) {
mlx4_warn(dev, "NOP command failed to generate MSI-X "
"interrupt IRQ %d).\n",
mlx4_core: Add support for multiple completion event vectors When using MSI-X mode, create a completion event queue for each CPU. Report the number of completion EQs in a new struct mlx4_caps member, num_comp_vectors, and extend the mlx4_cq_alloc() interface with a vector parameter so that consumers can specify which completion EQ should be used to report events for the CQ being created. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-22 15:15:03 +00:00
priv->eq_table.eq[dev->caps.num_comp_vectors].irq);
mlx4_core: Enable MSI-X by default Recover from MSI-X errors by automatically falling back on regular interrupt, instead of asking the user to do this manually. This makes it possible to enable MSI-X by default, and will make it possible to get rid of the msi_x module option in the future. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-07 13:08:28 +00:00
mlx4_warn(dev, "Trying again without MSI-X.\n");
} else {
mlx4_err(dev, "NOP command failed to generate interrupt "
"(IRQ %d), aborting.\n",
mlx4_core: Add support for multiple completion event vectors When using MSI-X mode, create a completion event queue for each CPU. Report the number of completion EQs in a new struct mlx4_caps member, num_comp_vectors, and extend the mlx4_cq_alloc() interface with a vector parameter so that consumers can specify which completion EQ should be used to report events for the CQ being created. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-22 15:15:03 +00:00
priv->eq_table.eq[dev->caps.num_comp_vectors].irq);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
mlx4_err(dev, "BIOS or ACPI interrupt routing problem?\n");
mlx4_core: Enable MSI-X by default Recover from MSI-X errors by automatically falling back on regular interrupt, instead of asking the user to do this manually. This makes it possible to enable MSI-X by default, and will make it possible to get rid of the msi_x module option in the future. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-07 13:08:28 +00:00
}
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
goto err_cmd_poll;
}
mlx4_dbg(dev, "NOP command IRQ test passed\n");
err = mlx4_init_cq_table(dev);
if (err) {
mlx4_err(dev, "Failed to initialize "
"completion queue table, aborting.\n");
goto err_cmd_poll;
}
err = mlx4_init_srq_table(dev);
if (err) {
mlx4_err(dev, "Failed to initialize "
"shared receive queue table, aborting.\n");
goto err_cq_table_free;
}
err = mlx4_init_qp_table(dev);
if (err) {
mlx4_err(dev, "Failed to initialize "
"queue pair table, aborting.\n");
goto err_srq_table_free;
}
err = mlx4_init_mcg_table(dev);
if (err) {
mlx4_err(dev, "Failed to initialize "
"multicast group table, aborting.\n");
goto err_qp_table_free;
}
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
for (port = 1; port <= dev->caps.num_ports; port++) {
mlx4_core: Save/restore default port IB capability mask Commit 7ff93f8b ("mlx4_core: Multiple port type support") introduced support for different port types. As part of that support, SET_PORT is invoked to set the port type during driver startup. However, as a side-effect, for IB ports the invocation of this command also sets the port's capability mask to zero (losing the default value set by FW). To fix this, get the default ib port capabilities (via a MAD_IFC Port Info query) during driver startup, and save them for use in the mlx4_SET_PORT command when setting the port-type to Infiniband. This patch fixes problems with subnet manager (SM) failover such as <https://bugs.openfabrics.org/show_bug.cgi?id=1183>, which occurred because the IsTrapSupported bit in the capability mask was zeroed. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-11-29 05:29:46 +00:00
ib_port_default_caps = 0;
err = mlx4_get_port_ib_caps(dev, port, &ib_port_default_caps);
if (err)
mlx4_warn(dev, "failed to get port %d default "
"ib capabilities (%d). Continuing with "
"caps = 0\n", port, err);
dev->caps.ib_port_def_cap[port] = ib_port_default_caps;
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
err = mlx4_SET_PORT(dev, port);
if (err) {
mlx4_err(dev, "Failed to set port %d, aborting\n",
port);
goto err_mcg_table_free;
}
}
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
return 0;
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
err_mcg_table_free:
mlx4_cleanup_mcg_table(dev);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
err_qp_table_free:
mlx4_cleanup_qp_table(dev);
err_srq_table_free:
mlx4_cleanup_srq_table(dev);
err_cq_table_free:
mlx4_cleanup_cq_table(dev);
err_cmd_poll:
mlx4_cmd_use_polling(dev);
err_eq_table_free:
mlx4_cleanup_eq_table(dev);
mlx4_core: Reset device when internal error is detected Reset the device when an internal error is detected. Also, detect errors by polling the error buffer rather than using interrupts. This is more robust and doesn't depend on MSI-X. Remove the old interrupt handler entirely, since we don't want to support two mechanisms for detecting internal errors. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-12 14:50:45 +00:00
