dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/drivers/ide/Makefile

116 lines
3.7 KiB
Makefile
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
ide: make remaining built-in only IDE host drivers modular (take 2) * Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 19:13:07 +00:00
# link order is important here
ide: remove stale comments from drivers/ide/Makefile Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 20:53:36 +00:00
#
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
EXTRA_CFLAGS += -Idrivers/ide
ide: move ioctls handling to ide-ioctls.c * Move ioctls handling to ide-ioctls.c (except HDIO_DRIVE_TASKFILE for now). * Make ide_{cmd,task}() static. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10 20:39:33 +00:00
ide-core-y += ide.o ide-ioctls.o ide-io.o ide-iops.o ide-lib.o ide-probe.o \
ide: Implement disk shock protection support (v4) On user request (through sysfs), the IDLE IMMEDIATE command with UNLOAD FEATURE as specified in ATA-7 is issued to the device and processing of the request queue is stopped thereafter until the specified timeout expires or user space asks to resume normal operation. This is supposed to prevent the heads of a hard drive from accidentally crashing onto the platter when a heavy shock is anticipated (like a falling laptop expected to hit the floor). Port resets are deferred whenever a device on that port is in the parked state. v3: Elias Oltmanns <eo@nebensachen.de> wrote: [...] > >> 1. Make sure that no negative value is being passed to > >> jiffies_to_msecs() in ide_park_show(). > >> 2. Drop the superfluous variable hwif in ide_special_rq(). > >> 3. Skip initialisation of task and tf in ide_special_rq() if we are not > >> handling a (un)park request. > > > > Well, #3 should have been done differently because we donn't want to > > check for REQ_(UN)?PARK_HEADS more often than is necessary. > > While preparing the backport to 2.6.27, it has just occurred to me that > we need to clear the IDE_DFLAG_PARKED flag in ide_disk_pre_reset() > because this flag must not be set after *any* sort of access to the > device. v4: Fix a memory leak due to a missing blk_put_request() in issue_park_cmd(). Additionally, we should plug the queue when enqueueing the unpark request because there is no guarantee that the park timeout has not expired by then. Even though the chance for that to happen is very slim, the request might end up hanging in the queue until the next I/O operation is queued up. While at it, clean up the code a little: - make issue_park_cmd() a function of type void since nobody cares for the return value anyway; - use blk_start_queueing() instead of __blk_run_queue() since we don't have to worry about recursion; - remove a superfluous pointer deference in task_no_data_intr(). Signed-off-by: Elias Oltmanns <eo@nebensachen.de> Cc: Jeff Garzik <jeff@garzik.org>, Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13 19:39:50 +00:00
ide-taskfile.o ide-park.o ide-pio-blacklist.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ide: make remaining built-in only IDE host drivers modular (take 2) * Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 19:13:07 +00:00
# core IDE code
ide: convert ide-timing.h to ide-timings.c library (take 2) * Don't include ide-timing.h in cs5535 and sis5513 host drivers (they don't need it currently). * Convert ide-timing.h to ide-timings.c library and add CONFIG_IDE_TIMINGS config option to be selected by host drivers using the library. While at it: - fix ide_timing_find_mode() placement v2: * Add missing EXPORT_SYMBOLs. (Stephen Rothwell <sfr@canb.auug.org.au>) There should be no functional changes caused by this patch. Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16 18:33:37 +00:00
ide-core-$(CONFIG_IDE_TIMINGS) += ide-timings.o
ide: add ide_transfer_pc() helper * Add ide-atapi.c file for generic ATAPI support together with CONFIG_IDE_ATAPI config option. * Add generic ide_transfer_pc() helper to ide-atapi.c and then convert ide-{floppy,tape,scsi} device drivers to use it. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15 19:21:58 +00:00
ide-core-$(CONFIG_IDE_ATAPI) += ide-atapi.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o
ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o
ide: move SFF DMA code to ide-dma-sff.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13 19:39:47 +00:00
