dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/fs/ceph/mds_client.c

3455 lines
87 KiB
C
Raw Permalink Normal View History

ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
#include <linux/ceph/ceph_debug.h>
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph: switch from BKL to lock_flocks() Switch from using the BKL explicitly to the new lock_flocks() interface. Eventually this will turn into a spinlock. Signed-off-by: Sage Weil <sage@newdream.net>
2010-09-23 02:57:10 +00:00
#include <linux/fs.h>
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
#include <linux/wait.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
#include <linux/sched.h>
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
#include <linux/debugfs.h>
#include <linux/seq_file.h>
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
#include "super.h"
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
#include "mds_client.h"
libceph: move feature bits to separate header This is simply cleanup that will keep things more closely synced with the userland code. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-07-30 23:23:22 +00:00
#include <linux/ceph/ceph_features.h>
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
#include <linux/ceph/messenger.h>
#include <linux/ceph/decode.h>
#include <linux/ceph/pagelist.h>
#include <linux/ceph/auth.h>
#include <linux/ceph/debugfs.h>
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
/*
* A cluster of MDS (metadata server) daemons is responsible for
* managing the file system namespace (the directory hierarchy and
* inodes) and for coordinating shared access to storage. Metadata is
* partitioning hierarchically across a number of servers, and that
* partition varies over time as the cluster adjusts the distribution
* in order to balance load.
*
* The MDS client is primarily responsible to managing synchronous
* metadata requests for operations like open, unlink, and so forth.
* If there is a MDS failure, we find out about it when we (possibly
* request and) receive a new MDS map, and can resubmit affected
* requests.
*
* For the most part, though, we take advantage of a lossless
* communications channel to the MDS, and do not need to worry about
* timing out or resubmitting requests.
*
* We maintain a stateful "session" with each MDS we interact with.
* Within each session, we sent periodic heartbeat messages to ensure
* any capabilities or leases we have been issues remain valid. If
* the session times out and goes stale, our leases and capabilities
* are no longer valid.
*/
ceph: support v2 reconnect encoding Encode either old or v2 encoding of client_reconnect message, depending on whether the peer has the FLOCK feature bit. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-12 22:21:32 +00:00
struct ceph_reconnect_state {
struct ceph_pagelist *pagelist;
bool flock;
};
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
static void __wake_requests(struct ceph_mds_client *mdsc,
struct list_head *head);
ceph: Storage class should be before const qualifier The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-20 08:40:19 +00:00
static const struct ceph_connection_operations mds_con_ops;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
/*
* mds reply parsing
*/
/*
* parse individual inode info
*/
static int parse_reply_info_in(void **p, void *end,
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 01:37:52 +00:00
struct ceph_mds_reply_info_in *info,
int features)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
{
int err = -EIO;
info->in = *p;
*p += sizeof(struct ceph_mds_reply_inode) +
sizeof(*info->in->fragtree.splits) *
le32_to_cpu(info->in->fragtree.nsplits);
ceph_decode_32_safe(p, end, info->symlink_len, bad);
ceph_decode_need(p, end, info->symlink_len, bad);
info->symlink = *p;
*p += info->symlink_len;
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 01:37:52 +00:00
if (features & CEPH_FEATURE_DIRLAYOUTHASH)
ceph_decode_copy_safe(p, end, &info->dir_layout,
sizeof(info->dir_layout), bad);
else
memset(&info->dir_layout, 0, sizeof(info->dir_layout));
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph_decode_32_safe(p, end, info->xattr_len, bad);
ceph_decode_need(p, end, info->xattr_len, bad);
info->xattr_data = *p;
*p += info->xattr_len;
return 0;
bad:
return err;
}
/*
* parse a normal reply, which may contain a (dir+)dentry and/or a
* target inode.
*/
static int parse_reply_info_trace(void **p, void *end,
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 01:37:52 +00:00
struct ceph_mds_reply_info_parsed *info,
int features)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
{
int err;
if (info->head->is_dentry) {
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 01:37:52 +00:00
err = parse_reply_info_in(p, end, &info->diri, features);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
if (err < 0)
goto out_bad;
if (unlikely(*p + sizeof(*info->dirfrag) > end))
goto bad;
info->dirfrag = *p;
*p += sizeof(*info->dirfrag) +
sizeof(u32)*le32_to_cpu(info->dirfrag->ndist);
if (unlikely(*p > end))
goto bad;
ceph_decode_32_safe(p, end, info->dname_len, bad);
ceph_decode_need(p, end, info->dname_len, bad);
info->dname = *p;
*p += info->dname_len;
info->dlease = *p;
*p += sizeof(*info->dlease);
}
if (info->head->is_target) {
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 01:37:52 +00:00
err = parse_reply_info_in(p, end, &info->targeti, features);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
if (err < 0)
goto out_bad;
}
if (unlikely(*p != end))
goto bad;
return 0;
bad:
err = -EIO;
out_bad:
pr_err("problem parsing mds trace %d\n", err);
return err;
}
/*
* parse readdir results
*/
static int parse_reply_info_dir(void **p, void *end,
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 01:37:52 +00:00
struct ceph_mds_reply_info_parsed *info,
int features)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
{
u32 num, i = 0;
int err;
info->dir_dir = *p;
if (*p + sizeof(*info->dir_dir) > end)
goto bad;
*p += sizeof(*info->dir_dir) +
sizeof(u32)*le32_to_cpu(info->dir_dir->ndist);
if (*p > end)
goto bad;
ceph_decode_need(p, end, sizeof(num) + 2, bad);
ceph: convert encode/decode macros to inlines This avoids the fugly pass by reference and makes the code a bit easier to read. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-14 16:59:09 +00:00
num = ceph_decode_32(p);
info->dir_end = ceph_decode_8(p);
info->dir_complete = ceph_decode_8(p);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
if (num == 0)
goto done;
/* alloc large array */
info->dir_nr = num;
info->dir_in = kcalloc(num, sizeof(*info->dir_in) +
sizeof(*info->dir_dname) +
sizeof(*info->dir_dname_len) +
sizeof(*info->dir_dlease),
GFP_NOFS);
if (info->dir_in == NULL) {
err = -ENOMEM;
goto out_bad;
}
info->dir_dname = (void *)(info->dir_in + num);
info->dir_dname_len = (void *)(info->dir_dname + num);
info->dir_dlease = (void *)(info->dir_dname_len + num);
while (num) {
/* dentry */
ceph_decode_need(p, end, sizeof(u32)*2, bad);
ceph: convert encode/decode macros to inlines This avoids the fugly pass by reference and makes the code a bit easier to read. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-14 16:59:09 +00:00
info->dir_dname_len[i] = ceph_decode_32(p);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph_decode_need(p, end, info->dir_dname_len[i], bad);
info->dir_dname[i] = *p;
*p += info->dir_dname_len[i];
dout("parsed dir dname '%.*s'\n", info->dir_dname_len[i],
info->dir_dname[i]);
info->dir_dlease[i] = *p;
*p += sizeof(struct ceph_mds_reply_lease);
/* inode */
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 01:37:52 +00:00
err = parse_reply_info_in(p, end, &info->dir_in[i], features);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
if (err < 0)
goto out_bad;
i++;
num--;
}
done:
if (*p != end)
goto bad;
return 0;
bad:
err = -EIO;
out_bad:
pr_err("problem parsing dir contents %d\n", err);
return err;
}
ceph: Handle file locks in replies from the MDS. Previously the kernel client incorrectly assumed everything was a directory. Signed-off-by: Herb Shiu <herb_shiu@tcloudcomputing.com> Acked-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-01 22:14:38 +00:00
/*
* parse fcntl F_GETLK results
*/
static int parse_reply_info_filelock(void **p, void *end,
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 01:37:52 +00:00
struct ceph_mds_reply_info_parsed *info,
int features)
ceph: Handle file locks in replies from the MDS. Previously the kernel client incorrectly assumed everything was a directory. Signed-off-by: Herb Shiu <herb_shiu@tcloudcomputing.com> Acked-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-01 22:14:38 +00:00
{
if (*p + sizeof(*info->filelock_reply) > end)
goto bad;
info->filelock_reply = *p;
*p += sizeof(*info->filelock_reply);
if (unlikely(*p != end))
goto bad;
return 0;
bad:
return -EIO;
}
/*
* parse extra results
*/
static int parse_reply_info_extra(void **p, void *end,
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 01:37:52 +00:00
struct ceph_mds_reply_info_parsed *info,
int features)
ceph: Handle file locks in replies from the MDS. Previously the kernel client incorrectly assumed everything was a directory. Signed-off-by: Herb Shiu <herb_shiu@tcloudcomputing.com> Acked-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-01 22:14:38 +00:00
{
if (info->head->op == CEPH_MDS_OP_GETFILELOCK)
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 01:37:52 +00:00
return parse_reply_info_filelock(p, end, info, features);
ceph: Handle file locks in replies from the MDS. Previously the kernel client incorrectly assumed everything was a directory. Signed-off-by: Herb Shiu <herb_shiu@tcloudcomputing.com> Acked-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-01 22:14:38 +00:00
else
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 01:37:52 +00:00
return parse_reply_info_dir(p, end, info, features);
ceph: Handle file locks in replies from the MDS. Previously the kernel client incorrectly assumed everything was a directory. Signed-off-by: Herb Shiu <herb_shiu@tcloudcomputing.com> Acked-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-01 22:14:38 +00:00
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
/*
* parse entire mds reply
*/
static int parse_reply_info(struct ceph_msg *msg,
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 01:37:52 +00:00
struct ceph_mds_reply_info_parsed *info,
int features)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
{
void *p, *end;
u32 len;
int err;
info->head = msg->front.iov_base;
p = msg->front.iov_base + sizeof(struct ceph_mds_reply_head);
end = p + msg->front.iov_len - sizeof(struct ceph_mds_reply_head);
/* trace */
ceph_decode_32_safe(&p, end, len, bad);
if (len > 0) {
ceph: fix length validation in parse_reply_info() "len" is read from network and thus needs validation. Otherwise, given a bogus "len" value, p+len could be an out-of-bounds pointer, which is used in further parsing. Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2012-01-15 03:20:59 +00:00
ceph_decode_need(&p, end, len, bad);
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 01:37:52 +00:00
err = parse_reply_info_trace(&p, p+len, info, features);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
if (err < 0)
goto out_bad;
}
ceph: Handle file locks in replies from the MDS. Previously the kernel client incorrectly assumed everything was a directory. Signed-off-by: Herb Shiu <herb_shiu@tcloudcomputing.com> Acked-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-01 22:14:38 +00:00
/* extra */
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph_decode_32_safe(&p, end, len, bad);
if (len > 0) {
ceph: fix length validation in parse_reply_info() "len" is read from network and thus needs validation. Otherwise, given a bogus "len" value, p+len could be an out-of-bounds pointer, which is used in further parsing. Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2012-01-15 03:20:59 +00:00
ceph_decode_need(&p, end, len, bad);
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 01:37:52 +00:00
err = parse_reply_info_extra(&p, p+len, info, features);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
if (err < 0)
goto out_bad;
}
/* snap blob */
ceph_decode_32_safe(&p, end, len, bad);
info->snapblob_len = len;
info->snapblob = p;
p += len;
if (p != end)
goto bad;
return 0;
bad:
err = -EIO;
out_bad:
pr_err("mds parse_reply err %d\n", err);
return err;
}
static void destroy_reply_info(struct ceph_mds_reply_info_parsed *info)
{
kfree(info->dir_in);
}
/*
* sessions
*/
static const char *session_state_name(int s)
{
switch (s) {
case CEPH_MDS_SESSION_NEW: return "new";
case CEPH_MDS_SESSION_OPENING: return "opening";
case CEPH_MDS_SESSION_OPEN: return "open";
case CEPH_MDS_SESSION_HUNG: return "hung";
case CEPH_MDS_SESSION_CLOSING: return "closing";
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-15 20:08:46 +00:00
case CEPH_MDS_SESSION_RESTARTING: return "restarting";
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
case CEPH_MDS_SESSION_RECONNECTING: return "reconnecting";
default: return "???";
}
}
static struct ceph_mds_session *get_session(struct ceph_mds_session *s)
{
if (atomic_inc_not_zero(&s->s_ref)) {
dout("mdsc get_session %p %d -> %d\n", s,
atomic_read(&s->s_ref)-1, atomic_read(&s->s_ref));
return s;
} else {
dout("mdsc get_session %p 0 -- FAIL", s);
return NULL;
}
}
void ceph_put_mds_session(struct ceph_mds_session *s)
{
dout("mdsc put_session %p %d -> %d\n", s,
atomic_read(&s->s_ref), atomic_read(&s->s_ref)-1);
ceph: negotiate authentication protocol; implement AUTH_NONE protocol When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 00:19:57 +00:00
if (atomic_dec_and_test(&s->s_ref)) {
ceph: define ceph_auth_handshake type The definitions for the ceph_mds_session and ceph_osd both contain five fields related only to "authorizers." Encapsulate those fields into their own struct type, allowing for better isolation in some upcoming patches. Fix the #includes in "linux/ceph/osd_client.h" to lay out their more complete canonical path. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-16 20:16:38 +00:00
if (s->s_auth.authorizer)
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
s->s_mdsc->fsc->client->monc.auth->ops->destroy_authorizer(
s->s_mdsc->fsc->client->monc.auth,
ceph: define ceph_auth_handshake type The definitions for the ceph_mds_session and ceph_osd both contain five fields related only to "authorizers." Encapsulate those fields into their own struct type, allowing for better isolation in some upcoming patches. Fix the #includes in "linux/ceph/osd_client.h" to lay out their more complete canonical path. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-16 20:16:38 +00:00
s->s_auth.authorizer);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
kfree(s);
ceph: negotiate authentication protocol; implement AUTH_NONE protocol When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 00:19:57 +00:00
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
/*
* called under mdsc->mutex
*/
struct ceph_mds_session *__ceph_lookup_mds_session(struct ceph_mds_client *mdsc,
int mds)
{
struct ceph_mds_session *session;
if (mds >= mdsc->max_sessions || mdsc->sessions[mds] == NULL)
return NULL;
session = mdsc->sessions[mds];
dout("lookup_mds_session %p %d\n", session,
atomic_read(&session->s_ref));
get_session(session);
return session;
}
static bool __have_session(struct ceph_mds_client *mdsc, int mds)
{
if (mds >= mdsc->max_sessions)
return false;
return mdsc->sessions[mds];
}
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-22 23:12:16 +00:00
static int __verify_registered_session(struct ceph_mds_client *mdsc,
struct ceph_mds_session *s)
{
if (s->s_mds >= mdsc->max_sessions ||
mdsc->sessions[s->s_mds] != s)
return -ENOENT;
return 0;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
/*
* create+register a new session for given mds.
* called under mdsc->mutex.
*/
static struct ceph_mds_session *register_session(struct ceph_mds_client *mdsc,
int mds)
{
struct ceph_mds_session *s;
s = kzalloc(sizeof(*s), GFP_NOFS);
ceph: handle kmalloc() failure Return ERR_PTR(-ENOMEM) if kmalloc() fails. We handle allocation failures the same way later in the function. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-20 12:30:16 +00:00
if (!s)
return ERR_PTR(-ENOMEM);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
s->s_mdsc = mdsc;
s->s_mds = mds;
s->s_state = CEPH_MDS_SESSION_NEW;
s->s_ttl = 0;
s->s_seq = 0;
mutex_init(&s->s_mutex);
libceph: set peer name on con_open, not init The peer name may change on each open attempt, even when the connection is reused. Signed-off-by: Sage Weil <sage@inktank.com>
2012-06-27 19:24:08 +00:00
ceph_con_init(&s->s_con, s, &mds_con_ops, &mdsc->fsc->client->msgr);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph: create a new session lock to avoid lock inversion Lockdep was reporting a possible circular lock dependency in dentry_lease_is_valid(). That function needs to sample the session's s_cap_gen and and s_cap_ttl fields coherently, but needs to do so while holding a dentry lock. The s_cap_lock field was being used to protect the two fields, but that can't be taken while holding a lock on a dentry within the session. In most cases, the s_cap_gen and s_cap_ttl fields only get operated on separately. But in three cases they need to be updated together. Implement a new lock to protect the spots updating both fields atomically is required. Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
2012-01-13 01:48:10 +00:00
spin_lock_init(&s->s_gen_ttl_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
s->s_cap_gen = 0;
ceph: don't reset s_cap_ttl to zero Avoid the need to check for a special zero s_cap_ttl value by just using (jiffies - 1) as the value assigned to indicate "sometime in the past." Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
2012-01-13 01:48:11 +00:00
s->s_cap_ttl = jiffies - 1;
ceph: create a new session lock to avoid lock inversion Lockdep was reporting a possible circular lock dependency in dentry_lease_is_valid(). That function needs to sample the session's s_cap_gen and and s_cap_ttl fields coherently, but needs to do so while holding a dentry lock. The s_cap_lock field was being used to protect the two fields, but that can't be taken while holding a lock on a dentry within the session. In most cases, the s_cap_gen and s_cap_ttl fields only get operated on separately. But in three cases they need to be updated together. Implement a new lock to protect the spots updating both fields atomically is required. Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
2012-01-13 01:48:10 +00:00
spin_lock_init(&s->s_cap_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
s->s_renew_requested = 0;
s->s_renew_seq = 0;
INIT_LIST_HEAD(&s->s_caps);
s->s_nr_caps = 0;
ceph: do not touch_caps while iterating over caps list Avoid confusing iterate_session_caps(), flag the session while we are iterating so that __touch_cap does not rearrange items on the list. All other modifiers of session->s_caps do so under the protection of s_mutex. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-22 04:40:34 +00:00
s->s_trim_caps = 0;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
atomic_set(&s->s_ref, 1);
INIT_LIST_HEAD(&s->s_waiting);
INIT_LIST_HEAD(&s->s_unsafe);
s->s_num_cap_releases = 0;
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 19:39:45 +00:00
s->s_cap_iterator = NULL;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
INIT_LIST_HEAD(&s->s_cap_releases);
INIT_LIST_HEAD(&s->s_cap_releases_done);
INIT_LIST_HEAD(&s->s_cap_flushing);
INIT_LIST_HEAD(&s->s_cap_snaps_flushing);
dout("register_session mds%d\n", mds);
if (mds >= mdsc->max_sessions) {
int newmax = 1 << get_count_order(mds+1);
struct ceph_mds_session **sa;
dout("register_session realloc to %d\n", newmax);
sa = kcalloc(newmax, sizeof(void *), GFP_NOFS);
if (sa == NULL)
ceph: remove bad calls to ceph_con_shutdown We want to ceph_con_close when we're done with the connection, before the ref count reaches 0. Once it does, do not call ceph_con_shutdown, as that takes the con mutex and may sleep, and besides that is unnecessary. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-18 19:22:36 +00:00
goto fail_realloc;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
if (mdsc->sessions) {
memcpy(sa, mdsc->sessions,
mdsc->max_sessions * sizeof(void *));
kfree(mdsc->sessions);
}
mdsc->sessions = sa;
mdsc->max_sessions = newmax;
}
mdsc->sessions[mds] = s;
atomic_inc(&s->s_ref); /* one ref to sessions[], one to caller */
ceph: remove bad calls to ceph_con_shutdown We want to ceph_con_close when we're done with the connection, before the ref count reaches 0. Once it does, do not call ceph_con_shutdown, as that takes the con mutex and may sleep, and besides that is unnecessary. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-18 19:22:36 +00:00
libceph: set peer name on con_open, not init The peer name may change on each open attempt, even when the connection is reused. Signed-off-by: Sage Weil <sage@inktank.com>
2012-06-27 19:24:08 +00:00
ceph_con_open(&s->s_con, CEPH_ENTITY_TYPE_MDS, mds,
ceph_mdsmap_get_addr(mdsc->mdsmap, mds));
ceph: remove bad calls to ceph_con_shutdown We want to ceph_con_close when we're done with the connection, before the ref count reaches 0. Once it does, do not call ceph_con_shutdown, as that takes the con mutex and may sleep, and besides that is unnecessary. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-18 19:22:36 +00:00
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
return s;
ceph: remove bad calls to ceph_con_shutdown We want to ceph_con_close when we're done with the connection, before the ref count reaches 0. Once it does, do not call ceph_con_shutdown, as that takes the con mutex and may sleep, and besides that is unnecessary. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-18 19:22:36 +00:00
fail_realloc:
kfree(s);
return ERR_PTR(-ENOMEM);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
/*
* called under mdsc->mutex
*/
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-22 23:12:16 +00:00
static void __unregister_session(struct ceph_mds_client *mdsc,
ceph: remove bad calls to ceph_con_shutdown We want to ceph_con_close when we're done with the connection, before the ref count reaches 0. Once it does, do not call ceph_con_shutdown, as that takes the con mutex and may sleep, and besides that is unnecessary. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-18 19:22:36 +00:00
struct ceph_mds_session *s)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
{
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-22 23:12:16 +00:00
dout("__unregister_session mds%d %p\n", s->s_mds, s);
BUG_ON(mdsc->sessions[s->s_mds] != s);
ceph: remove bad calls to ceph_con_shutdown We want to ceph_con_close when we're done with the connection, before the ref count reaches 0. Once it does, do not call ceph_con_shutdown, as that takes the con mutex and may sleep, and besides that is unnecessary. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-18 19:22:36 +00:00
mdsc->sessions[s->s_mds] = NULL;
ceph_con_close(&s->s_con);
ceph_put_mds_session(s);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
/*
* drop session refs in request.
*
* should be last request ref, or hold mdsc->mutex
*/
static void put_request_session(struct ceph_mds_request *req)
{
if (req->r_session) {
ceph_put_mds_session(req->r_session);
req->r_session = NULL;
}
}
ceph: use kref for struct ceph_mds_request Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-07 20:31:09 +00:00
void ceph_mdsc_release_request(struct kref *kref)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
{
ceph: use kref for struct ceph_mds_request Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-07 20:31:09 +00:00
struct ceph_mds_request *req = container_of(kref,
struct ceph_mds_request,
r_kref);
if (req->r_request)
ceph_msg_put(req->r_request);
if (req->r_reply) {
ceph_msg_put(req->r_reply);
destroy_reply_info(&req->r_reply_info);
}
if (req->r_inode) {
ceph: explicitly reference rename old_dentry parent dir in request We carry a pin on the parent directory for the rename source and dest dentries. For the source it's r_locked_dir; we need to explicitly reference the old_dentry parent as well, since the dentry's d_parent may change between when the request was created and pinned and when it is freed. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26 18:31:14 +00:00
ceph_put_cap_refs(ceph_inode(req->r_inode), CEPH_CAP_PIN);
ceph: use kref for struct ceph_mds_request Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-07 20:31:09 +00:00
iput(req->r_inode);
}
if (req->r_locked_dir)
ceph: explicitly reference rename old_dentry parent dir in request We carry a pin on the parent directory for the rename source and dest dentries. For the source it's r_locked_dir; we need to explicitly reference the old_dentry parent as well, since the dentry's d_parent may change between when the request was created and pinned and when it is freed. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26 18:31:14 +00:00
ceph_put_cap_refs(ceph_inode(req->r_locked_dir), CEPH_CAP_PIN);
ceph: use kref for struct ceph_mds_request Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-07 20:31:09 +00:00
if (req->r_target_inode)
iput(req->r_target_inode);
if (req->r_dentry)
dput(req->r_dentry);
if (req->r_old_dentry) {
ceph: explicitly reference rename old_dentry parent dir in request We carry a pin on the parent directory for the rename source and dest dentries. For the source it's r_locked_dir; we need to explicitly reference the old_dentry parent as well, since the dentry's d_parent may change between when the request was created and pinned and when it is freed. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26 18:31:14 +00:00
/*
* track (and drop pins for) r_old_dentry_dir
* separately, since r_old_dentry's d_parent may have
* changed between the dir mutex being dropped and
* this request being freed.
*/
ceph_put_cap_refs(ceph_inode(req->r_old_dentry_dir),
CEPH_CAP_PIN);
ceph: use kref for struct ceph_mds_request Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-07 20:31:09 +00:00
dput(req->r_old_dentry);
ceph: explicitly reference rename old_dentry parent dir in request We carry a pin on the parent directory for the rename source and dest dentries. For the source it's r_locked_dir; we need to explicitly reference the old_dentry parent as well, since the dentry's d_parent may change between when the request was created and pinned and when it is freed. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26 18:31:14 +00:00
iput(req->r_old_dentry_dir);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
ceph: use kref for struct ceph_mds_request Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-07 20:31:09 +00:00
kfree(req->r_path1);
kfree(req->r_path2);
put_request_session(req);
ceph: do caps accounting per mds_client Caps related accounting is now being done per mds client instead of just being global. This prepares ground work for a later revision of the caps preallocated reservation list. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-17 23:16:12 +00:00
ceph_unreserve_caps(req->r_mdsc, &req->r_caps_reservation);
ceph: use kref for struct ceph_mds_request Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-07 20:31:09 +00:00
kfree(req);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
/*
* lookup session, bump ref if found.
