dect
/
linux-2.6
Archived
13
0
Fork 0
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/drivers/ide/ide-taskfile.c

694 lines
17 KiB
C
Raw Normal View History

/*
* Copyright (C) 2000-2002 Michael Cornwell <cornwell@acm.org>
* Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2001-2002 Klaus Smolin
* IBM Storage Technology Division
* Copyright (C) 2003-2004, 2007 Bartlomiej Zolnierkiewicz
*
* The big the bad and the ugly.
*/
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/scatterlist.h>
#include <asm/uaccess.h>
#include <asm/io.h>
void ide_tf_dump(const char *s, struct ide_taskfile *tf)
{
#ifdef DEBUG
printk("%s: tf: feat 0x%02x nsect 0x%02x lbal 0x%02x "
"lbam 0x%02x lbah 0x%02x dev 0x%02x cmd 0x%02x\n",
s, tf->feature, tf->nsect, tf->lbal,
tf->lbam, tf->lbah, tf->device, tf->command);
printk("%s: hob: nsect 0x%02x lbal 0x%02x "
"lbam 0x%02x lbah 0x%02x\n",
s, tf->hob_nsect, tf->hob_lbal,
tf->hob_lbam, tf->hob_lbah);
#endif
}
int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf)
{
struct ide_cmd cmd;
memset(&cmd, 0, sizeof(cmd));
cmd.tf.nsect = 0x01;
if (drive->media == ide_disk)
cmd.tf.command = ATA_CMD_ID_ATA;
else
cmd.tf.command = ATA_CMD_ID_ATAPI;
cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
cmd.data_phase = TASKFILE_IN;
return ide_raw_taskfile(drive, &cmd, buf, 1);
}
static ide_startstop_t task_no_data_intr(ide_drive_t *);
static ide_startstop_t pre_task_out_intr(ide_drive_t *, struct ide_cmd *);
static ide_startstop_t task_in_intr(ide_drive_t *);
ide_startstop_t do_rw_taskfile(ide_drive_t *drive, struct ide_cmd *orig_cmd)
{
ide_hwif_t *hwif = drive->hwif;
struct ide_cmd *cmd = &hwif->cmd;
struct ide_taskfile *tf = &cmd->tf;
ide_handler_t *handler = NULL;
const struct ide_tp_ops *tp_ops = hwif->tp_ops;
const struct ide_dma_ops *dma_ops = hwif->dma_ops;
if (orig_cmd->data_phase == TASKFILE_MULTI_IN ||
orig_cmd->data_phase == TASKFILE_MULTI_OUT) {
if (!drive->mult_count) {
printk(KERN_ERR "%s: multimode not set!\n",
drive->name);
return ide_stopped;
}
}
if (orig_cmd->ftf_flags & IDE_FTFLAG_FLAGGED)
orig_cmd->ftf_flags |= IDE_FTFLAG_SET_IN_FLAGS;
memcpy(cmd, orig_cmd, sizeof(*cmd));
if ((cmd->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) {
ide_tf_dump(drive->name, tf);
tp_ops->set_irq(hwif, 1);
SELECT_MASK(drive, 0);
tp_ops->tf_load(drive, cmd);
}
switch (cmd->data_phase) {
case TASKFILE_MULTI_OUT:
case TASKFILE_OUT:
tp_ops->exec_command(hwif, tf->command);
ndelay(400); /* FIXME */
return pre_task_out_intr(drive, cmd);
case TASKFILE_MULTI_IN:
case TASKFILE_IN:
handler = task_in_intr;
/* fall-through */
case TASKFILE_NO_DATA:
if (handler == NULL)
handler = task_no_data_intr;
ide_execute_command(drive, tf->command, handler,
WAIT_WORSTCASE, NULL);
return ide_started;
default:
if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0 ||
ide_build_sglist(drive, hwif->rq) == 0 ||
dma_ops->dma_setup(drive))
return ide_stopped;
dma_ops->dma_exec_cmd(drive, tf->command);
dma_ops->dma_start(drive);
return ide_started;
}
}
EXPORT_SYMBOL_GPL(do_rw_taskfile);
/*
* Handler for commands without a data phase
*/
static ide_startstop_t task_no_data_intr(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
struct ide_cmd *cmd = &hwif->cmd;
struct ide_taskfile *tf = &cmd->tf;
int custom = (cmd->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) ? 1 : 0;
int retries = (custom && tf->command == ATA_CMD_INIT_DEV_PARAMS) ? 5 : 1;
u8 stat;
local_irq_enable_in_hardirq();
while (1) {
stat = hwif->tp_ops->read_status(hwif);
if ((stat & ATA_BUSY) == 0 || retries-- == 0)