ide-core-$(CONFIG_BLK_DEV_IDEDMA_SFF) += ide-dma-sff.o
ide: make /proc/ide/ optional All important information/features should be already available through sysfs and ioctl interfaces. Add CONFIG_IDE_PROC_FS (CONFIG_SCSI_PROC_FS rip-off) config option, disabling it makes IDE driver ~5 kB smaller (on x86-32). While at it add CONFIG_PROC_FS=n versions of proc_ide_{create,destroy}() and remove no longer needed #ifdefs. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-09 22:01:09 +00:00
ide-core-$(CONFIG_IDE_PROC_FS) += ide-proc.o
ACPI support for IDE devices This patch implements ACPI integration for generic IDE devices. The ACPI spec mandates that some methods are called during suspend and resume. And consequently there most modern Laptops cannot resume properly without it. According to the spec, we should call '_GTM' (Get Timing) upon suspend to store the current IDE adapter settings. Upon resume we should call '_STM' (Set Timing) to initialize the adapter with the stored settings; afterwards '_GTF' (Get Taskfile) should be called which returns a buffer with some IDE initialisation commands. Those commands should be passed to the drive. There are two module params which control the behaviour of this patch: 'ide=noacpi' Do not call any ACPI methods (Disables any ACPI method calls) 'ide=acpigtf' Enable execution of _GTF methods upon resume. Has no effect if 'ide=noacpi' is set. 'ide=acpionboot' Enable execution of ACPI methods during boot. This might be required on some machines if 'ide=acpigtf' is selected as some machines modify the _GTF information depending on the drive identification passed down with _STM. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 17:19:37 +00:00
ide-core-$(CONFIG_BLK_DEV_IDEACPI) += ide-acpi.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ide: remove CONFIG_BLK_DEV_IDE config option (take 2) Because hd.c was moved to drivers/block/ this config option is superfluous now and may be removed. v2: Fix drivers/ide/Makefile (noticed by Adrian Bunk). Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13 19:39:33 +00:00
obj-$(CONFIG_IDE) += ide-core.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ide: remove useless subdirs from drivers/ide/ Suggested-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-21 18:57:23 +00:00
obj-$(CONFIG_IDE_ARM) += ide_arm.o
obj-$(CONFIG_BLK_DEV_ALI14XX) += ali14xx.o
obj-$(CONFIG_BLK_DEV_UMC8672) += umc8672.o
obj-$(CONFIG_BLK_DEV_DTC2278) += dtc2278.o
obj-$(CONFIG_BLK_DEV_HT6560B) += ht6560b.o
obj-$(CONFIG_BLK_DEV_QD65XX) += qd65xx.o
obj-$(CONFIG_BLK_DEV_4DRIVES) += ide-4drives.o
obj-$(CONFIG_BLK_DEV_GAYLE) += gayle.o
obj-$(CONFIG_BLK_DEV_FALCON_IDE) += falconide.o
obj-$(CONFIG_BLK_DEV_MAC_IDE) += macide.o
obj-$(CONFIG_BLK_DEV_Q40IDE) += q40ide.o
obj-$(CONFIG_BLK_DEV_BUDDHA) += buddha.o
obj-$(CONFIG_BLK_DEV_AEC62XX) += aec62xx.o
obj-$(CONFIG_BLK_DEV_ALI15X3) += alim15x3.o
obj-$(CONFIG_BLK_DEV_AMD74XX) += amd74xx.o
obj-$(CONFIG_BLK_DEV_ATIIXP) += atiixp.o
obj-$(CONFIG_BLK_DEV_CELLEB) += scc_pata.o
obj-$(CONFIG_BLK_DEV_CMD64X) += cmd64x.o
obj-$(CONFIG_BLK_DEV_CS5520) += cs5520.o
obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o
obj-$(CONFIG_BLK_DEV_CS5535) += cs5535.o
obj-$(CONFIG_BLK_DEV_SC1200) += sc1200.o
obj-$(CONFIG_BLK_DEV_CY82C693) += cy82c693.o
obj-$(CONFIG_BLK_DEV_DELKIN) += delkin_cb.o
obj-$(CONFIG_BLK_DEV_HPT366) += hpt366.o
obj-$(CONFIG_BLK_DEV_IT8213) += it8213.o
obj-$(CONFIG_BLK_DEV_IT821X) += it821x.o
obj-$(CONFIG_BLK_DEV_JMICRON) += jmicron.o
obj-$(CONFIG_BLK_DEV_NS87415) += ns87415.o
obj-$(CONFIG_BLK_DEV_OPTI621) += opti621.o
obj-$(CONFIG_BLK_DEV_PDC202XX_OLD) += pdc202xx_old.o
obj-$(CONFIG_BLK_DEV_PDC202XX_NEW) += pdc202xx_new.o
obj-$(CONFIG_BLK_DEV_PIIX) += piix.o
obj-$(CONFIG_BLK_DEV_RZ1000) += rz1000.o
obj-$(CONFIG_BLK_DEV_SVWKS) += serverworks.o
obj-$(CONFIG_BLK_DEV_SGIIOC4) += sgiioc4.o
obj-$(CONFIG_BLK_DEV_SIIMAGE) += siimage.o
obj-$(CONFIG_BLK_DEV_SIS5513) += sis5513.o
obj-$(CONFIG_BLK_DEV_SL82C105) += sl82c105.o
obj-$(CONFIG_BLK_DEV_SLC90E66) += slc90e66.o
obj-$(CONFIG_BLK_DEV_TC86C001) += tc86c001.o
obj-$(CONFIG_BLK_DEV_TRIFLEX) += triflex.o
obj-$(CONFIG_BLK_DEV_TRM290) += trm290.o
obj-$(CONFIG_BLK_DEV_VIA82CXXX) += via82cxxx.o
# Must appear at the end of the block
obj-$(CONFIG_BLK_DEV_GENERIC) += ide-pci-generic.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ide: make remaining built-in only IDE host drivers modular (take 2) * Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 19:13:07 +00:00