*
* called under mdsc->mutex.
*/
static struct ceph_mds_request *__lookup_request(struct ceph_mds_client *mdsc,
u64 tid)
{
struct ceph_mds_request *req;
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-15 20:08:46 +00:00
struct rb_node *n = mdsc->request_tree.rb_node;
while (n) {
req = rb_entry(n, struct ceph_mds_request, r_node);
if (tid < req->r_tid)
n = n->rb_left;
else if (tid > req->r_tid)
n = n->rb_right;
else {
ceph_mdsc_get_request(req);
return req;
}
}
return NULL;
}
static void __insert_request(struct ceph_mds_client *mdsc,
struct ceph_mds_request *new)
{
struct rb_node **p = &mdsc->request_tree.rb_node;
struct rb_node *parent = NULL;
struct ceph_mds_request *req = NULL;
while (*p) {
parent = *p;
req = rb_entry(parent, struct ceph_mds_request, r_node);
if (new->r_tid < req->r_tid)
p = &(*p)->rb_left;
else if (new->r_tid > req->r_tid)
p = &(*p)->rb_right;
else
BUG();
}
rb_link_node(&new->r_node, parent, p);
rb_insert_color(&new->r_node, &mdsc->request_tree);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
/*
* Register an in-flight request, and assign a tid. Link to directory
* are modifying (if any).
*
* Called under mdsc->mutex.
*/
static void __register_request(struct ceph_mds_client *mdsc,
struct ceph_mds_request *req,
struct inode *dir)
{
req->r_tid = ++mdsc->last_tid;
if (req->r_num_caps)
ceph: do caps accounting per mds_client Caps related accounting is now being done per mds client instead of just being global. This prepares ground work for a later revision of the caps preallocated reservation list. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-17 23:16:12 +00:00
ceph_reserve_caps(mdsc, &req->r_caps_reservation,
req->r_num_caps);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
dout("__register_request %p tid %lld\n", req, req->r_tid);
ceph_mdsc_get_request(req);
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-15 20:08:46 +00:00
__insert_request(mdsc, req);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph: fix uid/gid on resent mds requests MDS requests can be rebuilt and resent in non-process context, but were filling in uid/gid from current_fsuid/gid. Put that information in the request struct on request setup. This fixes incorrect (and root) uid/gid getting set for requests that are forwarded between MDSs, usually due to metadata migrations. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-08 15:28:52 +00:00
req->r_uid = current_fsuid();
req->r_gid = current_fsgid();
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
if (dir) {
struct ceph_inode_info *ci = ceph_inode(dir);
ceph: take reference on mds request r_unsafe_dir We put ourselves on an inode list for the parent directory of metadata operations so that an fsync on the directory will wait for metadata updates to commit to disk. We weren't holding a reference to that directory, however, and under certain workloads (fsstress in this case) the directory can go away. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-18 23:12:12 +00:00
ihold(dir);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
spin_lock(&ci->i_unsafe_lock);
req->r_unsafe_dir = dir;
list_add_tail(&req->r_unsafe_dir_item, &ci->i_unsafe_dirops);
spin_unlock(&ci->i_unsafe_lock);
}
}
static void __unregister_request(struct ceph_mds_client *mdsc,
struct ceph_mds_request *req)
{
dout("__unregister_request %p tid %lld\n", req, req->r_tid);
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-15 20:08:46 +00:00
rb_erase(&req->r_node, &mdsc->request_tree);
ceph: fix mds sync() race with completing requests The wait_unsafe_requests() helper dropped the mdsc mutex to wait for each request to complete, and then examined r_node to get the next request after retaking the lock. But the request completion removes the request from the tree, so r_node was always undefined at this point. Since it's a small race, it usually led to a valid request, but not always. The result was an occasional crash in rb_next() while dereferencing node->rb_left. Fix this by clearing the rb_node when removing the request from the request tree, and not walking off into the weeds when we are done waiting for a request. Since the request we waited on will _always_ be out of the request tree, take a ref on the next request, in the hopes that it won't be. But if it is, it's ok: we can start over from the beginning (and traverse over older read requests again). Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-16 22:28:54 +00:00
RB_CLEAR_NODE(&req->r_node);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
if (req->r_unsafe_dir) {
struct ceph_inode_info *ci = ceph_inode(req->r_unsafe_dir);
spin_lock(&ci->i_unsafe_lock);
list_del_init(&req->r_unsafe_dir_item);
spin_unlock(&ci->i_unsafe_lock);
ceph: take reference on mds request r_unsafe_dir We put ourselves on an inode list for the parent directory of metadata operations so that an fsync on the directory will wait for metadata updates to commit to disk. We weren't holding a reference to that directory, however, and under certain workloads (fsstress in this case) the directory can go away. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-18 23:12:12 +00:00
iput(req->r_unsafe_dir);
req->r_unsafe_dir = NULL;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
ceph: fix use after free on mds __unregister_request There was a use after free in __unregister_request that would trigger whenever the request map held the last reference. This appears to have triggered an oops during 'umount -f' when requests are being torn down. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-29 04:22:50 +00:00
ceph_mdsc_put_request(req);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
/*
* Choose mds to send request to next. If there is a hint set in the
* request (e.g., due to a prior forward hint from the mds), use that.
* Otherwise, consult frag tree and/or caps to identify the
* appropriate mds. If all else fails, choose randomly.
*
* Called under mdsc->mutex.
*/
ceph/mds_client.c: quiet sparse noise Quiet the following sparse noise: warning: symbol 'get_nonsnap_parent' was not declared. Should it be static? warning: symbol 'done_closing_sessions' was not declared. Should it be static? Local functions don't need external visability. Make them static. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Sage Weil <sage@newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-09-23 20:22:11 +00:00
static struct dentry *get_nonsnap_parent(struct dentry *dentry)
ceph: direct requests in snapped namespace based on nonsnap parent When making a request in the virtual snapdir or a snapped portion of the namespace, we should choose the MDS based on the first nonsnap parent (and its caps). If that is not the best place, we will get forward hints to find the right MDS in the cluster. This fixes ESTALE errors when using the .snap directory and namespace with multiple MDSs. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-16 16:21:27 +00:00
{
ceph: document unlocked d_parent accesses For the most part we don't care about racing with rename when directing MDS requests; either the old or new parent is fine. Document that, and do some minor cleanup. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26 18:31:26 +00:00
/*
* we don't need to worry about protecting the d_parent access
* here because we never renaming inside the snapped namespace
* except to resplice to another snapdir, and either the old or new
* result is a valid result.
*/
ceph: direct requests in snapped namespace based on nonsnap parent When making a request in the virtual snapdir or a snapped portion of the namespace, we should choose the MDS based on the first nonsnap parent (and its caps). If that is not the best place, we will get forward hints to find the right MDS in the cluster. This fixes ESTALE errors when using the .snap directory and namespace with multiple MDSs. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-16 16:21:27 +00:00
while (!IS_ROOT(dentry) && ceph_snap(dentry->d_inode) != CEPH_NOSNAP)
dentry = dentry->d_parent;
return dentry;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
static int __choose_mds(struct ceph_mds_client *mdsc,
struct ceph_mds_request *req)
{
struct inode *inode;
struct ceph_inode_info *ci;
struct ceph_cap *cap;
int mode = req->r_direct_mode;
int mds = -1;
u32 hash = req->r_direct_hash;
bool is_hash = req->r_direct_is_hash;
/*
* is there a specific mds we should try? ignore hint if we have
* no session and the mds is not up (active or recovering).
*/
if (req->r_resend_mds >= 0 &&
(__have_session(mdsc, req->r_resend_mds) ||
ceph_mdsmap_get_state(mdsc->mdsmap, req->r_resend_mds) > 0)) {
dout("choose_mds using resend_mds mds%d\n",
req->r_resend_mds);
return req->r_resend_mds;
}
if (mode == USE_RANDOM_MDS)
goto random;
inode = NULL;
if (req->r_inode) {
inode = req->r_inode;
} else if (req->r_dentry) {
ceph: document unlocked d_parent accesses For the most part we don't care about racing with rename when directing MDS requests; either the old or new parent is fine. Document that, and do some minor cleanup. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26 18:31:26 +00:00
/* ignore race with rename; old or new d_parent is okay */
struct dentry *parent = req->r_dentry->d_parent;
struct inode *dir = parent->d_inode;
ceph: direct requests in snapped namespace based on nonsnap parent When making a request in the virtual snapdir or a snapped portion of the namespace, we should choose the MDS based on the first nonsnap parent (and its caps). If that is not the best place, we will get forward hints to find the right MDS in the cluster. This fixes ESTALE errors when using the .snap directory and namespace with multiple MDSs. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-16 16:21:27 +00:00
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
if (dir->i_sb != mdsc->fsc->sb) {
ceph: direct requests in snapped namespace based on nonsnap parent When making a request in the virtual snapdir or a snapped portion of the namespace, we should choose the MDS based on the first nonsnap parent (and its caps). If that is not the best place, we will get forward hints to find the right MDS in the cluster. This fixes ESTALE errors when using the .snap directory and namespace with multiple MDSs. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-16 16:21:27 +00:00
/* not this fs! */
inode = req->r_dentry->d_inode;
} else if (ceph_snap(dir) != CEPH_NOSNAP) {
/* direct snapped/virtual snapdir requests
* based on parent dir inode */
ceph: document unlocked d_parent accesses For the most part we don't care about racing with rename when directing MDS requests; either the old or new parent is fine. Document that, and do some minor cleanup. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26 18:31:26 +00:00
struct dentry *dn = get_nonsnap_parent(parent);
ceph: direct requests in snapped namespace based on nonsnap parent When making a request in the virtual snapdir or a snapped portion of the namespace, we should choose the MDS based on the first nonsnap parent (and its caps). If that is not the best place, we will get forward hints to find the right MDS in the cluster. This fixes ESTALE errors when using the .snap directory and namespace with multiple MDSs. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-16 16:21:27 +00:00
inode = dn->d_inode;
dout("__choose_mds using nonsnap parent %p\n", inode);
} else if (req->r_dentry->d_inode) {
/* dentry target */
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
inode = req->r_dentry->d_inode;
} else {
ceph: direct requests in snapped namespace based on nonsnap parent When making a request in the virtual snapdir or a snapped portion of the namespace, we should choose the MDS based on the first nonsnap parent (and its caps). If that is not the best place, we will get forward hints to find the right MDS in the cluster. This fixes ESTALE errors when using the .snap directory and namespace with multiple MDSs. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-16 16:21:27 +00:00
/* dir + name */
inode = dir;
ceph: avoid d_parent in ceph_dentry_hash; fix ceph_encode_fh() hashing bug Have caller pass in a safely-obtained reference to the parent directory for calculating a dentry's hash valud. While we're here, simpify the flow through ceph_encode_fh() so that there is a single exit point and cleanup. Also fix a bug with the dentry hash calculation: calculate the hash for the dentry we were given, not its parent. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26 18:30:55 +00:00
hash = ceph_dentry_hash(dir, req->r_dentry);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
is_hash = true;
}
}
ceph: direct requests in snapped namespace based on nonsnap parent When making a request in the virtual snapdir or a snapped portion of the namespace, we should choose the MDS based on the first nonsnap parent (and its caps). If that is not the best place, we will get forward hints to find the right MDS in the cluster. This fixes ESTALE errors when using the .snap directory and namespace with multiple MDSs. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-16 16:21:27 +00:00
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
dout("__choose_mds %p is_hash=%d (%d) mode %d\n", inode, (int)is_hash,
(int)hash, mode);
if (!inode)
goto random;
ci = ceph_inode(inode);
if (is_hash && S_ISDIR(inode->i_mode)) {
struct ceph_inode_frag frag;
int found;
ceph_choose_frag(ci, hash, &frag, &found);
if (found) {
if (mode == USE_ANY_MDS && frag.ndist > 0) {
u8 r;
/* choose a random replica */
get_random_bytes(&r, 1);
r %= frag.ndist;
mds = frag.dist[r];
dout("choose_mds %p %llx.%llx "
"frag %u mds%d (%d/%d)\n",
inode, ceph_vinop(inode),
ceph: avoid picking MDS that is not active Ignore replication or auth frag data if it indicates an MDS that is not active. This can happen if the MDS shuts down and the client has stale data about the namespace distribution across the MDS cluster. If that's the case, fall back to directing the request based on the auth cap (which should always be accurate). Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-22 05:16:46 +00:00
frag.frag, mds,
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
(int)r, frag.ndist);
ceph: avoid picking MDS that is not active Ignore replication or auth frag data if it indicates an MDS that is not active. This can happen if the MDS shuts down and the client has stale data about the namespace distribution across the MDS cluster. If that's the case, fall back to directing the request based on the auth cap (which should always be accurate). Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-22 05:16:46 +00:00
if (ceph_mdsmap_get_state(mdsc->mdsmap, mds) >=
CEPH_MDS_STATE_ACTIVE)
return mds;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
/* since this file/dir wasn't known to be
* replicated, then we want to look for the
* authoritative mds. */
mode = USE_AUTH_MDS;
if (frag.mds >= 0) {
/* choose auth mds */
mds = frag.mds;
dout("choose_mds %p %llx.%llx "
"frag %u mds%d (auth)\n",
inode, ceph_vinop(inode), frag.frag, mds);
ceph: avoid picking MDS that is not active Ignore replication or auth frag data if it indicates an MDS that is not active. This can happen if the MDS shuts down and the client has stale data about the namespace distribution across the MDS cluster. If that's the case, fall back to directing the request based on the auth cap (which should always be accurate). Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-22 05:16:46 +00:00
if (ceph_mdsmap_get_state(mdsc->mdsmap, mds) >=
CEPH_MDS_STATE_ACTIVE)
return mds;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
}
}
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-30 17:47:09 +00:00
spin_lock(&ci->i_ceph_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
cap = NULL;
if (mode == USE_AUTH_MDS)
cap = ci->i_auth_cap;
if (!cap && !RB_EMPTY_ROOT(&ci->i_caps))
cap = rb_entry(rb_first(&ci->i_caps), struct ceph_cap, ci_node);
if (!cap) {
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-30 17:47:09 +00:00
spin_unlock(&ci->i_ceph_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
goto random;
}
mds = cap->session->s_mds;
dout("choose_mds %p %llx.%llx mds%d (%scap %p)\n",
inode, ceph_vinop(inode), mds,
cap == ci->i_auth_cap ? "auth " : "", cap);
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-30 17:47:09 +00:00
spin_unlock(&ci->i_ceph_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
return mds;
random:
mds = ceph_mdsmap_get_random_mds(mdsc->mdsmap);
dout("choose_mds chose random mds%d\n", mds);
return mds;
}
/*
* session messages
*/
static struct ceph_msg *create_session_msg(u32 op, u64 seq)
{
struct ceph_msg *msg;
struct ceph_mds_session_head *h;
libceph: don't complain on msgpool alloc failures The pool allocation failures are masked by the pool; there is no need to spam the console about them. (That's the whole point of having the pool in the first place.) Mark msg allocations whose failure is safely handled as such. Signed-off-by: Sage Weil <sage@newdream.net>
2011-08-09 22:03:46 +00:00
msg = ceph_msg_new(CEPH_MSG_CLIENT_SESSION, sizeof(*h), GFP_NOFS,
false);
ceph: make ceph_msg_new return NULL on failure; clean up, fix callers Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure instead, and fix up the callers (about half of which were wrong anyway). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-01 23:06:19 +00:00
if (!msg) {
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
pr_err("create_session_msg ENOMEM creating msg\n");
ceph: make ceph_msg_new return NULL on failure; clean up, fix callers Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure instead, and fix up the callers (about half of which were wrong anyway). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-01 23:06:19 +00:00
return NULL;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
h = msg->front.iov_base;
h->op = cpu_to_le32(op);
h->seq = cpu_to_le64(seq);
return msg;
}
/*
* send session open request.
*
* called under mdsc->mutex
*/
static int __open_session(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session)
{
struct ceph_msg *msg;
int mstate;
int mds = session->s_mds;
/* wait for mds to go active? */
mstate = ceph_mdsmap_get_state(mdsc->mdsmap, mds);
dout("open_session to mds%d (%s)\n", mds,
ceph_mds_state_name(mstate));
session->s_state = CEPH_MDS_SESSION_OPENING;
session->s_renew_requested = jiffies;
/* send connect message */
msg = create_session_msg(CEPH_SESSION_REQUEST_OPEN, session->s_seq);
ceph: make ceph_msg_new return NULL on failure; clean up, fix callers Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure instead, and fix up the callers (about half of which were wrong anyway). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-01 23:06:19 +00:00
if (!msg)
return -ENOMEM;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph_con_send(&session->s_con, msg);
return 0;
}
ceph: introduce helper to connect to mds export targets There are a few cases where we need to open sessions with a given mds's potential export targets. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-21 20:38:25 +00:00
/*
* open sessions for any export targets for the given mds
*
* called under mdsc->mutex
*/
static void __open_export_target_sessions(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session)
{
struct ceph_mds_info *mi;
struct ceph_mds_session *ts;
int i, mds = session->s_mds;
int target;
if (mds >= mdsc->mdsmap->m_max_mds)
return;
mi = &mdsc->mdsmap->m_info[mds];
dout("open_export_target_sessions for mds%d (%d targets)\n",
session->s_mds, mi->num_export_targets);
for (i = 0; i < mi->num_export_targets; i++) {
target = mi->export_targets[i];
ts = __ceph_lookup_mds_session(mdsc, target);
if (!ts) {
ts = register_session(mdsc, target);
if (IS_ERR(ts))
return;
}
if (session->s_state == CEPH_MDS_SESSION_NEW ||
session->s_state == CEPH_MDS_SESSION_CLOSING)
__open_session(mdsc, session);
else
dout(" mds%d target mds%d %p is %s\n", session->s_mds,
i, ts, session_state_name(ts->s_state));
ceph_put_mds_session(ts);
}
}
ceph: connect to export targets on cap export When we get a cap EXPORT message, make sure we are connected to all export targets to ensure we can handle the matching IMPORT. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-21 20:45:04 +00:00
void ceph_mdsc_open_export_target_sessions(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session)
{
mutex_lock(&mdsc->mutex);
__open_export_target_sessions(mdsc, session);
mutex_unlock(&mdsc->mutex);
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
/*
* session caps
*/
/*
* Free preallocated cap messages assigned to this session
*/
static void cleanup_cap_releases(struct ceph_mds_session *session)
{
struct ceph_msg *msg;
spin_lock(&session->s_cap_lock);
while (!list_empty(&session->s_cap_releases)) {
msg = list_first_entry(&session->s_cap_releases,
struct ceph_msg, list_head);
list_del_init(&msg->list_head);
ceph_msg_put(msg);
}
while (!list_empty(&session->s_cap_releases_done)) {
msg = list_first_entry(&session->s_cap_releases_done,
struct ceph_msg, list_head);
list_del_init(&msg->list_head);
ceph_msg_put(msg);
}
spin_unlock(&session->s_cap_lock);
}
/*
ceph: fix cap removal races The iterate_session_caps helper traverses the session caps list and tries to grab an inode reference. However, the __ceph_remove_cap was clearing the inode backpointer _before_ removing itself from the session list, causing a null pointer dereference. Clear cap->ci under protection of s_cap_lock to avoid the race, and to tightly couple the list and backpointer state. Use a local flag to indicate whether we are releasing the cap, as cap->session may be modified by a racing thread in iterate_session_caps. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-12 03:56:31 +00:00
* Helper to safely iterate over all caps associated with a session, with
* special care taken to handle a racing __ceph_remove_cap().
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
*
ceph: fix cap removal races The iterate_session_caps helper traverses the session caps list and tries to grab an inode reference. However, the __ceph_remove_cap was clearing the inode backpointer _before_ removing itself from the session list, causing a null pointer dereference. Clear cap->ci under protection of s_cap_lock to avoid the race, and to tightly couple the list and backpointer state. Use a local flag to indicate whether we are releasing the cap, as cap->session may be modified by a racing thread in iterate_session_caps. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-12 03:56:31 +00:00
* Caller must hold session s_mutex.
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
*/
static int iterate_session_caps(struct ceph_mds_session *session,
int (*cb)(struct inode *, struct ceph_cap *,
void *), void *arg)
{
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 19:39:45 +00:00
struct list_head *p;
struct ceph_cap *cap;
struct inode *inode, *last_inode = NULL;
struct ceph_cap *old_cap = NULL;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
int ret;
dout("iterate_session_caps %p mds%d\n", session, session->s_mds);
spin_lock(&session->s_cap_lock);
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 19:39:45 +00:00
p = session->s_caps.next;
while (p != &session->s_caps) {
cap = list_entry(p, struct ceph_cap, session_caps);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
inode = igrab(&cap->ci->vfs_inode);
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 19:39:45 +00:00
if (!inode) {
p = p->next;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
continue;
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 19:39:45 +00:00
}
session->s_cap_iterator = cap;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
spin_unlock(&session->s_cap_lock);
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 19:39:45 +00:00
if (last_inode) {
iput(last_inode);
last_inode = NULL;
}
if (old_cap) {
ceph: do caps accounting per mds_client Caps related accounting is now being done per mds client instead of just being global. This prepares ground work for a later revision of the caps preallocated reservation list. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-17 23:16:12 +00:00
ceph_put_cap(session->s_mdsc, old_cap);
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 19:39:45 +00:00
old_cap = NULL;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ret = cb(inode, cap, arg);
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 19:39:45 +00:00
last_inode = inode;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
spin_lock(&session->s_cap_lock);
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 19:39:45 +00:00
p = p->next;
if (cap->ci == NULL) {
dout("iterate_session_caps finishing cap %p removal\n",
cap);
BUG_ON(cap->session != session);
list_del_init(&cap->session_caps);
session->s_nr_caps--;
cap->session = NULL;
old_cap = cap; /* put_cap it w/o locks held */
}
ceph: do not touch_caps while iterating over caps list Avoid confusing iterate_session_caps(), flag the session while we are iterating so that __touch_cap does not rearrange items on the list. All other modifiers of session->s_caps do so under the protection of s_mutex. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-22 04:40:34 +00:00
if (ret < 0)
goto out;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
ceph: do not touch_caps while iterating over caps list Avoid confusing iterate_session_caps(), flag the session while we are iterating so that __touch_cap does not rearrange items on the list. All other modifiers of session->s_caps do so under the protection of s_mutex. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-22 04:40:34 +00:00
ret = 0;
out:
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 19:39:45 +00:00
session->s_cap_iterator = NULL;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
spin_unlock(&session->s_cap_lock);
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 19:39:45 +00:00
if (last_inode)
iput(last_inode);
if (old_cap)
ceph: do caps accounting per mds_client Caps related accounting is now being done per mds client instead of just being global. This prepares ground work for a later revision of the caps preallocated reservation list. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-17 23:16:12 +00:00
ceph_put_cap(session->s_mdsc, old_cap);
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 19:39:45 +00:00
ceph: do not touch_caps while iterating over caps list Avoid confusing iterate_session_caps(), flag the session while we are iterating so that __touch_cap does not rearrange items on the list. All other modifiers of session->s_caps do so under the protection of s_mutex. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-22 04:40:34 +00:00
return ret;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
static int remove_session_caps_cb(struct inode *inode, struct ceph_cap *cap,
ceph: throw out dirty caps metadata, data on session teardown The remove_session_caps() helper is called when an MDS closes out our session (either normally, or as a result of a failed reconnect), and when we tear down state for umount. If we remove the last cap, and there are no cap migrations in progress, then there is little hope of us flushing out that data to the mds (without heroic efforts to reconnect and flush). So, to avoid leaving inodes pinned (due to dirty state) and crashing after umount, throw out dirty caps state and unpin the inodes. Print a warning to the console so we know something was lost. NOTE: Although we drop wrbuffer refs, we don't actually mark pages clean; maybe a truncate should be queued? Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-10 23:12:25 +00:00
void *arg)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
{
struct ceph_inode_info *ci = ceph_inode(inode);
ceph: throw out dirty caps metadata, data on session teardown The remove_session_caps() helper is called when an MDS closes out our session (either normally, or as a result of a failed reconnect), and when we tear down state for umount. If we remove the last cap, and there are no cap migrations in progress, then there is little hope of us flushing out that data to the mds (without heroic efforts to reconnect and flush). So, to avoid leaving inodes pinned (due to dirty state) and crashing after umount, throw out dirty caps state and unpin the inodes. Print a warning to the console so we know something was lost. NOTE: Although we drop wrbuffer refs, we don't actually mark pages clean; maybe a truncate should be queued? Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-10 23:12:25 +00:00
int drop = 0;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
dout("removing cap %p, ci is %p, inode is %p\n",
cap, ci, &ci->vfs_inode);
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-30 17:47:09 +00:00
spin_lock(&ci->i_ceph_lock);
ceph: throw out dirty caps metadata, data on session teardown The remove_session_caps() helper is called when an MDS closes out our session (either normally, or as a result of a failed reconnect), and when we tear down state for umount. If we remove the last cap, and there are no cap migrations in progress, then there is little hope of us flushing out that data to the mds (without heroic efforts to reconnect and flush). So, to avoid leaving inodes pinned (due to dirty state) and crashing after umount, throw out dirty caps state and unpin the inodes. Print a warning to the console so we know something was lost. NOTE: Although we drop wrbuffer refs, we don't actually mark pages clean; maybe a truncate should be queued? Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-10 23:12:25 +00:00
__ceph_remove_cap(cap);
if (!__ceph_is_any_real_caps(ci)) {
struct ceph_mds_client *mdsc =
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
ceph_sb_to_client(inode->i_sb)->mdsc;
ceph: throw out dirty caps metadata, data on session teardown The remove_session_caps() helper is called when an MDS closes out our session (either normally, or as a result of a failed reconnect), and when we tear down state for umount. If we remove the last cap, and there are no cap migrations in progress, then there is little hope of us flushing out that data to the mds (without heroic efforts to reconnect and flush). So, to avoid leaving inodes pinned (due to dirty state) and crashing after umount, throw out dirty caps state and unpin the inodes. Print a warning to the console so we know something was lost. NOTE: Although we drop wrbuffer refs, we don't actually mark pages clean; maybe a truncate should be queued? Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-10 23:12:25 +00:00
spin_lock(&mdsc->cap_dirty_lock);
if (!list_empty(&ci->i_dirty_item)) {
pr_info(" dropping dirty %s state for %p %lld\n",
ceph_cap_string(ci->i_dirty_caps),
inode, ceph_ino(inode));
ci->i_dirty_caps = 0;
list_del_init(&ci->i_dirty_item);
drop = 1;
}
if (!list_empty(&ci->i_flushing_item)) {
pr_info(" dropping dirty+flushing %s state for %p %lld\n",
ceph_cap_string(ci->i_flushing_caps),
inode, ceph_ino(inode));
ci->i_flushing_caps = 0;
list_del_init(&ci->i_flushing_item);
mdsc->num_cap_flushing--;
drop = 1;
}
if (drop && ci->i_wrbuffer_ref) {
pr_info(" dropping dirty data for %p %lld\n",
inode, ceph_ino(inode));
ci->i_wrbuffer_ref = 0;
ci->i_wrbuffer_ref_head = 0;
drop++;
}
spin_unlock(&mdsc->cap_dirty_lock);
}
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-30 17:47:09 +00:00
spin_unlock(&ci->i_ceph_lock);
ceph: throw out dirty caps metadata, data on session teardown The remove_session_caps() helper is called when an MDS closes out our session (either normally, or as a result of a failed reconnect), and when we tear down state for umount. If we remove the last cap, and there are no cap migrations in progress, then there is little hope of us flushing out that data to the mds (without heroic efforts to reconnect and flush). So, to avoid leaving inodes pinned (due to dirty state) and crashing after umount, throw out dirty caps state and unpin the inodes. Print a warning to the console so we know something was lost. NOTE: Although we drop wrbuffer refs, we don't actually mark pages clean; maybe a truncate should be queued? Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-10 23:12:25 +00:00
while (drop--)
iput(inode);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
return 0;
}
/*
* caller must hold session s_mutex
*/
static void remove_session_caps(struct ceph_mds_session *session)
{
dout("remove_session_caps on %p\n", session);
iterate_session_caps(session, remove_session_caps_cb, NULL);
BUG_ON(session->s_nr_caps > 0);
ceph: throw out dirty caps metadata, data on session teardown The remove_session_caps() helper is called when an MDS closes out our session (either normally, or as a result of a failed reconnect), and when we tear down state for umount. If we remove the last cap, and there are no cap migrations in progress, then there is little hope of us flushing out that data to the mds (without heroic efforts to reconnect and flush). So, to avoid leaving inodes pinned (due to dirty state) and crashing after umount, throw out dirty caps state and unpin the inodes. Print a warning to the console so we know something was lost. NOTE: Although we drop wrbuffer refs, we don't actually mark pages clean; maybe a truncate should be queued? Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-10 23:12:25 +00:00
BUG_ON(!list_empty(&session->s_cap_flushing));
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
cleanup_cap_releases(session);
}
/*
* wake up any threads waiting on this session's caps. if the cap is
* old (didn't get renewed on the client reconnect), remove it now.