break;
udelay(10);
};
if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) {
if (custom && tf->command == ATA_CMD_SET_MULTI) {
drive->mult_req = drive->mult_count = 0;
drive->special.b.recalibrate = 1;
(void)ide_dump_status(drive, __func__, stat);
return ide_stopped;
} else if (custom && tf->command == ATA_CMD_INIT_DEV_PARAMS) {
if ((stat & (ATA_ERR | ATA_DRQ)) == 0) {
ide_set_handler(drive, &task_no_data_intr,
WAIT_WORSTCASE, NULL);
return ide_started;
}
}
return ide_error(drive, "task_no_data_intr", stat);
}
if (custom && tf->command == ATA_CMD_IDLEIMMEDIATE) {
hwif->tp_ops->tf_read(drive, cmd);
ide: Implement disk shock protection support (v4) On user request (through sysfs), the IDLE IMMEDIATE command with UNLOAD FEATURE as specified in ATA-7 is issued to the device and processing of the request queue is stopped thereafter until the specified timeout expires or user space asks to resume normal operation. This is supposed to prevent the heads of a hard drive from accidentally crashing onto the platter when a heavy shock is anticipated (like a falling laptop expected to hit the floor). Port resets are deferred whenever a device on that port is in the parked state. v3: Elias Oltmanns <eo@nebensachen.de> wrote: [...] > >> 1. Make sure that no negative value is being passed to > >> jiffies_to_msecs() in ide_park_show(). > >> 2. Drop the superfluous variable hwif in ide_special_rq(). > >> 3. Skip initialisation of task and tf in ide_special_rq() if we are not > >> handling a (un)park request. > > > > Well, #3 should have been done differently because we donn't want to > > check for REQ_(UN)?PARK_HEADS more often than is necessary. > > While preparing the backport to 2.6.27, it has just occurred to me that > we need to clear the IDE_DFLAG_PARKED flag in ide_disk_pre_reset() > because this flag must not be set after *any* sort of access to the > device. v4: Fix a memory leak due to a missing blk_put_request() in issue_park_cmd(). Additionally, we should plug the queue when enqueueing the unpark request because there is no guarantee that the park timeout has not expired by then. Even though the chance for that to happen is very slim, the request might end up hanging in the queue until the next I/O operation is queued up. While at it, clean up the code a little: - make issue_park_cmd() a function of type void since nobody cares for the return value anyway; - use blk_start_queueing() instead of __blk_run_queue() since we don't have to worry about recursion; - remove a superfluous pointer deference in task_no_data_intr(). Signed-off-by: Elias Oltmanns <eo@nebensachen.de> Cc: Jeff Garzik <jeff@garzik.org>, Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13 19:39:50 +00:00
if (tf->lbal != 0xc4) {
printk(KERN_ERR "%s: head unload failed!\n",
drive->name);
ide_tf_dump(drive->name, tf);
} else
drive->dev_flags |= IDE_DFLAG_PARKED;
} else if (custom && tf->command == ATA_CMD_SET_MULTI)
drive->mult_count = drive->mult_req;
if (custom == 0 || tf->command == ATA_CMD_IDLEIMMEDIATE) {
struct request *rq = hwif->rq;
u8 err = ide_read_error(drive);
if (blk_pm_request(rq))
ide_complete_pm_rq(drive, rq);
else {
if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
ide_complete_cmd(drive, cmd, stat, err);
ide_complete_rq(drive, err);
}
}
return ide_stopped;
}
static u8 wait_drive_not_busy(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
int retries;
u8 stat;
/*
* Last sector was transfered, wait until device is ready. This can
* take up to 6 ms on some ATAPI devices, so we will wait max 10 ms.