obj-$(CONFIG_IDEPCI_PCIBUS_ORDER) += ide-scan-pci.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ide: remove useless subdirs from drivers/ide/ Suggested-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-21 18:57:23 +00:00
obj-$(CONFIG_BLK_DEV_CMD640) += cmd640.o
obj-$(CONFIG_BLK_DEV_IDE_PMAC) += pmac.o
obj-$(CONFIG_IDE_H8300) += ide-h8300.o
ide: make remaining built-in only IDE host drivers modular (take 2) * Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 19:13:07 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
ide: fix ide_find_port() * Instead of checking for '->io_ports[IDE_DATA_OFFSET] == 0' check for '->chipset == ide_unknown' when looking for an empty ide_hwifs[] slot. * Do ide-pnp initialization after ide-generic when IDE is built-in (ide-pnp is the only user of ide_find_port() which needs such fixup). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-17 22:46:21 +00:00
obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ide: add generic ATA/ATAPI disk driver * Add struct ide_disk_ops containing protocol specific methods. * Add 'struct ide_disk_ops *' to ide_drive_t. * Convert ide-{disk,floppy} drivers to use struct ide_disk_ops. * Merge ide-{disk,floppy} drivers into generic ide-gd driver. While at it: - ide_disk_init_capacity() -> ide_disk_get_capacity() Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 16:09:14 +00:00
ide-gd_mod-y += ide-gd.o
ide-cd: move code handling cdrom.c IOCTLs to ide-cd_ioctl.c There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01 22:09:25 +00:00
ide-cd_mod-y += ide-cd.o ide-cd_ioctl.o ide-cd_verbose.o
ide-cd: move VERBOSE_IDE_CD_ERRORS code to ide-cd_verbose.c * Rename ide-cd kernel module to ide-cd_mod in preparation to moving code out from ide-cd.[c,h]. Add MODULE_ALIAS("ide-cd") to preserve compatibility. * Move VERBOSE_IDE_CD_ERRORS code from ide-cd.[c,h] to ide-cd_verbose.c. ide-cd_verbose.c is IDE subsystem independent and may be easily converted into generic library usable by other drivers (i.e. libata) if needed. * Add CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS config option to drivers/ide/Kconfig replacing VERBOSE_IDE_CD_ERRORS define. Make this config option enabled by default and visible only if CONFIG_EMBEDDED is defined. before the patch: text data bss dec hex filename 22841 360 1056 24257 5ec1 drivers/ide/ide-cd.o after the patch w/ CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y: text data bss dec hex filename 22857 360 1056 24273 5ed1 drivers/ide/ide-cd_mod.o after the patch w/ CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=n: text data bss dec hex filename 15091 360 1056 16507 407b drivers/ide/ide-cd_mod.o Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01 22:09:23 +00:00
ide: add generic ATA/ATAPI disk driver * Add struct ide_disk_ops containing protocol specific methods. * Add 'struct ide_disk_ops *' to ide_drive_t. * Convert ide-{disk,floppy} drivers to use struct ide_disk_ops. * Merge ide-{disk,floppy} drivers into generic ide-gd driver. While at it: - ide_disk_init_capacity() -> ide_disk_get_capacity() Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 16:09:14 +00:00
ifeq ($(CONFIG_IDE_GD_ATA), y)
ide-gd_mod-y += ide-disk.o ide-disk_ioctl.o
ide-floppy: move /proc handling to ide-floppy_proc.c (take 2) While at it: - idefloppy_capacity() -> ide_floppy_capacity() - idefloppy_proc[] -> ide_floppy_proc[] - idefloppy_settings[] -> ide_floppy_settings[] v2: Build fix for CONFIG_IDE_PROC_FS=n from Elias Oltmanns. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13 19:39:44 +00:00
ifeq ($(CONFIG_IDE_PROC_FS), y)
ide: add generic ATA/ATAPI disk driver * Add struct ide_disk_ops containing protocol specific methods. * Add 'struct ide_disk_ops *' to ide_drive_t. * Convert ide-{disk,floppy} drivers to use struct ide_disk_ops. * Merge ide-{disk,floppy} drivers into generic ide-gd driver. While at it: - ide_disk_init_capacity() -> ide_disk_get_capacity() Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 16:09:14 +00:00
ide-gd_mod-y += ide-disk_proc.o
endif
endif
ifeq ($(CONFIG_IDE_GD_ATAPI), y)
ide-gd_mod-y += ide-floppy.o ide-floppy_ioctl.o
ifeq ($(CONFIG_IDE_PROC_FS), y)
ide-gd_mod-y += ide-floppy_proc.o
endif