*
* caller must hold s_mutex.
*/
static int wake_up_session_cb(struct inode *inode, struct ceph_cap *cap,
void *arg)
{
ceph: reset requested max_size after mds reconnect The max_size increase request to the MDS can get lost during an MDS restart and reconnect. Reset our requested value after the MDS recovers, so that any blocked writes will re-request a larger max_size upon waking. Also, explicit wake session caps after the reconnect. Normally the cap renewal catches this, but not in the cases where the caps didn't go stale in the first place, which would leave writers waiting on max_size asleep. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-20 21:43:45 +00:00
struct ceph_inode_info *ci = ceph_inode(inode);
ceph: use complete_all and wake_up_all This fixes an issue triggered by running concurrent syncs. One of the syncs would go through while the other would just hang indefinitely. In any case, we never actually want to wake a single waiter, so the *_all functions should be used. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-27 20:11:08 +00:00
wake_up_all(&ci->i_cap_wq);
ceph: reset requested max_size after mds reconnect The max_size increase request to the MDS can get lost during an MDS restart and reconnect. Reset our requested value after the MDS recovers, so that any blocked writes will re-request a larger max_size upon waking. Also, explicit wake session caps after the reconnect. Normally the cap renewal catches this, but not in the cases where the caps didn't go stale in the first place, which would leave writers waiting on max_size asleep. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-20 21:43:45 +00:00
if (arg) {
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-30 17:47:09 +00:00
spin_lock(&ci->i_ceph_lock);
ceph: reset requested max_size after mds reconnect The max_size increase request to the MDS can get lost during an MDS restart and reconnect. Reset our requested value after the MDS recovers, so that any blocked writes will re-request a larger max_size upon waking. Also, explicit wake session caps after the reconnect. Normally the cap renewal catches this, but not in the cases where the caps didn't go stale in the first place, which would leave writers waiting on max_size asleep. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-20 21:43:45 +00:00
ci->i_wanted_max_size = 0;
ci->i_requested_max_size = 0;
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-30 17:47:09 +00:00
spin_unlock(&ci->i_ceph_lock);
ceph: reset requested max_size after mds reconnect The max_size increase request to the MDS can get lost during an MDS restart and reconnect. Reset our requested value after the MDS recovers, so that any blocked writes will re-request a larger max_size upon waking. Also, explicit wake session caps after the reconnect. Normally the cap renewal catches this, but not in the cases where the caps didn't go stale in the first place, which would leave writers waiting on max_size asleep. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-20 21:43:45 +00:00
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
return 0;
}
ceph: reset requested max_size after mds reconnect The max_size increase request to the MDS can get lost during an MDS restart and reconnect. Reset our requested value after the MDS recovers, so that any blocked writes will re-request a larger max_size upon waking. Also, explicit wake session caps after the reconnect. Normally the cap renewal catches this, but not in the cases where the caps didn't go stale in the first place, which would leave writers waiting on max_size asleep. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-20 21:43:45 +00:00
static void wake_up_session_caps(struct ceph_mds_session *session,
int reconnect)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
{
dout("wake_up_session_caps %p mds%d\n", session, session->s_mds);
ceph: reset requested max_size after mds reconnect The max_size increase request to the MDS can get lost during an MDS restart and reconnect. Reset our requested value after the MDS recovers, so that any blocked writes will re-request a larger max_size upon waking. Also, explicit wake session caps after the reconnect. Normally the cap renewal catches this, but not in the cases where the caps didn't go stale in the first place, which would leave writers waiting on max_size asleep. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-20 21:43:45 +00:00
iterate_session_caps(session, wake_up_session_cb,
(void *)(unsigned long)reconnect);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
/*
* Send periodic message to MDS renewing all currently held caps. The
* ack will reset the expiration for all caps from this session.
*
* caller holds s_mutex
*/
static int send_renew_caps(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session)
{
struct ceph_msg *msg;
int state;
if (time_after_eq(jiffies, session->s_cap_ttl) &&
time_after_eq(session->s_cap_ttl, session->s_renew_requested))
pr_info("mds%d caps stale\n", session->s_mds);
ceph: prevent dup stale messages to console for restarting mds Prevent duplicate 'mds0 caps stale' message from spamming the console every few seconds while the MDS restarts. Set s_renew_requested earlier, so that we only print the message once, even if we don't send an actual request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-18 20:43:09 +00:00
session->s_renew_requested = jiffies;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
/* do not try to renew caps until a recovering mds has reconnected
* with its clients. */
state = ceph_mdsmap_get_state(mdsc->mdsmap, session->s_mds);
if (state < CEPH_MDS_STATE_RECONNECT) {
dout("send_renew_caps ignoring mds%d (%s)\n",
session->s_mds, ceph_mds_state_name(state));
return 0;
}
dout("send_renew_caps to mds%d (%s)\n", session->s_mds,
ceph_mds_state_name(state));
msg = create_session_msg(CEPH_SESSION_REQUEST_RENEWCAPS,
++session->s_renew_seq);
ceph: make ceph_msg_new return NULL on failure; clean up, fix callers Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure instead, and fix up the callers (about half of which were wrong anyway). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-01 23:06:19 +00:00
if (!msg)
return -ENOMEM;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph_con_send(&session->s_con, msg);
return 0;
}
/*
* Note new cap ttl, and any transition from stale -> not stale (fresh?).
ceph: reset requested max_size after mds reconnect The max_size increase request to the MDS can get lost during an MDS restart and reconnect. Reset our requested value after the MDS recovers, so that any blocked writes will re-request a larger max_size upon waking. Also, explicit wake session caps after the reconnect. Normally the cap renewal catches this, but not in the cases where the caps didn't go stale in the first place, which would leave writers waiting on max_size asleep. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-20 21:43:45 +00:00
*
* Called under session->s_mutex
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
*/
static void renewed_caps(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session, int is_renew)
{
int was_stale;
int wake = 0;
spin_lock(&session->s_cap_lock);
ceph: don't reset s_cap_ttl to zero Avoid the need to check for a special zero s_cap_ttl value by just using (jiffies - 1) as the value assigned to indicate "sometime in the past." Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
2012-01-13 01:48:11 +00:00
was_stale = is_renew && time_after_eq(jiffies, session->s_cap_ttl);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
session->s_cap_ttl = session->s_renew_requested +
mdsc->mdsmap->m_session_timeout*HZ;
if (was_stale) {
if (time_before(jiffies, session->s_cap_ttl)) {
pr_info("mds%d caps renewed\n", session->s_mds);
wake = 1;
} else {
pr_info("mds%d caps still stale\n", session->s_mds);
}
}
dout("renewed_caps mds%d ttl now %lu, was %s, now %s\n",
session->s_mds, session->s_cap_ttl, was_stale ? "stale" : "fresh",
time_before(jiffies, session->s_cap_ttl) ? "stale" : "fresh");
spin_unlock(&session->s_cap_lock);
if (wake)
ceph: reset requested max_size after mds reconnect The max_size increase request to the MDS can get lost during an MDS restart and reconnect. Reset our requested value after the MDS recovers, so that any blocked writes will re-request a larger max_size upon waking. Also, explicit wake session caps after the reconnect. Normally the cap renewal catches this, but not in the cases where the caps didn't go stale in the first place, which would leave writers waiting on max_size asleep. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-20 21:43:45 +00:00
wake_up_session_caps(session, 0);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
/*
* send a session close request
*/
static int request_close_session(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session)
{
struct ceph_msg *msg;
dout("request_close_session mds%d state %s seq %lld\n",
session->s_mds, session_state_name(session->s_state),
session->s_seq);
msg = create_session_msg(CEPH_SESSION_REQUEST_CLOSE, session->s_seq);
ceph: make ceph_msg_new return NULL on failure; clean up, fix callers Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure instead, and fix up the callers (about half of which were wrong anyway). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-01 23:06:19 +00:00
if (!msg)
return -ENOMEM;
ceph_con_send(&session->s_con, msg);
return 0;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
/*
* Called with s_mutex held.
*/
static int __close_session(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session)
{
if (session->s_state >= CEPH_MDS_SESSION_CLOSING)
return 0;
session->s_state = CEPH_MDS_SESSION_CLOSING;
return request_close_session(mdsc, session);
}
/*
* Trim old(er) caps.
*
* Because we can't cache an inode without one or more caps, we do
* this indirectly: if a cap is unused, we prune its aliases, at which
* point the inode will hopefully get dropped to.
*
* Yes, this is a bit sloppy. Our only real goal here is to respond to
* memory pressure from the MDS, though, so it needn't be perfect.
*/
static int trim_caps_cb(struct inode *inode, struct ceph_cap *cap, void *arg)
{
struct ceph_mds_session *session = arg;
struct ceph_inode_info *ci = ceph_inode(inode);
int used, oissued, mine;
if (session->s_trim_caps <= 0)
return -1;
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-30 17:47:09 +00:00
spin_lock(&ci->i_ceph_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
mine = cap->issued | cap->implemented;
used = __ceph_caps_used(ci);
oissued = __ceph_caps_issued_other(ci, cap);
dout("trim_caps_cb %p cap %p mine %s oissued %s used %s\n",
inode, cap, ceph_cap_string(mine), ceph_cap_string(oissued),
ceph_cap_string(used));
if (ci->i_dirty_caps)
goto out; /* dirty caps */
if ((used & ~oissued) & mine)
goto out; /* we need these caps */
session->s_trim_caps--;
if (oissued) {
/* we aren't the only cap.. just remove us */
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 19:39:45 +00:00
__ceph_remove_cap(cap);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
} else {
/* try to drop referring dentries */
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-30 17:47:09 +00:00
spin_unlock(&ci->i_ceph_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
d_prune_aliases(inode);
dout("trim_caps_cb %p cap %p pruned, count now %d\n",
inode, cap, atomic_read(&inode->i_count));
return 0;
}
out:
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-30 17:47:09 +00:00
spin_unlock(&ci->i_ceph_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
return 0;
}
/*
* Trim session cap count down to some max number.
*/
static int trim_caps(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session,
int max_caps)
{
int trim_caps = session->s_nr_caps - max_caps;
dout("trim_caps mds%d start: %d / %d, trim %d\n",
session->s_mds, session->s_nr_caps, max_caps, trim_caps);
if (trim_caps > 0) {
session->s_trim_caps = trim_caps;
iterate_session_caps(session, trim_caps_cb, session);
dout("trim_caps mds%d done: %d / %d, trimmed %d\n",
session->s_mds, session->s_nr_caps, max_caps,
trim_caps - session->s_trim_caps);
ceph: do not touch_caps while iterating over caps list Avoid confusing iterate_session_caps(), flag the session while we are iterating so that __touch_cap does not rearrange items on the list. All other modifiers of session->s_caps do so under the protection of s_mutex. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-22 04:40:34 +00:00
session->s_trim_caps = 0;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
return 0;
}
/*
* Allocate cap_release messages. If there is a partially full message
* in the queue, try to allocate enough to cover it's remainder, so that
* we can send it immediately.
*
* Called under s_mutex.
*/
ceph: try to send partial cap release on cap message on missing inode If we have enough memory to allocate a new cap release message, do so, so that we can send a partial release message immediately. This keeps us from making the MDS wait when the cap release it needs is in a partially full release message. If we fail because of ENOMEM, oh well, they'll just have to wait a bit longer. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-09 23:52:04 +00:00
int ceph_add_cap_releases(struct ceph_mds_client *mdsc,
ceph: drop unused argument Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-10 19:55:52 +00:00
struct ceph_mds_session *session)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
{
ceph: simplify add_cap_releases No functional change, aside from more useful debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-10 19:57:11 +00:00
struct ceph_msg *msg, *partial = NULL;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
struct ceph_mds_cap_release *head;
int err = -ENOMEM;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
int extra = mdsc->fsc->mount_options->cap_release_safety;
ceph: simplify add_cap_releases No functional change, aside from more useful debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-10 19:57:11 +00:00
int num;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph: simplify add_cap_releases No functional change, aside from more useful debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-10 19:57:11 +00:00
dout("add_cap_releases %p mds%d extra %d\n", session, session->s_mds,
extra);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
spin_lock(&session->s_cap_lock);
if (!list_empty(&session->s_cap_releases)) {
msg = list_first_entry(&session->s_cap_releases,
struct ceph_msg,
list_head);
head = msg->front.iov_base;
ceph: simplify add_cap_releases No functional change, aside from more useful debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-10 19:57:11 +00:00
num = le32_to_cpu(head->num);
if (num) {
dout(" partial %p with (%d/%d)\n", msg, num,
(int)CEPH_CAPS_PER_RELEASE);
extra += CEPH_CAPS_PER_RELEASE - num;
partial = msg;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
while (session->s_num_cap_releases < session->s_nr_caps + extra) {
spin_unlock(&session->s_cap_lock);
ceph: all allocation functions should get gfp_mask This is essential, as for the rados block device we'll need to run in different contexts that would need flags that are other than GFP_NOFS. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 21:33:58 +00:00
msg = ceph_msg_new(CEPH_MSG_CLIENT_CAPRELEASE, PAGE_CACHE_SIZE,
libceph: don't complain on msgpool alloc failures The pool allocation failures are masked by the pool; there is no need to spam the console about them. (That's the whole point of having the pool in the first place.) Mark msg allocations whose failure is safely handled as such. Signed-off-by: Sage Weil <sage@newdream.net>
2011-08-09 22:03:46 +00:00
GFP_NOFS, false);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
if (!msg)
goto out_unlocked;
dout("add_cap_releases %p msg %p now %d\n", session, msg,
(int)msg->front.iov_len);
head = msg->front.iov_base;
head->num = cpu_to_le32(0);
msg->front.iov_len = sizeof(*head);
spin_lock(&session->s_cap_lock);
list_add(&msg->list_head, &session->s_cap_releases);
session->s_num_cap_releases += CEPH_CAPS_PER_RELEASE;
}
ceph: simplify add_cap_releases No functional change, aside from more useful debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-10 19:57:11 +00:00
if (partial) {
head = partial->front.iov_base;
num = le32_to_cpu(head->num);
dout(" queueing partial %p with %d/%d\n", partial, num,
(int)CEPH_CAPS_PER_RELEASE);
list_move_tail(&partial->list_head,
&session->s_cap_releases_done);
session->s_num_cap_releases -= CEPH_CAPS_PER_RELEASE - num;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
err = 0;
spin_unlock(&session->s_cap_lock);
out_unlocked:
return err;
}
/*
* flush all dirty inode data to disk.
*
* returns true if we've flushed through want_flush_seq
*/
static int check_cap_flush(struct ceph_mds_client *mdsc, u64 want_flush_seq)
{
int mds, ret = 1;
dout("check_cap_flush want %lld\n", want_flush_seq);
mutex_lock(&mdsc->mutex);
for (mds = 0; ret && mds < mdsc->max_sessions; mds++) {
struct ceph_mds_session *session = mdsc->sessions[mds];
if (!session)
continue;
get_session(session);
mutex_unlock(&mdsc->mutex);
mutex_lock(&session->s_mutex);
if (!list_empty(&session->s_cap_flushing)) {
struct ceph_inode_info *ci =
list_entry(session->s_cap_flushing.next,
struct ceph_inode_info,
i_flushing_item);
struct inode *inode = &ci->vfs_inode;
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-30 17:47:09 +00:00
spin_lock(&ci->i_ceph_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
if (ci->i_cap_flush_seq <= want_flush_seq) {
dout("check_cap_flush still flushing %p "
"seq %lld <= %lld to mds%d\n", inode,
ci->i_cap_flush_seq, want_flush_seq,
session->s_mds);
ret = 0;
}
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-30 17:47:09 +00:00
spin_unlock(&ci->i_ceph_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
mutex_unlock(&session->s_mutex);
ceph_put_mds_session(session);
if (!ret)
return ret;
mutex_lock(&mdsc->mutex);
}
mutex_unlock(&mdsc->mutex);
dout("check_cap_flush ok, flushed thru %lld\n", want_flush_seq);
return ret;
}
/*
* called under s_mutex
*/
ceph: release cap on import if we don't have the inode If we get an IMPORT that give us a cap, but we don't have the inode, queue a release (and try to send it immediately) so that the MDS doesn't get stuck waiting for us. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-09 23:47:10 +00:00
void ceph_send_cap_releases(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
{
struct ceph_msg *msg;
dout("send_cap_releases mds%d\n", session->s_mds);
ceph: clean up cap release loop vs spinlock Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-05 22:51:35 +00:00
spin_lock(&session->s_cap_lock);
while (!list_empty(&session->s_cap_releases_done)) {
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
msg = list_first_entry(&session->s_cap_releases_done,
struct ceph_msg, list_head);
list_del_init(&msg->list_head);
spin_unlock(&session->s_cap_lock);
msg->hdr.front_len = cpu_to_le32(msg->front.iov_len);
dout("send_cap_releases mds%d %p\n", session->s_mds, msg);
ceph_con_send(&session->s_con, msg);
ceph: clean up cap release loop vs spinlock Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-05 22:51:35 +00:00
spin_lock(&session->s_cap_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
spin_unlock(&session->s_cap_lock);
}
ceph: dicard cap releases on mds restart If the MDS restarts, the expire caps state is no longer shared, and can be thrown out. Caps state will be rebuilt on the MDS during the reconnect process that follows. Zero out any release messages and adjust the release counter accordingly. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-10 22:36:44 +00:00
static void discard_cap_releases(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session)
{
struct ceph_msg *msg;
struct ceph_mds_cap_release *head;
unsigned num;
dout("discard_cap_releases mds%d\n", session->s_mds);
spin_lock(&session->s_cap_lock);
/* zero out the in-progress message */
msg = list_first_entry(&session->s_cap_releases,
struct ceph_msg, list_head);
head = msg->front.iov_base;
num = le32_to_cpu(head->num);
dout("discard_cap_releases mds%d %p %u\n", session->s_mds, msg, num);
head->num = cpu_to_le32(0);
session->s_num_cap_releases += num;
/* requeue completed messages */
while (!list_empty(&session->s_cap_releases_done)) {
msg = list_first_entry(&session->s_cap_releases_done,
struct ceph_msg, list_head);
list_del_init(&msg->list_head);
head = msg->front.iov_base;
num = le32_to_cpu(head->num);
dout("discard_cap_releases mds%d %p %u\n", session->s_mds, msg,
num);
session->s_num_cap_releases += num;
head->num = cpu_to_le32(0);
msg->front.iov_len = sizeof(*head);
list_add(&msg->list_head, &session->s_cap_releases);
}
spin_unlock(&session->s_cap_lock);
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
/*
* requests
*/
/*
* Create an mds request.
*/
struct ceph_mds_request *
ceph_mdsc_create_request(struct ceph_mds_client *mdsc, int op, int mode)
{
struct ceph_mds_request *req = kzalloc(sizeof(*req), GFP_NOFS);
if (!req)
return ERR_PTR(-ENOMEM);
ceph: fix race between aborted requests and fill_trace When we abort requests we need to prevent fill_trace et al from doing anything that relies on locks held by the VFS caller. This fixes a race between the reply handler and the abort code, ensuring that continue holding the dir mutex until the reply handler completes. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 19:01:13 +00:00
mutex_init(&req->r_fill_mutex);
ceph: do caps accounting per mds_client Caps related accounting is now being done per mds client instead of just being global. This prepares ground work for a later revision of the caps preallocated reservation list. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-17 23:16:12 +00:00
req->r_mdsc = mdsc;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
req->r_started = jiffies;
req->r_resend_mds = -1;
INIT_LIST_HEAD(&req->r_unsafe_dir_item);
req->r_fmode = -1;
ceph: use kref for struct ceph_mds_request Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-07 20:31:09 +00:00
kref_init(&req->r_kref);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
INIT_LIST_HEAD(&req->r_wait);
init_completion(&req->r_completion);
init_completion(&req->r_safe_completion);
INIT_LIST_HEAD(&req->r_unsafe_item);
req->r_op = op;
req->r_direct_mode = mode;
return req;
}
/*
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-15 20:08:46 +00:00
* return oldest (lowest) request, tid in request tree, 0 if none.
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
*
* called under mdsc->mutex.
*/
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-15 20:08:46 +00:00
static struct ceph_mds_request *__get_oldest_req(struct ceph_mds_client *mdsc)
{
if (RB_EMPTY_ROOT(&mdsc->request_tree))
return NULL;
return rb_entry(rb_first(&mdsc->request_tree),
struct ceph_mds_request, r_node);
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
static u64 __get_oldest_tid(struct ceph_mds_client *mdsc)
{
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-15 20:08:46 +00:00
struct ceph_mds_request *req = __get_oldest_req(mdsc);
if (req)
return req->r_tid;
return 0;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
/*
* Build a dentry's path. Allocate on heap; caller must kfree. Based
* on build_path_from_dentry in fs/cifs/dir.c.