*/
for (retries = 0; retries < 1000; retries++) {
stat = hwif->tp_ops->read_status(hwif);
if (stat & ATA_BUSY)
udelay(10);
else
break;
}
if (stat & ATA_BUSY)
printk(KERN_ERR "%s: drive still BUSY!\n", drive->name);
return stat;
}
static void ide_pio_sector(ide_drive_t *drive, struct ide_cmd *cmd,
unsigned int write)
{
ide_hwif_t *hwif = drive->hwif;
struct scatterlist *sg = hwif->sg_table;
struct scatterlist *cursg = cmd->cursg;
struct page *page;
#ifdef CONFIG_HIGHMEM
unsigned long flags;
#endif
unsigned int offset;
u8 *buf;
cursg = cmd->cursg;
if (!cursg) {
cursg = sg;
cmd->cursg = sg;
}
page = sg_page(cursg);
offset = cursg->offset + cmd->cursg_ofs * SECTOR_SIZE;
/* get the current page and offset */
page = nth_page(page, (offset >> PAGE_SHIFT));
offset %= PAGE_SIZE;
#ifdef CONFIG_HIGHMEM
local_irq_save(flags);
#endif
buf = kmap_atomic(page, KM_BIO_SRC_IRQ) + offset;
cmd->nleft--;
cmd->cursg_ofs++;
if ((cmd->cursg_ofs * SECTOR_SIZE) == cursg->length) {
cmd->cursg = sg_next(cmd->cursg);
cmd->cursg_ofs = 0;
}
/* do the actual data transfer */
if (write)
hwif->tp_ops->output_data(drive, cmd, buf, SECTOR_SIZE);
else
hwif->tp_ops->input_data(drive, cmd, buf, SECTOR_SIZE);
kunmap_atomic(buf, KM_BIO_SRC_IRQ);
#ifdef CONFIG_HIGHMEM
local_irq_restore(flags);
#endif
}
static void ide_pio_multi(ide_drive_t *drive, struct ide_cmd *cmd,
unsigned int write)
{
unsigned int nsect;
nsect = min_t(unsigned int, cmd->nleft, drive->mult_count);
while (nsect--)
ide_pio_sector(drive, cmd, write);
}
static void ide_pio_datablock(ide_drive_t *drive, struct ide_cmd *cmd,
unsigned int write)
{
u8 saved_io_32bit = drive->io_32bit;
if (cmd->tf_flags & IDE_TFLAG_FS)
cmd->rq->errors = 0;
if (cmd->tf_flags & IDE_TFLAG_IO_16BIT)
drive->io_32bit = 0;
touch_softlockup_watchdog();
switch (cmd->data_phase) {
case TASKFILE_MULTI_IN:
case TASKFILE_MULTI_OUT:
ide_pio_multi(drive, cmd, write);
break;
default:
ide_pio_sector(drive, cmd, write);
break;
}
drive->io_32bit = saved_io_32bit;
}
static ide_startstop_t task_error(ide_drive_t *drive, struct ide_cmd *cmd,
const char *s, u8 stat)
{
if (cmd->tf_flags & IDE_TFLAG_FS) {
int sectors = cmd->nsect - cmd->nleft;
switch (cmd->data_phase) {
case TASKFILE_IN:
if (cmd->nleft)
break;
/* fall through */
case TASKFILE_OUT:
sectors--;
break;
case TASKFILE_MULTI_IN:
if (cmd->nleft)
break;
/* fall through */
case TASKFILE_MULTI_OUT:
sectors -= drive->mult_count;
default:
break;
}
if (sectors > 0)
ide_end_request(drive, 1, sectors);
}
return ide_error(drive, s, stat);
}
void ide_finish_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat)
{
if ((cmd->tf_flags & IDE_TFLAG_FS) == 0) {
u8 err = ide_read_error(drive);
ide_complete_cmd(drive, cmd, stat, err);
ide_complete_rq(drive, err);
return;
}
ide_end_request(drive, 1, cmd->rq->nr_sectors);
}
/*
* We got an interrupt on a task_in case, but no errors and no DRQ.