err_mr_table_free:
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
mlx4_cleanup_mr_table(dev);
err_pd_table_free:
mlx4_cleanup_pd_table(dev);
err_kar_unmap:
iounmap(priv->kar);
err_uar_free:
mlx4_uar_free(dev, &priv->driver_uar);
err_uar_table_free:
mlx4_cleanup_uar_table(dev);
return err;
}
mlx4_core: Fix more section mismatches Commit 3d73c288 ("mlx4_core: Fix section mismatches") fixed some of the section mismatches introduced when error recovery was added, but there were still more cases of errory recovery code calling into __devinit code from regular .text. Fix this by getting rid of the now-incorrect __devinit annotations. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-05 04:20:41 +00:00
static void mlx4_enable_msi_x(struct mlx4_dev *dev)
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
{
struct mlx4_priv *priv = mlx4_priv(dev);
mlx4_core: Add support for multiple completion event vectors When using MSI-X mode, create a completion event queue for each CPU. Report the number of completion EQs in a new struct mlx4_caps member, num_comp_vectors, and extend the mlx4_cq_alloc() interface with a vector parameter so that consumers can specify which completion EQ should be used to report events for the CQ being created. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-22 15:15:03 +00:00
struct msix_entry *entries;
int nreq;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
int err;
int i;
if (msi_x) {
mlx4_core: Fix warning from min() Recent cpumask changes changed num_possible_cpus() from returning an int to returning an unsigned int. This means that doing min(num_possible_cpus(), <int expression>) now produces a warning like drivers/net/mlx4/main.c: In function 'mlx4_enable_msi_x': drivers/net/mlx4/main.c:915: warning: comparison of distinct pointer types lacks a cast Fix this by using min_t(int, ...). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-09 21:14:07 +00:00
nreq = min_t(int, dev->caps.num_eqs - dev->caps.reserved_eqs,
num_possible_cpus() + 1);
mlx4_core: Add support for multiple completion event vectors When using MSI-X mode, create a completion event queue for each CPU. Report the number of completion EQs in a new struct mlx4_caps member, num_comp_vectors, and extend the mlx4_cq_alloc() interface with a vector parameter so that consumers can specify which completion EQ should be used to report events for the CQ being created. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-22 15:15:03 +00:00
entries = kcalloc(nreq, sizeof *entries, GFP_KERNEL);
if (!entries)
goto no_msi;
for (i = 0; i < nreq; ++i)
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
entries[i].entry = i;
mlx4_core: Add support for multiple completion event vectors When using MSI-X mode, create a completion event queue for each CPU. Report the number of completion EQs in a new struct mlx4_caps member, num_comp_vectors, and extend the mlx4_cq_alloc() interface with a vector parameter so that consumers can specify which completion EQ should be used to report events for the CQ being created. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-22 15:15:03 +00:00
retry:
err = pci_enable_msix(dev->pdev, entries, nreq);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (err) {
mlx4_core: Add support for multiple completion event vectors When using MSI-X mode, create a completion event queue for each CPU. Report the number of completion EQs in a new struct mlx4_caps member, num_comp_vectors, and extend the mlx4_cq_alloc() interface with a vector parameter so that consumers can specify which completion EQ should be used to report events for the CQ being created. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-22 15:15:03 +00:00
/* Try again if at least 2 vectors are available */
if (err > 1) {
mlx4_info(dev, "Requested %d vectors, "
"but only %d MSI-X vectors available, "
"trying again\n", nreq, err);
nreq = err;
goto retry;
}
mlx4_core: Fix memory leak in mlx4_enable_msi_x() When the msi_x option is enabled but pci_enable_msix() fails (not enough vectors are available etc), the entries array was not freed on the error path. Signed-off-by: Nicolas Morey-Chaisemartin <nicolas.morey-chaisemartin@ext.bull.net> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-21 17:11:06 +00:00
kfree(entries);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
goto no_msi;
}
mlx4_core: Add support for multiple completion event vectors When using MSI-X mode, create a completion event queue for each CPU. Report the number of completion EQs in a new struct mlx4_caps member, num_comp_vectors, and extend the mlx4_cq_alloc() interface with a vector parameter so that consumers can specify which completion EQ should be used to report events for the CQ being created. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-22 15:15:03 +00:00
dev->caps.num_comp_vectors = nreq - 1;
for (i = 0; i < nreq; ++i)