*
* If @stop_on_nosnap, generate path relative to the first non-snapped
* inode.
*
* Encode hidden .snap dirs as a double /, i.e.
* foo/.snap/bar -> foo//bar
*/
char *ceph_mdsc_build_path(struct dentry *dentry, int *plen, u64 *base,
int stop_on_nosnap)
{
struct dentry *temp;
char *path;
int len, pos;
ceph analog of cifs build_path_from_dentry() race fix ... unfortunately, cifs bug got copied. Fix is essentially the same. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 03:43:58 +00:00
unsigned seq;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
if (dentry == NULL)
return ERR_PTR(-EINVAL);
retry:
len = 0;
ceph analog of cifs build_path_from_dentry() race fix ... unfortunately, cifs bug got copied. Fix is essentially the same. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 03:43:58 +00:00
seq = read_seqbegin(&rename_lock);
rcu_read_lock();
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
for (temp = dentry; !IS_ROOT(temp);) {
struct inode *inode = temp->d_inode;
if (inode && ceph_snap(inode) == CEPH_SNAPDIR)
len++; /* slash only */
else if (stop_on_nosnap && inode &&
ceph_snap(inode) == CEPH_NOSNAP)
break;
else
len += 1 + temp->d_name.len;
temp = temp->d_parent;
}
ceph analog of cifs build_path_from_dentry() race fix ... unfortunately, cifs bug got copied. Fix is essentially the same. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 03:43:58 +00:00
rcu_read_unlock();
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
if (len)
len--; /* no leading '/' */
path = kmalloc(len+1, GFP_NOFS);
if (path == NULL)
return ERR_PTR(-ENOMEM);
pos = len;
path[pos] = 0; /* trailing null */
ceph analog of cifs build_path_from_dentry() race fix ... unfortunately, cifs bug got copied. Fix is essentially the same. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 03:43:58 +00:00
rcu_read_lock();
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
for (temp = dentry; !IS_ROOT(temp) && pos != 0; ) {
ceph analog of cifs build_path_from_dentry() race fix ... unfortunately, cifs bug got copied. Fix is essentially the same. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 03:43:58 +00:00
struct inode *inode;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph analog of cifs build_path_from_dentry() race fix ... unfortunately, cifs bug got copied. Fix is essentially the same. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 03:43:58 +00:00
spin_lock(&temp->d_lock);
inode = temp->d_inode;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
if (inode && ceph_snap(inode) == CEPH_SNAPDIR) {
ceph: reduce build_path debug output Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-18 17:14:30 +00:00
dout("build_path path+%d: %p SNAPDIR\n",
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
pos, temp);
} else if (stop_on_nosnap && inode &&
ceph_snap(inode) == CEPH_NOSNAP) {
ceph: add missing spin_unlock at ceph_mdsc_build_path() one of the paths was missing spin_unlock Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2011-12-13 17:57:44 +00:00
spin_unlock(&temp->d_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
break;
} else {
pos -= temp->d_name.len;
ceph analog of cifs build_path_from_dentry() race fix ... unfortunately, cifs bug got copied. Fix is essentially the same. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 03:43:58 +00:00
if (pos < 0) {
spin_unlock(&temp->d_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
break;
ceph analog of cifs build_path_from_dentry() race fix ... unfortunately, cifs bug got copied. Fix is essentially the same. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 03:43:58 +00:00
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
strncpy(path + pos, temp->d_name.name,
temp->d_name.len);
}
ceph analog of cifs build_path_from_dentry() race fix ... unfortunately, cifs bug got copied. Fix is essentially the same. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 03:43:58 +00:00
spin_unlock(&temp->d_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
if (pos)
path[--pos] = '/';
temp = temp->d_parent;
}
ceph analog of cifs build_path_from_dentry() race fix ... unfortunately, cifs bug got copied. Fix is essentially the same. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 03:43:58 +00:00
rcu_read_unlock();
if (pos != 0 || read_seqretry(&rename_lock, seq)) {
ceph: reduce build_path debug output Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-18 17:14:30 +00:00
pr_err("build_path did not end path lookup where "
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
"expected, namelen is %d, pos is %d\n", len, pos);
/* presumably this is only possible if racing with a
rename of one of the parent directories (we can not
lock the dentries above us to prevent this, but
retrying should be harmless) */
kfree(path);
goto retry;
}
*base = ceph_ino(temp->d_inode);
*plen = len;
ceph: reduce build_path debug output Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-18 17:14:30 +00:00
dout("build_path on %p %d built %llx '%.*s'\n",
fs: dcache scale dentry refcount Make d_count non-atomic and protect it with d_lock. This allows us to ensure a 0 refcount dentry remains 0 without dcache_lock. It is also fairly natural when we start protecting many other dentry members with d_lock. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:32 +00:00
dentry, dentry->d_count, *base, len, path);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
return path;
}
static int build_dentry_path(struct dentry *dentry,
const char **ppath, int *ppathlen, u64 *pino,
int *pfreepath)
{
char *path;
if (ceph_snap(dentry->d_parent->d_inode) == CEPH_NOSNAP) {
*pino = ceph_ino(dentry->d_parent->d_inode);
*ppath = dentry->d_name.name;
*ppathlen = dentry->d_name.len;
return 0;
}
path = ceph_mdsc_build_path(dentry, ppathlen, pino, 1);
if (IS_ERR(path))
return PTR_ERR(path);
*ppath = path;
*pfreepath = 1;
return 0;
}
static int build_inode_path(struct inode *inode,
const char **ppath, int *ppathlen, u64 *pino,
int *pfreepath)
{
struct dentry *dentry;
char *path;
if (ceph_snap(inode) == CEPH_NOSNAP) {
*pino = ceph_ino(inode);
*ppathlen = 0;
return 0;
}
dentry = d_find_alias(inode);
path = ceph_mdsc_build_path(dentry, ppathlen, pino, 1);
dput(dentry);
if (IS_ERR(path))
return PTR_ERR(path);
*ppath = path;
*pfreepath = 1;
return 0;
}
/*
* request arguments may be specified via an inode *, a dentry *, or
* an explicit ino+path.
*/
static int set_request_path_attr(struct inode *rinode, struct dentry *rdentry,
const char *rpath, u64 rino,
const char **ppath, int *pathlen,
u64 *ino, int *freepath)
{
int r = 0;
if (rinode) {
r = build_inode_path(rinode, ppath, pathlen, ino, freepath);
dout(" inode %p %llx.%llx\n", rinode, ceph_ino(rinode),
ceph_snap(rinode));
} else if (rdentry) {
r = build_dentry_path(rdentry, ppath, pathlen, ino, freepath);
dout(" dentry %p %llx/%.*s\n", rdentry, *ino, *pathlen,
*ppath);
ceph: fix encoding of ino only (not relative) paths A 'path' consists of a starting ino and relative component. Encode even when there is no relative component. This is primarily needed by the NFS reexport code. Signed-off-by: Sage Weil <sage@newdream.net>
2011-08-15 20:02:37 +00:00
} else if (rpath || rino) {
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
*ino = rino;
*ppath = rpath;
ceph: Fix NULL ptr crash in strlen() set_request_path_attr() checks for NULL ptr before calling strlen() This fixes http://tracker.newdream.net/issues/3404 Signed-off-by: David Zafman <david.zafman@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-10-25 17:23:46 +00:00
*pathlen = rpath ? strlen(rpath) : 0;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
dout(" path %.*s\n", *pathlen, rpath);
}
return r;
}
/*
* called under mdsc->mutex
*/
static struct ceph_msg *create_request_message(struct ceph_mds_client *mdsc,
struct ceph_mds_request *req,
int mds)
{
struct ceph_msg *msg;
struct ceph_mds_request_head *head;
const char *path1 = NULL;
const char *path2 = NULL;
u64 ino1 = 0, ino2 = 0;
int pathlen1 = 0, pathlen2 = 0;
int freepath1 = 0, freepath2 = 0;
int len;
u16 releases;
void *p, *end;
int ret;
ret = set_request_path_attr(req->r_inode, req->r_dentry,
req->r_path1, req->r_ino1.ino,
&path1, &pathlen1, &ino1, &freepath1);
if (ret < 0) {
msg = ERR_PTR(ret);
goto out;
}
ret = set_request_path_attr(NULL, req->r_old_dentry,
req->r_path2, req->r_ino2.ino,
&path2, &pathlen2, &ino2, &freepath2);
if (ret < 0) {
msg = ERR_PTR(ret);
goto out_free1;
}
len = sizeof(*head) +
ceph: include type in ceph_entity_addr, filepath Include a type/version in ceph_entity_addr and filepath. Include extra byte in filepath encoding as necessary. Signed-off-by: Sage Weil <sage@newdream.net>
2010-01-27 22:28:10 +00:00
pathlen1 + pathlen2 + 2*(1 + sizeof(u32) + sizeof(u64));
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
/* calculate (max) length for cap releases */
len += sizeof(struct ceph_mds_request_release) *
(!!req->r_inode_drop + !!req->r_dentry_drop +
!!req->r_old_inode_drop + !!req->r_old_dentry_drop);
if (req->r_dentry_drop)
len += req->r_dentry->d_name.len;
if (req->r_old_dentry_drop)
len += req->r_old_dentry->d_name.len;
libceph: don't complain on msgpool alloc failures The pool allocation failures are masked by the pool; there is no need to spam the console about them. (That's the whole point of having the pool in the first place.) Mark msg allocations whose failure is safely handled as such. Signed-off-by: Sage Weil <sage@newdream.net>
2011-08-09 22:03:46 +00:00
msg = ceph_msg_new(CEPH_MSG_CLIENT_REQUEST, len, GFP_NOFS, false);
ceph: make ceph_msg_new return NULL on failure; clean up, fix callers Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure instead, and fix up the callers (about half of which were wrong anyway). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-01 23:06:19 +00:00
if (!msg) {
msg = ERR_PTR(-ENOMEM);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
goto out_free2;
ceph: make ceph_msg_new return NULL on failure; clean up, fix callers Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure instead, and fix up the callers (about half of which were wrong anyway). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-01 23:06:19 +00:00
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph: include transaction id in ceph_msg_header (protocol change) Many (most?) message types include a transaction id. By including it in the fixed size header, we always have it available even when we are unable to allocate memory for the (larger, variable sized) message body. This will allow us to error out the appropriate request instead of (silently) dropping the reply. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-22 19:24:33 +00:00
msg->hdr.tid = cpu_to_le64(req->r_tid);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
head = msg->front.iov_base;
p = msg->front.iov_base + sizeof(*head);
end = msg->front.iov_base + msg->front.iov_len;
head->mdsmap_epoch = cpu_to_le32(mdsc->mdsmap->m_epoch);
head->op = cpu_to_le32(req->r_op);
ceph: fix uid/gid on resent mds requests MDS requests can be rebuilt and resent in non-process context, but were filling in uid/gid from current_fsuid/gid. Put that information in the request struct on request setup. This fixes incorrect (and root) uid/gid getting set for requests that are forwarded between MDSs, usually due to metadata migrations. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-08 15:28:52 +00:00
head->caller_uid = cpu_to_le32(req->r_uid);
head->caller_gid = cpu_to_le32(req->r_gid);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
head->args = req->r_args;
ceph_encode_filepath(&p, end, ino1, path1);
ceph_encode_filepath(&p, end, ino2, path2);
ceph: do not include cap/dentry releases in replayed messages Strip the cap and dentry releases from replayed messages. They can cause the shared state to get out of sync because they were generated (with the request message) earlier, and no longer reflect the current client state. Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-15 21:58:39 +00:00
/* make note of release offset, in case we need to replay */
req->r_request_release_offset = p - msg->front.iov_base;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
/* cap releases */
releases = 0;
if (req->r_inode_drop)
releases += ceph_encode_inode_release(&p,
req->r_inode ? req->r_inode : req->r_dentry->d_inode,
mds, req->r_inode_drop, req->r_inode_unless, 0);
if (req->r_dentry_drop)
releases += ceph_encode_dentry_release(&p, req->r_dentry,
mds, req->r_dentry_drop, req->r_dentry_unless);
if (req->r_old_dentry_drop)
releases += ceph_encode_dentry_release(&p, req->r_old_dentry,
mds, req->r_old_dentry_drop, req->r_old_dentry_unless);
if (req->r_old_inode_drop)
releases += ceph_encode_inode_release(&p,
req->r_old_dentry->d_inode,
mds, req->r_old_inode_drop, req->r_old_inode_unless, 0);
head->num_releases = cpu_to_le16(releases);
BUG_ON(p > end);
msg->front.iov_len = p - msg->front.iov_base;
msg->hdr.front_len = cpu_to_le32(msg->front.iov_len);
msg->pages = req->r_pages;
msg->nr_pages = req->r_num_pages;
msg->hdr.data_len = cpu_to_le32(req->r_data_len);
msg->hdr.data_off = cpu_to_le16(0);
out_free2:
if (freepath2)
kfree((char *)path2);
out_free1:
if (freepath1)
kfree((char *)path1);
out:
return msg;
}
/*
* called under mdsc->mutex if error, under no mutex if
* success.
*/
static void complete_request(struct ceph_mds_client *mdsc,
struct ceph_mds_request *req)
{
if (req->r_callback)
req->r_callback(mdsc, req);
else
ceph: use complete_all and wake_up_all This fixes an issue triggered by running concurrent syncs. One of the syncs would go through while the other would just hang indefinitely. In any case, we never actually want to wake a single waiter, so the *_all functions should be used. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-27 20:11:08 +00:00
complete_all(&req->r_completion);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
/*
* called under mdsc->mutex
*/
static int __prepare_send_request(struct ceph_mds_client *mdsc,
struct ceph_mds_request *req,
int mds)
{
struct ceph_mds_request_head *rhead;
struct ceph_msg *msg;
int flags = 0;
req->r_attempts++;
ceph: handle ESTALE properly; on receipt send to authority if it wasn't Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-22 22:58:01 +00:00
if (req->r_inode) {
struct ceph_cap *cap =
ceph_get_cap_for_mds(ceph_inode(req->r_inode), mds);
if (cap)
req->r_sent_on_mseq = cap->mseq;
else
req->r_sent_on_mseq = -1;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
dout("prepare_send_request %p tid %lld %s (attempt %d)\n", req,
req->r_tid, ceph_mds_op_name(req->r_op), req->r_attempts);
ceph: reuse request message when replaying against recovering mds Replayed rename operations (after an mds failure/recovery) were broken because the request paths were regenerated from the dentry names, which get mangled when d_move() is called. Instead, resend the previous request message when replaying completed operations. Just make sure the REPLAY flag is set and the target ino is filled in. This fixes problems with workloads doing renames when the MDS restarts, where the rename operation appears to succeed, but on mds restart then fails (leading to client confusion, app breakage, etc.). Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-15 20:24:32 +00:00
if (req->r_got_unsafe) {
/*
* Replay. Do not regenerate message (and rebuild
* paths, etc.); just use the original message.
* Rebuilding paths will break for renames because
* d_move mangles the src name.
*/
msg = req->r_request;
rhead = msg->front.iov_base;
flags = le32_to_cpu(rhead->flags);
flags |= CEPH_MDS_FLAG_REPLAY;
rhead->flags = cpu_to_le32(flags);
if (req->r_target_inode)
rhead->ino = cpu_to_le64(ceph_ino(req->r_target_inode));
rhead->num_retry = req->r_attempts - 1;
ceph: do not include cap/dentry releases in replayed messages Strip the cap and dentry releases from replayed messages. They can cause the shared state to get out of sync because they were generated (with the request message) earlier, and no longer reflect the current client state. Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-15 21:58:39 +00:00
/* remove cap/dentry releases from message */
rhead->num_releases = 0;
msg->hdr.front_len = cpu_to_le32(req->r_request_release_offset);
msg->front.iov_len = req->r_request_release_offset;
ceph: reuse request message when replaying against recovering mds Replayed rename operations (after an mds failure/recovery) were broken because the request paths were regenerated from the dentry names, which get mangled when d_move() is called. Instead, resend the previous request message when replaying completed operations. Just make sure the REPLAY flag is set and the target ino is filled in. This fixes problems with workloads doing renames when the MDS restarts, where the rename operation appears to succeed, but on mds restart then fails (leading to client confusion, app breakage, etc.). Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-15 20:24:32 +00:00
return 0;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
if (req->r_request) {
ceph_msg_put(req->r_request);
req->r_request = NULL;
}
msg = create_request_message(mdsc, req, mds);
if (IS_ERR(msg)) {
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 18:19:06 +00:00
req->r_err = PTR_ERR(msg);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
complete_request(mdsc, req);
ceph: make ceph_msg_new return NULL on failure; clean up, fix callers Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure instead, and fix up the callers (about half of which were wrong anyway). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-01 23:06:19 +00:00
return PTR_ERR(msg);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
req->r_request = msg;
rhead = msg->front.iov_base;
rhead->oldest_client_tid = cpu_to_le64(__get_oldest_tid(mdsc));
if (req->r_got_unsafe)
flags |= CEPH_MDS_FLAG_REPLAY;
if (req->r_locked_dir)
flags |= CEPH_MDS_FLAG_WANT_DENTRY;
rhead->flags = cpu_to_le32(flags);
rhead->num_fwd = req->r_num_fwd;
rhead->num_retry = req->r_attempts - 1;
ceph: reuse request message when replaying against recovering mds Replayed rename operations (after an mds failure/recovery) were broken because the request paths were regenerated from the dentry names, which get mangled when d_move() is called. Instead, resend the previous request message when replaying completed operations. Just make sure the REPLAY flag is set and the target ino is filled in. This fixes problems with workloads doing renames when the MDS restarts, where the rename operation appears to succeed, but on mds restart then fails (leading to client confusion, app breakage, etc.). Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-15 20:24:32 +00:00
rhead->ino = 0;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
dout(" r_locked_dir = %p\n", req->r_locked_dir);
return 0;
}
/*
* send request, or put it on the appropriate wait list.
*/
static int __do_request(struct ceph_mds_client *mdsc,
struct ceph_mds_request *req)
{
struct ceph_mds_session *session = NULL;
int mds = -1;
int err = -EAGAIN;
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 18:19:06 +00:00
if (req->r_err || req->r_got_result)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
goto out;
if (req->r_timeout &&
time_after_eq(jiffies, req->r_started + req->r_timeout)) {
dout("do_request timed out\n");
err = -EIO;
goto finish;
}
ceph: associate requests with opening sessions Associate request with sessions that aren't yep open. This makes the debugfs mdsc request list more informative. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-02 20:49:00 +00:00
put_request_session(req);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
mds = __choose_mds(mdsc, req);
if (mds < 0 ||
ceph_mdsmap_get_state(mdsc->mdsmap, mds) < CEPH_MDS_STATE_ACTIVE) {
dout("do_request no mds or not active, waiting for map\n");
list_add(&req->r_wait, &mdsc->waiting_for_map);
goto out;
}
/* get, open session */
session = __ceph_lookup_mds_session(mdsc, mds);
ceph: propagate mds session allocation failures to caller Return error to original caller if register_session() fails. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-21 03:43:28 +00:00
if (!session) {
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
session = register_session(mdsc, mds);
ceph: propagate mds session allocation failures to caller Return error to original caller if register_session() fails. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-21 03:43:28 +00:00
if (IS_ERR(session)) {
err = PTR_ERR(session);
goto finish;
}
}
ceph: associate requests with opening sessions Associate request with sessions that aren't yep open. This makes the debugfs mdsc request list more informative. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-02 20:49:00 +00:00
req->r_session = get_session(session);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
dout("do_request mds%d session %p state %s\n", mds, session,
session_state_name(session->s_state));
if (session->s_state != CEPH_MDS_SESSION_OPEN &&
session->s_state != CEPH_MDS_SESSION_HUNG) {
if (session->s_state == CEPH_MDS_SESSION_NEW ||
session->s_state == CEPH_MDS_SESSION_CLOSING)
__open_session(mdsc, session);
list_add(&req->r_wait, &session->s_waiting);
goto out_session;
}
/* send request */
req->r_resend_mds = -1; /* forget any previous mds hint */
if (req->r_request_started == 0) /* note request start time */
req->r_request_started = jiffies;
err = __prepare_send_request(mdsc, req, mds);
if (!err) {
ceph_msg_get(req->r_request);
ceph_con_send(&session->s_con, req->r_request);
}
out_session:
ceph_put_mds_session(session);
out:
return err;
finish:
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 18:19:06 +00:00
req->r_err = err;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
complete_request(mdsc, req);
goto out;
}
/*
* called under mdsc->mutex
*/
static void __wake_requests(struct ceph_mds_client *mdsc,
struct list_head *head)
{
ceph: Fix infinite loop in __wake_requests __wake_requests() will enter infinite loop if we use it to wake requests in the session->s_waiting list. __wake_requests() deletes requests from the list and __do_request() adds requests back to the list. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2012-11-19 02:49:06 +00:00
struct ceph_mds_request *req;
LIST_HEAD(tmp_list);
list_splice_init(head, &tmp_list);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph: Fix infinite loop in __wake_requests __wake_requests() will enter infinite loop if we use it to wake requests in the session->s_waiting list. __wake_requests() deletes requests from the list and __do_request() adds requests back to the list. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2012-11-19 02:49:06 +00:00
while (!list_empty(&tmp_list)) {
req = list_entry(tmp_list.next,
struct ceph_mds_request, r_wait);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
list_del_init(&req->r_wait);
__do_request(mdsc, req);
}
}
/*
* Wake up threads with requests pending for @mds, so that they can
ceph: wait for mds OPEN reply to indicate reconnect success We used to infer reconnect success by watching the MDS state, essentially assuming that hearing nothing meant things were ok. That wasn't particularly reliable. Instead, the MDS replies with an explicit OPEN message to indicate success. Strictly speaking, this is a protocol change, but it is a backwards compatible one that does not break new clients + old servers or old clients + new servers. At least not yet. Drop unused @all argument from kick_requests while we're at it. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-18 21:45:05 +00:00
* resubmit their requests to a possibly different mds.
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
*/
ceph: wait for mds OPEN reply to indicate reconnect success We used to infer reconnect success by watching the MDS state, essentially assuming that hearing nothing meant things were ok. That wasn't particularly reliable. Instead, the MDS replies with an explicit OPEN message to indicate success. Strictly speaking, this is a protocol change, but it is a backwards compatible one that does not break new clients + old servers or old clients + new servers. At least not yet. Drop unused @all argument from kick_requests while we're at it. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-18 21:45:05 +00:00
static void kick_requests(struct ceph_mds_client *mdsc, int mds)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
{
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-15 20:08:46 +00:00
struct ceph_mds_request *req;
struct rb_node *p;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
dout("kick_requests mds%d\n", mds);
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-15 20:08:46 +00:00
for (p = rb_first(&mdsc->request_tree); p; p = rb_next(p)) {
req = rb_entry(p, struct ceph_mds_request, r_node);
if (req->r_got_unsafe)
continue;
if (req->r_session &&
req->r_session->s_mds == mds) {
dout(" kicking tid %llu\n", req->r_tid);
__do_request(mdsc, req);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
}
}
void ceph_mdsc_submit_request(struct ceph_mds_client *mdsc,
struct ceph_mds_request *req)
{
dout("submit_request on %p\n", req);
mutex_lock(&mdsc->mutex);
__register_request(mdsc, req, NULL);
__do_request(mdsc, req);
mutex_unlock(&mdsc->mutex);
}
/*
* Synchrously perform an mds request. Take care of all of the
* session setup, forwarding, retry details.