*
* It might be a spurious irq (shared irq), but it might be a
* command that had no output.
*/
static ide_startstop_t task_in_unexpected(ide_drive_t *drive,
struct ide_cmd *cmd, u8 stat)
{
/* Command all done? */
if (OK_STAT(stat, ATA_DRDY, ATA_BUSY)) {
ide_finish_cmd(drive, cmd, stat);
return ide_stopped;
}
/* Assume it was a spurious irq */
ide_set_handler(drive, &task_in_intr, WAIT_WORSTCASE, NULL);
return ide_started;
}
/*
* Handler for command with PIO data-in phase (Read/Read Multiple).
*/
static ide_startstop_t task_in_intr(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
struct ide_cmd *cmd = &drive->hwif->cmd;
u8 stat = hwif->tp_ops->read_status(hwif);
/* Error? */
if (stat & ATA_ERR)
return task_error(drive, cmd, __func__, stat);
/* Didn't want any data? Odd. */
if ((stat & ATA_DRQ) == 0)
return task_in_unexpected(drive, cmd, stat);
ide_pio_datablock(drive, cmd, 0);
/* Are we done? Check status and finish transfer. */
if (cmd->nleft == 0) {
stat = wait_drive_not_busy(drive);
if (!OK_STAT(stat, 0, BAD_STAT))
return task_error(drive, cmd, __func__, stat);
ide_finish_cmd(drive, cmd, stat);
return ide_stopped;
}
/* Still data left to transfer. */
ide_set_handler(drive, &task_in_intr, WAIT_WORSTCASE, NULL);
return ide_started;
}
/*
* Handler for command with PIO data-out phase (Write/Write Multiple).
*/
static ide_startstop_t task_out_intr (ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
struct ide_cmd *cmd = &drive->hwif->cmd;
u8 stat = hwif->tp_ops->read_status(hwif);
if (!OK_STAT(stat, DRIVE_READY, drive->bad_wstat))
return task_error(drive, cmd, __func__, stat);
/* Deal with unexpected ATA data phase. */
if (((stat & ATA_DRQ) == 0) ^ (cmd->nleft == 0))
return task_error(drive, cmd, __func__, stat);
if (cmd->nleft == 0) {
ide_finish_cmd(drive, cmd, stat);
return ide_stopped;
}
/* Still data left to transfer. */
ide_pio_datablock(drive, cmd, 1);
ide_set_handler(drive, &task_out_intr, WAIT_WORSTCASE, NULL);
return ide_started;
}
static ide_startstop_t pre_task_out_intr(ide_drive_t *drive,
struct ide_cmd *cmd)
{
ide_startstop_t startstop;
if (ide_wait_stat(&startstop, drive, ATA_DRQ,
drive->bad_wstat, WAIT_DRQ)) {
printk(KERN_ERR "%s: no DRQ after issuing %sWRITE%s\n",
drive->name,
cmd->data_phase == TASKFILE_MULTI_OUT ? "MULT" : "",
(drive->dev_flags & IDE_DFLAG_LBA48) ? "_EXT" : "");
return startstop;
}
if ((drive->dev_flags & IDE_DFLAG_UNMASK) == 0)
local_irq_disable();
ide_set_handler(drive, &task_out_intr, WAIT_WORSTCASE, NULL);
ide_pio_datablock(drive, cmd, 1);
return ide_started;
}
int ide_raw_taskfile(ide_drive_t *drive, struct ide_cmd *cmd, u8 *buf,
u16 nsect)
{
struct request *rq;
int error;
rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
rq->buffer = buf;
/*
* (ks) We transfer currently only whole sectors.
* This is suffient for now. But, it would be great,
* if we would find a solution to transfer any size.
* To support special commands like READ LONG.