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
priv->eq_table.eq[i].irq = entries[i].vector;
dev->flags |= MLX4_FLAG_MSI_X;
mlx4_core: Add support for multiple completion event vectors When using MSI-X mode, create a completion event queue for each CPU. Report the number of completion EQs in a new struct mlx4_caps member, num_comp_vectors, and extend the mlx4_cq_alloc() interface with a vector parameter so that consumers can specify which completion EQ should be used to report events for the CQ being created. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-22 15:15:03 +00:00
kfree(entries);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
return;
}
no_msi:
mlx4_core: Add support for multiple completion event vectors When using MSI-X mode, create a completion event queue for each CPU. Report the number of completion EQs in a new struct mlx4_caps member, num_comp_vectors, and extend the mlx4_cq_alloc() interface with a vector parameter so that consumers can specify which completion EQ should be used to report events for the CQ being created. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-22 15:15:03 +00:00
dev->caps.num_comp_vectors = 1;
for (i = 0; i < 2; ++i)
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
priv->eq_table.eq[i].irq = dev->pdev->irq;
}
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
static int mlx4_init_port_info(struct mlx4_dev *dev, int port)
mlx4_core: Ethernet MAC/VLAN management Add support for managing MAC and VLAN filters for each port. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Oren Duer <oren@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 18:44:46 +00:00
{
struct mlx4_port_info *info = &mlx4_priv(dev)->port[port];
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
int err = 0;
mlx4_core: Ethernet MAC/VLAN management Add support for managing MAC and VLAN filters for each port. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Oren Duer <oren@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 18:44:46 +00:00
info->dev = dev;
info->port = port;
mlx4_init_mac_table(dev, &info->mac_table);
mlx4_init_vlan_table(dev, &info->vlan_table);
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
sprintf(info->dev_name, "mlx4_port%d", port);
info->port_attr.attr.name = info->dev_name;
info->port_attr.attr.mode = S_IRUGO | S_IWUSR;
info->port_attr.show = show_port_type;
info->port_attr.store = set_port_type;
sysfs: fix sysfs lockdep warning in mlx4 code This fixes a sysfs lockdep warning in the mlx4 code. Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-15 21:01:55 +00:00
sysfs_attr_init(&info->port_attr.attr);
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
err = device_create_file(&dev->pdev->dev, &info->port_attr);
if (err) {
mlx4_err(dev, "Failed to create file for port %d\n", port);
info->port = -1;
}
return err;
}
static void mlx4_cleanup_port_info(struct mlx4_port_info *info)
{
if (info->port < 0)
return;
device_remove_file(&info->dev->pdev->dev, &info->port_attr);
mlx4_core: Ethernet MAC/VLAN management Add support for managing MAC and VLAN filters for each port. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Oren Duer <oren@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 18:44:46 +00:00
}
mlx4_core: Fix section mismatches Commit ee49bd93 ("mlx4_core: Reset device when internal error is detected") introduced some section mismatch problems when CONFIG_HOTPLUG=n, because the error recovery code tears down and reinitializes the device after everything is loaded, which ends up calling into lots of code marked __devinit and __devexit from regular .text. Fix this by getting rid of these now-incorrect section markers. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-10 22:43:54 +00:00
static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
{
struct mlx4_priv *priv;
struct mlx4_dev *dev;
int err;
mlx4_core: Ethernet MAC/VLAN management Add support for managing MAC and VLAN filters for each port. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Oren Duer <oren@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 18:44:46 +00:00
int port;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
drivers/net/mlx4: Use %pV, pr_<level>, printk_once Remove near duplication of format string constants by using the newly introduced vsprintf extention %pV to reduce text by 20k or so. $ size drivers/net/mlx4/built-in.o* text data bss dec hex filename 161367 1866 48784 212017 33c31 drivers/net/mlx4/built-in.o 142621 1866 46248 190735 2e90f drivers/net/mlx4/built-in.o.new Use printk_once as appropriate. Convert printks to pr_<level>, some bare printks now use pr_cont. Remove now unused #define PFX. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-10 07:22:46 +00:00
pr_info(DRV_NAME ": Initializing %s\n", pci_name(pdev));
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
err = pci_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "Cannot enable PCI device, "
"aborting.\n");
return err;
}
/*