*/
int ceph_mdsc_do_request(struct ceph_mds_client *mdsc,
struct inode *dir,
struct ceph_mds_request *req)
{
int err;
dout("do_request on %p\n", req);
/* take CAP_PIN refs for r_inode, r_locked_dir, r_old_dentry */
if (req->r_inode)
ceph_get_cap_refs(ceph_inode(req->r_inode), CEPH_CAP_PIN);
if (req->r_locked_dir)
ceph_get_cap_refs(ceph_inode(req->r_locked_dir), CEPH_CAP_PIN);
if (req->r_old_dentry)
ceph: explicitly reference rename old_dentry parent dir in request We carry a pin on the parent directory for the rename source and dest dentries. For the source it's r_locked_dir; we need to explicitly reference the old_dentry parent as well, since the dentry's d_parent may change between when the request was created and pinned and when it is freed. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26 18:31:14 +00:00
ceph_get_cap_refs(ceph_inode(req->r_old_dentry_dir),
CEPH_CAP_PIN);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
/* issue */
mutex_lock(&mdsc->mutex);
__register_request(mdsc, req, dir);
__do_request(mdsc, req);
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 18:19:06 +00:00
if (req->r_err) {
err = req->r_err;
__unregister_request(mdsc, req);
dout("do_request early error %d\n", err);
goto out;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 18:19:06 +00:00
/* wait */
mutex_unlock(&mdsc->mutex);
dout("do_request waiting\n");
if (req->r_timeout) {
ceph: make mds requests killable, not interruptible The underlying problem is that many mds requests can't be restarted. For example, a restarted create() would return -EEXIST if the original request succeeds. However, we do not want a hung MDS to hang the client too. So, use the _killable wait_for_completion variants to abort on SIGKILL but nothing else. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-24 18:15:51 +00:00
err = (long)wait_for_completion_killable_timeout(
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 18:19:06 +00:00
&req->r_completion, req->r_timeout);
if (err == 0)
err = -EIO;
} else {
ceph: make mds requests killable, not interruptible The underlying problem is that many mds requests can't be restarted. For example, a restarted create() would return -EEXIST if the original request succeeds. However, we do not want a hung MDS to hang the client too. So, use the _killable wait_for_completion variants to abort on SIGKILL but nothing else. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-24 18:15:51 +00:00
err = wait_for_completion_killable(&req->r_completion);
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 18:19:06 +00:00
}
dout("do_request waited, got %d\n", err);
mutex_lock(&mdsc->mutex);
ceph: properly handle aborted mds requests Previously, if the MDS request was interrupted, we would unregister the request and ignore any reply. This could cause the caps or other cache state to become out of sync. (For instance, aborting dbench and doing rm -r on clients would complain about a non-empty directory because the client didn't realize it's aborted file create request completed.) Even we don't unregister, we still can't process the reply normally because we are no longer holding the caller's locks (like the dir i_mutex). So, mark aborted operations with r_aborted, and in the reply handler, be sure to process all the caps. Do not process the namespace changes, though, since we no longer will hold the dir i_mutex. The dentry lease state can also be ignored as it's more forgiving. Signed-off-by: Sage Weil <sage@newdream.net>
2010-01-25 19:33:08 +00:00
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 18:19:06 +00:00
/* only abort if we didn't race with a real reply */
if (req->r_got_result) {
err = le32_to_cpu(req->r_reply_info.head->result);
} else if (err < 0) {
dout("aborted request %lld with %d\n", req->r_tid, err);
ceph: fix race between aborted requests and fill_trace When we abort requests we need to prevent fill_trace et al from doing anything that relies on locks held by the VFS caller. This fixes a race between the reply handler and the abort code, ensuring that continue holding the dir mutex until the reply handler completes. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 19:01:13 +00:00
/*
* ensure we aren't running concurrently with
* ceph_fill_trace or ceph_readdir_prepopulate, which
* rely on locks (dir mutex) held by our caller.
*/
mutex_lock(&req->r_fill_mutex);
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 18:19:06 +00:00
req->r_err = err;
req->r_aborted = true;
ceph: fix race between aborted requests and fill_trace When we abort requests we need to prevent fill_trace et al from doing anything that relies on locks held by the VFS caller. This fixes a race between the reply handler and the abort code, ensuring that continue holding the dir mutex until the reply handler completes. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 19:01:13 +00:00
mutex_unlock(&req->r_fill_mutex);
ceph: properly handle aborted mds requests Previously, if the MDS request was interrupted, we would unregister the request and ignore any reply. This could cause the caps or other cache state to become out of sync. (For instance, aborting dbench and doing rm -r on clients would complain about a non-empty directory because the client didn't realize it's aborted file create request completed.) Even we don't unregister, we still can't process the reply normally because we are no longer holding the caller's locks (like the dir i_mutex). So, mark aborted operations with r_aborted, and in the reply handler, be sure to process all the caps. Do not process the namespace changes, though, since we no longer will hold the dir i_mutex. The dentry lease state can also be ignored as it's more forgiving. Signed-off-by: Sage Weil <sage@newdream.net>
2010-01-25 19:33:08 +00:00
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 18:19:06 +00:00
if (req->r_locked_dir &&
ceph: use common helper for aborted dir request invalidation We invalidate I_COMPLETE and dentry leases in two places: on aborted mds request and on request replay. Use common helper to avoid duplicate code. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 17:02:57 +00:00
(req->r_op & CEPH_MDS_OP_WRITE))
ceph_invalidate_dir_request(req);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
} else {
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 18:19:06 +00:00
err = req->r_err;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 18:19:06 +00:00
out:
mutex_unlock(&mdsc->mutex);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
dout("do_request %p done, result %d\n", req, err);
return err;
}
ceph: use common helper for aborted dir request invalidation We invalidate I_COMPLETE and dentry leases in two places: on aborted mds request and on request replay. Use common helper to avoid duplicate code. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 17:02:57 +00:00
/*
ceph: use new D_COMPLETE dentry flag We used to use a flag on the directory inode to track whether the dcache contents for a directory were a complete cached copy. Switch to a dentry flag CEPH_D_COMPLETE that is safely updated by ->d_prune(). Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-03 16:23:36 +00:00
* Invalidate dir D_COMPLETE, dentry lease state on an aborted MDS
ceph: use common helper for aborted dir request invalidation We invalidate I_COMPLETE and dentry leases in two places: on aborted mds request and on request replay. Use common helper to avoid duplicate code. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 17:02:57 +00:00
* namespace request.
*/
void ceph_invalidate_dir_request(struct ceph_mds_request *req)
{
struct inode *inode = req->r_locked_dir;
struct ceph_inode_info *ci = ceph_inode(inode);
ceph: use new D_COMPLETE dentry flag We used to use a flag on the directory inode to track whether the dcache contents for a directory were a complete cached copy. Switch to a dentry flag CEPH_D_COMPLETE that is safely updated by ->d_prune(). Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-03 16:23:36 +00:00
dout("invalidate_dir_request %p (D_COMPLETE, lease(s))\n", inode);
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-30 17:47:09 +00:00
spin_lock(&ci->i_ceph_lock);
ceph: use new D_COMPLETE dentry flag We used to use a flag on the directory inode to track whether the dcache contents for a directory were a complete cached copy. Switch to a dentry flag CEPH_D_COMPLETE that is safely updated by ->d_prune(). Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-03 16:23:36 +00:00
ceph_dir_clear_complete(inode);
ceph: use common helper for aborted dir request invalidation We invalidate I_COMPLETE and dentry leases in two places: on aborted mds request and on request replay. Use common helper to avoid duplicate code. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 17:02:57 +00:00
ci->i_release_count++;
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-30 17:47:09 +00:00
spin_unlock(&ci->i_ceph_lock);
ceph: use common helper for aborted dir request invalidation We invalidate I_COMPLETE and dentry leases in two places: on aborted mds request and on request replay. Use common helper to avoid duplicate code. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 17:02:57 +00:00
if (req->r_dentry)
ceph_invalidate_dentry_lease(req->r_dentry);
if (req->r_old_dentry)
ceph_invalidate_dentry_lease(req->r_old_dentry);
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
/*
* Handle mds reply.
*
* We take the session mutex and parse and process the reply immediately.
* This preserves the logical ordering of replies, capabilities, etc., sent
* by the MDS as they are applied to our local cache.
*/
static void handle_reply(struct ceph_mds_session *session, struct ceph_msg *msg)
{
struct ceph_mds_client *mdsc = session->s_mdsc;
struct ceph_mds_request *req;
struct ceph_mds_reply_head *head = msg->front.iov_base;
struct ceph_mds_reply_info_parsed *rinfo; /* parsed reply info */
u64 tid;
int err, result;
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-22 23:12:16 +00:00
int mds = session->s_mds;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
if (msg->front.iov_len < sizeof(*head)) {
pr_err("mdsc_handle_reply got corrupt (short) reply\n");
ceph: hex dump corrupt server data to KERN_DEBUG Also, print fsid using standard format, NOT hex dump. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-14 23:13:47 +00:00
ceph_msg_dump(msg);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
return;
}
/* get request, session */
ceph: include transaction id in ceph_msg_header (protocol change) Many (most?) message types include a transaction id. By including it in the fixed size header, we always have it available even when we are unable to allocate memory for the (larger, variable sized) message body. This will allow us to error out the appropriate request instead of (silently) dropping the reply. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-22 19:24:33 +00:00
tid = le64_to_cpu(msg->hdr.tid);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
mutex_lock(&mdsc->mutex);
req = __lookup_request(mdsc, tid);
if (!req) {
dout("handle_reply on unknown tid %llu\n", tid);
mutex_unlock(&mdsc->mutex);
return;
}
dout("handle_reply %p\n", req);
/* correct session? */
ceph: fix session check on mds reply Fix a broken check that a reply came back from the same MDS we sent the request to. I don't think a case that actually triggers this would ever come up in practice, but it's clearly wrong and easy to fix. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-21 03:50:58 +00:00
if (req->r_session != session) {
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
pr_err("mdsc_handle_reply got %llu on session mds%d"
" not mds%d\n", tid, session->s_mds,
req->r_session ? req->r_session->s_mds : -1);
mutex_unlock(&mdsc->mutex);
goto out;
}
/* dup? */
if ((req->r_got_unsafe && !head->safe) ||
(req->r_got_safe && head->safe)) {
pr_warning("got a dup %s reply on %llu from mds%d\n",
head->safe ? "safe" : "unsafe", tid, mds);
mutex_unlock(&mdsc->mutex);
goto out;
}
ceph: cope with out of order (unsafe after safe) mds reply Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 16:06:02 +00:00
if (req->r_got_safe && !head->safe) {
pr_warning("got unsafe after safe on %llu from mds%d\n",
tid, mds);
mutex_unlock(&mdsc->mutex);
goto out;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
result = le32_to_cpu(head->result);
/*
ceph: handle ESTALE properly; on receipt send to authority if it wasn't Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-22 22:58:01 +00:00
* Handle an ESTALE
* if we're not talking to the authority, send to them
* if the authority has changed while we weren't looking,
* send to new authority
* Otherwise we just have to return an ESTALE
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
*/
if (result == -ESTALE) {
ceph: handle ESTALE properly; on receipt send to authority if it wasn't Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-22 22:58:01 +00:00
dout("got ESTALE on request %llu", req->r_tid);
ceph: whitespace cleanup Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-03 17:25:11 +00:00
if (!req->r_inode) {
/* do nothing; not an authority problem */
} else if (req->r_direct_mode != USE_AUTH_MDS) {
ceph: handle ESTALE properly; on receipt send to authority if it wasn't Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-22 22:58:01 +00:00
dout("not using auth, setting for that now");
req->r_direct_mode = USE_AUTH_MDS;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
__do_request(mdsc, req);
mutex_unlock(&mdsc->mutex);
goto out;
ceph: handle ESTALE properly; on receipt send to authority if it wasn't Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-22 22:58:01 +00:00
} else {
struct ceph_inode_info *ci = ceph_inode(req->r_inode);
ceph: drop redundant r_mds field The r_mds field is redundant, since we can find the same information at r_session->s_mds, and when r_session is NULL then r_mds is meaningless. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-02 20:41:47 +00:00
struct ceph_cap *cap = NULL;
if (req->r_session)
cap = ceph_get_cap_for_mds(ci,
req->r_session->s_mds);
ceph: handle ESTALE properly; on receipt send to authority if it wasn't Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-22 22:58:01 +00:00
dout("already using auth");
if ((!cap || cap != ci->i_auth_cap) ||
(cap->mseq != req->r_sent_on_mseq)) {
dout("but cap changed, so resending");
__do_request(mdsc, req);
mutex_unlock(&mdsc->mutex);
goto out;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
ceph: handle ESTALE properly; on receipt send to authority if it wasn't Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-22 22:58:01 +00:00
dout("have to return ESTALE on request %llu", req->r_tid);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
ceph: handle ESTALE properly; on receipt send to authority if it wasn't Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-22 22:58:01 +00:00
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
if (head->safe) {
req->r_got_safe = true;
__unregister_request(mdsc, req);
ceph: use complete_all and wake_up_all This fixes an issue triggered by running concurrent syncs. One of the syncs would go through while the other would just hang indefinitely. In any case, we never actually want to wake a single waiter, so the *_all functions should be used. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-27 20:11:08 +00:00
complete_all(&req->r_safe_completion);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
if (req->r_got_unsafe) {
/*
* We already handled the unsafe response, now do the
* cleanup. No need to examine the response; the MDS
* doesn't include any result info in the safe
* response. And even if it did, there is nothing
* useful we could do with a revised return value.
*/
dout("got safe reply %llu, mds%d\n", tid, mds);
list_del_init(&req->r_unsafe_item);
/* last unsafe request during umount? */
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-15 20:08:46 +00:00
if (mdsc->stopping && !__get_oldest_req(mdsc))
ceph: use complete_all and wake_up_all This fixes an issue triggered by running concurrent syncs. One of the syncs would go through while the other would just hang indefinitely. In any case, we never actually want to wake a single waiter, so the *_all functions should be used. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-27 20:11:08 +00:00
complete_all(&mdsc->safe_umount_waiters);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
mutex_unlock(&mdsc->mutex);
goto out;
}
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 18:19:06 +00:00
} else {
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
req->r_got_unsafe = true;
list_add_tail(&req->r_unsafe_item, &req->r_session->s_unsafe);
}
dout("handle_reply tid %lld result %d\n", tid, result);
rinfo = &req->r_reply_info;
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 01:37:52 +00:00
err = parse_reply_info(msg, rinfo, session->s_con.peer_features);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
mutex_unlock(&mdsc->mutex);
mutex_lock(&session->s_mutex);
if (err < 0) {
ceph: Handle file locks in replies from the MDS. Previously the kernel client incorrectly assumed everything was a directory. Signed-off-by: Herb Shiu <herb_shiu@tcloudcomputing.com> Acked-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-01 22:14:38 +00:00
pr_err("mdsc_handle_reply got corrupt reply mds%d(tid:%lld)\n", mds, tid);
ceph: hex dump corrupt server data to KERN_DEBUG Also, print fsid using standard format, NOT hex dump. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-14 23:13:47 +00:00
ceph_msg_dump(msg);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
goto out_err;
}
/* snap trace */
if (rinfo->snapblob_len) {
down_write(&mdsc->snap_rwsem);
ceph_update_snap_trace(mdsc, rinfo->snapblob,
rinfo->snapblob + rinfo->snapblob_len,
le32_to_cpu(head->op) == CEPH_MDS_OP_RMSNAP);
downgrade_write(&mdsc->snap_rwsem);
} else {
down_read(&mdsc->snap_rwsem);
}
/* insert trace into our cache */
ceph: fix race between aborted requests and fill_trace When we abort requests we need to prevent fill_trace et al from doing anything that relies on locks held by the VFS caller. This fixes a race between the reply handler and the abort code, ensuring that continue holding the dir mutex until the reply handler completes. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 19:01:13 +00:00
mutex_lock(&req->r_fill_mutex);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
err = ceph_fill_trace(mdsc->fsc->sb, req, req->r_session);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
if (err == 0) {
ceph: Handle file locks in replies from the MDS. Previously the kernel client incorrectly assumed everything was a directory. Signed-off-by: Herb Shiu <herb_shiu@tcloudcomputing.com> Acked-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-01 22:14:38 +00:00
if (result == 0 && req->r_op != CEPH_MDS_OP_GETFILELOCK &&
rinfo->dir_nr)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph_readdir_prepopulate(req, req->r_session);
ceph: do caps accounting per mds_client Caps related accounting is now being done per mds client instead of just being global. This prepares ground work for a later revision of the caps preallocated reservation list. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-17 23:16:12 +00:00
ceph_unreserve_caps(mdsc, &req->r_caps_reservation);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
ceph: fix race between aborted requests and fill_trace When we abort requests we need to prevent fill_trace et al from doing anything that relies on locks held by the VFS caller. This fixes a race between the reply handler and the abort code, ensuring that continue holding the dir mutex until the reply handler completes. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 19:01:13 +00:00
mutex_unlock(&req->r_fill_mutex);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
up_read(&mdsc->snap_rwsem);
out_err:
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 18:19:06 +00:00
mutex_lock(&mdsc->mutex);
if (!req->r_aborted) {
if (err) {
req->r_err = err;
} else {
req->r_reply = msg;
ceph_msg_get(msg);
req->r_got_result = true;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
} else {
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 18:19:06 +00:00
dout("reply arrived after request %lld was aborted\n", tid);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 18:19:06 +00:00
mutex_unlock(&mdsc->mutex);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph: drop unused argument Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-10 19:55:52 +00:00
ceph_add_cap_releases(mdsc, req->r_session);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
mutex_unlock(&session->s_mutex);
/* kick calling process */
complete_request(mdsc, req);
out:
ceph_mdsc_put_request(req);
return;
}
/*
* handle mds notification that our request has been forwarded.
*/
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-22 23:12:16 +00:00
static void handle_forward(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session,
struct ceph_msg *msg)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
{
struct ceph_mds_request *req;
ceph: fix client_request_forward decoding The tid is in the message header, not body. Broken since 6df058c0. No need to look at next mds session; just mark the request and be done. (The old error path was broken too, but now it's gone.) Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-23 22:02:44 +00:00
u64 tid = le64_to_cpu(msg->hdr.tid);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
u32 next_mds;
u32 fwd_seq;
int err = -EINVAL;
void *p = msg->front.iov_base;
void *end = p + msg->front.iov_len;
ceph: fix client_request_forward decoding The tid is in the message header, not body. Broken since 6df058c0. No need to look at next mds session; just mark the request and be done. (The old error path was broken too, but now it's gone.) Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-23 22:02:44 +00:00
ceph_decode_need(&p, end, 2*sizeof(u32), bad);
ceph: convert encode/decode macros to inlines This avoids the fugly pass by reference and makes the code a bit easier to read. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-14 16:59:09 +00:00
next_mds = ceph_decode_32(&p);
fwd_seq = ceph_decode_32(&p);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
mutex_lock(&mdsc->mutex);
req = __lookup_request(mdsc, tid);
if (!req) {
ceph: clean up on forwarded aborted mds request If an mds request is aborted (timeout, SIGKILL), it is left registered to keep our state in sync with the mds. If we get a forward notification, though, we know the request didn't succeed and we can unregister it safely. We were trying to resend it, but then bailing out (and not unregistering) in __do_request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-28 23:43:16 +00:00
dout("forward tid %llu to mds%d - req dne\n", tid, next_mds);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
goto out; /* dup reply? */
}
ceph: clean up on forwarded aborted mds request If an mds request is aborted (timeout, SIGKILL), it is left registered to keep our state in sync with the mds. If we get a forward notification, though, we know the request didn't succeed and we can unregister it safely. We were trying to resend it, but then bailing out (and not unregistering) in __do_request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-28 23:43:16 +00:00
if (req->r_aborted) {
dout("forward tid %llu aborted, unregistering\n", tid);
__unregister_request(mdsc, req);
} else if (fwd_seq <= req->r_num_fwd) {
dout("forward tid %llu to mds%d - old seq %d <= %d\n",
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
tid, next_mds, req->r_num_fwd, fwd_seq);
} else {
/* resend. forward race not possible; mds would drop */
ceph: clean up on forwarded aborted mds request If an mds request is aborted (timeout, SIGKILL), it is left registered to keep our state in sync with the mds. If we get a forward notification, though, we know the request didn't succeed and we can unregister it safely. We were trying to resend it, but then bailing out (and not unregistering) in __do_request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-28 23:43:16 +00:00
dout("forward tid %llu to mds%d (we resend)\n", tid, next_mds);
BUG_ON(req->r_err);
BUG_ON(req->r_got_result);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
req->r_num_fwd = fwd_seq;
req->r_resend_mds = next_mds;
put_request_session(req);
__do_request(mdsc, req);
}
ceph_mdsc_put_request(req);
out:
mutex_unlock(&mdsc->mutex);
return;
bad:
pr_err("mdsc_handle_forward decode error err=%d\n", err);
}
/*
* handle a mds session control message
*/
static void handle_session(struct ceph_mds_session *session,
struct ceph_msg *msg)
{
struct ceph_mds_client *mdsc = session->s_mdsc;
u32 op;
u64 seq;
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-22 23:12:16 +00:00
int mds = session->s_mds;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
struct ceph_mds_session_head *h = msg->front.iov_base;
int wake = 0;
/* decode */
if (msg->front.iov_len != sizeof(*h))
goto bad;
op = le32_to_cpu(h->op);
seq = le64_to_cpu(h->seq);
mutex_lock(&mdsc->mutex);
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-22 23:12:16 +00:00
if (op == CEPH_SESSION_CLOSE)
__unregister_session(mdsc, session);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
/* FIXME: this ttl calculation is generous */
session->s_ttl = jiffies + HZ*mdsc->mdsmap->m_session_autoclose;
mutex_unlock(&mdsc->mutex);
mutex_lock(&session->s_mutex);
dout("handle_session mds%d %s %p state %s seq %llu\n",
mds, ceph_session_op_name(op), session,
session_state_name(session->s_state), seq);
if (session->s_state == CEPH_MDS_SESSION_HUNG) {
session->s_state = CEPH_MDS_SESSION_OPEN;
pr_info("mds%d came back\n", session->s_mds);
}
switch (op) {
case CEPH_SESSION_OPEN:
ceph: wait for mds OPEN reply to indicate reconnect success We used to infer reconnect success by watching the MDS state, essentially assuming that hearing nothing meant things were ok. That wasn't particularly reliable. Instead, the MDS replies with an explicit OPEN message to indicate success. Strictly speaking, this is a protocol change, but it is a backwards compatible one that does not break new clients + old servers or old clients + new servers. At least not yet. Drop unused @all argument from kick_requests while we're at it. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-18 21:45:05 +00:00
if (session->s_state == CEPH_MDS_SESSION_RECONNECTING)
pr_info("mds%d reconnect success\n", session->s_mds);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
session->s_state = CEPH_MDS_SESSION_OPEN;
renewed_caps(mdsc, session, 0);
wake = 1;
if (mdsc->stopping)
__close_session(mdsc, session);
break;
case CEPH_SESSION_RENEWCAPS:
if (session->s_renew_seq == seq)
renewed_caps(mdsc, session, 1);
break;
case CEPH_SESSION_CLOSE:
ceph: wait for mds OPEN reply to indicate reconnect success We used to infer reconnect success by watching the MDS state, essentially assuming that hearing nothing meant things were ok. That wasn't particularly reliable. Instead, the MDS replies with an explicit OPEN message to indicate success. Strictly speaking, this is a protocol change, but it is a backwards compatible one that does not break new clients + old servers or old clients + new servers. At least not yet. Drop unused @all argument from kick_requests while we're at it. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-18 21:45:05 +00:00
if (session->s_state == CEPH_MDS_SESSION_RECONNECTING)
pr_info("mds%d reconnect denied\n", session->s_mds);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
remove_session_caps(session);
wake = 1; /* for good measure */
ceph: fix multiple mds session shutdown The use of a completion when waiting for session shutdown during umount is inappropriate, given the complexity of the condition. For multiple MDS's, this resulted in the umount thread spinning, often preventing the session close message from being processed in some cases. Switch to a waitqueue and defined a condition helper. This cleans things up nicely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-11 21:51:23 +00:00
wake_up_all(&mdsc->session_close_wq);
ceph: wait for mds OPEN reply to indicate reconnect success We used to infer reconnect success by watching the MDS state, essentially assuming that hearing nothing meant things were ok. That wasn't particularly reliable. Instead, the MDS replies with an explicit OPEN message to indicate success. Strictly speaking, this is a protocol change, but it is a backwards compatible one that does not break new clients + old servers or old clients + new servers. At least not yet. Drop unused @all argument from kick_requests while we're at it. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-18 21:45:05 +00:00
kick_requests(mdsc, mds);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
break;
case CEPH_SESSION_STALE:
pr_info("mds%d caps went stale, renewing\n",
session->s_mds);
ceph: create a new session lock to avoid lock inversion Lockdep was reporting a possible circular lock dependency in dentry_lease_is_valid(). That function needs to sample the session's s_cap_gen and and s_cap_ttl fields coherently, but needs to do so while holding a dentry lock. The s_cap_lock field was being used to protect the two fields, but that can't be taken while holding a lock on a dentry within the session. In most cases, the s_cap_gen and s_cap_ttl fields only get operated on separately. But in three cases they need to be updated together. Implement a new lock to protect the spots updating both fields atomically is required. Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
2012-01-13 01:48:10 +00:00
spin_lock(&session->s_gen_ttl_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
session->s_cap_gen++;
ceph: don't reset s_cap_ttl to zero Avoid the need to check for a special zero s_cap_ttl value by just using (jiffies - 1) as the value assigned to indicate "sometime in the past." Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
2012-01-13 01:48:11 +00:00
session->s_cap_ttl = jiffies - 1;
ceph: create a new session lock to avoid lock inversion Lockdep was reporting a possible circular lock dependency in dentry_lease_is_valid(). That function needs to sample the session's s_cap_gen and and s_cap_ttl fields coherently, but needs to do so while holding a dentry lock. The s_cap_lock field was being used to protect the two fields, but that can't be taken while holding a lock on a dentry within the session. In most cases, the s_cap_gen and s_cap_ttl fields only get operated on separately. But in three cases they need to be updated together. Implement a new lock to protect the spots updating both fields atomically is required. Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
2012-01-13 01:48:10 +00:00
spin_unlock(&session->s_gen_ttl_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
send_renew_caps(mdsc, session);
break;
case CEPH_SESSION_RECALL_STATE:
trim_caps(mdsc, session, le32_to_cpu(h->max_caps));
break;
default:
pr_err("mdsc_handle_session bad op %d mds%d\n", op, mds);
WARN_ON(1);
}
mutex_unlock(&session->s_mutex);
if (wake) {
mutex_lock(&mdsc->mutex);
__wake_requests(mdsc, &session->s_waiting);
mutex_unlock(&mdsc->mutex);
}
return;
bad:
pr_err("mdsc_handle_session corrupt message mds%d len %d\n", mds,
(int)msg->front.iov_len);
ceph: hex dump corrupt server data to KERN_DEBUG Also, print fsid using standard format, NOT hex dump. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-14 23:13:47 +00:00
ceph_msg_dump(msg);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
return;
}
/*
* called under session->mutex.