*/
rq->hard_nr_sectors = rq->nr_sectors = nsect;
rq->hard_cur_sectors = rq->current_nr_sectors = nsect;
if (cmd->tf_flags & IDE_TFLAG_WRITE)
rq->cmd_flags |= REQ_RW;
rq->special = cmd;
cmd->rq = rq;
error = blk_execute_rq(drive->queue, NULL, rq, 0);
blk_put_request(rq);
return error;
}
EXPORT_SYMBOL(ide_raw_taskfile);
int ide_no_data_taskfile(ide_drive_t *drive, struct ide_cmd *cmd)
{
cmd->data_phase = TASKFILE_NO_DATA;
return ide_raw_taskfile(drive, cmd, NULL, 0);
}
EXPORT_SYMBOL_GPL(ide_no_data_taskfile);
#ifdef CONFIG_IDE_TASK_IOCTL
int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg)
{
ide_task_request_t *req_task;
struct ide_cmd cmd;
u8 *outbuf = NULL;
u8 *inbuf = NULL;
u8 *data_buf = NULL;
int err = 0;
int tasksize = sizeof(struct ide_task_request_s);
unsigned int taskin = 0;
unsigned int taskout = 0;
u16 nsect = 0;
char __user *buf = (char __user *)arg;
// printk("IDE Taskfile ...\n");
req_task = kzalloc(tasksize, GFP_KERNEL);
if (req_task == NULL) return -ENOMEM;
if (copy_from_user(req_task, buf, tasksize)) {
kfree(req_task);
return -EFAULT;
}
taskout = req_task->out_size;
taskin = req_task->in_size;
if (taskin > 65536 || taskout > 65536) {
err = -EINVAL;
goto abort;
}
if (taskout) {
int outtotal = tasksize;
outbuf = kzalloc(taskout, GFP_KERNEL);
if (outbuf == NULL) {
err = -ENOMEM;
goto abort;
}
if (copy_from_user(outbuf, buf + outtotal, taskout)) {
err = -EFAULT;
goto abort;
}
}
if (taskin) {
int intotal = tasksize + taskout;
inbuf = kzalloc(taskin, GFP_KERNEL);
if (inbuf == NULL) {
err = -ENOMEM;
goto abort;
}
if (copy_from_user(inbuf, buf + intotal, taskin)) {
err = -EFAULT;
goto abort;
}
}
memset(&cmd, 0, sizeof(cmd));
memcpy(&cmd.tf_array[0], req_task->hob_ports,
HDIO_DRIVE_HOB_HDR_SIZE - 2);
memcpy(&cmd.tf_array[6], req_task->io_ports,
HDIO_DRIVE_TASK_HDR_SIZE);
cmd.data_phase = req_task->data_phase;
cmd.tf_flags = IDE_TFLAG_IO_16BIT | IDE_TFLAG_DEVICE |
IDE_TFLAG_IN_TF;
if (drive->dev_flags & IDE_DFLAG_LBA48)
cmd.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_IN_HOB);
if (req_task->out_flags.all) {
cmd.ftf_flags |= IDE_FTFLAG_FLAGGED;
if (req_task->out_flags.b.data)
cmd.ftf_flags |= IDE_FTFLAG_OUT_DATA;
if (req_task->out_flags.b.nsector_hob)
cmd.tf_flags |= IDE_TFLAG_OUT_HOB_NSECT;
if (req_task->out_flags.b.sector_hob)
cmd.tf_flags |= IDE_TFLAG_OUT_HOB_LBAL;
if (req_task->out_flags.b.lcyl_hob)
cmd.tf_flags |= IDE_TFLAG_OUT_HOB_LBAM;
if (req_task->out_flags.b.hcyl_hob)
cmd.tf_flags |= IDE_TFLAG_OUT_HOB_LBAH;
if (req_task->out_flags.b.error_feature)
cmd.tf_flags |= IDE_TFLAG_OUT_FEATURE;
if (req_task->out_flags.b.nsector)
cmd.tf_flags |= IDE_TFLAG_OUT_NSECT;