IB/mlx4: Fix incorrect comment mlx4 hardware does not support external DDR memory. Moreover, UAR area (BAR 2) can change depending on FW version. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-17 04:09:35 +00:00
* Check for BARs. We expect 0: 1MB
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
*/
if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM) ||
pci_resource_len(pdev, 0) != 1 << 20) {
dev_err(&pdev->dev, "Missing DCS, aborting.\n");
err = -ENODEV;
goto err_disable_pdev;
}
if (!(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) {
dev_err(&pdev->dev, "Missing UAR, aborting.\n");
err = -ENODEV;
goto err_disable_pdev;
}
mlx4_core: Use pci_request_regions() The old code used two calls to pci_request_region() to get the two BARs for the mlx4 device, for no particularly good reason. Clean up the code a little by converting this to a single call to pci_request_regions(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-06 03:24:48 +00:00
err = pci_request_regions(pdev, DRV_NAME);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (err) {
mlx4_core: Use pci_request_regions() The old code used two calls to pci_request_region() to get the two BARs for the mlx4 device, for no particularly good reason. Clean up the code a little by converting this to a single call to pci_request_regions(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-06 03:24:48 +00:00
dev_err(&pdev->dev, "Couldn't get PCI resources, aborting\n");
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
goto err_disable_pdev;
}
pci_set_master(pdev);
dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 02:01:13 +00:00
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (err) {
dev_warn(&pdev->dev, "Warning: couldn't set 64-bit PCI DMA mask.\n");
dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 02:01:15 +00:00
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (err) {
dev_err(&pdev->dev, "Can't set PCI DMA mask, aborting.\n");
mlx4_core: Use pci_request_regions() The old code used two calls to pci_request_region() to get the two BARs for the mlx4 device, for no particularly good reason. Clean up the code a little by converting this to a single call to pci_request_regions(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-06 03:24:48 +00:00
goto err_release_regions;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
}
}
dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 02:01:13 +00:00
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (err) {
dev_warn(&pdev->dev, "Warning: couldn't set 64-bit "
"consistent PCI DMA mask.\n");
dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 02:01:15 +00:00
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (err) {
dev_err(&pdev->dev, "Can't set consistent PCI DMA mask, "
"aborting.\n");
mlx4_core: Use pci_request_regions() The old code used two calls to pci_request_region() to get the two BARs for the mlx4 device, for no particularly good reason. Clean up the code a little by converting this to a single call to pci_request_regions(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-06 03:24:48 +00:00
goto err_release_regions;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
}
}
priv = kzalloc(sizeof *priv, GFP_KERNEL);
if (!priv) {
dev_err(&pdev->dev, "Device struct alloc failed, "
"aborting.\n");
err = -ENOMEM;
mlx4_core: Use pci_request_regions() The old code used two calls to pci_request_region() to get the two BARs for the mlx4 device, for no particularly good reason. Clean up the code a little by converting this to a single call to pci_request_regions(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-06 03:24:48 +00:00
goto err_release_regions;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
}
dev = &priv->dev;
dev->pdev = pdev;
mlx4_core: Initialize ctx_list and ctx_lock earlier We may call mlx4_dispatch_event() before mlx4_register_device() is called for a device, because for example a catastrophic error happens immediately after we enable interrupts. Therefore priv->ctx_list and priv->ctx_lock need to be initialized earlier. This bug was actually exposed by the MSI-X bug that returned IRQ numbers to drivers in reverse order, so that the first FW command interrupt looked to mlx4 like a catastrophic error. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-07 18:51:58 +00:00
INIT_LIST_HEAD(&priv->ctx_list);
spin_lock_init(&priv->ctx_lock);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
mutex_init(&priv->port_mutex);
mlx4_core: Move kernel doorbell management into core In addition to mlx4_ib, there will be ethernet and FC consumers of mlx4_core, so move the code for managing kernel doorbells into the core module to avoid having to duplicate this multiple times. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-23 18:55:45 +00:00
INIT_LIST_HEAD(&priv->pgdir_list);
mutex_init(&priv->pgdir_mutex);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
/*
* Now reset the HCA before we touch the PCI capabilities or
* attempt a firmware command, since a boot ROM may have left
* the HCA in an undefined state.