*/
static void replay_unsafe_requests(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session)
{
struct ceph_mds_request *req, *nreq;
int err;
dout("replay_unsafe_requests mds%d\n", session->s_mds);
mutex_lock(&mdsc->mutex);
list_for_each_entry_safe(req, nreq, &session->s_unsafe, r_unsafe_item) {
err = __prepare_send_request(mdsc, req, session->s_mds);
if (!err) {
ceph_msg_get(req->r_request);
ceph_con_send(&session->s_con, req->r_request);
}
}
mutex_unlock(&mdsc->mutex);
}
/*
* Encode information about a cap for a reconnect with the MDS.
*/
static int encode_caps_cb(struct inode *inode, struct ceph_cap *cap,
void *arg)
{
ceph: support v2 reconnect encoding Encode either old or v2 encoding of client_reconnect message, depending on whether the peer has the FLOCK feature bit. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-12 22:21:32 +00:00
union {
struct ceph_mds_cap_reconnect v2;
struct ceph_mds_cap_reconnect_v1 v1;
} rec;
size_t reclen;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
struct ceph_inode_info *ci;
ceph: support v2 reconnect encoding Encode either old or v2 encoding of client_reconnect message, depending on whether the peer has the FLOCK feature bit. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-12 22:21:32 +00:00
struct ceph_reconnect_state *recon_state = arg;
struct ceph_pagelist *pagelist = recon_state->pagelist;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
char *path;
int pathlen, err;
u64 pathbase;
struct dentry *dentry;
ci = cap->ci;
dout(" adding %p ino %llx.%llx cap %p %lld %s\n",
inode, ceph_vinop(inode), cap, cap->cap_id,
ceph_cap_string(cap->issued));
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-23 20:21:51 +00:00
err = ceph_pagelist_encode_64(pagelist, ceph_ino(inode));
if (err)
return err;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
dentry = d_find_alias(inode);
if (dentry) {
path = ceph_mdsc_build_path(dentry, &pathlen, &pathbase, 0);
if (IS_ERR(path)) {
err = PTR_ERR(path);
ceph: don't BUG on ENOMEM during mds reconnect We are in a position to return an error; do that instead. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-26 16:26:37 +00:00
goto out_dput;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
} else {
path = NULL;
pathlen = 0;
}
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-23 20:21:51 +00:00
err = ceph_pagelist_encode_string(pagelist, path, pathlen);
if (err)
ceph: don't BUG on ENOMEM during mds reconnect We are in a position to return an error; do that instead. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-26 16:26:37 +00:00
goto out_free;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-30 17:47:09 +00:00
spin_lock(&ci->i_ceph_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
cap->seq = 0; /* reset cap seq */
cap->issue_seq = 0; /* and issue_seq */
ceph: support v2 reconnect encoding Encode either old or v2 encoding of client_reconnect message, depending on whether the peer has the FLOCK feature bit. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-12 22:21:32 +00:00
if (recon_state->flock) {
rec.v2.cap_id = cpu_to_le64(cap->cap_id);
rec.v2.wanted = cpu_to_le32(__ceph_caps_wanted(ci));
rec.v2.issued = cpu_to_le32(cap->issued);
rec.v2.snaprealm = cpu_to_le64(ci->i_snap_realm->ino);
rec.v2.pathbase = cpu_to_le64(pathbase);
rec.v2.flock_len = 0;
reclen = sizeof(rec.v2);
} else {
rec.v1.cap_id = cpu_to_le64(cap->cap_id);
rec.v1.wanted = cpu_to_le32(__ceph_caps_wanted(ci));
rec.v1.issued = cpu_to_le32(cap->issued);
rec.v1.size = cpu_to_le64(inode->i_size);
ceph_encode_timespec(&rec.v1.mtime, &inode->i_mtime);
ceph_encode_timespec(&rec.v1.atime, &inode->i_atime);
rec.v1.snaprealm = cpu_to_le64(ci->i_snap_realm->ino);
rec.v1.pathbase = cpu_to_le64(pathbase);
reclen = sizeof(rec.v1);
}
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-30 17:47:09 +00:00
spin_unlock(&ci->i_ceph_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph: add flock/fcntl lock support Implement flock inode operation to support advisory file locking. All lock/unlock operations are synchronous with the MDS. Lock state is sent when reconnecting to a recovering MDS to restore the shared lock state. Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-02 22:34:23 +00:00
if (recon_state->flock) {
int num_fcntl_locks, num_flock_locks;
ceph: preallocate flock state without locks held When the lock_kernel() turns into lock_flocks() and a spinlock, we won't be able to do allocations with the lock held. Preallocate space without the lock, and retry if the lock state changes out from underneath us. Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-09-17 17:24:02 +00:00
struct ceph_pagelist_cursor trunc_point;
ceph_pagelist_set_cursor(pagelist, &trunc_point);
do {
ceph: switch from BKL to lock_flocks() Switch from using the BKL explicitly to the new lock_flocks() interface. Eventually this will turn into a spinlock. Signed-off-by: Sage Weil <sage@newdream.net>
2010-09-23 02:57:10 +00:00
lock_flocks();
ceph: preallocate flock state without locks held When the lock_kernel() turns into lock_flocks() and a spinlock, we won't be able to do allocations with the lock held. Preallocate space without the lock, and retry if the lock state changes out from underneath us. Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-09-17 17:24:02 +00:00
ceph_count_locks(inode, &num_fcntl_locks,
&num_flock_locks);
rec.v2.flock_len = (2*sizeof(u32) +
(num_fcntl_locks+num_flock_locks) *
sizeof(struct ceph_filelock));
ceph: switch from BKL to lock_flocks() Switch from using the BKL explicitly to the new lock_flocks() interface. Eventually this will turn into a spinlock. Signed-off-by: Sage Weil <sage@newdream.net>
2010-09-23 02:57:10 +00:00
unlock_flocks();
ceph: preallocate flock state without locks held When the lock_kernel() turns into lock_flocks() and a spinlock, we won't be able to do allocations with the lock held. Preallocate space without the lock, and retry if the lock state changes out from underneath us. Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-09-17 17:24:02 +00:00
/* pre-alloc pagelist */
ceph_pagelist_truncate(pagelist, &trunc_point);
err = ceph_pagelist_append(pagelist, &rec, reclen);
if (!err)
err = ceph_pagelist_reserve(pagelist,
rec.v2.flock_len);
/* encode locks */
if (!err) {
ceph: switch from BKL to lock_flocks() Switch from using the BKL explicitly to the new lock_flocks() interface. Eventually this will turn into a spinlock. Signed-off-by: Sage Weil <sage@newdream.net>
2010-09-23 02:57:10 +00:00
lock_flocks();
ceph: preallocate flock state without locks held When the lock_kernel() turns into lock_flocks() and a spinlock, we won't be able to do allocations with the lock held. Preallocate space without the lock, and retry if the lock state changes out from underneath us. Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-09-17 17:24:02 +00:00
err = ceph_encode_locks(inode,
pagelist,
num_fcntl_locks,
num_flock_locks);
ceph: switch from BKL to lock_flocks() Switch from using the BKL explicitly to the new lock_flocks() interface. Eventually this will turn into a spinlock. Signed-off-by: Sage Weil <sage@newdream.net>
2010-09-23 02:57:10 +00:00
unlock_flocks();
ceph: preallocate flock state without locks held When the lock_kernel() turns into lock_flocks() and a spinlock, we won't be able to do allocations with the lock held. Preallocate space without the lock, and retry if the lock state changes out from underneath us. Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-09-17 17:24:02 +00:00
}
} while (err == -ENOSPC);
ceph: fix reconnect encoding for old servers Fix the reconnect encoding to encode the cap record when the MDS does not have the FLOCK capability (i.e., pre v0.22). Signed-off-by: Sage Weil <sage@newdream.net>
2010-09-07 22:59:27 +00:00
} else {
err = ceph_pagelist_append(pagelist, &rec, reclen);
ceph: add flock/fcntl lock support Implement flock inode operation to support advisory file locking. All lock/unlock operations are synchronous with the MDS. Lock state is sent when reconnecting to a recovering MDS to restore the shared lock state. Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-02 22:34:23 +00:00
}
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-23 20:21:51 +00:00
ceph: don't BUG on ENOMEM during mds reconnect We are in a position to return an error; do that instead. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-26 16:26:37 +00:00
out_free:
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
kfree(path);
ceph: don't BUG on ENOMEM during mds reconnect We are in a position to return an error; do that instead. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-26 16:26:37 +00:00
out_dput:
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
dput(dentry);
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-23 20:21:51 +00:00
return err;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
/*
* If an MDS fails and recovers, clients need to reconnect in order to
* reestablish shared state. This includes all caps issued through
* this session _and_ the snap_realm hierarchy. Because it's not
* clear which snap realms the mds cares about, we send everything we
* know about.. that ensures we'll then get any new info the
* recovering MDS might have.
*
* This is a relatively heavyweight operation, but it's rare.
*
* called with mdsc->mutex held.
*/
ceph: clean up send_mds_reconnect interface Pass a ceph_mds_session, since the caller has it. Remove the dead code for sending empty reconnects. It used to be used when the MDS contacted _us_ to solicit a reconnect, and we could reply saying "go away, I have no session." Now we only send reconnects based on the mds map, and only when we do in fact have an open session. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-10 23:31:25 +00:00
static void send_mds_reconnect(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
{
struct ceph_msg *reply;
ceph: use rbtree for snap_realms Switch from radix tree to rbtree for snap realms. This is much more appropriate given that realm keys are few and far between. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-15 22:37:55 +00:00
struct rb_node *p;
ceph: clean up send_mds_reconnect interface Pass a ceph_mds_session, since the caller has it. Remove the dead code for sending empty reconnects. It used to be used when the MDS contacted _us_ to solicit a reconnect, and we could reply saying "go away, I have no session." Now we only send reconnects based on the mds map, and only when we do in fact have an open session. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-10 23:31:25 +00:00
int mds = session->s_mds;
ceph: fix locking for waking session requests after reconnect The session->s_waiting list is protected by mdsc->mutex, not s_mutex. This was causing (rare) s_waiting list corruption. Fix errors paths too, while we're here. A more thorough cleanup of this function is coming soon. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 04:58:38 +00:00
int err = -ENOMEM;
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-23 20:21:51 +00:00
struct ceph_pagelist *pagelist;
ceph: support v2 reconnect encoding Encode either old or v2 encoding of client_reconnect message, depending on whether the peer has the FLOCK feature bit. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-12 22:21:32 +00:00
struct ceph_reconnect_state recon_state;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph: clean up send_mds_reconnect interface Pass a ceph_mds_session, since the caller has it. Remove the dead code for sending empty reconnects. It used to be used when the MDS contacted _us_ to solicit a reconnect, and we could reply saying "go away, I have no session." Now we only send reconnects based on the mds map, and only when we do in fact have an open session. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-10 23:31:25 +00:00
pr_info("mds%d reconnect start\n", mds);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-23 20:21:51 +00:00
pagelist = kmalloc(sizeof(*pagelist), GFP_NOFS);
if (!pagelist)
goto fail_nopagelist;
ceph_pagelist_init(pagelist);
libceph: don't complain on msgpool alloc failures The pool allocation failures are masked by the pool; there is no need to spam the console about them. (That's the whole point of having the pool in the first place.) Mark msg allocations whose failure is safely handled as such. Signed-off-by: Sage Weil <sage@newdream.net>
2011-08-09 22:03:46 +00:00
reply = ceph_msg_new(CEPH_MSG_CLIENT_RECONNECT, 0, GFP_NOFS, false);
ceph: make ceph_msg_new return NULL on failure; clean up, fix callers Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure instead, and fix up the callers (about half of which were wrong anyway). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-01 23:06:19 +00:00
if (!reply)
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-23 20:21:51 +00:00
goto fail_nomsg;
ceph: clean up send_mds_reconnect interface Pass a ceph_mds_session, since the caller has it. Remove the dead code for sending empty reconnects. It used to be used when the MDS contacted _us_ to solicit a reconnect, and we could reply saying "go away, I have no session." Now we only send reconnects based on the mds map, and only when we do in fact have an open session. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-10 23:31:25 +00:00
mutex_lock(&session->s_mutex);
session->s_state = CEPH_MDS_SESSION_RECONNECTING;
session->s_seq = 0;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph: close old con before reopening on mds reconnect When we detect a mds session reset, close the old ceph_connection before reopening it. This ensures we clean up the old socket properly and keep the ceph_connection state correct. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-07-30 23:21:17 +00:00
ceph_con_close(&session->s_con);
ceph: clean up send_mds_reconnect interface Pass a ceph_mds_session, since the caller has it. Remove the dead code for sending empty reconnects. It used to be used when the MDS contacted _us_ to solicit a reconnect, and we could reply saying "go away, I have no session." Now we only send reconnects based on the mds map, and only when we do in fact have an open session. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-10 23:31:25 +00:00
ceph_con_open(&session->s_con,
libceph: set peer name on con_open, not init The peer name may change on each open attempt, even when the connection is reused. Signed-off-by: Sage Weil <sage@inktank.com>
2012-06-27 19:24:08 +00:00
CEPH_ENTITY_TYPE_MDS, mds,
ceph: clean up send_mds_reconnect interface Pass a ceph_mds_session, since the caller has it. Remove the dead code for sending empty reconnects. It used to be used when the MDS contacted _us_ to solicit a reconnect, and we could reply saying "go away, I have no session." Now we only send reconnects based on the mds map, and only when we do in fact have an open session. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-10 23:31:25 +00:00
ceph_mdsmap_get_addr(mdsc->mdsmap, mds));
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph: clean up send_mds_reconnect interface Pass a ceph_mds_session, since the caller has it. Remove the dead code for sending empty reconnects. It used to be used when the MDS contacted _us_ to solicit a reconnect, and we could reply saying "go away, I have no session." Now we only send reconnects based on the mds map, and only when we do in fact have an open session. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-10 23:31:25 +00:00
/* replay unsafe requests */
replay_unsafe_requests(mdsc, session);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
down_read(&mdsc->snap_rwsem);
dout("session %p state %s\n", session,
session_state_name(session->s_state));
ceph: dicard cap releases on mds restart If the MDS restarts, the expire caps state is no longer shared, and can be thrown out. Caps state will be rebuilt on the MDS during the reconnect process that follows. Zero out any release messages and adjust the release counter accordingly. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-10 22:36:44 +00:00
/* drop old cap expires; we're about to reestablish that state */
discard_cap_releases(mdsc, session);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
/* traverse this session's caps */
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-23 20:21:51 +00:00
err = ceph_pagelist_encode_32(pagelist, session->s_nr_caps);
if (err)
goto fail;
ceph: support v2 reconnect encoding Encode either old or v2 encoding of client_reconnect message, depending on whether the peer has the FLOCK feature bit. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-12 22:21:32 +00:00
recon_state.pagelist = pagelist;
recon_state.flock = session->s_con.peer_features & CEPH_FEATURE_FLOCK;
err = iterate_session_caps(session, encode_caps_cb, &recon_state);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
if (err < 0)
ceph: fix locking for waking session requests after reconnect The session->s_waiting list is protected by mdsc->mutex, not s_mutex. This was causing (rare) s_waiting list corruption. Fix errors paths too, while we're here. A more thorough cleanup of this function is coming soon. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 04:58:38 +00:00
goto fail;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
/*
* snaprealms. we provide mds with the ino, seq (version), and
* parent for all of our realms. If the mds has any newer info,
* it will tell us.
*/
ceph: use rbtree for snap_realms Switch from radix tree to rbtree for snap realms. This is much more appropriate given that realm keys are few and far between. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-15 22:37:55 +00:00
for (p = rb_first(&mdsc->snap_realms); p; p = rb_next(p)) {
struct ceph_snap_realm *realm =
rb_entry(p, struct ceph_snap_realm, node);
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-23 20:21:51 +00:00
struct ceph_mds_snaprealm_reconnect sr_rec;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
dout(" adding snap realm %llx seq %lld parent %llx\n",
realm->ino, realm->seq, realm->parent_ino);
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-23 20:21:51 +00:00
sr_rec.ino = cpu_to_le64(realm->ino);
sr_rec.seq = cpu_to_le64(realm->seq);
sr_rec.parent = cpu_to_le64(realm->parent_ino);
err = ceph_pagelist_append(pagelist, &sr_rec, sizeof(sr_rec));
if (err)
goto fail;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-23 20:21:51 +00:00
reply->pagelist = pagelist;
ceph: support v2 reconnect encoding Encode either old or v2 encoding of client_reconnect message, depending on whether the peer has the FLOCK feature bit. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-12 22:21:32 +00:00
if (recon_state.flock)
reply->hdr.version = cpu_to_le16(2);
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-23 20:21:51 +00:00
reply->hdr.data_len = cpu_to_le32(pagelist->length);
reply->nr_pages = calc_pages_for(0, pagelist->length);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph_con_send(&session->s_con, reply);
ceph: fix locking for waking session requests after reconnect The session->s_waiting list is protected by mdsc->mutex, not s_mutex. This was causing (rare) s_waiting list corruption. Fix errors paths too, while we're here. A more thorough cleanup of this function is coming soon. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 04:58:38 +00:00
mutex_unlock(&session->s_mutex);
mutex_lock(&mdsc->mutex);
__wake_requests(mdsc, &session->s_waiting);
mutex_unlock(&mdsc->mutex);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
up_read(&mdsc->snap_rwsem);
return;
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-23 20:21:51 +00:00
fail:
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph_msg_put(reply);
ceph: fix locking for waking session requests after reconnect The session->s_waiting list is protected by mdsc->mutex, not s_mutex. This was causing (rare) s_waiting list corruption. Fix errors paths too, while we're here. A more thorough cleanup of this function is coming soon. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 04:58:38 +00:00
up_read(&mdsc->snap_rwsem);
mutex_unlock(&session->s_mutex);
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-23 20:21:51 +00:00
fail_nomsg:
ceph_pagelist_release(pagelist);
kfree(pagelist);
fail_nopagelist:
ceph: fix locking for waking session requests after reconnect The session->s_waiting list is protected by mdsc->mutex, not s_mutex. This was causing (rare) s_waiting list corruption. Fix errors paths too, while we're here. A more thorough cleanup of this function is coming soon. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 04:58:38 +00:00
pr_err("error %d preparing reconnect for mds%d\n", err, mds);
return;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
/*
* compare old and new mdsmaps, kicking requests
* and closing out old connections as necessary
*
* called under mdsc->mutex.
*/
static void check_new_map(struct ceph_mds_client *mdsc,
struct ceph_mdsmap *newmap,
struct ceph_mdsmap *oldmap)
{
int i;
int oldstate, newstate;
struct ceph_mds_session *s;
dout("check_new_map new %u old %u\n",
newmap->m_epoch, oldmap->m_epoch);
for (i = 0; i < oldmap->m_max_mds && i < mdsc->max_sessions; i++) {
if (mdsc->sessions[i] == NULL)
continue;
s = mdsc->sessions[i];
oldstate = ceph_mdsmap_get_state(oldmap, i);
newstate = ceph_mdsmap_get_state(newmap, i);
ceph: track laggy state of mds from mdsmap Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-17 21:19:01 +00:00
dout("check_new_map mds%d state %s%s -> %s%s (session %s)\n",
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
i, ceph_mds_state_name(oldstate),
ceph: track laggy state of mds from mdsmap Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-17 21:19:01 +00:00
ceph_mdsmap_is_laggy(oldmap, i) ? " (laggy)" : "",
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph_mds_state_name(newstate),
ceph: track laggy state of mds from mdsmap Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-17 21:19:01 +00:00
ceph_mdsmap_is_laggy(newmap, i) ? " (laggy)" : "",
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
session_state_name(s->s_state));
ceph: Fix oops when handling mdsmap that decreases max_mds When i >= newmap->m_max_mds, ceph_mdsmap_get_addr(newmap, i) return NULL. Passing NULL to memcmp() triggers oops. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2012-09-20 09:42:25 +00:00
if (i >= newmap->m_max_mds ||
memcmp(ceph_mdsmap_get_addr(oldmap, i),
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph_mdsmap_get_addr(newmap, i),
sizeof(struct ceph_entity_addr))) {
if (s->s_state == CEPH_MDS_SESSION_OPENING) {
/* the session never opened, just close it
* out now */
__wake_requests(mdsc, &s->s_waiting);
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-22 23:12:16 +00:00
__unregister_session(mdsc, s);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
} else {
/* just close it */
mutex_unlock(&mdsc->mutex);
mutex_lock(&s->s_mutex);
mutex_lock(&mdsc->mutex);
ceph_con_close(&s->s_con);
mutex_unlock(&s->s_mutex);
s->s_state = CEPH_MDS_SESSION_RESTARTING;
}
/* kick any requests waiting on the recovering mds */
ceph: wait for mds OPEN reply to indicate reconnect success We used to infer reconnect success by watching the MDS state, essentially assuming that hearing nothing meant things were ok. That wasn't particularly reliable. Instead, the MDS replies with an explicit OPEN message to indicate success. Strictly speaking, this is a protocol change, but it is a backwards compatible one that does not break new clients + old servers or old clients + new servers. At least not yet. Drop unused @all argument from kick_requests while we're at it. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-18 21:45:05 +00:00
kick_requests(mdsc, i);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
} else if (oldstate == newstate) {
continue; /* nothing new with this mds */
}
/*
* send reconnect?
*/
if (s->s_state == CEPH_MDS_SESSION_RESTARTING &&
ceph: clean up send_mds_reconnect interface Pass a ceph_mds_session, since the caller has it. Remove the dead code for sending empty reconnects. It used to be used when the MDS contacted _us_ to solicit a reconnect, and we could reply saying "go away, I have no session." Now we only send reconnects based on the mds map, and only when we do in fact have an open session. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-10 23:31:25 +00:00
newstate >= CEPH_MDS_STATE_RECONNECT) {
mutex_unlock(&mdsc->mutex);
send_mds_reconnect(mdsc, s);
mutex_lock(&mdsc->mutex);
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
/*
ceph: wait for mds OPEN reply to indicate reconnect success We used to infer reconnect success by watching the MDS state, essentially assuming that hearing nothing meant things were ok. That wasn't particularly reliable. Instead, the MDS replies with an explicit OPEN message to indicate success. Strictly speaking, this is a protocol change, but it is a backwards compatible one that does not break new clients + old servers or old clients + new servers. At least not yet. Drop unused @all argument from kick_requests while we're at it. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-18 21:45:05 +00:00
* kick request on any mds that has gone active.