if (req_task->out_flags.b.sector)
cmd.tf_flags |= IDE_TFLAG_OUT_LBAL;
if (req_task->out_flags.b.lcyl)
cmd.tf_flags |= IDE_TFLAG_OUT_LBAM;
if (req_task->out_flags.b.hcyl)
cmd.tf_flags |= IDE_TFLAG_OUT_LBAH;
} else {
cmd.tf_flags |= IDE_TFLAG_OUT_TF;
if (cmd.tf_flags & IDE_TFLAG_LBA48)
cmd.tf_flags |= IDE_TFLAG_OUT_HOB;
}
if (req_task->in_flags.b.data)
cmd.ftf_flags |= IDE_FTFLAG_IN_DATA;
if (req_task->req_cmd == IDE_DRIVE_TASK_RAW_WRITE) {
/* fixup data phase if needed */
if (req_task->data_phase == TASKFILE_IN_DMAQ ||
req_task->data_phase == TASKFILE_IN_DMA)
cmd.data_phase = TASKFILE_OUT_DMA;
}
switch (cmd.data_phase) {
case TASKFILE_MULTI_OUT:
if (!drive->mult_count) {
/* (hs): give up if multcount is not set */
printk(KERN_ERR "%s: %s Multimode Write " \
"multcount is not set\n",
drive->name, __func__);
err = -EPERM;
goto abort;
}
/* fall through */
case TASKFILE_OUT:
/* fall through */
case TASKFILE_OUT_DMAQ:
case TASKFILE_OUT_DMA:
cmd.tf_flags |= IDE_TFLAG_WRITE;
nsect = taskout / SECTOR_SIZE;
data_buf = outbuf;
break;
case TASKFILE_MULTI_IN:
if (!drive->mult_count) {
/* (hs): give up if multcount is not set */
printk(KERN_ERR "%s: %s Multimode Read failure " \
"multcount is not set\n",
drive->name, __func__);
err = -EPERM;
goto abort;
}
/* fall through */
case TASKFILE_IN:
/* fall through */
case TASKFILE_IN_DMAQ:
case TASKFILE_IN_DMA:
nsect = taskin / SECTOR_SIZE;
data_buf = inbuf;
break;
case TASKFILE_NO_DATA:
break;
default:
err = -EFAULT;
goto abort;
}
if (req_task->req_cmd == IDE_DRIVE_TASK_NO_DATA)
nsect = 0;
else if (!nsect) {
nsect = (cmd.tf.hob_nsect << 8) | cmd.tf.nsect;
if (!nsect) {
printk(KERN_ERR "%s: in/out command without data\n",
drive->name);
err = -EFAULT;
goto abort;
}
}
err = ide_raw_taskfile(drive, &cmd, data_buf, nsect);
memcpy(req_task->hob_ports, &cmd.tf_array[0],
HDIO_DRIVE_HOB_HDR_SIZE - 2);
memcpy(req_task->io_ports, &cmd.tf_array[6],
HDIO_DRIVE_TASK_HDR_SIZE);
if ((cmd.ftf_flags & IDE_FTFLAG_SET_IN_FLAGS) &&
req_task->in_flags.all == 0) {
req_task->in_flags.all = IDE_TASKFILE_STD_IN_FLAGS;
if (drive->dev_flags & IDE_DFLAG_LBA48)
req_task->in_flags.all |= (IDE_HOB_STD_IN_FLAGS << 8);
}
if (copy_to_user(buf, req_task, tasksize)) {
err = -EFAULT;
goto abort;
}
if (taskout) {
int outtotal = tasksize;
if (copy_to_user(buf + outtotal, outbuf, taskout)) {
err = -EFAULT;
goto abort;
}
}
if (taskin) {
int intotal = tasksize + taskout;
if (copy_to_user(buf + intotal, inbuf, taskin)) {
err = -EFAULT;
goto abort;
}
}
abort:
kfree(req_task);
kfree(outbuf);
kfree(inbuf);
// printk("IDE Taskfile ioctl ended. rc = %i\n", err);
return err;
}
#endif