*/
err = mlx4_reset(dev);
if (err) {
mlx4_err(dev, "Failed to reset HCA, aborting.\n");
goto err_free_dev;
}
if (mlx4_cmd_init(dev)) {
mlx4_err(dev, "Failed to init command interface, aborting.\n");
goto err_free_dev;
}
err = mlx4_init_hca(dev);
if (err)
goto err_cmd;
mlx4_core: Add support for multiple completion event vectors When using MSI-X mode, create a completion event queue for each CPU. Report the number of completion EQs in a new struct mlx4_caps member, num_comp_vectors, and extend the mlx4_cq_alloc() interface with a vector parameter so that consumers can specify which completion EQ should be used to report events for the CQ being created. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-22 15:15:03 +00:00
err = mlx4_alloc_eq_table(dev);
if (err)
goto err_close;
mlx4_core: Enable MSI-X by default Recover from MSI-X errors by automatically falling back on regular interrupt, instead of asking the user to do this manually. This makes it possible to enable MSI-X by default, and will make it possible to get rid of the msi_x module option in the future. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-07 13:08:28 +00:00
mlx4_enable_msi_x(dev);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
err = mlx4_setup_hca(dev);
mlx4_core: Enable MSI-X by default Recover from MSI-X errors by automatically falling back on regular interrupt, instead of asking the user to do this manually. This makes it possible to enable MSI-X by default, and will make it possible to get rid of the msi_x module option in the future. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-07 13:08:28 +00:00
if (err == -EBUSY && (dev->flags & MLX4_FLAG_MSI_X)) {
dev->flags &= ~MLX4_FLAG_MSI_X;
pci_disable_msix(pdev);
err = mlx4_setup_hca(dev);
}
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (err)
mlx4_core: Add support for multiple completion event vectors When using MSI-X mode, create a completion event queue for each CPU. Report the number of completion EQs in a new struct mlx4_caps member, num_comp_vectors, and extend the mlx4_cq_alloc() interface with a vector parameter so that consumers can specify which completion EQ should be used to report events for the CQ being created. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-22 15:15:03 +00:00
goto err_free_eq;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
for (port = 1; port <= dev->caps.num_ports; port++) {
err = mlx4_init_port_info(dev, port);
if (err)
goto err_port;
}
mlx4_core: Ethernet MAC/VLAN management Add support for managing MAC and VLAN filters for each port. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Oren Duer <oren@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 18:44:46 +00:00
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
err = mlx4_register_device(dev);
if (err)
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
goto err_port;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
mlx4_core: Add link type autosensing When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-19 02:45:11 +00:00
mlx4_sense_init(dev);
mlx4_start_sense(dev);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
pci_set_drvdata(pdev, dev);
return 0;
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
err_port:
mlx4_core: Fix cleanup in __mlx4_init_one() error path If mlx4_init_port_info() fails, cleanup the initialized ports only. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-01-06 20:54:39 +00:00
for (--port; port >= 1; --port)
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
mlx4_cleanup_port_info(&priv->port[port]);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
mlx4_cleanup_mcg_table(dev);
mlx4_cleanup_qp_table(dev);
mlx4_cleanup_srq_table(dev);
mlx4_cleanup_cq_table(dev);
mlx4_cmd_use_polling(dev);
mlx4_cleanup_eq_table(dev);
mlx4_cleanup_mr_table(dev);
mlx4_cleanup_pd_table(dev);
mlx4_cleanup_uar_table(dev);
mlx4_core: Add support for multiple completion event vectors When using MSI-X mode, create a completion event queue for each CPU. Report the number of completion EQs in a new struct mlx4_caps member, num_comp_vectors, and extend the mlx4_cq_alloc() interface with a vector parameter so that consumers can specify which completion EQ should be used to report events for the CQ being created. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-22 15:15:03 +00:00
err_free_eq:
mlx4_free_eq_table(dev);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
err_close:
mlx4_core: Enable MSI-X by default Recover from MSI-X errors by automatically falling back on regular interrupt, instead of asking the user to do this manually. This makes it possible to enable MSI-X by default, and will make it possible to get rid of the msi_x module option in the future. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-07 13:08:28 +00:00
if (dev->flags & MLX4_FLAG_MSI_X)
pci_disable_msix(pdev);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
mlx4_close_hca(dev);
err_cmd:
mlx4_cmd_cleanup(dev);
err_free_dev:
kfree(priv);
mlx4_core: Use pci_request_regions() The old code used two calls to pci_request_region() to get the two BARs for the mlx4 device, for no particularly good reason. Clean up the code a little by converting this to a single call to pci_request_regions(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-06 03:24:48 +00:00
err_release_regions:
pci_release_regions(pdev);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
err_disable_pdev:
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
return err;
}
mlx4_core: Fix section mismatches Commit ee49bd93 ("mlx4_core: Reset device when internal error is detected") introduced some section mismatch problems when CONFIG_HOTPLUG=n, because the error recovery code tears down and reinitializes the device after everything is loaded, which ends up calling into lots of code marked __devinit and __devexit from regular .text. Fix this by getting rid of these now-incorrect section markers. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-10 22:43:54 +00:00
static int __devinit mlx4_init_one(struct pci_dev *pdev,
const struct pci_device_id *id)
{
drivers/net/mlx4: Use %pV, pr_<level>, printk_once Remove near duplication of format string constants by using the newly introduced vsprintf extention %pV to reduce text by 20k or so. $ size drivers/net/mlx4/built-in.o* text data bss dec hex filename 161367 1866 48784 212017 33c31 drivers/net/mlx4/built-in.o 142621 1866 46248 190735 2e90f drivers/net/mlx4/built-in.o.new Use printk_once as appropriate. Convert printks to pr_<level>, some bare printks now use pr_cont. Remove now unused #define PFX. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-10 07:22:46 +00:00
printk_once(KERN_INFO "%s", mlx4_version);
mlx4_core: Fix section mismatches Commit ee49bd93 ("mlx4_core: Reset device when internal error is detected") introduced some section mismatch problems when CONFIG_HOTPLUG=n, because the error recovery code tears down and reinitializes the device after everything is loaded, which ends up calling into lots of code marked __devinit and __devexit from regular .text. Fix this by getting rid of these now-incorrect section markers. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-10 22:43:54 +00:00
mlx4_core: Fix infinite loop on device initialization Commit 3d73c288 ("mlx4_core: Fix section mismatches") introduced a stupid bug in device init: when some of mlx4_init_one() was split off into __mlx4_init_one(), the call from the main mlx4_init_one() function was back to mlx4_init_one() rather than to __mlx4_init_one(), which leads to an obvious infinite loop if the function is every called. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-13 21:10:50 +00:00
return __mlx4_init_one(pdev, id);
mlx4_core: Fix section mismatches Commit ee49bd93 ("mlx4_core: Reset device when internal error is detected") introduced some section mismatch problems when CONFIG_HOTPLUG=n, because the error recovery code tears down and reinitializes the device after everything is loaded, which ends up calling into lots of code marked __devinit and __devexit from regular .text. Fix this by getting rid of these now-incorrect section markers. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-10 22:43:54 +00:00
}
static void mlx4_remove_one(struct pci_dev *pdev)
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
{
struct mlx4_dev *dev = pci_get_drvdata(pdev);
struct mlx4_priv *priv = mlx4_priv(dev);
int p;
if (dev) {
mlx4_core: Add link type autosensing When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-19 02:45:11 +00:00
mlx4_stop_sense(dev);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
mlx4_unregister_device(dev);
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
for (p = 1; p <= dev->caps.num_ports; p++) {
mlx4_cleanup_port_info(&priv->port[p]);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
mlx4_CLOSE_PORT(dev, p);
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
}
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
mlx4_cleanup_mcg_table(dev);
mlx4_cleanup_qp_table(dev);
mlx4_cleanup_srq_table(dev);
mlx4_cleanup_cq_table(dev);
mlx4_cmd_use_polling(dev);
mlx4_cleanup_eq_table(dev);
mlx4_cleanup_mr_table(dev);
mlx4_cleanup_pd_table(dev);
iounmap(priv->kar);
mlx4_uar_free(dev, &priv->driver_uar);
mlx4_cleanup_uar_table(dev);
mlx4_core: Add support for multiple completion event vectors When using MSI-X mode, create a completion event queue for each CPU. Report the number of completion EQs in a new struct mlx4_caps member, num_comp_vectors, and extend the mlx4_cq_alloc() interface with a vector parameter so that consumers can specify which completion EQ should be used to report events for the CQ being created. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-22 15:15:03 +00:00
mlx4_free_eq_table(dev);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
mlx4_close_hca(dev);
mlx4_cmd_cleanup(dev);
if (dev->flags & MLX4_FLAG_MSI_X)