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
*/
if (oldstate < CEPH_MDS_STATE_ACTIVE &&
newstate >= CEPH_MDS_STATE_ACTIVE) {
ceph: wait for mds OPEN reply to indicate reconnect success We used to infer reconnect success by watching the MDS state, essentially assuming that hearing nothing meant things were ok. That wasn't particularly reliable. Instead, the MDS replies with an explicit OPEN message to indicate success. Strictly speaking, this is a protocol change, but it is a backwards compatible one that does not break new clients + old servers or old clients + new servers. At least not yet. Drop unused @all argument from kick_requests while we're at it. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-18 21:45:05 +00:00
if (oldstate != CEPH_MDS_STATE_CREATING &&
oldstate != CEPH_MDS_STATE_STARTING)
pr_info("mds%d recovery completed\n", s->s_mds);
kick_requests(mdsc, i);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph_kick_flushing_caps(mdsc, s);
ceph: reset requested max_size after mds reconnect The max_size increase request to the MDS can get lost during an MDS restart and reconnect. Reset our requested value after the MDS recovers, so that any blocked writes will re-request a larger max_size upon waking. Also, explicit wake session caps after the reconnect. Normally the cap renewal catches this, but not in the cases where the caps didn't go stale in the first place, which would leave writers waiting on max_size asleep. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-20 21:43:45 +00:00
wake_up_session_caps(s, 1);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
}
ceph: connect to export targets if mds is laggy If an MDS we are talking to may have failed, we need to open sessions to its potential export targets to ensure that any in-progress migration that may have involved some of our caps is properly handled. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-21 20:38:35 +00:00
for (i = 0; i < newmap->m_max_mds && i < mdsc->max_sessions; i++) {
s = mdsc->sessions[i];
if (!s)
continue;
if (!ceph_mdsmap_is_laggy(newmap, i))
continue;
if (s->s_state == CEPH_MDS_SESSION_OPEN ||
s->s_state == CEPH_MDS_SESSION_HUNG ||
s->s_state == CEPH_MDS_SESSION_CLOSING) {
dout(" connecting to export targets of laggy mds%d\n",
i);
__open_export_target_sessions(mdsc, s);
}
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
/*
* leases
*/
/*
* caller must hold session s_mutex, dentry->d_lock
*/
void __ceph_mdsc_drop_dentry_lease(struct dentry *dentry)
{
struct ceph_dentry_info *di = ceph_dentry(dentry);
ceph_put_mds_session(di->lease_session);
di->lease_session = NULL;
}
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-22 23:12:16 +00:00
static void handle_lease(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session,
struct ceph_msg *msg)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
struct super_block *sb = mdsc->fsc->sb;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
struct inode *inode;
struct dentry *parent, *dentry;
struct ceph_dentry_info *di;
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-22 23:12:16 +00:00
int mds = session->s_mds;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
struct ceph_mds_lease *h = msg->front.iov_base;
ceph: fix lease revocation when seq doesn't match If the client revokes a lease with a higher seq than what we have, keep the mds's seq, so that it honors our release. Otherwise, we can hang indefinitely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-04 17:05:40 +00:00
u32 seq;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
struct ceph_vino vino;
struct qstr dname;
int release = 0;
dout("handle_lease from mds%d\n", mds);
/* decode */
if (msg->front.iov_len < sizeof(*h) + sizeof(u32))
goto bad;
vino.ino = le64_to_cpu(h->ino);
vino.snap = CEPH_NOSNAP;
ceph: fix lease revocation when seq doesn't match If the client revokes a lease with a higher seq than what we have, keep the mds's seq, so that it honors our release. Otherwise, we can hang indefinitely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-04 17:05:40 +00:00
seq = le32_to_cpu(h->seq);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
dname.name = (void *)h + sizeof(*h) + sizeof(u32);
dname.len = msg->front.iov_len - sizeof(*h) - sizeof(u32);
if (dname.len != get_unaligned_le32(h+1))
goto bad;
mutex_lock(&session->s_mutex);
session->s_seq++;
/* lookup inode */
inode = ceph_find_inode(sb, vino);
ceph: ignore lease mask The lease mask is no longer used (and it changed a while back). Instead, use a non-zero duration to indicate that there is a lease being issued. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26 18:28:25 +00:00
dout("handle_lease %s, ino %llx %p %.*s\n",
ceph_lease_op_name(h->action), vino.ino, inode,
ceph: fix lease revocation when seq doesn't match If the client revokes a lease with a higher seq than what we have, keep the mds's seq, so that it honors our release. Otherwise, we can hang indefinitely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-04 17:05:40 +00:00
dname.len, dname.name);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
if (inode == NULL) {
dout("handle_lease no inode %llx\n", vino.ino);
goto release;
}
/* dentry */
parent = d_find_alias(inode);
if (!parent) {
dout("no parent dentry on inode %p\n", inode);
WARN_ON(1);
goto release; /* hrm... */
}
dname.hash = full_name_hash(dname.name, dname.len);
dentry = d_lookup(parent, &dname);
dput(parent);
if (!dentry)
goto release;
spin_lock(&dentry->d_lock);
di = ceph_dentry(dentry);
switch (h->action) {
case CEPH_MDS_LEASE_REVOKE:
ceph: remove unnecessary d_fsdata conditional checks We now set d_fsdata unconditionally on all dentries prior to setting up the d_ops, so all of these checks are unnecessary. Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-11 17:48:53 +00:00
if (di->lease_session == session) {
ceph: fix lease revocation when seq doesn't match If the client revokes a lease with a higher seq than what we have, keep the mds's seq, so that it honors our release. Otherwise, we can hang indefinitely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-04 17:05:40 +00:00
if (ceph_seq_cmp(di->lease_seq, seq) > 0)
h->seq = cpu_to_le32(di->lease_seq);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
__ceph_mdsc_drop_dentry_lease(dentry);
}
release = 1;
break;
case CEPH_MDS_LEASE_RENEW:
ceph: remove unnecessary d_fsdata conditional checks We now set d_fsdata unconditionally on all dentries prior to setting up the d_ops, so all of these checks are unnecessary. Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-11 17:48:53 +00:00
if (di->lease_session == session &&
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
di->lease_gen == session->s_cap_gen &&
di->lease_renew_from &&
di->lease_renew_after == 0) {
unsigned long duration =
le32_to_cpu(h->duration_ms) * HZ / 1000;
ceph: fix lease revocation when seq doesn't match If the client revokes a lease with a higher seq than what we have, keep the mds's seq, so that it honors our release. Otherwise, we can hang indefinitely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-04 17:05:40 +00:00
di->lease_seq = seq;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
dentry->d_time = di->lease_renew_from + duration;
di->lease_renew_after = di->lease_renew_from +
(duration >> 1);
di->lease_renew_from = 0;
}
break;
}
spin_unlock(&dentry->d_lock);
dput(dentry);
if (!release)
goto out;
release:
/* let's just reuse the same message */
h->action = CEPH_MDS_LEASE_REVOKE_ACK;
ceph_msg_get(msg);
ceph_con_send(&session->s_con, msg);
out:
iput(inode);
mutex_unlock(&session->s_mutex);
return;
bad:
pr_err("corrupt lease message\n");
ceph: hex dump corrupt server data to KERN_DEBUG Also, print fsid using standard format, NOT hex dump. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-14 23:13:47 +00:00
ceph_msg_dump(msg);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
void ceph_mdsc_lease_send_msg(struct ceph_mds_session *session,
struct inode *inode,
struct dentry *dentry, char action,
u32 seq)
{
struct ceph_msg *msg;
struct ceph_mds_lease *lease;
int len = sizeof(*lease) + sizeof(u32);
int dnamelen = 0;
dout("lease_send_msg inode %p dentry %p %s to mds%d\n",
inode, dentry, ceph_lease_op_name(action), session->s_mds);
dnamelen = dentry->d_name.len;
len += dnamelen;
libceph: don't complain on msgpool alloc failures The pool allocation failures are masked by the pool; there is no need to spam the console about them. (That's the whole point of having the pool in the first place.) Mark msg allocations whose failure is safely handled as such. Signed-off-by: Sage Weil <sage@newdream.net>
2011-08-09 22:03:46 +00:00
msg = ceph_msg_new(CEPH_MSG_CLIENT_LEASE, len, GFP_NOFS, false);
ceph: make ceph_msg_new return NULL on failure; clean up, fix callers Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure instead, and fix up the callers (about half of which were wrong anyway). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-01 23:06:19 +00:00
if (!msg)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
return;
lease = msg->front.iov_base;
lease->action = action;
lease->ino = cpu_to_le64(ceph_vino(inode).ino);
lease->first = lease->last = cpu_to_le64(ceph_vino(inode).snap);
lease->seq = cpu_to_le32(seq);
put_unaligned_le32(dnamelen, lease + 1);
memcpy((void *)(lease + 1) + 4, dentry->d_name.name, dnamelen);
/*
* if this is a preemptive lease RELEASE, no need to
* flush request stream, since the actual request will
* soon follow.
*/
msg->more_to_follow = (action == CEPH_MDS_LEASE_RELEASE);
ceph_con_send(&session->s_con, msg);
}
/*
* Preemptively release a lease we expect to invalidate anyway.
* Pass @inode always, @dentry is optional.
*/
void ceph_mdsc_lease_release(struct ceph_mds_client *mdsc, struct inode *inode,
ceph: ignore lease mask The lease mask is no longer used (and it changed a while back). Instead, use a non-zero duration to indicate that there is a lease being issued. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26 18:28:25 +00:00
struct dentry *dentry)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
{
struct ceph_dentry_info *di;
struct ceph_mds_session *session;
u32 seq;
BUG_ON(inode == NULL);
BUG_ON(dentry == NULL);
/* is dentry lease valid? */
spin_lock(&dentry->d_lock);
di = ceph_dentry(dentry);
if (!di || !di->lease_session ||
di->lease_session->s_mds < 0 ||
di->lease_gen != di->lease_session->s_cap_gen ||
!time_before(jiffies, dentry->d_time)) {
dout("lease_release inode %p dentry %p -- "
ceph: ignore lease mask The lease mask is no longer used (and it changed a while back). Instead, use a non-zero duration to indicate that there is a lease being issued. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26 18:28:25 +00:00
"no lease\n",
inode, dentry);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
spin_unlock(&dentry->d_lock);
return;
}
/* we do have a lease on this dentry; note mds and seq */
session = ceph_get_mds_session(di->lease_session);
seq = di->lease_seq;
__ceph_mdsc_drop_dentry_lease(dentry);
spin_unlock(&dentry->d_lock);
ceph: ignore lease mask The lease mask is no longer used (and it changed a while back). Instead, use a non-zero duration to indicate that there is a lease being issued. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26 18:28:25 +00:00
dout("lease_release inode %p dentry %p to mds%d\n",
inode, dentry, session->s_mds);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph_mdsc_lease_send_msg(session, inode, dentry,
CEPH_MDS_LEASE_RELEASE, seq);
ceph_put_mds_session(session);
}
/*
* drop all leases (and dentry refs) in preparation for umount
*/
static void drop_leases(struct ceph_mds_client *mdsc)
{
int i;
dout("drop_leases\n");
mutex_lock(&mdsc->mutex);
for (i = 0; i < mdsc->max_sessions; i++) {
struct ceph_mds_session *s = __ceph_lookup_mds_session(mdsc, i);
if (!s)
continue;
mutex_unlock(&mdsc->mutex);
mutex_lock(&s->s_mutex);
mutex_unlock(&s->s_mutex);
ceph_put_mds_session(s);
mutex_lock(&mdsc->mutex);
}
mutex_unlock(&mdsc->mutex);
}
/*
* delayed work -- periodically trim expired leases, renew caps with mds
*/
static void schedule_delayed(struct ceph_mds_client *mdsc)
{
int delay = 5;
unsigned hz = round_jiffies_relative(HZ * delay);
schedule_delayed_work(&mdsc->delayed_work, hz);
}
static void delayed_work(struct work_struct *work)
{
int i;
struct ceph_mds_client *mdsc =
container_of(work, struct ceph_mds_client, delayed_work.work);
int renew_interval;
int renew_caps;
dout("mdsc delayed_work\n");
ceph: flush dirty caps via the cap_dirty list Previously we were flushing dirty caps by passing an extra flag when traversing the delayed caps list. Besides being a bit ugly, that can also miss caps that are dirty but didn't result in a cap requeue: notably, mark_caps_dirty(). Separate the flushing into a separate helper, and traverse the cap_dirty list. This also brings i_dirty_item in line with i_dirty_caps: we are on the list IFF caps != 0. We carry an inode ref IFF dirty_caps|flushing_caps != 0. Lose the unused return value from __ceph_mark_caps_dirty(). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-14 21:27:38 +00:00
ceph_check_delayed_caps(mdsc);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
mutex_lock(&mdsc->mutex);
renew_interval = mdsc->mdsmap->m_session_timeout >> 2;
renew_caps = time_after_eq(jiffies, HZ*renew_interval +
mdsc->last_renew_caps);
if (renew_caps)
mdsc->last_renew_caps = jiffies;
for (i = 0; i < mdsc->max_sessions; i++) {
struct ceph_mds_session *s = __ceph_lookup_mds_session(mdsc, i);
if (s == NULL)
continue;
if (s->s_state == CEPH_MDS_SESSION_CLOSING) {
dout("resending session close request for mds%d\n",
s->s_mds);
request_close_session(mdsc, s);
ceph_put_mds_session(s);
continue;
}
if (s->s_ttl && time_after(jiffies, s->s_ttl)) {
if (s->s_state == CEPH_MDS_SESSION_OPEN) {
s->s_state = CEPH_MDS_SESSION_HUNG;
pr_info("mds%d hung\n", s->s_mds);
}
}
if (s->s_state < CEPH_MDS_SESSION_OPEN) {
/* this mds is failed or recovering, just wait */
ceph_put_mds_session(s);
continue;
}
mutex_unlock(&mdsc->mutex);
mutex_lock(&s->s_mutex);
if (renew_caps)
send_renew_caps(mdsc, s);
else
ceph_con_keepalive(&s->s_con);
ceph: drop unused argument Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-10 19:55:52 +00:00
ceph_add_cap_releases(mdsc, s);
ceph: only send cap releases when mds is OPEN|HUNG On OPENING we shouldn't have any caps (or releases). On CLOSING, we should wait until we succeed (and throw it all out), or don't (and are OPEN again). On RECONNECTING we can wait until we are OPEN. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-17 23:30:21 +00:00
if (s->s_state == CEPH_MDS_SESSION_OPEN ||
s->s_state == CEPH_MDS_SESSION_HUNG)
ceph: release cap on import if we don't have the inode If we get an IMPORT that give us a cap, but we don't have the inode, queue a release (and try to send it immediately) so that the MDS doesn't get stuck waiting for us. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-09 23:47:10 +00:00
ceph_send_cap_releases(mdsc, s);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
mutex_unlock(&s->s_mutex);
ceph_put_mds_session(s);
mutex_lock(&mdsc->mutex);
}
mutex_unlock(&mdsc->mutex);
schedule_delayed(mdsc);
}
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
int ceph_mdsc_init(struct ceph_fs_client *fsc)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
struct ceph_mds_client *mdsc;
mdsc = kzalloc(sizeof(struct ceph_mds_client), GFP_NOFS);
if (!mdsc)
return -ENOMEM;
mdsc->fsc = fsc;
fsc->mdsc = mdsc;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
mutex_init(&mdsc->mutex);
mdsc->mdsmap = kzalloc(sizeof(*mdsc->mdsmap), GFP_NOFS);
ceph: handle kzalloc() failure Signed-off-by: Cheng Renquan <crquan@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-26 10:04:40 +00:00
if (mdsc->mdsmap == NULL)
return -ENOMEM;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
init_completion(&mdsc->safe_umount_waiters);
ceph: fix multiple mds session shutdown The use of a completion when waiting for session shutdown during umount is inappropriate, given the complexity of the condition. For multiple MDS's, this resulted in the umount thread spinning, often preventing the session close message from being processed in some cases. Switch to a waitqueue and defined a condition helper. This cleans things up nicely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-11 21:51:23 +00:00
init_waitqueue_head(&mdsc->session_close_wq);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
INIT_LIST_HEAD(&mdsc->waiting_for_map);
mdsc->sessions = NULL;
mdsc->max_sessions = 0;
mdsc->stopping = 0;
init_rwsem(&mdsc->snap_rwsem);
ceph: use rbtree for snap_realms Switch from radix tree to rbtree for snap realms. This is much more appropriate given that realm keys are few and far between. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-15 22:37:55 +00:00
mdsc->snap_realms = RB_ROOT;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
INIT_LIST_HEAD(&mdsc->snap_empty);
spin_lock_init(&mdsc->snap_empty_lock);
mdsc->last_tid = 0;
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-15 20:08:46 +00:00
mdsc->request_tree = RB_ROOT;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
INIT_DELAYED_WORK(&mdsc->delayed_work, delayed_work);
mdsc->last_renew_caps = jiffies;
INIT_LIST_HEAD(&mdsc->cap_delay_list);
spin_lock_init(&mdsc->cap_delay_lock);
INIT_LIST_HEAD(&mdsc->snap_flush_list);
spin_lock_init(&mdsc->snap_flush_lock);
mdsc->cap_flush_seq = 0;
INIT_LIST_HEAD(&mdsc->cap_dirty);
ceph: fix cap flush race reentrancy In e9964c10 we change cap flushing to do a delicate dance because some inodes on the cap_dirty list could be in a migrating state (got EXPORT but not IMPORT) in which we couldn't actually flush and move from dirty->flushing, breaking the while (!empty) { process first } loop structure. It worked for a single sync thread, but was not reentrant and triggered infinite loops when multiple syncers came along. Instead, move inodes with dirty to a separate cap_dirty_migrating list when in the limbo export-but-no-import state, allowing us to go back to the simple loop structure (which was reentrant). This is cleaner and more robust. Audited the cap_dirty users and this looks fine: list_empty(&ci->i_dirty_item) is still a reliable indicator of whether we have dirty caps (which list we're on is irrelevant) and list_del_init() calls still do the right thing. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-24 18:46:31 +00:00
INIT_LIST_HEAD(&mdsc->cap_dirty_migrating);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
mdsc->num_cap_flushing = 0;
spin_lock_init(&mdsc->cap_dirty_lock);
init_waitqueue_head(&mdsc->cap_flushing_wq);
spin_lock_init(&mdsc->dentry_lru_lock);
INIT_LIST_HEAD(&mdsc->dentry_lru);
ceph: handle kzalloc() failure Signed-off-by: Cheng Renquan <crquan@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-26 10:04:40 +00:00
ceph: do caps accounting per mds_client Caps related accounting is now being done per mds client instead of just being global. This prepares ground work for a later revision of the caps preallocated reservation list. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-17 23:16:12 +00:00
ceph_caps_init(mdsc);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
ceph_adjust_min_caps(mdsc, fsc->min_caps);
ceph: do caps accounting per mds_client Caps related accounting is now being done per mds client instead of just being global. This prepares ground work for a later revision of the caps preallocated reservation list. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-17 23:16:12 +00:00
ceph: handle errors during osd client init Unwind initializing if we get ENOMEM during client initialization. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-18 22:52:18 +00:00
return 0;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
/*
* Wait for safe replies on open mds requests. If we time out, drop
* all requests from the tree to avoid dangling dentry refs.
*/
static void wait_requests(struct ceph_mds_client *mdsc)
{
struct ceph_mds_request *req;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
struct ceph_fs_client *fsc = mdsc->fsc;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
mutex_lock(&mdsc->mutex);
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-15 20:08:46 +00:00
if (__get_oldest_req(mdsc)) {
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
mutex_unlock(&mdsc->mutex);
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-15 20:08:46 +00:00
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
dout("wait_requests waiting for requests\n");
wait_for_completion_timeout(&mdsc->safe_umount_waiters,
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
fsc->client->options->mount_timeout * HZ);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
/* tear down remaining requests */
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-15 20:08:46 +00:00
mutex_lock(&mdsc->mutex);
while ((req = __get_oldest_req(mdsc))) {
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
dout("wait_requests timed out on tid %llu\n",
req->r_tid);
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-15 20:08:46 +00:00
__unregister_request(mdsc, req);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
}
mutex_unlock(&mdsc->mutex);
dout("wait_requests done\n");
}
/*
* called before mount is ro, and before dentries are torn down.
* (hmm, does this still race with new lookups?)
*/
void ceph_mdsc_pre_umount(struct ceph_mds_client *mdsc)
{
dout("pre_umount\n");
mdsc->stopping = 1;
drop_leases(mdsc);
ceph: flush dirty caps via the cap_dirty list Previously we were flushing dirty caps by passing an extra flag when traversing the delayed caps list. Besides being a bit ugly, that can also miss caps that are dirty but didn't result in a cap requeue: notably, mark_caps_dirty(). Separate the flushing into a separate helper, and traverse the cap_dirty list. This also brings i_dirty_item in line with i_dirty_caps: we are on the list IFF caps != 0. We carry an inode ref IFF dirty_caps|flushing_caps != 0. Lose the unused return value from __ceph_mark_caps_dirty(). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-14 21:27:38 +00:00
ceph_flush_dirty_caps(mdsc);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
wait_requests(mdsc);
ceph: delay umount until all mds requests drop inode+dentry refs This fixes a race between handle_reply finishing an mds request, signalling completion, and then dropping the request structing and its dentry+inode refs, and pre_umount function waiting for requests to finish before letting the vfs tear down the dcache. If umount was delayed waiting for mds requests, we could race and BUG in shrink_dcache_for_umount_subtree because of a slow dput. This delays umount until the msgr queue flushes, which means handle_reply will exit and will have dropped the ceph_mds_request struct. I'm assuming the VFS has already ensured that its calls have all completed and those request refs have thus been dropped as well (I haven't seen that race, at least). Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-21 23:12:26 +00:00
/*
* wait for reply handlers to drop their request refs and
* their inode/dcache refs
*/
ceph_msgr_flush();
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
/*
* wait for all write mds requests to flush.