ide-floppy: move /proc handling to ide-floppy_proc.c (take 2) While at it: - idefloppy_capacity() -> ide_floppy_capacity() - idefloppy_proc[] -> ide_floppy_proc[] - idefloppy_settings[] -> ide_floppy_settings[] v2: Build fix for CONFIG_IDE_PROC_FS=n from Elias Oltmanns. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13 19:39:44 +00:00
endif
ide: add generic ATA/ATAPI disk driver * Add struct ide_disk_ops containing protocol specific methods. * Add 'struct ide_disk_ops *' to ide_drive_t. * Convert ide-{disk,floppy} drivers to use struct ide_disk_ops. * Merge ide-{disk,floppy} drivers into generic ide-gd driver. While at it: - ide_disk_init_capacity() -> ide_disk_get_capacity() Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 16:09:14 +00:00
obj-$(CONFIG_IDE_GD) += ide-gd_mod.o
ide-cd: move VERBOSE_IDE_CD_ERRORS code to ide-cd_verbose.c * Rename ide-cd kernel module to ide-cd_mod in preparation to moving code out from ide-cd.[c,h]. Add MODULE_ALIAS("ide-cd") to preserve compatibility. * Move VERBOSE_IDE_CD_ERRORS code from ide-cd.[c,h] to ide-cd_verbose.c. ide-cd_verbose.c is IDE subsystem independent and may be easily converted into generic library usable by other drivers (i.e. libata) if needed. * Add CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS config option to drivers/ide/Kconfig replacing VERBOSE_IDE_CD_ERRORS define. Make this config option enabled by default and visible only if CONFIG_EMBEDDED is defined. before the patch: text data bss dec hex filename 22841 360 1056 24257 5ec1 drivers/ide/ide-cd.o after the patch w/ CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y: text data bss dec hex filename 22857 360 1056 24273 5ed1 drivers/ide/ide-cd_mod.o after the patch w/ CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=n: text data bss dec hex filename 15091 360 1056 16507 407b drivers/ide/ide-cd_mod.o Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01 22:09:23 +00:00
obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd_mod.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o
ide: remove useless subdirs from drivers/ide/ Suggested-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-21 18:57:23 +00:00
obj-$(CONFIG_BLK_DEV_IDECS) += ide-cs.o
ide: make remaining built-in only IDE host drivers modular (take 2) * Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 19:13:07 +00:00
ide: remove useless subdirs from drivers/ide/ Suggested-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-21 18:57:23 +00:00
obj-$(CONFIG_BLK_DEV_PLATFORM) += ide_platform.o
obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o
obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o
obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710) += palm_bk3710.o
ide: make remaining built-in only IDE host drivers modular (take 2) * Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 19:13:07 +00:00
ide: remove useless subdirs from drivers/ide/ Suggested-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-21 18:57:23 +00:00
obj-$(CONFIG_BLK_DEV_IDE_AU1XXX) += au1xxx-ide.o
ide: Add tx4939ide driver (v6) This is the driver for the Toshiba TX4939 SoC ATA controller. This controller has standard ATA taskfile registers and DMA command/status registers, but the register layout is swapped on big endian. There are some other endian issue and some special registers which requires many custom dma_ops/tp_ops routines and build_dmatable. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: ralf@linux-mips.org Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 21:22:07 +00:00
ide: Add tx4938ide driver (v2) This is the driver for the Toshiba TX4938 SoC EBUS controller ATA mode. It has custom set_pio_mode and some hacks for big endian. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: ralf@linux-mips.org Cc: sshtylyov@ru.mvista.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 21:22:08 +00:00
obj-$(CONFIG_BLK_DEV_IDE_TX4938) += tx4938ide.o
ide: Add tx4939ide driver (v6) This is the driver for the Toshiba TX4939 SoC ATA controller. This controller has standard ATA taskfile registers and DMA command/status registers, but the register layout is swapped on big endian. There are some other endian issue and some special registers which requires many custom dma_ops/tp_ops routines and build_dmatable. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: ralf@linux-mips.org Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 21:22:07 +00:00
obj-$(CONFIG_BLK_DEV_IDE_TX4939) += tx4939ide.o