pci_disable_msix(pdev);
kfree(priv);
mlx4_core: Use pci_request_regions() The old code used two calls to pci_request_region() to get the two BARs for the mlx4 device, for no particularly good reason. Clean up the code a little by converting this to a single call to pci_request_regions(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-06 03:24:48 +00:00
pci_release_regions(pdev);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
}
}
mlx4_core: Reset device when internal error is detected Reset the device when an internal error is detected. Also, detect errors by polling the error buffer rather than using interrupts. This is more robust and doesn't depend on MSI-X. Remove the old interrupt handler entirely, since we don't want to support two mechanisms for detecting internal errors. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-12 14:50:45 +00:00
int mlx4_restart_one(struct pci_dev *pdev)
{
mlx4_remove_one(pdev);
mlx4_core: Fix section mismatches Commit ee49bd93 ("mlx4_core: Reset device when internal error is detected") introduced some section mismatch problems when CONFIG_HOTPLUG=n, because the error recovery code tears down and reinitializes the device after everything is loaded, which ends up calling into lots of code marked __devinit and __devexit from regular .text. Fix this by getting rid of these now-incorrect section markers. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-10 22:43:54 +00:00
return __mlx4_init_one(pdev, NULL);
mlx4_core: Reset device when internal error is detected Reset the device when an internal error is detected. Also, detect errors by polling the error buffer rather than using interrupts. This is more robust and doesn't depend on MSI-X. Remove the old interrupt handler entirely, since we don't want to support two mechanisms for detecting internal errors. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-12 14:50:45 +00:00
}
drivers/net/: use DEFINE_PCI_DEVICE_TABLE() Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into correct section in every case. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07 11:58:11 +00:00
static DEFINE_PCI_DEVICE_TABLE(mlx4_pci_table) = {
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
{ PCI_VDEVICE(MELLANOX, 0x6340) }, /* MT25408 "Hermon" SDR */
{ PCI_VDEVICE(MELLANOX, 0x634a) }, /* MT25408 "Hermon" DDR */
{ PCI_VDEVICE(MELLANOX, 0x6354) }, /* MT25408 "Hermon" QDR */
mlx4_core: Add new Mellanox device IDs Add new IDs for PCIe gen2 devices. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-02 14:36:18 +00:00
{ PCI_VDEVICE(MELLANOX, 0x6732) }, /* MT25408 "Hermon" DDR PCIe gen2 */
{ PCI_VDEVICE(MELLANOX, 0x673c) }, /* MT25408 "Hermon" QDR PCIe gen2 */
mlx4_core: Add Ethernet PCI device IDs Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:48:03 +00:00
{ PCI_VDEVICE(MELLANOX, 0x6368) }, /* MT25408 "Hermon" EN 10GigE */
{ PCI_VDEVICE(MELLANOX, 0x6750) }, /* MT25408 "Hermon" EN 10GigE PCIe gen2 */
mlx4_core: Add device IDs for MT25458 10GigE devices Add device IDs for Mellanox MT25458 ConnectX+10GBaseT 10GigE adapters. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-02-27 18:29:13 +00:00
{ PCI_VDEVICE(MELLANOX, 0x6372) }, /* MT25458 ConnectX EN 10GBASE-T 10GigE */
{ PCI_VDEVICE(MELLANOX, 0x675a) }, /* MT25458 ConnectX EN 10GBASE-T+Gen2 10GigE */
mlx4_core: Add new ConnectX EN PCI ID 0x6764 Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-07-06 23:10:40 +00:00
{ PCI_VDEVICE(MELLANOX, 0x6764) }, /* MT26468 ConnectX EN 10GigE PCIe gen2*/
mlx4_core: Add a new supported 40 GigE device ID Add MT26438 (ConnectX EN 40GigE PCIe 2.0 5GT/s) to the list of supported devices. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-10-14 17:52:40 +00:00
{ PCI_VDEVICE(MELLANOX, 0x6746) }, /* MT26438 ConnectX EN 40GigE PCIe gen2 5GT/s */
mlx4_core: Add 40GigE device ID Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-10-07 22:46:49 +00:00
{ PCI_VDEVICE(MELLANOX, 0x676e) }, /* MT26478 ConnectX2 40GigE PCIe gen2 */
mlx4_core: Add ConnectX-3 device IDs ...as already added to pci.ids. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2010-12-07 14:23:45 +00:00
{ PCI_VDEVICE(MELLANOX, 0x1002) }, /* MT25400 Family [ConnectX-2 Virtual Function] */
{ PCI_VDEVICE(MELLANOX, 0x1003) }, /* MT27500 Family [ConnectX-3] */
{ PCI_VDEVICE(MELLANOX, 0x1004) }, /* MT27500 Family [ConnectX-3 Virtual Function] */
{ PCI_VDEVICE(MELLANOX, 0x1005) }, /* MT27510 Family */
{ PCI_VDEVICE(MELLANOX, 0x1006) }, /* MT27511 Family */
{ PCI_VDEVICE(MELLANOX, 0x1007) }, /* MT27520 Family */
{ PCI_VDEVICE(MELLANOX, 0x1008) }, /* MT27521 Family */
{ PCI_VDEVICE(MELLANOX, 0x1009) }, /* MT27530 Family */
{ PCI_VDEVICE(MELLANOX, 0x100a) }, /* MT27531 Family */
{ PCI_VDEVICE(MELLANOX, 0x100b) }, /* MT27540 Family */
{ PCI_VDEVICE(MELLANOX, 0x100c) }, /* MT27541 Family */
{ PCI_VDEVICE(MELLANOX, 0x100d) }, /* MT27550 Family */
{ PCI_VDEVICE(MELLANOX, 0x100e) }, /* MT27551 Family */