*/
static void wait_unsafe_requests(struct ceph_mds_client *mdsc, u64 want_tid)
{
ceph: fix mds sync() race with completing requests The wait_unsafe_requests() helper dropped the mdsc mutex to wait for each request to complete, and then examined r_node to get the next request after retaking the lock. But the request completion removes the request from the tree, so r_node was always undefined at this point. Since it's a small race, it usually led to a valid request, but not always. The result was an occasional crash in rb_next() while dereferencing node->rb_left. Fix this by clearing the rb_node when removing the request from the request tree, and not walking off into the weeds when we are done waiting for a request. Since the request we waited on will _always_ be out of the request tree, take a ref on the next request, in the hopes that it won't be. But if it is, it's ok: we can start over from the beginning (and traverse over older read requests again). Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-16 22:28:54 +00:00
struct ceph_mds_request *req = NULL, *nextreq;
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-15 20:08:46 +00:00
struct rb_node *n;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
mutex_lock(&mdsc->mutex);
dout("wait_unsafe_requests want %lld\n", want_tid);
ceph: fix mds sync() race with completing requests The wait_unsafe_requests() helper dropped the mdsc mutex to wait for each request to complete, and then examined r_node to get the next request after retaking the lock. But the request completion removes the request from the tree, so r_node was always undefined at this point. Since it's a small race, it usually led to a valid request, but not always. The result was an occasional crash in rb_next() while dereferencing node->rb_left. Fix this by clearing the rb_node when removing the request from the request tree, and not walking off into the weeds when we are done waiting for a request. Since the request we waited on will _always_ be out of the request tree, take a ref on the next request, in the hopes that it won't be. But if it is, it's ok: we can start over from the beginning (and traverse over older read requests again). Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-16 22:28:54 +00:00
restart:
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-15 20:08:46 +00:00
req = __get_oldest_req(mdsc);
while (req && req->r_tid <= want_tid) {
ceph: fix mds sync() race with completing requests The wait_unsafe_requests() helper dropped the mdsc mutex to wait for each request to complete, and then examined r_node to get the next request after retaking the lock. But the request completion removes the request from the tree, so r_node was always undefined at this point. Since it's a small race, it usually led to a valid request, but not always. The result was an occasional crash in rb_next() while dereferencing node->rb_left. Fix this by clearing the rb_node when removing the request from the request tree, and not walking off into the weeds when we are done waiting for a request. Since the request we waited on will _always_ be out of the request tree, take a ref on the next request, in the hopes that it won't be. But if it is, it's ok: we can start over from the beginning (and traverse over older read requests again). Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-16 22:28:54 +00:00
/* find next request */
n = rb_next(&req->r_node);
if (n)
nextreq = rb_entry(n, struct ceph_mds_request, r_node);
else
nextreq = NULL;
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-15 20:08:46 +00:00
if ((req->r_op & CEPH_MDS_OP_WRITE)) {
/* write op */
ceph_mdsc_get_request(req);
ceph: fix mds sync() race with completing requests The wait_unsafe_requests() helper dropped the mdsc mutex to wait for each request to complete, and then examined r_node to get the next request after retaking the lock. But the request completion removes the request from the tree, so r_node was always undefined at this point. Since it's a small race, it usually led to a valid request, but not always. The result was an occasional crash in rb_next() while dereferencing node->rb_left. Fix this by clearing the rb_node when removing the request from the request tree, and not walking off into the weeds when we are done waiting for a request. Since the request we waited on will _always_ be out of the request tree, take a ref on the next request, in the hopes that it won't be. But if it is, it's ok: we can start over from the beginning (and traverse over older read requests again). Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-16 22:28:54 +00:00
if (nextreq)
ceph_mdsc_get_request(nextreq);
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-15 20:08:46 +00:00
mutex_unlock(&mdsc->mutex);
dout("wait_unsafe_requests wait on %llu (want %llu)\n",
req->r_tid, want_tid);
wait_for_completion(&req->r_safe_completion);
mutex_lock(&mdsc->mutex);
ceph_mdsc_put_request(req);
ceph: fix mds sync() race with completing requests The wait_unsafe_requests() helper dropped the mdsc mutex to wait for each request to complete, and then examined r_node to get the next request after retaking the lock. But the request completion removes the request from the tree, so r_node was always undefined at this point. Since it's a small race, it usually led to a valid request, but not always. The result was an occasional crash in rb_next() while dereferencing node->rb_left. Fix this by clearing the rb_node when removing the request from the request tree, and not walking off into the weeds when we are done waiting for a request. Since the request we waited on will _always_ be out of the request tree, take a ref on the next request, in the hopes that it won't be. But if it is, it's ok: we can start over from the beginning (and traverse over older read requests again). Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-16 22:28:54 +00:00
if (!nextreq)
break; /* next dne before, so we're done! */
if (RB_EMPTY_NODE(&nextreq->r_node)) {
/* next request was removed from tree */
ceph_mdsc_put_request(nextreq);
goto restart;
}
ceph_mdsc_put_request(nextreq); /* won't go away */
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-15 20:08:46 +00:00
}
ceph: fix mds sync() race with completing requests The wait_unsafe_requests() helper dropped the mdsc mutex to wait for each request to complete, and then examined r_node to get the next request after retaking the lock. But the request completion removes the request from the tree, so r_node was always undefined at this point. Since it's a small race, it usually led to a valid request, but not always. The result was an occasional crash in rb_next() while dereferencing node->rb_left. Fix this by clearing the rb_node when removing the request from the request tree, and not walking off into the weeds when we are done waiting for a request. Since the request we waited on will _always_ be out of the request tree, take a ref on the next request, in the hopes that it won't be. But if it is, it's ok: we can start over from the beginning (and traverse over older read requests again). Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-16 22:28:54 +00:00
req = nextreq;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
mutex_unlock(&mdsc->mutex);
dout("wait_unsafe_requests done\n");
}
void ceph_mdsc_sync(struct ceph_mds_client *mdsc)
{
u64 want_tid, want_flush;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
if (mdsc->fsc->mount_state == CEPH_MOUNT_SHUTDOWN)
ceph: skip mds sync on forced unmount Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03 22:22:00 +00:00
return;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
dout("sync\n");
mutex_lock(&mdsc->mutex);
want_tid = mdsc->last_tid;
want_flush = mdsc->cap_flush_seq;
mutex_unlock(&mdsc->mutex);
dout("sync want tid %lld flush_seq %lld\n", want_tid, want_flush);
ceph: flush dirty caps via the cap_dirty list Previously we were flushing dirty caps by passing an extra flag when traversing the delayed caps list. Besides being a bit ugly, that can also miss caps that are dirty but didn't result in a cap requeue: notably, mark_caps_dirty(). Separate the flushing into a separate helper, and traverse the cap_dirty list. This also brings i_dirty_item in line with i_dirty_caps: we are on the list IFF caps != 0. We carry an inode ref IFF dirty_caps|flushing_caps != 0. Lose the unused return value from __ceph_mark_caps_dirty(). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-14 21:27:38 +00:00
ceph_flush_dirty_caps(mdsc);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
wait_unsafe_requests(mdsc, want_tid);
wait_event(mdsc->cap_flushing_wq, check_cap_flush(mdsc, want_flush));
}
ceph: fix multiple mds session shutdown The use of a completion when waiting for session shutdown during umount is inappropriate, given the complexity of the condition. For multiple MDS's, this resulted in the umount thread spinning, often preventing the session close message from being processed in some cases. Switch to a waitqueue and defined a condition helper. This cleans things up nicely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-11 21:51:23 +00:00
/*
* true if all sessions are closed, or we force unmount
*/
ceph/mds_client.c: quiet sparse noise Quiet the following sparse noise: warning: symbol 'get_nonsnap_parent' was not declared. Should it be static? warning: symbol 'done_closing_sessions' was not declared. Should it be static? Local functions don't need external visability. Make them static. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Sage Weil <sage@newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-09-23 20:22:11 +00:00
static bool done_closing_sessions(struct ceph_mds_client *mdsc)
ceph: fix multiple mds session shutdown The use of a completion when waiting for session shutdown during umount is inappropriate, given the complexity of the condition. For multiple MDS's, this resulted in the umount thread spinning, often preventing the session close message from being processed in some cases. Switch to a waitqueue and defined a condition helper. This cleans things up nicely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-11 21:51:23 +00:00
{
int i, n = 0;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
if (mdsc->fsc->mount_state == CEPH_MOUNT_SHUTDOWN)
ceph: fix multiple mds session shutdown The use of a completion when waiting for session shutdown during umount is inappropriate, given the complexity of the condition. For multiple MDS's, this resulted in the umount thread spinning, often preventing the session close message from being processed in some cases. Switch to a waitqueue and defined a condition helper. This cleans things up nicely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-11 21:51:23 +00:00
return true;
mutex_lock(&mdsc->mutex);
for (i = 0; i < mdsc->max_sessions; i++)
if (mdsc->sessions[i])
n++;
mutex_unlock(&mdsc->mutex);
return n == 0;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
/*
* called after sb is ro.
*/
void ceph_mdsc_close_sessions(struct ceph_mds_client *mdsc)
{
struct ceph_mds_session *session;
int i;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
struct ceph_fs_client *fsc = mdsc->fsc;
unsigned long timeout = fsc->client->options->mount_timeout * HZ;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
dout("close_sessions\n");
/* close sessions */
ceph: fix multiple mds session shutdown The use of a completion when waiting for session shutdown during umount is inappropriate, given the complexity of the condition. For multiple MDS's, this resulted in the umount thread spinning, often preventing the session close message from being processed in some cases. Switch to a waitqueue and defined a condition helper. This cleans things up nicely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-11 21:51:23 +00:00
mutex_lock(&mdsc->mutex);
for (i = 0; i < mdsc->max_sessions; i++) {
session = __ceph_lookup_mds_session(mdsc, i);
if (!session)
continue;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
mutex_unlock(&mdsc->mutex);
ceph: fix multiple mds session shutdown The use of a completion when waiting for session shutdown during umount is inappropriate, given the complexity of the condition. For multiple MDS's, this resulted in the umount thread spinning, often preventing the session close message from being processed in some cases. Switch to a waitqueue and defined a condition helper. This cleans things up nicely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-11 21:51:23 +00:00
mutex_lock(&session->s_mutex);
__close_session(mdsc, session);
mutex_unlock(&session->s_mutex);
ceph_put_mds_session(session);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
mutex_lock(&mdsc->mutex);
}
ceph: fix multiple mds session shutdown The use of a completion when waiting for session shutdown during umount is inappropriate, given the complexity of the condition. For multiple MDS's, this resulted in the umount thread spinning, often preventing the session close message from being processed in some cases. Switch to a waitqueue and defined a condition helper. This cleans things up nicely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-11 21:51:23 +00:00
mutex_unlock(&mdsc->mutex);
dout("waiting for sessions to close\n");
wait_event_timeout(mdsc->session_close_wq, done_closing_sessions(mdsc),
timeout);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
/* tear down remaining sessions */
ceph: fix multiple mds session shutdown The use of a completion when waiting for session shutdown during umount is inappropriate, given the complexity of the condition. For multiple MDS's, this resulted in the umount thread spinning, often preventing the session close message from being processed in some cases. Switch to a waitqueue and defined a condition helper. This cleans things up nicely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-11 21:51:23 +00:00
mutex_lock(&mdsc->mutex);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
for (i = 0; i < mdsc->max_sessions; i++) {
if (mdsc->sessions[i]) {
session = get_session(mdsc->sessions[i]);
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-22 23:12:16 +00:00
__unregister_session(mdsc, session);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
mutex_unlock(&mdsc->mutex);
mutex_lock(&session->s_mutex);
remove_session_caps(session);
mutex_unlock(&session->s_mutex);
ceph_put_mds_session(session);
mutex_lock(&mdsc->mutex);
}
}
WARN_ON(!list_empty(&mdsc->cap_delay_list));
mutex_unlock(&mdsc->mutex);
ceph_cleanup_empty_realms(mdsc);
cancel_delayed_work_sync(&mdsc->delayed_work); /* cancel timer */
dout("stopped\n");
}
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
static void ceph_mdsc_stop(struct ceph_mds_client *mdsc)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
{
dout("stop\n");
cancel_delayed_work_sync(&mdsc->delayed_work); /* cancel timer */
if (mdsc->mdsmap)
ceph_mdsmap_destroy(mdsc->mdsmap);
kfree(mdsc->sessions);
ceph: do caps accounting per mds_client Caps related accounting is now being done per mds client instead of just being global. This prepares ground work for a later revision of the caps preallocated reservation list. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-17 23:16:12 +00:00
ceph_caps_finalize(mdsc);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
void ceph_mdsc_destroy(struct ceph_fs_client *fsc)
{
struct ceph_mds_client *mdsc = fsc->mdsc;
ceph: flush msgr_wq during mds_client shutdown The release method for mds connections uses a backpointer to the mds_client, so we need to flush the workqueue of any pending work (and ceph_connection references) prior to freeing the mds_client. This fixes an oops easily triggered under UML by while true ; do mount ... ; umount ... ; done Also fix an outdated comment: the flush in ceph_destroy_client only flushes OSD connections out. This bug is basically an artifact of the ceph -> ceph+libceph conversion. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-25 20:27:48 +00:00
dout("mdsc_destroy %p\n", mdsc);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
ceph_mdsc_stop(mdsc);
ceph: flush msgr_wq during mds_client shutdown The release method for mds connections uses a backpointer to the mds_client, so we need to flush the workqueue of any pending work (and ceph_connection references) prior to freeing the mds_client. This fixes an oops easily triggered under UML by while true ; do mount ... ; umount ... ; done Also fix an outdated comment: the flush in ceph_destroy_client only flushes OSD connections out. This bug is basically an artifact of the ceph -> ceph+libceph conversion. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-25 20:27:48 +00:00
/* flush out any connection work with references to us */
ceph_msgr_flush();
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
fsc->mdsc = NULL;
kfree(mdsc);
ceph: flush msgr_wq during mds_client shutdown The release method for mds connections uses a backpointer to the mds_client, so we need to flush the workqueue of any pending work (and ceph_connection references) prior to freeing the mds_client. This fixes an oops easily triggered under UML by while true ; do mount ... ; umount ... ; done Also fix an outdated comment: the flush in ceph_destroy_client only flushes OSD connections out. This bug is basically an artifact of the ceph -> ceph+libceph conversion. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-25 20:27:48 +00:00
dout("mdsc_destroy %p done\n", mdsc);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
/*
* handle mds map update.
*/
void ceph_mdsc_handle_map(struct ceph_mds_client *mdsc, struct ceph_msg *msg)
{
u32 epoch;
u32 maplen;
void *p = msg->front.iov_base;
void *end = p + msg->front.iov_len;
struct ceph_mdsmap *newmap, *oldmap;
struct ceph_fsid fsid;
int err = -EINVAL;
ceph_decode_need(&p, end, sizeof(fsid)+2*sizeof(u32), bad);
ceph_decode_copy(&p, &fsid, sizeof(fsid));
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
if (ceph_check_fsid(mdsc->fsc->client, &fsid) < 0)
ceph: fix debugfs entry, simplify fsid checks We may first learn our fsid from any of the mon, osd, or mds maps (whichever the monitor sends first). Consolidate checks in a single helper. Initialize the client debugfs entry then, since we need the fsid (and global_id) for the directory name. Also remove dead mount code. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 00:50:41 +00:00
return;
ceph: convert encode/decode macros to inlines This avoids the fugly pass by reference and makes the code a bit easier to read. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-14 16:59:09 +00:00
epoch = ceph_decode_32(&p);
maplen = ceph_decode_32(&p);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
dout("handle_map epoch %u len %d\n", epoch, (int)maplen);
/* do we need it? */
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
ceph_monc_got_mdsmap(&mdsc->fsc->client->monc, epoch);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
mutex_lock(&mdsc->mutex);
if (mdsc->mdsmap && epoch <= mdsc->mdsmap->m_epoch) {
dout("handle_map epoch %u <= our %u\n",
epoch, mdsc->mdsmap->m_epoch);
mutex_unlock(&mdsc->mutex);
return;
}
newmap = ceph_mdsmap_decode(&p, end);
if (IS_ERR(newmap)) {
err = PTR_ERR(newmap);
goto bad_unlock;
}
/* swap into place */
if (mdsc->mdsmap) {
oldmap = mdsc->mdsmap;
mdsc->mdsmap = newmap;
check_new_map(mdsc, newmap, oldmap);
ceph_mdsmap_destroy(oldmap);
} else {
mdsc->mdsmap = newmap; /* first mds map */
}
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
mdsc->fsc->sb->s_maxbytes = mdsc->mdsmap->m_max_file_size;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
__wake_requests(mdsc, &mdsc->waiting_for_map);
mutex_unlock(&mdsc->mutex);
schedule_delayed(mdsc);
return;
bad_unlock:
mutex_unlock(&mdsc->mutex);
bad:
pr_err("error decoding mdsmap %d\n", err);
return;
}
static struct ceph_connection *con_get(struct ceph_connection *con)
{
struct ceph_mds_session *s = con->private;
if (get_session(s)) {
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-22 23:12:16 +00:00
dout("mdsc con_get %p ok (%d)\n", s, atomic_read(&s->s_ref));
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
return con;
}
dout("mdsc con_get %p FAIL\n", s);
return NULL;
}
static void con_put(struct ceph_connection *con)
{
struct ceph_mds_session *s = con->private;
ceph: print debug message before put mds session The mds session, s, could be freed during ceph_put_mds_session. Move dout before ceph_put_mds_session. Signed-off-by: Henry C Chang <henry.cy.chang@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-11 10:29:52 +00:00
dout("mdsc con_put %p (%d)\n", s, atomic_read(&s->s_ref) - 1);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph_put_mds_session(s);
}
/*
* if the client is unresponsive for long enough, the mds will kill
* the session entirely.
*/
static void peer_reset(struct ceph_connection *con)
{
struct ceph_mds_session *s = con->private;
ceph: attempt mds reconnect if mds closes our session Currently, if our session is closed (due to a timeout, or explicit close, or whatever), we just sit there doing nothing unless/until the MDS restarts, at which point we try to reconnect. Change client to attempt an immediate reconnect if our session is closed. Note that currently the MDS doesn't support this, and our attempt will fail. We'll get a session CLOSE, our caps and dirty cap state will be dropped, and the client will be free to attempt to reconnect. That's clearly not as nice as a successful reconnect, but it at least allows us to try to carry on, and in the future the MDS will support a reconnect and we will fare better. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-18 20:59:12 +00:00
struct ceph_mds_client *mdsc = s->s_mdsc;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph: attempt mds reconnect if mds closes our session Currently, if our session is closed (due to a timeout, or explicit close, or whatever), we just sit there doing nothing unless/until the MDS restarts, at which point we try to reconnect. Change client to attempt an immediate reconnect if our session is closed. Note that currently the MDS doesn't support this, and our attempt will fail. We'll get a session CLOSE, our caps and dirty cap state will be dropped, and the client will be free to attempt to reconnect. That's clearly not as nice as a successful reconnect, but it at least allows us to try to carry on, and in the future the MDS will support a reconnect and we will fare better. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-18 20:59:12 +00:00
pr_warning("mds%d closed our session\n", s->s_mds);
send_mds_reconnect(mdsc, s);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
}
static void dispatch(struct ceph_connection *con, struct ceph_msg *msg)
{
struct ceph_mds_session *s = con->private;
struct ceph_mds_client *mdsc = s->s_mdsc;
int type = le16_to_cpu(msg->hdr.type);
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-22 23:12:16 +00:00
mutex_lock(&mdsc->mutex);
if (__verify_registered_session(mdsc, s) < 0) {
mutex_unlock(&mdsc->mutex);
goto out;
}
mutex_unlock(&mdsc->mutex);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
switch (type) {
case CEPH_MSG_MDS_MAP:
ceph_mdsc_handle_map(mdsc, msg);
break;
case CEPH_MSG_CLIENT_SESSION:
handle_session(s, msg);
break;
case CEPH_MSG_CLIENT_REPLY:
handle_reply(s, msg);
break;
case CEPH_MSG_CLIENT_REQUEST_FORWARD:
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-22 23:12:16 +00:00
handle_forward(mdsc, s, msg);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
break;
case CEPH_MSG_CLIENT_CAPS:
ceph_handle_caps(s, msg);
break;
case CEPH_MSG_CLIENT_SNAP:
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-22 23:12:16 +00:00
ceph_handle_snap(mdsc, s, msg);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
break;
case CEPH_MSG_CLIENT_LEASE:
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-22 23:12:16 +00:00
handle_lease(mdsc, s, msg);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
break;
default:
pr_err("received unknown message type %d %s\n", type,
ceph_msg_type_name(type));
}
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-22 23:12:16 +00:00
out:
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
ceph_msg_put(msg);
}
ceph: negotiate authentication protocol; implement AUTH_NONE protocol When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 00:19:57 +00:00
/*
* authentication
*/
ceph: have get_authorizer methods return pointers Have the get_authorizer auth_client method return a ceph_auth pointer rather than an integer, pointer-encoding any returned error value. This is to pave the way for making use of the returned value in an upcoming patch. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-16 20:16:39 +00:00
/*
* Note: returned pointer is the address of a structure that's
* managed separately. Caller must *not* attempt to free it.
*/
static struct ceph_auth_handshake *get_authorizer(struct ceph_connection *con,
ceph: use info returned by get_authorizer Rather than passing a bunch of arguments to be filled in with the content of the ceph_auth_handshake buffer now returned by the get_authorizer method, just use the returned information in the caller, and drop the unnecessary arguments. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-16 20:16:39 +00:00
int *proto, int force_new)
ceph: negotiate authentication protocol; implement AUTH_NONE protocol When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 00:19:57 +00:00
{
struct ceph_mds_session *s = con->private;
struct ceph_mds_client *mdsc = s->s_mdsc;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
struct ceph_auth_client *ac = mdsc->fsc->client->monc.auth;
ceph: messenger: reduce args to create_authorizer Make use of the new ceph_auth_handshake structure in order to reduce the number of arguments passed to the create_authorizor method in ceph_auth_client_ops. Use a local variable of that type as a shorthand in the get_authorizer method definitions. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-16 20:16:39 +00:00
struct ceph_auth_handshake *auth = &s->s_auth;
ceph: negotiate authentication protocol; implement AUTH_NONE protocol When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 00:19:57 +00:00
ceph: messenger: reduce args to create_authorizer Make use of the new ceph_auth_handshake structure in order to reduce the number of arguments passed to the create_authorizor method in ceph_auth_client_ops. Use a local variable of that type as a shorthand in the get_authorizer method definitions. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-16 20:16:39 +00:00
if (force_new && auth->authorizer) {
ceph: ensure auth ops are defined before use In the create_authorizer method for both the mds and osd clients, the auth_client->ops pointer is blindly dereferenced. There is no obvious guarantee that this pointer has been assigned. And furthermore, even if the ops pointer is non-null there is definitely no guarantee that the create_authorizer or destroy_authorizer methods are defined. Add checks in both routines to make sure they are defined (non-null) before use. Add similar checks in a few other spots in these files while we're at it. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-16 20:16:39 +00:00
if (ac->ops && ac->ops->destroy_authorizer)
ac->ops->destroy_authorizer(ac, auth->authorizer);
ceph: messenger: reduce args to create_authorizer Make use of the new ceph_auth_handshake structure in order to reduce the number of arguments passed to the create_authorizor method in ceph_auth_client_ops. Use a local variable of that type as a shorthand in the get_authorizer method definitions. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-16 20:16:39 +00:00
auth->authorizer = NULL;
ceph: negotiate authentication protocol; implement AUTH_NONE protocol When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 00:19:57 +00:00
}
ceph: ensure auth ops are defined before use In the create_authorizer method for both the mds and osd clients, the auth_client->ops pointer is blindly dereferenced. There is no obvious guarantee that this pointer has been assigned. And furthermore, even if the ops pointer is non-null there is definitely no guarantee that the create_authorizer or destroy_authorizer methods are defined. Add checks in both routines to make sure they are defined (non-null) before use. Add similar checks in a few other spots in these files while we're at it. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-16 20:16:39 +00:00
if (!auth->authorizer && ac->ops && ac->ops->create_authorizer) {
ceph: have get_authorizer methods return pointers Have the get_authorizer auth_client method return a ceph_auth pointer rather than an integer, pointer-encoding any returned error value. This is to pave the way for making use of the returned value in an upcoming patch. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-16 20:16:39 +00:00
int ret = ac->ops->create_authorizer(ac, CEPH_ENTITY_TYPE_MDS,
auth);
ceph: ensure auth ops are defined before use In the create_authorizer method for both the mds and osd clients, the auth_client->ops pointer is blindly dereferenced. There is no obvious guarantee that this pointer has been assigned. And furthermore, even if the ops pointer is non-null there is definitely no guarantee that the create_authorizer or destroy_authorizer methods are defined. Add checks in both routines to make sure they are defined (non-null) before use. Add similar checks in a few other spots in these files while we're at it. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-16 20:16:39 +00:00
if (ret)
ceph: have get_authorizer methods return pointers Have the get_authorizer auth_client method return a ceph_auth pointer rather than an integer, pointer-encoding any returned error value. This is to pave the way for making use of the returned value in an upcoming patch. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-16 20:16:39 +00:00
return ERR_PTR(ret);
ceph: negotiate authentication protocol; implement AUTH_NONE protocol When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 00:19:57 +00:00
}
*proto = ac->protocol;
ceph: messenger: reduce args to create_authorizer Make use of the new ceph_auth_handshake structure in order to reduce the number of arguments passed to the create_authorizor method in ceph_auth_client_ops. Use a local variable of that type as a shorthand in the get_authorizer method definitions. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-16 20:16:39 +00:00
ceph: have get_authorizer methods return pointers Have the get_authorizer auth_client method return a ceph_auth pointer rather than an integer, pointer-encoding any returned error value. This is to pave the way for making use of the returned value in an upcoming patch. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-16 20:16:39 +00:00
return auth;
ceph: negotiate authentication protocol; implement AUTH_NONE protocol When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 00:19:57 +00:00
}
static int verify_authorizer_reply(struct ceph_connection *con, int len)
{
struct ceph_mds_session *s = con->private;
struct ceph_mds_client *mdsc = s->s_mdsc;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
struct ceph_auth_client *ac = mdsc->fsc->client->monc.auth;
ceph: negotiate authentication protocol; implement AUTH_NONE protocol When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 00:19:57 +00:00
ceph: define ceph_auth_handshake type The definitions for the ceph_mds_session and ceph_osd both contain five fields related only to "authorizers." Encapsulate those fields into their own struct type, allowing for better isolation in some upcoming patches. Fix the #includes in "linux/ceph/osd_client.h" to lay out their more complete canonical path. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-16 20:16:38 +00:00
return ac->ops->verify_authorizer_reply(ac, s->s_auth.authorizer, len);
ceph: negotiate authentication protocol; implement AUTH_NONE protocol When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 00:19:57 +00:00
}
ceph: allow renewal of auth credentials Add infrastructure to allow the mon_client to periodically renew its auth credentials. Also add a messenger callback that will force such a renewal if a peer rejects our authenticator. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-03 00:21:06 +00:00
static int invalidate_authorizer(struct ceph_connection *con)
{
struct ceph_mds_session *s = con->private;
struct ceph_mds_client *mdsc = s->s_mdsc;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
struct ceph_auth_client *ac = mdsc->fsc->client->monc.auth;
ceph: allow renewal of auth credentials Add infrastructure to allow the mon_client to periodically renew its auth credentials. Also add a messenger callback that will force such a renewal if a peer rejects our authenticator. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-03 00:21:06 +00:00
if (ac->ops->invalidate_authorizer)
ac->ops->invalidate_authorizer(ac, CEPH_ENTITY_TYPE_MDS);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 22:14:15 +00:00
return ceph_monc_validate_auth(&mdsc->fsc->client->monc);
ceph: allow renewal of auth credentials Add infrastructure to allow the mon_client to periodically renew its auth credentials. Also add a messenger callback that will force such a renewal if a peer rejects our authenticator. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-03 00:21:06 +00:00
}
ceph: Storage class should be before const qualifier The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-20 08:40:19 +00:00
static const struct ceph_connection_operations mds_con_ops = {
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
.get = con_get,
.put = con_put,
.dispatch = dispatch,
ceph: negotiate authentication protocol; implement AUTH_NONE protocol When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 00:19:57 +00:00
.get_authorizer = get_authorizer,
.verify_authorizer_reply = verify_authorizer_reply,
ceph: allow renewal of auth credentials Add infrastructure to allow the mon_client to periodically renew its auth credentials. Also add a messenger callback that will force such a renewal if a peer rejects our authenticator. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-03 00:21:06 +00:00
.invalidate_authorizer = invalidate_authorizer,
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 18:31:09 +00:00
.peer_reset = peer_reset,
};
/* eof */