{ PCI_VDEVICE(MELLANOX, 0x100f) }, /* MT27560 Family */
{ PCI_VDEVICE(MELLANOX, 0x1010) }, /* MT27561 Family */
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
{ 0, }
};
MODULE_DEVICE_TABLE(pci, mlx4_pci_table);
static struct pci_driver mlx4_driver = {
.name = DRV_NAME,
.id_table = mlx4_pci_table,
.probe = mlx4_init_one,
.remove = __devexit_p(mlx4_remove_one)
};
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
static int __init mlx4_verify_params(void)
{
if ((log_num_mac < 0) || (log_num_mac > 7)) {
drivers/net/mlx4: Use %pV, pr_<level>, printk_once Remove near duplication of format string constants by using the newly introduced vsprintf extention %pV to reduce text by 20k or so. $ size drivers/net/mlx4/built-in.o* text data bss dec hex filename 161367 1866 48784 212017 33c31 drivers/net/mlx4/built-in.o 142621 1866 46248 190735 2e90f drivers/net/mlx4/built-in.o.new Use printk_once as appropriate. Convert printks to pr_<level>, some bare printks now use pr_cont. Remove now unused #define PFX. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-10 07:22:46 +00:00
pr_warning("mlx4_core: bad num_mac: %d\n", log_num_mac);
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
return -1;
}
if ((log_num_vlan < 0) || (log_num_vlan > 7)) {
drivers/net/mlx4: Use %pV, pr_<level>, printk_once Remove near duplication of format string constants by using the newly introduced vsprintf extention %pV to reduce text by 20k or so. $ size drivers/net/mlx4/built-in.o* text data bss dec hex filename 161367 1866 48784 212017 33c31 drivers/net/mlx4/built-in.o 142621 1866 46248 190735 2e90f drivers/net/mlx4/built-in.o.new Use printk_once as appropriate. Convert printks to pr_<level>, some bare printks now use pr_cont. Remove now unused #define PFX. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-10 07:22:46 +00:00
pr_warning("mlx4_core: bad num_vlan: %d\n", log_num_vlan);
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
return -1;
}
mlx4_core: Allow log_mtts_per_seg up to 7 As there are now machines with a lot more physical memory, we need to be able to register more memory. This patch lifts the upper limit of log_mtts_per_seg from 5 to 7, increasing the amount of memory that can be registered. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-20 06:42:38 +00:00
if ((log_mtts_per_seg < 1) || (log_mtts_per_seg > 7)) {
drivers/net/mlx4: Use %pV, pr_<level>, printk_once Remove near duplication of format string constants by using the newly introduced vsprintf extention %pV to reduce text by 20k or so. $ size drivers/net/mlx4/built-in.o* text data bss dec hex filename 161367 1866 48784 212017 33c31 drivers/net/mlx4/built-in.o 142621 1866 46248 190735 2e90f drivers/net/mlx4/built-in.o.new Use printk_once as appropriate. Convert printks to pr_<level>, some bare printks now use pr_cont. Remove now unused #define PFX. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-10 07:22:46 +00:00
pr_warning("mlx4_core: bad log_mtts_per_seg: %d\n", log_mtts_per_seg);
mlx4_core: Add module parameter for number of MTTs per segment The current MTT allocator uses kmalloc() to allocate a buffer for its buddy allocator, and thus is limited in the amount of MTT segments that it can control. As a result, the size of memory that can be registered is limited too. This patch uses a module parameter to control the number of MTT entries that each segment represents, allowing more memory to be registered with the same number of segments. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-05-27 21:38:34 +00:00
return -1;
}
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
return 0;
}
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
static int __init mlx4_init(void)
{
int ret;
mlx4_core: Multiple port type support Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22 22:38:42 +00:00
if (mlx4_verify_params())
return -EINVAL;
mlx4_core: Add link type autosensing When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-19 02:45:11 +00:00
mlx4_catas_init();
mlx4_wq = create_singlethread_workqueue("mlx4");
if (!mlx4_wq)
return -ENOMEM;
mlx4_core: Reset device when internal error is detected Reset the device when an internal error is detected. Also, detect errors by polling the error buffer rather than using interrupts. This is more robust and doesn't depend on MSI-X. Remove the old interrupt handler entirely, since we don't want to support two mechanisms for detecting internal errors. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-12 14:50:45 +00:00
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
ret = pci_register_driver(&mlx4_driver);
return ret < 0 ? ret : 0;
}
static void __exit mlx4_cleanup(void)
{
pci_unregister_driver(&mlx4_driver);
mlx4_core: Add link type autosensing When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-19 02:45:11 +00:00
destroy_workqueue(mlx4_wq);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
}
module_init(mlx4_init);
module_exit(mlx4_cleanup);